From fd247447c1d94a79d5cfc647430784306b3a8323 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 8 Jun 2010 10:49:08 +0200 Subject: ACPI / ACPICA: Fix low-level GPE manipulation code ACPICA uses acpi_ev_enable_gpe() for enabling GPEs at the low level, which is incorrect, because this function only enables the GPE if the corresponding bit in its enable register's enable_for_run mask is set. This causes acpi_set_gpe() to work incorrectly if used for enabling GPEs that were not previously enabled with acpi_enable_gpe(). As a result, among other things, wakeup-only GPEs are never enabled by acpi_enable_wakeup_device(), so the devices that use them are unable to wake up the system. To fix this issue remove acpi_ev_enable_gpe() and its counterpart acpi_ev_disable_gpe() and replace acpi_hw_low_disable_gpe() with acpi_hw_low_set_gpe() that will be used instead to manipulate GPE enable bits at the low level. Make the users of acpi_ev_enable_gpe() and acpi_ev_disable_gpe() call acpi_hw_low_set_gpe() instead and make sure that GPE enable masks are only updated by acpi_enable_gpe() and acpi_disable_gpe() when GPE reference counters change from 0 to 1 and from 1 to 0, respectively. Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/evgpe.c | 108 +------------------------------------------- 1 file changed, 2 insertions(+), 106 deletions(-) (limited to 'drivers/acpi/acpica/evgpe.c') diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index 57eeb3bde41e..66cd03835d6e 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -99,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_OK); } -/******************************************************************************* - * - * FUNCTION: acpi_ev_enable_gpe - * - * PARAMETERS: gpe_event_info - GPE to enable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless - * of type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - - ACPI_FUNCTION_TRACE(ev_enable_gpe); - - - /* - * We will only allow a GPE to be enabled if it has either an - * associated method (_Lxx/_Exx) or a handler. Otherwise, the - * GPE will be immediately disabled by acpi_ev_gpe_dispatch the - * first time it fires. - */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { - return_ACPI_STATUS(AE_NO_HANDLER); - } - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Clear the GPE (of stale events) */ - - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable the requested GPE */ - - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_disable_gpe - * - * PARAMETERS: gpe_event_info - GPE to disable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE, - * regardless of the type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_disable_gpe); - - - /* - * Note: Always disable the GPE, even if we think that that it is already - * disabled. It is possible that the AML or some other code has enabled - * the GPE behind our back. - */ - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * Always H/W disable this GPE, even if we don't know the GPE type. - * Simply clear the enable bit for this particular GPE, but do not - * write out the current GPE enable mask since this may inadvertently - * enable GPEs too early. An example is a rogue GPE that has arrived - * during ACPICA initialization - possibly because AML or other code - * has enabled the GPE. - */ - status = acpi_hw_low_disable_gpe(gpe_event_info); - return_ACPI_STATUS(status); -} - /******************************************************************************* * @@ -450,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* Update the GPE register masks for return to enabled state */ - - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); - /* * Take a snapshot of the GPE info for this level - we copy the info to * prevent a race condition with remove_handler/remove_block. @@ -606,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE, so it doesn't keep firing before the method has a * chance to run (it runs asynchronously with interrupts enabled). */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", @@ -643,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE. The GPE will remain disabled a handler * is installed or ACPICA is restarted. */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", -- cgit v1.2.3