From 8a6483ac634acda3f599f50082c652d2d37199c7 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 9 Dec 2019 10:27:07 +0200 Subject: drm/bridge: tc358767: fix poll timeouts Link training fails with: Link training timeout waiting for LT_LOOPDONE! main link enable error: -110 This is caused by too tight timeouts, which were changed recently in aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()"). With a quick glance, the commit does not change the timeouts. However, the method of delaying/sleeping is different, and as the timeout in the previous implementation was not explicit, the new version in practice has much tighter timeout. The same change was made to other parts in the driver, but the link training timeout is the only one I have seen causing issues. Nevertheless, 1 us sleep is not very sane, and the timeouts look pretty tight, so lets fix all the timeouts. One exception was the aux busy poll, where the poll sleep was much longer than necessary (or optimal). I measured the times on my setup, and now the sleep times are set to such values that they result in multiple loops, but not too many (say, 5-10 loops). The timeouts were all increased to 100ms, which should be more than enough for all of these, but in case of bad errors, shouldn't stop the driver as multi-second timeouts could do. Signed-off-by: Tomi Valkeinen Fixes: aa92213f388b ("drm/bridge: tc358767: Simplify polling in tc_link_training()") Tested-by: Andrey Smirnov Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20191209082707.24531-1-tomi.valkeinen@ti.com --- drivers/gpu/drm/bridge/tc358767.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm/bridge') diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 8029478ffebb..b0b0ccbb059d 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -297,7 +297,7 @@ static inline int tc_poll_timeout(struct tc_data *tc, unsigned int addr, static int tc_aux_wait_busy(struct tc_data *tc) { - return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0, 1000, 100000); + return tc_poll_timeout(tc, DP0_AUXSTATUS, AUX_BUSY, 0, 100, 100000); } static int tc_aux_write_data(struct tc_data *tc, const void *data, @@ -640,7 +640,7 @@ static int tc_aux_link_setup(struct tc_data *tc) if (ret) goto err; - ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000); + ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 100, 100000); if (ret == -ETIMEDOUT) { dev_err(tc->dev, "Timeout waiting for PHY to become ready"); return ret; @@ -876,7 +876,7 @@ static int tc_wait_link_training(struct tc_data *tc) int ret; ret = tc_poll_timeout(tc, DP0_LTSTAT, LT_LOOPDONE, - LT_LOOPDONE, 1, 1000); + LT_LOOPDONE, 500, 100000); if (ret) { dev_err(tc->dev, "Link training timeout waiting for LT_LOOPDONE!\n"); return ret; @@ -949,7 +949,7 @@ static int tc_main_link_enable(struct tc_data *tc) dp_phy_ctrl &= ~(DP_PHY_RST | PHY_M1_RST | PHY_M0_RST); ret = regmap_write(tc->regmap, DP_PHY_CTRL, dp_phy_ctrl); - ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 1, 1000); + ret = tc_poll_timeout(tc, DP_PHY_CTRL, PHY_RDY, PHY_RDY, 500, 100000); if (ret) { dev_err(dev, "timeout waiting for phy become ready"); return ret; -- cgit v1.2.3 From 48bc281e4bf049abd3bb98371209315651bf4a14 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 15 Jan 2020 13:56:53 +0100 Subject: drm/bridge: ti-tfp410: Update drm_connector_init_with_ddc() error message The code was changed to call drm_connector_init_with_ddc() instead of drm_connector_init(), but the corresponding error message was not updated. Fixes: cfb444552926989f ("drm/bridge: ti-tfp410: Provide ddc symlink in connector sysfs directory") Signed-off-by: Geert Uytterhoeven Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20200115125653.5519-1-geert+renesas@glider.be --- drivers/gpu/drm/bridge/ti-tfp410.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/bridge') diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c index 6f6d6d1e60ae..f195a4732e0b 100644 --- a/drivers/gpu/drm/bridge/ti-tfp410.c +++ b/drivers/gpu/drm/bridge/ti-tfp410.c @@ -140,7 +140,8 @@ static int tfp410_attach(struct drm_bridge *bridge) dvi->connector_type, dvi->ddc); if (ret) { - dev_err(dvi->dev, "drm_connector_init() failed: %d\n", ret); + dev_err(dvi->dev, "drm_connector_init_with_ddc() failed: %d\n", + ret); return ret; } -- cgit v1.2.3 From 2be30d34a387b8d97cc1b4be1223bfe0b75a0812 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 22 Feb 2020 00:51:27 +0800 Subject: drm/bridge: analogix-anx6345: fix set of link bandwidth Current code tries to store the link rate (in bps, which is a big number) in a u8, which surely overflow. Then it's converted back to bandwidth code (which is thus 0) and written to the chip. The code sometimes works because the chip will automatically fallback to the lowest possible DP link rate (1.62Gbps) when get the invalid value. However, on the eDP panel of Olimex TERES-I, which wants 2.7Gbps link, it failed. As we had already read the link bandwidth as bandwidth code in earlier code (to check whether it is supported), use it when setting bandwidth, instead of converting it to link rate and then converting back. Fixes: e1cff82c1097 ("drm/bridge: fix anx6345 compilation for v5.5") Signed-off-by: Icenowy Zheng Reviewed-by: Torsten Duwe Cc: Maxime Ripard Cc: Torsten Duwe Cc: Sam Ravnborg Cc: Linus Walleij Cc: Thomas Zimmermann Cc: Icenowy Zheng Cc: Stephen Rothwell Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20200221165127.813325-1-icenowy@aosc.io --- drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/gpu/drm/bridge') diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c index 56f55c53abfd..2dfa2fd2a23b 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c @@ -210,8 +210,7 @@ static int anx6345_dp_link_training(struct anx6345 *anx6345) if (err) return err; - dpcd[0] = drm_dp_max_link_rate(anx6345->dpcd); - dpcd[0] = drm_dp_link_rate_to_bw_code(dpcd[0]); + dpcd[0] = dp_bw; err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_MAIN_LINK_BW_SET_REG, dpcd[0]); if (err) -- cgit v1.2.3