From 56ba2b3aeb4b76549a7759e79bd44330cd9b885a Mon Sep 17 00:00:00 2001 From: Devi Priya Date: Wed, 17 May 2023 22:55:26 +0530 Subject: arm64: dts: qcom: ipq9574: Add SMPA1 regulator node Add support for SMPA1 regulator node in IPQ9574. Reviewed-by: Konrad Dybcio Co-developed-by: Praveenkumar I Signed-off-by: Praveenkumar I Signed-off-by: Devi Priya Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230517172527.1968-3-quic_devipriy@quicinc.com --- arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2ce8e09e7565..2b3ed8d351f7 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -29,6 +29,25 @@ status = "okay"; }; +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + &sdhc_1 { pinctrl-0 = <&sdc_default_state>; pinctrl-names = "default"; -- cgit v1.2.3