From daea72831d3a18c561f028258ca5fb65ac3c8947 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 6 Jul 2015 15:39:19 +0530 Subject: clockevents/drivers/timer-sp804: Migrate to new 'set-state' interface Migrate timer-sp driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. There are few more changes worth noticing: - The clockevent device was disabled by writing: 'TIMER_CTRL_32BIT | TIMER_CTRL_IE' to ctrl register earlier. i.e. by un-setting the TIMER_CTRL_ENABLE bit. Its done by writing zero now and should have the same effect. - For shutdown and resume we were writing the same value twice to the register (to disable the timer), which is fixed now. - Switching to oneshot mode was divided into two parts earlier: - Firstly set_mode() was writing: 'TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ONESHOT' to ctrl register (device not enabled yet) - Then sp804_set_next_event() was enabling the device by writing 'readl(ctrl) | TIMER_CTRL_ENABLE' to the ctrl register. This was unnecessarily complicated. - Change this to: Stop device on set_state_oneshot and configure it in sp804_set_next_event(). Cc: Daniel Lezcano Cc: Russell King Cc: Sudeep Holla Cc: Arnd Bergmann Cc: Catalin Marinas Cc: Olof Johansson Signed-off-by: Viresh Kumar Signed-off-by: Daniel Lezcano --- drivers/clocksource/timer-sp804.c | 54 +++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 27 deletions(-) (limited to 'drivers/clocksource/timer-sp804.c') diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c index ca02503f17d1..5f45b9adef60 100644 --- a/drivers/clocksource/timer-sp804.c +++ b/drivers/clocksource/timer-sp804.c @@ -133,50 +133,50 @@ static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static void sp804_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) +static inline void timer_shutdown(struct clock_event_device *evt) { - unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE; + writel(0, clkevt_base + TIMER_CTRL); +} - writel(ctrl, clkevt_base + TIMER_CTRL); +static int sp804_shutdown(struct clock_event_device *evt) +{ + timer_shutdown(evt); + return 0; +} - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(clkevt_reload, clkevt_base + TIMER_LOAD); - ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl |= TIMER_CTRL_ONESHOT; - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - break; - } +static int sp804_set_periodic(struct clock_event_device *evt) +{ + unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | + TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + timer_shutdown(evt); + writel(clkevt_reload, clkevt_base + TIMER_LOAD); writel(ctrl, clkevt_base + TIMER_CTRL); + return 0; } static int sp804_set_next_event(unsigned long next, struct clock_event_device *evt) { - unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE | + TIMER_CTRL_ONESHOT | TIMER_CTRL_ENABLE; writel(next, clkevt_base + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(ctrl, clkevt_base + TIMER_CTRL); return 0; } static struct clock_event_device sp804_clockevent = { - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_DYNIRQ, - .set_mode = sp804_set_mode, - .set_next_event = sp804_set_next_event, - .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_DYNIRQ, + .set_state_shutdown = sp804_shutdown, + .set_state_periodic = sp804_set_periodic, + .set_state_oneshot = sp804_shutdown, + .tick_resume = sp804_shutdown, + .set_next_event = sp804_set_next_event, + .rating = 300, }; static struct irqaction sp804_timer_irq = { -- cgit v1.2.3