From ec053ec90c245a4efc8dda87d9207de0adf0040e Mon Sep 17 00:00:00 2001 From: David Wronek Date: Thu, 24 Aug 2023 11:15:05 +0200 Subject: arm64: dts: qcom: pm6150: Add resin and rtc nodes Add support for the RTC which is the same as on other PMICs and add the resin child node to the PM6150 PON device, both disabled by default. Signed-off-by: David Wronek Tested-by: Nikita Travkin Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20230824091737.75813-3-davidwronek@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/pm6150.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch/arm64/boot/dts/qcom/pm6150.dtsi') diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index 7d4d1f2767ed..ddbaf7280b03 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -53,6 +53,14 @@ bias-pull-up; linux,code = ; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 { @@ -88,6 +96,14 @@ status = "disabled"; }; + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; -- cgit v1.2.3