From f87c88947396674586a42a163b72efa3999e3dee Mon Sep 17 00:00:00 2001 From: Vaishnav Achath Date: Thu, 15 Feb 2024 14:25:14 +0530 Subject: arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux J721E SK has the CSI2RX routed to a MIPI CSI connector and to 15-pin RPi camera connector through an analog mux with GPIO control, model that so that an overlay can control the mux state according to connected cameras. Also provide labels to the I2C mux bus instances so that a generic overlay can be used across multiple platforms. J721E SK schematics: https://www.ti.com/lit/zip/sprr438 Signed-off-by: Vaishnav Achath Reviewed-by: Jai Luthra Link: https://lore.kernel.org/r/20240215085518.552692-6-vaishnav.a@ti.com Signed-off-by: Vignesh Raghavendra --- arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'arch/arm64/boot/dts/ti') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 1da06e0479f2..0c4575ad8d7c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -286,6 +286,15 @@ }; }; }; + + csi_mux: mux-controller { + compatible = "gpio-mux"; + #mux-state-cells = <1>; + mux-gpios = <&main_gpio0 88 GPIO_ACTIVE_HIGH>; + idle-state = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&main_csi_mux_sel_pins_default>; + }; }; &main_pmx0 { @@ -352,6 +361,12 @@ >; }; + main_csi_mux_sel_pins_default: main-csi-mux-sel-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x164, PIN_OUTPUT, 7) /* (V29) RGMII5_TD2 */ + >; + }; + dp0_pins_default: dp0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ @@ -858,14 +873,14 @@ reg = <0x70>; /* CSI0 I2C */ - i2c@0 { + cam0_i2c: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; /* CSI1 I2C */ - i2c@1 { + cam1_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; -- cgit v1.2.3