From 59b559d7a39b590aecef583af58d123ff5876570 Mon Sep 17 00:00:00 2001 From: Srinidhi Kasagar Date: Thu, 12 Nov 2009 06:20:54 +0100 Subject: ARM: 5786/1: Introduce plat-nomadik, MTU code re-organization Introduce the plat-nomadik folder for ST-Ericsson machines including the existing nomadik 8815 architecture. This also moves the existing MTU (MultiTimerUnit) of nomadik 8815 to the proposed plat-nomadik and adds HAS_MTU. The patch has been re-based to 2.6.32-rc6 Signed-off-by: srinidhi kasagar Acked-by: Alessandro Rubini Signed-off-by: Russell King --- arch/arm/mach-nomadik/Kconfig | 2 +- arch/arm/mach-nomadik/Makefile | 2 +- arch/arm/mach-nomadik/board-nhk8815.c | 27 +++++ arch/arm/mach-nomadik/include/mach/mtu.h | 45 -------- arch/arm/mach-nomadik/include/mach/setup.h | 2 +- arch/arm/mach-nomadik/timer.c | 164 ----------------------------- 6 files changed, 30 insertions(+), 212 deletions(-) delete mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h delete mode 100644 arch/arm/mach-nomadik/timer.c (limited to 'arch/arm/mach-nomadik') diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 2a02b49c40f0..3c5e0f522e9c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -5,13 +5,13 @@ menu "Nomadik boards" config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 + select HAS_MTU endmenu config NOMADIK_8815 bool - config I2C_BITBANG_8815NHK tristate "Driver for bit-bang busses found on the 8815 NHK" depends on I2C && MACH_NOMADIK_8815NHK diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile index 412040982a40..36f67fb207d2 100644 --- a/arch/arm/mach-nomadik/Makefile +++ b/arch/arm/mach-nomadik/Makefile @@ -7,7 +7,7 @@ # Object file lists. -obj-y += clock.o timer.o gpio.o +obj-y += clock.o gpio.o # Cpu revision obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 6bfd537d5afb..116394484e71 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -25,11 +25,18 @@ #include #include #include + +#include + #include #include #include #include "clock.h" +/* Initial value for SRC control register: all timers use MXTAL/8 source */ +#define SRC_CR_INIT_MASK 0x00007fff +#define SRC_CR_INIT_VAL 0x2aaa8000 + /* These adresses span 16MB, so use three individual pages */ static struct resource nhk8815_nand_resources[] = { { @@ -239,6 +246,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = { /* will add more devices */ }; +static void __init nomadik_timer_init(void) +{ + u32 src_cr; + + /* Configure timer sources in "system reset controller" ctrl reg */ + src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); + src_cr &= SRC_CR_INIT_MASK; + src_cr |= SRC_CR_INIT_VAL; + writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); + + /* Save global pointer to mtu, used by platform timer code */ + mtu_base = io_p2v(NOMADIK_MTU0_BASE); + + nmdk_timer_init(); +} + +static struct sys_timer nomadik_timer = { + .init = nomadik_timer_init, +}; + static void __init nhk8815_platform_init(void) { int i; diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h deleted file mode 100644 index 76da7f085330..000000000000 --- a/arch/arm/mach-nomadik/include/mach/mtu.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __ASM_ARCH_MTU_H -#define __ASM_ARCH_MTU_H - -/* - * The MTU device hosts four different counters, with 4 set of - * registers. These are register names. - */ - -#define MTU_IMSC 0x00 /* Interrupt mask set/clear */ -#define MTU_RIS 0x04 /* Raw interrupt status */ -#define MTU_MIS 0x08 /* Masked interrupt status */ -#define MTU_ICR 0x0C /* Interrupt clear register */ - -/* per-timer registers take 0..3 as argument */ -#define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */ -#define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */ -#define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */ -#define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */ - -/* bits for the control register */ -#define MTU_CRn_ENA 0x80 -#define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */ -#define MTU_CRn_PRESCALE_MASK 0x0c -#define MTU_CRn_PRESCALE_1 0x00 -#define MTU_CRn_PRESCALE_16 0x04 -#define MTU_CRn_PRESCALE_256 0x08 -#define MTU_CRn_32BITS 0x02 -#define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/ - -/* Other registers are usual amba/primecell registers, currently not used */ -#define MTU_ITCR 0xff0 -#define MTU_ITOP 0xff4 - -#define MTU_PERIPH_ID0 0xfe0 -#define MTU_PERIPH_ID1 0xfe4 -#define MTU_PERIPH_ID2 0xfe8 -#define MTU_PERIPH_ID3 0xfeC - -#define MTU_PCELL0 0xff0 -#define MTU_PCELL1 0xff4 -#define MTU_PCELL2 0xff8 -#define MTU_PCELL3 0xffC - -#endif /* __ASM_ARCH_MTU_H */ - diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h index a4e468cf63da..b7897edf1f35 100644 --- a/arch/arm/mach-nomadik/include/mach/setup.h +++ b/arch/arm/mach-nomadik/include/mach/setup.h @@ -15,7 +15,7 @@ extern void cpu8815_map_io(void); extern void cpu8815_platform_init(void); extern void cpu8815_init_irq(void); -extern struct sys_timer nomadik_timer; +extern void nmdk_timer_init(void); #endif /* NOMADIK_8815 */ diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c deleted file mode 100644 index d1738e7061d4..000000000000 --- a/arch/arm/mach-nomadik/timer.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * linux/arch/arm/mach-nomadik/timer.c - * - * Copyright (C) 2008 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define TIMER_CTRL 0x80 /* No divisor */ -#define TIMER_PERIODIC 0x40 -#define TIMER_SZ32BIT 0x02 - -/* Initial value for SRC control register: all timers use MXTAL/8 source */ -#define SRC_CR_INIT_MASK 0x00007fff -#define SRC_CR_INIT_VAL 0x2aaa8000 - -static u32 nmdk_count; /* accumulated count */ -static u32 nmdk_cycle; /* write-once */ -static __iomem void *mtu_base; - -/* - * clocksource: the MTU device is a decrementing counters, so we negate - * the value being read. - */ -static cycle_t nmdk_read_timer(struct clocksource *cs) -{ - u32 count = readl(mtu_base + MTU_VAL(0)); - return nmdk_count + nmdk_cycle - count; - -} - -static struct clocksource nmdk_clksrc = { - .name = "mtu_0", - .rating = 120, - .read = nmdk_read_timer, - .shift = 20, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -/* - * Clockevent device: currently only periodic mode is supported - */ -static void nmdk_clkevt_mode(enum clock_event_mode mode, - struct clock_event_device *dev) -{ - unsigned long flags; - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* enable interrupts -- and count current value? */ - raw_local_irq_save(flags); - writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); /* Not supported, yet */ - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq */ - raw_local_irq_save(flags); - writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC); - raw_local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device nmdk_clkevt = { - .name = "mtu_0", - .features = CLOCK_EVT_FEAT_PERIODIC, - .shift = 32, - .rating = 100, - .set_mode = nmdk_clkevt_mode, -}; - -/* - * IRQ Handler for the timer 0 of the MTU block. The irq is not shared - * as we are the only users of mtu0 by now. - */ -static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id) -{ - /* ack: "interrupt clear register" */ - writel( 1 << 0, mtu_base + MTU_ICR); - - /* we can't count lost ticks, unfortunately */ - nmdk_count += nmdk_cycle; - nmdk_clkevt.event_handler(&nmdk_clkevt); - - return IRQ_HANDLED; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -static struct irqaction nmdk_timer_irq = { - .name = "Nomadik Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = nmdk_timer_interrupt, -}; - -static void nmdk_timer_reset(void) -{ - u32 cr; - - writel(0, mtu_base + MTU_CR(0)); /* off */ - - /* configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS; - writel(cr, mtu_base + MTU_CR(0)); - writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); -} - -static void __init nmdk_timer_init(void) -{ - u32 src_cr; - unsigned long rate; - int bits; - - rate = CLOCK_TICK_RATE; /* 2.4MHz */ - nmdk_cycle = (rate + HZ/2) / HZ; - - /* Configure timer sources in "system reset controller" ctrl reg */ - src_cr = readl(io_p2v(NOMADIK_SRC_BASE)); - src_cr &= SRC_CR_INIT_MASK; - src_cr |= SRC_CR_INIT_VAL; - writel(src_cr, io_p2v(NOMADIK_SRC_BASE)); - - /* Save global pointer to mtu, used by functions above */ - mtu_base = io_p2v(NOMADIK_MTU0_BASE); - - /* Init the timer and register clocksource */ - nmdk_timer_reset(); - - nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); - bits = 8*sizeof(nmdk_count); - nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits); - - clocksource_register(&nmdk_clksrc); - - /* Register irq and clockevents */ - setup_irq(IRQ_MTU0, &nmdk_timer_irq); - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); - nmdk_clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&nmdk_clkevt); -} - -struct sys_timer nomadik_timer = { - .init = nmdk_timer_init, -}; -- cgit v1.2.3