From 5be86f6886c240429aac197c9e8f51629d6302aa Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 26 Jul 2021 14:22:07 +0200 Subject: ARM: ixp4xx: Delete the Arcom Vulcan boardfiles This board is replaced with the corresponding device tree. Cc: Marc Zyngier Signed-off-by: Linus Walleij --- arch/arm/mach-ixp4xx/Kconfig | 8 - arch/arm/mach-ixp4xx/Makefile | 2 - arch/arm/mach-ixp4xx/vulcan-pci.c | 70 --------- arch/arm/mach-ixp4xx/vulcan-setup.c | 282 ------------------------------------ 4 files changed, 362 deletions(-) delete mode 100644 arch/arm/mach-ixp4xx/vulcan-pci.c delete mode 100644 arch/arm/mach-ixp4xx/vulcan-setup.c (limited to 'arch/arm/mach-ixp4xx') diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 04165bffa27a..3cdf9e656c5b 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -116,14 +116,6 @@ config MACH_FSG FSG-3 device. For more information on this platform, see http://www.nslu2-linux.org/wiki/FSG3/HomePage -config MACH_ARCOM_VULCAN - bool - prompt "Arcom/Eurotech Vulcan" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support Arcom's - Vulcan board. - # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index 738a37ccc7a1..53d8972ba4ff 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -16,7 +16,6 @@ obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o -obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-y += common.o @@ -28,6 +27,5 @@ obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o -obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c deleted file mode 100644 index caf53922dd3f..000000000000 --- a/arch/arm/mach-ixp4xx/vulcan-pci.c +++ /dev/null @@ -1,70 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arch/mach-ixp4xx/vulcan-pci.c - * - * Vulcan board-level PCI initialization - * - * Copyright (C) 2010 Marc Zyngier - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#include -#include -#include -#include -#include - -#include "irqs.h" - -/* PCI controller GPIO to IRQ pin mappings */ -#define INTA 2 -#define INTB 3 - -void __init vulcan_pci_preinit(void) -{ -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - /* - * Cardbus bridge wants way more than the SoC can actually offer, - * and leaves the whole PCI bus in a mess. Artificially limit it - * to 8MB per region. Of course indirect mode doesn't have this - * limitation... - */ - pci_cardbus_mem_size = SZ_8M; - pr_info("Vulcan PCI: limiting CardBus memory size to %dMB\n", - (int)(pci_cardbus_mem_size >> 20)); -#endif - irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); - ixp4xx_pci_preinit(); -} - -static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (slot == 1) - return IXP4XX_GPIO_IRQ(INTA); - - if (slot == 2) - return IXP4XX_GPIO_IRQ(INTB); - - return -1; -} - -struct hw_pci vulcan_pci __initdata = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = vulcan_pci_preinit, - .setup = ixp4xx_setup, - .map_irq = vulcan_map_irq, -}; - -int __init vulcan_pci_init(void) -{ - if (machine_is_arcom_vulcan()) - pci_common_init(&vulcan_pci); - return 0; -} - -subsys_initcall(vulcan_pci_init); diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c deleted file mode 100644 index e506d2af98ad..000000000000 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/arm/mach-ixp4xx/vulcan-setup.c - * - * Arcom/Eurotech Vulcan board-setup - * - * Copyright (C) 2010 Marc Zyngier - * - * based on fsg-setup.c: - * Copyright (C) 2008 Rod Whitby - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "irqs.h" - -static struct flash_platform_data vulcan_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource vulcan_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device vulcan_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &vulcan_flash_data, - }, - .resource = &vulcan_flash_resource, - .num_resources = 1, -}; - -static struct platdata_mtd_ram vulcan_sram_data = { - .mapname = "Vulcan SRAM", - .bankwidth = 1, -}; - -static struct resource vulcan_sram_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device vulcan_sram = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &vulcan_sram_data, - }, - .resource = &vulcan_sram_resource, - .num_resources = 1, -}; - -static struct resource vulcan_uart_resources[] = { - [0] = { - .start = IXP4XX_UART1_BASE_PHYS, - .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - [2] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct plat_serial8250_port vulcan_uart_data[] = { - [0] = { - .mapbase = IXP4XX_UART1_BASE_PHYS, - .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - [1] = { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - [2] = { - .irq = IXP4XX_GPIO_IRQ(4), - .irqflags = IRQF_TRIGGER_LOW, - .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .uartclk = 1843200, - }, - [3] = { - .irq = IXP4XX_GPIO_IRQ(4), - .irqflags = IRQF_TRIGGER_LOW, - .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .uartclk = 1843200, - }, - { } -}; - -static struct platform_device vulcan_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = vulcan_uart_data, - }, - .resource = vulcan_uart_resources, - .num_resources = ARRAY_SIZE(vulcan_uart_resources), -}; - -static struct resource vulcan_npeb_resources[] = { - { - .start = IXP4XX_EthB_BASE_PHYS, - .end = IXP4XX_EthB_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource vulcan_npec_resources[] = { - { - .start = IXP4XX_EthC_BASE_PHYS, - .end = IXP4XX_EthC_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct eth_plat_info vulcan_plat_eth[] = { - [0] = { - .phy = 0, - .rxq = 3, - .txreadyq = 20, - }, - [1] = { - .phy = 1, - .rxq = 4, - .txreadyq = 21, - }, -}; - -static struct platform_device vulcan_eth[] = { - [0] = { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEB, - .dev = { - .platform_data = &vulcan_plat_eth[0], - }, - .num_resources = ARRAY_SIZE(vulcan_npeb_resources), - .resource = vulcan_npeb_resources, - }, - [1] = { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEC, - .dev = { - .platform_data = &vulcan_plat_eth[1], - }, - .num_resources = ARRAY_SIZE(vulcan_npec_resources), - .resource = vulcan_npec_resources, - }, -}; - -static struct resource vulcan_max6369_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device vulcan_max6369 = { - .name = "max6369_wdt", - .id = -1, - .resource = &vulcan_max6369_resource, - .num_resources = 1, -}; - -static struct gpiod_lookup_table vulcan_w1_gpiod_table = { - .dev_id = "w1-gpio", - .table = { - GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", 14, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { - /* Intentionally left blank */ -}; - -static struct platform_device vulcan_w1_gpio = { - .name = "w1-gpio", - .id = 0, - .dev = { - .platform_data = &vulcan_w1_gpio_pdata, - }, -}; - -static struct platform_device *vulcan_devices[] __initdata = { - &vulcan_uart, - &vulcan_flash, - &vulcan_sram, - &vulcan_max6369, - &vulcan_eth[0], - &vulcan_eth[1], - &vulcan_w1_gpio, -}; - -static void __init vulcan_init(void) -{ - ixp4xx_sys_init(); - - /* Flash is spread over both CS0 and CS1 */ - vulcan_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - vulcan_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; - *IXP4XX_EXP_CS0 = IXP4XX_EXP_BUS_CS_EN | - IXP4XX_EXP_BUS_STROBE_T(3) | - IXP4XX_EXP_BUS_SIZE(0xF) | - IXP4XX_EXP_BUS_BYTE_RD16 | - IXP4XX_EXP_BUS_WR_EN; - *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; - - /* SRAM on CS2, (256kB, 8bit, writable) */ - vulcan_sram_resource.start = IXP4XX_EXP_BUS_BASE(2); - vulcan_sram_resource.end = IXP4XX_EXP_BUS_BASE(2) + SZ_256K - 1; - *IXP4XX_EXP_CS2 = IXP4XX_EXP_BUS_CS_EN | - IXP4XX_EXP_BUS_STROBE_T(1) | - IXP4XX_EXP_BUS_HOLD_T(2) | - IXP4XX_EXP_BUS_SIZE(9) | - IXP4XX_EXP_BUS_SPLT_EN | - IXP4XX_EXP_BUS_WR_EN | - IXP4XX_EXP_BUS_BYTE_EN; - - /* XR16L2551 on CS3 (Moto style, 512 bytes, 8bits, writable) */ - vulcan_uart_resources[2].start = IXP4XX_EXP_BUS_BASE(3); - vulcan_uart_resources[2].end = IXP4XX_EXP_BUS_BASE(3) + 16 - 1; - vulcan_uart_data[2].mapbase = vulcan_uart_resources[2].start; - vulcan_uart_data[3].mapbase = vulcan_uart_data[2].mapbase + 8; - *IXP4XX_EXP_CS3 = IXP4XX_EXP_BUS_CS_EN | - IXP4XX_EXP_BUS_STROBE_T(3) | - IXP4XX_EXP_BUS_CYCLES(IXP4XX_EXP_BUS_CYCLES_MOTOROLA)| - IXP4XX_EXP_BUS_WR_EN | - IXP4XX_EXP_BUS_BYTE_EN; - - /* GPIOS on CS4 (512 bytes, 8bits, writable) */ - *IXP4XX_EXP_CS4 = IXP4XX_EXP_BUS_CS_EN | - IXP4XX_EXP_BUS_WR_EN | - IXP4XX_EXP_BUS_BYTE_EN; - - /* max6369 on CS5 (512 bytes, 8bits, writable) */ - vulcan_max6369_resource.start = IXP4XX_EXP_BUS_BASE(5); - vulcan_max6369_resource.end = IXP4XX_EXP_BUS_BASE(5); - *IXP4XX_EXP_CS5 = IXP4XX_EXP_BUS_CS_EN | - IXP4XX_EXP_BUS_WR_EN | - IXP4XX_EXP_BUS_BYTE_EN; - - gpiod_add_lookup_table(&vulcan_w1_gpiod_table); - platform_add_devices(vulcan_devices, ARRAY_SIZE(vulcan_devices)); -} - -MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") - /* Maintainer: Marc Zyngier */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .atag_offset = 0x100, - .init_machine = vulcan_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END -- cgit v1.2.3