From dd22b34fb53cb04b13b2f5eee5c9200bb091fc88 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Sat, 6 Apr 2024 15:01:09 +0200 Subject: firmware: qcom: uefisecapp: Fix memory related IO errors and crashes commit ed09f81eeaa8f9265e1787282cb283f10285c259 upstream. It turns out that while the QSEECOM APP_SEND command has specific fields for request and response buffers, uefisecapp expects them both to be in a single memory region. Failure to adhere to this has (so far) resulted in either no response being written to the response buffer (causing an EIO to be emitted down the line), the SCM call to fail with EINVAL (i.e., directly from TZ/firmware), or the device to be hard-reset. While this issue can be triggered deterministically, in the current form it seems to happen rather sporadically (which is why it has gone unnoticed during earlier testing). This is likely due to the two kzalloc() calls (for request and response) being directly after each other. Which means that those likely return consecutive regions most of the time, especially when not much else is going on in the system. Fix this by allocating a single memory region for both request and response buffers, properly aligning both structs inside it. This unfortunately also means that the qcom_scm_qseecom_app_send() interface needs to be restructured, as it should no longer map the DMA regions separately. Therefore, move the responsibility of DMA allocation (or mapping) to the caller. Fixes: 759e7a2b62eb ("firmware: Add support for Qualcomm UEFI Secure Application") Cc: stable@vger.kernel.org # 6.7 Tested-by: Johan Hovold Reviewed-by: Johan Hovold Signed-off-by: Maximilian Luz Tested-by: Konrad Dybcio # X13s Link: https://lore.kernel.org/r/20240406130125.1047436-1-luzmaximilian@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/qcom/qcom_scm.c | 37 ++++++------------------------------- 1 file changed, 6 insertions(+), 31 deletions(-) (limited to 'drivers/firmware/qcom/qcom_scm.c') diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c index 520de9b5633a..90283f160a22 100644 --- a/drivers/firmware/qcom/qcom_scm.c +++ b/drivers/firmware/qcom/qcom_scm.c @@ -1576,9 +1576,9 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id); /** * qcom_scm_qseecom_app_send() - Send to and receive data from a given QSEE app. * @app_id: The ID of the target app. - * @req: Request buffer sent to the app (must be DMA-mappable). + * @req: DMA address of the request buffer sent to the app. * @req_size: Size of the request buffer. - * @rsp: Response buffer, written to by the app (must be DMA-mappable). + * @rsp: DMA address of the response buffer, written to by the app. * @rsp_size: Size of the response buffer. * * Sends a request to the QSEE app associated with the given ID and read back @@ -1589,33 +1589,13 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id); * * Return: Zero on success, nonzero on failure. */ -int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, void *rsp, - size_t rsp_size) +int qcom_scm_qseecom_app_send(u32 app_id, dma_addr_t req, size_t req_size, + dma_addr_t rsp, size_t rsp_size) { struct qcom_scm_qseecom_resp res = {}; struct qcom_scm_desc desc = {}; - dma_addr_t req_phys; - dma_addr_t rsp_phys; int status; - /* Map request buffer */ - req_phys = dma_map_single(__scm->dev, req, req_size, DMA_TO_DEVICE); - status = dma_mapping_error(__scm->dev, req_phys); - if (status) { - dev_err(__scm->dev, "qseecom: failed to map request buffer\n"); - return status; - } - - /* Map response buffer */ - rsp_phys = dma_map_single(__scm->dev, rsp, rsp_size, DMA_FROM_DEVICE); - status = dma_mapping_error(__scm->dev, rsp_phys); - if (status) { - dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE); - dev_err(__scm->dev, "qseecom: failed to map response buffer\n"); - return status; - } - - /* Set up SCM call data */ desc.owner = QSEECOM_TZ_OWNER_TZ_APPS; desc.svc = QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER; desc.cmd = QSEECOM_TZ_CMD_APP_SEND; @@ -1623,18 +1603,13 @@ int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, void *rsp, QCOM_SCM_RW, QCOM_SCM_VAL, QCOM_SCM_RW, QCOM_SCM_VAL); desc.args[0] = app_id; - desc.args[1] = req_phys; + desc.args[1] = req; desc.args[2] = req_size; - desc.args[3] = rsp_phys; + desc.args[3] = rsp; desc.args[4] = rsp_size; - /* Perform call */ status = qcom_scm_qseecom_call(&desc, &res); - /* Unmap buffers */ - dma_unmap_single(__scm->dev, rsp_phys, rsp_size, DMA_FROM_DEVICE); - dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE); - if (status) return status; -- cgit v1.2.3