From cb09bbcc429a290d01ebf23b9f0193dee0da6779 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Thu, 25 Jun 2015 11:15:11 -0700 Subject: vmwgfx: Update device headers for command buffers. Signed-off-by: Thomas Hellstrom Reviewed-by: Sinclair Yeh --- drivers/gpu/drm/vmwgfx/svga3d_reg.h | 2 - drivers/gpu/drm/vmwgfx/svga_reg.h | 187 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/vmwgfx/svga_types.h | 3 + 3 files changed, 190 insertions(+), 2 deletions(-) (limited to 'drivers/gpu') diff --git a/drivers/gpu/drm/vmwgfx/svga3d_reg.h b/drivers/gpu/drm/vmwgfx/svga3d_reg.h index f58dc7dd15c5..e50d20c9cfe8 100644 --- a/drivers/gpu/drm/vmwgfx/svga3d_reg.h +++ b/drivers/gpu/drm/vmwgfx/svga3d_reg.h @@ -1928,8 +1928,6 @@ struct { * Guest-backed surface definitions. */ -typedef uint32 SVGAMobId; - typedef enum SVGAMobFormat { SVGA3D_MOBFMT_INVALID = SVGA3D_INVALID_ID, SVGA3D_MOBFMT_PTDEPTH_0 = 0, diff --git a/drivers/gpu/drm/vmwgfx/svga_reg.h b/drivers/gpu/drm/vmwgfx/svga_reg.h index e4259c2c1acc..3763d5bac47b 100644 --- a/drivers/gpu/drm/vmwgfx/svga_reg.h +++ b/drivers/gpu/drm/vmwgfx/svga_reg.h @@ -106,6 +106,8 @@ #define SVGA_IRQFLAG_ANY_FENCE 0x1 /* Any fence was passed */ #define SVGA_IRQFLAG_FIFO_PROGRESS 0x2 /* Made forward progress in the FIFO */ #define SVGA_IRQFLAG_FENCE_GOAL 0x4 /* SVGA_FIFO_FENCE_GOAL reached */ +#define SVGA_IRQFLAG_COMMAND_BUFFER 0x8 /* Command buffer completed */ +#define SVGA_IRQFLAG_ERROR 0x10 /* Error while processing commands */ /* * Registers @@ -299,6 +301,190 @@ struct SVGAGuestPtr { uint32 offset; } SVGAGuestPtr; +/* + * Register based command buffers -- + * + * Provide an SVGA device interface that allows the guest to submit + * command buffers to the SVGA device through an SVGA device register. + * The metadata for each command buffer is contained in the + * SVGACBHeader structure along with the return status codes. + * + * The SVGA device supports command buffers if + * SVGA_CAP_COMMAND_BUFFERS is set in the device caps register. The + * fifo must be enabled for command buffers to be submitted. + * + * Command buffers are submitted when the guest writing the 64 byte + * aligned physical address into the SVGA_REG_COMMAND_LOW and + * SVGA_REG_COMMAND_HIGH. SVGA_REG_COMMAND_HIGH contains the upper 32 + * bits of the physical address. SVGA_REG_COMMAND_LOW contains the + * lower 32 bits of the physical address, since the command buffer + * headers are required to be 64 byte aligned the lower 6 bits are + * used for the SVGACBContext value. Writing to SVGA_REG_COMMAND_LOW + * submits the command buffer to the device and queues it for + * execution. The SVGA device supports at least + * SVGA_CB_MAX_QUEUED_PER_CONTEXT command buffers that can be queued + * per context and if that limit is reached the device will write the + * status SVGA_CB_STATUS_QUEUE_FULL to the status value of the command + * buffer header synchronously and not raise any IRQs. + * + * It is invalid to submit a command buffer without a valid physical + * address and results are undefined. + * + * The device guarantees that command buffers of size SVGA_CB_MAX_SIZE + * will be supported. If a larger command buffer is submitted results + * are unspecified and the device will either complete the command + * buffer or return an error. + * + * The device guarantees that any individual command in a command + * buffer can be up to SVGA_CB_MAX_COMMAND_SIZE in size which is + * enough to fit a 64x64 color-cursor definition. If the command is + * too large the device is allowed to process the command or return an + * error. + * + * The device context is a special SVGACBContext that allows for + * synchronous register like accesses with the flexibility of + * commands. There is a different command set defined by + * SVGADeviceContextCmdId. The commands in each command buffer is not + * allowed to straddle physical pages. + * + * The offset field which is available starting with the + * SVGA_CAP_CMD_BUFFERS_2 cap bit can be set by the guest to bias the + * start of command processing into the buffer. If an error is + * encountered the errorOffset will still be relative to the specific + * PA, not biased by the offset. When the command buffer is finished + * the guest should not read the offset field as there is no guarantee + * what it will set to. + */ + +#define SVGA_CB_MAX_SIZE (512 * 1024) // 512 KB +#define SVGA_CB_MAX_QUEUED_PER_CONTEXT 32 +#define SVGA_CB_MAX_COMMAND_SIZE (32 * 1024) // 32 KB + +#define SVGA_CB_CONTEXT_MASK 0x3f +typedef enum { + SVGA_CB_CONTEXT_DEVICE = 0x3f, + SVGA_CB_CONTEXT_0 = 0x0, + SVGA_CB_CONTEXT_MAX = 0x1, +} SVGACBContext; + + +typedef enum { + /* + * The guest is supposed to write SVGA_CB_STATUS_NONE to the status + * field before submitting the command buffer header, the host will + * change the value when it is done with the command buffer. + */ + SVGA_CB_STATUS_NONE = 0, + + /* + * Written by the host when a command buffer completes successfully. + * The device raises an IRQ with SVGA_IRQFLAG_COMMAND_BUFFER unless + * the SVGA_CB_FLAG_NO_IRQ flag is set. + */ + SVGA_CB_STATUS_COMPLETED = 1, + + /* + * Written by the host synchronously with the command buffer + * submission to indicate the command buffer was not submitted. No + * IRQ is raised. + */ + SVGA_CB_STATUS_QUEUE_FULL = 2, + + /* + * Written by the host when an error was detected parsing a command + * in the command buffer, errorOffset is written to contain the + * offset to the first byte of the failing command. The device + * raises the IRQ with both SVGA_IRQFLAG_ERROR and + * SVGA_IRQFLAG_COMMAND_BUFFER. Some of the commands may have been + * processed. + */ + SVGA_CB_STATUS_COMMAND_ERROR = 3, + + /* + * Written by the host if there is an error parsing the command + * buffer header. The device raises the IRQ with both + * SVGA_IRQFLAG_ERROR and SVGA_IRQFLAG_COMMAND_BUFFER. The device + * did not processes any of the command buffer. + */ + SVGA_CB_STATUS_CB_HEADER_ERROR = 4, + + /* + * Written by the host if the guest requested the host to preempt + * the command buffer. The device will not raise any IRQs and the + * command buffer was not processed. + */ + SVGA_CB_STATUS_PREEMPTED = 5, + + /* + * Written by the host synchronously with the command buffer + * submission to indicate the the command buffer was not submitted + * due to an error. No IRQ is raised. + */ + SVGA_CB_STATUS_SUBMISSION_ERROR = 6, +} SVGACBStatus; + +typedef enum { + SVGA_CB_FLAG_NONE = 0, + SVGA_CB_FLAG_NO_IRQ = 1 << 0, + SVGA_CB_FLAG_DX_CONTEXT = 1 << 1, + SVGA_CB_FLAG_MOB = 1 << 2, +} SVGACBFlags; + +typedef +struct { + volatile SVGACBStatus status; /* Modified by device. */ + volatile uint32 errorOffset; /* Modified by device. */ + uint64 id; + SVGACBFlags flags; + uint32 length; + union { + PA pa; + struct { + SVGAMobId mobid; + uint32 mobOffset; + } mob; + } ptr; + uint32 offset; /* Valid if CMD_BUFFERS_2 cap set, must be zero otherwise, + * modified by device. + */ + uint32 dxContext; /* Valid if DX_CONTEXT flag set, must be zero otherwise */ + uint32 mustBeZero[6]; +} +__attribute__((__packed__)) +SVGACBHeader; + +typedef enum { + SVGA_DC_CMD_NOP = 0, + SVGA_DC_CMD_START_STOP_CONTEXT = 1, + SVGA_DC_CMD_PREEMPT = 2, + SVGA_DC_CMD_MAX = 3, +} SVGADeviceContextCmdId; + + +typedef struct { + uint32 enable; + SVGACBContext context; +} SVGADCCmdStartStop; + +/* + * SVGADCCmdPreempt -- + * + * This command allows the guest to request that all command buffers + * on the specified context be preempted that can be. After execution + * of this command all command buffers that were preempted will + * already have SVGA_CB_STATUS_PREEMPTED written into the status + * field. The device might still be processing a command buffer, + * assuming execution of it started before the preemption request was + * received. Specifying the ignoreIDZero flag to TRUE will cause the + * device to not preempt command buffers with the id field in the + * command buffer header set to zero. + */ + +typedef struct { + SVGACBContext context; + uint32 ignoreIDZero; +} SVGADCCmdPreempt; + /* * SVGAGMRImageFormat -- @@ -444,6 +630,7 @@ struct SVGASignedPoint { #define SVGA_CAP_DEAD1 0x02000000 #define SVGA_CAP_CMD_BUFFERS_2 0x04000000 #define SVGA_CAP_GBOBJECTS 0x08000000 +#define SVGA_CAP_CMD_BUFFERS_3 0x10000000 /* * FIFO register indices. diff --git a/drivers/gpu/drm/vmwgfx/svga_types.h b/drivers/gpu/drm/vmwgfx/svga_types.h index 55836dedcfc2..1186898208ed 100644 --- a/drivers/gpu/drm/vmwgfx/svga_types.h +++ b/drivers/gpu/drm/vmwgfx/svga_types.h @@ -40,6 +40,9 @@ typedef uint16_t uint16; typedef uint32_t uint32; typedef uint8_t uint8; typedef int32_t int32; +typedef uint64_t uint64; typedef bool Bool; +typedef uint64 PA; +typedef uint32 SVGAMobId; #endif -- cgit v1.2.3