From 4d2e4980a5289ae31a1cff40d258b68573182a37 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Fri, 14 Oct 2022 18:05:38 +0900 Subject: ata: libata: cleanup fua support detection Move the detection of a device FUA support from ata_scsiop_mode_sense()/ata_dev_supports_fua() to device scan time in ata_dev_configure(). The function ata_dev_config_fua() is introduced to detect if a device supports FUA and this support is indicated using the new device flag ATA_DFLAG_FUA. In order to blacklist known buggy devices, the horkage flag ATA_HORKAGE_NO_FUA is introduced. Similarly to other horkage flags, the libata.force= arguments "fua" and "nofua" are also introduced to allow a user to control this horkage flag through the "force" libata module parameter. The ATA_DFLAG_FUA device flag is set only and only if all the following conditions are met: * libata.fua module parameter is set to 1 * The device supports the WRITE DMA FUA EXT command, * The device is not marked with the ATA_HORKAGE_NO_FUA flag, either from the blacklist or set by the user with libata.force=nofua * The device supports NCQ (while this is not mandated by the standards, this restriction is introduced to avoid problems with older non-NCQ devices). Enabling or diabling libata FUA support for all devices can now also be done using the "force=[no]fua" module parameter when libata.fua is set to 1. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Niklas Cassel --- drivers/ata/libata-core.c | 30 +++++++++++++++++++++++++++++- drivers/ata/libata-scsi.c | 30 ++---------------------------- 2 files changed, 31 insertions(+), 29 deletions(-) (limited to 'drivers/ata') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1c16342dda08..d25a53a873dc 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2422,6 +2422,28 @@ static void ata_dev_config_chs(struct ata_device *dev) dev->heads, dev->sectors); } +static void ata_dev_config_fua(struct ata_device *dev) +{ + /* Ignore FUA support if its use is disabled globally */ + if (!libata_fua) + goto nofua; + + /* Ignore devices without support for WRITE DMA FUA EXT */ + if (!(dev->flags & ATA_DFLAG_LBA48) || !ata_id_has_fua(dev->id)) + goto nofua; + + /* Ignore known bad devices and devices that lack NCQ support */ + if (!ata_ncq_supported(dev) || (dev->horkage & ATA_HORKAGE_NO_FUA)) + goto nofua; + + dev->flags |= ATA_DFLAG_FUA; + + return; + +nofua: + dev->flags &= ~ATA_DFLAG_FUA; +} + static void ata_dev_config_devslp(struct ata_device *dev) { u8 *sata_setting = dev->link->ap->sector_buf; @@ -2510,7 +2532,8 @@ static void ata_dev_print_features(struct ata_device *dev) return; ata_dev_info(dev, - "Features:%s%s%s%s%s%s\n", + "Features:%s%s%s%s%s%s%s\n", + dev->flags & ATA_DFLAG_FUA ? " FUA" : "", dev->flags & ATA_DFLAG_TRUSTED ? " Trust" : "", dev->flags & ATA_DFLAG_DA ? " Dev-Attention" : "", dev->flags & ATA_DFLAG_DEVSLP ? " Dev-Sleep" : "", @@ -2671,6 +2694,7 @@ int ata_dev_configure(struct ata_device *dev) ata_dev_config_chs(dev); } + ata_dev_config_fua(dev); ata_dev_config_devslp(dev); ata_dev_config_sense_reporting(dev); ata_dev_config_zac(dev); @@ -4105,6 +4129,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { */ { "SATADOM-ML 3ME", NULL, ATA_HORKAGE_NO_LOG_DIR }, + /* Buggy FUA */ + { "Maxtor", "BANC1G10", ATA_HORKAGE_NO_FUA }, + /* End Marker */ { } }; @@ -6216,6 +6243,7 @@ static const struct ata_force_param force_tbl[] __initconst = { force_horkage_onoff(lpm, ATA_HORKAGE_NOLPM), force_horkage_onoff(setxfer, ATA_HORKAGE_NOSETXFER), force_horkage_on(dump_id, ATA_HORKAGE_DUMP_ID), + force_horkage_onoff(fua, ATA_HORKAGE_NO_FUA), force_horkage_on(disable, ATA_HORKAGE_DISABLE), }; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 46109bde8a04..aa338f10cef2 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2240,30 +2240,6 @@ static unsigned int ata_msense_rw_recovery(u8 *buf, bool changeable) return sizeof(def_rw_recovery_mpage); } -/* - * We can turn this into a real blacklist if it's needed, for now just - * blacklist any Maxtor BANC1G10 revision firmware - */ -static int ata_dev_supports_fua(u16 *id) -{ - unsigned char model[ATA_ID_PROD_LEN + 1], fw[ATA_ID_FW_REV_LEN + 1]; - - if (!libata_fua) - return 0; - if (!ata_id_has_fua(id)) - return 0; - - ata_id_c_string(id, model, ATA_ID_PROD, sizeof(model)); - ata_id_c_string(id, fw, ATA_ID_FW_REV, sizeof(fw)); - - if (strcmp(model, "Maxtor")) - return 1; - if (strcmp(fw, "BANC1G10")) - return 1; - - return 0; /* blacklisted */ -} - /** * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands * @args: device IDENTIFY data / SCSI command of interest. @@ -2287,7 +2263,7 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) }; u8 pg, spg; unsigned int ebd, page_control, six_byte; - u8 dpofua, bp = 0xff; + u8 dpofua = 0, bp = 0xff; u16 fp; six_byte = (scsicmd[0] == MODE_SENSE); @@ -2350,9 +2326,7 @@ static unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf) goto invalid_fld; } - dpofua = 0; - if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && - (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) + if (dev->flags & ATA_DFLAG_FUA) dpofua = 1 << 4; if (six_byte) { -- cgit v1.2.3