From f20a2afec50265851cf99bdea2869f2c60fdaf7c Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 2 Dec 2022 13:10:37 -0600 Subject: arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux [ Upstream commit 5225ba9db112ec4ed67da5e4d8b72e618573955e ] Early hardware did not support hardware handshaking on the UART, but final production hardware did. When the hardware was updated the chip select was changed to facilitate hardware handshaking on UART3. Fix the ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the EEPROM to operate again. Fixes: 4ce01ce36d77 ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3") Signed-off-by: Adam Ford Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi index 03266bd90a06..169f047fbca5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi @@ -120,7 +120,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_espi2>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; eeprom@0 { @@ -316,7 +316,7 @@ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 - MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x41 >; }; -- cgit v1.2.3