From 6acd6ad562067e6c621c346e0134131bdb3b1080 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Mon, 18 May 2020 19:09:49 +0100 Subject: ARM: dts: qcom: add ethernet definitions to ipq8064 Plumb in the 4 IPQ8064 stmmac based ethernet interfaces. Signed-off-by: Jonathan McDowell Link: https://lore.kernel.org/r/723344332357b5eed957443ec4a705a080fcc2da.1589824955.git.noodles@earth.li Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 108 ++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index b912da9a3ff3..9c0d5510c805 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -597,6 +597,114 @@ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; }; + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; + + qsgmii_csr: syscon@1bb00000 { + compatible = "syscon"; + reg = <0x1bb00000 0x000001FF>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + gmac0: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37000000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac1: ethernet@37200000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37200000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE2_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE2_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac2: ethernet@37400000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37400000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE3_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE3_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac3: ethernet@37600000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37600000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE4_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE4_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; regulator-name = "SDCC Power"; -- cgit v1.2.3 From 5de14398b6611af89a253f3fa13c20a92d53a513 Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Mon, 18 May 2020 19:10:14 +0100 Subject: ARM: dts: qcom: Add MikroTik RB3011 This patch adds a DTS file for the MikroTik RouterBoard 3011, which is a 1U rackmount router based on the IPQ8064, supporting the serial UART, dual QCA8337 Gigabit ethernet switches, boot loader NOR and user LED device. Signed-off-by: Jonathan McDowell Link: https://lore.kernel.org/r/75390e66c9e6e36ddd42dc7f54cac28dfd7a24b9.1589824955.git.noodles@earth.li Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 308 ++++++++++++++++++++++++++++++ 2 files changed, 309 insertions(+) create mode 100644 arch/arm/boot/dts/qcom-ipq8064-rb3011.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e8dd99201397..e697a4bd7426 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -884,6 +884,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ + qcom-ipq8064-rb3011.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8974-fairphone-fp2.dtb \ diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts new file mode 100644 index 000000000000..282b89ce3d45 --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-ipq8064.dtsi" +#include + +/ { + model = "MikroTik RB3011UiAS-RM"; + compatible = "mikrotik,rb3011"; + + aliases { + serial0 = &gsbi7_serial; + ethernet0 = &gmac0; + ethernet1 = &gmac3; + mdio-gpio0 = &mdio0; + mdio-gpio1 = &mdio1; + }; + + chosen { + bootargs = "loglevel=8 console=ttyMSM0,115200"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + reg = <0x42000000 0x3e000000>; + device_type = "memory"; + }; + + mdio0: mdio@0 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + switch0: switch@10 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <0 0>; + + pinctrl-0 = <&sw0_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw1"; + }; + + port@2 { + reg = <2>; + label = "sw2"; + }; + + port@3 { + reg = <3>; + label = "sw3"; + }; + + port@4 { + reg = <4>; + label = "sw4"; + }; + + port@5 { + reg = <5>; + label = "sw5"; + }; + }; + }; + }; + + mdio1: mdio@1 { + status = "okay"; + compatible = "virtual,mdio-gpio"; + gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>, + <&qcom_pinmux 10 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&mdio1_pins>; + pinctrl-names = "default"; + + switch1: switch@14 { + compatible = "qca,qca8337"; + #address-cells = <1>; + #size-cells = <0>; + + dsa,member = <1 0>; + + pinctrl-0 = <&sw1_reset_pin>; + pinctrl-names = "default"; + + reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>; + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch1cpu: port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&gmac3>; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "sw6"; + }; + + port@2 { + reg = <2>; + label = "sw7"; + }; + + port@3 { + reg = <3>; + label = "sw8"; + }; + + port@4 { + reg = <4>; + label = "sw9"; + }; + + port@5 { + reg = <5>; + label = "sw10"; + }; + }; + }; + }; + + soc { + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "okay"; + + spi4: spi@1a280000 { + status = "okay"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + norflash: s25fl016k@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "RouterBoot"; + reg = <0x0 0x40000>; + }; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = ; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "rb3011:green:user"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&switch0cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac3 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&switch1cpu>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi7 { + status = "okay"; + qcom,mode = ; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&qcom_pinmux { + buttons_pins: buttons_pins { + mux { + pins = "gpio66"; + drive-strength = <16>; + bias-disable; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio33"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdio1_pins: mdio1_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + sw0_reset_pin: sw0_reset_pin { + mux { + pins = "gpio16"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; + + sw1_reset_pin: sw1_reset_pin { + mux { + pins = "gpio17"; + drive-strength = <16>; + function = "gpio"; + bias-disable; + input-disable; + }; + }; +}; -- cgit v1.2.3 From 817ef1a456da7ffbc680763180f23af1fc05815f Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 7 May 2020 08:18:12 +0930 Subject: ARM: dts: aspeed: rainier: System has one SPI NOR Remove the second as it doesn't exist. Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index bdfe342bf7c5..919b895846c6 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -656,13 +656,6 @@ spi-max-frequency = <50000000>; #include "openbmc-flash-layout-128.dtsi" }; - - flash@1 { - status = "okay"; - m25p,fast-read; - label = "alt-bmc"; - spi-max-frequency = <50000000>; - }; }; &spi1 { -- cgit v1.2.3 From f806a23c0dbde50107139368b5085acb5219a4af Mon Sep 17 00:00:00 2001 From: Ben Pai Date: Fri, 5 Jun 2020 18:06:14 +0800 Subject: ARM: dts: aspeed: mihawk: IO expander uses TCA9554 driver Set smbus_en of IO expander to 1 in order to be able to read sensor. Signed-off-by: Ben Pai Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 112 ++++++++++++++++++++++++++++ 1 file changed, 112 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index 60e545b6396f..0940339aa808 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -820,12 +820,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus0"; + }; + }; }; bus9_mux232: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus1 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus1"; + }; + }; }; bus9_mux233: i2c@2 { @@ -855,12 +883,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus2 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus2"; + }; + }; }; bus9_mux236: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus3 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus3"; + }; + }; }; bus9_mux237: i2c@2 { @@ -909,12 +965,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus4 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus4"; + }; + }; }; bus10_mux240: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus5 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus5"; + }; + }; }; bus10_mux241: i2c@2 { @@ -944,12 +1028,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus6 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus6"; + }; + }; }; bus10_mux244: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus7 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus7"; + }; + }; }; bus10_mux245: i2c@2 { -- cgit v1.2.3 From 33f466eef90694b812c79a26f560502784971d0f Mon Sep 17 00:00:00 2001 From: Ben Pai Date: Fri, 5 Jun 2020 18:06:28 +0800 Subject: ARM: dts: aspeed: mihawk: Add 8 tmp401 thermal sensors Signed-off-by: Ben Pai Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 40 +++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index 0940339aa808..cb85168f6761 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -834,6 +834,11 @@ line-name = "smbus0"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus9_mux232: i2c@1 { @@ -854,6 +859,11 @@ line-name = "smbus1"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus9_mux233: i2c@2 { @@ -897,6 +907,11 @@ line-name = "smbus2"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus9_mux236: i2c@1 { @@ -917,6 +932,11 @@ line-name = "smbus3"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus9_mux237: i2c@2 { @@ -979,6 +999,11 @@ line-name = "smbus4"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus10_mux240: i2c@1 { @@ -999,6 +1024,11 @@ line-name = "smbus5"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus10_mux241: i2c@2 { @@ -1042,6 +1072,11 @@ line-name = "smbus6"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus10_mux244: i2c@1 { @@ -1062,6 +1097,11 @@ line-name = "smbus7"; }; }; + + tmp431@4c { + compatible = "ti,tmp401"; + reg = <0x4c>; + }; }; bus10_mux245: i2c@2 { -- cgit v1.2.3 From d644853ff8fcbb7a4e3757f9d8ccc39d930b7e3c Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 28 May 2020 10:15:25 +0200 Subject: ARM: dts: exynos: Extend all Exynos5800 A15's OPPs with max voltage data On Exynos5422/5800 the regulator supply for the A15 cores ("vdd_arm") is coupled with the regulator supply for the SoC internal circuits ("vdd_int"), thus all operating points that modify one of those supplies have to specify a triplet of the min/target/max values to properly work with regulator coupling. Fixes: eaffc4de16c6 ("ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800") Cc: Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5800.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index dfb99ab53c3e..526729dad53f 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -23,17 +23,17 @@ &cluster_a15_opp_table { opp-2000000000 { opp-hz = /bits/ 64 <2000000000>; - opp-microvolt = <1312500>; + opp-microvolt = <1312500 1312500 1500000>; clock-latency-ns = <140000>; }; opp-1900000000 { opp-hz = /bits/ 64 <1900000000>; - opp-microvolt = <1262500>; + opp-microvolt = <1262500 1262500 1500000>; clock-latency-ns = <140000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1237500>; + opp-microvolt = <1237500 1237500 1500000>; clock-latency-ns = <140000>; }; opp-1700000000 { -- cgit v1.2.3 From 4464005a12b5c79e1a364e6272ee10a83413f928 Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Thu, 28 May 2020 06:46:58 +0530 Subject: arm64: dts: exynos: Add UFS node to Exynos7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add UFS and UFS-PHY device nods to Exynos7 SoC and Espresso board. Signed-off-by: Alim Akhtar Tested-by: Paweł Chmiel Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 4 +++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 43 +++++++++++++++++++++++-- 2 files changed, 45 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 7af288fa9475..790f12ca8981 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -406,6 +406,10 @@ }; }; +&ufs { + status = "okay"; +}; + &usbdrd_phy { vbus-supply = <&usb30_vbus_reg>; vbus-boost-supply = <&usb3drd_boost_5v>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 5558045637ac..300ad7326ea8 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -220,9 +220,14 @@ #clock-cells = <1>; clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, <&clock_top1 DOUT_SCLK_MMC0>, - <&clock_top1 DOUT_SCLK_MMC1>; + <&clock_top1 DOUT_SCLK_MMC1>, + <&clock_top1 DOUT_SCLK_UFSUNIPRO20>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>; clock-names = "fin_pll", "dout_aclk_fsys1_200", - "dout_sclk_mmc0", "dout_sclk_mmc1"; + "dout_sclk_mmc0", "dout_sclk_mmc1", + "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1", + "dout_sclk_phy_fsys1_26m"; }; serial_0: serial@13630000 { @@ -601,6 +606,40 @@ }; }; + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, /* 0: HCI standard */ + <0x15570100 0x100>, /* 1: Vendor specificed */ + <0x15571000 0x200>, /* 2: UNIPRO */ + <0x15572000 0x300>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = ; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", + "tx0_symbol_clk"; + }; + usbdrd_phy: phy@15500000 { compatible = "samsung,exynos7-usbdrd-phy"; reg = <0x15500000 0x100>; -- cgit v1.2.3 From 3fb7fa49979e4ab3d593be21fbf42cd85530ee38 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 3 Jun 2020 12:46:47 +0200 Subject: ARM: dts: exynos: Enable Bluetooth support for Artik5 board Add a node for the BCM4354 Bluetooth chip on the serial bus #0 on the Exynos3250-based Artik5 boards. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos3250-artik5.dtsi | 41 ++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index b27a82072365..6c2f320be2f4 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -352,6 +352,14 @@ }; &pinctrl_1 { + bten: bten { + samsung,pins ="gpx1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + wlanen: wlanen { samsung,pins = "gpx2-3"; samsung,pin-function = ; @@ -364,6 +372,22 @@ samsung,pins = "gpx3-5"; samsung,pin-pud = ; }; + + bthostwake: bthostwake { + samsung,pins = "gpx3-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; + + btwake: btwake { + samsung,pins = "gpx3-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-con-pdn = ; + samsung,pin-pud-pdn = ; + }; }; &rtc { @@ -372,6 +396,23 @@ status = "okay"; }; +&serial_0 { + assigned-clocks = <&cmu CLK_SCLK_UART0>; + assigned-clock-rates = <100000000>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bten &btwake &bthostwake>; + max-speed = <3000000>; + shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>; + clocks = <&s2mps14_osc S2MPS11_CLK_BT>; + }; +}; + &tmu { status = "okay"; }; -- cgit v1.2.3 From 5b293570913fad10fe30e79cb981a83d486f8d72 Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sat, 13 Jun 2020 11:44:23 -0700 Subject: ARM: dts: s5pv210: Add interrupt-controller property to gph3 The GPH3 pins on s5pv210 have interrupt support and had the interrupt-cells property but was missing the interrupt-controller property. Signed-off-by: Jonathan Bakker Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi index 5e8b66281f01..b8c5172c31dd 100644 --- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -273,6 +273,8 @@ gph3: gph3 { gpio-controller; #gpio-cells = <2>; + + interrupt-controller; #interrupt-cells = <2>; }; -- cgit v1.2.3 From 99bb20321f0e4886c8f7c12f3406828b24f00d9c Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sat, 13 Jun 2020 11:44:24 -0700 Subject: ARM: dts: s5pv210: Correct fuelgauge definition on Aries Correct the fuelgauge definition because only the fuelgauge on fascinate4g has interrupt support (and even then it was wrong). Also, assign the GPIO pinctrl so the interrupt is properly configured Signed-off-by: Jonathan Bakker Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-aries.dtsi | 4 +--- arch/arm/boot/dts/s5pv210-fascinate4g.dts | 17 +++++++++++++++++ 2 files changed, 18 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index cf858029292e..d3aeafc0f650 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -425,10 +425,8 @@ pinctrl-names = "default"; pinctrl-0 = <&fg_i2c_pins>; - fuelgauge@36 { + fg: fuelgauge@36 { compatible = "maxim,max17040"; - interrupt-parent = <&vic0>; - interrupts = <7>; reg = <0x36>; }; }; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index 5e1b81823a8d..65eed01cfced 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -37,10 +37,27 @@ }; }; +&fg { + compatible = "maxim,max77836-battery"; + + interrupt-parent = <&gph3>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_irq>; +}; + &pinctrl0 { pinctrl-names = "default"; pinctrl-0 = <&sleep_cfg>; + fg_irq: fg-irq { + samsung,pins = "gph3-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + /* Based on vendor kernel v2.6.35.7 */ sleep_cfg: sleep-cfg { PIN_SLP(gpa0-0, PREV, NONE); -- cgit v1.2.3 From 7c558af511d01ef0ab0fe1692517f80d27e17cc3 Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sat, 13 Jun 2020 11:44:25 -0700 Subject: ARM: dts: s5pv210: Add support for GP2A light sensor on Aries Aries boards have a GP2A light/proximity sensor attached over i2c-gpio. As the chip outputs a current and the board has no current ADC, a current shunt resistor and a voltage ADC are used. Signed-off-by: Jonathan Bakker Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-aries.dtsi | 50 ++++++++++++++++++++++++++++++++++-- 1 file changed, 48 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index d3aeafc0f650..b27d7c2e6dca 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -69,6 +69,18 @@ pinctrl-0 = <&touchkey_vdd_ena>; }; + gp2a_vled: regulator-fixed-2 { + compatible = "regulator-fixed"; + regulator-name = "VLED"; + enable-active-high; + gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_power>; + }; + wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; @@ -468,9 +480,21 @@ pinctrl-names = "default"; pinctrl-0 = <&prox_i2c_pins>; - status = "disabled"; + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupt-parent = <&gph0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&gp2a_vled>; + vio-supply = <&gp2a_vled>; + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x20>; - /* Sharp gp2a prox/light sensor, incomplete mainline binding */ + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_irq>; + }; }; i2c_magnetometer: i2c-gpio-7 { @@ -543,6 +567,14 @@ vdd-supply = <&ldo4_reg>; status = "okay"; + + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&adc 9>; + shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */ + #io-channel-cells = <0>; + io-channel-ranges; + }; }; &fimd { @@ -618,6 +650,13 @@ samsung,pin-pud = ; }; + gp2a_irq: gp2a-irq { + samsung,pins = "gph0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + pmic_dvs_pins: pmic-dvs-pins { samsung,pins = "gph0-3", "gph0-4", "gph0-5"; samsung,pin-function = ; @@ -686,6 +725,13 @@ samsung,pin-drv = ; }; + gp2a_power: gp2a-power { + samsung,pins = "gpj1-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + touchkey_i2c_pins: touchkey-i2c-pins { samsung,pins = "gpj3-0", "gpj3-1"; samsung,pin-pud = ; -- cgit v1.2.3 From c713a4e3e826c07579df9c32b4d10bb5e1857c7d Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sat, 13 Jun 2020 11:44:26 -0700 Subject: ARM: dts: s5pv210: Add BMA023 accelerometer support to Aries Aries boards have a BMA023 accelerometer attached over i2c-gpio. Signed-off-by: Jonathan Bakker Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-aries.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index b27d7c2e6dca..92ec0e133b25 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -149,9 +149,13 @@ pinctrl-names = "default"; pinctrl-0 = <&accel_i2c_pins>; - status = "disabled"; + accelerometer@38 { + compatible = "bosch,bma023"; + reg = <0x38>; - /* bma023 accelerometer, no mainline binding */ + vdd-supply = <&ldo9_reg>; + vddio-supply = <&ldo9_reg>; + }; }; i2c_pmic: i2c-gpio-2 { -- cgit v1.2.3 From 1c65b6184441bdbdab2fae2984354f2038b8b6f7 Mon Sep 17 00:00:00 2001 From: Jonathan Bakker Date: Sat, 13 Jun 2020 11:44:27 -0700 Subject: ARM: dts: s5pv210: Correct BCM4329 bluetooth node There are several issues with the bluetooth node - the wrong compatible was used (because the bcm4329 compatible didn't exist when the node was added), the max rate was incorrect (due to limitations in the samsung TTY driver which have now been fixed), the clocks were not assigned properly so some rates didn't work, and the some pinctrl settings weren't explicitly set. Fix all of the above issues. While we're at it, update from the deprecated host-wakeup-gpios property to the host-wake interrupt. Signed-off-by: Jonathan Bakker Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s5pv210-aries.dtsi | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi index 92ec0e133b25..822207f63ee0 100644 --- a/arch/arm/boot/dts/s5pv210-aries.dtsi +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -629,6 +629,13 @@ }; &pinctrl0 { + bt_reset: bt-reset { + samsung,pins = "gpb-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = ; + }; + wlan_bt_en: wlan-bt-en { samsung,pins = "gpb-5"; samsung,pin-function = ; @@ -654,6 +661,12 @@ samsung,pin-pud = ; }; + bt_wake: bt-wake { + samsung,pins = "gpg3-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + gp2a_irq: gp2a-irq { samsung,pins = "gph0-2"; samsung,pin-function = ; @@ -845,16 +858,23 @@ }; &uart0 { + assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>; + assigned-clock-rates = <0>, <111166667>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + status = "okay"; bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <115200>; + compatible = "brcm,bcm4329-bt"; + max-speed = <3000000>; pinctrl-names = "default"; - pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake + &bt_reset &bt_wake>; shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gph2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; }; }; -- cgit v1.2.3 From 9af42b81cfc7f48d5384fc6a6c382dc716b45563 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:43 +0100 Subject: ARM: dts: r8a7742: Add I2C and IIC support Add the I2C[0-3] and IIC[0-3] device nodes to the R8A7742 device tree. Automatic transmission for PMIC control is not available on IIC3 hence compatible strings "renesas,rcar-gen2-iic" and "renesas,rmobile-iic" are not added to iic3 node. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1589555337-5498-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 122 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 305d8086a3dd..f28c32d239f5 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -359,6 +359,128 @@ ranges = <0 0 0xe6300000 0x40000>; }; + i2c0: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7742", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 931>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7742", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6518000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 930>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7742", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6530000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 929>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7742", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6540000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 928>; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7742", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 318>; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7742", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 323>; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 323>; + status = "disabled"; + }; + + iic2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7742", + "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 300>; + dmas = <&dmac0 0x69>, <&dmac0 0x6a>, + <&dmac1 0x69>, <&dmac1 0x6a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7742"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7742", "renesas,rcar-dmac"; -- cgit v1.2.3 From 3ab2ea5fd1ce3c61d67d7b737c361bec2ec6441f Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:46 +0100 Subject: ARM: dts: r8a7742: Add SDHI nodes Add the SDHI device nodes to the R8A7742 device tree. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index f28c32d239f5..056547210bad 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -717,6 +717,66 @@ status = "disabled"; }; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7742", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7742", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = ; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7742", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7742", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + mmcif1: mmc@ee220000 { compatible = "renesas,mmcif-r8a7742", "renesas,sh-mmcif"; -- cgit v1.2.3 From 9493c8c34cb4b683917a0d2e82cc5df859b1e5a4 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:47 +0100 Subject: ARM: dts: r8a7742: Add MMC0 node Describe MMC0 device node in the R8A7742 device tree. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 056547210bad..ca1a016f647b 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -777,6 +777,22 @@ status = "disabled"; }; + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7742", + "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = ; + clocks = <&cpg CPG_MOD 315>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 315>; + reg-io-width = <4>; + status = "disabled"; + max-frequency = <97500000>; + }; + mmcif1: mmc@ee220000 { compatible = "renesas,mmcif-r8a7742", "renesas,sh-mmcif"; -- cgit v1.2.3 From b9884a16398161bea177f48ddc05884741a8b944 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:49 +0100 Subject: ARM: dts: r8a7742: Add SATA nodes Add the SATA device nodes to the R8A7742 device tree. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index ca1a016f647b..553b92f2de62 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -809,6 +809,28 @@ max-frequency = <97500000>; }; + sata0: sata@ee300000 { + compatible = "renesas,sata-r8a7742", + "renesas,rcar-gen2-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = ; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + sata1: sata@ee500000 { + compatible = "renesas,sata-r8a7742", + "renesas,rcar-gen2-sata"; + reg = <0 0xee500000 0 0x200000>; + interrupts = ; + clocks = <&cpg CPG_MOD 814>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 814>; + status = "disabled"; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From 9451f394e9cfb30e5a9b66f1022ef7f91717548b Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:52 +0100 Subject: ARM: dts: r8a7742: Add Ethernet AVB support Add Ethernet AVB support for R8A7742 SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-13-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 553b92f2de62..925bc8af3809 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -547,6 +547,19 @@ dma-channels = <15>; }; + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7742", + "renesas,etheravb-rcar-gen2"; + reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; + interrupts = ; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 812>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + scifa0: serial@e6c40000 { compatible = "renesas,scifa-r8a7742", "renesas,rcar-gen2-scifa", "renesas,scifa"; -- cgit v1.2.3 From 8cbef867e1c56ce57b942b751a033585f70b0547 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:53 +0100 Subject: ARM: dts: r8a7742: Add Ether support Define the generic R8A7742 part of the Ether device node. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-14-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 925bc8af3809..1fe65f76be94 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -844,6 +844,20 @@ status = "disabled"; }; + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7742", + "renesas,rcar-gen2-ether"; + reg = <0 0xee700000 0 0x400>; + interrupts = ; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 813>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From 57e7dad22bdb4bffa158d32a2e9d5b7145ab1e85 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 15 May 2020 16:08:55 +0100 Subject: ARM: dts: r8a7742: Add APMU nodes Add DT nodes for the Advanced Power Management Units (APMU), and use the enable-method to point out that the APMU should be used for SMP support. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1589555337-5498-16-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 1fe65f76be94..da75767870c7 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -18,6 +18,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -305,6 +306,18 @@ #reset-cells = <1>; }; + apmu@e6151000 { + compatible = "renesas,r8a7742-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7742-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + rst: reset-controller@e6160000 { compatible = "renesas,r8a7742-rst"; reg = <0 0xe6160000 0 0x0100>; -- cgit v1.2.3 From b06424ceec398d998feb2ae2a529b604f3d1e303 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 May 2020 11:54:31 +0200 Subject: ARM: dts: r9a06g032: Correct GIC compatible value order According to commit 61efb56e30f1c54e ("dt-bindings: arm: gic: Allow combining arm,gic-400 compatible strings"), "arm,gic-400" should be listed first. Signed-off-by: Geert Uytterhoeven Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/20200519095431.5650-1-geert+renesas@glider.be --- arch/arm/boot/dts/r9a06g032.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi index 4c1ab49c7d39..ee59cc84f212 100644 --- a/arch/arm/boot/dts/r9a06g032.dtsi +++ b/arch/arm/boot/dts/r9a06g032.dtsi @@ -174,7 +174,7 @@ }; gic: interrupt-controller@44101000 { - compatible = "arm,cortex-a7-gic", "arm,gic-400"; + compatible = "arm,gic-400", "arm,cortex-a7-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x44101000 0x1000>, /* Distributer */ -- cgit v1.2.3 From 72d1a34e3cedbb48513db50bb651c5ccf53e5a27 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Fri, 22 May 2020 19:37:21 +0100 Subject: ARM: dts: r8a7742: Add RWDT node Add a device node for the Watchdog Timer (RWDT) controller on the Renesas RZ/G1H (r8a7742) SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/1590172641-1556-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index da75767870c7..df914dad3839 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -201,6 +201,17 @@ #size-cells = <2>; ranges; + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a7742-wdt", + "renesas,rcar-gen2-wdt"; + reg = <0 0xe6020000 0 0x0c>; + interrupts = ; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7742", "renesas,rcar-gen2-gpio"; -- cgit v1.2.3 From 4bb19c91d38e36b81e92de3d9b4e61d9b8928b54 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Sun, 24 May 2020 22:37:55 +0100 Subject: ARM: dts: r8a7742: Add USB 2.0 host support Describe internal PCI bridge devices, USB phy device and link PCI USB devices to USB phy. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590356277-19993-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 115 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 115 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index df914dad3839..5be3da7ed994 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -505,6 +505,28 @@ status = "disabled"; }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7742", + "renesas,rcar-gen2-usb-phy"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cpg CPG_MOD 704>; + clock-names = "usbhs"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 704>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7742", "renesas,rcar-dmac"; @@ -754,6 +776,99 @@ status = "disabled"; }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7742", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0b0000 { + compatible = "renesas,pci-r8a7742", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0 0xee0b0000 0 0xc00>, + <0 0xee0a0000 0 0x1100>; + interrupts = ; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 703>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci2: pci@ee0d0000 { + compatible = "renesas,pci-r8a7742", + "renesas,pci-rcar-gen2"; + device_type = "pci"; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 703>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = ; + status = "disabled"; + + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x20800 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x21000 0 0 0 0>; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7742", "renesas,rcar-gen2-sdhi"; -- cgit v1.2.3 From b8618745829de50563470cd1e58c7ea10d6481b6 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Sun, 24 May 2020 22:37:56 +0100 Subject: ARM: dts: r8a7742: Add USB-DMAC and HSUSB device nodes Add USB DMAC and HSUSB device nodes on RZ/G1H SoC dtsi. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590356277-19993-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 45 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 5be3da7ed994..cbf3d85abac4 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -505,6 +505,23 @@ status = "disabled"; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7742", + "renesas,rcar-gen2-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = ; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 704>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7742", "renesas,rcar-gen2-usb-phy"; @@ -527,6 +544,34 @@ }; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a7742-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = , + ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a7742-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = , + ; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a7742", "renesas,rcar-dmac"; -- cgit v1.2.3 From ab586be87ed2cc94701b1ae70956ae1fad6ae992 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Sun, 24 May 2020 22:37:57 +0100 Subject: ARM: dts: r8a7742: Add XHCI support Add XHCI support to R8A7742 SoC DT. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590356277-19993-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index cbf3d85abac4..3a9c67b2cc24 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -821,6 +821,19 @@ status = "disabled"; }; + xhci: usb@ee000000 { + compatible = "renesas,xhci-r8a7742", + "renesas,rcar-gen2-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = ; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 328>; + phys = <&usb2 1>; + phy-names = "usb"; + status = "disabled"; + }; + pci0: pci@ee090000 { compatible = "renesas,pci-r8a7742", "renesas,pci-rcar-gen2"; -- cgit v1.2.3 From 73e44613f65d55ffd3e767f77580094618f36b27 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 25 May 2020 16:22:06 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Enable SCIFB2 node Enable SCIFB2 interface on iWave RZ/G1H carrier board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590420129-7531-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 1f5c35c66d91..e154e3ad657c 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -14,6 +14,7 @@ aliases { serial2 = &scifa2; + serial4 = &scifb2; }; chosen { @@ -27,6 +28,11 @@ groups = "scifa2_data_c"; function = "scifa2"; }; + + scifb2_pins: scifb2 { + groups = "scifb2_data", "scifb2_ctrl"; + function = "scifb2"; + }; }; &scifa2 { @@ -35,3 +41,11 @@ status = "okay"; }; + +&scifb2 { + pinctrl-0 = <&scifb2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; -- cgit v1.2.3 From b3850cd90edc0baad2ec47293f4ec3c929de6f76 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 25 May 2020 16:22:07 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Enable SDHI2 controller Enable the SDHI2 controller on iWave RZ/G1H carrier board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590420129-7531-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 47 +++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index e154e3ad657c..bb1deb09e41f 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -21,6 +21,28 @@ bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait"; stdout-path = "serial2:115200n8"; }; + + vcc_sdhi2: regulator-vcc-sdhi2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi2: regulator-vccq-sdhi2 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + }; }; &pfc { @@ -33,6 +55,18 @@ groups = "scifb2_data", "scifb2_ctrl"; function = "scifb2"; }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; }; &scifa2 { @@ -49,3 +83,16 @@ uart-has-rtscts; status = "okay"; }; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; -- cgit v1.2.3 From 8a8c81aa605cec4a086bd46a9b9214b9671f8f42 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 25 May 2020 16:22:08 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Enable Ethernet AVB Enable Ethernet AVB on iWave RZ/G1H carrier board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590420129-7531-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index bb1deb09e41f..c57a5710574a 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -15,6 +15,7 @@ aliases { serial2 = &scifa2; serial4 = &scifb2; + ethernet0 = &avb; }; chosen { @@ -45,7 +46,27 @@ }; }; +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + &pfc { + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + scifa2_pins: scifa2 { groups = "scifa2_data_c"; function = "scifa2"; -- cgit v1.2.3 From 5a07fe33b8d4db72f825de90f8361a6a8680ba5f Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 25 May 2020 16:22:09 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Add RWDT support Enable RWDT and use 60 seconds as default timeout. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590420129-7531-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index c57a5710574a..f23c2ba65c92 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -90,6 +90,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scifa2 { pinctrl-0 = <&scifa2_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From 3816124fd0408ec98773409732035f8f8425ff50 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Tue, 26 May 2020 22:01:44 +0100 Subject: ARM: dts: r8a7742: Add audio support Add sound support for the RZ/G1H SoC (a.k.a. R8A7742). This work is based on similar work done on the R8A7744 SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Acked-by: Kuninori Morimoto Link: https://lore.kernel.org/r/1590526904-13855-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 284 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 284 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 3a9c67b2cc24..3ed05c6a1865 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -15,6 +15,27 @@ #address-cells = <2>; #size-cells = <2>; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -821,6 +842,269 @@ status = "disabled"; }; + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a7742", + "renesas,rcar_sound-gen2"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A7742_CLK_M2>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "ctu.0", "ctu.1", + "mix.0", "mix.1", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = ; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = ; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = ; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = ; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = ; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = ; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = ; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = ; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = ; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = ; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = ; + dmas = <&audma0 0x01>, <&audma1 0x02>, + <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi1: ssi-1 { + interrupts = ; + dmas = <&audma0 0x03>, <&audma1 0x04>, + <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi2: ssi-2 { + interrupts = ; + dmas = <&audma0 0x05>, <&audma1 0x06>, + <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi3: ssi-3 { + interrupts = ; + dmas = <&audma0 0x07>, <&audma1 0x08>, + <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi4: ssi-4 { + interrupts = ; + dmas = <&audma0 0x09>, <&audma1 0x0a>, + <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi5: ssi-5 { + interrupts = ; + dmas = <&audma0 0x0b>, <&audma1 0x0c>, + <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi6: ssi-6 { + interrupts = ; + dmas = <&audma0 0x0d>, <&audma1 0x0e>, + <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi7: ssi-7 { + interrupts = ; + dmas = <&audma0 0x0f>, <&audma1 0x10>, + <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi8: ssi-8 { + interrupts = ; + dmas = <&audma0 0x11>, <&audma1 0x12>, + <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + ssi9: ssi-9 { + interrupts = ; + dmas = <&audma0 0x13>, <&audma1 0x14>, + <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx", "rxu", "txu"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <13>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a7742", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <13>; + }; + xhci: usb@ee000000 { compatible = "renesas,xhci-r8a7742", "renesas,rcar-gen2-xhci"; -- cgit v1.2.3 From 436765010f266a2afd6c9afd15233225448a3e8d Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 27 May 2020 21:23:32 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Enable SGTL5000 audio codec This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590611013-26029-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 37 +++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index f23c2ba65c92..ff4fca9c35af 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -23,6 +23,20 @@ stdout-path = "serial2:115200n8"; }; + audio_clock: audio_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + + reg_1p5v: 1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; @@ -61,12 +75,35 @@ }; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + #sound-dai-cells = <0>; + reg = <0x0a>; + clocks = <&audio_clock>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p5v>; + }; +}; + &pfc { avb_pins: avb { groups = "avb_mdio", "avb_gmii"; function = "avb"; }; + i2c2_pins: i2c2 { + groups = "i2c2_b"; + function = "i2c2"; + }; + scifa2_pins: scifa2 { groups = "scifa2_data_c"; function = "scifa2"; -- cgit v1.2.3 From fc3a1b2763d44ed471169e1dff2c8ce0fb352c1c Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 27 May 2020 21:23:33 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7: Sound DMA support via DVC on DTS Enable sound with DMA support on carrier board. DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590611013-26029-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 63 +++++++++++++++++++++++++++++++++ 1 file changed, 63 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index ff4fca9c35af..e90aaf1c94f0 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -5,6 +5,29 @@ * Copyright (C) 2020 Renesas Electronics Corp. */ +/* + * SSI-SGTL5000 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + /dts-v1/; #include "r8a7742-iwg21m.dtsi" @@ -37,6 +60,21 @@ regulator-always-on; }; + rsnd_sgtl5000: sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; + }; + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; @@ -125,6 +163,27 @@ function = "sdhi2"; power-source = <1800>; }; + + sound_pins: sound { + groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rcar_sound,dai { + dai0 { + playback = <&ssi4 &src4 &dvc1>; + capture = <&ssi3 &src3 &dvc0>; + }; + }; }; &rwdt { @@ -159,3 +218,7 @@ sd-uhs-sdr50; status = "okay"; }; + +&ssi4 { + shared-pin; +}; -- cgit v1.2.3 From 937c9ebddc09284dc947afaae52c76d05ee1dcfd Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 27 May 2020 22:18:38 +0100 Subject: ARM: dts: r8a7742: Add thermal device to DT This patch instantiates the thermal sensor module with thermal-zone support. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590614320-30160-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 3ed05c6a1865..f57db0572b64 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -375,6 +375,17 @@ resets = <&cpg 407>; }; + thermal: thermal@e61f0000 { + compatible = "renesas,thermal-r8a7742", + "renesas,rcar-gen2-thermal"; + reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>; + interrupts = ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; + }; + icram0: sram@e63a0000 { compatible = "mmio-sram"; reg = <0 0xe63a0000 0 0x12000>; @@ -1359,6 +1370,25 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <95000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, -- cgit v1.2.3 From 5818cc37e7fc72d9f2da255d9648c5f2e1a33b22 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 27 May 2020 22:18:40 +0100 Subject: ARM: dts: r8a7742: Add CMT SoC specific support Add CMT[01] support to r8a7742 SoC DT. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1590614320-30160-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index f57db0572b64..08af9e2943cb 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -1368,6 +1368,38 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7742-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7742-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 329>; + status = "disabled"; + }; }; thermal-zones { -- cgit v1.2.3 From 91cebe35d1f5a335ef3de80027a34d9fd04a7ae9 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Sun, 7 Jun 2020 18:57:39 +0100 Subject: ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add device tree for camera DB Add support for the camera daughter board which is connected to iWave's RZ/G1H Qseven carrier board. Also enable ttySC[0135] and ethernet1 interfaces. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1591552659-21314-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 97 +++++++++++++++++++++++++ 2 files changed, 98 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6a1cac0bfc7..3bb6e310a674 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -927,6 +927,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \ r8a73a4-ape6evm.dtb \ r8a7740-armadillo800eva.dtb \ r8a7742-iwg21d-q7.dtb \ + r8a7742-iwg21d-q7-dbcm-ca.dtb \ r8a7743-iwg20d-q7.dtb \ r8a7743-iwg20d-q7-dbcm-ca.dtb \ r8a7743-sk-rzg1m.dtb \ diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts new file mode 100644 index 000000000000..1479ced50873 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the iWave-RZ/G1H Qseven board development + * platform with camera daughter board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a7742-iwg21d-q7.dts" + +/ { + model = "iWave Systems RZ/G1H Qseven development platform with camera add-on"; + compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742"; + + aliases { + serial0 = &scif0; + serial1 = &scif1; + serial3 = &scifb1; + serial5 = &hscif0; + ethernet1 = ðer; + }; +}; + +&avb { + /* Pins shared with VIN0, keep status disabled */ + status = "disabled"; +}; + +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + micrel,led-mode = <1>; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&pfc { + ether_pins: ether { + groups = "eth_mdio", "eth_rmii"; + function = "eth"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif1_pins: scif1 { + groups = "scif1_data"; + function = "scif1"; + }; + + scifb1_pins: scifb1 { + groups = "scifb1_data"; + function = "scifb1"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scifb1 { + pinctrl-0 = <&scifb1_pins>; + pinctrl-names = "default"; + status = "okay"; + + rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; +}; -- cgit v1.2.3 From fd88760b888bb58f3d1e76188ff056c78b717405 Mon Sep 17 00:00:00 2001 From: dillon min Date: Wed, 27 May 2020 15:27:25 +0800 Subject: ARM: dts: stm32: Add dma config for spi5 on stm32f429 Enable spi5's dma configuration for graphics data output to ilitek ili9341 panel via mipi dbi interface. Signed-off-by: dillon min Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 393f43c85a3c..e38b64f969ba 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -660,6 +660,9 @@ reg = <0x40015000 0x400>; interrupts = <85>; clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>; + dmas = <&dma2 3 2 0x400 0x0>, + <&dma2 4 2 0x400 0x0>; + dma-names = "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3 From 27e6b725b429e063ec4adeab45e19f2f0f2f514e Mon Sep 17 00:00:00 2001 From: dillon min Date: Wed, 27 May 2020 15:27:26 +0800 Subject: ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board This patch adds the pin configuration for ltdc and spi5 controller on stm32f429-disco board. Signed-off-by: dillon min Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32429i-eval.dts | 2 +- arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 69 +++++++++++++++++++++++++++++++++- 2 files changed, 69 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index c27fa355e5ab..c58c35ecc026 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -240,7 +240,7 @@ <dc { status = "okay"; - pinctrl-0 = <<dc_pins>; + pinctrl-0 = <<dc_pins_a>; pinctrl-names = "default"; port { diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 392fa143ce07..373ec8ddc280 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -282,7 +282,7 @@ }; }; - ltdc_pins: ltdc-0 { + ltdc_pins_a: ltdc-0 { pins { pinmux = , /* LCD_HSYNC */ , /* LCD_VSYNC */ @@ -316,6 +316,73 @@ }; }; + ltdc_pins_b: ltdc-1 { + pins { + pinmux = , + /* LCD_HSYNC */ + , + /* LCD_VSYNC */ + , + /* LCD_CLK */ + , + /* LCD_R2 */ + , + /* LCD_R3 */ + , + /* LCD_R4 */ + , + /* LCD_R5 */ + , + /* LCD_R6*/ + , + /* LCD_R7 */ + , + /* LCD_G2 */ + , + /* LCD_G3 */ + , + /* LCD_G4 */ + , + /* LCD_B2 */ + , + /* LCD_B3*/ + , + /* LCD_G5 */ + , + /* LCD_G6 */ + , + /* LCD_G7 */ + , + /* LCD_B4 */ + , + /* LCD_B5 */ + , + /* LCD_B6 */ + , + /* LCD_B7 */ + ; + /* LCD_DE */ + slew-rate = <2>; + }; + }; + + spi5_pins: spi5-0 { + pins1 { + pinmux = , + /* SPI5_CLK */ + ; + /* SPI5_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; + /* SPI5_MISO */ + bias-disable; + }; + }; + dcmi_pins: dcmi-0 { pins { pinmux = , /* DCMI_HSYNC */ -- cgit v1.2.3 From a726e2f000ec5643749e24145b3851da0850c927 Mon Sep 17 00:00:00 2001 From: dillon min Date: Wed, 27 May 2020 15:27:27 +0800 Subject: ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on stm32429-disco board Enable the ltdc & ili9341, gyro l3gd20 on stm32429-disco board. Signed-off-by: dillon min Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429-disco.dts | 48 +++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index 30c0f6717871..baed482a5d3a 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -49,6 +49,8 @@ #include "stm32f429.dtsi" #include "stm32f429-pinctrl.dtsi" #include +#include +#include / { model = "STMicroelectronics STM32F429i-DISCO board"; @@ -108,12 +110,58 @@ status = "okay"; }; +<dc { + status = "okay"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-names = "default"; + + port { + ltdc_out_rgb: endpoint { + remote-endpoint = <&panel_in_rgb>; + }; + }; +}; + &rtc { assigned-clocks = <&rcc 1 CLK_RTC>; assigned-clock-parents = <&rcc 1 CLK_LSI>; status = "okay"; }; +&spi5 { + status = "okay"; + pinctrl-0 = <&spi5_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>; + + l3gd20: l3gd20@0 { + compatible = "st,l3gd20-gyro"; + spi-max-frequency = <10000000>; + st,drdy-int-pin = <2>; + interrupt-parent = <&gpioa>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>, + <2 IRQ_TYPE_EDGE_RISING>; + reg = <0>; + status = "okay"; + }; + + display: display@1{ + /* Connect panel-ilitek-9341 to ltdc */ + compatible = "st,sf-tc240t-9370-t"; + reg = <1>; + spi-3wire; + spi-max-frequency = <10000000>; + dc-gpios = <&gpiod 13 0>; + port { + panel_in_rgb: endpoint { + remote-endpoint = <<dc_out_rgb>; + }; + }; + }; +}; + &usart1 { pinctrl-0 = <&usart1_pins_a>; pinctrl-names = "default"; -- cgit v1.2.3 From 4db36ed45b76a9bf75c3ca60e60ec607831a0f40 Mon Sep 17 00:00:00 2001 From: dillon min Date: Tue, 9 Jun 2020 21:26:40 +0800 Subject: ARM: dts: stm32: add I2C3 support on STM32F429 SoC This patch adds I2C3 instances of the STM32F429 SoC Signed-off-by: dillon min Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index e38b64f969ba..ecbff2732401 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -402,6 +402,18 @@ status = "disabled"; }; + i2c3: i2c@40005c00 { + compatible = "st,stm32f4-i2c"; + reg = <0x40005c00 0x400>; + interrupts = <72>, + <73>; + resets = <&rcc STM32F4_APB1_RESET(I2C3)>; + clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + dac: dac@40007400 { compatible = "st,stm32f4-dac-core"; reg = <0x40007400 0x400>; -- cgit v1.2.3 From 4409aeae98a297f30fc64a8dd1cd6f9ac8cbdb41 Mon Sep 17 00:00:00 2001 From: dillon min Date: Tue, 9 Jun 2020 21:26:41 +0800 Subject: ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4 This patch adds the pin configuration for I2C3 controller on stm32f4. Signed-off-by: dillon min Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 373ec8ddc280..35249a22e513 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -383,6 +383,18 @@ }; }; + i2c3_pins: i2c3-0 { + pins { + pinmux = , + /* I2C3_SDA */ + ; + /* I2C3_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <3>; + }; + }; + dcmi_pins: dcmi-0 { pins { pinmux = , /* DCMI_HSYNC */ -- cgit v1.2.3 From 1c9aa677623b9579b3d1a6339cc95ffe75a90e25 Mon Sep 17 00:00:00 2001 From: dillon min Date: Tue, 9 Jun 2020 21:26:42 +0800 Subject: ARM: dts: stm32: enable stmpe811 on stm32429-disco board Enable the stmpe811 touch screen on stm32429-disco board. Signed-off-by: dillon min Reviewed-by: Philippe Schenker Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429-disco.dts | 45 +++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index baed482a5d3a..f125d3022c91 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -110,6 +110,51 @@ status = "okay"; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + status = "okay"; + + stmpe811@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioa>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + + stmpe_adc { + compatible = "st,stmpe-adc"; + /* forbid to use ADC channels 3-0 (touch) */ + st,norequest-mask = <0x0F>; + }; + }; +}; + <dc { status = "okay"; pinctrl-0 = <<dc_pins_b>; -- cgit v1.2.3 From 70d4301e1a87ac84b725bb17b0aeef3b046262cb Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:21 +0200 Subject: ARM: dts: stm32: remove useless interrupt-names property on stm32f429 Driver doesn't use interrupt's name to get it so remove it from the node. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index ecbff2732401..39ecdaacac4d 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -322,7 +322,6 @@ assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; interrupts = <17 1>; - interrupt-names = "alarm"; st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; -- cgit v1.2.3 From 52107e8d6e576a26606516de43cd0d55dfda162e Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:22 +0200 Subject: ARM: dts: stm32: update pwm pinctrl node names for stm32f4 Rename pwm pinctrl nodes name to matching with yaml bindings requirements. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi index 35249a22e513..4774163af54b 100644 --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi @@ -257,7 +257,7 @@ }; }; - pwm1_pins: pwm-1 { + pwm1_pins: pwm1-0 { pins { pinmux = , /* TIM1_CH1 */ , /* TIM1_CH1N */ @@ -265,7 +265,7 @@ }; }; - pwm3_pins: pwm-3 { + pwm3_pins: pwm3-0 { pins { pinmux = , /* TIM3_CH1 */ ; /* TIM3_CH2 */ -- cgit v1.2.3 From 2a61f1168b54fffdd9e56a9f742c287fa2048b26 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:23 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f249-disco Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429-disco.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts index f125d3022c91..3dc068b91ca1 100644 --- a/arch/arm/boot/dts/stm32f429-disco.dts +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -72,10 +72,10 @@ leds { compatible = "gpio-leds"; - red { + led-red { gpios = <&gpiog 14 0>; }; - green { + led-green { gpios = <&gpiog 13 0>; linux,default-trigger = "heartbeat"; }; -- cgit v1.2.3 From f85b1b913766a44e06d1b52954329f2b57e8c17c Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:24 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f469-disco Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f469-disco.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts index 9397db0c43de..2e1b3bbbe4b5 100644 --- a/arch/arm/boot/dts/stm32f469-disco.dts +++ b/arch/arm/boot/dts/stm32f469-disco.dts @@ -89,17 +89,17 @@ leds { compatible = "gpio-leds"; - green { + led-green { gpios = <&gpiog 6 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - orange { + led-orange { gpios = <&gpiod 4 GPIO_ACTIVE_LOW>; }; - red { + led-red { gpios = <&gpiod 5 GPIO_ACTIVE_LOW>; }; - blue { + led-blue { gpios = <&gpiok 3 GPIO_ACTIVE_LOW>; }; }; -- cgit v1.2.3 From e83b9a4afe49ff8fcb91db24e56dff67816f22a2 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:25 +0200 Subject: ARM: dts: stm32: remove useless interrupt-names property on stm32f746 Driver doesn't use interrupt's name to get it so remove it from the node. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f746.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 93c063796780..5d69a0c653eb 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -304,7 +304,6 @@ assigned-clock-parents = <&rcc 1 CLK_LSE>; interrupt-parent = <&exti>; interrupts = <17 1>; - interrupt-names = "alarm"; st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; -- cgit v1.2.3 From 5f014cb81e04b2fe2ed94715d89822f25e6c498d Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:26 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f429-eval Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32429i-eval.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index c58c35ecc026..67e7648de41e 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -104,17 +104,17 @@ leds { compatible = "gpio-leds"; - green { + led-green { gpios = <&gpiog 6 1>; linux,default-trigger = "heartbeat"; }; - orange { + led-orange { gpios = <&gpiog 7 1>; }; - red { + led-red { gpios = <&gpiog 10 1>; }; - blue { + led-blue { gpios = <&gpiog 12 1>; }; }; -- cgit v1.2.3 From 7cf1acae2279ab1f5d9acf6d1304f0f3519a2beb Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:27 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f769-disco Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f769-disco.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts index 1626e00bb2cb..0ce7fbc20fa4 100644 --- a/arch/arm/boot/dts/stm32f769-disco.dts +++ b/arch/arm/boot/dts/stm32f769-disco.dts @@ -66,11 +66,11 @@ leds { compatible = "gpio-leds"; - green { + led-green { gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; - red { + led-red { gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>; }; }; -- cgit v1.2.3 From 2c11de97e00e87d5da4ac7a876380a311e94a298 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:28 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f746-eval Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32746g-eval.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index 4ea3f98dd275..ca8c192449ee 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -66,17 +66,17 @@ leds { compatible = "gpio-leds"; - green { + led-green { gpios = <&gpiof 10 1>; linux,default-trigger = "heartbeat"; }; - orange { + led-orange { gpios = <&stmfx_pinctrl 17 1>; }; - red { + led-red { gpios = <&gpiob 7 1>; }; - blue { + led-blue { gpios = <&stmfx_pinctrl 19 1>; }; }; -- cgit v1.2.3 From 2151761a9221ece341147e40c22807d20edb3c27 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:29 +0200 Subject: ARM: dts: stm32: remove useless interrupt-names property on stm32f743 Driver doesn't use interrupt's name to get it so remove it from the node. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32h743.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 9b7fc68380e9..d22295285113 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -487,7 +487,6 @@ assigned-clock-parents = <&rcc LSE_CK>; interrupt-parent = <&exti>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "alarm"; st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; -- cgit v1.2.3 From 96f8d30a7cb820d8704c71ef5941b872dd54e710 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:30 +0200 Subject: ARM: dts: stm32: Update nodes names for stm32h743 pinctrl Fix the nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi index e44e7baa3f17..fa5dcb6a5fdd 100644 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi @@ -163,7 +163,7 @@ #interrupt-cells = <2>; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins_a: i2c1-0 { pins { pinmux = , /* I2C1_SCL */ ; /* I2C1_SDA */ @@ -173,7 +173,7 @@ }; }; - ethernet_rmii: rmii@0 { + ethernet_rmii: rmii-0 { pins { pinmux = , , @@ -256,7 +256,7 @@ }; }; - usart1_pins: usart1@0 { + usart1_pins: usart1-0 { pins1 { pinmux = ; /* USART1_TX */ bias-disable; @@ -269,7 +269,7 @@ }; }; - usart2_pins: usart2@0 { + usart2_pins: usart2-0 { pins1 { pinmux = ; /* USART2_TX */ bias-disable; @@ -282,7 +282,7 @@ }; }; - usbotg_hs_pins_a: usbotg-hs@0 { + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = , /* ULPI_NXT */ , /* ULPI_DIR> */ -- cgit v1.2.3 From e810e2d880bf1fc076ae07817b8a30149f72cd10 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:32 +0200 Subject: ARM: dts: stm32: Add missing #address and #size cells on spi node for stm32mp151 Add the missing #address-cells and #size-cells to spi node. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 36f38a95b4de..3faaa2e23224 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1331,6 +1331,8 @@ dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; -- cgit v1.2.3 From ab349759cd5bc0a8b934b55840bc489f6838ac8f Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Wed, 13 May 2020 16:59:33 +0200 Subject: ARM: dts: stm32: update led nodes names for stm32f746-eval Update led nodes names to be aligned with yaml description Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 70db923a45f7..17a22fd7d8d1 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -62,7 +62,7 @@ led { compatible = "gpio-leds"; - blue { + led-blue { label = "heartbeat"; gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; -- cgit v1.2.3 From c7c4d698cd2882c4d095aeed43bbad6fc990e998 Mon Sep 17 00:00:00 2001 From: Tobias Schramm Date: Thu, 28 May 2020 19:25:50 +0200 Subject: arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts This commit adds cw2015 fuel gauge and battery to the Pinebook Pro dts. Signed-off-by: Tobias Schramm Link: https://lore.kernel.org/r/20200528172550.2324722-2-t.schramm@manjaro.org Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index cb0245d2226d..8f5b2df01560 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -28,6 +28,13 @@ pwms = <&pwm0 0 740740 0>; }; + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <9800000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3000000>; + }; + edp_panel: edp-panel { compatible = "boe,nv140fhmn49"; backlight = <&backlight>; @@ -741,6 +748,24 @@ }; }; }; + + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&bat>; + power-supplies = <&mains_charger>, <&fusb0>; + }; }; &i2s1 { -- cgit v1.2.3 From 251fe9a53354a55ffc4151f8176b443c6129c384 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 28 May 2020 09:38:51 +0200 Subject: ARM: dts: stm32: update uart4 pin configuration for low power on stm32mp157 Sleep pin configuration is refined for low power modes: - "sleep" (no wakeup & console suspend enabled): put pins in analog state to optimize power - "idle" (wakeup capability): keep Rx pin in alternate function Signed-off-by: Bich Hemon Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7eb858732d6d..7cf535dc05f5 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1648,6 +1648,23 @@ }; }; + uart4_idle_pins_a: uart4-idle-0 { + pins1 { + pinmux = ; /* UART4_TX */ + }; + pins2 { + pinmux = ; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_pins_a: uart4-sleep-0 { + pins { + pinmux = , /* UART4_TX */ + ; /* UART4_RX */ + }; + }; + uart4_pins_b: uart4-1 { pins1 { pinmux = ; /* UART4_TX */ -- cgit v1.2.3 From f3f2604ae9cbfa32d0f5629e5c61a4d79055e7e8 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 28 May 2020 09:38:52 +0200 Subject: ARM: dts: stm32: Update pin states for uart4 on stm32mp157c-ed1 Add sleep and idle states to uart4 pin configuration. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ed1.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 32ccd50b4144..ca109dc18238 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -353,8 +353,10 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; status = "okay"; }; -- cgit v1.2.3 From a5f8a58c6a2da588192392caea16d6988eb94d72 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 28 May 2020 09:38:53 +0200 Subject: ARM: dts: stm32: Update UART4 pin states on stm32mp15xx-dkx Add sleep and idle states to uart4 pin configuration. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 17a22fd7d8d1..dd5cef55d3ed 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -584,8 +584,10 @@ }; &uart4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; status = "okay"; }; -- cgit v1.2.3 From f6b43d89d3b5a31bf4251a26c61e92bf659e74c5 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 28 May 2020 09:40:02 +0200 Subject: ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl Fix usart and uart nodes ordering. Several usart nodes didn't respect expecting ordering. Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15") Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 122 +++++++++++++++---------------- 1 file changed, 61 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7cf535dc05f5..5ff1323236e1 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1574,67 +1574,6 @@ }; }; - usart2_pins_a: usart2-0 { - pins1 { - pinmux = , /* USART2_TX */ - ; /* USART2_RTS */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = , /* USART2_RX */ - ; /* USART2_CTS_NSS */ - bias-disable; - }; - }; - - usart2_sleep_pins_a: usart2-sleep-0 { - pins { - pinmux = , /* USART2_TX */ - , /* USART2_RTS */ - , /* USART2_RX */ - ; /* USART2_CTS_NSS */ - }; - }; - - usart2_pins_b: usart2-1 { - pins1 { - pinmux = , /* USART2_TX */ - ; /* USART2_RTS */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = , /* USART2_RX */ - ; /* USART2_CTS_NSS */ - bias-disable; - }; - }; - - usart2_sleep_pins_b: usart2-sleep-1 { - pins { - pinmux = , /* USART2_TX */ - , /* USART2_RTS */ - , /* USART2_RX */ - ; /* USART2_CTS_NSS */ - }; - }; - - usart3_pins_a: usart3-0 { - pins1 { - pinmux = ; /* USART3_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = ; /* USART3_RX */ - bias-disable; - }; - }; - uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ @@ -1732,6 +1671,67 @@ }; }; + usart2_pins_a: usart2-0 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_a: usart2-sleep-0 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + + usart2_pins_b: usart2-1 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + + usart3_pins_a: usart3-0 { + pins1 { + pinmux = ; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = ; /* OTG_ID */ -- cgit v1.2.3 From 391e437eedc0dab0a9f2c26997e68e040ae04ea3 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 28 May 2020 09:40:03 +0200 Subject: ARM: dts: stm32: fix uart7_pins_a comments in stm32mp15-pinctrl Fix uart7_pins_a comments to indicate UART7 pins instead of UART4 pins. Fixes: bf4b5f379fed ("ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157") Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 5ff1323236e1..fb98a66977fe 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1632,15 +1632,15 @@ uart7_pins_a: uart7-0 { pins1 { - pinmux = ; /* UART4_TX */ + pinmux = ; /* UART7_TX */ bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = , /* UART4_RX */ - , /* UART4_CTS */ - ; /* UART4_RTS */ + pinmux = , /* UART7_RX */ + , /* UART7_CTS */ + ; /* UART7_RTS */ bias-disable; }; }; -- cgit v1.2.3 From 43aad09c792894727d8f6914534f43df23079926 Mon Sep 17 00:00:00 2001 From: Diego Rondini Date: Mon, 15 Jun 2020 15:02:23 +0200 Subject: ARM: dts: orange-pi-zero-plus2: enable USB OTG port Enable support for USB OTG port on Orange Pi Zero Plus 2 (both H3 and H5 variants). As, according to the board schematics, the USB OTG port cannot provide power to external devices, we set dr_mode to peripheral. Signed-off-by: Diego Rondini Link: https://lore.kernel.org/r/20200615130223.34464-1-diego.rondini@kynetics.com Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 23 ++++++++++++++++++++++ .../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 23 ++++++++++++++++++++++ 2 files changed, 46 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index b8f46e2802fd..cbe32b975c5f 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -88,6 +88,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -132,8 +136,27 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; status = "okay"; }; + +&usb_otg { + /* + * According to schematics CN1 MicroUSB port can be used to take + * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB + * port cannot provide power externally even if the board is powered + * via GPIO pins. It thus makes sense to force peripheral mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index c95a68541309..e67733d133bb 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -48,6 +48,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -92,6 +96,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; @@ -103,3 +111,18 @@ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; + +&usb_otg { + /* + * According to schematics CN1 MicroUSB port can be used to take + * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB + * port cannot provide power externally even if the board is powered + * via GPIO pins. It thus makes sense to force peripheral mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3 From 21a827bf1c9a4ce67938251f3211e5c13eef51bc Mon Sep 17 00:00:00 2001 From: Diego Rondini Date: Mon, 15 Jun 2020 15:02:25 +0200 Subject: ARM: dts: orange-pi-zero-plus2: add leds configuration Add pwr and status leds configuration and turn on pwr led by default for Orange Pi Zero Plus 2 (both H3 and H5 variants). Signed-off-by: Diego Rondini Link: https://lore.kernel.org/r/20200615130223.34464-2-diego.rondini@kynetics.com Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 15 +++++++++++++++ .../boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 15 +++++++++++++++ 2 files changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts index cbe32b975c5f..251bbab7d707 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts @@ -70,6 +70,21 @@ }; }; + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index e67733d133bb..de19e68eb84e 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -30,6 +30,21 @@ }; }; + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; -- cgit v1.2.3 From 36cebead9f47104a4b434e0a852e46143a86ac52 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 20 Mar 2020 14:12:55 +0100 Subject: arm64: dts: imx8mq: enable Hantro G1/G2 VPU Add the i.MX8MQ VPU module which comprises Hantro G1 and G2 video decoder cores and a reset/control block. Hook up the bus clock to the VPU power domain to enable handshakes, and configure the core clocks to 600 MHz and the bus clock to 800 MHz by default. Signed-off-by: Philipp Zabel Reviewed-by: Ezequiel Garcia Tested-by: Ezequiel Garcia Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 978f8122c0d2..7f03c5a38b74 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -675,6 +675,7 @@ pgc_vpu: power-domain@6 { #power-domain-cells = <0>; reg = ; + clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; }; pgc_disp: power-domain@7 { @@ -1142,6 +1143,32 @@ status = "disabled"; }; + vpu: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu"; + reg = <0x38300000 0x10000>, + <0x38310000 0x10000>, + <0x38320000 0x10000>; + reg-names = "g1", "g2", "ctrl"; + interrupts = , + ; + interrupt-names = "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, <600000000>, + <800000000>, <0>; + power-domains = <&pgc_vpu>; + }; + pcie0: pcie@33800000 { compatible = "fsl,imx8mq-pcie"; reg = <0x33800000 0x400000>, -- cgit v1.2.3 From 75152d66315521a48c4997305f4e01c5f139e160 Mon Sep 17 00:00:00 2001 From: Peter Geis Date: Sun, 14 Jun 2020 14:29:51 +0000 Subject: arm64: dts: rockchip: set rockpro64 usbc dr_mode as host The usb-c port on the rockpro64 does not detect devices reliably when in otg mode. Setting the mode to "host" allows the port to work reliably. This aligns with the pinebook-pro configuration. Signed-off-by: Peter Geis Link: https://lore.kernel.org/r/20200614142950.1120694-1-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 6788ab28f89a..3456ee97c288 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -795,7 +795,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { -- cgit v1.2.3 From 2300e6dab473e93181cf76e4fe6671aa3d24c57b Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Sun, 7 Jun 2020 23:29:09 +0200 Subject: arm64: dts: rockchip: fix rk3368-lion gmac reset gpio The lion gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: d99a02bcfa81 ("arm64: dts: rockchip: add RK3368-uQ7 (Lion) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200607212909.920575-1-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index e17311e09082..216aafd90e7f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -156,7 +156,7 @@ pinctrl-0 = <&rgmii_pins>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; -- cgit v1.2.3 From 7a7184f6cfa9279f1a1c10a1845d247d7fad54ff Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Thu, 4 Jun 2020 11:12:39 +0200 Subject: arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio The puma vcc5v0_host regulator node currently uses opposite active-values for the enable pin. The gpio-declaration uses active-high while the separate enable-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the gmac fix. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200604091239.424318-1-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 07694b196fdb..063f59a420b6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -101,7 +101,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; -- cgit v1.2.3 From 8a445086f8af0b7b9bd8d1901d6f306bb154f70d Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 3 Jun 2020 15:28:36 +0200 Subject: arm64: dts: rockchip: fix rk3399-puma gmac reset gpio The puma gmac node currently uses opposite active-values for the gmac phy reset pin. The gpio-declaration uses active-high while the separate snps,reset-active-low property marks the pin as active low. While on the kernel side this works ok, other DT users may get confused - as seen with uboot right now. So bring this in line and make both properties match, similar to the other Rockchip board. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Heiko Stuebner Link: https://lore.kernel.org/r/20200603132836.362519-1-heiko@sntech.de --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 063f59a420b6..72c06abd27ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -157,7 +157,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; -- cgit v1.2.3 From 2bc65fef4fe424f5f8295175f1b42f8b94c6df01 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Sun, 24 May 2020 18:06:36 +0200 Subject: arm64: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio A test with the command below gives for example this error: arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: tsadc: tsadc-otp-gpio: {'phandle': [[90]], 'rockchip,pins': [[0, 6, 0, 123]]} is not of type 'array' 'gpio' is a sort of reserved nodename and should not be used for pinctrl in combination with 'rockchip,pins', so change nodes that end with 'gpio' to end with 'pin' or 'pins'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/ dtschema/schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200524160636.16547-2-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30.dtsi | 6 +- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 6 +- arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 24 +++---- .../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3368.dtsi | 6 +- arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 +- .../boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 4 +- arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts | 8 +-- arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts | 8 +-- .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 74 +++++++++++----------- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 8 +-- arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts | 8 +-- arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 4 +- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 8 +-- arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 4 +- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +- 20 files changed, 94 insertions(+), 94 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index a6b8427156d5..e9bb2b97ae55 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -733,9 +733,9 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <120000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-0 = <&tsadc_otp_pin>; pinctrl-1 = <&tsadc_otp_out>; - pinctrl-2 = <&tsadc_otp_gpio>; + pinctrl-2 = <&tsadc_otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; @@ -1373,7 +1373,7 @@ }; tsadc { - tsadc_otp_gpio: tsadc-otp-gpio { + tsadc_otp_pin: tsadc-otp-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index ac7f694079d0..ba1c71568164 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -1629,7 +1629,7 @@ }; tsadc { - tsadc_otp_gpio: tsadc-otp-gpio { + tsadc_otp_pin: tsadc-otp-pin { rockchip,pins = <0 RK_PB2 0 &pcfg_pull_none>; }; @@ -1657,7 +1657,7 @@ <2 RK_PA3 1 &pcfg_pull_none>; }; - uart0_rts_gpio: uart0-rts-gpio { + uart0_rts_pin: uart0-rts-pin { rockchip,pins = <2 RK_PA3 0 &pcfg_pull_none>; }; @@ -1730,7 +1730,7 @@ <4 RK_PA7 1 &pcfg_pull_none>; }; - uart4_rts_gpio: uart4-rts-gpio { + uart4_rts_pin: uart4-rts-pin { rockchip,pins = <4 RK_PA7 0 &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index ac29c2744d08..1969dab84138 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -41,7 +41,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 34db48c274e5..b70ffb1c6a63 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -34,7 +34,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 6e09c223ed57..86cfb5c50a94 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -25,7 +25,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index d399883d4b75..72e655020560 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -552,9 +552,9 @@ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; rockchip,grf = <&grf>; @@ -1154,7 +1154,7 @@ rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>, <0 RK_PA6 2 &pcfg_pull_none>; }; - i2c3_gpio: i2c3-gpio { + i2c3_pins: i2c3-pins { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>, <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1225,7 +1225,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -1248,7 +1248,7 @@ rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>; }; - uart0_rts_gpio: uart0-rts-gpio { + uart0_rts_pin: uart0-rts-pin { rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1267,7 +1267,7 @@ rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>; }; - uart1_rts_gpio: uart1-rts-gpio { + uart1_rts_pin: uart1-rts-pin { rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1493,7 +1493,7 @@ rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>; }; - sdmmc0m0_gpio: sdmmc0m0-gpio { + sdmmc0m0_pin: sdmmc0m0-pin { rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; }; }; @@ -1503,7 +1503,7 @@ rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>; }; - sdmmc0m1_gpio: sdmmc0m1-gpio { + sdmmc0m1_pin: sdmmc0m1-pin { rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>; }; }; @@ -1536,7 +1536,7 @@ <1 RK_PA3 1 &pcfg_pull_up_8ma>; }; - sdmmc0_gpio: sdmmc0-gpio { + sdmmc0_pins: sdmmc0-pins { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1578,7 +1578,7 @@ <3 RK_PA7 3 &pcfg_pull_up_4ma>; }; - sdmmc0ext_gpio: sdmmc0ext-gpio { + sdmmc0ext_pins: sdmmc0ext-pins { rockchip,pins = <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1623,7 +1623,7 @@ <1 RK_PC1 1 &pcfg_pull_up_8ma>; }; - sdmmc1_gpio: sdmmc1-gpio { + sdmmc1_pins: sdmmc1-pins { rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1817,7 +1817,7 @@ tsadc_int: tsadc-int { rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>; }; - tsadc_gpio: tsadc-gpio { + tsadc_pin: tsadc-pin { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index cbde279ae81d..dbd2caba322f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -125,7 +125,7 @@ }; sdmmc { - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 1ebb0eef42da..5d25a9d04051 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -483,9 +483,9 @@ resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; @@ -1145,7 +1145,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 20b5599f5e78..6db18808b9c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -589,11 +589,11 @@ }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 4373ed732af7..60cd1c18cd4e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -499,7 +499,7 @@ camera: &i2c7 { }; /* there is no external pull up, so need to set this pin pull up */ -&sdmmc_cd_gpio { +&sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 2f3997740068..32dcaf210085 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -516,7 +516,7 @@ ap_i2c_audio: &i2c8 { * configured as SDMMC and not JTAG. */ pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin &sdmmc_bus4>; bus-width = <4>; @@ -767,7 +767,7 @@ ap_i2c_audio: &i2c8 { }; /* This is where we actually hook up CD; has external pull */ - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index bf87fa32d3b1..341d074ed996 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -205,7 +205,7 @@ compatible = "silergy,syr827"; reg = <0x40>; regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -223,7 +223,7 @@ compatible = "silergy,syr828"; reg = <0x41>; regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -521,12 +521,12 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index 73be38a53796..1fa80ac15464 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -341,7 +341,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -360,7 +360,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -447,11 +447,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts index 8f5b2df01560..06d48338c836 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts @@ -40,7 +40,7 @@ backlight = <&backlight>; enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&panel_en_gpio>; + pinctrl-0 = <&panel_en_pin>; power-supply = <&vcc3v3_panel>; ports { @@ -67,7 +67,7 @@ gpio-key-lid { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&lidbtn_gpio>; + pinctrl-0 = <&lidbtn_pin>; lid { debounce-interval = <20>; @@ -83,7 +83,7 @@ gpio-key-power { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn_gpio>; + pinctrl-0 = <&pwrbtn_pin>; power { debounce-interval = <20>; @@ -124,7 +124,7 @@ clocks = <&rk808 1>; clock-names = "ext_clock"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h_gpio>; + pinctrl-0 = <&wifi_enable_h_pin>; post-power-on-delay-ms = <100>; power-off-delay-us = <500000>; @@ -136,7 +136,7 @@ es8316-sound { compatible = "simple-audio-card"; pinctrl-names = "default"; - pinctrl-0 = <&hp_det_gpio>; + pinctrl-0 = <&hp_det_pin>; simple-audio-card,name = "rockchip,es8316-codec"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; @@ -220,7 +220,7 @@ enable-active-high; gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pwr_5v_gpio>; + pinctrl-0 = <&pwr_5v_pin>; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -277,7 +277,7 @@ enable-active-high; gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h_gpio>; + pinctrl-0 = <&sdmmc0_pwr_h_pin>; regulator-name = "vcc3v0_sd"; regulator-always-on; regulator-min-microvolt = <3000000>; @@ -295,7 +295,7 @@ enable-active-high; gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&lcdvcc_en_gpio>; + pinctrl-0 = <&lcdvcc_en_pin>; regulator-name = "vcc3v3_panel"; regulator-always-on; regulator-min-microvolt = <3300000>; @@ -324,7 +324,7 @@ enable-active-high; gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en_gpio>; + pinctrl-0 = <&vcc5v0_host_en_pin>; regulator-name = "vcc5v0_otg"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -343,7 +343,7 @@ enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en_gpio>; + pinctrl-0 = <&vcc5v0_typec0_en_pin>; regulator-name = "vbus_5vout"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -375,7 +375,7 @@ /* Also triggered by USB charger */ pinctrl-names = "default"; - pinctrl-0 = <&dc_det_gpio>; + pinctrl-0 = <&dc_det_pin>; }; }; @@ -454,7 +454,7 @@ interrupt-parent = <&gpio3>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l_gpio>; + pinctrl-0 = <&pmic_int_l_pin>; rockchip,system-power-controller; wakeup-source; @@ -634,7 +634,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-always-on; regulator-boot-on; @@ -653,7 +653,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-always-on; regulator-boot-on; @@ -700,7 +700,7 @@ interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int_gpio>; + pinctrl-0 = <&fusb0_int_pin>; vbus-supply = <&vbus_typec>; connector { @@ -770,7 +770,7 @@ &i2s1 { pinctrl-names = "default"; - pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; + pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; rockchip,capture-channels = <8>; rockchip,playback-channels = <8>; status = "okay"; @@ -802,49 +802,49 @@ &pinctrl { buttons { - pwrbtn_gpio: pwrbtn-gpio { + pwrbtn_pin: pwrbtn-pin { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; - lidbtn_gpio: lidbtn-gpio { + lidbtn_pin: lidbtn-pin { rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dc-charger { - dc_det_gpio: dc-det-gpio { + dc_det_pin: dc-det-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; es8316 { - hp_det_gpio: hp-det-gpio { + hp_det_pin: hp-det-pin { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; fusb302x { - fusb0_int_gpio: fusb0-int-gpio { + fusb0_int_pin: fusb0-int-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; i2s1 { - i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { + i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; }; }; lcd-panel { - lcdvcc_en_gpio: lcdvcc-en-gpio { + lcdvcc_en_pin: lcdvcc-en-pin { rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; - panel_en_gpio: panel-en-gpio { + panel_en_pin: panel-en-pin { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; - lcd_panel_reset_gpio: lcd-panel-reset-gpio { + lcd_panel_reset_pin: lcd-panel-reset-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -860,58 +860,58 @@ }; pmic { - pmic_int_l_gpio: pmic-int-l-gpio { + pmic_int_l_pin: pmic-int-l-pin { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sdcard { - sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { + sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { - wifi_enable_h_gpio: wifi-enable-h-gpio { + wifi_enable_h_pin: wifi-enable-h-pin { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { - vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { + vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { - pwr_5v_gpio: pwr-5v-gpio { + pwr_5v_pin: pwr-5v-pin { rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { + vcc5v0_host_en_pin: vcc5v0-host-en-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-bluetooth { - bt_wake_gpio: bt-wake-gpio { + bt_wake_pin: bt-wake-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_host_wake_gpio: bt-host-wake-gpio { + bt_host_wake_pin: bt-host-wake-pin { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_reset_gpio: bt-reset-gpio { + bt_reset_pin: bt-reset-pin { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1059,7 +1059,7 @@ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; max-speed = <1500000>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; + pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; vbat-supply = <&wifi_bat>; vddio-supply = <&vcc_wl>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 9f225e9c3d54..59b89d6ccdef 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -456,7 +456,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -475,7 +475,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -609,11 +609,11 @@ }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 3923ec01ef66..60f98a3e19d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -390,7 +390,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -409,7 +409,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -532,11 +532,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index ba7c75c9f2a1..5e3ac589bc54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -470,12 +470,12 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 3456ee97c288..c84cad16118a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -445,7 +445,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -464,7 +464,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -612,11 +612,11 @@ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 1bc1579674e5..701a567d7638 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -481,11 +481,11 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 2581e9cc7a1d..781b5c2cdb4d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -845,9 +845,9 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; @@ -2485,7 +2485,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; -- cgit v1.2.3 From 6dd5e12c0b9bba40b3947ac1a9fd2f992585b5c6 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Fri, 22 May 2020 17:46:57 +0200 Subject: arm64: dts: rockchip: rename and label gpio-led subnodes part 2 Current dts files with 'gpio-led' nodes were manually verified. In order to automate this process leds-gpio.txt has been converted to yaml. With this conversion a check for pattern properties was added. In part 2 rename and label gpio-led subnodes that passed the regex, but still don't have the preferred form. Any pin subnode that ends with '-gpio' in the pinctrl node generates a warning. Fix with help of the following rules: 1: Add nodename in the preferred form. 2: Always add a label that ends with '_led' to prevent conflicts with other labels such as 'power' and 'mmc' 3: If leds need pinctrl add a label that ends with '_led_pin' also to prevent conflicts with other labels. patternProperties: # The first form is preferred, but fall back to just 'led' # anywhere in the node name to at least catch some child nodes. "(^led-[0-9a-f]$|led)": make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/ leds-gpio.yaml make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/ schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200522154657.9472-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 6 +++--- arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi | 8 ++++---- arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 10 +++++----- arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 14 +++++++------- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 10 +++++----- 8 files changed, 33 insertions(+), 33 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index dbd2caba322f..7fcb1eacea8a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -25,9 +25,9 @@ }; leds { - pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>; + pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; - sd-card-led { + sd_card_led: led-3 { label = "sd_card_led"; gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; @@ -118,7 +118,7 @@ }; leds { - led_sd_haikou: led-sd-gpio { + sd_card_led_pin: sd-card-led-pin { rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 216aafd90e7f..24d28be4736c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -76,16 +76,16 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_module>; + pinctrl-0 = <&module_led_pins>; - module_led1 { + module_led1: led-1 { label = "module_led1"; gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; panic-indicator; }; - module_led2 { + module_led2: led-2 { label = "module_led2"; gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -270,7 +270,7 @@ &pinctrl { leds { - led_pins_module: led-module-gpio { + module_led_pins: module-led-pins { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index e87a04477440..e36837c04dc7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -141,15 +141,15 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + pinctrl-0 = <&sys_led_pin>, <&user_led_pin>; - sys-led { + sys_led: led-0 { label = "sys_led"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; }; - user-led { + user_led: led-1 { label = "user_led"; default-state = "off"; gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; @@ -586,11 +586,11 @@ }; leds { - sys_led_gpio: sys_led-gpio { + sys_led_pin: sys-led-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led_gpio: user_led-gpio { + user_led_pin: user-led-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 1d246c2caa3c..76a8b40a93c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -117,9 +117,9 @@ leds: gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_gpio>; + pinctrl-0 = <&status_led_pin>; - status { + status_led: led-0 { gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; label = "status_led"; linux,default-trigger = "heartbeat"; @@ -520,7 +520,7 @@ }; gpio-leds { - leds_gpio: leds-gpio { + status_led_pin: status-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index d80d6b726820..a8d363568fd6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -15,9 +15,9 @@ }; leds { - pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>; + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - sd-card-led { + sd_card_led: led-1 { label = "sd_card_led"; gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; @@ -179,7 +179,7 @@ }; leds { - led_sd_haikou: led-sd-gpio { + sd_card_led_pin: sd-card-led-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 72c06abd27ea..4660416c8f38 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -11,9 +11,9 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_module>; + pinctrl-0 = <&module_led_pin>; - module-led { + module_led: led-0 { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -450,7 +450,7 @@ }; leds { - led_pin_module: led-module-gpio { + module_led_pin: module-led-pin { rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 59b89d6ccdef..b85ec31cd283 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -61,23 +61,23 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; - work-led { + work_led: led-0 { label = "green:work"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - diy-led { + diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc1"; }; - yellow-led { + yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -595,15 +595,15 @@ }; leds { - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - yellow_led_gpio: yellow_led-gpio { + yellow_led_pin: yellow-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index c84cad16118a..6e553ff47534 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -39,15 +39,15 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - work-led { + work_led: led-0 { label = "work"; default-state = "on"; gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; }; - diy-led { + diy_led: led-1 { label = "diy"; default-state = "off"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; @@ -588,11 +588,11 @@ }; leds { - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; -- cgit v1.2.3 From fff987e7328951f7d6fb2d0545de8635ceafa89f Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Sun, 24 May 2020 18:06:35 +0200 Subject: ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio A test with the command below gives for example this error: arch/arm/boot/dts/rk3288-tinker.dt.yaml: tsadc: otp-gpio: {'phandle': [[54]], 'rockchip,pins': [[0, 10, 0, 118]]} is not of type 'array' 'gpio' is a sort of reserved nodename and should not be used for pinctrl in combination with 'rockchip,pins', so change nodes that end with 'gpio' to end with 'pin' or 'pins'. make ARCH=arm dtbs_check DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/ dtschema/schemas/gpio/gpio.yaml Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200524160636.16547-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk322x.dtsi | 6 +++--- arch/arm/boot/dts/rk3288-veyron-jaq.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-jerry.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-mighty.dts | 6 +++--- arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 +- arch/arm/boot/dts/rk3288-veyron-pinky.dts | 6 +++--- arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi | 2 +- arch/arm/boot/dts/rk3288-veyron-speedy.dts | 2 +- arch/arm/boot/dts/rk3288.dtsi | 6 +++--- arch/arm/boot/dts/rv1108.dtsi | 12 ++++++------ 10 files changed, 23 insertions(+), 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index b0fd92befdeb..3236abb0aba9 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -520,9 +520,9 @@ resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <0>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; @@ -1111,7 +1111,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 171ba6185b6d..8efba9deae3c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -47,7 +47,7 @@ &sdmmc { disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin &sdmmc_bus4>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 66f00d28801a..2c916c50dda5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -192,7 +192,7 @@ &sdmmc { disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin &sdmmc_bus4>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts index 27fbc07476d2..fa695a88f236 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mighty.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts @@ -18,8 +18,8 @@ }; &sdmmc { - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio - &sdmmc_wp_gpio &sdmmc_bus4>; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin + &sdmmc_wp_pin &sdmmc_bus4>; wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; /delete-property/ disable-wp; @@ -27,7 +27,7 @@ &pinctrl { sdmmc { - sdmmc_wp_gpio: sdmmc-wp-gpio { + sdmmc_wp_pin: sdmmc-wp-pin { rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 383fad1a88a1..f8b69e0a16a0 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -114,7 +114,7 @@ &sdmmc { disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin &sdmmc_bus4>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 71e6629cc208..4e9fdb0f722d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -105,7 +105,7 @@ }; sdmmc { - sdmmc_wp_gpio: sdmmc-wp-gpio { + sdmmc_wp_pin: sdmmc-wp-pin { rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -126,8 +126,8 @@ &sdmmc { pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio - &sdmmc_wp_gpio &sdmmc_bus4>; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin + &sdmmc_wp_pin &sdmmc_bus4>; wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index fe950f9863e8..27fb06ce907e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -41,7 +41,7 @@ }; /* This is where we actually hook up CD */ - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index e354c61a45e7..4a3ea934d03e 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -54,7 +54,7 @@ &sdmmc { disable-wp; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin &sdmmc_bus4>; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 2e1edd85f04a..84d59469035e 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -574,9 +574,9 @@ resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; @@ -1929,7 +1929,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index f9cfe2c80791..a5d130bd0547 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -351,9 +351,9 @@ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; rockchip,hw-tshut-temp = <120000>; @@ -728,7 +728,7 @@ <0 RK_PC6 3 &pcfg_pull_none>; }; - i2c2m1_gpio: i2c2m1-gpio { + i2c2m1_pins: i2c2m1-pins { rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -740,7 +740,7 @@ <1 RK_PD4 2 &pcfg_pull_none>; }; - i2c2m05v_gpio: i2c2m05v-gpio { + i2c2m05v_pins: i2c2m05v-pins { rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -867,7 +867,7 @@ rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; }; - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -886,7 +886,7 @@ rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>; }; - uart0_rts_gpio: uart0-rts-gpio { + uart0_rts_pin: uart0-rts-pin { rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; -- cgit v1.2.3 From 6c2b99a2e7a073575b4ee91abf7d16470991c1f4 Mon Sep 17 00:00:00 2001 From: Abhishek Pandit-Subedi Date: Fri, 12 Jun 2020 13:02:48 -0700 Subject: ARM: dts: rockchip: Add marvell BT irq config Veyron Jaq and Mighty both use the Marvel 8897 WiFi+BT chip. Add wakeup and pinctrl block to devicetree so the btmrvl driver can correctly configure the wakeup interrupt. Signed-off-by: Abhishek Pandit-Subedi Reviewed-by: Douglas Anderson Link: https://lore.kernel.org/r/20200612130219.v2.1.I66864be898aa835ccb66b6cd5220d0b082338a81@changeid Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron-jaq.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 8efba9deae3c..af77ab20586d 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -44,6 +44,21 @@ }; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = ; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; +}; + &sdmmc { disable-wp; pinctrl-names = "default"; -- cgit v1.2.3 From 07e324d4dfef7b9df22c950055636b9d0b890af4 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Mon, 15 Jun 2020 12:55:23 +0300 Subject: ARM: dts: at91: sama5d2_xplained: classd: pull-down the R1 and R3 lines The R1 and R3 lines drive NMOS transistors that are OFF with a low level. On the SAMA5D2 Xplained board, if the pins corresponding to R1 and R3 have pull-ups enabled, there is an extra 2 x 30uA power consumption. Use pull-downs for these 2 lines to remove the unnecessary power consumption. Fixes: b133ca7a653c ("ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd") Signed-off-by: Codrin Ciubotariu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200615095525.43414-1-codrin.ciubotariu@microchip.com --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index a927165ea7c2..0e17df568d0b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -490,14 +490,18 @@ bias-pull-up; }; - pinctrl_classd_default: classd_default { + pinctrl_classd_default_pfets: classd_default_pfets { pinmux = , - , - , - ; + ; bias-pull-up; }; + pinctrl_classd_default_nfets: classd_default_nfets { + pinmux = , + ; + bias-pull-down; + }; + pinctrl_flx0_default: flx0_default { pinmux = , ; @@ -696,7 +700,7 @@ classd: classd@fc048000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_classd_default>; + pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>; atmel,pwm-type = "diff"; atmel,non-overlap-time = <10>; status = "okay"; -- cgit v1.2.3 From 008e6fad765e684dc5c828693b7d8014524ec08b Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Mon, 15 Jun 2020 12:55:24 +0300 Subject: ARM: dts: at91: sam9x60ek: classd: pull-down the L1 and L3 lines The L1 and L3 lines drive NMOS transistors that are OFF with a low level. On the SAM9X60 EK board, if the pins corresponding to L1 and L3 have pull-ups enabled, there is an extra 2 x 30uA power consumption. Use pull-downs for these 2 lines to remove the unnecessary power consumption. Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Signed-off-by: Codrin Ciubotariu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200615095525.43414-2-codrin.ciubotariu@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index a5f5718c711a..8652dbbae5be 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -470,9 +470,9 @@ pinctrl_classd_default: classd { atmel,pins = ; + AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>; }; }; -- cgit v1.2.3 From e9a8d99639c9eda1f95f6d48b9dc0c24e8d29360 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 20 May 2020 10:02:43 +0800 Subject: arm64: dts: imx8mq: Add mmc aliases Add mmc aliases for kernel usage Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 7f03c5a38b74..aefc7ddd479b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -29,6 +29,8 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; -- cgit v1.2.3 From 614d88460f28cc0e73268ab89c770a909d7004a5 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 20 May 2020 10:02:44 +0800 Subject: arm64: dts: imx8mq: Add ethernet alias Add ethernet alias, so bootloader code can use this to find the primary ethernet device, and set the MAC address. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index aefc7ddd479b..54bed643ed5b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -20,6 +20,7 @@ #size-cells = <2>; aliases { + ethernet0 = &fec1; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; -- cgit v1.2.3 From 83ae2848520a91fcb9933e1dbb4d1333f44ee473 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 20 May 2020 10:02:45 +0800 Subject: arm64: dts: imx8mm: sort the aliases Sort the aliases alphabetically. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index aaf6e71101a1..c6bf8ba811cc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -18,10 +18,18 @@ aliases { ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -29,14 +37,6 @@ spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; }; cpus { -- cgit v1.2.3 From ac4af2b12bbebd5d088726443e2cccac54e29c4f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 20 May 2020 10:02:46 +0800 Subject: arm64: dts: imx8mp: add i2c aliases The devices could be enumerated properly with aliases. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 45e2c0a4e889..c81cb0094f5e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -23,6 +23,12 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + i2c5 = &i2c6; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; -- cgit v1.2.3 From 3269c178b7a11dd8629200f594adce44639fd651 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Mon, 25 May 2020 15:38:27 +0800 Subject: arm64: dts: ls1028a: add one more thermal zone support There are 2 thermal zones in ls1028a soc. Current dts only includes one. This patch adds the other thermal zone node in dts to enable it. Signed-off-by: Yuantian Tang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 055f114cf848..bc6f0c0f85da 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -129,11 +129,31 @@ }; thermal-zones { - core-cluster { + ddr-controller { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + trips { core_cluster_alert: core-cluster-alert { temperature = <85000>; -- cgit v1.2.3 From fe3dfc25c11de5a4f201d05f475863684aadfdd2 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sat, 23 May 2020 09:12:13 -0400 Subject: arm64: dts: qcom: sm8250: use dt-bindings defines for clocks Use the dt-bindings defines for qupv3_id_1 node's clocks. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200523131213.18653-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 7050adba7995..7574ff5f84db 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -290,7 +290,8 @@ compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc 133>, <&gcc 134>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -300,7 +301,7 @@ compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc 113>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = ; status = "disabled"; }; -- cgit v1.2.3 From bccc7dd2334dd2f5823987a7172f0f34d3cf1a4e Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sat, 23 May 2020 09:21:04 -0400 Subject: arm64: dts: qcom: sm8250: rename spmi node to spmi_bus The pm8150 dtsi files refer to it as spmi_bus, so change it. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200523132104.31046-1-jonathan@marek.ca [bjorn: Dropped qcom, from node name while we're poking at it] Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 7574ff5f84db..8d7e89e51b60 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -396,7 +396,7 @@ interrupt-controller; }; - spmi: qcom,spmi@c440000 { + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, <0x0 0x0c600000 0x0 0x2000000>, -- cgit v1.2.3 From b9ec8cbcc291f80bc1c15e87b14f45a9c0a877fb Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sat, 23 May 2020 09:22:22 -0400 Subject: arm64: dts: qcom: sm8250: sort nodes by physical address Other dts have nodes sorted by physical address, be consistent with that. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200523132223.31108-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 143 +++++++++++++++++------------------ 1 file changed, 71 insertions(+), 72 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8d7e89e51b60..d53878f50e30 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -377,13 +377,9 @@ }; }; - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ - interrupts = ; + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x0 0x01f40000 0x0 0x40000>; }; pdc: interrupt-controller@b220000 { @@ -414,6 +410,74 @@ #interrupt-cells = <4>; }; + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + apps_rsc: rsc@18200000 { label = "apps_rsc"; compatible = "qcom,rpmh-rsc"; @@ -486,71 +550,6 @@ }; }; }; - - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x0 0x01f40000 0x0 0x40000>; - }; - - timer@17c20000 { - #address-cells = <2>; - #size-cells = <2>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x0 0x17c20000 0x0 0x1000>; - clock-frequency = <19200000>; - - frame@17c21000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x0 0x17c21000 0x0 0x1000>, - <0x0 0x17c22000 0x0 0x1000>; - }; - - frame@17c23000 { - frame-number = <1>; - interrupts = ; - reg = <0x0 0x17c23000 0x0 0x1000>; - status = "disabled"; - }; - - frame@17c25000 { - frame-number = <2>; - interrupts = ; - reg = <0x0 0x17c25000 0x0 0x1000>; - status = "disabled"; - }; - - frame@17c27000 { - frame-number = <3>; - interrupts = ; - reg = <0x0 0x17c27000 0x0 0x1000>; - status = "disabled"; - }; - - frame@17c29000 { - frame-number = <4>; - interrupts = ; - reg = <0x0 0x17c29000 0x0 0x1000>; - status = "disabled"; - }; - - frame@17c2b000 { - frame-number = <5>; - interrupts = ; - reg = <0x0 0x17c2b000 0x0 0x1000>; - status = "disabled"; - }; - - frame@17c2d000 { - frame-number = <6>; - interrupts = ; - reg = <0x0 0x17c2d000 0x0 0x1000>; - status = "disabled"; - }; - }; - }; timer { -- cgit v1.2.3 From 6b9afd8f96c6eba561dabbe4e15052b9ceb6878a Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sat, 23 May 2020 13:52:32 -0400 Subject: arm64: dts: qcom: sm8250: change ufs node name to ufshc The ufs-qcom driver checks that the name matches the androidboot.bootdevice parameter provided by the bootloader, which uses the name ufshc. Without this change UFS fails to probe. I think this is broken behavior from the ufs-qcom driver, but using the name ufshc is consistent with dts for sdm845/sm8150/etc. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200523175232.13721-1-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index d53878f50e30..5a14790bb0cd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -307,7 +307,7 @@ }; }; - ufs_mem_hc: ufs@1d84000 { + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; -- cgit v1.2.3 From 39cfcf61008d20e7dc98f99174039b8996f712ae Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 20 May 2020 18:03:37 -0700 Subject: arm64: dts: qcom: sc7180: Move mss node to the right place The modem node has an address of 4080000 and thus should come after tlmm and before gpu. Move the node to the right place to maintainer proper address sort order. Reviewed-by: Sibi Sankar Reviewed-by: Evan Green Cc: Evan Green Cc: Sibi Sankar Fixes: e14a15eba89a ("arm64: dts: qcom: sc7180: Add Q6V5 MSS node") Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20200521010337.229177-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++------------------ 1 file changed, 51 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 31b9217bb5bf..5b022bc5623d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1459,6 +1459,57 @@ }; }; + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7180-mpss-pas"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", + "mnoc_axi", "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, + <&rpmhpd SC7180_CX>, + <&rpmhpd SC7180_MX>, + <&rpmhpd SC7180_MSS>; + power-domain-names = "load_state", "cx", "mx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,spare-regs = <&tcsr_regs 0xb3e4>; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + gpu: gpu@5000000 { compatible = "qcom,adreno-618.0", "qcom,adreno"; #stream-id-cells = <16>; @@ -2054,57 +2105,6 @@ }; }; - remoteproc_mpss: remoteproc@4080000 { - compatible = "qcom,sc7180-mpss-pas"; - reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "nav", "snoc_axi", - "mnoc_axi", "xo"; - - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, - <&rpmhpd SC7180_MX>, - <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; - - memory-region = <&mpss_mem>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - qcom,spare-regs = <&tcsr_regs 0xb3e4>; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "modem"; - qcom,remote-pid = <1>; - mboxes = <&apss_shared 12>; - }; - }; - sdhc_2: sdhci@8804000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; -- cgit v1.2.3 From 41bb1aad5199257bf7684d40656228d66920c331 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 28 May 2020 07:48:14 -0700 Subject: arm64: dts: qcom: msm8998-mtp: Fix label on l15 regulator The label on the l15 regulator node does not follow the style of the rest of the regulator nodes. Luckily, no one has used the label yet, so lets fix it. Fixes: 31c1f0e33deb ("arm64: dts: qcom: msm8998: Add RPM and regulators for MTP") Signed-off-by: Jeffrey Hugo Link: https://lore.kernel.org/r/20200528144814.44143-1-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 8a14b2bf7bca..cec42437b302 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -235,7 +235,7 @@ regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; - vreg_15a_1p8: l15 { + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; -- cgit v1.2.3 From 5c29f9e6e7d42e113bd51aeb92a28bf1ae76911c Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 28 May 2020 07:51:35 -0700 Subject: arm64: dts: qcom: msm8998-clamshell: Fix label on l15 regulator The label on the l15 regulator node does not follow the style of the rest of the regulator nodes. Luckily, no one has used the label yet, so lets fix it. Fixes: 2c6d2d3a580a ("arm64: dts: qcom: Add Lenovo Miix 630") Signed-off-by: Jeffrey Hugo Link: https://lore.kernel.org/r/20200528145135.44269-1-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 6ab830d01867..00d84fb21798 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -202,7 +202,7 @@ regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; - vreg_15a_1p8: l15 { + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; -- cgit v1.2.3 From 5f7f61e34d17b11865f55ae06b17d9ed10bd4332 Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Thu, 28 May 2020 11:53:41 -0700 Subject: arm64: dts: qcom: lenovo630: Add Modem firmware files By specifying the modem firmware files, we can boot the modem subsystem which also gives us wifi. Signed-off-by: Jeffrey Hugo Link: https://lore.kernel.org/r/20200528185341.4891-1-jeffrey.l.hugo@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts index 407c6a32911c..89492ed5196c 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -25,6 +25,11 @@ }; }; +&remoteproc_mss { + firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn", + "qcom/LENOVO/81F1/qcdsp28998.mbn"; +}; + &sdhc2 { cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; }; -- cgit v1.2.3 From c00b5c280d552d4e11f62424522a334b9bc39cc1 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 5 Jun 2020 20:59:13 +0200 Subject: arm64: dts: qcom: msm8916: Set #address-cells for lpass As of commit 4ff028f6c108 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable"), lpass now supports children nodes to configure the MI2S SD lines to use for one of the I2S ports. For example: lpass@7708000 { dai@3 { reg = ; qcom,playback-sd-lines = <1>; }; }; The "reg" property refers to the DAI number in this case, so we need to set #address-cells and #size-cells appropriately to avoid DTC warnings. Cc: Srinivas Kandagatla Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200605185916.318494-1-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 32bd140ac9fd..b0f9cfaba1ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -700,6 +700,9 @@ interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; + + #address-cells = <1>; + #size-cells = <0>; }; lpass_codec: codec{ -- cgit v1.2.3 From 1b6a1a162defe649c5599d661b58ac64bb6f31b6 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 5 Jun 2020 20:59:14 +0200 Subject: arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio pin configurations. This was likely copied from the qcom kernel fork where the same property was used for these audio pins. However, "bias-pull-none" actually does not exist at all - not in mainline and not in downstream. I can only guess that the original intention was to configure "no pull", i.e. bias-disable. Change it to that instead. Fixes: 143bb9ad85b7 ("arm64: dts: qcom: add audio pinctrls") Cc: Srinivas Kandagatla Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index e9c00367f7fd..5785bf0a807c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -556,7 +556,7 @@ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; cdc_pdm_lines_sus: pdm-lines-off { @@ -585,7 +585,7 @@ pins = "gpio113", "gpio114", "gpio115", "gpio116"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; @@ -613,7 +613,7 @@ pinconf { pins = "gpio110"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; @@ -639,7 +639,7 @@ pinconf { pins = "gpio116"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; ext_mclk_tlmm_lines_sus: mclk-lines-off { @@ -667,7 +667,7 @@ pins = "gpio112", "gpio117", "gpio118", "gpio119"; drive-strength = <8>; - bias-pull-none; + bias-disable; }; }; ext_sec_tlmm_lines_sus: tlmm-lines-off { -- cgit v1.2.3 From e2ee9edc282961783d519c760bbaa20fed4dec38 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 5 Jun 2020 20:59:15 +0200 Subject: arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep The original qcom kernel changed the PDM GPIOs to be pull-down during sleep at some point. Reportedly this was done because there was some "leakage at PDM outputs during sleep": https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0 I cannot say how effective this is, but everything seems to work fine with this change so let's apply the same to mainline just to be sure. Cc: Srinivas Kandagatla Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 5785bf0a807c..591f48a57535 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -569,7 +569,7 @@ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68"; drive-strength = <2>; - bias-disable; + bias-pull-down; }; }; }; -- cgit v1.2.3 From 34da47b1cee89ac43c9412acf1850b49e6755bbd Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Fri, 5 Jun 2020 20:59:16 +0200 Subject: arm64: dts: qcom: apq8016-sbc: Replace spaces with tabs apq8016-sbc.dtsi uses spaces on some lines instead of tabs. Make this consistent by converting them to tabs. Also remove some redundant comments from the DAI link definitions - this is already visible from the comment block before the "sound" node or the device node entries itself. Cc: Srinivas Kandagatla Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200605185916.318494-4-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 75 ++++++++++++++++--------------- 1 file changed, 38 insertions(+), 37 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 8a4b790aa7ff..364014c96632 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -453,22 +453,23 @@ */ - sound: sound { - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; + sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + status = "okay"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + external-dai-link@0 { link-name = "ADV7533"; - cpu { /* QUAT */ + cpu { sound-dai = <&lpass MI2S_QUATERNARY>; }; codec { @@ -476,26 +477,26 @@ }; }; - internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ - link-name = "WCD"; - cpu { /* PRIMARY */ - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { /* I2S - Internal codec */ - link-name = "WCD-Capture"; - cpu { /* PRIMARY */ - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; - }; + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; spmi@200f000 { pm8916@0 { @@ -650,9 +651,9 @@ }; &wcd_codec { - status = "okay"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; -- cgit v1.2.3 From e0d9accee26e81a5f50928221674eac90b735f4e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Jun 2020 03:43:31 +0300 Subject: arm64: dts: qcom: sm8250: add watchdog device Add on-SoC watchdog device node. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200604004331.669936-7-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 5a14790bb0cd..daad5d45e6bd 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -419,6 +419,12 @@ interrupts = ; }; + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + }; + timer@17c20000 { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From 1e7594a38f37854ea94bc4e5ecc4e700c0a2e36f Mon Sep 17 00:00:00 2001 From: Rakesh Pillai Date: Sat, 20 Jun 2020 21:27:15 +0530 Subject: arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node Add device node for the ath10k SNOC platform driver probe and add resources required for WCN3990 on sc7180 soc. Signed-off-by: Rakesh Pillai Link: https://lore.kernel.org/r/1592668635-10894-1-git-send-email-pillair@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 11 +++++++++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 4e9149d82d09..39dbfc89689e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -389,6 +389,17 @@ }; }; +&wifi { + status = "okay"; + vdd-0.8-cx-mx = <&vreg_l9a_0p6>; + vdd-1.8-xo = <&vreg_l1c_1p8>; + vdd-1.3-rfa = <&vreg_l2c_1p3>; + vdd-3.3-ch0 = <&vreg_l10c_3p3>; + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &qspi_clk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 5b022bc5623d..3a8076c8bdbf 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2814,6 +2814,28 @@ #freq-domain-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + iommus = <&apps_smmu 0xc0 0x1>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + memory-region = <&wlan_mem>; + status = "disabled"; + }; }; thermal-zones { -- cgit v1.2.3 From 366c37978eb842dc1142dd4f9ae7774891db5e0d Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Wed, 17 Jun 2020 16:45:15 +0300 Subject: arm64: dts: msm8916: Add interconnect provider DT nodes Add nodes for the network-on-chip interconnect buses present on MSM8916-based platforms. Tested-by: Stephan Gerhold Signed-off-by: Georgi Djakov Link: https://lore.kernel.org/r/20200617134515.25229-1-georgi.djakov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index b0f9cfaba1ed..67cae5f9e47e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -406,11 +407,38 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + restart@4ab000 { compatible = "qcom,pshold"; reg = <0x4ab000 0x4>; }; + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + msmgpio: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x1000000 0x300000>; -- cgit v1.2.3 From d2fa630cea44df8e391cec5a3fa480668944e873 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Tue, 9 Jun 2020 12:14:55 +0530 Subject: arm64: dts: qcom: sm8150: Add thermal zones and throttling support sm8150 has 27 thermal sensors split across two tsens controllers. Add the thermal zones to expose them and wireup the cpus to throttle their frequencies on crossing passive temperature thresholds. Signed-off-by: Amit Kucheria Link: https://lore.kernel.org/r/1cdbebe6f7f69ccd8468a4138b56e8a200289d95.1591684754.git.amit.kucheria@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 811 +++++++++++++++++++++++++++++++++++ 1 file changed, 811 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 141c21dfa68c..bbbbe3658711 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include / { interrupt-parent = <&intc>; @@ -46,6 +47,7 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -62,6 +64,7 @@ enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -76,6 +79,7 @@ enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -89,6 +93,7 @@ enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -102,6 +107,7 @@ enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -115,6 +121,7 @@ enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -128,6 +135,7 @@ enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -631,6 +640,28 @@ #power-domain-cells = <1>; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, @@ -864,4 +895,784 @@ , ; }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; -- cgit v1.2.3 From b33d2868e8d343e33e847ee979a9719daa2a4eac Mon Sep 17 00:00:00 2001 From: Jack Pham Date: Fri, 10 Apr 2020 17:52:42 -0700 Subject: arm64: dts: qcom: sm8150: Add USB and PHY device nodes Add device nodes for the USB3 controller, QMP SS PHY and SNPS HS PHY. Signed-off-by: Jack Pham Signed-off-by: Wesley Cheng Reviewed-by: Bjorn Andersson Reviewed-by: Vinod Koul Tested-by: Vinod Koul Link: https://lore.kernel.org/r/1586566362-21450-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 21 ++++++++ arch/arm64/boot/dts/qcom/sm8150.dtsi | 92 +++++++++++++++++++++++++++++++++ 2 files changed, 113 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts index 8ab16611ebe8..6c6325c3af59 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -408,3 +408,24 @@ vdda-pll-supply = <&vreg_l3c_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index bbbbe3658711..7a0c5b419ff0 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -630,6 +630,98 @@ }; }; + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8150-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = , + , + , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x100000>; -- cgit v1.2.3 From cbc142c89543eb8c506ae0e0f0a36c82d91b5171 Mon Sep 17 00:00:00 2001 From: Sivaprakash Murugesan Date: Tue, 9 Jun 2020 17:05:11 +0530 Subject: arm64: dts: ipq8074: enable sdhci node Enable mmc device found on ipq8074 devices Signed-off-by: Sivaprakash Murugesan Link: https://lore.kernel.org/r/1591702511-18571-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 4 ++++ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 22 ++++++++++++++++++++++ 2 files changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 6754cb0638f4..390e8d289961 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -82,3 +82,7 @@ nand-bus-width = <8>; }; }; + +&sdhc_1 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5303821300b4..ba13b7b62059 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -169,6 +169,28 @@ #reset-cells = <0x1>; }; + sdhc_1: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "xo", "iface", "core"; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + + status = "disabled"; + }; + blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; -- cgit v1.2.3 From 5de47779cf7cf9584f3a2f45124014480eab950b Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 16 Jun 2020 18:15:54 +0100 Subject: ARM: dts: qcom: add qfprom definition to ipq806x Add missing qfprom definition for ipq806x SoC Signed-off-by: Jonathan McDowell Link: https://lore.kernel.org/r/20200616171554.GA5632@earth.li Signed-off-by: Bjorn Andersson --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 9c0d5510c805..c51481405e7f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -425,6 +425,13 @@ qcom,controller-type = "pmic-arbiter"; }; + qfprom: qfprom@700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + gcc: clock-controller@900000 { compatible = "qcom,gcc-ipq8064"; reg = <0x00900000 0x4000>; -- cgit v1.2.3 From 380af2b7d1e2102529b26594083ed198cfb08548 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 21 Jun 2020 22:28:22 +0300 Subject: arm64: dts: qcom: pm8009: Add base dts file Add base DTS file for pm8009 along with GPIOs and power-on nodes. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200621192824.2069145-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/pm8009.dtsi | 37 ++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm8009.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi new file mode 100644 index 000000000000..b126d7e7e4fb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include + +&spmi_bus { + pmic@a { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8009_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + }; + + pm8009_gpios: gpio@c000 { + compatible = "qcom,pm8005-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@b { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; -- cgit v1.2.3 From 6304b5e9605767e5f9f20bd498ef39590c3bb38b Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 21 Jun 2020 22:28:23 +0300 Subject: arm64: dts: qcom: sm8250-mtp: include pmic files Include files describing used PMIC chips, GPIOs, power on, etc nodes. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200621192824.2069145-2-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index cff7a85890ee..aa37eb112d85 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -7,6 +7,10 @@ #include #include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" / { model = "Qualcomm Technologies, Inc. SM8250 MTP"; -- cgit v1.2.3 From 4c5a410d3bad42c37bc85364f926a19934066a72 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 21 Jun 2020 22:28:24 +0300 Subject: arm64: dts: qcom: pm8150x: add thermal alarms and thermal zones Add temperature alarm and thermal zone configuration to all three pm8150 instances. Configuration is largely based on the msm-4.19 tree. These alarms use main adc of the pmic. Separate temperature adc is not supported yet. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200621192824.2069145-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/pm8150.dtsi | 42 +++++++++++++++++++++++++++++++-- arch/arm64/boot/dts/qcom/pm8150b.dtsi | 44 ++++++++++++++++++++++++++++++++--- arch/arm64/boot/dts/qcom/pm8150l.dtsi | 44 ++++++++++++++++++++++++++++++++--- 3 files changed, 122 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index c0b197458665..1b6406927509 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -9,6 +9,37 @@ #include #include +/ { + thermal-zones { + pm8150 { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8150_0: pmic@0 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; @@ -30,6 +61,15 @@ }; }; + pm8150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + pm8150_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -38,8 +78,6 @@ #io-channel-cells = <1>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = ; qcom,pre-scaling = <1 1>; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi index 40b5d75a4a1d..e112e8876db6 100644 --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -8,6 +8,37 @@ #include #include +/ { + thermal-zones { + pm8150b { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@2 { compatible = "qcom,pm8150b", "qcom,spmi-pmic"; @@ -22,7 +53,16 @@ status = "disabled"; }; - adc@3100 { + pm8150b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150b_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +70,6 @@ #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = ; qcom,pre-scaling = <1 1>; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi index cf05e0685d10..62139538b7d9 100644 --- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -8,6 +8,37 @@ #include #include +/ { + thermal-zones { + pm8150l { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@4 { compatible = "qcom,pm8150l", "qcom,spmi-pmic"; @@ -22,7 +53,16 @@ status = "disabled"; }; - adc@3100 { + pm8150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150l_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +70,6 @@ #io-channel-cells = <1>; interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = ; qcom,pre-scaling = <1 1>; -- cgit v1.2.3 From 16951b490b2073d860b30745998f1df621bb8c86 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Thu, 30 Apr 2020 11:17:16 -0700 Subject: arm64: dts: qcom: sm8250: Add TLMM pinctrl node Add the TLMM pinctrl node for SM8250 and reserve pins 28-31 and 40-43 on the MTP as firmware does not allow Linux to touch these pins. Reviewed-by: Dmitry Baryshkov Tested-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200430181716.3797842-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 15 +++++++++++++++ 2 files changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index aa37eb112d85..2fc9e7ff0060 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -359,6 +359,10 @@ status = "okay"; }; +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index daad5d45e6bd..169cfcad561d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -410,6 +410,21 @@ #interrupt-cells = <4>; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8250-pinctrl"; + reg = <0 0x0f100000 0 0x300000>, + <0 0x0f500000 0 0x300000>, + <0 0x0f900000 0 0x300000>; + reg-names = "west", "south", "north"; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 180>; + wakeup-parent = <&pdc>; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; -- cgit v1.2.3 From e5813b15763b347ca07d864f4924c545125af30f Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 6 Jun 2020 16:13:00 +0300 Subject: arm64: dts: qcom: sm8250: add I2C and SPI nodes Much like SDM845 each serial engine has 4 pins attached. Add all possible I2C and SPI nodes for all 20 serial engines. Tested-by: Manivannan Sadhasivam Reviewed-by: Manivannan Sadhasivam Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20200606131300.3874987-1-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 1147 ++++++++++++++++++++++++++++++++++ 1 file changed, 1147 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 169cfcad561d..e583a01cbcf1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -15,6 +15,49 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + i2c16 = &i2c16; + i2c17 = &i2c17; + i2c18 = &i2c18; + i2c19 = &i2c19; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + spi16 = &spi16; + spi17 = &spi17; + spi18 = &spi18; + spi19 = &spi19; + }; + chosen { }; clocks { @@ -286,6 +329,394 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; }; + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; @@ -297,6 +728,136 @@ ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; @@ -305,6 +866,32 @@ interrupts = ; status = "disabled"; }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; ufs_mem_hc: ufshc@1d84000 { @@ -423,6 +1010,566 @@ #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 180>; wakeup-parent = <&pdc>; + + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio28", "gpio29"; + function = "qup0"; + }; + + config { + pins = "gpio28", "gpio29"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio115", "gpio116"; + function = "qup2"; + }; + + config { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio119", "gpio120"; + function = "qup3"; + }; + + config { + pins = "gpio119", "gpio120"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio8", "gpio9"; + function = "qup4"; + }; + + config { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio12", "gpio13"; + function = "qup5"; + }; + + config { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio16", "gpio17"; + function = "qup6"; + }; + + config { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio20", "gpio21"; + function = "qup7"; + }; + + config { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio24", "gpio25"; + function = "qup8"; + }; + + config { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio125", "gpio126"; + function = "qup9"; + }; + + config { + pins = "gpio125", "gpio126"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio129", "gpio130"; + function = "qup10"; + }; + + config { + pins = "gpio129", "gpio130"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio60", "gpio61"; + function = "qup11"; + }; + + config { + pins = "gpio60", "gpio61"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio32", "gpio33"; + function = "qup12"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio36", "gpio37"; + function = "qup13"; + }; + + config { + pins = "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio40", "gpio41"; + function = "qup14"; + }; + + config { + pins = "gpio40", "gpio41"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio44", "gpio45"; + function = "qup15"; + }; + + config { + pins = "gpio44", "gpio45"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio48", "gpio49"; + function = "qup16"; + }; + + config { + pins = "gpio48", "gpio49"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio52", "gpio53"; + function = "qup17"; + }; + + config { + pins = "gpio52", "gpio53"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio56", "gpio57"; + function = "qup18"; + }; + + config { + pins = "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup19"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_spi0_default: qup-spi0-default { + mux { + pins = "gpio28", "gpio29", + "gpio30", "gpio31"; + function = "qup0"; + }; + + config { + pins = "gpio28", "gpio29", + "gpio30", "gpio31"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi1_default: qup-spi1-default { + mux { + pins = "gpio4", "gpio5", + "gpio6", "gpio7"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5", + "gpio6", "gpio7"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi2_default: qup-spi2-default { + mux { + pins = "gpio115", "gpio116", + "gpio117", "gpio118"; + function = "qup2"; + }; + + config { + pins = "gpio115", "gpio116", + "gpio117", "gpio118"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi3_default: qup-spi3-default { + mux { + pins = "gpio119", "gpio120", + "gpio121", "gpio122"; + function = "qup3"; + }; + + config { + pins = "gpio119", "gpio120", + "gpio121", "gpio122"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi4_default: qup-spi4-default { + mux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "qup4"; + }; + + config { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi5_default: qup-spi5-default { + mux { + pins = "gpio12", "gpio13", + "gpio14", "gpio15"; + function = "qup5"; + }; + + config { + pins = "gpio12", "gpio13", + "gpio14", "gpio15"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi6_default: qup-spi6-default { + mux { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + function = "qup6"; + }; + + config { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi7_default: qup-spi7-default { + mux { + pins = "gpio20", "gpio21", + "gpio22", "gpio23"; + function = "qup7"; + }; + + config { + pins = "gpio20", "gpio21", + "gpio22", "gpio23"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi8_default: qup-spi8-default { + mux { + pins = "gpio24", "gpio25", + "gpio26", "gpio27"; + function = "qup8"; + }; + + config { + pins = "gpio24", "gpio25", + "gpio26", "gpio27"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi9_default: qup-spi9-default { + mux { + pins = "gpio125", "gpio126", + "gpio127", "gpio128"; + function = "qup9"; + }; + + config { + pins = "gpio125", "gpio126", + "gpio127", "gpio128"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi10_default: qup-spi10-default { + mux { + pins = "gpio129", "gpio130", + "gpio131", "gpio132"; + function = "qup10"; + }; + + config { + pins = "gpio129", "gpio130", + "gpio131", "gpio132"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi11_default: qup-spi11-default { + mux { + pins = "gpio60", "gpio61", + "gpio62", "gpio63"; + function = "qup11"; + }; + + config { + pins = "gpio60", "gpio61", + "gpio62", "gpio63"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi12_default: qup-spi12-default { + mux { + pins = "gpio32", "gpio33", + "gpio34", "gpio35"; + function = "qup12"; + }; + + config { + pins = "gpio32", "gpio33", + "gpio34", "gpio35"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi13_default: qup-spi13-default { + mux { + pins = "gpio36", "gpio37", + "gpio38", "gpio39"; + function = "qup13"; + }; + + config { + pins = "gpio36", "gpio37", + "gpio38", "gpio39"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi14_default: qup-spi14-default { + mux { + pins = "gpio40", "gpio41", + "gpio42", "gpio43"; + function = "qup14"; + }; + + config { + pins = "gpio40", "gpio41", + "gpio42", "gpio43"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi15_default: qup-spi15-default { + mux { + pins = "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "qup15"; + }; + + config { + pins = "gpio44", "gpio45", + "gpio46", "gpio47"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi16_default: qup-spi16-default { + mux { + pins = "gpio48", "gpio49", + "gpio50", "gpio51"; + function = "qup16"; + }; + + config { + pins = "gpio48", "gpio49", + "gpio50", "gpio51"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi17_default: qup-spi17-default { + mux { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + function = "qup17"; + }; + + config { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi18_default: qup-spi18-default { + mux { + pins = "gpio56", "gpio57", + "gpio58", "gpio59"; + function = "qup18"; + }; + + config { + pins = "gpio56", "gpio57", + "gpio58", "gpio59"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi19_default: qup-spi19-default { + mux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup19"; + }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; + }; + }; }; intc: interrupt-controller@17a00000 { -- cgit v1.2.3 From 32369aa1f8869736f24143021d976ec77f7c390c Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Sat, 13 Jun 2020 19:43:45 +0300 Subject: arm64: dts: ti: k3-am65-wakeup: add k3 platforms chipid module node Add DT node for the Texas Instruments K3 Multicore AM65x SoC platforms chipid module. Signed-off-by: Grygorii Strashko Reviewed-by: Lokesh Vutla Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 54a133fa1bf2..f7b9bc562e00 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -34,6 +34,11 @@ }; }; + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x43000014 0x4>; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; reg = <0x4301c000 0x118>; -- cgit v1.2.3 From 23d160ef6385eb10b8ef0fb9f92798ce2dd4ba23 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Sat, 13 Jun 2020 19:43:46 +0300 Subject: arm64: dts: ti: k3-j721e-mcu-wakeup: add k3 platforms chipid module node Add DT node for the Texas Instruments K3 Multicore J721E SoC platforms chipid module. Signed-off-by: Grygorii Strashko Reviewed-by: Lokesh Vutla Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index dc31bd0434cb..e468cc1f8e4d 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -48,6 +48,11 @@ }; }; + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x0 0x43000014 0x0 0x4>; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ -- cgit v1.2.3 From eac99d38f861893cf818fa1d0c8ebe75916039c1 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Tue, 19 May 2020 13:50:27 +0530 Subject: arm64: dts: ti: k3-am654-main: Update otap-del-sel values According to the latest AM65x Data Manual[1], a different output tap delay value is optimum for a given speed mode. Update these values. [1] http://www.ti.com/lit/gpn/am6526 Signed-off-by: Faiz Abbas Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 61815228e230..3a4effee8fba 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -244,7 +244,17 @@ interrupts = ; mmc-ddr-1_8v; mmc-hs200-1_8v; - ti,otap-del-sel = <0x2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x5>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x5>; + ti,otap-del-sel-hs400 = <0x0>; ti,trm-icp = <0x8>; dma-coherent; }; -- cgit v1.2.3 From 12fa1078efc871604d62e992cb8a038421b82096 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 28 May 2020 11:12:48 +0800 Subject: arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang Reviewed-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index c6bf8ba811cc..6a85ae340ee1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -467,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 9a4b65a267d4..0625cc880ccc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -374,7 +374,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index c81cb0094f5e..d35cb7ee6c35 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -313,7 +313,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mp-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 54bed643ed5b..2cb8f0c74f8c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -542,7 +542,7 @@ }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mq-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; -- cgit v1.2.3 From bbfc59bec2ad6e68be38232941e2e67fd3dcd1d8 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Mon, 1 Jun 2020 16:20:01 +0800 Subject: arm64: dts: imx8m: add mu node Add mu node to let A53 could communicate with M Core. Signed-off-by: Peng Fan Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++++++ arch/arm64/boot/dts/freescale/imx8mn.dtsi | 8 ++++++++ arch/arm64/boot/dts/freescale/imx8mp.dtsi | 8 ++++++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 8 ++++++++ 4 files changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 6a85ae340ee1..76f040e4be5e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -775,6 +775,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MM_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 0625cc880ccc..9385dd7d1a2f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -675,6 +675,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MN_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index d35cb7ee6c35..f6591c693226 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -627,6 +627,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MP_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + i2c5: i2c@30ad0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 2cb8f0c74f8c..f70435cf9ad5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -963,6 +963,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = ; + clocks = <&clk IMX8MQ_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc"; -- cgit v1.2.3 From 4870c76c00d178956cf3e1c17aab6b00a61dc30f Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 22 Jun 2020 21:25:53 +0200 Subject: arm64: dts: qcom: pm660(l): Add base dts files Add base DTS files for pm660(l) along with GPIOs, power-on and rtc nodes. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200622192558.152828-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/pm660.dtsi | 50 ++++++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/pm660l.dtsi | 36 ++++++++++++++++++++++++++ 2 files changed, 86 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm660.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm660l.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi new file mode 100644 index 000000000000..ea0e9558d0f2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include +#include +#include + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pon: pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; + + }; + + pm660_gpios: gpios@c000 { + compatible = "qcom,pm660-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660_gpios 0 0 13>; + #gpio-cells = <2>; + interrupt-controller; + interrupt-cells =<2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi new file mode 100644 index 000000000000..edba6de02084 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include +#include +#include + +&spmi_bus { + + pmic@2 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660l_gpios: gpios@c000 { + compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660l_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + -- cgit v1.2.3 From b190fb010664c769da16c5240be0e972cb3b267a Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 22 Jun 2020 21:25:54 +0200 Subject: arm64: dts: qcom: sdm630: Add sdm630 dts file Add devicetree files for SDM630 SoC and its pin configuration. This commit adds basic nodes like cpu, psci and other required configuration for booting up from eMMC to the serial console. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200622192558.152828-5-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 1174 ++++++++++++++++++++++++++++++++++ 1 file changed, 1174 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi new file mode 100644 index 000000000000..88efe8200c80 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi @@ -0,0 +1,1174 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + PWR_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <200>; + }; + + PWR_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PERF_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <154>; + exit-latency-us = <87>; + min-residency-us = <200>; + }; + + PERF_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <262>; + exit-latency-us = <301>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <284>; + exit-latency-us = <384>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <272>; + exit-latency-us = <329>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <332>; + exit-latency-us = <368>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <545>; + exit-latency-us = <1609>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998", "qcom,scm"; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_msa_guard: wlan-msa-guard@85600000 { + reg = <0x0 0x85600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: wlan-msa-mem@85700000 { + reg = <0x0 0x85700000 0x0 0x100000>; + no-map; + }; + + qhee_code: qhee-code@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + smem_region: smem-mem@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3300000>; + no-map; + }; + + modem_fw_mem: modem-fw-region@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0x7e00000>; + no-map; + }; + + adsp_fw_mem: adsp-fw-region@92a00000 { + reg = <0x0 0x92a00000 0x0 0x1e00000>; + no-map; + }; + + pil_mba_mem: pil-mba-region@94800000 { + reg = <0x0 0x94800000 0x0 0x200000>; + no-map; + }; + + buffer_mem: buffer-region@94a00000 { + reg = <0x0 0x94a00000 0x0 0x100000>; + no-map; + }; + + venus_fw_mem: venus-fw-region@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + + secure_region2: secure-region2@f7c00000 { + reg = <0x0 0xf7c00000 0x0 0x5c00000>; + no-map; + }; + + adsp_mem: adsp-region@f6000000 { + reg = <0x0 0xf6000000 0x0 0x800000>; + no-map; + }; + + qseecom_ta_mem: qseecom-ta-region@fec00000 { + reg = <0x0 0xfec00000 0x0 0x1000000>; + no-map; + }; + + qseecom_mem: qseecom-region@f6800000 { + reg = <0x0 0xf6800000 0x0 0x1400000>; + no-map; + }; + + secure_display_memory: secure-region@f5c00000 { + reg = <0x0 0xf5c00000 0x0 0x5c00000>; + no-map; + }; + + cont_splash_mem: cont-splash-region@9d400000 { + reg = <0x0 0x9d400000 0x0 0x23ff000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sdm660"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0x94000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo_board>, + <&sleep_clk>; + }; + + rpm_msg_ram: memory@778000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,qfprom"; + reg = <0x00780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0x00793000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + restart@10ac000 { + compatible = "qcom,pshold"; + reg = <0x010ac000 0x4>; + }; + + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x01f40000 0x20000>; + }; + + tlmm: pinctrl@3000000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03000000 0xc00000>; + interrupts = ; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_tx_active: blsp2-uart1-tx-active { + pins = "gpio16"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep { + pins = "gpio16"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active { + pins = "gpio17", "gpio18"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep { + pins = "gpio17", "gpio18"; + drive-strength = <2>; + bias-no-pull; + }; + + blsp2_uart1_rfr_active: blsp2-uart1-rfr-active { + pins = "gpio19"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep { + pins = "gpio19"; + drive-strength = <2>; + bias-no-pull; + }; + + i2c1_default: i2c1-default { + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c2_default: i2c2-default { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c4_default: i2c4-default { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c5_default: i2c5-default { + pins = "gpio18", "gpio19"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + pins = "gpio18", "gpio19"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c6_default: i2c6-default { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c7_default: i2c7-default { + pins = "gpio26", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + pins = "gpio26", "gpio27"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c8_default: i2c8-default { + pins = "gpio30", "gpio31"; + drive-strength = <2>; + bias-disable; + }; + + i2c8_sleep: i2c8-sleep { + pins = "gpio30", "gpio31"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc1_clk_on: sdc1-clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_data_off: sdc1-data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + kgsl_smmu: iommu@5040000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + , + , + + , + , + , + , + , + , + , + ; + }; + + lpass_smmu: iommu@5100000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05100000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + sdhc_1: sdhci@c0c4000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c0c4000 0x1000>, + <0x0c0c5000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + }; + + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart1: serial@c16f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c16f000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@c170000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c170000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp2_uart1: serial@c1af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active + &blsp2_uart1_rfr_active>; + pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep + &blsp2_uart1_rfr_sleep>; + status = "disabled"; + }; + + blsp_i2c5: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c7: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c8: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = ; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c8_default>; + pinctrl-1 = <&i2c8_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,sdm660-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + clock-frequency = <19200000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = ; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + -- cgit v1.2.3 From e781633b6067eee13001faa1175851e91143d738 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Mon, 22 Jun 2020 21:25:55 +0200 Subject: arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add device tree support for the Sony Xperia XA2, XA2 Plus and XA2 Ultra smartphones. They are all based on the Sony Nile platform (sdm630) and share a lot of common code. The differences are really minor, so a Nile-common DTSI has been created to reduce clutter. XA2 - Pioneer XA2 Plus - Voyager XA2 Ultra - Discovery The boards currently support: * Screen console * SDHCI * I2C * pstore log dump * GPIO keys * PSCI idle states Signed-off-by: Konrad Dybcio Tested-by: Łukasz Patron Link: https://lore.kernel.org/r/20200622192558.152828-6-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 3 + .../dts/qcom/sdm630-sony-xperia-nile-discovery.dts | 13 ++ .../dts/qcom/sdm630-sony-xperia-nile-pioneer.dts | 13 ++ .../dts/qcom/sdm630-sony-xperia-nile-voyager.dts | 20 +++ .../boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 136 +++++++++++++++++++++ 5 files changed, 185 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0f2c33d611df..1cad7cb07574 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -16,6 +16,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts new file mode 100644 index 000000000000..8fca0b69fa01 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Ultra"; + compatible = "sony,discovery-row", "qcom,sdm630"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts new file mode 100644 index 000000000000..90dcd4ebaaed --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2"; + compatible = "sony,pioneer-row", "qcom,sdm630"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts new file mode 100644 index 000000000000..fae5f1bb6834 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Plus"; + compatible = "sony,voyager-row", "qcom,sdm630"; + + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2160 * 1080 * 4)>; + height = <2160>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi new file mode 100644 index 000000000000..9ba359c848d0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <318 0>; + qcom,board-id = <8 1>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; + + /* This part enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + status= "okay"; + }; + }; + + gpio_keys { + status = "okay"; + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + camera_focus { + label = "Camera Focus"; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + camera_snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + debounce-interval = <15>; + }; + + vol_down { + label = "Volume Down"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + status = "okay"; + }; + + debug_region@ffb00000 { + reg = <0x00 0xffb00000 0x00 0x100000>; + no-map; + }; + + removed_region@85800000 { + reg = <0x00 0x85800000 0x00 0x3700000>; + no-map; + }; + }; + + soc { + sdhci@c0c4000 { + status = "okay"; + + mmc-ddr-1_8v; + /* SoMC Nile platform's eMMC doesn't support HS200 mode */ + mmc-hs400-1_8v; + }; + + i2c@c175000 { + status = "okay"; + + /* Synaptics touchscreen */ + }; + + i2c@c176000 { + status = "okay"; + + /* SMB1351 charger */ + }; + + serial@c1af000 { + status = "okay"; + }; + + /* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + + i2c@c1b6000 { + status = "okay"; + + /* NXP NFC */ + }; + }; +}; -- cgit v1.2.3 From 234d7d6b4cbfab0e900f12658053689bb3376141 Mon Sep 17 00:00:00 2001 From: Martin Botka Date: Mon, 22 Jun 2020 21:25:56 +0200 Subject: arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) Add device tree support for the Sony Xperia 10 and 10 Plus smartphones. They are all based on the Sony Ganges platform (sdm630/636) and share a lot of common code. The differences are really minor, so a Ganges-common DTSI has been created to reduce clutter. 10 - Kirin 10 Plus - Mermaid This platform is based on SoMC Nile, but there are some major differences when it comes to pin configuration and panel setup (among others). The boards currently support: * Screen console * SDHCI * I2C * pstore log dump * GPIO keys * PSCI idle states Signed-off-by: Martin Botka Signed-off-by: Konrad Dybcio Tested-by: Martin Botka Link: https://lore.kernel.org/r/20200622192558.152828-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 2 ++ .../dts/qcom/sdm630-sony-xperia-ganges-kirin.dts | 13 +++++++ .../boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi | 40 ++++++++++++++++++++++ .../dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts | 20 +++++++++++ 4 files changed, 75 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1cad7cb07574..c98bafe03a96 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -16,9 +16,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts new file mode 100644 index 000000000000..46a7f2b26e6b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-ganges.dtsi" + +/ { + model = "Sony Xperia 10"; + compatible = "sony,kirin-row", "qcom,sdm630"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi new file mode 100644 index 000000000000..cf2e8b5d60e8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +/* Ganges is very similar to Nile, but + * there are some differences that will need + * to be addresed when more peripherals are + * enabled upstream. Hence the separate DTSI. + */ +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; + height = <2520>; + }; + }; + + /* Yes, this is intentional. + * Ganges devices only use gpio-keys for + * Volume Down, but currently there's an + * issue with it that has to be resolved. + * Until then, let's not make the kernel panic + */ + /delete-node/ gpio-keys; + + soc { + + i2c@c175000 { + status = "okay"; + + /* Novatek touchscreen */ + }; + }; + +}; diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts new file mode 100644 index 000000000000..7c0830e6a48c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +/* Mermaid uses sdm636, but it's different ever so slightly + * that we can ignore it for the time being. Sony also commonizes + * the Ganges platform as a whole in downstream kernels. + */ +#include "sdm630-sony-xperia-ganges.dtsi" + +/ { + model = "Sony Xperia 10 Plus"; + compatible = "sony,mermaid-row", "qcom,sdm636"; + + qcom,msm-id = <345 0>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>; +}; -- cgit v1.2.3 From 44f45d5cc75c533579061806d14e3c3406abb74f Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Jun 2020 14:49:52 +0800 Subject: arm64: dts: imx8qxp: add alias for lsio MU Add lsio mu alias for all lsio MUs that could communicate with SCU, imx_scu_enable_general_irq_channel will parse the alias to get the mu resource id, if using other MU, not MU1, the `mu_resource_id` is not what we expect, so add alias to fix this issue. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index d1c3c98e4b39..33363c127478 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -30,7 +30,11 @@ mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; + mu0 = &lsio_mu0; mu1 = &lsio_mu1; + mu2 = &lsio_mu2; + mu3 = &lsio_mu3; + mu4 = &lsio_mu4; serial0 = &adma_lpuart0; serial1 = &adma_lpuart1; serial2 = &adma_lpuart2; -- cgit v1.2.3 From 33b8250f1b27e8cef79d3c06fdbbcdb6fa0387e5 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Jun 2020 14:49:53 +0800 Subject: arm64: dts: imx8qxp: add i2c aliases The devices could be enumerated properly with aliases. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 33363c127478..3b2fada99c09 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -27,6 +27,10 @@ gpio5 = &lsio_gpio5; gpio6 = &lsio_gpio6; gpio7 = &lsio_gpio7; + i2c0 = &adma_i2c0; + i2c1 = &adma_i2c1; + i2c2 = &adma_i2c2; + i2c3 = &adma_i2c3; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; -- cgit v1.2.3 From 3c8f8d8f6b28ffea1aa69ee222bfd232fdffd93b Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Tue, 23 Jun 2020 14:49:54 +0800 Subject: arm64: dts: imx8qxp: Add ethernet alias Add ethernet alias, so bootloader code can use this to find the primary ethernet device, and set the MAC address. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 3b2fada99c09..e46faac1fe71 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -19,6 +19,8 @@ #size-cells = <2>; aliases { + ethernet0 = &fec1; + ethernet1 = &fec2; gpio0 = &lsio_gpio0; gpio1 = &lsio_gpio1; gpio2 = &lsio_gpio2; -- cgit v1.2.3 From f2fe45d503b2d19a83b2b6fd7d69ab85da83232f Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 11 Jun 2020 09:36:53 +0800 Subject: arm64: dts: imx8mp: Add fallback compatible to ocotp node Add "fsl,imx8mm-ocotp" as fallback compatible of i.MX8MP ocotp to support SoC serial_number read. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index f6591c693226..90bdef8447fa 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -314,7 +314,7 @@ }; ocotp: efuse@30350000 { - compatible = "fsl,imx8mp-ocotp", "syscon"; + compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ -- cgit v1.2.3 From 578bd8e08fdf4a23c3de5cf78da7a4dd3b025d79 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 11:31:59 +0200 Subject: ARM: tegra: Add missing clock-names for SDHCI on Tegra114 The Tegra SDHCI controller bindings state that the clock-names property is required, so add the missing properties on Tegra114. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 450a1f1b12a0..01a81d380f1f 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -649,6 +649,7 @@ reg = <0x78000000 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; + clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; status = "disabled"; @@ -659,6 +660,7 @@ reg = <0x78000200 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC2>; + clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; status = "disabled"; @@ -669,6 +671,7 @@ reg = <0x78000400 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC3>; + clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; status = "disabled"; @@ -679,6 +682,7 @@ reg = <0x78000600 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC4>; + clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; status = "disabled"; -- cgit v1.2.3 From 901c865340f86009c444c43dc8de1bf7b6d6ff89 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:00:14 +0200 Subject: ARM: tegra: Remove simple clocks bus The standard way to do this is to list out the clocks at the top-level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-dalmore.dts | 15 ++++----------- arch/arm/boot/dts/tegra114-roth.dts | 15 ++++----------- arch/arm/boot/dts/tegra114-tn7.dts | 15 ++++----------- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 15 ++++----------- arch/arm/boot/dts/tegra124-nyan.dtsi | 15 ++++----------- arch/arm/boot/dts/tegra124-venice2.dts | 15 ++++----------- arch/arm/boot/dts/tegra20-harmony.dts | 15 ++++----------- arch/arm/boot/dts/tegra20-paz00.dts | 15 ++++----------- arch/arm/boot/dts/tegra20-seaboard.dts | 15 ++++----------- arch/arm/boot/dts/tegra20-tamonten.dtsi | 15 ++++----------- arch/arm/boot/dts/tegra20-trimslice.dts | 15 ++++----------- arch/arm/boot/dts/tegra20-ventana.dts | 15 ++++----------- arch/arm/boot/dts/tegra30-beaver.dts | 15 ++++----------- arch/arm/boot/dts/tegra30-cardhu.dtsi | 15 ++++----------- 14 files changed, 56 insertions(+), 154 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 08be733ee2cd..04adfcb30cd7 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1152,17 +1152,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 3d3835591cd2..73b83d51b59b 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1016,17 +1016,10 @@ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index bfdd1bf61816..94e801b7986e 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -273,17 +273,10 @@ power-supply = <&lcd_bl_en>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 1b567e2d5ce0..fdd171e1bcc5 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1862,17 +1862,10 @@ vbus-supply = <&vdd_usb3_vbus>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 9b1af50cd4b8..927ef7a1e7c8 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -579,17 +579,10 @@ 256>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 73361dbe2e43..18cb73ffb00a 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1061,17 +1061,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 02cd67ea2503..bdfbe26fa26a 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -640,17 +640,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index cce3a3fb82ed..bfc9625a6c72 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -569,17 +569,10 @@ backlight-boot-off; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 376ecb6435f4..28dcff3b7d7e 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -792,17 +792,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 20137fc578b1..aef5f7e638ee 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -502,17 +502,10 @@ status = "okay"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; regulators { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 8debd3d3c20d..272a06619ae5 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -379,17 +379,10 @@ bus-width = <4>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 022649119821..59998d3708a1 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -586,17 +586,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 6b6fd8a8058f..ef3ea08f8d19 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1965,17 +1965,10 @@ status = "okay"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-leds { diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 5ee5d141bd81..c166967b6c3f 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -418,17 +418,10 @@ default-brightness-level = <6>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; panel: panel { -- cgit v1.2.3 From 1cf17aa67a87940fda323b4ee252acfb996654bb Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:01:32 +0200 Subject: ARM: tegra: Remove simple regulators bus The standard way to do this is to list out the regulators at the top level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-dalmore.dts | 129 +++++++-------- arch/arm/boot/dts/tegra114-roth.dts | 120 ++++++-------- arch/arm/boot/dts/tegra114-tn7.dts | 65 ++++---- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 238 +++++++++++++-------------- arch/arm/boot/dts/tegra124-nyan.dtsi | 259 ++++++++++++++--------------- arch/arm/boot/dts/tegra124-venice2.dts | 263 ++++++++++++++---------------- arch/arm/boot/dts/tegra20-harmony.dts | 121 ++++++-------- arch/arm/boot/dts/tegra20-medcom-wide.dts | 66 ++++---- arch/arm/boot/dts/tegra20-paz00.dts | 38 ++--- arch/arm/boot/dts/tegra20-plutux.dts | 66 ++++---- arch/arm/boot/dts/tegra20-seaboard.dts | 125 +++++++------- arch/arm/boot/dts/tegra20-tamonten.dtsi | 22 +-- arch/arm/boot/dts/tegra20-tec.dts | 66 ++++---- arch/arm/boot/dts/tegra20-trimslice.dts | 85 +++++----- arch/arm/boot/dts/tegra20-ventana.dts | 85 +++++----- arch/arm/boot/dts/tegra30-beaver.dts | 193 ++++++++++------------ arch/arm/boot/dts/tegra30-cardhu-a02.dts | 126 +++++++------- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 147 ++++++++--------- arch/arm/boot/dts/tegra30-cardhu.dtsi | 261 ++++++++++++++--------------- 19 files changed, 1122 insertions(+), 1353 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 04adfcb30cd7..1dfff574e371 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1187,83 +1187,70 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_ac_bat_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_ac_bat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - dvdd_ts_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "dvdd_ts"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; - }; + dvdd_ts_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "dvdd_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + }; - usb1_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&tps65090_dcdc1_reg>; - }; + usb1_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; - usb3_vbus_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&tps65090_dcdc1_reg>; - }; + usb3_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&tps65090_dcdc1_reg>; + }; - vdd_hdmi_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "vdd_hdmi_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&tps65090_dcdc1_reg>; - }; + vdd_hdmi_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_hdmi_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&tps65090_dcdc1_reg>; + }; - vdd_cam_1v8_reg: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "vdd_cam_1v8_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&palmas_gpio 6 0>; - }; + vdd_cam_1v8_reg: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "vdd_cam_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&palmas_gpio 6 0>; + }; - vdd_5v0_hdmi: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "VDD_5V0_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&tps65090_dcdc1_reg>; - }; + vdd_5v0_hdmi: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&tps65090_dcdc1_reg>; }; sound { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 73b83d51b59b..5249afdca577 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -1045,76 +1045,64 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - lcd_bl_en: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "lcd_bl_en"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - }; + lcd_bl_en: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; - vdd_lcd: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_lcd_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vdd_1v8>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - }; + vdd_lcd: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_lcd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd_1v8_ts"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>; - regulator-boot-on; - }; + regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; - regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vdd_3v3_ts"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - }; + regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; - regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "vdd_1v8_com"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vdd_1v8>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - }; + regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_com"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; - regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "vdd_3v3_com"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_sys>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; - regulator-always-on; - regulator-boot-on; - }; + regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 94e801b7986e..90935db591a5 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -302,44 +302,35 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - /* FIXME: output of BQ24192 */ - vs_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VS_SYS"; - regulator-min-microvolt = <4200000>; - regulator-max-microvolt = <4200000>; - regulator-always-on; - regulator-boot-on; - }; + /* FIXME: output of BQ24192 */ + vs_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VS_SYS"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; - lcd_bl_en: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_LCD_BL"; - regulator-min-microvolt = <16500000>; - regulator-max-microvolt = <16500000>; - gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vs_sys>; - regulator-boot-on; - }; + lcd_bl_en: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_LCD_BL"; + regulator-min-microvolt = <16500000>; + regulator-max-microvolt = <16500000>; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vs_sys>; + regulator-boot-on; + }; - vdd_lcd: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "VD_LCD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_1v8>; - regulator-boot-on; - }; + vdd_lcd: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + regulator-boot-on; }; }; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index fdd171e1bcc5..d2adb510c558 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1886,145 +1886,127 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_usb1_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+USB0_VBUS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb1_vbus: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+USB0_VBUS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_3v3_lp0: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_lp0: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_hdmi_pll: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_hdmi_pll: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_5v0_hdmi: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_hdmi: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - /* Molex power connector */ - vdd_5v0_sata: regulator@13 { - compatible = "regulator-fixed"; - reg = <13>; - regulator-name = "+5V_SATA"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + /* Molex power connector */ + vdd_5v0_sata: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_12v0_sata: regulator@14 { - compatible = "regulator-fixed"; - reg = <14>; - regulator-name = "+12V_SATA"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_12v0_sata: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+12V_SATA"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; }; sound { diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 927ef7a1e7c8..cd43863cd98b 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -612,157 +612,138 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_LED"; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; - vdd_5v0_ts: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_VDD_TS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb1_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_3v3_panel: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; - vdd_3v3_lp0: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_hdmi_pll: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_5v0_hdmi: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; }; sound { diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 18cb73ffb00a..a2457c6cc6ee 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1086,159 +1086,140 @@ ddc-i2c-bus = <&dpaux>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; - vdd_5v0_ts: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_VDD_TS_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_ts: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_VDD_TS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb1_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_3v3_panel: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_panel: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pmic 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_run>; + }; - vdd_3v3_lp0: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_hdmi_pll: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_5v0_hdmi: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; }; sound { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index bdfbe26fa26a..b051d75d4642 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -666,79 +666,66 @@ backlight = <&backlight>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - }; + regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pci_vdd_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vdd_1v05"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + pci_vdd_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_pnl_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "vdd_pnl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_pnl_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_bl_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "vdd_bl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_bl_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_5v0_hdmi: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "VDDIO_HDMI"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_reg>; - }; + vdd_5v0_hdmi: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; }; sound { diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index c73510cd501c..049181421a86 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -92,44 +92,38 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; - regulators { - vcc_24v_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vcc_24v"; - regulator-min-microvolt = <24000000>; - regulator-max-microvolt = <24000000>; - regulator-always-on; - }; + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; - vdd_5v0_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "vdd_5v0"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "vdd_3v3"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - vdd_1v8_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "vdd_1v8"; - vin-supply = <&vdd_3v3_reg>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index bfc9625a6c72..2a0e5754f50f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -606,30 +606,22 @@ backlight = <&backlight>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - p5valw_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+5valw"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + p5valw_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+5valw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_pnl_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+3VS,vdd_pnl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_pnl_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+3VS,vdd_pnl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 429e4605fbdb..378f23b2958b 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -60,44 +60,38 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; - regulators { - vcc_24v_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vcc_24v"; - regulator-min-microvolt = <24000000>; - regulator-max-microvolt = <24000000>; - regulator-always-on; - }; + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; - vdd_5v0_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "vdd_5v0"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "vdd_3v3"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - vdd_1v8_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "vdd_1v8"; - vin-supply = <&vdd_3v3_reg>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 28dcff3b7d7e..9a1ab4bd43e0 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -828,81 +828,68 @@ ddc-i2c-bus = <&lvds_ddc>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - }; + regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vdd_vbus_wup1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(D, 0) 0>; - regulator-always-on; - regulator-boot-on; - }; + vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_vbus_wup1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 0) 0>; + regulator-always-on; + regulator-boot-on; + }; - vdd_pnl_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "vdd_pnl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_pnl_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_bl_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "vdd_bl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_bl_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_hdmi: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "VDDIO_HDMI"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_reg>; - }; + vdd_hdmi: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; }; sound { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index aef5f7e638ee..9b02b428c497 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -508,20 +508,12 @@ #clock-cells = <0>; }; - regulators { - compatible = "simple-bus"; - - #address-cells = <1>; - #size-cells = <0>; - - pci_vdd_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_1v05"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&pmic 2 0>; - enable-active-high; - }; + pci_vdd_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; }; }; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 4dec27737238..44ced60315de 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -69,44 +69,38 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; - regulators { - vcc_24v_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vcc_24v"; - regulator-min-microvolt = <24000000>; - regulator-max-microvolt = <24000000>; - regulator-always-on; - }; + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; - vdd_5v0_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "vdd_5v0"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "vdd_3v3"; - vin-supply = <&vcc_24v_reg>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - vdd_1v8_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "vdd_1v8"; - vin-supply = <&vdd_3v3_reg>; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 272a06619ae5..0c65a658be70 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -401,58 +401,47 @@ gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - hdmi_vdd_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "avdd_hdmi"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + hdmi_vdd_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - hdmi_pll_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "avdd_hdmi_pll"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + hdmi_pll_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(V, 2) 0>; - regulator-always-on; - regulator-boot-on; - }; + vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(V, 2) 0>; + regulator-always-on; + regulator-boot-on; + }; - pci_clk_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "pci_clk"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + pci_clk_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "pci_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - pci_vdd_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "pci_vdd"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - }; + pci_vdd_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "pci_vdd"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; }; sound { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 59998d3708a1..ccc24674be03 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -613,58 +613,47 @@ ddc-i2c-bus = <&lvds_ddc>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_1v5"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - }; + regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; - regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd_1v2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_pnl_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vdd_pnl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_pnl_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_bl_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "vdd_bl"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_bl_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index ef3ea08f8d19..3211c61f956c 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1984,118 +1984,103 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v_in_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v_in"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_5v_in_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v_in"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - chargepump_5v_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "chargepump_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - }; + chargepump_5v_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "chargepump_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; - ddr_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; - vin-supply = <&vdd_5v_in_reg>; - }; + ddr_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v_in_reg>; + }; - vdd_5v_sata_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "vdd_5v_sata"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; - vin-supply = <&vdd_5v_in_reg>; - }; + vdd_5v_sata_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v_sata"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v_in_reg>; + }; - usb1_vbus_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v_in_reg>; - }; + usb1_vbus_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; - usb3_vbus_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "usb3_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v_in_reg>; - }; + usb3_vbus_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v_in_reg>; + }; - sys_3v3_reg: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "sys_3v3,vdd_3v3_alw"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vdd_5v_in_reg>; - }; + sys_3v3_reg: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3,vdd_3v3_alw"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v_in_reg>; + }; - sys_3v3_pexs_reg: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "sys_3v3_pexs"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + sys_3v3_pexs_reg: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3_pexs"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_5v0_hdmi: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+VDD_5V_HDMI"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&sys_3v3_reg>; - }; + vdd_5v0_hdmi: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_5V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&sys_3v3_reg>; }; sound { diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index a02ec5082287..09e57c5f698d 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -16,80 +16,68 @@ keep-power-in-suspend; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - ddr_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vdd_ddr"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - }; + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "sys_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; - }; + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + }; - usb1_vbus_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v0_reg>; - }; + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; - usb3_vbus_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "usb3_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v0_reg>; - }; + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; - vdd_5v0_reg: regulator@104 { - compatible = "regulator-fixed"; - reg = <104>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; - }; + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + }; - vdd_bl_reg: regulator@105 { - compatible = "regulator-fixed"; - reg = <105>; - regulator-name = "vdd_bl"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; - }; + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 9234988624ec..c9ad4e566407 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -18,92 +18,79 @@ keep-power-in-suspend; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - ddr_reg: regulator@100 { - compatible = "regulator-fixed"; - regulator-name = "ddr"; - reg = <100>; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; - }; + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "sys_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - }; + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + }; - usb1_vbus_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "usb1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v0_reg>; - }; + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; - usb3_vbus_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "usb3_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v0_reg>; - }; + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; - vdd_5v0_reg: regulator@104 { - compatible = "regulator-fixed"; - reg = <104>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; - }; + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; + }; - vdd_bl_reg: regulator@105 { - compatible = "regulator-fixed"; - reg = <105>; - regulator-name = "vdd_bl"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; - }; + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; + }; - vdd_bl2_reg: regulator@106 { - compatible = "regulator-fixed"; - reg = <106>; - regulator-name = "vdd_bl2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; - }; + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; i2c@7000d000 { diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index c166967b6c3f..c8dc3b6ab2f6 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -434,158 +434,139 @@ backlight = <&backlight>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_ac_bat_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_ac_bat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - cam_1v8_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "cam_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; - cp_5v_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "cp_5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; - }; + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; - emmc_3v3_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "emmc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - modem_3v3_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "modem_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; - }; + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; + }; - pex_hvdd_3v3_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "pex_hvdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_cam1_ldo_reg: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "vdd_cam1_ldo"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_cam2_ldo_reg: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "vdd_cam2_ldo"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_cam3_ldo_reg: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "vdd_cam3_ldo"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_com_reg: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "vdd_com"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_fuse_3v3_reg: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "vdd_fuse_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_pnl1_reg: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "vdd_pnl1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; - vdd_vid_reg: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "vddio_vid"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; - gpio-open-drain; - vin-supply = <&vdd_5v0_reg>; - }; + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; }; sound { -- cgit v1.2.3 From 19ed4866f8aae9bfe478d59853cc66ad379bd162 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 18:59:27 +0200 Subject: ARM: tegra: Remove battery-name property This property is not documented and will cause a validation failure. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-dalmore.dts | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 1dfff574e371..584db54cd750 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -769,7 +769,6 @@ battery: smart-battery@b { compatible = "ti,bq20z45", "sbs,sbs-battery"; reg = <0xb>; - battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <100>; power-supplies = <&charger>; -- cgit v1.2.3 From da2ebcfd9a0157baa9347869ff378618a5b4bb45 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:02:50 +0200 Subject: ARM: tegra: roth: Use the correct DSI/CSI supply The correct DSI/CSI supply property is called vdd-dsi-csi-supply, so use that instead of the wrong vdd-supply property. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-roth.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 5249afdca577..7378b5d6f2fa 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -37,7 +37,7 @@ dsi@54300000 { status = "okay"; - vdd-supply = <&vdd_1v2_ap>; + avdd-dsi-csi-supply = <&vdd_1v2_ap>; panel@0 { compatible = "lg,lh500wx1-sd03"; -- cgit v1.2.3 From 6768e43d614d52e5e64c53c89f5d8d8d5b3f4469 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:05:12 +0200 Subject: ARM: tegra: tn7: Use the correct DSI/CSI supply The correct DSI/CSI supply property is called vdd-dsi-csi-supply, so use that instead of the wrong vdd-supply property. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-tn7.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 90935db591a5..0e520ae1109d 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -37,7 +37,7 @@ dsi@54300000 { status = "okay"; - vdd-supply = <&vdd_1v2_ap>; + avdd-dsi-csi-supply = <&vdd_1v2_ap>; panel@0 { compatible = "lg,ld070wx3-sl01"; -- cgit v1.2.3 From f0fd20a54f882bb8f1cfc345d5f8e034d528d984 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 11:59:09 +0200 Subject: ARM: tegra: Do not mark host1x as simple bus The host1x is not a simple bus, so drop the corresponding compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 2 +- arch/arm/boot/dts/tegra124.dtsi | 2 +- arch/arm/boot/dts/tegra20.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 01a81d380f1f..be048aa553ee 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -18,7 +18,7 @@ }; host1x@50000000 { - compatible = "nvidia,tegra114-host1x", "simple-bus"; + compatible = "nvidia,tegra114-host1x"; reg = <0x50000000 0x00028000>; interrupts = , /* syncpt */ ; /* general */ diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 94cac13d3e50..fc124343658e 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -85,7 +85,7 @@ }; host1x@50000000 { - compatible = "nvidia,tegra124-host1x", "simple-bus"; + compatible = "nvidia,tegra124-host1x"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c3b8ad53b967..7319df2fcd3e 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -31,7 +31,7 @@ }; host1x@50000000 { - compatible = "nvidia,tegra20-host1x", "simple-bus"; + compatible = "nvidia,tegra20-host1x"; reg = <0x50000000 0x00024000>; interrupts = , /* syncpt */ ; /* general */ diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index d2d05f1da274..0b58863e570e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -111,7 +111,7 @@ }; host1x@50000000 { - compatible = "nvidia,tegra30-host1x", "simple-bus"; + compatible = "nvidia,tegra30-host1x"; reg = <0x50000000 0x00024000>; interrupts = , /* syncpt */ ; /* general */ -- cgit v1.2.3 From 6cc05ba2e27a211ef8feef24cb11e554f6559452 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 12:00:03 +0200 Subject: ARM: tegra: Add missing host1x properties The host1x device tree bindings require the clock- and interrupt-names properties to be present, so add them where missing. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 2 ++ arch/arm/boot/dts/tegra124.dtsi | 2 ++ arch/arm/boot/dts/tegra20.dtsi | 2 ++ arch/arm/boot/dts/tegra30.dtsi | 2 ++ 4 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index be048aa553ee..a0ac9ea9ec9d 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -22,7 +22,9 @@ reg = <0x50000000 0x00028000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA114_CLK_HOST1X>; + clock-names = "host1x"; resets = <&tegra_car 28>; reset-names = "host1x"; iommus = <&mc TEGRA_SWGROUP_HC>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index fc124343658e..1afed8496c95 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -89,7 +89,9 @@ reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA124_CLK_HOST1X>; + clock-names = "host1x"; resets = <&tegra_car 28>; reset-names = "host1x"; iommus = <&mc TEGRA_SWGROUP_HC>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 7319df2fcd3e..f0a172c61b26 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -35,7 +35,9 @@ reg = <0x50000000 0x00024000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA20_CLK_HOST1X>; + clock-names = "host1x"; resets = <&tegra_car 28>; reset-names = "host1x"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 0b58863e570e..27000f0ba35b 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -115,7 +115,9 @@ reg = <0x50000000 0x00024000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA30_CLK_HOST1X>; + clock-names = "host1x"; resets = <&tegra_car 28>; reset-names = "host1x"; iommus = <&mc TEGRA_SWGROUP_HC>; -- cgit v1.2.3 From 46d36c40f525786b5b2793fbd71473992bf21f05 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 12:01:21 +0200 Subject: ARM: tegra: gr2d is not backwards-compatible The instantiation of gr2d in Tegra114 is not backwards-compatible with the version found on earlier chips. While the hardware IP is identical, the compatible string also describes the integration of the IP, which in the case of Tegra114 is slightly different in that it's part of the HEG power partition, whereas it wasn't previously. Drop the misleading compatible string so that drivers that support the older integrations cannot match on it. Since they wouldn't be able to control the power partition, such driver wouldn't be able to access any of the registers of the IP. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index a0ac9ea9ec9d..d583dfba688f 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -35,7 +35,7 @@ ranges = <0x54000000 0x54000000 0x01000000>; gr2d@54140000 { - compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d"; + compatible = "nvidia,tegra114-gr2d"; reg = <0x54140000 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_GR2D>; -- cgit v1.2.3 From ff32afae58d2157db07076348ac671c35d3d8f0b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 12:01:52 +0200 Subject: ARM: tegra: gr3d is not backwards-compatible The instantiation of gr3d in Tegra114 is not backwards-compatible with the version found on earlier chips. Remove the misleading compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index d583dfba688f..392f06107b32 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -46,7 +46,7 @@ }; gr3d@54180000 { - compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d"; + compatible = "nvidia,tegra114-gr3d"; reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_GR3D>; resets = <&tegra_car 24>; -- cgit v1.2.3 From 9d304b0721384219941d9f91815658be2e1750fa Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 12:02:55 +0200 Subject: ARM: tegra: The Tegra114 DC is not backwards-compatible The display controller on Tegra114 is in fact not backwards-compatible with the instantiation found on earlier SoCs. Drop the misleading compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 392f06107b32..a06b88b01ef3 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -56,7 +56,7 @@ }; dc@54200000 { - compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + compatible = "nvidia,tegra114-dc"; reg = <0x54200000 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_DISP1>, @@ -75,7 +75,7 @@ }; dc@54240000 { - compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + compatible = "nvidia,tegra114-dc"; reg = <0x54240000 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_DISP2>, -- cgit v1.2.3 From 20b091f1360f6546cc04d74184f8f4d2ae186380 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Sun, 22 Dec 2019 14:54:21 +0100 Subject: arm64: tegra: Add missing #phy-cells property on Jetson TX2 PHYs need to have a #phy-cells property that defines how many cells are required in their specifier. The standard Ethernet PHY doesn't require a specifier, so set its #phy-cells to 0. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 2fcaa2e64370..de049d8d458a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -50,6 +50,8 @@ interrupt-parent = <&gpio>; interrupts = ; + + #phy-cells = <0>; }; }; }; -- cgit v1.2.3 From a10b9a2075dc800563f16f5697aa0c7409c03dd3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:46:29 +0200 Subject: arm64: tegra: Add missing #phy-cells property on Jetson AGX Xavier PHYs need to have a #phy-cells property that defines how many cells are required in their specifier. The standard Ethernet PHY doesn't require a specifier, so set its #phy-cells to 0. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index b96eb4e14556..f3781e86f321 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -44,6 +44,7 @@ reg = <0x0>; interrupt-parent = <&gpio>; interrupts = ; + #phy-cells = <0>; }; }; }; -- cgit v1.2.3 From aa78032cab9c66a13580e4a564202bec16e6688f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Sun, 22 Dec 2019 14:59:02 +0100 Subject: arm64: tegra: Fix #address-cells/#size-cells for SRAM on Tegra186 The standard mmio-sram bindings require the #address- and #size-cells properties to be 1. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 58100fb9cd8b..373f575b8678 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1216,20 +1216,20 @@ sysram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x30000000 0x50000>; cpu_bpmp_tx: shmem@4e000 { compatible = "nvidia,tegra186-bpmp-shmem"; - reg = <0x0 0x4e000 0x0 0x1000>; + reg = <0x4e000 0x1000>; label = "cpu-bpmp-tx"; pool; }; cpu_bpmp_rx: shmem@4f000 { compatible = "nvidia,tegra186-bpmp-shmem"; - reg = <0x0 0x4f000 0x0 0x1000>; + reg = <0x4f000 0x1000>; label = "cpu-bpmp-rx"; pool; }; -- cgit v1.2.3 From 59a9dd64b7bc296964474071d4591222153274a3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Jan 2020 12:32:07 +0100 Subject: arm64: tegra: Use standard notation for interrupts It is customary to use angle brackets around each tuple in the interrupts property. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 373f575b8678..50b56168fc97 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1199,8 +1199,8 @@ compatible = "nvidia,gp10b"; reg = <0x0 0x17000000 0x0 0x1000000>, <0x0 0x18000000 0x0 0x1000000>; - interrupts = ; + interrupts = , + ; interrupt-names = "stall", "nonstall"; clocks = <&bpmp TEGRA186_CLK_GPCCLK>, -- cgit v1.2.3 From 2c3578b3f3094719dba305c947b89127312781af Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Jan 2020 13:41:11 +0100 Subject: arm64: tegra: Remove extra compatible for Tegra194 SDHCI The SDHCI on Tegra194 is in fact not compatible with the one found on Tegra186. Remove the extra compatible string to reflect that. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 4bc187a4eacd..ae438b2c4dd9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -450,7 +450,7 @@ }; sdmmc1: sdhci@3400000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + compatible = "nvidia,tegra194-sdhci"; reg = <0x03400000 0x10000>; interrupts = ; clocks = <&bpmp TEGRA194_CLK_SDMMC1>; @@ -472,7 +472,7 @@ }; sdmmc3: sdhci@3440000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + compatible = "nvidia,tegra194-sdhci"; reg = <0x03440000 0x10000>; interrupts = ; clocks = <&bpmp TEGRA194_CLK_SDMMC3>; @@ -495,7 +495,7 @@ }; sdmmc4: sdhci@3460000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + compatible = "nvidia,tegra194-sdhci"; reg = <0x03460000 0x10000>; interrupts = ; clocks = <&bpmp TEGRA194_CLK_SDMMC4>; -- cgit v1.2.3 From b3fa0e03faa7c6798525ce70d64a19bc7c6aa6ce Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Jan 2020 13:41:56 +0100 Subject: arm64: tegra: Remove extra compatible for Tegra210 SDHCI The SDHCI on Tegra210 is in fact not compatible with the one found on Tegra124. Remove the extra compatible string to reflect that. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 08655081f72d..cbf0d30a2f8b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1177,7 +1177,7 @@ }; sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -1205,7 +1205,7 @@ }; sdhci@700b0200 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; @@ -1222,7 +1222,7 @@ }; sdhci@700b0400 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; @@ -1245,7 +1245,7 @@ }; sdhci@700b0600 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; -- cgit v1.2.3 From 954490b30cb4dd994b556d355d500ab5c6300946 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 13 Dec 2019 14:07:33 +0100 Subject: arm64: tegra: Describe interconnect paths on Tegra186 The interface used by clients of the memory controller can be configured in a number of different ways. Describe this path using the interconnect bindings to enable the configuration of these parameters. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 56 +++++++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 50b56168fc97..12039000d137 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -60,6 +60,9 @@ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; resets = <&bpmp TEGRA186_RESET_EQOS>; reset-names = "eqos"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_EQOS>; status = "disabled"; @@ -139,12 +142,13 @@ }; }; - memory-controller@2c00000 { + mc: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; interrupts = ; status = "disabled"; + #interconnect-cells = <1>; #address-cells = <2>; #size-cells = <2>; @@ -163,6 +167,8 @@ clocks = <&bpmp TEGRA186_CLK_EMC>; clock-names = "emc"; + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; }; }; @@ -335,6 +341,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC1>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc1_3v3>; @@ -361,6 +370,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC2>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc2_3v3>; @@ -382,6 +394,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC3>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc3_3v3>; @@ -408,6 +423,9 @@ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; @@ -436,6 +454,9 @@ <&bpmp TEGRA186_RESET_HDA2CODEC_2X>; reset-names = "hda", "hda2hdmi", "hda2codec_2x"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_HDA>; status = "disabled"; }; @@ -564,6 +585,9 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; power-domain-names = "xusb_host", "xusb_ss"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_XUSB_HOST>; #address-cells = <1>; #size-cells = <0>; @@ -786,6 +810,10 @@ <&bpmp TEGRA186_RESET_PCIEXCLK>; reset-names = "afi", "pex", "pcie_x"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_AFI>; iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>; iommu-map-mask = <0x0>; @@ -921,6 +949,10 @@ #size-cells = <1>; ranges = <0x15000000 0x0 0x15000000 0x01000000>; + + interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; + iommus = <&smmu TEGRA186_SID_HOST1X>; dpaux1: dpaux@15040000 { @@ -992,6 +1024,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&dsia &dsib &sor0 &sor1>; @@ -1008,6 +1043,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&dsia &dsib &sor0 &sor1>; @@ -1024,6 +1062,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1>; @@ -1056,6 +1097,9 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_VIC>; }; @@ -1211,6 +1255,11 @@ status = "disabled"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>; + interconnect-names = "dma-mem", "write-0", "read-1", "write-1"; }; sysram@30000000 { @@ -1237,6 +1286,11 @@ bpmp: bpmp { compatible = "nvidia,tegra186-bpmp"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; iommus = <&smmu TEGRA186_SID_BPMP>; mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; -- cgit v1.2.3 From d5237c7c9bbee0e6d56376c9b1ba795e5b50fa65 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 13 Dec 2019 11:21:33 +0100 Subject: arm64: tegra: Describe interconnect paths on Tegra194 On Tegra194, all clients of the memory subsystem can generally address 40 bits of system memory. However, bit 39 has special meaning and will cause the memory controller to reorder sectors for block-linear buffer formats. This is primarily useful for graphics-related devices. Use of bit 39 must be controlled on a case-by-case basis. Buffers that are used with bit 39 set by one device may be used with bit 39 cleared by other devices. Care must be taken to allocate buffers at addresses that do not require bit 39 to be set. This is normally not an issue for system memory since there are no Tegra-based systems with enough RAM to exhaust the 39-bit physical address space. However, when a device is behind an IOMMU, such as the ARM SMMU on Tegra194, the IOMMUs input address space can cause IOVA allocations to happen in this region. This is for example the case when an operating system implements a top-down allocation policy for IO virtual addresses. To account for this, describe the path that memory accesses take through the system. Memory clients will send requests to the memory controller, which forwards bits [38:0] of the address either to the external memory controller or the SMMU, depending on the stream ID of the access. A good way to describe this is using the interconnects bindings, see: Documentation/devicetree/bindings/interconnect/interconnect.txt The standard "dma-mem" path is used to describe the path towards system memory via the memory controller. A dma-ranges property in the memory controller's device tree node limits the range of DMA addresses that the memory clients can use to bits [38:0], ensuring that bit 39 is not used. Signed-off-by: Thierry Reding --- Changes in v4: - add additional entries for interconnect-names to match interconnects - add EMC as destination for interconnect paths Changes in v3: - add missing interconnect properties for VIC Changes in v2: - use memory client IDs instead of stream IDs (Mikko Perttunen) Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 70 ++++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index ae438b2c4dd9..a50504a317d7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -59,6 +59,9 @@ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; resets = <&bpmp TEGRA194_RESET_EQOS>; reset-names = "eqos"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>; + interconnect-names = "dma-mem", "write"; status = "disabled"; snps,write-requests = <1>; @@ -176,6 +179,7 @@ reg = <0x02c00000 0x100000>, <0x02b80000 0x040000>, <0x01700000 0x100000>; + #interconnect-cells = <1>; status = "disabled"; #address-cells = <2>; @@ -209,6 +213,8 @@ clocks = <&bpmp TEGRA194_CLK_EMC>; clock-names = "emc"; + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; }; }; @@ -457,6 +463,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = @@ -479,6 +488,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; @@ -506,6 +518,9 @@ <&bpmp TEGRA194_CLK_PLLC4>; resets = <&bpmp TEGRA194_RESET_SDMMC4>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; @@ -534,6 +549,9 @@ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>; reset-names = "hda", "hda2codec_2x", "hda2hdmi"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; status = "disabled"; }; @@ -1032,6 +1050,8 @@ #size-cells = <1>; ranges = <0x15000000 0x15000000 0x01000000>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; display-hub@15200000 { compatible = "nvidia,tegra194-display", "simple-bus"; @@ -1067,6 +1087,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <0>; @@ -1082,6 +1105,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <1>; @@ -1097,6 +1123,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <2>; @@ -1112,6 +1141,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <3>; @@ -1128,6 +1160,9 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; }; dpaux0: dpaux@155c0000 { @@ -1404,9 +1439,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "read", "write"; }; pcie@14120000 { @@ -1449,9 +1489,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "read", "write"; }; pcie@14140000 { @@ -1494,9 +1539,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "read", "write"; }; pcie@14160000 { @@ -1539,9 +1589,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "read", "write"; }; pcie@14180000 { @@ -1584,9 +1639,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "read", "write"; }; pcie@141a0000 { @@ -1633,9 +1693,14 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ 0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "read", "write"; }; pcie_ep@14160000 { @@ -1767,6 +1832,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; -- cgit v1.2.3 From 8613b4c8688412f349243d1fee3060d051adf8e2 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Jan 2020 16:58:22 +0100 Subject: arm64: tegra: Add interrupt for Tegra194 memory controller This interrupt can be used for the operating system to be interrupted when certain events occur. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index a50504a317d7..73aba724bf67 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -179,6 +179,7 @@ reg = <0x02c00000 0x100000>, <0x02b80000 0x040000>, <0x01700000 0x100000>; + interrupts = ; #interconnect-cells = <1>; status = "disabled"; -- cgit v1.2.3 From 01a9d523017932d526b0e58f877038782b98a03f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 7 Feb 2020 17:59:20 +0100 Subject: arm64: tegra: Add Tegra132 compatible string for host1x While the host1x controller found on Tegra132 is the same as on Tegra124 it is good practice to also list a SoC-specific compatible string so any SoC-specific quirks can be implemented in drivers if necessary. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 11a1bb428595..6ebfe503489f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -83,7 +83,9 @@ }; host1x@50000000 { - compatible = "nvidia,tegra124-host1x", "simple-bus"; + compatible = "nvidia,tegra132-host1x", + "nvidia,tegra124-host1x", + "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ -- cgit v1.2.3 From 052d3f6523044cd7d6136e743d286a7ca1604c15 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 7 Feb 2020 18:02:08 +0100 Subject: arm64: tegra: Add interrupt-names for host1x Interrupt names are used to distinguish between the syncpoint and general host1x interrupts. Make sure they are available in the DT so that drivers can use them if necessary. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 1 + arch/arm64/boot/dts/nvidia/tegra186.dtsi | 1 + arch/arm64/boot/dts/nvidia/tegra194.dtsi | 1 + arch/arm64/boot/dts/nvidia/tegra210.dtsi | 1 + 4 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 6ebfe503489f..76e1a6451e83 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -89,6 +89,7 @@ reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA124_CLK_HOST1X>; clock-names = "host1x"; resets = <&tegra_car 28>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 12039000d137..1e9947cd607a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -940,6 +940,7 @@ reg-names = "hypervisor", "vm"; interrupts = , ; + interrupt-names = "syncpt", "host1x"; clocks = <&bpmp TEGRA186_CLK_HOST1X>; clock-names = "host1x"; resets = <&bpmp TEGRA186_RESET_HOST1X>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 73aba724bf67..f056158a2634 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1042,6 +1042,7 @@ reg-names = "hypervisor", "vm"; interrupts = , ; + interrupt-names = "syncpt", "host1x"; clocks = <&bpmp TEGRA194_CLK_HOST1X>; clock-names = "host1x"; resets = <&bpmp TEGRA194_RESET_HOST1X>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index cbf0d30a2f8b..0586722df64b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -90,6 +90,7 @@ reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA210_CLK_HOST1X>; clock-names = "host1x"; resets = <&tegra_car 28>; -- cgit v1.2.3 From 352092b0d367c6793910128c92914a6e28fb252a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 7 Feb 2020 18:17:58 +0100 Subject: arm64: tegra: Remove parent clock from display controllers The display controller's parent clock depends on the output that's consuming data from the display controller, so it needs to be specified as the parent of the corresponding output. The device tree bindings do specify this, so just correct the existing device trees that get this wrong. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 10 ++++------ arch/arm64/boot/dts/nvidia/tegra210.dtsi | 10 ++++------ 2 files changed, 8 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 76e1a6451e83..4fc34c5ec2dc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -104,9 +104,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_DISP1>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP1>; + clock-names = "dc"; resets = <&tegra_car 27>; reset-names = "dc"; @@ -119,9 +118,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_DISP2>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP2>; + clock-names = "dc"; resets = <&tegra_car 26>; reset-names = "dc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 0586722df64b..41ffa0531cd8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -187,9 +187,8 @@ compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA210_CLK_DISP1>, - <&tegra_car TEGRA210_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA210_CLK_DISP1>; + clock-names = "dc"; resets = <&tegra_car 27>; reset-names = "dc"; @@ -202,9 +201,8 @@ compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA210_CLK_DISP2>, - <&tegra_car TEGRA210_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA210_CLK_DISP2>; + clock-names = "dc"; resets = <&tegra_car 26>; reset-names = "dc"; -- cgit v1.2.3 From e8931a27ffe36fcc57c2d3e41b7445bc7360a09b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 7 Feb 2020 18:26:05 +0100 Subject: arm64: tegra: Fixup I/O and PLL supply names for HDMI/DP The I/O and PLL supplies used for HDMI/DP have alternative names. Use the names that are given in the hardware documentation for consistency. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 1af7f9ffb7b6..f35b0ba29cb5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -286,8 +286,8 @@ sor@15580000 { status = "okay"; - avdd-io-supply = <&vdd_hdmi_1v05>; - vdd-pll-supply = <&vdd_1v8_ap>; + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index e15d1eac05f5..9a7d136b467f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -145,8 +145,8 @@ sor@15b80000 { status = "okay"; - avdd-io-supply = <&vdd_1v0>; - vdd-pll-supply = <&vdd_1v8hs>; + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index b57d837d5fc7..411321e77cd8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -27,8 +27,8 @@ sor@54580000 { status = "okay"; - avdd-io-supply = <&avdd_1v05>; - vdd-pll-supply = <&vdd_1v8>; + avdd-io-hdmi-dp-supply = <&avdd_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9bc52fdb393c..53d7d4ed9588 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -77,8 +77,8 @@ sor@54580000 { status = "okay"; - avdd-io-supply = <&avdd_1v05>; - vdd-pll-supply = <&vdd_1v8>; + avdd-io-hdmi-dp-supply = <&avdd_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; -- cgit v1.2.3 From 772a6a7b856f208120bcaef68c09884fab956170 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 20:06:44 +0200 Subject: arm64: tegra: Add unit-address to memory node The memory node requires a unit-address. For some boards the bootloader, which is usually locked down, uses a hard-coded name for the memory node without a unit-address, so we can't fix it on those boards. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 9f3206c63900..d0d03cc30197 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index de049d8d458a..7b5b9bb332cf 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -27,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x2 0x00000000>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index cc6ed45a2b48..751775357d51 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index d0dc03923723..9ace2d9ea085 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 88a4b9333d84..615a8f5a6cf2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 53d7d4ed9588..146353f4c0cc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; }; -- cgit v1.2.3 From 67bb17f6109eb86fa752f70741e47404357bc7c6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 20:12:59 +0200 Subject: arm64: tegra: Rename sdhci nodes to mmc The new json-schema based validation tools require SD/MMC controller nodes to be named mmc. Rename all references to them. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 6 +++--- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 8 ++++---- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 10 +++++----- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 ++++---- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 8 ++++---- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 6 +++--- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++---- 15 files changed, 36 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index d0d03cc30197..e6fe62e5c234 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -894,12 +894,12 @@ }; /* WIFI/BT module */ - sdhci@700b0000 { + mmc@700b0000 { status = "disabled"; }; /* external SD/MMC */ - sdhci@700b0400 { + mmc@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; @@ -909,7 +909,7 @@ }; /* EMMC 4.51 */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 4fc34c5ec2dc..8558ad38b69c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -691,7 +691,7 @@ }; }; - sdhci@700b0000 { + mmc@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = ; @@ -702,7 +702,7 @@ status = "disabled"; }; - sdhci@700b0200 { + mmc@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = ; @@ -713,7 +713,7 @@ status = "disabled"; }; - sdhci@700b0400 { + mmc@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = ; @@ -724,7 +724,7 @@ status = "disabled"; }; - sdhci@700b0600 { + mmc@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = ; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index f35b0ba29cb5..37ec15a14c77 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -103,7 +103,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { status = "okay"; vmmc-supply = <&vdd_sd>; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 7b5b9bb332cf..d1ed7eee949a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -9,8 +9,8 @@ aliases { ethernet0 = "/ethernet@2490000"; - sdhci0 = "/sdhci@3460000"; - sdhci1 = "/sdhci@3400000"; + mmc0 = "/mmc@3460000"; + mmc1 = "/mmc@3400000"; serial0 = &uarta; i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; @@ -135,7 +135,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; @@ -143,12 +143,12 @@ }; /* SDMMC3 (SDIO) */ - sdhci@3440000 { + mmc@3440000 { status = "okay"; }; /* SDMMC4 (eMMC) */ - sdhci@3460000 { + mmc@3460000 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 1e9947cd607a..03b24f8640b3 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -333,7 +333,7 @@ status = "disabled"; }; - sdmmc1: sdhci@3400000 { + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>; interrupts = ; @@ -362,7 +362,7 @@ status = "disabled"; }; - sdmmc2: sdhci@3420000 { + sdmmc2: mmc@3420000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03420000 0x0 0x10000>; interrupts = ; @@ -386,7 +386,7 @@ status = "disabled"; }; - sdmmc3: sdhci@3440000 { + sdmmc3: mmc@3440000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03440000 0x0 0x10000>; interrupts = ; @@ -412,7 +412,7 @@ status = "disabled"; }; - sdmmc4: sdhci@3460000 { + sdmmc4: mmc@3460000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03460000 0x0 0x10000>; interrupts = ; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index f3781e86f321..442e333ac13f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -9,8 +9,8 @@ aliases { ethernet0 = "/cbb@0/ethernet@2490000"; - sdhci0 = "/cbb@0/sdhci@3460000"; - sdhci1 = "/cbb@0/sdhci@3400000"; + mmc0 = "/cbb@0/mmc@3460000"; + mmc1 = "/cbb@0/mmc@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; i2c1 = "/cbb@0/i2c@3160000"; @@ -58,12 +58,12 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; }; /* SDMMC4 (eMMC) */ - sdhci@3460000 { + mmc@3460000 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 9a7d136b467f..0f9868b6fd6b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -28,7 +28,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index f056158a2634..d5246c75b782 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -456,7 +456,7 @@ #pwm-cells = <2>; }; - sdmmc1: sdhci@3400000 { + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra194-sdhci"; reg = <0x03400000 0x10000>; interrupts = ; @@ -481,7 +481,7 @@ status = "disabled"; }; - sdmmc3: sdhci@3440000 { + sdmmc3: mmc@3440000 { compatible = "nvidia,tegra194-sdhci"; reg = <0x03440000 0x10000>; interrupts = ; @@ -507,7 +507,7 @@ status = "disabled"; }; - sdmmc4: sdhci@3460000 { + sdmmc4: mmc@3460000 { compatible = "nvidia,tegra194-sdhci"; reg = <0x03460000 0x10000>; interrupts = ; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 751775357d51..251c6099482a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -293,7 +293,7 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index 9ace2d9ea085..f9158dc943f9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -34,7 +34,7 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 411321e77cd8..1e74f50d17ee 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1505,7 +1505,7 @@ }; /* MMC/SD */ - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 615a8f5a6cf2..579d5b8a757d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1580,7 +1580,7 @@ status = "okay"; }; - sdhci@700b0600 { + mmc@700b0600 { bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 146353f4c0cc..aca01408c81f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -543,7 +543,7 @@ }; }; - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; @@ -561,7 +561,7 @@ hvdd-usb-supply = <&vdd_1v8>; }; - sdhci@700b0400 { + mmc@700b0400 { status = "okay"; bus-width = <4>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 2faab6390552..745f5a4fa161 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1697,7 +1697,7 @@ }; }; - sdhci@700b0600 { + mmc@700b0600 { bus-width = <8>; non-removable; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 41ffa0531cd8..1f7dc518b394 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1175,7 +1175,7 @@ }; }; - sdhci@700b0000 { + mmc@700b0000 { compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = ; @@ -1203,7 +1203,7 @@ status = "disabled"; }; - sdhci@700b0200 { + mmc@700b0200 { compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = ; @@ -1220,7 +1220,7 @@ status = "disabled"; }; - sdhci@700b0400 { + mmc@700b0400 { compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = ; @@ -1243,7 +1243,7 @@ status = "disabled"; }; - sdhci@700b0600 { + mmc@700b0600 { compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = ; -- cgit v1.2.3 From 877666435dc54d66f2e2d4d4ab60cabf30775506 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 15:27:42 -0700 Subject: arm64: dts: qcom: sm8250-mtp: Drop PM8150 ldo11 PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels, rather than as a regulator. As such it's available from the rpmhpd as the SM8250_LCX power domain. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Vinod Koul Fixes: ec13d5c23a33 ("arm64: dts: qcom: sm8250-mtp: Add pm8150, pm8150l and pm8009") Link: https://lore.kernel.org/r/20200622222747.717306-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 7 ------- 1 file changed, 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 2fc9e7ff0060..63d259931c4d 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -140,13 +140,6 @@ regulator-initial-mode = ; }; - vreg_l11a_0p75: ldo11 { - regulator-name = "vreg_l11a_0p75"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = ; - }; - vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; -- cgit v1.2.3 From e5361e75544f25848ac74b1088b813c47cc70bbe Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 15:27:43 -0700 Subject: arm64: dts: qcom: sm8250: Add IPCC Add the IPCC node, used to send and receive IPC signals with remoteprocs. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200622222747.717306-3-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index e583a01cbcf1..79c9e2ad1c83 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include @@ -329,6 +330,15 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; }; + ipcc: mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + qupv3_id_2: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x008c0000 0x0 0x6000>; -- cgit v1.2.3 From 087d537aec562a62b855b62cbf6e3c70ed6d7115 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 15:27:44 -0700 Subject: arm64: dts: qcom: sm8250: Add QMP AOSS node Add a node for the QMP AOSS. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200622222747.717306-4-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 79c9e2ad1c83..5462ed832dc1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -989,6 +990,19 @@ interrupt-controller; }; + aoss_qmp: qmp@c300000 { + compatible = "qcom,sm8250-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, -- cgit v1.2.3 From 8770a2a84e03cdee613de240c47ac57821357734 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 15:27:45 -0700 Subject: arm64: dts: qcom: sm8250: Add SMP2P nodes SMP2P is used for interrupting and being interrupted about remoteproc state changes related to the audio, compute and sensor subsystems. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200622222747.717306-5-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 72 ++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 5462ed832dc1..5b835a243456 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -314,6 +314,78 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From 23a8903785b9dc64abf97540fd6ea1b76944dcb6 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 15:27:46 -0700 Subject: arm64: dts: qcom: sm8250: Add remoteprocs Add remoteproc nodes for the audio, compute and sensor cores, define glink for each one and enable them on the MTP with appropriate firmware defined. Reviewed-by: Manivannan Sadhasivam Reviewed-by: Vinod Koul Link: https://lore.kernel.org/r/20200622222747.717306-6-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 15 +++++ arch/arm64/boot/dts/qcom/sm8250.dtsi | 116 ++++++++++++++++++++++++++++++++ 2 files changed, 131 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 63d259931c4d..6894f8490dae 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -55,6 +55,11 @@ }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + &apps_rsc { pm8150-rpmh-regulators { compatible = "qcom,pm8150-rpmh-regulators"; @@ -348,10 +353,20 @@ }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + &qupv3_id_1 { status = "okay"; }; +&slpi { + status = "okay"; + firmware-name = "qcom/sm8250/slpi.mbn"; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <40 4>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 5b835a243456..6fa2c24f5d74 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1052,6 +1052,83 @@ reg = <0x0 0x01f40000 0x0 0x40000>; }; + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8250-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, + <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <3>; + }; + }; + + cdsp: remoteproc@8300000 { + compatible = "qcom,sm8250-cdsp-pas"; + reg = <0 0x08300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, + <&rpmhpd SM8250_CX>; + power-domain-names = "load_state", "cx"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <5>; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8250-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; @@ -1668,6 +1745,45 @@ }; }; + adsp: remoteproc@17300000 { + compatible = "qcom,sm8250-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, + <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; -- cgit v1.2.3 From 7c865b09b0a133fb9af47b1df6ba413d66b570a1 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:00 +0200 Subject: arm64: dts: qcom: msm8994: Modernize the DTS style Following changes have been made: - remove name, compatible and msm-id - wrap clocks in clocks{} - order nodes by name and by address - clock_gcc -> gcc - msmgpio -> tlmm - qcom,smem -> smem - remove unit-address from smem - retire msm8994-pins.dtsi - add some of the missing pins - make comments C-style Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-2-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 30 --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 290 ++++++++++++++++++++++------- 2 files changed, 225 insertions(+), 95 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi deleted file mode 100644 index 2e118d967f53..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index b1c2d7d6a0f2..4cb3ff6b2e18 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -6,12 +6,6 @@ #include / { - model = "Qualcomm Technologies, Inc. MSM 8994"; - compatible = "qcom,msm8994"; - // msm-id and pmic-id are required by bootloader for - // proper selection of dt blob - qcom,msm-id = <207 0x20000>; - qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; interrupt-parent = <&intc>; #address-cells = <2>; @@ -19,6 +13,20 @@ chosen { }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -42,12 +50,27 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 2 0xff08>, - <1 3 0xff08>, - <1 4 0xff08>, - <1 1 0xff08>; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_mem: smem_region@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; }; soc: soc { @@ -62,7 +85,7 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; + <0xf9002000 0x1000>; }; timer@f9020000 { @@ -123,72 +146,209 @@ }; }; + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + status = "disabled"; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + restart@fc4ab000 { compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; }; - msmgpio: pinctrl@fd510000 { + tcsr_mutex_regs: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + tlmm: pinctrl@fd510000 { compatible = "qcom,msm8994-pinctrl"; reg = <0xfd510000 0x4000>; interrupts = ; gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; + gpio-ranges = <&tlmm 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - }; - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = ; - status = "disabled"; - clock-names = "core", "iface"; - clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, - <&clock_gcc GCC_BLSP1_AHB_CLK>; - }; + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; - }; + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; - clock_gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; - }; - }; + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46"; + drive-strength = <2>; + bias-disable; + }; - memory { - device_type = "memory"; - // We expect the bootloader to fill in the reg - reg = <0 0 0 0>; - }; + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46"; + drive-strength = <2>; + bias-pull-down; + }; - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; + i2c1_default: i2c1-default { + function = "blsp_i2c1"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + i2c1_sleep: i2c1-sleep { + function = "gpio"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; - smem_mem: smem_region@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default { + function = "blsp_i2c4"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + function = "gpio"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + i2c5_default: i2c5-default { + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi0_default: blsp1-spi0-default { + default { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio8"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_spi0_sleep: blsp1-spi0-sleep { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; }; @@ -198,12 +358,12 @@ #hwlock-cells = <1>; }; - qcom,smem@6a00000 { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; }; }; - -#include "msm8994-pins.dtsi" -- cgit v1.2.3 From b0ad598f8ec052682ce785a431335b0fc11672d5 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:01 +0200 Subject: arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device Add SPMI PMIC arbiter device to communicate with PMICs attached to SPMI bus. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-3-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 4cb3ff6b2e18..6d9641226411 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -169,6 +169,22 @@ reg = <0xfc4ab000 0x4>; }; + spmi_bus: spmi@fc4c0000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + tcsr_mutex_regs: syscon@fd484000 { compatible = "syscon"; reg = <0xfd484000 0x2000>; -- cgit v1.2.3 From 02d8091bbca00baa1ae586e960c02a7c9e062e22 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:02 +0200 Subject: arm64: dts: qcom: msm8994: Add a proper CPU map Add a proper CPU map to enable the use of all 8 cores. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 112 +++++++++++++++++++++++++++++++--- 1 file changed, 102 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 6d9641226411..88975f5eeb8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -28,24 +28,116 @@ }; cpus { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; }; - }; - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; }; }; }; -- cgit v1.2.3 From 448d9c221672aa34412d5c922426eeb481ae2037 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:04 +0200 Subject: arm64: dts: qcom: msm8994: Add SDHCI1 node Enable support for SDHCI on msm8994-based devices. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-6-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 88975f5eeb8b..2f394ebbdbb2 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -238,6 +238,29 @@ }; }; + sdhc1: sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; + }; + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; -- cgit v1.2.3 From d3d071a0e5bc829803ca6124e80d7649079dabab Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:06 +0200 Subject: arm64: dts: qcom: msm8994: Add I2C, SPI and BLSP DMA nodes Add support for I2C and SPI buses to enable peripherals such as touchscreens or sensors. Also add DMA nodes, configuration and BLSP2 UART2 interface. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-8-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 156 +++++++++++++++++++++++++++++++++- 1 file changed, 155 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 2f394ebbdbb2..8aee7f1317e7 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -261,14 +261,168 @@ status = "disabled"; }; + blsp1_dma: dma@f9904000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9904000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = ; - status = "disabled"; clock-names = "core", "iface"; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c1: i2c@f9923000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi0: spi@f9923000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + spi-max-frequency = <19200000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi0_default>; + pinctrl-1 = <&blsp1_spi0_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* I2C3 doesn't exist */ + + blsp_i2c4: i2c@f9926000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9926000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + /* According to downstream kernels, i2c6 + * comes before i2c5 address-wise... + */ + + blsp_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 2>, <&blsp2_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; gcc: clock-controller@fc400000 { -- cgit v1.2.3 From a1026ca24262f3a934c1ca4b299f04e7d02b3149 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:07 +0200 Subject: arm64: dts: qcom: msm8994: Add pmu node Add the CPU PMU to get perf support for hardware events. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-9-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 8aee7f1317e7..25b1562c4656 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -148,6 +148,11 @@ reg = <0 0 0 0>; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From c21e7c067989bcbe52c8cf7c81cfc4182c06f298 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:08 +0200 Subject: arm64: dts: qcom: msm8994: Add PSCI node Add PSCI node to enable multi-processor startup. Note that not every 8994 device firmware supports PSCI, and even if, then it can only start the cores and not shut them down. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-10-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 25b1562c4656..1d1ae6f9ba1b 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -153,6 +153,11 @@ interrupts = ; }; + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From 732c94def0460d31f87d145d96db25f05273719e Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 00:48:09 +0200 Subject: arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id Add properties required for the bootloader to select the correct bootloader blob. They have been removed from the SoC device tree as they should be set on a per-device basis. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200623224813.297077-11-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index a5f9a6ab512c..baa55643b40f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -11,6 +11,8 @@ model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; /* required for bootloader to select correct board */ + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; qcom,board-id = <8026 0>; aliases { -- cgit v1.2.3 From 5e09bc51d07b31922b4f6156f3058a9e743c68de Mon Sep 17 00:00:00 2001 From: Sivaprakash Murugesan Date: Mon, 8 Jun 2020 19:41:19 +0530 Subject: arm64: dts: ipq8074: enable USB support IPQ8074 has two super speed usb ports, add phy and dwc3 nodes to enable them. Signed-off-by: Sivaprakash Murugesan Link: https://lore.kernel.org/r/1591625479-4483-6-git-send-email-sivaprak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 24 +++++ arch/arm64/boot/dts/qcom/ipq8074.dtsi | 167 ++++++++++++++++++++++++++++++ 2 files changed, 191 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 390e8d289961..f4a76162ab5f 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -86,3 +86,27 @@ &sdhc_1 { status = "ok"; }; + +&qusb_phy_0 { + status = "ok"; +}; + +&qusb_phy_1 { + status = "ok"; +}; + +&ssphy_0 { + status = "ok"; +}; + +&ssphy_1 { + status = "ok"; +}; + +&usb_0 { + status = "ok"; +}; + +&usb_1 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index ba13b7b62059..96a5ec89b5f0 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -82,6 +82,91 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + ssphy_1: phy@58000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00058000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB1_AUX_CLK>, + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB1_PHY_BCR>, + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb1_ssphy: lane@58200 { + reg = <0x00058200 0x130>, /* Tx */ + <0x00058400 0x200>, /* Rx */ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; + }; + }; + + qusb_phy_1: phy@59000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00059000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: phy@78000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00078000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x00078200 0x130>, /* Tx */ + <0x00078400 0x200>, /* Rx */ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: phy@79000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00079000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + }; + pcie_phy0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x00086000 0x1000>; @@ -316,6 +401,88 @@ status = "disabled"; }; + usb_0: usb@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + interrupts = ; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + + usb_1: usb@8cf8800 { + compatible = "qcom,dwc3"; + reg = <0x08cf8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: dwc3@8c00000 { + compatible = "snps,dwc3"; + reg = <0x8c00000 0xcd00>; + interrupts = ; + phys = <&qusb_phy_1>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; -- cgit v1.2.3 From e867f429e670bf3bf2a7fb2ddcc50fb8fc4b6898 Mon Sep 17 00:00:00 2001 From: Akash Asthana Date: Tue, 23 Jun 2020 16:08:57 +0530 Subject: arm64: dts: sc7180: Add interconnect for QUP and QSPI Add interconnect ports for GENI QUPs and QSPI to set bus capabilities. Signed-off-by: Akash Asthana Link: https://lore.kernel.org/r/1592908737-7068-9-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 127 +++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 3a8076c8bdbf..ad57df278a79 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -547,6 +547,8 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -559,6 +561,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -572,6 +579,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -583,6 +593,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -596,6 +609,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -609,6 +627,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -620,6 +641,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -633,6 +657,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -644,6 +673,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -657,6 +689,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -670,6 +707,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -681,6 +721,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -694,6 +737,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -705,6 +753,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -718,6 +769,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -731,6 +787,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -742,6 +801,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -756,6 +818,8 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnect-names = "qup-core"; status = "disabled"; i2c6: i2c@a80000 { @@ -768,6 +832,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -781,6 +850,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -792,6 +864,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -805,6 +880,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -816,6 +896,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -829,6 +912,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -842,6 +930,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -853,6 +944,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -866,6 +960,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -877,6 +976,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -890,6 +992,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -903,6 +1010,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -914,6 +1024,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -927,6 +1040,11 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -940,6 +1058,9 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -951,6 +1072,9 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = ; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -2132,6 +2256,9 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC + &config_noc SLAVE_QSPI_0>; + interconnect-names = "qspi-config"; status = "disabled"; }; -- cgit v1.2.3 From afd92390fcaa784a6d064f3b07c8d8124e43e5d1 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:09:36 +0200 Subject: ARM: tegra: Drop display controller parent clocks on Tegra124 The parent clocks are determined by the output that will be used, not by the display controller that drives the output. On previous generations a simple RGB output used to be part of the display controller and hence an explicit parent clock needed to be assigned to the display controller to drive the RGB output. Starting with Tegra124, that RGB output has been dropped and the parent clock can therefore be removed from the display controller device tree nodes. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1afed8496c95..2c992e8e3594 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -105,9 +105,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_DISP1>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP1>; + clock-names = "dc"; resets = <&tegra_car 27>; reset-names = "dc"; @@ -120,9 +119,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_DISP2>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP2>; + clock-names = "dc"; resets = <&tegra_car 26>; reset-names = "dc"; -- cgit v1.2.3 From 32c096c2276acd191f8db5b1a45b3dee9502258a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:21:17 +0200 Subject: ARM: tegra: Rename sdhci nodes to mmc The new json-schema based validation tools require SD/MMC controller nodes to be named mmc. Rename all references to them. Cc: Marcel Ziswiler Cc: Philippe Schenker Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114-dalmore.dts | 4 ++-- arch/arm/boot/dts/tegra114-roth.dts | 4 ++-- arch/arm/boot/dts/tegra114-tn7.dts | 2 +- arch/arm/boot/dts/tegra114.dtsi | 8 ++++---- arch/arm/boot/dts/tegra124-apalis-eval.dts | 4 ++-- arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 4 ++-- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +- arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 4 ++-- arch/arm/boot/dts/tegra124-nyan-big.dts | 2 +- arch/arm/boot/dts/tegra124-nyan.dtsi | 6 +++--- arch/arm/boot/dts/tegra124-venice2.dts | 4 ++-- arch/arm/boot/dts/tegra124.dtsi | 8 ++++---- arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +- arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +- arch/arm/boot/dts/tegra20-harmony.dts | 4 ++-- arch/arm/boot/dts/tegra20-paz00.dts | 4 ++-- arch/arm/boot/dts/tegra20-seaboard.dts | 6 +++--- arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +- arch/arm/boot/dts/tegra20-trimslice.dts | 4 ++-- arch/arm/boot/dts/tegra20-ventana.dts | 6 +++--- arch/arm/boot/dts/tegra20.dtsi | 8 ++++---- arch/arm/boot/dts/tegra30-apalis-eval.dts | 4 ++-- arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 4 ++-- arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 2 +- arch/arm/boot/dts/tegra30-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra30-beaver.dts | 4 ++-- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 2 +- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 2 +- arch/arm/boot/dts/tegra30-cardhu.dtsi | 4 ++-- arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +- arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +- arch/arm/boot/dts/tegra30.dtsi | 8 ++++---- 33 files changed, 64 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 584db54cd750..c04162ddec3c 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1108,14 +1108,14 @@ }; }; - sdhci@78000400 { + mmc@78000400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; - sdhci@78000600 { + mmc@78000600 { bus-width = <8>; status = "okay"; non-removable; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 7378b5d6f2fa..07960171fabe 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -962,7 +962,7 @@ }; /* SD card */ - sdhci@78000400 { + mmc@78000400 { status = "okay"; bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; @@ -971,7 +971,7 @@ }; /* eMMC */ - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 0e520ae1109d..745d234b105b 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -242,7 +242,7 @@ }; /* eMMC */ - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index a06b88b01ef3..f511abf3fc81 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -646,7 +646,7 @@ #nvidia,mipi-calibrate-cells = <1>; }; - sdhci@78000000 { + mmc@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; interrupts = ; @@ -657,7 +657,7 @@ status = "disabled"; }; - sdhci@78000200 { + mmc@78000200 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; interrupts = ; @@ -668,7 +668,7 @@ status = "disabled"; }; - sdhci@78000400 { + mmc@78000400 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; interrupts = ; @@ -679,7 +679,7 @@ status = "disabled"; }; - sdhci@78000600 { + mmc@78000600 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; interrupts = ; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index ceb3f6388c7d..28c29b6813a7 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -130,7 +130,7 @@ }; /* Apalis MMC1 */ - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; /* MMC1_CD# */ @@ -139,7 +139,7 @@ }; /* Apalis SD1 */ - sdhci@700b0400 { + mmc@700b0400 { status = "okay"; bus-width = <4>; /* SD1_CD# */ diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts index 826b776fbe6f..f3afde410615 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts @@ -132,7 +132,7 @@ }; /* Apalis MMC1 */ - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; /* MMC1_CD# */ @@ -141,7 +141,7 @@ }; /* Apalis SD1 */ - sdhci@700b0400 { + mmc@700b0400 { status = "okay"; bus-width = <4>; /* SD1_CD# */ diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index de499f736bda..31354c4d7739 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1916,7 +1916,7 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index d70a86da4ee4..91f389aa9c7f 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1908,7 +1908,7 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index d2adb510c558..3d0f6cc4b18a 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1804,7 +1804,7 @@ }; /* SD card */ - sdhci@700b0400 { + mmc@700b0400 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -1814,7 +1814,7 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index d97791b98958..4d14dec21af6 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -20,7 +20,7 @@ ddc-i2c-bus = <&dpaux>; }; - sdhci@700b0400 { /* SD Card on this bus */ + mmc@700b0400 { /* SD Card on this bus */ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index cd43863cd98b..06e133ad9932 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -495,7 +495,7 @@ reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - sdhci@700b0000 { /* WiFi/BT on this bus */ + mmc@700b0000 { /* WiFi/BT on this bus */ status = "okay"; bus-width = <4>; no-1-8-v; @@ -506,7 +506,7 @@ keep-power-in-suspend; }; - sdhci@700b0400 { /* SD Card on this bus */ + mmc@700b0400 { /* SD Card on this bus */ status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -515,7 +515,7 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@700b0600 { /* eMMC on this bus */ + mmc@700b0600 { /* eMMC on this bus */ status = "okay"; bus-width = <8>; no-1-8-v; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index a2457c6cc6ee..56f051b9a538 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1002,7 +1002,7 @@ }; }; - sdhci@700b0400 { + mmc@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; @@ -1011,7 +1011,7 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 2c992e8e3594..76c1ef923213 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -833,7 +833,7 @@ }; }; - sdhci@700b0000 { + mmc@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = ; @@ -843,7 +843,7 @@ status = "disabled"; }; - sdhci@700b0200 { + mmc@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = ; @@ -853,7 +853,7 @@ status = "disabled"; }; - sdhci@700b0400 { + mmc@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = ; @@ -863,7 +863,7 @@ status = "disabled"; }; - sdhci@700b0600 { + mmc@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = ; diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts index 37ad508b61d9..a05fb3853da8 100644 --- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts @@ -183,7 +183,7 @@ }; /* SD/MMC */ - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts index af4740847769..425494b9ed54 100644 --- a/arch/arm/boot/dts/tegra20-colibri-iris.dts +++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts @@ -171,7 +171,7 @@ }; /* SD/MMC */ - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index b051d75d4642..86494cb4d5a1 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -613,7 +613,7 @@ status = "okay"; }; - sdhci@c8000200 { + mmc@c8000200 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; @@ -621,7 +621,7 @@ bus-width = <4>; }; - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 2a0e5754f50f..91b6bb82e960 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -543,7 +543,7 @@ status = "okay"; }; - sdhci@c8000000 { + mmc@c8000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; @@ -551,7 +551,7 @@ bus-width = <4>; }; - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 9a1ab4bd43e0..f1baf16c5010 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -760,14 +760,14 @@ status = "okay"; }; - sdhci@c8000000 { + mmc@c8000000 { status = "okay"; power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; - sdhci@c8000400 { + mmc@c8000400 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; @@ -775,7 +775,7 @@ bus-width = <4>; }; - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 9b02b428c497..95e6bccdb4f6 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -495,7 +495,7 @@ status = "okay"; }; - sdhci@c8000600 { + mmc@c8000600 { cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 0c65a658be70..4bc87bc0c2a4 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -366,13 +366,13 @@ status = "okay"; }; - sdhci@c8000000 { + mmc@c8000000 { status = "okay"; broken-cd; bus-width = <4>; }; - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index ccc24674be03..b158771ac0b7 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -554,14 +554,14 @@ status = "okay"; }; - sdhci@c8000000 { + mmc@c8000000 { status = "okay"; power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; bus-width = <4>; keep-power-in-suspend; }; - sdhci@c8000400 { + mmc@c8000400 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; @@ -569,7 +569,7 @@ bus-width = <4>; }; - sdhci@c8000600 { + mmc@c8000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f0a172c61b26..be8299ce82d0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -807,7 +807,7 @@ status = "disabled"; }; - sdhci@c8000000 { + mmc@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = ; @@ -817,7 +817,7 @@ status = "disabled"; }; - sdhci@c8000200 { + mmc@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = ; @@ -827,7 +827,7 @@ status = "disabled"; }; - sdhci@c8000400 { + mmc@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = ; @@ -837,7 +837,7 @@ status = "disabled"; }; - sdhci@c8000600 { + mmc@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = ; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index b39c26806bf2..9f653ef41da4 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -120,7 +120,7 @@ }; /* Apalis SD1 */ - sdhci@78000000 { + mmc@78000000 { status = "okay"; bus-width = <4>; /* SD1_CD# */ @@ -129,7 +129,7 @@ }; /* Apalis MMC1 */ - sdhci@78000400 { + mmc@78000400 { status = "okay"; bus-width = <8>; /* MMC1_CD# */ diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts index e29dca92ba0a..dc633e529822 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts @@ -121,7 +121,7 @@ }; /* Apalis SD1 */ - sdhci@78000000 { + mmc@78000000 { status = "okay"; bus-width = <4>; /* SD1_CD# */ @@ -130,7 +130,7 @@ }; /* Apalis MMC1 */ - sdhci@78000400 { + mmc@78000400 { status = "okay"; bus-width = <8>; /* MMC1_CD# */ diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 387b17458e22..9421063cd86c 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -1112,7 +1112,7 @@ }; /* eMMC */ - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 6648506f3aa4..d13f6b0c7c0c 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1094,7 +1094,7 @@ }; /* eMMC */ - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 3211c61f956c..e0624b74fb50 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1922,7 +1922,7 @@ }; }; - sdhci@78000000 { + mmc@78000000 { status = "okay"; vqmmc-supply = <&ldo5_reg>; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -1931,7 +1931,7 @@ bus-width = <4>; }; - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index 09e57c5f698d..4899e05a0d9c 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -9,7 +9,7 @@ model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; - sdhci@78000400 { + mmc@78000400 { status = "okay"; power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index c9ad4e566407..c1c0ca628af1 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -11,7 +11,7 @@ model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; - sdhci@78000400 { + mmc@78000400 { status = "okay"; power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; bus-width = <4>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index c8dc3b6ab2f6..dab9989fa760 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -384,7 +384,7 @@ }; }; - sdhci@78000000 { + mmc@78000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>; @@ -392,7 +392,7 @@ bus-width = <4>; }; - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 8e106e784dce..7d4a6ca4936a 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -98,7 +98,7 @@ }; /* SD/MMC */ - sdhci@78000200 { + mmc@78000200 { status = "okay"; bus-width = <4>; cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index adba554381c7..a7bfe26f038d 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -933,7 +933,7 @@ }; /* eMMC */ - sdhci@78000600 { + mmc@78000600 { status = "okay"; bus-width = <8>; non-removable; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 27000f0ba35b..4780ae3b000e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -853,7 +853,7 @@ }; }; - sdhci@78000000 { + mmc@78000000 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = ; @@ -863,7 +863,7 @@ status = "disabled"; }; - sdhci@78000200 { + mmc@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = ; @@ -873,7 +873,7 @@ status = "disabled"; }; - sdhci@78000400 { + mmc@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = ; @@ -883,7 +883,7 @@ status = "disabled"; }; - sdhci@78000600 { + mmc@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = ; -- cgit v1.2.3 From 704818a1ac1b6d8bdd8259d7ac60811ee708b9f0 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:25:54 +0200 Subject: ARM: tegra: Tegra114 SDHCI is not backwards-compatible The SDHCI controller instantiated on Tegra114 is not backwards- compatible with the version on Tegra30, so remove the corresponding compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index f511abf3fc81..5cfcbb2f6935 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -647,7 +647,7 @@ }; mmc@78000000 { - compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra114-sdhci"; reg = <0x78000000 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC1>; @@ -658,7 +658,7 @@ }; mmc@78000200 { - compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra114-sdhci"; reg = <0x78000200 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC2>; @@ -669,7 +669,7 @@ }; mmc@78000400 { - compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra114-sdhci"; reg = <0x78000400 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC3>; @@ -680,7 +680,7 @@ }; mmc@78000600 { - compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; + compatible = "nvidia,tegra114-sdhci"; reg = <0x78000600 0x200>; interrupts = ; clocks = <&tegra_car TEGRA114_CLK_SDMMC4>; -- cgit v1.2.3 From 4c0bb8caad384da3b598ee2dfe8f8823ccfc3cae Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:28:34 +0200 Subject: ARM: tegra: Add missing #phy-cells property to USB PHYs USB PHYs must have a #phy-cells property, so add one to the Tegra USB PHYs which don't have one. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 2 ++ arch/arm/boot/dts/tegra124.dtsi | 3 +++ arch/arm/boot/dts/tegra20.dtsi | 3 +++ arch/arm/boot/dts/tegra30.dtsi | 3 +++ 4 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 5cfcbb2f6935..708ad36835a1 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -712,6 +712,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -748,6 +749,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 76c1ef923213..f00e962c8f55 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1056,6 +1056,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1093,6 +1094,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1129,6 +1131,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index be8299ce82d0..91219eeb2146 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -737,6 +737,7 @@ clock-names = "reg", "pll_u", "timer", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,has-legacy-mode; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; @@ -771,6 +772,7 @@ clock-names = "reg", "pll_u", "ulpi-link"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; status = "disabled"; }; @@ -797,6 +799,7 @@ clock-names = "reg", "pll_u", "timer", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 4780ae3b000e..c3dbf80c0e03 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -916,6 +916,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -953,6 +954,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -989,6 +991,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; -- cgit v1.2.3 From 1bc5af2b364f746e1d3d5ba6f49f30fc54b807b3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:31:33 +0200 Subject: ARM: tegra: Add missing #sound-dai-cells property to codecs Audio codecs need a #sound-dai-cells property, so add one to the audio codecs on various Tegra-based boards that don't have one. Cc: Marcel Ziswiler Cc: Philippe Schenker Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 1 + arch/arm/boot/dts/tegra124-apalis.dtsi | 1 + arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 1 + arch/arm/boot/dts/tegra30-apalis.dtsi | 1 + arch/arm/boot/dts/tegra30-colibri.dtsi | 1 + 5 files changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 31354c4d7739..12f0a28f05d0 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -1562,6 +1562,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDD-supply = <®_1v8_vddio>; VDDIO-supply = <®_1v8_vddio>; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 91f389aa9c7f..8871dff4599c 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -1555,6 +1555,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDD-supply = <®_1v8_vddio>; VDDIO-supply = <®_1v8_vddio>; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 9421063cd86c..fdd3e4e3522b 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -855,6 +855,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDD-supply = <®_1v8_vio>; VDDIO-supply = <®_module_3v3>; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index d13f6b0c7c0c..90694d1a3b0c 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -846,6 +846,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDD-supply = <®_1v8_vio>; VDDIO-supply = <®_module_3v3>; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index a7bfe26f038d..933087ee45a8 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -723,6 +723,7 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_module_3v3_audio>; VDDD-supply = <®_1v8_vio>; VDDIO-supply = <®_module_3v3>; -- cgit v1.2.3 From cc761754f463bcb050ed06040c98e42712bce316 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:36:25 +0200 Subject: ARM: tegra: Use standard name for Ethernet devices Ethernet device should be named "ethernet@". Cc: Marcel Ziswiler Cc: Philippe Schenker Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +- arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +- arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 2 +- arch/arm/boot/dts/tegra30-apalis.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 12f0a28f05d0..1e30fa405fa0 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -40,7 +40,7 @@ phy-names = "pcie-0"; status = "okay"; - pcie@0 { + ethernet@0,0 { reg = <0 0 0 0 0>; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 8871dff4599c..608896f8dd52 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -39,7 +39,7 @@ phy-names = "pcie-0"; status = "okay"; - pcie@0 { + ethernet@0,0 { reg = <0 0 0 0 0>; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index fdd3e4e3522b..6a3a72f81c44 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -37,7 +37,7 @@ status = "okay"; nvidia,num-lanes = <1>; - pcie@0 { + ethernet@0,0 { reg = <0 0 0 0 0>; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 90694d1a3b0c..6544ce70b46f 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -36,7 +36,7 @@ status = "okay"; nvidia,num-lanes = <1>; - pcie@0 { + ethernet@0,0 { reg = <0 0 0 0 0>; local-mac-address = [00 00 00 00 00 00]; }; -- cgit v1.2.3 From 9482a17008fa98a7a8807ce6a91b8765d75ada68 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:41:30 +0200 Subject: ARM: tegra: Use proper tuple notation Tuple boundaries should be marked by < and > to make it clear which cells are part of the same tuple. This also helps the json-schema based validation tooling to properly parse this data. While at it, also remove the "immovable" bit from PCI addresses. All of these addresses are in fact "movable". Cc: Marcel Ziswiler Cc: Philippe Schenker Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra114.dtsi | 14 +++--- arch/arm/boot/dts/tegra124.dtsi | 20 ++++---- arch/arm/boot/dts/tegra20.dtsi | 64 ++++++++++++------------ arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 4 +- arch/arm/boot/dts/tegra30.dtsi | 69 ++++++++++++++------------ 5 files changed, 89 insertions(+), 82 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 708ad36835a1..fb99b3e971c3 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -255,14 +255,14 @@ apbmisc@70000800 { compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; - reg = <0x70000800 0x64 /* Chip revision */ - 0x70000008 0x04>; /* Strapping options */ + reg = <0x70000800 0x64>, /* Chip revision */ + <0x70000008 0x04>; /* Strapping options */ }; pinmux: pinmux@70000868 { compatible = "nvidia,tegra114-pinmux"; - reg = <0x70000868 0x148 /* Pad control registers */ - 0x70003000 0x40c>; /* Mux registers */ + reg = <0x70000868 0x148>, /* Pad control registers */ + <0x70003000 0x40c>; /* Mux registers */ }; /* @@ -704,7 +704,8 @@ phy1: usb-phy@7d000000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; - reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + reg = <0x7d000000 0x4000>, + <0x7d000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USBD>, <&tegra_car TEGRA114_CLK_PLL_U>, @@ -741,7 +742,8 @@ phy3: usb-phy@7d008000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; - reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + reg = <0x7d008000 0x4000>, + <0x7d000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA114_CLK_USB3>, <&tegra_car TEGRA114_CLK_PLL_U>, diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index f00e962c8f55..9e8d125e2746 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -22,9 +22,9 @@ pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = , /* controller interrupt */ ; /* MSI interrupt */ @@ -38,11 +38,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA124_CLK_PCIE>, <&tegra_car TEGRA124_CLK_AFI>, @@ -885,8 +885,8 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ + <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 91219eeb2146..7a6ccbcfd80f 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -174,8 +174,8 @@ intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; - reg = <0x50041000 0x1000 - 0x50040100 0x0100>; + reg = <0x50041000 0x1000>, + <0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&intc>; @@ -274,15 +274,15 @@ vde@6001a000 { compatible = "nvidia,tegra20-vde"; - reg = <0x6001a000 0x1000 /* Syntax Engine */ - 0x6001b000 0x1000 /* Video Bitstream Engine */ - 0x6001c000 0x100 /* Macroblock Engine */ - 0x6001c200 0x100 /* Post-processing Engine */ - 0x6001c400 0x100 /* Motion Compensation Engine */ - 0x6001c600 0x100 /* Transform Engine */ - 0x6001c800 0x100 /* Pixel prediction block */ - 0x6001ca00 0x100 /* Video DMA */ - 0x6001d800 0x300>; /* Video frame controls */ + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x300>; /* Video frame controls */ reg-names = "sxe", "bsev", "mbe", "ppe", "mce", "tfe", "ppb", "vdma", "frameid"; iram = <&vde_pool>; /* IRAM region */ @@ -297,16 +297,16 @@ apbmisc@70000800 { compatible = "nvidia,tegra20-apbmisc"; - reg = <0x70000800 0x64 /* Chip revision */ - 0x70000008 0x04>; /* Strapping options */ + reg = <0x70000800 0x64>, /* Chip revision */ + <0x70000008 0x04>; /* Strapping options */ }; pinmux: pinmux@70000014 { compatible = "nvidia,tegra20-pinmux"; - reg = <0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8>; /* Pad control registers */ + reg = <0x70000014 0x10>, /* Tri-state registers */ + <0x70000080 0x20>, /* Mux registers */ + <0x700000a0 0x14>, /* Pull-up/down registers */ + <0x70000868 0xa8>; /* Pad control registers */ }; das@70000c00 { @@ -621,8 +621,8 @@ mc: memory-controller@7000f000 { compatible = "nvidia,tegra20-mc-gart"; - reg = <0x7000f000 0x400 /* controller registers */ - 0x58000000 0x02000000>; /* GART aperture */ + reg = <0x7000f000 0x00000400>, /* controller registers */ + <0x58000000 0x02000000>; /* GART aperture */ clocks = <&tegra_car TEGRA20_CLK_MC>; clock-names = "mc"; interrupts = ; @@ -651,12 +651,12 @@ pcie@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; - reg = <0x80003000 0x00000800 /* PADS registers */ - 0x80003800 0x00000200 /* AFI registers */ - 0x90000000 0x10000000>; /* configuration space */ + reg = <0x80003000 0x00000800>, /* PADS registers */ + <0x80003800 0x00000200>, /* AFI registers */ + <0x90000000 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; - interrupts = ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -667,11 +667,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */ - 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */ - 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */ - 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */ + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>, /* port 0 registers */ + <0x02000000 0 0x80001000 0x80001000 0 0x00001000>, /* port 1 registers */ + <0x01000000 0 0 0x82000000 0 0x00010000>, /* downstream I/O */ + <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>, /* non-prefetchable memory */ + <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */ clocks = <&tegra_car TEGRA20_CLK_PEX>, <&tegra_car TEGRA20_CLK_AFI>, @@ -728,7 +728,8 @@ phy1: usb-phy@c5000000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000000 0x4000 0xc5000000 0x4000>; + reg = <0xc5000000 0x4000>, + <0xc5000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USBD>, <&tegra_car TEGRA20_CLK_PLL_U>, @@ -790,7 +791,8 @@ phy3: usb-phy@c5008000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008000 0x4000 0xc5000000 0x4000>; + reg = <0xc5008000 0x4000>, + <0xc5000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA20_CLK_USB3>, <&tegra_car TEGRA20_CLK_PLL_U>, diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts index dc633e529822..86e138e8c7f0 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts @@ -248,8 +248,8 @@ regulator-max-microvolt = <3300000>; regulator-type = "voltage"; gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>; - states = <1800000 0x0 - 3300000 0x1>; + states = <1800000 0x0>, + <3300000 0x1>; startup-delay-us = <100000>; vin-supply = <&vddio_sdmmc_1v8_reg>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index c3dbf80c0e03..a3ea45c43bdf 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -20,12 +20,12 @@ pcie@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; - reg = <0x00003000 0x00000800 /* PADS registers */ - 0x00003800 0x00000200 /* AFI registers */ - 0x10000000 0x10000000>; /* configuration space */ + reg = <0x00003000 0x00000800>, /* PADS registers */ + <0x00003800 0x00000200>, /* AFI registers */ + <0x10000000 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; - interrupts = ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -36,12 +36,12 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */ - 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */ - 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */ - 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ + ranges = <0x02000000 0 0x00000000 0x00000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x00001000 0x00001000 0 0x00001000>, /* port 1 configuration space */ + <0x02000000 0 0x00004000 0x00004000 0 0x00001000>, /* port 2 configuration space */ + <0x01000000 0 0 0x02000000 0 0x00010000>, /* downstream I/O */ + <0x02000000 0 0x20000000 0x20000000 0 0x08000000>, /* non-prefetchable memory */ + <0x42000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */ clocks = <&tegra_car TEGRA30_CLK_PCIE>, <&tegra_car TEGRA30_CLK_AFI>, @@ -185,8 +185,8 @@ gr3d@54180000 { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; - clocks = <&tegra_car TEGRA30_CLK_GR3D - &tegra_car TEGRA30_CLK_GR3D2>; + clocks = <&tegra_car TEGRA30_CLK_GR3D>, + <&tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; resets = <&tegra_car 24>, <&tegra_car 98>; @@ -275,8 +275,8 @@ intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; - reg = <0x50041000 0x1000 - 0x50040100 0x0100>; + reg = <0x50041000 0x1000>, + <0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; interrupt-parent = <&intc>; @@ -406,15 +406,15 @@ vde@6001a000 { compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde"; - reg = <0x6001a000 0x1000 /* Syntax Engine */ - 0x6001b000 0x1000 /* Video Bitstream Engine */ - 0x6001c000 0x100 /* Macroblock Engine */ - 0x6001c200 0x100 /* Post-processing Engine */ - 0x6001c400 0x100 /* Motion Compensation Engine */ - 0x6001c600 0x100 /* Transform Engine */ - 0x6001c800 0x100 /* Pixel prediction block */ - 0x6001ca00 0x100 /* Video DMA */ - 0x6001d800 0x400>; /* Video frame controls */ + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x400>; /* Video frame controls */ reg-names = "sxe", "bsev", "mbe", "ppe", "mce", "tfe", "ppb", "vdma", "frameid"; iram = <&vde_pool>; /* IRAM region */ @@ -430,14 +430,14 @@ apbmisc@70000800 { compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"; - reg = <0x70000800 0x64 /* Chip revision */ - 0x70000008 0x04>; /* Strapping options */ + reg = <0x70000800 0x64>, /* Chip revision */ + <0x70000008 0x04>; /* Strapping options */ }; pinmux: pinmux@70000868 { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd4 /* Pad control registers */ - 0x70003000 0x3e4>; /* Mux registers */ + reg = <0x70000868 0x0d4>, /* Pad control registers */ + <0x70003000 0x3e4>; /* Mux registers */ }; /* @@ -772,8 +772,8 @@ ahub@70080000 { compatible = "nvidia,tegra30-ahub"; - reg = <0x70080000 0x200 - 0x70080200 0x100>; + reg = <0x70080000 0x200>, + <0x70080200 0x100>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>, <&tegra_car TEGRA30_CLK_APBIF>; @@ -908,7 +908,8 @@ phy1: usb-phy@7d000000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d000000 0x4000 0x7d000000 0x4000>; + reg = <0x7d000000 0x4000>, + <0x7d000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USBD>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -946,7 +947,8 @@ phy2: usb-phy@7d004000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d004000 0x4000 0x7d000000 0x4000>; + reg = <0x7d004000 0x4000>, + <0x7d000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, @@ -983,7 +985,8 @@ phy3: usb-phy@7d008000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d008000 0x4000 0x7d000000 0x4000>; + reg = <0x7d008000 0x4000>, + <0x7d000000 0x4000>; phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB3>, <&tegra_car TEGRA30_CLK_PLL_U>, -- cgit v1.2.3 From 839d9bda2f3f67d37d7241bd7132936ead4a55a5 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:44:43 +0200 Subject: ARM: tegra: Add micro-USB A/B port on Jetson TK1 Run the micro-USB A/B port on Jetson TK1 in host mode by default. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 3d0f6cc4b18a..414cd1cafa7f 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1782,6 +1782,12 @@ }; ports { + /* Micro A/B */ + usb2-0 { + status = "okay"; + mode = "host"; + }; + /* Mini PCIe */ usb2-1 { status = "okay"; -- cgit v1.2.3 From 9061a80566e44809c8aecae8cb75f15adedd2c69 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:45:25 +0200 Subject: ARM: tegra: Add missing panel power supplies Both Nyan boards as well as Venice2 are missing panel power supplies. Add them. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-nyan-big.dts | 1 + arch/arm/boot/dts/tegra124-nyan-blaze.dts | 1 + arch/arm/boot/dts/tegra124-venice2.dts | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 4d14dec21af6..1d2aac2cb6d0 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -16,6 +16,7 @@ panel: panel { compatible = "auo,b133xtn01"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index 2a029ee86dd7..677babde6460 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -18,6 +18,7 @@ panel: panel { compatible = "samsung,ltn140at29-301"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 56f051b9a538..e6b54ac1ebd1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1081,7 +1081,7 @@ panel: panel { compatible = "lg,lp129qe"; - + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; -- cgit v1.2.3 From 571c3d37ee99aebcd4f33ec970633489960350bc Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:48:51 +0200 Subject: ARM: tegra: Add #reset-cells to Tegra124 memory controller The memory controller exposes a set of memory client resets and needs to specify the #reset-cells property in order to advertise the number of cells needed to describe each of the resets. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 9e8d125e2746..ea4cf054fb3b 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -622,6 +622,7 @@ interrupts = ; #iommu-cells = <1>; + #reset-cells = <1>; }; emc: external-memory-controller@7001b000 { -- cgit v1.2.3 From 5b66a2b43f19551c3c6b15594d21a24a13505403 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:50:22 +0200 Subject: ARM: tegra: Fix order of XUSB controller clocks This is purely to make the json-schema validation tools happy because they cannot deal with string arrays that may be in arbitrary order. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index ea4cf054fb3b..c03df6a3a9e0 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -680,8 +680,8 @@ <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, <&tegra_car TEGRA124_CLK_XUSB_SS>, - <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, <&tegra_car TEGRA124_CLK_PLL_U_480M>, @@ -689,7 +689,7 @@ <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", "xusb_ss", - "xusb_ss_div2", "xusb_ss_src", + "xusb_ss_src", "xusb_ss_div2", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; resets = <&tegra_car 89>, <&tegra_car 156>, -- cgit v1.2.3 From f538588bdbc8d1c4bc79311a5e7f84224ffcda7a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:52:07 +0200 Subject: ARM: tegra: Add missing clock-names for SDHCI controllers The Tegra SDHCI controllers need to have a clock-names property according to the bindings. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 4 ++++ arch/arm/boot/dts/tegra20.dtsi | 4 ++++ arch/arm/boot/dts/tegra30.dtsi | 4 ++++ 3 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index c03df6a3a9e0..782c00b8b355 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -839,6 +839,7 @@ reg = <0x0 0x700b0000 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_SDMMC1>; + clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; status = "disabled"; @@ -849,6 +850,7 @@ reg = <0x0 0x700b0200 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_SDMMC2>; + clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; status = "disabled"; @@ -859,6 +861,7 @@ reg = <0x0 0x700b0400 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_SDMMC3>; + clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; status = "disabled"; @@ -869,6 +872,7 @@ reg = <0x0 0x700b0600 0x0 0x200>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_SDMMC4>; + clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 7a6ccbcfd80f..e51d7618f9c9 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -817,6 +817,7 @@ reg = <0xc8000000 0x200>; interrupts = ; clocks = <&tegra_car TEGRA20_CLK_SDMMC1>; + clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; status = "disabled"; @@ -827,6 +828,7 @@ reg = <0xc8000200 0x200>; interrupts = ; clocks = <&tegra_car TEGRA20_CLK_SDMMC2>; + clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; status = "disabled"; @@ -837,6 +839,7 @@ reg = <0xc8000400 0x200>; interrupts = ; clocks = <&tegra_car TEGRA20_CLK_SDMMC3>; + clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; status = "disabled"; @@ -847,6 +850,7 @@ reg = <0xc8000600 0x200>; interrupts = ; clocks = <&tegra_car TEGRA20_CLK_SDMMC4>; + clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index a3ea45c43bdf..def18a86a36a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -858,6 +858,7 @@ reg = <0x78000000 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC1>; + clock-names = "sdhci"; resets = <&tegra_car 14>; reset-names = "sdhci"; status = "disabled"; @@ -868,6 +869,7 @@ reg = <0x78000200 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC2>; + clock-names = "sdhci"; resets = <&tegra_car 9>; reset-names = "sdhci"; status = "disabled"; @@ -878,6 +880,7 @@ reg = <0x78000400 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; + clock-names = "sdhci"; resets = <&tegra_car 69>; reset-names = "sdhci"; status = "disabled"; @@ -888,6 +891,7 @@ reg = <0x78000600 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC4>; + clock-names = "sdhci"; resets = <&tegra_car 15>; reset-names = "sdhci"; status = "disabled"; -- cgit v1.2.3 From 417668bcb07eda2463fc39b6961b53a5fcd87a59 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:52:56 +0200 Subject: ARM: tegra: Use proper unit-addresses for OPPs Use commas rather than underscores to separate the various parts of the unit-address in CPU OPPs to make them properly validate under the json- schema bindings. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi | 98 +++--- arch/arm/boot/dts/tegra20-cpu-opp.dtsi | 98 +++--- arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi | 398 +++++++++++------------ arch/arm/boot/dts/tegra30-cpu-opp.dtsi | 398 +++++++++++------------ 4 files changed, 496 insertions(+), 496 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi index e85ffdbef876..dce85d39480d 100644 --- a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi +++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi @@ -2,199 +2,199 @@ / { cpu0_opp_table: cpu_opp_table0 { - opp@216000000_750 { + opp@216000000,750 { opp-microvolt = <750000 750000 1125000>; }; - opp@216000000_800 { + opp@216000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@312000000_750 { + opp@312000000,750 { opp-microvolt = <750000 750000 1125000>; }; - opp@312000000_800 { + opp@312000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@456000000_750 { + opp@456000000,750 { opp-microvolt = <750000 750000 1125000>; }; - opp@456000000_800 { + opp@456000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@456000000_800_2_2 { + opp@456000000,800,2,2 { opp-microvolt = <800000 800000 1125000>; }; - opp@456000000_800_3_2 { + opp@456000000,800,3,2 { opp-microvolt = <800000 800000 1125000>; }; - opp@456000000_825 { + opp@456000000,825 { opp-microvolt = <825000 825000 1125000>; }; - opp@608000000_750 { + opp@608000000,750 { opp-microvolt = <750000 750000 1125000>; }; - opp@608000000_800 { + opp@608000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@608000000_800_3_2 { + opp@608000000,800,3,2 { opp-microvolt = <800000 800000 1125000>; }; - opp@608000000_825 { + opp@608000000,825 { opp-microvolt = <825000 825000 1125000>; }; - opp@608000000_850 { + opp@608000000,850 { opp-microvolt = <850000 850000 1125000>; }; - opp@608000000_900 { + opp@608000000,900 { opp-microvolt = <900000 900000 1125000>; }; - opp@760000000_775 { + opp@760000000,775 { opp-microvolt = <775000 775000 1125000>; }; - opp@760000000_800 { + opp@760000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@760000000_850 { + opp@760000000,850 { opp-microvolt = <850000 850000 1125000>; }; - opp@760000000_875 { + opp@760000000,875 { opp-microvolt = <875000 875000 1125000>; }; - opp@760000000_875_1_1 { + opp@760000000,875,1,1 { opp-microvolt = <875000 875000 1125000>; }; - opp@760000000_875_0_2 { + opp@760000000,875,0,2 { opp-microvolt = <875000 875000 1125000>; }; - opp@760000000_875_1_2 { + opp@760000000,875,1,2 { opp-microvolt = <875000 875000 1125000>; }; - opp@760000000_900 { + opp@760000000,900 { opp-microvolt = <900000 900000 1125000>; }; - opp@760000000_975 { + opp@760000000,975 { opp-microvolt = <975000 975000 1125000>; }; - opp@816000000_800 { + opp@816000000,800 { opp-microvolt = <800000 800000 1125000>; }; - opp@816000000_850 { + opp@816000000,850 { opp-microvolt = <850000 850000 1125000>; }; - opp@816000000_875 { + opp@816000000,875 { opp-microvolt = <875000 875000 1125000>; }; - opp@816000000_950 { + opp@816000000,950 { opp-microvolt = <950000 950000 1125000>; }; - opp@816000000_1000 { + opp@816000000,1000 { opp-microvolt = <1000000 1000000 1125000>; }; - opp@912000000_850 { + opp@912000000,850 { opp-microvolt = <850000 850000 1125000>; }; - opp@912000000_900 { + opp@912000000,900 { opp-microvolt = <900000 900000 1125000>; }; - opp@912000000_925 { + opp@912000000,925 { opp-microvolt = <925000 925000 1125000>; }; - opp@912000000_950 { + opp@912000000,950 { opp-microvolt = <950000 950000 1125000>; }; - opp@912000000_950_0_2 { + opp@912000000,950,0,2 { opp-microvolt = <950000 950000 1125000>; }; - opp@912000000_950_2_2 { + opp@912000000,950,2,2 { opp-microvolt = <950000 950000 1125000>; }; - opp@912000000_1000 { + opp@912000000,1000 { opp-microvolt = <1000000 1000000 1125000>; }; - opp@912000000_1050 { + opp@912000000,1050 { opp-microvolt = <1050000 1050000 1125000>; }; - opp@1000000000_875 { + opp@1000000000,875 { opp-microvolt = <875000 875000 1125000>; }; - opp@1000000000_900 { + opp@1000000000,900 { opp-microvolt = <900000 900000 1125000>; }; - opp@1000000000_950 { + opp@1000000000,950 { opp-microvolt = <950000 950000 1125000>; }; - opp@1000000000_975 { + opp@1000000000,975 { opp-microvolt = <975000 975000 1125000>; }; - opp@1000000000_1000 { + opp@1000000000,1000 { opp-microvolt = <1000000 1000000 1125000>; }; - opp@1000000000_1000_0_2 { + opp@1000000000,1000,0,2 { opp-microvolt = <1000000 1000000 1125000>; }; - opp@1000000000_1025 { + opp@1000000000,1025 { opp-microvolt = <1025000 1025000 1125000>; }; - opp@1000000000_1100 { + opp@1000000000,1100 { opp-microvolt = <1100000 1100000 1125000>; }; - opp@1200000000_1000 { + opp@1200000000,1000 { opp-microvolt = <1000000 1000000 1125000>; }; - opp@1200000000_1050 { + opp@1200000000,1050 { opp-microvolt = <1050000 1050000 1125000>; }; - opp@1200000000_1100 { + opp@1200000000,1100 { opp-microvolt = <1100000 1100000 1125000>; }; - opp@1200000000_1125 { + opp@1200000000,1125 { opp-microvolt = <1125000 1125000 1125000>; }; }; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi index c878f4231791..9b8fedb57a1b 100644 --- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -5,295 +5,295 @@ compatible = "operating-points-v2"; opp-shared; - opp@216000000_750 { + opp@216000000,750 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0003>; opp-hz = /bits/ 64 <216000000>; }; - opp@216000000_800 { + opp@216000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0004>; opp-hz = /bits/ 64 <216000000>; }; - opp@312000000_750 { + opp@312000000,750 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0003>; opp-hz = /bits/ 64 <312000000>; }; - opp@312000000_800 { + opp@312000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0004>; opp-hz = /bits/ 64 <312000000>; }; - opp@456000000_750 { + opp@456000000,750 { clock-latency-ns = <400000>; opp-supported-hw = <0x0C 0x0003>; opp-hz = /bits/ 64 <456000000>; }; - opp@456000000_800 { + opp@456000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0006>; opp-hz = /bits/ 64 <456000000>; }; - opp@456000000_800_2_2 { + opp@456000000,800,2,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <456000000>; }; - opp@456000000_800_3_2 { + opp@456000000,800,3,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <456000000>; }; - opp@456000000_825 { + opp@456000000,825 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <456000000>; }; - opp@608000000_750 { + opp@608000000,750 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0003>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_800 { + opp@608000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0006>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_800_3_2 { + opp@608000000,800,3,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_825 { + opp@608000000,825 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_850 { + opp@608000000,850 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0006>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_900 { + opp@608000000,900 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <608000000>; }; - opp@760000000_775 { + opp@760000000,775 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0003>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_800 { + opp@760000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850 { + opp@760000000,850 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0006>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_875 { + opp@760000000,875 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_875_1_1 { + opp@760000000,875,1,1 { clock-latency-ns = <400000>; opp-supported-hw = <0x02 0x0002>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_875_0_2 { + opp@760000000,875,0,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_875_1_2 { + opp@760000000,875,1,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x02 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900 { + opp@760000000,900 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0002>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_975 { + opp@760000000,975 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <760000000>; }; - opp@816000000_800 { + opp@816000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0007>; opp-hz = /bits/ 64 <816000000>; }; - opp@816000000_850 { + opp@816000000,850 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <816000000>; }; - opp@816000000_875 { + opp@816000000,875 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0005>; opp-hz = /bits/ 64 <816000000>; }; - opp@816000000_950 { + opp@816000000,950 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0006>; opp-hz = /bits/ 64 <816000000>; }; - opp@816000000_1000 { + opp@816000000,1000 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <816000000>; }; - opp@912000000_850 { + opp@912000000,850 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0007>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_900 { + opp@912000000,900 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_925 { + opp@912000000,925 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_950 { + opp@912000000,950 { clock-latency-ns = <400000>; opp-supported-hw = <0x02 0x0006>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_950_0_2 { + opp@912000000,950,0,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0004>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_950_2_2 { + opp@912000000,950,2,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_1000 { + opp@912000000,1000 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0002>; opp-hz = /bits/ 64 <912000000>; }; - opp@912000000_1050 { + opp@912000000,1050 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <912000000>; }; - opp@1000000000_875 { + opp@1000000000,875 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0007>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_900 { + opp@1000000000,900 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_950 { + opp@1000000000,950 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975 { + opp@1000000000,975 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1000 { + opp@1000000000,1000 { clock-latency-ns = <400000>; opp-supported-hw = <0x02 0x0006>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1000_0_2 { + opp@1000000000,1000,0,2 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0004>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1025 { + opp@1000000000,1025 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0002>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1100 { + opp@1000000000,1100 { clock-latency-ns = <400000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1200000000_1000 { + opp@1200000000,1000 { clock-latency-ns = <400000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1050 { + opp@1200000000,1050 { clock-latency-ns = <400000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1100 { + opp@1200000000,1100 { clock-latency-ns = <400000>; opp-supported-hw = <0x02 0x0004>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1125 { + opp@1200000000,1125 { clock-latency-ns = <400000>; opp-supported-hw = <0x01 0x0004>; opp-hz = /bits/ 64 <1200000000>; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi index 5c40ef49894f..d682f7437146 100644 --- a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi +++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi @@ -2,799 +2,799 @@ / { cpu0_opp_table: cpu_opp_table0 { - opp@51000000_800 { + opp@51000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@51000000_850 { + opp@51000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@51000000_912 { + opp@51000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@102000000_800 { + opp@102000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@102000000_850 { + opp@102000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@102000000_912 { + opp@102000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@204000000_800 { + opp@204000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@204000000_850 { + opp@204000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@204000000_912 { + opp@204000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@312000000_850 { + opp@312000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@312000000_912 { + opp@312000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@340000000_800 { + opp@340000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@340000000_850 { + opp@340000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@370000000_800 { + opp@370000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@456000000_850 { + opp@456000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@456000000_912 { + opp@456000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@475000000_800 { + opp@475000000,800 { opp-microvolt = <800000 800000 1250000>; }; - opp@475000000_850 { + opp@475000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@475000000_850_0_1 { + opp@475000000,850,0,1 { opp-microvolt = <850000 850000 1250000>; }; - opp@475000000_850_0_4 { + opp@475000000,850,0,4 { opp-microvolt = <850000 850000 1250000>; }; - opp@475000000_850_0_7 { + opp@475000000,850,0,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@475000000_850_0_8 { + opp@475000000,850,0,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@608000000_850 { + opp@608000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@608000000_912 { + opp@608000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@620000000_850 { + opp@620000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850 { + opp@640000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_1_1 { + opp@640000000,850,1,1 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_2_1 { + opp@640000000,850,2,1 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_3_1 { + opp@640000000,850,3,1 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_1_4 { + opp@640000000,850,1,4 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_2_4 { + opp@640000000,850,2,4 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_3_4 { + opp@640000000,850,3,4 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_1_7 { + opp@640000000,850,1,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_2_7 { + opp@640000000,850,2,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_3_7 { + opp@640000000,850,3,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_4_7 { + opp@640000000,850,4,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_1_8 { + opp@640000000,850,1,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_2_8 { + opp@640000000,850,2,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_3_8 { + opp@640000000,850,3,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_850_4_8 { + opp@640000000,850,4,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@640000000_900 { + opp@640000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_850 { + opp@760000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_1 { + opp@760000000,850,3,1 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_2 { + opp@760000000,850,3,2 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_3 { + opp@760000000,850,3,3 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_4 { + opp@760000000,850,3,4 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_7 { + opp@760000000,850,3,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_4_7 { + opp@760000000,850,4,7 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_3_8 { + opp@760000000,850,3,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_4_8 { + opp@760000000,850,4,8 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_850_0_10 { + opp@760000000,850,0,10 { opp-microvolt = <850000 850000 1250000>; }; - opp@760000000_900 { + opp@760000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_1 { + opp@760000000,900,1,1 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_1 { + opp@760000000,900,2,1 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_2 { + opp@760000000,900,1,2 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_2 { + opp@760000000,900,2,2 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_3 { + opp@760000000,900,1,3 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_3 { + opp@760000000,900,2,3 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_4 { + opp@760000000,900,1,4 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_4 { + opp@760000000,900,2,4 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_7 { + opp@760000000,900,1,7 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_7 { + opp@760000000,900,2,7 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_1_8 { + opp@760000000,900,1,8 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_900_2_8 { + opp@760000000,900,2,8 { opp-microvolt = <900000 900000 1250000>; }; - opp@760000000_912 { + opp@760000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@760000000_975 { + opp@760000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@816000000_850 { + opp@816000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@816000000_912 { + opp@816000000,912 { opp-microvolt = <912000 912000 1250000>; }; - opp@860000000_850 { + opp@860000000,850 { opp-microvolt = <850000 850000 1250000>; }; - opp@860000000_900 { + opp@860000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_1 { + opp@860000000,900,2,1 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_1 { + opp@860000000,900,3,1 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_2 { + opp@860000000,900,2,2 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_2 { + opp@860000000,900,3,2 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_3 { + opp@860000000,900,2,3 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_3 { + opp@860000000,900,3,3 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_4 { + opp@860000000,900,2,4 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_4 { + opp@860000000,900,3,4 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_7 { + opp@860000000,900,2,7 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_7 { + opp@860000000,900,3,7 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_4_7 { + opp@860000000,900,4,7 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_2_8 { + opp@860000000,900,2,8 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_3_8 { + opp@860000000,900,3,8 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_900_4_8 { + opp@860000000,900,4,8 { opp-microvolt = <900000 900000 1250000>; }; - opp@860000000_975 { + opp@860000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_1 { + opp@860000000,975,1,1 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_2 { + opp@860000000,975,1,2 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_3 { + opp@860000000,975,1,3 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_4 { + opp@860000000,975,1,4 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_7 { + opp@860000000,975,1,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_975_1_8 { + opp@860000000,975,1,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@860000000_1000 { + opp@860000000,1000 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@910000000_900 { + opp@910000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@1000000000_900 { + opp@1000000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@1000000000_975 { + opp@1000000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_1 { + opp@1000000000,975,2,1 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_1 { + opp@1000000000,975,3,1 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_2 { + opp@1000000000,975,2,2 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_2 { + opp@1000000000,975,3,2 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_3 { + opp@1000000000,975,2,3 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_3 { + opp@1000000000,975,3,3 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_4 { + opp@1000000000,975,2,4 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_4 { + opp@1000000000,975,3,4 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_7 { + opp@1000000000,975,2,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_7 { + opp@1000000000,975,3,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_4_7 { + opp@1000000000,975,4,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_2_8 { + opp@1000000000,975,2,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_3_8 { + opp@1000000000,975,3,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_975_4_8 { + opp@1000000000,975,4,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@1000000000_1000 { + opp@1000000000,1000 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1000000000_1025 { + opp@1000000000,1025 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1100000000_900 { + opp@1100000000,900 { opp-microvolt = <900000 900000 1250000>; }; - opp@1100000000_975 { + opp@1100000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_1 { + opp@1100000000,975,3,1 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_2 { + opp@1100000000,975,3,2 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_3 { + opp@1100000000,975,3,3 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_4 { + opp@1100000000,975,3,4 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_7 { + opp@1100000000,975,3,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_4_7 { + opp@1100000000,975,4,7 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_3_8 { + opp@1100000000,975,3,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_975_4_8 { + opp@1100000000,975,4,8 { opp-microvolt = <975000 975000 1250000>; }; - opp@1100000000_1000 { + opp@1100000000,1000 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_1 { + opp@1100000000,1000,2,1 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_2 { + opp@1100000000,1000,2,2 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_3 { + opp@1100000000,1000,2,3 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_4 { + opp@1100000000,1000,2,4 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_7 { + opp@1100000000,1000,2,7 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1000_2_8 { + opp@1100000000,1000,2,8 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1100000000_1025 { + opp@1100000000,1025 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1100000000_1075 { + opp@1100000000,1075 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1150000000_975 { + opp@1150000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@1200000000_975 { + opp@1200000000,975 { opp-microvolt = <975000 975000 1250000>; }; - opp@1200000000_1000 { + opp@1200000000,1000 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_1 { + opp@1200000000,1000,3,1 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_2 { + opp@1200000000,1000,3,2 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_3 { + opp@1200000000,1000,3,3 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_4 { + opp@1200000000,1000,3,4 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_7 { + opp@1200000000,1000,3,7 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_4_7 { + opp@1200000000,1000,4,7 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_3_8 { + opp@1200000000,1000,3,8 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1000_4_8 { + opp@1200000000,1000,4,8 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1200000000_1025 { + opp@1200000000,1025 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_1 { + opp@1200000000,1025,2,1 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_2 { + opp@1200000000,1025,2,2 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_3 { + opp@1200000000,1025,2,3 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_4 { + opp@1200000000,1025,2,4 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_7 { + opp@1200000000,1025,2,7 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1025_2_8 { + opp@1200000000,1025,2,8 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1200000000_1050 { + opp@1200000000,1050 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1200000000_1075 { + opp@1200000000,1075 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1200000000_1100 { + opp@1200000000,1100 { opp-microvolt = <1100000 1100000 1250000>; }; - opp@1300000000_1000 { + opp@1300000000,1000 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1300000000_1000_4_7 { + opp@1300000000,1000,4,7 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1300000000_1000_4_8 { + opp@1300000000,1000,4,8 { opp-microvolt = <1000000 1000000 1250000>; }; - opp@1300000000_1025 { + opp@1300000000,1025 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1300000000_1025_3_1 { + opp@1300000000,1025,3,1 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1300000000_1025_3_7 { + opp@1300000000,1025,3,7 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1300000000_1025_3_8 { + opp@1300000000,1025,3,8 { opp-microvolt = <1025000 1025000 1250000>; }; - opp@1300000000_1050 { + opp@1300000000,1050 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_2_1 { + opp@1300000000,1050,2,1 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_2 { + opp@1300000000,1050,3,2 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_3 { + opp@1300000000,1050,3,3 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_4 { + opp@1300000000,1050,3,4 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_5 { + opp@1300000000,1050,3,5 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_6 { + opp@1300000000,1050,3,6 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_2_7 { + opp@1300000000,1050,2,7 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_2_8 { + opp@1300000000,1050,2,8 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_12 { + opp@1300000000,1050,3,12 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1050_3_13 { + opp@1300000000,1050,3,13 { opp-microvolt = <1050000 1050000 1250000>; }; - opp@1300000000_1075 { + opp@1300000000,1075 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1300000000_1075_2_2 { + opp@1300000000,1075,2,2 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1300000000_1075_2_3 { + opp@1300000000,1075,2,3 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1300000000_1075_2_4 { + opp@1300000000,1075,2,4 { opp-microvolt = <1075000 1075000 1250000>; }; - opp@1300000000_1100 { + opp@1300000000,1100 { opp-microvolt = <1100000 1100000 1250000>; }; - opp@1300000000_1125 { + opp@1300000000,1125 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1300000000_1150 { + opp@1300000000,1150 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1300000000_1175 { + opp@1300000000,1175 { opp-microvolt = <1175000 1175000 1250000>; }; - opp@1400000000_1100 { + opp@1400000000,1100 { opp-microvolt = <1100000 1100000 1250000>; }; - opp@1400000000_1125 { + opp@1400000000,1125 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1400000000_1150 { + opp@1400000000,1150 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1400000000_1150_2_4 { + opp@1400000000,1150,2,4 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1400000000_1175 { + opp@1400000000,1175 { opp-microvolt = <1175000 1175000 1250000>; }; - opp@1400000000_1237 { + opp@1400000000,1237 { opp-microvolt = <1237000 1237000 1250000>; }; - opp@1500000000_1125 { + opp@1500000000,1125 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1500000000_1125_4_5 { + opp@1500000000,1125,4,5 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1500000000_1125_4_6 { + opp@1500000000,1125,4,6 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1500000000_1125_4_12 { + opp@1500000000,1125,4,12 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1500000000_1125_4_13 { + opp@1500000000,1125,4,13 { opp-microvolt = <1125000 1125000 1250000>; }; - opp@1500000000_1150 { + opp@1500000000,1150 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1500000000_1150_3_5 { + opp@1500000000,1150,3,5 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1500000000_1150_3_6 { + opp@1500000000,1150,3,6 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1500000000_1150_3_12 { + opp@1500000000,1150,3,12 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1500000000_1150_3_13 { + opp@1500000000,1150,3,13 { opp-microvolt = <1150000 1150000 1250000>; }; - opp@1500000000_1200 { + opp@1500000000,1200 { opp-microvolt = <1200000 1200000 1250000>; }; - opp@1500000000_1237 { + opp@1500000000,1237 { opp-microvolt = <1237000 1237000 1250000>; }; - opp@1600000000_1212 { + opp@1600000000,1212 { opp-microvolt = <1212000 1212000 1250000>; }; - opp@1600000000_1237 { + opp@1600000000,1237 { opp-microvolt = <1237000 1237000 1250000>; }; - opp@1700000000_1212 { + opp@1700000000,1212 { opp-microvolt = <1212000 1212000 1250000>; }; - opp@1700000000_1237 { + opp@1700000000,1237 { opp-microvolt = <1237000 1237000 1250000>; }; }; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi index d64fc262585e..8e434f6713cd 100644 --- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -5,1195 +5,1195 @@ compatible = "operating-points-v2"; opp-shared; - opp@51000000_800 { + opp@51000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x31FE>; opp-hz = /bits/ 64 <51000000>; }; - opp@51000000_850 { + opp@51000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C01>; opp-hz = /bits/ 64 <51000000>; }; - opp@51000000_912 { + opp@51000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <51000000>; }; - opp@102000000_800 { + opp@102000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x31FE>; opp-hz = /bits/ 64 <102000000>; }; - opp@102000000_850 { + opp@102000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C01>; opp-hz = /bits/ 64 <102000000>; }; - opp@102000000_912 { + opp@102000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <102000000>; }; - opp@204000000_800 { + opp@204000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x31FE>; opp-hz = /bits/ 64 <204000000>; }; - opp@204000000_850 { + opp@204000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C01>; opp-hz = /bits/ 64 <204000000>; }; - opp@204000000_912 { + opp@204000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <204000000>; }; - opp@312000000_850 { + opp@312000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C00>; opp-hz = /bits/ 64 <312000000>; }; - opp@312000000_912 { + opp@312000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <312000000>; }; - opp@340000000_800 { + opp@340000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0192>; opp-hz = /bits/ 64 <340000000>; }; - opp@340000000_850 { + opp@340000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x0F 0x0001>; opp-hz = /bits/ 64 <340000000>; }; - opp@370000000_800 { + opp@370000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1E 0x306C>; opp-hz = /bits/ 64 <370000000>; }; - opp@456000000_850 { + opp@456000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C00>; opp-hz = /bits/ 64 <456000000>; }; - opp@456000000_912 { + opp@456000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <456000000>; }; - opp@475000000_800 { + opp@475000000,800 { clock-latency-ns = <100000>; opp-supported-hw = <0x1E 0x31FE>; opp-hz = /bits/ 64 <475000000>; }; - opp@475000000_850 { + opp@475000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x0F 0x0001>; opp-hz = /bits/ 64 <475000000>; }; - opp@475000000_850_0_1 { + opp@475000000,850,0,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0002>; opp-hz = /bits/ 64 <475000000>; }; - opp@475000000_850_0_4 { + opp@475000000,850,0,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0010>; opp-hz = /bits/ 64 <475000000>; }; - opp@475000000_850_0_7 { + opp@475000000,850,0,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0080>; opp-hz = /bits/ 64 <475000000>; }; - opp@475000000_850_0_8 { + opp@475000000,850,0,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0100>; opp-hz = /bits/ 64 <475000000>; }; - opp@608000000_850 { + opp@608000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0400>; opp-hz = /bits/ 64 <608000000>; }; - opp@608000000_912 { + opp@608000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <608000000>; }; - opp@620000000_850 { + opp@620000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1E 0x306C>; opp-hz = /bits/ 64 <620000000>; }; - opp@640000000_850 { + opp@640000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x0F 0x0001>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_1_1 { + opp@640000000,850,1,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0002>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_2_1 { + opp@640000000,850,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_3_1 { + opp@640000000,850,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_1_4 { + opp@640000000,850,1,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0010>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_2_4 { + opp@640000000,850,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_3_4 { + opp@640000000,850,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_1_7 { + opp@640000000,850,1,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0080>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_2_7 { + opp@640000000,850,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_3_7 { + opp@640000000,850,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_4_7 { + opp@640000000,850,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_1_8 { + opp@640000000,850,1,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0100>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_2_8 { + opp@640000000,850,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_3_8 { + opp@640000000,850,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_850_4_8 { + opp@640000000,850,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <640000000>; }; - opp@640000000_900 { + opp@640000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <640000000>; }; - opp@760000000_850 { + opp@760000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1E 0x3461>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_1 { + opp@760000000,850,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_2 { + opp@760000000,850,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_3 { + opp@760000000,850,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_4 { + opp@760000000,850,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_7 { + opp@760000000,850,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_4_7 { + opp@760000000,850,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_3_8 { + opp@760000000,850,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_4_8 { + opp@760000000,850,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_850_0_10 { + opp@760000000,850,0,10 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0400>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900 { + opp@760000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0001>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_1 { + opp@760000000,900,1,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0002>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_1 { + opp@760000000,900,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_2 { + opp@760000000,900,1,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_2 { + opp@760000000,900,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_3 { + opp@760000000,900,1,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0008>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_3 { + opp@760000000,900,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_4 { + opp@760000000,900,1,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0010>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_4 { + opp@760000000,900,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_7 { + opp@760000000,900,1,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0080>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_7 { + opp@760000000,900,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_1_8 { + opp@760000000,900,1,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0100>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_900_2_8 { + opp@760000000,900,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_912 { + opp@760000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <760000000>; }; - opp@760000000_975 { + opp@760000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <760000000>; }; - opp@816000000_850 { + opp@816000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0400>; opp-hz = /bits/ 64 <816000000>; }; - opp@816000000_912 { + opp@816000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <816000000>; }; - opp@860000000_850 { + opp@860000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x0C 0x0001>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900 { + opp@860000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0001>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_1 { + opp@860000000,900,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_1 { + opp@860000000,900,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_2 { + opp@860000000,900,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_2 { + opp@860000000,900,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_3 { + opp@860000000,900,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_3 { + opp@860000000,900,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_4 { + opp@860000000,900,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_4 { + opp@860000000,900,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_7 { + opp@860000000,900,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_7 { + opp@860000000,900,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_4_7 { + opp@860000000,900,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_2_8 { + opp@860000000,900,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_3_8 { + opp@860000000,900,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_900_4_8 { + opp@860000000,900,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975 { + opp@860000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0001>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_1 { + opp@860000000,975,1,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0002>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_2 { + opp@860000000,975,1,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0004>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_3 { + opp@860000000,975,1,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0008>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_4 { + opp@860000000,975,1,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0010>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_7 { + opp@860000000,975,1,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0080>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_975_1_8 { + opp@860000000,975,1,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0100>; opp-hz = /bits/ 64 <860000000>; }; - opp@860000000_1000 { + opp@860000000,1000 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <860000000>; }; - opp@910000000_900 { + opp@910000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x18 0x3060>; opp-hz = /bits/ 64 <910000000>; }; - opp@1000000000_900 { + opp@1000000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x0C 0x0001>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975 { + opp@1000000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x03 0x0001>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_1 { + opp@1000000000,975,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_1 { + opp@1000000000,975,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_2 { + opp@1000000000,975,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_2 { + opp@1000000000,975,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_3 { + opp@1000000000,975,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_3 { + opp@1000000000,975,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_4 { + opp@1000000000,975,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_4 { + opp@1000000000,975,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_7 { + opp@1000000000,975,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_7 { + opp@1000000000,975,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_4_7 { + opp@1000000000,975,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_2_8 { + opp@1000000000,975,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_3_8 { + opp@1000000000,975,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_975_4_8 { + opp@1000000000,975,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1000 { + opp@1000000000,1000 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x019E>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1000000000_1025 { + opp@1000000000,1025 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <1000000000>; }; - opp@1100000000_900 { + opp@1100000000,900 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0001>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975 { + opp@1100000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x06 0x0001>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_1 { + opp@1100000000,975,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_2 { + opp@1100000000,975,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_3 { + opp@1100000000,975,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_4 { + opp@1100000000,975,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_7 { + opp@1100000000,975,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_4_7 { + opp@1100000000,975,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_3_8 { + opp@1100000000,975,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_975_4_8 { + opp@1100000000,975,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000 { + opp@1100000000,1000 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0001>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_1 { + opp@1100000000,1000,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_2 { + opp@1100000000,1000,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_3 { + opp@1100000000,1000,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_4 { + opp@1100000000,1000,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_7 { + opp@1100000000,1000,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1000_2_8 { + opp@1100000000,1000,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1025 { + opp@1100000000,1025 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x019E>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1100000000_1075 { + opp@1100000000,1075 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <1100000000>; }; - opp@1150000000_975 { + opp@1150000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x18 0x3060>; opp-hz = /bits/ 64 <1150000000>; }; - opp@1200000000_975 { + opp@1200000000,975 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0001>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000 { + opp@1200000000,1000 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_1 { + opp@1200000000,1000,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_2 { + opp@1200000000,1000,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_3 { + opp@1200000000,1000,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_4 { + opp@1200000000,1000,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_7 { + opp@1200000000,1000,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_4_7 { + opp@1200000000,1000,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_3_8 { + opp@1200000000,1000,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1000_4_8 { + opp@1200000000,1000,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025 { + opp@1200000000,1025 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0001>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_1 { + opp@1200000000,1025,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_2 { + opp@1200000000,1025,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_3 { + opp@1200000000,1025,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_4 { + opp@1200000000,1025,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_7 { + opp@1200000000,1025,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1025_2_8 { + opp@1200000000,1025,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1050 { + opp@1200000000,1050 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x019E>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1075 { + opp@1200000000,1075 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0001>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1200000000_1100 { + opp@1200000000,1100 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0192>; opp-hz = /bits/ 64 <1200000000>; }; - opp@1300000000_1000 { + opp@1300000000,1000 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0001>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1000_4_7 { + opp@1300000000,1000,4,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0080>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1000_4_8 { + opp@1300000000,1000,4,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0100>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1025 { + opp@1300000000,1025 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0001>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1025_3_1 { + opp@1300000000,1025,3,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0002>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1025_3_7 { + opp@1300000000,1025,3,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0080>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1025_3_8 { + opp@1300000000,1025,3,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0100>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050 { + opp@1300000000,1050 { clock-latency-ns = <100000>; opp-supported-hw = <0x12 0x3061>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_2_1 { + opp@1300000000,1050,2,1 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0002>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_2 { + opp@1300000000,1050,3,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0004>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_3 { + opp@1300000000,1050,3,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0008>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_4 { + opp@1300000000,1050,3,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_5 { + opp@1300000000,1050,3,5 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0020>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_6 { + opp@1300000000,1050,3,6 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0040>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_2_7 { + opp@1300000000,1050,2,7 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0080>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_2_8 { + opp@1300000000,1050,2,8 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0100>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_12 { + opp@1300000000,1050,3,12 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x1000>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1050_3_13 { + opp@1300000000,1050,3,13 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x2000>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1075 { + opp@1300000000,1075 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0182>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1075_2_2 { + opp@1300000000,1075,2,2 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0004>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1075_2_3 { + opp@1300000000,1075,2,3 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0008>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1075_2_4 { + opp@1300000000,1075,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1100 { + opp@1300000000,1100 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x001C>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1125 { + opp@1300000000,1125 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0001>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1150 { + opp@1300000000,1150 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0182>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1300000000_1175 { + opp@1300000000,1175 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0010>; opp-hz = /bits/ 64 <1300000000>; }; - opp@1400000000_1100 { + opp@1400000000,1100 { clock-latency-ns = <100000>; opp-supported-hw = <0x18 0x307C>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1400000000_1125 { + opp@1400000000,1125 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x000C>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1400000000_1150 { + opp@1400000000,1150 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x000C>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1400000000_1150_2_4 { + opp@1400000000,1150,2,4 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1400000000_1175 { + opp@1400000000,1175 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0010>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1400000000_1237 { + opp@1400000000,1237 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0010>; opp-hz = /bits/ 64 <1400000000>; }; - opp@1500000000_1125 { + opp@1500000000,1125 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0010>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1125_4_5 { + opp@1500000000,1125,4,5 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0020>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1125_4_6 { + opp@1500000000,1125,4,6 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x0040>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1125_4_12 { + opp@1500000000,1125,4,12 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x1000>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1125_4_13 { + opp@1500000000,1125,4,13 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x2000>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1150 { + opp@1500000000,1150 { clock-latency-ns = <100000>; opp-supported-hw = <0x04 0x0010>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1150_3_5 { + opp@1500000000,1150,3,5 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0020>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1150_3_6 { + opp@1500000000,1150,3,6 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x0040>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1150_3_12 { + opp@1500000000,1150,3,12 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x1000>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1150_3_13 { + opp@1500000000,1150,3,13 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x2000>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1200 { + opp@1500000000,1200 { clock-latency-ns = <100000>; opp-supported-hw = <0x02 0x0010>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1500000000_1237 { + opp@1500000000,1237 { clock-latency-ns = <100000>; opp-supported-hw = <0x01 0x0010>; opp-hz = /bits/ 64 <1500000000>; }; - opp@1600000000_1212 { + opp@1600000000,1212 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x3060>; opp-hz = /bits/ 64 <1600000000>; }; - opp@1600000000_1237 { + opp@1600000000,1237 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x3060>; opp-hz = /bits/ 64 <1600000000>; }; - opp@1700000000_1212 { + opp@1700000000,1212 { clock-latency-ns = <100000>; opp-supported-hw = <0x10 0x3060>; opp-hz = /bits/ 64 <1700000000>; }; - opp@1700000000_1237 { + opp@1700000000,1237 { clock-latency-ns = <100000>; opp-supported-hw = <0x08 0x3060>; opp-hz = /bits/ 64 <1700000000>; -- cgit v1.2.3 From 90b1307ac545e6e7e26f7a6be9e9ef49c4a650b1 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:54:09 +0200 Subject: ARM: tegra: medcom-wide: Remove extra panel power supply Simple panels can only have a single power supply. The second listed supply is not needed because it is also the input supply of the first supply and therefore will always be on at the same time. In retrospect the panel probably doesn't qualify as simple since it apparently does need both of these supplies, even if in the case of the Medcom Wide it isn't necessary to explicitly hook them up. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-medcom-wide.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 049181421a86..a348ca30e522 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -59,7 +59,7 @@ panel: panel { compatible = "innolux,n156bge-l21"; - power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; + power-supply = <&vdd_1v8_reg>; // <&vdd_3v3_reg>; enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; backlight = <&backlight>; -- cgit v1.2.3 From 86b224beea5faf6b18204e5e324bcde472488096 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:55:48 +0200 Subject: ARM: tegra: Use numeric unit-addresses Unit-addresses should be numeric. This fixes a validation failure seen using the json-schema tooling. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-paz00.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 91b6bb82e960..f6aa783b0f02 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -314,7 +314,7 @@ memory-controller@7000f400 { nvidia,use-ram-code; - emc-tables@hynix { + emc-tables@0 { nvidia,ram-code = <0x0>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From eb711490c4e9ee7383bd18baf0272ea3c97b832c Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:56:47 +0200 Subject: ARM: tegra: Use standard names for LED nodes LED nodes should be named led-* to match the bindings. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-paz00.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index f6aa783b0f02..ada2bed8b1b5 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -589,7 +589,7 @@ gpio-leds { compatible = "gpio-leds"; - wifi { + led-0 { label = "wifi-led"; gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; linux,default-trigger = "rfkill0"; -- cgit v1.2.3 From cea37ffc82e7ec2867e3b5cce70e2a0015b1b609 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:57:32 +0200 Subject: ARM: tegra: seaboard: Use standard battery bindings Seaboard uses a non-existing, possibly obsoleted, binding for the battery. Move to the standard binding which seems to be a super- set of the odl binding. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20-seaboard.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index f1baf16c5010..c24d4a37613e 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -394,10 +394,10 @@ #size-cells = <0>; smart-battery@b { - compatible = "ti,bq20z75", "smart-battery-1.1"; + compatible = "ti,bq20z75", "sbs,sbs-battery"; reg = <0xb>; - ti,i2c-retry-count = <2>; - ti,poll-retry-count = <10>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <10>; }; }; }; -- cgit v1.2.3 From 7fb099528bbe92157a5e2bdc94b6f5e0269f0dd6 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:58:33 +0200 Subject: ARM: tegra: Use standard names for SRAM nodes SRAM nodes should be named sram@ to match the bindings. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20.dtsi | 4 ++-- arch/arm/boot/dts/tegra30.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e51d7618f9c9..899ec5a1e1f9 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -17,14 +17,14 @@ reg = <0 0>; }; - iram@40000000 { + sram@40000000 { compatible = "mmio-sram"; reg = <0x40000000 0x40000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40000000 0x40000>; - vde_pool: vde@400 { + vde_pool: sram@400 { reg = <0x400 0x3fc00>; pool; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index def18a86a36a..2007c603aba2 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -97,14 +97,14 @@ }; }; - iram@40000000 { + sram@40000000 { compatible = "mmio-sram"; reg = <0x40000000 0x40000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x40000000 0x40000>; - vde_pool: vde@400 { + vde_pool: sram@400 { reg = <0x400 0x3fc00>; pool; }; -- cgit v1.2.3 From eb6563a681e2fdf5e33a3ede03c8768059d3a8d3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 19:59:25 +0200 Subject: ARM: tegra: Add parent clock to DSI output The DSI output needs to specify a parent clock that will be used to drive both the output and the display controller. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra20.dtsi | 4 +++- arch/arm/boot/dts/tegra30.dtsi | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 899ec5a1e1f9..72a4211a618f 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -156,7 +156,9 @@ dsi@54300000 { compatible = "nvidia,tegra20-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car TEGRA20_CLK_DSI>; + clocks = <&tegra_car TEGRA20_CLK_DSI>, + <&tegra_car TEGRA20_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; resets = <&tegra_car 48>; reset-names = "dsi"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2007c603aba2..08d0ee4ad7c1 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -257,7 +257,9 @@ dsi@54300000 { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; - clocks = <&tegra_car TEGRA30_CLK_DSIA>; + clocks = <&tegra_car TEGRA30_CLK_DSIA>, + <&tegra_car TEGRA30_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; resets = <&tegra_car 48>; reset-names = "dsi"; status = "disabled"; -- cgit v1.2.3 From 2f4998815412a1b2a840679378f13276eca6987d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 20:00:12 +0200 Subject: ARM: tegra: Remove spurious comma from node name This was probably left there by mistake or perhaps was a typo in the first place. Remove it. Cc: Marcel Ziswiler Cc: Philippe Schenker Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 933087ee45a8..e36aa3ce6c3d 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -527,7 +527,7 @@ }; /* Colibri USBH_OC */ - spi2-cs2-n-pw3, { + spi2-cs2-n-pw3 { nvidia,pins = "spi2_cs2_n_pw3"; nvidia,function = "spi2_alt"; nvidia,pull = ; -- cgit v1.2.3 From 06227e3a0baf64fcc60b267db9e68b93e32f477f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 20:01:38 +0200 Subject: ARM: tegra: The Tegra30 DC is not backwards-compatible The display controller on Tegra30 is in fact not backwards-compatible with the instantiation found on earlier SoCs. Drop the misleading compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 08d0ee4ad7c1..8930255a5ff6 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -197,7 +197,7 @@ }; dc@54200000 { - compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc"; + compatible = "nvidia,tegra30-dc"; reg = <0x54200000 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_DISP1>, -- cgit v1.2.3 From f3de06b4fa7cbdeece84003d74f650abc64729aa Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 11 Jun 2020 20:02:42 +0200 Subject: ARM: tegra: The Tegra30 SDHCI is not backwards-compatible The SDHCI on Tegra30 is in fact not backwards-compatible with the instantiation found on earlier SoCs. Drop the misleading compatible string. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 8930255a5ff6..325b593f394e 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -856,7 +856,7 @@ }; mmc@78000000 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + compatible = "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC1>; @@ -867,7 +867,7 @@ }; mmc@78000200 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + compatible = "nvidia,tegra30-sdhci"; reg = <0x78000200 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC2>; @@ -878,7 +878,7 @@ }; mmc@78000400 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + compatible = "nvidia,tegra30-sdhci"; reg = <0x78000400 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC3>; @@ -889,7 +889,7 @@ }; mmc@78000600 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + compatible = "nvidia,tegra30-sdhci"; reg = <0x78000600 0x200>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_SDMMC4>; -- cgit v1.2.3 From 63e58f2bb9d8e7b56bf2a2ccf607d6bb4340d32a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 15 Jun 2020 10:41:04 +0200 Subject: ARM: dts: bcm2711: Add firmware clocks node Now that we have a clock driver for the clocks exposed by the firmware, let's add the device tree nodes for it. Tested-by: Nicolas Saenz Julienne Signed-off-by: Maxime Ripard Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/9a6f113140b3115150bfb18ecb248a48d58562cf.1592210452.git-series.maxime@cerno.tech --- arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index c7f1d97e69bb..222d7825e1ab 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -69,6 +69,11 @@ }; &firmware { + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + expgpio: gpio { compatible = "raspberrypi,firmware-gpio"; gpio-controller; -- cgit v1.2.3 From a184ea9f41da3a65150713656cea58dc964af454 Mon Sep 17 00:00:00 2001 From: Anand Moon Date: Wed, 24 Jun 2020 11:04:35 +0000 Subject: ARM: dts: exynos: Align L2 cache-controller nodename with dtschema Fix dtschema warning message by changing nodename to 'cache-controller': DT_SCHEMA_FILES=Documentation/devicetree/bindings/arm/l2c2x0.yaml arch/arm/boot/dts/exynos4210-i9100.dt.yaml: l2-cache-controller@10502000: $nodename:0: 'l2-cache-controller@10502000' does not match ' ^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Anand Moon Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4210.dtsi | 2 +- arch/arm/boot/dts/exynos4412.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index b4466232f0c1..33435ce79ce4 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -97,7 +97,7 @@ label = "LCD1"; }; - l2c: l2-cache-controller@10502000 { + l2c: cache-controller@10502000 { compatible = "arm,pl310-cache"; reg = <0x10502000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 48868947373e..7002832eb4c0 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -213,7 +213,7 @@ label = "ISP"; }; - l2c: l2-cache-controller@10502000 { + l2c: cache-controller@10502000 { compatible = "arm,pl310-cache"; reg = <0x10502000 0x1000>; cache-unified; -- cgit v1.2.3 From 4b0ee283de6c525478c98d3b3d15a4aed7d96de6 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Tue, 9 Jun 2020 21:54:14 +0100 Subject: ARM: dts: r8a7742: Add MSIOF[0123] support Add the DT nodes needed by MSIOF[0123] interfaces to the SoC dtsi. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1591736054-568-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7742.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 08af9e2943cb..08d89cfb04d8 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -853,6 +853,70 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7742", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7742", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7742", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 205>; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 205>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-r8a7742", + "renesas,rcar-gen2-msiof"; + reg = <0 0xe6c90000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 215>; + dmas = <&dmac0 0x45>, <&dmac0 0x46>, + <&dmac1 0x45>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7742_PD_ALWAYS_ON>; + resets = <&cpg 215>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required -- cgit v1.2.3 From 8bd35145975d9f9f92bfd508a6f705f9bf6c50a2 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 11 Jun 2020 20:13:41 +0900 Subject: arm64: dts: renesas: r8a77961: Add IPMMU nodes Add IPMMU nodes for r8a77961 (R-Car M3-W+). Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1591874021-10209-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77961.dtsi | 89 +++++++++++++++++++++++++++++++ 1 file changed, 89 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index 760e738b75b3..de5770cbf19b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -883,6 +883,95 @@ dma-channels = <16>; }; + ipmmu_ds0: iommu@e6740000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@e7740000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@e6570000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77961_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@e67b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = , + ; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: iommu@ec670000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: iommu@fd800000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: iommu@fd950000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: iommu@ffc80000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A77961_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@febd0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77961", "renesas,etheravb-rcar-gen3"; -- cgit v1.2.3 From a80f301ea69e76f10099626986b4674c6f990a15 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:00 +0100 Subject: arm64: dts: renesas: r8a774a1-hihope-rzg2m[-ex/-ex-idk-1110wr]: Rename HiHope RZ/G2M boards The existing DTS files for HiHope RZ/G2M boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. While at it also added a comment about switch SW43 to be OFF for pciec1 to be activated. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 6 +-- .../r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts | 52 ---------------------- .../boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts | 19 -------- .../r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts | 52 ++++++++++++++++++++++ .../dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts | 20 +++++++++ .../dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts | 37 +++++++++++++++ .../boot/dts/renesas/r8a774a1-hihope-rzg2m.dts | 37 --------------- 7 files changed, 112 insertions(+), 111 deletions(-) delete mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts delete mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts delete mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index d17351cdbce0..e8461918f441 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts deleted file mode 100644 index 2ab5edd84e9b..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts +++ /dev/null @@ -1,52 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the HiHope RZ/G2M sub board connected to an - * Advantech IDK-1110WR 10.1" LVDS panel - * - * Copyright (C) 2020 Renesas Electronics Corp. - */ - -#include "r8a774a1-hihope-rzg2m-ex.dts" -#include "rzg2-advantech-idk-1110wr-panel.dtsi" - -/ { - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000>; - - brightness-levels = <0 2 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - -}; - -&gpio1 { - /* - * When GP1_20 is LOW LVDS0 is connected to the LVDS connector - * When GP1_20 is HIGH LVDS0 is connected to the LT8918L - */ - lvds-connector-en-gpio { - gpio-hog; - gpios = <20 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "lvds-connector-en-gpio"; - }; -}; - -&lvds0 { - status = "okay"; -}; - -&pfc { - pwm0_pins: pwm0 { - groups = "pwm0"; - function = "pwm0"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts deleted file mode 100644 index c754fca239d9..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ /dev/null @@ -1,19 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the HiHope RZ/G2M sub board - * - * Copyright (C) 2019 Renesas Electronics Corp. - */ - -#include "r8a774a1-hihope-rzg2m.dts" -#include "hihope-rzg2-ex.dtsi" - -/ { - model = "HopeRun HiHope RZ/G2M with sub board"; - compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", - "renesas,r8a774a1"; -}; - -&pciec1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts new file mode 100644 index 000000000000..3a1dcc914985 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an + * Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-rev2-ex.dts" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +/ { + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + +}; + +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + status = "okay"; +}; + +&pfc { + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts new file mode 100644 index 000000000000..2221cf6aed21 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-rev2.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; + +/* SW43 should be OFF, if in ON state SATA port will be activated */ +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts new file mode 100644 index 000000000000..276f449ad14e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts deleted file mode 100644 index 96f2fb080a1a..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the HiHope RZ/G2M main board - * - * Copyright (C) 2019 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a774a1.dtsi" -#include "hihope-common.dtsi" - -/ { - model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; - compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x80000000>; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; -}; -- cgit v1.2.3 From 59d8eee863ab5936e8fbb9b9b6a26e21d5078229 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:01 +0100 Subject: arm64: dts: renesas: r8a774b1-hihope-rzg2n[-ex]: Rename HiHope RZ/G2N boards The existing DTS files for HiHope RZ/G2N boards are for Rev.2.0 version so reflect the same for the DTS file names so that the existing naming convention can be used for Rev.3.0/4.0 boards. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 4 +-- .../boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 15 -------- .../dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts | 15 ++++++++ .../dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts | 41 ++++++++++++++++++++++ .../boot/dts/renesas/r8a774b1-hihope-rzg2n.dts | 41 ---------------------- 5 files changed, 58 insertions(+), 58 deletions(-) delete mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts delete mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index e8461918f441..fc171c3d6986 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -2,8 +2,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ r8a774c0-ek874-idk-2121wr.dtb \ r8a774c0-ek874-mipi-2.1.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts deleted file mode 100644 index ab47c0bd9c19..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the HiHope RZ/G2N sub board - * - * Copyright (C) 2019 Renesas Electronics Corp. - */ - -#include "r8a774b1-hihope-rzg2n.dts" -#include "hihope-rzg2-ex.dtsi" - -/ { - model = "HopeRun HiHope RZ/G2N with sub board"; - compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", - "renesas,r8a774b1"; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts new file mode 100644 index 000000000000..2e5e1de04049 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-rev2.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts new file mode 100644 index 000000000000..eb1206b2d97a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts deleted file mode 100644 index 9910c1aa0a61..000000000000 --- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts +++ /dev/null @@ -1,41 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the HiHope RZ/G2N main board - * - * Copyright (C) 2019 Renesas Electronics Corp. - */ - -/dts-v1/; -#include "r8a774b1.dtsi" -#include "hihope-common.dtsi" - -/ { - model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; - compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; - - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x78000000>; - }; - - memory@480000000 { - device_type = "memory"; - reg = <0x4 0x80000000 0x0 0x80000000>; - }; -}; - -&du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 721>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.3", - "dclkin.0", "dclkin.1", "dclkin.3"; -}; - -&sdhi3 { - mmc-hs400-1_8v; -}; -- cgit v1.2.3 From 99167613db6e439d877131e1fbe617e4420b954f Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:02 +0100 Subject: arm64: dts: renesas: hihope-common: Separate out Rev.2.0 specific into hihope-rev2.dtsi file Separate out Rev.2.0 specific hardware changes into hihope-rev2.dtsi file so that hihope-common.dtsi can be used by all the variants for RZ/G2M[N] boards. LED node names have been updated according to Rev.4.0 schematics. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/hihope-common.dtsi | 71 +----------------- arch/arm64/boot/dts/renesas/hihope-rev2.dtsi | 86 ++++++++++++++++++++++ .../dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts | 2 +- .../dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts | 2 +- 4 files changed, 92 insertions(+), 69 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/hihope-rev2.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index bd056904e8bd..beddfd7a7584 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * Device Tree Source for the HiHope RZ/G2[MN] main board + * Rev.[2.0/3.0/4.0] common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ @@ -32,17 +33,6 @@ leds { compatible = "gpio-leds"; - bt_active_led { - label = "blue:bt"; - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - - led0 { - gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; - }; - led1 { gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; }; @@ -55,11 +45,8 @@ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; - wlan_active_led { - label = "yellow:wlan"; - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; + led4 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; }; }; @@ -112,17 +99,6 @@ states = <3300000 1>, <1800000 0>; }; - wlan_en_reg: regulator-wlan_en { - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - startup-delay-us = <70000>; - - gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - x302_clk: x302-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -194,11 +170,6 @@ uart-has-rtscts; status = "okay"; - - bluetooth { - compatible = "ti,wl1837-st"; - enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; - }; }; &hsusb { @@ -210,13 +181,6 @@ clock-frequency = <400000>; status = "okay"; - gpio_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; @@ -281,11 +245,6 @@ power-source = <1800>; }; - sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; - function = "audio_clk"; - }; - usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -309,28 +268,6 @@ }; }; -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - rsnd_port: port { - rsnd_endpoint: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint>; - frame-master = <&rsnd_endpoint>; - - playback = <&ssi2>; - }; - }; -}; - &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi new file mode 100644 index 000000000000..8e2db1d6ca81 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common + * parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include +#include "hihope-common.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&hscif0 { + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c4 { + gpio_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pfc { + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + playback = <&ssi2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts index 276f449ad14e..bb18f6ee2048 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "r8a774a1.dtsi" -#include "hihope-common.dtsi" +#include "hihope-rev2.dtsi" / { model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1"; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts index eb1206b2d97a..c69ca5cf6f77 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "r8a774b1.dtsi" -#include "hihope-common.dtsi" +#include "hihope-rev2.dtsi" / { model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1"; -- cgit v1.2.3 From faf1ce7f1ef65af81bd85fe9c70950571cd70b19 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:03 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2M[N] Rev.3.0/4.0 specific into common file Rev.3.0 and Rev.4.0 are identical and can be identified by using GP5_19 and GP5_21. Rev GP5_19 GP5_21 ============================== Rev.3.0 0 0 Rev.4.0 0 1 This patch creates hihope-rev4.dtsi file with Rev.3.0/4.0 specific changes for HopeRun HiHope RZ/G2M[N] boards. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/hihope-rev4.dtsi | 124 +++++++++++++++++++++++++++ 1 file changed, 124 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/hihope-rev4.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi new file mode 100644 index 000000000000..9f869187aea6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] Rev.3.0/4.0 main board + * common parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include +#include "hihope-common.dtsi" + +/ { + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x1801_clk: x1801-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&hscif0 { + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x1801_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&pfc { + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + /* update to */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + playback = <&ssi2>; + }; + }; +}; -- cgit v1.2.3 From 8c41b3d7a7abc4af05eda380ddb17b8457a3f3de Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:04 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 main board support Add support for HiHope RZ/G2M Rev.3.0/4.0 main board support based on r8a774a1 SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 3 +- .../boot/dts/renesas/r8a774a1-hihope-rzg2m.dts | 37 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 2 ++ 3 files changed, 41 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index fc171c3d6986..447947dfdb55 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \ + r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts new file mode 100644 index 000000000000..25ae255de0f2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-rev4.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index a603d947970e..51a572898fd6 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -10,6 +10,8 @@ #include #include +#define CPG_AUDIO_CLK_I R8A774A1_CLK_S0D4 + / { compatible = "renesas,r8a774a1"; #address-cells = <2>; -- cgit v1.2.3 From 035329301e633c28601f333f16a73c29e3819fac Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:05 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 sub board support The HiHope RZ/G2M sub board sits below the HiHope RZ/G2M Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 3 ++- .../boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts | 21 +++++++++++++++++++++ 2 files changed, 23 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 447947dfdb55..7878e6c2743f 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \ r8a774a1-hihope-rzg2m-rev2.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \ + r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts new file mode 100644 index 000000000000..a5ca86196a7b --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to + * sub board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; + +/* SW43 should be OFF, if in ON state SATA port will be activated */ +&pciec1 { + status = "okay"; +}; -- cgit v1.2.3 From b0990638b625f4066396051c60b2f5480823f085 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:06 +0100 Subject: arm64: dts: renesas: hihope-rzg2-ex: Separate out lvds specific nodes into common file Separate out LVDS specific nodes into common file hihope-rzg2-ex-lvds.dtsi so that this can be re-used by RZ/G2M[N] variants. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- .../boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi | 52 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 37 --------------- .../r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts | 39 +--------------- 3 files changed, 53 insertions(+), 75 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi new file mode 100644 index 000000000000..40c5e8d6d841 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/ { + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; + +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + +&pfc { + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 28fe17e3bc4e..acfcfd050a6c 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -13,14 +13,6 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000>; - - brightness-levels = <0 2 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; }; &avb { @@ -51,35 +43,6 @@ status = "okay"; }; -&gpio1 { - /* - * When GP1_20 is LOW LVDS0 is connected to the LVDS connector - * When GP1_20 is HIGH LVDS0 is connected to the LT8918L - */ - lvds-connector-en-gpio { - gpio-hog; - gpios = <20 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "lvds-connector-en-gpio"; - }; -}; - -&lvds0 { - /* - * Please include the LVDS panel .dtsi file and uncomment the below line - * to enable LVDS panel connected to RZ/G2[MN] boards. - */ - - /* status = "okay"; */ - - ports { - port@1 { - lvds_connector: endpoint { - }; - }; - }; -}; - &pciec0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts index 3a1dcc914985..c0e9d8ca4a8c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts @@ -7,46 +7,9 @@ */ #include "r8a774a1-hihope-rzg2m-rev2-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" #include "rzg2-advantech-idk-1110wr-panel.dtsi" -/ { - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000>; - - brightness-levels = <0 2 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - -}; - -&gpio1 { - /* - * When GP1_20 is LOW LVDS0 is connected to the LVDS connector - * When GP1_20 is HIGH LVDS0 is connected to the LT8918L - */ - lvds-connector-en-gpio { - gpio-hog; - gpios = <20 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "lvds-connector-en-gpio"; - }; -}; - &lvds0 { status = "okay"; }; - -&pfc { - pwm0_pins: pwm0 { - groups = "pwm0"; - function = "pwm0"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; -- cgit v1.2.3 From 51fb6306d0587ab24187f429a703272aab466b1e Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:07 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2M Rev.3.0/4.0 board with idk-1110wr display Add support for idk-1110wr display as similarly done for Rev.2.0 Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 3 ++- .../dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts | 15 +++++++++++++++ 2 files changed, 17 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 7878e6c2743f..f09abfc43825 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -3,7 +3,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \ r8a774a1-hihope-rzg2m-rev2.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \ r8a774a1-hihope-rzg2m-rev2-ex.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \ + r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts new file mode 100644 index 000000000000..06c04c59cc78 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; -- cgit v1.2.3 From d728a4476a118ff4d075459fd4594f7c46e27fc0 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:08 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 main board support Add support for HiHope RZ/G2N Rev.3.0/4.0 main board support based on r8a774b1 SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 3 +- .../boot/dts/renesas/r8a774b1-hihope-rzg2n.dts | 41 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 2 ++ 3 files changed, 45 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index f09abfc43825..0c152c6048ce 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -5,7 +5,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \ r8a774a1-hihope-rzg2m-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \ r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb \ + r8a774b1-hihope-rzg2n-rev2.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ r8a774c0-ek874-idk-2121wr.dtb \ diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts new file mode 100644 index 000000000000..f1883cbd1a82 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0 + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-rev4.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index 1e51855c7cd3..b221f2575e63 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -10,6 +10,8 @@ #include #include +#define CPG_AUDIO_CLK_I R8A774B1_CLK_S0D4 + / { compatible = "renesas,r8a774b1"; #address-cells = <2>; -- cgit v1.2.3 From 8fb161447da014417eb43944369e8f35bb4c1b56 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:09 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2N Rev.3.0/4.0 sub board support The HiHope RZ/G2N sub board sits below the HiHope RZ/G2N Rev.3.0/4.0 main board. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 3 ++- arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 0c152c6048ce..6ac2a197e06e 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -7,7 +7,8 @@ dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \ r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb \ r8a774b1-hihope-rzg2n-rev2.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb \ + r8a774b1-hihope-rzg2n-rev2-ex.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ r8a774c0-ek874-idk-2121wr.dtb \ r8a774c0-ek874-mipi-2.1.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file mode 100644 index 000000000000..a3edd55113df --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to + * sub board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; -- cgit v1.2.3 From 667175f5029c5f6ec7a72811fc6b14c33d252286 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 24 Jun 2020 14:12:10 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2N Rev2.0/3.0/4.0 board with idk-1110wr display The HiHope RZ/G2N variants are advertised as compatible with panel idk-1110wr from Advantech, however the panel isn't sold alongside the board. New dts's, enabling the lvds node to get the panel to work with all the HiHope RZ/G2N variants. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1593004330-5039-12-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 2 ++ .../dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts | 15 +++++++++++++++ .../renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts | 15 +++++++++++++++ 3 files changed, 32 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 6ac2a197e06e..21cc63469082 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -9,6 +9,8 @@ dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb \ r8a774b1-hihope-rzg2n-rev2.dtb dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb \ r8a774b1-hihope-rzg2n-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb \ + r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ r8a774c0-ek874-idk-2121wr.dtb \ r8a774c0-ek874-mipi-2.1.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts new file mode 100644 index 000000000000..4b5154f029a5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts new file mode 100644 index 000000000000..e730b3b25dbe --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-rev2-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; -- cgit v1.2.3 From 5f6b33f463468b9595eebfed142756ba13ea2b60 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Wed, 10 Jun 2020 12:05:36 +0300 Subject: ARM: dts: sam9x60: add rtt Add RTT. Allong with it enable GBPR as it is requested by RTT. Signed-off-by: Claudiu Beznea Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/1591779936-18577-4-git-send-email-claudiu.beznea@microchip.com --- arch/arm/boot/dts/at91-sam9x60ek.dts | 9 +++++++++ arch/arm/boot/dts/sam9x60.dtsi | 7 +++++++ 2 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 8652dbbae5be..ca15ff8fea18 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -309,6 +309,10 @@ }; }; +&gpbr { + status = "okay"; +}; + &i2s { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2s_default>; @@ -636,6 +640,11 @@ }; }; +&rtt { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; +}; + &shutdown_controller { atmel,shdwc-debouncer = <976>; status = "okay"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 6763423d64b8..d10843da4a85 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -661,6 +661,13 @@ status = "disabled"; }; + rtt: rtt@fffffe20 { + compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; + reg = <0xfffffe20 0x20>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + }; + pit: timer@fffffe40 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe40 0x10>; -- cgit v1.2.3 From 51139cc82c8d6edec034a6c2401090070195fa13 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Thu, 18 Jun 2020 18:28:45 +0300 Subject: ARM: dts: at91: sama5d2_xplained: Remove pdmic node The PDMIC needs PDM microphones to work. sama5d2 xplained doesn't have such microphones, so there is no reason to enable PDMIC and take the pins since there is no-one using them. Signed-off-by: Codrin Ciubotariu Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200618152845.682723-1-codrin.ciubotariu@microchip.com --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 0e17df568d0b..058fae1b4a76 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -168,16 +168,6 @@ }; }; - pdmic@f8018000 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pdmic_default>; - atmel,model = "PDMIC @ sama5d2_xplained"; - atmel,mic-min-freq = <1000000>; - atmel,mic-max-freq = <3246000>; - atmel,mic-offset = <0x0>; - status = "okay"; - }; - uart1: serial@f8020000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; @@ -599,12 +589,6 @@ bias-disable; }; - pinctrl_pdmic_default: pdmic_default { - pinmux = , - ; - bias-disable; - }; - pinctrl_qspi0_default: qspi0_default { sck_cs { pinmux = , -- cgit v1.2.3 From b7f13b914730026ca7fdc0d5ef6a791f3c613fe2 Mon Sep 17 00:00:00 2001 From: Ulrich Hecht Date: Tue, 8 Sep 2015 17:42:23 +0200 Subject: ARM: dts: r8a7778: Enable IRLM setup via DT Make use of the IRLM setup feature in the renesas-intc-irqpin driver. Signed-off-by: Ulrich Hecht Tested-by: Simon Horman Link: https://lore.kernel.org/r/1441726946-30131-3-git-send-email-ulrich.hecht+renesas@gmail.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7778.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 593c6df90303..887ffa9819ae 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -78,7 +78,8 @@ <0xfe780010 4>, <0xfe780024 4>, <0xfe780044 4>, - <0xfe780064 4>; + <0xfe780064 4>, + <0xfe780000 4>; interrupts = , , , -- cgit v1.2.3 From c312f066314e3dfb99fe7db8b8b43c4d8992c90c Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 17 Jun 2020 05:58:40 -0500 Subject: ARM: dts: omap3: Migrate AES from hwmods to sysc-omap2 Various OMAP3 boards have two AES blocks, but only one is currently available, because the hwmods are only configured for one. This patch migrates the hwmods for the AES engine to sysc-omap2 which allows the second AES crypto engine to become available. omap-aes 480a6000.aes1: OMAP AES hw accel rev: 2.6 omap-aes 480a6000.aes1: will run requests pump with realtime priority omap-aes 480c5000.aes2: OMAP AES hw accel rev: 2.6 omap-aes 480c5000.aes2: will run requests pump with realtime priority Signed-off-by: Adam Ford [tony@atomide.com: updated to disable both aes_targets on hs boards] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3517.dtsi | 4 ++ arch/arm/boot/dts/omap3-n900.dts | 6 ++- arch/arm/boot/dts/omap3-tao3530.dtsi | 6 ++- arch/arm/boot/dts/omap3.dtsi | 57 ++++++++++++++++++++++++---- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 61 ------------------------------ 5 files changed, 64 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index dc8927f14b6c..9cb88f7700bb 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -10,6 +10,10 @@ #include "omap3.dtsi" +/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */ +/delete-node/ &aes1_target; +/delete-node/ &aes2_target; + / { aliases { serial3 = &uart4; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..0905b6849e58 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -19,7 +19,11 @@ * but it is not widely used and to prevent kernel crash rather AES is disabled. * There is also no runtime detection code if AES is disabled in L3 firewall... */ -&aes { +&aes1_target { + status = "disabled"; +}; + +&aes2_target { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index f24e2326cfa7..59e375dfadf1 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -8,7 +8,11 @@ #include "omap34xx.dtsi" /* Secure omaps have some devices inaccessible depending on the firmware */ -&aes { +&aes1_target { + status = "disabled"; +}; + +&aes2_target { status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1296d0643943..6e874ed64009 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -157,13 +157,56 @@ }; }; - aes: aes@480c5000 { - compatible = "ti,omap3-aes"; - ti,hwmods = "aes"; - reg = <0x480c5000 0x50>; - interrupts = <0>; - dmas = <&sdma 65 &sdma 66>; - dma-names = "tx", "rx"; + aes1_target: target-module@480a6000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480a6044 0x4>, + <0x480a6048 0x4>, + <0x480a604c 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&aes1_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480a6000 0x2000>; + + aes1: aes1@0 { + compatible = "ti,omap3-aes"; + reg = <0 0x50>; + interrupts = <0>; + dmas = <&sdma 9 &sdma 10>; + dma-names = "tx", "rx"; + }; + }; + + aes2_target: target-module@480c5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x480c5044 0x4>, + <0x480c5048 0x4>, + <0x480c504c 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>; + ti,sysc-sidle = , + , + ; + ti,syss-mask = <1>; + clocks = <&aes2_ick>; + clock-names = "ick"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x480c5000 0x2000>; + + aes2: aes2@0 { + compatible = "ti,omap3-aes"; + reg = <0 0x50>; + interrupts = <0>; + dmas = <&sdma 65 &sdma 66>; + dma-names = "tx", "rx"; + }; }; prm: prm@48306000 { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index ca02f91237e3..b6c7d98a9eff 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2342,44 +2342,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_core -> AES */ -static struct omap_hwmod_class_sysconfig omap3_aes_sysc = { - .rev_offs = 0x44, - .sysc_offs = 0x48, - .syss_offs = 0x4c, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap3xxx_aes_sysc_fields, -}; - -static struct omap_hwmod_class omap3xxx_aes_class = { - .name = "aes", - .sysc = &omap3_aes_sysc, -}; - - -static struct omap_hwmod omap3xxx_aes_hwmod = { - .name = "aes", - .main_clk = "aes2_ick", - .prcm = { - .omap2 = { - .module_offs = CORE_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_AES2_SHIFT, - }, - }, - .class = &omap3xxx_aes_class, -}; - - -static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = { - .master = &omap3xxx_l4_core_hwmod, - .slave = &omap3xxx_aes_hwmod, - .clk = "aes2_ick", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* * 'ssi' class * synchronous serial interface (multichannel and full-duplex serial if) @@ -2473,20 +2435,11 @@ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = { NULL, }; -static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = { - &omap3xxx_l4_core__aes, - NULL, -}; - static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__sham, NULL }; -static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = { - &omap3xxx_l4_core__aes, - NULL -}; /* * Apparently the SHA/MD5 and AES accelerator IP blocks are @@ -2501,11 +2454,6 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = { NULL }; -static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = { - /* &omap3xxx_l4_core__aes, */ - NULL, -}; - /* 3430ES1-only hwmod links */ static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = { &omap3430es1_dss__l3, @@ -2641,7 +2589,6 @@ int __init omap3xxx_hwmod_init(void) { int r; struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL; - struct omap_hwmod_ocp_if **h_aes = NULL; struct device_node *bus; unsigned int rev; @@ -2664,16 +2611,13 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; h_sham = omap34xx_sham_hwmod_ocp_ifs; - h_aes = omap34xx_aes_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; h_sham = am35xx_sham_hwmod_ocp_ifs; - h_aes = am35xx_aes_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; h_sham = omap36xx_sham_hwmod_ocp_ifs; - h_aes = omap36xx_aes_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; @@ -2696,11 +2640,6 @@ int __init omap3xxx_hwmod_init(void) goto put_node; } - if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) { - r = omap_hwmod_register_links(h_aes); - if (r < 0) - goto put_node; - } of_node_put(bus); /* -- cgit v1.2.3 From 01df6238fa95cd7fc9878f42b2fe63cadbfd3a07 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:19 +0200 Subject: ARM: dts: omap: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache-controller@48242000: $nodename:0: 'l2-cache-controller@48242000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 6c2b07f0704d..592feadf16ac 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -71,7 +71,7 @@ interrupt-parent = <&gic>; }; - L2: l2-cache-controller@48242000 { + L2: cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; cache-unified; -- cgit v1.2.3 From 2d62edd65eee124c57ded7bc3f4ae6bcb01ebc55 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:51 +0200 Subject: ARM: dts: am: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache-controller@48242000: $nodename:0: 'l2-cache-controller@48242000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index b4861f70f178..7d9f66ee9ea3 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -153,7 +153,7 @@ clocks = <&mpu_periphclk>; }; - l2-cache-controller@48242000 { + cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; cache-unified; -- cgit v1.2.3 From 4873b668d63360a84615cf0e603824659b62f155 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 11 Jun 2020 10:29:44 -0500 Subject: ARM: dts: am5729-beaglebone-ai: Enable IPU & DSP rprocs Assign the previously added CMA reserved memory nodes to the respective IPU and DSP rproc device nodes, and enable these rproc nodes so that these remote processors can be booted on the AM5729 BeagleBone AI board. The addresses and sizes of the CMA pools are identical to those used on various other TI AM572x/AM574x based boards. The mailboxes, timers and watchdog-timers for all these remoteprocs are inherited by including the common dra72-ipu-dsp-common.dtsi file. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am5729-beagleboneai.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index 9877d7709d41..619e75927224 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -8,6 +8,7 @@ #include "dra74x.dtsi" #include "am57xx-commercial-grade.dtsi" #include "dra74x-mmc-iodelay.dtsi" +#include "dra74-ipu-dsp-common.dtsi" #include #include #include @@ -729,3 +730,23 @@ opp-shared; }; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; + +&dsp2 { + status = "okay"; + memory-region = <&dsp2_memory_region>; +}; -- cgit v1.2.3 From 96cafa00c5e000a760fd1e0fe9ac373331a626e3 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 11 Jun 2020 10:29:45 -0500 Subject: ARM: dts: am5729-beaglebone-ai: Disable ununsed mailboxes The IPU and DSP remote processors use sub-mailbox nodes only from a limited set of System Mailboxes 5 and 6 to achieve the Remote Processor Messaging (RPMsg) communication stack between the MPU host processor and the respective remote processor. These are all defined and enabled through the inherited common dra74-ipu-dsp-common.dtsi file. The other System Mailboxes do not define any actual sub-mailboxes, so they serve no purpose and can all be safely dropped. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am5729-beagleboneai.dts | 52 ------------------------------- 1 file changed, 52 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts index 619e75927224..d3e345d6634a 100644 --- a/arch/arm/boot/dts/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/am5729-beagleboneai.dts @@ -630,58 +630,6 @@ status = "okay"; }; -&mailbox1 { - status = "okay"; -}; - -&mailbox2 { - status = "okay"; -}; - -&mailbox3 { - status = "okay"; -}; - -&mailbox4 { - status = "okay"; -}; - -&mailbox5 { - status = "okay"; -}; - -&mailbox6 { - status = "okay"; -}; - -&mailbox7 { - status = "okay"; -}; - -&mailbox8 { - status = "okay"; -}; - -&mailbox9 { - status = "okay"; -}; - -&mailbox10 { - status = "okay"; -}; - -&mailbox11 { - status = "okay"; -}; - -&mailbox12 { - status = "okay"; -}; - -&mailbox13 { - status = "okay"; -}; - &cpu_alert0 { temperature = <55000>; /* milliCelsius */ }; -- cgit v1.2.3 From ff82009fcc6ace774570107750f5af91c9081b0a Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Wed, 10 Jun 2020 13:02:58 +0200 Subject: ARM: dts: am33xx-l4: add gpio-ranges Add gpio-ranges properties to the gpio controller nodes. These gpio-ranges were created based on "Table 9-10. CONTROL_MODULE REGISTERS" in the "AM335x Technical Reference Manual" [0] and "Table 4-2. Pin Attributes" in the "AM335x Sitara Processor datasheet" [1]. A csv file with this data is available for reference [2]. These mappings are valid for all SoC's that are using am33xx-l4.dtsi. In addition, the only TI AM33xx parts that actually exist are [0]: AM3351, AM3352, AM3354, AM3356, AM3357, AM3358, AM3359 These gpio-ranges properties should be added as they describe the relationship between a gpio line and pin control register that exists in the hardware. For example, GPMC_A0 pin has mode 7 which is labeled gpio1_16. conf_gpmc_a0 register is at offset 840h which makes it pin 16. [0] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf [1] http://www.ti.com/lit/ds/symlink/am3358.pdf [2] https://gist.github.com/pdp7/6ffaddc8867973c1c3e8612cfaf72020 [3] http://www.ti.com/processors/sitara-arm/am335x-cortex-a8/overview.html Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 7ff11d6bf0f2..2c1ec066caeb 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -151,6 +151,18 @@ gpio0: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 82 8>, + <&am33xx_pinmux 8 52 4>, + <&am33xx_pinmux 12 94 4>, + <&am33xx_pinmux 16 71 2>, + <&am33xx_pinmux 18 135 1>, + <&am33xx_pinmux 19 108 2>, + <&am33xx_pinmux 21 73 1>, + <&am33xx_pinmux 22 8 2>, + <&am33xx_pinmux 26 10 2>, + <&am33xx_pinmux 28 74 1>, + <&am33xx_pinmux 29 81 1>, + <&am33xx_pinmux 30 28 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1296,6 +1308,10 @@ gpio1: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1698,6 +1714,9 @@ gpio2: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 34 18>, + <&am33xx_pinmux 18 77 4>, + <&am33xx_pinmux 22 56 10>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1731,6 +1750,11 @@ gpio3: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 66 5>, + <&am33xx_pinmux 5 98 2>, + <&am33xx_pinmux 7 75 2>, + <&am33xx_pinmux 13 141 1>, + <&am33xx_pinmux 14 100 8>; gpio-controller; #gpio-cells = <2>; interrupt-controller; -- cgit v1.2.3 From aafd897a5ac4cb7f9b4f99acc5365a7df1f77aa0 Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Thu, 21 May 2020 22:09:26 +0200 Subject: ARM: dts: am335x-boneblack: add gpio-line-names The BeagleBone Black has P8 and P9 headers [0] which expose many of the AM3358 ZCZ SoC balls to stacking expansion boards called "capes", or to other external connections like jumper wires connected to a breadboard. BeagleBone users will often refer to the "Cape Exanpsion Headers" pin diagram [1] as it is in the "Bone101" getting started tutorial. [2] Most of the P8 and P9 header pins can muxed to a GPIO line. The gpio-line-names describe which P8 or P9 pin that line goes to and the default mux for that P8 or P9 pin if it is not GPIO. For example, gpiochip 1 line 0 is connected to P8 header pin 25 (P8_25) however the default device tree has the corresponding BGA ball (ZCZ U7) muxed to mmc1_dat0 as it is used for the on-board eMMC chip. For that GPIO line to be used, one would need to modify the device tree to disable the eMMC and change the pin mux for that ball to GPIO mode. Some of the AM3358 ZCZ balls corresponding to GPIO lines are not routed to a P8 or P9 header, but are instead wired to some peripheral device like on-board eMMC, HDMI framer IC, or status LEDs. Those names are in brackets to denote those GPIO lines can not be used. Some GPIO lines are named "[NC]" as the corresponding balls are not routed to anything on the PCB. The goal for these names is to make it easier for a user viewing the output of gpioinfo to determine which P8 or P9 pin is connected to a GPIO line. The output of gpioinfo on a BeagleBone Black would be: gpiochip0 - 32 lines: line 0: "[ethernet]" unused input active-high line 1: "[ethernet]" unused input active-high line 2: "P9_22 [spi0_sclk]" unused input active-high line 3: "P9_21 [spi0_d0]" unused input active-high line 4: "P9_18 [spi0_d1]" unused input active-high line 5: "P9_17 [spi0_cs0]" unused input active-high line 6: "[sd card]" "cd" input active-low [used] line 7: "P9_42A [ecappwm0]" unused input active-high line 8: "P8_35 [hdmi]" unused input active-high line 9: "P8_33 [hdmi]" unused input active-high line 10: "P8_31 [hdmi]" unused input active-high line 11: "P8_32 [hdmi]" unused input active-high line 12: "P9_20 [i2c2_sda]" unused input active-high line 13: "P9_19 [i2c2_scl]" unused input active-high line 14: "P9_26 [uart1_rxd]" unused input active-high line 15: "P9_24 [uart1_txd]" unused input active-high line 16: "[ethernet]" unused input active-high line 17: "[ethernet]" unused input active-high line 18: "[usb]" unused input active-high line 19: "[hdmi]" unused input active-high line 20: "P9_41B" unused input active-high line 21: "[ethernet]" unused input active-high line 22: "P8_19 [ehrpwm2a]" unused input active-high line 23: "P8_13 [ehrpwm2b]" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "P8_14" unused input active-high line 27: "P8_17" unused input active-high line 28: "[ethernet]" unused input active-high line 29: "[ethernet]" unused input active-high line 30: "P9_11 [uart4_rxd]" unused input active-high line 31: "P9_13 [uart4_txd]" unused input active-high gpiochip1 - 32 lines: line 0: "P8_25 [emmc]" unused input active-high line 1: "[emmc]" unused input active-high line 2: "P8_5 [emmc]" unused input active-high line 3: "P8_6 [emmc]" unused input active-high line 4: "P8_23 [emmc]" unused input active-high line 5: "P8_22 [emmc]" unused input active-high line 6: "P8_3 [emmc]" unused input active-high line 7: "P8_4 [emmc]" unused input active-high line 8: "[NC]" unused input active-high line 9: "[NC]" unused input active-high line 10: "[NC]" unused input active-high line 11: "[NC]" unused input active-high line 12: "P8_12" unused input active-high line 13: "P8_11" unused input active-high line 14: "P8_16" unused input active-high line 15: "P8_15" unused input active-high line 16: "P9_15A" unused input active-high line 17: "P9_23" unused input active-high line 18: "P9_14 [ehrpwm1a]" unused input active-high line 19: "P9_16 [ehrpwm1b]" unused input active-high line 20: "[emmc]" unused input active-high line 21: "[usr0 led]" "beaglebone:green:heartbeat" output active-high [used] line 22: "[usr1 led]" "beaglebone:green:mmc0" output active-high [used] line 23: "[usr2 led]" "beaglebone:green:usr2" output active-high [used] line 24: "[usr3 led]" "beaglebone:green:usr3" output active-high [used] line 25: "[hdmi]" "interrupt" input active-high [used] line 26: "[usb]" unused input active-high line 27: "[hdmi audio]" "enable" output active-high [used] line 28: "P9_12" unused input active-high line 29: "P8_26" unused input active-high line 30: "P8_21 [emmc]" unused input active-high line 31: "P8_20 [emmc]" unused input active-high gpiochip2 - 32 lines: line 0: "P9_15B" unused input active-high line 1: "P8_18" unused input active-high line 2: "P8_7" unused input active-high line 3: "P8_8" unused input active-high line 4: "P8_10" unused input active-high line 5: "P8_9" unused input active-high line 6: "P8_45 [hdmi]" unused input active-high line 7: "P8_46 [hdmi]" unused input active-high line 8: "P8_43 [hdmi]" unused input active-high line 9: "P8_44 [hdmi]" unused input active-high line 10: "P8_41 [hdmi]" unused input active-high line 11: "P8_42 [hdmi]" unused input active-high line 12: "P8_39 [hdmi]" unused input active-high line 13: "P8_40 [hdmi]" unused input active-high line 14: "P8_37 [hdmi]" unused input active-high line 15: "P8_38 [hdmi]" unused input active-high line 16: "P8_36 [hdmi]" unused input active-high line 17: "P8_34 [hdmi]" unused input active-high line 18: "[ethernet]" unused input active-high line 19: "[ethernet]" unused input active-high line 20: "[ethernet]" unused input active-high line 21: "[ethernet]" unused input active-high line 22: "P8_27 [hdmi]" unused input active-high line 23: "P8_29 [hdmi]" unused input active-high line 24: "P8_28 [hdmi]" unused input active-high line 25: "P8_30 [hdmi]" unused input active-high line 26: "[emmc]" unused input active-high line 27: "[emmc]" unused input active-high line 28: "[emmc]" unused input active-high line 29: "[emmc]" unused input active-high line 30: "[emmc]" unused input active-high line 31: "[emmc]" unused input active-high gpiochip3 - 32 lines: line 0: "[ethernet]" unused input active-high line 1: "[ethernet]" unused input active-high line 2: "[ethernet]" unused input active-high line 3: "[ethernet]" unused input active-high line 4: "[ethernet]" unused input active-high line 5: "[i2c0]" unused input active-high line 6: "[i2c0]" unused input active-high line 7: "[emu]" unused input active-high line 8: "[emu]" unused input active-high line 9: "[ethernet]" unused input active-high line 10: "[ethernet]" unused input active-high line 11: "[NC]" unused input active-high line 12: "[NC]" unused input active-high line 13: "[usb]" unused input active-high line 14: "P9_31 [spi1_sclk]" unused input active-high line 15: "P9_29 [spi1_d0]" unused input active-high line 16: "P9_30 [spi1_d1]" unused input active-high line 17: "P9_28 [spi1_cs0]" unused input active-high line 18: "P9_42B [ecappwm0]" unused input active-high line 19: "P9_27" unused input active-high line 20: "P9_41A" unused input active-high line 21: "P9_25" unused input active-high line 22: "[NC]" unused input active-high line 23: "[NC]" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "[NC]" unused input active-high line 27: "[NC]" unused input active-high line 28: "[NC]" unused input active-high line 29: "[NC]" unused input active-high line 30: "[NC]" unused input active-high line 31: "[NC]" unused input active-high [0] https://git.io/JfgOd [1] https://beagleboard.org/capes [1] https://beagleboard.org/Support/bone101 [2] https://beagleboard.org/static/images/cape-headers.png Reviewed-by: Jason Kridner Reviewed-by: Robert Nelson Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-boneblack.dts | 144 +++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index d3928662aed4..5f31e832eb82 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -23,3 +23,147 @@ opp-supported-hw = <0x06 0x0100>; }; }; + +&gpio0 { + gpio-line-names = + "[ethernet]", + "[ethernet]", + "P9_22 [spi0_sclk]", + "P9_21 [spi0_d0]", + "P9_18 [spi0_d1]", + "P9_17 [spi0_cs0]", + "[sd card]", + "P9_42A [ecappwm0]", + "P8_35 [hdmi]", + "P8_33 [hdmi]", + "P8_31 [hdmi]", + "P8_32 [hdmi]", + "P9_20 [i2c2_sda]", + "P9_19 [i2c2_scl]", + "P9_26 [uart1_rxd]", + "P9_24 [uart1_txd]", + "[ethernet]", + "[ethernet]", + "[usb]", + "[hdmi]", + "P9_41B", + "[ethernet]", + "P8_19 [ehrpwm2a]", + "P8_13 [ehrpwm2b]", + "[NC]", + "[NC]", + "P8_14", + "P8_17", + "[ethernet]", + "[ethernet]", + "P9_11 [uart4_rxd]", + "P9_13 [uart4_txd]"; +}; + +&gpio1 { + gpio-line-names = + "P8_25 [emmc]", + "[emmc]", + "P8_5 [emmc]", + "P8_6 [emmc]", + "P8_23 [emmc]", + "P8_22 [emmc]", + "P8_3 [emmc]", + "P8_4 [emmc]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "P8_12", + "P8_11", + "P8_16", + "P8_15", + "P9_15A", + "P9_23", + "P9_14 [ehrpwm1a]", + "P9_16 [ehrpwm1b]", + "[emmc]", + "[usr0 led]", + "[usr1 led]", + "[usr2 led]", + "[usr3 led]", + "[hdmi]", + "[usb]", + "[hdmi audio]", + "P9_12", + "P8_26", + "P8_21 [emmc]", + "P8_20 [emmc]"; +}; + +&gpio2 { + gpio-line-names = + "P9_15B", + "P8_18", + "P8_7", + "P8_8", + "P8_10", + "P8_9", + "P8_45 [hdmi]", + "P8_46 [hdmi]", + "P8_43 [hdmi]", + "P8_44 [hdmi]", + "P8_41 [hdmi]", + "P8_42 [hdmi]", + "P8_39 [hdmi]", + "P8_40 [hdmi]", + "P8_37 [hdmi]", + "P8_38 [hdmi]", + "P8_36 [hdmi]", + "P8_34 [hdmi]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "P8_27 [hdmi]", + "P8_29 [hdmi]", + "P8_28 [hdmi]", + "P8_30 [hdmi]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]", + "[emmc]"; +}; + +&gpio3 { + gpio-line-names = + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[ethernet]", + "[i2c0]", + "[i2c0]", + "[emu]", + "[emu]", + "[ethernet]", + "[ethernet]", + "[NC]", + "[NC]", + "[usb]", + "P9_31 [spi1_sclk]", + "P9_29 [spi1_d0]", + "P9_30 [spi1_d1]", + "P9_28 [spi1_cs0]", + "P9_42B [ecappwm0]", + "P9_27", + "P9_41A", + "P9_25", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]"; +}; -- cgit v1.2.3 From e14d2c766392ff1f226017fd62f0b6283a53bd0c Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Thu, 18 Jun 2020 20:29:21 +0200 Subject: ARM: dts: am335x-pocketbeagle: add gpio-line-names The BeagleBoard.org PocketBeagle has P1 and P2 headers [0] which expose many of the TI AM3358 SoC balls to stacking expansion boards called "capes", or to other external connections like jumper wires connected to a breadboard. Note: the AM3358 die is actually embedded inside of the OSD335x-SM System-in-Package (SiP) [1] but that is irrelevant to the gpio driver. Many of the P1 and P2 header pins can muxed to a GPIO line. The gpio-line-names describe which P1 or P2 pin that line goes to and the default mux for that P1 or P2 pin if it is not GPIO. Some GPIO lines are named "[NC]" as the corresponding balls are not routed to anything on the PCB. The goal for these names is to make it easier for a user viewing the output of gpioinfo to determine which P1 or P2 pin is connected to a GPIO line. The output of gpioinfo on a PocketBeagle would be: gpiochip0 - 32 lines: line 0: "[NC]" unused input active-high line 1: "[NC]" unused input active-high line 2: "P1.08 [SPI0_CLK]" unused input active-high line 3: "P1.10 [SPI0_MISO]" unused input active-high line 4: "P1.12 [SPI0_MOSI]" unused input active-high line 5: "P1.06 [SPI0_CS]" unused input active-high line 6: "[MMC0_CD]" "cd" input active-low [used] line 7: "P2.29 [SPI1_CLK]" unused input active-high line 8: "[SYSBOOT]" unused input active-high line 9: "[SYSBOOT]" unused input active-high line 10: "[SYSBOOT]" unused input active-high line 11: "[SYSBOOT]" unused input active-high line 12: "P1.26 [I2C2_SDA]" unused input active-high line 13: "P1.28 [I2C2_SCL]" unused input active-high line 14: "P2.11 [I2C1_SDA]" unused input active-high line 15: "P2.09 [I2C1_SCL]" unused input active-high line 16: "[NC]" unused input active-high line 17: "[NC]" unused input active-high line 18: "[NC]" unused input active-high line 19: "P2.31 [SPI1_CS]" unused input active-high line 20: "P1.20 [PRU0.16]" unused input active-high line 21: "[NC]" unused input active-high line 22: "[NC]" unused input active-high line 23: "P2.03" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "P1.34" unused input active-high line 27: "P2.19" unused input active-high line 28: "[NC]" unused input active-high line 29: "[NC]" unused input active-high line 30: "P2.05 [UART4_RX]" unused input active-high line 31: "P2.07 [UART4_TX]" unused input active-high gpiochip1 - 32 lines: line 0: "[NC]" unused input active-high line 1: "[NC]" unused input active-high line 2: "[NC]" unused input active-high line 3: "[NC]" unused input active-high line 4: "[NC]" unused input active-high line 5: "[NC]" unused input active-high line 6: "[NC]" unused input active-high line 7: "[NC]" unused input active-high line 8: "[NC]" unused input active-high line 9: "P2.25 [SPI1_MOSI]" unused input active-high line 10: "P1.32 [UART0_RX]" unused input active-high line 11: "P1.30 [UART0_TX]" unused input active-high line 12: "P2.24" unused input active-high line 13: "P2.33" unused input active-high line 14: "P2.22" unused input active-high line 15: "P2.18" unused input active-high line 16: "[NC]" unused input active-high line 17: "[NC]" unused input active-high line 18: "P2.01 [PWM1A]" unused input active-high line 19: "[NC]" unused input active-high line 20: "P2.10" unused input active-high line 21: "[USR LED 0]" "beaglebone:green:usr0" output active-high [used] line 22: "[USR LED 1]" "beaglebone:green:usr1" output active-high [used] line 23: "[USR LED 2]" "beaglebone:green:usr2" output active-high [used] line 24: "[USR LED 3]" "beaglebone:green:usr3" output active-high [used] line 25: "P2.06" unused input active-high line 26: "P2.04" unused input active-high line 27: "P2.02" unused input active-high line 28: "P2.08" unused input active-high line 29: "[NC]" unused input active-high line 30: "[NC]" unused input active-high line 31: "[NC]" unused input active-high gpiochip2 - 32 lines: line 0: "P2.20" unused input active-high line 1: "P2.17" unused input active-high line 2: "[NC]" unused input active-high line 3: "[NC]" unused input active-high line 4: "[NC]" unused input active-high line 5: "[EEPROM_WP]" unused input active-high line 6: "[SYSBOOT]" unused input active-high line 7: "[SYSBOOT]" unused input active-high line 8: "[SYSBOOT]" unused input active-high line 9: "[SYSBOOT]" unused input active-high line 10: "[SYSBOOT]" unused input active-high line 11: "[SYSBOOT]" unused input active-high line 12: "[SYSBOOT]" unused input active-high line 13: "[SYSBOOT]" unused input active-high line 14: "[SYSBOOT]" unused input active-high line 15: "[SYSBOOT]" unused input active-high line 16: "[SYSBOOT]" unused input active-high line 17: "[SYSBOOT]" unused input active-high line 18: "[NC]" unused input active-high line 19: "[NC]" unused input active-high line 20: "[NC]" unused input active-high line 21: "[NC]" unused input active-high line 22: "P2.35 [AIN5]" unused input active-high line 23: "P1.02 [AIN6]" unused input active-high line 24: "P1.35 [PRU1.10]" unused input active-high line 25: "P1.04 [PRU1.11]" unused input active-high line 26: "[MMC0_DAT3]" unused input active-high line 27: "[MMC0_DAT2]" unused input active-high line 28: "[MMC0_DAT1]" unused input active-high line 29: "[MMC0_DAT0]" unused input active-high line 30: "[MMC0_CLK]" unused input active-high line 31: "[MMC0_CMD]" unused input active-high gpiochip3 - 32 lines: line 0: "[NC]" unused input active-high line 1: "[NC]" unused input active-high line 2: "[NC]" unused input active-high line 3: "[NC]" unused input active-high line 4: "[NC]" unused input active-high line 5: "[I2C0_SDA]" unused input active-high line 6: "[I2C0_SCL]" unused input active-high line 7: "[JTAG]" unused input active-high line 8: "[JTAG]" unused input active-high line 9: "[NC]" unused input active-high line 10: "[NC]" unused input active-high line 11: "[NC]" unused input active-high line 12: "[NC]" unused input active-high line 13: "P1.03 [USB1]" unused input active-high line 14: "P1.36 [PWM0A]" unused input active-high line 15: "P1.33 [PRU0.1]" unused input active-high line 16: "P2.32 [PRU0.2]" unused input active-high line 17: "P2.30 [PRU0.3]" unused input active-high line 18: "P1.31 [PRU0.4]" unused input active-high line 19: "P2.34 [PRU0.5]" unused input active-high line 20: "P2.28 [PRU0.6]" unused input active-high line 21: "P1.29 [PRU0.7]" unused input active-high line 22: "[NC]" unused input active-high line 23: "[NC]" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "[NC]" unused input active-high line 27: "[NC]" unused input active-high line 28: "[NC]" unused input active-high line 29: "[NC]" unused input active-high line 30: "[NC]" unused input active-high line 31: "[NC]" unused input active-high [0] https://github.com/beagleboard/pocketbeagle/wiki/System-Reference-Manual#71_Expansion_Header_Connectors [1] https://octavosystems.com/app_notes/osd335x-family-pin-assignments/ Reviewed-by: Jason Kridner Reviewed-by: Robert Nelson Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-pocketbeagle.dts | 144 ++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 4da719098028..e08b5f73ccb5 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -59,6 +59,150 @@ }; }; +&gpio0 { + gpio-line-names = + "[NC]", + "[NC]", + "P1.08 [SPI0_CLK]", + "P1.10 [SPI0_MISO]", + "P1.12 [SPI0_MOSI]", + "P1.06 [SPI0_CS]", + "[MMC0_CD]", + "P2.29 [SPI1_CLK]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "P1.26 [I2C2_SDA]", + "P1.28 [I2C2_SCL]", + "P2.11 [I2C1_SDA]", + "P2.09 [I2C1_SCL]", + "[NC]", + "[NC]", + "[NC]", + "P2.31 [SPI1_CS]", + "P1.20 [PRU0.16]", + "[NC]", + "[NC]", + "P2.03", + "[NC]", + "[NC]", + "P1.34", + "P2.19", + "[NC]", + "[NC]", + "P2.05 [UART4_RX]", + "P2.07 [UART4_TX]"; +}; + +&gpio1 { + gpio-line-names = + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "P2.25 [SPI1_MOSI]", + "P1.32 [UART0_RX]", + "P1.30 [UART0_TX]", + "P2.24", + "P2.33", + "P2.22", + "P2.18", + "[NC]", + "[NC]", + "P2.01 [PWM1A]", + "[NC]", + "P2.10", + "[USR LED 0]", + "[USR LED 1]", + "[USR LED 2]", + "[USR LED 3]", + "P2.06", + "P2.04", + "P2.02", + "P2.08", + "[NC]", + "[NC]", + "[NC]"; +}; + +&gpio2 { + gpio-line-names = + "P2.20", + "P2.17", + "[NC]", + "[NC]", + "[NC]", + "[EEPROM_WP]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[SYSBOOT]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "P2.35 [AIN5]", + "P1.02 [AIN6]", + "P1.35 [PRU1.10]", + "P1.04 [PRU1.11]", + "[MMC0_DAT3]", + "[MMC0_DAT2]", + "[MMC0_DAT1]", + "[MMC0_DAT0]", + "[MMC0_CLK]", + "[MMC0_CMD]"; +}; + +&gpio3 { + gpio-line-names = + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[I2C0_SDA]", + "[I2C0_SCL]", + "[JTAG]", + "[JTAG]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "P1.03 [USB1]", + "P1.36 [PWM0A]", + "P1.33 [PRU0.1]", + "P2.32 [PRU0.2]", + "P2.30 [PRU0.3]", + "P1.31 [PRU0.4]", + "P2.34 [PRU0.5]", + "P2.28 [PRU0.6]", + "P1.29 [PRU0.7]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]", + "[NC]"; +}; + &am33xx_pinmux { i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < -- cgit v1.2.3 From 00e3f891cab410cd7a88289ec811ed863d842ba4 Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Sat, 27 Jun 2020 00:38:08 +0530 Subject: arm64: dts: qcom: sc7180: Add cpu OPP tables Add OPP tables required to scale DDR/L3 per freq-domain on SC7180 SoCs. Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200626190808.8716-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 160 +++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index ad57df278a79..2be81a2a1512 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -130,6 +131,9 @@ &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -153,6 +157,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { @@ -172,6 +179,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { @@ -191,6 +201,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { @@ -210,6 +223,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_400: l2-cache { @@ -229,6 +245,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_500: l2-cache { @@ -248,6 +267,9 @@ capacity-dmips-mhz = <1740>; dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { @@ -267,6 +289,9 @@ capacity-dmips-mhz = <1740>; dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; L2_700: l2-cache { @@ -366,6 +391,141 @@ }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp2: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp3: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp4: opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <1804000 8908800>; + }; + + cpu0_opp5: opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp6: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp7: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu6_opp_table: cpu6_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu6_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp2: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp3: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp4: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp5: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp6: opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <4068000 12902400>; + }; + + cpu6_opp7: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu6_opp8: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp9: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp10: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp11: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp12: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp13: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp14: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp15: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 23347200>; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ -- cgit v1.2.3 From e4bfde13e323f9ee5f2f38aa5cac0676dd656f8e Mon Sep 17 00:00:00 2001 From: Shunqian Zheng Date: Fri, 3 Apr 2020 13:15:37 -0300 Subject: arm64: dts: rockchip: add rx0 mipi-phy for rk3399 Designware MIPI D-PHY, used for ISP0 in rk3399. Verified with: make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml Signed-off-by: Shunqian Zheng Signed-off-by: Jacob Chen Signed-off-by: Helen Koike Link: https://lore.kernel.org/r/20200403161538.1375908-9-helen.koike@collabora.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 781b5c2cdb4d..f2ef0d8ba54b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1397,6 +1397,17 @@ status = "disabled"; }; + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + status = "disabled"; + }; + u2phy0: usb2-phy@e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; -- cgit v1.2.3 From 809cc579083f63742739bc4ff7415e8720ceac99 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 12:19:41 -0700 Subject: arm64: dts: qcom: qcs404: Add IMEM and PIL info region Add a simple-mfd representing IMEM on QCS404 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20200622191942.255460-5-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index c685a1664810..b654b802e95c 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1097,6 +1097,21 @@ status = "disabled"; }; + imem@8600000 { + compatible = "simple-mfd"; + reg = <0x08600000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x08600000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; -- cgit v1.2.3 From 948f6161c6ab7f66cda77cfcd7b43b4270c9f497 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 12:19:42 -0700 Subject: arm64: dts: qcom: sdm845: Add IMEM and PIL info region Add a simple-mfd representing IMEM on SDM845 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Reviewed-by: Stephen Boyd Reviewed-by: Vinod Koul Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20200622191942.255460-6-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 8eb5a31346d2..fee50d979dc3 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3724,6 +3724,21 @@ cell-index = <0>; }; + imem@146bf000 { + compatible = "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; -- cgit v1.2.3 From a6a22f82c90dab8966fc07bd7e798a0680803995 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Thu, 2 Jul 2020 10:14:31 +0200 Subject: arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for display. Backlight levels curve was optimized by Martijn Braam using a lux meter. Add its device nodes. Signed-off-by: Icenowy Zheng Signed-off-by: Martijn Braam Signed-off-by: Ondrej Jirman Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20200702081432.1727696-2-megous@megous.com Signed-off-by: Maxime Ripard --- .../dts/allwinner/sun50i-a64-pinephone-1.1.dts | 19 +++++++++++++ .../boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 33 ++++++++++++++++++++++ 2 files changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts index 06a775c41664..3e99a87e9ce5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts @@ -9,3 +9,22 @@ model = "Pine64 PinePhone Braveheart (1.1)"; compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; }; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since + * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight + * being off is around 20%. Duty cycle for the lowest brightness level + * also varries quite a bit between individual boards, so the lowest + * value here was chosen as a safe default. + */ + brightness-levels = < + 774 793 814 842 + 882 935 1003 1088 + 1192 1316 1462 1633 + 1830 2054 2309 2596 + 2916 3271 3664 4096>; + num-interpolated-steps = <50>; + default-brightness-level = <400>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index cefda145c3c9..a89425ad3727 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -16,6 +16,13 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + /* Backlight configuration differs per PinePhone revision. */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -84,6 +91,28 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + status = "okay"; + + panel@0 { + compatible = "xingbangda,xbd599"; + reg = <0>; + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ + iovcc-supply = <®_dldo2>; + vcc-supply = <®_ldo_io0>; + backlight = <&backlight>; + }; +}; + &ehci0 { status = "okay"; }; @@ -188,6 +217,10 @@ */ }; +&r_pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; -- cgit v1.2.3 From 60f2de5ffbf0ed7c0d9789bcc196884427e8cff5 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Thu, 2 Jul 2020 10:14:32 +0200 Subject: arm64: dts: sun50i-a64-pinephone: Add touchscreen support Pinephone has a Goodix GT917S capacitive touchscreen controller on I2C0 bus. Add support for it. Signed-off-by: Ondrej Jirman Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20200702081432.1727696-3-megous@megous.com [Maxime: Removed the redundant pinctrl nodes] Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index a89425ad3727..a3b400ff972b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -121,6 +121,23 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt917s"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + AVDD28-supply = <®_ldo_io0>; + VDDIO-supply = <®_ldo_io0>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &i2c1 { status = "okay"; -- cgit v1.2.3 From 01ff9ff323665c7a4aa13972a337291bf2d8d24b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 22:59:48 +0200 Subject: ARM: dts: exynos: Fix missing empty reg/ranges property regulators on Trats Remove the regulators node entirely because its children do not have any unit addresses. This fixes DTC warning: Warning (simple_bus_reg): /regulators/regulator-0: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski --- arch/arm/boot/dts/exynos4210-trats.dts | 98 ++++++++++++++++------------------ 1 file changed, 47 insertions(+), 51 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 3d791db6095c..5cc96f04a4fa 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -30,62 +30,58 @@ stdout-path = "serial2:115200n8"; }; - regulators { - compatible = "simple-bus"; - - vemmc_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vemmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - tsp_reg: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "TSP_FIXED_VOLTAGES"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + tsp_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - cam_af_28v_reg: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "8M_AF_2.8V_EN"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + cam_af_28v_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "8M_AF_2.8V_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - cam_io_en_reg: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "CAM_IO_EN"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + cam_io_en_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_IO_EN"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - cam_io_12v_reg: regulator-4 { - compatible = "regulator-fixed"; - regulator-name = "8M_1.2V_EN"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + cam_io_12v_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "8M_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vt_core_15v_reg: regulator-5 { - compatible = "regulator-fixed"; - regulator-name = "VT_CORE_1.5V"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vt_core_15v_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VT_CORE_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; gpio-keys { -- cgit v1.2.3 From dac95cef46ad73562d8f6e1d1f6b4f77fed98f01 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 2 Jul 2020 17:51:43 +0200 Subject: arm64: dts: exynos: Describe PWM interrupts on Exynos7 Add interrupts property to PWM node on Exynos7 to describe the hardware fully. No functional change as the interrupts are not used by drivers. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar --- arch/arm64/boot/dts/exynos/exynos7.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 300ad7326ea8..e83ecf026730 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -581,6 +581,11 @@ pwm: pwm@136c0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x136c0000 0x100>; + interrupts = , + , + , + , + ; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; clocks = <&clock_peric0 PCLK_PWM>; -- cgit v1.2.3 From 114c9604a59de6f9bbd75964582b6550d314956a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 2 Jul 2020 17:51:44 +0200 Subject: arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible The ARM PMU node is described enough with first compatible so remove the arm,armv8-pmuv3 to fix dtschema warnings like: arm-pmu: compatible: Additional items are not allowed ('arm,armv8-pmuv3' was unexpected) arm-pmu: compatible: ['arm,cortex-a57-pmu', 'arm,armv8-pmuv3'] is too long Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar Tested-by: Alim Akhtar --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 4 ++-- arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 6721966140f4..8ced37d20fdb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -24,7 +24,7 @@ interrupt-parent = <&gic>; arm_a53_pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = , , , @@ -33,7 +33,7 @@ }; arm_a57_pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = , , , diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index e83ecf026730..3f82eeb2c58f 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -29,7 +29,7 @@ }; arm-pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = , , , -- cgit v1.2.3 From e53568caa25c530a0fc4e3c2e1c275119fba7f91 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Fri, 3 Jul 2020 21:48:41 +0200 Subject: arm64: dts: allwinner: Add support for PinePhone revision 1.2 Revision 1.2 should be the final production version of the PinePhone. It has most of the known HW quirks fixed. Interrupt to the magnetometer is routed correctly, in this revision. The bulk of the changes are in how modem and the USB-C HDMI bridge chip is powered and where the signals from the modem are connected. Also backlight intensity seemingly behaves differently, than on the 1.1 and 1.0 boards, and the PWM duty cycle where backlight starts to work is 10% (as tested on 2 1.2 PinePhones I have access to). Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20200703194842.111845-3-megous@megous.com Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../dts/allwinner/sun50i-a64-pinephone-1.2.dts | 40 ++++++++++++++++++++++ .../boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 2 +- 3 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index e4d3cd0ac5bb..916d10d5b87c 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts new file mode 100644 index 000000000000..a9f5b670c9b8 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone (1.2)"; + compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; +}; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since 1.0, + * and the lowest PWM duty cycle that doesn't lead to backlight being off + * is around 10%. Duty cycle for the lowest brightness level also varries + * quite a bit between individual boards, so the lowest value here was + * chosen as a safe default. + */ + brightness-levels = < + 5000 5248 5506 5858 6345 + 6987 7805 8823 10062 11543 + 13287 15317 17654 20319 23336 + 26724 30505 34702 39335 44427 + 50000 + >; + num-interpolated-steps = <50>; + default-brightness-level = <500>; +}; + +&lis3mdl { + /* + * Board revision 1.2 fixed routing of the interrupt to DRDY pin, + * enable interrupts. + */ + interrupt-parent = <&pio>; + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index a3b400ff972b..904122711a89 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -142,7 +142,7 @@ status = "okay"; /* Magnetometer */ - lis3mdl@1e { + lis3mdl: lis3mdl@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; -- cgit v1.2.3 From 86be5c789690eb08656b08c072c50a7b02bf41f1 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Fri, 3 Jul 2020 21:48:42 +0200 Subject: arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V Some outputs from the RTL8723CS are connected to the PL port (BT_WAKE_AP), which runs at 1.8V. When BT_WAKE_AP is high, the PL pin this signal is connected to is overdriven, and the whole PL port's voltage rises somewhat. This results in changing voltage on the R_PWM pin (PL10), which is the cause for backlight flickering very noticeably when typing on a Bluetooth keyboard, because backlight intensity is highly sensitive to the voltage of the R_PWM pin. Limit the maximum WiFi/BT I/O voltage to 1.8V to avoid overdriving the PL port pins via BT and WiFi IO port signals. WiFi and BT functionality is unaffected by this change. This completely stops the backlight flicker when using bluetooth. Fixes: 91f480d40942 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone") Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20200703194842.111845-4-megous@megous.com Signed-off-by: Maxime Ripard --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 904122711a89..25150aba749d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -329,7 +329,7 @@ ®_dldo4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-name = "vcc-wifi-io"; }; -- cgit v1.2.3 From 25c6f3960764b266a609281341f889a06d045039 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 11 Jun 2020 11:23:17 +0200 Subject: ARM: dts: bcm2711: Add HDMI DVP Now that we have a driver for the DVP, let's add its DT node. Signed-off-by: Maxime Ripard Signed-off-by: Nicolas Saenz Julienne Link: https://lore.kernel.org/r/e22222ca7f41b960e9bb1a31e0dd2de95b8c0cd1.1591867332.git-series.maxime@cerno.tech --- arch/arm/boot/dts/bcm2711.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index a91cf68e3c4c..00bcaed1be32 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -12,6 +12,13 @@ interrupt-parent = <&gicv2>; + clk_108MHz: clk-108M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <108000000>; + clock-output-names = "108MHz-clock"; + }; + soc { /* * Defined ranges: @@ -244,6 +251,14 @@ hvs@7e400000 { interrupts = ; }; + + dvp: clock@7ef00000 { + compatible = "brcm,brcm2711-dvp"; + reg = <0x7ef00000 0x10>; + clocks = <&clk_108MHz>; + #clock-cells = <1>; + #reset-cells = <1>; + }; }; /* -- cgit v1.2.3 From 99e5a32902d9e144568add5dd8791aa66a69f0bf Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 8 Jun 2020 11:37:33 +0200 Subject: ARM: dts: BCM5301X: Specify switch ports for Luxul devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All those devices use standard BCM53011 (rev 5) or BCM53012 (rev 0). Signed-off-by: Rafał Miłecki Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 25 +++++++++++++++ arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 20 ++++++++++++ arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 20 ++++++++++++ arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 40 ++++++++++++++++++++++++ arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 25 +++++++++++++++ arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 20 ++++++++++++ arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 40 ++++++++++++++++++++++++ arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 40 ++++++++++++++++++++++++ 8 files changed, 230 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts index e58c8077be1d..810fc32f1895 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts @@ -60,3 +60,28 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "poe"; + }; + + port@4 { + reg = <4>; + label = "lan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 766db617455b..7604b4480bb1 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -67,3 +67,23 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + label = "lan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts index b9d95011637d..1ec655809e57 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts @@ -60,3 +60,23 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + label = "poe"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 0052e1b24130..04bfd58127fc 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -108,3 +108,43 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts index b47fb0700a1f..068e384b8ab7 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts @@ -54,3 +54,28 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "poe"; + }; + + port@1 { + reg = <1>; + label = "lan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 334325390aed..67a5982af9c9 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -51,3 +51,23 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index ac7515423474..a21b2d185596 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -103,3 +103,43 @@ &usb3_phy { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 6d28b7dacd05..4d5c5aa7dc42 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -74,3 +74,43 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; -- cgit v1.2.3 From c4f294fd2fd23376cbafd277c672053e38e76e5d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:46 +0200 Subject: ARM: dts: bcm: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache@22000: $nodename:0: 'l2-cache@22000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Acked-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +- arch/arm/boot/dts/bcm-hr2.dtsi | 2 +- arch/arm/boot/dts/bcm-nsp.dtsi | 2 +- arch/arm/boot/dts/bcm21664.dtsi | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 1bc45cfd5453..35bdd0969f0a 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -91,7 +91,7 @@ <0x20100 0x100>; }; - L2: l2-cache@22000 { + L2: cache-controller@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 5e5f5ca3c86f..cbebed5f050e 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -104,7 +104,7 @@ <0x20100 0x100>; }; - L2: l2-cache@22000 { + L2: cache-controller@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index da6d70f09ef1..1c4a46e350e3 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -122,7 +122,7 @@ <0x20100 0x100>; }; - L2: l2-cache@22000 { + L2: cache-controller@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 3cf66faf3b56..58ec1b2f8ef6 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -90,7 +90,7 @@ reg-io-width = <4>; }; - L2: l2-cache@3ff20000 { + L2: cache-controller@3ff20000 { compatible = "arm,pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; -- cgit v1.2.3 From b072714bfc0e42c984b8fd6e069f3ca17de8137a Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Sun, 5 Jul 2020 12:39:17 +0530 Subject: arm64: dts: exynos: Fix silent hang after boot on Espresso Once regulators are disabled after kernel boot, on Espresso board silent hang observed because of LDO7 being disabled. LDO7 actually provide power to CPU cores and non-cpu blocks circuitries. Keep this regulator always-on to fix this hang. Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso") Signed-off-by: Alim Akhtar Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 790f12ca8981..bb86950032d3 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -157,6 +157,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1150000>; regulator-enable-ramp-delay = <125>; + regulator-always-on; }; ldo8_reg: LDO8 { -- cgit v1.2.3 From a7a84ea9c3e3793c44819fe47a64ab9b29162e0a Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Sun, 5 Jul 2020 12:39:18 +0530 Subject: arm64: dts: exynos: Keep LDO12 always-on on Espresso LDO12 on Exynos7 Espresso board supplies power to VDDQ_UFS20_RESET, in case this regulator is OFF, UFS host controller can not send command to UFS device. To keep this supply ON, set regulator-always-on property for this LDO. Signed-off-by: Alim Akhtar Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index bb86950032d3..92fecc539c6c 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -194,6 +194,7 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1300000>; regulator-enable-ramp-delay = <125>; + regulator-always-on; }; ldo13_reg: LDO13 { -- cgit v1.2.3 From 788f2ff795919a9f8f55f61bf749bfa7a785ce0a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 2 Jul 2020 17:51:45 +0200 Subject: arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Alim Akhtar --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 47 +++++++++++++----------------- arch/arm64/boot/dts/exynos/exynos7.dtsi | 47 +++++++++++++----------------- 2 files changed, 40 insertions(+), 54 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 8ced37d20fdb..5665ec4d1851 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -1756,33 +1756,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@15610000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x15610000 0x1000>; - interrupts = ; - clocks = <&cmu_fsys CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@15600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x15600000 0x1000>; - interrupts = ; - clocks = <&cmu_fsys CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@15610000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15610000 0x1000>; + interrupts = ; + clocks = <&cmu_fsys CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@15600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15600000 0x1000>; + interrupts = ; + clocks = <&cmu_fsys CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; audio-subsystem@11400000 { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 3f82eeb2c58f..21da0d82d40b 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -105,33 +105,26 @@ <0x11006000 0x2000>; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@10e10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10E10000 0x1000>; - interrupts = ; - clocks = <&clock_fsys0 ACLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@10eb0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10EB0000 0x1000>; - interrupts = ; - clocks = <&clock_fsys0 ACLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@10e10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10E10000 0x1000>; + interrupts = ; + clocks = <&clock_fsys0 ACLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@10eb0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10EB0000 0x1000>; + interrupts = ; + clocks = <&clock_fsys0 ACLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; clock_topc: clock-controller@10570000 { -- cgit v1.2.3 From 0eaecd29af2fae4b1ff6fe4aabadcbeb4ab1d519 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 21:33:37 +0200 Subject: arm64: dts: exynos: Add unit address to soc node on Exynos5433 Add @0 unit address to 'soc' node match its 'reg' property and silence DTC warning: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski --- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 5665ec4d1851..74ac4ac75865 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -256,7 +256,7 @@ cpu_on = <0xC4000003>; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 229134cc51d739bc99264ee14b7a783d479ce205 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 21:33:38 +0200 Subject: arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7 Add @0 unit address to 'soc' node match its 'reg' property and move the thermal zones out of 'soc' to main root as it this is usually not a property of a Soc. This silences DTC warnings: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name Warning (simple_bus_reg): /soc/thermal-zones: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos7.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 21da0d82d40b..b9ed6a33e290 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -83,7 +83,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -595,15 +595,6 @@ #thermal-sensor-cells = <0>; }; - thermal-zones { - atlas_thermal: cluster0-thermal { - polling-delay-passive = <0>; /* milliseconds */ - polling-delay = <0>; /* milliseconds */ - thermal-sensors = <&tmuctrl_0>; - #include "exynos7-trip-points.dtsi" - }; - }; - ufs: ufs@15570000 { compatible = "samsung,exynos7-ufs"; reg = <0x15570000 0x100>, /* 0: HCI standard */ @@ -673,6 +664,15 @@ }; }; + thermal-zones { + atlas_thermal: cluster0-thermal { + polling-delay-passive = <0>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + thermal-sensors = <&tmuctrl_0>; + #include "exynos7-trip-points.dtsi" + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = Date: Sun, 5 Jul 2020 20:17:54 +0200 Subject: ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski Tested-by: Marek Szyprowski Reviewed-by: Alim Akhtar --- arch/arm/boot/dts/exynos3250.dtsi | 47 ++++----- arch/arm/boot/dts/exynos4.dtsi | 70 ++++++------- arch/arm/boot/dts/exynos4210-universal_c210.dts | 28 ++--- arch/arm/boot/dts/exynos5250.dtsi | 92 ++++++++--------- arch/arm/boot/dts/exynos5410.dtsi | 46 ++++----- arch/arm/boot/dts/exynos5420.dtsi | 130 +++++++++++------------- 6 files changed, 187 insertions(+), 226 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 044e5da64a76..d3fb45a56527 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -418,33 +418,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = ; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = ; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = ; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = ; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; adc: adc@126c0000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index d2779a790ce3..a1e54449f33f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -669,45 +669,37 @@ status = "disabled"; }; - amba: amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma1: mdma@12850000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12850000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma1: mdma@12850000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12850000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; fimd: fimd@11c00000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 02fde1a75ebd..99ce53b120ac 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -181,20 +181,6 @@ }; }; -&amba { - mdma0: mdma@12840000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12840000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - power-domains = <&pd_lcd0>; - }; -}; - &camera { status = "okay"; @@ -616,6 +602,20 @@ /delete-property/dma-names; }; +&soc { + mdma0: mdma@12840000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12840000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + power-domains = <&pd_lcd0>; + }; +}; + &sysram { smp-sram@0 { status = "disabled"; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b6135af7ef39..e3dbe4166836 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -679,56 +679,48 @@ samsung,pmureg-phandle = <&pmu_system_controller>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; }; gsc_0: gsc@13e00000 { diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 2eab80bf5f3a..abe75b9e39f5 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -189,34 +189,26 @@ interrupts = ; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121a0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121a0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121b0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121b0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; audi2s0: i2s@3830000 { diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b672080e7469..c76460b70532 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -433,76 +433,68 @@ power-domains = <&mau_pd>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - adma: adma@3880000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x03880000 0x1000>; - interrupts = ; - clocks = <&clock_audss EXYNOS_ADMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; - power-domains = <&mau_pd>; - }; - - pdma0: pdma@121a0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121b0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = ; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; + adma: adma@3880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = ; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + power-domains = <&mau_pd>; + }; - mdma1: mdma@11c10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = ; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in - * the kernel for boards that run in secure - * mode, we are getting imprecise external - * aborts causing the kernel to oops. - */ - status = "disabled"; - }; + pdma0: pdma@121a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121b0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = ; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11c10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = ; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in + * the kernel for boards that run in secure + * mode, we are getting imprecise external + * aborts causing the kernel to oops. + */ + status = "disabled"; }; i2s0: i2s@3830000 { -- cgit v1.2.3 From 2999f0a9ef71d4d5d88b8a3fa298d14cfc4bad26 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 3 Jul 2020 20:44:49 +0200 Subject: ARM: dts: exynos: Define fixed regulators in root node for consistency in Origen Remove the regulators node and define fixed regulators directly under the root node. This makes Exynos4412 Origen board consistent with other Exynos boards. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-origen.dts | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index dc865be40751..8b11ad391252 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -33,20 +33,13 @@ reg = <0x0203F000 0x1000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - mmc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + mmc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; }; display-timings { -- cgit v1.2.3 From 93be8759895d27d9dea5c197e9a9cba39b6f13fe Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 3 Jul 2020 20:44:50 +0200 Subject: ARM: dts: exynos: Define fixed regulators in root node for consistency in Arndale Remove the regulators node and define fixed regulators directly under the root node. This makes Exynos5250 Arndale board consistent with other Exynos boards. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5250-arndale.dts | 86 ++++++++++++++------------------ 1 file changed, 37 insertions(+), 49 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index c4cc7611898c..59872d83da6e 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -84,60 +84,48 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - main_dc_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "MAIN_DC"; - regulator-always-on; - }; + main_dc_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "MAIN_DC"; + regulator-always-on; + }; - mmc_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_MMC"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; + mmc_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_MMC"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; - reg_hdmi_en: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "hdmi-en"; - regulator-always-on; - }; + reg_hdmi_en: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "hdmi-en"; + regulator-always-on; + }; - vcc_1v2_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "VCC_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; + vcc_1v2_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - vcc_1v8_reg: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "VCC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vcc_1v8_reg: regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - vcc_3v3_reg: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + vcc_3v3_reg: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { -- cgit v1.2.3 From f2ab263105c4f897ca482ae2e9a1ad560ca742d4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 3 Jul 2020 20:44:51 +0200 Subject: ARM: dts: exynos: Define fixed regulators in root node for consistency in SMDK5420 Remove the regulators node and define fixed regulators directly under the root node. This makes SMDK5420 board consistent with other Exynos boards. Name the fixed regulator nodes consistently. Suggested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5420-smdk5420.dts | 53 +++++++++++++------------------ 1 file changed, 22 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index e3f2afe8359a..83fa800fa1eb 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -32,40 +32,31 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd: fixed-regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd-supply"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + vdd: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - dbvdd: fixed-regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "dbvdd-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + dbvdd: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "dbvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - spkvdd: fixed-regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "spkvdd-supply"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + spkvdd: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "spkvdd-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; }; - usb300_vbus_reg: regulator-usb300 { + usb300_vbus_reg: regulator-3 { compatible = "regulator-fixed"; regulator-name = "VBUS0"; regulator-min-microvolt = <5000000>; @@ -76,7 +67,7 @@ enable-active-high; }; - usb301_vbus_reg: regulator-usb301 { + usb301_vbus_reg: regulator-4 { compatible = "regulator-fixed"; regulator-name = "VBUS1"; regulator-min-microvolt = <5000000>; -- cgit v1.2.3 From b5021cf9ce4e5ba931bb1561afdf4a57b7cc623b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 23 Jun 2020 20:46:11 +0900 Subject: ARM: dts: uniphier: add interrupts to support card serial Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked. Since then, 'make ARCH=arm dtbs_check' is so noisy because the required property 'interrupts' is missing. Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-ld6b-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-pro4-ref.dts | 4 ++++ arch/arm/boot/dts/uniphier-sld8-ref.dts | 4 ++++ 4 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index f2d060f403cc..bac922499205 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -39,6 +39,10 @@ interrupts = <1 8>; }; +&serialsc { + interrupts = <1 8>; +}; + &serial0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index 079cadc11e6c..e0136846ee94 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -42,6 +42,10 @@ interrupts = <4 8>; }; +&serialsc { + interrupts = <4 8>; +}; + &serial0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 181442c48532..22d7150a1eb7 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -42,6 +42,10 @@ interrupts = <2 8>; }; +&serialsc { + interrupts = <2 8>; +}; + &serial0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index cf9ea0b15065..0ad22af4294f 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -39,6 +39,10 @@ interrupts = <0 8>; }; +&serialsc { + interrupts = <0 8>; +}; + &serial0 { status = "okay"; }; -- cgit v1.2.3 From e8b00104ffb6468bcacd6e9801de96c33733cc51 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 23 Jun 2020 20:46:13 +0900 Subject: ARM: dts: uniphier: rename support card serial node to fix schema warning Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked. 'make ARCH=arm dtbs_check' emits the following warning: uart@b0000: $nodename:0: 'uart@b0000' does not match '^serial(@[0-9a-f,]+)*$' Rename the node to follow the pattern defined in Documentation/devicetree/bindings/serial/serial.yaml Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-support-card.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index bf441c2eff79..11e46e7de7c5 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -23,7 +23,7 @@ reg-io-width = <4>; }; - serialsc: uart@b0000 { + serialsc: serial@b0000 { compatible = "ns16550a"; reg = <0x000b0000 0x20>; clock-frequency = <12288000>; -- cgit v1.2.3 From 2b1b1267080fe822789d0845a58ebb452724736b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 23 Jun 2020 20:46:12 +0900 Subject: arm64: dts: uniphier: add interrupts to support card serial Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked. Since then, 'make ARCH=arm64 dtbs_check' is so noisy because the required property 'interrupts' is missing. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 4 ++++ arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 4 ++++ arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 4 ++++ 3 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 693171f82ff1..d07401fafffa 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -42,6 +42,10 @@ interrupts = <0 8>; }; +&serialsc { + interrupts = <0 8>; +}; + &serial0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index eeb976e7892d..709908d5812b 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -42,6 +42,10 @@ interrupts = <0 8>; }; +&serialsc { + interrupts = <0 8>; +}; + &serial0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 7c30c6b56b57..eca60e02e85a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -43,6 +43,10 @@ interrupts = <4 8>; }; +&serialsc { + interrupts = <4 8>; +}; + &spi0 { status = "okay"; }; -- cgit v1.2.3 From dec32861da545972c72e7cfb5be9a35354f200c2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 7 Jul 2020 19:33:11 +0900 Subject: ARM: dts: uniphier: give fixed port number to support card serial Add this to the aliases node to make it more convenient. Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-ld4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 1 + arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-sld8-ref.dts | 2 +- 4 files changed, 4 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts index bac922499205..c46c2e8a10a7 100644 --- a/arch/arm/boot/dts/uniphier-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index e0136846ee94..e1828b2de89b 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -22,6 +22,7 @@ serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; + serial3 = &serialsc; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index 22d7150a1eb7..b8eaef2b9985 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -22,7 +22,7 @@ serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; - serial3 = &serial3; + serial3 = &serialsc; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts index 0ad22af4294f..6db949ec7411 100644 --- a/arch/arm/boot/dts/uniphier-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; -- cgit v1.2.3 From cde5a9ebbd38ad03f98adb57671f24f0bf57b8e4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 7 Jul 2020 19:33:22 +0900 Subject: arm64: dts: uniphier: give fixed port number to support card serial Add this to the aliases node to make it more convenient. Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index d07401fafffa..89d290c9bfc4 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 709908d5812b..6dc19695136f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index eca60e02e85a..b51188a043cb 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -19,7 +19,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; -- cgit v1.2.3 From 6fc1ed271fc4113d971953f5c3c77145c30f3f6e Mon Sep 17 00:00:00 2001 From: Nick Reitemeyer Date: Sun, 21 Jun 2020 21:38:23 +0200 Subject: ARM: dts: ux500: samsung-golden: Add touchkey Adds support for the back and menu keys on golden. Signed-off-by: Nick Reitemeyer Tested-by: Stephan Gerhold Reviewed-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200621193822.133683-2-nick.reitemeyer@web.de Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-ux500-samsung-golden.dts | 45 ++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index 5b499c0b2745..1e26b711d43d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -24,6 +24,32 @@ stdout-path = &serial2; }; + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + vdd-supply = <&ab8500_ldo_aux4_reg>; + vcc-supply = <&ab8500_ldo_aux6_reg>; + + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_default>; + linux,keycodes = ; + }; + }; + i2c-gpio-1 { compatible = "i2c-gpio"; sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; @@ -403,6 +429,16 @@ }; }; + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + golden_cfg1 { + pins = "GPIO77", /* TOUCHKEY_SCL */ + "GPIO78"; /* TOUCHKEY_SDA */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + i2c-gpio-1 { i2c_gpio_1_default: i2c_gpio_1 { golden_cfg1 { @@ -413,6 +449,15 @@ }; }; + touchkey { + touchkey_default: touchkey_default { + golden_cfg1 { + pins = "GPIO79"; /* TOUCHKEY_INT */ + ste,config = <&gpio_in_nopull>; + }; + }; + }; + sdi0 { sd_level_translator_default: sd_level_translator_default { golden_cfg1 { -- cgit v1.2.3 From 206c01d1ec14b5e238132ce7c8891ba02c3328c8 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 22 Jun 2020 09:34:32 +0100 Subject: ARM: dts: ux500: Supply nodes for the other 2 AB8500 PWM devices As per 'struct mfd_cell ab8500_devs[]' there are not 1, but 3 PWM devices on the AB8500. Until now, each of them have referenced the same Device Tree node. This change ensures each device has their own. Due to recent `dtc` checks [0], nodes cannot share the same node name, so we are forced to rename the affected nodes by appending their associated numeric 'bank ID'. [0] ste-ab8500.dtsi:210.16-214.7: ERROR (duplicate_node_names): /soc/prcmu@80157000/ab8500/ab8500-pwm: Duplicate node name Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20200622083432.1491715-1-lee.jones@linaro.org Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-ab8500.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 3cd6ee6d50e0..aab5719cc1a9 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -201,7 +201,19 @@ compatible = "stericsson,ab8500-sysctrl"; }; - ab8500-pwm { + ab8500-pwm-1 { + compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; + }; + + ab8500-pwm-2 { + compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; + }; + + ab8500-pwm-3 { compatible = "stericsson,ab8500-pwm"; clocks = <&ab8500_clock AB8500_SYSCLK_INT>; clock-names = "intclk"; -- cgit v1.2.3 From f7f7a8f4ebf8b5489ed6c7ce4680a94dc51a35d5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:05:34 +0200 Subject: ARM: dts: arm-realview: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200626080534.3400-1-krzk@kernel.org Signed-off-by: Linus Walleij --- arch/arm/boot/dts/arm-realview-eb-mp.dtsi | 2 +- arch/arm/boot/dts/arm-realview-pb1176.dts | 2 +- arch/arm/boot/dts/arm-realview-pb11mp.dts | 2 +- arch/arm/boot/dts/arm-realview-pbx-a9.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi index 29b636fce23f..26783d053ac7 100644 --- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi @@ -59,7 +59,7 @@ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,l220-cache"; reg = <0x1f002000 0x1000>; interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 2625ce66f8e7..f925782f8560 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -323,7 +323,7 @@ <0x10120000 0x100>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,l220-cache"; reg = <0x10110000 0x1000>; interrupt-parent = <&intc_dc1176>; diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index c69cf7ddbe61..9748e0fe800f 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -92,7 +92,7 @@ <0x1f000100 0x100>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,l220-cache"; reg = <0x1f002000 0x1000>; interrupt-parent = <&intc_tc11mp>; diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts index 90d00b407f85..85d3968fbb91 100644 --- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts +++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts @@ -60,7 +60,7 @@ }; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0x1f002000 0x1000>; cache-unified; -- cgit v1.2.3 From f2b56a6b2b071e0c3b757c0179248a1b6bebab10 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:05:52 +0200 Subject: ARM: dts: ste: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200626080552.3627-1-krzk@kernel.org Signed-off-by: Linus Walleij --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 2 +- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 3e10da3f8fd3..05fd544b06c1 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -260,7 +260,7 @@ reg = <0x80150000 0x2000>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; interrupts = ; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index f78b4eabd68c..4f38aeecadb3 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -15,7 +15,7 @@ <0x08000000 0x04000000>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,l210-cache"; reg = <0x10210000 0x1000>; interrupt-parent = <&vica>; -- cgit v1.2.3 From 08257610302159e08fd4f5d33787807374ea63c7 Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Tue, 30 Jun 2020 13:49:38 +0530 Subject: arm64: dts: qcom: sc7180: Drop the unused non-MSA SID Having a non-MSA (Modem Self-Authentication) SID bypassed breaks modem sandboxing i.e if a transaction were to originate from it, the hardware memory protections units (XPUs) would fail to flag them (any transaction originating from modem are historically termed as an MSA transaction). Drop the unused non-MSA modem SID on SC7180 SoCs and cheza so that SMMU continues to block them. Tested-by: Douglas Anderson Reviewed-by: Sai Prakash Ranjan Reviewed-by: Douglas Anderson Fixes: bec71ba243e95 ("arm64: dts: qcom: sc7180: Update Q6V5 MSS node") Fixes: 68aee4af5f620 ("arm64: dts: qcom: sdm845-cheza: Add iommus property") Cc: stable@vger.kernel.org Reported-by: Sai Prakash Ranjan Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200630081938.8131-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 39dbfc89689e..141de49a1b7d 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -312,7 +312,7 @@ &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; - iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; memory-region = <&mba_mem &mpss_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 70466cc4b405..64fc1bfd66fa 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -634,7 +634,7 @@ ap_ts_i2c: &i2c14 { }; &mss_pil { - iommus = <&apps_smmu 0x780 0x1>, + iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; }; -- cgit v1.2.3 From 54b50f2153a452077557e0ce864566c6ebe640fe Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Fri, 3 Jul 2020 02:16:43 +0530 Subject: arm64: dts: qcom: sdm845: Add cpu OPP tables Add OPP tables required to scale DDR/L3 per freq-domain on SDM845 SoCs. Tested-by: Bjorn Andersson Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200702204643.25785-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 285 +++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index fee50d979dc3..b0d8308a3e95 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -198,6 +199,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -220,6 +224,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { @@ -239,6 +246,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { @@ -258,6 +268,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { @@ -277,6 +290,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { @@ -296,6 +312,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { @@ -315,6 +334,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { @@ -334,6 +356,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { @@ -433,6 +458,266 @@ }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 7680000>; + }; + + cpu0_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <1804000 10444800>; + }; + + cpu0_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <2188000 13516800>; + }; + + cpu0_opp12: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <2188000 15052800>; + }; + + cpu0_opp13: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 16588800>; + }; + + cpu0_opp14: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <3072000 18124800>; + }; + + cpu0_opp15: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 19353600>; + }; + + cpu0_opp16: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 19353600>; + }; + + cpu0_opp17: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <4068000 20889600>; + }; + + cpu0_opp18: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu4_opp_table: cpu4_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 9216000>; + }; + + cpu4_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <3072000 11980800>; + }; + + cpu4_opp12: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp13: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp14: opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp15: opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp16: opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp17: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp18: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <5412000 19353600>; + }; + + cpu4_opp19: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp20: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp21: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <7216000 19353600>; + }; + + cpu4_opp22: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp23: opp-2092800000 { + opp-hz = /bits/ 64 <2092800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp24: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp25: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp26: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp27: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp28: opp-2476800000 { + opp-hz = /bits/ 64 <2476800000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp29: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp30: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp31: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp32: opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <7216000 25497600>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; -- cgit v1.2.3 From 656d648268df4ef13cd7a4ee6bbf2081f3e826bd Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 8 Jul 2020 17:54:10 +0900 Subject: ARM: dts: uniphier: Rename ethphy node to ethernet-phy This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-ld6b-ref.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-ace.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-ref.dts | 2 +- arch/arm/boot/dts/uniphier-pro4-sanji.dts | 2 +- arch/arm/boot/dts/uniphier-pxs2-gentil.dts | 2 +- arch/arm/boot/dts/uniphier-pxs2-vodka.dts | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts index e1828b2de89b..5bc7fe11b517 100644 --- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts @@ -81,7 +81,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts index 64246fad325c..27ff2b7b9d0e 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ace.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts @@ -87,7 +87,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts index b8eaef2b9985..3b9b61314d01 100644 --- a/arch/arm/boot/dts/uniphier-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts @@ -88,7 +88,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts index 5396556dee58..7b6faf2e795e 100644 --- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts +++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts @@ -82,7 +82,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts index 8e9ac579aa9a..759384b60663 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts @@ -87,7 +87,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts index 8eacc7bdecb7..7e08a459f7d8 100644 --- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts @@ -88,7 +88,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; -- cgit v1.2.3 From c60a5cee6ef88a6ae5aff58f30bc2028674a7efd Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 8 Jul 2020 17:52:00 +0900 Subject: ARM: dts: uniphier: Add PCIe endpoint and PHY node for Pro5 This adds PCIe endpoint controller and PHY nodes for Pro5 SoC, and also adds pinctrl node for PCIe. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-pinctrl.dtsi | 5 +++++ arch/arm/boot/dts/uniphier-pro5.dtsi | 30 ++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index bfdfb764b25b..c0fd029b37e5 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -126,6 +126,11 @@ function = "nand"; }; + pinctrl_pcie: pcie { + groups = "pcie"; + function = "pcie"; + }; + pinctrl_sd: sd { groups = "sd"; function = "sd"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index feadb4a378eb..3525125832dd 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -613,6 +613,36 @@ }; }; + pcie_ep: pcie-ep@66000000 { + compatible = "socionext,uniphier-pro5-pcie-ep", + "snps,dw-pcie-ep"; + status = "disabled"; + reg-names = "dbi", "dbi2", "link", "addr_space"; + reg = <0x66000000 0x1000>, <0x66001000 0x1000>, + <0x66010000 0x10000>, <0x67000000 0x400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 24>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 24>; + num-ib-windows = <16>; + num-ob-windows = <16>; + num-lanes = <4>; + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-pro5-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 24>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 24>; + }; + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; -- cgit v1.2.3 From dcd54fa89ccdba90cb79ab49c01263c3ceb8d683 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 8 Jul 2020 17:54:11 +0900 Subject: arm64: dts: uniphier: Rename ethphy node to ethernet-phy This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts | 2 +- arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts | 4 ++-- 6 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 816ac25fa1eb..da44a15a8adf 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -157,7 +157,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 89d290c9bfc4..617d2b1e9b1e 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -80,7 +80,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts index 816919b42d2e..aa159a11292c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts @@ -153,7 +153,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index 2c000082667c..a01579cb3b79 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -141,7 +141,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 6dc19695136f..39ee279a1eb9 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -68,7 +68,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index b51188a043cb..086040306fb3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -101,7 +101,7 @@ }; &mdio0 { - ethphy0: ethphy@0 { + ethphy0: ethernet-phy@0 { reg = <0>; }; }; @@ -112,7 +112,7 @@ }; &mdio1 { - ethphy1: ethphy@0 { + ethphy1: ethernet-phy@0 { reg = <0>; }; }; -- cgit v1.2.3 From e6bd81a2290f03db8baf761d06071f269dc8e177 Mon Sep 17 00:00:00 2001 From: Kunihiko Hayashi Date: Wed, 8 Jul 2020 17:56:18 +0900 Subject: arm64: dts: uniphier: Add missing clock-names and reset-names to pcie-phy This adds missing clock-names and reset-names to pcie-phy node according to Documentation/devicetree/bindings/phy/socionext,uniphier-pcie.yaml. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada --- arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi | 2 ++ arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index f4a56b208837..a87b8a678719 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -936,7 +936,9 @@ compatible = "socionext,uniphier-ld20-pcie-phy"; reg = <0x66038000 0x4000>; #phy-cells = <0>; + clock-names = "link"; clocks = <&sys_clk 24>; + reset-names = "link"; resets = <&sys_rst 24>; socionext,syscon = <&soc_glue>; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 72f16881cf53..0e52dadf54b3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -833,7 +833,9 @@ compatible = "socionext,uniphier-pxs3-pcie-phy"; reg = <0x66038000 0x4000>; #phy-cells = <0>; + clock-names = "link"; clocks = <&sys_clk 24>; + reset-names = "link"; resets = <&sys_rst 24>; socionext,syscon = <&soc_glue>; }; -- cgit v1.2.3 From 781865604d1695314df901e106d27b26446359d8 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 10 Jul 2020 16:43:23 +0900 Subject: ARM: dts: uniphier: simplify support-card node structure This device hierarchy is needlessly complex. Remove the support-card node level, and move the ethernet and serial nodes right under the system-bus node. This also fixes the following warning from 'make ARCH=arm dtbs_check': support-card@1,1f00000: $nodename:0: 'support-card@1,1f00000' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Masahiro Yamada --- arch/arm/boot/dts/uniphier-support-card.dtsi | 31 +++++++++++----------------- 1 file changed, 12 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi index 11e46e7de7c5..444802fee9fb 100644 --- a/arch/arm/boot/dts/uniphier-support-card.dtsi +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -8,26 +8,19 @@ &system_bus { status = "okay"; ranges = <1 0x00000000 0x42000000 0x02000000>; + interrupt-parent = <&gpio>; - support_card: support-card@1,1f00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00000000 1 0x01f00000 0x00100000>; - interrupt-parent = <&gpio>; - - ethsc: ethernet@0 { - compatible = "smsc,lan9118", "smsc,lan9115"; - reg = <0x00000000 0x1000>; - phy-mode = "mii"; - reg-io-width = <4>; - }; + ethsc: ethernet@1,1f00000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <1 0x01f00000 0x1000>; + phy-mode = "mii"; + reg-io-width = <4>; + }; - serialsc: serial@b0000 { - compatible = "ns16550a"; - reg = <0x000b0000 0x20>; - clock-frequency = <12288000>; - reg-shift = <1>; - }; + serialsc: serial@1,1fb0000 { + compatible = "ns16550a"; + reg = <1 0x01fb0000 0x20>; + clock-frequency = <12288000>; + reg-shift = <1>; }; }; -- cgit v1.2.3 From 79c528e9447a89522506232f8dc20602be92f280 Mon Sep 17 00:00:00 2001 From: Hsin-Yi Wang Date: Mon, 6 Jul 2020 16:37:05 +0800 Subject: arm64: dts: mt8173: Re-measure capacity-dmips-mhz Re measure capacity-dmips-mhz on elm and hana: cpu 1: 9502 DMIPS @ 1703 Mhz cpu 3: 16250 DMIPS @ 2106 Mhz ==> 740 : 1024 Signed-off-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200706083705.2343150-1-hsinyi@chromium.org Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 70b1ffcab7f0..5e046f9d48ce 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -167,7 +167,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; - capacity-dmips-mhz = <526>; + capacity-dmips-mhz = <740>; }; cpu1: cpu@1 { @@ -182,7 +182,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; - capacity-dmips-mhz = <526>; + capacity-dmips-mhz = <740>; }; cpu2: cpu@100 { -- cgit v1.2.3 From 64c9f12e45ea44ea957b1bccdcf8aeef127fbe49 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:52 +0200 Subject: arm64: dts: mt6358: Add the compatible for the regulators The regulators are expected to be instantiated with matching the device-tree compatible, so add the proper compatible name under the regulators node. Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-3-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt6358.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index 9361ada0c497..fa159b20379e 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -16,6 +16,8 @@ }; mt6358regulator: mt6358regulator { + compatible = "mediatek,mt6358-regulator"; + mt6358_vdram1_reg: buck_vdram1 { regulator-name = "vdram1"; regulator-min-microvolt = <500000>; -- cgit v1.2.3 From 72704ac62334bd8ac93214d5304c170d0976413e Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:53 +0200 Subject: arm64: dts: mt8183: Add MediaTek's peripheral configuration controller The MediaTek's peripheral configuration controller is present on the MT8183 SoC. Add the node for that controller. Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-4-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 1e03c849dc5d..00137ec61164 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -285,6 +285,12 @@ #reset-cells = <1>; }; + pericfg: syscon@10003000 { + compatible = "mediatek,mt8183-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt8183-pinctrl"; reg = <0 0x10005000 0 0x1000>, -- cgit v1.2.3 From 2a7abd3efbe317d7dd0878a77038f9b5f2b5f866 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:54 +0200 Subject: arm64: dts: mt8183: Fix unit name warnings Remove the unit address from the DT nodes that doesn't have a reg property. This fixes the following unit name warnings: Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@0: node has a unit name, but no reg or ranges property Warning (unit_address_vs_reg): /cpus/idle-states/cluster-sleep@1: node has a unit name, but no reg or ranges property Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-5-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 00137ec61164..6c00ffa27520 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -168,7 +168,7 @@ min-residency-us = <800>; }; - CLUSTER_SLEEP0: cluster-sleep@0 { + CLUSTER_SLEEP0: cluster-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x01010001>; @@ -176,7 +176,7 @@ exit-latency-us = <400>; min-residency-us = <1000>; }; - CLUSTER_SLEEP1: cluster-sleep@1 { + CLUSTER_SLEEP1: cluster-sleep-1 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x01010001>; -- cgit v1.2.3 From 4b1b8fd88ceab5b0efa9eb53cd6e5fc5457488a9 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:55 +0200 Subject: arm64: dts: mt8183-evb: Fix unit name warnings Remove the unit address from the DT nodes that doesn't have a reg property. This fixes the following unit name warnings: Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc0@0: node has a unit name, but no reg or ranges property Warning (unit_address_vs_reg): /soc/pinctrl@10005000/mmc1@0: node has a unit name, but no reg or ranges property Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-6-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index afd6ddbcbdf2..ae405bd8f06b 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -205,7 +205,7 @@ }; }; - mmc0_pins_uhs: mmc0@0{ + mmc0_pins_uhs: mmc0 { pins_cmd_dat { pinmux = , , @@ -264,7 +264,7 @@ }; }; - mmc1_pins_uhs: mmc1@0{ + mmc1_pins_uhs: mmc1 { pins_cmd_dat { pinmux = , , -- cgit v1.2.3 From 6b3bfa37a90a373baf01ebb97ff4200f4d56d886 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:56 +0200 Subject: arm64: dts: mt8183: Add USB3.0 support Add the USB3.0 phyter and controller for the MediaTek's MT8183 SoC. Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-7-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8183.dtsi | 58 ++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 6c00ffa27520..102105871db2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include #include "mt8183-pinfunc.h" / { @@ -648,6 +649,36 @@ status = "disabled"; }; + ssusb: usb@11201000 { + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: xhci@11200000 { + compatible = "mediatek,mt8183-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + interrupts = ; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; @@ -684,6 +715,33 @@ reg = <0 0x11f10000 0 0x1000>; }; + u3phy: usb-phy@11f40000 { + compatible = "mediatek,mt8183-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #phy-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11f40000 0x1000>; + status = "okay"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + mediatek,discth = <15>; + status = "okay"; + }; + + u3port0: usb-phy@0700 { + reg = <0x0700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + mfgcfg: syscon@13000000 { compatible = "mediatek,mt8183-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; -- cgit v1.2.3 From cd894e274b74b33f417776e3ab6adec237558337 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Thu, 25 Jun 2020 12:17:57 +0200 Subject: arm64: dts: mt8183: Add krane-sku176 board Also known as the Lenovo IdeaPad Duet Chromebook. There are different krane boards with shared resources, hence a mt8183-kukui-krane.dtsi was created for easily introduce future new boards. The same happens with the baseboard codenamed kukui where different variants, apart from kukui variant can take advantage of the shared resources. Signed-off-by: Ben Ho [originally created by Ben Ho but adapted and ported to mainline] Signed-off-by: Enric Balletbo i Serra Tested-by: Hsin-Yi Wang Link: https://lore.kernel.org/r/20200625101757.101775-8-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/Makefile | 1 + .../dts/mediatek/mt8183-kukui-krane-sku176.dts | 18 + .../boot/dts/mediatek/mt8183-kukui-krane.dtsi | 343 +++++++++ arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 788 +++++++++++++++++++++ 4 files changed, 1150 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index a57af9da9f5c..3ee682c266cc 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -11,4 +11,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts new file mode 100644 index 000000000000..47113e275cb5 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + * + * Device-tree for Krane sku176. + * + * SKU is a 8-bit value (0xb0 == 176): + * - Bits 7..4: Panel ID: 0xb (BOE) + * - Bits 3..0: SKU ID: 0x0 (default) + */ + +/dts-v1/; +#include "mt8183-kukui-krane.dtsi" + +/ { + model = "MediaTek krane sku176 board"; + compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi new file mode 100644 index 000000000000..fbc471ccf805 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + */ + +#include "mt8183-kukui.dtsi" + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen4: touchscreen@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = ; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = ; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = ; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = ; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = ; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "LE_Krane"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi new file mode 100644 index 000000000000..f0a070535b34 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho + * Erin Lo + */ + +#include +#include +#include "mt8183.dtsi" +#include "mt6358.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + clk32k: oscillator1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + it6505_pp18_reg: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "it6505_pp18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 178 0>; + enable-active-high; + }; + + lcd_pp3300: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_pp3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + bl_pp5000: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "bl_pp5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + mmc1_fixed_power: regulator3 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mmc1_fixed_io: regulator4 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp1800_alw: regulator5 { + compatible = "regulator-fixed"; + regulator-name = "pp1800_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp3300_alw: regulator6 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max98357a: codec0 { + compatible = "maxim,max98357a"; + sdmode-gpios = <&pio 175 0>; + }; + + btsco: codec1 { + compatible = "linux,bt-sco"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_pwrseq>; + + /* Toggle WIFI_ENABLE to reset the chip. */ + reset-gpios = <&pio 119 1>; + }; + + wifi_wakeup: wifi-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_wakeup>; + + wowlan { + label = "Wake on WiFi"; + gpios = <&pio 113 GPIO_ACTIVE_HIGH>; + linux,code = ; + wakeup-source; + }; + }; + + tboard_thermistor1: thermal-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; + + tboard_thermistor2: thermal-sensor2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x12814>; + vmmc-supply = <&mt6358_vemc_reg>; + vqmmc-supply = <&mt6358_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + vmmc-supply = <&mmc1_fixed_power>; + vqmmc-supply = <&mmc1_fixed_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + max-frequency = <200000000>; + drv-type = <2>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + non-removable; + no-mmc; + no-sd; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + #address-cells = <1>; + #size-cells = <0>; + + qca_wifi: qca-wifi@1 { + compatible = "qcom,ath10k"; + reg = <1>; + }; +}; + +&mt6358_vdram2_reg { + regulator-always-on; +}; + +&mt6358codec { + Avdd-supply = <&mt6358_vaud28_reg>; +}; + +&mt6358_vsim1_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&mt6358_vsim2_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pio { + bt_pins: bt-pins { + pins_bt_en { + pinmux = ; + output-low; + }; + }; + + ec_ap_int_odl: ec_ap_int_odl { + pins1 { + pinmux = ; + input-enable; + bias-pull-up; + }; + }; + + h1_int_od_l: h1_int_od_l { + pins1 { + pinmux = ; + input-enable; + }; + }; + + i2c0_pins: i2c0 { + pins_bus { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c1_pins: i2c1 { + pins_bus { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c2_pins: i2c2 { + pins_bus { + pinmux = , + ; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c3_pins: i2c3 { + pins_bus { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c4_pins: i2c4 { + pins_bus { + pinmux = , + ; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c5_pins: i2c5 { + pins_bus { + pinmux = , + ; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c6_pins: i2c6 { + pins_bus { + pinmux = , + ; + bias-disable; + }; + }; + + mmc0_pins_default: mmc0-pins-default { + pins_cmd_dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = ; + drive-strength = ; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = ; + drive-strength = ; + mediatek,pull-down-adv = <01>; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + pins_cmd_dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = ; + drive-strength = ; + mediatek,pull-down-adv = <10>; + }; + + pins_ds { + pinmux = ; + drive-strength = ; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = ; + drive-strength = ; + mediatek,pull-up-adv = <01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = , + , + , + , + ; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = ; + input-enable; + mediatek,pull-down-adv = <10>; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = , + , + , + , + ; + drive-strength = ; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = ; + drive-strength = ; + mediatek,pull-down-adv = <10>; + input-enable; + }; + }; + + spi0_pins: spi0 { + pins_spi{ + pinmux = , + , + , + ; + bias-disable; + }; + }; + + spi1_pins: spi1 { + pins_spi{ + pinmux = , + , + , + ; + bias-disable; + }; + }; + + spi2_pins: spi2 { + pins_spi{ + pinmux = , + , + ; + bias-disable; + }; + pins_spi_mi { + pinmux = ; + mediatek,pull-down-adv = <00>; + }; + }; + + spi3_pins: spi3 { + pins_spi{ + pinmux = , + , + , + ; + bias-disable; + }; + }; + + spi4_pins: spi4 { + pins_spi{ + pinmux = , + , + , + ; + bias-disable; + }; + }; + + spi5_pins: spi5 { + pins_spi{ + pinmux = , + , + , + ; + bias-disable; + }; + }; + + uart0_pins_default: uart0-pins-default { + pins_rx { + pinmux = ; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = ; + }; + }; + + uart1_pins_default: uart1-pins-default { + pins_rx { + pinmux = ; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = ; + }; + pins_rts { + pinmux = ; + output-enable; + }; + pins_cts { + pinmux = ; + input-enable; + }; + }; + + uart1_pins_sleep: uart1-pins-sleep { + pins_rx { + pinmux = ; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = ; + }; + pins_rts { + pinmux = ; + output-enable; + }; + pins_cts { + pinmux = ; + input-enable; + }; + }; + + wifi_pins_pwrseq: wifi-pins-pwrseq { + pins_wifi_enable { + pinmux = ; + output-low; + }; + }; + + wifi_pins_wakeup: wifi-pins-wakeup { + pins_wifi_wakeup { + pinmux = ; + input-enable; + }; + }; +}; + +&soc_data { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; + status = "okay"; + cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + interrupt-parent = <&pio>; + interrupts = <153 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + w25q64dw: spi-flash@0 { + compatible = "winbond,w25q64dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + spi-max-frequency = <3000000>; + interrupt-parent = <&pio>; + interrupts = <151 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_odl>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbc_extcon: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + }; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins_default>; + pinctrl-1 = <&uart1_pins_sleep>; + status = "okay"; + interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, + <&pio 121 IRQ_TYPE_EDGE_FALLING>; + + bluetooth: bluetooth { + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + status = "okay"; + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pio 120 0>; + clocks = <&clk32k>; + firmware-name = "nvm_00440302_i2s.bin"; + }; +}; + +&usb_host { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; +}; + +#include +#include -- cgit v1.2.3 From 83ebd4a521699c6f480ffb476a19007a6e3fcd47 Mon Sep 17 00:00:00 2001 From: Chuanhua Han Date: Mon, 22 Jun 2020 16:17:51 +0800 Subject: arm64: dts: lx2160a: add dspi controller DT nodes Add the dspi support on lx2160 Signed-off-by: Chuanhua Han Signed-off-by: Bao Xiaowei Signed-off-by: Hou Zhiqiang Signed-off-by: Zhao Qiang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 39 ++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index abaeb587de48..f56172f60076 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -777,6 +777,45 @@ status = "disabled"; }; + dspi0: spi@2100000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + status = "disabled"; + }; + + dspi1: spi@2110000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + status = "disabled"; + }; + + dspi2: spi@2120000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + status = "disabled"; + }; + esdhc0: esdhc@2140000 { compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; -- cgit v1.2.3 From a6533df34df4b41b3abdf54bbce6b9c088d48271 Mon Sep 17 00:00:00 2001 From: Chuanhua Han Date: Mon, 22 Jun 2020 16:17:52 +0800 Subject: arm64: dts: lx2160a: add DT node for all DSPI controller Add device tree node for first flash (CS0) connected to all dspi controller. Signed-off-by: Chuanhua Han Signed-off-by: Wasim Khan Signed-off-by: Zhao Qiang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 36 +++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 3b88e1efe4db..2d1fe6c3797f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -35,6 +35,42 @@ status = "okay"; }; +&dspi0 { + status = "okay"; + + dflash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + status = "okay"; + + dflash1: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi2 { + status = "okay"; + + dflash2: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + &esdhc0 { status = "okay"; }; -- cgit v1.2.3 From dca78e322885acd6ba516e6caa6f20a617aab7b5 Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 24 Jun 2020 10:44:58 +0800 Subject: arm64: dts: lx2160a: add ftm_alarm0 DT node The patch adds ftm_alarm0 DT node for Soc LX2160A FlexTimer1 module is used to wakeup the system in deep sleep Signed-off-by: Biwen Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index f56172f60076..d0c2c93c3df7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -16,6 +16,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + rtc1 = &ftm_alarm0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -927,6 +931,20 @@ timeout-sec = <30>; }; + rcpm: power-controller@1e34040 { + compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + little-endian; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,lx2160a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = ; + }; + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; -- cgit v1.2.3 From 791c88ca57139e1d277b68d41f3e7d640c4957eb Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 24 Jun 2020 10:44:59 +0800 Subject: arm64: dts: ls1028a: Add ftm_alarm0 DT node The patch adds ftm_alarm0 DT node for LS1028ARDB board FlexTimer1 module is used to wakeup the system Signed-off-by: Biwen Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index bc6f0c0f85da..0efeb8fa773e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -17,6 +17,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + rtc1 = &ftm_alarm0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -1003,6 +1007,19 @@ }; }; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1028a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = ; + }; }; malidp0: display@f080000 { -- cgit v1.2.3 From f4fe3a86654956179967a219f3be97ff035a957a Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 24 Jun 2020 10:45:00 +0800 Subject: arm64: dts: layerscape: add ftm_alarm0 node The patch adds ftm_alarm0 DT node - add new rcpm node - add ftm_alarm0 node - aliases ftm_alarm0 as rtc1 Signed-off-by: Biwen Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 15 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 15 +++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 14 ++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 14 ++++++++++++++ 5 files changed, 72 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 006e544d1fdb..ff19ec415b60 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -17,6 +17,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; rtic-a = &rtic_a; rtic-b = &rtic_b; rtic-c = &rtic_c; @@ -512,6 +513,20 @@ <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1012a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = ; + big-endian; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 3b641bd43229..55ceae7a8b3d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -27,6 +27,7 @@ ethernet4 = &enet4; ethernet5 = &enet5; ethernet6 = &enet6; + rtc1 = &ftm_alarm0; }; cpus { @@ -829,6 +830,19 @@ big-endian; }; + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1043a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = ; + big-endian; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index d4c1da3d4bde..3c92c21d052c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -28,6 +28,7 @@ ethernet5 = &enet5; ethernet6 = &enet6; ethernet7 = &enet7; + rtc1 = &ftm_alarm0; }; cpus { @@ -765,6 +766,20 @@ queue-sizes = <64 64>; big-endian; }; + + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1046a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = ; + big-endian; + }; }; reserved-memory { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 36a799554620..169f4742ae3b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -18,6 +18,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; }; cpus { @@ -781,6 +782,19 @@ }; }; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = ; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 3944ef16ec60..41102dacc2e1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -20,6 +20,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; @@ -763,6 +764,19 @@ reg = <0x0 0x04000000 0x0 0x01000000>; interrupts = <0 12 4>; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls208xa-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = ; + }; }; ddr1: memory-controller@1080000 { -- cgit v1.2.3 From 160e7d8e89317fed7ef4c97afaa20a9a16b7757f Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Mon, 29 Jun 2020 15:45:18 +0800 Subject: arm64: dts: ls1046a: add more thermal zone support There are 5 thermal zones in ls1046a soc. Add the rest thermal zone nodes to enable them. Signed-off-by: Yuantian Tang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 88 ++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 3c92c21d052c..0246d975a206 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -118,19 +118,79 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + serdes { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + serdes-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + serdes-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + fman { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + fman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + fman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + core_cluster_crit: core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -139,7 +199,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -148,6 +208,26 @@ }; }; }; + + sec { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + sec-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + sec-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { -- cgit v1.2.3 From c147caa6e8a47edbc6735848499191a642d49933 Mon Sep 17 00:00:00 2001 From: Yuantian Tang Date: Mon, 29 Jun 2020 15:45:19 +0800 Subject: arm64: dts: ls1043a: add more thermal zone support There are 5 thermal zones in ls1043a soc. Add the rest thermal zone nodes to enable them. Signed-off-by: Yuantian Tang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 88 ++++++++++++++++++++++++-- 1 file changed, 84 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 55ceae7a8b3d..aaf79924159c 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -150,19 +150,79 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller { polling-delay-passive = <1000>; polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + serdes { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + serdes-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + serdes-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + fman { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + fman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + fman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; thermal-sensors = <&tmu 3>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + + core_cluster_crit: core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -171,7 +231,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -180,6 +240,26 @@ }; }; }; + + sec { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + sec-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + sec-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { -- cgit v1.2.3 From b39cb21faee77e8bab988f562e3aeb46b98cc59b Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Mon, 29 Jun 2020 16:42:30 +0800 Subject: arm64: dts: imx8mp: add ddr pmu device node Add ddr pmu device node for i.MX8MP. Signed-off-by: Joakim Zhang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 90bdef8447fa..9de2aa1c573c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -744,5 +744,11 @@ interrupts = ; interrupt-parent = <&gic>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = ; + }; }; }; -- cgit v1.2.3 From 6386156eb279386a94c74b624d41515a6481278d Mon Sep 17 00:00:00 2001 From: Robin Gong Date: Sat, 4 Jul 2020 00:19:37 +0800 Subject: arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board Add pca9450 pmic driver for i.mx8mn-evk board. Signed-off-by: Robin Gong Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 96 +++++++++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 6 ++ 2 files changed, 102 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index 61f351958618..b846526a8d8b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -13,6 +13,102 @@ compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; }; +&i2c1 { + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + + regulators { + buck1: BUCK1{ + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &A53_0 { /delete-property/operating-points-v2; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 85fc0aa38c4f..98f5324b1dbe 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -223,6 +223,12 @@ >; }; + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 -- cgit v1.2.3 From 1069a0bbf9d8c3c76bea0be55c79d2a15582a81f Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Tue, 7 Jul 2020 15:40:31 +0800 Subject: arm64: dts: ls1043a: update USB nodes status to match board config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ls1043a-rdb and ls1043a-qds board’s default HW config (such as pin mux selection) would not enable some USB controllers’ data path, which causing over-current detected on those controllers. This will hit the case of ‘xhci driver prevent bus suspend if a root hub port detected over-current condition’, causing system failed to be suspended. So disable them in device tree to resolve this issue. Signed-off-by: Ran Wang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 8 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++ 3 files changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 1aac81da7e37..fea167d222cf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -148,4 +148,8 @@ }; }; +&usb0 { + status = "okay"; +}; + #include "fsl-ls1043-post.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index bfa9d957e536..3516af4726a5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -209,3 +209,11 @@ fsl,tdm-interface; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index aaf79924159c..5c2e370f6316 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -758,6 +758,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb1: usb3@3000000 { @@ -768,6 +769,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb2: usb3@3100000 { @@ -778,6 +780,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; sata: sata@3200000 { -- cgit v1.2.3 From 67dd4954d247e0300cd760fbd7478e5d919899a2 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Tue, 7 Jul 2020 18:00:05 -0700 Subject: arm64: dts: zii-ultra: update MDIO speed and preamble Update MDIO configuration with zii-ultra device to fully utilize MDIO endpoint capabilities. Device supports 12.5MHz clock and doesn't require MDIO preamble. Signed-off-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 6a55165bd76a..0d1088dcaa02 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -131,6 +131,8 @@ mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch: switch@0 { -- cgit v1.2.3 From 3b674382df13b75afbb855745f48f7f79f21518c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 May 2020 23:13:19 +0300 Subject: arm64: dts: renesas: r8a77980: Add RPC-IF support Describe RPC-IF in the R8A77980 device tree. Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/f18853d9-8ef9-717a-9039-2191b26e579f@cogentembedded.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77980.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index 387e6d99f2f3..59f5bbd72161 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1344,6 +1344,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77980-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From 9d3f2e7e8716fc37ed0d851100eab9d2cf70257b Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 19 May 2020 23:14:06 +0300 Subject: arm64: dts: renesas: r8a77980: condor/v3hsk: Add QSPI flash support Define the Condor/V3HSK board dependent parts of the RPC-IF device node. Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it. Based on the original patches by Dmitry Shifrin. Signed-off-by: Dmitry Shifrin Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/322ca212-a45f-cd2c-f1eb-737f0aa42d22@cogentembedded.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 67 +++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 67 +++++++++++++++++++++++++ 2 files changed, 134 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index ef8350a062af..422ec53740cb 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -262,6 +262,11 @@ power-source = <1800>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -273,6 +278,68 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index 6dff04693223..7838dcee3136 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -187,6 +187,11 @@ function = "i2c0"; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -198,6 +203,68 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; -- cgit v1.2.3 From 11a6a6a50b1c2c9439a078f1da3c9f3c3d918102 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 19 Jun 2020 23:21:37 +0300 Subject: arm64: dts: renesas: r8a77970: Add RPC-IF support Describe RPC-IF in the R8A77970 device tree. Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/ba8bb326-7e77-6ab7-668f-fdc22010c8ef@cogentembedded.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77970.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index bd95ecb1b40d..2b9124a5ca86 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1039,6 +1039,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77970-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = ; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From daa36ae015194beebdb66a94e493104a4c29ad81 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 19 Jun 2020 23:22:32 +0300 Subject: arm64: dts: renesas: r8a77970: eagle/v3msk: Add QSPI flash support Define the Eagle/V3MSK board dependent parts of the RPC-IF device node. Add device nodes for Spansion S25FS512S SPI flash and MTD partitions on it. Based on the original patches by Dmitry Shifrin. Signed-off-by: Dmitry Shifrin Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/fca1d012-29bf-eead-1c0d-4dd837c0bc68@cogentembedded.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 67 ++++++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 67 ++++++++++++++++++++++++++ 2 files changed, 134 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index ac2156ab3e62..5c28f303e911 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -187,12 +187,79 @@ function = "i2c0"; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 01c4ba0f7be1..668a1ece9af0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -212,12 +212,79 @@ power-source = <3300>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; -- cgit v1.2.3 From 66dfd9593b88284382f5af12a6f9b1095f7ecbe7 Mon Sep 17 00:00:00 2001 From: Wasim Khan Date: Fri, 10 Jul 2020 15:21:44 +0530 Subject: arm64: dts: lx2160a: Increase configuration space size lx2160a rev2 requires 4KB space for type0 and 4KB space for type1 iATU window. Increase configuration space size to 8KB to have sufficient space for type0 and type1 window. Signed-off-by: Wasim Khan Reviewed-by: Li Yang Acked-by: Hou Zhiqiang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index d0c2c93c3df7..d247e4228d60 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -2,7 +2,7 @@ // // Device Tree Include file for Layerscape-LX2160A family SoC. // -// Copyright 2018 NXP +// Copyright 2018-2020 NXP #include #include @@ -1014,7 +1014,7 @@ pcie@3400000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ @@ -1042,7 +1042,7 @@ pcie@3500000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ @@ -1070,7 +1070,7 @@ pcie@3600000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x90 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ @@ -1098,7 +1098,7 @@ pcie@3700000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x98 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ @@ -1126,7 +1126,7 @@ pcie@3800000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ - 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */ + 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ @@ -1154,7 +1154,7 @@ pcie@3900000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ - 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */ + 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = , /* AER interrupt */ , /* PME interrupt */ -- cgit v1.2.3 From 915e19686f5991bf6dd9160ef6830041083c894f Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 20 May 2020 14:30:16 +0800 Subject: ARM: dts: imx: Make tempmon node as child of anatop node i.MX6/7 SoCs' temperature sensor is inside anatop module from HW perspective, so it should be a child node of anatop. Signed-off-by: Anson Huang Reviewed-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++----------- arch/arm/boot/dts/imx6sl.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sll.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6sx.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx6ul.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/imx7s.dtsi | 20 ++++++++++---------- 6 files changed, 61 insertions(+), 61 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 32114cf6acee..642054bbb89b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -69,17 +69,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; - #thermal-sensor-cells = <0>; - }; - ldb: ldb { #address-cells = <1>; #size-cells = <0>; @@ -795,6 +784,17 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + #thermal-sensor-cells = <0>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 911d8cf77f2c..d8efc0ab2ac9 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -93,16 +93,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx6q-tempmon"; - interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -628,6 +618,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6q-tempmon"; + interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index edd3abb9a9f1..bf7f048fd87f 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -105,16 +105,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: temperature-sensor { - compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; - interrupts = ; - interrupt-parent = <&gpc>; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -531,6 +521,16 @@ anatop-max-voltage = <3400000>; anatop-enable-bit = <0>; }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = ; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usb-phy@20c9000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 94e3df47d1ad..ddcbfce10945 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,16 +134,6 @@ clock-output-names = "anaclk2"; }; - tempmon: tempmon { - compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; @@ -696,6 +686,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 5379a03391bd..6575937a59a1 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -131,16 +131,6 @@ clock-output-names = "ipp_di1"; }; - tempmon: tempmon { - compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; - }; - pmu { compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; @@ -612,6 +602,16 @@ anatop-min-voltage = <725000>; anatop-max-voltage = <1450000>; }; + + tempmon: tempmon { + compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>; + }; }; usbphy1: usbphy@20c9000 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index f6bb35d3ce51..ddf8b81ccba9 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -147,16 +147,6 @@ }; }; - tempmon: tempmon { - compatible = "fsl,imx7d-tempmon"; - interrupt-parent = <&gpc>; - interrupts = ; - fsl,tempmon = <&anatop>; - nvmem-cells = <&tempmon_calib>, <&fuse_grade>; - nvmem-cell-names = "calib", "temp_grade"; - clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; - }; - timer { compatible = "arm,armv7-timer"; interrupt-parent = <&intc>; @@ -586,6 +576,16 @@ anatop-max-voltage = <1300000>; anatop-enable-bit = <0>; }; + + tempmon: tempmon { + compatible = "fsl,imx7d-tempmon"; + interrupt-parent = <&gpc>; + interrupts = ; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&fuse_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + }; }; snvs: snvs@30370000 { -- cgit v1.2.3 From 5656bb3857c4904d1dec6e1b8f876c1c0337274e Mon Sep 17 00:00:00 2001 From: Yangbo Lu Date: Fri, 22 May 2020 09:30:52 +0800 Subject: ARM: dts: ls1021a: output PPS signal on FIPER2 The timer fixed interval period pulse generator register is used to generate periodic pulses. The down count register loads the value programmed in the fixed period interval (FIPER). At every tick of the timer accumulator overflow, the counter decrements by the value of TMR_CTRL[TCLK_PERIOD]. It generates a pulse when the down counter value reaches zero. It reloads the down counter in the cycle following a pulse. To use the TMR_FIPER register to generate desired periodic pulses. The value should programmed is, desired_period - tclk_period Current tmr-fiper2 value is to generate 100us periodic pulses. (But the value should have been 99995, not 99990. The tclk_period is 5.) This patch is to generate 1 second periodic pulses with value 999999995 programmed which is more desired by user. Signed-off-by: Yangbo Lu Acked-by: Richard Cochran Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 760a68c163c8..b2ff27af090e 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -772,7 +772,7 @@ fsl,tmr-prsc = <2>; fsl,tmr-add = <0xaaaaaaab>; fsl,tmr-fiper1 = <999999995>; - fsl,tmr-fiper2 = <99990>; + fsl,tmr-fiper2 = <999999995>; fsl,max-adj = <499999999>; fsl,extts-fifo; }; -- cgit v1.2.3 From a1abd6777f0e8a716d27d5767dd9796256205f02 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 28 May 2020 11:12:47 +0800 Subject: ARM: dts: imx: change ocotp node name on i.MX6/7 SoCs Change OCOTP node name from ocotp-ctrl to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang Reviewed-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sll.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 2 +- arch/arm/boot/dts/imx7s.dtsi | 2 +- arch/arm/boot/dts/imx7ulp.dtsi | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 642054bbb89b..b047403f05f5 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1162,7 +1162,7 @@ status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d8efc0ab2ac9..11e7bf315dd0 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -952,7 +952,7 @@ status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index bf7f048fd87f..b715aa7ed599 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -786,7 +786,7 @@ clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sll-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index ddcbfce10945..995e1b10c978 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -1055,7 +1055,7 @@ status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 6575937a59a1..2d64802c8b09 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -948,7 +948,7 @@ status = "disabled"; }; - ocotp: ocotp-ctrl@21bc000 { + ocotp: efuse@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6ul-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index ddf8b81ccba9..3cba73142034 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -526,7 +526,7 @@ }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx7d-ocotp", "syscon"; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index f7c4878534c8..367439639da9 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -452,7 +452,7 @@ reg = <0x410a3000 0x1000>; }; - ocotp: ocotp-ctrl@410a6000 { + ocotp: efuse@410a6000 { compatible = "fsl,imx7ulp-ocotp", "syscon"; reg = <0x410a6000 0x4000>; clocks = <&scg1 IMX7ULP_CLK_DUMMY>; -- cgit v1.2.3 From 17a2deb06105288d0fe33104f078562eb55e07ea Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 28 May 2020 11:12:49 +0800 Subject: ARM: dts: imx: change ocotp node name on MXS SoCs Change OCOTP node name from ocotp to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang Reviewed-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23.dtsi | 2 +- arch/arm/boot/dts/imx28.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index c5edff381213..18289f6fb1f3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -442,7 +442,7 @@ status = "disabled"; }; - ocotp@8002c000 { + efuse@8002c000 { compatible = "fsl,imx23-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index a1cbbeb39a4f..a2b799c56f8f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -1011,7 +1011,7 @@ status = "disabled"; }; - ocotp: ocotp@8002c000 { + ocotp: efuse@8002c000 { compatible = "fsl,imx28-ocotp", "fsl,ocotp"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 78b05005e213e8bb847ec7835d289d5ab76a5254 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Thu, 28 May 2020 11:12:50 +0800 Subject: ARM: dts: imx: change iim node name on i.MX SoCs Change IIM node name from iim to efuse to be compliant with yaml schema, it requires the nodename to be one of "eeprom|efuse|nvram". Signed-off-by: Anson Huang Reviewed-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 2 +- arch/arm/boot/dts/imx27.dtsi | 2 +- arch/arm/boot/dts/imx31.dtsi | 2 +- arch/arm/boot/dts/imx35.dtsi | 2 +- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 1123e683025c..4eaf4eb88e27 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -542,7 +542,7 @@ interrupts = <26>; }; - iim: iim@53ff0000 { + iim: efuse@53ff0000 { compatible = "fsl,imx25-iim", "fsl,imx27-iim"; reg = <0x53ff0000 0x4000>; interrupts = <19>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 002cd223f22d..ee04771729ce 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -540,7 +540,7 @@ #clock-cells = <1>; }; - iim: iim@10028000 { + iim: efuse@10028000 { compatible = "fsl,imx27-iim"; reg = <0x10028000 0x1000>; interrupts = <62>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 18270ec648fe..4f3d7ab3ce27 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -217,7 +217,7 @@ status = "disabled"; }; - iim: iim@5001c000 { + iim: efuse@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; interrupts = <19>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 2ebf2c1fa682..502112be42bd 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -320,7 +320,7 @@ status = "disabled"; }; - iim@53ff0000 { + efuse@53ff0000 { compatible = "fsl,imx35-iim"; reg = <0x53ff0000 0x4000>; interrupts = <19>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index d3583aad8323..c83bc7702c4f 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -466,7 +466,7 @@ reg = <0x83f00000 0x60>; }; - iim: iim@83f98000 { + iim: efuse@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; interrupts = <69>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index afa57bf7b0ed..ed6b0c8b6d6d 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -667,7 +667,7 @@ reg = <0x63f00000 0x60>; }; - iim: iim@63f98000 { + iim: efuse@63f98000 { compatible = "fsl,imx53-iim", "fsl,imx27-iim"; reg = <0x63f98000 0x4000>; interrupts = <69>; -- cgit v1.2.3 From c13168a56560f679e48c8a9bf0e1ce613bc83c39 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 1 Jun 2020 15:54:29 +0800 Subject: ARM: dts: imx6qdl: Remove invalid interrupt for GPC node In latest i.MX6Q RM Rev.6, 05/2020, #90 SPI interrupt is reserved, so remove it from GPC node. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index b047403f05f5..deb09dfb1d06 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -871,8 +871,7 @@ reg = <0x020dc000 0x4000>; interrupt-controller; #interrupt-cells = <3>; - interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, - <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_IPG>; clock-names = "ipg"; -- cgit v1.2.3 From 459ebbee05e83037a9a45c09f9cda918d0b55933 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 2 Jun 2020 14:24:50 +0800 Subject: ARM: dts: imx: Change sdhci node name on i.MX27/i.MX31 SoCs Change i.MX27/i.MX31 node name from sdhci to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx27.dtsi | 6 +++--- arch/arm/boot/dts/imx31.dtsi | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index ee04771729ce..47de96b45a86 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -265,7 +265,7 @@ status = "disabled"; }; - sdhci1: sdhci@10013000 { + sdhci1: mmc@10013000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10013000 0x1000>; interrupts = <11>; @@ -277,7 +277,7 @@ status = "disabled"; }; - sdhci2: sdhci@10014000 { + sdhci2: mmc@10014000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <10>; @@ -431,7 +431,7 @@ status = "disabled"; }; - sdhci3: sdhci@1001e000 { + sdhci3: mmc@1001e000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x1001e000 0x1000>; interrupts = <9>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 4f3d7ab3ce27..eedf2d73496a 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -173,7 +173,7 @@ reg = <0x50000000 0x100000>; ranges; - sdhci1: sdhci@50004000 { + sdhci1: mmc@50004000 { compatible = "fsl,imx31-mmc"; reg = <0x50004000 0x4000>; interrupts = <9>; @@ -184,7 +184,7 @@ status = "disabled"; }; - sdhci2: sdhci@50008000 { + sdhci2: mmc@50008000 { compatible = "fsl,imx31-mmc"; reg = <0x50008000 0x4000>; interrupts = <8>; -- cgit v1.2.3 From 7e4cd9d8f7ba424d0ad52df4acee08343acdd6ce Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 2 Jun 2020 14:24:51 +0800 Subject: ARM: dts: imx: Change esdhc node name on i.MX2/i.MX3/i.MX5 SoCs Change i.MX2/i.MX3/i.MX5 SoCs esdhc node name from esdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 4 ++-- arch/arm/boot/dts/imx35.dtsi | 6 +++--- arch/arm/boot/dts/imx50.dtsi | 8 ++++---- arch/arm/boot/dts/imx51.dtsi | 8 ++++---- arch/arm/boot/dts/imx53.dtsi | 8 ++++---- 5 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 4eaf4eb88e27..b045c6da7ea6 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -453,7 +453,7 @@ interrupts = <22>; }; - esdhc1: esdhc@53fb4000 { + esdhc1: mmc@53fb4000 { compatible = "fsl,imx25-esdhc"; reg = <0x53fb4000 0x4000>; interrupts = <9>; @@ -462,7 +462,7 @@ status = "disabled"; }; - esdhc2: esdhc@53fb8000 { + esdhc2: mmc@53fb8000 { compatible = "fsl,imx25-esdhc"; reg = <0x53fb8000 0x4000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 502112be42bd..e15408794d83 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -231,7 +231,7 @@ #interrupt-cells = <2>; }; - esdhc1: esdhc@53fb4000 { + esdhc1: mmc@53fb4000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fb4000 0x4000>; interrupts = <7>; @@ -240,7 +240,7 @@ status = "disabled"; }; - esdhc2: esdhc@53fb8000 { + esdhc2: mmc@53fb8000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fb8000 0x4000>; interrupts = <8>; @@ -249,7 +249,7 @@ status = "disabled"; }; - esdhc3: esdhc@53fbc000 { + esdhc3: mmc@53fbc000 { compatible = "fsl,imx35-esdhc"; reg = <0x53fbc000 0x4000>; interrupts = <9>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 1f4ecbca5225..377951a8edcf 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -115,7 +115,7 @@ reg = <0x50000000 0x40000>; ranges; - esdhc1: esdhc@50004000 { + esdhc1: mmc@50004000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; @@ -127,7 +127,7 @@ status = "disabled"; }; - esdhc2: esdhc@50008000 { + esdhc2: mmc@50008000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; @@ -176,7 +176,7 @@ status = "disabled"; }; - esdhc3: esdhc@50020000 { + esdhc3: mmc@50020000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; @@ -188,7 +188,7 @@ status = "disabled"; }; - esdhc4: esdhc@50024000 { + esdhc4: mmc@50024000 { compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index c83bc7702c4f..db5827d62c3c 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -185,7 +185,7 @@ reg = <0x70000000 0x40000>; ranges; - esdhc1: esdhc@70004000 { + esdhc1: mmc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; @@ -196,7 +196,7 @@ status = "disabled"; }; - esdhc2: esdhc@70008000 { + esdhc2: mmc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; @@ -245,7 +245,7 @@ status = "disabled"; }; - esdhc3: esdhc@70020000 { + esdhc3: mmc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; @@ -257,7 +257,7 @@ status = "disabled"; }; - esdhc4: esdhc@70024000 { + esdhc4: mmc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ed6b0c8b6d6d..9a4fc995d457 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -236,7 +236,7 @@ reg = <0x50000000 0x40000>; ranges; - esdhc1: esdhc@50004000 { + esdhc1: mmc@50004000 { compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; @@ -248,7 +248,7 @@ status = "disabled"; }; - esdhc2: esdhc@50008000 { + esdhc2: mmc@50008000 { compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; @@ -301,7 +301,7 @@ status = "disabled"; }; - esdhc3: esdhc@50020000 { + esdhc3: mmc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; @@ -313,7 +313,7 @@ status = "disabled"; }; - esdhc4: esdhc@50024000 { + esdhc4: mmc@50024000 { compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; -- cgit v1.2.3 From a6d094403cd670e04193849af69c6c5f67fd742e Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Tue, 2 Jun 2020 14:24:52 +0800 Subject: ARM: dts: imx: Change usdhc node name on i.MX6/i.MX7 SoCs Change i.MX6/i.MX7 SoCs usdhc node name from usdhc to mmc to be compliant with yaml schema, it requires the nodename to be "mmc". Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++---- arch/arm/boot/dts/imx6sl.dtsi | 8 ++++---- arch/arm/boot/dts/imx6sx.dtsi | 8 ++++---- arch/arm/boot/dts/imx6ul.dtsi | 4 ++-- arch/arm/boot/dts/imx7s.dtsi | 6 +++--- 5 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index deb09dfb1d06..346a52fc96d9 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -1056,7 +1056,7 @@ <0 126 IRQ_TYPE_LEVEL_HIGH>; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -1068,7 +1068,7 @@ status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -1080,7 +1080,7 @@ status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 11e7bf315dd0..e2d25328b579 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -854,7 +854,7 @@ status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; @@ -866,7 +866,7 @@ status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +878,7 @@ status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; @@ -890,7 +890,7 @@ status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 995e1b10c978..430c21aa88bf 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -943,7 +943,7 @@ status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -955,7 +955,7 @@ status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; @@ -967,7 +967,7 @@ status = "disabled"; }; - usdhc3: usdhc@2198000 { + usdhc3: mmc@2198000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x02198000 0x4000>; interrupts = ; @@ -979,7 +979,7 @@ status = "disabled"; }; - usdhc4: usdhc@219c000 { + usdhc4: mmc@219c000 { compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; reg = <0x0219c000 0x4000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 2d64802c8b09..e5aab37eb222 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -861,7 +861,7 @@ status = "disabled"; }; - usdhc1: usdhc@2190000 { + usdhc1: mmc@2190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; interrupts = ; @@ -875,7 +875,7 @@ status = "disabled"; }; - usdhc2: usdhc@2194000 { + usdhc2: mmc@2194000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02194000 0x4000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 3cba73142034..1cfaf410aa43 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1126,7 +1126,7 @@ reg = <0x30b30200 0x200>; }; - usdhc1: usdhc@30b40000 { + usdhc1: mmc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; @@ -1138,7 +1138,7 @@ status = "disabled"; }; - usdhc2: usdhc@30b50000 { + usdhc2: mmc@30b50000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; @@ -1150,7 +1150,7 @@ status = "disabled"; }; - usdhc3: usdhc@30b60000 { + usdhc3: mmc@30b60000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; -- cgit v1.2.3 From 5da1b522cf7dc51f7fde2cca8d90406b0291c503 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 2 Jun 2020 18:44:50 +0800 Subject: ARM: dts: imx6sll: Make ssi node name same as other platforms In imx6sll.dtsi, the ssi node name is different with other platforms (imx6qdl, imx6sl, imx6sx), but the sound/soc/fsl/fsl-asoc-card.c machine driver needs to check ssi node name for audmux configuration, then different ssi node name causes issue on imx6sll platform. So we change ssi node name to make all platforms have same name. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sll.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index b715aa7ed599..3d1a689f5dec 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -261,7 +261,7 @@ status = "disabled"; }; - ssi1: ssi-controller@2028000 { + ssi1: ssi@2028000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = ; @@ -274,7 +274,7 @@ status = "disabled"; }; - ssi2: ssi-controller@202c000 { + ssi2: ssi@202c000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = ; @@ -287,7 +287,7 @@ status = "disabled"; }; - ssi3: ssi-controller@2030000 { + ssi3: ssi@2030000 { compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = ; -- cgit v1.2.3 From 8a915ec0c820b50dfa6eaf580f3053c1d81e47fe Mon Sep 17 00:00:00 2001 From: Ian Ray Date: Thu, 16 Apr 2020 16:51:23 +0200 Subject: ARM: dts: imx53-ppd: alarm LEDs use kernel LED interface Use kernel LED interface for the alarm LEDs. Signed-off-by: Ian Ray Signed-off-by: Samu Nuutamo Signed-off-by: Sebastian Reichel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-ppd.dts | 49 +++++++++++++++++++++++++++++++++-------- 1 file changed, 40 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 5ff9a179c83c..34ce41600098 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -176,7 +176,7 @@ power-supply = <®_3v3_lcd>; }; - leds { + leds-brightness { compatible = "pwm-leds"; alarm-brightness { @@ -185,6 +185,32 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_alarmled_pins>; + + alarm1 { + label = "alarm:red"; + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + alarm2 { + label = "alarm:yellow"; + gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + alarm3 { + label = "alarm:blue"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + alarm4 { + label = "alarm:silenced"; + gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; + }; + }; + gpio-poweroff { compatible = "gpio-poweroff"; gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; @@ -909,18 +935,10 @@ MX53_PAD_NANDF_CS3__GPIO6_16 0x0 /* POWER_AND_BOOT_STATUS_INDICATOR */ MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 - /* ACTIVATE_ALARM_LIGHT_RED */ - MX53_PAD_PATA_DIOR__GPIO7_3 0x0 - /* ACTIVATE_ALARM_LIGHT_YELLOW */ - MX53_PAD_PATA_DA_1__GPIO7_7 0x0 - /* ACTIVATE_ALARM_LIGHT_CYAN */ - MX53_PAD_PATA_DA_2__GPIO7_8 0x0 /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ MX53_PAD_GPIO_16__GPIO7_11 0x0 /* BATTERY_STATUS_INDICATOR_AMBER */ MX53_PAD_GPIO_17__GPIO7_12 0x0 - /* AUDIO_ALARMS_SILENCED_INDICATOR */ - MX53_PAD_GPIO_18__GPIO7_13 0x0 >; }; @@ -1080,4 +1098,17 @@ MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 >; }; + + pinctrl_alarmled_pins: qmx6alarmledgrp { + fsl,pins = < + /* ACTIVATE_ALARM_LIGHT_RED */ + MX53_PAD_PATA_DIOR__GPIO7_3 0x0 + /* ACTIVATE_ALARM_LIGHT_YELLOW */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x0 + /* ACTIVATE_ALARM_LIGHT_CYAN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x0 + /* AUDIO_ALARMS_SILENCED_INDICATOR */ + MX53_PAD_GPIO_18__GPIO7_13 0x0 + >; + }; }; -- cgit v1.2.3 From ac887041c8eb54aabed9755d968c257252e068e3 Mon Sep 17 00:00:00 2001 From: Xiaowei Bao Date: Mon, 29 Jun 2020 10:46:34 +0800 Subject: arm64: dts: ls1028a-qds: Add DSPI flash nodes Add the DSPI flash nodes into fsl-ls1028a-qds.dts Signed-off-by: Xiaowei Bao Signed-off-by: Zhao Qiang Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 85 +++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index dd69c5b821e9..e4f00c2b6608 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -107,6 +107,91 @@ }; }; +&dspi0 { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi2 { + bus-num = <2>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &duart0 { status = "okay"; }; -- cgit v1.2.3 From c3a71ffb6df2692b7541af0b3bec589635a04a5a Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 18 Jun 2020 14:03:45 +0800 Subject: ARM: dts: imx6sx: Enable ASRC device Add compatible string, update the clock table, add fsl,asrc-rate and fsl,asrc-width property. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx.dtsi | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 430c21aa88bf..04dda6f59e7b 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -380,18 +380,28 @@ }; asrc: asrc@2034000 { + compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = ; - clocks = <&clks IMX6SX_CLK_ASRC_MEM>, - <&clks IMX6SX_CLK_ASRC_IPG>, - <&clks IMX6SX_CLK_SPDIF>, - <&clks IMX6SX_CLK_SPBA>; - clock-names = "mem", "ipg", "asrck", "spba"; - dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, - <&sdma 19 20 1>, <&sdma 20 20 1>, - <&sdma 21 20 1>, <&sdma 22 20 1>; + clocks = <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, + <&sdma 19 23 1>, <&sdma 20 23 1>, + <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; status = "okay"; }; }; -- cgit v1.2.3 From 903c0ef28bc4aad4cd30548fd330d590e031338b Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 18 Jun 2020 14:03:47 +0800 Subject: ARM: dts: imx6sx-sdb: Add SPDIF support Add SPDIF support. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 3e5fb72f21fc..6673532018b2 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -179,6 +179,15 @@ }; }; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif", + "fsl,imx6sx-sdb-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; + }; &audmux { @@ -296,6 +305,14 @@ status = "disabled"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -562,6 +579,12 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 -- cgit v1.2.3 From 9ef33df18c55e5e705f151d437a8cfa845eaf679 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 18 Jun 2020 14:03:48 +0800 Subject: ARM: dts: imx6sx-sabreauto: Add SPDIF support Add SPDIF support. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sabreauto.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 825924448ab4..772b8ac5d637 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -66,6 +66,13 @@ enable-active-high; vin-supply = <®_can_en>; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + }; }; &anaclk2 { @@ -227,6 +234,12 @@ >; }; + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__SPDIF_IN 0x1b0b0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 @@ -454,6 +467,14 @@ }; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; -- cgit v1.2.3 From a2e4a60de41ce1dfa3cdb6588b2ef8767f3cd8ce Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Thu, 18 Jun 2020 14:03:49 +0800 Subject: ARM: dts: imx6sx-sabreauto: Add cs42888 sound card support Complete the ESAI node and Add cs42888 sound card support. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sabreauto.dts | 75 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sx.dtsi | 4 ++ 2 files changed, 79 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 772b8ac5d637..76a4c06e0ff2 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -67,6 +67,36 @@ vin-supply = <®_can_en>; }; + reg_cs42888: cs42888_supply { + compatible = "regulator-fixed"; + regulator-name = "cs42888_supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound-cs42888 { + compatible = "fsl,imx6-sabreauto-cs42888", + "fsl,imx-audio-cs42888"; + model = "imx-cs42888"; + audio-cpu = <&esai>; + audio-asrc = <&asrc>; + audio-codec = <&cs42888>; + audio-routing = + "Line Out Jack", "AOUT1L", + "Line Out Jack", "AOUT1R", + "Line Out Jack", "AOUT2L", + "Line Out Jack", "AOUT2R", + "Line Out Jack", "AOUT3L", + "Line Out Jack", "AOUT3R", + "Line Out Jack", "AOUT4L", + "Line Out Jack", "AOUT4R", + "AIN1L", "Line In Jack", + "AIN1R", "Line In Jack", + "AIN2L", "Line In Jack", + "AIN2R", "Line In Jack"; + }; + sound-spdif { compatible = "fsl,imx-audio-spdif"; model = "imx-spdif"; @@ -79,6 +109,25 @@ clock-frequency = <24576000>; }; +&clks { + assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>, + <&clks IMX6SX_PLL4_BYPASS>, + <&clks IMX6SX_CLK_PLL4_POST_DIV>; + assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>, + <&clks IMX6SX_PLL4_BYPASS_SRC>; + assigned-clock-rates = <0>, <0>, <24576000>; +}; + +&esai { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esai>; + assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>, + <&clks IMX6SX_CLK_ESAI_EXTAL>; + assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; @@ -200,6 +249,21 @@ >; }; + pinctrl_esai: esaigrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x1b030 + MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x1b030 + MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x1b030 + MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x1b030 + MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x1b030 + MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x1b030 + MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x1b030 + MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x1b030 + MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x1b030 + MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x1b030 + >; + }; + pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b020 @@ -326,6 +390,17 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + cs42888: cs42888@48 { + compatible = "cirrus,cs42888"; + reg = <0x48>; + clocks = <&anaclk2 0>; + clock-names = "mclk"; + VA-supply = <®_cs42888>; + VD-supply = <®_cs42888>; + VLS-supply = <®_cs42888>; + VLC-supply = <®_cs42888>; + }; + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 04dda6f59e7b..5c2b78589aa5 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -325,6 +325,7 @@ }; esai: esai@2024000 { + compatible = "fsl,imx6sx-esai", "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = ; clocks = <&clks IMX6SX_CLK_ESAI_IPG>, @@ -334,6 +335,9 @@ <&clks IMX6SX_CLK_SPBA>; clock-names = "core", "mem", "extal", "fsys", "spba"; + dmas = <&sdma 23 21 0>, + <&sdma 24 21 0>; + dma-names = "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3 From 22b6db783110a6257a5104f6c91cf070729204b1 Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Wed, 24 Jun 2020 10:45:01 +0800 Subject: ARM: dts: ls1021a: add ftm_alarm0 DT node The patch add ftm_alarm0 DT node - add rcpm node - add ftm_alarm0 node - aliases ftm_alarm0 as rtc1 Signed-off-by: Biwen Li Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index b2ff27af090e..069af9a19bb6 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -59,6 +59,7 @@ ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; + rtc1 = &ftm_alarm0; serial0 = &lpuart0; serial1 = &lpuart1; serial2 = &lpuart2; @@ -1002,5 +1003,19 @@ big-endian; }; + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x8>; + #fsl,rcpm-wakeup-cells = <2>; + }; + + ftm_alarm0: timer0@29d0000 { + compatible = "fsl,ls1021a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + reg-names = "ftm"; + fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>; + interrupts = ; + big-endian; + }; }; }; -- cgit v1.2.3 From 73691f21e21117f2cca23fc67407f573ab86cbe2 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Sun, 12 Jul 2020 17:16:42 +0800 Subject: ARM: dts: imx6sx-sdb: Add MQS support Add MQS support. As the pin conflict with usdhc2, then need to add a separate dts. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6sx-sdb-mqs.dts | 48 ++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6sx-sdb.dtsi | 7 ++++++ arch/arm/boot/dts/imx6sx.dtsi | 6 +++++ 4 files changed, 62 insertions(+) create mode 100644 arch/arm/boot/dts/imx6sx-sdb-mqs.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6a1cac0bfc7..04f85d6a2af3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -592,6 +592,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sdb-reva.dtb \ imx6sx-sdb-sai.dtb \ imx6sx-sdb.dtb \ + imx6sx-sdb-mqs.dtb \ imx6sx-softing-vining-2000.dtb \ imx6sx-udoo-neo-basic.dtb \ imx6sx-udoo-neo-extended.dtb \ diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts new file mode 100644 index 000000000000..a4ab2d3e960c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2014 Freescale Semiconductor, Inc. + +#include "imx6sx-sdb.dts" +/ { + + sound { + status = "disabled"; + }; + + sound-mqs { + compatible = "fsl,imx6sx-sdb-mqs", + "fsl,imx-audio-mqs"; + model = "mqs-audio"; + audio-cpu = <&sai1>; + audio-asrc = <&asrc>; + audio-codec = <&mqs>; + }; +}; + +&usdhc2 { + /* pin conflict with mqs*/ + status = "disabled"; +}; + +&mqs { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mqs>; + clocks = <&clks IMX6SX_CLK_SAI1>; + clock-names = "mclk"; + status = "okay"; +}; + +&sai1 { + pinctrl-0 = <>; + status = "okay"; +}; + +&ssi2 { + status = "disabled"; +}; + +&sdma { + gpr = <&gpr>; + /* SDMA event remap for SAI1 */ + fsl,sdma-event-remap = <0 15 1>, <0 16 1>; +}; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 6673532018b2..05d1e9d2efab 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -522,6 +522,13 @@ >; }; + pinctrl_mqs: mqsgrp { + fsl,pins = < + MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0 + MX6SX_PAD_SD2_CMD__MQS_LEFT 0x120b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 5c2b78589aa5..fcb3d064d0cc 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -134,6 +134,12 @@ clock-output-names = "anaclk2"; }; + mqs: mqs { + compatible = "fsl,imx6sx-mqs"; + gpr = <&gpr>; + status = "disabled"; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&gpc>; -- cgit v1.2.3 From 954809fb53a92607eb5fb039e57dcc64363c696d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:05:47 +0200 Subject: ARM: dts: vf610: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache@40006000: $nodename:0: 'l2-cache@40006000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Acked-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 7fd39817f8ab..956182d08e74 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -10,7 +10,7 @@ }; &aips0 { - L2: l2-cache@40006000 { + L2: cache-controller@40006000 { compatible = "arm,pl310-cache"; reg = <0x40006000 0x1000>; cache-unified; -- cgit v1.2.3 From 69cc1502a87f5ed12e27dbe5fe2bfdd5540826c7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:31 +0200 Subject: ARM: dts: imx: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache@a02000: $nodename:0: 'l2-cache@a02000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx35.dtsi | 2 +- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- arch/arm/boot/dts/imx6sl.dtsi | 2 +- arch/arm/boot/dts/imx6sll.dtsi | 2 +- arch/arm/boot/dts/imx6sx.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index e15408794d83..aba16252faab 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -59,7 +59,7 @@ interrupt-parent = <&avic>; ranges; - L2: l2-cache@30000000 { + L2: cache-controller@30000000 { compatible = "arm,l210-cache"; reg = <0x30000000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 346a52fc96d9..3a0e222a1ab8 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -245,7 +245,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index e2d25328b579..eb8aeaa5ccab 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -126,7 +126,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 3d1a689f5dec..554a31ea9c07 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -126,7 +126,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index fcb3d064d0cc..939fda91d447 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -179,7 +179,7 @@ interrupt-parent = <&intc>; }; - L2: l2-cache@a02000 { + L2: cache-controller@a02000 { compatible = "arm,pl310-cache"; reg = <0x00a02000 0x1000>; interrupts = ; -- cgit v1.2.3 From 7c2b325020be7d5ec375501c2aead46fc0496c17 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Wed, 1 Jul 2020 11:46:56 +0800 Subject: ARM: dts: imx6ul: Add ASRC device node Add ASRC device node. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index e5aab37eb222..974545856470 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -341,6 +341,31 @@ dma-names = "rx", "tx"; status = "disabled"; }; + + asrc: asrc@2034000 { + compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc"; + reg = <0x2034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6UL_CLK_ASRC_IPG>, + <&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>, + <&clks IMX6UL_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck_0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f", "spba"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; + }; }; tsc: tsc@2040000 { -- cgit v1.2.3 From 0d446a505592dc3869d1d9f28121663da9f471fa Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 1 Jul 2020 15:03:27 +0200 Subject: ARM: dts: add Protonic PRTI6Q board Protonic PRTI6Q is a development board and a base class for different specific customer application boards based on the i.MX6 family of SoCs, developed by Protonic Holland. Reviewed-by: Rob Herring Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-prti6q.dts | 543 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 163 ++++++++++ 3 files changed, 707 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 04f85d6a2af3..0521e7dee922 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -543,6 +543,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-pico-nymph.dtb \ imx6q-pico-pi.dtb \ imx6q-pistachio.dtb \ + imx6q-prti6q.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts new file mode 100644 index 000000000000..de6cbaab8b49 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include +#include + +/ { + model = "Protonic PRTI6Q board"; + compatible = "prt,prti6q", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0xf0000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 16 64 255>; + num-interpolated-steps = <16>; + default-brightness-level = <1>; + power-supply = <®_3v3>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + can_osc: can-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led-debug1 { + function = LED_FUNCTION_SD; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + }; + + panel { + compatible = "kyo,tcg121xglp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_wifi: regulator-wifi { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + enable-active-high; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "regulator-WL12xx"; + startup-delay-us = <70000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>; + status = "okay"; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can3>; + clocks = <&can_osc>; + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <5000000>; + }; + + adc@1 { + compatible = "ti,adc128s052"; + reg = <1>; + spi-max-frequency = <2000000>; + vref-supply = <®_3v3>; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-handle = <&rgmii_phy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Microchip KSZ9031RNX PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +/* DDC */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* can2_l */ + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can2_h */ + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_l */ + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_h */ + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg { + pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + vmmc-supply = <®_wifi>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + wifi { + compatible = "ti,wl1271"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi>; + interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = "38400000"; + tcxo-clock-frequency = "19200000"; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can2: can2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b008 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b008 + >; + }; + + pinctrl_can3: can3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ecspi2_cs: ecspi2csgrp { + fsl,pins = < + /* ADC128S022 CS */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + /* NOTE: DDC is done via I2C2, so DON'T + * configure DDC pins for HDMI! + */ + MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + /* DDC */ + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0 + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg_id: usbotgidgrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + /* WL12xx IRQ */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi new file mode 100644 index 000000000000..19578f660b09 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart4; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_h1_vbus: regulator-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&can1 { + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + temperature-sensor@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + phy_type = "utmi"; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b008 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b008 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099 + MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; +}; -- cgit v1.2.3 From 88010b8174ab3d91d6374e343443901b90e87525 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 1 Jul 2020 15:03:28 +0200 Subject: ARM: dts: add Protonic WD2 board Add support for the Protonic WD2 board, which is an internal development platform for low-cost agricultural Virtual Terminals based on COTS tablets and web applications. It inherits from the PRTI6Q base class. Reviewed-by: Rob Herring Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-prtwd2.dts | 188 +++++++++++++++++++++++++++++++++++++ 2 files changed, 189 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0521e7dee922..a8d27e56c763 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -544,6 +544,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-pico-pi.dtb \ imx6q-pistachio.dtb \ imx6q-prti6q.dtb \ + imx6q-prtwd2.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts new file mode 100644 index 000000000000..dffafbcaa7af --- /dev/null +++ b/arch/arm/boot/dts/imx6q-prtwd2.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2018 Protonic Holland + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include + +/ { + model = "Protonic WD2 board"; + compatible = "prt,prtwd2", "fsl,imx6q"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_npd>; + reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; + }; + + /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */ + i2c@4 { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <20>; /* ~10 kHz */ + i2c-gpio,scl-output-only; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>; + clock-names = "ipg", "ahb"; + status = "okay"; + + fixed-link { + speed = <100>; + pause; + full-duplex; + }; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* V in */ + channel@4 { + reg = <4>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* I charge */ + channel@5 { + reg = <5>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* V bus */ + channel@6 { + reg = <6>; + ti,gain = <1>; + ti,datarate = <3>; + }; + + /* nc */ + channel@7 { + reg = <7>; + ti,gain = <1>; + ti,datarate = <3>; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + mmc-pwrseq = <&usdhc2_wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth_chg>; + + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + /* MX6QDL_ENET_PINGRP4 */ + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x130b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0 + /* nINTRP */ + MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1f8b0 + MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f8b0 + >; + }; + + pinctrl_usb_eth_chg: usbethchggrp { + fsl,pins = < + /* USB charging control */ + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_wifi_npd: wifinpd { + fsl,pins = < + /* WL_REG_ON */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069 + >; + }; +}; -- cgit v1.2.3 From 5a1dcf4a6bec61d3e0b76d5e659e550a49342038 Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 1 Jul 2020 15:03:29 +0200 Subject: ARM: dts: add Protonic VT7 board The Protonic VT7 is a mid-class ISObus Virtual Terminal with a 7 inch touchscreen display. Reviewed-by: Rob Herring Signed-off-by: Robin van der Gracht Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-prtvt7.dts | 411 ++++++++++++++++++++++++++++++++++++ 2 files changed, 412 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a8d27e56c763..8750c3be9eca 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -455,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-pico-hobbit.dtb \ imx6dl-pico-nymph.dtb \ imx6dl-pico-pi.dtb \ + imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts new file mode 100644 index 000000000000..306b4f7bf762 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts @@ -0,0 +1,411 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2016 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include +#include +#include + +/ { + model = "Protonic VT7"; + compatible = "prt,prtvt7", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x20000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 500000>; + brightness-levels = <0 20 81 248 1000>; + default-brightness-level = <20>; + num-interpolated-steps = <21>; + power-supply = <®_bl_12v0>; + enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + }; + + keys { + compatible = "gpio-keys"; + autorepeat; + + esc { + label = "GPIO Key ESC"; + linux,code = ; + gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>; + }; + + up { + label = "GPIO Key UP"; + linux,code = ; + gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = ; + gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>; + }; + + enter { + label = "GPIO Key Enter"; + linux,code = ; + gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>; + }; + + cycle { + label = "GPIO Key CYCLE"; + linux,code = ; + gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>; + }; + + f1 { + label = "GPIO Key F1"; + linux,code = ; + gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>; + }; + + f2 { + label = "GPIO Key F2"; + linux,code = ; + gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>; + }; + + f3 { + label = "GPIO Key F3"; + linux,code = ; + gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>; + }; + + f4 { + label = "GPIO Key F4"; + linux,code = ; + gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>; + }; + + f5 { + label = "GPIO Key F5"; + linux,code = ; + gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>; + }; + + f6 { + label = "GPIO Key F6"; + linux,code = ; + gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>; + }; + + f7 { + label = "GPIO Key F7"; + linux,code = ; + gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>; + }; + + f8 { + label = "GPIO Key F8"; + linux,code = ; + gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>; + }; + + f9 { + label = "GPIO Key F9"; + linux,code = ; + gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>; + }; + + f10 { + label = "GPIO Key F10"; + linux,code = ; + gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_bl_12v0: regulator-bl-12v0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_bl_12v0>; + regulator-name = "bl-12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "prti6q-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Line", "Line In Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + system-clock-frequency = <0>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + bitclock-master; + frame-master; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; + + mux-ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN 0 + IMX_AUDMUX_V2_PTCR_TFSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TCSEL(2) 0 + IMX_AUDMUX_V2_PTCR_TFSDIR 0 + IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2) + >; + }; + + mux-pins3 { + fsl,audmux-port = <2>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0) + 0 IMX_AUDMUX_V2_PDCR_TXRXEN + >; + }; +}; + +&can1 { + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + +&ecspi2 { + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&i2c1 { + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; + #sound-dai-cells = <0>; + clocks = <&clks 201>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <®_3v3>; + VDDD-supply = <®_1v8>; + }; +}; + +&i2c3 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + gpio_pca: gpio@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&ipu1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + status = "okay"; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&ssi1 { + #sound-dai-cells = <0>; + fsl,mode = "ac97-slave"; + status = "okay"; +}; + +&usbh1 { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 + >; + }; + + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_codec: codecgrp { + fsl,pins = < + /* AUDIO_nRESET */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + /* ITU656_nRESET */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + /* ITU656_nPDN */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 + >; + }; + + pinctrl_ipu1_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xb0 + + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0 + + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0 + + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + >; + }; + + pinctrl_reg_bl_12v0: 12blgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + >; + }; + + pinctrl_tsc: tscgrp { + + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + >; + }; +}; -- cgit v1.2.3 From c90fdc5021b10761e762a1f26ecee4f870bd823b Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Wed, 1 Jul 2020 15:03:30 +0200 Subject: ARM: dts: add Protonic RVT board Protonic RVT is an internal development platform for a wireless ISObus Virtual Terminal based on COTS tablets, and the predecessor of the WD2 platform. Reviewed-by: Rob Herring Signed-off-by: David Jander Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-prtrvt.dts | 184 ++++++++++++++++++++++++++++++++++++ 2 files changed, 185 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8750c3be9eca..b0334bcbda9d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -455,6 +455,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-pico-hobbit.dtb \ imx6dl-pico-nymph.dtb \ imx6dl-pico-pi.dtb \ + imx6dl-prtrvt.dtb \ imx6dl-prtvt7.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts new file mode 100644 index 000000000000..fa882458957b --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include + +/ { + model = "Protonic RVT board"; + compatible = "prt,prtrvt", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + nfc@0 { + compatible = "ti,trf7970a"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + spi-max-frequency = <2000000>; + interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>; + ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, + <&gpio5 11 GPIO_ACTIVE_LOW>; + vin-supply = <®_3v3>; + vin-voltage-override = <3100000>; + autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; + t5t-rmb-extra-byte-quirk; + status = "okay"; + }; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* nc */ + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* nc */ + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_l */ + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_h */ + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pcie { + status = "okay"; +}; + +&usbh1 { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; + +&iomuxc { + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + /* NFC_ASK_OOK */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1 + /* NFC_PWR_EN */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1 + /* NFC_EN2 */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1 + /* NFC_EN */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + /* NFC_MOD */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + /* NFC_IRQ */ + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + >; + }; +}; -- cgit v1.2.3 From af3eaa4ab0961c25ab6baa37295a08568d78e8d3 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 10 Jul 2020 16:30:47 +0800 Subject: ARM: dts: imx6qp-sabreauto: enable sata Enable SATA on iMX6QP SABREAUTO board. Signed-off-by: Richard Zhu Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qp-sabreauto.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts index d4caeeb0af70..639d9dd35377 100644 --- a/arch/arm/boot/dts/imx6qp-sabreauto.dts +++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts @@ -50,6 +50,10 @@ status = "disabled"; }; +&sata { + status = "okay"; +}; + &vgen3_reg { regulator-always-on; }; -- cgit v1.2.3 From d4650bd53f50bcebfcc59d056e5ca4b3a957e811 Mon Sep 17 00:00:00 2001 From: Richard Zhu Date: Fri, 10 Jul 2020 16:30:48 +0800 Subject: ARM: dts: imx6qp-sabresd: enable sata Enable SATA on iMX6QP SABRESD board. Signed-off-by: Richard Zhu Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts index f1b9cb104fdd..480e73183f6b 100644 --- a/arch/arm/boot/dts/imx6qp-sabresd.dts +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts @@ -53,3 +53,7 @@ &pcie { status = "disabled"; }; + +&sata { + status = "okay"; +}; -- cgit v1.2.3 From 493e8733686bfce4fe04683dce8569a5e6c6d071 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 7 Jul 2020 14:13:59 -0700 Subject: ARM: dts: vfxxx: Add node for CAAM Add node for CAAM device in NXP Vybrid SoC. Signed-off-by: Andrey Smirnov Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 2d547e7b21ad..0fe03aa0367f 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -729,6 +729,28 @@ dma-names = "rx","tx"; status = "disabled"; }; + + crypto: crypto@400f0000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400f0000 0x9000>; + ranges = <0 0x400f0000 0x9000>; + clocks = <&clks VF610_CLK_CAAM>; + clock-names = "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <102 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; }; -- cgit v1.2.3 From b955387667ec9e33d268189597d2855027112db5 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Tue, 7 Jul 2020 18:16:27 -0700 Subject: ARM: dts: ZII: update MDIO speed and preamble Update MDIO configuration with ZII devices to fully utilize MDIO endpoint capabilities. All devices support 12.5MHz clock and don't require MDIO preable. Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 2 ++ arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 ++ arch/arm/boot/dts/vf610-zii-dev.dtsi | 2 ++ arch/arm/boot/dts/vf610-zii-spb4.dts | 2 ++ arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 2 ++ arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 2 ++ 6 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 20350e803377..5af9ce977b12 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -719,6 +719,8 @@ mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch: switch@0 { diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index ce1920c052fc..64e0e9509226 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -158,6 +158,8 @@ mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index 95d0060fb56c..f8299f33a692 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -137,6 +137,8 @@ mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 55b4201e27f6..a68eae88174a 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -119,6 +119,8 @@ mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index a6c22a79779e..fa5ac9125af7 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -105,6 +105,8 @@ mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 3d05c894bdc0..801133154e3d 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -133,6 +133,8 @@ mdio1: mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch0: switch0@0 { -- cgit v1.2.3 From bcf9d4672916a84f2856572fad3e3b76e426147d Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Wed, 8 Jul 2020 16:25:01 -0700 Subject: ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX The SFF soldered onto the board expects the port to use 1000BaseX. It makes no sense to have the port set to SGMII, since it doesn't even support that mode. Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 778e02c000d1..de79dcfd32e6 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -164,7 +164,7 @@ port@9 { reg = <9>; label = "sff2"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff2>; }; -- cgit v1.2.3 From 5c73d9acd1220d4ae32d3803a8e3205f994ef7c7 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 8 Jul 2020 17:11:54 -0700 Subject: ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX The SFF soldered onto the board expect the ports to use 1000BaseX. It makes no sense to have the ports set to SGMII, since they don't even support that mode. Signed-off-by: Andrew Lunn Signed-off-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index b642520199ba..040a1f8b6130 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -186,7 +186,7 @@ port@2 { reg = <2>; label = "eth_fc_1000_2"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff1>; }; @@ -194,7 +194,7 @@ port@3 { reg = <3>; label = "eth_fc_1000_3"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff2>; }; @@ -202,7 +202,7 @@ port@4 { reg = <4>; label = "eth_fc_1000_4"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff3>; }; @@ -210,7 +210,7 @@ port@5 { reg = <5>; label = "eth_fc_1000_5"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff4>; }; @@ -218,7 +218,7 @@ port@6 { reg = <6>; label = "eth_fc_1000_6"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff5>; }; @@ -226,7 +226,7 @@ port@7 { reg = <7>; label = "eth_fc_1000_7"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff6>; }; @@ -234,7 +234,7 @@ port@9 { reg = <9>; label = "eth_fc_1000_1"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff0>; }; @@ -269,7 +269,7 @@ port@2 { reg = <2>; label = "eth_fc_1000_8"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff7>; }; @@ -277,7 +277,7 @@ port@3 { reg = <3>; label = "eth_fc_1000_9"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff8>; }; @@ -285,7 +285,7 @@ port@4 { reg = <4>; label = "eth_fc_1000_10"; - phy-mode = "sgmii"; + phy-mode = "1000base-x"; managed = "in-band-status"; sfp = <&sff9>; }; -- cgit v1.2.3 From fa28d8212ede9c533ae87a737571a9d3b3eebb29 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 10 Jul 2020 07:19:37 +0200 Subject: ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The imx-pwm driver supports 3 cells and this is the more flexible setting. So use it by default and overwrite it back to two for the files that reference the PWMs with just 2 cells to minimize changes. This allows to drop explicit setting to 3 cells for the boards that already depend on this. The boards that are now using 2 cells explicitly can be converted to 3 individually. Signed-off-by: Uwe Kleine-König Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx1.dtsi | 2 +- arch/arm/boot/dts/imx25.dtsi | 8 ++++---- arch/arm/boot/dts/imx27.dtsi | 2 +- arch/arm/boot/dts/imx31.dtsi | 2 +- arch/arm/boot/dts/imx50.dtsi | 4 ++-- arch/arm/boot/dts/imx51-ts4800.dts | 1 + arch/arm/boot/dts/imx51.dtsi | 4 ++-- arch/arm/boot/dts/imx53-kp.dtsi | 8 ++++++++ arch/arm/boot/dts/imx53-m53evk.dts | 1 + arch/arm/boot/dts/imx53-ppd.dts | 2 ++ arch/arm/boot/dts/imx53-tqma53.dtsi | 8 ++++++++ arch/arm/boot/dts/imx53-tx53.dtsi | 1 - arch/arm/boot/dts/imx53.dtsi | 4 ++-- arch/arm/boot/dts/imx6dl-aristainetos_4.dts | 1 + arch/arm/boot/dts/imx6dl-aristainetos_7.dts | 1 + arch/arm/boot/dts/imx6dl-mamoj.dts | 1 + arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 - arch/arm/boot/dts/imx6q-ba16.dtsi | 1 + arch/arm/boot/dts/imx6q-dhcom-pdk2.dts | 1 - arch/arm/boot/dts/imx6q-display5.dtsi | 1 - arch/arm/boot/dts/imx6q-kp.dtsi | 2 ++ arch/arm/boot/dts/imx6q-mccmon6.dts | 1 - arch/arm/boot/dts/imx6q-novena.dts | 1 + arch/arm/boot/dts/imx6q-pistachio.dts | 1 + arch/arm/boot/dts/imx6q-var-dt6customboard.dts | 1 + arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1 + arch/arm/boot/dts/imx6qdl-apf6dev.dtsi | 1 + arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 1 + arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 + arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 1 + arch/arm/boot/dts/imx6qdl-emcon.dtsi | 3 +++ arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 1 + arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 1 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 1 + arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 1 + arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 1 + arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 1 + arch/arm/boot/dts/imx6qdl-icore.dtsi | 1 + arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 2 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 3 +++ arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 2 ++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 ++ arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 1 + arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 1 + arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 3 +++ arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 + arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 1 + arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 -- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++---- arch/arm/boot/dts/imx6sl-evk.dts | 1 + arch/arm/boot/dts/imx6sl.dtsi | 8 ++++---- arch/arm/boot/dts/imx6sll-evk.dts | 1 + arch/arm/boot/dts/imx6sll.dtsi | 8 ++++---- arch/arm/boot/dts/imx6sx-nitrogen6sx.dts | 1 + arch/arm/boot/dts/imx6sx-sdb.dtsi | 1 + arch/arm/boot/dts/imx6sx-softing-vining-2000.dts | 3 +++ arch/arm/boot/dts/imx6sx.dtsi | 16 ++++++++-------- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 1 + arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 1 + arch/arm/boot/dts/imx6ul-geam.dts | 1 + arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi | 1 + arch/arm/boot/dts/imx6ul-isiot.dtsi | 1 + arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts | 1 + arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 1 + arch/arm/boot/dts/imx6ul-pico.dtsi | 1 + arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 1 - arch/arm/boot/dts/imx6ul.dtsi | 16 ++++++++-------- arch/arm/boot/dts/imx6ull-colibri.dtsi | 4 ---- 68 files changed, 116 insertions(+), 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi index b30448cde582..9b940987864c 100644 --- a/arch/arm/boot/dts/imx1.dtsi +++ b/arch/arm/boot/dts/imx1.dtsi @@ -125,7 +125,7 @@ }; pwm: pwm@208000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; interrupts = <34>; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index b045c6da7ea6..1ab19f1268f8 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -411,7 +411,7 @@ pwm2: pwm@53fa0000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fa0000 0x4000>; clocks = <&clks 106>, <&clks 52>; clock-names = "ipg", "per"; @@ -430,7 +430,7 @@ pwm3: pwm@53fa8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fa8000 0x4000>; clocks = <&clks 107>, <&clks 52>; clock-names = "ipg", "per"; @@ -488,7 +488,7 @@ pwm4: pwm@53fc8000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fc8000 0x4000>; clocks = <&clks 108>, <&clks 52>; clock-names = "ipg", "per"; @@ -535,7 +535,7 @@ pwm1: pwm@53fe0000 { compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; - #pwm-cells = <2>; + #pwm-cells = <3>; reg = <0x53fe0000 0x4000>; clocks = <&clks 105>, <&clks 52>; clock-names = "ipg", "per"; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 47de96b45a86..fc0b318f8733 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -134,7 +134,7 @@ }; pwm: pwm@10006000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index eedf2d73496a..45333f7e10ea 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -327,7 +327,7 @@ interrupts = <26>; clocks = <&clks 10>, <&clks 42>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 377951a8edcf..b6b2e6af9b96 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -289,7 +289,7 @@ }; pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -299,7 +299,7 @@ }; pwm2: pwm@53fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 4344632f7940..6ecb83e7f336 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -113,6 +113,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm_backlight>; status = "okay"; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index db5827d62c3c..985e1be03ad6 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -400,7 +400,7 @@ }; pwm1: pwm@73fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -410,7 +410,7 @@ }; pwm2: pwm@73fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi index 8b25416a5303..4508f34139a0 100644 --- a/arch/arm/boot/dts/imx53-kp.dtsi +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -162,6 +162,14 @@ >; }; +&pwm1 { + #pwm-cells = <2>; +}; + +&pwm2 { + #pwm-cells = <2>; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index daab56abe94a..a1a6228d1aa6 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -321,6 +321,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 34ce41600098..f7dcdf96e5c0 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -624,12 +624,14 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index ea90fd95ad01..9a6cb138adf3 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -209,6 +209,14 @@ }; }; +&pwm1 { + #pwm-cells = <2>; +}; + +&pwm2 { + #pwm-cells = <2>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 4ab135906949..7c9730f3f820 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -542,7 +542,6 @@ &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - #pwm-cells = <3>; }; &sdma { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 9a4fc995d457..500eeaa3a27c 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -525,7 +525,7 @@ }; pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, @@ -535,7 +535,7 @@ }; pwm2: pwm@53fb8000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts index 37f80ab8ccd0..809ca5611072 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -79,5 +79,6 @@ }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts index 8d8c8c27e482..4d58cb4436d9 100644 --- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -69,5 +69,6 @@ }; &pwm3 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 385ce7b0029e..028951955bde 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -303,6 +303,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 2b9423d55c37..c4a235d212b6 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -540,7 +540,6 @@ }; &pwm1 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index 37c63402157b..fc81f2f4b62d 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -334,6 +334,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts index a2dd7e549568..a685b1c3208f 100644 --- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts @@ -253,7 +253,6 @@ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi index 83524bb99eb3..fef5d7254536 100644 --- a/arch/arm/boot/dts/imx6q-display5.dtsi +++ b/arch/arm/boot/dts/imx6q-display5.dtsi @@ -399,7 +399,6 @@ }; &pwm2 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi index 24c8169baf44..1ade0bff681d 100644 --- a/arch/arm/boot/dts/imx6q-kp.dtsi +++ b/arch/arm/boot/dts/imx6q-kp.dtsi @@ -378,12 +378,14 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts index a4d295455e67..55692c73943d 100644 --- a/arch/arm/boot/dts/imx6q-mccmon6.dts +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts @@ -237,7 +237,6 @@ }; &pwm2 { - #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 69f170ff31c5..52e3567d1859 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -455,6 +455,7 @@ }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts index a31b17eaf51c..7a33e54cc0f1 100644 --- a/arch/arm/boot/dts/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/imx6q-pistachio.dts @@ -570,6 +570,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index c54362fcc508..a57c2e3a8435 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -203,6 +203,7 @@ }; &pwm2 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index e34be8fabd93..dbdd7db60325 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -371,6 +371,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index b8e74ab3c993..2577eb4f535a 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -211,6 +211,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 376750882ed3..d38630d4b892 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -336,6 +336,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 240b86d2eb71..1d9f527c04bb 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -312,6 +312,7 @@ /* Colibri PWM */ &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index e3be453d8a4a..67042793b0ca 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -233,6 +233,7 @@ }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi index 70d26616d771..35e230f991f1 100644 --- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi +++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi @@ -737,14 +737,17 @@ }; &pwm1 { + #pwm-cells = <2>; status = "okay"; }; &pwm3 { + #pwm-cells = <2>; status = "okay"; }; &pwm4 { + #pwm-cells = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 60563ff0b7ce..65fe66f0c9ad 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -365,6 +365,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 8942bec65c5c..545b7831692d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -356,6 +356,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index c40583dbd96d..52fbc6719fab 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -419,6 +419,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default", "state_dio"; pinctrl-0 = <&pinctrl_pwm4_backlight>; pinctrl-1 = <&pinctrl_pwm4_dio>; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 69ca70d3baa8..d295898f1dec 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -471,6 +471,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index aee9221f0f29..201c17b15df2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -365,6 +365,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 76d6cf57f1c3..b30c1487252d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -401,6 +401,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 756f3a9f1b4f..f2f475ea74e0 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -245,6 +245,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index 2418cf8f2317..d526f01a2c52 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -497,6 +497,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -509,6 +510,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index c3415aa348a2..185a1a31ca39 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -736,12 +736,14 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; @@ -754,6 +756,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index ed53f07c6b7b..4bbe54e1ddb5 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -639,6 +639,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -651,6 +652,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 8b0e432099b5..c63e1bc1ad3a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -596,6 +596,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; @@ -608,6 +609,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi index 9ebd438dce7d..019938562aa9 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi @@ -218,6 +218,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index cf628465cd0a..55f736dbee0b 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -800,6 +800,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 8468216dae9b..95f9ddab5996 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -687,18 +687,21 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 28b35ccb3757..550e22511e34 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -729,6 +729,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi index a616e3c400d3..02e6d36e85fa 100644 --- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi @@ -140,6 +140,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index c68cb90fd801..362e65ccaa78 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -738,14 +738,12 @@ &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; - #pwm-cells = <3>; status = "disabled"; }; &pwm2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 3a0e222a1ab8..43edbf1156c7 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -499,7 +499,7 @@ }; pwm1: pwm@2080000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; @@ -510,7 +510,7 @@ }; pwm2: pwm@2084000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; @@ -521,7 +521,7 @@ }; pwm3: pwm@2088000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -532,7 +532,7 @@ }; pwm4: pwm@208c000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index bc86cfaaa9c2..b1b069e723d2 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -575,6 +575,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index eb8aeaa5ccab..1c7180f28539 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -334,7 +334,7 @@ }; pwm1: pwm@2080000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; @@ -344,7 +344,7 @@ }; pwm2: pwm@2084000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; @@ -354,7 +354,7 @@ }; pwm3: pwm@2088000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; @@ -364,7 +364,7 @@ }; pwm4: pwm@208c000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts index 5ace9e6acf85..c755cbdb7cde 100644 --- a/arch/arm/boot/dts/imx6sll-evk.dts +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -260,6 +260,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index 554a31ea9c07..fb5d3bc50c6b 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -321,7 +321,7 @@ clocks = <&clks IMX6SLL_CLK_PWM1>, <&clks IMX6SLL_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm2: pwm@2084000 { @@ -331,7 +331,7 @@ clocks = <&clks IMX6SLL_CLK_PWM2>, <&clks IMX6SLL_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm3: pwm@2088000 { @@ -341,7 +341,7 @@ clocks = <&clks IMX6SLL_CLK_PWM3>, <&clks IMX6SLL_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm4: pwm@208c000 { @@ -351,7 +351,7 @@ clocks = <&clks IMX6SLL_CLK_PWM4>, <&clks IMX6SLL_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; gpt1: timer@2098000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index d84ea6999377..66af78e83b70 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -229,6 +229,7 @@ }; &pwm4 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index 05d1e9d2efab..661f803983a1 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -290,6 +290,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 6b728b03f1f2..d25e27d0315f 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -505,18 +505,21 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; &pwm2 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm2>; status = "okay"; }; &pwm6 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 939fda91d447..b480dfa9e251 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -423,7 +423,7 @@ clocks = <&clks IMX6SX_CLK_PWM1>, <&clks IMX6SX_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm2: pwm@2084000 { @@ -433,7 +433,7 @@ clocks = <&clks IMX6SX_CLK_PWM2>, <&clks IMX6SX_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm3: pwm@2088000 { @@ -443,7 +443,7 @@ clocks = <&clks IMX6SX_CLK_PWM3>, <&clks IMX6SX_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm4: pwm@208c000 { @@ -453,7 +453,7 @@ clocks = <&clks IMX6SX_CLK_PWM4>, <&clks IMX6SX_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; flexcan1: can@2090000 { @@ -1357,7 +1357,7 @@ clocks = <&clks IMX6SX_CLK_PWM5>, <&clks IMX6SX_CLK_PWM5>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm6: pwm@22a8000 { @@ -1367,7 +1367,7 @@ clocks = <&clks IMX6SX_CLK_PWM6>, <&clks IMX6SX_CLK_PWM6>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm7: pwm@22ac000 { @@ -1377,7 +1377,7 @@ clocks = <&clks IMX6SX_CLK_PWM7>, <&clks IMX6SX_CLK_PWM7>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; pwm8: pwm@22b0000 { @@ -1387,7 +1387,7 @@ clocks = <&clks IMX6SX_CLK_PWM8>, <&clks IMX6SX_CLK_PWM8>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 265bf4108cb6..64c2d1e9f7fc 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -228,6 +228,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 5d3805b07032..a0bbec57ddc7 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -168,6 +168,7 @@ }; &pwm5 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index 9f63706383a7..a0097da03f38 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -195,6 +195,7 @@ }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi index 18966350bfd8..935a77d717a6 100644 --- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi +++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi @@ -155,6 +155,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index cc9adce638f5..14fc4828ba4e 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -187,6 +187,7 @@ }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts index 5bad29683cc3..5bfad4655b22 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts @@ -41,6 +41,7 @@ }; &pwm7 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi index f05e91841202..239124fc3093 100644 --- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi +++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi @@ -153,6 +153,7 @@ }; &pwm8 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm8>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi index df1da98ab10f..357ffb2f5ad6 100644 --- a/arch/arm/boot/dts/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -175,6 +175,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index bb6dbfd5546b..938a32ced88d 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -549,7 +549,6 @@ &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; - #pwm-cells = <3>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 974545856470..2b088f210331 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -386,7 +386,7 @@ clocks = <&clks IMX6UL_CLK_PWM1>, <&clks IMX6UL_CLK_PWM1>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -397,7 +397,7 @@ clocks = <&clks IMX6UL_CLK_PWM2>, <&clks IMX6UL_CLK_PWM2>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -408,7 +408,7 @@ clocks = <&clks IMX6UL_CLK_PWM3>, <&clks IMX6UL_CLK_PWM3>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -419,7 +419,7 @@ clocks = <&clks IMX6UL_CLK_PWM4>, <&clks IMX6UL_CLK_PWM4>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -759,7 +759,7 @@ clocks = <&clks IMX6UL_CLK_PWM5>, <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -770,7 +770,7 @@ clocks = <&clks IMX6UL_CLK_PWM6>, <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -781,7 +781,7 @@ clocks = <&clks IMX6UL_CLK_PWM7>, <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; @@ -792,7 +792,7 @@ clocks = <&clks IMX6UL_CLK_PWM8>, <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; - #pwm-cells = <2>; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 9145c536d71a..6cf95939121d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -145,25 +145,21 @@ &pwm4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm4>; - #pwm-cells = <3>; }; &pwm5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm5>; - #pwm-cells = <3>; }; &pwm6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm6>; - #pwm-cells = <3>; }; &pwm7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm7>; - #pwm-cells = <3>; }; &sdma { -- cgit v1.2.3 From c68a1c9253c3b66b63feb7f30cba6bd7662eb83d Mon Sep 17 00:00:00 2001 From: Philippe Schenker Date: Fri, 10 Jul 2020 15:24:21 +0200 Subject: ARM: dts: colibri-imx6: remove pinctrl-names orphan This is not necessary without a pinctrl-0 statement. Remove this orphan. Signed-off-by: Philippe Schenker Reviewed-by: Oleksandr Suvorov Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 1d9f527c04bb..0930194fd960 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -363,7 +363,6 @@ }; &usbotg { - pinctrl-names = "default"; disable-over-current; dr_mode = "peripheral"; status = "disabled"; -- cgit v1.2.3 From 93e881e1f1f5e8e606ada00ea6ff4a2367095ec6 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Sun, 12 Jul 2020 01:03:57 -0700 Subject: ARM: dts: vf610-zii-spb4: Add node for switch watchdog Add I2C child node for switch watchdog present on SPB4 Signed-off-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-spb4.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index a68eae88174a..9e5187ba3fa6 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -209,6 +209,18 @@ }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; @@ -326,6 +338,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD3__GPIO_82 0x31c2 -- cgit v1.2.3 From f9ecf10cb88c5ff47add3acb3611c4f1052be5f5 Mon Sep 17 00:00:00 2001 From: Parthiban Nallathambi Date: Mon, 13 Jul 2020 09:23:20 +0200 Subject: ARM: dts: imx6ull: add MYiR MYS-6ULX SBC Add support for the MYiR imx6ULL based single board computer equipped with on board 256MB NAND & RAM. The board also provides expansion header for expansion board, but this commit adds only support for SBC. Signed-off-by: Parthiban Nallathambi Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts | 18 ++ arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi | 238 +++++++++++++++++++++++ 3 files changed, 257 insertions(+) create mode 100644 arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts create mode 100644 arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b0334bcbda9d..328e51143460 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -622,6 +622,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri-eval-v3.dtb \ imx6ull-colibri-wifi-eval-v3.dtb \ + imx6ull-myir-mys-6ulx-eval.dtb \ imx6ull-opos6uldev.dtb \ imx6ull-phytec-segin-ff-rdk-nand.dtb \ imx6ull-phytec-segin-ff-rdk-emmc.dtb \ diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts new file mode 100644 index 000000000000..ecbb2cc5b9ab --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi + */ + +/dts-v1/; +#include "imx6ull.dtsi" +#include "imx6ull-myir-mys-6ulx.dtsi" + +/ { + model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND"; + compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull"; +}; + +&gpmi { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi new file mode 100644 index 000000000000..d03694feaf5c --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Linumiz + * Author: Parthiban Nallathambi + */ + +#include +#include +#include + +/ { + model = "MYiR MYS-6ULX Single Board Computer"; + compatible = "fsl,imx6ull"; + + chosen { + stdout-path = &uart1; + }; + + reg_vdd_5v: regulator-vdd-5v { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vdd_5v>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + phy-supply = <®_vdd_3v3>; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clks IMX6UL_CLK_ENET_REF>; + clock-names = "rmii-ref"; + }; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_vdd_3v3>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <8>; + non-removable; + keep-power-in-suspend; + vmmc-supply = <®_vdd_3v3>; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x0b0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x0b0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0x0b0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0b0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x0b0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x0b0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x0b0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x0b0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x0b0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x0b0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x0b0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x0b0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x0b0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100b9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170b9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; +}; -- cgit v1.2.3 From 574d9cff7e5a4536e0687736a68b9fe88873d32d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 08:51:45 +0200 Subject: arm64: tegra: Enable XUSB on Norrin Use the XUSB controller instead of the legacy EHCI controller to enable USB 3.0 support. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 140 ++++++++++++++++++----- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 148 ++++++++++++++++++++++--- 2 files changed, 246 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index e6fe62e5c234..761ad05d9acb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -671,7 +671,7 @@ regulator-boot-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -893,6 +893,101 @@ nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; }; + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + + status = "okay"; + }; + + padctl@7009f000 { + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_run_cam>; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb3_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + }; + }; + /* WIFI/BT module */ mmc@700b0000 { status = "disabled"; @@ -915,33 +1010,6 @@ non-removable; }; - usb@7d000000 { - status = "okay"; - }; - - usb-phy@7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@7d004000 { - status = "okay"; - }; - - usb-phy@7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@7d008000 { - status = "okay"; - }; - - usb-phy@7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - }; - backlight: backlight { compatible = "pwm-backlight"; @@ -1132,5 +1200,21 @@ gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_3v3_lp0: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 8558ad38b69c..0cc6b4e9f954 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -50,9 +50,6 @@ reset-names = "pex", "afi", "pcie_x"; status = "disabled"; - phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; - phy-names = "pcie"; - pci@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; @@ -630,8 +627,6 @@ <&tegra_car 123>, <&tegra_car 129>; reset-names = "sata", "sata-oob", "sata-cold"; - phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; - phy-names = "sata-phy"; status = "disabled"; }; @@ -651,6 +646,41 @@ status = "disabled"; }; + usb@70090000 { + compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"; + reg = <0x0 0x70090000 0x0 0x8000>, + <0x0 0x70098000 0x0 0x1000>, + <0x0 0x70099000 0x0 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = , + ; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_ss_div2", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + status = "disabled"; + }; + padctl: padctl@7009f000 { compatible = "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"; @@ -658,34 +688,124 @@ resets = <&tegra_car 142>; reset-names = "padctl"; - #phy-cells = <1>; + pads { + usb2 { + status = "disabled"; - phys { - pcie-0 { + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { status = "disabled"; + + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - sata-0 { + hsic { status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - usb3-0 { + pcie { status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - usb3-1 { + sata { + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { status = "disabled"; }; - utmi-0 { + usb2-2 { status = "disabled"; }; - utmi-1 { + hsic-0 { status = "disabled"; }; - utmi-2 { + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { status = "disabled"; }; }; -- cgit v1.2.3 From 1765f53dda74a64703a0796bd7685d32111ed126 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 08:52:49 +0200 Subject: arm64: tegra: Remove undocumented battery-name property battery-name is not a documented property, so drop it to avoid validation failures. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 1 - arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 1 - 2 files changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 761ad05d9acb..e27e23cedf7b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -781,7 +781,6 @@ battery: smart-battery { compatible = "sbs,sbs-battery"; reg = <0xb>; - battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <10>; /* power-supplies = <&charger>; */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 745f5a4fa161..eee5e73cc651 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1330,7 +1330,6 @@ battery: bq27742@55 { compatible = "ti,bq27742"; reg = <0x55>; - battery-name = "battery"; }; }; }; -- cgit v1.2.3 From 393a403ed87ee43d23fe1b075ff52826c6e74a53 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 08:57:05 +0200 Subject: arm64: tegra: Remove simple clocks bus The standard way to do this is to list out the clocks at the top-level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 15 ++++----------- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 15 ++++----------- arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi | 15 ++++----------- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 15 ++++----------- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 15 ++++----------- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 15 ++++----------- 6 files changed, 24 insertions(+), 66 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index e27e23cedf7b..fd531c401f69 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1022,17 +1022,10 @@ backlight-boot-off; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 251c6099482a..8a4ba371ff92 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -300,17 +300,10 @@ vqmmc-supply = <&vdd_1v8>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi index f9158dc943f9..58aa0518965e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi @@ -40,17 +40,10 @@ non-removable; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 579d5b8a757d..9f81cabdcbb6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1586,17 +1586,10 @@ status = "okay"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index aca01408c81f..9f163ddf47f8 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -574,17 +574,10 @@ wakeup-source; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index eee5e73cc651..cde93cf25feb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1726,17 +1726,10 @@ }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { -- cgit v1.2.3 From 7517248ad27f957d64c40ebe0ff9b284198be0a4 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:02:05 +0200 Subject: arm64: tegra: Remove simple regulators bus The standard way to do this is to list out the regulators at the top- level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 263 +++++++-------- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 81 ++--- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 60 ++-- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 96 +++--- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 23 +- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 274 ++++++++-------- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 361 ++++++++++----------- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 177 +++++----- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 137 ++++---- 9 files changed, 671 insertions(+), 801 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index fd531c401f69..607d28a6772e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1055,158 +1055,139 @@ ddc-i2c-bus = <&dpaux>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <19000000>; - regulator-max-microvolt = <19000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <19000000>; + regulator-max-microvolt = <19000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; - vdd_usb1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb1_vbus: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_3v3_panel: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_panel: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_hdmi_pll: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_hdmi_pll: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_5v0_hdmi: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_hdmi: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_5v0_ts: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+5V_VDD_TS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_5v0_ts: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+5V_VDD_TS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_3v3_lp0: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "+3.3V_LP0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - /* - * TODO: find a way to wire this up with the USB EHCI - * controllers so that it can be enabled on demand. - */ - regulator-always-on; - gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_lp0: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 37ec15a14c77..43b8d643e7a1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -333,62 +333,51 @@ }; }; - regulators { - vdd_sd: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; + vdd_sd: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "SD_CARD_SW_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - regulator-name = "SD_CARD_SW_PWR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; - gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) - GPIO_ACTIVE_HIGH>; - enable-active-high; - - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_hdmi: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3_sys>; + }; - gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_hdmi: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_5v0_sys>; - }; + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; - vdd_usb0: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - - regulator-name = "VDD_USB0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_usb0: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_USB0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_5v0_sys>; - }; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; - vdd_usb1: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; + vin-supply = <&vdd_5v0_sys>; + }; - regulator-name = "VDD_USB1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_usb1: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vin-supply = <&vdd_5v0_sys>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index d1ed7eee949a..b5568b9ff181 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -392,45 +392,33 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - gnd: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - - regulator-name = "GND"; - regulator-min-microvolt = <0>; - regulator-max-microvolt = <0>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; + gnd: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "GND"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + regulator-always-on; + regulator-boot-on; + }; - vdd_1v8_ap: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - regulator-name = "VDD_1V8_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vdd_1v8_ap: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_1v8>; - }; + vin-supply = <&vdd_1v8>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 442e333ac13f..6f2c0754c870 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -293,65 +293,49 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - - regulator-name = "VIN_SYS_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_hdmi: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - - regulator-name = "VDD_5V0_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vdd_3v3_pcie: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - - regulator-name = "PEX_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_12v_pcie: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; + vdd_hdmi: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - regulator-name = "VDD_12V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - }; + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; - vdd_5v_sata: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; - regulator-name = "VDD_5V_SATA"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_5v_sata: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 8a4ba371ff92..d818fac3070c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -335,18 +335,15 @@ method = "smc"; }; - regulators { - vdd_gpu: regulator@100 { - compatible = "pwm-regulator"; - reg = <100>; - pwms = <&pwm 1 4880>; - regulator-name = "VDD_GPU"; - regulator-min-microvolt = <710000>; - regulator-max-microvolt = <1320000>; - enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; - regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <2000>; - regulator-settling-time-us = <160>; - }; + vdd_gpu: regulator@100 { + compatible = "pwm-regulator"; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 1e74f50d17ee..98f8f97a19b2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1523,152 +1523,6 @@ hvdd-usb-supply = <&vdd_1v8>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_sys_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VDD_SYS_MUX"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_sys_mux>; - }; - - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_sys_mux>; - - regulator-enable-ramp-delay = <160>; - regulator-disable-ramp-delay = <10000>; - }; - - vdd_5v0_io: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "VDD_5V0_IO_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_sd: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "VDD_3V3_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - - regulator-enable-ramp-delay = <472>; - regulator-disable-ramp-delay = <4880>; - }; - - vdd_dsi_csi: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "AVDD_DSI_CSI_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&vdd_sys_1v2>; - }; - - vdd_3v3_dis: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "VDD_DIS_3V3_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_1v8_dis: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "VDD_LCD_1V8_DIS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_1v8>; - }; - - vdd_5v0_rtl: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "RTL_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb_vbus: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "USB_VBUS_EN1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb_vbus_otg: regulator@11 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "USB_VBUS_EN0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_hdmi: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - }; - gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -1692,4 +1546,132 @@ linux,code = ; }; }; + + vdd_sys_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_SYS_MUX"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + + regulator-enable-ramp-delay = <160>; + regulator-disable-ramp-delay = <10000>; + }; + + vdd_5v0_io: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_IO_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sd: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + + regulator-enable-ramp-delay = <472>; + regulator-disable-ramp-delay = <4880>; + }; + + vdd_dsi_csi: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdd_sys_1v2>; + }; + + vdd_3v3_dis: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "VDD_DIS_3V3_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_1v8_dis: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "VDD_LCD_1V8_DIS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + }; + + vdd_5v0_rtl: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "RTL_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb_vbus: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS_EN1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb_vbus_otg: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS_EN0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_hdmi: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 9f81cabdcbb6..16a5960e7f63 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1635,223 +1635,198 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - device_type = "fixed-regulators"; - #address-cells = <1>; - #size-cells = <0>; - - battery_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd-ac-bat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + battery_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-ac-bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd-3v3"; - regulator-enable-ramp-delay = <160>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - - gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3"; + regulator-enable-ramp-delay = <160>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; - max77620_gpio7: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "max77620-gpio7"; - regulator-enable-ramp-delay = <240>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&max77620_ldo0>; - regulator-always-on; - regulator-boot-on; - - gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - lcd_bl_en: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "lcd-bl-en"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + max77620_gpio7: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "max77620-gpio7"; + regulator-enable-ramp-delay = <240>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&max77620_ldo0>; + regulator-always-on; + regulator-boot-on; + + gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + lcd_bl_en: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-bl-en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; - en_vdd_sd: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "en-vdd-sd"; - regulator-enable-ramp-delay = <472>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3>; - - gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - en_vdd_cam: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "en-vdd-cam"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + en_vdd_sd: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "en-vdd-sd"; + regulator-enable-ramp-delay = <472>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; - gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_sys_boost: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "vdd-sys-boost"; - regulator-enable-ramp-delay = <3090>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - - gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + en_vdd_cam: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "en-vdd-cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; - vdd_hdmi: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "vdd-hdmi"; - regulator-enable-ramp-delay = <468>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_sys_boost>; - regulator-boot-on; - - gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - en_vdd_cpu_fixed: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "vdd-cpu-fixed"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; + vdd_sys_boost: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys-boost"; + regulator-enable-ramp-delay = <3090>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; - vdd_aux_3v3: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "aux-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_snsr_pm: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "snsr_pm"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vdd_hdmi: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "vdd-hdmi"; + regulator-enable-ramp-delay = <468>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_sys_boost>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - enable-active-high; - }; + en_vdd_cpu_fixed: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu-fixed"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; - vdd_usb_5v0: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - status = "disabled"; - regulator-name = "vdd-usb-5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_3v3>; + vdd_aux_3v3: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "aux-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - enable-active-high; - }; + vdd_snsr_pm: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "snsr_pm"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - vdd_cdc_1v2_aud: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - status = "disabled"; - regulator-name = "vdd_cdc_1v2_aud"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - startup-delay-us = <250000>; + enable-active-high; + }; - enable-active-high; - }; + vdd_usb_5v0: regulator@11 { + compatible = "regulator-fixed"; + status = "disabled"; + regulator-name = "vdd-usb-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3>; - vdd_disp_3v0: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "vdd-disp-3v0"; - regulator-enable-ramp-delay = <232>; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - - gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + enable-active-high; + }; - vdd_fan: regulator@13 { - compatible = "regulator-fixed"; - reg = <13>; - regulator-name = "vdd-fan"; - regulator-enable-ramp-delay = <284>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_cdc_1v2_aud: regulator@101 { + compatible = "regulator-fixed"; + status = "disabled"; + regulator-name = "vdd_cdc_1v2_aud"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + startup-delay-us = <250000>; - gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + enable-active-high; + }; - usb_vbus1: regulator@14 { - compatible = "regulator-fixed"; - reg = <14>; - regulator-name = "usb-vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_disp_3v0: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vdd-disp-3v0"; + regulator-enable-ramp-delay = <232>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; - gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - usb_vbus2: regulator@15 { - compatible = "regulator-fixed"; - reg = <15>; - regulator-name = "usb-vbus2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_fan: regulator@13 { + compatible = "regulator-fixed"; + regulator-name = "vdd-fan"; + regulator-enable-ramp-delay = <284>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_3v3_eth: regulator@16 { - compatible = "regulator-fixed"; - reg = <16>; - regulator-name = "vdd-3v3-eth-a02"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + usb_vbus1: regulator@14 { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + usb_vbus2: regulator@15 { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + vdd_3v3_eth: regulator@16 { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3-eth-a02"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9f163ddf47f8..4916bed7e410 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -691,120 +691,109 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_3v3_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <240>; - regulator-disable-ramp-delay = <11340>; - regulator-always-on; - regulator-boot-on; - - gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - - vin-supply = <&vdd_5v0_sys>; - }; + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; - vdd_3v3_sd: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + regulator-disable-ramp-delay = <11340>; + regulator-always-on; + regulator-boot-on; - regulator-name = "VDD_3V3_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; - gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_sd: regulator@2 { + compatible = "regulator-fixed"; - vdd_hdmi: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_hub_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; + vdd_hdmi: regulator@3 { + compatible = "regulator-fixed"; - regulator-name = "VDD_HUB_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_hub_3v3: regulator@4 { + compatible = "regulator-fixed"; + + regulator-name = "VDD_HUB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - vdd_cpu: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-name = "VDD_CPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_cpu: regulator@5 { + compatible = "regulator-fixed"; - vin-supply = <&vdd_5v0_sys>; - }; + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; - vdd_gpu: regulator@6 { - compatible = "pwm-regulator"; - reg = <6>; - pwms = <&pwm 1 4880>; - regulator-name = "VDD_GPU"; - regulator-min-microvolt = <710000>; - regulator-max-microvolt = <1320000>; - regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <2000>; - regulator-settling-time-us = <160>; - enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vdd_5v0_sys>; - }; + gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + enable-active-high; - avdd_io_edp_1v05: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; + vin-supply = <&vdd_5v0_sys>; + }; - regulator-name = "AVDD_IO_EDP_1V05"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; + vdd_gpu: regulator@6 { + compatible = "pwm-regulator"; + pwms = <&pwm 1 4880>; - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; - vin-supply = <&avdd_1v05_pll>; - }; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_sys>; + }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index cde93cf25feb..e8dfba328ce5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1807,88 +1807,73 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - device_type = "fixed-regulators"; - #address-cells = <1>; - #size-cells = <0>; - - ppvar_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "PPVAR_SYS"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - regulator-always-on; - }; + ppvar_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "PPVAR_SYS"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + regulator-always-on; + }; - pplcd_vdd: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "PPLCD_VDD"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - gpio = <&gpio TEGRA_GPIO(V, 4) 0>; - enable-active-high; - regulator-boot-on; - }; + pplcd_vdd: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PPLCD_VDD"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + gpio = <&gpio TEGRA_GPIO(V, 4) 0>; + enable-active-high; + regulator-boot-on; + }; - pp3000_always: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "PP3000_ALWAYS"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; + pp3000_always: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PP3000_ALWAYS"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; - pp3300: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PP3300"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - }; + pp3300: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "PP3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + }; - pp5000: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "PP5000"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + pp5000: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "PP5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - pp1800_lcdio: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "PP1800_LCDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(V, 3) 0>; - enable-active-high; - regulator-boot-on; - }; + pp1800_lcdio: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_LCDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(V, 3) 0>; + enable-active-high; + regulator-boot-on; + }; - pp1800_cam: regulator@6 { - compatible = "regulator-fixed"; - reg= <6>; - regulator-name = "PP1800_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(K, 3) 0>; - enable-active-high; - }; + pp1800_cam: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) 0>; + enable-active-high; + }; - usbc_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "USBC_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + usbc_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "USBC_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; -- cgit v1.2.3 From 7eb0454440e1522d347b2bc0db8eab742115098a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:02:36 +0200 Subject: arm64: tegra: norrin: Add missing panel power supply This panel supply is always on, so this does happen to work by accident. Make sure to properly hook up the power supply to model the dependency correctly and so that the panel continues to operate properly even if the supply is not always on. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index 607d28a6772e..fb27812eace1 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -1051,6 +1051,7 @@ panel: panel { compatible = "innolux,n116bge"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; -- cgit v1.2.3 From 3c881456b64519e661b14a23664f272a0171b0cb Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:59:48 -0700 Subject: ARM: OMAP2+: Drop legacy platform data for am4 dwc3 We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. [tony@atomide.com: fixed typo for am3 vs am4] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-l4.dtsi | 2 - arch/arm/mach-omap2/omap_hwmod_43xx_data.c | 59 ------------------------------ 2 files changed, 61 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index 0d0f9fe4a882..82893339bff4 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -2352,7 +2352,6 @@ target-module@80000 { /* 0x48380000, ap 123 42.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss0"; reg = <0x80000 0x4>, <0x80010 0x4>; reg-names = "rev", "sysc"; @@ -2433,7 +2432,6 @@ target-module@c0000 { /* 0x483c0000, ap 127 7a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss1"; reg = <0xc0000 0x4>, <0xc0010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 3f338732ee6c..b88d12de68a2 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -85,49 +85,6 @@ static struct omap_hwmod am43xx_control_hwmod = { }, }; -static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | - MSTANDBY_NO | MSTANDBY_SMART | - MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = { - .name = "usb_otg_ss", - .sysc = &am43xx_usb_otg_ss_sysc, -}; - -static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = { - .name = "usb_otg_ss0", - .class = &am43xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "l3s_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { - .name = "usb_otg_ss1", - .class = &am43xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3s_clkdm", - .main_clk = "l3s_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { .master = &am33xx_l3_main_hwmod, @@ -178,20 +135,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = { - .master = &am33xx_l3_s_hwmod, - .slave = &am43xx_usb_otg_ss0_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = { - .master = &am33xx_l3_s_hwmod, - .slave = &am43xx_usb_otg_ss1_hwmod, - .clk = "l3s_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_mpu__l3_main, &am33xx_mpu__prcm, @@ -211,8 +154,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__smartreflex1, &am33xx_l3_s__gpmc, &am33xx_l3_main__ocmc, - &am43xx_l3_s__usbotgss0, - &am43xx_l3_s__usbotgss1, NULL, }; -- cgit v1.2.3 From abe4e4675dfc62b7f2328e2c4bce8b5bdcdff7c0 Mon Sep 17 00:00:00 2001 From: Drew Fustini Date: Sun, 12 Jul 2020 12:37:19 +0200 Subject: ARM: dts: am335x-pocketbeagle: set default mux for gpio pins These pins on the PocketBeagle P1 and P2 headers are connected to AM3358 balls with gpio lines, and these pins are not used for any other peripherals by default. These GPIO lines are unclaimed and could be used by userspace program through the gpiod ABI. This patch adds a "default" state in the am33xx_pinmux node and sets the mux for those pins to gpio (mode 7) and input enable. The "pinctrl-single,bias-pullup" and "pinctrl-single,bias-pulldown" pinconf properties are also set for each pin per the ball reset state in section 4.2 of the datasheet [0]. This is the AM335x pin control register format in Table 9-60 [1]: bit attribute value ---------------------------------- 31-7 reserved 0 on reset 6 slew { 0: fast, 1: slow } 5 rx_active { 0: rx disable, 1: rx enabled } 4 pu_typesel { 0: pulldown select, 1: pullup select } 3 puden { 0: pud enable, 1: disabled } 2 mode 3 bits to selec mode 0 to 7 1 mode 0 mode The values for the bias pinconf properties are derived as follows: pinctrl-single,bias-pullup = <[input] [enabled] [disable] [mask]>; pinctrl-single,bias-pullup = < 0x10 0x10 0x10 0x18 >; 2^5 2^4 2^3 2^2 2^1 2^0 | 0x20 0x10 0x08 0x04 0x02 0x01 | --------------------------------------------------| input x 1 0 x x x | 0x10 enabled x 1 0 x x x | 0x10 disabled x 0 0 x x x | 0x00 mask x 1 1 x x x | 0x18 pinctrl-single,bias-pulldown = <[input] [enabled] [disable] [mask]>; pinctrl-single,bias-pulldown = < 0x0 0x0 0x10 0x18 >; 2^5 2^4 2^3 2^2 2^1 2^0 | 0x20 0x10 0x08 0x04 0x02 0x01 | --------------------------------------------------| input x 0 0 x x x | 0x00 enabled x 0 0 x x x | 0x00 disabled x 1 0 x x x | 0x10 mask x 1 1 x x x | 0x18 [0] http://www.ti.com/lit/ds/symlink/am3358.pdf [1] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf Signed-off-by: Drew Fustini Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-pocketbeagle.dts | 125 ++++++++++++++++++++++++++++++ 1 file changed, 125 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index e08b5f73ccb5..e083ea36184d 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -204,6 +204,131 @@ }; &am33xx_pinmux { + + pinctrl-names = "default"; + + pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio + &P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio + &P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio + &P2_17_gpio >; + + /* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */ + P2_03_gpio: pinmux_P2_03_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */ + P1_34_gpio: pinmux_P1_34_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */ + P2_19_gpio: pinmux_P2_19_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */ + P2_24_gpio: pinmux_P2_24_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */ + P2_33_gpio: pinmux_P2_33_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */ + P2_22_gpio: pinmux_P2_22_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */ + P2_18_gpio: pinmux_P2_18_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */ + P2_10_gpio: pinmux_P2_10_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */ + P2_06_gpio: pinmux_P2_06_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */ + P2_04_gpio: pinmux_P2_04_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */ + P2_02_gpio: pinmux_P2_02_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + + /* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */ + P2_08_gpio: pinmux_P2_08_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x00 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x00 0x00 0x10 0x18>; + }; + + /* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */ + P2_17_gpio: pinmux_P2_17_gpio { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7) + >; + pinctrl-single,bias-pullup = < 0x10 0x10 0x00 0x18>; + pinctrl-single,bias-pulldown = < 0x10 0x00 0x10 0x18>; + }; + i2c2_pins: pinmux-i2c2-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */ -- cgit v1.2.3 From 214ec0319e53075c6e36dca67e86a0d9699d1d9e Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:42 -0500 Subject: ARM: dts: omap4: Add timer_sys_ck clocks for timers The commit 1c7de9f27a65 ("clk: ti: omap4: cleanup unnecessary clock aliases") has cleaned up all timer_sys_ck clock aliases and retained only the timer_32k_ck clock alias. The OMAP clocksource timer driver though still uses this clock alias when reconfiguring the parent clock source for the timer functional clocks, so add these clocks to all the timer nodes. This is required by the OMAP remoteproc driver to successfully acquire a timer and configure the source clock to be driven from timer_sys_ck clock. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-l4-abe.dtsi | 20 ++++++++++++-------- arch/arm/boot/dts/omap4-l4.dtsi | 35 +++++++++++++++++++++-------------- 2 files changed, 33 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi index a6feb201c569..b2cf5f41e222 100644 --- a/arch/arm/boot/dts/omap4-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi @@ -333,8 +333,9 @@ compatible = "ti,omap4430-timer"; reg = <0x00000000 0x80>, <0x49038000 0x80>; - clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>, + <&syc_clk_div_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; }; @@ -363,8 +364,9 @@ compatible = "ti,omap4430-timer"; reg = <0x00000000 0x80>, <0x4903a000 0x80>; - clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>, + <&syc_clk_div_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; }; @@ -393,8 +395,9 @@ compatible = "ti,omap4430-timer"; reg = <0x00000000 0x80>, <0x4903c000 0x80>; - clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>, + <&syc_clk_div_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; }; @@ -423,8 +426,9 @@ compatible = "ti,omap4430-timer"; reg = <0x00000000 0x80>, <0x4903e000 0x80>; - clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>, + <&syc_clk_div_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; ti,timer-dsp; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index fcc52121ff09..bf90a683d7b8 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1163,8 +1163,9 @@ timer1: timer@0 { compatible = "ti,omap3430-timer"; reg = <0x0 0x80>; - clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-alwon; }; @@ -1439,8 +1440,9 @@ timer2: timer@0 { compatible = "ti,omap3430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1466,8 +1468,9 @@ timer3: timer@0 { compatible = "ti,omap4430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1493,8 +1496,9 @@ timer4: timer@0 { compatible = "ti,omap4430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1520,8 +1524,9 @@ timer9: timer@0 { compatible = "ti,omap4430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -1954,8 +1959,9 @@ timer10: timer@0 { compatible = "ti,omap3430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -1982,8 +1988,9 @@ timer11: timer@0 { compatible = "ti,omap4430-timer"; reg = <0x0 0x80>; - clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>, + <&sys_clkin_ck>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; -- cgit v1.2.3 From 52ddb6d914d6c6292463bd329c1f501b4c2dfdce Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:43 -0500 Subject: ARM: dts: omap5: Add timer_sys_ck clocks for timers The commit d41e53040926 ("clk: ti: omap5: cleanup unnecessary clock aliases") has cleaned up all timer_sys_ck clock aliases and retained only the timer_32k_ck clock alias. The OMAP clocksource timer driver though still uses this clock alias when reconfiguring the parent clock source for the timer functional clocks, so add these clocks to all the timer nodes except for the always-on timers 1 and 12. This is required by the OMAP remoteproc driver to successfully acquire a timer and configure the source clock to be driven from timer_sys_ck clock. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4-abe.dtsi | 20 ++++++++++++-------- arch/arm/boot/dts/omap5-l4.dtsi | 35 +++++++++++++++++++++-------------- 2 files changed, 33 insertions(+), 22 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index bafd6adf9f45..25b7fce8de2d 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -298,8 +298,9 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x80>, <0x49038000 0x80>; - clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>, + <&dss_syc_gfclk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; ti,timer-pwm; @@ -329,8 +330,9 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x80>, <0x4903a000 0x80>; - clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>, + <&dss_syc_gfclk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; ti,timer-pwm; @@ -360,8 +362,9 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x80>, <0x4903c000 0x80>; - clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>, + <&dss_syc_gfclk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; }; @@ -390,8 +393,9 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x80>, <0x4903e000 0x80>; - clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>, + <&dss_syc_gfclk_div>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-dsp; ti,timer-pwm; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 5217805bf126..683394d1e4d6 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1082,8 +1082,9 @@ timer2: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1109,8 +1110,9 @@ timer3: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1136,8 +1138,9 @@ timer4: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; }; }; @@ -1163,8 +1166,9 @@ timer9: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -1730,8 +1734,9 @@ timer10: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -1758,8 +1763,9 @@ timer11: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-pwm; }; @@ -2387,8 +2393,9 @@ timer1: timer@0 { compatible = "ti,omap5430-timer"; reg = <0x0 0x80>; - clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>; - clock-names = "fck"; + clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>, + <&sys_clkin>; + clock-names = "fck", "timer_sys_ck"; interrupts = ; ti,timer-alwon; }; -- cgit v1.2.3 From 9ae60ac13fc847d7175587290a1a9aa2aac091b0 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:44 -0500 Subject: ARM: dts: omap4: Update the DSP node The compatible property for the DSP node is updated to match the OMAP remoteproc bindings. The node is moved from the soc node to the ocp node to better reflect the connectivity from MPU side. The node is updated with the 'ti,bootreg', 'clocks', 'resets', 'iommus', 'mboxes' and 'firmware' properties. Note that the node does not have any 'reg' or 'reg-names' properties since it doesn't have any L2 RAM memory, but only Unicaches. The node is disabled for now, and should be enabled as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 592feadf16ac..e1b6f19ed6f4 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -106,10 +106,6 @@ sram = <&ocmcram>; }; - dsp { - compatible = "ti,omap3-c64"; - }; - iva { compatible = "ti,ivahd"; ti,hwmods = "iva"; @@ -277,6 +273,17 @@ hw-caps-temp-alert; }; + dsp: dsp { + compatible = "ti,omap4-dsp"; + ti,bootreg = <&scm_conf 0x304 0>; + iommus = <&mmu_dsp>; + resets = <&prm_tesla 0>; + clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>; + firmware-name = "omap4-dsp-fw.xe64T"; + mboxes = <&mailbox &mbox_dsp>; + status = "disabled"; + }; + aes1_target: target-module@4b501000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x4b501080 0x4>, -- cgit v1.2.3 From 5ce170cdaa64e31ddf87fbc4ebf06c64935a7b42 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:45 -0500 Subject: ARM: dts: omap4: Add IPU DT node The DT node for the Dual-Cortex M3 IPU processor sub-system has been added for OMAP4 SoCs. The L2RAM memory region information has been added to the node through the 'reg' and 'reg-names' properties. The node has the 'iommus', 'clocks', 'resets', 'mboxes' and 'firmware' properties also added, and is disabled for now. It should be enabled as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index e1b6f19ed6f4..c100ccc95ca5 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -284,6 +284,18 @@ status = "disabled"; }; + ipu: ipu@55020000 { + compatible = "ti,omap4-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu>; + resets = <&prm_core 0>, <&prm_core 1>; + clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>; + firmware-name = "omap4-ipu-fw.xem3"; + mboxes = <&mailbox &mbox_ipu>; + status = "disabled"; + }; + aes1_target: target-module@4b501000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x4b501080 0x4>, -- cgit v1.2.3 From 691eb1805fcfc1a2ede06aec6a4d85d312961146 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:46 -0500 Subject: ARM: dts: omap4: Add aliases for rproc nodes Add aliases for the DSP and IPU remoteproc processor nodes common to all OMAP4 boards. The aliases uses the stem "rproc". The aliases can be overridden, if needed, in the respective board files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index c100ccc95ca5..3fff900a42e8 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -26,6 +26,8 @@ serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; + rproc0 = &dsp; + rproc1 = &ipu; }; cpus { -- cgit v1.2.3 From b4778e787fe9e82dcbff8150ebfbe6fea0b6c4e1 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:47 -0500 Subject: ARM: dts: omap4-panda-common: Add CMA pools and enable IPU & DSP The CMA reserved memory nodes have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. These nodes are assigned to the respective rproc device nodes, and both the IPU and DSP remote processors are enabled for all these boards. The current CMA pools and sizes are defined statically for each device. The starting addresses are fixed to meet current dependencies on the remote processor firmwares, and will go away when the remote-side code has been improved to gather this information runtime during its initialization. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 55ea8b6189af..ef79028fc95f 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -12,6 +12,26 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dsp_memory_region: dsp-memory@98000000 { + compatible = "shared-dma-pool"; + reg = <0x98000000 0x800000>; + reusable; + status = "okay"; + }; + + ipu_memory_region: ipu-memory@98800000 { + compatible = "shared-dma-pool"; + reg = <0x98800000 0x7000000>; + reusable; + status = "okay"; + }; + }; + chosen { stdout-path = &uart3; }; @@ -571,3 +591,13 @@ }; }; }; + +&dsp { + status = "okay"; + memory-region = <&dsp_memory_region>; +}; + +&ipu { + status = "okay"; + memory-region = <&ipu_memory_region>; +}; -- cgit v1.2.3 From 7f7d771c00bf65d18a3e30e983b4061a418efbf4 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:48 -0500 Subject: ARM: dts: omap4-panda-common:: Add system timers to DSP and IPU The BIOS System Tick timers have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. The following DMTimers are chosen: IPU : GPT3 (SMP-mode) DSP : GPT5 IPU has two Cortex-M3 processors, and is currently expected to be running in SMP-mode, so only a single timer suffices to provide the BIOS tick timer. An additional timer should be added for the second processor in IPU if it were to be run in non-SMP mode. The timer value also needs to be unique from the ones used by other processors so that they can be run simultaneously. The timers are optional, but are mandatory to support device management features such as power management and watchdog support. The above are added to successfully boot and execute firmware images configured with the respective timers, images that use internal processor subsystem timers are not affected. The timers can be changed or removed as per the system integration needs, alongside equivalent changes on the firmware side. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index ef79028fc95f..db0b7e9264f9 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -595,9 +595,11 @@ &dsp { status = "okay"; memory-region = <&dsp_memory_region>; + ti,timers = <&timer5>; }; &ipu { status = "okay"; memory-region = <&ipu_memory_region>; + ti,timers = <&timer3>; }; -- cgit v1.2.3 From 3026ce47498dfdc92966d8d66f10afabf7190c46 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:49 -0500 Subject: ARM: dts: omap5: Add DSP and IPU nodes OMAP5, like OMAP4, also has two remote processor subsystems, DSP and IPU. The IPU subsystem though has dual Cortex-M4 processors instead of the dual Cortex-M3 processors in OMAP4, but otherwise has almost the same set of features. Add the DT nodes for these two processor sub-systems for all OMAP5 SoCs. The nodes have the 'iommus', 'clocks', 'resets', 'firmware' and 'mboxes' properties added, and are disabled for now. The IPU node has its L2 RAM memory specified through the 'reg' and 'reg-names' properties. The DSP node doesn't have these since it doesn't have any L2 RAM memories, but has an additional 'ti,bootreg' property instead as it has a specific boot register that needs to be programmed for booting. These nodes should be enabled as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fb889c5b00c9..116150ded018 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -216,6 +216,29 @@ }; }; + dsp: dsp { + compatible = "ti,omap5-dsp"; + ti,bootreg = <&scm_conf 0x304 0>; + iommus = <&mmu_dsp>; + resets = <&prm_dsp 0>; + clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>; + firmware-name = "omap5-dsp-fw.xe64T"; + mboxes = <&mailbox &mbox_dsp>; + status = "disabled"; + }; + + ipu: ipu@55020000 { + compatible = "ti,omap5-ipu"; + reg = <0x55020000 0x10000>; + reg-names = "l2ram"; + iommus = <&mmu_ipu>; + resets = <&prm_core 0>, <&prm_core 1>; + clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>; + firmware-name = "omap5-ipu-fw.xem4"; + mboxes = <&mailbox &mbox_ipu>; + status = "disabled"; + }; + dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; -- cgit v1.2.3 From e8661220e128ac649303ca0a5e31bf5f8533ab6e Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:50 -0500 Subject: ARM: dts: omap5: Add aliases for rproc nodes Add aliases for the DSP and IPU remoteproc processor nodes common to all OMAP5 boards. The aliases uses the stem "rproc", and are identical to the values chosen on OMAP4 boards. The aliases can be overridden, if needed, in the respective board files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 116150ded018..adffc48a6d55 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -31,6 +31,8 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + rproc0 = &dsp; + rproc1 = &ipu; }; cpus { -- cgit v1.2.3 From 1e48754f2c6ed745299ed179ae90f695abe7ca87 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:51 -0500 Subject: ARM: dts: omap5-uevm: Add CMA pools and enable IPU & DSP The CMA reserved memory nodes have been added for the IPU and DSP remoteproc devices on the OMAP5 uEVM board. These nodes are assigned to the respective rproc device nodes, and both the IPU and DSP remote processors are enabled for this board. The current CMA pools and sizes are defined statically for each device. The starting addresses are fixed to meet current dependencies on the remote processor firmwares, and will go away when the remote-side code has been improved to gather this information runtime during its initialization. An associated pair of the rproc node and its CMA node can be disabled later on if there is no use-case defined to use that remote processor. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 9441e9a572ad..251885656697 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -15,6 +15,26 @@ reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_memory_region: dsp-memory@95000000 { + compatible = "shared-dma-pool"; + reg = <0 0x95000000 0 0x800000>; + reusable; + status = "okay"; + }; + + ipu_memory_region: ipu-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0 0x95800000 0 0x3800000>; + reusable; + status = "okay"; + }; + }; + aliases { ethernet = ðernet; }; @@ -198,3 +218,13 @@ &wlcore { compatible = "ti,wl1837"; }; + +&dsp { + status = "okay"; + memory-region = <&dsp_memory_region>; +}; + +&ipu { + status = "okay"; + memory-region = <&ipu_memory_region>; +}; -- cgit v1.2.3 From f0954943a3dffbbf2b98573984f146a18d1219cb Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:52 -0500 Subject: ARM: dts: omap5-uevm: Add system timers to DSP and IPU The BIOS System Tick timers have been added for the IPU and DSP remoteproc devices for the OMAP5 uEVM boards. The following timers (same as the timers on OMAP4 Panda boards) are chosen: IPU : GPT3 (SMP-mode) DSP : GPT5 IPU has two Cortex-M4 processors, and is currently expected to be running in SMP-mode, so only a single timer suffices to provide the BIOS tick timer. An additional timer should be added for the second processor in IPU if it were to be run in non-SMP mode. The timer value also needs to be unique from the ones used by other processors so that they can be run simultaneously. The timers are optional, but are mandatory to support device management features such as power management and watchdog support. The above are added to successfully boot and execute firmware images configured with the respective timers, images that use internal processor subsystem timers are not affected. The timers can be changed or removed as per the system integration needs, alongside equivalent changes on the firmware side. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 251885656697..bb016419ef61 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -222,9 +222,11 @@ &dsp { status = "okay"; memory-region = <&dsp_memory_region>; + ti,timers = <&timer5>; }; &ipu { status = "okay"; memory-region = <&ipu_memory_region>; + ti,timers = <&timer3>; }; -- cgit v1.2.3 From f1c4a33fb83eedfa9cdd32867c4d445fa8e74555 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:53 -0500 Subject: ARM: dts: omap4-panda-common: Add watchdog timers for IPU and DSP The watchdog timers have been added for the IPU and DSP remoteproc devices on all the OMAP4-based Panda boards. The following timers are used as the watchdog timers, DSP : GPT6 IPU : GPT9 & GPT11 (one for each Cortex-M3 core) The MPU-side drivers will use this data to initialize the watchdog timers, and listen for any watchdog triggers. The BIOS-side code needs to configure and refresh these timers properly to not throw a watchdog error. These timers can be changed or removed as per the system integration needs, alongside appropriate equivalent changes on the firmware side. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index db0b7e9264f9..a6a0c7b832dd 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -596,10 +596,12 @@ status = "okay"; memory-region = <&dsp_memory_region>; ti,timers = <&timer5>; + ti,watchdog-timers = <&timer6>; }; &ipu { status = "okay"; memory-region = <&ipu_memory_region>; ti,timers = <&timer3>; + ti,watchdog-timers = <&timer9>, <&timer11>; }; -- cgit v1.2.3 From e94828c17c99319ea59837d4a3eb18fe7045e0b4 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Thu, 9 Jul 2020 18:19:54 -0500 Subject: ARM: dts: omap5-uevm: Add watchdog timers for IPU and DSP The watchdog timers have been added for the IPU and DSP remoteproc devices for the OMAP5 uEVM board. The following timers (same as the timers on OMAP4 Panda boards) are used as the watchdog timers, DSP : GPT6 IPU : GPT9 & GPT11 (one for each Cortex-M4 core) The MPU-side drivers will use this data to initialize the watchdog timers, and listen for any watchdog triggers. The BIOS-side code needs to configure and refresh these timers properly to not throw a watchdog error. These timers can be changed or removed as per the system integration needs, alongside appropriate equivalent changes on the firmware side. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index bb016419ef61..9b9e9ee51b5c 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -223,10 +223,12 @@ status = "okay"; memory-region = <&dsp_memory_region>; ti,timers = <&timer5>; + ti,watchdog-timers = <&timer6>; }; &ipu { status = "okay"; memory-region = <&ipu_memory_region>; ti,timers = <&timer3>; + ti,watchdog-timers = <&timer9>, <&timer11>; }; -- cgit v1.2.3 From 75f66813e081d2bd718d931ee50334c12a9e4492 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Wed, 8 Jul 2020 11:34:51 +0200 Subject: Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORT Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-baltos-ir2110.dts | 2 +- arch/arm/boot/dts/am335x-baltos-ir3220.dts | 2 +- arch/arm/boot/dts/am335x-baltos-ir5221.dts | 2 +- arch/arm/boot/dts/am335x-baltos-leds.dtsi | 2 +- arch/arm/boot/dts/am335x-baltos.dtsi | 2 +- arch/arm/boot/dts/am335x-bone-common.dtsi | 2 +- arch/arm/boot/dts/am335x-bone.dts | 2 +- arch/arm/boot/dts/am335x-boneblack-common.dtsi | 2 +- arch/arm/boot/dts/am335x-boneblack-wireless.dts | 2 +- arch/arm/boot/dts/am335x-boneblack.dts | 2 +- arch/arm/boot/dts/am335x-boneblue.dts | 2 +- arch/arm/boot/dts/am335x-bonegreen-common.dtsi | 2 +- arch/arm/boot/dts/am335x-bonegreen-wireless.dts | 2 +- arch/arm/boot/dts/am335x-bonegreen.dts | 2 +- arch/arm/boot/dts/am335x-chiliboard.dts | 2 +- arch/arm/boot/dts/am335x-chilisom.dtsi | 2 +- arch/arm/boot/dts/am335x-evm.dts | 2 +- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- arch/arm/boot/dts/am335x-guardian.dts | 2 +- arch/arm/boot/dts/am335x-icev2.dts | 2 +- arch/arm/boot/dts/am335x-lxm.dts | 2 +- arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 2 +- arch/arm/boot/dts/am335x-netcom-plus-2xx.dts | 2 +- arch/arm/boot/dts/am335x-netcom-plus-8xx.dts | 2 +- arch/arm/boot/dts/am335x-osd3358-sm-red.dts | 4 ++-- arch/arm/boot/dts/am335x-osd335x-common.dtsi | 2 +- arch/arm/boot/dts/am335x-pdu001.dts | 2 +- arch/arm/boot/dts/am335x-pocketbeagle.dts | 2 +- arch/arm/boot/dts/am335x-sancloud-bbe.dts | 2 +- arch/arm/boot/dts/am33xx.dtsi | 2 +- arch/arm/boot/dts/am3517-craneboard.dts | 2 +- arch/arm/boot/dts/am3517-evm-ui.dtsi | 2 +- arch/arm/boot/dts/am3517-evm.dts | 2 +- arch/arm/boot/dts/am3517.dtsi | 2 +- arch/arm/boot/dts/am3874-iceboard.dts | 4 ++-- arch/arm/boot/dts/am4372.dtsi | 2 +- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- arch/arm/boot/dts/am57-pruss.dtsi | 2 +- arch/arm/boot/dts/am5718.dtsi | 2 +- arch/arm/boot/dts/am571x-idk.dts | 2 +- arch/arm/boot/dts/am5728.dtsi | 2 +- arch/arm/boot/dts/am572x-idk-common.dtsi | 2 +- arch/arm/boot/dts/am572x-idk.dts | 2 +- arch/arm/boot/dts/am5748.dtsi | 2 +- arch/arm/boot/dts/am574x-idk.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15-revc.dts | 2 +- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- arch/arm/boot/dts/am57xx-idk-common.dtsi | 2 +- arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 2 +- arch/arm/boot/dts/dra7-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra7-iva-thermal.dtsi | 2 +- arch/arm/boot/dts/dra7.dtsi | 2 +- arch/arm/boot/dts/dra71-evm.dts | 2 +- arch/arm/boot/dts/dra71x.dtsi | 2 +- arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +- arch/arm/boot/dts/dra72-evm-revc.dts | 2 +- arch/arm/boot/dts/dra72-evm-tps65917.dtsi | 4 ++-- arch/arm/boot/dts/dra72-evm.dts | 2 +- arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi | 2 +- arch/arm/boot/dts/dra72x.dtsi | 2 +- arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 2 +- arch/arm/boot/dts/dra74x.dtsi | 2 +- arch/arm/boot/dts/dra76-evm.dts | 2 +- arch/arm/boot/dts/dra76x.dtsi | 2 +- arch/arm/boot/dts/omap2.dtsi | 2 +- arch/arm/boot/dts/omap2420-h4.dts | 2 +- arch/arm/boot/dts/omap2420.dtsi | 2 +- arch/arm/boot/dts/omap2430-sdp.dts | 2 +- arch/arm/boot/dts/omap2430.dtsi | 2 +- arch/arm/boot/dts/omap3-beagle-xm-ab.dts | 2 +- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-cpu-thermal.dtsi | 2 +- arch/arm/boot/dts/omap3-evm-37xx.dts | 2 +- arch/arm/boot/dts/omap3-evm.dts | 2 +- arch/arm/boot/dts/omap3-ha-common.dtsi | 2 +- arch/arm/boot/dts/omap3-ha-lcd.dts | 2 +- arch/arm/boot/dts/omap3-ha.dts | 2 +- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-tao3530.dtsi | 2 +- arch/arm/boot/dts/omap3-thunder.dts | 2 +- arch/arm/boot/dts/omap3-zoom3.dts | 2 +- arch/arm/boot/dts/omap3.dtsi | 2 +- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- arch/arm/boot/dts/omap34xx.dtsi | 2 +- arch/arm/boot/dts/omap36xx.dtsi | 2 +- arch/arm/boot/dts/omap4-cpu-thermal.dtsi | 2 +- arch/arm/boot/dts/omap4-panda-a4.dts | 2 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +- arch/arm/boot/dts/omap4-panda-es.dts | 2 +- arch/arm/boot/dts/omap4-panda.dts | 2 +- arch/arm/boot/dts/omap4-sdp-es23plus.dts | 2 +- arch/arm/boot/dts/omap4-sdp.dts | 6 +++--- arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +- arch/arm/boot/dts/omap4.dtsi | 2 +- arch/arm/boot/dts/omap443x.dtsi | 2 +- arch/arm/boot/dts/omap4460.dtsi | 2 +- arch/arm/boot/dts/omap5-board-common.dtsi | 2 +- arch/arm/boot/dts/omap5-core-thermal.dtsi | 2 +- arch/arm/boot/dts/omap5-gpu-thermal.dtsi | 2 +- arch/arm/boot/dts/omap5-uevm.dts | 2 +- arch/arm/boot/dts/omap5.dtsi | 2 +- arch/arm/boot/dts/twl6030_omap4.dtsi | 2 +- 109 files changed, 114 insertions(+), 114 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts index 386d5f89978e..56915b6d818d 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts index b0df7256db13..d8d60398d803 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts index d6aa46e8700e..8096d459b93f 100644 --- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi index 4e11a160d88f..9a79f727baf6 100644 --- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index 05e7b5d4a95b..28f001bac882 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6c9187bc0f17..2d51d4bba6d4 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ / { diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index 43bfbce41049..b5d85ef51a02 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi index 91f93bc89716..7fdb628a180f 100644 --- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi +++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts index 3124d94c0b3c..af941b74355c 100644 --- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts +++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5f31e832eb82..b4feb85e171a 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts index 5811fb8d4fdf..395ef90dfb71 100644 --- a/arch/arm/boot/dts/am335x-boneblue.dts +++ b/arch/arm/boot/dts/am335x-boneblue.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi index 7a8826633cef..9f7fb63744d0 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi +++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ &ldo3_reg { diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts index 4092cd193b8a..449e6a5688f8 100644 --- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts +++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts index c12bb0717779..18cc0f49e999 100644 --- a/arch/arm/boot/dts/am335x-bonegreen.dts +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts index b14a2759c69b..5660b5f6942d 100644 --- a/arch/arm/boot/dts/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/am335x-chiliboard.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ * Author: Rostislav Lisovy */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index b31e2f7a4ad9..43b61e43ed1e 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/ + * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/ * Author: Rostislav Lisovy */ #include "am33xx.dtsi" diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 68252dab32c3..3528856fefce 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 32f515a295ee..573574921462 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts index 0ebe9e2c150e..1918766c1f80 100644 --- a/arch/arm/boot/dts/am335x-guardian.dts +++ b/arch/arm/boot/dts/am335x-guardian.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2018 Robert Bosch Power Tools GmbH */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 021eb57261fe..b958ab56a412 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts index fef582852820..49f1c3714820 100644 --- a/arch/arm/boot/dts/am335x-lxm.dts +++ b/arch/arm/boot/dts/am335x-lxm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com + * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com */ /dts-v1/; diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts index 1e4dbc85c120..8303b832aa50 100644 --- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts index 9a6cd8ef821f..f8e0e95a751f 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts index 2298563f7334..a4e137527215 100644 --- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts +++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /* diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 1d2902083483..f841afb27844 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -1,5 +1,5 @@ //SPDX-License-Identifier: GPL-2.0 -/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/ +/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -107,7 +107,7 @@ * below to "crossed" and uncomment the video-ports -property * in tda19988 node. * AM335x errata for wiring: - * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf + * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf */ blue-and-red-wiring = "straight"; diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi index a8b6842489f7..2888b15999ee 100644 --- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi +++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Robert Nelson */ diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts index e4dcfa087a1b..d41a5ffd83cf 100644 --- a/arch/arm/boot/dts/am335x-pdu001.dts +++ b/arch/arm/boot/dts/am335x-pdu001.dts @@ -5,7 +5,7 @@ * * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/ * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index e083ea36184d..cb541372f323 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Author: Robert Nelson */ diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts index e5fdb7abb0d5..275ba339adf4 100644 --- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts +++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 3b177c9c4412..089e2750d752 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for AM33XX SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index eb3517dabee1..3642cfc80194 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -2,7 +2,7 @@ /* * See craneboard.org for more details * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi index 48631a45da51..250c40da2535 100644 --- a/arch/arm/boot/dts/am3517-evm-ui.dtsi +++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ + * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/ */ #include diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 92466b9eb6ba..04f20e7680b1 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index dc8927f14b6c..1d88e568cfef 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for am3517 SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 1b4b2b0500e4..1bb57019d082 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -2,8 +2,8 @@ /* * Device tree for Winterland IceBoard * - * http://mcgillcosmology.com - * http://threespeedlogic.com + * https://mcgillcosmology.com + * https://threespeedlogic.com * * This is an ARM + FPGA instrumentation board used at telescopes in * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 7d9f66ee9ea3..3de8e9ac2de2 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for AM4372 SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index d692e3b2812a..205269d65d9e 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x GP EVM */ diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index a958f9ee4a5a..8b986c45f09d 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4d5a7ca2e25d..5f8da0f99c70 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x SK EVM */ diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 27259fd6f741..4686853a9585 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM43x EPOS EVM */ diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi index b1c583dee10b..032c1acfcda3 100644 --- a/arch/arm/boot/dts/am57-pruss.dtsi +++ b/arch/arm/boot/dts/am57-pruss.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ * * Common PRUSS data for TI AM57xx platforms */ diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi index a80c2e3eee2e..ebf4d3cc1cfb 100644 --- a/arch/arm/boot/dts/am5718.dtsi +++ b/arch/arm/boot/dts/am5718.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72x.dtsi" diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 99a408a2ec6a..391a92e24472 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi index 9a3810f5adcc..5e0bdf16d485 100644 --- a/arch/arm/boot/dts/am5728.dtsi +++ b/arch/arm/boot/dts/am5728.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra74x.dtsi" diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi index 37ce2d7c4173..1d66278c3a72 100644 --- a/arch/arm/boot/dts/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/am572x-idk-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts index c3d966904d64..1a3af4b54308 100644 --- a/arch/arm/boot/dts/am572x-idk.dts +++ b/arch/arm/boot/dts/am572x-idk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi index 2b65317b1513..2cb577432766 100644 --- a/arch/arm/boot/dts/am5748.dtsi +++ b/arch/arm/boot/dts/am5748.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra76x.dtsi" diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts index 85c95cc551dd..c9275d0c62cf 100644 --- a/arch/arm/boot/dts/am574x-idk.dts +++ b/arch/arm/boot/dts/am574x-idk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index 94135fc5dd44..b3a0206ebd6c 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts index 39d1c4ff5749..83e174e053c7 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts index 4187a9729f96..656dd84460d2 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index a5c24ed4d12f..0a8b16505ed9 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-beagle-x15-common.dtsi" diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index 2c0aab352b44..1c77006cccd1 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "am57xx-industrial-grade.dtsi" diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi index 1c39a8459b39..e75569383dd8 100644 --- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi +++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for DRA7x SoC DSPEVE thermal * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi index f89a64cbcd53..8c80b5b26b61 100644 --- a/arch/arm/boot/dts/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra74-ipu-dsp-common.dtsi" diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 7aeb30daf3b8..a952d934fcf2 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi index dd74a5337d1f..a7077321613f 100644 --- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi +++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for DRA7x SoC IVA thermal * - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 099546be5014..cca6b123856f 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * Based on "omap4.dtsi" */ diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index a5d275ea7bd3..10da51bee42f 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra71x.dtsi" diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi index 695a08ed0360..cad0e4a2bd8d 100644 --- a/arch/arm/boot/dts/dra71x.dtsi +++ b/arch/arm/boot/dts/dra71x.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index c84b63bf0fc8..9273a7d6fa29 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 6e70858f6313..54dab0f212d1 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi index 5ff9c43ef30b..7b433f549239 100644 --- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi +++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi @@ -1,11 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ /* * Integrated Power Management Chip - * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf + * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf */ &tps65917 { diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 951152fe206a..6ea9936f7d9c 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra72-evm-common.dtsi" #include "dra72x-mmc-iodelay.dtsi" diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi index edad87c4292c..a9dce919d443 100644 --- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi @@ -1,7 +1,7 @@ /* * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs. * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index ae23ec14e8fa..d403acc754b6 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * Based on "omap4.dtsi" */ diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi index 214b9e6de2c3..e86da7a970b6 100644 --- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi +++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi @@ -1,7 +1,7 @@ /* * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs. * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 46d8e7615180..a4372a9b600f 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ * * Based on "omap4.dtsi" */ diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 820a0ece20d4..803981cc762e 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi index 42b8a205b64f..b69c7d40f5d8 100644 --- a/arch/arm/boot/dts/dra76x.dtsi +++ b/arch/arm/boot/dts/dra76x.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra74x.dtsi" diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 8a5cb44bfe2f..f9c2a9938898 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP2 SoC * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 7d660271400d..af964f139abf 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 6c5c7c0e8b94..494bf6972005 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP2420 SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts index f7e324886642..7d27e907533f 100644 --- a/arch/arm/boot/dts/omap2430-sdp.dts +++ b/arch/arm/boot/dts/omap2430-sdp.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 6a1f5bb3c06a..d19d8ba3b607 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP243x SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts index e498495b8465..cb6968a8bce8 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap3-beagle-xm.dts" diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 125ed933ca75..05077f3c75cd 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index dfa158647d91..79bc710c05fc 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi index 235ecfd61e2d..aee46fa8c055 100644 --- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP3 SoC CPU thermal * - * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index e0c0382388f0..c9332195d096 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 6a94815feb76..5cc0cf7cd16c 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi index 33132855d517..a010585d0302 100644 --- a/arch/arm/boot/dts/omap3-ha-common.dtsi +++ b/arch/arm/boot/dts/omap3-ha-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2014 Stefan Roese */ diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index c9ecbc45c8e2..b3f7f9966c3c 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2014 Stefan Roese */ diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts index 35c4e15abeb7..19e471eb3b4e 100644 --- a/arch/arm/boot/dts/omap3-ha.dts +++ b/arch/arm/boot/dts/omap3-ha.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2014 Stefan Roese */ diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index ec9ba04ef43b..9c6a92724590 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index f24e2326cfa7..764d6a5d49b4 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2014 Stefan Roese */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index 64221e3b3477..f7930f198ce5 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * Copyright (C) 2014 Stefan Roese */ diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index d240e39f2151..0482676d1830 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1296d0643943..9f1df372cee4 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP3 SoC * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index 7bfde8aac7ae..c5b903718414 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index c4dd9801840d..9c3ee4ac8165 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP34xx/OMAP35xx SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 71f3c8f1f924..9c3beefc0fe0 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP3 SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi index ab7f87ae96f0..03d054b2bf9a 100644 --- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP4/5 SoC CPU thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin * * This file is licensed under the terms of the GNU General Public License diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 64083075dd52..8fd076e5d1b0 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index a6a0c7b832dd..3e78caefa2b8 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include #include "elpida_ecb240abacn.dtsi" diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 9dd307b52604..cfa85aa3da08 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index fb2f47717b45..529d5bcceaaf 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts index 42154520d383..869f6279b5be 100644 --- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts +++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap4-sdp.dts" diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 91480ac1f328..79e7a41ecb7e 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -428,7 +428,7 @@ /* * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf + * https://www.ti.com/lit/ds/symlink/tmp105.pdf */ tmp105@48 { compatible = "ti,tmp105"; @@ -453,7 +453,7 @@ /* * 3-Axis Digital Compass - * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf + * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf */ hmc5843@1e { compatible = "honeywell,hmc5843"; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index 41de32bcf187..334cbbaa5b8b 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2014 Joachim Eastwood - * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com */ #include "omap4460.dtsi" #include "omap4-mcpdm.dtsi" diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 3fff900a42e8..847a7eff4aa9 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index cbcdcb4e7d1c..8ed510ab00c5 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP443x SoC * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2223dc0d63c0..2d3e54901b6e 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP4460 SoC * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 68ac04641bdb..edf1906016c8 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ #include "omap5.dtsi" #include diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi index de8a3d456cf7..02e76338bfbc 100644 --- a/arch/arm/boot/dts/omap5-core-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP543x SoC CORE thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin * * This file is licensed under the terms of the GNU General Public License diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi index bc3090f2e84b..bf8fa9372e57 100644 --- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi +++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi @@ -1,7 +1,7 @@ /* * Device Tree Source for OMAP543x SoC GPU thermal * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ * Contact: Eduardo Valentin * * This file is licensed under the terms of the GNU General Public License diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 9b9e9ee51b5c..51d5fcae5081 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index adffc48a6d55..5da9cff7a53c 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ * * Based on "omap4.dtsi" */ diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi index fc498d0bde8b..5730e46b0067 100644 --- a/arch/arm/boot/dts/twl6030_omap4.dtsi +++ b/arch/arm/boot/dts/twl6030_omap4.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ &twl { -- cgit v1.2.3 From cabb1f3827109372dcb80081cc654eb54f997afc Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 13 Jul 2020 08:59:31 +0200 Subject: arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Add the Khadas MCU node with active FAN thermal nodes for all the Khadas VIM3 variants. Signed-off-by: Neil Armstrong Signed-off-by: Kevin Hilman Reviewed-by: Amit Kucheria Link: https://lore.kernel.org/r/20200713065931.19845-1-narmstrong@baylibre.com --- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 1ef1e3672b96..27408c10a811 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -183,6 +183,23 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ @@ -222,6 +239,12 @@ pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; pinctrl-names = "default"; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + gpio_expander: gpio-controller@20 { compatible = "ti,tca6408"; reg = <0x20>; -- cgit v1.2.3 From aecc72b14d11327804f7ca1fc76ca88a22cc1136 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:10:08 +0200 Subject: ARM: dts: meson8: add power domain controller The Meson8 SoCs have a power domain controller which can turn on/off various register areas (such as: Ethernet, VPU, etc.). Add the main "pwrc" controller and configure the Ethernet power domain. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200620161010.23171-2-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index eedb92526968..d09d19d4423a 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include #include #include #include "meson.dtsi" @@ -454,6 +455,8 @@ ðmac { clocks = <&clkc CLKID_ETH>; clock-names = "stmmaceth"; + + power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>; }; &gpio_intc { @@ -469,6 +472,16 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + pwrc: power-controller { + compatible = "amlogic,meson8-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&pmu>; + clocks = <&clkc CLKID_VPU>; + clock-names = "vpu"; + assigned-clocks = <&clkc CLKID_VPU>; + assigned-clock-rates = <364285714>; + }; }; &hwrng { -- cgit v1.2.3 From c5d3d3cf00d5ed74359e71f7b5d003cf34ba014c Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:10:09 +0200 Subject: ARM: dts: meson8m2: add resets for the power domain controller The Meson8m2 SoCs has introduced additional reset lines for the VPU compared to Meson8. Also it uses a slightly different VPU clock frequency compared to Meson8 since it can now achieve 364MHz thanks to the addition of the GP_PLL. Add the reset lines, VPU clock configuration and update the compatible string so the implementation differences can be managed. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200620161010.23171-3-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8m2.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index 2397ba06d608..c7ddbb210366 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -61,6 +61,25 @@ }; }; +&pwrc { + compatible = "amlogic,meson8m2-pwrc"; + resets = <&reset RESET_DBLK>, + <&reset RESET_PIC_DC>, + <&reset RESET_HDMI_APB>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC_4>, + <&reset RESET_VENCL>, + <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_RDMA>; + reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci", + "vencp", "vdac", "vencl", "viu", "venc", "rdma"; + assigned-clocks = <&clkc CLKID_VPU>; + assigned-clock-rates = <364000000>; +}; + &saradc { compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; }; -- cgit v1.2.3 From 9960cacbaeb1ccc1b2d9840cadb18844d48a337b Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:10:10 +0200 Subject: ARM: dts: meson8b: add power domain controller The Meson8b SoCs have a power domain controller which can turn on/off various register areas (such as: Ethernet, VPU, etc.). Add the main "pwrc" controller and configure the Ethernet power domain. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200620161010.23171-4-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8b.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index ba36168b9c1b..2069c57343e5 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include "meson.dtsi" @@ -433,6 +434,8 @@ resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; + + power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>; }; &gpio_intc { @@ -449,6 +452,30 @@ #clock-cells = <1>; #reset-cells = <1>; }; + + pwrc: power-controller { + compatible = "amlogic,meson8b-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&pmu>; + resets = <&reset RESET_DBLK>, + <&reset RESET_PIC_DC>, + <&reset RESET_HDMI_APB>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC_4>, + <&reset RESET_VENCL>, + <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_RDMA>; + reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", + "venci", "vencp", "vdac", "vencl", "viu", + "venc", "rdma"; + clocks = <&clkc CLKID_VPU>; + clock-names = "vpu"; + assigned-clocks = <&clkc CLKID_VPU>; + assigned-clock-rates = <182142857>; + }; }; &hwrng { -- cgit v1.2.3 From 5273d6cacc067e7a8552e29cabddb4934f4e05b7 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:12:11 +0200 Subject: arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings The "amlogic,meson-gx-pwrc-vpu" binding only supports the VPU power domain, while actually there are more power domains behind that set of registers. Switch to the new bindings so we can add more power domains as needed. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200620161211.23685-1-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 18 ++++++++++-------- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++++-- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +++++-- 3 files changed, 20 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index ba63c36b22e0..0edd137151f8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include / { @@ -60,7 +61,7 @@ compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-cvbs"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; status = "disabled"; }; @@ -68,7 +69,7 @@ compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-hdmi"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; status = "disabled"; }; }; @@ -438,12 +439,6 @@ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; - pwrc_vpu: power-controller-vpu { - compatible = "amlogic,meson-gx-pwrc-vpu"; - #power-domain-cells = <0>; - amlogic,hhi-sysctrl = <&sysctrl>; - }; - clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; @@ -552,6 +547,12 @@ sysctrl: system-controller@0 { compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; + + pwrc: power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + }; }; mailbox: mailbox@404 { @@ -574,6 +575,7 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 234490d3ee68..8bf6295716e0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -747,7 +747,7 @@ }; }; -&pwrc_vpu { +&pwrc { resets = <&reset RESET_VIU>, <&reset RESET_VENC>, <&reset RESET_VCBUS>, @@ -760,6 +760,9 @@ <&reset RESET_VDI6>, <&reset RESET_VENCL>, <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "dvin", "rdma", "venci", "vencp", + "vdac", "vdi6", "vencl", "vid_lock"; clocks = <&clkc CLKID_VPU>, <&clkc CLKID_VAPB>; clock-names = "vpu", "vapb"; @@ -866,7 +869,7 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; }; &vdec { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fc59c8534c0f..fe7aaf8873f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -782,7 +782,7 @@ }; }; -&pwrc_vpu { +&pwrc { resets = <&reset RESET_VIU>, <&reset RESET_VENC>, <&reset RESET_VCBUS>, @@ -795,6 +795,9 @@ <&reset RESET_VDI6>, <&reset RESET_VENCL>, <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "dvin", "rdma", "venci", "vencp", + "vdac", "vdi6", "vencl", "vid_lock"; clocks = <&clkc CLKID_VPU>, <&clkc CLKID_VAPB>; clock-names = "vpu", "vapb"; @@ -901,7 +904,7 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; }; &vdec { -- cgit v1.2.3 From 32b5f4b63487a24712c3bfa1d6a8eb9257beb8bd Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:23:47 +0200 Subject: arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock Add the "timing-adjustment" clock now that we know how it is connected to the PRG_ETHERNET registers. It is used internally to generate the RGMII RX delay on the MAC side (if needed). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200620162347.26159-1-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 6 ++++-- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++-- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 5 +++-- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 5 +++-- 4 files changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 8e6281c685fa..b9efc8469265 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -181,8 +181,10 @@ interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", + "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 593a006f4b7b..41805f2ed8fc 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -185,8 +185,10 @@ interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", + "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; status = "disabled"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 8bf6295716e0..ea50dd434887 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -333,8 +333,9 @@ ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; }; &gpio_intc { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fe7aaf8873f2..beb5fc79d186 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -131,8 +131,9 @@ ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; mdio0: mdio { #address-cells = <1>; -- cgit v1.2.3 From 73106f75bf9498ff5d50f1052ad3cf03730d806d Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:36:52 +0200 Subject: ARM: dts: meson: add the SDHC MMC controller Meson6, Meson8, Meson8b and Meson8m2 are using a similar SDHC controller IP which typically connects to an eMMC chip (because unlike the SDIO controller the SDHC controller has an 8-bit bus interface). On Meson8, Meson8b and Meson8m2 the clock inputs are all the same. However, Meson8m2 seems to have an improved version of the SHDC controller IP which doesn't require the driver to wait manually for a flush of a DMA transfer. Thus every SoC has it's own compatible string so if more difference are discovered they can be implemented. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200620163654.37207-2-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson.dtsi | 7 +++++++ arch/arm/boot/dts/meson8.dtsi | 19 +++++++++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/meson8m2.dtsi | 4 ++++ 4 files changed, 50 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index ae89deaa8c9c..464057989572 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -140,6 +140,13 @@ status = "disabled"; }; + sdhc: mmc@8e00 { + compatible = "amlogic,meson-mx-sdhc"; + reg = <0x8e00 0x42>; + interrupts = ; + status = "disabled"; + }; + gpio_intc: interrupt-controller@9880 { compatible = "amlogic,meson-gpio-intc"; reg = <0x9880 0x10>; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index d09d19d4423a..277c0bb10453 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -386,6 +386,15 @@ }; }; + sdxc_b_pins: sdxc-b { + mux { + groups = "sdxc_d0_b", "sdxc_d13_b", + "sdxc_clk_b", "sdxc_cmd_b"; + function = "sdxc_b"; + bias-pull-up; + }; + }; + spi_nor_pins: nor { mux { groups = "nor_d", "nor_q", "nor_c", "nor_cs"; @@ -560,6 +569,16 @@ nvmem-cell-names = "temperature_calib"; }; +&sdhc { + compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc"; + clocks = <&xtal>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV5>, + <&clkc CLKID_SDHC>; + clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; +}; + &sdio { compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 2069c57343e5..2401cdf5f751 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -363,6 +363,16 @@ }; }; + sdxc_c_pins: sdxc-c { + mux { + groups = "sdxc_d0_c", "sdxc_d13_c", + "sdxc_d47_c", "sdxc_clk_c", + "sdxc_cmd_c"; + function = "sdxc_c"; + bias-pull-up; + }; + }; + pwm_c1_pins: pwm-c1 { mux { groups = "pwm_c1"; @@ -554,6 +564,16 @@ nvmem-cell-names = "temperature_calib"; }; +&sdhc { + compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc"; + clocks = <&xtal>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV5>, + <&clkc CLKID_SDHC>; + clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk"; +}; + &sdio { compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio"; clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi index c7ddbb210366..6725dd9fd825 100644 --- a/arch/arm/boot/dts/meson8m2.dtsi +++ b/arch/arm/boot/dts/meson8m2.dtsi @@ -84,6 +84,10 @@ compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc"; }; +&sdhc { + compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc"; +}; + &usb0_phy { compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy"; }; -- cgit v1.2.3 From 73501b890a6f15460613878b463319d0e0cd1632 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:36:53 +0200 Subject: ARM: dts: meson8b: ec100: enable the SDHC controller EC-100 has built-in eMMC flash which is hard-wired to 3.3V VCC (which means it's limited to high-speed MMC modes). Enable the SDHC controller to access the contents of the eMMC flash. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200620163654.37207-3-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8b-ec100.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 163a200d5a7b..ed06102a4014 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -27,6 +27,11 @@ reg = <0x40000000 0x40000000>; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + gpio-keys { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -299,6 +304,26 @@ vref-supply = <&vcc_1v8>; }; +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_c_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + max-frequency = <50000000>; + + cap-mmc-highspeed; + disable-wp; + non-removable; + no-sdio; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_3v3>; +}; + &sdio { status = "okay"; -- cgit v1.2.3 From d6a3873c7be6d58914ea5584dc7875f2045d6721 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 20 Jun 2020 18:36:54 +0200 Subject: ARM: dts: meson8b: odroidc1: enable the SDHC controller Odroid-C1 has an eMMC connector where users can optionally install an eMMC module. The eMMC modules run off a 1.8V VQMMC supply which means that HS-200 mode can be used (this is the highest mode that the SDHC controller supports). Enable the SDHC controller so eMMC modules can be accessed. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200620163654.37207-4-martin.blumenstingl@googlemail.com --- arch/arm/boot/dts/meson8b-odroidc1.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index cb21ac9f517c..0c26467de4d0 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart_AO; mmc0 = &sd_card_slot; + mmc1 = &sdhc; }; chosen { @@ -26,6 +27,11 @@ reg = <0x40000000 0x40000000>; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + leds { compatible = "gpio-leds"; blue { @@ -310,6 +316,26 @@ vref-supply = <&vcc_1v8>; }; +&sdhc { + status = "okay"; + + pinctrl-0 = <&sdxc_c_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + max-frequency = <100000000>; + + disable-wp; + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sdio; + + mmc-pwrseq = <&emmc_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; +}; + &sdio { status = "okay"; -- cgit v1.2.3 From 5b4de2f8b51b0268b7eb778fa160fc0a88ec6e72 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 3 Jul 2020 15:11:32 +0530 Subject: arm64: dts: sdm845: Add qspi opps and power-domains Add the power domain supporting performance state and the corresponding OPP tables for the qspi device on sdm845 Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593769293-6354-3-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index b0d8308a3e95..852ee8edab64 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3200,6 +3200,30 @@ status = "disabled"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qspi: spi@88df000 { compatible = "qcom,sdm845-qspi", "qcom,qspi-v1"; reg = <0 0x088df000 0 0x600>; @@ -3209,6 +3233,8 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qspi_opp_table>; status = "disabled"; }; -- cgit v1.2.3 From a24ad4878c6bd6c71968fff764fce31f9863b136 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Fri, 3 Jul 2020 15:11:33 +0530 Subject: arm64: dts: sc7180: Add qspi opps and power-domains Add the power domain supporting performance state and the corresponding OPP tables for the qspi device on sc7180 Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593769293-6354-4-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 2be81a2a1512..34a6d833f014 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2407,6 +2407,25 @@ status = "disabled"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qspi: spi@88dc000 { compatible = "qcom,qspi-v1"; reg = <0 0x088dc000 0 0x600>; @@ -2419,6 +2438,8 @@ interconnects = <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QSPI_0>; interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qspi_opp_table>; status = "disabled"; }; -- cgit v1.2.3 From 13cadb34e5932840f0610752c27b416ed2de6199 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 30 Jun 2020 14:15:09 +0530 Subject: arm64: dts: sdm845: Add OPP table for all qup devices qup has a requirement to vote on the performance state of the CX domain in sdm845 devices. Add OPP tables for these and also add power-domains property for all qup instances for uart and spi. i2c does not support scaling and uses a fixed clock. Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/1593506712-24557-2-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 83 ++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 852ee8edab64..a2161e5c9201 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1090,6 +1090,25 @@ clock-names = "core"; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -1111,6 +1130,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1135,6 +1156,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1148,6 +1171,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1172,6 +1197,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1185,6 +1212,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1209,6 +1238,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1222,6 +1253,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1246,6 +1279,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1259,6 +1294,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1283,6 +1320,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1296,6 +1335,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1320,6 +1361,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1333,6 +1376,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1357,6 +1402,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1370,6 +1417,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1394,6 +1443,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -1419,6 +1470,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1443,6 +1496,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1456,6 +1511,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1480,6 +1537,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1493,6 +1552,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1517,6 +1578,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1530,6 +1593,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1554,6 +1619,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1567,6 +1634,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1591,6 +1660,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart12_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1604,6 +1675,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1628,6 +1701,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart13_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1641,6 +1716,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1665,6 +1742,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart14_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1678,6 +1757,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1702,6 +1783,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart15_default>; interrupts = ; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; -- cgit v1.2.3 From d91ea1e0e869e1aeb46ad36ad0c0544a7888f9f5 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 30 Jun 2020 14:15:10 +0530 Subject: arm64: dts: sc7180: Add OPP table for all qup devices qup has a requirement to vote on the performance state of the CX domain in sc7180 devices. Add OPP tables for these and also add power-domains property for all qup instances for uart and spi. i2c does not support scaling and uses a fixed clock. Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593506712-24557-3-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 34a6d833f014..725a47a977cb 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -697,6 +697,25 @@ status = "disabled"; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -739,6 +758,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -753,6 +774,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -787,6 +810,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -801,6 +826,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -833,6 +860,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -867,6 +896,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -881,6 +912,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -913,6 +946,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -947,6 +982,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -961,6 +998,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; interconnect-names = "qup-core", "qup-config"; @@ -1010,6 +1049,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1024,6 +1065,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1056,6 +1099,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1090,6 +1135,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1104,6 +1151,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1136,6 +1185,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1170,6 +1221,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1184,6 +1237,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1218,6 +1273,8 @@ interrupts = ; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; @@ -1232,6 +1289,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = ; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; interconnect-names = "qup-core", "qup-config"; -- cgit v1.2.3 From 6123e7443fecda48626fed1782dd422014ddbb4a Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 30 Jun 2020 14:15:11 +0530 Subject: arm64: dts: sdm845: Add sdhc opps and power-domains Add the power domain supporting performance state and the corresponding OPP tables for the sdhc device on sdm845. Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593506712-24557-4-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index a2161e5c9201..c7bbb290bfcf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3279,8 +3279,34 @@ <&gcc GCC_SDCC2_APPS_CLK>; clock-names = "iface", "core"; iommus = <&apps_smmu 0xa0 0xf>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&sdhc2_opp_table>; status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-9600000 { + opp-hz = /bits/ 64 <9600000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; qspi_opp_table: qspi-opp-table { -- cgit v1.2.3 From ccc6e8a1d6e936643e4b7e5b35f9456a7e36365c Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Tue, 30 Jun 2020 14:15:12 +0530 Subject: arm64: dts: sc7180: Add sdhc opps and power-domains Add the power domain supporting performance state and the corresponding OPP tables for the sdhc device on sc7180. Reviewed-by: Matthias Kaehlcke Signed-off-by: Rajendra Nayak Link: https://lore.kernel.org/r/1593506712-24557-5-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 725a47a977cb..126e2fce26c1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -684,6 +684,8 @@ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc1_opp_table>; bus-width = <8>; non-removable; @@ -695,6 +697,20 @@ mmc-hs400-enhanced-strobe; status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; qup_opp_table: qup-opp-table { @@ -2460,10 +2476,26 @@ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; clock-names = "core", "iface"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>; status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; qspi_opp_table: qspi-opp-table { -- cgit v1.2.3 From 0db53013cd7429409f37386fb7f4616dabcc5023 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:59:48 -0700 Subject: ARM: OMAP2+: Drop legacy platform data for omap5 dwc3 We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4.dtsi | 1 - arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 52 ------------------------------ 2 files changed, 53 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 5217805bf126..4fad290b5819 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -167,7 +167,6 @@ target-module@20000 { /* 0x4a020000, ap 109 08.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss"; reg = <0x20000 0x4>, <0x20010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 4cb194ac7a7e..4bb2503cf44a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -375,49 +375,6 @@ static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = { }, }; -/* - * 'usb_otg_ss' class - * 2.0 super speed (usb_otg_ss) controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_usb_otg_ss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_usb_otg_ss_hwmod_class = { - .name = "usb_otg_ss", - .sysc = &omap54xx_usb_otg_ss_sysc, -}; - -/* usb_otg_ss */ -static struct omap_hwmod_opt_clk usb_otg_ss_opt_clks[] = { - { .role = "refclk960m", .clk = "usb_otg_ss_refclk960m" }, -}; - -static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = { - .name = "usb_otg_ss", - .class = &omap54xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3init_clkdm", - .flags = HWMOD_SWSUP_SIDLE, - .main_clk = "dpll_core_h13x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = usb_otg_ss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss_opt_clks), -}; - /* * 'sata' class * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) @@ -635,14 +592,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_otg_ss */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_usb_otg_ss_hwmod, - .clk = "dpll_core_h13x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__dmm, &omap54xx_l3_main_3__l3_instr, @@ -665,7 +614,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__mpu, &omap54xx_l4_cfg__usb_host_hs, &omap54xx_l4_cfg__usb_tll_hs, - &omap54xx_l4_cfg__usb_otg_ss, &omap54xx_l4_cfg__sata, NULL, }; -- cgit v1.2.3 From c7b72abca61ecf7dd4f6203b14cbf0fe79b0a109 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:59:48 -0700 Subject: ARM: OMAP2+: Drop legacy platform data for dra7 dwc3 We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 4 - arch/arm/boot/dts/dra74x.dtsi | 58 +++++++---- arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 155 +----------------------------- 3 files changed, 41 insertions(+), 176 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 62ca89551219..c83a3d7b5c5b 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -4007,7 +4007,6 @@ target-module@80000 { /* 0x48880000, ap 83 0e.1 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss1"; reg = <0x80000 0x4>, <0x80010 0x4>; reg-names = "rev", "sysc"; @@ -4057,7 +4056,6 @@ target-module@c0000 { /* 0x488c0000, ap 79 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss2"; reg = <0xc0000 0x4>, <0xc0010 0x4>; reg-names = "rev", "sysc"; @@ -4108,7 +4106,6 @@ usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss3"; reg = <0x100000 0x4>, <0x100010 0x4>; reg-names = "rev", "sysc"; @@ -4157,7 +4154,6 @@ usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_otg_ss4"; reg = <0x140000 0x4>, <0x140010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 46d8e7615180..f9c902484699 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -49,27 +49,47 @@ reg = <0x41500000 0x100>; }; - omap_dwc3_4: omap_dwc3_4@48940000 { - compatible = "ti,dwc3"; - ti,hwmods = "usb_otg_ss4"; - reg = <0x48940000 0x10000>; - interrupts = ; + target-module@48940000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x48940000 0x4>, + <0x48940010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = ; + ti,sysc-midle = , + , + , + ; + ti,sysc-sidle = , + , + , + ; + clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - utmi-mode = <2>; - ranges; - status = "disabled"; - usb4: usb@48950000 { - compatible = "snps,dwc3"; - reg = <0x48950000 0x17000>; - interrupts = , - , - ; - interrupt-names = "peripheral", - "host", - "otg"; - maximum-speed = "high-speed"; - dr_mode = "otg"; + ranges = <0x0 0x48940000 0x20000>; + + omap_dwc3_4: omap_dwc3_4@0 { + compatible = "ti,dwc3"; + reg = <0 0x10000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@10000 { + compatible = "snps,dwc3"; + reg = <0x10000 0x17000>; + interrupts = , + , + ; + interrupt-names = "peripheral", + "host", + "otg"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; }; }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 07b7458deae4..adb07848de96 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -491,101 +491,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = { }, }; -/* - * 'usb_otg_ss' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = { - .name = "usb_otg_ss", - .sysc = &dra7xx_usb_otg_ss_sysc, -}; - -/* usb_otg_ss1 */ -static struct omap_hwmod_opt_clk usb_otg_ss1_opt_clks[] = { - { .role = "refclk960m", .clk = "usb_otg_ss1_refclk960m" }, -}; - -static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = { - .name = "usb_otg_ss1", - .class = &dra7xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "dpll_core_h13x2_ck", - .flags = HWMOD_CLKDM_NOAUTO, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = usb_otg_ss1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss1_opt_clks), -}; - -/* usb_otg_ss2 */ -static struct omap_hwmod_opt_clk usb_otg_ss2_opt_clks[] = { - { .role = "refclk960m", .clk = "usb_otg_ss2_refclk960m" }, -}; - -static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = { - .name = "usb_otg_ss2", - .class = &dra7xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "dpll_core_h13x2_ck", - .flags = HWMOD_CLKDM_NOAUTO, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, - .opt_clks = usb_otg_ss2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_ss2_opt_clks), -}; - -/* usb_otg_ss3 */ -static struct omap_hwmod dra7xx_usb_otg_ss3_hwmod = { - .name = "usb_otg_ss3", - .class = &dra7xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "dpll_core_h13x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* usb_otg_ss4 */ -static struct omap_hwmod dra7xx_usb_otg_ss4_hwmod = { - .name = "usb_otg_ss4", - .class = &dra7xx_usb_otg_ss_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "dpll_core_h13x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'vcp' class * @@ -813,38 +718,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_per3 -> usb_otg_ss1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_usb_otg_ss1_hwmod, - .clk = "dpll_core_h13x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> usb_otg_ss2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss2 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_usb_otg_ss2_hwmod, - .clk = "dpll_core_h13x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> usb_otg_ss3 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss3 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_usb_otg_ss3_hwmod, - .clk = "dpll_core_h13x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per3 -> usb_otg_ss4 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss4 = { - .master = &dra7xx_l4_per3_hwmod, - .slave = &dra7xx_usb_otg_ss4_hwmod, - .clk = "dpll_core_h13x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> vcp1 */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = { .master = &dra7xx_l3_main_1_hwmod, @@ -900,9 +773,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l4_cfg__pciess2, &dra7xx_l3_main_1__qspi, &dra7xx_l4_cfg__sata, - &dra7xx_l4_per3__usb_otg_ss1, - &dra7xx_l4_per3__usb_otg_ss2, - &dra7xx_l4_per3__usb_otg_ss3, &dra7xx_l3_main_1__vcp1, &dra7xx_l4_per2__vcp1, &dra7xx_l3_main_1__vcp2, @@ -911,20 +781,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { }; /* SoC variant specific hwmod links */ -static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = { - &dra7xx_l4_per3__usb_otg_ss4, - NULL, -}; - -static struct omap_hwmod_ocp_if *acd_76x_hwmod_ocp_ifs[] __initdata = { - NULL, -}; - -static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = { - &dra7xx_l4_per3__usb_otg_ss4, - NULL, -}; - static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { NULL, }; @@ -942,21 +798,14 @@ int __init dra7xx_hwmod_init(void) ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); if (!ret && soc_is_dra74x()) { - ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs); - if (!ret) - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); + ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); } else if (!ret && soc_is_dra72x()) { ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); if (!ret && !of_machine_is_compatible("ti,dra718")) ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); } else if (!ret && soc_is_dra76x()) { - ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs); - - if (!ret && soc_is_dra76x_acd()) { - ret = omap_hwmod_register_links(acd_76x_hwmod_ocp_ifs); - } else if (!ret && soc_is_dra76x_abz()) { + if (!ret && soc_is_dra76x_abz()) ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } } return ret; -- cgit v1.2.3 From 509b1377eb52f708b003e752be69053e0211b44e Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:59:49 -0700 Subject: ARM: OMAP2+: Drop legacy platform data for omap4 usb We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-l4.dtsi | 2 - arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 193 ----------------------------- 2 files changed, 195 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index fcc52121ff09..1db9b0d33ec7 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -240,7 +240,6 @@ target-module@62000 { /* 0x4a062000, ap 11 16.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_tll_hs"; reg = <0x62000 0x4>, <0x62010 0x4>, <0x62014 0x4>; @@ -268,7 +267,6 @@ target-module@64000 { /* 0x4a064000, ap 86 1e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_host_hs"; reg = <0x64000 0x4>, <0x64010 0x4>, <0x64014 0x4>; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index de13c46b984f..665ca74a834a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -639,154 +639,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = { }, }; -/* - * 'usb_host_fs' class - * full-speed usb host controller - */ - -/* The IP is not compliant to type1 / type2 scheme */ -static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0210, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type_usb_host_fs, -}; - -static struct omap_hwmod_class omap44xx_usb_host_fs_hwmod_class = { - .name = "usb_host_fs", - .sysc = &omap44xx_usb_host_fs_sysc, -}; - -/* usb_host_fs */ -static struct omap_hwmod omap44xx_usb_host_fs_hwmod = { - .name = "usb_host_fs", - .class = &omap44xx_usb_host_fs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "usb_host_fs_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'usb_host_hs' class - * high-speed multi-port usb host controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = { - .name = "usb_host_hs", - .sysc = &omap44xx_usb_host_hs_sysc, -}; - -/* usb_host_hs */ -static struct omap_hwmod omap44xx_usb_host_hs_hwmod = { - .name = "usb_host_hs", - .class = &omap44xx_usb_host_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "usb_host_hs_fck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - - /* - * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock - * id: i660 - * - * Description: - * In the following configuration : - * - USBHOST module is set to smart-idle mode - * - PRCM asserts idle_req to the USBHOST module ( This typically - * happens when the system is going to a low power mode : all ports - * have been suspended, the master part of the USBHOST module has - * entered the standby state, and SW has cut the functional clocks) - * - an USBHOST interrupt occurs before the module is able to answer - * idle_ack, typically a remote wakeup IRQ. - * Then the USB HOST module will enter a deadlock situation where it - * is no more accessible nor functional. - * - * Workaround: - * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE - */ - - /* - * Errata: USB host EHCI may stall when entering smart-standby mode - * Id: i571 - * - * Description: - * When the USBHOST module is set to smart-standby mode, and when it is - * ready to enter the standby state (i.e. all ports are suspended and - * all attached devices are in suspend mode), then it can wrongly assert - * the Mstandby signal too early while there are still some residual OCP - * transactions ongoing. If this condition occurs, the internal state - * machine may go to an undefined state and the USB link may be stuck - * upon the next resume. - * - * Workaround: - * Don't use smart standby; use only force standby, - * hence HWMOD_SWSUP_MSTANDBY - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, -}; - -/* - * 'usb_tll_hs' class - * usb_tll_hs module is the adapter on the usb_host_hs ports - */ - -static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = { - .name = "usb_tll_hs", - .sysc = &omap44xx_usb_tll_hs_sysc, -}; - -static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = { - .name = "usb_tll_hs", - .class = &omap44xx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3_init_clkdm", - .main_clk = "usb_tll_hs_ick", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * interfaces */ @@ -895,22 +747,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { - .master = &omap44xx_usb_host_fs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* usb_host_hs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = { - .master = &omap44xx_usb_host_hs_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l3_main_3 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { .master = &omap44xx_l3_main_1_hwmod, @@ -1119,30 +955,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_host_fs_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> usb_host_hs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_host_hs_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> usb_tll_hs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_usb_tll_hs_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = { .master = &omap44xx_mpu_hwmod, @@ -1173,8 +985,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - /* &omap44xx_usb_host_fs__l3_main_2, */ - &omap44xx_usb_host_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, @@ -1201,9 +1011,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, /* &omap44xx_l3_main_2__sl2if, */ - /* &omap44xx_l4_cfg__usb_host_fs, */ - &omap44xx_l4_cfg__usb_host_hs, - &omap44xx_l4_cfg__usb_tll_hs, &omap44xx_mpu__emif1, &omap44xx_mpu__emif2, NULL, -- cgit v1.2.3 From cca3f3e6f91c2db7bf58ddcccb65c34369728381 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 13 Jul 2020 09:59:49 -0700 Subject: ARM: OMAP2+: Drop legacy platform data for omap5 usb host We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-l4.dtsi | 2 - arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 127 ----------------------------- 2 files changed, 129 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 4fad290b5819..32f01986bc3e 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -268,7 +268,6 @@ target-module@62000 { /* 0x4a062000, ap 11 0e.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "usb_tll_hs"; reg = <0x62000 0x4>, <0x62010 0x4>, <0x62014 0x4>; @@ -297,7 +296,6 @@ target-module@64000 { /* 0x4a064000, ap 71 1e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "usb_host_hs"; reg = <0x64000 0x4>, <0x64010 0x4>; reg-names = "rev", "sysc"; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 4bb2503cf44a..7c38c1ba58ac 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -266,115 +266,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = { }, }; -/* - * 'usb_host_hs' class - * high-speed multi-port usb host controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = { - .name = "usb_host_hs", - .sysc = &omap54xx_usb_host_hs_sysc, -}; - -static struct omap_hwmod omap54xx_usb_host_hs_hwmod = { - .name = "usb_host_hs", - .class = &omap54xx_usb_host_hs_hwmod_class, - .clkdm_name = "l3init_clkdm", - /* - * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock - * id: i660 - * - * Description: - * In the following configuration : - * - USBHOST module is set to smart-idle mode - * - PRCM asserts idle_req to the USBHOST module ( This typically - * happens when the system is going to a low power mode : all ports - * have been suspended, the master part of the USBHOST module has - * entered the standby state, and SW has cut the functional clocks) - * - an USBHOST interrupt occurs before the module is able to answer - * idle_ack, typically a remote wakeup IRQ. - * Then the USB HOST module will enter a deadlock situation where it - * is no more accessible nor functional. - * - * Workaround: - * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE - */ - - /* - * Errata: USB host EHCI may stall when entering smart-standby mode - * Id: i571 - * - * Description: - * When the USBHOST module is set to smart-standby mode, and when it is - * ready to enter the standby state (i.e. all ports are suspended and - * all attached devices are in suspend mode), then it can wrongly assert - * the Mstandby signal too early while there are still some residual OCP - * transactions ongoing. If this condition occurs, the internal state - * machine may go to an undefined state and the USB link may be stuck - * upon the next resume. - * - * Workaround: - * Don't use smart standby; use only force standby, - * hence HWMOD_SWSUP_MSTANDBY - */ - - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3init_60m_fclk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'usb_tll_hs' class - * usb_tll_hs module is the adapter on the usb_host_hs ports - */ - -static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = { - .name = "usb_tll_hs", - .sysc = &omap54xx_usb_tll_hs_sysc, -}; - -static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = { - .name = "usb_tll_hs", - .class = &omap54xx_usb_tll_hs_hwmod_class, - .clkdm_name = "l3init_clkdm", - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'sata' class * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) @@ -576,22 +467,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4_cfg -> usb_host_hs */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_usb_host_hs_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> usb_tll_hs */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_usb_tll_hs_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__dmm, &omap54xx_l3_main_3__l3_instr, @@ -612,8 +487,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_cfg__mpu, - &omap54xx_l4_cfg__usb_host_hs, - &omap54xx_l4_cfg__usb_tll_hs, &omap54xx_l4_cfg__sata, NULL, }; -- cgit v1.2.3 From 433f9a57298fce84b7e91036a1ab26496b67be03 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Fri, 10 Jul 2020 00:20:10 -0700 Subject: arm64: dts: sdm845: add Inline Crypto Engine registers and clock Add the vendor-specific registers and clock for Qualcomm ICE (Inline Crypto Engine) to the device tree node for the UFS host controller on sdm845, so that the ufs-qcom driver will be able to use inline crypto. Use a separate register range rather than extending the main UFS range because there's a gap between the two, and the ICE registers are vendor-specific. (Actually, the hardware claims that the ICE range also includes the array of standard crypto configuration registers; however, on this SoC the Linux kernel isn't permitted to access them directly.) Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20200710072013.177481-4-ebiggers@kernel.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index c7bbb290bfcf..759cdd0b002b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2060,7 +2060,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; interrupts = ; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -2080,7 +2082,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -2089,7 +2092,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <50000000 200000000>, <0 0>, @@ -2098,7 +2102,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <0 300000000>; status = "disabled"; }; -- cgit v1.2.3 From 644c569d7e540a7e447108b7e9087dbff8e06a93 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:13:52 +0200 Subject: arm64: tegra: Use proper tuple notation Tuple boundaries should be marked by < and > to make it clear which cells are part of the same tuple. This also helps the json-schema based validation tooling to properly parse this data. While at it, also remove the "immovable" bit from PCI addresses. All of these addresses are in fact "movable". Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 20 ++--- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 18 ++-- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 112 ++++++++++++------------- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 3 +- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 20 ++--- 5 files changed, 87 insertions(+), 86 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 0cc6b4e9f954..9d6a214d86d7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -17,9 +17,9 @@ pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = , /* controller interrupt */ ; /* MSI interrupt */ @@ -33,11 +33,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA124_CLK_PCIE>, <&tegra_car TEGRA124_CLK_AFI>, @@ -857,8 +857,8 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra132-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */ - 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */ + <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ reg-names = "soctherm-reg", "ccroc-reg"; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 03b24f8640b3..726caa72117c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -776,9 +776,9 @@ compatible = "nvidia,tegra186-pcie"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; device_type = "pci"; - reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x40000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = , /* controller interrupt */ @@ -793,12 +793,12 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ - 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ - 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ - 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */ + <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */ + <0x01000000 0 0x0 0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */ + <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ clocks = <&bpmp TEGRA186_CLK_AFI>, <&bpmp TEGRA186_CLK_PCIE>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index d5246c75b782..72ba5146b0a9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -144,8 +144,8 @@ pinmux: pinmux@2430000 { compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000 - 0xc300000 0x4000>; + reg = <0x2430000 0x17000>, + <0xc300000 0x4000>; status = "okay"; @@ -1404,10 +1404,10 @@ pcie@14100000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1442,9 +1442,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ + <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; @@ -1454,10 +1454,10 @@ pcie@14120000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1492,9 +1492,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x01000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ + <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; @@ -1504,10 +1504,10 @@ pcie@14140000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1542,9 +1542,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x01000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ + <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; @@ -1554,10 +1554,10 @@ pcie@14160000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1592,9 +1592,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x01000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ + <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; @@ -1604,10 +1604,10 @@ pcie@14180000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1642,9 +1642,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ + <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; @@ -1654,10 +1654,10 @@ pcie@141a0000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1696,9 +1696,9 @@ bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x01000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000>, /* downstream I/O (1MB) */ + <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ + <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; @@ -1708,10 +1708,10 @@ pcie_ep@14160000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x36080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; @@ -1740,10 +1740,10 @@ pcie_ep@14180000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x38080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; @@ -1772,10 +1772,10 @@ pcie_ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 16a5960e7f63..0f4857c07059 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1387,7 +1387,8 @@ spmic-default-output-high { gpio-hog; output-high; - gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>; + gpios = <2 GPIO_ACTIVE_HIGH>, + <7 GPIO_ACTIVE_HIGH>; }; fps { diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 1f7dc518b394..356fefda939f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -18,9 +18,9 @@ pcie@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = , /* controller interrupt */ ; /* MSI interrupt */ @@ -34,11 +34,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA210_CLK_PCIE>, <&tegra_car TEGRA210_CLK_AFI>, @@ -1546,8 +1546,8 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra210-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ + <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; interrupts = , ; -- cgit v1.2.3 From ef126bc4f3d450b236bb82742a5e135d18b0b28b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:17:34 +0200 Subject: arm64: tegra: Do not mark host1x as simple bus The host1x is not a simple bus, so drop the corresponding compatible string. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 3 +-- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +- 4 files changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 9d6a214d86d7..bac8dd2a09b6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -81,8 +81,7 @@ host1x@50000000 { compatible = "nvidia,tegra132-host1x", - "nvidia,tegra124-host1x", - "simple-bus"; + "nvidia,tegra124-host1x"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 726caa72117c..fb01e5f974f2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -934,7 +934,7 @@ }; host1x@13e00000 { - compatible = "nvidia,tegra186-host1x", "simple-bus"; + compatible = "nvidia,tegra186-host1x"; reg = <0x0 0x13e00000 0x0 0x10000>, <0x0 0x13e10000 0x0 0x10000>; reg-names = "hypervisor", "vm"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 72ba5146b0a9..bf696ada856c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1036,7 +1036,7 @@ }; host1x@13e00000 { - compatible = "nvidia,tegra194-host1x", "simple-bus"; + compatible = "nvidia,tegra194-host1x"; reg = <0x13e00000 0x10000>, <0x13e10000 0x10000>; reg-names = "hypervisor", "vm"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 356fefda939f..96d87f514db7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -86,7 +86,7 @@ }; host1x@50000000 { - compatible = "nvidia,tegra210-host1x", "simple-bus"; + compatible = "nvidia,tegra210-host1x"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = , /* syncpt */ ; /* general */ -- cgit v1.2.3 From abc9c8a55e7908ff0cd75caa83206d2eac691f20 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:18:31 +0200 Subject: arm64: tegra: Use sor0_out clock on Tegra132 The sor0_out clock is required to make eDP work properly. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index bac8dd2a09b6..f33b2041c9f4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -141,10 +141,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_SOR0_OUT>, <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, <&tegra_car TEGRA124_CLK_PLL_DP>, <&tegra_car TEGRA124_CLK_CLK_M>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; status = "disabled"; -- cgit v1.2.3 From 4473b1e816c3465489cfe4d3654d3048ac69eb8f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:20:15 +0200 Subject: arm64: tegra: Tegra132 EMC is not compatible with Tegra124 The external memory controller found on Tegra132 is not fully compatible with the instantiation on Tegra124, so remove the corresponding string from the list of compatible strings. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index f33b2041c9f4..44fe396914eb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -605,7 +605,7 @@ }; emc: external-memory-controller@7001b000 { - compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; + compatible = "nvidia,tegra132-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_EMC>; clock-names = "emc"; -- cgit v1.2.3 From 27e2c65712ed45a806d721c2dca2feefcde8b968 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:22:14 +0200 Subject: arm64: tegra: Add missing #phy-cells property to USB PHYs USB PHYs must have a #phy-cells property, so add one to the Tegra USB PHYs which don't have one. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 44fe396914eb..66710429e429 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -1113,6 +1113,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1151,6 +1152,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1188,6 +1190,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; -- cgit v1.2.3 From c8d05184a066d1122fb61840ef604f45474e1671 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:28:15 +0200 Subject: arm64: tegra: Remove unneeded power supplies On Tegra186 and later, the BPMP is responsible for enabling/disabling the PCIe related power supplies of the pad controller and there is no need for the operating system to control them, so they can be removed. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 43b8d643e7a1..482ed7b0fcff 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -119,10 +119,6 @@ avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; - dvdd-pex-supply = <&vdd_pex>; - dvdd-pex-pll-supply = <&vdd_pex>; - hvdd-pex-supply = <&vdd_1v8>; - hvdd-pex-pll-supply = <&vdd_1v8>; vclamp-usb-supply = <&vdd_1v8>; vddio-hsic-supply = <&gnd>; -- cgit v1.2.3 From 1ca6bc896a81696e25b2cd6dd093c8439af315a5 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:31:55 +0200 Subject: arm64: tegra: Update USB connector nodes Use the preferred {id,vbus}-gpios over the {id,vbus}-gpio properties and fix the ordering of compatible strings (most-specific ones should come first). Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 15 +++++++-------- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 12 ++++++------ arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 10 +++++----- 3 files changed, 18 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 482ed7b0fcff..4a7a022acabb 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -171,19 +171,18 @@ status = "okay"; mode = "otg"; vbus-supply = <&vdd_usb0>; - usb-role-switch; + connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio - TEGRA186_MAIN_GPIO(X, 7) - GPIO_ACTIVE_LOW>; - id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio + TEGRA186_MAIN_GPIO(X, 7) + GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - }; usb2-1 { diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 98f8f97a19b2..83f74ff43fd4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1461,17 +1461,17 @@ usb2-0 { status = "okay"; vbus-supply = <&vdd_usb_vbus_otg>; + usb-role-switch; mode = "otg"; - usb-role-switch; connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) - GPIO_ACTIVE_LOW>; - id-gpio = <&pmic 0 0>; + vbus-gpios = <&gpio TEGRA_GPIO(Z, 0) + GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 4916bed7e410..f9fdacdc40f5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -513,15 +513,15 @@ usb2-0 { status = "okay"; mode = "peripheral"; - usb-role-switch; + connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) - GPIO_ACTIVE_LOW>; + vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) + GPIO_ACTIVE_LOW>; }; }; -- cgit v1.2.3 From 9efa0fca4cc438d68af37731a5c354469571d2b7 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:34:27 +0200 Subject: arm64: tegra: Use standard EEPROM properties The address-bits and page-size properties that are currently used are not valid properties according to the bindings. Use the address-width and pagesize properties instead. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 4 ++-- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 8 ++++---- 5 files changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 4a7a022acabb..a70fd4e86840 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -222,8 +222,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index b5568b9ff181..654c55ed048b 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -174,8 +174,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index d818fac3070c..6a4b50aaa25d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -274,8 +274,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index ea0e1efa6973..3893ce2be3ba 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -87,8 +87,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index f9fdacdc40f5..31c3f8b45c67 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -119,8 +119,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -130,8 +130,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; -- cgit v1.2.3 From a57421390def6c69198e59a28560977c5711af6e Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:37:09 +0200 Subject: arm64: tegra: Remove XUSB pad controller interrupt from XUSB node The XUSB controller doesn't need the XUSB pad controller's interrupt, so remove it. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 3 +-- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index fb01e5f974f2..902411702fd4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -568,8 +568,7 @@ <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; interrupts = , - , - ; + ; clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, <&bpmp TEGRA186_CLK_XUSB_FALCON>, <&bpmp TEGRA186_CLK_XUSB_SS>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index bf696ada856c..4d6f2127dd4a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -688,8 +688,7 @@ reg-names = "hcd", "fpci"; interrupts = , - , - ; + ; clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, <&bpmp TEGRA194_CLK_XUSB_FALCON>, -- cgit v1.2.3 From 78b9bad6512b0df3996c8d58224fcbcf03d84ff3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:39:13 +0200 Subject: arm64: tegra: Fix {clock,reset}-names ordering It's very difficult to describe string lists that can be in arbitrary order using the json-schema based validation tooling. Since the OS is not going to care either way, take the easy way out and reorder these entries to match the order defined in the bindings. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 902411702fd4..d8d6173eedf2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -799,15 +799,15 @@ <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */ <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ - clocks = <&bpmp TEGRA186_CLK_AFI>, - <&bpmp TEGRA186_CLK_PCIE>, + clocks = <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_AFI>, <&bpmp TEGRA186_CLK_PLLE>; - clock-names = "afi", "pex", "pll_e"; + clock-names = "pex", "afi", "pll_e"; - resets = <&bpmp TEGRA186_RESET_AFI>, - <&bpmp TEGRA186_RESET_PCIE>, + resets = <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_AFI>, <&bpmp TEGRA186_RESET_PCIEXCLK>; - reset-names = "afi", "pex", "pcie_x"; + reset-names = "pex", "afi", "pcie_x"; interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>, <&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>; -- cgit v1.2.3 From aa342b536d51e358221385908e010b2e71a69fdd Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:42:04 +0200 Subject: arm64: tegra: Do not mark display hub as simple bus The display hub on Tegra186 and Tegra194 is not a simple bus, so drop the corresponding compatible string. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 2 +- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index d8d6173eedf2..a9412e23e2da 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -990,7 +990,7 @@ }; display-hub@15200000 { - compatible = "nvidia,tegra186-display", "simple-bus"; + compatible = "nvidia,tegra186-display"; reg = <0x15200000 0x00040000>; resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 4d6f2127dd4a..3089ebecfbef 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1055,7 +1055,7 @@ interconnect-names = "dma-mem"; display-hub@15200000 { - compatible = "nvidia,tegra194-display", "simple-bus"; + compatible = "nvidia,tegra194-display"; reg = <0x15200000 0x00040000>; resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>, -- cgit v1.2.3 From e867fe41b87ab82255bbe95df87f8943a463c53a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:44:58 +0200 Subject: arm64: tegra: Use standard names for SRAM nodes SRAM nodes should be named sram@ to match the bindings. While at it, also remove the unneeded, custom compatible string for SRAM partition nodes. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 +++----- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 8 +++----- 2 files changed, 6 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index a9412e23e2da..34d249d85da7 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -1262,22 +1262,20 @@ interconnect-names = "dma-mem", "write-0", "read-1", "write-1"; }; - sysram@30000000 { + sram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x30000000 0x50000>; - cpu_bpmp_tx: shmem@4e000 { - compatible = "nvidia,tegra186-bpmp-shmem"; + cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; label = "cpu-bpmp-tx"; pool; }; - cpu_bpmp_rx: shmem@4f000 { - compatible = "nvidia,tegra186-bpmp-shmem"; + cpu_bpmp_rx: sram@4f000 { reg = <0x4f000 0x1000>; label = "cpu-bpmp-rx"; pool; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 3089ebecfbef..2ecb80e1b09d 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1803,22 +1803,20 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; }; - sysram@40000000 { + sram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x50000>; - cpu_bpmp_tx: shmem@4e000 { - compatible = "nvidia,tegra194-bpmp-shmem"; + cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; label = "cpu-bpmp-tx"; pool; }; - cpu_bpmp_rx: shmem@4f000 { - compatible = "nvidia,tegra194-bpmp-shmem"; + cpu_bpmp_rx: sram@4f000 { reg = <0x4f000 0x1000>; label = "cpu-bpmp-rx"; pool; -- cgit v1.2.3 From 75b5608a5ea2d50da3b9f19a28cd9cd20322bf97 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 09:54:49 +0200 Subject: arm64: tegra: Remove unused interrupts from Tegra194 AON GPIO The AON GPIO controller on Tegra194 currently only uses a single interrupt, so remove the extra ones. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 2ecb80e1b09d..e0aa6c74073a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -999,10 +999,7 @@ reg-names = "security", "gpio"; reg = <0xc2f0000 0x1000>, <0xc2f1000 0x1000>; - interrupts = , - , - , - ; + interrupts = ; gpio-controller; #gpio-cells = <2>; interrupt-controller; -- cgit v1.2.3 From 4b32eb1c2c6856cf0aba6e298c7abfc6fefd5102 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 25 Jun 2020 13:41:38 +0200 Subject: arm64: tegra: Fix indentation in Tegra132 device tree Properly indent subsequent lines so that they align with the first line. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 66710429e429..fefaf392ce56 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -862,7 +862,7 @@ reg-names = "soctherm-reg", "ccroc-reg"; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; + <&tegra_car TEGRA124_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; resets = <&tegra_car 78>; reset-names = "soctherm"; -- cgit v1.2.3 From 58be18be3a818f0c96c1ff823fa9b723f0517238 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:44:09 +0200 Subject: arm64: tegra: Fix indentation in Tegra194 device tree Properly indent subsequent lines so that they align with the first line. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index e0aa6c74073a..307f999edbf9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1669,7 +1669,7 @@ pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, - <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; + <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; clock-names = "core", "core_m"; resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, -- cgit v1.2.3 From df93557b39a99722f3a93b55617f7eaec9bab515 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:46:30 +0200 Subject: arm64: tegra: Rename agic -> interrupt-controller Device tree nodes for interrupt controllers should be named "interrupt- controller", so rename the AGIC accordingly. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 2 +- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts index 3893ce2be3ba..56adf287a82c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts @@ -122,7 +122,7 @@ status = "okay"; }; - agic@702f9000 { + interrupt-controller@702f9000 { status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index e8dfba328ce5..cdc331ac5a3e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1721,7 +1721,7 @@ status = "okay"; }; - agic@702f9000 { + interrupt-controller@702f9000 { status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 96d87f514db7..c0efa199ac70 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1355,7 +1355,7 @@ status = "disabled"; }; - agic: agic@702f9000 { + agic: interrupt-controller@702f9000 { compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; -- cgit v1.2.3 From bb6782989df86338a64c856a2e318c3e04a699de Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:48:25 +0200 Subject: arm64: tegra: Various fixes for PMICs Standardize on "pmic" as the node name for the PMIC on Tegra210 systems and use consistent names for pinmux and GPIO hog nodes. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi | 37 +++++++++++++------------- arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 14 +++++----- 2 files changed, 25 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi index 0f4857c07059..41beab626d95 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi @@ -1328,7 +1328,7 @@ status = "okay"; clock-frequency = <400000>; - max77620: max77620@3c { + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; interrupts = ; @@ -1343,12 +1343,12 @@ pinctrl-0 = <&max77620_default>; max77620_default: pinmux@0 { - pin_gpio0 { + gpio0 { pins = "gpio0"; function = "gpio"; }; - pin_gpio1 { + gpio1 { pins = "gpio1"; function = "fps-out"; drive-push-pull = <1>; @@ -1357,34 +1357,33 @@ maxim,active-fps-power-down-slot = <0>; }; - pin_gpio2_3 { - pins = "gpio2", "gpio3"; + gpio2 { + pins = "gpio2"; function = "fps-out"; drive-open-drain = <1>; maxim,active-fps-source = ; }; - pin_gpio4 { + gpio3 { + pins = "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = ; + }; + + gpio4 { pins = "gpio4"; function = "32k-out1"; }; - pin_gpio5_6_7 { + gpio5_6_7 { pins = "gpio5", "gpio6", "gpio7"; function = "gpio"; drive-push-pull = <1>; }; - - pin_gpio2 { - maxim,active-fps-source = ; - }; - - pin_gpio3 { - maxim,active-fps-source = ; - }; }; - spmic-default-output-high { + gpio@0 { gpio-hog; output-high; gpios = <2 GPIO_ACTIVE_HIGH>, @@ -1652,7 +1651,7 @@ regulator-max-microvolt = <3300000>; regulator-always-on; - gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -1666,7 +1665,7 @@ regulator-always-on; regulator-boot-on; - gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -1711,7 +1710,7 @@ regulator-max-microvolt = <5000000>; regulator-always-on; - gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index cdc331ac5a3e..bd78378248a6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -1354,11 +1354,11 @@ maxim,enable-active-discharge; maxim,enable-bias-control; maxim,enable-etr; - maxim,enable-gpio = <&max77620 5 0>; + maxim,enable-gpio = <&pmic 5 0>; maxim,externally-enable; }; - max77620: max77620@3c { + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; interrupts = ; @@ -1372,8 +1372,8 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; - max77620_default: pinmux@0 { - pin_gpio { + max77620_default: pinmux { + gpio0_1_2_7 { pins = "gpio0", "gpio1", "gpio2", "gpio7"; function = "gpio"; }; @@ -1383,7 +1383,7 @@ * sequence, So it must be sequenced up (automatically * set by OTP) and down properly. */ - pin_gpio3 { + gpio3 { pins = "gpio3"; function = "fps-out"; drive-open-drain = <1>; @@ -1392,13 +1392,13 @@ maxim,active-fps-power-down-slot = <2>; }; - pin_gpio5_6 { + gpio5_6 { pins = "gpio5", "gpio6"; function = "gpio"; drive-push-pull = <1>; }; - pin_32k { + gpio4 { pins = "gpio4"; function = "32k-out1"; }; -- cgit v1.2.3 From 862120bd9feb7fe5e35b9d7d6a0c09f4728041c9 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:50:17 +0200 Subject: arm64: tegra: Sort nodes by unit-address on Jetson Nano Move the usb@700d0000 node to the correct place in the device tree, ordered by unit-address. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 31c3f8b45c67..05f6143a2cad 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -553,14 +553,6 @@ vmmc-supply = <&vdd_3v3_sd>; }; - usb@700d0000 { - status = "okay"; - phys = <µ_b>; - phy-names = "usb2-0"; - avddio-usb-supply = <&vdd_3v3_sys>; - hvdd-usb-supply = <&vdd_1v8>; - }; - mmc@700b0400 { status = "okay"; bus-width = <4>; @@ -574,6 +566,14 @@ wakeup-source; }; + usb@700d0000 { + status = "okay"; + phys = <µ_b>; + phy-names = "usb2-0"; + avddio-usb-supply = <&vdd_3v3_sys>; + hvdd-usb-supply = <&vdd_1v8>; + }; + clk32k_in: clock@0 { compatible = "fixed-clock"; clock-frequency = <32768>; -- cgit v1.2.3 From 8b3aee8f08464baa359ae19d90ca3140a80fc23b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:51:37 +0200 Subject: arm64: tegra: Rename cbb@0 to bus@0 on Tegra194 The control backbone is a simple-bus and hence its device tree node should be named "bus@" according to the bindings. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 22 +++++++++++----------- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 10 +++++----- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +- 3 files changed, 17 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 6f2c0754c870..cefbd0000357 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -8,18 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - ethernet0 = "/cbb@0/ethernet@2490000"; - mmc0 = "/cbb@0/mmc@3460000"; - mmc1 = "/cbb@0/mmc@3400000"; + ethernet0 = "/bus@0/ethernet@2490000"; + mmc0 = "/bus@0/mmc@3460000"; + mmc1 = "/bus@0/mmc@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb@0/i2c@3160000"; - i2c2 = "/cbb@0/i2c@c240000"; - i2c3 = "/cbb@0/i2c@3180000"; - i2c4 = "/cbb@0/i2c@3190000"; - i2c5 = "/cbb@0/i2c@31c0000"; - i2c6 = "/cbb@0/i2c@c250000"; - i2c7 = "/cbb@0/i2c@31e0000"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; }; chosen { @@ -27,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb@0 { + bus@0 { ethernet@2490000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 0f9868b6fd6b..90b6ea5467fa 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -10,7 +10,7 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb@0 { + bus@0 { aconnect@2900000 { status = "okay"; @@ -93,10 +93,10 @@ usb@3610000 { status = "okay"; - phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, - <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, - <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3"; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 307f999edbf9..ea629dae6880 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -16,7 +16,7 @@ #size-cells = <2>; /* control backbone */ - cbb@0 { + bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From d19532e6d328c4db50bb3c738c626ea1f5f0db6f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Fri, 12 Jun 2020 10:52:50 +0200 Subject: arm64: tegra: Fix order of XUSB controller clocks This is purely to make the json-schema validation tools happy because they cannot deal with string arrays that may be in arbitrary order. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index c0efa199ac70..f4e0cc289b02 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -997,8 +997,8 @@ <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>, <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>, <&tegra_car TEGRA210_CLK_XUSB_SS>, - <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, <&tegra_car TEGRA210_CLK_PLL_U_480M>, @@ -1006,7 +1006,7 @@ <&tegra_car TEGRA210_CLK_PLL_E>; clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", "xusb_ss", - "xusb_ss_div2", "xusb_ss_src", + "xusb_ss_src", "xusb_ss_div2", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; resets = <&tegra_car 89>, <&tegra_car 156>, -- cgit v1.2.3 From 257c8047be44161882582054b391e8569fc8b5b2 Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 16 Jun 2020 18:41:33 -0700 Subject: arm64: tegra: jetson-tx1: Add camera supplies Jetson TX1 development board has a camera expansion connector which has 2V8, 1V8 and 1V2 supplies to power up the camera sensor on the supported camera modules. Camera module designed as per Jetson TX1 camera expansion connector may use these supplies for camera sensor avdd 2V8, digital core 1V8, and digital interface 1V2 voltages. These supplies are from fixed regulators on TX1 carrier board with enable control signals from I2C GPIO expanders. This patch adds these camera supplies to Jetson TX1 device tree to allow using these when a camera module is used. Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 38 ++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 83f74ff43fd4..e18e1a9a3011 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1323,6 +1323,14 @@ #gpio-cells = <2>; gpio-controller; }; + + exp2: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + + #gpio-cells = <2>; + gpio-controller; + }; }; /* HDMI DDC */ @@ -1674,4 +1682,34 @@ enable-active-high; vin-supply = <&vdd_5v0_sys>; }; + + vdd_cam_1v2: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&exp2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_cam_2v8: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&exp1 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_cam_1v8: regulator@13 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&exp2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; }; -- cgit v1.2.3 From ffcb6cf1ff450bede23c0336ad3a0c21b555d4af Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 16 Jun 2020 18:41:34 -0700 Subject: arm64: tegra: Enable Tegra VI CSI support for Jetson Nano This patch enables VI and CSI in device tree for Jetson Nano. Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 05f6143a2cad..9b6346917ea9 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -64,6 +64,16 @@ status = "okay"; }; + vi@54080000 { + status = "okay"; + + avdd-dsi-csi-supply = <&vdd_sys_1v2>; + + csi@838 { + status = "okay"; + }; + }; + sor@54540000 { status = "okay"; -- cgit v1.2.3 From 8a565952aa6624eeeeaecca401ea2d45f140aa1b Mon Sep 17 00:00:00 2001 From: Vidya Sagar Date: Mon, 6 Jul 2020 22:44:54 +0530 Subject: arm64: tegra: Re-order PCIe aperture mappings Re-order Tegra194's PCIe aperture mappings to have IO window moved to 64-bit aperture and have the entire 32-bit aperture used for accessing the configuration space. This makes it to use the entire 32MB of the 32-bit aperture for ECAM purpose while booting through ACPI. Signed-off-by: Vidya Sagar Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 36 ++++++++++++++++---------------- 1 file changed, 18 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index ea629dae6880..f88e6d1664ac 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1438,9 +1438,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ - <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; @@ -1488,9 +1488,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ - <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; @@ -1538,9 +1538,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768MB) */ - <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; @@ -1588,9 +1588,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ - <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; @@ -1638,9 +1638,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ - <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; @@ -1692,9 +1692,9 @@ bus-range = <0x0 0xff>; - ranges = <0x01000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000>, /* downstream I/O (1MB) */ - <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13GB) */ - <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; -- cgit v1.2.3 From 3f9efbbe57bc6e999f6f4d389da289f2733f0261 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Mon, 13 Jul 2020 17:17:01 +0100 Subject: arm64: tegra: Add support for Jetson Xavier NX Add the device-tree source files for the Tegra194 Jetson Xavier NX Developer Kit. The Xavier NX Developer Kit consists of a small form factor system-on-module (SOM) board (part number p3668-0000) and a carrier board (part number p3509-0000). The Xavier NX Developer Kit SOM features a micro-SD card slot, however, there is also a variant of the SOM available that features a 16GB eMMC. Given that the carrier board can be used with the different SOM variants, that have different part numbers, both the compatible string and file name of the device-tree source file for the Developer Kit is a concatenation of the SOM and carrier board part numbers. Based on some initial work by Thierry Reding . Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/Makefile | 1 + .../dts/nvidia/tegra194-p3509-0000+p3668-0000.dts | 331 +++++++++++++++++++++ .../arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi | 290 ++++++++++++++++++ 3 files changed, 622 insertions(+) create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index bcd018c3162b..2273fc5db19c 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts new file mode 100644 index 000000000000..c1c589805d6b --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include + +#include "tegra194-p3668-0000.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX Developer Kit"; + compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194"; + + bus@0 { + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + + ddc: i2c@3190000 { + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "jetson-xavier-nx-hda"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-1 { + status = "okay"; + }; + + usb2-2 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-2 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-1", "usb2-2", "usb3-2"; + }; + + pwm@32d0000 { + status = "okay"; + }; + + host1x@13e00000 { + display-hub@15200000 { + status = "okay"; + }; + + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* HDMI */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) + GPIO_ACTIVE_LOW>; + }; + }; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_11>; + phy-names = "p2u-0"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie_ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm6 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + }; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) + GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + vdd_5v0_sys: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_ao: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_hdmi: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi new file mode 100644 index 000000000000..10cb836aea7e --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include + +/ { + model = "NVIDIA Jetson Xavier NX"; + compatible = "nvidia,p3668-0000", "nvidia,tegra194"; + + aliases { + ethernet0 = "/bus@0/ethernet@2490000"; + i2c0 = "/bpmp/i2c"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + rtc0 = "/bpmp/i2c/pmic@3c"; + rtc1 = "/bus@0/rtc@c2a0000"; + serial0 = &tcu; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = ; + #phy-cells = <0>; + }; + }; + }; + + memory-controller@2c00000 { + status = "okay"; + }; + + serial@c280000 { + status = "okay"; + }; + + /* SDMMC1 (SD/MMC) */ + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <&vdd_3v3_sd>; + }; + + padctl@3520000 { + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + ports { + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = ; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = ; + }; + + fps2 { + maxim,fps-event-source = ; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + vdd_1v0: sd0 { + regulator-name = "VDDIO_SYS_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8hs: sd1 { + regulator-name = "VDDIO_SYS_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDDIO_SYS_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ao: sd3 { + regulator-name = "VDDIO_AO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_usb_3v3: ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "AVDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; + + vdd_3v3_sd: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; +}; -- cgit v1.2.3 From 579db6e5d9b8cae1094a67809fb02ddede28ba09 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 12 Jul 2020 11:25:05 +0100 Subject: arm64: tegra: Enable DFLL support on Jetson Nano Populate the DFLL node and corresponding PWM pin nodes in order to enable CPUFREQ support on the Jetson Nano platform. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9b6346917ea9..2282ea1c6279 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -111,6 +111,22 @@ status = "okay"; }; + pinmux@700008d4 { + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; + + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = ; + }; + }; + }; + /* debug port */ serial@70006000 { status = "okay"; @@ -584,6 +600,27 @@ hvdd-usb-supply = <&vdd_1v8>; }; + clock@70110000 { + status = "okay"; + + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,sample-rate = <25000>; + + nvidia,pwm-min-microvolts = <708000>; + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; + }; + clk32k_in: clock@0 { compatible = "fixed-clock"; clock-frequency = <32768>; -- cgit v1.2.3 From 33c53dbdc4be66570ca0f00431b431608997048e Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Sun, 12 Jul 2020 11:25:06 +0100 Subject: arm64: tegra: Populate VBUS for USB3 on Jetson TX2 The VBUS for USB3 connector on the Jetson TX2 is connected to the vdd_usb1 supply and although this is populated for the USB2 port on the USB3 connector it is not populated for the USB3 port and causes the following warning to be seen on boot ... usb3-0: supply vbus not found, using dummy regulator Fix this by also adding the VBUS supply to the USB3 port. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index a70fd4e86840..802b8c52489a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -194,6 +194,7 @@ usb3-0 { nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_usb1>; status = "okay"; }; }; -- cgit v1.2.3 From 1b2a0c36db56b9ff436a85408573c03f17608c68 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 14 Jul 2020 11:35:48 +0200 Subject: arm64: tegra: Remove spurious tabs Remove tabs in places where they don't belong (i.e. where a single space is sufficient). Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index f88e6d1664ac..259e40469908 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1422,8 +1422,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_1>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1472,8 +1472,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_2>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1522,8 +1522,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_3>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1572,8 +1572,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_4>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1622,8 +1622,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_0>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1676,8 +1676,8 @@ <&bpmp TEGRA194_RESET_PEX1_CORE_5>; reset-names = "apb", "core"; - interrupts = , /* controller interrupt */ - ; /* MSI interrupt */ + interrupts = , /* controller interrupt */ + ; /* MSI interrupt */ interrupt-names = "intr", "msi"; nvidia,bpmp = <&bpmp 5>; -- cgit v1.2.3 From 7d6dbb7b99f192bb1d7cfbd53f3aff22f6c4e792 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 14 Jul 2020 12:00:09 +0200 Subject: arm64: tegra: Sort aliases alphabetically Most device tree files already do this, so update the remaining ones for consistency. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi | 6 +++--- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 654c55ed048b..53d92fdd7f06 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -9,9 +9,6 @@ aliases { ethernet0 = "/ethernet@2490000"; - mmc0 = "/mmc@3460000"; - mmc1 = "/mmc@3400000"; - serial0 = &uarta; i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; i2c2 = "/i2c@c240000"; @@ -20,6 +17,9 @@ i2c5 = "/i2c@31c0000"; i2c6 = "/i2c@c250000"; i2c7 = "/i2c@31e0000"; + mmc0 = "/mmc@3460000"; + mmc1 = "/mmc@3400000"; + serial0 = &uarta; }; chosen { diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index cefbd0000357..4c005b811233 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -9,9 +9,6 @@ aliases { ethernet0 = "/bus@0/ethernet@2490000"; - mmc0 = "/bus@0/mmc@3460000"; - mmc1 = "/bus@0/mmc@3400000"; - serial0 = &tcu; i2c0 = "/bpmp/i2c"; i2c1 = "/bus@0/i2c@3160000"; i2c2 = "/bus@0/i2c@c240000"; @@ -20,6 +17,9 @@ i2c5 = "/bus@0/i2c@31c0000"; i2c6 = "/bus@0/i2c@c250000"; i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + mmc1 = "/bus@0/mmc@3400000"; + serial0 = &tcu; }; chosen { -- cgit v1.2.3 From cb26dc7ba8e77cd0af543d76679b5d5d2c819179 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:46:05 +0200 Subject: ARM: tegra: Add i2c-bus subnode for DPAUX controllers The DPAUX controller device tree bindings require the bus to have an i2c-bus subnode to distinguish between I2C clients and pinmux groups. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 782c00b8b355..64f488ba1e72 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -178,6 +178,11 @@ resets = <&tegra_car 181>; reset-names = "dpaux"; status = "disabled"; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; -- cgit v1.2.3 From 7ee1e9feff08211c8e566a6ffac4e1af4ee529bf Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:47:43 +0200 Subject: ARM: tegra: Add missing DSI controller on Tegra30 Tegra30 has a DSI controller, although it is never used on any of the devices supported by the upstream Linux kernel. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 325b593f394e..aeae8c092d41 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -264,6 +264,17 @@ reset-names = "dsi"; status = "disabled"; }; + + dsi@54400000 { + compatible = "nvidia,tegra30-dsi"; + reg = <0x54400000 0x00040000>; + clocks = <&tegra_car TEGRA30_CLK_DSIB>, + <&tegra_car TEGRA30_CLK_PLL_D_OUT0>; + clock-names = "dsi", "parent"; + resets = <&tegra_car 84>; + reset-names = "dsi"; + status = "disabled"; + }; }; timer@50040600 { -- cgit v1.2.3 From bd26938b409f50553b7c8d65bf2cc297d731d55f Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 25 Jun 2020 13:38:59 +0200 Subject: ARM: tegra: Add HDMI supplies on Nyan boards The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order to operate correctly. Make sure to specify them for Nyan boards. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-nyan.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 06e133ad9932..5f71add38dfe 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -48,6 +48,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; + vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; -- cgit v1.2.3 From 997a3b73c5a1a2093b9ccdbdea7630a8702388fa Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:48:44 +0200 Subject: arm64: tegra: Add i2c-bus subnode for DPAUX controllers The DPAUX controller device tree bindings require the bus to have an i2c-bus subnode to distinguish between I2C clients and pinmux groups. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index fefaf392ce56..e40281510c0c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -161,6 +161,11 @@ resets = <&tegra_car 181>; reset-names = "dpaux"; status = "disabled"; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; -- cgit v1.2.3 From e989992a41f9fd0d9bfe6f939d548584372f8046 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:49:10 +0200 Subject: arm64: tegra: Fix compatible string for DPAUX on Tegra210 The Tegra210 DPAUX controller is not compatible with that found on Tegra124, so it must have a separate compatible string. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index f4e0cc289b02..87fe03648182 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -325,7 +325,7 @@ }; dpaux: dpaux@545c0000 { - compatible = "nvidia,tegra124-dpaux"; + compatible = "nvidia,tegra210-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_DPAUX>, -- cgit v1.2.3 From 97ace1b41e4a4aa3ece129af93d3ee41860ac763 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:50:17 +0200 Subject: arm64: tegra: Add clocks and resets for ISP on Tegra210 The ISP blocks take a clock and a reset as inputs, so add those to the device tree nodes. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 87fe03648182..2fc4c1fb6149 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -361,6 +361,9 @@ compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54600000 0x0 0x00040000>; interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_ISPA>; + resets = <&tegra_car 23>; + reset-names = "isp"; status = "disabled"; }; @@ -368,6 +371,9 @@ compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54680000 0x0 0x00040000>; interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_ISPB>; + resets = <&tegra_car 3>; + reset-names = "isp"; status = "disabled"; }; -- cgit v1.2.3 From 6bab7cd0350c3749911859dc3519e22bd31db6df Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 25 Jun 2020 13:17:09 -0700 Subject: arm64: dts: qcom: Fix WiFi supplies on sc7180-idp The WiFi supplies that were added recently can't have done anything useful because they were missing the "-supply" suffix. Booting without the "-supply" suffix would give these messages: ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found, using dummy regulator ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found, using dummy regulator ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found, using dummy regulator ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found, using dummy regulator Let's add the "-supply" suffix. Tested-by: Rakesh Pillai Reviewed-by: Rakesh Pillai Fixes: 1e7594a38f37 ("arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20200625131658.REPOST.1.I32960cd32bb84d6db4127c906d7e371fa29caebf@changeid Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 141de49a1b7d..d996a353046b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -391,10 +391,10 @@ &wifi { status = "okay"; - vdd-0.8-cx-mx = <&vreg_l9a_0p6>; - vdd-1.8-xo = <&vreg_l1c_1p8>; - vdd-1.3-rfa = <&vreg_l2c_1p3>; - vdd-3.3-ch0 = <&vreg_l10c_3p3>; + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; wifi-firmware { iommus = <&apps_smmu 0xc2 0x1>; }; -- cgit v1.2.3 From 7d484566087c0a969f9260f580bc6b42ea64c02c Mon Sep 17 00:00:00 2001 From: Rakesh Pillai Date: Mon, 13 Jul 2020 10:16:26 +0530 Subject: arm64: dts: qcom: sc7180: Add missing properties for Wifi node The wlan firmware memory is statically mapped in the Trusted Firmware, hence the wlan driver does not need to map/unmap this region dynamically. Hence add the property to indicate the wlan driver to not map/unamp the firmware memory region dynamically. Also add the chain1 voltage supply for wlan. Reviewed-by: Douglas Anderson Signed-off-by: Rakesh Pillai Link: https://lore.kernel.org/r/1594615586-17055-1-git-send-email-pillair@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index d996a353046b..860fc4658b8b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -21,6 +21,7 @@ bluetooth0 = &bluetooth; hsuart0 = &uart3; serial0 = &uart8; + wifi0 = &wifi; }; chosen { @@ -391,10 +392,12 @@ &wifi { status = "okay"; + qcom,msa-fixed-perm; vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; vdd-1.8-xo-supply = <&vreg_l1c_1p8>; vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; wifi-firmware { iommus = <&apps_smmu 0xc2 0x1>; }; -- cgit v1.2.3 From dff0f49cda8492374ffd33389e4334c33b903e89 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 22 Jun 2020 00:59:56 -0700 Subject: arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon Now that we don't need the intermediate syscon to represent the TCSR mutexes, update the dts to describe the TCSR mutex directly under /soc. Reviewed-by: Dmitry Baryshkov Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20200622075956.171058-5-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 6fa2c24f5d74..551a3cef356e 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -189,12 +189,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -1047,9 +1041,10 @@ }; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; }; slpi: remoteproc@5c00000 { -- cgit v1.2.3 From f7f394f01da56272c760cb495489b1ec695d6ed4 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 22 Jun 2020 17:17:48 +0200 Subject: arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file It is helpful to be able to see all hardware components in one part of the device tree, without having to scroll over the large amount of regulator/pinctrl nodes. Keep those separated at the end of the file to make navigation a bit easier. This also makes it consistent with the order used in apq8016-sbc.dtsi. Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200622151751.408995-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 50 +++---- .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 158 ++++++++++----------- 2 files changed, 104 insertions(+), 104 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index d5230cb76eb1..ed105e06c3fc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -108,31 +108,6 @@ }; }; -&msmgpio { - gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107"; - }; - pinconf { - pins = "gpio107"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb_vbus_default: usb-vbus-default { - pinmux { - function = "gpio"; - pins = "gpio62"; - }; - pinconf { - pins = "gpio62"; - bias-pull-up; - }; - }; -}; - &spmi_bus { pm8916@0 { pon@800 { @@ -258,3 +233,28 @@ regulator-max-microvolt = <2700000>; }; }; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_vbus_default: usb-vbus-default { + pinmux { + function = "gpio"; + pins = "gpio62"; + }; + pinconf { + pins = "gpio62"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index ea52adf07a4b..b20c1013612f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -167,77 +167,14 @@ }; }; -&msmgpio { - gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107", "gpio109"; - }; - pinconf { - pins = "gpio107", "gpio109"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - gpio_hall_sensor_default: gpio-hall-sensor-default { - pinmux { - function = "gpio"; - pins = "gpio52"; - }; - pinconf { - pins = "gpio52"; - drive-strength = <2>; - bias-disable; - }; - }; - - muic_int_default: muic-int-default { - pinmux { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - }; - }; - - tsp_en_default: tsp-en-default { - pinmux { - function = "gpio"; - pins = "gpio73"; - }; - pinconf { - pins = "gpio73"; - drive-strength = <2>; - bias-disable; - }; - }; - - pmx-mdss { - mdss_default: mdss-default { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <8>; - bias-disable; - }; - }; - - mdss_sleep: mdss-sleep { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <2>; - bias-pull-down; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = ; }; }; }; @@ -356,15 +293,78 @@ }; }; -&spmi_bus { - pm8916@0 { - pon@800 { - volume-down { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - linux,code = ; +&msmgpio { + gpio_keys_default: gpio-keys-default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + + mdss { + mdss_default: mdss-default { + pinmux { + function = "gpio"; + pins = "gpio25"; + }; + pinconf { + pins = "gpio25"; + drive-strength = <8>; + bias-disable; + }; + }; + + mdss_sleep: mdss-sleep { + pinmux { + function = "gpio"; + pins = "gpio25"; }; + pinconf { + pins = "gpio25"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + muic_int_default: muic-int-default { + pinmux { + function = "gpio"; + pins = "gpio12"; + }; + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + }; + }; + + tsp_en_default: tsp-en-default { + pinmux { + function = "gpio"; + pins = "gpio73"; + }; + pinconf { + pins = "gpio73"; + drive-strength = <2>; + bias-disable; }; }; }; -- cgit v1.2.3 From 6554a295042f714cef20cce67803ec71f1eb913a Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 22 Jun 2020 17:17:49 +0200 Subject: arm64: dts: qcom: msm8916: Simplify pinctrl configuration So far we have been separating pinctrl entries into pinmux/pinconf. It turns out it is also possible to combine them: The advantage is that the device tree is overall more concise because the "pins" to configure just need to be specified once, not separately for pinmux/pinconf. Using the simpler form only for new entries would be rather confusing. This commit makes all MSM8916 device trees use the simplfied form. Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200622151751.408995-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 171 ++-- .../boot/dts/qcom/msm8916-longcheer-l8150.dts | 26 +- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 861 ++++++++------------- .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 85 +- .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 14 +- .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 14 +- 6 files changed, 426 insertions(+), 745 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 364014c96632..6fff96a158e9 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -781,133 +781,102 @@ &msmgpio { msmgpio_leds: msmgpio-leds { - pinconf { - pins = "gpio21", "gpio120"; - function = "gpio"; - output-low; - }; + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; }; usb_id_default: usb-id-default { - pinmux { - function = "gpio"; - pins = "gpio121"; - }; + pins = "gpio121"; + function = "gpio"; - pinconf { - pins = "gpio121"; - drive-strength = <8>; - input-enable; - bias-pull-up; - }; + drive-strength = <8>; + input-enable; + bias-pull-up; }; adv7533_int_active: adv533-int-active { - pinmux { - function = "gpio"; - pins = "gpio31"; - }; - pinconf { - pins = "gpio31"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; }; adv7533_int_suspend: adv7533-int-suspend { - pinmux { - function = "gpio"; - pins = "gpio31"; - }; - pinconf { - pins = "gpio31"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; adv7533_switch_active: adv7533-switch-active { - pinmux { - function = "gpio"; - pins = "gpio32"; - }; - pinconf { - pins = "gpio32"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; }; adv7533_switch_suspend: adv7533-switch-suspend { - pinmux { - function = "gpio"; - pins = "gpio32"; - }; - pinconf { - pins = "gpio32"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; msm_key_volp_n_default: msm-key-volp-n-default { - pinmux { - function = "gpio"; - pins = "gpio107"; - }; - pinconf { - pins = "gpio107"; - drive-strength = <8>; - input-enable; - bias-pull-up; - }; + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; }; }; &pm8916_gpios { usb_hub_reset_pm: usb-hub-reset-pm { - pinconf { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - input-disable; - output-high; - }; + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; }; usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pinconf { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - }; + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; }; usb_sw_sel_pm: usb-sw-sel-pm { - pinconf { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - power-source = ; - input-disable; - output-high; - }; + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-high; }; usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pinconf { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - power-source = ; - input-disable; - output-low; - }; + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = ; + input-disable; + output-low; }; pm8916_gpios_leds: pm8916-gpios-leds { - pinconf { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - }; + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; }; }; @@ -916,19 +885,17 @@ pinctrl-0 = <&ls_exp_gpio_f>; ls_exp_gpio_f: pm8916-mpp4 { - pinconf { - pins = "mpp4"; - function = "digital"; - output-low; - power-source = ; // 1.8V - }; + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = ; // 1.8V }; pm8916_mpps_leds: pm8916-mpps-leds { - pinconf { - pins = "mpp2", "mpp3"; - function = "digital"; - output-low; - }; + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index ed105e06c3fc..9f2c8e94fd26 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -236,25 +236,17 @@ &msmgpio { gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107"; - }; - pinconf { - pins = "gpio107"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; }; usb_vbus_default: usb-vbus-default { - pinmux { - function = "gpio"; - pins = "gpio62"; - }; - pinconf { - pins = "gpio62"; - bias-pull-up; - }; + pins = "gpio62"; + function = "gpio"; + + bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 591f48a57535..e1d4f8df7e79 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -6,74 +6,49 @@ &msmgpio { blsp1_uart1_default: blsp1-uart1-default { - pinmux { - function = "blsp_uart1"; - // TX, RX, CTS_N, RTS_N - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <16>; - bias-disable; - }; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + + drive-strength = <16>; + bias-disable; }; blsp1_uart1_sleep: blsp1-uart1-sleep { - pinmux { - function = "gpio"; - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; blsp1_uart2_default: blsp1-uart2-default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + + drive-strength = <16>; + bias-disable; }; blsp1_uart2_sleep: blsp1-uart2-sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi1_default: spi1-default { - pinmux { - function = "blsp_spi1"; - pins = "gpio0", "gpio1", "gpio3"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio2"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio3"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -81,33 +56,24 @@ }; spi1_sleep: spi1-sleep { - pinmux { - function = "gpio"; - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi2_default: spi2-default { - pinmux { - function = "blsp_spi2"; - pins = "gpio4", "gpio5", "gpio7"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio6"; - }; - pinconf { - pins = "gpio4", "gpio5", "gpio7"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -115,33 +81,24 @@ }; spi2_sleep: spi2-sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi3_default: spi3-default { - pinmux { - function = "blsp_spi3"; - pins = "gpio8", "gpio9", "gpio11"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio10"; - }; - pinconf { - pins = "gpio8", "gpio9", "gpio11"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -149,33 +106,24 @@ }; spi3_sleep: spi3-sleep { - pinmux { - function = "gpio"; - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - }; - pinconf { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi4_default: spi4-default { - pinmux { - function = "blsp_spi4"; - pins = "gpio12", "gpio13", "gpio15"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio14"; - }; - pinconf { - pins = "gpio12", "gpio13", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -183,33 +131,24 @@ }; spi4_sleep: spi4-sleep { - pinmux { - function = "gpio"; - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi5_default: spi5-default { - pinmux { - function = "blsp_spi5"; - pins = "gpio16", "gpio17", "gpio19"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio18"; - }; - pinconf { - pins = "gpio16", "gpio17", "gpio19"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -217,33 +156,24 @@ }; spi5_sleep: spi5-sleep { - pinmux { - function = "gpio"; - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi6_default: spi6-default { - pinmux { - function = "blsp_spi6"; - pins = "gpio20", "gpio21", "gpio23"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio22"; - }; - pinconf { - pins = "gpio20", "gpio21", "gpio23"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -251,466 +181,315 @@ }; spi6_sleep: spi6-sleep { - pinmux { - function = "gpio"; - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; i2c1_default: i2c1-default { - pinmux { - function = "blsp_i2c1"; - pins = "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; }; i2c1_sleep: i2c1-sleep { - pinmux { - function = "gpio"; - pins = "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c2_default: i2c2-default { - pinmux { - function = "blsp_i2c2"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <16>; + bias-disable; }; i2c2_sleep: i2c2-sleep { - pinmux { - function = "gpio"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c4_default: i2c4-default { - pinmux { - function = "blsp_i2c4"; - pins = "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio14", "gpio15"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + + drive-strength = <16>; + bias-disable; }; i2c4_sleep: i2c4-sleep { - pinmux { - function = "gpio"; - pins = "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio14", "gpio15"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c5_default: i2c5-default { - pinmux { - function = "blsp_i2c5"; - pins = "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio18", "gpio19"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + + drive-strength = <2>; + bias-disable; }; i2c5_sleep: i2c5-sleep { - pinmux { - function = "gpio"; - pins = "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio18", "gpio19"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c6_default: i2c6-default { - pinmux { - function = "blsp_i2c6"; - pins = "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio22", "gpio23"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + + drive-strength = <16>; + bias-disable; }; i2c6_sleep: i2c6-sleep { - pinmux { - function = "gpio"; - pins = "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio22", "gpio23"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; pmx-sdc1-clk { sdc1_clk_on: clk-on { - pinmux { - pins = "sdc1_clk"; - }; - pinconf { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <16>; }; sdc1_clk_off: clk-off { - pinmux { - pins = "sdc1_clk"; - }; - pinconf { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <2>; }; }; pmx-sdc1-cmd { sdc1_cmd_on: cmd-on { - pinmux { - pins = "sdc1_cmd"; - }; - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <10>; }; sdc1_cmd_off: cmd-off { - pinmux { - pins = "sdc1_cmd"; - }; - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc1-data { sdc1_data_on: data-on { - pinmux { - pins = "sdc1_data"; - }; - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <10>; }; sdc1_data_off: data-off { - pinmux { - pins = "sdc1_data"; - }; - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-clk { sdc2_clk_on: clk-on { - pinmux { - pins = "sdc2_clk"; - }; - pinconf { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <16>; }; sdc2_clk_off: clk-off { - pinmux { - pins = "sdc2_clk"; - }; - pinconf { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <2>; }; }; pmx-sdc2-cmd { sdc2_cmd_on: cmd-on { - pinmux { - pins = "sdc2_cmd"; - }; - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <10>; }; sdc2_cmd_off: cmd-off { - pinmux { - pins = "sdc2_cmd"; - }; - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-data { sdc2_data_on: data-on { - pinmux { - pins = "sdc2_data"; - }; - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <10>; }; sdc2_data_off: data-off { - pinmux { - pins = "sdc2_data"; - }; - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-cd-pin { sdc2_cd_on: cd-on { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; }; sdc2_cd_off: cd-off { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; cdc-pdm-lines { cdc_pdm_lines_act: pdm-lines-on { - pinmux { - function = "cdc_pdm0"; - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - }; - pinconf { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - drive-strength = <8>; - bias-disable; - }; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <8>; + bias-disable; }; cdc_pdm_lines_sus: pdm-lines-off { - pinmux { - function = "cdc_pdm0"; - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - }; - pinconf { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <2>; + bias-pull-down; }; }; ext-pri-tlmm-lines { ext_pri_tlmm_lines_act: ext-pa-on { - pinmux { - function = "pri_mi2s"; - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - }; - pinconf { - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - drive-strength = <8>; - bias-disable; - }; - }; + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; ext_pri_tlmm_lines_sus: ext-pa-off { - pinmux { - function = "pri_mi2s"; - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - }; - pinconf { - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; ext-pri-ws-line { ext_pri_ws_act: ext-pa-on { - pinmux { - function = "pri_mi2s_ws"; - pins = "gpio110"; - }; - pinconf { - pins = "gpio110"; - drive-strength = <8>; - bias-disable; - }; - }; + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; ext_pri_ws_sus: ext-pa-off { - pinmux { - function = "pri_mi2s_ws"; - pins = "gpio110"; - }; - pinconf { - pins = "gpio110"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <2>; + bias-disable; }; }; ext-mclk-tlmm-lines { ext_mclk_tlmm_lines_act: mclk-lines-on { - pinmux { - function = "pri_mi2s"; - pins = "gpio116"; - }; - pinconf { - pins = "gpio116"; - drive-strength = <8>; - bias-disable; - }; + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; }; ext_mclk_tlmm_lines_sus: mclk-lines-off { - pinmux { - function = "pri_mi2s"; - pins = "gpio116"; - }; - pinconf { - pins = "gpio116"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; /* secondary Mi2S */ ext-sec-tlmm-lines { ext_sec_tlmm_lines_act: tlmm-lines-on { - pinmux { - function = "sec_mi2s"; - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - }; - pinconf { - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - drive-strength = <8>; - bias-disable; - }; + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <8>; + bias-disable; }; ext_sec_tlmm_lines_sus: tlmm-lines-off { - pinmux { - function = "sec_mi2s"; - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - }; - pinconf { - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; cdc-dmic-lines { cdc_dmic_lines_act: dmic-lines-on { - pinmux-dmic0-clk { - function = "dmic0_clk"; + clk { pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <8>; }; - pinmux-dmic0-data { - function = "dmic0_data"; + data { pins = "gpio1"; - }; - pinconf { - pins = "gpio0", "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; }; }; cdc_dmic_lines_sus: dmic-lines-off { - pinmux-dmic0-clk { - function = "dmic0_clk"; + clk { pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <2>; + bias-disable; }; - pinmux-dmic0-data { - function = "dmic0_data"; + data { pins = "gpio1"; - }; - pinconf { - pins = "gpio0", "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; bias-disable; }; @@ -718,88 +497,64 @@ }; wcnss_pin_a: wcnss-active { - pinmux { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - }; - pinconf { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <6>; - bias-pull-up; - }; + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + + drive-strength = <6>; + bias-pull-up; }; cci0_default: cci0-default { - pinmux { - function = "cci_i2c"; - pins = "gpio29", "gpio30"; - }; - pinconf { - pins = "gpio29", "gpio30"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + + drive-strength = <16>; + bias-disable; }; camera_front_default: camera-front-default { - pinmux-pwdn { - function = "gpio"; - pins = "gpio33"; - }; - pinconf-pwdn { + pwdn { pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-rst { - function = "gpio"; - pins = "gpio28"; - }; - pinconf-rst { + rst { pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-mclk1 { - function = "cam_mclk1"; - pins = "gpio27"; - }; - pinconf-mclk1 { + mclk1 { pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; bias-disable; }; }; camera_rear_default: camera-rear-default { - pinmux-pwdn { - function = "gpio"; - pins = "gpio34"; - }; - pinconf-pwdn { + pwdn { pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-rst { - function = "gpio"; - pins = "gpio35"; - }; - pinconf-rst { + rst { pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-mclk0 { - function = "cam_mclk0"; - pins = "gpio26"; - }; - pinconf-mclk0 { + mclk0 { pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; bias-disable; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index b20c1013612f..58485d055241 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -295,76 +295,51 @@ &msmgpio { gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107", "gpio109"; - }; - pinconf { - pins = "gpio107", "gpio109"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; }; gpio_hall_sensor_default: gpio-hall-sensor-default { - pinmux { - function = "gpio"; - pins = "gpio52"; - }; - pinconf { - pins = "gpio52"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; mdss { mdss_default: mdss-default { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <8>; - bias-disable; - }; - }; + pins = "gpio25"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; mdss_sleep: mdss-sleep { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; }; muic_int_default: muic-int-default { - pinmux { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; tsp_en_default: tsp-en-default { - pinmux { - function = "gpio"; - pins = "gpio73"; - }; - pinconf { - pins = "gpio73"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index b46c87289033..33160a3687ce 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -51,14 +51,10 @@ &msmgpio { panel_vdd3_default: panel-vdd3-default { - pinmux { - function = "gpio"; - pins = "gpio9"; - }; - pinconf { - pins = "gpio9"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio9"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index a555db8f6b34..e4b6fa18ca25 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -38,14 +38,10 @@ &msmgpio { ts_int_default: ts-int-default { - pinmux { - function = "gpio"; - pins = "gpio13"; - }; - pinconf { - pins = "gpio13"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; -- cgit v1.2.3 From 4a1f08cb58e522ef6c94a0b0dde4b483e1bbe1cd Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 22 Jun 2020 17:17:50 +0200 Subject: arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c Commit c240f29e75e6 ("arm64: dts: set the default i2c pin drive strength to 16mA") changed the default drive-strength for I2C pins in msm8916-pins.dtsi to the maximum possible (16 mA). While this makes sense for apq8016-sbc (DB410c) where you can connect an arbitrary amount of I2C devices with level shifters etc, there is no need to use a higher drive strength for other MSM8916 devices. The minimum drive strength (2 mA) seems to be totally sufficient to have everything work there. With the short pinctrl nodes introduced earlier we can easily override the drive-strength only for apq8016-sbc now. Use that and change the default back to 2 mA. i2c1_default/i2c5_default are already using 2 mA because they were added separately later and are not used in apq8016-sbc. Cc: Srinivas Kandagatla Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200622151751.408995-4-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 16 ++++++++++++++++ arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 6 +++--- 2 files changed, 19 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 6fff96a158e9..194343510dcb 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -779,6 +779,22 @@ }; }; +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + &msmgpio { msmgpio_leds: msmgpio-leds { pins = "gpio21", "gpio120"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index e1d4f8df7e79..4dc437f13fa5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -208,7 +208,7 @@ pins = "gpio6", "gpio7"; function = "blsp_i2c2"; - drive-strength = <16>; + drive-strength = <2>; bias-disable; }; @@ -224,7 +224,7 @@ pins = "gpio14", "gpio15"; function = "blsp_i2c4"; - drive-strength = <16>; + drive-strength = <2>; bias-disable; }; @@ -256,7 +256,7 @@ pins = "gpio22", "gpio23"; function = "blsp_i2c6"; - drive-strength = <16>; + drive-strength = <2>; bias-disable; }; -- cgit v1.2.3 From 079f81acf10fcdadf2ddb4bf9755509b8bdc3504 Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 22 Jun 2020 17:17:51 +0200 Subject: arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer A3U/A5U both use a Bosch BMC150 accelerometer/magnetometer combo. The chip provides two separate I2C devices for the accelerometer and magnetometer that are already supported by the bmc150-accel and bmc150-magn driver. The only difference between A3U/A5U is the way the sensor is mounted on the mainboard - set the mount-matrix in the device-specific device tree part to handle that difference. Co-developed-by: Michael Srba Signed-off-by: Michael Srba Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20200622151751.408995-5-stephan@gerhold.net Signed-off-by: Bjorn Andersson --- .../dts/qcom/msm8916-samsung-a2015-common.dtsi | 27 ++++++++++++++++++++++ .../boot/dts/qcom/msm8916-samsung-a3u-eur.dts | 6 +++++ .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 6 +++++ 3 files changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 58485d055241..a0c00d9d62c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -167,6 +167,25 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + accelerometer: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + }; +}; + &spmi_bus { pm8916@0 { pon@800 { @@ -294,6 +313,14 @@ }; &msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107", "gpio109"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index 33160a3687ce..410c7d199f96 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -22,6 +22,12 @@ }; }; +&accelerometer { + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; +}; + &dsi0 { panel@0 { reg = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts index e4b6fa18ca25..e39c04d977c2 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -9,6 +9,12 @@ compatible = "samsung,a5u-eur", "qcom,msm8916"; }; +&accelerometer { + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; +}; + &blsp_i2c5 { status = "okay"; -- cgit v1.2.3 From d344234abde938ae1062edb6c05852b0bafb4a03 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Sat, 4 Jul 2020 17:58:55 +0200 Subject: ARM: dts: gose: Fix ports node name for adv7180 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When adding the adv7180 device node the ports node was misspelled as port, fix this. Fixes: 8cae359049a88b75 ("ARM: dts: gose: add composite video input") Signed-off-by: Niklas Söderlund Link: https://lore.kernel.org/r/20200704155856.3037010-2-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793-gose.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 79baf06019f5..a378b54867bb 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -336,7 +336,7 @@ reg = <0x20>; remote = <&vin1>; - port { + ports { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 0acc7a639658e6681c216ec4e82d0f8aac71b8b1 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Sat, 4 Jul 2020 17:58:56 +0200 Subject: ARM: dts: renesas: Remove unused remote property from adv7180 nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The remote property is never read by the driver, remove it. Signed-off-by: Niklas Söderlund Link: https://lore.kernel.org/r/20200704155856.3037010-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7790-lager.dts | 1 - arch/arm/boot/dts/r8a7791-koelsch.dts | 1 - arch/arm/boot/dts/r8a7791-porter.dts | 1 - arch/arm/boot/dts/r8a7793-gose.dts | 1 - arch/arm/boot/dts/r8a7794-alt.dts | 1 - arch/arm/boot/dts/r8a7794-silk.dts | 1 - 6 files changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index bfe778c4c47b..09a152b91557 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -343,7 +343,6 @@ composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; - remote = <&vin1>; port { adv7180: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index fc74c6cd6def..f603cba5441f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -366,7 +366,6 @@ composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; - remote = <&vin1>; port { adv7180: endpoint { diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 114bf1c4199b..c6d563fb7ec7 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -162,7 +162,6 @@ composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; - remote = <&vin0>; port { adv7180: endpoint { diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index a378b54867bb..31fd3e9ae33e 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -334,7 +334,6 @@ composite-in@20 { compatible = "adi,adv7180cp"; reg = <0x20>; - remote = <&vin1>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 935935c1dbac..3f1cc5bbf329 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -167,7 +167,6 @@ composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; - remote = <&vin0>; port { adv7180: endpoint { diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index b8b0941f677c..677596f6c9c9 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -236,7 +236,6 @@ composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; - remote = <&vin0>; port { adv7180: endpoint { -- cgit v1.2.3 From 273f00a1ece8f5d7647a77e33f8548720bbc5344 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Jul 2020 17:14:00 +0200 Subject: arm64: dts: renesas: cat875: Drop superfluous phy-mode The PHY mode already defaults to RGMII in the RZ/G2E base SoC DTS file, so there is no need to specify the same value in board files. Fixes: 6b170cd3ed02949f ("arm64: dts: renesas: cat875: Add ethernet support") Signed-off-by: Geert Uytterhoeven Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20200706151400.23105-1-geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/cat875.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi index aaefc3ae56d5..33daa9570684 100644 --- a/arch/arm64/boot/dts/renesas/cat875.dtsi +++ b/arch/arm64/boot/dts/renesas/cat875.dtsi @@ -18,7 +18,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii"; status = "okay"; phy0: ethernet-phy@0 { -- cgit v1.2.3 From 8f208c28e1017cac20e0b2043231f5099b5f29c9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Jul 2020 17:40:15 +0200 Subject: arm64: dts: renesas: Restructure Makefile MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make the Makefile for building Renesas DTB files easier to read and maintain: - Get rid of line continuations, - Use a single entry per line, - Sort SoCs and boards alphabetically, - Separate SoCs by blank lines. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20200706154015.29257-1-geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/Makefile | 69 +++++++++++++++++++++++------------- 1 file changed, 45 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 21cc63469082..5f00f90a89bd 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,30 +1,51 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb \ - r8a774a1-hihope-rzg2m-rev2.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb \ - r8a774a1-hihope-rzg2m-rev2-ex.dtb -dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb \ - r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb \ - r8a774b1-hihope-rzg2n-rev2.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb \ - r8a774b1-hihope-rzg2n-rev2-ex.dtb -dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb \ - r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb -dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ - r8a774c0-ek874-idk-2121wr.dtb \ - r8a774c0-ek874-mipi-2.1.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb + +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb + +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb + dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb -dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb + dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb -dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb + +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb +dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb + +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb + dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb + dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb -- cgit v1.2.3 From 674b5102e3bbafcab49b211df06f2ff572d484da Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Mon, 29 Jun 2020 05:54:51 +0300 Subject: ARM: tegra: Add device-tree for Acer Iconia Tab A500 Add device-tree for Acer Iconia Tab A500, which is NVIDIA Tegra20-based tablet device. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 1438 +++++++++++++++++++++++ 2 files changed, 1439 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6a1cac0bfc7..8bdfa28f79ca 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1197,6 +1197,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \ dtb-$(CONFIG_ARCH_TANGO) += \ tango4-vantage-1172.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ + tegra20-acer-a500-picasso.dtb \ tegra20-harmony.dtb \ tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \ diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts new file mode 100644 index 000000000000..2d683c9a1a5d --- /dev/null +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -0,0 +1,1438 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include + +#include "tegra20.dtsi" +#include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" + +/ { + model = "Acer Iconia Tab A500"; + compatible = "acer,picasso", "nvidia,tegra20"; + + aliases { + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + serial0 = &uartd; /* Docking station */ + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + memory@0 { + reg = <0x00000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@2ffe0000 { + compatible = "ramoops"; + reg = <0x2ffe0000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + linux,cma@30000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x30000000 0x10000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + port@0 { + lcd_output: endpoint { + remote-endpoint = <&lvds_encoder_input>; + bus-width = <18>; + }; + }; + }; + }; + + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_5v0_sys>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) + GPIO_ACTIVE_HIGH>; + }; + }; + + pinmux@70000014 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "spia", + "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp", "lm1"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; + nvidia,function = "vi"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gmd { + nvidia,pins = "gmd"; + nvidia,function = "sflash"; + }; + gpu { + nvidia,pins = "gpu"; + nvidia,function = "pwm"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ldc", "lm0", "lpw1", + "lsdi", "lvp0"; + nvidia,function = "rsvd4"; + }; + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lpp", "lsc0", + "lsc1", "lsck", "lsda", "lspi", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk"; + nvidia,function = "sdio3"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxd { + nvidia,pins = "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", + "cdev1", "cdev2", "csus", "dap1", + "dap4", "dte", "dtf", "gma", "gmc", + "gme", "gpu", "gpu7", "gpv", "i2cp", + "irrx", "irtx", "pta", "rm", + "sdc", "sdd", "slxc", "slxd", "slxk", + "spdi", "spdo", "uac", "uad", "uda"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_ate { + nvidia,pins = "ate", "dap2", "dap3", + "gmd", "owc", "spia", "spib", "spic", + "spid", "spie"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = ; + }; + conf_crtp { + nvidia,pins = "crtp", "gmb", "slxa", "spig", + "spih"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", "kbcb"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_dte { + nvidia,pins = "spif"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsck", "lsda", "lsdi", + "lvp0"; + nvidia,tristate = ; + }; + conf_kbca { + nvidia,pins = "kbca", "kbcc", "kbcd", + "kbce", "kbcf", "sdio1", "uaa", + "uab", "uca", "ucb"; + nvidia,pull = ; + nvidia,tristate = ; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = ; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lsc1", "lspi", + "lvp1", "lvs", "pmc", "sdb"; + nvidia,tristate = ; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0"; + nvidia,pull = ; + }; + drive_ddc { + nvidia,pins = "drive_ddc", + "drive_vi1", + "drive_sdio1"; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + }; + drive_dbg { + nvidia,pins = "drive_dbg", + "drive_vi2", + "drive_at1", + "drive_ao1"; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + }; + + tegra_i2s1: i2s@70002800 { + status = "okay"; + }; + + uartb: serial@70006040 { + compatible = "nvidia,tegra20-hsuart"; + /* GPS BCM4751 */ + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra20-hsuart"; + status = "okay"; + + /* Azurewave AW-NH665 BCM4329B1 */ + bluetooth { + compatible = "brcm,bcm4329-bt"; + + /* PLLP 216MHz / 16 / 4 */ + max-speed = <3375000>; + + clocks = <&rtc_32k_wifi>; + clock-names = "txco"; + + vbat-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8_sys>; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + }; + }; + + uartd: serial@70006300 { + /* Docking station */ + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + + wm8903: audio-codec@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + + interrupt-parent = <&gpio>; + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + gpio-cfg = < + 0x0000 /* MIC_LR_OUT# GPIO, output, low */ + 0x0000 /* FM2018-enable GPIO, output, low */ + 0x0000 /* Speaker-enable GPIO, output, low */ + 0x0200 /* Interrupt, output */ + 0x01a0 /* BCLK, input, active high */ + >; + + AVDD-supply = <&vdd_1v8_sys>; + CPVDD-supply = <&vdd_1v8_sys>; + DBVDD-supply = <&vdd_1v8_sys>; + DCVDD-supply = <&vdd_1v8_sys>; + }; + + touchscreen@4c { + compatible = "atmel,maxtouch"; + reg = <0x4c>; + + atmel,cfg_name = "maxtouch-acer-iconia-tab-a500.cfg"; + + interrupt-parent = <&gpio>; + interrupts = ; + + reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; + + avdd-supply = <&vdd_3v3_sys>; + vdd-supply = <&vdd_3v3_sys>; + }; + + gyroscope@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vlogic-supply = <&vdd_1v8_sys>; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@f { + compatible = "kionix,kxtf9"; + reg = <0x0f>; + + interrupt-parent = <&gpio>; + interrupts = ; + + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + }; + }; + }; + }; + + i2c@7000c400 { + clock-frequency = <10000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + panel_ddc: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + clock-frequency = <100000>; + status = "okay"; + + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0x0c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vid-supply = <&vdd_1v8_sys>; + + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "-1"; + }; + + pmic: pmic@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + + interrupts = ; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_sys>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + vdd_core: sm0 { + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; + }; + + vdd_cpu: sm1 { + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vdd_core &rtc_vdd>; + regulator-coupled-max-spread = <550000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; + }; + + sm2_reg: sm2 { + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + ldo1 { + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + rtc_vdd: ldo2 { + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&vdd_core &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-rtc-regulator; + }; + + ldo3 { + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcore_emmc: ldo5 { + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + avdd_vdac_reg: ldo6 { + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo_rtc { + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + nct1008: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&vdd_3v3_sys>; + #thermal-sensor-cells = <1>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <100>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <458>; + nvidia,sys-clock-req-active-high; + }; + + usb@c5000000 { + compatible = "nvidia,tegra20-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@c5000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_vbus1>; + }; + + usb@c5008000 { + status = "okay"; + }; + + usb-phy@c5008000 { + status = "okay"; + nvidia,xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&vdd_vbus3>; + }; + + brcm_wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&rtc_32k_wifi>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + mmc@c8000000 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + max-frequency = <25000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_3v3_sys>; + + /* Azurewave AW-NH611 BCM4329 */ + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + + mmc@c8000400 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_3v3_sys>; + }; + + mmc@c8000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_3v3_sys>; + non-removable; + }; + + mains: ac-adapter-detect { + compatible = "gpio-charger"; + charger-type = "mains"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_3v3_sys>; + pwms = <&pwm 2 41667>; + + brightness-levels = <7 255>; + num-interpolated-steps = <248>; + default-brightness-level = <20>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "tps658621-out32k"; + }; + + /* + * This standalone onboard fixed-clock always-ON 32KHz + * oscillator is used as a reference clock-source by the + * Azurewave WiFi/BT module. + */ + rtc_32k_wifi: clock@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "kk3270032"; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + display-panel { + compatible = "auo,b101ew05", "panel-lvds"; + + ddc-i2c-bus = <&panel_ddc>; + power-supply = <&vdd_pnl>; + backlight = <&backlight>; + + width-mm = <218>; + height-mm = <135>; + + data-mapping = "jeida-18"; + + panel-timing { + clock-frequency = <71200000>; + hactive = <1280>; + vactive = <800>; + hfront-porch = <8>; + hback-porch = <18>; + hsync-len = <184>; + vsync-len = <3>; + vfront-porch = <4>; + vback-porch = <8>; + }; + + port { + panel_input: endpoint { + remote-endpoint = <&lvds_encoder_output>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + rotation-lock { + label = "Rotate-lock"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + debounce-interval = <10>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + haptic-feedback { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + vcc-supply = <&vdd_3v3_sys>; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + + powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_input: endpoint { + remote-endpoint = <&lcd_output>; + }; + }; + + port@1 { + reg = <1>; + + lvds_encoder_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_vs"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_1v8_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v8_vs"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_pnl: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <300000>; + gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_vbus1: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_vbus3: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-picasso", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Acer Iconia Tab A500 WM8903"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "LINEOUTL", + "Int Spk", "LINEOUTR", + "Mic Jack", "MICBIAS", + "IN2L", "Mic Jack", + "IN2R", "Mic Jack", + "IN1L", "Int Mic", + "IN1R", "Int Mic"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; + nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>; + nvidia,headset; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; + + thermal-zones { + nct1008-local { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + + thermal-sensors = <&nct1008 0>; + }; + + nct1008-remote { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip0: cpu-alert0 { + /* start throttling at 50C */ + temperature = <50000>; + hysteresis = <3000>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + memory-controller@7000f400 { + nvidia,use-ram-code; + + emc-tables@0 { + nvidia,ram-code = <0>; /* elpida-8gb */ + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@25000 { + reg = <25000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <25000>; + nvidia,emc-registers = <0x00000002 0x00000006 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000004 + 0x00000003 0x00000008 0x0000000b 0x0000004d + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000004 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000068 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@50000 { + reg = <50000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <50000>; + nvidia,emc-registers = <0x00000003 0x00000007 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000009f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000007 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x000000d0 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000005 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@75000 { + reg = <75000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <75000>; + nvidia,emc-registers = <0x00000005 0x0000000a + 0x00000004 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x000000ff + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x0000000b + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000138 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000007 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@150000 { + reg = <150000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <150000>; + nvidia,emc-registers = <0x00000009 0x00000014 + 0x00000007 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000021f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000015 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000270 0x00000000 0x00000001 + 0x00000000 0x00000000 0x00000282 0xa07c04ae + 0x007dd510 0x00000000 0x00000000 0x0000000e + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@300000 { + reg = <300000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <300000>; + nvidia,emc-registers = <0x00000012 0x00000027 + 0x0000000d 0x00000006 0x00000007 0x00000005 + 0x00000003 0x00000009 0x00000006 0x00000006 + 0x00000003 0x00000003 0x00000002 0x00000006 + 0x00000003 0x00000009 0x0000000c 0x0000045f + 0x00000000 0x00000004 0x00000004 0x00000006 + 0x00000008 0x00000001 0x0000000e 0x0000002a + 0x00000003 0x0000000f 0x00000007 0x00000005 + 0x00000002 0x000004e1 0x00000005 0x00000002 + 0x00000000 0x00000000 0x00000282 0xe059048b + 0x007e1510 0x00000000 0x00000000 0x0000001b + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + emc-tables@1 { + nvidia,ram-code = <1>; /* elpida-4gb */ + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@25000 { + reg = <25000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <25000>; + nvidia,emc-registers = <0x00000002 0x00000006 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000004 + 0x00000003 0x00000008 0x0000000b 0x0000004d + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000004 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000068 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00000000 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@50000 { + reg = <50000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <50000>; + nvidia,emc-registers = <0x00000003 0x00000007 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000009f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000007 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x000000d0 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00000000 0x00000000 0x00000005 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@75000 { + reg = <75000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <75000>; + nvidia,emc-registers = <0x00000005 0x0000000a + 0x00000004 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x000000ff + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x0000000b + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000138 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00000000 0x00000000 0x00000007 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@150000 { + reg = <150000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <150000>; + nvidia,emc-registers = <0x00000009 0x00000014 + 0x00000007 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000021f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000015 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000270 0x00000000 0x00000001 + 0x00000000 0x00000000 0x00000282 0xa07c04ae + 0x007e4010 0x00000000 0x00000000 0x0000000e + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@300000 { + reg = <300000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <300000>; + nvidia,emc-registers = <0x00000012 0x00000027 + 0x0000000d 0x00000006 0x00000007 0x00000005 + 0x00000003 0x00000009 0x00000006 0x00000006 + 0x00000003 0x00000003 0x00000002 0x00000006 + 0x00000003 0x00000009 0x0000000c 0x0000045f + 0x00000000 0x00000004 0x00000004 0x00000006 + 0x00000008 0x00000001 0x0000000e 0x0000002a + 0x00000003 0x0000000f 0x00000007 0x00000005 + 0x00000002 0x000004e1 0x00000005 0x00000002 + 0x00000000 0x00000000 0x00000282 0xe059048b + 0x007e0010 0x00000000 0x00000000 0x0000001b + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + emc-tables@2 { + nvidia,ram-code = <2>; /* hynix-8gb */ + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@25000 { + reg = <25000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <25000>; + nvidia,emc-registers = <0x00000002 0x00000006 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000004 + 0x00000003 0x00000008 0x0000000b 0x0000004d + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000004 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000068 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@50000 { + reg = <50000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <50000>; + nvidia,emc-registers = <0x00000003 0x00000007 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000009f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000007 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x000000d0 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000005 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@75000 { + reg = <75000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <75000>; + nvidia,emc-registers = <0x00000005 0x0000000a + 0x00000004 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x000000ff + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x0000000b + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000138 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x00070000 0x00000000 0x00000000 0x00000007 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@150000 { + reg = <150000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <150000>; + nvidia,emc-registers = <0x00000009 0x00000014 + 0x00000007 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000021f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000015 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000270 0x00000000 0x00000001 + 0x00000000 0x00000000 0x00000282 0xa07c04ae + 0x007dd010 0x00000000 0x00000000 0x0000000e + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@300000 { + reg = <300000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <300000>; + nvidia,emc-registers = <0x00000012 0x00000027 + 0x0000000d 0x00000006 0x00000007 0x00000005 + 0x00000003 0x00000009 0x00000006 0x00000006 + 0x00000003 0x00000003 0x00000002 0x00000006 + 0x00000003 0x00000009 0x0000000c 0x0000045f + 0x00000000 0x00000004 0x00000004 0x00000006 + 0x00000008 0x00000001 0x0000000e 0x0000002a + 0x00000003 0x0000000f 0x00000007 0x00000005 + 0x00000002 0x000004e1 0x00000005 0x00000002 + 0x00000000 0x00000000 0x00000282 0xe059048b + 0x007e2010 0x00000000 0x00000000 0x0000001b + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + emc-tables@3 { + nvidia,ram-code = <3>; /* hynix-4gb */ + + #address-cells = <1>; + #size-cells = <0>; + + emc-table@25000 { + reg = <25000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <25000>; + nvidia,emc-registers = <0x00000002 0x00000006 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000004 + 0x00000003 0x00000008 0x0000000b 0x0000004d + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000004 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000068 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00000000 0x00000000 0x00000003 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@50000 { + reg = <50000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <50000>; + nvidia,emc-registers = <0x00000003 0x00000007 + 0x00000003 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000009f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000007 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x000000d0 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00078000 0x00000000 0x00000005 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@75000 { + reg = <75000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <75000>; + nvidia,emc-registers = <0x00000005 0x0000000a + 0x00000004 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x000000ff + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x0000000b + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000138 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000282 0xa0ae04ae + 0x0007c000 0x00000000 0x00000000 0x00000007 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@150000 { + reg = <150000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <150000>; + nvidia,emc-registers = <0x00000009 0x00000014 + 0x00000007 0x00000003 0x00000006 0x00000004 + 0x00000002 0x00000009 0x00000003 0x00000003 + 0x00000002 0x00000002 0x00000002 0x00000005 + 0x00000003 0x00000008 0x0000000b 0x0000021f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000008 0x00000001 0x0000000a 0x00000015 + 0x00000003 0x00000008 0x00000004 0x00000006 + 0x00000002 0x00000270 0x00000000 0x00000001 + 0x00000000 0x00000000 0x00000282 0xa07c04ae + 0x007e4010 0x00000000 0x00000000 0x0000000e + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@300000 { + reg = <300000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <300000>; + nvidia,emc-registers = <0x00000012 0x00000027 + 0x0000000d 0x00000006 0x00000007 0x00000005 + 0x00000003 0x00000009 0x00000006 0x00000006 + 0x00000003 0x00000003 0x00000002 0x00000006 + 0x00000003 0x00000009 0x0000000c 0x0000045f + 0x00000000 0x00000004 0x00000004 0x00000006 + 0x00000008 0x00000001 0x0000000e 0x0000002a + 0x00000003 0x0000000f 0x00000007 0x00000005 + 0x00000002 0x000004e1 0x00000005 0x00000002 + 0x00000000 0x00000000 0x00000282 0xe059048b + 0x007e0010 0x00000000 0x00000000 0x0000001b + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + }; +}; -- cgit v1.2.3 From 2720008f4239cf36d57b8d0b3cb2a49d4368a378 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Mon, 29 Jun 2020 05:54:52 +0300 Subject: ARM: tegra: Add device-tree for ASUS Google Nexus 7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are few hardware variants of NVIDIA Tegra30-based Nexus 7 device: 1. WiFi-only (named Grouper) 2. GSM (named Tilapia) 3. Using Maxim PMIC (E1565 board ID) 4. Using Ti PMIC (PM269 board ID) This patch adds device-trees for known and tested variants. Link: https://wiki.postmarketos.org/wiki/Google_Nexus_7_2012_(asus-grouper) Tested-by: Pedro Ângelo Tested-by: Matt Merhar Tested-by: Zack Pearsall Signed-off-by: David Heidelberg Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- arch/arm/boot/dts/Makefile | 3 + .../boot/dts/tegra30-asus-nexus7-grouper-E1565.dts | 9 + .../boot/dts/tegra30-asus-nexus7-grouper-PM269.dts | 9 + .../dts/tegra30-asus-nexus7-grouper-common.dtsi | 1232 +++++++++++++++ .../tegra30-asus-nexus7-grouper-maxim-pmic.dtsi | 185 +++ ...tegra30-asus-nexus7-grouper-memory-timings.dtsi | 1565 ++++++++++++++++++++ .../dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 149 ++ arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi | 149 ++ .../boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts | 9 + ...tegra30-asus-nexus7-tilapia-memory-timings.dtsi | 325 ++++ arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 235 +++ 11 files changed, 3870 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8bdfa28f79ca..10d6981b2fae 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1211,6 +1211,9 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-apalis-eval.dtb \ tegra30-apalis-v1.1-eval.dtb \ + tegra30-asus-nexus7-grouper-PM269.dtb \ + tegra30-asus-nexus7-grouper-E1565.dtb \ + tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts new file mode 100644 index 000000000000..a25b8560b0cd --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi" +#include "tegra30-asus-nexus7-grouper.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565"; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts new file mode 100644 index 000000000000..06ef13ea5df8 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-nexus7-grouper-ti-pmic.dtsi" +#include "tegra30-asus-nexus7-grouper.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269"; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi new file mode 100644 index 000000000000..3922517145e7 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -0,0 +1,1232 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include + +#include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" + +/ { + aliases { + rtc0 = &pmic; + rtc1 = "/rtc@7000e000"; + + serial1 = &uartc; /* Bluetooth */ + serial2 = &uartb; /* GPS */ + }; + + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma@80000000 { + compatible = "shared-dma-pool"; + alloc-ranges = <0x80000000 0x30000000>; + size = <0x10000000>; /* 256MiB */ + linux,cma-default; + reusable; + }; + + ramoops@bfdf0000 { + compatible = "ramoops"; + reg = <0xbfdf0000 0x10000>; /* 64kB */ + console-size = <0x8000>; /* 32kB */ + record-size = <0x400>; /* 1kB */ + ecc-size = <16>; + }; + + trustzone@bfe00000 { + reg = <0xbfe00000 0x200000>; + no-map; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + port@0 { + lcd_output: endpoint { + remote-endpoint = <&lvds_encoder_input>; + bus-width = <24>; + }; + }; + }; + }; + }; + + gpio@6000d000 { + init-mode { + gpio-hog; + gpios = , + , + ; + output-low; + }; + + init-low-power-mode { + gpio-hog; + gpios = ; + input; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat3_pb4", + "sdmmc3_dat2_pb5", + "sdmmc3_dat1_pb6", + "sdmmc3_dat0_pb7", + "sdmmc3_dat4_pd1", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pwr0_pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr1_pc1", + "lcd_m1_pw1"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pclk_pb3 { + nvidia,pins = "lcd_pclk_pb3", + "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_vsync_pj4", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_cs0_n_pn4", + "lcd_sdout_pn5", + "lcd_dc0_pn6", + "lcd_cs1_n_pw0", + "lcd_sdin_pz2", + "lcd_sck_pz4"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2", + "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs4_n_pk2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4", + "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs2_n_pk3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc3_dat5_pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad14_ph6", + "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad4_pg4 { + nvidia,pins = "gmi_ad4_pg4", + "gmi_ad5_pg5"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad8_ph0 { + nvidia,pins = "gmi_ad8_ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3"; + nvidia,function = "pwm3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad13_ph5 { + nvidia,pins = "gmi_ad13_ph5", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_adv_n_pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_ad15_ph7 { + nvidia,pins = "gmi_ad15_ph7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_dqs_pi2 { + nvidia,pins = "gmi_dqs_pi2", + "pu2", + "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs7_n_pi6 { + nvidia,pins = "gmi_cs7_n_pi6", + "gmi_clk_pk1"; + nvidia,function = "nand"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_row1_pr1"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4", + "kb_col5_pq5", + "kb_col7_pq7", + "kb_row2_pr2", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row14_ps6"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6", + "kb_row8_ps0", + "kb_row9_ps1", + "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu0 { + nvidia,pins = "pu0", + "pu6"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + jtag_rtck_pu7 { + nvidia,pins = "jtag_rtck_pu7"; + nvidia,function = "rtck"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + crt_hsync_pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "crt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2", + "spi2_miso_px1", + "spi2_sck_px2"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_cs0_n_px3 { + nvidia,pins = "spi2_cs0_n_px3"; + nvidia,function = "spi6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_mosi_px4 { + nvidia,pins = "spi1_mosi_px4", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1"; + nvidia,function = "ulpi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_wr_n_pz3 { + nvidia,pins = "lcd_wr_n_pz3"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pbb0 { + nvidia,pins = "pbb0", + "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "vgp6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pbb7 { + nvidia,pins = "pbb7", + "pcc2"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_rst_n_pcc3 { + nvidia,pins = "sdmmc4_rst_n_pcc3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_l2_rst_n_pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "pcie"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "dap"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + drive_dap1 { + nvidia,pins = "drive_dap1", + "drive_dap2", + "drive_dbg", + "drive_at5", + "drive_gme", + "drive_ddc", + "drive_ao1", + "drive_uart3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1", + "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = ; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + drive_gma { + nvidia,pins = "drive_gma", + "drive_gmb", + "drive_gmc", + "drive_gmd"; + nvidia,pull-down-strength = <9>; + nvidia,pull-up-strength = <9>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + }; + + uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + /* GPS BCM4751 */ + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + /* Azurewave AW-NH665 BCM4330B1 */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + + max-speed = <4000000>; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "txco"; + + vbat-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8>; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; + }; + }; + + pwm: pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000c500 { + clock-frequency = <100000>; + status = "okay"; + + compass@e { + compatible = "asahi-kasei,ak8974"; + reg = <0x0e>; + + interrupt-parent = <&gpio>; + interrupts = ; + + avdd-supply = <&vdd_3v3_sys>; + dvdd-supply = <&vdd_1v8>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; + + light-sensor@1c { + compatible = "dynaimage,al3010"; + reg = <0x1c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + }; + + accelerometer@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vdd-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8>; + + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; + }; + + i2c@7000d000 { + clock-frequency = <100000>; + status = "okay"; + + rt5640: audio-codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + + realtek,dmic1-data-pin = <1>; + }; + + nct72: temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&vdd_3v3_sys>; + #thermal-sensor-cells = <1>; + }; + + battery@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + }; + + pmc@7000e400 { + status = "okay"; + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <2000>; + nvidia,cpu-pwr-off-time = <200>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + + brcm_wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + + clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>; + clock-names = "ext_clock"; + + reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>; + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + mmc@78000400 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_1v8>; + + /* Azurewave AW-NH665 BCM4330 */ + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + + mmc@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vcore_emmc>; + vqmmc-supply = <&vdd_1v8>; + non-removable; + }; + + usb@7d000000 { + compatible = "nvidia,tegra30-udc"; + status = "okay"; + dr_mode = "peripheral"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,hssync-start-delay = <0>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + power-supply = <&vdd_5v0_sys>; + pwms = <&pwm 0 50000>; + + brightness-levels = <1 255>; + num-interpolated-steps = <254>; + default-brightness-level = <15>; + }; + + /* PMIC has a built-in 32KHz oscillator which is used by PMC */ + clk32k_in: clock@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic-oscillator"; + }; + + cpus { + cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu@1 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@2 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@3 { + cpu-supply = <&vdd_cpu>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + display-panel { + compatible = "hydis,hv070wx2-1e0", "chunghwa,claa070wp03xg", + "panel-lvds"; + + power-supply = <&vdd_pnl>; + backlight = <&backlight>; + + width-mm = <94>; + height-mm = <150>; + rotation = <180>; + + data-mapping = "jeida-24"; + + port { + panel_input: endpoint { + remote-endpoint = <&lvds_encoder_output>; + }; + }; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <0x0>; + tlm,version-minor = <0x0>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + hall-sensor { + label = "Lid"; + gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <500>; + wakeup-event-action = ; + wakeup-source; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-event-action = ; + wakeup-source; + }; + }; + + lvds-encoder { + compatible = "ti,sn75lvds83", "lvds-encoder"; + + powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_encoder_input: endpoint { + remote-endpoint = <&lcd_output>; + }; + }; + + port@1 { + reg = <1>; + + lvds_encoder_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_pnl: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "vdd_panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <300000>; + gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vcc_3v3_ts: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "ldo_s-1167_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_5v0_sys>; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-grouper", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "ASUS Google Nexus 7 ALC5642"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Speakers", "SPORP", + "Speakers", "SPORN", + "Speakers", "SPOLP", + "Speakers", "SPOLN", + "DMIC1", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5640>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + thermal-zones { + nct72-local { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + + thermal-sensors = <&nct72 0>; + }; + + nct72-remote { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct72 1>; + + trips { + trip0: cpu-alert0 { + /* start throttling at 50C */ + temperature = <50000>; + hysteresis = <3000>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi new file mode 100644 index 000000000000..b25b3fa90ac6 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include +#include + +/ { + i2c@7000d000 { + pmic: pmic@3c { + compatible = "maxim,max77663"; + reg = <0x3c>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + system-power-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + }; + }; + + cpu-pwr-req { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + input; + }; + + fps { + fps0 { + maxim,fps-event-source = ; + }; + + fps1 { + maxim,fps-event-source = ; + }; + + fps2 { + maxim,fps-event-source = ; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_1v35>; + in-ldo2-supply = <&vdd_3v3_sys>; + in-ldo3-5-supply = <&vdd_3v3_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v35>; + + vdd_cpu: sd0 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; + }; + + vdd_core: sd1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; + }; + + vdd_1v8: sd2 { + regulator-name = "vdd_gen1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v35: sd3 { + regulator-name = "vdd_ddr3l_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd_ddr_rx"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcore_emmc: ldo3 { + regulator-name = "vcore_emmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "vdd_camera"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-name = "vddio_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo8 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; + + vdd_3v3_sys: regulator@1 { + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "avdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi new file mode 100644 index 000000000000..bc0f6f29b956 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi @@ -0,0 +1,1565 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + memory-controller@7000f000 { + emc-timings-0 { + nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */ + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emem-configuration = < + 0x00020001 /* MC_EMEM_ARB_CFG */ + 0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < + 0x00010001 /* MC_EMEM_ARB_CFG */ + 0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x73430303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x72830504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000003 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x72440a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-333500000 { + clock-frequency = <333500000>; + + nvidia,emem-configuration = < + 0x00000005 /* MC_EMEM_ARB_CFG */ + 0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0608 /* MC_EMEM_ARB_DA_COVERS */ + 0x70850f09 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emem-configuration = < + 0x0000000a /* MC_EMEM_ARB_CFG */ + 0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000010 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000b /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b10 /* MC_EMEM_ARB_DA_COVERS */ + 0x70ea1f11 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */ + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emem-configuration = < + 0x00020001 /* MC_EMEM_ARB_CFG */ + 0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x74830303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emem-configuration = < + 0x00010001 /* MC_EMEM_ARB_CFG */ + 0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0502 /* MC_EMEM_ARB_DA_COVERS */ + 0x73430303 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x00000001 /* MC_EMEM_ARB_CFG */ + 0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000001 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0503 /* MC_EMEM_ARB_DA_COVERS */ + 0x72830504 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x00000003 /* MC_EMEM_ARB_CFG */ + 0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000005 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000003 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000001 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06020102 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0505 /* MC_EMEM_ARB_DA_COVERS */ + 0x72440a06 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-333500000 { + clock-frequency = <333500000>; + + nvidia,emem-configuration = < + 0x00000005 /* MC_EMEM_ARB_CFG */ + 0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000008 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000004 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030202 /* MC_EMEM_ARB_DA_TURNS */ + 0x000b0608 /* MC_EMEM_ARB_DA_COVERS */ + 0x70850f09 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emem-configuration = < + 0x0000000a /* MC_EMEM_ARB_CFG */ + 0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000004 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000010 /* MC_EMEM_ARB_TIMING_RC */ + 0x0000000b /* MC_EMEM_ARB_TIMING_RAS */ + 0x0000000a /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000002 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000004 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000008 /* MC_EMEM_ARB_TIMING_W2R */ + 0x08040202 /* MC_EMEM_ARB_DA_TURNS */ + 0x00130b10 /* MC_EMEM_ARB_DA_COVERS */ + 0x70ea1f11 /* MC_EMEM_ARB_MISC0 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + }; + + memory-controller@7000f400 { + emc-timings-0 { + nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */ + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000004 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x00000008 /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000009 /* EMC_TXSR */ + 0x00000009 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000005 /* EMC_RC */ + 0x00000010 /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000012 /* EMC_TXSR */ + 0x00000012 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000004 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x0000000a /* EMC_RC */ + 0x00000020 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000023 /* EMC_TXSR */ + 0x00000023 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-333500000 { + clock-frequency = <333500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < + 0x0000000f /* EMC_RC */ + 0x00000034 /* EMC_RFC */ + 0x0000000a /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x000009e9 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000039 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x0000000a /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000a2a /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x002600a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x00014000 /* EMC_DLL_XFORM_DQS4 */ + 0x00014000 /* EMC_DLL_XFORM_DQS5 */ + 0x00014000 /* EMC_DLL_XFORM_DQS6 */ + 0x00014000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x018b000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000b71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x0000001f /* EMC_RC */ + 0x00000069 /* EMC_RFC */ + 0x00000017 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000c /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000011 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000b /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001412 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000e /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x00000016 /* EMC_RW2PDEN */ + 0x00000072 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000007 /* EMC_TCLKSTOP */ + 0x00001453 /* EMC_TREFBW */ + 0x0000000c /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf00b0191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000008 /* EMC_DLL_XFORM_DQS0 */ + 0x00000008 /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x00000008 /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000c /* EMC_DLL_XFORM_DQ0 */ + 0x0000000c /* EMC_DLL_XFORM_DQ1 */ + 0x0000000c /* EMC_DLL_XFORM_DQ2 */ + 0x0000000c /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0a000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0156000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */ + 0xf8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + + emc-timings-1 { + nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */ + + timing-25500000 { + clock-frequency = <25500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000001 /* EMC_RC */ + 0x00000004 /* EMC_RFC */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x000000c0 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000001 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x000000c7 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000287 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-51000000 { + clock-frequency = <51000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000002 /* EMC_RC */ + 0x00000008 /* EMC_RFC */ + 0x00000001 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000181 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000009 /* EMC_TXSR */ + 0x00000009 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000002 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000018e /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x8000040b /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000005 /* EMC_RC */ + 0x00000010 /* EMC_RFC */ + 0x00000003 /* EMC_RAS */ + 0x00000001 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000001 /* EMC_RD_RCD */ + 0x00000001 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000303 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000012 /* EMC_TXSR */ + 0x00000012 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000004 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x0000031c /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x007800a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x000fc000 /* EMC_DLL_XFORM_DQS0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS3 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS4 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS5 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS6 */ + 0x000fc000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00000000 /* EMC_ZCAL_INTERVAL */ + 0x00000040 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000713 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-dyn-self-ref; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x0000000a /* EMC_RC */ + 0x00000020 /* EMC_RFC */ + 0x00000007 /* EMC_RAS */ + 0x00000002 /* EMC_RP */ + 0x00000002 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000005 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000002 /* EMC_RD_RCD */ + 0x00000002 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000005 /* EMC_WDV */ + 0x00000005 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000b /* EMC_RDV */ + 0x00000607 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000023 /* EMC_TXSR */ + 0x00000023 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000007 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000638 /* EMC_TREFBW */ + 0x00000006 /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00004288 /* EMC_FBIO_CFG5 */ + 0x004400a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00080000 /* EMC_DLL_XFORM_DQS0 */ + 0x00080000 /* EMC_DLL_XFORM_DQS1 */ + 0x00080000 /* EMC_DLL_XFORM_DQS2 */ + 0x00080000 /* EMC_DLL_XFORM_DQS3 */ + 0x00080000 /* EMC_DLL_XFORM_DQS4 */ + 0x00080000 /* EMC_DLL_XFORM_DQS5 */ + 0x00080000 /* EMC_DLL_XFORM_DQS6 */ + 0x00080000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00080000 /* EMC_DLL_XFORM_DQ0 */ + 0x00080000 /* EMC_DLL_XFORM_DQ1 */ + 0x00080000 /* EMC_DLL_XFORM_DQ2 */ + 0x00080000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800211c /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f108 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x08000168 /* EMC_XM2QUSEPADCTRL */ + 0x08000000 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x000c000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff00 /* EMC_CFG_RSV */ + >; + }; + + timing-333500000 { + clock-frequency = <333500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < + 0x0000000f /* EMC_RC */ + 0x00000034 /* EMC_RFC */ + 0x0000000a /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x000009e9 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000039 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x0000000a /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000a2a /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x002600a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x00014000 /* EMC_DLL_XFORM_DQS4 */ + 0x00014000 /* EMC_DLL_XFORM_DQS5 */ + 0x00014000 /* EMC_DLL_XFORM_DQS6 */ + 0x00014000 /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0600013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x018b000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */ + 0xf8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000b71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000020 /* EMC_RC */ + 0x0000006a /* EMC_RFC */ + 0x00000017 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000c /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000011 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001412 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000e /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x00000016 /* EMC_RW2PDEN */ + 0x00000072 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000007 /* EMC_TCLKSTOP */ + 0x00001453 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf00b0191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0000000a /* EMC_DLL_XFORM_DQS0 */ + 0x0000000a /* EMC_DLL_XFORM_DQS1 */ + 0x0000000a /* EMC_DLL_XFORM_DQS2 */ + 0x0000000a /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000c /* EMC_DLL_XFORM_DQ0 */ + 0x0000000c /* EMC_DLL_XFORM_DQ1 */ + 0x0000000c /* EMC_DLL_XFORM_DQ2 */ + 0x0000000c /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0400013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0a000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0155000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi new file mode 100644 index 000000000000..bfc06b988781 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include +#include + +/ { + i2c@7000d000 { + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + ti,system-power-controller; + ti,sleep-keep-ck32k; + ti,sleep-enable; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_5v0_sys>; + vcc2-supply = <&vdd_5v0_sys>; + vcc3-supply = <&vdd_1v8>; + vcc4-supply = <&vdd_5v0_sys>; + vcc5-supply = <&vdd_5v0_sys>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_5v0_sys>; + vccio-supply = <&vdd_5v0_sys>; + + regulators { + vdd1 { + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + vdd2_reg: vdd2 { + regulator-name = "vdd2_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_cpu: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <1>; + + nvidia,tegra-cpu-regulator; + }; + + vdd_1v8: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vcore_emmc: ldo1 { + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7 { + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <8>; + }; + + ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + ti,regulator-ext-sleep-control = <8>; + }; + }; + }; + + vdd_core: core-regulator@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-coupled-with = <&vdd_cpu>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; + regulator-boot-on; + regulator-always-on; + ti,enable-vout-discharge; + ti,vsel0-state-high; + ti,vsel1-state-high; + + nvidia,tegra-core-regulator; + }; + }; + + vdd_3v3_sys: regulator@1 { + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi new file mode 100644 index 000000000000..a044dbd200a9 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra30-asus-nexus7-grouper-common.dtsi" +#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi" + +/ { + compatible = "asus,grouper", "nvidia,tegra30"; + + display-panel { + panel-timing { + clock-frequency = <68000000>; + hactive = <800>; + vactive = <1280>; + hfront-porch = <24>; + hback-porch = <32>; + hsync-len = <24>; + vsync-len = <1>; + vfront-porch = <5>; + vback-porch = <32>; + }; + }; + + pinmux@70000868 { + state_default: pinmux { + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_cs2_n_pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_mosi_px0 { + nvidia,pins = "spi2_mosi_px0"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs4_n_pk2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs6_n_pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + }; + + i2c@7000c500 { + nfc@28 { + compatible = "nxp,pn544-i2c"; + reg = <0x28>; + clock-frequency = <100000>; + + interrupt-parent = <&gpio>; + interrupts = ; + + enable-gpios = <&gpio TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts new file mode 100644 index 000000000000..f1c63feb4af9 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi" +#include "tegra30-asus-nexus7-tilapia.dtsi" + +/ { + model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565"; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi new file mode 100644 index 000000000000..9169de34fa00 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi" + +/ { + /* + * Tilapia's memory timings are pretty much the same as the Grouper's + * ones. There are few minor tunings made for a higher clock rates, + * these differentiating timings are overridden here for Tilapia. + */ + + memory-controller@7000f400 { + emc-timings-0 { + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000b71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x0000001f /* EMC_RC */ + 0x00000069 /* EMC_RFC */ + 0x00000017 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000c /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000011 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000b /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001412 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000e /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x00000016 /* EMC_RW2PDEN */ + 0x00000072 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000007 /* EMC_TCLKSTOP */ + 0x00001453 /* EMC_TREFBW */ + 0x0000000c /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf00b0191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000008 /* EMC_DLL_XFORM_DQS0 */ + 0x00000008 /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x00000008 /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000c /* EMC_DLL_XFORM_DQ0 */ + 0x0000000c /* EMC_DLL_XFORM_DQ1 */ + 0x0000000c /* EMC_DLL_XFORM_DQ2 */ + 0x0000000c /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0156000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + + emc-timings-1 { + timing-333500000 { + clock-frequency = <333500000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + + nvidia,emc-configuration = < + 0x0000000f /* EMC_RC */ + 0x00000034 /* EMC_RFC */ + 0x0000000a /* EMC_RAS */ + 0x00000003 /* EMC_RP */ + 0x00000003 /* EMC_R2W */ + 0x00000008 /* EMC_W2R */ + 0x00000002 /* EMC_R2P */ + 0x00000009 /* EMC_W2P */ + 0x00000003 /* EMC_RD_RCD */ + 0x00000003 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000004 /* EMC_WDV */ + 0x00000006 /* EMC_QUSE */ + 0x00000004 /* EMC_QRST */ + 0x0000000a /* EMC_QSAFE */ + 0x0000000c /* EMC_RDV */ + 0x000009e9 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000001 /* EMC_PDEX2WR */ + 0x00000008 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000e /* EMC_RW2PDEN */ + 0x00000039 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x0000000a /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000004 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000a2a /* EMC_TREFBW */ + 0x00000000 /* EMC_QUSE_EXTRA */ + 0x00000004 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00007088 /* EMC_FBIO_CFG5 */ + 0x002600a4 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x0003c000 /* EMC_DLL_XFORM_DQS0 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS1 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS2 */ + 0x0003c000 /* EMC_DLL_XFORM_DQS3 */ + 0x00014000 /* EMC_DLL_XFORM_DQS4 */ + 0x00014000 /* EMC_DLL_XFORM_DQS5 */ + 0x00014000 /* EMC_DLL_XFORM_DQS6 */ + 0x00014000 /* EMC_DLL_XFORM_DQS7 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00048000 /* EMC_DLL_XFORM_DQ0 */ + 0x00048000 /* EMC_DLL_XFORM_DQ1 */ + 0x00048000 /* EMC_DLL_XFORM_DQ2 */ + 0x00048000 /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f508 /* EMC_XM2COMPPADCTRL */ + 0x05057404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000007 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x08000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x018b000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff89 /* EMC_CFG_RSV */ + >; + }; + + timing-667000000 { + clock-frequency = <667000000>; + + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-reset = <0x80000b71>; + nvidia,emc-zcal-cnt-long = <0x00000040>; + nvidia,emc-cfg-periodic-qrst; + + nvidia,emc-configuration = < + 0x00000020 /* EMC_RC */ + 0x0000006a /* EMC_RFC */ + 0x00000017 /* EMC_RAS */ + 0x00000007 /* EMC_RP */ + 0x00000005 /* EMC_R2W */ + 0x0000000c /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x00000011 /* EMC_W2P */ + 0x00000007 /* EMC_RD_RCD */ + 0x00000007 /* EMC_WR_RCD */ + 0x00000002 /* EMC_RRD */ + 0x00000001 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000007 /* EMC_WDV */ + 0x0000000a /* EMC_QUSE */ + 0x00000009 /* EMC_QRST */ + 0x0000000b /* EMC_QSAFE */ + 0x00000011 /* EMC_RDV */ + 0x00001412 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x0000000e /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x0000000c /* EMC_AR2PDEN */ + 0x00000016 /* EMC_RW2PDEN */ + 0x00000072 /* EMC_TXSR */ + 0x00000200 /* EMC_TXSRDLL */ + 0x00000005 /* EMC_TCKE */ + 0x00000015 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000006 /* EMC_TCLKSTABLE */ + 0x00000007 /* EMC_TCLKSTOP */ + 0x00001453 /* EMC_TREFBW */ + 0x0000000b /* EMC_QUSE_EXTRA */ + 0x00000006 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x00005088 /* EMC_FBIO_CFG5 */ + 0xf00b0191 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00000008 /* EMC_DLL_XFORM_DQS0 */ + 0x00000008 /* EMC_DLL_XFORM_DQS1 */ + 0x00000008 /* EMC_DLL_XFORM_DQS2 */ + 0x00000008 /* EMC_DLL_XFORM_DQS3 */ + 0x0000000a /* EMC_DLL_XFORM_DQS4 */ + 0x0000000a /* EMC_DLL_XFORM_DQS5 */ + 0x0000000a /* EMC_DLL_XFORM_DQS6 */ + 0x0000000a /* EMC_DLL_XFORM_DQS7 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00018000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x0000000a /* EMC_DLL_XFORM_DQ0 */ + 0x0000000a /* EMC_DLL_XFORM_DQ1 */ + 0x0000000a /* EMC_DLL_XFORM_DQ2 */ + 0x0000000a /* EMC_DLL_XFORM_DQ3 */ + 0x000002a0 /* EMC_XM2CMDPADCTRL */ + 0x0800013d /* EMC_XM2DQSPADCTRL2 */ + 0x22220000 /* EMC_XM2DQPADCTRL2 */ + 0x77fff884 /* EMC_XM2CLKPADCTRL */ + 0x01f1f501 /* EMC_XM2COMPPADCTRL */ + 0x07077404 /* EMC_XM2VTTGENPADCTRL */ + 0x54000000 /* EMC_XM2VTTGENPADCTRL2 */ + 0x080001e8 /* EMC_XM2QUSEPADCTRL */ + 0x0c000021 /* EMC_XM2DQSPADCTRL3 */ + 0x00000802 /* EMC_CTT_TERM_CTRL */ + 0x00020000 /* EMC_ZCAL_INTERVAL */ + 0x00000100 /* EMC_ZCAL_WAIT_CNT */ + 0x0155000c /* EMC_MRS_WAIT_CNT */ + 0xa0f10000 /* EMC_AUTO_CAL_CONFIG */ + 0x00000000 /* EMC_CTT */ + 0x00000000 /* EMC_CTT_DURATION */ + 0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */ + 0xe8000000 /* EMC_FBIO_SPARE */ + 0xff00ff49 /* EMC_CFG_RSV */ + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi new file mode 100644 index 000000000000..e3da89f1941a --- /dev/null +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "tegra30-asus-nexus7-grouper-common.dtsi" +#include "tegra30-asus-nexus7-tilapia-memory-timings.dtsi" + +/ { + compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30"; + + display-panel { + enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <81750000>; + hactive = <800>; + vactive = <1280>; + hfront-porch = <64>; + hback-porch = <128>; + hsync-len = <64>; + vsync-len = <1>; + vfront-porch = <5>; + vback-porch = <2>; + }; + }; + + gpio@6000d000 { + init-mode-3g { + gpio-hog; + gpios = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + output-low; + }; + }; + + pinmux@70000868 { + state_default: pinmux { + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + lcd_pwr2_pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "displaya"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_cs2_n_pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi1_miso_px7 { + nvidia,pins = "spi1_miso_px7"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + spi2_mosi_px0 { + nvidia,pins = "spi2_mosi_px0"; + nvidia,function = "spi2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "dev3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_wp_n_pc7 { + nvidia,pins = "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_cs4_n_pk2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + gmi_cs6_n_pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + }; + + i2c@7000c500 { + proximity-sensor@28 { + compatible = "microchip,cap1106"; + reg = <0x28>; + + /* + * Binding doesn't support specifying linux,input-type + * and this results in unwanted key-presses handled by + * applications, hence keep it disabled for now. + */ + status = "disabled"; + + interrupt-parent = <&gpio>; + interrupts = ; + + linux,keycodes = , + , + , + , + , + ; + }; + + nfc@2a { + compatible = "nxp,pn544-i2c"; + reg = <0x2a>; + + clock-frequency = <100000>; + + interrupt-parent = <&gpio>; + interrupts = ; + + enable-gpios = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + }; +}; -- cgit v1.2.3 From 139a390c091b3941e8519be33f8942e35762bdbf Mon Sep 17 00:00:00 2001 From: Sowjanya Komatineni Date: Tue, 14 Jul 2020 21:20:39 -0700 Subject: arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C Tegra210 VI I2C is in VE power domain and i2c-vi node should have power-domains property. Current Tegra210 i2c-vi device node is missing both VI I2C clocks and power-domains property. This patch adds them. Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 2fc4c1fb6149..c394f1478d52 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -381,6 +381,12 @@ compatible = "nvidia,tegra210-i2c-vi"; reg = <0x0 0x546c0000 0x0 0x00040000>; interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_VI_I2C>, + <&tegra_car TEGRA210_CLK_I2CSLOW>; + clock-names = "div-clk", "slow"; + resets = <&tegra_car 208>; + reset-names = "i2c"; + power-domains = <&pd_venc>; status = "disabled"; }; }; -- cgit v1.2.3 From 4087162fecf4e226a4a3783694aeabf33831ea5a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 15 Jul 2020 11:51:46 +0200 Subject: arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210 The VI I2C controller provides an I2C bus and therefore needs to define the #address-cells and #size-cells properties. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index c394f1478d52..829f786af133 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -388,6 +388,9 @@ reset-names = "i2c"; power-domains = <&pd_venc>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; }; }; -- cgit v1.2.3 From eb93bd8d273bdbb6aa211fcd9165f9755ec86eaa Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 25 Jun 2020 13:39:10 +0200 Subject: arm64: tegra: Add HDMI supplies on Norrin The SOR controller needs the AVDD I/O and VDD HDMI PLL supplies in order to operate correctly. Make sure to specify them for the Norrin board. Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra132-norrin.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts index fb27812eace1..6e5f8465669e 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts @@ -39,6 +39,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; + vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; -- cgit v1.2.3 From d4ff18b86a2aff3da16998f64c02ccd9f8a62c2d Mon Sep 17 00:00:00 2001 From: Sumit Gupta Date: Wed, 15 Jul 2020 19:01:24 +0530 Subject: arm64: tegra: Add compatible string for Tegra194 CPU complex On Tegra194, data on valid operating points for the CPUs needs to be queried from BPMP. However, there is no node representing CPU complex. So, add a compatible string to the 'cpus' node instead of using dummy node to bind the cpufreq driver to. Also, add reference to the BPMP instance for the CPU complex. Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 259e40469908..98c366ab4aab 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1848,6 +1848,8 @@ }; cpus { + compatible = "nvidia,tegra194-ccplex"; + nvidia,bpmp = <&bpmp>; #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 4dc8ff06efa193a7644f7bf5cad37c2b6c53f93b Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Fri, 17 Jul 2020 00:47:46 +0530 Subject: arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi All the platforms using SC7180 SoC are expected to have the wlan firmware memory statically mapped by the Trusted Firmware. Hence move back the qcom,msa-fixed-perm property to the SoC dtsi. Reviewed-by: Douglas Anderson Fixes: 7d484566087c0 ("arm64: dts: qcom: sc7180: Add missing properties for Wifi node") Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200716191746.23196-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 1 - arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 860fc4658b8b..26cc4913d3dd 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -392,7 +392,6 @@ &wifi { status = "okay"; - qcom,msa-fixed-perm; vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; vdd-1.8-xo-supply = <&vreg_l1c_1p8>; vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 126e2fce26c1..a91d3f074625 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -3233,6 +3233,7 @@ , ; memory-region = <&wlan_mem>; + qcom,msa-fixed-perm; status = "disabled"; }; }; -- cgit v1.2.3 From 5720fcdc2e5af74e51c5e3102fcefd9fb061a666 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:37 +0200 Subject: ARM: dts: hisilicon: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wei Xu --- arch/arm/boot/dts/hi3620.dtsi | 2 +- arch/arm/boot/dts/hisi-x5hd2.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 9c207a690df5..f0af1bf2b4d8 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -71,7 +71,7 @@ interrupt-parent = <&gic>; ranges = <0 0xfc000000 0x2000000>; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0x100000 0x100000>; interrupts = <0 15 4>; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi index 696e6982a688..3ee7967c202d 100644 --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -381,7 +381,7 @@ interrupts = <1 13 0xf01>; }; - l2: l2-cache { + l2: cache-controller { compatible = "arm,pl310-cache"; reg = <0x00a10000 0x100000>; interrupts = <0 15 4>; -- cgit v1.2.3 From 7b8bc95f8e20f77f8bce8d2b8f3eb54958726770 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 10:16:56 +0200 Subject: arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220 When overriding nodes, usage of phandles instead of full paths reduces possible mistakes (e.g. in duplicated unit address) and removes duplicate data. The UART nodes were extended via full path and phandle which makes it difficult to review and spot actual differences. No functional change (no difference in dtx_diff). Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 426 ++++++++++++------------- 1 file changed, 210 insertions(+), 216 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index c14205cd6bf5..a41e0db8e71b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -122,222 +122,6 @@ power-off-delay-us = <10>; }; - soc { - spi0: spi@f7106000 { - status = "ok"; - }; - - i2c0: i2c@f7100000 { - status = "ok"; - }; - - i2c1: i2c@f7101000 { - status = "ok"; - }; - - uart1: uart@f7111000 { - assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; - assigned-clock-rates = <150000000>; - status = "ok"; - - bluetooth { - compatible = "ti,wl1835-st"; - enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - clocks = <&pmic>; - clock-names = "ext_clock"; - }; - }; - - uart2: uart@f7112000 { - status = "ok"; - }; - - uart3: uart@f7113000 { - status = "ok"; - }; - - /* - * Legend: proper name = the GPIO line is used as GPIO - * NC = not connected (not routed from the SoC) - * "[PER]" = pin is muxed for peripheral (not GPIO) - * "" = no idea, schematic doesn't say, could be - * unrouted (not connected to any external pin) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Pin assignments taken from LeMaker and CircuitCo Schematics - * Rev A1. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART2. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - gpio0: gpio@f8011000 { - gpio-line-names = "PWR_HOLD", "DSI_SEL", - "USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON", - "PWRON_DET", "5V_HUB_EN"; - }; - - gpio1: gpio@f8012000 { - gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N", - "WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON"; - }; - - gpio2: gpio@f8013000 { - gpio-line-names = - "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ - "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ - "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ - "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ - "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ - "USB_ID_DET", "USB_VBUS_DET", - "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ - }; - - gpio3: gpio@f8014000 { - gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "", - "WLAN_ACTIVE", "NC", "NC"; - }; - - gpio4: gpio@f7020000 { - gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3", - "USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE"; - }; - - gpio5: gpio@f7021000 { - gpio-line-names = "NC", "NC", - "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ - "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ - "[AUX_SSI1]", "NC", - "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ - "[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */ - }; - - gpio6: gpio@f7022000 { - gpio-line-names = - "[SPI0_DIN]", /* Pin 10: SPI0_DI */ - "[SPI0_DOUT]", /* Pin 14: SPI0_DO */ - "[SPI0_CS]", /* Pin 12: SPI0_CS_N */ - "[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */ - "NC", "NC", "NC", - "GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */ - }; - - gpio7: gpio@f7023000 { - gpio-line-names = "NC", "NC", "NC", "NC", - "[PCM_DI]", /* Pin 22: MODEM_PCM_DI */ - "[PCM_DO]", /* Pin 20: MODEM_PCM_DO */ - "NC", "NC"; - }; - - gpio8: gpio@f7024000 { - gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC", - "", "", "", "", "", ""; - }; - - gpio9: gpio@f7025000 { - gpio-line-names = "", - "GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */ - "GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */ - "NC", "NC", "NC", "NC", "[ISP_CCLK0]"; - }; - - gpio10: gpio@f7026000 { - gpio-line-names = "BOOT_SEL", - "[ISP_CCLK1]", - "GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */ - "GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */ - "NC", "NC", - "[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */ - "[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */ - }; - - gpio11: gpio@f7027000 { - gpio-line-names = - "[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */ - "[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */ - "", "NC", "NC", "NC", "", ""; - }; - - gpio12: gpio@f7028000 { - gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]", - "[BT_PCM_DO]", - "NC", "NC", "NC", "NC", - "GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */ - }; - - gpio13: gpio@f7029000 { - gpio-line-names = "[UART0_RX]", "[UART0_TX]", - "[BT_UART1_CTS]", "[BT_UART1_RTS]", - "[BT_UART1_RX]", "[BT_UART1_TX]", - "[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */ - "[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */ - }; - - gpio14: gpio@f702a000 { - gpio-line-names = - "[UART0_RxD]", /* LSEC Pin 7: UART2_RX */ - "[UART0_TxD]", /* LSEC Pin 5: UART2_TX */ - "[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */ - "[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */ - "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */ - "[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */ - "[I2C2_SCL]", "[I2C2_SDA]"; - }; - - gpio15: gpio@f702b000 { - gpio-line-names = "", "", "", "", "", "", "NC", ""; - }; - - /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ - - dwmmc_0: dwmmc0@f723d000 { - cap-mmc-highspeed; - non-removable; - bus-width = <0x8>; - vmmc-supply = <&ldo19>; - }; - - dwmmc_1: dwmmc1@f723e000 { - card-detect-delay = <200>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - vqmmc-supply = <&ldo7>; - vmmc-supply = <&ldo10>; - bus-width = <0x4>; - disable-wp; - cd-gpios = <&gpio1 0 1>; - }; - - dwmmc_2: dwmmc2@f723f000 { - bus-width = <0x4>; - non-removable; - cap-power-off-card; - vmmc-supply = <®_vdd_3v3>; - mmc-pwrseq = <&wl1835_pwrseq>; - - #address-cells = <0x1>; - #size-cells = <0x0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; /* sdio func num */ - /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ - interrupt-parent = <&gpio1>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - }; - }; - leds { compatible = "gpio-leds"; @@ -480,10 +264,26 @@ }; }; +&uart1 { + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; + assigned-clock-rates = <150000000>; + status = "ok"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&pmic>; + clock-names = "ext_clock"; + }; +}; + &uart2 { + status = "ok"; label = "LS-UART0"; }; + &uart3 { + status = "ok"; label = "LS-UART1"; }; @@ -506,6 +306,196 @@ }; }; +&dwmmc_0 { + cap-mmc-highspeed; + non-removable; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; +}; + +&dwmmc_1 { + card-detect-delay = <200>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; +}; + +&dwmmc_2 { + bus-width = <0x4>; + non-removable; + cap-power-off-card; + vmmc-supply = <®_vdd_3v3>; + mmc-pwrseq = <&wl1835_pwrseq>; + + #address-cells = <0x1>; + #size-cells = <0x0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (not routed from the SoC) + * "[PER]" = pin is muxed for peripheral (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Pin assignments taken from LeMaker and CircuitCo Schematics + * Rev A1. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + gpio-line-names = "PWR_HOLD", "DSI_SEL", + "USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON", + "PWRON_DET", "5V_HUB_EN"; +}; + +&gpio1 { + gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N", + "WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON"; +}; + +&gpio2 { + gpio-line-names = + "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ + "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ + "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ + "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ + "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ + "USB_ID_DET", "USB_VBUS_DET", + "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ +}; + +&gpio3 { + gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "", + "WLAN_ACTIVE", "NC", "NC"; +}; + +&gpio4 { + gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3", + "USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE"; +}; + +&gpio5 { + gpio-line-names = "NC", "NC", + "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ + "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ + "[AUX_SSI1]", "NC", + "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ + "[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */ +}; + +&gpio6 { + gpio-line-names = + "[SPI0_DIN]", /* Pin 10: SPI0_DI */ + "[SPI0_DOUT]", /* Pin 14: SPI0_DO */ + "[SPI0_CS]", /* Pin 12: SPI0_CS_N */ + "[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */ + "NC", "NC", "NC", + "GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */ +}; + +&gpio7 { + gpio-line-names = "NC", "NC", "NC", "NC", + "[PCM_DI]", /* Pin 22: MODEM_PCM_DI */ + "[PCM_DO]", /* Pin 20: MODEM_PCM_DO */ + "NC", "NC"; +}; + +&gpio8 { + gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC", + "", "", "", "", "", ""; +}; + +&gpio9 { + gpio-line-names = "", + "GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */ + "GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */ + "NC", "NC", "NC", "NC", "[ISP_CCLK0]"; +}; + +&gpio10 { + gpio-line-names = "BOOT_SEL", + "[ISP_CCLK1]", + "GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */ + "GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */ + "NC", "NC", + "[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */ + "[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */ +}; + +&gpio11 { + gpio-line-names = + "[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */ + "[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */ + "", "NC", "NC", "NC", "", ""; +}; + +&gpio12 { + gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]", + "[BT_PCM_DO]", + "NC", "NC", "NC", "NC", + "GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */ +}; + +&gpio13 { + gpio-line-names = "[UART0_RX]", "[UART0_TX]", + "[BT_UART1_CTS]", "[BT_UART1_RTS]", + "[BT_UART1_RX]", "[BT_UART1_TX]", + "[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */ + "[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */ +}; + +&gpio14 { + gpio-line-names = + "[UART0_RxD]", /* LSEC Pin 7: UART2_RX */ + "[UART0_TxD]", /* LSEC Pin 5: UART2_TX */ + "[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */ + "[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */ + "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */ + "[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */ + "[I2C2_SCL]", "[I2C2_SDA]"; +}; + +&gpio15 { + gpio-line-names = "", "", "", "", "", "", "NC", ""; +}; + +/* GPIO blocks 16 thru 19 do not appear to be routed to pins */ + + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + &i2c2 { #address-cells = <1>; #size-cells = <0>; @@ -549,3 +539,7 @@ }; }; }; + +&spi0 { + status = "ok"; +}; -- cgit v1.2.3 From 0f6b99d2d6124f3cbbfda745730dc6d21fae07d0 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 29 Jun 2020 10:16:57 +0200 Subject: arm64: dts: hisilicon: Align UART nodename with dtschema Fix dtschema validator warnings like: uart@f8015000: $nodename:0: 'uart@f8015000' does not match '^serial(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 2072b637b5af..3d189d9f0d24 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -302,7 +302,7 @@ mboxes = <&mailbox 1 0 11>; }; - uart0: uart@f8015000 { /* console */ + uart0: serial@f8015000 { /* console */ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; interrupts = ; @@ -311,7 +311,7 @@ clock-names = "uartclk", "apb_pclk"; }; - uart1: uart@f7111000 { + uart1: serial@f7111000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7111000 0x0 0x1000>; interrupts = ; @@ -325,7 +325,7 @@ status = "disabled"; }; - uart2: uart@f7112000 { + uart2: serial@f7112000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7112000 0x0 0x1000>; interrupts = ; @@ -337,7 +337,7 @@ status = "disabled"; }; - uart3: uart@f7113000 { + uart3: serial@f7113000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7113000 0x0 0x1000>; interrupts = ; @@ -349,7 +349,7 @@ status = "disabled"; }; - uart4: uart@f7114000 { + uart4: serial@f7114000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7114000 0x0 0x1000>; interrupts = ; -- cgit v1.2.3 From 47e2843f5e2e1cdcf25fdfa28173ae5315e6497b Mon Sep 17 00:00:00 2001 From: John Stultz Date: Sat, 4 Jul 2020 04:31:51 +0000 Subject: dts: hi3660: Add support for basic usb gadget on Hikey960 This patch adds basic core dwc3, usb phy and rt1711h nodes for usb support on Hikey960. This does not enable the mux/hub functionality on the board, so the USB-A host ports will not function, but does allow the USB-C port to function in gadget mode (unfortunately not in host, as the hub/mux functionality is needed to enable vbus output to power devices in host mode). This is based on an old patch originally by Yu Chen. Cc: Yu Chen Cc: Chunfeng Yun Cc: Wei Xu Cc: Binghui Wang Cc: YongQin Liu Cc: Rob Herring Cc: Matthias Brugger Cc: Mark Rutland Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Signed-off-by: John Stultz Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 72 +++++++++++++++++++++++ arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 34 +++++++++++ 2 files changed, 106 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index e035cf195b19..ff392a47562c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -13,6 +13,7 @@ #include #include #include +#include / { model = "HiKey960"; @@ -526,6 +527,48 @@ &i2c1 { status = "okay"; + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "ok"; + interrupt-parent = <&gpio27>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + }; + }; + adv7533: adv7533@39 { status = "ok"; compatible = "adi,adv7533"; @@ -612,3 +655,32 @@ interrupts = <3 IRQ_TYPE_EDGE_RISING>; }; }; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,lfps_filter_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis_enblslpm_quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&rt1711h_ep>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index c39b78989ff9..d25aac5e0bf8 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1152,6 +1152,40 @@ }; }; }; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy: usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + + dwc3: dwc3@ff100000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff100000 0x0 0x100000>; + + clocks = <&crg_ctrl HI3660_CLK_ABB_USB>, + <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + clock-names = "ref", "bus_early"; + + assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + assigned-clock-rates = <229000000>; + + resets = <&crg_rst 0x90 8>, + <&crg_rst 0x90 7>, + <&crg_rst 0x90 6>, + <&crg_rst 0x90 5>; + + interrupts = <0 159 4>, <0 161 4>; + phys = <&usb_phy>; + phy-names = "usb3-phy"; + }; }; }; -- cgit v1.2.3 From bbe28fc3cbabbef781bcdf847615d52ce2e26e42 Mon Sep 17 00:00:00 2001 From: Ricardo Cañuelo Date: Mon, 1 Jun 2020 08:33:06 +0200 Subject: arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit hi3660-hikey960.dts: Define a 'ports' node for 'adv7533: adv7533@39' and the 'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT binding. This fills the requirements to meet the binding requirements, remote endpoints are not defined. hi6220-hikey.dts: Change property name s/pd-gpio/pd-gpios, gpio properties should be plural. This is just a cosmetic change. Signed-off-by: Ricardo Cañuelo Acked-by: Laurent Pinchart Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 11 +++++++++++ arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 2 +- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index ff392a47562c..c1b614dabb8e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -573,6 +573,17 @@ status = "ok"; compatible = "adi,adv7533"; reg = <0x39>; + adi,dsi-lanes = <4>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index a41e0db8e71b..533ed523888d 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -506,7 +506,7 @@ reg = <0x39>; interrupt-parent = <&gpio1>; interrupts = <1 2>; - pd-gpio = <&gpio0 4 0>; + pd-gpios = <&gpio0 4 0>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; -- cgit v1.2.3 From ebf5eccc3c0ad389ba4c4b7c86e900caab2338db Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 3 Jul 2020 10:44:42 +0300 Subject: arm64: dts: ti: k3-j721e-common-proc-board: Remove duplicated main_i2c1_exp4_pins_default Two pimux entry is present with the same name, remove one of them. Fixes: cb27354b38f3 ("arm64: dts: ti: k3-j721e: Add DT nodes for few peripherials") Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 6df823aaa37c..1f1fee85acca 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -102,12 +102,6 @@ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ >; }; - - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { - pinctrl-single,pins = < - J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ - >; - }; }; &wkup_pmx0 { -- cgit v1.2.3 From ed3aad5b8268ca335d3cf0998c37523ba05bc670 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 3 Jul 2020 10:44:43 +0300 Subject: arm64: dts: ti: j721e-common-proc-board: Analog audio support The codec is wired in multi DIN/DOUT setup (DIN1/2/3/4/DOUT1/2/3 is connected to McASP serializer). To support wide range of audio features a generic sound card can not be used since we need to use different reference clock source for 44.1 and 48 KHz family of sampling rates. Depending on the sample size we also need to use different slot width to be able to support 16 and 24 bits. There are couple of notable difference compared to DIN1/DOUT1 mode: the channel mapping is 'random' for first look compared to the single serializer setup: _ _ _ |o|c1 |o|p1 |o|p3 _ | | | | | | |o|c3 |o|c2 |o|p4 |o|p2 ------------------------ c1/2/3 - capture jacks (3rd is line) p1/2/3/4 - playback jacks (4th is line) 2 channel audio (stereo): 0 (left): p1/c1 left 1 (right): p1/c1 right 4 channel audio: 0: p1/c1 left 1: p2/c2 left 2: p1/c1 right 3: p2/c2 right 6 channel audio 0: p1/c1 left 1: p2/c2 left 2: p3/c3 left 3: p1/c1 right 4: p2/c2 right 5: p3/c3 right 8 channel audio 0: p1/c1 left 1: p2/c2 left 2: p3/c3 left 3: p4 left 4: p1/c1 right 5: p2/c2 right 6: p3/c3 right 7: p4 right Signed-off-by: Peter Ujfalusi Signed-off-by: Tero Kristo --- .../boot/dts/ti/k3-j721e-common-proc-board.dts | 136 +++++++++++++++++++++ 1 file changed, 136 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 1f1fee85acca..165907fe1b0f 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -34,6 +34,55 @@ gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; }; }; + + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LMS140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + sound0: sound@0 { + compatible = "ti,j721e-cpb-audio"; + model = "j721e-cpb"; + + ti,cpb-mcasp = <&mcasp10>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 184 1>, + <&k3_clks 184 2>, <&k3_clks 184 4>, + <&k3_clks 157 371>, + <&k3_clks 157 400>, <&k3_clks 157 401>; + clock-names = "cpb-mcasp-auxclk", + "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100", + "cpb-codec-scki", + "cpb-codec-scki-48000", "cpb-codec-scki-44100"; + }; }; &main_pmx0 { @@ -102,6 +151,26 @@ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ >; }; + + mcasp10_pins_default: mcasp10_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ + J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ + J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */ + J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */ + J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */ + J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */ + J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */ + J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */ + J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */ + >; + }; + + audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ + >; + }; }; &wkup_pmx0 { @@ -401,6 +470,22 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + + p09 { + /* P11 - MCASP/TRACE_MUX_S0 */ + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP/TRACE_MUX_S0"; + }; + + p10 { + /* P12 - MCASP/TRACE_MUX_S1 */ + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP/TRACE_MUX_S1"; + }; }; }; @@ -423,6 +508,12 @@ }; }; +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK2 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audi_ext_refclk2_pins_default>; +}; + &main_i2c3 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c3_pins_default>; @@ -434,6 +525,31 @@ gpio-controller; #gpio-cells = <2>; }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + + #sound-dai-cells = <1>; + + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + + /* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */ + clocks = <&k3_clks 157 371>; + clock-names = "scki"; + + /* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */ + assigned-clocks = <&k3_clks 157 371>; + assigned-clock-parents = <&k3_clks 157 400>; + assigned-clock-rates = <24576000>; /* for 48KHz */ + + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; }; &main_i2c6 { @@ -486,3 +602,23 @@ <&k3_clks 152 11>, /* PLL18_HSDIV0 */ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; + +&mcasp10 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcasp10_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 1 1 1 + 2 2 2 0 + >; + tx-num-evt = <0>; + rx-num-evt = <0>; + + status = "okay"; +}; -- cgit v1.2.3 From d7600d070fb075435a8a9a39396c4321f09e7546 Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Sat, 11 Jul 2020 00:32:14 +0530 Subject: arm64: dts: ti: k3-am65-main: Add support for sdhci1 Add support for the 2nd SDHCI controller on TI's AM654x SoCs. Although it supports upto SDR104 (100 MBps @ 200 MHz) speed mode, only enable support upto High Speed (25 MBps @ 50 MHz) for now. Signed-off-by: Faiz Abbas Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 3a4effee8fba..dfb429bed56d 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -259,6 +259,30 @@ dma-coherent; }; + sdhci1: sdhci@4fa0000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 48 0>, <&k3_clks 48 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = ; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x4>; + ti,otap-del-sel-ddr52 = <0x4>; + ti,otap-del-sel-hs200 = <0x7>; + ti,clkbuf-sel = <0x7>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + dma-coherent; + no-1-8-v; + }; + scm_conf: scm_conf@100000 { compatible = "syscon", "simple-mfd"; reg = <0 0x00100000 0 0x1c000>; -- cgit v1.2.3 From 13f74fc647f4a521699d00c463bb31b208815cef Mon Sep 17 00:00:00 2001 From: Faiz Abbas Date: Sat, 11 Jul 2020 00:32:15 +0530 Subject: arm64: dts: ti: k3-am654-base-board: Add support for SD card With silicon revision 2.0, add support for SD card on the am65x-evm. Boards with silicon revision 1.0 are susceptible to interface issues because of erratas i2025 and i2026[1] and are recommended to disable this node. [1] Am654x Silicon Revision 1.0 errata: https://www.ti.com/lit/pdf/sprz452 Signed-off-by: Faiz Abbas Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 2f3d3316a1cf..b40153b4b400 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -167,6 +167,19 @@ >; }; + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ + >; + }; + usb1_pins_default: usb1_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ @@ -300,6 +313,18 @@ disable-wp; }; +/* + * Because of erratas i2025 and i2026 for silicon revision 1.0, the + * SD card interface might fail. Boards with sr1.0 are recommended to + * disable sdhci1 + */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &dwc3_1 { status = "okay"; }; -- cgit v1.2.3 From 303d6f62eb8f30516eed01c3faff188f4780de67 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Mon, 13 Jul 2020 12:14:09 +0200 Subject: arm64: dts: ti: k3-*: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/Makefile | 2 +- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am65.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-am654.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +- include/dt-bindings/pinctrl/k3.h | 2 +- 13 files changed, 13 insertions(+), 13 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index b397945fdf73..05c0bebf65d4 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -3,7 +3,7 @@ # Make file to build device tree binaries for boards based on # Texas Instruments Inc processors # -# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ +# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ # dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index dfb429bed56d..5b15fe24429c 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family Main Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index ae5f813d0cac..8c1abcfe0860 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family MCU Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index f7b9bc562e00..5f55b9e82cf1 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_wakeup { diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 5be75e430965..27c0406b10ba 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index b40153b4b400..611e66207010 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi index b221abf43ac2..f0a6541b8042 100644 --- a/arch/arm64/boot/dts/ti/k3-am654.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC family in Quad core configuration * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include "k3-am65.dtsi" diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 165907fe1b0f..861065a41c79 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 96c929da639d..bdeda701af7c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family Main Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_main { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index e468cc1f8e4d..30a735bcd0c8 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 7680109ca60a..8fa3361e5e45 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index 2f9a56d9b114..d035b61e0e16 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include diff --git a/include/dt-bindings/pinctrl/k3.h b/include/dt-bindings/pinctrl/k3.h index 499de6216581..b0eea7cc6e23 100644 --- a/include/dt-bindings/pinctrl/k3.h +++ b/include/dt-bindings/pinctrl/k3.h @@ -3,7 +3,7 @@ * This header provides constants for pinctrl bindings for TI's K3 SoC * family. * - * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2018 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef _DT_BINDINGS_PINCTRL_TI_K3_H #define _DT_BINDINGS_PINCTRL_TI_K3_H -- cgit v1.2.3 From d0c72c7759d463e31b4ef8937af1df61b513fc2c Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 26 Jun 2020 21:35:32 +0300 Subject: arm64: dts: ti: k3-j721e-main: rename smmu node to iommu Rename smmu node to iommu to fix dtbs_check warning: k3-j721e-common-proc-board.dt.yaml: smmu@36600000: $nodename:0: 'smmu@36600000' does not match '^iommu@[0-9a-f]*' Signed-off-by: Grygorii Strashko Acked-by: Suman Anna Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index bdeda701af7c..d3e8e1ae7569 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -95,7 +95,7 @@ interrupts = ; }; - smmu0: smmu@36600000 { + smmu0: iommu@36600000 { compatible = "arm,smmu-v3"; reg = <0x0 0x36600000 0x0 0x100000>; interrupt-parent = <&gic500>; -- cgit v1.2.3 From 6e6972f9b2e25c62775a99acfca63740db79884f Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Fri, 26 Jun 2020 21:34:37 +0300 Subject: arm64: dts: ti: k3-am65/j721e-main: rename gic-its node to msi-controller The preferable name for gic-its is msi-controller, so rename it to fix dtbs_check warning: k3-j721e-common-proc-board.dt.yaml: interrupt-controller@1800000: gic-its@1820000: False schema does not allow {'compatible': ['arm,gic-v3-its'], 'reg': [[0, 25296896, 0, 65536]], 'socionext,synquacer-pre-its': [[16777216, 4194304]], 'msi-controller': True, '#msi-cells': [[1]]} Signed-off-by: Grygorii Strashko Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 5b15fe24429c..9edfae5944f7 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -42,7 +42,7 @@ */ interrupts = ; - gic_its: gic-its@1820000 { + gic_its: msi-controller@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index d3e8e1ae7569..7c06ef4e5541 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -31,7 +31,7 @@ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = ; - gic_its: gic-its@1820000 { + gic_its: msi-controller@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; -- cgit v1.2.3 From afd094ebe69f91ca44047450fb4b7774aab3aa21 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 29 Jun 2020 15:52:50 +0300 Subject: arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes Add DT nodes for all instances of WIZ and SERDES modules. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 241 ++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 7c06ef4e5541..4b4a30ddcf34 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -4,6 +4,7 @@ * * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ +#include &cbass_main { msmc_ram: sram@70000000 { @@ -277,6 +278,246 @@ pinctrl-single,function-mask = <0xffffffff>; }; + dummy_cmn_refclk: dummy-cmn-refclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + dummy_cmn_refclk1: dummy-cmn-refclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + serdes_wiz0: wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x0 0x5000000 0x10000>; + + wiz0_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll0_refclk>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + wiz0_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&k3_clks 292 0>; + }; + + wiz0_refclk_dig: refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz0_refclk_dig>; + #clock-cells = <0>; + }; + + wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz0_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes0: serdes@5000000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz1: wiz@5010000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>; + assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5010000 0x0 0x5010000 0x10000>; + + wiz1_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + wiz1_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + wiz1_refclk_dig: refclk-dig { + clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_refclk_dig>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{ + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes1: serdes@5010000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz1 0>; + reset-names = "sierra_reset"; + clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz2: wiz@5020000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>; + assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5020000 0x0 0x5020000 0x10000>; + + wiz2_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_pll0_refclk>; + assigned-clock-parents = <&k3_clks 294 11>; + }; + + wiz2_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_pll1_refclk>; + assigned-clock-parents = <&k3_clks 294 0>; + }; + + wiz2_refclk_dig: refclk-dig { + clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_refclk_dig>; + assigned-clock-parents = <&k3_clks 294 11>; + }; + + wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz2_refclk_dig>; + #clock-cells = <0>; + }; + + wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz2_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes2: serdes@5020000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz2 0>; + reset-names = "sierra_reset"; + clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz3: wiz@5030000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>; + assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5030000 0x0 0x5030000 0x10000>; + + wiz3_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_pll0_refclk>; + assigned-clock-parents = <&k3_clks 295 9>; + }; + + wiz3_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_pll1_refclk>; + assigned-clock-parents = <&k3_clks 295 0>; + }; + + wiz3_refclk_dig: refclk-dig { + clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_refclk_dig>; + assigned-clock-parents = <&k3_clks 295 9>; + }; + + wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz3_refclk_dig>; + #clock-cells = <0>; + }; + + wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz3_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes3: serdes@5030000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz3 0>; + reset-names = "sierra_reset"; + clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; -- cgit v1.2.3 From b766e3b0d5f698266ba353821fee09a3862d51d4 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Mon, 29 Jun 2020 15:52:51 +0300 Subject: arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux The system controller node manages the CTRL_MMR0 region. Add serdes_ln_ctrl node which is used for controlling the SERDES lane mux. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Rob Herring Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 27 ++++++++++++++++ include/dt-bindings/mux/mux-j721e-wiz.h | 53 +++++++++++++++++++++++++++++++ 2 files changed, 80 insertions(+) create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 4b4a30ddcf34..93f83a2d0935 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -5,6 +5,8 @@ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include +#include +#include &cbass_main { msmc_ram: sram@70000000 { @@ -19,6 +21,31 @@ }; }; + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x00100000 0x1c000>; + + serdes_ln_ctrl: serdes-ln-ctrl@4080 { + compatible = "mmio-mux"; + reg = <0x00004080 0x50>; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ + <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; + /* SERDES4 lane0/1/2/3 select */ + idle-states = , , + , , + , , + , , + , , , ; + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h new file mode 100644 index 000000000000..fd1c4ea9fc7f --- /dev/null +++ b/include/dt-bindings/mux/mux-j721e-wiz.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for J721E WIZ. + */ + +#ifndef _DT_BINDINGS_J721E_WIZ +#define _DT_BINDINGS_J721E_WIZ + +#define SERDES0_LANE0_QSGMII_LANE1 0x0 +#define SERDES0_LANE0_PCIE0_LANE0 0x1 +#define SERDES0_LANE0_USB3_0_SWAP 0x2 + +#define SERDES0_LANE1_QSGMII_LANE2 0x0 +#define SERDES0_LANE1_PCIE0_LANE1 0x1 +#define SERDES0_LANE1_USB3_0 0x2 + +#define SERDES1_LANE0_QSGMII_LANE3 0x0 +#define SERDES1_LANE0_PCIE1_LANE0 0x1 +#define SERDES1_LANE0_USB3_1_SWAP 0x2 +#define SERDES1_LANE0_SGMII_LANE0 0x3 + +#define SERDES1_LANE1_QSGMII_LANE4 0x0 +#define SERDES1_LANE1_PCIE1_LANE1 0x1 +#define SERDES1_LANE1_USB3_1 0x2 +#define SERDES1_LANE1_SGMII_LANE1 0x3 + +#define SERDES2_LANE0_PCIE2_LANE0 0x1 +#define SERDES2_LANE0_SGMII_LANE0 0x3 +#define SERDES2_LANE0_USB3_1_SWAP 0x2 + +#define SERDES2_LANE1_PCIE2_LANE1 0x1 +#define SERDES2_LANE1_USB3_1 0x2 +#define SERDES2_LANE1_SGMII_LANE1 0x3 + +#define SERDES3_LANE0_PCIE3_LANE0 0x1 +#define SERDES3_LANE0_USB3_0_SWAP 0x2 + +#define SERDES3_LANE1_PCIE3_LANE1 0x1 +#define SERDES3_LANE1_USB3_0 0x2 + +#define SERDES4_LANE0_EDP_LANE0 0x0 +#define SERDES4_LANE0_QSGMII_LANE5 0x2 + +#define SERDES4_LANE1_EDP_LANE1 0x0 +#define SERDES4_LANE1_QSGMII_LANE6 0x2 + +#define SERDES4_LANE2_EDP_LANE2 0x0 +#define SERDES4_LANE2_QSGMII_LANE7 0x2 + +#define SERDES4_LANE3_EDP_LANE3 0x0 +#define SERDES4_LANE3_QSGMII_LANE8 0x2 + +#endif /* _DT_BINDINGS_J721E_WIZ */ -- cgit v1.2.3 From 4716053a0a7bed061bf6c0ef2b845022671bd7cb Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 29 Jun 2020 15:52:52 +0300 Subject: arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX The USB controllers can be connected to one of the 2 SERDESes using a MUX. Add a MUX controller node fot that. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 93f83a2d0935..d14060207f00 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -44,6 +44,13 @@ , , , , , ; }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */ + <0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */ + }; }; gic500: interrupt-controller@1800000 { -- cgit v1.2.3 From 02c35dca2b488ca71aeac970a2f6e13226d239cb Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 29 Jun 2020 15:52:53 +0300 Subject: arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 USB0 supports super-speed mode on the EVM. Enable that. On the EVM, USB0 uses SERDES3 for super-speed lane. Since USB0 is a type-C port, it needs to support lane swapping for cable flip support. This is provided using SERDES lane swap feature. Provide the Type-C cable orientation GPIO to the SERDES Wrapper driver. Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Tero Kristo --- .../boot/dts/ti/k3-j721e-common-proc-board.dts | 32 ++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 861065a41c79..0c709af89f5b 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -109,6 +109,7 @@ main_usbss0_pins_default: main_usbss0_pins_default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; @@ -398,16 +399,43 @@ status = "disabled"; }; +&usb_serdes_mux { + idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ +}; + +&serdes_ln_ctrl { + idle-states = , , + , , + , , + , , + , , , ; +}; + +&serdes_wiz3 { + typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; +}; + +&serdes3 { + serdes3_usb_link: link@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + }; +}; + &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; - ti,usb2-only; ti,vbus-divider; }; &usb0 { dr_mode = "otg"; - maximum-speed = "high-speed"; + maximum-speed = "super-speed"; + phys = <&serdes3_usb_link>; + phy-names = "cdns3,usb3-phy"; }; &usbss1 { -- cgit v1.2.3 From 04fe6477efce92adaf373a6044c90fa8445d2bff Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 29 Jun 2020 15:52:54 +0300 Subject: arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line The Type-C compainon chip on the board needs ~133ms (tCCB_DEFAULT) to debounce the CC lines in order to detect attach and plug orientation and reflect the correct DIR status. [1] On the EVM however we need to wait upto 700ms before sampling the Type-C DIR line else we can get incorrect direction state. [1] http://www.ti.com/lit/ds/symlink/tusb321.pdf Signed-off-by: Roger Quadros Signed-off-by: Sekhar Nori Signed-off-by: Tero Kristo --- arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index 0c709af89f5b..8bc1e6ecc50e 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -413,6 +413,7 @@ &serdes_wiz3 { typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; + typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ }; &serdes3 { -- cgit v1.2.3 From 7f8fe81eb75004dca73aa19127093977a3c8a154 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 8 Jul 2020 18:48:28 +0100 Subject: arm64: defconfig: Enable R8A774E1 SoC Enable the Renesas RZ/G2H (R8A774E1) SoC in the ARM64 defconfig. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594230511-24790-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 883e8bace3ed..113a449419d6 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -865,6 +865,7 @@ CONFIG_QCOM_APR=m CONFIG_ARCH_R8A774A1=y CONFIG_ARCH_R8A774B1=y CONFIG_ARCH_R8A774C0=y +CONFIG_ARCH_R8A774E1=y CONFIG_ARCH_R8A77950=y CONFIG_ARCH_R8A77951=y CONFIG_ARCH_R8A77960=y -- cgit v1.2.3 From 4dd61a524539a42180f2140a4744c6fb82905d0c Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 8 Jul 2020 18:48:29 +0100 Subject: arm64: dts: renesas: Initial r8a774e1 SoC device tree Basic support for the RZ/G2H SoC. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594230511-24790-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 652 ++++++++++++++++++++++++++++++ 1 file changed, 652 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi new file mode 100644 index 000000000000..eb7226e8e892 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774e1 SoC + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include +#include +#include +#include + +#define CPG_AUDIO_CLK_I R8A774E1_CLK_S0D4 + +/ { + compatible = "renesas,r8a774e1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + core2 { + cpu = <&a57_2>; + }; + core3 { + cpu = <&a57_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_2: cpu@2 { + compatible = "arm,cortex-a57"; + reg = <0x2>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU2>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_3: cpu@3 { + compatible = "arm,cortex-a57"; + reg = <0x3>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU3>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774E1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A774E1_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + status = "disabled"; + + /* placeholder */ + }; + + gpio0: gpio@e6050000 { + reg = <0 0xe6050000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio1: gpio@e6051000 { + reg = <0 0xe6051000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio2: gpio@e6052000 { + reg = <0 0xe6052000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio3: gpio@e6053000 { + /* placeholder */ + reg = <0 0xe6053000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio4: gpio@e6054000 { + reg = <0 0xe6054000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio5: gpio@e6055000 { + reg = <0 0xe6055000 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio6: gpio@e6055400 { + reg = <0 0xe6055400 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + gpio7: gpio@e6055800 { + reg = <0 0xe6055800 0 0x50>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + + /* placeholder */ + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774e1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774e1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774e1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774e1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + i2c2: i2c@e6510000 { + reg = <0 0xe6510000 0 0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0xe66d8000 0 0x40>; + status = "disabled"; + + /* placeholder */ + }; + + hscif0: serial@e6540000 { + reg = <0 0xe6540000 0 0x60>; + status = "disabled"; + + /* placeholder */ + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + status = "disabled"; + + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + status = "disabled"; + + /* placeholder */ + }; + + avb: ethernet@e6800000 { + reg = <0 0xe6800000 0 0x800>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* placeholder */ + }; + + can0: can@e6c30000 { + reg = <0 0xe6c30000 0 0x1000>; + status = "disabled"; + + /* placeholder */ + }; + + can1: can@e6c38000 { + reg = <0 0xe6c38000 0 0x1000>; + status = "disabled"; + + /* placeholder */ + }; + + pwm0: pwm@e6e30000 { + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + status = "disabled"; + + /* placeholder */ + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + status = "disabled"; + + /* placeholder */ + + rcar_sound,ssi { + ssi2: ssi-2 { + /* placeholder */ + }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + status = "disabled"; + + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + status = "disabled"; + + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + status = "disabled"; + + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + status = "disabled"; + + /* placeholder */ + }; + + sdhi0: mmc@ee100000 { + reg = <0 0xee100000 0 0x2000>; + status = "disabled"; + + /* placeholder */ + }; + + sdhi2: mmc@ee140000 { + reg = <0 0xee140000 0 0x2000>; + status = "disabled"; + + /* placeholder */ + }; + + sdhi3: mmc@ee160000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = ; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + /* placeholder */ + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + status = "disabled"; + + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x80000>; + status = "disabled"; + + /* placeholder */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; -- cgit v1.2.3 From deadcd50771bc06ad03a3d09c568a0f66694e053 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 8 Jul 2020 18:48:30 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2H main board support Basic support for the HiHope RZ/G2H main board: - Memory, - Main crystal, - Serial console - eMMC Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594230511-24790-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 2 ++ arch/arm64/boot/dts/renesas/hihope-common.dtsi | 4 ++-- arch/arm64/boot/dts/renesas/hihope-rev4.dtsi | 4 ++-- .../boot/dts/renesas/r8a774e1-hihope-rzg2h.dts | 26 ++++++++++++++++++++++ 4 files changed, 32 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 5f00f90a89bd..0008857fb35a 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb + dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index beddfd7a7584..2eda9f66ae81 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2[MN] main board - * Rev.[2.0/3.0/4.0] common parts + * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and + * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi index 9f869187aea6..3046c07a288b 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2[MN] Rev.3.0/4.0 main board - * common parts + * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and + * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts * * Copyright (C) 2020 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts new file mode 100644 index 000000000000..cdbe527e9340 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H main board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774e1.dtsi" +#include "hihope-rev4.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2H main board based on r8a774e1"; + compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; +}; -- cgit v1.2.3 From adbe62e93c1e793ad08d5e913151137b6c24daa4 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 8 Jul 2020 18:48:31 +0100 Subject: arm64: dts: renesas: Add HiHope RZ/G2H sub board support The HiHope RZ/G2H sub board sits below the HiHope RZ/G2H main board. These boards are identical with the ones for RZ/G2M[N]. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594230511-24790-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 1 + arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi | 2 +- arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts | 15 +++++++++++++++ 3 files changed, 17 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 0008857fb35a..9b4e7074557c 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -19,6 +19,7 @@ dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb +dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index acfcfd050a6c..178401a34cbf 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts + * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts new file mode 100644 index 000000000000..265355e0de5f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H sub board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774e1-hihope-rzg2h.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2H with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h", + "renesas,r8a774e1"; +}; -- cgit v1.2.3 From d978d018d16e01894174dd857b2eba42a2140748 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 10 Jul 2020 21:03:32 +0900 Subject: arm64: dts: renesas: add full-pwr-cycle-in-suspend into eMMC nodes Add full-pwr-cycle-in-suspend property to do a graceful shutdown of the eMMC device in system suspend. Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1594382612-13664-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 1 + arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index dc24cec46ae1..7402cfa8d4e4 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -715,6 +715,7 @@ mmc-hs400-1_8v; bus-width = <8>; non-removable; + full-pwr-cycle-in-suspend; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 98bbcafc8c0d..1bf77957d2c2 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -833,6 +833,7 @@ mmc-hs400-1_8v; non-removable; fixed-emmc-driver-type = <1>; + full-pwr-cycle-in-suspend; status = "okay"; }; -- cgit v1.2.3 From a6cb262af1e1adfa6287cb43f09021ee42beb21c Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 10 Jul 2020 21:03:54 +0900 Subject: arm64: dts: renesas: Fix SD Card/eMMC interface device node names Fix the device node names as "mmc@". Fixes: 663386c3e1aa ("arm64: dts: renesas: r8a774a1: Add SDHI nodes") Fixes: 9b33e3001b67 ("arm64: dts: renesas: Initial r8a774b1 SoC device tree") Fixes: 77223211f44d ("arm64: dts: renesas: r8a774c0: Add SDHI nodes") Fixes: d9d67010e0c6 ("arm64: dts: r8a7795: Add SDHI support to dtsi") Fixes: a513cf1e6457 ("arm64: dts: r8a7796: add SDHI nodes") Fixes: 111cc9ace2b5 ("arm64: dts: renesas: r8a77961: Add SDHI nodes") Fixes: f51746ad7d1f ("arm64: dts: renesas: Add Renesas R8A77961 SoC support") Fixes: df863d6f95f5 ("arm64: dts: renesas: initial R8A77965 SoC device tree") Fixes: 9aa3558a02f0 ("arm64: dts: renesas: ebisu: Add and enable SDHI device nodes") Fixes: 83f18749c2f6 ("arm64: dts: renesas: r8a77995: Add SDHI (MMC) support") Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1594382634-13714-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a774b1.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77951.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a77960.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a77961.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a77965.dtsi | 8 ++++---- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 6 +++--- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +- 9 files changed, 31 insertions(+), 31 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index 51a572898fd6..8e80f50132ad 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -2252,7 +2252,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2264,7 +2264,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2276,7 +2276,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2288,7 +2288,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi index b221f2575e63..49e5addcfd97 100644 --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -2110,7 +2110,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2122,7 +2122,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2134,7 +2134,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2146,7 +2146,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 5c72a7efbb03..42171190cce4 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -1618,7 +1618,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1630,7 +1630,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1642,7 +1642,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 61d67d9714ab..9beb8e76d923 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -2590,7 +2590,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2603,7 +2603,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2616,7 +2616,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2629,7 +2629,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 33bf62acffbb..4dfb7f076787 100644 --- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -2394,7 +2394,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2407,7 +2407,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2420,7 +2420,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2433,7 +2433,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index de5770cbf19b..542c44c7dbca 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -1346,7 +1346,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1358,7 +1358,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1370,7 +1370,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -1382,7 +1382,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 6f7ab39fd282..fe4dc12e2bdf 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2120,7 +2120,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2133,7 +2133,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2146,7 +2146,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2159,7 +2159,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index cd11f24744d4..1991bdc36792 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1595,7 +1595,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1608,7 +1608,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1621,7 +1621,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index e5617ec0f49c..2c2272f5f5b5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -916,7 +916,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77995", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; -- cgit v1.2.3 From d8293670ae46e84973c974ea5745527e90a8afbb Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 10 Jul 2020 21:08:56 +0900 Subject: ARM: dts: renesas: Fix SD Card/eMMC interface device node names Fix the device node names as "mmc@". Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree") Fixes: a49f76cddaee ("ARM: dts: r7s9210: Add SDHI support") Fixes: 43304a5f5106 ("ARM: shmobile: r8a73a4: tidyup DT node naming") Fixes: 7d907894bfe3 ("ARM: shmobile: r8a7740: tidyup DT node naming") Fixes: 3ab2ea5fd1ce ("ARM: dts: r8a7742: Add SDHI nodes") Fixes: 63ce8a617b51 ("ARM: dts: r8a7743: Add SDHI controllers") Fixes: b591e323b271 ("ARM: dts: r8a7744: Add SDHI nodes") Fixes: d83010f87ab3 ("ARM: dts: r8a7744: Initial SoC device tree") Fixes: 7079131ef9b9 ("ARM: dts: r8a7745: Add SDHI controllers") Fixes: 0485da788028 ("ARM: dts: r8a77470: Add SDHI1 support") Fixes: 15aa5a95e820 ("ARM: dts: r8a77470: Add SDHI0 support") Fixes: f068cc816015 ("ARM: dts: r8a77470: Add SDHI2 support") Fixes: 14e1d9147d96 ("ARM: shmobile: r8a7778: tidyup DT node naming") Fixes: 2624705ceb7b ("ARM: shmobile: r8a7779: tidyup DT node naming") Fixes: b718aa448378 ("ARM: shmobile: r8a7790: tidyup DT node naming") Fixes: b7ed8a0dd4f1 ("ARM: shmobile: Add SDHI devices to r8a7791 DTSI") Fixes: ce01b14ecf19 ("ARM: dts: r8a7792: add SDHI support") Fixes: fc9ee228f500 ("ARM: dts: r8a7793: Add SDHI controllers") Fixes: b8e8ea127d00 ("ARM: shmobile: r8a7794: add SDHI DT support") Fixes: 33f6be3bf6b7 ("ARM: shmobile: sh73a0: tidyup DT node naming") Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1594382936-14114-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r7s72100.dtsi | 4 ++-- arch/arm/boot/dts/r7s9210.dtsi | 4 ++-- arch/arm/boot/dts/r8a73a4.dtsi | 6 +++--- arch/arm/boot/dts/r8a7740.dtsi | 6 +++--- arch/arm/boot/dts/r8a7742.dtsi | 8 ++++---- arch/arm/boot/dts/r8a7743.dtsi | 6 +++--- arch/arm/boot/dts/r8a7744.dtsi | 6 +++--- arch/arm/boot/dts/r8a7745.dtsi | 6 +++--- arch/arm/boot/dts/r8a77470.dtsi | 6 +++--- arch/arm/boot/dts/r8a7778.dtsi | 6 +++--- arch/arm/boot/dts/r8a7779.dtsi | 8 ++++---- arch/arm/boot/dts/r8a7790.dtsi | 8 ++++---- arch/arm/boot/dts/r8a7791.dtsi | 6 +++--- arch/arm/boot/dts/r8a7792.dtsi | 2 +- arch/arm/boot/dts/r8a7793.dtsi | 6 +++--- arch/arm/boot/dts/r8a7794.dtsi | 6 +++--- arch/arm/boot/dts/sh73a0.dtsi | 6 +++--- 17 files changed, 50 insertions(+), 50 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 0a567d8ebc66..b9b138888048 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -323,7 +323,7 @@ status = "disabled"; }; - sdhi0: sd@e804e000 { + sdhi0: mmc@e804e000 { compatible = "renesas,sdhi-r7s72100"; reg = <0xe804e000 0x100>; interrupts = , @@ -339,7 +339,7 @@ status = "disabled"; }; - sdhi1: sd@e804e800 { + sdhi1: mmc@e804e800 { compatible = "renesas,sdhi-r7s72100"; reg = <0xe804e800 0x100>; interrupts = , diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi index cace43807497..838920aef992 100644 --- a/arch/arm/boot/dts/r7s9210.dtsi +++ b/arch/arm/boot/dts/r7s9210.dtsi @@ -416,7 +416,7 @@ status = "disabled"; }; - sdhi0: sd@e8228000 { + sdhi0: mmc@e8228000 { compatible = "renesas,sdhi-r7s9210"; reg = <0xe8228000 0x8c0>; interrupts = ; @@ -428,7 +428,7 @@ status = "disabled"; }; - sdhi1: sd@e822a000 { + sdhi1: mmc@e822a000 { compatible = "renesas,sdhi-r7s9210"; reg = <0xe822a000 0x8c0>; interrupts = ; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index a3ba722a9d7f..b92e72579836 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -409,7 +409,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupts = ; @@ -419,7 +419,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupts = ; @@ -429,7 +429,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupts = ; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 0588d4446f9a..8048303037ee 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -349,7 +349,7 @@ status = "disabled"; }; - sdhi0: sd@e6850000 { + sdhi0: mmc@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; interrupts = , @@ -362,7 +362,7 @@ status = "disabled"; }; - sdhi1: sd@e6860000 { + sdhi1: mmc@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; interrupts = , @@ -375,7 +375,7 @@ status = "disabled"; }; - sdhi2: sd@e6870000 { + sdhi2: mmc@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; interrupts = , diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 08d89cfb04d8..9743b4242801 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -1286,7 +1286,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7742", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1301,7 +1301,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7742", "renesas,rcar-gen2-sdhi"; reg = <0 0xee120000 0 0x328>; @@ -1316,7 +1316,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7742", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1331,7 +1331,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7742", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index fff123753b85..896916a00b84 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1520,7 +1520,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7743", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1535,7 +1535,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7743", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1550,7 +1550,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7743", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 5050ac19041d..6b56aa286337 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -1520,7 +1520,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7744", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1535,7 +1535,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7744", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1550,7 +1550,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7744", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index b0d1fc24e97e..636248f370e0 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1396,7 +1396,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7745", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1411,7 +1411,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7745", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1426,7 +1426,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7745", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index f55153192276..6baa126b6590 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -882,7 +882,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -897,7 +897,7 @@ status = "disabled"; }; - sdhi1: sd@ee300000 { + sdhi1: mmc@ee300000 { compatible = "renesas,sdhi-mmc-r8a77470"; reg = <0 0xee300000 0 0x2000>; interrupts = ; @@ -908,7 +908,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a77470", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x328>; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 887ffa9819ae..1612b003fb55 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -401,7 +401,7 @@ status = "disabled"; }; - sdhi0: sd@ffe4c000 { + sdhi0: mmc@ffe4c000 { compatible = "renesas,sdhi-r8a7778", "renesas,rcar-gen1-sdhi"; reg = <0xffe4c000 0x100>; @@ -411,7 +411,7 @@ status = "disabled"; }; - sdhi1: sd@ffe4d000 { + sdhi1: mmc@ffe4d000 { compatible = "renesas,sdhi-r8a7778", "renesas,rcar-gen1-sdhi"; reg = <0xffe4d000 0x100>; @@ -421,7 +421,7 @@ status = "disabled"; }; - sdhi2: sd@ffe4f000 { + sdhi2: mmc@ffe4f000 { compatible = "renesas,sdhi-r8a7778", "renesas,rcar-gen1-sdhi"; reg = <0xffe4f000 0x100>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index c0999e27e9b1..c5634daef96f 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -385,7 +385,7 @@ status = "disabled"; }; - sdhi0: sd@ffe4c000 { + sdhi0: mmc@ffe4c000 { compatible = "renesas,sdhi-r8a7779", "renesas,rcar-gen1-sdhi"; reg = <0xffe4c000 0x100>; @@ -395,7 +395,7 @@ status = "disabled"; }; - sdhi1: sd@ffe4d000 { + sdhi1: mmc@ffe4d000 { compatible = "renesas,sdhi-r8a7779", "renesas,rcar-gen1-sdhi"; reg = <0xffe4d000 0x100>; @@ -405,7 +405,7 @@ status = "disabled"; }; - sdhi2: sd@ffe4e000 { + sdhi2: mmc@ffe4e000 { compatible = "renesas,sdhi-r8a7779", "renesas,rcar-gen1-sdhi"; reg = <0xffe4e000 0x100>; @@ -415,7 +415,7 @@ status = "disabled"; }; - sdhi3: sd@ffe4f000 { + sdhi3: mmc@ffe4f000 { compatible = "renesas,sdhi-r8a7779", "renesas,rcar-gen1-sdhi"; reg = <0xffe4f000 0x100>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 166d5566229d..769ba2a33d39 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1467,7 +1467,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1482,7 +1482,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; reg = <0 0xee120000 0 0x328>; @@ -1497,7 +1497,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1512,7 +1512,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 225676fbe312..499cf388735f 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1563,7 +1563,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7791", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1578,7 +1578,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7791", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1593,7 +1593,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7791", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 4627eefa502b..597848ad4dfa 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -780,7 +780,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7792", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 1b62a7e06b42..6d507091b163 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1227,7 +1227,7 @@ dma-channels = <13>; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7793", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1242,7 +1242,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7793", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1257,7 +1257,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7793", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 8d7f8798628a..5f340397ab64 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1232,7 +1232,7 @@ }; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7794", "renesas,rcar-gen2-sdhi"; reg = <0 0xee100000 0 0x328>; @@ -1247,7 +1247,7 @@ status = "disabled"; }; - sdhi1: sd@ee140000 { + sdhi1: mmc@ee140000 { compatible = "renesas,sdhi-r8a7794", "renesas,rcar-gen2-sdhi"; reg = <0 0xee140000 0 0x100>; @@ -1262,7 +1262,7 @@ status = "disabled"; }; - sdhi2: sd@ee160000 { + sdhi2: mmc@ee160000 { compatible = "renesas,sdhi-r8a7794", "renesas,rcar-gen2-sdhi"; reg = <0 0xee160000 0 0x100>; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 01fd06328420..46370d571353 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -321,7 +321,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; interrupts = , @@ -334,7 +334,7 @@ }; /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; interrupts = , @@ -346,7 +346,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; interrupts = , -- cgit v1.2.3 From 59692ac5a7bb8c97ff440fc8917828083fbc38d6 Mon Sep 17 00:00:00 2001 From: Niklas Söderlund Date: Mon, 13 Jul 2020 13:10:16 +0200 Subject: ARM: dts: gose: Fix ports node name for adv7612 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When adding the adv7612 device node the ports node was misspelled as port, fix this. Fixes: bc63cd87f3ce924f ("ARM: dts: gose: add HDMI input") Signed-off-by: Niklas Söderlund Link: https://lore.kernel.org/r/20200713111016.523189-1-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/r8a7793-gose.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 31fd3e9ae33e..abf487e8fe0f 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -393,7 +393,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; default-input = <0>; - port { + ports { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From 615d1a9ebcfb90d5ddbfd887d42eda5dc8b03303 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Mon, 13 Jul 2020 22:35:14 +0100 Subject: arm64: dts: renesas: r8a774e1: Add IPMMU device nodes Add RZ/G2H (R8A774E1) IPMMU nodes. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594676120-5862-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 121 ++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index eb7226e8e892..a50902c8173d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -408,6 +408,127 @@ /* placeholder */ }; + ipmmu_ds0: iommu@e6740000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@e7740000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@e6570000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@e67b0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = , + ; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp0: iommu@ec670000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: iommu@fd800000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: iommu@fd950000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv2: iommu@fd960000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd960000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv3: iommu@fd970000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd970000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774E1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vc1: iommu@fe6f0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe6f0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 13>; + power-domains = <&sysc R8A774E1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@febd0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@febe0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfebe0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: iommu@fe990000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + #iommu-cells = <1>; + }; + + ipmmu_vp1: iommu@fe980000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe980000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 17>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { reg = <0 0xe6800000 0 0x800>; #address-cells = <1>; -- cgit v1.2.3 From f1bf8ff8d58360d396d01f4aab6316e28e75d4b7 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Mon, 13 Jul 2020 22:35:16 +0100 Subject: arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes Add sys-dmac[0-2] device nodes for RZ/G2H (R8A774E1) SoC. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594676120-5862-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 126 ++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index a50902c8173d..4bd660e184ac 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -408,6 +408,132 @@ /* placeholder */ }; + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + ipmmu_ds0: iommu@e6740000 { compatible = "renesas,ipmmu-r8a774e1"; reg = <0 0xe6740000 0 0x1000>; -- cgit v1.2.3 From 43b0c905949735e40b1c90fc354ff2944283103d Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Mon, 13 Jul 2020 22:35:18 +0100 Subject: arm64: dts: renesas: r8a774e1: Add GPIO device nodes Add GPIO device nodes to the DT of the r8a774e1 SoC. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594676120-5862-8-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 73 ++++++++++++++++++++++++------- 1 file changed, 56 insertions(+), 17 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 4bd660e184ac..17b69d9a634c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -246,84 +246,123 @@ }; gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6050000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 0 16>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6051000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 32 29>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6052000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 64 15>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { - /* placeholder */ + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6053000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 96 16>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6054000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 128 18>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055000 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 160 26>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055400 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 906>; }; gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; reg = <0 0xe6055800 0 0x50>; + interrupts = ; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pfc 0 224 4>; #interrupt-cells = <2>; interrupt-controller; - - /* placeholder */ + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pfc: pin-controller@e6060000 { -- cgit v1.2.3 From 8d54886cbb4efb6e7a35ee1c7d0e9d91b4c73ca9 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Mon, 13 Jul 2020 22:35:20 +0100 Subject: arm64: dts: renesas: r8a774e1: Add Ethernet AVB node This patch adds the SoC specific part of the Ethernet AVB device tree node. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594676120-5862-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 41 +++++++++++++++++++++++++++++-- 1 file changed, 39 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 17b69d9a634c..d76aec73aa28 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -695,12 +695,49 @@ }; avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774e1", + "renesas,etheravb-rcar-gen3"; reg = <0 0xe6800000 0 0x800>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; - - /* placeholder */ }; can0: can@e6c30000 { -- cgit v1.2.3 From a1d8a344f1ca0709f6e761a794d89d067263e148 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Wed, 15 Jul 2020 09:06:21 -0500 Subject: arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit Beacon EmebeddedWorks, formerly Logic PD is introducing a new SOM and development kit based on the RZ/G2M SoC from Renesas. The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1 cellular radio. The Baseboard has Ethernet, USB, HDMI, stereo audio in and out, along with a variety of push buttons and LED's, and support for a parallel RGB and an LVDS display. Signed-off-by: Adam Ford Link: https://lore.kernel.org/r/20200715140622.1295370-1-aford173@gmail.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/Makefile | 1 + .../boot/dts/renesas/beacon-renesom-baseboard.dtsi | 758 +++++++++++++++++++++ .../arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 312 +++++++++ .../boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts | 29 + 4 files changed, 1100 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi create mode 100644 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 9b4e7074557c..d7902294faf3 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi new file mode 100644 index 000000000000..66c9153b3101 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +#include +#include + +/ { + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + power-supply = <®_lcd>; + enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + backlight_rgb: backlight-rgb { + compatible = "pwm-backlight"; + power-supply = <®_lcd>; + enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + key-1 { + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "Switch-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "Switch-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "Switch-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "Switch-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-5 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "Switch-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led0 { + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + label = "LED0"; + linux,default-trigger = "heartbeat"; + }; + led1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + label = "LED1"; + }; + led2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + label = "LED2"; + }; + led3 { + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + label = "LED3"; + }; + }; + + lvds { + compatible = "panel-lvds"; + power-supply = <®_lcd_reset>; + width-mm = <223>; + height-mm = <125>; + backlight = <&backlight_lvds>; + data-mapping = "vesa-24"; + + panel-timing { + /* 800x480@60Hz */ + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hsync-len = <48>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <13>; + vback-porch = <29>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + rgb { + /* Different LCD with compatible timings */ + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_rgb>; + enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd>; + port { + rgb_panel: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + }; + + reg_audio: regulator_audio { + compatible = "regulator-fixed"; + regulator-name = "audio-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "nLCD_RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd>; + }; + + reg_cam0: regulator_camera { + compatible = "regulator-fixed"; + regulator-name = "reg_cam0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_cam1: regulator_camera { + compatible = "regulator-fixed"; + regulator-name = "reg_cam1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + }; + + sound_card { + compatible = "audio-graph-card"; + label = "rcar-sound"; + dais = <&rsnd_port0>, <&rsnd_port1>; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + regulator-always-on; + }; + + /* External DU dot clocks */ + x302_clk: x302-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x304_clk: x304-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&audio_clk_a { + clock-frequency = <24576000>; + assigned-clocks = <&versaclock6_bb 4>; + assigned-clock-rates = <24576000>; +}; + +&audio_clk_b { + clock-frequency = <22579200>; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + renesas,can-clock-select = <0x0>; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + renesas,can-clock-select = <0x0>; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&du_out_rgb { + remote-endpoint = <&rgb_panel>; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; +}; + +&ehci1 { + status = "okay"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; +}; + +&hdmi0 { + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + gpio_exp2: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_exp3: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_exp4: gpio@23 { + compatible = "onnn,pca9654"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + versaclock6_bb: clock-controller@6a { + compatible = "idt,5p49v6965"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */ + assigned-clocks = <&versaclock6_bb 1>, + <&versaclock6_bb 2>, + <&versaclock6_bb 3>, + <&versaclock6_bb 4>; + assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:Default */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:Default */ + 0x0000 /* 5:Default */ + >; + port { + wm8962_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; + + /* 0 - lcd_reset */ + /* 1 - lcd_pwr */ + /* 2 - lcd_select */ + /* 3 - backlight-enable */ + /* 4 - Touch_shdwn */ + /* 5 - LCD_H_pol */ + /* 6 - lcd_V_pol */ + gpio_exp1: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + }; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pfc { + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp"; + function = "du"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + led_pins: leds { + /* GP_0_4 , AVS1, AVS2, GP_7_3 */ + pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3"; + bias-pull-down; + }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; + + pwm2_pins: pwm2 { + groups = "pwm2_a"; + function = "pwm2_a"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + mux { + groups = "usb0"; + function = "usb0"; + }; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + }; + + usb30_pins: usb30 { + mux { + groups = "usb30"; + function = "usb30"; + }; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm2 { + pinctrl-0 = <&pwm2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_endpoint0: endpoint { + remote-endpoint = <&wm8962_endpoint>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi1 &dvc1 &src1>; + capture = <&ssi0>; + }; + }; + rsnd_port1: port@1 { + reg = <0x01>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&rwdt { + status = "okay"; + timeout-sec = <60>; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif5 { + pinctrl-0 = <&scif5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&tmu0 { + status = "okay"; +}; + +&tmu1 { + status = "okay"; +}; + +&tmu2 { + status = "okay"; +}; + +&tmu3 { + status = "okay"; +}; + +&tmu4 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&vin0 { + status = "okay"; +}; +&vin1 { + status = "okay"; +}; +&vin2 { + status = "okay"; +}; +&vin3 { + status = "okay"; +}; +&vin4 { + status = "okay"; +}; +&vin5 { + status = "okay"; +}; +&vin6 { + status = "okay"; +}; +&vin7 { + status = "okay"; +}; + +&xhci0 +{ + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi new file mode 100644 index 000000000000..97272f5fa0ab --- /dev/null +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +#include + +/ { + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + osc_32k: osc_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_pwrseq: wlan_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>; + clocks = <&osc_32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb_hub_reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + max-speed = <4000000>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; + clocks = <&osc_32k>; + clock-names = "extclk"; + }; +}; + +&hscif2 { + status = "okay"; + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_20_0", + "wl_reg_on", + "bt_reg_on", + "i2c4_20_3", + "i2c4_20_4", + "bt_dev_wake", + "i2c4_20_6", + "i2c4_20_7"; + }; + + pca9654_lte: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + interrupt-parent = <&gpio5>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_21_0", + "zoe_pwr_on", + "zoe_extint", + "zoe_reset_n", + "sara_reset", + "i2c4_21_5", + "sara_pwr_off", + "sara_networking_status"; + }; + + eeprom@50 { + compatible = "microchip,at24c64", "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x50>; + }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; + + versaclock5: versaclock_som@6a { + compatible = "idt,5p49v6965"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + /* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */ + assigned-clocks = <&versaclock5 1>, + <&versaclock5 2>, + <&versaclock5 3>, + <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data_a"; + function = "hscif2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif5_pins: scif5 { + groups = "scif5_data_a"; + function = "scif5"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi2_pins>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + cap-power-off-card; + pm-ignore-notify; + keep-power-in-suspend; + mmc-pwrseq = <&wlan_pwrseq>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&vspb { + status = "okay"; +}; + +&vspi0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts new file mode 100644 index 000000000000..2c5b057c30c6 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774a1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon EmbeddedWorks RZ/G2M Development Kit"; + compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; -- cgit v1.2.3 From d18dbce4e8c02634866dc80c7873e6121fcae970 Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 15 Jul 2020 12:08:51 +0100 Subject: arm64: dts: renesas: r8a774e1: Add operating points The RZ/G2H (r8a774e1) comes with two clusters of processors, similarly to the r8a774a1. The first cluster is made of A57s, the second cluster is made of A53s. The operating points for the cluster with the A57s are: Frequency | Voltage ----------|--------- 500 MHz | 0.82V 1.0 GHz | 0.82V 1.5 GHz | 0.82V The operating points for the cluster with the A53s are: Frequency | Voltage ----------|--------- 800 MHz | 0.82V 1.0 GHz | 0.82V 1.2 GHz | 0.82V This patch adds the definitions for the operating points to the SoC specific DT. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594811350-14066-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 51 +++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index d76aec73aa28..3a3490adc8a0 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -34,6 +34,49 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -79,6 +122,7 @@ enable-method = "psci"; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -91,6 +135,7 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -103,6 +148,7 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -115,6 +161,7 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; #cooling-cells = <2>; }; @@ -129,6 +176,7 @@ #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; }; @@ -140,6 +188,7 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; }; @@ -151,6 +200,7 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; }; @@ -162,6 +212,7 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; }; -- cgit v1.2.3 From 6dd733679911598354b0445f07a3e6c3141c865c Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 15 Jul 2020 12:08:54 +0100 Subject: arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support Add thermal support for R8A774E1 (RZ/G2H) SoC. Based on the work done for r8a774a1 SoC. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594811350-14066-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 81 +++++++++++++++++++++++++++++++ 1 file changed, 81 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 3a3490adc8a0..70c5e28e201e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -442,6 +442,20 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a774e1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc"; #interrupt-cells = <2>; @@ -1003,6 +1017,73 @@ }; }; + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <6313>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <6313>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <6313>; + + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, -- cgit v1.2.3 From c6c4b7defd391da84da0ac640df0da2a13680a9e Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 15 Jul 2020 12:08:56 +0100 Subject: arm64: dts: renesas: r8a774e1: Add CMT device nodes This patch adds the CMT[0123] device tree nodes to the r8a774e1 SoC specific DT. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594811350-14066-7-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 70 +++++++++++++++++++++++++++++++ 1 file changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 70c5e28e201e..264f3b7e3c11 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -421,6 +421,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774e1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a774e1-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; -- cgit v1.2.3 From 58eb575cf0450bab583dc4009a39644bf98754cc Mon Sep 17 00:00:00 2001 From: Marian-Cristian Rotariu Date: Wed, 15 Jul 2020 12:08:58 +0100 Subject: arm64: dts: renesas: r8a774e1: Add TMU device nodes This patch adds TMU[01234] device tree nodes to the r8a774e1 SoC specific DT. Signed-off-by: Marian-Cristian Rotariu Signed-off-by: Lad Prabhakar Link: https://lore.kernel.org/r/1594811350-14066-9-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 65 +++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 264f3b7e3c11..c4f12544703d 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -542,6 +542,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = , + , + ; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c2: i2c@e6510000 { reg = <0 0xe6510000 0 0x40>; #address-cells = <1>; -- cgit v1.2.3 From b9b491a70402f21eb47c10910438c9e0d10a0e17 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:08:59 +0100 Subject: arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes Add the device nodes for RZ/G2H SCIF and HSCIF serial ports, including clocks, power domains and DMAs. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 169 +++++++++++++++++++++++++++++- 1 file changed, 168 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index c4f12544703d..71d072e330ca 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -626,10 +626,91 @@ }; hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; reg = <0 0xe6540000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 520>; status = "disabled"; + }; - /* placeholder */ + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = ; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; }; hsusb: usb@e6590000 { @@ -962,6 +1043,40 @@ /* placeholder */ }; + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a774e1", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -971,11 +1086,63 @@ <&cpg CPG_CORE R8A774E1_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; }; + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ -- cgit v1.2.3 From 31941342888d4fa008fb27cef9d4ae5913df8792 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:00 +0100 Subject: arm64: dts: renesas: r8a774e1: Add SDHI nodes Add SDHI[0-2] device nodes to R8A774E1 SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 32 ++++++++++++++++++++++++++++--- 1 file changed, 29 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 71d072e330ca..4b3a4498f865 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1219,17 +1219,42 @@ }; sdhi0: mmc@ee100000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; + }; - /* placeholder */ + sdhi1: mmc@ee120000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; + status = "disabled"; }; sdhi2: mmc@ee140000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; + interrupts = ; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; - - /* placeholder */ }; sdhi3: mmc@ee160000 { @@ -1241,6 +1266,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; -- cgit v1.2.3 From 950a3a7951cdeb908798a49d57e5303ad7afd05a Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:03 +0100 Subject: arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support Add the I2C[0-6] and IIC Bus Interface for DVFS (IIC for DVFS) devices nodes to the r8a774e1 device tree. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-14-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 119 +++++++++++++++++++++++++++++- 1 file changed, 116 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 4b3a4498f865..c0a5de332635 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -607,22 +607,135 @@ status = "disabled"; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + i2c2: i2c@e6510000 { - reg = <0 0xe6510000 0 0x40>; #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; status = "disabled"; + }; - /* placeholder */ + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; }; i2c4: i2c@e66d8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; reg = <0 0xe66d8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; status = "disabled"; + }; - /* placeholder */ + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = ; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774e1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = ; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; }; hscif0: serial@e6540000 { -- cgit v1.2.3 From 05c79a8f0c843dfaae09cfde338c5e570f3d9b6b Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:05 +0100 Subject: arm64: dts: renesas: r8a774e1: Add MSIOF nodes Add the DT nodes needed by MSIOF[0123] interfaces to the SoC dtsi. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-16-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 62 +++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index c0a5de332635..ede0358b8cdd 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -1256,6 +1256,68 @@ status = "disabled"; }; + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = ; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + rcar_sound: sound@ec500000 { reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ -- cgit v1.2.3 From 96ebdb7a87917fd6ee74f46024ca756cc3d3d1ce Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:07 +0100 Subject: arm64: dts: renesas: r8a774e1: Add RWDT node Add a device node for the Watchdog Timer (RWDT) controller on the Renesas RZ/G2H (r8a774e1) SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-18-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index ede0358b8cdd..0ebf086f5ce9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -290,10 +290,14 @@ ranges; rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774e1-wdt", + "renesas,rcar-gen3-wdt"; reg = <0 0xe6020000 0 0x0c>; + interrupts = ; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 402>; status = "disabled"; - - /* placeholder */ }; gpio0: gpio@e6050000 { -- cgit v1.2.3 From 8e340e7560d1d4db3b7ed5c010d3460de8ff0c1e Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Wed, 15 Jul 2020 12:09:10 +0100 Subject: arm64: dts: renesas: r8a774e1: Add CAN[FD] support Add CAN[01] and CANFD support to RZ/G2H (R8A774E1) SoC specific dtsi. Signed-off-by: Lad Prabhakar Reviewed-by: Marian-Cristian Rotariu Link: https://lore.kernel.org/r/1594811350-14066-21-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 56 +++++++++++++++++++++++++++++-- 1 file changed, 53 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi index 0ebf086f5ce9..0f86cfd52425 100644 --- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi @@ -34,6 +34,13 @@ clock-frequency = <0>; }; + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + cluster0_opp: opp_table0 { compatible = "operating-points-v2"; opp-shared; @@ -1139,17 +1146,60 @@ }; can0: can@e6c30000 { + compatible = "renesas,can-r8a774e1", + "renesas,rcar-gen3-can"; reg = <0 0xe6c30000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; - - /* placeholder */ }; can1: can@e6c38000 { + compatible = "renesas,can-r8a774e1", + "renesas,rcar-gen3-can"; reg = <0 0xe6c38000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; + }; - /* placeholder */ + canfd: can@e66c0000 { + compatible = "renesas,r8a774e1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = , + ; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; }; pwm0: pwm@e6e30000 { -- cgit v1.2.3 From 8aa937cb4aebc31746ceed1c28b20557ef105f08 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 19 May 2020 09:55:25 +0200 Subject: ARM: dts: sh73a0: Add missing clocks to sound node The device node for the FIFO-buffered Serial Interface sound node lacks the "clocks" property, as the DTS file didn't describe any clocks yet at its introduction. Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20200519075525.24742-1-geert+renesas@glider.be --- arch/arm/boot/dts/sh73a0.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 46370d571353..a4d63125ac56 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -584,6 +584,7 @@ compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2"; reg = <0xec230000 0x400>; interrupts = ; + clocks = <&mstp3_clks SH73A0_CLK_FSI>; power-domains = <&pd_a4mp>; status = "disabled"; }; -- cgit v1.2.3 From 0f134e39ae651ff3b77c44de387ee1c49d63e99b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 16 Jul 2020 14:01:38 +0200 Subject: arm64: tegra: Add the GPU on Tegra194 The GPU found on NVIDIA Tegra194 SoCs is a Volta generation GPU called GV11B. Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding --- arch/arm64/boot/dts/nvidia/tegra194.dtsi | 34 ++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 98c366ab4aab..48160f48003a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1395,6 +1395,40 @@ nvidia,interface = <3>; }; }; + + gpu@17000000 { + compatible = "nvidia,gv11b"; + reg = <0x17000000 0x10000000>, + <0x18000000 0x10000000>; + interrupts = , + ; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA194_CLK_GPCCLK>, + <&bpmp TEGRA194_CLK_GPU_PWR>, + <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "gpu", "pwr", "fuse"; + resets = <&bpmp TEGRA194_RESET_GPU>; + reset-names = "gpu"; + dma-coherent; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>; + interconnect-names = "dma-mem", "read-0-hp", "write-0", + "read-1", "read-1-hp", "write-1", + "read-2", "read-2-hp", "write-2", + "read-3", "read-3-hp", "write-3"; + }; }; pcie@14100000 { -- cgit v1.2.3 From 19ecbc84217953ce629148c61208536b17731d0a Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Jul 2020 16:34:33 +0530 Subject: arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Tested-by: Rob Clark Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1594292674-15632-4-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 59 ++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 759cdd0b002b..e506793407d8 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3721,6 +3721,35 @@ #power-domain-cells = <1>; }; + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3765,6 +3794,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <300000000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -3789,6 +3820,30 @@ }; }; }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; dsi0: dsi@ae94000 { @@ -3811,6 +3866,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -3875,6 +3932,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; phy-names = "dsi"; -- cgit v1.2.3 From b007e06651ff0fe8865bfe75fa1c94a5ff49a321 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 9 Jul 2020 16:34:34 +0530 Subject: arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Signed-off-by: Rajendra Nayak Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1594292674-15632-5-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 49 ++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a91d3f074625..16df08d9ef8f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2754,6 +2754,8 @@ <19200000>, <19200000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -2771,6 +2773,31 @@ }; }; }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; dsi0: dsi@ae94000 { @@ -2794,6 +2821,9 @@ "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + phys = <&dsi_phy>; phy-names = "dsi"; @@ -2819,6 +2849,25 @@ }; }; }; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi_phy: dsi-phy@ae94400 { -- cgit v1.2.3 From e7e46a1f6b755248058db531b1cff3b0cc580650 Mon Sep 17 00:00:00 2001 From: Johan Jonker Date: Wed, 15 Jul 2020 09:09:54 +0200 Subject: arm64: dts: rockchip: remove bus-width from mmc nodes in px30 dts files 'bus-width' has been added to px30.dtsi mmc nodes, so now it can be removed from the dts files that include it. Signed-off-by: Johan Jonker Link: https://lore.kernel.org/r/20200715070954.1992-1-jbx6244@gmail.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30-evb.dts | 3 --- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 1 - 2 files changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 0a680257d9c2..5fe905fae9a8 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -145,7 +145,6 @@ }; &emmc { - bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; @@ -499,7 +498,6 @@ }; &sdmmc { - bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <800>; @@ -513,7 +511,6 @@ }; &sdio { - bus-width = <4>; cap-sd-highspeed; keep-power-in-suspend; non-removable; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index b3a8f936578f..35bd6b904b9c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -445,7 +445,6 @@ }; &sdmmc { - bus-width = <4>; cap-sd-highspeed; card-detect-delay = <200>; cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ -- cgit v1.2.3 From 505af9184ec0a0222bb883486137fac32731e01d Mon Sep 17 00:00:00 2001 From: Sugar Zhang Date: Mon, 29 Jun 2020 22:12:11 +0800 Subject: arm64: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang Link: https://lore.kernel.org/r/1593439935-68540-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 + arch/arm64/boot/dts/rockchip/rk3308.dtsi | 2 ++ arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 + arch/arm64/boot/dts/rockchip/rk3368.dtsi | 2 ++ arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 ++ 5 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index e9bb2b97ae55..2695ea8cda14 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -714,6 +714,7 @@ reg = <0x0 0xff240000 0x0 0x4000>; interrupts = , ; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index ba1c71568164..e8b754d415d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -524,6 +524,7 @@ reg = <0x0 0xff2c0000 0x0 0x4000>; interrupts = , ; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -534,6 +535,7 @@ reg = <0x0 0xff2d0000 0x0 0x4000>; interrupts = , ; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 72e655020560..bbdb19a3e85d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -153,6 +153,7 @@ reg = <0x0 0xff1f0000 0x0 0x4000>; interrupts = , ; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 5d25a9d04051..3746f23dc3df 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -149,6 +149,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC_PERI>; clock-names = "apb_pclk"; }; @@ -160,6 +161,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC_BUS>; clock-names = "apb_pclk"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index f2ef0d8ba54b..ada724b12f01 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -209,6 +209,7 @@ interrupts = , ; #dma-cells = <1>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC0_PERILP>; clock-names = "apb_pclk"; }; @@ -219,6 +220,7 @@ interrupts = , ; #dma-cells = <1>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1_PERILP>; clock-names = "apb_pclk"; }; -- cgit v1.2.3 From fb082df317823463eaf09ac88de19fb3319e4f58 Mon Sep 17 00:00:00 2001 From: Sugar Zhang Date: Mon, 29 Jun 2020 22:10:57 +0800 Subject: ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang Link: https://lore.kernel.org/r/1593439866-68459-1-git-send-email-sugar.zhang@rock-chips.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3036.dtsi | 1 + arch/arm/boot/dts/rk322x.dtsi | 1 + arch/arm/boot/dts/rk3288.dtsi | 3 +++ arch/arm/boot/dts/rk3xxx.dtsi | 3 +++ arch/arm/boot/dts/rv1108.dtsi | 1 + 5 files changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index d9a0c9a29b68..093567022386 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -67,6 +67,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 3236abb0aba9..48e6e8d44a1a 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -107,6 +107,7 @@ interrupts = , ; #dma-cells = <1>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 84d59469035e..9fa11b9f4522 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -167,6 +167,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC2>; clock-names = "apb_pclk"; }; @@ -178,6 +179,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; status = "disabled"; @@ -190,6 +192,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index d929b60517ab..859a7477909f 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -45,6 +45,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; }; @@ -56,6 +57,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMA1>; clock-names = "apb_pclk"; status = "disabled"; @@ -68,6 +70,7 @@ ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMA2>; clock-names = "apb_pclk"; }; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index a5d130bd0547..a1a08cb9364e 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -97,6 +97,7 @@ interrupts = ; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; }; -- cgit v1.2.3 From c2f343510d99ab53b46bdfeb184cb48f622e6943 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:12 +0530 Subject: ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM I2C nodes and associated slave devices defined in Carrier board are specific to rk3399pro vmrac SOM. So, move them into SOM dtsi. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip-radxa-dalang-carrier.dtsi | 32 ---------------------- .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 29 ++++++++++++++++++++ 2 files changed, 29 insertions(+), 32 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index df3712aedf8a..176b53b8e41a 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -17,29 +17,6 @@ status = "okay"; }; -&i2c1 { - status = "okay"; - i2c-scl-rising-time-ns = <140>; - i2c-scl-falling-time-ns = <30>; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - hym8563: hym8563@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - interrupt-parent = <&gpio4>; - interrupts = <30 IRQ_TYPE_LEVEL_LOW>; - }; -}; - &pwm0 { status = "okay"; }; @@ -70,12 +47,3 @@ &uart2 { status = "okay"; }; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = - <4 RK_PD6 0 &pcfg_pull_up>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 0a516334f15f..e11538171e67 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -297,6 +297,29 @@ }; }; +&i2c1 { + i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <140>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio4>; + interrupts = ; + }; +}; + &io_domains { status = "okay"; bt656-supply = <&vcca_1v8>; @@ -324,6 +347,12 @@ }; &pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = -- cgit v1.2.3 From 3047b384a74090f09b994298eb5c40986275233a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:13 +0530 Subject: arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties Fix node, properties sorting on RockPI N10 board dts(i) files. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 2 +- .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 35 +++++++++++----------- 2 files changed, 18 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts index a1783e7f769a..539f4005386d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -8,8 +8,8 @@ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-opp.dtsi" -#include "rk3399pro-vmarc-som.dtsi" #include +#include "rk3399pro-vmarc-som.dtsi" / { model = "Radxa ROCK Pi N10"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index e11538171e67..121a430d6a70 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -76,8 +76,8 @@ &i2c0 { clock-frequency = <400000>; - i2c-scl-rising-time-ns = <180>; i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <180>; status = "okay"; rk809: pmic@20 { @@ -323,8 +323,22 @@ &io_domains { status = "okay"; bt656-supply = <&vcca_1v8>; - sdmmc-supply = <&vccio_sd>; gpio1830-supply = <&vccio_3v0>; + sdmmc-supply = <&vccio_sd>; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; + }; + }; }; &pmu_io_domains { @@ -341,22 +355,7 @@ }; &tsadc { - status = "okay"; rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; -}; - -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC2 0 &pcfg_pull_up>; - }; - }; + status = "okay"; }; -- cgit v1.2.3 From 4a3ca113c0f3a2ce33e51fc6a48a121b2d707d4f Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:14 +0530 Subject: arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier Supply regulators are common across different variants of vmarc SOM's since the Type C power controller IC is part of the carrier board. So, move the supply regulators into carrier board dtsi. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi | 19 +++++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 19 ------------------- 2 files changed, 19 insertions(+), 19 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 176b53b8e41a..00b200a62263 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -11,6 +11,25 @@ chosen { stdout-path = "serial2:1500000n8"; }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 121a430d6a70..d8fa8127d9dc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -18,25 +18,6 @@ clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; }; &cpu_l0 { -- cgit v1.2.3 From a66bd94d0eac017e4846658750acaca2937555bb Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:15 +0530 Subject: arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier Some of gmac, sdmmc node properties are common across rk3288 and rk3399pro SOM's so move them into Carrier dtsi. Chosen node is specific to rk3399pro configure SBC, so move it into RockPI N10 dts. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- .../arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi | 18 ++++++++++++++---- .../boot/dts/rockchip/rk3399pro-rock-pi-n10.dts | 4 ++++ .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 21 +++++---------------- 3 files changed, 23 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 00b200a62263..450e5bb5af0b 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -8,8 +8,11 @@ #include / { - chosen { - stdout-path = "serial2:1500000n8"; + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; }; vcc12v_dcin: vcc12v-dcin-regulator { @@ -33,6 +36,15 @@ }; &gmac { + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; status = "okay"; }; @@ -48,10 +60,8 @@ bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; vqmmc-supply = <&vccio_sd>; - max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts index 539f4005386d..369de5dc0ebd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -15,4 +15,8 @@ model = "Radxa ROCK Pi N10"; compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index d8fa8127d9dc..37ed95d5f7e9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -11,13 +11,6 @@ / { compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; }; &cpu_l0 { @@ -42,17 +35,8 @@ &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; }; &i2c0 { @@ -335,6 +319,11 @@ status = "okay"; }; +&sdmmc { + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + max-frequency = <150000000>; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; -- cgit v1.2.3 From b8c564d4fa76b1314a10585eea8e97b8c621a77a Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:17 +0530 Subject: ARM: dts: rockchip: Add VMARC RK3288 SOM initial support VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - eMMC: 16GB/32GB/64GB - SD slot - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-7-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-vmarc-som.dtsi | 270 ++++++++++++++++++++++++++++++++ 1 file changed, 270 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-vmarc-som.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi new file mode 100644 index 000000000000..cd61b6230f0d --- /dev/null +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Vamrs Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +#include +#include + +/ { + compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; + + vccio_flash: vccio-flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vccio_flash>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + phy-supply = <&vcc_io>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1400000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_tp: LDO_REG1 { + regulator-name = "vcc_tp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_codec: LDO_REG2 { + regulator-name = "vcca_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG3 { + regulator-name = "vdd_10"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_wl: LDO_REG4 { + regulator-name = "vcc_wl"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG7 { + regulator-name = "vcc_18"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-name = "vcc_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&io_domains { + bb-supply = <&vcc_io>; + flash0-supply = <&vccio_flash>; + gpio1830-supply = <&vcc_18>; + gpio30-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + status = "okay"; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, + <6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; + }; + }; +}; -- cgit v1.2.3 From afd9eb88041409e0f311730f23e8fe6921e74cb8 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Wed, 15 Jul 2020 14:04:18 +0530 Subject: ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-rock-pi-n8.dts | 17 +++++++++++++++++ 2 files changed, 18 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-rock-pi-n8.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6a1cac0bfc7..318664fea748 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -974,6 +974,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ + rk3288-rock-pi-n8.dtb \ rk3288-tinker.dtb \ rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ diff --git a/arch/arm/boot/dts/rk3288-rock-pi-n8.dts b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts new file mode 100644 index 000000000000..b19593021713 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Vamrs Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3288.dtsi" +#include +#include "rk3288-vmarc-som.dtsi" + +/ { + model = "Radxa ROCK Pi N8"; + compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som", + "rockchip,rk3288"; +}; -- cgit v1.2.3 From 719646b76a41b8a482f8701825b635e9710ab329 Mon Sep 17 00:00:00 2001 From: Michael Trimarchi Date: Tue, 7 Jul 2020 12:12:14 +0200 Subject: ARM: dts: rockchip: Fix VBUS on rk3288-vyasa Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral". Signed-off-by: Michael Trimarchi Link: https://lore.kernel.org/r/20200707101214.2301768-1-michael@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-vyasa.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index 385dd59393e1..1a20854a1317 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -99,8 +99,6 @@ pinctrl-0 = <&otg_vbus_drv>; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; vin-supply = <&vsus_5v>; }; @@ -416,6 +414,7 @@ }; &usb_otg { + vbus-supply = <&vusb1_5v>; status = "okay"; }; -- cgit v1.2.3 From 947c6ce5ea5d7c30bfcd9a09c2952a849d813d53 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Mon, 13 Jul 2020 09:09:08 +0200 Subject: ARM: dts: kirkwood: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/kirkwood-b3.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 17f48f88a983..a7636fe28501 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -9,7 +9,7 @@ * L2 cache. If your B3 silently fails to boot, u-boot is probably too * old. Either upgrade, or consider the following email: * - * http://lists.debian.org/debian-arm/2012/08/msg00128.html + * https://lists.debian.org/debian-arm/2012/08/msg00128.html */ /dts-v1/; -- cgit v1.2.3 From 43bf2025452d26ba006a7f321daf014cea952c8b Mon Sep 17 00:00:00 2001 From: Daniel González Cabanelas Date: Fri, 26 Jun 2020 20:39:05 +0200 Subject: ARM: dts: dlink-dns327l: fix reg-init PHY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The marvell PHY reg-init registers for the D-Link DNS-327L are wrong. Currently the first field is used to set the page 2, but this is pointless. The usage is not correct, and we are setting the wrong registers. Fix it. Signed-off-by: Daniel González Cabanelas Reviewed-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index baa459dd51e4..2008c6eaaa52 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -247,9 +247,8 @@ &mdio { phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; - marvell,reg-init = <0x0 0x16 0x0 0x0002>, - <0x0 0x19 0x0 0x0077>, - <0x0 0x18 0x0 0x5747>; + marvell,reg-init = <0x2 0x19 0x0 0x0077>, + <0x2 0x18 0x0 0x5747>; }; }; -- cgit v1.2.3 From 83a3545d9c377c8524a238d22258e0319106f080 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Wed, 15 Jul 2020 09:06:49 +0200 Subject: arm64: dts: marvell: add SMMU support Add IOMMU node for Marvell AP806 based SoCs together with platform and PCI device Stream ID mapping. Signed-off-by: Marcin Wojtas Signed-off-by: Tomasz Nowicki Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-7040.dtsi | 28 +++++++++++++++++++ arch/arm64/boot/dts/marvell/armada-8040.dtsi | 40 +++++++++++++++++++++++++++ arch/arm64/boot/dts/marvell/armada-ap80x.dtsi | 18 ++++++++++++ 3 files changed, 86 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index 47247215770d..7a3198cd7a07 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -14,3 +14,31 @@ compatible = "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; }; + +&smmu { + status = "okay"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 7699b19224c2..79e8ce59baa8 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -15,6 +15,18 @@ "marvell,armada-ap806"; }; +&smmu { + status = "okay"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock * in CP master is not connected (by package) to the oscillator. So * disable it. However, the RTC clock in CP slave is connected to the @@ -23,3 +35,31 @@ &cp0_rtc { status = "disabled"; }; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; + +&cp1_sata0 { + iommus = <&smmu 0x454>; +}; + +&cp1_usb3_0 { + iommus = <&smmu 0x450>; +}; + +&cp1_usb3_1 { + iommus = <&smmu 0x451>; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi index 7f9b9a647717..12e477f1aeb9 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -56,6 +56,24 @@ compatible = "simple-bus"; ranges = <0x0 0x0 0xf0000000 0x1000000>; + smmu: iommu@5000000 { + compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; + reg = <0x100000 0x100000>; + dma-coherent; + #iommu-cells = <1>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + ; + status = "disabled"; + }; + gic: interrupt-controller@210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; -- cgit v1.2.3 From 48f36de93a504e63e3b0dadd5b9ea666663e5662 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Fri, 9 Aug 2019 12:28:06 -0700 Subject: arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA Agilex Add clock dts entries to the Intel SoCFPGA Agilex platform. Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 73 ++++++++++++++++++++++ arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 8 +++ 2 files changed, 81 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index f52de8f7806a..e300330536b7 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include #include +#include / { compatible = "intel,socfpga-agilex"; @@ -101,6 +102,40 @@ fpga-mgr = <&fpga_mgr>; }; + clkmgr: clock-controller@ffd10000 { + compatible = "intel,agilex-clkmgr"; + reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + }; + + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -114,6 +149,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; altr,sysmgr-syscon = <&sysmgr 0x44 0>; + clocks = <&clkmgr AGILEX_EMAC0_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -130,6 +167,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; altr,sysmgr-syscon = <&sysmgr 0x48 8>; + clocks = <&clkmgr AGILEX_EMAC1_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -146,6 +185,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; altr,sysmgr-syscon = <&sysmgr 0x4c 16>; + clocks = <&clkmgr AGILEX_EMAC2_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -196,6 +237,7 @@ reg = <0xffc02800 0x100>; interrupts = <0 103 4>; resets = <&rst I2C0_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -206,6 +248,7 @@ reg = <0xffc02900 0x100>; interrupts = <0 104 4>; resets = <&rst I2C1_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -216,6 +259,7 @@ reg = <0xffc02a00 0x100>; interrupts = <0 105 4>; resets = <&rst I2C2_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -226,6 +270,7 @@ reg = <0xffc02b00 0x100>; interrupts = <0 106 4>; resets = <&rst I2C3_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -236,6 +281,7 @@ reg = <0xffc02c00 0x100>; interrupts = <0 107 4>; resets = <&rst I2C4_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -248,6 +294,9 @@ fifo-depth = <0x400>; resets = <&rst SDMMC_RESET>; reset-names = "reset"; + clocks = <&clkmgr AGILEX_L4_MP_CLK>, + <&clkmgr AGILEX_SDMMC_CLK>; + clock-names = "biu", "ciu"; iommus = <&smmu 5>; status = "disabled"; }; @@ -286,6 +335,8 @@ #dma-requests = <32>; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; reset-names = "dma", "dma-ocp"; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; + clock-names = "apb_pclk"; }; rst: rstmgr@ffd11000 { @@ -312,6 +363,9 @@ <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; stream-match-mask = <0x7ff0>; + clocks = <&clkmgr AGILEX_MPU_CCU_CLK>, + <&clkmgr AGILEX_L3_MAIN_FREE_CLK>, + <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -324,6 +378,7 @@ resets = <&rst SPIM0_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -336,6 +391,7 @@ resets = <&rst SPIM1_RESET>; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -357,24 +413,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 113 4>; reg = <0xffc03000 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer1: timer1@ffc03100 { compatible = "snps,dw-apb-timer"; interrupts = <0 114 4>; reg = <0xffc03100 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 115 4>; reg = <0xffd00000 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 116 4>; reg = <0xffd00100 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -385,6 +449,7 @@ reg-io-width = <4>; resets = <&rst UART0_RESET>; status = "disabled"; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; }; uart1: serial1@ffc02100 { @@ -394,6 +459,7 @@ reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART1_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -411,6 +477,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr AGILEX_USB_CLK>; iommus = <&smmu 6>; status = "disabled"; }; @@ -424,6 +491,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; iommus = <&smmu 7>; + clocks = <&clkmgr AGILEX_USB_CLK>; status = "disabled"; }; @@ -432,6 +500,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 117 4>; resets = <&rst WATCHDOG0_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -440,6 +509,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 118 4>; resets = <&rst WATCHDOG1_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -448,6 +518,7 @@ reg = <0xffd00400 0x100>; interrupts = <0 125 4>; resets = <&rst WATCHDOG2_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -456,6 +527,7 @@ reg = <0xffd00500 0x100>; interrupts = <0 126 4>; resets = <&rst WATCHDOG3_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -533,6 +605,7 @@ cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 51d948323bfd..ac6e51b403d8 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -41,6 +41,14 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; }; &gpio1 { -- cgit v1.2.3 From d4ae4dd346cd49302d157b129ead2f60d3a82534 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 30 Jun 2020 13:44:37 -0500 Subject: arm64: dts: agilex: add nand clocks Add the clock properties for the NAND dts node. Signed-off-by: Dinh Nguyen --- arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index e300330536b7..ac1b2422e8d4 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -309,6 +309,10 @@ <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 97 4>; + clocks = <&clkmgr AGILEX_NAND_CLK>, + <&clkmgr AGILEX_NAND_X_CLK>, + <&clkmgr AGILEX_NAND_ECC_CLK>; + clock-names = "nand", "nand_x", "ecc"; resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; status = "disabled"; }; -- cgit v1.2.3 From 0ef91ccdbf49fac8deec0871dacdc74094d44ae0 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 30 Jun 2020 15:18:16 -0500 Subject: arm: dts: socfpga: add reset-names to spi node Add reset-names = "spi" to spi dts nodes. Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 2 ++ arch/arm/boot/dts/socfpga_arria10.dtsi | 2 ++ arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 2 ++ arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 2 ++ 4 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index c2b54af417a2..a5fde3691d42 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -829,6 +829,7 @@ num-cs = <4>; clocks = <&spi_m_clk>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; status = "disabled"; }; @@ -841,6 +842,7 @@ num-cs = <4>; clocks = <&spi_m_clk>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 3b8571b8b412..fe5826805519 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -613,6 +613,7 @@ /*32bit_access;*/ clocks = <&spi_m_clk>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; status = "disabled"; }; @@ -628,6 +629,7 @@ rx-dma-channel = <&pdma 17>; clocks = <&spi_m_clk>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index d1fc9c2055f4..d71961942b5b 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -380,6 +380,7 @@ reg = <0xffda4000 0x1000>; interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; @@ -393,6 +394,7 @@ reg = <0xffda5000 0x1000>; interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index ac1b2422e8d4..9d7f19e97df7 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -380,6 +380,7 @@ reg = <0xffda4000 0x1000>; interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; @@ -393,6 +394,7 @@ reg = <0xffda5000 0x1000>; interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; -- cgit v1.2.3 From 812f5501161151f3c3f4e15f7ef250fc1c3af6a4 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Wed, 15 Jul 2020 13:05:16 -0500 Subject: ARM: dts: socfpga: add the temperature sensor to the Arria10 devkit Add the Maxim max1619 temp sensor that is on the Arria10 devkit. Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 0efbeccc5cd2..7edebe20e859 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -162,6 +162,11 @@ compatible = "ltc2977"; reg = <0x5c>; }; + + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; }; &uart1 { -- cgit v1.2.3 From 208921bae696d92f6a10681cfef2df0bb68f091a Mon Sep 17 00:00:00 2001 From: Nisha Kumari Date: Mon, 22 Jun 2020 18:11:09 +0530 Subject: arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators This patch adds devicetree nodes for LAB and IBB regulators. Signed-off-by: Nisha Kumari [sumits: Updated for better compatible strings and names] Signed-off-by: Sumit Semwal Link: https://lore.kernel.org/r/20200622124110.20971-4-sumit.semwal@linaro.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index 23f9146a161e..d016b12967eb 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -25,5 +25,17 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + ibb: ibb { + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>; + }; + + lab: lab { + interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>; + }; + }; }; }; -- cgit v1.2.3 From 64bf0a0af18d840fc138e10c097cc0ad54f3401a Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Thu, 16 Jul 2020 08:35:55 -0700 Subject: ARM: dts: imx6qdl-gw: add Gateworks System Controller support Add Gateworks System Controller support to Gateworks Ventana boards: - add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers. - add dt bindings for gpio-keys driver for push-button and interrupt events Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 159 ++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 165 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 167 ++++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 147 ++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 153 +++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 164 +++++++++++++++++++++++++++++++-- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 140 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 141 +++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 142 ++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 160 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 148 +++++++++++++++++++++++++++++- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 153 ++++++++++++++++++++++++++++++- 14 files changed, 2076 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 419a7cdc8ab5..7705285d9e3c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -102,6 +150,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -126,13 +271,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -387,6 +525,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 65fe66f0c9ad..a46ea98228c2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -28,6 +29,53 @@ default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -165,6 +213,109 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -189,13 +340,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -505,6 +649,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 545b7831692d..a28e79463d0c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -28,6 +29,53 @@ default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -158,6 +206,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -182,13 +339,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -487,6 +637,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 52fbc6719fab..b5f934b8a239 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include / { @@ -29,6 +30,53 @@ default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -195,6 +243,117 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + }; + + fan-controller@2c { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2c>; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -219,13 +378,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -572,6 +724,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index c38e86eedcc0..ea41875da689 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -47,6 +47,7 @@ #include #include +#include #include / { @@ -63,6 +64,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -167,6 +215,97 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -191,13 +330,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -464,6 +596,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index bb3597132c62..0da6e6f7482b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -20,6 +21,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +140,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -116,13 +261,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -305,6 +443,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index ee85031c3916..db30de5d6490 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -61,6 +62,53 @@ stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -130,11 +178,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio: pca9555@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8a"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0b"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_an1"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { @@ -428,6 +566,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index d295898f1dec..d6b074597518 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -88,6 +88,53 @@ default-on; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -243,6 +290,115 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + + channel@26 { + gw,mode = <1>; + reg = <0x26>; + label = "vdd_gps"; + }; + + channel@29 { + gw,mode = <1>; + reg = <0x29>; + label = "vdd_an2"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -267,13 +423,6 @@ pagesize = <16>; }; - pca9555: gpio@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - ds1672: rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -609,6 +758,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 201c17b15df2..fbe6c32bd756 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { chosen { @@ -71,6 +72,53 @@ default-brightness-level = <100>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -183,11 +231,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index b30c1487252d..23c6e4047621 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -46,6 +46,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -68,6 +69,53 @@ default-brightness-level = <7>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -205,11 +253,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pca9555: gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom1: eeprom@50 { @@ -504,6 +642,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 /* GSC_IRQ# */ >; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index 0bdebddffd51..b1ff7c859c4d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -102,11 +150,101 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_an1"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { @@ -133,7 +271,7 @@ pagesize = <16>; }; - rtc@68 { + ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 0857de505192..11f84ee7b88f 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -22,6 +23,53 @@ reg = <0x10000000 0x20000000>; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -111,11 +159,121 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_3p0"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_arm"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_soc"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p5"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_1p8"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_1p0"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@9c { + gw,mode = <2>; + reg = <0x9c>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 8c57fd2f9a0b..0a1ffff9eb75 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -20,6 +21,53 @@ stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -106,11 +154,109 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + + fan-controller@a { + compatible = "gw,gsc-fan"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0a>; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 635c203bd64d..d62a8da49367 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -4,6 +4,7 @@ */ #include +#include / { /* these are used by bootloader for disabling nodes */ @@ -19,6 +20,53 @@ stdout-path = &uart2; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = ; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -87,11 +135,114 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - gpio@23 { + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@6 { + gw,mode = <0>; + reg = <0x06>; + label = "temp"; + }; + + channel@8 { + gw,mode = <3>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@82 { + gw,mode = <2>; + reg = <0x82>; + label = "vdd_vin"; + gw,voltage-divider-ohms = <22100 1000>; + gw,voltage-offset-microvolt = <800000>; + }; + + channel@84 { + gw,mode = <2>; + reg = <0x84>; + label = "vdd_5p0"; + gw,voltage-divider-ohms = <22100 10000>; + }; + + channel@86 { + gw,mode = <2>; + reg = <0x86>; + label = "vdd_3p3"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@88 { + gw,mode = <2>; + reg = <0x88>; + label = "vdd_2p5"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@8c { + gw,mode = <2>; + reg = <0x8c>; + label = "vdd_arm"; + }; + + channel@8e { + gw,mode = <2>; + reg = <0x8e>; + label = "vdd_soc"; + }; + + channel@90 { + gw,mode = <2>; + reg = <0x90>; + label = "vdd_1p5"; + }; + + channel@92 { + gw,mode = <2>; + reg = <0x92>; + label = "vdd_1p0"; + }; + + channel@98 { + gw,mode = <2>; + reg = <0x98>; + label = "vdd_3p0"; + }; + + channel@9a { + gw,mode = <2>; + reg = <0x9a>; + label = "vdd_an1"; + gw,voltage-divider-ohms = <10000 10000>; + }; + + channel@a2 { + gw,mode = <2>; + reg = <0xa2>; + label = "vdd_gsc"; + gw,voltage-divider-ohms = <10000 10000>; + }; + }; + }; + + gsc_gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; }; eeprom@50 { -- cgit v1.2.3 From 91ea910809953beb95246bc3c933bd4e1bffdf59 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 13 Jul 2020 10:04:15 -0300 Subject: ARM: dts: imx6qdl-sabresd: Add an mdio node imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1. The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. An advantage of adding the mdio node is that the AR8031 initialization code in the mx6sabresd board file in U-Boot can totally be removed. Signed-off-by: Fabio Estevam Reviewed-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 550e22511e34..eaa2146bb937 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -203,9 +203,20 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-handle = <&phy>; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; fsl,magic-packet; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + reg = <1>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { -- cgit v1.2.3 From cfe7d1bd1122a3860ac4f3256c6e8fcba3ae9a2f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 13 Jul 2020 10:04:16 -0300 Subject: ARM: dts: imx6qdl-sabresd: Pass reset-assert-us According to the AR8031 datasheet: "When using crystal, clock is generated internally after the power is stable. In order to get reliable power-on-reset, it is recommended to keep asserting the reset low signal long enough (10 ms) to ensure the clock is stable and clock-to-reset (1 ms) requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam Reviewed-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index eaa2146bb937..68b3e68cb8df 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -204,7 +204,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-handle = <&phy>; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; fsl,magic-packet; status = "okay"; @@ -215,6 +214,8 @@ phy: ethernet-phy@1 { reg = <1>; qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; }; }; }; -- cgit v1.2.3 From 9c852ad98f2c65bca263cf53d46b3eb851713b0e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 13 Jul 2020 10:05:08 -0300 Subject: ARM: dts: imx6q-tbs2910: Add an mdio node imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4. The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now expects the 'qca,clk-out-frequency' property to be passed via device tree. Signed-off-by: Fabio Estevam Reviewed-by: Soeren Moch Tested-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-tbs2910.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index bfff87ce2e1f..1f34028c6397 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -100,7 +100,18 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { -- cgit v1.2.3 From 198cf42cd82f4563baa34fa90aebdf6cfda60a9d Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 13 Jul 2020 10:05:09 -0300 Subject: ARM: dts: imx6q-tbs2910: Pass reset-assert-us According to the AR8035 datasheet: "When using crystal, the clock is generated internally after power is stable. For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam Reviewed-by: Soeren Moch Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-tbs2910.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 1f34028c6397..861e05d53157 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -99,7 +99,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; status = "okay"; @@ -110,6 +109,8 @@ phy: ethernet-phy@4 { reg = <4>; qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; }; }; }; -- cgit v1.2.3 From 7339115a8bee885928a13b9fc066001a5deeb353 Mon Sep 17 00:00:00 2001 From: Biwen Li Date: Tue, 14 Jul 2020 15:08:28 +0800 Subject: arm64: dts: lx2160a-rdb: fix shunt-resistor value Fix value of shunt-resistor property. The LX2160A-RDB has 500 uOhm shunt for the INA220, not 1000 uOhm. Unless it will get wrong power consumption(1/2) Signed-off-by: Biwen Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 22d0308eb13b..54fe8cd3a711 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -121,7 +121,7 @@ power-monitor@40 { compatible = "ti,ina220"; reg = <0x40>; - shunt-resistor = <1000>; + shunt-resistor = <500>; }; }; -- cgit v1.2.3 From 2b4bd73493667a37899b4481dfd2730825d74bf4 Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Wed, 15 Jul 2020 14:31:48 -0700 Subject: ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd" properties. esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property. Signed-off-by: Chris Healy Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index fa5ac9125af7..569614b08f04 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -81,6 +81,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -88,6 +90,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; -- cgit v1.2.3 From 983467bef4519d9ec11c11c8532cd1a5e210ae6c Mon Sep 17 00:00:00 2001 From: Chris Healy Date: Wed, 15 Jul 2020 15:07:58 -0700 Subject: ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog Add I2C child node for switch watchdog present on SPU3 Signed-off-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 801133154e3d..b6b0f302b7b4 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -228,6 +228,18 @@ }; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; +}; + &snvsrtc { status = "disabled"; }; -- cgit v1.2.3 From b3e10b5e40eeb9cf2069d960bd09851103087bb2 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 5 May 2020 11:58:23 -0500 Subject: ARM: dts: aspeed: ast2500: Update XDMA engine node Correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g5.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index de7fd80b022a..9c91afb2b404 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ #include +#include / { model = "Aspeed BMC"; @@ -267,8 +268,8 @@ reg = <0x1e6e7000 0x100>; clocks = <&syscon ASPEED_CLK_GATE_BCLK>; resets = <&syscon ASPEED_RESET_XDMA>; - interrupts-extended = <&vic 6>, <&scu_ic 2>; - pcie-device = "bmc"; + interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>; + aspeed,pcie-device = "bmc"; aspeed,scu = <&syscon>; status = "disabled"; }; -- cgit v1.2.3 From 645afe73f9512ee2fc636b741cacd23a513eb8d6 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 5 May 2020 11:58:22 -0500 Subject: ARM: dts: aspeed: ast2600: Update XDMA engine node Add the PCI-E root complex reset, correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-g6.dtsi | 15 +++------------ 1 file changed, 3 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 9d8d8e18bc90..b58220a49cbd 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -2,6 +2,7 @@ // Copyright 2019 IBM Corp. #include +#include #include / { @@ -346,22 +347,12 @@ resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>; reset-names = "device", "root-complex"; interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, - <&scu_ic0 2>; - pcie-device = "bmc"; + <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>; + aspeed,pcie-device = "bmc"; aspeed,scu = <&syscon>; status = "disabled"; }; - video: video@1e700000 { - compatible = "aspeed,ast2600-video-engine"; - reg = <0x1e700000 0x1000>; - clocks = <&syscon ASPEED_CLK_GATE_VCLK>, - <&syscon ASPEED_CLK_GATE_ECLK>; - clock-names = "vclk", "eclk"; - interrupts = ; - status = "disabled"; - }; - gpio0: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; -- cgit v1.2.3 From 67268c28cc5f478e81022ebc37d6323dc68f7047 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 5 May 2020 11:58:24 -0500 Subject: ARM: dts: aspeed: witherspoon: Enable XDMA engine Add a reserved memory node for the VGA memory. Add the XDMA engine node, enable it, and point it's memory region to the VGA memory. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index a0f99e34ac8e..85d58a63ae90 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -27,6 +27,12 @@ reg = <0x98000000 0x04000000>; /* 64M */ }; + vga_memory: region@9f000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + gfx_memory: framebuffer { size = <0x01000000>; alignment = <0x01000000>; @@ -690,4 +696,9 @@ memory-region = <&video_engine_memory>; }; +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; + #include "ibm-power9-dual.dtsi" -- cgit v1.2.3 From 965e0e26d62b850ab2ae4401e76cde06e9dc3656 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 5 May 2020 11:58:25 -0500 Subject: ARM: dts: aspeed: tacoma: Enable XDMA engine Add a reserved memory node for the VGA memory. Add the XDMA engine node, enable it, and point it's memory region to the VGA memory. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 13c4aa02f4de..61d7fd913b5e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -29,6 +29,12 @@ no-map; reg = <0xb8000000 0x4000000>; /* 64M */ }; + + vga_memory: region@bf000000 { + no-map; + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + }; }; gpio-keys { @@ -912,3 +918,8 @@ pinctrl-0 = <&pinctrl_lpc_default>, <&pinctrl_lsirq_default>; }; + +&xdma { + status = "okay"; + memory-region = <&vga_memory>; +}; -- cgit v1.2.3 From fafc991c887e69cd53ace00e436a844653327110 Mon Sep 17 00:00:00 2001 From: Ben Tyner Date: Mon, 1 Jun 2020 13:20:22 -0500 Subject: ARM: dts: aspeed: tacoma: Remove checkstop gpio-key The attention handler will monitor the checkstop gpio via the character device interface so it needs to not be defined. Signed-off-by: Ben Tyner Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 61d7fd913b5e..ff1538cf9d51 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -40,12 +40,6 @@ gpio-keys { compatible = "gpio-keys"; - checkstop { - label = "checkstop"; - gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - ps0-presence { label = "ps0-presence"; gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; -- cgit v1.2.3 From 080f88e8400bffeb24afba53c9b43f85ed71e76f Mon Sep 17 00:00:00 2001 From: Ben Tyner Date: Fri, 29 May 2020 12:22:00 -0500 Subject: ARM: dts: aspeed: rainier: Add line-name checkstop Rainier uses GPIO B6 as the checkstop GPIO. Define the line-name so that this GPIO can be found by name. Signed-off-by: Ben Tyner Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 919b895846c6..4d3b7c7edb2e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -73,7 +73,7 @@ &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", - /*B0-B7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","checkstop","", /*C0-C7*/ "","","","","","","","", /*D0-D7*/ "","","","","","","","", /*E0-E7*/ "","","","","","","","", -- cgit v1.2.3 From 1b36c0d0eb566cf7a296a8684d8fb91158c7c3eb Mon Sep 17 00:00:00 2001 From: Eddie James Date: Thu, 9 Jan 2020 14:08:39 -0600 Subject: ARM: dts: aspeed: rainier: Add second cfam on the hub The hub FSI master can access the cfams on two other processors. Reflect this by adding a second cfam to the first hub description. Signed-off-by: Eddie James Tested-by: Andrew Geissler Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 36 ++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 4d3b7c7edb2e..2f57d8d431b4 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -183,6 +183,38 @@ no-scan-on-init; }; }; + + cfam@2,0 { + reg = <2 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <2>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ2: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub2: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; }; /* Legacy OCC numbering (to get rid of when userspace is fixed) */ @@ -194,6 +226,10 @@ reg = <2>; }; +&fsi_occ2 { + reg = <3>; +}; + &ibt { status = "okay"; }; -- cgit v1.2.3 From 1daa0147f113a61f2bde2d1dcb4c1d919483dbe5 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Tue, 5 May 2020 16:57:42 +0930 Subject: ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP GPIOP7 is used in the Rainier design to manage the state of a microcontroller elsewhere in the system but its ball, Y23, is the driver of the heartbeat LED on the ast2600-evb and the SoC defaults Y23 at power-on to the pulse-train behaviour used to drive the LED. This causes much confusion for the micro in the Rainier system, so hog the line as early as possible. Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 2f57d8d431b4..ac7cc96a15d3 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -102,6 +102,13 @@ /*AA0-AA7*/ "","","","","","","","", /*AB0-AB7*/ "","","","","","","","", /*AC0-AC7*/ "","","","","","","",""; + + pin_mclr_vpp { + gpio-hog; + gpios = ; + output-high; + line-name = "mclr_vpp"; + }; }; &emmc_controller { -- cgit v1.2.3 From 0ce0581e6d32040696effd1b2298618c3aa3a595 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Thu, 9 Jul 2020 19:25:04 +0930 Subject: ARM: dts: aspeed: tacoma: Fix gpio-key definitions This patch was applied twice. Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 59 ----------------------------- 1 file changed, 59 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index ff1538cf9d51..b70087c591da 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -84,65 +84,6 @@ }; }; - gpio-keys { - compatible = "gpio-keys"; - - air-water { - label = "air-water"; - gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - checkstop { - label = "checkstop"; - gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ps0-presence { - label = "ps0-presence"; - gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - ps1-presence { - label = "ps1-presence"; - gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <1000>; - - fan0-presence { - label = "fan0-presence"; - gpios = <&pca0 4 GPIO_ACTIVE_LOW>; - linux,code = <4>; - }; - - fan1-presence { - label = "fan1-presence"; - gpios = <&pca0 5 GPIO_ACTIVE_LOW>; - linux,code = <5>; - }; - - fan2-presence { - label = "fan2-presence"; - gpios = <&pca0 6 GPIO_ACTIVE_LOW>; - linux,code = <6>; - }; - - fan3-presence { - label = "fan3-presence"; - gpios = <&pca0 7 GPIO_ACTIVE_LOW>; - linux,code = <7>; - }; - }; - iio-hwmon-dps310 { compatible = "iio-hwmon"; io-channels = <&dps 0>; -- cgit v1.2.3 From 9ff416cf45a08f28167b75045222c762a0347930 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 14 Jul 2020 08:47:59 +0200 Subject: ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family Commit 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") changed the parameters of the OPPs for the FSYS bus. Besides the frequency adjustments, it also removed the 'shared-opp' property from the OPP table used for FSYS_APB and FSYS busses. This revealed that in fact the FSYS bus frequency scaling never worked. When one OPP table is marked as 'opp-shared', only the first bus which selects the OPP sets the rate of its clock. Then OPP core assumes that the other busses have been changed to that OPP and no change to their clock rates are needed. Thus when FSYS_APB bus, which was registered first, set the rate for its clock, the OPP core did not change the FSYS bus clock later. The mentioned commit removed that behavior, what introduced a regression on some Odroid XU3 boards. Frequency scaling of the FSYS bus causes instability of the USB host operation, what can be observed as network hangs. To restore old behavior, simply disable frequency scaling for the FSYS bus. Reported-by: Willy Wolff Fixes: 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index ab27ff8bc3dc..afe090578e8f 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -411,12 +411,6 @@ status = "okay"; }; -&bus_fsys { - operating-points-v2 = <&bus_fsys2_opp_table>; - devfreq = <&bus_wcore>; - status = "okay"; -}; - &bus_fsys2 { operating-points-v2 = <&bus_fsys2_opp_table>; devfreq = <&bus_wcore>; -- cgit v1.2.3 From 537b91180dc296a95454287792e2c59baec60af5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 19 Jul 2020 22:16:02 +0200 Subject: ARM: dts: ux500-skomer: Correct accel mounting matrix This corrects the mounting matrix for the BMA254 accelerometer to what makes PostmarketOS actually orient the screen the right way on this device. Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20200719201603.3610389-1-linus.walleij@linaro.org --- arch/arm/boot/dts/ste-ux500-samsung-skomer.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 8edef161613a..d6f6ac04a48a 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -349,8 +349,8 @@ interrupt-parent = <&gpio7>; interrupts = <0 IRQ_TYPE_EDGE_RISING>; - mount-matrix = "0", "1", "0", - "-1", "0", "0", + mount-matrix = "0", "-1", "0", + "1", "0", "0", "0", "0", "1"; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&ab8500_ldo_aux8_reg>; -- cgit v1.2.3 From 7dbf4bbf1c320d82058878bd44805724d171e1e8 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Sat, 18 Jul 2020 01:36:44 +0200 Subject: ARM: dts: at91: sama5d3_xplained: change phy-mode Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY"), networking is broken on sama5d3 xplained. The device tree has phy-mode = "rgmii" and this worked before, because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20200717233644.841080-1-alexandre.belloni@bootlin.com --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 61f068a7b362..7abf555cd2fe 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -128,7 +128,7 @@ }; macb0: ethernet@f0028000 { - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; #address-cells = <1>; #size-cells = <0>; status = "okay"; -- cgit v1.2.3 From 82e935721f9db48cd0faca47da348496eeab28ff Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:46 +0800 Subject: ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores The device tree currently only assigns the a supply for the first CPU core, when in reality the regulator supply is shared by all four cores. This might cause an issue if the implementation does not realize the sharing of the supply. Assign the same regulator supply to the remaining CPU cores to address this. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-2-wens@kernel.org --- arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi index 19b3b23cfaa8..c44fd726945a 100644 --- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi +++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi @@ -128,6 +128,18 @@ cpu-supply = <®_vdd_cpux>; }; +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; + &de { status = "okay"; }; -- cgit v1.2.3 From 55b271af765b0e03d1ff29502f81644b1a3c87fd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:47 +0800 Subject: ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores The device tree currently only assigns the a supply for the first CPU core, when in reality the regulator supply is shared by all four cores. This might cause an issue if the implementation does not realize the sharing of the supply. Assign the same regulator supply to the remaining CPU cores to address this. Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org --- arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index 22466afd38a3..a628b5ee72b6 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -28,3 +28,15 @@ &cpu0 { cpu-supply = <®_vdd_cpux>; }; + +&cpu1 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu2 { + cpu-supply = <®_vdd_cpux>; +}; + +&cpu3 { + cpu-supply = <®_vdd_cpux>; +}; -- cgit v1.2.3 From e4dae01bf08b754de79072441c357737220b873f Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:48 +0800 Subject: ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages The Bananapi M2+ uses a GPIO line to change the effective resistance of the CPU supply regulator's feedback resistor network. The voltages described in the device tree were given directly by the vendor. This turns out to be slightly off compared to the real values. The updated voltages are based on calculations of the feedback resistor network, and verified down to three decimal places with a multi-meter. Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org --- arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi index a628b5ee72b6..235994a4a2eb 100644 --- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -16,12 +16,12 @@ regulator-type = "voltage"; regulator-boot-on; regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1300000>; + regulator-min-microvolt = <1108475>; + regulator-max-microvolt = <1308475>; regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0>, <1300000 1>; + states = <1108475 0>, <1308475 1>; }; }; -- cgit v1.2.3 From 5fa21c1354c93cb9fe8239545b17eee46e39dd69 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:49 +0800 Subject: arm64: dts: allwinner: h5: Add clock to CPU cores The ARM CPU cores are fed by the CPU clock from the CCU. Add a reference to the clock for each CPU core, along with the clock transition latency. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-5-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 4462a68c0681..09523f6011c5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -13,6 +13,8 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ }; cpu1: cpu@1 { @@ -20,6 +22,8 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ }; cpu2: cpu@2 { @@ -27,6 +31,8 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ }; cpu3: cpu@3 { @@ -34,6 +40,8 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ }; }; -- cgit v1.2.3 From d04f7bc8842c0d9951a5740480f864a4f82d6b63 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:50 +0800 Subject: arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones This enables passive cooling by down-regulating CPU voltage and frequency. The trip points were copied from the H3. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index 09523f6011c5..6735e316a39c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -3,6 +3,8 @@ #include +#include + / { cpus { #address-cells = <1>; @@ -15,6 +17,7 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -24,6 +27,7 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -33,6 +37,7 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -42,6 +47,7 @@ enable-method = "psci"; clocks = <&ccu CLK_CPUX>; clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; }; @@ -173,6 +179,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal { -- cgit v1.2.3 From 7240598ba4e6c477c6809dc019505cf366fdb7c0 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:51 +0800 Subject: arm64: dts: allwinner: h5: Add CPU Operating Performance Points table Add an OPP (Operating Performance Points) table for the CPU cores for boards to include to DVFS (Dynamic Voltage & Frequency Scaling) on the H5. The table originates from Armbian, but the maximum voltage is raised slightly to account for boards using slightly higher voltages. The table and tie in to the CPU cores are put in a separate dtsi file that board files can include to opt in. Or they can define their own tables if the standard one does not fit. This has been tested on the Libre Computer ALL-H3-CC-H5 and the Bananapi M2+ v1.2 H5, both with adequate cooling. The former has a fixed 1.2V regulator, while the latter has a GPIO controlled regulator switchable between 1.1V and 1.3V. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-7-wens@kernel.org --- .../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi | 79 ++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi new file mode 100644 index 000000000000..b2657201957e --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai + +/ { + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <1000000 1000000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000 1040000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1080000 1080000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000 1120000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000 1160000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000 1200000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000 1240000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000 1260000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000 1300000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu_opp_table>; +}; -- cgit v1.2.3 From c4118403d1c95bbb4a23526dece7eadcbe96e061 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:52 +0800 Subject: arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs The Libre Computer ALL-H3-CC H5 variant can work with the standard H5 OPPs. Tie them in to enable CPU frequency scaling. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts index 64d35daf2023..d811df332824 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include / { -- cgit v1.2.3 From bc6b31c53ce895977841598721f8daeabc070ced Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 18 Jul 2020 00:00:53 +0800 Subject: arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs. Tie them in to enable CPU frequency scaling. The original Bananapi M2 Plus H5 is left out for now, as adding the fixed regulator along with the enable pin seemed to cause some glitching in Linux. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org --- arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts index 2e2b14c0ae75..8857a3791593 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include / { -- cgit v1.2.3 From f37b5d3aef8db06390cb7ef25585b39f89c1dedf Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Sun, 19 Jul 2020 11:39:39 +0200 Subject: ARM: dts: exynos: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index 369a8a7f2105..e5d0a2a4f648 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -3,7 +3,7 @@ * Exynos5410 SoC pin-mux and pin-config device tree source * * Copyright (c) 2013 Hardkernel Co., Ltd. - * http://www.hardkernel.com + * https://www.hardkernel.com */ #include -- cgit v1.2.3 From d57c69ca6d4ab890e8edac5c8e10c7c2b54d500c Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Sat, 18 Jul 2020 05:45:05 +0000 Subject: arm64: dts: meson: update spifc node name on Khadas VIM3/VIM3L The VIM3/VIM3L Boards use w25q128 not w25q32 - this is a cosmetic change only - the device probes fine with the current device-tree. Fixes: 0e1610e726d3 ("arm64: dts: khadas-vim3: add SPIFC controller node") Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20200718054505.4165-1-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 27408c10a811..6b75157265e1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -360,7 +360,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q128: spi-flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q128fw", "jedec,spi-nor"; -- cgit v1.2.3 From a6d1a6328b126b8417d2464ffa1d8424cfbe0c31 Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Tue, 16 Jun 2020 17:33:29 +0200 Subject: ARM: dts: stm32: cosmetic updates in stm32mp15-pinctrl Use tabs where possible and remove multiple blanks lines. Signed-off-by: Patrick Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index fb98a66977fe..e63d85c66b3d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -210,8 +210,8 @@ , /* ETH_RGMII_TXD3 */ , /* ETH_RGMII_TX_CTL */ , /* ETH_MDC */ - , /* ETH_MDIO */ - , /* ETH_RGMII_RXD0 */ + , /* ETH_MDIO */ + , /* ETH_RGMII_RXD0 */ , /* ETH_RGMII_RXD1 */ , /* ETH_RGMII_RXD2 */ , /* ETH_RGMII_RXD3 */ @@ -453,7 +453,7 @@ i2c5_pins_b: i2c5-1 { pins { pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ + ; /* I2C5_SDA */ bias-disable; drive-open-drain; slew-rate = <0>; @@ -463,7 +463,7 @@ i2c5_sleep_pins_b: i2c5-sleep-1 { pins { pinmux = , /* I2C5_SCL */ - ; /* I2C5_SDA */ + ; /* I2C5_SDA */ }; }; @@ -1072,7 +1072,6 @@ }; }; - sai2a_pins_b: sai2a-1 { pins1 { pinmux = , /* SAI2_SD_A */ -- cgit v1.2.3 From 842ed898a757928c42281ce65f505029c5c837a9 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 18 Jun 2020 15:06:47 +0200 Subject: ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl Adds usart2_pins_c, usart3_pins_b, usart3_pins_c and uart7_pins_c pins configurations in stm32mp15-pinctrl. - usart2_pins_c pins are connected to Bluetooth chip on dk2 board. - usart3_pins_b pins are connected to GPIO expansion connector on evx board. - usart3_pins_c pins are connected to GPIO expansion connector on dkx board. - uart7_pins_c pins are connected to Arduino Uno connector on dkx board. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 138 +++++++++++++++++++++++++++++++ 1 file changed, 138 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index e63d85c66b3d..8d7cb326ebb8 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1657,6 +1657,36 @@ }; }; + uart7_pins_c: uart7-2 { + pins1 { + pinmux = ; /* UART7_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + + uart7_idle_pins_c: uart7-idle-2 { + pins1 { + pinmux = ; /* UART7_TX */ + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-disable; + }; + }; + + uart7_sleep_pins_c: uart7-sleep-2 { + pins { + pinmux = , /* UART7_TX */ + ; /* UART7_RX */ + }; + }; + uart8_pins_a: uart8-0 { pins1 { pinmux = ; /* UART8_TX */ @@ -1718,6 +1748,42 @@ }; }; + usart2_pins_c: usart2-2 { + pins1 { + pinmux = , /* USART2_TX */ + ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins2 { + pinmux = , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + usart2_idle_pins_c: usart2-idle-2 { + pins1 { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + ; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART2_RX */ + bias-disable; + }; + }; + + usart2_sleep_pins_c: usart2-sleep-2 { + pins { + pinmux = , /* USART2_TX */ + , /* USART2_RTS */ + , /* USART2_RX */ + ; /* USART2_CTS_NSS */ + }; + }; + usart3_pins_a: usart3-0 { pins1 { pinmux = ; /* USART3_TX */ @@ -1731,6 +1797,78 @@ }; }; + usart3_pins_b: usart3-1 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usart3_idle_pins_b: usart3-idle-1 { + pins1 { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_b: usart3-sleep-1 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; + + usart3_pins_c: usart3-2 { + pins1 { + pinmux = , /* USART3_TX */ + ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = , /* USART3_RX */ + ; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usart3_idle_pins_c: usart3-idle-2 { + pins1 { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + ; /* USART3_CTS_NSS */ + }; + pins2 { + pinmux = ; /* USART3_RX */ + bias-disable; + }; + }; + + usart3_sleep_pins_c: usart3-sleep-2 { + pins { + pinmux = , /* USART3_TX */ + , /* USART3_RTS */ + , /* USART3_CTS_NSS */ + ; /* USART3_RX */ + }; + }; + usbotg_hs_pins_a: usbotg-hs-0 { pins { pinmux = ; /* OTG_ID */ -- cgit v1.2.3 From ec847908966ed24b232e1f72cbdef85115ea684d Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 18 Jun 2020 15:06:48 +0200 Subject: ARM: dts: stm32: add usart3 node to stm32mp15xx-dkx boards Adds usart3 node to stm32mp15xx-dkx and usart3 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157a-dk1.dts | 1 + arch/arm/boot/dts/stm32mp157c-dk2.dts | 1 + arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 9 +++++++++ 3 files changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index d03d4cd2606a..65ee61b7667a 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -18,6 +18,7 @@ aliases { ethernet0 = ðernet0; serial0 = &uart4; + serial1 = &usart3; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index 9a8a26710ac1..fb690a817e28 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -19,6 +19,7 @@ aliases { ethernet0 = ðernet0; serial0 = &uart4; + serial1 = &usart3; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index dd5cef55d3ed..c562e181c2b1 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -591,6 +591,15 @@ status = "okay"; }; +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_c>; + pinctrl-1 = <&usart3_sleep_pins_c>; + pinctrl-2 = <&usart3_idle_pins_c>; + uart-has-rtscts; + status = "disabled"; +}; + &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; -- cgit v1.2.3 From afc0666d03af36298ad5516b38699f33f5efee78 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 18 Jun 2020 15:06:49 +0200 Subject: ARM: dts: stm32: add usart3 node to stm32mp157c-ev1 Adds the usart3 node to stm32mp157c-ev1 board. usart3 pins are connected to GPIO Expansion connector. usart3 is disabled by default. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-ev1.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index b19056557ef0..85628e16d2d5 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -19,6 +19,7 @@ aliases { serial0 = &uart4; + serial1 = &usart3; ethernet0 = ðernet0; }; @@ -341,6 +342,20 @@ }; }; +&usart3 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart3_pins_b>; + pinctrl-1 = <&usart3_sleep_pins_b>; + pinctrl-2 = <&usart3_idle_pins_b>; + /* + * HW flow control USART3_RTS is optional, and isn't default wired to + * the connector. SB23 needs to be soldered in order to use it, and R77 + * (ETH_CLK) should be removed. + */ + uart-has-rtscts; + status = "disabled"; +}; + &usbh_ehci { phys = <&usbphyc_port0>; status = "okay"; -- cgit v1.2.3 From f74c7be7ce431e1b94d05698b1786b4859c8bba6 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 18 Jun 2020 15:06:50 +0200 Subject: ARM: dts: stm32: add uart7 support to stm32mp15xx-dkx boards Adds uart7 node to stm32mp15xx-dkx and uart7 alias to stm32mp157a-dk1 and stm32mp157c-dk2 boards. uart7 pins are connected to Arduino connector. uart7 is disabled by default. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157a-dk1.dts | 1 + arch/arm/boot/dts/stm32mp157c-dk2.dts | 1 + arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 8 ++++++++ 3 files changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index 65ee61b7667a..4c8be9c8eb20 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -19,6 +19,7 @@ ethernet0 = ðernet0; serial0 = &uart4; serial1 = &usart3; + serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index fb690a817e28..ffbae4a8753d 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -20,6 +20,7 @@ ethernet0 = ðernet0; serial0 = &uart4; serial1 = &usart3; + serial2 = &uart7; }; chosen { diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index c562e181c2b1..493f3b1112e1 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -591,6 +591,14 @@ status = "okay"; }; +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_c>; + pinctrl-1 = <&uart7_sleep_pins_c>; + pinctrl-2 = <&uart7_idle_pins_c>; + status = "disabled"; +}; + &usart3 { pinctrl-names = "default", "sleep", "idle"; pinctrl-0 = <&usart3_pins_c>; -- cgit v1.2.3 From c622308f8adf3e51460a2a5fe543602ddb5cbf38 Mon Sep 17 00:00:00 2001 From: Erwan Le Ray Date: Thu, 18 Jun 2020 15:06:51 +0200 Subject: ARM: dts: stm32: add usart2 node to stm32mp157c-dk2 Adds the usart2 node to stm32mp157c-dk2 board. usart2 pins are connected to Bluetooth component. usart2 is disabled by default. Signed-off-by: Erwan Le Ray Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp157c-dk2.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts index ffbae4a8753d..045636555ddd 100644 --- a/arch/arm/boot/dts/stm32mp157c-dk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts @@ -21,6 +21,7 @@ serial0 = &uart4; serial1 = &usart3; serial2 = &uart7; + serial3 = &usart2; }; chosen { @@ -86,3 +87,11 @@ }; }; }; + +&usart2 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_c>; + pinctrl-1 = <&usart2_sleep_pins_c>; + pinctrl-2 = <&usart2_idle_pins_c>; + status = "disabled"; +}; -- cgit v1.2.3 From 164c10aed934332390826cae45ad81ad0fef39cb Mon Sep 17 00:00:00 2001 From: Fabrice Gasnier Date: Tue, 23 Jun 2020 11:31:12 +0200 Subject: ARM: dts: stm32: configure i2c5 support on stm32mp15xx-dkx Configure I2C5 on stm32mp15 DK boards. It's available and can be used on: - Arduino connector - GPIO expansion connector Keep it disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Signed-off-by: Fabrice Gasnier Signed-off-by: Alain Volmat Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 493f3b1112e1..62b1e71fc7eb 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -365,6 +365,19 @@ }; }; +&i2c5 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_sleep_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + status = "disabled"; +}; + &i2s2 { clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; clock-names = "pclk", "i2sclk", "x8k", "x11k"; -- cgit v1.2.3 From 4fe663890ac5b3b099f458b20cce13fe8efec12b Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 8 Jul 2020 13:43:24 +0200 Subject: ARM: dts: stm32: Fix spi4 pins in stm32mp15-pinctrl Move spi4_pins_a nodes from pinctrl_z to pinctrl as the associated pins are not in BANK Z. Fixes: 498a7014989d ("ARM: dts: stm32: Add missing pinctrl entries for STM32MP15") Signed-off-by: Patrick Delaunay Reviewed-by: Manivannan Sadhasivam Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 8d7cb326ebb8..b5a66429670c 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1700,6 +1700,20 @@ }; }; + spi4_pins_a: spi4-0 { + pins { + pinmux = , /* SPI4_SCK */ + ; /* SPI4_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = ; /* SPI4_MISO */ + bias-disable; + }; + }; + usart2_pins_a: usart2-0 { pins1 { pinmux = , /* USART2_TX */ @@ -1930,18 +1944,4 @@ bias-disable; }; }; - - spi4_pins_a: spi4-0 { - pins { - pinmux = , /* SPI4_SCK */ - ; /* SPI4_MOSI */ - bias-disable; - drive-push-pull; - slew-rate = <1>; - }; - pins2 { - pinmux = ; /* SPI4_MISO */ - bias-disable; - }; - }; }; -- cgit v1.2.3 From 133e6acfaee665aa2e0292e0594337fd616b4924 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 3 Jul 2020 11:55:17 +0200 Subject: ARM: dts: stm32: Add compatibles for syscon for stm32f426 Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f429.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 39ecdaacac4d..ad715a0e1c9a 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -597,8 +597,8 @@ status = "disabled"; }; - syscfg: system-config@40013800 { - compatible = "syscon"; + syscfg: syscon@40013800 { + compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; }; @@ -688,7 +688,7 @@ }; pwrcfg: power-config@40007000 { - compatible = "syscon"; + compatible = "st,stm32-power-config", "syscon"; reg = <0x40007000 0x400>; }; -- cgit v1.2.3 From ae2268696f0e36bf11d0262282d66bb42270835a Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 3 Jul 2020 11:55:18 +0200 Subject: ARM: dts: stm32: Add compatibles for syscon for stm32f746 Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32f746.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index 5d69a0c653eb..640ff54ed00c 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -495,8 +495,8 @@ status = "disabled"; }; - syscfg: system-config@40013800 { - compatible = "syscon"; + syscfg: syscon@40013800 { + compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; }; @@ -563,7 +563,7 @@ }; pwrcfg: power-config@40007000 { - compatible = "syscon"; + compatible = "st,stm32-power-config", "syscon"; reg = <0x40007000 0x400>; }; -- cgit v1.2.3 From 1f96adbb720f920e84332c8e29ba59fa97b00721 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 3 Jul 2020 11:55:19 +0200 Subject: ARM: dts: stm32: Add compatibles for syscon for stm32h743 Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32h743.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index d22295285113..69e2f1e78ed6 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -361,8 +361,8 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>; }; - syscfg: system-config@58000400 { - compatible = "syscon"; + syscfg: syscon@58000400 { + compatible = "st,stm32-syscfg", "syscon"; reg = <0x58000400 0x400>; }; @@ -501,7 +501,7 @@ }; pwrcfg: power-config@58024800 { - compatible = "syscon"; + compatible = "st,stm32-power-config", "syscon"; reg = <0x58024800 0x400>; }; -- cgit v1.2.3 From a656ae15e9ce203c45a68b8d517bf006851fe0b2 Mon Sep 17 00:00:00 2001 From: Benjamin Gaignard Date: Fri, 3 Jul 2020 11:55:20 +0200 Subject: ARM: dts: stm32: Add compatibles for syscon for stm32mp151 Syscon nodes needs at least 2 compatibles to be compliant why yaml documentation. Signed-off-by: Benjamin Gaignard Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp151.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 3faaa2e23224..bfe29023fbd5 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1127,7 +1127,7 @@ }; pwr_mcu: pwr_mcu@50001014 { - compatible = "syscon"; + compatible = "st,stm32mp151-pwr-mcu", "syscon"; reg = <0x50001014 0x4>; }; -- cgit v1.2.3 From d9b6b5150fba262ca36c01470a4e188b142fe39a Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Tue, 16 Jun 2020 16:07:17 +0200 Subject: ARM: dts: stm32: enable usb-role-switch on USB OTG on stm32mp15xx-dkx Now that USB OTG driver supports usb role switch by overriding PHY input signals (A-Valid, B-Valid and Vbus-Valid), enable it on stm32mp15xx-dkx. dr_mode needn't to be forced to Peripheral anymore, it is set to OTG in SoC device tree. USB role (USB_ROLE_NONE, USB_ROLE_DEVICE, USB_ROLE_HOST) will be provided by STUSB1600 Type-C controller driver. This patch depends on "Add STUSB160x Type-C port controller support" series, which is under review. Signed-off-by: Amelie Delaunay Signed-off-by: Alexandre Torgue --- arch/arm/boot/dts/stm32mp15xx-dkx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index 62b1e71fc7eb..a5307745719a 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -627,9 +627,9 @@ }; &usbotg_hs { - dr_mode = "peripheral"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; + usb-role-switch; status = "okay"; }; -- cgit v1.2.3 From 725da67ce4d77540d4d6f7ecc3ac5a885a684716 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Sat, 18 Jul 2020 07:25:31 +0000 Subject: arm64: dts: meson: add audio playback to odroid-c4 Add initial audio support limited to HDMI i2s. Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Acked-by: Jerome Brunet Link: https://lore.kernel.org/r/20200718072532.8427-2-christianshewitt@gmail.com --- .../arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 88 ++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index 00d90b30f8b4..cf5a98f0e47c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -8,6 +8,7 @@ #include "meson-sm1.dtsi" #include #include +#include / { compatible = "hardkernel,odroid-c4", "amlogic,sm1"; @@ -186,6 +187,69 @@ }; }; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-ODROID-C4"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; }; &cpu0 { @@ -237,6 +301,18 @@ amlogic,tx-delay-ns = <2>; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &gpio { gpio-line-names = /* GPIOZ */ @@ -381,6 +457,18 @@ vqmmc-supply = <&flash_1v8>; }; +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- cgit v1.2.3 From b8b85d01be916a30c9863a5456c218d802e01d97 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Sat, 18 Jul 2020 07:25:32 +0000 Subject: arm64: dts: meson: add audio playback to khadas-vim3l Add initial audio support limited to HDMI i2s, copying the config from the existing VIM3 device-tree. Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Acked-by: Jerome Brunet Link: https://lore.kernel.org/r/20200718072532.8427-3-christianshewitt@gmail.com --- .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 88 ++++++++++++++++++++++ 1 file changed, 88 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index dbbf29a0dbf6..b104967dbef1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -8,6 +8,7 @@ #include "meson-sm1.dtsi" #include "meson-khadas-vim3.dtsi" +#include / { compatible = "khadas,vim3l", "amlogic,sm1"; @@ -31,6 +32,69 @@ regulator-boot-on; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-KHADAS-VIM3L"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; }; &cpu0 { @@ -61,6 +125,18 @@ clock-latency = <50000>; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &pwm_AO_cd { pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; @@ -93,3 +169,15 @@ phy-names = "usb2-phy0", "usb2-phy1"; }; */ + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; -- cgit v1.2.3 From ea232b9ccccf2f55fe231441f3908c31c7136c4f Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Sun, 19 Jul 2020 02:14:21 +0000 Subject: arm64: dts: meson: add support for the WeTek Core 2 The WeTek Core2 is a commercial device based on the Amlogic Q200 reference design but with the following differences: - 3GB RAM, 32GB eMMC - Blue and Red LEDs used to signal on/off status - uart_AO can be accessed after opening the case; soldering required - USB OTG is not accessible (inside the case) - Realtek RTL8152 Ethernet (internal USB connection) Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200719021421.7959-3-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-gxm-wetek-core2.dts | 87 ++++++++++++++++++++++ 2 files changed, 88 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 5cac4d1d487d..4e2239ffcaa5 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts new file mode 100644 index 000000000000..ec794c134c15 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Christian Hewitt + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include +#include + +/ { + compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; + model = "WeTek Core 2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-update { + label = "update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button-power { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Disabled as Realtek RTL8152 USB provides Ethernet */ +ðmac { + status = "disabled"; +}; + +&internal_phy { + status = "disabled"; +}; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; -- cgit v1.2.3 From 46ffadc7e658277d7559899d7f641f14a3cfae8c Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Jul 2020 19:32:11 +0200 Subject: arm64: dts: amlogic: meson-gx: add the Mali-450 OPP table and use DVFS Add the OPP table for the Mali-450 GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Set the GP0_PLL clock to 744MHz (which is the only frequency which cannot be derived from the FCLK dividers) as the clock driver avoids setting the parent clock rates so the MPLL clocks aren't changed (as these are reserved for audio). The only exception to this is the GXL S805X package because the 744MHz OPP isn't working correctly there. While here, make most of meson-gxl-mali re-usable to reduce the amount of duplicate code between GXBB and GXL. This is more important now as we don't want to duplicate the GPU OPP table. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200719173213.639540-2-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi | 61 +++++++++++++++++++++++ arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 51 ++++--------------- arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi | 46 ++++------------- arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi | 17 +++---- 4 files changed, 89 insertions(+), 86 deletions(-) create mode 100644 arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi new file mode 100644 index 000000000000..f9771b51c852 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 BayLibre SAS + * Author: Neil Armstrong + */ + +/ { + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <950000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <950000>; + }; + opp-285714285 { + opp-hz = /bits/ 64 <285714285>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + }; + opp-666666666 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <950000>; + }; + opp-744000000 { + opp-hz = /bits/ 64 <744000000>; + opp-microvolt = <950000>; + }; + }; +}; + +&apb { + mali: gpu@c0000 { + compatible = "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + operating-points-v2 = <&gpu_opp_table>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index ea50dd434887..7c029f552a23 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -4,6 +4,7 @@ */ #include "meson-gx.dtsi" +#include "meson-gx-mali450.dtsi" #include #include #include @@ -264,46 +265,6 @@ }; }; -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_GP0_PLL>, - <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <0>, /* Do Nothing */ - <&clkc CLKID_GP0_PLL>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <744000000>, - <0>, /* Do Nothing */ - <744000000>, - <0>; /* Do Nothing */ - }; -}; - &cbus { spifc: spi@8c80 { compatible = "amlogic,meson-gxbb-spifc"; @@ -386,6 +347,16 @@ clocks = <&clkc CLKID_I2C>; }; +&mali { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <744000000>; +}; + &periphs { pinctrl_periphs: pinctrl@4b0 { compatible = "amlogic,meson-gxbb-periphs-pinctrl"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index 6aaafff674f9..478e755cc87c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -4,42 +4,14 @@ * Author: Neil Armstrong */ -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; +#include "meson-gx-mali450.dtsi" - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_GP0_PLL>, - <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <0>, /* Do Nothing */ - <&clkc CLKID_GP0_PLL>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <744000000>, - <0>, /* Do Nothing */ - <744000000>, - <0>; /* Do Nothing */ - }; +&mali { + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; + + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <744000000>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi index f9d705648426..29975849822c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi @@ -11,14 +11,13 @@ }; /* The S805X Package doesn't seem to handle the 744MHz OPP correctly */ +&gpu_opp_table { + opp-744000000 { + status = "disabled"; + }; +}; + &mali { - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-rates; }; -- cgit v1.2.3 From 8f16cfabbc0a6c52b114eca2ff8e95bb07949741 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Jul 2020 19:32:12 +0200 Subject: arm64: dts: amlogic: meson-gxm: add the Mali OPP table and use DVFS Add the OPP table for the Mali-T820 GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200719173213.639540-3-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 45 ++++++++++++++++++++---------- 1 file changed, 30 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index 40e3e123e05b..fe4145112295 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -82,6 +82,35 @@ #cooling-cells = <2>; }; }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <950000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <950000>; + }; + opp-285714285 { + opp-hz = /bits/ 64 <285714285>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + }; + opp-666666666 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <950000>; + }; + }; }; &apb { @@ -106,21 +135,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ + operating-points-v2 = <&gpu_opp_table>; }; }; -- cgit v1.2.3 From 916a0edc43f03f86b13fbc9943e5dc936671ea6e Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 19 Jul 2020 19:32:13 +0200 Subject: arm64: dts: amlogic: meson-g12: add the Mali OPP table and use DVFS Add the OPP table for the Mali Bifrost GPU and drop the hardcoded initial clock configuration. This enables GPU DVFS and thus saves power when the GPU is not in use while still being able switch to a higher clock on demand. Set the GP0_PLL clock to 744MHz (which is the only frequency which cannot be derived from the FCLK dividers) as the clock driver avoids setting the parent clock rates so the HIFI PLL clock isn't changed (as that's reserved for audio). Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200719173213.639540-4-martin.blumenstingl@googlemail.com --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 49 ++++++++++++++++------- 1 file changed, 34 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 41805f2ed8fc..1e83ec5b8c91 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -52,6 +52,39 @@ secure-monitor = <&sm>; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-124999998 { + opp-hz = /bits/ 64 <124999998>; + opp-microvolt = <800000>; + }; + opp-249999996 { + opp-hz = /bits/ 64 <249999996>; + opp-microvolt = <800000>; + }; + opp-285714281 { + opp-hz = /bits/ 64 <285714281>; + opp-microvolt = <800000>; + }; + opp-399999994 { + opp-hz = /bits/ 64 <399999994>; + opp-microvolt = <800000>; + }; + opp-499999992 { + opp-hz = /bits/ 64 <499999992>; + opp-microvolt = <800000>; + }; + opp-666666656 { + opp-hz = /bits/ 64 <666666656>; + opp-microvolt = <800000>; + }; + opp-799999987 { + opp-hz = /bits/ 64 <799999987>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -2362,21 +2395,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <800000000>, - <0>; /* Do Nothing */ + operating-points-v2 = <&gpu_opp_table>; #cooling-cells = <2>; }; }; -- cgit v1.2.3 From 4a183020d35c6100095605e2c4a47b80f6e301f3 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Tue, 21 Jul 2020 12:43:43 +0530 Subject: arm64: dts: qcom: sdm845: Support ETMv4 power management Add "arm,coresight-loses-context-with-cpu" property to coresight ETM nodes to avoid failure of trace session because of losing context on entering deep idle states. Reviewed-by: Mathieu Poirier Signed-off-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/20200721071343.2898-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index e506793407d8..0b5f063dcaea 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3016,6 +3016,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3035,6 +3036,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3054,6 +3056,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3073,6 +3076,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3092,6 +3096,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3111,6 +3116,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3130,6 +3136,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -3149,6 +3156,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { -- cgit v1.2.3 From d3d245aee0b149b5e3034b8790c9d7688526fc70 Mon Sep 17 00:00:00 2001 From: Sandeep Maheswaram Date: Tue, 21 Jul 2020 13:14:49 +0530 Subject: arm64: dts: qcom: sc7180: Add maximum speed property for DWC3 USB node Adding maximum speed property for DWC3 USB node which can be used for setting interconnect bandwidth. Signed-off-by: Sandeep Maheswaram Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1595317489-18432-3-git-send-email-sanm@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 16df08d9ef8f..3fe759b68c87 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2656,6 +2656,7 @@ snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; }; }; -- cgit v1.2.3 From 82540defdd9cfc491f564ffb8d01911966636bc7 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 20 Jul 2020 16:28:46 +0530 Subject: ARM: dts: rockchip: Add usb host0 ohci node for rk3288 rk3288 and rk3288w have a usb host0 ohci controller. Although rk3288 ohci doesn't actually work on hardware, but rk3288w ohci can work well. So add usb host0 ohci node in rk3288 dtsi and boards can then enable it if supported. Signed-off-by: Jagan Teki Cc: William Wu Link: https://lore.kernel.org/r/20200720105846.367776-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 9fa11b9f4522..68d5a58cfe88 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -616,7 +616,16 @@ status = "disabled"; }; - /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + /* NOTE: doesn't work on RK3288, but was fixed on RK3288W */ + usb_host0_ohci: usb@ff520000 { + compatible = "generic-ohci"; + reg = <0x0 0xff520000 0x0 0x100>; + interrupts = ; + clocks = <&cru HCLK_USBHOST0>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; usb_host1: usb@ff540000 { compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb", -- cgit v1.2.3 From 417b188a985d3557b0ecb5623b27bd9843f03aec Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 20 Jul 2020 16:32:28 +0530 Subject: ARM: dts: rockchip: Add USB for RockPI N8/N10 Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200720110230.367985-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-vmarc-som.dtsi | 42 ++++++++++++ .../boot/dts/rockchip-radxa-dalang-carrier.dtsi | 18 +++++ .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 78 ++++++++++++++++++++++ 3 files changed, 138 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index cd61b6230f0d..78164d117248 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -267,4 +267,46 @@ rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; }; }; + + vbus_host { + usb1_en_oc: usb1-en-oc { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vbus_typec { + usb0_en_oc: usb0-en-oc { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vbus_host { + enable-active-high; + gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ +}; + +&vbus_typec { + enable-active-high; + gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ }; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 450e5bb5af0b..d2b6ead148a2 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -33,6 +33,24 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcin>; }; + + vbus_host: vbus-host { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_oc>; + regulator-name = "vbus_host"; /* HOST-5V */ + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vbus_typec: vbus-typec { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_oc>; + regulator-name = "vbus_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 37ed95d5f7e9..111d6cf9a4e6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -304,6 +304,18 @@ rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; }; }; + + vbus_host { + usb1_en_oc: usb1-en-oc { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vbus_typec { + usb0_en_oc: usb0-en-oc { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pmu_io_domains { @@ -324,8 +336,74 @@ max-frequency = <150000000>; }; +&tcphy0 { + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; status = "okay"; }; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vbus_typec>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; + }; +}; + + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&vbus_host { + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_oc>; +}; + +&vbus_typec { + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_oc>; +}; -- cgit v1.2.3 From d0cb2f30e7c033f0a8bbe98ec73dbc1db4788942 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 20 Jul 2020 16:32:29 +0530 Subject: ARM: dts: rockchip: Add HDMI out for RockPI N8/N10 This patch adds support to enable HDMI out for N10 and N8 combinations SBCs. Signed-off-by: Jagan Teki Signed-off-by: Suniel Mahesh Link: https://lore.kernel.org/r/20200720110230.367985-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-vmarc-som.dtsi | 10 ++++++++++ arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi | 20 ++++++++++++++++++++ .../arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 12 ++++++++++++ 3 files changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index 78164d117248..4a373f5aa600 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -38,6 +38,12 @@ snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; }; +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec_c0>; +}; + &i2c0 { clock-frequency = <400000>; status = "okay"; @@ -225,6 +231,10 @@ }; }; +&i2c5 { + status = "okay"; +}; + &io_domains { bb-supply = <&vcc_io>; flash0-supply = <&vccio_flash>; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index d2b6ead148a2..26b53eac4706 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -66,6 +66,10 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + &pwm0 { status = "okay"; }; @@ -94,3 +98,19 @@ &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 111d6cf9a4e6..ebccc4a153a2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -39,6 +39,12 @@ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-falling-time-ns = <30>; @@ -285,6 +291,12 @@ }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + &io_domains { status = "okay"; bt656-supply = <&vcca_1v8>; -- cgit v1.2.3 From 93ca8ac2e8fcea6feb02a40edd2334144b62fc6e Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Mon, 20 Jul 2020 16:32:30 +0530 Subject: arm64: dts: rockchip: Add PCIe for RockPI N10 This patch adds support to enable PCIe for RockPI N10. Signed-off-by: Jagan Teki Link: https://lore.kernel.org/r/20200720110230.367985-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 40 ++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index ebccc4a153a2..5d087be04af8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -11,6 +11,18 @@ / { compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + vcc3v3_pcie: vcc-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; }; &cpu_l0 { @@ -142,7 +154,8 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -177,7 +190,8 @@ regulator-min-microvolt = <1850000>; regulator-max-microvolt = <1850000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1850000>; }; }; @@ -304,6 +318,22 @@ sdmmc-supply = <&vccio_sd>; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */ + vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */ + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -311,6 +341,12 @@ }; }; + pcie { + pcie_pwr: pcie-pwr { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; -- cgit v1.2.3 From 9dbf272cf4f1c7c03576c9162020ce64a3d2b797 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:07 +0200 Subject: ARM: dts: mmp2-olpc-xo-1-75: Fix camera I2C node validation mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: $nodename:0: 'camera_i2c' does not match '^i2c(@.*)?' mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'sda-gpios' is a required property mmp2-olpc-xo-1-75.dt.yaml: camera_i2c: 'scl-gpios' is a required property The "gpios" property actually was documented as deprecated, but got dropped in commit 0175ce4a58d6 ("dt-bindings: i2c: Convert i2c-gpio binding to json-schema"). It's probably best kept forgotten though. Link: https://lore.kernel.org/r/20200718205019.184927-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 6cfa0d4a1884..02f4005a654b 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -77,10 +77,10 @@ }; }; - camera_i2c { + i2c { compatible = "i2c-gpio"; - gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>, - <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; #address-cells = <1>; #size-cells = <0>; i2c-gpio,timeout-ms = <1000>; -- cgit v1.2.3 From f45200b67ea381d784dca8088dc31cbf06bd17cc Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:08 +0200 Subject: ARM: dts: mmp2-olpc-xo-1-75: Delete #address-cells from ssp3 On the XO-1.75, this node represents a bus interface that operates in slave mode and thus is only able to accommodate a single subnode; no address cells are necessary. The Documentation/devicetree/bindings/spi/spi-controller.yaml binding prefers that we drop the property instead of setting it to zero. This fixes a DT validation error: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: { ... } is valid under each of {'required': ['spi-slave']}, {'required': ['#address-cells']} We also need to drop #size-cells: arch/arm/boot/dts/mmp2-olpc-xo-1-75.dt.yaml: spi@d4037000: '#address-cells' is a dependency of '#size-cells' Link: https://lore.kernel.org/r/20200718205019.184927-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 02f4005a654b..392f546f7915 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -221,7 +221,8 @@ }; &ssp3 { - #address-cells = <0>; + /delete-property/ #address-cells; + /delete-property/ #size-cells; spi-slave; status = "okay"; ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3 From 1267340fe51c15dcc22d2f11d1c69f97c5e2f878 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:09 +0200 Subject: ARM: dts: mmp2: Add #power-domain-cells to /clocks The power management unit, described by the soc_clocks node, controls the power to the peripherals by the means of power domains with a single cell -- the domain number. Link: https://lore.kernel.org/r/20200718205019.184927-4-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 4306f3a6742b..9b8a156cf73e 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -421,6 +421,7 @@ reg-names = "mpmu", "apmu", "apbc"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; }; }; -- cgit v1.2.3 From f45a04a5ec448ad8ded1cdc095f6acb005e6b66a Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:10 +0200 Subject: ARM: dts: mmp2: Extend the MPMU reg range The ACGR register is at the offset of 0x1024, beyond the 4k originally assigned to the MPMU range. Link: https://lore.kernel.org/r/20200718205019.184927-5-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 9b8a156cf73e..9e77f685fb18 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -415,7 +415,7 @@ soc_clocks: clocks { compatible = "marvell,mmp2-clock"; - reg = <0xd4050000 0x1000>, + reg = <0xd4050000 0x2000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; reg-names = "mpmu", "apmu", "apbc"; -- cgit v1.2.3 From f2023d9d105104fb94d59cf83afb0fa843638245 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:11 +0200 Subject: ARM: dts: mmp2: Add Audio SRAM This memory is region is where the two-channel audio DMA can pump sound samples into the SSPA's internal FIFO. Link: https://lore.kernel.org/r/20200718205019.184927-6-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 9e77f685fb18..da2c92328464 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -413,6 +413,15 @@ }; }; + asram: sram@e0000000 { + compatible = "mmio-sram"; + reg = <0xe0000000 0x10000>; + ranges = <0 0xe0000000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + soc_clocks: clocks { compatible = "marvell,mmp2-clock"; reg = <0xd4050000 0x2000>, -- cgit v1.2.3 From f3f202bb5600e77dc54ae1d90d6db1dcff2688b2 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:12 +0200 Subject: ARM: dts: mmp2: Add DMA nodes There is a 16-channel peripheral DMA controller along with two-channel audio DMA engines. Link: https://lore.kernel.org/r/20200718205019.184927-7-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index da2c92328464..b349f4f35706 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -192,6 +192,24 @@ clock-output-names = "mclk"; status = "disabled"; }; + + adma0: dma-controller@d42a0800 { + compatible = "marvell,adma-1.0"; + reg = <0xd42a0800 0x100>; + interrupts = <48>; + #dma-cells = <1>; + asram = <&asram>; + iram = <&asram>; + status = "disabled"; + }; + + adma1: dma-controller@d42a0900 { + compatible = "marvell,adma-1.0"; + reg = <0xd42a0900 0x100>; + interrupts = <48>; + #dma-cells = <1>; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ @@ -201,6 +219,14 @@ reg = <0xd4000000 0x00200000>; ranges; + dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <48>; + #dma-channels = <16>; + status = "disabled"; + }; + timer0: timer@d4014000 { compatible = "mrvl,mmp-timer"; reg = <0xd4014000 0x100>; -- cgit v1.2.3 From 5fd71502e2a78a78b11e338033afe44f6501e759 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:13 +0200 Subject: ARM: dts: mmp2: Add Audio Clock controller This device generates the audio codec master clock and bit clock. Link: https://lore.kernel.org/r/20200718205019.184927-8-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index b349f4f35706..dd7fba65799e 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -210,6 +210,19 @@ #dma-cells = <1>; status = "disabled"; }; + + audio_clk: clocks@d42a0c30 { + compatible = "marvell,mmp2-audio-clock"; + reg = <0xd42a0c30 0x10>; + clock-names = "audio", "vctcxo", "i2s0", "i2s1"; + clocks = <&soc_clocks MMP2_CLK_AUDIO>, + <&soc_clocks MMP2_CLK_VCTCXO>, + <&soc_clocks MMP2_CLK_I2S0>, + <&soc_clocks MMP2_CLK_I2S1>; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; + #clock-cells = <1>; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ -- cgit v1.2.3 From 3f2326312aec91f8fdd5101fd662b3065e068aeb Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:14 +0200 Subject: ARM: dts: mmp2: Add SSPA nodes There are two I2S-capable audio serial port blocks. Link: https://lore.kernel.org/r/20200718205019.184927-9-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index dd7fba65799e..31592acd3ef4 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -223,6 +223,32 @@ #clock-cells = <1>; status = "disabled"; }; + + sspa0: audio-controller@d42a0c00 { + compatible = "marvell,mmp-sspa"; + reg = <0xd42a0c00 0x30>, + <0xd42a0c80 0x30>; + interrupts = <2>; + clock-names = "audio", "bitclk"; + clocks = <&soc_clocks MMP2_CLK_AUDIO>, + <&audio_clk 1>; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + sspa1: audio-controller@d42a0d00 { + compatible = "marvell,mmp-sspa"; + reg = <0xd42a0d00 0x30>, + <0xd42a0d80 0x30>; + interrupts = <3>; + clock-names = "audio", "bitclk"; + clocks = <&soc_clocks MMP2_CLK_AUDIO>, + <&audio_clk 2>; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>; + #sound-dai-cells = <0>; + status = "disabled"; + }; }; apb@d4000000 { /* APB */ -- cgit v1.2.3 From d1e6f7c9f0f116e9b708a5e129856a4012fbd264 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:15 +0200 Subject: ARM: dts: mmp2-olpc-xo-1-75: Enable audio support This enables the audio SRAM, DMA engine, I2S interface, and codec, hooks them together and adds a audio-graph-card instance. It also removes the jack gpios from the gpio-keys instance, because the audio jack driver registers an input device. Link: https://lore.kernel.org/r/20200718205019.184927-10-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 65 ++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 392f546f7915..5f1da5855098 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -57,24 +57,6 @@ linux,code = ; wakeup-source; }; - - microphone_insert { - label = "Microphone Plug"; - gpios = <&gpio 96 GPIO_ACTIVE_HIGH>; - linux,input-type = ; - linux,code = ; - debounce-interval = <100>; - wakeup-source; - }; - - headphone_insert { - label = "Headphone Plug"; - gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; - linux,input-type = ; - linux,code = ; - debounce-interval = <100>; - wakeup-source; - }; }; i2c { @@ -123,6 +105,18 @@ reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; }; + sound-card { + compatible = "audio-graph-card"; + label = "OLPC XO"; + dais = <&sspa0_dai>; + routing = "Headphones", "HPOL", + "Headphones", "HPOR", + "MIC2", "Mic Jack"; + widgets = "Headphone", "Headphones", "Microphone", "Mic Jack"; + hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>; + mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>; + }; + soc { axi@d4200000 { ap-sp@d4290000 { @@ -197,6 +191,14 @@ compatible = "realtek,alc5631"; reg = <0x1a>; status = "okay"; + + port { + rt5631_0: endpoint { + mclk-fs = <256>; + clocks = <&audio_clk 0>; + remote-endpoint = <&sspa0_0>; + }; + }; }; }; @@ -243,3 +245,30 @@ }; }; }; + +&asram { + status = "okay"; +}; + +&adma0 { + status = "okay"; +}; + +&audio_clk { + status = "okay"; +}; + +&sspa0 { + status = "okay"; + dmas = <&adma0 0>, <&adma0 1>; + dma-names = "tx", "rx"; + + sspa0_dai: port { + sspa0_0: endpoint { + remote-endpoint = <&rt5631_0>; + frame-master; + bitclock-master; + dai-format = "i2s"; + }; + }; +}; -- cgit v1.2.3 From b4c2abb6810e9382733c067deb35fe83359e5a09 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:16 +0200 Subject: ARM: dts: mmp2: Add the GPU There's a GC860 2D + 3D core. Link: https://lore.kernel.org/r/20200718205019.184927-11-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 31592acd3ef4..445bdcd50b9e 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -5,6 +5,7 @@ */ #include +#include / { #address-cells = <1>; @@ -38,6 +39,17 @@ reg = <0xd4200000 0x00200000>; ranges; + gpu: gpu@d420d000 { + compatible = "vivante,gc"; + reg = <0xd420d000 0x4000>; + interrupts = <8>; + status = "disabled"; + clocks = <&soc_clocks MMP2_CLK_GPU_3D>, + <&soc_clocks MMP2_CLK_GPU_BUS>; + clock-names = "core", "bus"; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>; + }; + intc: interrupt-controller@d4282000 { compatible = "mrvl,mmp2-intc"; interrupt-controller; -- cgit v1.2.3 From cbcb5b33df5fbd4ccea91cb4e767e74dcdd13ad0 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:17 +0200 Subject: ARM: dts: mmp2-olpc-xo-1-75: Enable the GPU Enable the 3D + 2D (GC860) GPU core. Link: https://lore.kernel.org/r/20200718205019.184927-12-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index 5f1da5855098..f1a41152e9dd 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -272,3 +272,7 @@ }; }; }; + +&gpu { + status = "okay"; +}; -- cgit v1.2.3 From d896b86e09a723d442058eb95d4324a629859864 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:18 +0200 Subject: ARM: dts: mmp3: Add the GPU There's a GC2000 3D core accompanied by a GC300 2D core. Link: https://lore.kernel.org/r/20200718205019.184927-13-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp3.dtsi | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 57231d49d938..cc4efd0efabd 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -4,6 +4,7 @@ */ #include +#include #include / { @@ -310,6 +311,30 @@ clock-output-names = "mclk"; status = "disabled"; }; + + gpu_3d: gpu@d420d000 { + compatible = "vivante,gc"; + reg = <0xd420d000 0x2000>; + interrupt-parent = <&gpu_mux>; + interrupts = <0>; + status = "disabled"; + clocks = <&soc_clocks MMP3_CLK_GPU_3D>, + <&soc_clocks MMP3_CLK_GPU_BUS>; + clock-names = "core", "bus"; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>; + }; + + gpu_2d: gpu@d420f000 { + compatible = "vivante,gc"; + reg = <0xd420f000 0x2000>; + interrupt-parent = <&gpu_mux>; + interrupts = <2>; + status = "disabled"; + clocks = <&soc_clocks MMP3_CLK_GPU_2D>, + <&soc_clocks MMP3_CLK_GPU_BUS>; + clock-names = "core", "bus"; + power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>; + }; }; apb@d4000000 { -- cgit v1.2.3 From 67598a474fbbb0a323bf07048d750247f1237198 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sat, 18 Jul 2020 22:50:19 +0200 Subject: ARM: dts: mmp3-dell-ariel: Enable the GPU Enable the 2D (GC300) and the 3D (GC2000) GPUs cores. Link: https://lore.kernel.org/r/20200718205019.184927-14-lkundrak@v3.sk Signed-off-by: Lubomir Rintel Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/mmp3-dell-ariel.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index b0ec14c42164..fe3b1cd695ee 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -114,3 +114,11 @@ cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&gpu_2d { + status = "okay"; +}; + +&gpu_3d { + status = "okay"; +}; -- cgit v1.2.3 From b23b2b842002424147b820f22d52a8306bd7b2ac Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Fri, 24 Jul 2020 12:00:35 +0930 Subject: ARM: dts: aspeed: rainier: Add CFAM reset GPIO The GPIO on Q0 is used for resetting the CFAM of the processor that the ASPEED master is connected to. The signal is wired as active high on the first pass systems. Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index ac7cc96a15d3..e91f3bc7a0c2 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -125,6 +125,12 @@ #address-cells = <2>; #size-cells = <0>; + /* + * CFAM Reset is supposed to be active low but pass1 hardware is wired + * active high. + */ + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + cfam@0,0 { reg = <0 0>; #address-cells = <1>; -- cgit v1.2.3 From f17af8953b7df32254d56442db026209855f2e4d Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Fri, 24 Jul 2020 12:00:36 +0930 Subject: ARM: dts: aspeed: tacoma: Add CFAM reset GPIO The GPIO on Q0 is used for resetting the CFAM of the processor that the ASPEED master is connected to. Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index b70087c591da..8d54c221f98e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -185,6 +185,7 @@ fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>; fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>; cfam@0,0 { reg = <0 0>; -- cgit v1.2.3 From a5d28390d6460ac851536cba0478e20e1b61d810 Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Thu, 23 Jul 2020 16:08:22 -0700 Subject: ARM: dts: aspeed: cmm: Fixup I2C tree Create all the i2c switches in device tree and use aliases to assign child channels with consistent bus numbers. Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to avoid potential conflicts when multiple devices (beind the switches) use the same device address. Signed-off-by: Tao Ren Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts | 1231 ++++++++++++++++++++++++- 1 file changed, 1228 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts index 016bbcb99bb6..7bc7df7ed428 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts @@ -19,8 +19,8 @@ serial3 = &uart4; /* - * Hardcode the bus number of i2c switches' channels to - * avoid breaking the legacy applications. + * PCA9548 (1-0077) provides 8 channels for connecting to + * 4 Line Cards and 4 Fabric Cards. */ i2c16 = &imux16; i2c17 = &imux17; @@ -30,6 +30,11 @@ i2c21 = &imux21; i2c22 = &imux22; i2c23 = &imux23; + + /* + * PCA9548 (2-0071) provides 8 channels for connecting to + * Power Distribution Board. + */ i2c24 = &imux24; i2c25 = &imux25; i2c26 = &imux26; @@ -38,6 +43,11 @@ i2c29 = &imux29; i2c30 = &imux30; i2c31 = &imux31; + + /* + * PCA9548 (8-0077) provides 8 channels and the first 4 + * channels are connecting to 4 Fan Control Boards. + */ i2c32 = &imux32; i2c33 = &imux33; i2c34 = &imux34; @@ -46,6 +56,226 @@ i2c37 = &imux37; i2c38 = &imux38; i2c39 = &imux39; + + /* + * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting + * to Line Card #1. + */ + i2c40 = &imux40; + i2c41 = &imux41; + i2c42 = &imux42; + i2c43 = &imux43; + i2c44 = &imux44; + i2c45 = &imux45; + i2c46 = &imux46; + i2c47 = &imux47; + i2c48 = &imux48; + i2c49 = &imux49; + i2c50 = &imux50; + i2c51 = &imux51; + i2c52 = &imux52; + i2c53 = &imux53; + i2c54 = &imux54; + i2c55 = &imux55; + + /* + * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting + * to Line Card #2. + */ + i2c56 = &imux56; + i2c57 = &imux57; + i2c58 = &imux58; + i2c59 = &imux59; + i2c60 = &imux60; + i2c61 = &imux61; + i2c62 = &imux62; + i2c63 = &imux63; + i2c64 = &imux64; + i2c65 = &imux65; + i2c66 = &imux66; + i2c67 = &imux67; + i2c68 = &imux68; + i2c69 = &imux69; + i2c70 = &imux70; + i2c71 = &imux71; + + /* + * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting + * to Line Card #3. + */ + i2c72 = &imux72; + i2c73 = &imux73; + i2c74 = &imux74; + i2c75 = &imux75; + i2c76 = &imux76; + i2c77 = &imux77; + i2c78 = &imux78; + i2c79 = &imux79; + i2c80 = &imux80; + i2c81 = &imux81; + i2c82 = &imux82; + i2c83 = &imux83; + i2c84 = &imux84; + i2c85 = &imux85; + i2c86 = &imux86; + i2c87 = &imux87; + + /* + * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting + * to Line Card #4. + */ + i2c88 = &imux88; + i2c89 = &imux89; + i2c90 = &imux90; + i2c91 = &imux91; + i2c92 = &imux92; + i2c93 = &imux93; + i2c94 = &imux94; + i2c95 = &imux95; + i2c96 = &imux96; + i2c97 = &imux97; + i2c98 = &imux98; + i2c99 = &imux99; + i2c100 = &imux100; + i2c101 = &imux101; + i2c102 = &imux102; + i2c103 = &imux103; + + /* + * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting + * to Fabric Card #1. + */ + i2c104 = &imux104; + i2c105 = &imux105; + i2c106 = &imux106; + i2c107 = &imux107; + i2c108 = &imux108; + i2c109 = &imux109; + i2c110 = &imux110; + i2c111 = &imux111; + i2c112 = &imux112; + i2c113 = &imux113; + i2c114 = &imux114; + i2c115 = &imux115; + i2c116 = &imux116; + i2c117 = &imux117; + i2c118 = &imux118; + i2c119 = &imux119; + + /* + * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting + * to Fabric Card #2. + */ + i2c120 = &imux120; + i2c121 = &imux121; + i2c122 = &imux122; + i2c123 = &imux123; + i2c124 = &imux124; + i2c125 = &imux125; + i2c126 = &imux126; + i2c127 = &imux127; + i2c128 = &imux128; + i2c129 = &imux129; + i2c130 = &imux130; + i2c131 = &imux131; + i2c132 = &imux132; + i2c133 = &imux133; + i2c134 = &imux134; + i2c135 = &imux135; + + /* + * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting + * to Fabric Card #3. + */ + i2c136 = &imux136; + i2c137 = &imux137; + i2c138 = &imux138; + i2c139 = &imux139; + i2c140 = &imux140; + i2c141 = &imux141; + i2c142 = &imux142; + i2c143 = &imux143; + i2c144 = &imux144; + i2c145 = &imux145; + i2c146 = &imux146; + i2c147 = &imux147; + i2c148 = &imux148; + i2c149 = &imux149; + i2c150 = &imux150; + i2c151 = &imux151; + + /* + * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting + * to Fabric Card #4. + */ + i2c152 = &imux152; + i2c153 = &imux153; + i2c154 = &imux154; + i2c155 = &imux155; + i2c156 = &imux156; + i2c157 = &imux157; + i2c158 = &imux158; + i2c159 = &imux159; + i2c160 = &imux160; + i2c161 = &imux161; + i2c162 = &imux162; + i2c163 = &imux163; + i2c164 = &imux164; + i2c165 = &imux165; + i2c166 = &imux166; + i2c167 = &imux167; + + /* + * PCA9548 (32-0070), 8 channels connecting to Fan Control + # Board #1. + */ + i2c168 = &imux168; + i2c169 = &imux169; + i2c170 = &imux170; + i2c171 = &imux171; + i2c172 = &imux172; + i2c173 = &imux173; + i2c174 = &imux174; + i2c175 = &imux175; + + /* + * PCA9548 (33-0070), 8 channels connecting to Fan Control + # Board #2. + */ + i2c176 = &imux176; + i2c177 = &imux177; + i2c178 = &imux178; + i2c179 = &imux179; + i2c180 = &imux180; + i2c181 = &imux181; + i2c182 = &imux182; + i2c183 = &imux183; + + /* + * PCA9548 (34-0070), 8 channels connecting to Fan Control + # Board #3. + */ + i2c184 = &imux184; + i2c185 = &imux185; + i2c186 = &imux186; + i2c187 = &imux187; + i2c188 = &imux188; + i2c189 = &imux189; + i2c190 = &imux190; + i2c191 = &imux191; + + /* + * PCA9548 (35-0070), 8 channels connecting to Fan Control + # Board #4. + */ + i2c192 = &imux192; + i2c193 = &imux193; + i2c194 = &imux194; + i2c195 = &imux195; + i2c196 = &imux196; + i2c197 = &imux197; + i2c198 = &imux198; + i2c199 = &imux199; }; chosen { @@ -103,53 +333,846 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x77>; + i2c-mux-idle-disconnect; + /* To Fabric Card #1 */ imux16: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux104: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux105: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux106: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux107: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux108: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux109: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux110: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux111: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux112: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux113: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux114: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux115: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux116: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux117: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux118: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux119: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fabric Card #2 */ imux17: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux120: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux121: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux122: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux123: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux124: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux125: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux126: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux127: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux128: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux129: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux130: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux131: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux132: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux133: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux134: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux135: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Line Card #1 */ imux18: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux40: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux41: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux42: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux43: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux44: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux45: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux46: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux47: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux48: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux49: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux50: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux51: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux52: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux53: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux54: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux55: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Line Card #2 */ imux19: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux56: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux57: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux58: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux59: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux60: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux61: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux62: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux63: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux64: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux65: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux66: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux67: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux68: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux69: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux70: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux71: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To LC3 SCM */ imux20: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux72: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux73: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux74: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux75: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux76: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux77: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux78: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux79: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux80: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux81: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux82: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux83: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux84: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux85: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux86: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux87: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Line Card #4 */ imux21: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux88: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux89: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux90: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux91: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux92: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux93: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux94: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux95: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux96: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux97: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux98: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux99: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux100: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux101: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux102: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux103: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fabric Card #3 */ imux22: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux136: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux137: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux138: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux139: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux140: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux141: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux142: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux143: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux144: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux145: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux146: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux147: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux148: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux149: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux150: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux151: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fabric Card #4 */ imux23: i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux152: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux153: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux154: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux155: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux156: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux157: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux158: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux159: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; + + i2c-switch@73 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + imux160: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux161: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux162: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux163: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux164: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux165: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux166: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux167: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; }; }; @@ -165,6 +1188,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x71>; + i2c-mux-idle-disconnect; imux24: i2c@0 { #address-cells = <1>; @@ -252,7 +1276,7 @@ }; /* - * I2C bus to Fan Control Board. + * I2C bus to Fan Control Boards. */ &i2c8 { status = "okay"; @@ -262,29 +1286,230 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x77>; + i2c-mux-idle-disconnect; + /* To Fan Control Board #1 */ imux32: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux168: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux169: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux170: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux171: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux172: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux173: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux174: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux175: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fan Control Board #2 */ imux33: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux176: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux177: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux178: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux179: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux180: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux181: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux182: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux183: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fan Control Board #3 */ imux34: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux184: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux185: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux186: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux187: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux188: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux189: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux190: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux191: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; + /* To Fan Control Board #4 */ imux35: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + i2c-switch@70 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + imux192: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + imux193: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + imux194: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + imux195: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + imux196: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + imux197: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + imux198: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + imux199: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; }; imux36: i2c@4 { -- cgit v1.2.3 From a4bf24d4db1c82a6b0093c8d02def21b1a928e12 Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Thu, 23 Jul 2020 16:05:37 -0700 Subject: ARM: dts: aspeed: wedge40: Disable unused i2c controllers Disable i2c bus #9, #10 and #13 as these i2c controllers are not used on Wedge40. Signed-off-by: Tao Ren Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 54e508530dce..aea23c313088 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -115,14 +115,6 @@ status = "okay"; }; -&i2c9 { - status = "okay"; -}; - -&i2c10 { - status = "okay"; -}; - &i2c11 { status = "okay"; }; @@ -131,10 +123,6 @@ status = "okay"; }; -&i2c13 { - status = "okay"; -}; - &vhub { status = "okay"; }; -- cgit v1.2.3 From acd0093062a3edb8bdb7a6a30e668945d7650adf Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Thu, 23 Jul 2020 16:05:38 -0700 Subject: ARM: dts: aspeed: wedge40: Enable ADC device Enable ADC controller and corresponding voltage sensoring channels for Wedge40. Signed-off-by: Tao Ren Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index aea23c313088..1049cfa80ac2 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -27,6 +27,11 @@ memory@40000000 { reg = <0x40000000 0x20000000>; }; + + ast-adc-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>; + }; }; &wdt1 { @@ -126,3 +131,7 @@ &vhub { status = "okay"; }; + +&adc { + status = "okay"; +}; -- cgit v1.2.3 From e6873087cce622bf5af5b519bdf781d086f6b2f4 Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Thu, 23 Jul 2020 16:05:39 -0700 Subject: ARM: dts: aspeed: wedge40: Enable pwm_tacho device Enable pwm_tacho device for fan control and monitoring in Wedge40. Signed-off-by: Tao Ren Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts | 29 +++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts index 1049cfa80ac2..8ac23ff6b09e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts @@ -135,3 +135,32 @@ &adc { status = "okay"; }; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; +}; -- cgit v1.2.3 From 39889b8294c506d6acf17abad041632c10bbe45c Mon Sep 17 00:00:00 2001 From: Hanna Hawa Date: Fri, 24 Jul 2020 16:26:50 +0300 Subject: arm64: dts: amazon: rename al folder to be amazon As preparation to add device tree binding for Amazon's Annapurna Labs Alpine v3 support. Rename al device tree folder to be amazon. Link: https://lore.kernel.org/r/20200724132654.16549-3-hhhawa@amazon.com Signed-off-by: Hanna Hawa Acked-by: Antoine Tenart Signed-off-by: Arnd Bergmann --- MAINTAINERS | 2 +- arch/arm64/boot/dts/Makefile | 2 +- arch/arm64/boot/dts/al/Makefile | 2 - arch/arm64/boot/dts/al/alpine-v2-evp.dts | 53 ------ arch/arm64/boot/dts/al/alpine-v2.dtsi | 236 --------------------------- arch/arm64/boot/dts/amazon/Makefile | 2 + arch/arm64/boot/dts/amazon/alpine-v2-evp.dts | 53 ++++++ arch/arm64/boot/dts/amazon/alpine-v2.dtsi | 236 +++++++++++++++++++++++++++ 8 files changed, 293 insertions(+), 293 deletions(-) delete mode 100644 arch/arm64/boot/dts/al/Makefile delete mode 100644 arch/arm64/boot/dts/al/alpine-v2-evp.dts delete mode 100644 arch/arm64/boot/dts/al/alpine-v2.dtsi create mode 100644 arch/arm64/boot/dts/amazon/Makefile create mode 100644 arch/arm64/boot/dts/amazon/alpine-v2-evp.dts create mode 100644 arch/arm64/boot/dts/amazon/alpine-v2.dtsi (limited to 'arch') diff --git a/MAINTAINERS b/MAINTAINERS index 7b5ffd646c6b..74ddb41cebd9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1617,7 +1617,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/boot/dts/alpine* F: arch/arm/mach-alpine/ -F: arch/arm64/boot/dts/al/ +F: arch/arm64/boot/dts/amazon/ F: drivers/*/*alpine* ARM/ARTPEC MACHINE SUPPORT diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index f19b762c008d..6f3e1556ce42 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 subdir-y += actions -subdir-y += al subdir-y += allwinner subdir-y += altera +subdir-y += amazon subdir-y += amd subdir-y += amlogic subdir-y += apm diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/al/Makefile deleted file mode 100644 index d79822dc30cd..000000000000 --- a/arch/arm64/boot/dts/al/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_ALPINE) += alpine-v2-evp.dtb diff --git a/arch/arm64/boot/dts/al/alpine-v2-evp.dts b/arch/arm64/boot/dts/al/alpine-v2-evp.dts deleted file mode 100644 index a079d7b3063e..000000000000 --- a/arch/arm64/boot/dts/al/alpine-v2-evp.dts +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Antoine Tenart - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#include "alpine-v2.dtsi" - -/ { - model = "Annapurna Labs Alpine v2 EVP"; - compatible = "al,alpine-v2-evp", "al,alpine-v2"; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/al/alpine-v2.dtsi deleted file mode 100644 index d5e7e2bb4e6c..000000000000 --- a/arch/arm64/boot/dts/al/alpine-v2.dtsi +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. - * - * Antoine Tenart - * - * This software is available to you under a choice of one of two - * licenses. You may choose to be licensed under the terms of the GNU - * General Public License (GPL) Version 2, available from the file - * COPYING in the main directory of this source tree, or the - * BSD license below: - * - * Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * - Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * - * - Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -/dts-v1/; - -#include - -/ { - model = "Annapurna Labs Alpine v2"; - compatible = "al,alpine-v2"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a57"; - device_type = "cpu"; - reg = <0x0 0x0>; - enable-method = "psci"; - }; - - cpu@1 { - compatible = "arm,cortex-a57"; - device_type = "cpu"; - reg = <0x0 0x1>; - enable-method = "psci"; - }; - - cpu@2 { - compatible = "arm,cortex-a57"; - device_type = "cpu"; - reg = <0x0 0x2>; - enable-method = "psci"; - }; - - cpu@3 { - compatible = "arm,cortex-a57"; - device_type = "cpu"; - reg = <0x0 0x3>; - enable-method = "psci"; - }; - }; - - psci { - compatible = "arm,psci-0.2", "arm,psci"; - method = "smc"; - cpu_suspend = <0x84000001>; - cpu_off = <0x84000002>; - cpu_on = <0x84000003>; - }; - - sbclk: sbclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - - interrupt-parent = <&gic>; - ranges; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = , - , - , - ; - }; - - gic: gic@f0100000 { - compatible = "arm,gic-v3"; - reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */ - <0x0 0xf0280000 0x0 0x200000>, /* GICR */ - <0x0 0xf0100000 0x0 0x2000>, /* GICC */ - <0x0 0xf0110000 0x0 0x2000>, /* GICV */ - <0x0 0xf0120000 0x0 0x2000>; /* GICH */ - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - }; - - pci@fbc00000 { - compatible = "pci-host-ecam-generic"; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - #interrupt-cells = <1>; - reg = <0x0 0xfbc00000 0x0 0x100000>; - interrupt-map-mask = <0xf800 0 0 7>; - /* add legacy interrupts for SATA only */ - interrupt-map = <0x4000 0 0 1 &gic 0 53 4>, - <0x4800 0 0 1 &gic 0 54 4>; - /* 32 bit non prefetchable memory space */ - ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; - bus-range = <0x00 0x00>; - msi-parent = <&msix>; - }; - - msix: msix@fbe00000 { - compatible = "al,alpine-msix"; - reg = <0x0 0xfbe00000 0x0 0x100000>; - interrupt-controller; - msi-controller; - al,msi-base-spi = <160>; - al,msi-num-spis = <160>; - }; - - io-fabric { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0xfc000000 0x2000000>; - - uart0: serial@1883000 { - compatible = "ns16550a"; - device_type = "serial"; - reg = <0x1883000 0x1000>; - interrupts = ; - clock-frequency = <500000000>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart1: serial@1884000 { - compatible = "ns16550a"; - device_type = "serial"; - reg = <0x1884000 0x1000>; - interrupts = ; - clock-frequency = <500000000>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@1885000 { - compatible = "ns16550a"; - device_type = "serial"; - reg = <0x1885000 0x1000>; - interrupts = ; - clock-frequency = <500000000>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart3: serial@1886000 { - compatible = "ns16550a"; - device_type = "serial"; - reg = <0x1886000 0x1000>; - interrupts = ; - clock-frequency = <500000000>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - timer0: timer@1890000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x1890000 0x1000>; - interrupts = ; - clocks = <&sbclk>; - }; - - timer1: timer@1891000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x1891000 0x1000>; - interrupts = ; - clocks = <&sbclk>; - status = "disabled"; - }; - - timer2: timer@1892000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x1892000 0x1000>; - interrupts = ; - clocks = <&sbclk>; - status = "disabled"; - }; - - timer3: timer@1893000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x1893000 0x1000>; - interrupts = ; - clocks = <&sbclk>; - status = "disabled"; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/amazon/Makefile b/arch/arm64/boot/dts/amazon/Makefile new file mode 100644 index 000000000000..d79822dc30cd --- /dev/null +++ b/arch/arm64/boot/dts/amazon/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +dtb-$(CONFIG_ARCH_ALPINE) += alpine-v2-evp.dtb diff --git a/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts new file mode 100644 index 000000000000..a079d7b3063e --- /dev/null +++ b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Antoine Tenart + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "alpine-v2.dtsi" + +/ { + model = "Annapurna Labs Alpine v2 EVP"; + compatible = "al,alpine-v2-evp", "al,alpine-v2"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi new file mode 100644 index 000000000000..d5e7e2bb4e6c --- /dev/null +++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi @@ -0,0 +1,236 @@ +/* + * Copyright 2016 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Antoine Tenart + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/dts-v1/; + +#include + +/ { + model = "Annapurna Labs Alpine v2"; + compatible = "al,alpine-v2"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a57"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a57"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a57"; + device_type = "cpu"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a57"; + device_type = "cpu"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2", "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + sbclk: sbclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + ranges; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = , + , + , + ; + }; + + gic: gic@f0100000 { + compatible = "arm,gic-v3"; + reg = <0x0 0xf0200000 0x0 0x10000>, /* GIC Dist */ + <0x0 0xf0280000 0x0 0x200000>, /* GICR */ + <0x0 0xf0100000 0x0 0x2000>, /* GICC */ + <0x0 0xf0110000 0x0 0x2000>, /* GICV */ + <0x0 0xf0120000 0x0 0x2000>; /* GICH */ + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pci@fbc00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbc00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* add legacy interrupts for SATA only */ + interrupt-map = <0x4000 0 0 1 &gic 0 53 4>, + <0x4800 0 0 1 &gic 0 54 4>; + /* 32 bit non prefetchable memory space */ + ranges = <0x2000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <160>; + al,msi-num-spis = <160>; + }; + + io-fabric { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xfc000000 0x2000000>; + + uart0: serial@1883000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1883000 0x1000>; + interrupts = ; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@1884000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1884000 0x1000>; + interrupts = ; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@1885000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1885000 0x1000>; + interrupts = ; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@1886000 { + compatible = "ns16550a"; + device_type = "serial"; + reg = <0x1886000 0x1000>; + interrupts = ; + clock-frequency = <500000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + timer0: timer@1890000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1890000 0x1000>; + interrupts = ; + clocks = <&sbclk>; + }; + + timer1: timer@1891000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1891000 0x1000>; + interrupts = ; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer2: timer@1892000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1892000 0x1000>; + interrupts = ; + clocks = <&sbclk>; + status = "disabled"; + }; + + timer3: timer@1893000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x1893000 0x1000>; + interrupts = ; + clocks = <&sbclk>; + status = "disabled"; + }; + }; + }; +}; -- cgit v1.2.3 From 0183b9b0e9a1e21740ca44afa7fb590551aa8988 Mon Sep 17 00:00:00 2001 From: Ronen Krupnik Date: Fri, 24 Jul 2020 16:26:54 +0300 Subject: arm64: dts: amazon: add Amazon's Annapurna Labs Alpine v3 support This patch adds the initial support for the Amazon's Annapurna Labs Alpine v3 Soc and Evaluation Platform (EVP). Link: https://lore.kernel.org/r/20200724132654.16549-7-hhhawa@amazon.com Signed-off-by: Ronen Krupnik Signed-off-by: Talel Shenhar Signed-off-by: Hanna Hawa Acked-by: Antoine Tenart Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/amazon/Makefile | 1 + arch/arm64/boot/dts/amazon/alpine-v3-evp.dts | 24 ++ arch/arm64/boot/dts/amazon/alpine-v3.dtsi | 408 +++++++++++++++++++++++++++ 3 files changed, 433 insertions(+) create mode 100644 arch/arm64/boot/dts/amazon/alpine-v3-evp.dts create mode 100644 arch/arm64/boot/dts/amazon/alpine-v3.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/amazon/Makefile b/arch/arm64/boot/dts/amazon/Makefile index d79822dc30cd..ba9e11544905 100644 --- a/arch/arm64/boot/dts/amazon/Makefile +++ b/arch/arm64/boot/dts/amazon/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only dtb-$(CONFIG_ARCH_ALPINE) += alpine-v2-evp.dtb +dtb-$(CONFIG_ARCH_ALPINE) += alpine-v3-evp.dtb diff --git a/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts new file mode 100644 index 000000000000..48078f5ea545 --- /dev/null +++ b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + */ + +#include "alpine-v3.dtsi" + +/ { + model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)"; + compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi new file mode 100644 index 000000000000..73a352ea8fd5 --- /dev/null +++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved + */ + +/dts-v1/; + +#include + +/ { + model = "Amazon's Annapurna Labs Alpine v3"; + compatible = "amazon,al-alpine-v3"; + + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x2>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x3>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x102>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x103>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x202>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x203>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x302>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x303>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: cache@0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster1_l2: cache@100 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster2_l2: cache@200 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster3_l2: cache@300 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@0 { + reg = <0x0 0x0 0x0 0x100000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = ; + }; + + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f0000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xf0800000 0 0x10000>, /* GICD */ + <0x0 0xf0a00000 0 0x200000>, /* GICR */ + <0x0 0xf0000000 0 0x2000>, /* GICC */ + <0x0 0xf0010000 0 0x1000>, /* GICH */ + <0x0 0xf0020000 0 0x2000>; /* GICV */ + interrupts = ; + }; + + pcie@fbd00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbd00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* 8 x legacy interrupts for SATA only */ + interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>, + <0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>, + <0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>, + <0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>, + <0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>, + <0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>, + <0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <336>; + al,msi-num-spis = <959>; + interrupt-parent = <&gic>; + }; + + io-fabric { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xfc000000 0x2000000>; + + uart0: serial@1883000 { + compatible = "ns16550a"; + reg = <0x1883000 0x1000>; + interrupts = ; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@1884000 { + compatible = "ns16550a"; + reg = <0x1884000 0x1000>; + interrupts = ; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@1885000 { + compatible = "ns16550a"; + reg = <0x1885000 0x1000>; + interrupts = ; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@1886000 { + compatible = "ns16550a"; + reg = <0x1886000 0x1000>; + interrupts = ; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; + }; +}; -- cgit v1.2.3 From 2fa17dd09533d5d83201be3229a28c1010a8ea3e Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Tue, 21 Jul 2020 01:39:52 +0000 Subject: arm64: dts: meson: misc fixups for w400 dtsi Current devices using the W400 dtsi show mmc tuning errors: [12483.917391] mmc0: tuning execution failed: -5 [30535.551221] mmc0: tuning execution failed: -5 [35359.953671] mmc0: tuning execution failed: -5 [35561.875332] mmc0: tuning execution failed: -5 [61733.348709] mmc0: tuning execution failed: -5 Removing "sd-uhs-sdr50" from the SDIO node prevents this. We also add keep-power-in-suspend to the SDIO node and fix an indentation. Fixes: 3cb74db9b256 ("arm64: dts: meson: convert ugoos-am6 to common w400 dtsi") Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200721013952.11635-1-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi index 98b70d216a6f..2802ddbb83ac 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi @@ -336,9 +336,11 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr50; max-frequency = <100000000>; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + non-removable; disable-wp; @@ -398,7 +400,7 @@ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; - clock-names = "lpo"; + clock-names = "lpo"; }; }; -- cgit v1.2.3 From f1bb924e8f5b50752a80fa5b48c43003680a7b64 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Tue, 21 Jul 2020 01:59:50 +0000 Subject: arm64: dts: meson: fix mmc0 tuning error on Khadas VIM3 Similar to other G12B devices using the W400 dtsi, I see reports of mmc0 tuning errors on VIM3 after a few hours uptime: [12483.917391] mmc0: tuning execution failed: -5 [30535.551221] mmc0: tuning execution failed: -5 [35359.953671] mmc0: tuning execution failed: -5 [35561.875332] mmc0: tuning execution failed: -5 [61733.348709] mmc0: tuning execution failed: -5 I do not see the same on VIM3L, so remove sd-uhs-sdr50 from the common dtsi to silence the error, then (re)add it to the VIM3L dts. Fixes: 4f26cc1c96c9 ("arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi") Fixes: 700ab8d83927 ("arm64: dts: khadas-vim3: add support for the SM1 based VIM3L") Signed-off-by: Christian Hewitt Signed-off-by: Kevin Hilman Link: https://lore.kernel.org/r/20200721015950.11816-1-christianshewitt@gmail.com --- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 1 - arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 4 ++++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 6b75157265e1..94f75b446504 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -293,7 +293,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr50; max-frequency = <100000000>; non-removable; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts index b104967dbef1..0da56c051a0e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -164,6 +164,10 @@ status = "okay"; }; +&sd_emmc_a { + sd-uhs-sdr50; +}; + &usb { phys = <&usb2_phy0>, <&usb2_phy1>; phy-names = "usb2-phy0", "usb2-phy1"; -- cgit v1.2.3 From be45eac21294845ca56694377fe20b36f119718f Mon Sep 17 00:00:00 2001 From: Ravi Kumar Bokka Date: Fri, 10 Jul 2020 07:35:20 -0700 Subject: arm64: dts: qcom: sc7180: Add properties to qfprom for fuse blowing This patch adds properties to the qfprom node to enable fuse blowing. Signed-off-by: Ravi Kumar Bokka Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20200710073439.v5.4.I70c17309f8b433e900656d7c53a2e6b61888bb68@changeid Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180-idp.dts | 4 ++++ arch/arm64/boot/dts/qcom/sc7180.dtsi | 10 ++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 26cc4913d3dd..d8b550723b32 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -288,6 +288,10 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l11a_1p8>; +}; + &qspi { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 3fe759b68c87..65614e66575c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -658,9 +658,15 @@ #power-domain-cells = <1>; }; - qfprom@784000 { + qfprom: efuse@784000 { compatible = "qcom,qfprom"; - reg = <0 0x00784000 0 0x8ff>; + reg = <0 0x00784000 0 0x8ff>, + <0 0x00780000 0 0x7a0>, + <0 0x00782000 0 0x100>, + <0 0x00786000 0 0x1fff>; + + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 072ce1722684f3da8e16bc1ee6471a2a8affb9bd Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Tue, 9 Jun 2020 19:00:28 +0530 Subject: arm64: dts: qcom: sc7180: Add support to skip powering up of ETM Add "qcom,skip-power-up" property to skip powering up ETM on SC7180 SoC to workaround a hardware errata where CPU watchdog counter is stopped when ETM power up bit is set (i.e., when TRCPDCR.PU = 1). Reviewed-by: Mathieu Poirier Signed-off-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/8c5ff297d8c89d9d451352f189baf26c8938842a.1591708204.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 65614e66575c..7097907a8379 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2226,6 +2226,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2245,6 +2246,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2264,6 +2266,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2283,6 +2286,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2302,6 +2306,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2321,6 +2326,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2340,6 +2346,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2359,6 +2366,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { -- cgit v1.2.3 From 015156e689aa1f0c836f9ef4d342b6f6897afd74 Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Tue, 9 Jun 2020 19:00:29 +0530 Subject: arm64: dts: qcom: sc7180: Add iommus property to ETR Define iommus property for Coresight ETR component in SC7180 SoC with the SID and mask to enable SMMU translation for this master. Signed-off-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/2312c9a10e7251d69e31e4f51c0f1d70e6f2f2f5.1591708204.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 7097907a8379..9ad6752c57f7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2127,6 +2127,7 @@ etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04a0 0x20>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; -- cgit v1.2.3 From c5b6bdabceffcdc5058fb0048592e5a68bb814d9 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Fri, 24 Jul 2020 16:22:27 +0930 Subject: ARM: dts: rainier: Describe GPIO mux on I2C3 We have a 4-bus mux whose output is selected by two GPIO inputs. Wire it up in the devicetree and ensure the output is enabled by hogging the appropriate line. Signed-off-by: Andrew Jeffery Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 46 ++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index e91f3bc7a0c2..d20cdf3cd55c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -12,6 +12,10 @@ aliases { serial4 = &uart5; + i2c16 = &i2c2mux0; + i2c17 = &i2c2mux1; + i2c18 = &i2c2mux2; + i2c19 = &i2c2mux3; }; chosen { @@ -68,6 +72,41 @@ }; }; + i2c2mux: i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-parent = <&i2c2>; + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; + idle-state = <0>; + + i2c2mux0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c2mux1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c2mux2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c2mux3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; }; &gpio0 { @@ -109,6 +148,13 @@ output-high; line-name = "mclr_vpp"; }; + + i2c3_mux_oe_n { + gpio-hog; + gpios = ; + output-high; + line-name = "I2C3_MUX_OE_N"; + }; }; &emmc_controller { -- cgit v1.2.3 From 8596ed1502ee2aed39910e58cb2622e98dd433a2 Mon Sep 17 00:00:00 2001 From: Supreeth Venkatesh Date: Fri, 24 Jul 2020 14:28:18 -0500 Subject: ARM: dts: aspeed: Initial device tree for AMD EthanolX Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD. AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD. This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines. Signed-off-by: Supreeth Venkatesh Signed-off-by: Joel Stanley --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts | 219 ++++++++++++++++++++++++++ 2 files changed, 220 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e6a1cac0bfc7..77f1c95c4e1c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1346,6 +1346,7 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-ast2600-evb.dtb \ + aspeed-bmc-amd-ethanolx.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ aspeed-bmc-facebook-cmm.dtb \ diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts new file mode 100644 index 000000000000..60ba86f3e5bc --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 AMD Inc. +// Author: Supreeth Venkatesh +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include + +/ { + model = "AMD EthanolX BMC"; + compatible = "amd,ethanolx-bmc", "aspeed,ast2500"; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>; + }; + }; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + #include "openbmc-flash-layout.dtsi" + }; +}; + + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; +}; + +&uart1 { + //Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + //BMC Console + status = "okay"; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default>; +}; + +//APML for P0 +&i2c0 { + status = "okay"; +}; + +//APML for P1 +&i2c1 { + status = "okay"; +}; + +// Thermal Sensors +&i2c7 { + status = "okay"; + + lm75a@48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + lm75a@49 { + compatible = "national,lm75a"; + reg = <0x49>; + }; + + lm75a@4a { + compatible = "national,lm75a"; + reg = <0x4a>; + }; + + lm75a@4b { + compatible = "national,lm75a"; + reg = <0x4b>; + }; + + lm75a@4c { + compatible = "national,lm75a"; + reg = <0x4c>; + }; + + lm75a@4d { + compatible = "national,lm75a"; + reg = <0x4d>; + }; + + lm75a@4e { + compatible = "national,lm75a"; + reg = <0x4e>; + }; + + lm75a@4f { + compatible = "national,lm75a"; + reg = <0x4f>; + }; +}; + +&kcs1 { + status = "okay"; + kcs_addr = <0x60>; +}; + +&kcs2 { + status = "okay"; + kcs_addr = <0x62>; +}; + +&kcs4 { + status = "okay"; + kcs_addr = <0x97DE>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&lpc_ctrl { + //Enable lpc clock + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default + &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; +}; + + + -- cgit v1.2.3 From a92532ece75d061a1f950e62e17700eebaffe573 Mon Sep 17 00:00:00 2001 From: Jet Li Date: Tue, 21 Jul 2020 20:00:31 +0800 Subject: ARM: dts: aspeed: rainier: Add I2C buses for NVMe use Adding pca9552 exposes the presence detect lines for the cards and tca9554 exposes the presence details for the cards. Signed-off-by: Jet Li Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 105 +++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index d20cdf3cd55c..e803133f25cd 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -300,6 +300,21 @@ compatible = "atmel,24c64"; reg = <0x51>; }; + + tca9554@40 { + compatible = "ti,tca9554"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + + smbus0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus0"; + }; + }; + }; &i2c1 { @@ -614,6 +629,96 @@ compatible = "atmel,24c64"; reg = <0x51>; }; + + pca1: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = ; + }; + + gpio@1 { + reg = <1>; + type = ; + }; + + gpio@2 { + reg = <2>; + type = ; + }; + + gpio@3 { + reg = <3>; + type = ; + }; + + gpio@4 { + reg = <4>; + type = ; + }; + + gpio@5 { + reg = <5>; + type = ; + }; + + gpio@6 { + reg = <6>; + type = ; + }; + + gpio@7 { + reg = <7>; + type = ; + }; + + gpio@8 { + reg = <8>; + type = ; + }; + + gpio@9 { + reg = <9>; + type = ; + }; + + gpio@10 { + reg = <10>; + type = ; + }; + + gpio@11 { + reg = <11>; + type = ; + }; + + gpio@12 { + reg = <12>; + type = ; + }; + + gpio@13 { + reg = <13>; + type = ; + }; + + gpio@14 { + reg = <14>; + type = ; + }; + + gpio@15 { + reg = <15>; + type = ; + }; + }; + }; &i2c9 { -- cgit v1.2.3 From baf78f5dd6e627524fd2f770b521a0afb5247fda Mon Sep 17 00:00:00 2001 From: Eddie James Date: Wed, 18 Mar 2020 11:09:55 -0500 Subject: ARM: dts: aspeed: rainier: Add CFAM SPI controllers Add the four SPI masters on each CFAM. Each master has four 128KB EEPROM devices attached to it. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 226 +++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index e803133f25cd..b15a85aaf97e 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -16,6 +16,19 @@ i2c17 = &i2c2mux1; i2c18 = &i2c2mux2; i2c19 = &i2c2mux3; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + spi30 = &cfam2_spi0; + spi31 = &cfam2_spi1; + spi32 = &cfam2_spi2; + spi33 = &cfam2_spi3; }; chosen { @@ -188,6 +201,77 @@ reg = <0x1000 0x400>; }; + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi2: spi@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam0_spi3: spi@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + sbefifo@2400 { compatible = "ibm,p9-sbefifo"; reg = <0x2400 0x400>; @@ -222,6 +306,77 @@ reg = <0x1000 0x400>; }; + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi2: spi@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam1_spi3: spi@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + sbefifo@2400 { compatible = "ibm,p9-sbefifo"; reg = <0x2400 0x400>; @@ -254,6 +409,77 @@ reg = <0x1000 0x400>; }; + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam2_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi2: spi@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam2_spi3: spi@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + sbefifo@2400 { compatible = "ibm,p9-sbefifo"; reg = <0x2400 0x400>; -- cgit v1.2.3 From da51a0f285e0d38a31f22eb1c134e53de4108d52 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Mon, 27 Jul 2020 13:39:02 +0930 Subject: ARM: dts: aspeed: rainier: Add FSI I2C masters The host processor contains i2c masters on each cfam. Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index b15a85aaf97e..91c4a1186dfa 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -201,6 +201,13 @@ reg = <0x1000 0x400>; }; + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + }; + fsi2spi@1c00 { compatible = "ibm,fsi2spi"; reg = <0x1c00 0x400>; @@ -306,6 +313,13 @@ reg = <0x1000 0x400>; }; + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + }; + fsi2spi@1c00 { compatible = "ibm,fsi2spi"; reg = <0x1c00 0x400>; @@ -409,6 +423,13 @@ reg = <0x1000 0x400>; }; + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + }; + fsi2spi@1c00 { compatible = "ibm,fsi2spi"; reg = <0x1c00 0x400>; -- cgit v1.2.3 From 6036d968abb5ee7f7ad03d98455d39e29b8cad9c Mon Sep 17 00:00:00 2001 From: Eddie James Date: Thu, 2 Jul 2020 09:09:11 -0500 Subject: ARM: dts: aspeed: rainier: Switch OCCs to P10 Rainier uses the P10 processor so the OCC binding should reflect that. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 91c4a1186dfa..3fccf449ebd5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -286,7 +286,7 @@ #size-cells = <0>; fsi_occ0: occ { - compatible = "ibm,p9-occ"; + compatible = "ibm,p10-occ"; }; }; @@ -398,7 +398,7 @@ #size-cells = <0>; fsi_occ1: occ { - compatible = "ibm,p9-occ"; + compatible = "ibm,p10-occ"; }; }; @@ -508,7 +508,7 @@ #size-cells = <0>; fsi_occ2: occ { - compatible = "ibm,p9-occ"; + compatible = "ibm,p10-occ"; }; }; -- cgit v1.2.3 From ffade9f7b83b522094a8e4736c373742bb901147 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 16 Jun 2020 08:57:23 -0500 Subject: ARM: dts: aspeed: rainier: Enable EHCI controller Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 3fccf449ebd5..b94421f6cbd5 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -122,6 +122,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", @@ -138,7 +142,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","", /*R0-R7*/ "","","","","","","","", -- cgit v1.2.3 From 2c887638a5fa1ac5e2491ae911f50d554b604985 Mon Sep 17 00:00:00 2001 From: Eddie James Date: Tue, 16 Jun 2020 08:57:24 -0500 Subject: ARM: dts: Aspeed: tacoma: Enable EHCI controller Enable the second EHCI controller on the AST2600. Also add a line-name for the GPIO that controls power to the USB port. The power control is in place to allow the port to be disabled, for those that are worried about rogue USB sticks. Signed-off-by: Eddie James Signed-off-by: Joel Stanley --- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts index 8d54c221f98e..5f4ee67ac787 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts @@ -95,6 +95,10 @@ }; }; +&ehci1 { + status = "okay"; +}; + &gpio0 { gpio-line-names = /*A0-A7*/ "","","","","","","","", @@ -111,7 +115,7 @@ /*L0-L7*/ "","","","","","","","", /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", - /*O0-O7*/ "led-rear-power","led-rear-id","","","","","","", + /*O0-O7*/ "led-rear-power","led-rear-id","","usb-power","","","","", /*P0-P7*/ "","","","","","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","fsi-routing", /*R0-R7*/ "","","","","","","","", -- cgit v1.2.3 From 8aa6ac22e52693173a71b3e58cb9f361b0bd6d3c Mon Sep 17 00:00:00 2001 From: Sai Prakash Ranjan Date: Tue, 9 Jun 2020 19:00:30 +0530 Subject: arm64: dts: qcom: sc7180: Add support for context losing replicator Add "qcom,replicator-loses-context" property to the replicator in Always-on domain in SC7180 SoC to enable coresight replicator driver to handle this variation of replicator designs. Reviewed-by: Mathieu Poirier Signed-off-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/5072d94849cfaee46748d26ac997212fb2d783c2.1591708204.git.saiprakash.ranjan@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 9ad6752c57f7..5688cbb96bdd 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2200,6 +2200,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + qcom,replicator-loses-context; out-ports { port { -- cgit v1.2.3 From 338bdbcc598a7c2228739f41c697f126c9db384c Mon Sep 17 00:00:00 2001 From: Sharat Masetty Date: Fri, 17 Jul 2020 18:59:37 +0530 Subject: arm64: dts: qcom: SDM845: Enable GPU DDR bw scaling This patch adds the interconnects property for the gpu node and the opp-peak-kBps property to the opps of the gpu opp table. This should help enable DDR bandwidth scaling dynamically and proportionally to the GPU frequency. Signed-off-by: Sharat Masetty Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/1594992579-20662-5-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 0b5f063dcaea..2884577dcb77 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -4007,42 +4007,52 @@ qcom,gmu = <&gmu>; + interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-710000000 { opp-hz = /bits/ 64 <710000000>; opp-level = ; + opp-peak-kBps = <7216000>; }; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = ; + opp-peak-kBps = <7216000>; }; opp-596000000 { opp-hz = /bits/ 64 <596000000>; opp-level = ; + opp-peak-kBps = <6220000>; }; opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-level = ; + opp-peak-kBps = <6220000>; }; opp-414000000 { opp-hz = /bits/ 64 <414000000>; opp-level = ; + opp-peak-kBps = <4068000>; }; opp-342000000 { opp-hz = /bits/ 64 <342000000>; opp-level = ; + opp-peak-kBps = <2724000>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = ; + opp-peak-kBps = <1648000>; }; }; }; -- cgit v1.2.3 From dd7dc299f303f215bb7ab9b2105ee50f591e5013 Mon Sep 17 00:00:00 2001 From: Sharat Masetty Date: Fri, 17 Jul 2020 18:59:38 +0530 Subject: arm64: dts: qcom: sc7180: Add interconnects property for GPU This patch adds the interconnects property to the GPU node. This enables the GPU->DDR path bandwidth voting. Signed-off-by: Sharat Masetty Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/1594992579-20662-6-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 5688cbb96bdd..3255d3768cc0 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1886,6 +1886,9 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; -- cgit v1.2.3 From c8c6c187d05876c41d5c2ed09a2a13077f38ae1f Mon Sep 17 00:00:00 2001 From: Sharat Masetty Date: Fri, 17 Jul 2020 18:59:39 +0530 Subject: arm64: dts: qcom: sc7180: Add opp-peak-kBps to GPU opp Add opp-peak-kBps bindings to the GPU opp table, listing the peak GPU -> DDR bandwidth requirement for each opp level. This will be used to scale the DDR bandwidth along with the GPU frequency dynamically. Signed-off-by: Sharat Masetty Reviewed-by: Matthias Kaehlcke Signed-off-by: Akhil P Oommen Link: https://lore.kernel.org/r/1594992579-20662-7-git-send-email-akhilpo@codeaurora.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 3255d3768cc0..d46b3833e52f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1895,36 +1895,43 @@ opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = ; + opp-peak-kBps = <8532000>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = ; + opp-peak-kBps = <7216000>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = ; + opp-peak-kBps = <5412000>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = ; + opp-peak-kBps = <5412000>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = ; + opp-peak-kBps = <3072000>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = ; + opp-peak-kBps = <3072000>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = ; + opp-peak-kBps = <1804000>; }; }; }; -- cgit v1.2.3 From f30ac26def181e655d1f1d40b9ec2c9e3b333bb5 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Thu, 9 Jul 2020 09:52:44 -0400 Subject: arm64: dts: qcom: add sm8150 GPU nodes This brings up the GPU. Tested on HDK855 by running vulkan CTS. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200709135251.643-14-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 135 +++++++++++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 7a0c5b419ff0..b86a7ead3006 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -547,6 +547,141 @@ }; }; + gpu: gpu@2c00000 { + /* + * note: the amd,imageon compatible makes it possible + * to use the drm/msm driver without the display node, + * make sure to remove it when display node is added + */ + compatible = "qcom,adreno-640.1", + "qcom,adreno", + "amd,imageon"; + #stream-id-cells = <16>; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 675 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = ; + }; + + opp-585000000 { + opp-hz = /bits/ 64 <585000000>; + opp-level = ; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-level = ; + }; + + opp-427000000 { + opp-hz = /bits/ 64 <427000000>; + opp-level = ; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + opp-level = ; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc 0>, + <&gpucc 3>, + <&gpucc 6>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sm8150-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + ; + clocks = <&gpucc 0>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc 0>; + }; + tlmm: pinctrl@3100000 { compatible = "qcom,sm8150-pinctrl"; reg = <0x0 0x03100000 0x0 0x300000>, -- cgit v1.2.3 From 04a3605b184e151744b6adecd1a60654e46f3d2e Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Thu, 9 Jul 2020 09:52:45 -0400 Subject: arm64: dts: qcom: add sm8250 GPU nodes This brings up the GPU. Tested on HDK865 by running vulkan CTS. Signed-off-by: Jonathan Marek Link: https://lore.kernel.org/r/20200709135251.643-15-jonathan@marek.ca Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 142 +++++++++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 551a3cef356e..377172e8967b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -1047,6 +1047,148 @@ #hwlock-cells = <1>; }; + gpu: gpu@3d00000 { + /* + * note: the amd,imageon compatible makes it possible + * to use the drm/msm driver without the display node, + * make sure to remove it when display node is added + */ + compatible = "qcom,adreno-650.2", + "qcom,adreno", + "amd,imageon"; + #stream-id-cells = <16>; + + reg = <0 0x03d00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 670 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-level = ; + }; + + opp-587000000 { + opp-hz = /bits/ 64 <587000000>; + opp-level = ; + }; + + opp-525000000 { + opp-hz = /bits/ 64 <525000000>; + opp-level = ; + }; + + opp-490000000 { + opp-hz = /bits/ 64 <490000000>; + opp-level = ; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + opp-level = ; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = ; + }; + + opp-305000000 { + opp-hz = /bits/ 64 <305000000>; + opp-level = ; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + + reg = <0 0x03d6a000 0 0x30000>, + <0 0x3de0000 0 0x10000>, + <0 0xb290000 0 0x10000>, + <0 0xb490000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc 0>, + <&gpucc 3>, + <&gpucc 6>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8250-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + ; + clocks = <&gpucc 0>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc 0>; + }; + slpi: remoteproc@5c00000 { compatible = "qcom,sm8250-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; -- cgit v1.2.3 From aef9a119dfb91706a71399ca39f61dfe79bdc027 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 27 Jul 2020 13:25:32 +0530 Subject: arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes Enable MDSS and DSI and add the LT9611 HDMI bridge. Also add the HDMI audio nodes. Signed-off-by: Bjorn Andersson Co-developed-by: Srinivas Kandagatla Signed-off-by: Srinivas Kandagatla Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20200727075532.1932134-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 118 +++++++++++++++++++++++++++++ 1 file changed, 118 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c00797bd3b07..a2a98680ccf5 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -74,6 +74,17 @@ }; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + lt9611_1v8: lt9611-vdd18-regulator { compatible = "regulator-fixed"; regulator-name = "LT9611_1V8"; @@ -382,6 +393,25 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &gcc { protected-clocks = , , @@ -395,6 +425,48 @@ }; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +}; + &i2c11 { /* On Low speed expansion */ label = "LS-I2C1"; @@ -407,6 +479,14 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -612,6 +692,21 @@ }; }; + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + slim-dai-link { link-name = "SLIM Playback"; cpu { @@ -686,6 +781,21 @@ }; }; + dsi_sw_sel: dsi-sw-sel { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq { + pins = "gpio84"; + function = "gpio"; + bias-disable; + }; + pcie0_default_state: pcie0-default { clkreq { pins = "gpio36"; @@ -943,6 +1053,14 @@ }; }; +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + &qup_uart6_default { pinmux { pins = "gpio45", "gpio46", "gpio47", "gpio48"; -- cgit v1.2.3 From e4faf75d6c2465dc878acaeb1c22cd87a308c2f1 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 17:01:00 +0200 Subject: arm64: dts: qcom: msm8994: Add SCM node Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200624150107.76234-3-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 1d1ae6f9ba1b..4e23ec38ebb3 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -142,6 +142,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ -- cgit v1.2.3 From 95087f61639e2c167752f05eeed7b7e87876c417 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 17:01:01 +0200 Subject: arm64: dts: qcom: msm8992: Add a label to rpm-requests This enables the node to be referenced directly from other DTs. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200624150107.76234-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 2021795c99ad..8e5a3ae79997 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -258,7 +258,7 @@ qcom,local-pid = <0>; qcom,remote-pid = <6>; - rpm-requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; -- cgit v1.2.3 From 01104518b4162ba889c0ca7eb8f882cbad865171 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 17:01:04 +0200 Subject: arm64: dts: qcom: msm8994: Add support for SMD RPM Add support for SMD RPM, including pm8994 and pmi8994 regulators. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200624150107.76234-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8994.dtsi | 43 +++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi index 4e23ec38ebb3..6707f898607f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi @@ -175,9 +175,31 @@ }; }; + smd { + compatible = "qcom,smd"; + rpm { + interrupts = ; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8994"; + #clock-cells = <1>; + }; + }; + }; + }; + smem { compatible = "qcom,smem"; memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; hwlocks = <&tcsr_mutex 3>; }; @@ -196,6 +218,12 @@ <0xf9002000 0x1000>; }; + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; + reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -449,6 +477,11 @@ reg = <0xfc400000 0x2000>; }; + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + restart@fc4ab000 { compatible = "qcom,pshold"; reg = <0xfc4ab000 0x4>; @@ -666,5 +699,15 @@ , ; }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; -- cgit v1.2.3 From f007210d96be51700d7dce2ccaeedb15e01ce33d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 17:01:02 +0200 Subject: arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. This was the only device using that dtsi, so no point keeping it separate AND with a confusing name (bullhead is based on msm8992 and the file contains regulator values for that specific board). Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200624150107.76234-8-konradybcio@gmail.com [bjorn: Squashed with change that remove regulators from msm8992.dtsi] Signed-off-by: Bjorn Andersson --- .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 225 ++++++++++++++++- arch/arm64/boot/dts/qcom/msm8992.dtsi | 46 ---- arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 --------------------- 3 files changed, 224 insertions(+), 315 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 32670d5afdd6..a2de69292d28 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -47,4 +47,227 @@ }; }; -#include "msm8994-smd-rpm.dtsi" +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_s2: s2 { + /* TODO */ + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8994_l5: l5 { + /* TODO */ + }; + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l7: l7 { + /* TODO */ + }; + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l26: l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + /* TODO: Unsupported voltage range. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + pm8994_l30: l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 8e5a3ae79997..d41ba1ef687a 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -261,52 +261,6 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; - }; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi deleted file mode 100644 index 31e3eb6ab515..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, LGE Inc. All rights reserved. - * Copyright (c) 2016, The Linux Foundation. All rights reserved. - */ - -&smd_rpm { - rpm { - rpm_requests { - pm8994-regulators { - - vdd_l1-supply = <&pm8994_s1>; - vdd_l2_26_28-supply = <&pm8994_s3>; - vdd_l3_11-supply = <&pm8994_s3>; - vdd_l4_27_31-supply = <&pm8994_s3>; - vdd_l5_7-supply = <&pm8994_s3>; - vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; - vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; - vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; - - s1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - s2 { - /* TODO */ - }; - - s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - regulator-system-load = <325000>; - }; - - s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - s7 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - l1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - l2 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - /* TODO */ - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - /* TODO */ - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - }; - - l11 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - qcom,init-voltage = <1200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - proxy-supply = <&pm8994_l12>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - status = "okay"; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - qcom,init-voltage = <2950000>; - status = "okay"; - }; - - l14 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - qcom,init-voltage = <1200000>; - proxy-supply = <&pm8994_l14>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - status = "okay"; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - status = "okay"; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - qcom,init-voltage = <2700000>; - status = "okay"; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - qcom,init-voltage = <2700000>; - status = "okay"; - }; - - l18 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - qcom,init-voltage = <3000000>; - qcom,init-ldo-mode = <1>; - }; - - l19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - status = "okay"; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <570000>; - }; - - l21 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - qcom,init-voltage = <1800000>; - }; - - l22 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - qcom,init-voltage = <3100000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3150000>; - qcom,init-voltage = <3075000>; - }; - - l25 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - }; - - l26 { - /* TODO: value from downstream - regulator-min-microvolt = <987500>; - fails to apply */ - }; - - l27 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - qcom,init-voltage = <1050000>; - }; - - l28 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - qcom,init-voltage = <1000000>; - proxy-supply = <&pm8994_l28>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - }; - - l29 { - /* TODO: Unsupported voltage range. - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - */ - }; - - l30 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ - }; - - l31 { - regulator-min-microvolt = <1262500>; - regulator-max-microvolt = <1262500>; - qcom,init-voltage = <1262500>; - }; - - l32 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ - }; - }; - }; - }; -}; -- cgit v1.2.3 From 551969ad9b6d6b6a69750edb3bec50ed07741d1c Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 24 Jun 2020 17:01:06 +0200 Subject: arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) Add device tree support for the Sony Xperia Z5 smartphone. It's based on Sony Kitakami platform (msm8994) and hence a Kitakami-common DTSI has been created so as to reduce clutter when remaining devices are added. The board currently supports * Serial * SDHCI * I2C * Regulator configuration * pstore log dump * GPIO keys Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com [bjorn: Changed vendor identifier in board compatible from somc to sony] Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/msm8994-sony-xperia-kitakami-sumire.dts | 13 ++ .../dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 235 +++++++++++++++++++++ 3 files changed, 249 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index c98bafe03a96..1ea25cefe48b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts new file mode 100644 index 000000000000..5d6bbbf6c119 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5"; + compatible = "sony,sumire-row", "qcom,msm8994"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi new file mode 100644 index 000000000000..4032b7478f04 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include "msm8994.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0xcf 0x20001>; + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + qcom,board-id = <8 0>; + + /* Kitakami firmware doesn't support PSCI */ + /delete-node/ psci; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Down"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button@1 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button@2 { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + button@3 { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@1fe00000 { + compatible = "ramoops"; + reg = <0x0 0x1fe00000 0x0 0x200000>; + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + + fb_region: fb_region@40000000 { + reg = <0x00 0x40000000 0x00 0x1000000>; + no-map; + }; + }; +}; + +&blsp_spi0 { + status = "okay"; + + /* FPC fingerprint reader */ +}; + +/* I2C1 is disabled on this board */ + +&blsp_i2c2 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp_i2c4 { + status = "okay"; + + /* Empty but active */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* SMB1357 charger and sii8620 HDMI/MHL bridge */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* Synaptics touchscreen */ +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + pmi8994_s1: s1 {}; + pmi8994_s2: s2 {}; + pmi8994_s3: s3 {}; + pmi8994_bby: boost-bypass {}; + }; +}; + +&sdhc1 { + status = "okay"; + + /* Downstream pushes 2.95V to the sdhci device, + * but upstream driver REALLY wants to make vmmc 1.8v + * cause of the hs400-1_8v mode. MMC works fine without + * that regulator, so let's not use it for now. + * vqmmc is also disabled cause driver stll complains. + * + * vmmc-supply = <&pm8994_l20>; + * vqmmc-supply = <&pm8994_s4>; + */ +}; -- cgit v1.2.3 From d99c1c2a1acb7f0b56fdf0e8db36d4983d36a578 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:05 +0200 Subject: arm64: dts: qcom: msm8992: Modernize the DTS style Following changes have been made: - remove name, compatible and msm-id - wrap clocks in clocks{} - order nodes by name and by address - clock_gcc -> gcc - msmgpio -> tlmm - retire msm8992-pins.dtsi - add some of the missing pins - make comments C-style - make apcs a mailbox Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-2-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 90 ----------- arch/arm64/boot/dts/qcom/msm8992.dtsi | 246 ++++++++++++++++++++--------- 2 files changed, 168 insertions(+), 168 deletions(-) delete mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi deleted file mode 100644 index c543c718c22d..000000000000 --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - /* 0-3 for sdc1 4-6 for sdc2 */ - /* Order of pins */ - /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ - /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ - sdc1_clk_on: clk-on { - pinconf { - pins = "sdc1_clk"; - bias-disable = <0>; /* No pull */ - drive-strength = <16>; /* 16mA */ - }; - }; - - sdc1_clk_off: clk-off { - pinconf { - pins = "sdc1_clk"; - bias-disable = <0>; /* No pull */ - drive-strength = <2>; /* 2mA */ - }; - }; - - sdc1_cmd_on: cmd-on { - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <8>; - }; - }; - - sdc1_cmd_off: cmd-off { - pinconf { - pins = "sdc1_cmd"; - bias-pull-up = <0x3>; /* same as 3.10 ?? */ - drive-strength = <2>; /* 2mA */ - }; - }; - - sdc1_data_on: data-on { - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <8>; /* 8mA */ - }; - }; - - sdc1_data_off: data-off { - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - - sdc1_rclk_on: rclk-on { - bias-pull-down; /* pull down */ - }; - - sdc1_rclk_off: rclk-off { - bias-pull-down; /* pull down */ - }; -}; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index d41ba1ef687a..43b2e4cd26f0 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -6,10 +6,6 @@ #include / { - model = "Qualcomm Technologies, Inc. MSM 8992"; - compatible = "qcom,msm8992"; - // msm-id needed by bootloader for selecting correct blob - qcom,msm-id = <251 0>, <252 0>; interrupt-parent = <&intc>; #address-cells = <2>; @@ -40,35 +36,35 @@ }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; }; - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - regulator-always-on; + smem_region: smem@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; }; sfpb_mutex: hwmutex { @@ -98,9 +94,10 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f900d000 { - compatible = "syscon"; + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; }; timer@f9020000 { @@ -161,40 +158,6 @@ }; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = ; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - blsp1_uart2: serial@f991e000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xf991e000 0x1000>; - interrupts = ; - status = "disabled"; - clock-names = "core", "iface"; - clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, - <&clock_gcc GCC_BLSP1_AHB_CLK>; - }; - - clock_gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; - }; - sdhci1: mmc@f9824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; @@ -204,8 +167,8 @@ ; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, - <&clock_gcc GCC_SDCC1_AHB_CLK>; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; pinctrl-names = "default", "sleep"; @@ -220,32 +183,141 @@ status = "okay"; }; + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + rpm_msg_ram: memory@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; }; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + sfpb_mutex_regs: syscon@fd484000 { #address-cells = <1>; #size-cells = <1>; compatible = "syscon"; reg = <0xfd484000 0x400>; }; - }; - memory { - device_type = "memory"; - reg = <0 0 0 0>; // bootloader will update - }; + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <6>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; }; }; @@ -264,6 +336,24 @@ }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; -#include "msm8992-pins.dtsi" -- cgit v1.2.3 From c83e0951bcad645df15b348ebb43e34b687baf78 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:06 +0200 Subject: arm64: dts: qcom: msm8992: Fix SDHCI1 This commit ensures the correct IRQ type is set and disables the device by default. The mmc-hs400-1_8v property is also moved to Bullhead as it might not be present on all boards. The node has been renamed to sdhci@ instead of mmc@ and the phandle was changed to sdhc_1 to comply with the newer DTS style. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-3-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 6 ++++++ arch/arm64/boot/dts/qcom/msm8992.dtsi | 16 +++++++++------- 2 files changed, 15 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index a2de69292d28..1061fd5404aa 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -271,3 +271,9 @@ }; }; }; + +&sdhc_1 { + status = "okay"; + + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 43b2e4cd26f0..8ef1cb8ba8ef 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -158,18 +158,19 @@ }; }; - sdhci1: mmc@f9824900 { + sdhc_1: sdhci@f9824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = , - ; + interrupts = , + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on @@ -179,8 +180,9 @@ regulator-always-on; bus-width = <8>; - mmc-hs400-1_8v; - status = "okay"; + non-removable; + + status = "disabled"; }; blsp1_uart2: serial@f991e000 { -- cgit v1.2.3 From 4acc8d64e56e70d0af319d7decafad2ad4e10f58 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:07 +0200 Subject: arm64: dts: qcom: bullhead: Add qcom,msm-id Add the property required for the bootloader to select the correct device tree blob. It has been removed from the SoC device tree as it should be set on a per-device basis. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-4-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 1061fd5404aa..4f70681e730d 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -11,6 +11,7 @@ model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; /* required for bootloader to select correct board */ + qcom,msm-id = <251 0>, <252 0>; qcom,board-id = <0xb64 0>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; -- cgit v1.2.3 From d54df2210d2fc41fa094a415faa801be6d350d77 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:08 +0200 Subject: arm64: dts: qcom: bullhead: Move UART pinctrl to SoC This pinout is common for every 8992-based device and should therefore reside in the SoC device tree. Also convert addresses into phandles. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-5-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 4f70681e730d..5969b5cfdc85 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -23,15 +23,6 @@ stdout-path = "serial0:115200n8"; }; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -48,6 +39,10 @@ }; }; +&blsp1_uart2 { + status = "okay"; +}; + &rpm_requests { pm8994-regulators { compatible = "qcom,rpm-pm8994-regulators"; -- cgit v1.2.3 From 2912215f53919645da7149670d731729faba77fd Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:09 +0200 Subject: arm64: dts: qcom: msm8992: Add a proper CPU map This commit adds cpu nodes for all 6 cores present on this SoC and the cpu-map. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-6-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 82 ++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 8ef1cb8ba8ef..f780cd39ded6 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -16,24 +16,92 @@ cpus { #address-cells = <2>; #size-cells = <0>; - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - }; - }; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; + enable-method = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + }; + }; }; clocks { -- cgit v1.2.3 From be577b8125f89af549111a648ed66d63b29c666d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:10 +0200 Subject: arm64: dts: qcom: msm8992: Add a SCM node Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-7-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index f780cd39ded6..aee33ed61858 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -118,6 +118,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ -- cgit v1.2.3 From ce13edfb7bfe1c9cf8d43c00fcdc49f4439b4341 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:11 +0200 Subject: arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device Add SPMI PMIC arbiter device to communicate with PMICs attached to SPMI bus. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-8-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index aee33ed61858..acce7be22e50 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -290,6 +290,22 @@ reg = <0xfc4ab000 0x4>; }; + spmi_bus: spmi@fc4c0000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + sfpb_mutex_regs: syscon@fd484000 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 7f8bcc0c4cfec4ea0340a4fc1e39f55126ebbece Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:12 +0200 Subject: arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes Add support for I2C to enable support for peripherals such as touchscreens or sensors. Also add BLSP_UART2 interface. Please note that the naming scheme follows downstream and as abominable as it is, that's what we get. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-9-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 153 ++++++++++++++++++++++++++++++++++ 1 file changed, 153 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index acce7be22e50..e8b801813f14 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -272,6 +272,101 @@ status = "disabled"; }; + blsp_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* Somebody was very creative with their numbering scheme downstream... */ + + blsp_i2c13: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c13_default>; + pinctrl-1 = <&i2c13_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupt = ; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c7: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8994"; #clock-cells = <1>; @@ -337,6 +432,20 @@ bias-pull-down; }; + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-pull-down; + }; + sdc1_clk_on: clk-on { pins = "sdc1_clk"; bias-disable; @@ -397,6 +506,21 @@ bias-disable; }; + i2c5_default: i2c5-default { + /* Don't be fooled! Nobody knows the reason why though... */ + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + i2c6_default: i2c6-default { function = "blsp_i2c6"; pins = "gpio28", "gpio27"; @@ -410,6 +534,35 @@ drive-strength = <2>; bias-disable; }; + + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_default: i2c13-default { + /* Not a typo either. */ + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_sleep: i2c13-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; }; }; -- cgit v1.2.3 From 0835375212681cdf26d120a4fb792ed524f24447 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:13 +0200 Subject: arm64: dts: qcom: msm8992: Add PMU node Add the PMU so we can get proper perf event support on this SoC. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-10-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index e8b801813f14..c4c9a108ae1e 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -130,6 +130,11 @@ reg = <0 0 0 0>; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From 329e16d5f8fcdcbe323c0f01c37f8fbba22d21d2 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:14 +0200 Subject: arm64: dts: qcom: msm8992: Add PSCI support. This SoC's firmware does not fully support the PSCI spec, but it's good enough to bring the cores up. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-11-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index c4c9a108ae1e..bc3acc0cf9bf 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -135,6 +135,11 @@ interrupts = ; }; + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; + reserved-memory { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3 From 75c8a10d9c19938313ed670bbbcdd80ef178732e Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:15 +0200 Subject: arm64: dts: qcom: msm8992: Add RPMCC node This lets us use clocks provided by RPM. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-12-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/msm8992.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index bc3acc0cf9bf..188fff2095f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -588,6 +588,11 @@ rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8992"; + #clock-cells = <1>; + }; }; }; }; -- cgit v1.2.3 From 0f5cdb31e850e113af341a9f05e3b7b0d732b866 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:16 +0200 Subject: arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree This commit adds support for the Xiaomi Libra (Mi 4C) smartphone. It's based on the Qualcomm msm8992 SoC. It currently supports: * Screen console from bootloader * SDHCI * Regulator configuration * Serial console * I2C Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-13-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 364 ++++++++++++++++++++++ 2 files changed, 365 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1ea25cefe48b..cf1b576e4f6c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts new file mode 100644 index 000000000000..4f64ca3ea1ef --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include + +/ { + model = "Xiaomi Mi 4C"; + compatible = "xiaomi,libra", "qcom,msm8992"; + /* required for bootloader to select correct board */ + qcom,msm-id = <251 0 252 0>; + qcom,pmic-id = <65545 65546 0 0>; + qcom,board-id = <12 0>; + + /* This enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@3404000 { + status= "okay"; + compatible = "simple-framebuffer"; + reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0x0 0xdfc00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* Atmel or Synaptics touchscreen */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* Silabs si4705 FM transmitter */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* NCI NFC, + * TI USB320 Type-C controller, + * Pericom 30216a USB (de)mux switch + */ +}; + +&blsp_i2c7 { + status = "okay"; + + /* cm36686 proximity and ambient light sensor */ +}; + +&blsp_i2c13 { + status = "okay"; + + /* ST lsm6db0 gyro/accelerometer */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s7>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 { + /* unused */ + status = "disabled"; + }; + + pm8994_s2: s2 { + /* unused */ + status = "disabled"; + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8994_l5: l5 { + /* unused */ + status = "disabled"; + }; + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l7: l7 { + /* unused */ + status = "disabled"; + }; + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; +}; -- cgit v1.2.3 From 9d56a1c21f1caf52ca4f6f578e98a0503aa8001d Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Thu, 25 Jun 2020 20:21:17 +0200 Subject: arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree Add device tree support for the Microsoft Lumia 950 smartphone. It is based on msm8992 and supports booting Linux via a custom EDK2 port. Currently it supports: * Screen console via EFIFB * Booting via EFI_STUB * SDHCI * I2C * PSCI core bringup Please note that there is an implementation of EL2 startup on this board, but it requires the user to resign from PSCI and use spin-table instead. This revision sticks with PSCI. Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20200625182118.131476-14-konradybcio@gmail.com Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8992-msft-lumia-talkman.dts | 39 ++++++++++++++++++++++ 2 files changed, 40 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index cf1b576e4f6c..d8f1466e6758 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts new file mode 100644 index 000000000000..3cc01f02219d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; + + /* Most Lumia 950 users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs200-1_8v; +}; -- cgit v1.2.3 From 9141b3ca7fedcdc18d9147287913bf80c9c432ba Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 26 Jun 2020 10:06:41 +0200 Subject: ARM: dts: berlin: Align L2 cache-controller nodename with dtschema Fix dtschema validator warnings like: l2-cache-controller@ac0000: $nodename:0: 'l2-cache-controller@ac0000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Jisheng Zhang Link: https://lore.kernel.org/r/20200626080642.4244-1-krzk@kernel.org' Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/berlin2.dtsi | 2 +- arch/arm/boot/dts/berlin2cd.dtsi | 2 +- arch/arm/boot/dts/berlin2q.dtsi | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 3ab3cd250da7..6194857f8a02 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -106,7 +106,7 @@ status = "disabled"; }; - l2: l2-cache-controller@ac0000 { + l2: cache-controller@ac0000 { compatible = "marvell,tauros3-cache", "arm,pl310-cache"; reg = <0xac0000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 7cf3e6302d75..6f30d7eb3b41 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -71,7 +71,7 @@ status = "disabled"; }; - l2: l2-cache-controller@ac0000 { + l2: cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index c44a32e873f4..b6a0acac6836 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -149,7 +149,7 @@ status = "disabled"; }; - l2: l2-cache-controller@ac0000 { + l2: cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; cache-unified; -- cgit v1.2.3 From a7a80474069842c27282a5e991704a0a1f26f243 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 1 Jul 2020 11:45:55 +0200 Subject: arm64: dts: meson: odroid-n2: enable audio loopback Add capture pcm interfaces and loopback routes to the odroid-n2 Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200701094556.194498-2-jbrunet@baylibre.com --- .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 65 ++++++++++++++++++++-- 1 file changed, 61 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 169ea283d4ee..d4421ad164bd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -209,11 +209,28 @@ sound { compatible = "amlogic,axg-sound-card"; model = "G12B-ODROID-N2"; - audio-aux-devs = <&tdmout_b>; + audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, + <&tdmin_c>, <&tdmin_lb>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; + "TDM_B Playback", "TDMOUT_B OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -236,8 +253,20 @@ sound-dai = <&frddr_c>; }; - /* 8ch hdmi interface */ dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; @@ -252,7 +281,7 @@ }; /* hdmi glue */ - dai-link-4 { + dai-link-7 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { @@ -476,6 +505,22 @@ status = "okay"; }; +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + &tdmout_b { status = "okay"; }; @@ -484,6 +529,18 @@ status = "okay"; }; +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; -- cgit v1.2.3 From 67d141c1f8e604a9c02d6a60f7827443d7f44762 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Wed, 1 Jul 2020 11:45:56 +0200 Subject: arm64: dts: meson: odroid-n2: add jack audio output support Add support for audio on jack socket of the odroid-n2 Signed-off-by: Jerome Brunet Signed-off-by: Kevin Hilman Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20200701094556.194498-3-jbrunet@baylibre.com --- .../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 79 ++++++++++++++++++++-- 1 file changed, 74 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index d4421ad164bd..34fffa6d859d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -9,6 +9,7 @@ #include "meson-g12b-s922x.dtsi" #include #include +#include #include / { @@ -20,6 +21,14 @@ ethernet0 = ðmac; }; + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "U19"; + status = "okay"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -209,16 +218,26 @@ sound { compatible = "amlogic,axg-sound-card"; model = "G12B-ODROID-N2"; - audio-aux-devs = <&tdmout_b>, <&tdmin_a>, <&tdmin_b>, - <&tdmin_c>, <&tdmin_lb>; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, + <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, + <&dioo2133>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", "TDMIN_A IN 4", "TDM_B Loopback", "TDMIN_B IN 4", "TDM_B Loopback", "TDMIN_C IN 4", "TDM_B Loopback", "TDMIN_LB IN 1", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", "TODDR_A IN 0", "TDMIN_A OUT", "TODDR_B IN 0", "TDMIN_A OUT", "TODDR_C IN 0", "TDMIN_A OUT", @@ -230,7 +249,11 @@ "TODDR_C IN 2", "TDMIN_C OUT", "TODDR_A IN 6", "TDMIN_LB OUT", "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT"; + "TODDR_C IN 6", "TDMIN_LB OUT", + "U19 INL", "ACODEC LOLP", + "U19 INR", "ACODEC LORP", + "Lineout", "U19 OUTL", + "Lineout", "U19 OUTR"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -275,22 +298,56 @@ dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; - codec { + codec-0 { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; }; - /* hdmi glue */ + /* i2s jack output interface */ dai-link-7 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; + }; + + /* hdmi glue */ + dai-link-8 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; + + /* acodec glue */ + dai-link-9 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; }; }; +&acodec { + AVDD-supply = <&vddao_1v8>; + status = "okay"; +}; + &arb { status = "okay"; }; @@ -505,6 +562,10 @@ status = "okay"; }; +&tdmif_c { + status = "okay"; +}; + &tdmin_a { status = "okay"; }; @@ -525,6 +586,14 @@ status = "okay"; }; +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + &tohdmitx { status = "okay"; }; -- cgit v1.2.3