From 40dda3532f903107a063cd6ec1f15e10dd0eccc5 Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 26 Jan 2022 18:39:47 +0100
Subject: clk: starfive: jh7100: Don't round divisor up twice

The problem is best illustrated by an example. Suppose a consumer wants
a 4MHz clock rate from a divider with a 10MHz parent. It would then
call

  clk_round_rate(clk, 4000000)

which would call into our determine_rate() callback that correctly
rounds up and finds that a divisor of 3 gives the highest possible
frequency below the requested 4MHz and returns 10000000 / 3 = 3333333Hz.

However the consumer would then call

  clk_set_rate(clk, 3333333)

but since 3333333 doesn't divide 10000000 evenly our set_rate() callback
would again round the divisor up and set it to 4 which results in an
unnecessarily low rate of 2.5MHz.

Fix it by using DIV_ROUND_CLOSEST in the set_rate() callback.

Fixes: 4210be668a09 ("clk: starfive: Add JH7100 clock generator driver")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-2-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/starfive/clk-starfive-jh7100.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index 25d31afa0f87..db6a4dc203af 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -399,22 +399,13 @@ static unsigned long jh7100_clk_recalc_rate(struct clk_hw *hw,
 	return div ? parent_rate / div : 0;
 }
 
-static unsigned long jh7100_clk_bestdiv(struct jh7100_clk *clk,
-					unsigned long rate, unsigned long parent)
-{
-	unsigned long max = clk->max_div;
-	unsigned long div = DIV_ROUND_UP(parent, rate);
-
-	return min(div, max);
-}
-
 static int jh7100_clk_determine_rate(struct clk_hw *hw,
 				     struct clk_rate_request *req)
 {
 	struct jh7100_clk *clk = jh7100_clk_from(hw);
 	unsigned long parent = req->best_parent_rate;
 	unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
-	unsigned long div = jh7100_clk_bestdiv(clk, rate, parent);
+	unsigned long div = min_t(unsigned long, DIV_ROUND_UP(parent, rate), clk->max_div);
 	unsigned long result = parent / div;
 
 	/*
@@ -442,7 +433,8 @@ static int jh7100_clk_set_rate(struct clk_hw *hw,
 			       unsigned long parent_rate)
 {
 	struct jh7100_clk *clk = jh7100_clk_from(hw);
-	unsigned long div = jh7100_clk_bestdiv(clk, rate, parent_rate);
+	unsigned long div = clamp(DIV_ROUND_CLOSEST(parent_rate, rate),
+				  1UL, (unsigned long)clk->max_div);
 
 	jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, div);
 	return 0;
-- 
cgit v1.2.3


From 73bfc8d745a98744088cb30517399222674455b1 Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 26 Jan 2022 18:39:48 +0100
Subject: clk: starfive: jh7100: Handle audio_div clock properly

It turns out the audio_div clock is a fractional divider where the
lowest byte of the ctrl register is the integer part of the divider and
the 2nd byte is the number of 100th added to the divider.

The children of this clock is used by the audio peripherals for their
sample rate clock, so round to the closest possible rate rather than
always rounding down like regular dividers.

Fixes: 4210be668a09 ("clk: starfive: Add JH7100 clock generator driver")
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-3-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/starfive/clk-starfive-jh7100.c | 68 +++++++++++++++++++++++++++++-
 1 file changed, 67 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index db6a4dc203af..4b59338b5d7d 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -32,6 +32,13 @@
 #define JH7100_CLK_MUX_MASK	GENMASK(27, 24)
 #define JH7100_CLK_MUX_SHIFT	24
 #define JH7100_CLK_DIV_MASK	GENMASK(23, 0)
+#define JH7100_CLK_FRAC_MASK	GENMASK(15, 8)
+#define JH7100_CLK_FRAC_SHIFT	8
+#define JH7100_CLK_INT_MASK	GENMASK(7, 0)
+
+/* fractional divider min/max */
+#define JH7100_CLK_FRAC_MIN	100UL
+#define JH7100_CLK_FRAC_MAX	25599UL
 
 /* clock data */
 #define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = {		\
@@ -55,6 +62,13 @@
 	.parents = { [0] = _parent },					\
 }
 
+#define JH7100_FDIV(_idx, _name, _parent) [_idx] = {			\
+	.name = _name,							\
+	.flags = 0,							\
+	.max = JH7100_CLK_FRAC_MAX,					\
+	.parents = { [0] = _parent },					\
+}
+
 #define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = {		\
 	.name = _name,							\
 	.flags = 0,							\
@@ -225,7 +239,7 @@ static const struct {
 	JH7100__MUX(JH7100_CLK_USBPHY_25M, "usbphy_25m", 2,
 		    JH7100_CLK_OSC_SYS,
 		    JH7100_CLK_USBPHY_PLLDIV25M),
-	JH7100__DIV(JH7100_CLK_AUDIO_DIV, "audio_div", 131072, JH7100_CLK_AUDIO_ROOT),
+	JH7100_FDIV(JH7100_CLK_AUDIO_DIV, "audio_div", JH7100_CLK_AUDIO_ROOT),
 	JH7100_GATE(JH7100_CLK_AUDIO_SRC, "audio_src", 0, JH7100_CLK_AUDIO_DIV),
 	JH7100_GATE(JH7100_CLK_AUDIO_12288, "audio_12288", 0, JH7100_CLK_OSC_AUD),
 	JH7100_GDIV(JH7100_CLK_VIN_SRC, "vin_src", 0, 4, JH7100_CLK_VIN_ROOT),
@@ -440,6 +454,49 @@ static int jh7100_clk_set_rate(struct clk_hw *hw,
 	return 0;
 }
 
+static unsigned long jh7100_clk_frac_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct jh7100_clk *clk = jh7100_clk_from(hw);
+	u32 reg = jh7100_clk_reg_get(clk);
+	unsigned long div100 = 100 * (reg & JH7100_CLK_INT_MASK) +
+			       ((reg & JH7100_CLK_FRAC_MASK) >> JH7100_CLK_FRAC_SHIFT);
+
+	return (div100 >= JH7100_CLK_FRAC_MIN) ? 100 * parent_rate / div100 : 0;
+}
+
+static int jh7100_clk_frac_determine_rate(struct clk_hw *hw,
+					  struct clk_rate_request *req)
+{
+	unsigned long parent100 = 100 * req->best_parent_rate;
+	unsigned long rate = clamp(req->rate, req->min_rate, req->max_rate);
+	unsigned long div100 = clamp(DIV_ROUND_CLOSEST(parent100, rate),
+				     JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
+	unsigned long result = parent100 / div100;
+
+	/* clamp the result as in jh7100_clk_determine_rate() above */
+	if (result > req->max_rate && div100 < JH7100_CLK_FRAC_MAX)
+		result = parent100 / (div100 + 1);
+	if (result < req->min_rate && div100 > JH7100_CLK_FRAC_MIN)
+		result = parent100 / (div100 - 1);
+
+	req->rate = result;
+	return 0;
+}
+
+static int jh7100_clk_frac_set_rate(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct jh7100_clk *clk = jh7100_clk_from(hw);
+	unsigned long div100 = clamp(DIV_ROUND_CLOSEST(100 * parent_rate, rate),
+				     JH7100_CLK_FRAC_MIN, JH7100_CLK_FRAC_MAX);
+	u32 value = ((div100 % 100) << JH7100_CLK_FRAC_SHIFT) | (div100 / 100);
+
+	jh7100_clk_reg_rmw(clk, JH7100_CLK_DIV_MASK, value);
+	return 0;
+}
+
 static u8 jh7100_clk_get_parent(struct clk_hw *hw)
 {
 	struct jh7100_clk *clk = jh7100_clk_from(hw);
@@ -526,6 +583,13 @@ static const struct clk_ops jh7100_clk_div_ops = {
 	.debug_init = jh7100_clk_debug_init,
 };
 
+static const struct clk_ops jh7100_clk_fdiv_ops = {
+	.recalc_rate = jh7100_clk_frac_recalc_rate,
+	.determine_rate = jh7100_clk_frac_determine_rate,
+	.set_rate = jh7100_clk_frac_set_rate,
+	.debug_init = jh7100_clk_debug_init,
+};
+
 static const struct clk_ops jh7100_clk_gdiv_ops = {
 	.enable = jh7100_clk_enable,
 	.disable = jh7100_clk_disable,
@@ -564,6 +628,8 @@ static const struct clk_ops *__init jh7100_clk_ops(u32 max)
 	if (max & JH7100_CLK_DIV_MASK) {
 		if (max & JH7100_CLK_ENABLE)
 			return &jh7100_clk_gdiv_ops;
+		if (max == JH7100_CLK_FRAC_MAX)
+			return &jh7100_clk_fdiv_ops;
 		return &jh7100_clk_div_ops;
 	}
 
-- 
cgit v1.2.3


From 26ad971faa07951179ae6d39f91b6622da4d020c Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 26 Jan 2022 18:39:51 +0100
Subject: clk: starfive: jh7100: Make hw clock implementation reusable

The JH7100 has additional audio and video clocks at different memory
ranges, but they use the same register layout. Add a header and export
the starfive_jh7100_clk_ops function so the clock implementation can be
reused by drivers handling these clocks.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-6-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/starfive/clk-starfive-jh7100.c | 96 +++--------------------------
 drivers/clk/starfive/clk-starfive-jh7100.h | 97 ++++++++++++++++++++++++++++++
 2 files changed, 104 insertions(+), 89 deletions(-)
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h

(limited to 'drivers/clk')

diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index 4b59338b5d7d..a6708f9ebf4c 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -20,83 +20,15 @@
 
 #include <dt-bindings/clock/starfive-jh7100.h>
 
+#include "clk-starfive-jh7100.h"
+
 /* external clocks */
 #define JH7100_CLK_OSC_SYS		(JH7100_CLK_END + 0)
 #define JH7100_CLK_OSC_AUD		(JH7100_CLK_END + 1)
 #define JH7100_CLK_GMAC_RMII_REF	(JH7100_CLK_END + 2)
 #define JH7100_CLK_GMAC_GR_MII_RX	(JH7100_CLK_END + 3)
 
-/* register fields */
-#define JH7100_CLK_ENABLE	BIT(31)
-#define JH7100_CLK_INVERT	BIT(30)
-#define JH7100_CLK_MUX_MASK	GENMASK(27, 24)
-#define JH7100_CLK_MUX_SHIFT	24
-#define JH7100_CLK_DIV_MASK	GENMASK(23, 0)
-#define JH7100_CLK_FRAC_MASK	GENMASK(15, 8)
-#define JH7100_CLK_FRAC_SHIFT	8
-#define JH7100_CLK_INT_MASK	GENMASK(7, 0)
-
-/* fractional divider min/max */
-#define JH7100_CLK_FRAC_MIN	100UL
-#define JH7100_CLK_FRAC_MAX	25599UL
-
-/* clock data */
-#define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = {		\
-	.name = _name,							\
-	.flags = CLK_SET_RATE_PARENT | (_flags),			\
-	.max = JH7100_CLK_ENABLE,					\
-	.parents = { [0] = _parent },					\
-}
-
-#define JH7100__DIV(_idx, _name, _max, _parent) [_idx] = {		\
-	.name = _name,							\
-	.flags = 0,							\
-	.max = _max,							\
-	.parents = { [0] = _parent },					\
-}
-
-#define JH7100_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = {	\
-	.name = _name,							\
-	.flags = _flags,						\
-	.max = JH7100_CLK_ENABLE | (_max),				\
-	.parents = { [0] = _parent },					\
-}
-
-#define JH7100_FDIV(_idx, _name, _parent) [_idx] = {			\
-	.name = _name,							\
-	.flags = 0,							\
-	.max = JH7100_CLK_FRAC_MAX,					\
-	.parents = { [0] = _parent },					\
-}
-
-#define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = {		\
-	.name = _name,							\
-	.flags = 0,							\
-	.max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT,		\
-	.parents = { __VA_ARGS__ },					\
-}
-
-#define JH7100_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = {	\
-	.name = _name,							\
-	.flags = _flags,						\
-	.max = JH7100_CLK_ENABLE |					\
-		(((_nparents) - 1) << JH7100_CLK_MUX_SHIFT),		\
-	.parents = { __VA_ARGS__ },					\
-}
-
-#define JH7100__INV(_idx, _name, _parent) [_idx] = {			\
-	.name = _name,							\
-	.flags = CLK_SET_RATE_PARENT,					\
-	.max = JH7100_CLK_INVERT,					\
-	.parents = { [0] = _parent },					\
-}
-
-static const struct {
-	const char *name;
-	unsigned long flags;
-	u32 max;
-	u8 parents[4];
-} jh7100_clk_data[] __initconst = {
+static const struct jh7100_clk_data jh7100_clk_data[] __initconst = {
 	JH7100__MUX(JH7100_CLK_CPUNDBUS_ROOT, "cpundbus_root", 4,
 		    JH7100_CLK_OSC_SYS,
 		    JH7100_CLK_PLL0_OUT,
@@ -337,21 +269,6 @@ static const struct {
 	JH7100_GATE(JH7100_CLK_SYSERR_APB, "syserr_apb", 0, JH7100_CLK_APB2_BUS),
 };
 
-struct jh7100_clk {
-	struct clk_hw hw;
-	unsigned int idx;
-	unsigned int max_div;
-};
-
-struct jh7100_clk_priv {
-	/* protect clk enable and set rate/parent from happening at the same time */
-	spinlock_t rmw_lock;
-	struct device *dev;
-	void __iomem *base;
-	struct clk_hw *pll[3];
-	struct jh7100_clk reg[JH7100_CLK_PLL0_OUT];
-};
-
 static struct jh7100_clk *jh7100_clk_from(struct clk_hw *hw)
 {
 	return container_of(hw, struct jh7100_clk, hw);
@@ -623,7 +540,7 @@ static const struct clk_ops jh7100_clk_inv_ops = {
 	.debug_init = jh7100_clk_debug_init,
 };
 
-static const struct clk_ops *__init jh7100_clk_ops(u32 max)
+const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
 {
 	if (max & JH7100_CLK_DIV_MASK) {
 		if (max & JH7100_CLK_ENABLE)
@@ -644,6 +561,7 @@ static const struct clk_ops *__init jh7100_clk_ops(u32 max)
 
 	return &jh7100_clk_inv_ops;
 }
+EXPORT_SYMBOL_GPL(starfive_jh7100_clk_ops);
 
 static struct clk_hw *jh7100_clk_get(struct of_phandle_args *clkspec, void *data)
 {
@@ -665,7 +583,7 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
 	unsigned int idx;
 	int ret;
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, reg, JH7100_CLK_PLL0_OUT), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
@@ -695,7 +613,7 @@ static int __init clk_starfive_jh7100_probe(struct platform_device *pdev)
 		struct clk_parent_data parents[4] = {};
 		struct clk_init_data init = {
 			.name = jh7100_clk_data[idx].name,
-			.ops = jh7100_clk_ops(max),
+			.ops = starfive_jh7100_clk_ops(max),
 			.parent_data = parents,
 			.num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
 			.flags = jh7100_clk_data[idx].flags,
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.h b/drivers/clk/starfive/clk-starfive-jh7100.h
new file mode 100644
index 000000000000..8eccd8c0a746
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7100.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CLK_STARFIVE_JH7100_H
+#define __CLK_STARFIVE_JH7100_H
+
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+
+/* register fields */
+#define JH7100_CLK_ENABLE	BIT(31)
+#define JH7100_CLK_INVERT	BIT(30)
+#define JH7100_CLK_MUX_MASK	GENMASK(27, 24)
+#define JH7100_CLK_MUX_SHIFT	24
+#define JH7100_CLK_DIV_MASK	GENMASK(23, 0)
+#define JH7100_CLK_FRAC_MASK	GENMASK(15, 8)
+#define JH7100_CLK_FRAC_SHIFT	8
+#define JH7100_CLK_INT_MASK	GENMASK(7, 0)
+
+/* fractional divider min/max */
+#define JH7100_CLK_FRAC_MIN	100UL
+#define JH7100_CLK_FRAC_MAX	25599UL
+
+/* clock data */
+struct jh7100_clk_data {
+	const char *name;
+	unsigned long flags;
+	u32 max;
+	u8 parents[4];
+};
+
+#define JH7100_GATE(_idx, _name, _flags, _parent) [_idx] = {			\
+	.name = _name,								\
+	.flags = CLK_SET_RATE_PARENT | (_flags),				\
+	.max = JH7100_CLK_ENABLE,						\
+	.parents = { [0] = _parent },						\
+}
+
+#define JH7100__DIV(_idx, _name, _max, _parent) [_idx] = {			\
+	.name = _name,								\
+	.flags = 0,								\
+	.max = _max,								\
+	.parents = { [0] = _parent },						\
+}
+
+#define JH7100_GDIV(_idx, _name, _flags, _max, _parent) [_idx] = {		\
+	.name = _name,								\
+	.flags = _flags,							\
+	.max = JH7100_CLK_ENABLE | (_max),					\
+	.parents = { [0] = _parent },						\
+}
+
+#define JH7100_FDIV(_idx, _name, _parent) [_idx] = {				\
+	.name = _name,								\
+	.flags = 0,								\
+	.max = JH7100_CLK_FRAC_MAX,						\
+	.parents = { [0] = _parent },						\
+}
+
+#define JH7100__MUX(_idx, _name, _nparents, ...) [_idx] = {			\
+	.name = _name,								\
+	.flags = 0,								\
+	.max = ((_nparents) - 1) << JH7100_CLK_MUX_SHIFT,			\
+	.parents = { __VA_ARGS__ },						\
+}
+
+#define JH7100_GMUX(_idx, _name, _flags, _nparents, ...) [_idx] = {		\
+	.name = _name,								\
+	.flags = _flags,							\
+	.max = JH7100_CLK_ENABLE |						\
+		(((_nparents) - 1) << JH7100_CLK_MUX_SHIFT),			\
+	.parents = { __VA_ARGS__ },						\
+}
+
+#define JH7100__INV(_idx, _name, _parent) [_idx] = {				\
+	.name = _name,								\
+	.flags = CLK_SET_RATE_PARENT,						\
+	.max = JH7100_CLK_INVERT,						\
+	.parents = { [0] = _parent },						\
+}
+
+struct jh7100_clk {
+	struct clk_hw hw;
+	unsigned int idx;
+	unsigned int max_div;
+};
+
+struct jh7100_clk_priv {
+	/* protect clk enable and set rate/parent from happening at the same time */
+	spinlock_t rmw_lock;
+	struct device *dev;
+	void __iomem *base;
+	struct clk_hw *pll[3];
+	struct jh7100_clk reg[];
+};
+
+const struct clk_ops *starfive_jh7100_clk_ops(u32 max);
+
+#endif
-- 
cgit v1.2.3


From 8c373f8c793cc1bb8f708433dcb8343ba078bd17 Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 26 Jan 2022 18:39:52 +0100
Subject: clk: starfive: jh7100: Support more clock types

Unlike the system clocks there are audio clocks that combine both
multiplexer/divider and gate/multiplexer/divider, so add support for
that.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-7-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/starfive/clk-starfive-jh7100.c | 26 ++++++++++++++++++++++++++
 drivers/clk/starfive/clk-starfive-jh7100.h | 15 +++++++++++++++
 2 files changed, 41 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/starfive/clk-starfive-jh7100.c b/drivers/clk/starfive/clk-starfive-jh7100.c
index a6708f9ebf4c..691aeebc7092 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.c
+++ b/drivers/clk/starfive/clk-starfive-jh7100.c
@@ -534,6 +534,27 @@ static const struct clk_ops jh7100_clk_gmux_ops = {
 	.debug_init = jh7100_clk_debug_init,
 };
 
+static const struct clk_ops jh7100_clk_mdiv_ops = {
+	.recalc_rate = jh7100_clk_recalc_rate,
+	.determine_rate = jh7100_clk_determine_rate,
+	.get_parent = jh7100_clk_get_parent,
+	.set_parent = jh7100_clk_set_parent,
+	.set_rate = jh7100_clk_set_rate,
+	.debug_init = jh7100_clk_debug_init,
+};
+
+static const struct clk_ops jh7100_clk_gmd_ops = {
+	.enable = jh7100_clk_enable,
+	.disable = jh7100_clk_disable,
+	.is_enabled = jh7100_clk_is_enabled,
+	.recalc_rate = jh7100_clk_recalc_rate,
+	.determine_rate = jh7100_clk_determine_rate,
+	.get_parent = jh7100_clk_get_parent,
+	.set_parent = jh7100_clk_set_parent,
+	.set_rate = jh7100_clk_set_rate,
+	.debug_init = jh7100_clk_debug_init,
+};
+
 static const struct clk_ops jh7100_clk_inv_ops = {
 	.get_phase = jh7100_clk_get_phase,
 	.set_phase = jh7100_clk_set_phase,
@@ -543,6 +564,11 @@ static const struct clk_ops jh7100_clk_inv_ops = {
 const struct clk_ops *starfive_jh7100_clk_ops(u32 max)
 {
 	if (max & JH7100_CLK_DIV_MASK) {
+		if (max & JH7100_CLK_MUX_MASK) {
+			if (max & JH7100_CLK_ENABLE)
+				return &jh7100_clk_gmd_ops;
+			return &jh7100_clk_mdiv_ops;
+		}
 		if (max & JH7100_CLK_ENABLE)
 			return &jh7100_clk_gdiv_ops;
 		if (max == JH7100_CLK_FRAC_MAX)
diff --git a/drivers/clk/starfive/clk-starfive-jh7100.h b/drivers/clk/starfive/clk-starfive-jh7100.h
index 8eccd8c0a746..f116be5740a5 100644
--- a/drivers/clk/starfive/clk-starfive-jh7100.h
+++ b/drivers/clk/starfive/clk-starfive-jh7100.h
@@ -70,6 +70,21 @@ struct jh7100_clk_data {
 	.parents = { __VA_ARGS__ },						\
 }
 
+#define JH7100_MDIV(_idx, _name, _max, _nparents, ...) [_idx] = {		\
+	.name = _name,								\
+	.flags = 0,								\
+	.max = (((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max),		\
+	.parents = { __VA_ARGS__ },						\
+}
+
+#define JH7100__GMD(_idx, _name, _flags, _max, _nparents, ...) [_idx] = {	\
+	.name = _name,								\
+	.flags = _flags,							\
+	.max = JH7100_CLK_ENABLE |						\
+		(((_nparents) - 1) << JH7100_CLK_MUX_SHIFT) | (_max),		\
+	.parents = { __VA_ARGS__ },						\
+}
+
 #define JH7100__INV(_idx, _name, _parent) [_idx] = {				\
 	.name = _name,								\
 	.flags = CLK_SET_RATE_PARENT,						\
-- 
cgit v1.2.3


From 3028181ea3b8e2054d62dc013318c44f93333248 Mon Sep 17 00:00:00 2001
From: Emil Renner Berthing <kernel@esmil.dk>
Date: Wed, 26 Jan 2022 18:39:53 +0100
Subject: clk: starfive: Add JH7100 audio clock driver

Add a driver for the audio clocks on the Starfive JH7100 RISC-V SoC.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220126173953.1016706-8-kernel@esmil.dk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 MAINTAINERS                                      |   8 +-
 drivers/clk/starfive/Kconfig                     |   8 ++
 drivers/clk/starfive/Makefile                    |   1 +
 drivers/clk/starfive/clk-starfive-jh7100-audio.c | 170 +++++++++++++++++++++++
 4 files changed, 183 insertions(+), 4 deletions(-)
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7100-audio.c

(limited to 'drivers/clk')

diff --git a/MAINTAINERS b/MAINTAINERS
index ea3e6c914384..19a855f3fdca 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18376,12 +18376,12 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/ethernet/adaptec/starfire*
 
-STARFIVE JH7100 CLOCK DRIVER
+STARFIVE JH7100 CLOCK DRIVERS
 M:	Emil Renner Berthing <kernel@esmil.dk>
 S:	Maintained
-F:	Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
-F:	drivers/clk/starfive/clk-starfive-jh7100.c
-F:	include/dt-bindings/clock/starfive-jh7100.h
+F:	Documentation/devicetree/bindings/clock/starfive,jh7100-*.yaml
+F:	drivers/clk/starfive/clk-starfive-jh7100*
+F:	include/dt-bindings/clock/starfive-jh7100*.h
 
 STARFIVE JH7100 PINCTRL DRIVER
 M:	Emil Renner Berthing <kernel@esmil.dk>
diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
index c0fa9d5e641f..003bd2d56ce7 100644
--- a/drivers/clk/starfive/Kconfig
+++ b/drivers/clk/starfive/Kconfig
@@ -7,3 +7,11 @@ config CLK_STARFIVE_JH7100
 	help
 	  Say yes here to support the clock controller on the StarFive JH7100
 	  SoC.
+
+config CLK_STARFIVE_JH7100_AUDIO
+	tristate "StarFive JH7100 audio clock support"
+	depends on CLK_STARFIVE_JH7100
+	default m if SOC_STARFIVE
+	help
+	  Say Y or M here to support the audio clocks on the StarFive JH7100
+	  SoC.
diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
index 09759cc73530..0fa8ecb9ec1c 100644
--- a/drivers/clk/starfive/Makefile
+++ b/drivers/clk/starfive/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 # StarFive Clock
 obj-$(CONFIG_CLK_STARFIVE_JH7100)	+= clk-starfive-jh7100.o
+obj-$(CONFIG_CLK_STARFIVE_JH7100_AUDIO)	+= clk-starfive-jh7100-audio.o
diff --git a/drivers/clk/starfive/clk-starfive-jh7100-audio.c b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
new file mode 100644
index 000000000000..8473a65e219b
--- /dev/null
+++ b/drivers/clk/starfive/clk-starfive-jh7100-audio.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH7100 Audio Clock Driver
+ *
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/starfive-jh7100-audio.h>
+
+#include "clk-starfive-jh7100.h"
+
+/* external clocks */
+#define JH7100_AUDCLK_AUDIO_SRC			(JH7100_AUDCLK_END + 0)
+#define JH7100_AUDCLK_AUDIO_12288		(JH7100_AUDCLK_END + 1)
+#define JH7100_AUDCLK_DOM7AHB_BUS		(JH7100_AUDCLK_END + 2)
+#define JH7100_AUDCLK_I2SADC_BCLK_IOPAD		(JH7100_AUDCLK_END + 3)
+#define JH7100_AUDCLK_I2SADC_LRCLK_IOPAD	(JH7100_AUDCLK_END + 4)
+#define JH7100_AUDCLK_I2SDAC_BCLK_IOPAD		(JH7100_AUDCLK_END + 5)
+#define JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD	(JH7100_AUDCLK_END + 6)
+#define JH7100_AUDCLK_VAD_INTMEM                (JH7100_AUDCLK_END + 7)
+
+static const struct jh7100_clk_data jh7100_audclk_data[] = {
+	JH7100__GMD(JH7100_AUDCLK_ADC_MCLK, "adc_mclk", 0, 15, 2,
+		    JH7100_AUDCLK_AUDIO_SRC,
+		    JH7100_AUDCLK_AUDIO_12288),
+	JH7100__GMD(JH7100_AUDCLK_I2S1_MCLK, "i2s1_mclk", 0, 15, 2,
+		    JH7100_AUDCLK_AUDIO_SRC,
+		    JH7100_AUDCLK_AUDIO_12288),
+	JH7100_GATE(JH7100_AUDCLK_I2SADC_APB, "i2sadc_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100_MDIV(JH7100_AUDCLK_I2SADC_BCLK, "i2sadc_bclk", 31, 2,
+		    JH7100_AUDCLK_ADC_MCLK,
+		    JH7100_AUDCLK_I2SADC_BCLK_IOPAD),
+	JH7100__INV(JH7100_AUDCLK_I2SADC_BCLK_N, "i2sadc_bclk_n", JH7100_AUDCLK_I2SADC_BCLK),
+	JH7100_MDIV(JH7100_AUDCLK_I2SADC_LRCLK, "i2sadc_lrclk", 63, 3,
+		    JH7100_AUDCLK_I2SADC_BCLK_N,
+		    JH7100_AUDCLK_I2SADC_LRCLK_IOPAD,
+		    JH7100_AUDCLK_I2SADC_BCLK),
+	JH7100_GATE(JH7100_AUDCLK_PDM_APB, "pdm_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100__GMD(JH7100_AUDCLK_PDM_MCLK, "pdm_mclk", 0, 15, 2,
+		    JH7100_AUDCLK_AUDIO_SRC,
+		    JH7100_AUDCLK_AUDIO_12288),
+	JH7100_GATE(JH7100_AUDCLK_I2SVAD_APB, "i2svad_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100__GMD(JH7100_AUDCLK_SPDIF, "spdif", 0, 15, 2,
+		    JH7100_AUDCLK_AUDIO_SRC,
+		    JH7100_AUDCLK_AUDIO_12288),
+	JH7100_GATE(JH7100_AUDCLK_SPDIF_APB, "spdif_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100_GATE(JH7100_AUDCLK_PWMDAC_APB, "pwmdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100__GMD(JH7100_AUDCLK_DAC_MCLK, "dac_mclk", 0, 15, 2,
+		    JH7100_AUDCLK_AUDIO_SRC,
+		    JH7100_AUDCLK_AUDIO_12288),
+	JH7100_GATE(JH7100_AUDCLK_I2SDAC_APB, "i2sdac_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100_MDIV(JH7100_AUDCLK_I2SDAC_BCLK, "i2sdac_bclk", 31, 2,
+		    JH7100_AUDCLK_DAC_MCLK,
+		    JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
+	JH7100__INV(JH7100_AUDCLK_I2SDAC_BCLK_N, "i2sdac_bclk_n", JH7100_AUDCLK_I2SDAC_BCLK),
+	JH7100_MDIV(JH7100_AUDCLK_I2SDAC_LRCLK, "i2sdac_lrclk", 31, 2,
+		    JH7100_AUDCLK_I2S1_MCLK,
+		    JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
+	JH7100_GATE(JH7100_AUDCLK_I2S1_APB, "i2s1_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100_MDIV(JH7100_AUDCLK_I2S1_BCLK, "i2s1_bclk", 31, 2,
+		    JH7100_AUDCLK_I2S1_MCLK,
+		    JH7100_AUDCLK_I2SDAC_BCLK_IOPAD),
+	JH7100__INV(JH7100_AUDCLK_I2S1_BCLK_N, "i2s1_bclk_n", JH7100_AUDCLK_I2S1_BCLK),
+	JH7100_MDIV(JH7100_AUDCLK_I2S1_LRCLK, "i2s1_lrclk", 63, 3,
+		    JH7100_AUDCLK_I2S1_BCLK_N,
+		    JH7100_AUDCLK_I2SDAC_LRCLK_IOPAD),
+	JH7100_GATE(JH7100_AUDCLK_I2SDAC16K_APB, "i2s1dac16k_apb", 0, JH7100_AUDCLK_APB0_BUS),
+	JH7100__DIV(JH7100_AUDCLK_APB0_BUS, "apb0_bus", 8, JH7100_AUDCLK_DOM7AHB_BUS),
+	JH7100_GATE(JH7100_AUDCLK_DMA1P_AHB, "dma1p_ahb", 0, JH7100_AUDCLK_DOM7AHB_BUS),
+	JH7100_GATE(JH7100_AUDCLK_USB_APB, "usb_apb", CLK_IGNORE_UNUSED, JH7100_AUDCLK_APB_EN),
+	JH7100_GDIV(JH7100_AUDCLK_USB_LPM, "usb_lpm", CLK_IGNORE_UNUSED, 4, JH7100_AUDCLK_USB_APB),
+	JH7100_GDIV(JH7100_AUDCLK_USB_STB, "usb_stb", CLK_IGNORE_UNUSED, 3, JH7100_AUDCLK_USB_APB),
+	JH7100__DIV(JH7100_AUDCLK_APB_EN, "apb_en", 8, JH7100_AUDCLK_DOM7AHB_BUS),
+	JH7100__MUX(JH7100_AUDCLK_VAD_MEM, "vad_mem", 2,
+		    JH7100_AUDCLK_VAD_INTMEM,
+		    JH7100_AUDCLK_AUDIO_12288),
+};
+
+static struct clk_hw *jh7100_audclk_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct jh7100_clk_priv *priv = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx < JH7100_AUDCLK_END)
+		return &priv->reg[idx].hw;
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int jh7100_audclk_probe(struct platform_device *pdev)
+{
+	struct jh7100_clk_priv *priv;
+	unsigned int idx;
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, reg, JH7100_AUDCLK_END), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->rmw_lock);
+	priv->dev = &pdev->dev;
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	for (idx = 0; idx < JH7100_AUDCLK_END; idx++) {
+		u32 max = jh7100_audclk_data[idx].max;
+		struct clk_parent_data parents[4] = {};
+		struct clk_init_data init = {
+			.name = jh7100_audclk_data[idx].name,
+			.ops = starfive_jh7100_clk_ops(max),
+			.parent_data = parents,
+			.num_parents = ((max & JH7100_CLK_MUX_MASK) >> JH7100_CLK_MUX_SHIFT) + 1,
+			.flags = jh7100_audclk_data[idx].flags,
+		};
+		struct jh7100_clk *clk = &priv->reg[idx];
+		unsigned int i;
+
+		for (i = 0; i < init.num_parents; i++) {
+			unsigned int pidx = jh7100_audclk_data[idx].parents[i];
+
+			if (pidx < JH7100_AUDCLK_END)
+				parents[i].hw = &priv->reg[pidx].hw;
+			else if (pidx == JH7100_AUDCLK_AUDIO_SRC)
+				parents[i].fw_name = "audio_src";
+			else if (pidx == JH7100_AUDCLK_AUDIO_12288)
+				parents[i].fw_name = "audio_12288";
+			else if (pidx == JH7100_AUDCLK_DOM7AHB_BUS)
+				parents[i].fw_name = "dom7ahb_bus";
+		}
+
+		clk->hw.init = &init;
+		clk->idx = idx;
+		clk->max_div = max & JH7100_CLK_DIV_MASK;
+
+		ret = devm_clk_hw_register(priv->dev, &clk->hw);
+		if (ret)
+			return ret;
+	}
+
+	return devm_of_clk_add_hw_provider(priv->dev, jh7100_audclk_get, priv);
+}
+
+static const struct of_device_id jh7100_audclk_match[] = {
+	{ .compatible = "starfive,jh7100-audclk" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, jh7100_audclk_match);
+
+static struct platform_driver jh7100_audclk_driver = {
+	.probe = jh7100_audclk_probe,
+	.driver = {
+		.name = "clk-starfive-jh7100-audio",
+		.of_match_table = jh7100_audclk_match,
+	},
+};
+module_platform_driver(jh7100_audclk_driver);
+
+MODULE_AUTHOR("Emil Renner Berthing");
+MODULE_DESCRIPTION("StarFive JH7100 audio clock driver");
+MODULE_LICENSE("GPL v2");
-- 
cgit v1.2.3


From 78ab3a9a3d57193f7080422aea30bf5905608b7d Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:42 +0200
Subject: clk: ti: Constify clkctrl_name

We can constify clkctrl_name in preparation for making use of the
clock-output-names property.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-2-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 864c484bde1b..0049828db0e9 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -505,7 +505,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 	struct omap_clkctrl_clk *clkctrl_clk = NULL;
 	const __be32 *addrp;
 	bool legacy_naming;
-	char *clkctrl_name;
+	const char *clkctrl_name;
 	u32 addr;
 	int ret;
 	char *c;
-- 
cgit v1.2.3


From 80864594ff2ad002e2755daf97d46ff0c86faf1f Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:43 +0200
Subject: clk: ti: Preserve node in ti_dt_clocks_register()

In preparation for making use of the clock-output-names, we want to
keep node around in ti_dt_clocks_register().

This change should not needed as a fix currently.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-3-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clk.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 3da33c786d77..29eafab4353e 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -131,7 +131,7 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
 void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 {
 	struct ti_dt_clk *c;
-	struct device_node *node, *parent;
+	struct device_node *node, *parent, *child;
 	struct clk *clk;
 	struct of_phandle_args clkspec;
 	char buf[64];
@@ -171,10 +171,13 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 		node = of_find_node_by_name(NULL, buf);
 		if (num_args && compat_mode) {
 			parent = node;
-			node = of_get_child_by_name(parent, "clock");
-			if (!node)
-				node = of_get_child_by_name(parent, "clk");
-			of_node_put(parent);
+			child = of_get_child_by_name(parent, "clock");
+			if (!child)
+				child = of_get_child_by_name(parent, "clk");
+			if (child) {
+				of_node_put(parent);
+				node = child;
+			}
 		}
 
 		clkspec.np = node;
-- 
cgit v1.2.3


From 274d679810dab8a7dd5042826979d6ef014007a5 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:44 +0200
Subject: clk: ti: Optionally parse IO address from parent clock node

If no reg property is specified for a TI clock, let's try to use the
parent clock node IO address. This way we can avoid duplicate devicetree
reg properties that cause warnings for unique_unit_address.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-4-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clk.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 29eafab4353e..a0ddf16f0eca 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -274,6 +274,8 @@ int ti_clk_get_reg_addr(struct device_node *node, int index,
 	for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
 		if (clocks_node_ptr[i] == node->parent)
 			break;
+		if (clocks_node_ptr[i] == node->parent->parent)
+			break;
 	}
 
 	if (i == CLK_MAX_MEMMAPS) {
@@ -284,8 +286,12 @@ int ti_clk_get_reg_addr(struct device_node *node, int index,
 	reg->index = i;
 
 	if (of_property_read_u32_index(node, "reg", index, &val)) {
-		pr_err("%pOFn must have reg[%d]!\n", node, index);
-		return -EINVAL;
+		if (of_property_read_u32_index(node->parent, "reg",
+					       index, &val)) {
+			pr_err("%pOFn or parent must have reg[%d]!\n",
+			       node, index);
+			return -EINVAL;
+		}
 	}
 
 	reg->offset = val;
-- 
cgit v1.2.3


From 51f661ef9a106e908097262ff5034a85ce15b122 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:45 +0200
Subject: clk: ti: Add ti_find_clock_provider() to use clock-output-names

Let's add ti_find_clock_provider() so we can use clock-output-names
to name the clock provider instead of relying on non-standard devicetree
node names.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-5-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clk.c | 43 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 41 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index a0ddf16f0eca..6fcbd801e8f1 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -119,12 +119,51 @@ int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
 	return 0;
 }
 
+/*
+ * Eventually we could standardize to using '_' for clk-*.c files to follow the
+ * TRM naming and leave out the tmp name here.
+ */
+static struct device_node *ti_find_clock_provider(struct device_node *from,
+						  const char *name)
+{
+	struct device_node *np;
+	bool found = false;
+	const char *n;
+	char *tmp;
+
+	tmp = kstrdup(name, GFP_KERNEL);
+	if (!tmp)
+		return NULL;
+	strreplace(tmp, '-', '_');
+
+	/* Node named "clock" with "clock-output-names" */
+	for_each_of_allnodes_from(from, np) {
+		if (of_property_read_string_index(np, "clock-output-names",
+						  0, &n))
+			continue;
+
+		if (!strncmp(n, tmp, strlen(tmp))) {
+			found = true;
+			break;
+		}
+	}
+	of_node_put(from);
+	kfree(tmp);
+
+	if (found)
+		return np;
+
+	/* Fall back to using old node name base provider name */
+	return of_find_node_by_name(from, name);
+}
+
 /**
  * ti_dt_clocks_register - register DT alias clocks during boot
  * @oclks: list of clocks to register
  *
  * Register alias or non-standard DT clock entries during boot. By
- * default, DT clocks are found based on their node name. If any
+ * default, DT clocks are found based on their clock-output-names
+ * property, or the clock node name for legacy cases. If any
  * additional con-id / dev-id -> clock mapping is required, use this
  * function to list these.
  */
@@ -168,7 +207,7 @@ void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
 		if (num_args && clkctrl_nodes_missing)
 			continue;
 
-		node = of_find_node_by_name(NULL, buf);
+		node = ti_find_clock_provider(NULL, buf);
 		if (num_args && compat_mode) {
 			parent = node;
 			child = of_get_child_by_name(parent, "clock");
-- 
cgit v1.2.3


From d02747e9894c66940db6859c273ab3000c730a93 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:46 +0200
Subject: clk: ti: Use clock-output-names for clkctrl

Use clock-output-names devicetree property for clkctrl clocks if
available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-6-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 0049828db0e9..535f35b21204 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -469,14 +469,32 @@ static void __init _clkctrl_add_provider(void *data,
 	of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data);
 }
 
-/* Get clock name based on compatible string for clkctrl */
-static char * __init clkctrl_get_name(struct device_node *np)
+/*
+ * Get clock name based on "clock-output-names" property or the
+ * compatible property for clkctrl.
+ */
+static const char * __init clkctrl_get_name(struct device_node *np)
 {
 	struct property *prop;
 	const int prefix_len = 11;
 	const char *compat;
+	const char *output;
 	char *name;
 
+	if (!of_property_read_string_index(np, "clock-output-names", 0,
+					   &output)) {
+		const char *end;
+		int len;
+
+		len = strlen(output);
+		end = strstr(output, "_clkctrl");
+		if (end)
+			len -= strlen(end);
+		name = kstrndup(output, len, GFP_KERNEL);
+
+		return name;
+	}
+
 	of_property_for_each_string(np, "compatible", prop, compat) {
 		if (!strncmp("ti,clkctrl-", compat, prefix_len)) {
 			/* Two letter minimum name length for l3, l4 etc */
-- 
cgit v1.2.3


From 2c1593328d7f02fe49de5ad6b42c36296c9d6922 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:47 +0200
Subject: clk: ti: Add ti_dt_clk_name() helper to use clock-output-names

Let's create the clock alias based on the clock-output-names property if
available. Also the component clock drivers can use ti_dt_clk_name() in
the following patches.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-7-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clk.c   | 20 +++++++++++++++++++-
 drivers/clk/ti/clock.h |  1 +
 2 files changed, 20 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index 6fcbd801e8f1..3463579220b5 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -447,6 +447,24 @@ static const struct of_device_id simple_clk_match_table[] __initconst = {
 	{ }
 };
 
+/**
+ * ti_dt_clk_name - init clock name from first output name or node name
+ * @np: device node
+ *
+ * Use the first clock-output-name for the clock name if found. Fall back
+ * to legacy naming based on node name.
+ */
+const char *ti_dt_clk_name(struct device_node *np)
+{
+	const char *name;
+
+	if (!of_property_read_string_index(np, "clock-output-names", 0,
+					   &name))
+		return name;
+
+	return np->name;
+}
+
 /**
  * ti_clk_add_aliases - setup clock aliases
  *
@@ -463,7 +481,7 @@ void __init ti_clk_add_aliases(void)
 		clkspec.np = np;
 		clk = of_clk_get_from_provider(&clkspec);
 
-		ti_clk_add_alias(NULL, clk, np->name);
+		ti_clk_add_alias(NULL, clk, ti_dt_clk_name(np));
 	}
 }
 
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index f1dd62de2bfc..938f34e290ed 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -214,6 +214,7 @@ struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw,
 			    const char *con);
 struct clk *ti_clk_register_omap_hw(struct device *dev, struct clk_hw *hw,
 				    const char *con);
+const char *ti_dt_clk_name(struct device_node *np);
 int ti_clk_add_alias(struct device *dev, struct clk *clk, const char *con);
 void ti_clk_add_aliases(void);
 
-- 
cgit v1.2.3


From 9e56a7d4263ca1c51d867e811cf2dd7e61b6469e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:48 +0200
Subject: clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name()

Let's update the TI pll and clockdomain clocks to use ti_dt_clk_name()
instead of devicetree node name if available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-8-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/apll.c        | 13 +++++++++----
 drivers/clk/ti/clockdomain.c |  2 +-
 drivers/clk/ti/dpll.c        |  8 +++++---
 drivers/clk/ti/fapll.c       | 11 +++++++----
 4 files changed, 22 insertions(+), 12 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c
index ac5bc8857a51..e4db6b9a55c6 100644
--- a/drivers/clk/ti/apll.c
+++ b/drivers/clk/ti/apll.c
@@ -139,6 +139,7 @@ static void __init omap_clk_register_apll(void *user,
 	struct clk_hw *hw = user;
 	struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
 	struct dpll_data *ad = clk_hw->dpll_data;
+	const char *name;
 	struct clk *clk;
 	const struct clk_init_data *init = clk_hw->hw.init;
 
@@ -166,7 +167,8 @@ static void __init omap_clk_register_apll(void *user,
 
 	ad->clk_bypass = __clk_get_hw(clk);
 
-	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, node->name);
+	name = ti_dt_clk_name(node);
+	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name);
 	if (!IS_ERR(clk)) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 		kfree(init->parent_names);
@@ -198,7 +200,7 @@ static void __init of_dra7_apll_setup(struct device_node *node)
 	clk_hw->dpll_data = ad;
 	clk_hw->hw.init = init;
 
-	init->name = node->name;
+	init->name = ti_dt_clk_name(node);
 	init->ops = &apll_ck_ops;
 
 	init->num_parents = of_clk_get_parent_count(node);
@@ -347,6 +349,7 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	struct dpll_data *ad = NULL;
 	struct clk_hw_omap *clk_hw = NULL;
 	struct clk_init_data *init = NULL;
+	const char *name;
 	struct clk *clk;
 	const char *parent_name;
 	u32 val;
@@ -362,7 +365,8 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	clk_hw->dpll_data = ad;
 	clk_hw->hw.init = init;
 	init->ops = &omap2_apll_ops;
-	init->name = node->name;
+	name = ti_dt_clk_name(node);
+	init->name = name;
 	clk_hw->ops = &omap2_apll_hwops;
 
 	init->num_parents = of_clk_get_parent_count(node);
@@ -403,7 +407,8 @@ static void __init of_omap2_apll_setup(struct device_node *node)
 	if (ret)
 		goto cleanup;
 
-	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, node->name);
+	name = ti_dt_clk_name(node);
+	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name);
 	if (!IS_ERR(clk)) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
 		kfree(init);
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 74831b2752b3..24179c907774 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -131,7 +131,7 @@ static void __init of_ti_clockdomain_setup(struct device_node *node)
 {
 	struct clk *clk;
 	struct clk_hw *clk_hw;
-	const char *clkdm_name = node->name;
+	const char *clkdm_name = ti_dt_clk_name(node);
 	int i;
 	unsigned int num_clks;
 
diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c
index e9f9aee936ae..7c6dc8449b22 100644
--- a/drivers/clk/ti/dpll.c
+++ b/drivers/clk/ti/dpll.c
@@ -164,6 +164,7 @@ static void __init _register_dpll(void *user,
 	struct clk_hw *hw = user;
 	struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
 	struct dpll_data *dd = clk_hw->dpll_data;
+	const char *name;
 	struct clk *clk;
 	const struct clk_init_data *init = hw->init;
 
@@ -193,7 +194,8 @@ static void __init _register_dpll(void *user,
 	dd->clk_bypass = __clk_get_hw(clk);
 
 	/* register the clock */
-	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, node->name);
+	name = ti_dt_clk_name(node);
+	clk = ti_clk_register_omap_hw(NULL, &clk_hw->hw, name);
 
 	if (!IS_ERR(clk)) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
@@ -227,7 +229,7 @@ static void _register_dpll_x2(struct device_node *node,
 	struct clk *clk;
 	struct clk_init_data init = { NULL };
 	struct clk_hw_omap *clk_hw;
-	const char *name = node->name;
+	const char *name = ti_dt_clk_name(node);
 	const char *parent_name;
 
 	parent_name = of_clk_get_parent_name(node, 0);
@@ -304,7 +306,7 @@ static void __init of_ti_dpll_setup(struct device_node *node,
 	clk_hw->ops = &clkhwops_omap3_dpll;
 	clk_hw->hw.init = init;
 
-	init->name = node->name;
+	init->name = ti_dt_clk_name(node);
 	init->ops = ops;
 
 	init->num_parents = of_clk_get_parent_count(node);
diff --git a/drivers/clk/ti/fapll.c b/drivers/clk/ti/fapll.c
index 8024c6d2b9e9..749c6b73abff 100644
--- a/drivers/clk/ti/fapll.c
+++ b/drivers/clk/ti/fapll.c
@@ -19,6 +19,8 @@
 #include <linux/of_address.h>
 #include <linux/clk/ti.h>
 
+#include "clock.h"
+
 /* FAPLL Control Register PLL_CTRL */
 #define FAPLL_MAIN_MULT_N_SHIFT	16
 #define FAPLL_MAIN_DIV_P_SHIFT	8
@@ -542,6 +544,7 @@ static void __init ti_fapll_setup(struct device_node *node)
 	struct clk_init_data *init = NULL;
 	const char *parent_name[2];
 	struct clk *pll_clk;
+	const char *name;
 	int i;
 
 	fd = kzalloc(sizeof(*fd), GFP_KERNEL);
@@ -559,7 +562,8 @@ static void __init ti_fapll_setup(struct device_node *node)
 		goto free;
 
 	init->ops = &ti_fapll_ops;
-	init->name = node->name;
+	name = ti_dt_clk_name(node);
+	init->name = name;
 
 	init->num_parents = of_clk_get_parent_count(node);
 	if (init->num_parents != 2) {
@@ -591,7 +595,7 @@ static void __init ti_fapll_setup(struct device_node *node)
 	if (fapll_is_ddr_pll(fd->base))
 		fd->bypass_bit_inverted = true;
 
-	fd->name = node->name;
+	fd->name = name;
 	fd->hw.init = init;
 
 	/* Register the parent PLL */
@@ -638,8 +642,7 @@ static void __init ti_fapll_setup(struct device_node *node)
 				freq = NULL;
 		}
 		synth_clk = ti_fapll_synth_setup(fd, freq, div, output_instance,
-						 output_name, node->name,
-						 pll_clk);
+						 output_name, name, pll_clk);
 		if (IS_ERR(synth_clk))
 			continue;
 
-- 
cgit v1.2.3


From ed06099c5d0b329082cc19c58eace0b20bf7fe70 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Fri, 4 Feb 2022 09:14:49 +0200
Subject: clk: ti: Update component clocks to use ti_dt_clk_name()

Let's update all the TI component clocks to use ti_dt_clk_name() instead
of devicetree node name if available.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220204071449.16762-9-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/autoidle.c     | 2 +-
 drivers/clk/ti/clk-dra7-atl.c | 6 ++++--
 drivers/clk/ti/composite.c    | 6 ++++--
 drivers/clk/ti/divider.c      | 6 ++++--
 drivers/clk/ti/fixed-factor.c | 2 +-
 drivers/clk/ti/gate.c         | 4 +++-
 drivers/clk/ti/interface.c    | 4 +++-
 drivers/clk/ti/mux.c          | 4 +++-
 8 files changed, 23 insertions(+), 11 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index f6f8a409f148..d6e5f1511ace 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -205,7 +205,7 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 		return -ENOMEM;
 
 	clk->shift = shift;
-	clk->name = node->name;
+	clk->name = ti_dt_clk_name(node);
 	ret = ti_clk_get_reg_addr(node, 0, &clk->reg);
 	if (ret) {
 		kfree(clk);
diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c
index 8d4c08b034bd..aa0950c4f498 100644
--- a/drivers/clk/ti/clk-dra7-atl.c
+++ b/drivers/clk/ti/clk-dra7-atl.c
@@ -173,6 +173,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 	struct dra7_atl_desc *clk_hw = NULL;
 	struct clk_init_data init = { NULL };
 	const char **parent_names = NULL;
+	const char *name;
 	struct clk *clk;
 
 	clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
@@ -183,7 +184,8 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 
 	clk_hw->hw.init = &init;
 	clk_hw->divider = 1;
-	init.name = node->name;
+	name = ti_dt_clk_name(node);
+	init.name = name;
 	init.ops = &atl_clk_ops;
 	init.flags = CLK_IGNORE_UNUSED;
 	init.num_parents = of_clk_get_parent_count(node);
@@ -203,7 +205,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node)
 
 	init.parent_names = parent_names;
 
-	clk = ti_clk_register(NULL, &clk_hw->hw, node->name);
+	clk = ti_clk_register(NULL, &clk_hw->hw, name);
 
 	if (!IS_ERR(clk)) {
 		of_clk_add_provider(node, of_clk_src_simple_get, clk);
diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c
index eaa43575cfa5..8d60319be368 100644
--- a/drivers/clk/ti/composite.c
+++ b/drivers/clk/ti/composite.c
@@ -125,6 +125,7 @@ static void __init _register_composite(void *user,
 	struct component_clk *comp;
 	int num_parents = 0;
 	const char **parent_names = NULL;
+	const char *name;
 	int i;
 	int ret;
 
@@ -172,7 +173,8 @@ static void __init _register_composite(void *user,
 		goto cleanup;
 	}
 
-	clk = clk_register_composite(NULL, node->name,
+	name = ti_dt_clk_name(node);
+	clk = clk_register_composite(NULL, name,
 				     parent_names, num_parents,
 				     _get_hw(cclk, CLK_COMPONENT_TYPE_MUX),
 				     &ti_clk_mux_ops,
@@ -182,7 +184,7 @@ static void __init _register_composite(void *user,
 				     &ti_composite_gate_ops, 0);
 
 	if (!IS_ERR(clk)) {
-		ret = ti_clk_add_alias(NULL, clk, node->name);
+		ret = ti_clk_add_alias(NULL, clk, name);
 		if (ret) {
 			clk_unregister(clk);
 			goto cleanup;
diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c
index 28080df92f72..9fbea0997b43 100644
--- a/drivers/clk/ti/divider.c
+++ b/drivers/clk/ti/divider.c
@@ -320,10 +320,12 @@ static struct clk *_register_divider(struct device_node *node,
 	struct clk *clk;
 	struct clk_init_data init;
 	const char *parent_name;
+	const char *name;
 
 	parent_name = of_clk_get_parent_name(node, 0);
 
-	init.name = node->name;
+	name = ti_dt_clk_name(node);
+	init.name = name;
 	init.ops = &ti_clk_divider_ops;
 	init.flags = flags;
 	init.parent_names = (parent_name ? &parent_name : NULL);
@@ -332,7 +334,7 @@ static struct clk *_register_divider(struct device_node *node,
 	div->hw.init = &init;
 
 	/* register the clock */
-	clk = ti_clk_register(NULL, &div->hw, node->name);
+	clk = ti_clk_register(NULL, &div->hw, name);
 
 	if (IS_ERR(clk))
 		kfree(div);
diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c
index 7cbe896db071..8cb00d0af966 100644
--- a/drivers/clk/ti/fixed-factor.c
+++ b/drivers/clk/ti/fixed-factor.c
@@ -36,7 +36,7 @@
 static void __init of_ti_fixed_factor_clk_setup(struct device_node *node)
 {
 	struct clk *clk;
-	const char *clk_name = node->name;
+	const char *clk_name = ti_dt_clk_name(node);
 	const char *parent_name;
 	u32 div, mult;
 	u32 flags = 0;
diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c
index b1d0fdb40a75..0033de9beb4c 100644
--- a/drivers/clk/ti/gate.c
+++ b/drivers/clk/ti/gate.c
@@ -138,6 +138,7 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 	struct clk *clk;
 	const char *parent_name;
 	struct clk_omap_reg reg;
+	const char *name;
 	u8 enable_bit = 0;
 	u32 val;
 	u32 flags = 0;
@@ -164,7 +165,8 @@ static void __init _of_ti_gate_clk_setup(struct device_node *node,
 	if (of_property_read_bool(node, "ti,set-bit-to-disable"))
 		clk_gate_flags |= INVERT_ENABLE;
 
-	clk = _register_gate(NULL, node->name, parent_name, flags, &reg,
+	name = ti_dt_clk_name(node);
+	clk = _register_gate(NULL, name, parent_name, flags, &reg,
 			     enable_bit, clk_gate_flags, ops, hw_ops);
 
 	if (!IS_ERR(clk))
diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c
index 83e34429d3b1..dd2b455183a9 100644
--- a/drivers/clk/ti/interface.c
+++ b/drivers/clk/ti/interface.c
@@ -72,6 +72,7 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 	const char *parent_name;
 	struct clk_omap_reg reg;
 	u8 enable_bit = 0;
+	const char *name;
 	u32 val;
 
 	if (ti_clk_get_reg_addr(node, 0, &reg))
@@ -86,7 +87,8 @@ static void __init _of_ti_interface_clk_setup(struct device_node *node,
 		return;
 	}
 
-	clk = _register_interface(NULL, node->name, parent_name, &reg,
+	name = ti_dt_clk_name(node);
+	clk = _register_interface(NULL, name, parent_name, &reg,
 				  enable_bit, ops);
 
 	if (!IS_ERR(clk))
diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c
index 0069e7cf3ebc..15de513d2d81 100644
--- a/drivers/clk/ti/mux.c
+++ b/drivers/clk/ti/mux.c
@@ -176,6 +176,7 @@ static void of_mux_clk_setup(struct device_node *node)
 	struct clk_omap_reg reg;
 	unsigned int num_parents;
 	const char **parent_names;
+	const char *name;
 	u8 clk_mux_flags = 0;
 	u32 mask = 0;
 	u32 shift = 0;
@@ -213,7 +214,8 @@ static void of_mux_clk_setup(struct device_node *node)
 
 	mask = (1 << fls(mask)) - 1;
 
-	clk = _register_mux(NULL, node->name, parent_names, num_parents,
+	name = ti_dt_clk_name(node);
+	clk = _register_mux(NULL, name, parent_names, num_parents,
 			    flags, &reg, shift, mask, latch, clk_mux_flags,
 			    NULL);
 
-- 
cgit v1.2.3


From d8a441e53e2434b1401e52dfd66b05263e442edc Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Fri, 18 Feb 2022 01:09:17 +0100
Subject: clk: actions: Terminate clk_div_table with sentinel element
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

In owl-s900.s, the { 0, 8 } element was probably meant to be just that,
so this patch changes { 0, 8 } to { 0, 0 }.

Fixes: d47317ca4ade1 ("clk: actions: Add S700 SoC clock support")
Fixes: d85d20053e195 ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20220218000922.134857-2-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/actions/owl-s700.c | 1 +
 drivers/clk/actions/owl-s900.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
index a2f34d13fb54..6ea7da1d6d75 100644
--- a/drivers/clk/actions/owl-s700.c
+++ b/drivers/clk/actions/owl-s700.c
@@ -162,6 +162,7 @@ static struct clk_div_table hdmia_div_table[] = {
 
 static struct clk_div_table rmii_div_table[] = {
 	{0, 4},   {1, 10},
+	{0, 0}
 };
 
 /* divider clocks */
diff --git a/drivers/clk/actions/owl-s900.c b/drivers/clk/actions/owl-s900.c
index 790890978424..5144ada2c7e1 100644
--- a/drivers/clk/actions/owl-s900.c
+++ b/drivers/clk/actions/owl-s900.c
@@ -140,7 +140,7 @@ static struct clk_div_table rmii_ref_div_table[] = {
 
 static struct clk_div_table usb3_mac_div_table[] = {
 	{ 1, 2 }, { 2, 3 }, { 3, 4 },
-	{ 0, 8 },
+	{ 0, 0 }
 };
 
 static struct clk_div_table i2s_div_table[] = {
-- 
cgit v1.2.3


From 3eb00f89162e80083dfcaa842468b510462cfeaa Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Fri, 18 Feb 2022 01:09:18 +0100
Subject: clk: loongson1: Terminate clk_div_table with sentinel element
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lore.kernel.org/r/20220218000922.134857-3-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/loongson1/clk-loongson1c.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/loongson1/clk-loongson1c.c b/drivers/clk/loongson1/clk-loongson1c.c
index 703f87622cf5..1ebf740380ef 100644
--- a/drivers/clk/loongson1/clk-loongson1c.c
+++ b/drivers/clk/loongson1/clk-loongson1c.c
@@ -37,6 +37,7 @@ static const struct clk_div_table ahb_div_table[] = {
 	[1] = { .val = 1, .div = 4 },
 	[2] = { .val = 2, .div = 3 },
 	[3] = { .val = 3, .div = 3 },
+	[4] = { /* sentinel */ }
 };
 
 void __init ls1x_clk_init(void)
-- 
cgit v1.2.3


From 113b261bdf2b4fd34e7769a147a7acd0a4d9137f Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Fri, 18 Feb 2022 01:09:19 +0100
Subject: clk: hisilicon: Terminate clk_div_table with sentinel element
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: 6c81966107dc0 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-4-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/hisilicon/clk-hi3559a.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/hisilicon/clk-hi3559a.c b/drivers/clk/hisilicon/clk-hi3559a.c
index 56012a3d0219..9ea1a80acbe8 100644
--- a/drivers/clk/hisilicon/clk-hi3559a.c
+++ b/drivers/clk/hisilicon/clk-hi3559a.c
@@ -611,8 +611,8 @@ static struct hisi_mux_clock hi3559av100_shub_mux_clks[] = {
 
 
 /* shub div clk */
-static struct clk_div_table shub_spi_clk_table[] = {{0, 8}, {1, 4}, {2, 2}};
-static struct clk_div_table shub_uart_div_clk_table[] = {{1, 8}, {2, 4}};
+static struct clk_div_table shub_spi_clk_table[] = {{0, 8}, {1, 4}, {2, 2}, {/*sentinel*/}};
+static struct clk_div_table shub_uart_div_clk_table[] = {{1, 8}, {2, 4}, {/*sentinel*/}};
 
 static struct hisi_divider_clock hi3559av100_shub_div_clks[] = {
 	{ HI3559AV100_SHUB_SPI_SOURCE_CLK, "clk_spi_clk", "shub_clk", 0, 0x20, 24, 2,
-- 
cgit v1.2.3


From 8bed4ed5aa3431085d9d27afc35d684856460eda Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Fri, 18 Feb 2022 01:09:20 +0100
Subject: clk: clps711x: Terminate clk_div_table with sentinel element
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: 631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-5-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk-clps711x.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk-clps711x.c b/drivers/clk/clk-clps711x.c
index a2c6486ef170..f8417ee2961a 100644
--- a/drivers/clk/clk-clps711x.c
+++ b/drivers/clk/clk-clps711x.c
@@ -28,11 +28,13 @@ static const struct clk_div_table spi_div_table[] = {
 	{ .val = 1, .div = 8, },
 	{ .val = 2, .div = 2, },
 	{ .val = 3, .div = 1, },
+	{ /* sentinel */ }
 };
 
 static const struct clk_div_table timer_div_table[] = {
 	{ .val = 0, .div = 256, },
 	{ .val = 1, .div = 1, },
+	{ /* sentinel */ }
 };
 
 struct clps711x_clk {
-- 
cgit v1.2.3


From 1fdfd517ce79740016f8ea4afc3fdc8e13f2653c Mon Sep 17 00:00:00 2001
From: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Date: Fri, 18 Feb 2022 01:09:21 +0100
Subject: clk: actions: Make sentinel elements more obvious
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The sentinel elements of various tables in drivers/clk/actions can be a
bit hard to recognize. Make them easier to see by changing the style
from { 0, 0 } to { /* sentinel */ }.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-6-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/actions/owl-s500.c | 16 ++++++++--------
 drivers/clk/actions/owl-s700.c | 18 ++++++++++--------
 drivers/clk/actions/owl-s900.c | 26 +++++++++++++-------------
 3 files changed, 31 insertions(+), 29 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
index 57d06e183dff..c69a7e2f0645 100644
--- a/drivers/clk/actions/owl-s500.c
+++ b/drivers/clk/actions/owl-s500.c
@@ -95,7 +95,7 @@
 
 static const struct clk_pll_table clk_audio_pll_table[] = {
 	{ 0, 45158400 }, { 1, 49152000 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 /* pll clocks */
@@ -138,46 +138,46 @@ static struct clk_factor_table sd_factor_table[] = {
 	{ 272, 1, 17 * 128 }, { 273, 1, 18 * 128 }, { 274, 1, 19 * 128 }, { 275, 1, 20 * 128 },
 	{ 276, 1, 21 * 128 }, { 277, 1, 22 * 128 }, { 278, 1, 23 * 128 }, { 279, 1, 24 * 128 },
 	{ 280, 1, 25 * 128 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table de_factor_table[] = {
 	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 },
 	{ 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 },
 	{ 8, 1, 12 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table hde_factor_table[] = {
 	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 },
 	{ 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table rmii_ref_div_table[] = {
 	{ 0, 4 }, { 1, 10 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table std12rate_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
 	{ 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table i2s_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 6 }, { 5, 8 }, { 6, 12 }, { 7, 16 },
 	{ 8, 24 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table nand_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 4 }, { 3, 6 },
 	{ 4, 8 }, { 5, 10 }, { 6, 12 }, { 7, 14 },
 	{ 8, 16 }, { 9, 18 }, { 10, 20 }, { 11, 22 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 /* mux clock */
diff --git a/drivers/clk/actions/owl-s700.c b/drivers/clk/actions/owl-s700.c
index 6ea7da1d6d75..3e48105602aa 100644
--- a/drivers/clk/actions/owl-s700.c
+++ b/drivers/clk/actions/owl-s700.c
@@ -73,7 +73,7 @@
 
 static struct clk_pll_table clk_audio_pll_table[] = {
 	{0, 45158400}, {1, 49152000},
-	{0, 0},
+	{ /* sentinel */ }
 };
 
 static struct clk_pll_table clk_cvbs_pll_table[] = {
@@ -82,7 +82,8 @@ static struct clk_pll_table clk_cvbs_pll_table[] = {
 	{33, 35 * 12000000}, {34, 36 * 12000000}, {35, 37 * 12000000},
 	{36, 38 * 12000000}, {37, 39 * 12000000}, {38, 40 * 12000000},
 	{39, 41 * 12000000}, {40, 42 * 12000000}, {41, 43 * 12000000},
-	{42, 44 * 12000000}, {43, 45 * 12000000}, {0, 0},
+	{42, 44 * 12000000}, {43, 45 * 12000000},
+	{ /* sentinel */ }
 };
 
 /* pll clocks */
@@ -137,7 +138,7 @@ static struct clk_factor_table sd_factor_table[] = {
 	{276, 1, 21 * 128}, {277, 1, 22 * 128}, {278, 1, 23 * 128}, {279, 1, 24 * 128},
 	{280, 1, 25 * 128}, {281, 1, 26 * 128},
 
-	{0, 0},
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table lcd_factor_table[] = {
@@ -150,19 +151,19 @@ static struct clk_factor_table lcd_factor_table[] = {
 	{256, 1, 1 * 7}, {257, 1, 2 * 7}, {258, 1, 3 * 7}, {259, 1, 4 * 7},
 	{260, 1, 5 * 7}, {261, 1, 6 * 7}, {262, 1, 7 * 7}, {263, 1, 8 * 7},
 	{264, 1, 9 * 7}, {265, 1, 10 * 7}, {266, 1, 11 * 7}, {267, 1, 12 * 7},
-	{0, 0},
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table hdmia_div_table[] = {
 	{0, 1},   {1, 2},   {2, 3},   {3, 4},
 	{4, 6},   {5, 8},   {6, 12},  {7, 16},
 	{8, 24},
-	{0, 0},
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table rmii_div_table[] = {
 	{0, 4},   {1, 10},
-	{0, 0}
+	{ /* sentinel */ }
 };
 
 /* divider clocks */
@@ -179,13 +180,14 @@ static OWL_DIVIDER(clk_rmii_ref, "rmii_ref", "ethernet_pll", CMU_ETHERNETPLL, 2,
 static struct clk_factor_table de_factor_table[] = {
 	{0, 1, 1}, {1, 2, 3}, {2, 1, 2}, {3, 2, 5},
 	{4, 1, 3}, {5, 1, 4}, {6, 1, 6}, {7, 1, 8},
-	{8, 1, 12}, {0, 0, 0},
+	{8, 1, 12},
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table hde_factor_table[] = {
 	{0, 1, 1}, {1, 2, 3}, {2, 1, 2}, {3, 2, 5},
 	{4, 1, 3}, {5, 1, 4}, {6, 1, 6}, {7, 1, 8},
-	{0, 0, 0},
+	{ /* sentinel */ }
 };
 
 /* gate clocks */
diff --git a/drivers/clk/actions/owl-s900.c b/drivers/clk/actions/owl-s900.c
index 5144ada2c7e1..7dc6e07fb60e 100644
--- a/drivers/clk/actions/owl-s900.c
+++ b/drivers/clk/actions/owl-s900.c
@@ -73,12 +73,12 @@
 
 static struct clk_pll_table clk_audio_pll_table[] = {
 	{ 0, 45158400 }, { 1, 49152000 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_pll_table clk_edp_pll_table[] = {
 	{ 0, 810000000 }, { 1, 135000000 }, { 2, 270000000 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 /* pll clocks */
@@ -120,41 +120,41 @@ static struct clk_div_table nand_div_table[] = {
 	{ 4, 8 }, { 5, 10 }, { 6, 12 }, { 7, 14 },
 	{ 8, 16 }, { 9, 18 }, { 10, 20 }, { 11, 22 },
 	{ 12, 24 }, { 13, 26 }, { 14, 28 }, { 15, 30 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table apb_div_table[] = {
 	{ 1, 2 }, { 2, 3 }, { 3, 4 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table eth_mac_div_table[] = {
 	{ 0, 2 }, { 1, 4 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table rmii_ref_div_table[] = {
 	{ 0, 4 },	  { 1, 10 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table usb3_mac_div_table[] = {
 	{ 1, 2 }, { 2, 3 }, { 3, 4 },
-	{ 0, 0 }
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table i2s_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 6 }, { 5, 8 }, { 6, 12 }, { 7, 16 },
 	{ 8, 24 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_div_table hdmia_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
 	{ 4, 6 }, { 5, 8 }, { 6, 12 }, { 7, 16 },
 	{ 8, 24 },
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 /* divider clocks */
@@ -185,24 +185,24 @@ static struct clk_factor_table sd_factor_table[] = {
 	{ 280, 1, 25 * 128 }, { 281, 1, 26 * 128 }, { 282, 1, 27 * 128 }, { 283, 1, 28 * 128 },
 	{ 284, 1, 29 * 128 }, { 285, 1, 30 * 128 }, { 286, 1, 31 * 128 }, { 287, 1, 32 * 128 },
 
-	{ 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table dmm_factor_table[] = {
 	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 1, 3 },
 	{ 4, 1, 4 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table noc_factor_table[] = {
 	{ 0, 1, 1 },   { 1, 2, 3 }, { 2, 1, 2 }, { 3, 1, 3 }, { 4, 1, 4 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 static struct clk_factor_table bisp_factor_table[] = {
 	{ 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 },
 	{ 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 },
-	{ 0, 0, 0 },
+	{ /* sentinel */ }
 };
 
 /* factor clocks */
-- 
cgit v1.2.3


From 6f3cf24864ac113b053e485d7a7b000ee3786d1d Mon Sep 17 00:00:00 2001
From: Tom Rix <trix@redhat.com>
Date: Thu, 17 Feb 2022 09:34:53 -0800
Subject: clk: socfpga: cleanup spdx tags

Replace tabs with spaces in SPDX tag

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220217173453.3262672-1-trix@redhat.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/socfpga/clk-periph-s10.c | 2 +-
 drivers/clk/socfpga/clk-pll-s10.c    | 2 +-
 drivers/clk/socfpga/clk-s10.c        | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/socfpga/clk-periph-s10.c b/drivers/clk/socfpga/clk-periph-s10.c
index cbabde2b476b..f5c1ca42b668 100644
--- a/drivers/clk/socfpga/clk-periph-s10.c
+++ b/drivers/clk/socfpga/clk-periph-s10.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier:	GPL-2.0
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017, Intel Corporation
  */
diff --git a/drivers/clk/socfpga/clk-pll-s10.c b/drivers/clk/socfpga/clk-pll-s10.c
index e444e4a0ee53..1d82737befd3 100644
--- a/drivers/clk/socfpga/clk-pll-s10.c
+++ b/drivers/clk/socfpga/clk-pll-s10.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier:	GPL-2.0
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017, Intel Corporation
  */
diff --git a/drivers/clk/socfpga/clk-s10.c b/drivers/clk/socfpga/clk-s10.c
index 4e508a844b3d..9b2e0275fbf7 100644
--- a/drivers/clk/socfpga/clk-s10.c
+++ b/drivers/clk/socfpga/clk-s10.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier:	GPL-2.0
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017, Intel Corporation
  */
-- 
cgit v1.2.3


From 7c55e8efd290438e9bd95f6c3e14d3fa4f71b323 Mon Sep 17 00:00:00 2001
From: Tom Rix <trix@redhat.com>
Date: Tue, 22 Feb 2022 11:51:53 -0800
Subject: clk: cleanup comments

For spdx
Space instead of tab before spdx tag

Removed repeated works
the, to, two

Replacements
much much to a much
'to to' to 'to do'
aready to already
Comunications to Communications
freqency to frequency

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220222195153.3817625-1-trix@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/at91/sckc.c              | 2 +-
 drivers/clk/axis/clk-artpec6.c       | 2 +-
 drivers/clk/bcm/clk-iproc.h          | 2 +-
 drivers/clk/bcm/clk-kona-setup.c     | 2 +-
 drivers/clk/clk-fractional-divider.c | 2 +-
 drivers/clk/clk-si5341.c             | 2 +-
 drivers/clk/meson/meson8b.c          | 2 +-
 drivers/clk/mmp/pwr-island.c         | 2 +-
 drivers/clk/socfpga/clk-gate-s10.c   | 2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
index 2d65770d8665..fdc9b669f8a7 100644
--- a/drivers/clk/at91/sckc.c
+++ b/drivers/clk/at91/sckc.c
@@ -535,7 +535,7 @@ static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw)
 
 	/*
 	 * Assume that if it has already been selected (for example by the
-	 * bootloader), enough time has aready passed.
+	 * bootloader), enough time has already passed.
 	 */
 	if ((readl(osc->sckcr) & osc->bits->cr_oscsel)) {
 		osc->prepared = true;
diff --git a/drivers/clk/axis/clk-artpec6.c b/drivers/clk/axis/clk-artpec6.c
index f95959ff85ac..a3f349d4624d 100644
--- a/drivers/clk/axis/clk-artpec6.c
+++ b/drivers/clk/axis/clk-artpec6.c
@@ -2,7 +2,7 @@
 /*
  * ARTPEC-6 clock initialization
  *
- * Copyright 2015-2016 Axis Comunications AB.
+ * Copyright 2015-2016 Axis Communications AB.
  */
 
 #include <linux/clk-provider.h>
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
index a48ddd3e0b28..d7e5b94bed45 100644
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -89,7 +89,7 @@
  * Parameters for VCO frequency configuration
  *
  * VCO frequency =
- * ((ndiv_int + ndiv_frac / 2^20) * (ref freqeuncy  / pdiv)
+ * ((ndiv_int + ndiv_frac / 2^20) * (ref frequency  / pdiv)
  */
 struct iproc_pll_vco_param {
 	unsigned long rate;
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
index e65eeef9cbaf..5dd65164c8b1 100644
--- a/drivers/clk/bcm/clk-kona-setup.c
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -510,7 +510,7 @@ static bool kona_clk_valid(struct kona_clk *bcm_clk)
  * placeholders for non-supported clocks.  Keep track of the
  * position of each clock name in the original array.
  *
- * Allocates an array of pointers to to hold the names of all
+ * Allocates an array of pointers to hold the names of all
  * non-null entries in the original array, and returns a pointer to
  * that array in *names.  This will be used for registering the
  * clock with the common clock code.  On successful return,
diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c
index 4274540327ce..8efa5142ff8c 100644
--- a/drivers/clk/clk-fractional-divider.c
+++ b/drivers/clk/clk-fractional-divider.c
@@ -34,7 +34,7 @@
  * and assume that the IP, that needs m and n, has also its own
  * prescaler, which is capable to divide by 2^scale. In this way
  * we get the denominator to satisfy the desired range (2) and
- * at the same time much much better result of m and n than simple
+ * at the same time a much better result of m and n than simple
  * saturated values.
  */
 
diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index f7b41366666e..4baeb7378a4b 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -655,7 +655,7 @@ static unsigned long si5341_synth_clk_recalc_rate(struct clk_hw *hw,
 	f = synth->data->freq_vco;
 	f *= n_den >> 4;
 
-	/* Now we need to to 64-bit division: f/n_num */
+	/* Now we need to do 64-bit division: f/n_num */
 	/* And compensate for the 4 bits we dropped */
 	f = div64_u64(f, (n_num >> 4));
 
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index cd0f5bae24d4..8f3b7a94a667 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -2232,7 +2232,7 @@ static struct clk_regmap meson8b_vpu_1 = {
 };
 
 /*
- * The VPU clock has two two identical clock trees (vpu_0 and vpu_1)
+ * The VPU clock has two identical clock trees (vpu_0 and vpu_1)
  * muxed by a glitch-free switch on Meson8b and Meson8m2. The CCF can
  * actually manage this glitch-free mux because it does top-to-bottom
  * updates the each clock tree and switches to the "inactive" one when
diff --git a/drivers/clk/mmp/pwr-island.c b/drivers/clk/mmp/pwr-island.c
index ab57c0e995c1..edaa2433a472 100644
--- a/drivers/clk/mmp/pwr-island.c
+++ b/drivers/clk/mmp/pwr-island.c
@@ -76,7 +76,7 @@ static int mmp_pm_domain_power_off(struct generic_pm_domain *genpd)
 	if (pm_domain->lock)
 		spin_lock_irqsave(pm_domain->lock, flags);
 
-	/* Turn off and isolate the the power island. */
+	/* Turn off and isolate the power island. */
 	val = readl(pm_domain->reg);
 	val &= ~pm_domain->power_on;
 	val &= ~0x100;
diff --git a/drivers/clk/socfpga/clk-gate-s10.c b/drivers/clk/socfpga/clk-gate-s10.c
index 32567795765f..3930d922efb4 100644
--- a/drivers/clk/socfpga/clk-gate-s10.c
+++ b/drivers/clk/socfpga/clk-gate-s10.c
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier:	GPL-2.0
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2017, Intel Corporation
  */
-- 
cgit v1.2.3


From 6d6ef58c2470da85a99119f74d34216c8074b9f0 Mon Sep 17 00:00:00 2001
From: Miaoqian Lin <linmq006@gmail.com>
Date: Wed, 12 Jan 2022 10:45:01 +0000
Subject: clk: tegra: tegra124-emc: Fix missing put_device() call in
 emc_ensure_emc_driver

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/tegra/clk-tegra124-emc.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/tegra/clk-tegra124-emc.c b/drivers/clk/tegra/clk-tegra124-emc.c
index 74c1d894cca8..219c80653dbd 100644
--- a/drivers/clk/tegra/clk-tegra124-emc.c
+++ b/drivers/clk/tegra/clk-tegra124-emc.c
@@ -198,6 +198,7 @@ static struct tegra_emc *emc_ensure_emc_driver(struct tegra_clk_emc *tegra)
 
 	tegra->emc = platform_get_drvdata(pdev);
 	if (!tegra->emc) {
+		put_device(&pdev->dev);
 		pr_err("%s: cannot find EMC driver\n", __func__);
 		return NULL;
 	}
-- 
cgit v1.2.3


From 09e3b18ca5def4680b65d60159e595dbbcf7743f Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Tue, 22 Feb 2022 15:07:32 +0100
Subject: clk: bcm2835: Remove unused variable

Since commit 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the
dividers"), the rem variable is still set but no longer used. Remove it.

Fixes: 8ca011ef4af4 ("clk: bcm-2835: Remove rounding up the dividers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220222140732.253819-1-maxime@cerno.tech
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/bcm/clk-bcm2835.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 3667b4d731e7..3ad20e75fd23 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -939,10 +939,8 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
 	u32 unused_frac_mask =
 		GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
 	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
-	u64 rem;
 	u32 div, mindiv, maxdiv;
 
-	rem = do_div(temp, rate);
 	div = temp;
 	div &= ~unused_frac_mask;
 
-- 
cgit v1.2.3


From cde8e3ae3d374bf7826d87bcb6b28fb334dcaf82 Mon Sep 17 00:00:00 2001
From: "Minghao Chi (CGEL ZTE)" <chi.minghao@zte.com.cn>
Date: Thu, 3 Mar 2022 01:48:56 +0000
Subject: clk: Use of_device_get_match_data()

Use of_device_get_match_data() to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220303014856.2059307-1-chi.minghao@zte.com.cn
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/clk-oxnas.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/clk-oxnas.c b/drivers/clk/clk-oxnas.c
index 78d5ea669fea..cda5e258355b 100644
--- a/drivers/clk/clk-oxnas.c
+++ b/drivers/clk/clk-oxnas.c
@@ -209,15 +209,11 @@ static int oxnas_stdclk_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	const struct oxnas_stdclk_data *data;
-	const struct of_device_id *id;
 	struct regmap *regmap;
 	int ret;
 	int i;
 
-	id = of_match_device(oxnas_stdclk_dt_ids, &pdev->dev);
-	if (!id)
-		return -ENODEV;
-	data = id->data;
+	data = of_device_get_match_data(&pdev->dev);
 
 	regmap = syscon_node_to_regmap(of_get_parent(np));
 	if (IS_ERR(regmap)) {
-- 
cgit v1.2.3


From 7cd5c56054f8340218b65bd6e4cc04614a4ab89c Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Thu, 24 Feb 2022 16:29:17 +0100
Subject: clk: COMMON_CLK_LAN966X should depend on SOC_LAN966

The LAN966x Generic Clock Controller is only present on Microchip
LAN966x SoCs.  Hence add a dependency on SOC_LAN966, to prevent asking
the user about this driver when configuring a kernel without LAN966x SoC
support.

Fixes: 54104ee023333e3b ("clk: lan966x: Add lan966x SoC clock driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/eb102eae05e5667b9bd342a0c387f7f262d24bda.1645716471.git.geert+renesas@glider.be
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index ad4256d54361..042092d00413 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -231,6 +231,7 @@ config COMMON_CLK_GEMINI
 
 config COMMON_CLK_LAN966X
 	bool "Generic Clock Controller driver for LAN966X SoC"
+	depends on SOC_LAN966 || COMPILE_TEST
 	help
 	  This driver provides support for Generic Clock Controller(GCK) on
 	  LAN966X SoC. GCK generates and supplies clock to various peripherals
-- 
cgit v1.2.3


From 8850c3eae2c7a68ed901432a456ea70bbfef65a4 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 3 Feb 2022 10:56:16 +0200
Subject: clk: ti: Drop legacy compatibility clocks for am3

We no longer have users for the compatibility clocks and we can drop them.
These are old duplicate clocks for what we using.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220203085618.16043-2-tony@atomide.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/Makefile          |   3 +-
 drivers/clk/ti/clk-33xx-compat.c | 218 ---------------------------------------
 drivers/clk/ti/clk-33xx.c        |   5 +-
 drivers/clk/ti/clkctrl.c         |   8 +-
 include/dt-bindings/clock/am3.h  |  93 -----------------
 5 files changed, 4 insertions(+), 323 deletions(-)
 delete mode 100644 drivers/clk/ti/clk-33xx-compat.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 5ca1e39dd88a..b9f54c7b50fd 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -6,8 +6,7 @@ clk-common				= dpll.o composite.o divider.o gate.o \
 					  fixed-factor.o mux.o apll.o \
 					  clkt_dpll.o clkt_iclk.o clkt_dflt.o \
 					  clkctrl.o
-obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o dpll3xxx.o \
-					  clk-33xx-compat.o
+obj-$(CONFIG_SOC_AM33XX)		+= $(clk-common) clk-33xx.o dpll3xxx.o
 obj-$(CONFIG_SOC_TI81XX)		+= $(clk-common) fapll.o clk-814x.o clk-816x.o
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clk-common) interface.o clk-2xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clk-common) interface.o \
diff --git a/drivers/clk/ti/clk-33xx-compat.c b/drivers/clk/ti/clk-33xx-compat.c
deleted file mode 100644
index 3e07f127912a..000000000000
--- a/drivers/clk/ti/clk-33xx-compat.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * AM33XX Clock init
- *
- * Copyright (C) 2013 Texas Instruments, Inc
- *     Tero Kristo (t-kristo@ti.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/ti.h>
-#include <dt-bindings/clock/am3.h>
-
-#include "clock.h"
-
-static const char * const am3_gpio1_dbclk_parents[] __initconst = {
-	"l4_per_cm:clk:0138:0",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio2_bit_data[] __initconst = {
-	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio3_bit_data[] __initconst = {
-	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
-	{ 18, TI_CLK_GATE, am3_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_per_clkctrl_regs[] __initconst = {
-	{ AM3_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
-	{ AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk", "lcdc_clkdm" },
-	{ AM3_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck", "l3s_clkdm" },
-	{ AM3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck", "l3_clkdm" },
-	{ AM3_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
-	{ AM3_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck", "l3s_clkdm" },
-	{ AM3_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
-	{ AM3_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck", "l3s_clkdm" },
-	{ AM3_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM3_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
-	{ AM3_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
-	{ AM3_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
-	{ AM3_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
-	{ AM3_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
-	{ AM3_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck", "l3_clkdm" },
-	{ AM3_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_GPIO2_CLKCTRL, am3_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_GPIO3_CLKCTRL, am3_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_GPIO4_CLKCTRL, am3_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
-	{ AM3_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
-	{ AM3_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk", "pruss_ocp_clkdm" },
-	{ AM3_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
-	{ AM3_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
-	{ AM3_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
-	{ AM3_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk", "l3s_clkdm" },
-	{ AM3_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM3_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk", "l4hs_clkdm" },
-	{ AM3_OCPWP_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM3_CLKDIV32K_CLKCTRL, NULL, CLKF_SW_SUP, "clkdiv32k_ck", "clk_24mhz_clkdm" },
-	{ 0 },
-};
-
-static const char * const am3_gpio0_dbclk_parents[] __initconst = {
-	"gpio0_dbclk_mux_ck",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_gpio1_bit_data[] __initconst = {
-	{ 18, TI_CLK_GATE, am3_gpio0_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const char * const am3_dbg_sysclk_ck_parents[] __initconst = {
-	"sys_clkin_ck",
-	NULL,
-};
-
-static const char * const am3_trace_pmd_clk_mux_ck_parents[] __initconst = {
-	"l4_wkup_cm:clk:0010:19",
-	"l4_wkup_cm:clk:0010:30",
-	NULL,
-};
-
-static const char * const am3_trace_clk_div_ck_parents[] __initconst = {
-	"l4_wkup_cm:clk:0010:20",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data am3_trace_clk_div_ck_data __initconst = {
-	.max_div = 64,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const char * const am3_stm_clk_div_ck_parents[] __initconst = {
-	"l4_wkup_cm:clk:0010:22",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data am3_stm_clk_div_ck_data __initconst = {
-	.max_div = 64,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const char * const am3_dbg_clka_ck_parents[] __initconst = {
-	"dpll_core_m4_ck",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am3_debugss_bit_data[] __initconst = {
-	{ 19, TI_CLK_GATE, am3_dbg_sysclk_ck_parents, NULL },
-	{ 20, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
-	{ 22, TI_CLK_MUX, am3_trace_pmd_clk_mux_ck_parents, NULL },
-	{ 24, TI_CLK_DIVIDER, am3_trace_clk_div_ck_parents, &am3_trace_clk_div_ck_data },
-	{ 27, TI_CLK_DIVIDER, am3_stm_clk_div_ck_parents, &am3_stm_clk_div_ck_data },
-	{ 30, TI_CLK_GATE, am3_dbg_clka_ck_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_wkup_clkctrl_regs[] __initconst = {
-	{ AM3_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
-	{ AM3_GPIO1_CLKCTRL, am3_gpio1_bit_data, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
-	{ AM3_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_m4_div2_ck" },
-	{ AM3_DEBUGSS_CLKCTRL, am3_debugss_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0010:24", "l3_aon_clkdm" },
-	{ AM3_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "dpll_core_m4_div2_ck", "l4_wkup_aon_clkdm" },
-	{ AM3_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
-	{ AM3_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck" },
-	{ AM3_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck" },
-	{ AM3_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck" },
-	{ AM3_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck" },
-	{ AM3_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck" },
-	{ AM3_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_mpu_clkctrl_regs[] __initconst = {
-	{ AM3_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_rtc_clkctrl_regs[] __initconst = {
-	{ AM3_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_gfx_l3_clkctrl_regs[] __initconst = {
-	{ AM3_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am3_l4_cefuse_clkctrl_regs[] __initconst = {
-	{ AM3_CEFUSE_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck" },
-	{ 0 },
-};
-
-const struct omap_clkctrl_data am3_clkctrl_compat_data[] __initconst = {
-	{ 0x44e00014, am3_l4_per_clkctrl_regs },
-	{ 0x44e00404, am3_l4_wkup_clkctrl_regs },
-	{ 0x44e00604, am3_mpu_clkctrl_regs },
-	{ 0x44e00800, am3_l4_rtc_clkctrl_regs },
-	{ 0x44e00904, am3_gfx_l3_clkctrl_regs },
-	{ 0x44e00a20, am3_l4_cefuse_clkctrl_regs },
-	{ 0 },
-};
-
-struct ti_dt_clk am33xx_compat_clks[] = {
-	DT_CLK(NULL, "timer_32k_ck", "l4_per_cm:0138:0"),
-	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
-	DT_CLK(NULL, "clkdiv32k_ick", "l4_per_cm:0138:0"),
-	DT_CLK(NULL, "dbg_clka_ck", "l4_wkup_cm:0010:30"),
-	DT_CLK(NULL, "dbg_sysclk_ck", "l4_wkup_cm:0010:19"),
-	DT_CLK(NULL, "gpio0_dbclk", "l4_wkup_cm:0004:18"),
-	DT_CLK(NULL, "gpio1_dbclk", "l4_per_cm:0098:18"),
-	DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:009c:18"),
-	DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:00a0:18"),
-	DT_CLK(NULL, "stm_clk_div_ck", "l4_wkup_cm:0010:27"),
-	DT_CLK(NULL, "stm_pmd_clock_mux_ck", "l4_wkup_cm:0010:22"),
-	DT_CLK(NULL, "trace_clk_div_ck", "l4_wkup_cm:0010:24"),
-	DT_CLK(NULL, "trace_pmd_clk_mux_ck", "l4_wkup_cm:0010:20"),
-	{ .node_name = NULL },
-};
diff --git a/drivers/clk/ti/clk-33xx.c b/drivers/clk/ti/clk-33xx.c
index f2c22120aaa7..b4d142adede4 100644
--- a/drivers/clk/ti/clk-33xx.c
+++ b/drivers/clk/ti/clk-33xx.c
@@ -279,10 +279,7 @@ int __init am33xx_dt_clk_init(void)
 {
 	struct clk *clk1, *clk2;
 
-	if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-		ti_dt_clocks_register(am33xx_compat_clks);
-	else
-		ti_dt_clocks_register(am33xx_clks);
+	ti_dt_clocks_register(am33xx_clks);
 
 	omap2_clk_disable_autoidle_all();
 
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 535f35b21204..b2778252716f 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -560,12 +560,8 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 		soc_mask = CLKF_SOC_DRA76;
 #endif
 #ifdef CONFIG_SOC_AM33XX
-	if (of_machine_is_compatible("ti,am33xx")) {
-		if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-			data = am3_clkctrl_compat_data;
-		else
-			data = am3_clkctrl_data;
-	}
+	if (of_machine_is_compatible("ti,am33xx"))
+		data = am3_clkctrl_data;
 #endif
 #ifdef CONFIG_SOC_AM43XX
 	if (of_machine_is_compatible("ti,am4372")) {
diff --git a/include/dt-bindings/clock/am3.h b/include/dt-bindings/clock/am3.h
index 894951541276..dfbad5c87933 100644
--- a/include/dt-bindings/clock/am3.h
+++ b/include/dt-bindings/clock/am3.h
@@ -8,99 +8,6 @@
 #define AM3_CLKCTRL_OFFSET	0x0
 #define AM3_CLKCTRL_INDEX(offset)	((offset) - AM3_CLKCTRL_OFFSET)
 
-/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
-
-/* l4_per clocks */
-#define AM3_L4_PER_CLKCTRL_OFFSET	0x14
-#define AM3_L4_PER_CLKCTRL_INDEX(offset)	((offset) - AM3_L4_PER_CLKCTRL_OFFSET)
-#define AM3_CPGMAC0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x14)
-#define AM3_LCDC_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x18)
-#define AM3_USB_OTG_HS_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x1c)
-#define AM3_TPTC0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x24)
-#define AM3_EMIF_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x28)
-#define AM3_OCMCRAM_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x2c)
-#define AM3_GPMC_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x30)
-#define AM3_MCASP0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x34)
-#define AM3_UART6_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x38)
-#define AM3_MMC1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x3c)
-#define AM3_ELM_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x40)
-#define AM3_I2C3_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x44)
-#define AM3_I2C2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x48)
-#define AM3_SPI0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x4c)
-#define AM3_SPI1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x50)
-#define AM3_L4_LS_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x60)
-#define AM3_MCASP1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x68)
-#define AM3_UART2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x6c)
-#define AM3_UART3_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x70)
-#define AM3_UART4_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x74)
-#define AM3_UART5_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x78)
-#define AM3_TIMER7_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x7c)
-#define AM3_TIMER2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x80)
-#define AM3_TIMER3_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x84)
-#define AM3_TIMER4_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x88)
-#define AM3_RNG_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x90)
-#define AM3_AES_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x94)
-#define AM3_SHAM_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xa0)
-#define AM3_GPIO2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xac)
-#define AM3_GPIO3_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xb0)
-#define AM3_GPIO4_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xb4)
-#define AM3_TPCC_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xbc)
-#define AM3_D_CAN0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xc0)
-#define AM3_D_CAN1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xc4)
-#define AM3_EPWMSS1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xcc)
-#define AM3_EPWMSS0_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xd4)
-#define AM3_EPWMSS2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xd8)
-#define AM3_L3_INSTR_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xdc)
-#define AM3_L3_MAIN_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xe0)
-#define AM3_PRUSS_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xe8)
-#define AM3_TIMER5_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xec)
-#define AM3_TIMER6_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xf0)
-#define AM3_MMC2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xf4)
-#define AM3_MMC3_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xf8)
-#define AM3_TPTC1_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0xfc)
-#define AM3_TPTC2_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x100)
-#define AM3_SPINLOCK_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x10c)
-#define AM3_MAILBOX_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x110)
-#define AM3_L4_HS_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x120)
-#define AM3_OCPWP_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x130)
-#define AM3_CLKDIV32K_CLKCTRL	AM3_L4_PER_CLKCTRL_INDEX(0x14c)
-
-/* l4_wkup clocks */
-#define AM3_L4_WKUP_CLKCTRL_OFFSET	0x4
-#define AM3_L4_WKUP_CLKCTRL_INDEX(offset)	((offset) - AM3_L4_WKUP_CLKCTRL_OFFSET)
-#define AM3_CONTROL_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0x4)
-#define AM3_GPIO1_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0x8)
-#define AM3_L4_WKUP_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xc)
-#define AM3_DEBUGSS_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0x14)
-#define AM3_WKUP_M3_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xb0)
-#define AM3_UART1_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xb4)
-#define AM3_I2C1_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xb8)
-#define AM3_ADC_TSC_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xbc)
-#define AM3_SMARTREFLEX0_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xc0)
-#define AM3_TIMER1_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xc4)
-#define AM3_SMARTREFLEX1_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xc8)
-#define AM3_WD_TIMER2_CLKCTRL	AM3_L4_WKUP_CLKCTRL_INDEX(0xd4)
-
-/* mpu clocks */
-#define AM3_MPU_CLKCTRL_OFFSET	0x4
-#define AM3_MPU_CLKCTRL_INDEX(offset)	((offset) - AM3_MPU_CLKCTRL_OFFSET)
-#define AM3_MPU_CLKCTRL	AM3_MPU_CLKCTRL_INDEX(0x4)
-
-/* l4_rtc clocks */
-#define AM3_RTC_CLKCTRL	AM3_CLKCTRL_INDEX(0x0)
-
-/* gfx_l3 clocks */
-#define AM3_GFX_L3_CLKCTRL_OFFSET	0x4
-#define AM3_GFX_L3_CLKCTRL_INDEX(offset)	((offset) - AM3_GFX_L3_CLKCTRL_OFFSET)
-#define AM3_GFX_CLKCTRL	AM3_GFX_L3_CLKCTRL_INDEX(0x4)
-
-/* l4_cefuse clocks */
-#define AM3_L4_CEFUSE_CLKCTRL_OFFSET	0x20
-#define AM3_L4_CEFUSE_CLKCTRL_INDEX(offset)	((offset) - AM3_L4_CEFUSE_CLKCTRL_OFFSET)
-#define AM3_CEFUSE_CLKCTRL	AM3_L4_CEFUSE_CLKCTRL_INDEX(0x20)
-
-/* XXX: Compatibility part end */
-
 /* l4ls clocks */
 #define AM3_L4LS_CLKCTRL_OFFSET	0x38
 #define AM3_L4LS_CLKCTRL_INDEX(offset)	((offset) - AM3_L4LS_CLKCTRL_OFFSET)
-- 
cgit v1.2.3


From e65eb2efc6175392f0e97f515e6e5b179e181cd8 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 3 Feb 2022 10:56:17 +0200
Subject: clk: ti: Drop legacy compatibility clocks for am4

We no longer have users for the compatibility clocks and we can drop them.
These are old duplicate clocks for what we using.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220203085618.16043-3-tony@atomide.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/Makefile          |   3 +-
 drivers/clk/ti/clk-43xx-compat.c | 225 ---------------------------------------
 drivers/clk/ti/clk-43xx.c        |   5 +-
 drivers/clk/ti/clkctrl.c         |  16 +--
 drivers/clk/ti/clock.h           |   3 -
 include/dt-bindings/clock/am4.h  |  98 -----------------
 6 files changed, 6 insertions(+), 344 deletions(-)
 delete mode 100644 drivers/clk/ti/clk-43xx-compat.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index b9f54c7b50fd..eb20c1e9bb95 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -18,8 +18,7 @@ obj-$(CONFIG_SOC_OMAP5)			+= $(clk-common) clk-54xx.o \
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clk-common) clk-7xx.o \
 					   clk-dra7-atl.o dpll3xxx.o \
 					   dpll44xx.o clk-7xx-compat.o
-obj-$(CONFIG_SOC_AM43XX)		+= $(clk-common) dpll3xxx.o clk-43xx.o \
-					   clk-43xx-compat.o
+obj-$(CONFIG_SOC_AM43XX)		+= $(clk-common) dpll3xxx.o clk-43xx.o
 
 endif	# CONFIG_ARCH_OMAP2PLUS
 
diff --git a/drivers/clk/ti/clk-43xx-compat.c b/drivers/clk/ti/clk-43xx-compat.c
deleted file mode 100644
index 513039843392..000000000000
--- a/drivers/clk/ti/clk-43xx-compat.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * AM43XX Clock init
- *
- * Copyright (C) 2013 Texas Instruments, Inc
- *     Tero Kristo (t-kristo@ti.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/ti.h>
-#include <dt-bindings/clock/am4.h>
-
-#include "clock.h"
-
-static const char * const am4_synctimer_32kclk_parents[] __initconst = {
-	"mux_synctimer32k_ck",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_counter_32k_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_synctimer_32kclk_parents, NULL },
-	{ 0 },
-};
-
-static const char * const am4_gpio0_dbclk_parents[] __initconst = {
-	"gpio0_dbclk_mux_ck",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio0_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_wkup_clkctrl_regs[] __initconst = {
-	{ AM4_ADC_TSC_CLKCTRL, NULL, CLKF_SW_SUP, "adc_tsc_fck", "l3s_tsc_clkdm" },
-	{ AM4_L4_WKUP_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
-	{ AM4_WKUP_M3_CLKCTRL, NULL, CLKF_NO_IDLEST, "sys_clkin_ck" },
-	{ AM4_COUNTER_32K_CLKCTRL, am4_counter_32k_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0210:8" },
-	{ AM4_TIMER1_CLKCTRL, NULL, CLKF_SW_SUP, "timer1_fck", "l4_wkup_clkdm" },
-	{ AM4_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "wdt1_fck", "l4_wkup_clkdm" },
-	{ AM4_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck", "l4_wkup_clkdm" },
-	{ AM4_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_wkupdm_ck", "l4_wkup_clkdm" },
-	{ AM4_SMARTREFLEX0_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex0_fck", "l4_wkup_clkdm" },
-	{ AM4_SMARTREFLEX1_CLKCTRL, NULL, CLKF_SW_SUP, "smartreflex1_fck", "l4_wkup_clkdm" },
-	{ AM4_CONTROL_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
-	{ AM4_GPIO1_CLKCTRL, am4_gpio1_bit_data, CLKF_SW_SUP, "sys_clkin_ck", "l4_wkup_clkdm" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_mpu_clkctrl_regs[] __initconst = {
-	{ AM4_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_mpu_m2_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_gfx_l3_clkctrl_regs[] __initconst = {
-	{ AM4_GFX_CLKCTRL, NULL, CLKF_SW_SUP, "gfx_fck_div_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_rtc_clkctrl_regs[] __initconst = {
-	{ AM4_RTC_CLKCTRL, NULL, CLKF_SW_SUP, "clk_32768_ck" },
-	{ 0 },
-};
-
-static const char * const am4_usb_otg_ss0_refclk960m_parents[] __initconst = {
-	"dpll_per_clkdcoldo",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_usb_otg_ss0_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_usb_otg_ss1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_usb_otg_ss0_refclk960m_parents, NULL },
-	{ 0 },
-};
-
-static const char * const am4_gpio1_dbclk_parents[] __initconst = {
-	"clkdiv32k_ick",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio2_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio3_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio4_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio5_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data am4_gpio6_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, am4_gpio1_dbclk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data am4_l4_per_clkctrl_regs[] __initconst = {
-	{ AM4_L3_MAIN_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_AES_CLKCTRL, NULL, CLKF_SW_SUP, "aes0_fck", "l3_clkdm" },
-	{ AM4_DES_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_L3_INSTR_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_OCMCRAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_SHAM_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_VPFE0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3s_clkdm" },
-	{ AM4_VPFE1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3s_clkdm" },
-	{ AM4_TPCC_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_TPTC1_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_TPTC2_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
-	{ AM4_L4_HS_CLKCTRL, NULL, CLKF_SW_SUP, "l4hs_gclk", "l3_clkdm" },
-	{ AM4_GPMC_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
-	{ AM4_MCASP0_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp0_fck", "l3s_clkdm" },
-	{ AM4_MCASP1_CLKCTRL, NULL, CLKF_SW_SUP, "mcasp1_fck", "l3s_clkdm" },
-	{ AM4_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk", "l3s_clkdm" },
-	{ AM4_QSPI_CLKCTRL, NULL, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
-	{ AM4_USB_OTG_SS0_CLKCTRL, am4_usb_otg_ss0_bit_data, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
-	{ AM4_USB_OTG_SS1_CLKCTRL, am4_usb_otg_ss1_bit_data, CLKF_SW_SUP, "l3s_gclk", "l3s_clkdm" },
-	{ AM4_PRUSS_CLKCTRL, NULL, CLKF_SW_SUP, "pruss_ocp_gclk", "pruss_ocp_clkdm" },
-	{ AM4_L4_LS_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_D_CAN0_CLKCTRL, NULL, CLKF_SW_SUP, "dcan0_fck" },
-	{ AM4_D_CAN1_CLKCTRL, NULL, CLKF_SW_SUP, "dcan1_fck" },
-	{ AM4_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EPWMSS3_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EPWMSS4_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EPWMSS5_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_ELM_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_GPIO2_CLKCTRL, am4_gpio2_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_GPIO3_CLKCTRL, am4_gpio3_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_GPIO4_CLKCTRL, am4_gpio4_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_GPIO5_CLKCTRL, am4_gpio5_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_GPIO6_CLKCTRL, am4_gpio6_bit_data, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_clk" },
-	{ AM4_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_MAILBOX_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_MMC1_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
-	{ AM4_MMC2_CLKCTRL, NULL, CLKF_SW_SUP, "mmc_clk" },
-	{ AM4_RNG_CLKCTRL, NULL, CLKF_SW_SUP, "rng_fck" },
-	{ AM4_SPI0_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_SPI1_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_SPI2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_SPI3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_SPI4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_SPINLOCK_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "timer2_fck" },
-	{ AM4_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "timer3_fck" },
-	{ AM4_TIMER4_CLKCTRL, NULL, CLKF_SW_SUP, "timer4_fck" },
-	{ AM4_TIMER5_CLKCTRL, NULL, CLKF_SW_SUP, "timer5_fck" },
-	{ AM4_TIMER6_CLKCTRL, NULL, CLKF_SW_SUP, "timer6_fck" },
-	{ AM4_TIMER7_CLKCTRL, NULL, CLKF_SW_SUP, "timer7_fck" },
-	{ AM4_TIMER8_CLKCTRL, NULL, CLKF_SW_SUP, "timer8_fck" },
-	{ AM4_TIMER9_CLKCTRL, NULL, CLKF_SW_SUP, "timer9_fck" },
-	{ AM4_TIMER10_CLKCTRL, NULL, CLKF_SW_SUP, "timer10_fck" },
-	{ AM4_TIMER11_CLKCTRL, NULL, CLKF_SW_SUP, "timer11_fck" },
-	{ AM4_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_UART4_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_UART5_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_UART6_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_per_m2_div4_ck" },
-	{ AM4_OCP2SCP0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_OCP2SCP1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
-	{ AM4_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_ck", "emif_clkdm" },
-	{ AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "disp_clk", "dss_clkdm" },
-	{ AM4_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
-	{ 0 },
-};
-
-const struct omap_clkctrl_data am4_clkctrl_compat_data[] __initconst = {
-	{ 0x44df2820, am4_l4_wkup_clkctrl_regs },
-	{ 0x44df8320, am4_mpu_clkctrl_regs },
-	{ 0x44df8420, am4_gfx_l3_clkctrl_regs },
-	{ 0x44df8520, am4_l4_rtc_clkctrl_regs },
-	{ 0x44df8820, am4_l4_per_clkctrl_regs },
-	{ 0 },
-};
-
-const struct omap_clkctrl_data am438x_clkctrl_compat_data[] __initconst = {
-	{ 0x44df2820, am4_l4_wkup_clkctrl_regs },
-	{ 0x44df8320, am4_mpu_clkctrl_regs },
-	{ 0x44df8420, am4_gfx_l3_clkctrl_regs },
-	{ 0x44df8820, am4_l4_per_clkctrl_regs },
-	{ 0 },
-};
-
-struct ti_dt_clk am43xx_compat_clks[] = {
-	DT_CLK(NULL, "timer_32k_ck", "clkdiv32k_ick"),
-	DT_CLK(NULL, "timer_sys_ck", "sys_clkin_ck"),
-	DT_CLK(NULL, "gpio0_dbclk", "l4_wkup_cm:0348:8"),
-	DT_CLK(NULL, "gpio1_dbclk", "l4_per_cm:0458:8"),
-	DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:0460:8"),
-	DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:0468:8"),
-	DT_CLK(NULL, "gpio4_dbclk", "l4_per_cm:0470:8"),
-	DT_CLK(NULL, "gpio5_dbclk", "l4_per_cm:0478:8"),
-	DT_CLK(NULL, "synctimer_32kclk", "l4_wkup_cm:0210:8"),
-	DT_CLK(NULL, "usb_otg_ss0_refclk960m", "l4_per_cm:0240:8"),
-	DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l4_per_cm:0248:8"),
-	{ .node_name = NULL },
-};
diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
index 6e97a541cfd3..2ff4ff3d95d5 100644
--- a/drivers/clk/ti/clk-43xx.c
+++ b/drivers/clk/ti/clk-43xx.c
@@ -282,10 +282,7 @@ int __init am43xx_dt_clk_init(void)
 {
 	struct clk *clk1, *clk2;
 
-	if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-		ti_dt_clocks_register(am43xx_compat_clks);
-	else
-		ti_dt_clocks_register(am43xx_clks);
+	ti_dt_clocks_register(am43xx_clks);
 
 	omap2_clk_disable_autoidle_all();
 
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index b2778252716f..cccdb868cf4b 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -564,19 +564,11 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 		data = am3_clkctrl_data;
 #endif
 #ifdef CONFIG_SOC_AM43XX
-	if (of_machine_is_compatible("ti,am4372")) {
-		if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-			data = am4_clkctrl_compat_data;
-		else
-			data = am4_clkctrl_data;
-	}
+	if (of_machine_is_compatible("ti,am4372"))
+		data = am4_clkctrl_data;
 
-	if (of_machine_is_compatible("ti,am438x")) {
-		if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-			data = am438x_clkctrl_compat_data;
-		else
-			data = am438x_clkctrl_data;
-	}
+	if (of_machine_is_compatible("ti,am438x"))
+		data = am438x_clkctrl_data;
 #endif
 #ifdef CONFIG_SOC_TI81XX
 	if (of_machine_is_compatible("ti,dm814"))
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 938f34e290ed..c841d2d28111 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -201,10 +201,7 @@ extern const struct omap_clkctrl_data am3_clkctrl_data[];
 extern const struct omap_clkctrl_data am3_clkctrl_compat_data[];
 extern struct ti_dt_clk am33xx_compat_clks[];
 extern const struct omap_clkctrl_data am4_clkctrl_data[];
-extern const struct omap_clkctrl_data am4_clkctrl_compat_data[];
-extern struct ti_dt_clk am43xx_compat_clks[];
 extern const struct omap_clkctrl_data am438x_clkctrl_data[];
-extern const struct omap_clkctrl_data am438x_clkctrl_compat_data[];
 extern const struct omap_clkctrl_data dm814_clkctrl_data[];
 extern const struct omap_clkctrl_data dm816_clkctrl_data[];
 
diff --git a/include/dt-bindings/clock/am4.h b/include/dt-bindings/clock/am4.h
index 4be6c5961f34..a65b082e9cff 100644
--- a/include/dt-bindings/clock/am4.h
+++ b/include/dt-bindings/clock/am4.h
@@ -8,104 +8,6 @@
 #define AM4_CLKCTRL_OFFSET	0x20
 #define AM4_CLKCTRL_INDEX(offset)	((offset) - AM4_CLKCTRL_OFFSET)
 
-/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
-
-/* l4_wkup clocks */
-#define AM4_ADC_TSC_CLKCTRL	AM4_CLKCTRL_INDEX(0x120)
-#define AM4_L4_WKUP_CLKCTRL	AM4_CLKCTRL_INDEX(0x220)
-#define AM4_WKUP_M3_CLKCTRL	AM4_CLKCTRL_INDEX(0x228)
-#define AM4_COUNTER_32K_CLKCTRL	AM4_CLKCTRL_INDEX(0x230)
-#define AM4_TIMER1_CLKCTRL	AM4_CLKCTRL_INDEX(0x328)
-#define AM4_WD_TIMER2_CLKCTRL	AM4_CLKCTRL_INDEX(0x338)
-#define AM4_I2C1_CLKCTRL	AM4_CLKCTRL_INDEX(0x340)
-#define AM4_UART1_CLKCTRL	AM4_CLKCTRL_INDEX(0x348)
-#define AM4_SMARTREFLEX0_CLKCTRL	AM4_CLKCTRL_INDEX(0x350)
-#define AM4_SMARTREFLEX1_CLKCTRL	AM4_CLKCTRL_INDEX(0x358)
-#define AM4_CONTROL_CLKCTRL	AM4_CLKCTRL_INDEX(0x360)
-#define AM4_GPIO1_CLKCTRL	AM4_CLKCTRL_INDEX(0x368)
-
-/* mpu clocks */
-#define AM4_MPU_CLKCTRL	AM4_CLKCTRL_INDEX(0x20)
-
-/* gfx_l3 clocks */
-#define AM4_GFX_CLKCTRL	AM4_CLKCTRL_INDEX(0x20)
-
-/* l4_rtc clocks */
-#define AM4_RTC_CLKCTRL	AM4_CLKCTRL_INDEX(0x20)
-
-/* l4_per clocks */
-#define AM4_L3_MAIN_CLKCTRL	AM4_CLKCTRL_INDEX(0x20)
-#define AM4_AES_CLKCTRL	AM4_CLKCTRL_INDEX(0x28)
-#define AM4_DES_CLKCTRL	AM4_CLKCTRL_INDEX(0x30)
-#define AM4_L3_INSTR_CLKCTRL	AM4_CLKCTRL_INDEX(0x40)
-#define AM4_OCMCRAM_CLKCTRL	AM4_CLKCTRL_INDEX(0x50)
-#define AM4_SHAM_CLKCTRL	AM4_CLKCTRL_INDEX(0x58)
-#define AM4_VPFE0_CLKCTRL	AM4_CLKCTRL_INDEX(0x68)
-#define AM4_VPFE1_CLKCTRL	AM4_CLKCTRL_INDEX(0x70)
-#define AM4_TPCC_CLKCTRL	AM4_CLKCTRL_INDEX(0x78)
-#define AM4_TPTC0_CLKCTRL	AM4_CLKCTRL_INDEX(0x80)
-#define AM4_TPTC1_CLKCTRL	AM4_CLKCTRL_INDEX(0x88)
-#define AM4_TPTC2_CLKCTRL	AM4_CLKCTRL_INDEX(0x90)
-#define AM4_L4_HS_CLKCTRL	AM4_CLKCTRL_INDEX(0xa0)
-#define AM4_GPMC_CLKCTRL	AM4_CLKCTRL_INDEX(0x220)
-#define AM4_MCASP0_CLKCTRL	AM4_CLKCTRL_INDEX(0x238)
-#define AM4_MCASP1_CLKCTRL	AM4_CLKCTRL_INDEX(0x240)
-#define AM4_MMC3_CLKCTRL	AM4_CLKCTRL_INDEX(0x248)
-#define AM4_QSPI_CLKCTRL	AM4_CLKCTRL_INDEX(0x258)
-#define AM4_USB_OTG_SS0_CLKCTRL	AM4_CLKCTRL_INDEX(0x260)
-#define AM4_USB_OTG_SS1_CLKCTRL	AM4_CLKCTRL_INDEX(0x268)
-#define AM4_PRUSS_CLKCTRL	AM4_CLKCTRL_INDEX(0x320)
-#define AM4_L4_LS_CLKCTRL	AM4_CLKCTRL_INDEX(0x420)
-#define AM4_D_CAN0_CLKCTRL	AM4_CLKCTRL_INDEX(0x428)
-#define AM4_D_CAN1_CLKCTRL	AM4_CLKCTRL_INDEX(0x430)
-#define AM4_EPWMSS0_CLKCTRL	AM4_CLKCTRL_INDEX(0x438)
-#define AM4_EPWMSS1_CLKCTRL	AM4_CLKCTRL_INDEX(0x440)
-#define AM4_EPWMSS2_CLKCTRL	AM4_CLKCTRL_INDEX(0x448)
-#define AM4_EPWMSS3_CLKCTRL	AM4_CLKCTRL_INDEX(0x450)
-#define AM4_EPWMSS4_CLKCTRL	AM4_CLKCTRL_INDEX(0x458)
-#define AM4_EPWMSS5_CLKCTRL	AM4_CLKCTRL_INDEX(0x460)
-#define AM4_ELM_CLKCTRL	AM4_CLKCTRL_INDEX(0x468)
-#define AM4_GPIO2_CLKCTRL	AM4_CLKCTRL_INDEX(0x478)
-#define AM4_GPIO3_CLKCTRL	AM4_CLKCTRL_INDEX(0x480)
-#define AM4_GPIO4_CLKCTRL	AM4_CLKCTRL_INDEX(0x488)
-#define AM4_GPIO5_CLKCTRL	AM4_CLKCTRL_INDEX(0x490)
-#define AM4_GPIO6_CLKCTRL	AM4_CLKCTRL_INDEX(0x498)
-#define AM4_HDQ1W_CLKCTRL	AM4_CLKCTRL_INDEX(0x4a0)
-#define AM4_I2C2_CLKCTRL	AM4_CLKCTRL_INDEX(0x4a8)
-#define AM4_I2C3_CLKCTRL	AM4_CLKCTRL_INDEX(0x4b0)
-#define AM4_MAILBOX_CLKCTRL	AM4_CLKCTRL_INDEX(0x4b8)
-#define AM4_MMC1_CLKCTRL	AM4_CLKCTRL_INDEX(0x4c0)
-#define AM4_MMC2_CLKCTRL	AM4_CLKCTRL_INDEX(0x4c8)
-#define AM4_RNG_CLKCTRL	AM4_CLKCTRL_INDEX(0x4e0)
-#define AM4_SPI0_CLKCTRL	AM4_CLKCTRL_INDEX(0x500)
-#define AM4_SPI1_CLKCTRL	AM4_CLKCTRL_INDEX(0x508)
-#define AM4_SPI2_CLKCTRL	AM4_CLKCTRL_INDEX(0x510)
-#define AM4_SPI3_CLKCTRL	AM4_CLKCTRL_INDEX(0x518)
-#define AM4_SPI4_CLKCTRL	AM4_CLKCTRL_INDEX(0x520)
-#define AM4_SPINLOCK_CLKCTRL	AM4_CLKCTRL_INDEX(0x528)
-#define AM4_TIMER2_CLKCTRL	AM4_CLKCTRL_INDEX(0x530)
-#define AM4_TIMER3_CLKCTRL	AM4_CLKCTRL_INDEX(0x538)
-#define AM4_TIMER4_CLKCTRL	AM4_CLKCTRL_INDEX(0x540)
-#define AM4_TIMER5_CLKCTRL	AM4_CLKCTRL_INDEX(0x548)
-#define AM4_TIMER6_CLKCTRL	AM4_CLKCTRL_INDEX(0x550)
-#define AM4_TIMER7_CLKCTRL	AM4_CLKCTRL_INDEX(0x558)
-#define AM4_TIMER8_CLKCTRL	AM4_CLKCTRL_INDEX(0x560)
-#define AM4_TIMER9_CLKCTRL	AM4_CLKCTRL_INDEX(0x568)
-#define AM4_TIMER10_CLKCTRL	AM4_CLKCTRL_INDEX(0x570)
-#define AM4_TIMER11_CLKCTRL	AM4_CLKCTRL_INDEX(0x578)
-#define AM4_UART2_CLKCTRL	AM4_CLKCTRL_INDEX(0x580)
-#define AM4_UART3_CLKCTRL	AM4_CLKCTRL_INDEX(0x588)
-#define AM4_UART4_CLKCTRL	AM4_CLKCTRL_INDEX(0x590)
-#define AM4_UART5_CLKCTRL	AM4_CLKCTRL_INDEX(0x598)
-#define AM4_UART6_CLKCTRL	AM4_CLKCTRL_INDEX(0x5a0)
-#define AM4_OCP2SCP0_CLKCTRL	AM4_CLKCTRL_INDEX(0x5b8)
-#define AM4_OCP2SCP1_CLKCTRL	AM4_CLKCTRL_INDEX(0x5c0)
-#define AM4_EMIF_CLKCTRL	AM4_CLKCTRL_INDEX(0x720)
-#define AM4_DSS_CORE_CLKCTRL	AM4_CLKCTRL_INDEX(0xa20)
-#define AM4_CPGMAC0_CLKCTRL	AM4_CLKCTRL_INDEX(0xb20)
-
-/* XXX: Compatibility part end. */
-
 /* l3s_tsc clocks */
 #define AM4_L3S_TSC_CLKCTRL_OFFSET	0x120
 #define AM4_L3S_TSC_CLKCTRL_INDEX(offset)	((offset) - AM4_L3S_TSC_CLKCTRL_OFFSET)
-- 
cgit v1.2.3


From 579cdf58b7e50fa0650324667d240ecf45c7d12f Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Thu, 3 Feb 2022 10:56:18 +0200
Subject: clk: ti: Drop legacy compatibility clocks for dra7

We no longer have users for the compatibility clocks and we can drop them.
These are old duplicate clocks for what we using.

Depends-on: 31aa7056bbec ("ARM: dts: Don't use legacy clock defines for dra7 clkctrl")
Depends-on: 9206a3af4fc0 ("clk: ti: Move dra7 clock devices out of the legacy section")
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220203085618.16043-4-tony@atomide.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/Makefile          |   3 +-
 drivers/clk/ti/clk-7xx-compat.c  | 820 ---------------------------------------
 drivers/clk/ti/clk-7xx.c         |   5 +-
 drivers/clk/ti/clkctrl.c         |   9 +-
 include/dt-bindings/clock/dra7.h | 168 --------
 5 files changed, 5 insertions(+), 1000 deletions(-)
 delete mode 100644 drivers/clk/ti/clk-7xx-compat.c

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index eb20c1e9bb95..2c6315cfd5c6 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -17,7 +17,8 @@ obj-$(CONFIG_SOC_OMAP5)			+= $(clk-common) clk-54xx.o \
 					   dpll3xxx.o dpll44xx.o
 obj-$(CONFIG_SOC_DRA7XX)		+= $(clk-common) clk-7xx.o \
 					   clk-dra7-atl.o dpll3xxx.o \
-					   dpll44xx.o clk-7xx-compat.o
+					   dpll44xx.o
+
 obj-$(CONFIG_SOC_AM43XX)		+= $(clk-common) dpll3xxx.o clk-43xx.o
 
 endif	# CONFIG_ARCH_OMAP2PLUS
diff --git a/drivers/clk/ti/clk-7xx-compat.c b/drivers/clk/ti/clk-7xx-compat.c
deleted file mode 100644
index ddf7c8277946..000000000000
--- a/drivers/clk/ti/clk-7xx-compat.c
+++ /dev/null
@@ -1,820 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DRA7 Clock init
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * Tero Kristo (t-kristo@ti.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clk/ti.h>
-#include <dt-bindings/clock/dra7.h>
-
-#include "clock.h"
-
-#define DRA7_DPLL_GMAC_DEFFREQ				1000000000
-#define DRA7_DPLL_USB_DEFFREQ				960000000
-
-static const struct omap_clkctrl_reg_data dra7_mpu_clkctrl_regs[] __initconst = {
-	{ DRA7_MPU_CLKCTRL, NULL, 0, "dpll_mpu_m2_ck" },
-	{ 0 },
-};
-
-static const char * const dra7_mcasp1_aux_gfclk_mux_parents[] __initconst = {
-	"per_abe_x1_gfclk2_div",
-	"video1_clk2_div",
-	"video2_clk2_div",
-	"hdmi_clk2_div",
-	NULL,
-};
-
-static const char * const dra7_mcasp1_ahclkx_mux_parents[] __initconst = {
-	"abe_24m_fclk",
-	"abe_sys_clk_div",
-	"func_24m_clk",
-	"atl_clkin3_ck",
-	"atl_clkin2_ck",
-	"atl_clkin1_ck",
-	"atl_clkin0_ck",
-	"sys_clkin2",
-	"ref_clkin0_ck",
-	"ref_clkin1_ck",
-	"ref_clkin2_ck",
-	"ref_clkin3_ck",
-	"mlb_clk",
-	"mlbp_clk",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp1_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_timer5_gfclk_mux_parents[] __initconst = {
-	"timer_sys_clk_div",
-	"sys_32k_ck",
-	"sys_clkin2",
-	"ref_clkin0_ck",
-	"ref_clkin1_ck",
-	"ref_clkin2_ck",
-	"ref_clkin3_ck",
-	"abe_giclk_div",
-	"video1_div_clk",
-	"video2_div_clk",
-	"hdmi_div_clk",
-	"clkoutmux0_clk_mux",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer5_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer6_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer7_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer8_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer5_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_uart6_gfclk_mux_parents[] __initconst = {
-	"func_48m_fclk",
-	"dpll_per_m2x2_ck",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart6_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_ipu_clkctrl_regs[] __initconst = {
-	{ DRA7_MCASP1_CLKCTRL, dra7_mcasp1_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0010:22" },
-	{ DRA7_TIMER5_CLKCTRL, dra7_timer5_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0018:24" },
-	{ DRA7_TIMER6_CLKCTRL, dra7_timer6_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0020:24" },
-	{ DRA7_TIMER7_CLKCTRL, dra7_timer7_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0028:24" },
-	{ DRA7_TIMER8_CLKCTRL, dra7_timer8_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0030:24" },
-	{ DRA7_I2C5_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
-	{ DRA7_UART6_CLKCTRL, dra7_uart6_bit_data, CLKF_SW_SUP, "ipu_cm:clk:0040:24" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_rtc_clkctrl_regs[] __initconst = {
-	{ DRA7_RTCSS_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_coreaon_clkctrl_regs[] __initconst = {
-	{ DRA7_SMARTREFLEX_MPU_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
-	{ DRA7_SMARTREFLEX_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "wkupaon_iclk_mux" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3main1_clkctrl_regs[] __initconst = {
-	{ DRA7_L3_MAIN_1_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_GPMC_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_TPCC_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_TPTC0_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_TPTC1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_VCP1_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_VCP2_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_dma_clkctrl_regs[] __initconst = {
-	{ DRA7_DMA_SYSTEM_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_emif_clkctrl_regs[] __initconst = {
-	{ DRA7_DMM_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ 0 },
-};
-
-static const char * const dra7_atl_dpll_clk_mux_parents[] __initconst = {
-	"sys_32k_ck",
-	"video1_clkin_ck",
-	"video2_clkin_ck",
-	"hdmi_clkin_ck",
-	NULL,
-};
-
-static const char * const dra7_atl_gfclk_mux_parents[] __initconst = {
-	"l3_iclk_div",
-	"dpll_abe_m2_ck",
-	"atl_cm:clk:0000:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_atl_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_atl_dpll_clk_mux_parents, NULL },
-	{ 26, TI_CLK_MUX, dra7_atl_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_atl_clkctrl_regs[] __initconst = {
-	{ DRA7_ATL_CLKCTRL, dra7_atl_bit_data, CLKF_SW_SUP, "atl_cm:clk:0000:26" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l4cfg_clkctrl_regs[] __initconst = {
-	{ DRA7_L4_CFG_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_SPINLOCK_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX1_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX2_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX3_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX4_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX5_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX6_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX7_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX8_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX9_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX10_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX11_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX12_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_MAILBOX13_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3instr_clkctrl_regs[] __initconst = {
-	{ DRA7_L3_MAIN_2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_L3_INSTR_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div" },
-	{ 0 },
-};
-
-static const char * const dra7_dss_dss_clk_parents[] __initconst = {
-	"dpll_per_h12x2_ck",
-	NULL,
-};
-
-static const char * const dra7_dss_48mhz_clk_parents[] __initconst = {
-	"func_48m_fclk",
-	NULL,
-};
-
-static const char * const dra7_dss_hdmi_clk_parents[] __initconst = {
-	"hdmi_dpll_clk_mux",
-	NULL,
-};
-
-static const char * const dra7_dss_32khz_clk_parents[] __initconst = {
-	"sys_32k_ck",
-	NULL,
-};
-
-static const char * const dra7_dss_video1_clk_parents[] __initconst = {
-	"video1_dpll_clk_mux",
-	NULL,
-};
-
-static const char * const dra7_dss_video2_clk_parents[] __initconst = {
-	"video2_dpll_clk_mux",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_dss_core_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_dss_clk_parents, NULL },
-	{ 9, TI_CLK_GATE, dra7_dss_48mhz_clk_parents, NULL },
-	{ 10, TI_CLK_GATE, dra7_dss_hdmi_clk_parents, NULL },
-	{ 11, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 12, TI_CLK_GATE, dra7_dss_video1_clk_parents, NULL },
-	{ 13, TI_CLK_GATE, dra7_dss_video2_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_dss_clkctrl_regs[] __initconst = {
-	{ DRA7_DSS_CORE_CLKCTRL, dra7_dss_core_bit_data, CLKF_SW_SUP, "dss_cm:clk:0000:8" },
-	{ DRA7_BB2D_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_core_h24x2_ck" },
-	{ 0 },
-};
-
-static const char * const dra7_mmc1_fclk_mux_parents[] __initconst = {
-	"func_128m_clk",
-	"dpll_per_m2x2_ck",
-	NULL,
-};
-
-static const char * const dra7_mmc1_fclk_div_parents[] __initconst = {
-	"l3init_cm:clk:0008:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc1_fclk_div_data __initconst = {
-	.max_div = 4,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
-	{ 25, TI_CLK_DIVIDER, dra7_mmc1_fclk_div_parents, &dra7_mmc1_fclk_div_data },
-	{ 0 },
-};
-
-static const char * const dra7_mmc2_fclk_div_parents[] __initconst = {
-	"l3init_cm:clk:0010:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc2_fclk_div_data __initconst = {
-	.max_div = 4,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc2_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mmc1_fclk_mux_parents, NULL },
-	{ 25, TI_CLK_DIVIDER, dra7_mmc2_fclk_div_parents, &dra7_mmc2_fclk_div_data },
-	{ 0 },
-};
-
-static const char * const dra7_usb_otg_ss2_refclk960m_parents[] __initconst = {
-	"l3init_960m_gfclk",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_usb_otg_ss2_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_sata_ref_clk_parents[] __initconst = {
-	"sys_clkin1",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_sata_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_sata_ref_clk_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_optfclk_pciephy1_clk_parents[] __initconst = {
-	"apll_pcie_ck",
-	NULL,
-};
-
-static const char * const dra7_optfclk_pciephy1_div_clk_parents[] __initconst = {
-	"optfclk_pciephy_div",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_pcie1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
-	{ 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_pcie2_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 9, TI_CLK_GATE, dra7_optfclk_pciephy1_clk_parents, NULL },
-	{ 10, TI_CLK_GATE, dra7_optfclk_pciephy1_div_clk_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_rmii_50mhz_clk_mux_parents[] __initconst = {
-	"dpll_gmac_h11x2_ck",
-	"rmii_clk_ck",
-	NULL,
-};
-
-static const char * const dra7_gmac_rft_clk_mux_parents[] __initconst = {
-	"video1_clkin_ck",
-	"video2_clkin_ck",
-	"dpll_abe_m2_ck",
-	"hdmi_clkin_ck",
-	"l3_iclk_div",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_gmac_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_rmii_50mhz_clk_mux_parents, NULL },
-	{ 25, TI_CLK_MUX, dra7_gmac_rft_clk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_usb_otg_ss1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_usb_otg_ss2_refclk960m_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l3init_clkctrl_regs[] __initconst = {
-	{ DRA7_MMC1_CLKCTRL, dra7_mmc1_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0008:25" },
-	{ DRA7_MMC2_CLKCTRL, dra7_mmc2_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0010:25" },
-	{ DRA7_USB_OTG_SS2_CLKCTRL, dra7_usb_otg_ss2_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
-	{ DRA7_USB_OTG_SS3_CLKCTRL, NULL, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
-	{ DRA7_USB_OTG_SS4_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_DRA74 | CLKF_SOC_DRA76, "dpll_core_h13x2_ck" },
-	{ DRA7_SATA_CLKCTRL, dra7_sata_bit_data, CLKF_SW_SUP, "func_48m_fclk" },
-	{ DRA7_PCIE1_CLKCTRL, dra7_pcie1_bit_data, CLKF_SW_SUP, "l4_root_clk_div", "pcie_clkdm" },
-	{ DRA7_PCIE2_CLKCTRL, dra7_pcie2_bit_data, CLKF_SW_SUP, "l4_root_clk_div", "pcie_clkdm" },
-	{ DRA7_GMAC_CLKCTRL, dra7_gmac_bit_data, CLKF_SW_SUP, "dpll_gmac_ck", "gmac_clkdm" },
-	{ DRA7_OCP2SCP1_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
-	{ DRA7_OCP2SCP3_CLKCTRL, NULL, CLKF_HW_SUP, "l4_root_clk_div" },
-	{ DRA7_USB_OTG_SS1_CLKCTRL, dra7_usb_otg_ss1_bit_data, CLKF_HW_SUP, "dpll_core_h13x2_ck" },
-	{ 0 },
-};
-
-static const char * const dra7_timer10_gfclk_mux_parents[] __initconst = {
-	"timer_sys_clk_div",
-	"sys_32k_ck",
-	"sys_clkin2",
-	"ref_clkin0_ck",
-	"ref_clkin1_ck",
-	"ref_clkin2_ck",
-	"ref_clkin3_ck",
-	"abe_giclk_div",
-	"video1_div_clk",
-	"video2_div_clk",
-	"hdmi_div_clk",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer10_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer11_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer2_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer3_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer4_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer9_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio2_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio3_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio4_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio5_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio6_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer13_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer14_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer15_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio7_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio8_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_mmc3_gfclk_div_parents[] __initconst = {
-	"l4per_cm:clk:0120:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc3_gfclk_div_data __initconst = {
-	.max_div = 4,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc3_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 25, TI_CLK_DIVIDER, dra7_mmc3_gfclk_div_parents, &dra7_mmc3_gfclk_div_data },
-	{ 0 },
-};
-
-static const char * const dra7_mmc4_gfclk_div_parents[] __initconst = {
-	"l4per_cm:clk:0128:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_mmc4_gfclk_div_data __initconst = {
-	.max_div = 4,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_mmc4_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 25, TI_CLK_DIVIDER, dra7_mmc4_gfclk_div_parents, &dra7_mmc4_gfclk_div_data },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer16_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_qspi_gfclk_mux_parents[] __initconst = {
-	"func_128m_clk",
-	"dpll_per_h13x2_ck",
-	NULL,
-};
-
-static const char * const dra7_qspi_gfclk_div_parents[] __initconst = {
-	"l4per_cm:clk:0138:24",
-	NULL,
-};
-
-static const struct omap_clkctrl_div_data dra7_qspi_gfclk_div_data __initconst = {
-	.max_div = 4,
-	.flags = CLK_DIVIDER_POWER_OF_TWO,
-};
-
-static const struct omap_clkctrl_bit_data dra7_qspi_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_qspi_gfclk_mux_parents, NULL },
-	{ 25, TI_CLK_DIVIDER, dra7_qspi_gfclk_div_parents, &dra7_qspi_gfclk_div_data },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart1_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart2_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart3_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart4_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp2_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 28, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp3_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart5_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp5_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp8_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp4_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart7_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart8_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart9_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp6_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_mcasp7_bit_data[] __initconst = {
-	{ 22, TI_CLK_MUX, dra7_mcasp1_aux_gfclk_mux_parents, NULL },
-	{ 24, TI_CLK_MUX, dra7_mcasp1_ahclkx_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_l4per_clkctrl_regs[] __initconst = {
-	{ DRA7_L4_PER2_CLKCTRL, NULL, 0, "l3_iclk_div", "l4per2_clkdm" },
-	{ DRA7_L4_PER3_CLKCTRL, NULL, 0, "l3_iclk_div", "l4per3_clkdm" },
-	{ DRA7_TIMER10_CLKCTRL, dra7_timer10_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0028:24" },
-	{ DRA7_TIMER11_CLKCTRL, dra7_timer11_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0030:24" },
-	{ DRA7_TIMER2_CLKCTRL, dra7_timer2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0038:24" },
-	{ DRA7_TIMER3_CLKCTRL, dra7_timer3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0040:24" },
-	{ DRA7_TIMER4_CLKCTRL, dra7_timer4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0048:24" },
-	{ DRA7_TIMER9_CLKCTRL, dra7_timer9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0050:24" },
-	{ DRA7_ELM_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_GPIO2_CLKCTRL, dra7_gpio2_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_GPIO3_CLKCTRL, dra7_gpio3_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_GPIO4_CLKCTRL, dra7_gpio4_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_GPIO5_CLKCTRL, dra7_gpio5_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_GPIO6_CLKCTRL, dra7_gpio6_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_HDQ1W_CLKCTRL, NULL, CLKF_SW_SUP, "func_12m_fclk" },
-	{ DRA7_EPWMSS1_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
-	{ DRA7_EPWMSS2_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
-	{ DRA7_I2C1_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
-	{ DRA7_I2C2_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
-	{ DRA7_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
-	{ DRA7_I2C4_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" },
-	{ DRA7_L4_PER1_CLKCTRL, NULL, 0, "l3_iclk_div" },
-	{ DRA7_EPWMSS0_CLKCTRL, NULL, CLKF_SW_SUP, "l4_root_clk_div", "l4per2_clkdm" },
-	{ DRA7_TIMER13_CLKCTRL, dra7_timer13_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00c8:24", "l4per3_clkdm" },
-	{ DRA7_TIMER14_CLKCTRL, dra7_timer14_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00d0:24", "l4per3_clkdm" },
-	{ DRA7_TIMER15_CLKCTRL, dra7_timer15_bit_data, CLKF_SW_SUP, "l4per_cm:clk:00d8:24", "l4per3_clkdm" },
-	{ DRA7_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
-	{ DRA7_MCSPI2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
-	{ DRA7_MCSPI3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
-	{ DRA7_MCSPI4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" },
-	{ DRA7_GPIO7_CLKCTRL, dra7_gpio7_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_GPIO8_CLKCTRL, dra7_gpio8_bit_data, CLKF_HW_SUP, "l3_iclk_div" },
-	{ DRA7_MMC3_CLKCTRL, dra7_mmc3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0120:25" },
-	{ DRA7_MMC4_CLKCTRL, dra7_mmc4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0128:25" },
-	{ DRA7_TIMER16_CLKCTRL, dra7_timer16_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0130:24", "l4per3_clkdm" },
-	{ DRA7_QSPI_CLKCTRL, dra7_qspi_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0138:25", "l4per2_clkdm" },
-	{ DRA7_UART1_CLKCTRL, dra7_uart1_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0140:24" },
-	{ DRA7_UART2_CLKCTRL, dra7_uart2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0148:24" },
-	{ DRA7_UART3_CLKCTRL, dra7_uart3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0150:24" },
-	{ DRA7_UART4_CLKCTRL, dra7_uart4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0158:24" },
-	{ DRA7_MCASP2_CLKCTRL, dra7_mcasp2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0160:22", "l4per2_clkdm" },
-	{ DRA7_MCASP3_CLKCTRL, dra7_mcasp3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0168:22", "l4per2_clkdm" },
-	{ DRA7_UART5_CLKCTRL, dra7_uart5_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0170:24" },
-	{ DRA7_MCASP5_CLKCTRL, dra7_mcasp5_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0178:22", "l4per2_clkdm" },
-	{ DRA7_MCASP8_CLKCTRL, dra7_mcasp8_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0190:24", "l4per2_clkdm" },
-	{ DRA7_MCASP4_CLKCTRL, dra7_mcasp4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0198:22", "l4per2_clkdm" },
-	{ DRA7_AES1_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_AES2_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_DES_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_RNG_CLKCTRL, NULL, CLKF_HW_SUP | CLKF_SOC_NONSEC, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_SHAM_CLKCTRL, NULL, CLKF_HW_SUP, "l3_iclk_div", "l4sec_clkdm" },
-	{ DRA7_UART7_CLKCTRL, dra7_uart7_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01d0:24", "l4per2_clkdm" },
-	{ DRA7_UART8_CLKCTRL, dra7_uart8_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01e0:24", "l4per2_clkdm" },
-	{ DRA7_UART9_CLKCTRL, dra7_uart9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:01e8:24", "l4per2_clkdm" },
-	{ DRA7_DCAN2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_clkin1", "l4per2_clkdm" },
-	{ DRA7_MCASP6_CLKCTRL, dra7_mcasp6_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0204:22", "l4per2_clkdm" },
-	{ DRA7_MCASP7_CLKCTRL, dra7_mcasp7_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0208:22", "l4per2_clkdm" },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_gpio1_bit_data[] __initconst = {
-	{ 8, TI_CLK_GATE, dra7_dss_32khz_clk_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_timer1_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_timer10_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_bit_data dra7_uart10_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_uart6_gfclk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const char * const dra7_dcan1_sys_clk_mux_parents[] __initconst = {
-	"sys_clkin1",
-	"sys_clkin2",
-	NULL,
-};
-
-static const struct omap_clkctrl_bit_data dra7_dcan1_bit_data[] __initconst = {
-	{ 24, TI_CLK_MUX, dra7_dcan1_sys_clk_mux_parents, NULL },
-	{ 0 },
-};
-
-static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initconst = {
-	{ DRA7_L4_WKUP_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
-	{ DRA7_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" },
-	{ DRA7_GPIO1_CLKCTRL, dra7_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" },
-	{ DRA7_TIMER1_CLKCTRL, dra7_timer1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0020:24" },
-	{ DRA7_TIMER12_CLKCTRL, NULL, CLKF_SOC_NONSEC, "secure_32k_clk_src_ck" },
-	{ DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
-	{ DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" },
-	{ DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" },
-	{ DRA7_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk"},
-	{ 0 },
-};
-
-const struct omap_clkctrl_data dra7_clkctrl_compat_data[] __initconst = {
-	{ 0x4a005320, dra7_mpu_clkctrl_regs },
-	{ 0x4a005540, dra7_ipu_clkctrl_regs },
-	{ 0x4a005740, dra7_rtc_clkctrl_regs },
-	{ 0x4a008620, dra7_coreaon_clkctrl_regs },
-	{ 0x4a008720, dra7_l3main1_clkctrl_regs },
-	{ 0x4a008a20, dra7_dma_clkctrl_regs },
-	{ 0x4a008b20, dra7_emif_clkctrl_regs },
-	{ 0x4a008c00, dra7_atl_clkctrl_regs },
-	{ 0x4a008d20, dra7_l4cfg_clkctrl_regs },
-	{ 0x4a008e20, dra7_l3instr_clkctrl_regs },
-	{ 0x4a009120, dra7_dss_clkctrl_regs },
-	{ 0x4a009320, dra7_l3init_clkctrl_regs },
-	{ 0x4a009700, dra7_l4per_clkctrl_regs },
-	{ 0x4ae07820, dra7_wkupaon_clkctrl_regs },
-	{ 0 },
-};
-
-struct ti_dt_clk dra7xx_compat_clks[] = {
-	DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"),
-	DT_CLK(NULL, "sys_clkin_ck", "timer_sys_clk_div"),
-	DT_CLK(NULL, "sys_clkin", "sys_clkin1"),
-	DT_CLK(NULL, "atl_dpll_clk_mux", "atl_cm:0000:24"),
-	DT_CLK(NULL, "atl_gfclk_mux", "atl_cm:0000:26"),
-	DT_CLK(NULL, "dcan1_sys_clk_mux", "wkupaon_cm:0068:24"),
-	DT_CLK(NULL, "dss_32khz_clk", "dss_cm:0000:11"),
-	DT_CLK(NULL, "dss_48mhz_clk", "dss_cm:0000:9"),
-	DT_CLK(NULL, "dss_dss_clk", "dss_cm:0000:8"),
-	DT_CLK(NULL, "dss_hdmi_clk", "dss_cm:0000:10"),
-	DT_CLK(NULL, "dss_video1_clk", "dss_cm:0000:12"),
-	DT_CLK(NULL, "dss_video2_clk", "dss_cm:0000:13"),
-	DT_CLK(NULL, "gmac_rft_clk_mux", "l3init_cm:00b0:25"),
-	DT_CLK(NULL, "gpio1_dbclk", "wkupaon_cm:0018:8"),
-	DT_CLK(NULL, "gpio2_dbclk", "l4per_cm:0060:8"),
-	DT_CLK(NULL, "gpio3_dbclk", "l4per_cm:0068:8"),
-	DT_CLK(NULL, "gpio4_dbclk", "l4per_cm:0070:8"),
-	DT_CLK(NULL, "gpio5_dbclk", "l4per_cm:0078:8"),
-	DT_CLK(NULL, "gpio6_dbclk", "l4per_cm:0080:8"),
-	DT_CLK(NULL, "gpio7_dbclk", "l4per_cm:0110:8"),
-	DT_CLK(NULL, "gpio8_dbclk", "l4per_cm:0118:8"),
-	DT_CLK(NULL, "mcasp1_ahclkr_mux", "ipu_cm:0010:28"),
-	DT_CLK(NULL, "mcasp1_ahclkx_mux", "ipu_cm:0010:24"),
-	DT_CLK(NULL, "mcasp1_aux_gfclk_mux", "ipu_cm:0010:22"),
-	DT_CLK(NULL, "mcasp2_ahclkr_mux", "l4per_cm:0160:28"),
-	DT_CLK(NULL, "mcasp2_ahclkx_mux", "l4per_cm:0160:24"),
-	DT_CLK(NULL, "mcasp2_aux_gfclk_mux", "l4per_cm:0160:22"),
-	DT_CLK(NULL, "mcasp3_ahclkx_mux", "l4per_cm:0168:24"),
-	DT_CLK(NULL, "mcasp3_aux_gfclk_mux", "l4per_cm:0168:22"),
-	DT_CLK(NULL, "mcasp4_ahclkx_mux", "l4per_cm:0198:24"),
-	DT_CLK(NULL, "mcasp4_aux_gfclk_mux", "l4per_cm:0198:22"),
-	DT_CLK(NULL, "mcasp5_ahclkx_mux", "l4per_cm:0178:24"),
-	DT_CLK(NULL, "mcasp5_aux_gfclk_mux", "l4per_cm:0178:22"),
-	DT_CLK(NULL, "mcasp6_ahclkx_mux", "l4per_cm:0204:24"),
-	DT_CLK(NULL, "mcasp6_aux_gfclk_mux", "l4per_cm:0204:22"),
-	DT_CLK(NULL, "mcasp7_ahclkx_mux", "l4per_cm:0208:24"),
-	DT_CLK(NULL, "mcasp7_aux_gfclk_mux", "l4per_cm:0208:22"),
-	DT_CLK(NULL, "mcasp8_ahclkx_mux", "l4per_cm:0190:22"),
-	DT_CLK(NULL, "mcasp8_aux_gfclk_mux", "l4per_cm:0190:24"),
-	DT_CLK(NULL, "mmc1_clk32k", "l3init_cm:0008:8"),
-	DT_CLK(NULL, "mmc1_fclk_div", "l3init_cm:0008:25"),
-	DT_CLK(NULL, "mmc1_fclk_mux", "l3init_cm:0008:24"),
-	DT_CLK(NULL, "mmc2_clk32k", "l3init_cm:0010:8"),
-	DT_CLK(NULL, "mmc2_fclk_div", "l3init_cm:0010:25"),
-	DT_CLK(NULL, "mmc2_fclk_mux", "l3init_cm:0010:24"),
-	DT_CLK(NULL, "mmc3_clk32k", "l4per_cm:0120:8"),
-	DT_CLK(NULL, "mmc3_gfclk_div", "l4per_cm:0120:25"),
-	DT_CLK(NULL, "mmc3_gfclk_mux", "l4per_cm:0120:24"),
-	DT_CLK(NULL, "mmc4_clk32k", "l4per_cm:0128:8"),
-	DT_CLK(NULL, "mmc4_gfclk_div", "l4per_cm:0128:25"),
-	DT_CLK(NULL, "mmc4_gfclk_mux", "l4per_cm:0128:24"),
-	DT_CLK(NULL, "optfclk_pciephy1_32khz", "l3init_cm:0090:8"),
-	DT_CLK(NULL, "optfclk_pciephy1_clk", "l3init_cm:0090:9"),
-	DT_CLK(NULL, "optfclk_pciephy1_div_clk", "l3init_cm:0090:10"),
-	DT_CLK(NULL, "optfclk_pciephy2_32khz", "l3init_cm:0098:8"),
-	DT_CLK(NULL, "optfclk_pciephy2_clk", "l3init_cm:0098:9"),
-	DT_CLK(NULL, "optfclk_pciephy2_div_clk", "l3init_cm:0098:10"),
-	DT_CLK(NULL, "qspi_gfclk_div", "l4per_cm:0138:25"),
-	DT_CLK(NULL, "qspi_gfclk_mux", "l4per_cm:0138:24"),
-	DT_CLK(NULL, "rmii_50mhz_clk_mux", "l3init_cm:00b0:24"),
-	DT_CLK(NULL, "sata_ref_clk", "l3init_cm:0068:8"),
-	DT_CLK(NULL, "timer10_gfclk_mux", "l4per_cm:0028:24"),
-	DT_CLK(NULL, "timer11_gfclk_mux", "l4per_cm:0030:24"),
-	DT_CLK(NULL, "timer13_gfclk_mux", "l4per_cm:00c8:24"),
-	DT_CLK(NULL, "timer14_gfclk_mux", "l4per_cm:00d0:24"),
-	DT_CLK(NULL, "timer15_gfclk_mux", "l4per_cm:00d8:24"),
-	DT_CLK(NULL, "timer16_gfclk_mux", "l4per_cm:0130:24"),
-	DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon_cm:0020:24"),
-	DT_CLK(NULL, "timer2_gfclk_mux", "l4per_cm:0038:24"),
-	DT_CLK(NULL, "timer3_gfclk_mux", "l4per_cm:0040:24"),
-	DT_CLK(NULL, "timer4_gfclk_mux", "l4per_cm:0048:24"),
-	DT_CLK(NULL, "timer5_gfclk_mux", "ipu_cm:0018:24"),
-	DT_CLK(NULL, "timer6_gfclk_mux", "ipu_cm:0020:24"),
-	DT_CLK(NULL, "timer7_gfclk_mux", "ipu_cm:0028:24"),
-	DT_CLK(NULL, "timer8_gfclk_mux", "ipu_cm:0030:24"),
-	DT_CLK(NULL, "timer9_gfclk_mux", "l4per_cm:0050:24"),
-	DT_CLK(NULL, "uart10_gfclk_mux", "wkupaon_cm:0060:24"),
-	DT_CLK(NULL, "uart1_gfclk_mux", "l4per_cm:0140:24"),
-	DT_CLK(NULL, "uart2_gfclk_mux", "l4per_cm:0148:24"),
-	DT_CLK(NULL, "uart3_gfclk_mux", "l4per_cm:0150:24"),
-	DT_CLK(NULL, "uart4_gfclk_mux", "l4per_cm:0158:24"),
-	DT_CLK(NULL, "uart5_gfclk_mux", "l4per_cm:0170:24"),
-	DT_CLK(NULL, "uart6_gfclk_mux", "ipu_cm:0040:24"),
-	DT_CLK(NULL, "uart7_gfclk_mux", "l4per_cm:01d0:24"),
-	DT_CLK(NULL, "uart8_gfclk_mux", "l4per_cm:01e0:24"),
-	DT_CLK(NULL, "uart9_gfclk_mux", "l4per_cm:01e8:24"),
-	DT_CLK(NULL, "usb_otg_ss1_refclk960m", "l3init_cm:00d0:8"),
-	DT_CLK(NULL, "usb_otg_ss2_refclk960m", "l3init_cm:0020:8"),
-	{ .node_name = NULL },
-};
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index 8b9118ccd4cd..0f099441543f 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -946,10 +946,7 @@ int __init dra7xx_dt_clk_init(void)
 	int rc;
 	struct clk *dpll_ck, *hdcp_ck;
 
-	if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-		ti_dt_clocks_register(dra7xx_compat_clks);
-	else
-		ti_dt_clocks_register(dra7xx_clks);
+	ti_dt_clocks_register(dra7xx_clks);
 
 	omap2_clk_disable_autoidle_all();
 
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index cccdb868cf4b..792137a06069 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -545,13 +545,8 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 		data = omap5_clkctrl_data;
 #endif
 #ifdef CONFIG_SOC_DRA7XX
-	if (of_machine_is_compatible("ti,dra7")) {
-		if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
-			data = dra7_clkctrl_compat_data;
-		else
-			data = dra7_clkctrl_data;
-	}
-
+	if (of_machine_is_compatible("ti,dra7"))
+		data = dra7_clkctrl_data;
 	if (of_machine_is_compatible("ti,dra72"))
 		soc_mask = CLKF_SOC_DRA72;
 	if (of_machine_is_compatible("ti,dra74"))
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index 29ff6b895848..8a903c78c5a5 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -8,174 +8,6 @@
 #define DRA7_CLKCTRL_OFFSET	0x20
 #define DRA7_CLKCTRL_INDEX(offset)	((offset) - DRA7_CLKCTRL_OFFSET)
 
-/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */
-
-/* mpu clocks */
-#define DRA7_MPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-
-/* ipu clocks */
-#define _DRA7_IPU_CLKCTRL_OFFSET	0x40
-#define _DRA7_IPU_CLKCTRL_INDEX(offset)	((offset) - _DRA7_IPU_CLKCTRL_OFFSET)
-#define DRA7_MCASP1_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x50)
-#define DRA7_TIMER5_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x58)
-#define DRA7_TIMER6_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x60)
-#define DRA7_TIMER7_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x68)
-#define DRA7_TIMER8_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x70)
-#define DRA7_I2C5_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x78)
-#define DRA7_UART6_CLKCTRL	_DRA7_IPU_CLKCTRL_INDEX(0x80)
-
-/* rtc clocks */
-#define DRA7_RTC_CLKCTRL_OFFSET	0x40
-#define DRA7_RTC_CLKCTRL_INDEX(offset)	((offset) - DRA7_RTC_CLKCTRL_OFFSET)
-#define DRA7_RTCSS_CLKCTRL	DRA7_RTC_CLKCTRL_INDEX(0x44)
-
-/* vip clocks */
-#define DRA7_VIP1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_VIP2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-#define DRA7_VIP3_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
-
-/* vpe clocks */
-#define DRA7_VPE_CLKCTRL_OFFSET	0x60
-#define DRA7_VPE_CLKCTRL_INDEX(offset)	((offset) - DRA7_VPE_CLKCTRL_OFFSET)
-#define DRA7_VPE_CLKCTRL	DRA7_VPE_CLKCTRL_INDEX(0x64)
-
-/* coreaon clocks */
-#define DRA7_SMARTREFLEX_MPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-#define DRA7_SMARTREFLEX_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x38)
-
-/* l3main1 clocks */
-#define DRA7_L3_MAIN_1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_GPMC_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-#define DRA7_TPCC_CLKCTRL	DRA7_CLKCTRL_INDEX(0x70)
-#define DRA7_TPTC0_CLKCTRL	DRA7_CLKCTRL_INDEX(0x78)
-#define DRA7_TPTC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x80)
-#define DRA7_VCP1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x88)
-#define DRA7_VCP2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x90)
-
-/* dma clocks */
-#define DRA7_DMA_SYSTEM_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-
-/* emif clocks */
-#define DRA7_DMM_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-
-/* atl clocks */
-#define DRA7_ATL_CLKCTRL_OFFSET	0x0
-#define DRA7_ATL_CLKCTRL_INDEX(offset)	((offset) - DRA7_ATL_CLKCTRL_OFFSET)
-#define DRA7_ATL_CLKCTRL	DRA7_ATL_CLKCTRL_INDEX(0x0)
-
-/* l4cfg clocks */
-#define DRA7_L4_CFG_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_SPINLOCK_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-#define DRA7_MAILBOX1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
-#define DRA7_MAILBOX2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x48)
-#define DRA7_MAILBOX3_CLKCTRL	DRA7_CLKCTRL_INDEX(0x50)
-#define DRA7_MAILBOX4_CLKCTRL	DRA7_CLKCTRL_INDEX(0x58)
-#define DRA7_MAILBOX5_CLKCTRL	DRA7_CLKCTRL_INDEX(0x60)
-#define DRA7_MAILBOX6_CLKCTRL	DRA7_CLKCTRL_INDEX(0x68)
-#define DRA7_MAILBOX7_CLKCTRL	DRA7_CLKCTRL_INDEX(0x70)
-#define DRA7_MAILBOX8_CLKCTRL	DRA7_CLKCTRL_INDEX(0x78)
-#define DRA7_MAILBOX9_CLKCTRL	DRA7_CLKCTRL_INDEX(0x80)
-#define DRA7_MAILBOX10_CLKCTRL	DRA7_CLKCTRL_INDEX(0x88)
-#define DRA7_MAILBOX11_CLKCTRL	DRA7_CLKCTRL_INDEX(0x90)
-#define DRA7_MAILBOX12_CLKCTRL	DRA7_CLKCTRL_INDEX(0x98)
-#define DRA7_MAILBOX13_CLKCTRL	DRA7_CLKCTRL_INDEX(0xa0)
-
-/* l3instr clocks */
-#define DRA7_L3_MAIN_2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_L3_INSTR_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-
-/* dss clocks */
-#define DRA7_DSS_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_BB2D_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
-
-/* l3init clocks */
-#define DRA7_MMC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-#define DRA7_MMC2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
-#define DRA7_USB_OTG_SS2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x40)
-#define DRA7_USB_OTG_SS3_CLKCTRL	DRA7_CLKCTRL_INDEX(0x48)
-#define DRA7_USB_OTG_SS4_CLKCTRL	DRA7_CLKCTRL_INDEX(0x50)
-#define DRA7_SATA_CLKCTRL	DRA7_CLKCTRL_INDEX(0x88)
-#define DRA7_PCIE1_CLKCTRL	DRA7_CLKCTRL_INDEX(0xb0)
-#define DRA7_PCIE2_CLKCTRL	DRA7_CLKCTRL_INDEX(0xb8)
-#define DRA7_GMAC_CLKCTRL	DRA7_CLKCTRL_INDEX(0xd0)
-#define DRA7_OCP2SCP1_CLKCTRL	DRA7_CLKCTRL_INDEX(0xe0)
-#define DRA7_OCP2SCP3_CLKCTRL	DRA7_CLKCTRL_INDEX(0xe8)
-#define DRA7_USB_OTG_SS1_CLKCTRL	DRA7_CLKCTRL_INDEX(0xf0)
-
-/* l4per clocks */
-#define _DRA7_L4PER_CLKCTRL_OFFSET	0x0
-#define _DRA7_L4PER_CLKCTRL_INDEX(offset)	((offset) - _DRA7_L4PER_CLKCTRL_OFFSET)
-#define DRA7_L4_PER2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xc)
-#define DRA7_L4_PER3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x14)
-#define DRA7_TIMER10_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x28)
-#define DRA7_TIMER11_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x30)
-#define DRA7_TIMER2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x38)
-#define DRA7_TIMER3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x40)
-#define DRA7_TIMER4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x48)
-#define DRA7_TIMER9_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x50)
-#define DRA7_ELM_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x58)
-#define DRA7_GPIO2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x60)
-#define DRA7_GPIO3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x68)
-#define DRA7_GPIO4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x70)
-#define DRA7_GPIO5_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x78)
-#define DRA7_GPIO6_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x80)
-#define DRA7_HDQ1W_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x88)
-#define DRA7_EPWMSS1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x90)
-#define DRA7_EPWMSS2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x98)
-#define DRA7_I2C1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xa0)
-#define DRA7_I2C2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xa8)
-#define DRA7_I2C3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xb0)
-#define DRA7_I2C4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xb8)
-#define DRA7_L4_PER1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xc0)
-#define DRA7_EPWMSS0_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xc4)
-#define DRA7_TIMER13_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xc8)
-#define DRA7_TIMER14_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xd0)
-#define DRA7_TIMER15_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xd8)
-#define DRA7_MCSPI1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xf0)
-#define DRA7_MCSPI2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0xf8)
-#define DRA7_MCSPI3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x100)
-#define DRA7_MCSPI4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x108)
-#define DRA7_GPIO7_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x110)
-#define DRA7_GPIO8_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x118)
-#define DRA7_MMC3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x120)
-#define DRA7_MMC4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x128)
-#define DRA7_TIMER16_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x130)
-#define DRA7_QSPI_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x138)
-#define DRA7_UART1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x140)
-#define DRA7_UART2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x148)
-#define DRA7_UART3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x150)
-#define DRA7_UART4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x158)
-#define DRA7_MCASP2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x160)
-#define DRA7_MCASP3_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x168)
-#define DRA7_UART5_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x170)
-#define DRA7_MCASP5_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x178)
-#define DRA7_MCASP8_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x190)
-#define DRA7_MCASP4_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x198)
-#define DRA7_AES1_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1a0)
-#define DRA7_AES2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1a8)
-#define DRA7_DES_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1b0)
-#define DRA7_RNG_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1c0)
-#define DRA7_SHAM_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1c8)
-#define DRA7_UART7_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1d0)
-#define DRA7_UART8_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1e0)
-#define DRA7_UART9_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1e8)
-#define DRA7_DCAN2_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x1f0)
-#define DRA7_MCASP6_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x204)
-#define DRA7_MCASP7_CLKCTRL	_DRA7_L4PER_CLKCTRL_INDEX(0x208)
-
-/* wkupaon clocks */
-#define DRA7_L4_WKUP_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_WD_TIMER2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
-#define DRA7_GPIO1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x38)
-#define DRA7_TIMER1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x40)
-#define DRA7_TIMER12_CLKCTRL	DRA7_CLKCTRL_INDEX(0x48)
-#define DRA7_COUNTER_32K_CLKCTRL	DRA7_CLKCTRL_INDEX(0x50)
-#define DRA7_UART10_CLKCTRL	DRA7_CLKCTRL_INDEX(0x80)
-#define DRA7_DCAN1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x88)
-#define DRA7_ADC_CLKCTRL	DRA7_CLKCTRL_INDEX(0xa0)
-
-/* XXX: Compatibility part end. */
-
 /* mpu clocks */
 #define DRA7_MPU_MPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 
-- 
cgit v1.2.3


From 6a6c2389ddf74c2b204a6900745d7a77abfc22f3 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@inria.fr>
Date: Mon, 14 Mar 2022 12:53:38 +0100
Subject: clk: ti: clkctrl: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220314115354.144023-15-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/ti/clkctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c
index 864c484bde1b..170cdf9ea8f6 100644
--- a/drivers/clk/ti/clkctrl.c
+++ b/drivers/clk/ti/clkctrl.c
@@ -603,7 +603,7 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 
 	/*
 	 * The code below can be removed when all clkctrl nodes use domain
-	 * specific compatible proprerty and standard clock node naming
+	 * specific compatible property and standard clock node naming
 	 */
 	if (legacy_naming) {
 		provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFnxxx", node->parent);
-- 
cgit v1.2.3


From bb7f4b8c1e5c184d8a39c25ce40a73ef6ecba365 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@inria.fr>
Date: Mon, 14 Mar 2022 12:53:39 +0100
Subject: clk: qcom: sm6125-gcc: fix typos in comments

Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220314115354.144023-16-Julia.Lawall@inria.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/gcc-sm6125.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/qcom/gcc-sm6125.c b/drivers/clk/qcom/gcc-sm6125.c
index 431b55bb0d2f..cf3af88d4021 100644
--- a/drivers/clk/qcom/gcc-sm6125.c
+++ b/drivers/clk/qcom/gcc-sm6125.c
@@ -4151,7 +4151,7 @@ static int gcc_sm6125_probe(struct platform_device *pdev)
 
 	/*
 	 * Enable DUAL_EDGE mode for MCLK RCGs
-	 * This is requierd to enable MND divider mode
+	 * This is required to enable MND divider mode
 	 */
 	regmap_update_bits(regmap, 0x51004, 0x3000, 0x2000);
 	regmap_update_bits(regmap, 0x51020, 0x3000, 0x2000);
-- 
cgit v1.2.3


From d583804c97c5ae7a7eba9c44982adcb106c2d160 Mon Sep 17 00:00:00 2001
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Date: Tue, 22 Feb 2022 18:39:02 +0530
Subject: clk: zynq: trivial warning fix

Fix the below warning

WARNING: Missing a blank line after declarations
+               int enable = !!(fclk_enable & BIT(i - fclk0));
+               zynq_clk_register_fclk(i, clk_output_name[i],

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-2-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/zynq/clkc.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/clk')

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 204b83d911b9..434511dcf5cb 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -349,6 +349,7 @@ static void __init zynq_clk_setup(struct device_node *np)
 	/* Peripheral clocks */
 	for (i = fclk0; i <= fclk3; i++) {
 		int enable = !!(fclk_enable & BIT(i - fclk0));
+
 		zynq_clk_register_fclk(i, clk_output_name[i],
 				SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0),
 				periph_parents, enable);
-- 
cgit v1.2.3


From a6aa462c3efc144808b0cf8a0fe993d4fe2c079a Mon Sep 17 00:00:00 2001
From: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Date: Tue, 22 Feb 2022 18:39:03 +0530
Subject: clk: zynq: Update the parameters to zynq_clk_register_periph_clk

In case there are only one gate or the two_gate is 0 the clk1 clock
passed is not used. We are passing 0 which is arm_pll.
Pass a invalid clock instead.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/zynq/clkc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/clk')

diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c
index 434511dcf5cb..7bdeaff2bfd6 100644
--- a/drivers/clk/zynq/clkc.c
+++ b/drivers/clk/zynq/clkc.c
@@ -355,14 +355,14 @@ static void __init zynq_clk_setup(struct device_node *np)
 				periph_parents, enable);
 	}
 
-	zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL,
-			SLCR_LQSPI_CLK_CTRL, periph_parents, 0);
+	zynq_clk_register_periph_clk(lqspi, clk_max, clk_output_name[lqspi], NULL,
+				     SLCR_LQSPI_CLK_CTRL, periph_parents, 0);
 
-	zynq_clk_register_periph_clk(smc, 0, clk_output_name[smc], NULL,
-			SLCR_SMC_CLK_CTRL, periph_parents, 0);
+	zynq_clk_register_periph_clk(smc, clk_max, clk_output_name[smc], NULL,
+				     SLCR_SMC_CLK_CTRL, periph_parents, 0);
 
-	zynq_clk_register_periph_clk(pcap, 0, clk_output_name[pcap], NULL,
-			SLCR_PCAP_CLK_CTRL, periph_parents, 0);
+	zynq_clk_register_periph_clk(pcap, clk_max, clk_output_name[pcap], NULL,
+				     SLCR_PCAP_CLK_CTRL, periph_parents, 0);
 
 	zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0],
 			clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL,
-- 
cgit v1.2.3