From 73cc584cfced260133cfc635f9921d66da676749 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 20 Jan 2021 14:28:34 +0100 Subject: i2c: remove zte zx bus driver The zte zx platform is getting removed, so this driver is no longer needed. Signed-off-by: Arnd Bergmann Signed-off-by: Wolfram Sang --- drivers/i2c/busses/Kconfig | 9 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-zx2967.c | 602 ---------------------------------------- 3 files changed, 612 deletions(-) delete mode 100644 drivers/i2c/busses/i2c-zx2967.c (limited to 'drivers/i2c') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 4fe74259d44c..2a89d0b061ee 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1370,15 +1370,6 @@ config I2C_OPAL This driver can also be built as a module. If so, the module will be called as i2c-opal. -config I2C_ZX2967 - tristate "ZTE ZX2967 I2C support" - depends on ARCH_ZX - default y - help - Selecting this option will add ZX2967 I2C driver. - This driver can also be built as a module. If so, the module will be - called i2c-zx2967. - config I2C_FSI tristate "FSI I2C driver" depends on FSI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 572d5fcc6016..615f35e3e31f 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -119,7 +119,6 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o -obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c deleted file mode 100644 index 8db9519695a6..000000000000 --- a/drivers/i2c/busses/i2c-zx2967.c +++ /dev/null @@ -1,602 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2017 Sanechips Technology Co., Ltd. - * Copyright 2017 Linaro Ltd. - * - * Author: Baoyou Xie - */ - -#include -#include -#include -#include -#include -#include - -#define REG_CMD 0x04 -#define REG_DEVADDR_H 0x0C -#define REG_DEVADDR_L 0x10 -#define REG_CLK_DIV_FS 0x14 -#define REG_CLK_DIV_HS 0x18 -#define REG_WRCONF 0x1C -#define REG_RDCONF 0x20 -#define REG_DATA 0x24 -#define REG_STAT 0x28 - -#define I2C_STOP 0 -#define I2C_MASTER BIT(0) -#define I2C_ADDR_MODE_TEN BIT(1) -#define I2C_IRQ_MSK_ENABLE BIT(3) -#define I2C_RW_READ BIT(4) -#define I2C_CMB_RW_EN BIT(5) -#define I2C_START BIT(6) - -#define I2C_ADDR_LOW_MASK GENMASK(6, 0) -#define I2C_ADDR_LOW_SHIFT 0 -#define I2C_ADDR_HI_MASK GENMASK(2, 0) -#define I2C_ADDR_HI_SHIFT 7 - -#define I2C_WFIFO_RESET BIT(7) -#define I2C_RFIFO_RESET BIT(7) - -#define I2C_IRQ_ACK_CLEAR BIT(7) -#define I2C_INT_MASK GENMASK(6, 0) - -#define I2C_TRANS_DONE BIT(0) -#define I2C_SR_EDEVICE BIT(1) -#define I2C_SR_EDATA BIT(2) - -#define I2C_FIFO_MAX 16 - -#define I2C_TIMEOUT msecs_to_jiffies(1000) - -#define DEV(i2c) ((i2c)->adap.dev.parent) - -struct zx2967_i2c { - struct i2c_adapter adap; - struct clk *clk; - struct completion complete; - u32 clk_freq; - void __iomem *reg_base; - size_t residue; - int irq; - int msg_rd; - u8 *cur_trans; - u8 access_cnt; - int error; -}; - -static void zx2967_i2c_writel(struct zx2967_i2c *i2c, - u32 val, unsigned long reg) -{ - writel_relaxed(val, i2c->reg_base + reg); -} - -static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg) -{ - return readl_relaxed(i2c->reg_base + reg); -} - -static void zx2967_i2c_writesb(struct zx2967_i2c *i2c, - void *data, unsigned long reg, int len) -{ - writesb(i2c->reg_base + reg, data, len); -} - -static void zx2967_i2c_readsb(struct zx2967_i2c *i2c, - void *data, unsigned long reg, int len) -{ - readsb(i2c->reg_base + reg, data, len); -} - -static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c) -{ - u32 status; - u32 ctl; - - status = zx2967_i2c_readl(i2c, REG_STAT); - status |= I2C_IRQ_ACK_CLEAR; - zx2967_i2c_writel(i2c, status, REG_STAT); - - ctl = zx2967_i2c_readl(i2c, REG_CMD); - if (i2c->msg_rd) - ctl |= I2C_RW_READ; - else - ctl &= ~I2C_RW_READ; - ctl &= ~I2C_CMB_RW_EN; - ctl |= I2C_START; - zx2967_i2c_writel(i2c, ctl, REG_CMD); -} - -static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c) -{ - u32 offset; - u32 val; - - if (i2c->msg_rd) { - offset = REG_RDCONF; - val = I2C_RFIFO_RESET; - } else { - offset = REG_WRCONF; - val = I2C_WFIFO_RESET; - } - - val |= zx2967_i2c_readl(i2c, offset); - zx2967_i2c_writel(i2c, val, offset); -} - -static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size) -{ - u8 val[I2C_FIFO_MAX] = {0}; - int i; - - if (size > I2C_FIFO_MAX) { - dev_err(DEV(i2c), "fifo size %d over the max value %d\n", - size, I2C_FIFO_MAX); - return -EINVAL; - } - - zx2967_i2c_readsb(i2c, val, REG_DATA, size); - for (i = 0; i < size; i++) { - *i2c->cur_trans++ = val[i]; - i2c->residue--; - } - - barrier(); - - return 0; -} - -static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c) -{ - size_t residue = i2c->residue; - u8 *buf = i2c->cur_trans; - - if (residue == 0) { - dev_err(DEV(i2c), "residue is %d\n", (int)residue); - return -EINVAL; - } - - if (residue <= I2C_FIFO_MAX) { - zx2967_i2c_writesb(i2c, buf, REG_DATA, residue); - - /* Again update before writing to FIFO to make sure isr sees. */ - i2c->residue = 0; - i2c->cur_trans = NULL; - } else { - zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX); - i2c->residue -= I2C_FIFO_MAX; - i2c->cur_trans += I2C_FIFO_MAX; - } - - barrier(); - - return 0; -} - -static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c) -{ - u32 val; - u32 clk_div; - - val = I2C_MASTER | I2C_IRQ_MSK_ENABLE; - zx2967_i2c_writel(i2c, val, REG_CMD); - - clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1; - zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS); - zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS); - - zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF); - zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF); - zx2967_i2c_writel(i2c, 1, REG_RDCONF); - - zx2967_i2c_flush_fifos(i2c); - - return 0; -} - -static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c) -{ - u32 status; - - status = zx2967_i2c_readl(i2c, REG_STAT); - status |= I2C_IRQ_ACK_CLEAR; - zx2967_i2c_writel(i2c, status, REG_STAT); -} - -static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id) -{ - u32 status; - struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id; - - status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK; - zx2967_i2c_isr_clr(i2c); - - if (status & I2C_SR_EDEVICE) - i2c->error = -ENXIO; - else if (status & I2C_SR_EDATA) - i2c->error = -EIO; - else if (status & I2C_TRANS_DONE) - i2c->error = 0; - else - goto done; - - complete(&i2c->complete); -done: - return IRQ_HANDLED; -} - -static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr) -{ - u16 val; - - val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK; - zx2967_i2c_writel(i2c, val, REG_DEVADDR_L); - - val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK; - zx2967_i2c_writel(i2c, val, REG_DEVADDR_H); - if (val) - val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN; - else - val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN; - zx2967_i2c_writel(i2c, val, REG_CMD); -} - -static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes) -{ - unsigned long time_left; - int rd = i2c->msg_rd; - int ret; - - reinit_completion(&i2c->complete); - - if (rd) { - zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF); - } else { - ret = zx2967_i2c_fill_tx_fifo(i2c); - if (ret) - return ret; - } - - zx2967_i2c_start_ctrl(i2c); - - time_left = wait_for_completion_timeout(&i2c->complete, - I2C_TIMEOUT); - if (time_left == 0) - return -ETIMEDOUT; - - if (i2c->error) - return i2c->error; - - return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0; -} - -static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c, - struct i2c_msg *msg) -{ - int ret; - int i; - - zx2967_i2c_flush_fifos(i2c); - - i2c->cur_trans = msg->buf; - i2c->residue = msg->len; - i2c->access_cnt = msg->len / I2C_FIFO_MAX; - i2c->msg_rd = msg->flags & I2C_M_RD; - - for (i = 0; i < i2c->access_cnt; i++) { - ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX); - if (ret) - return ret; - } - - if (i2c->residue > 0) { - ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue); - if (ret) - return ret; - } - - i2c->residue = 0; - i2c->access_cnt = 0; - - return 0; -} - -static int zx2967_i2c_xfer(struct i2c_adapter *adap, - struct i2c_msg *msgs, int num) -{ - struct zx2967_i2c *i2c = i2c_get_adapdata(adap); - int ret; - int i; - - zx2967_set_addr(i2c, msgs->addr); - - for (i = 0; i < num; i++) { - ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]); - if (ret) - return ret; - } - - return num; -} - -static void -zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr, - char read_write, u8 command, int size, - union i2c_smbus_data *data) -{ - u32 val; - - val = zx2967_i2c_readl(i2c, REG_RDCONF); - val |= I2C_RFIFO_RESET; - zx2967_i2c_writel(i2c, val, REG_RDCONF); - zx2967_set_addr(i2c, addr); - val = zx2967_i2c_readl(i2c, REG_CMD); - val &= ~I2C_RW_READ; - zx2967_i2c_writel(i2c, val, REG_CMD); - - switch (size) { - case I2C_SMBUS_BYTE: - zx2967_i2c_writel(i2c, command, REG_DATA); - break; - case I2C_SMBUS_BYTE_DATA: - zx2967_i2c_writel(i2c, command, REG_DATA); - if (read_write == I2C_SMBUS_WRITE) - zx2967_i2c_writel(i2c, data->byte, REG_DATA); - break; - case I2C_SMBUS_WORD_DATA: - zx2967_i2c_writel(i2c, command, REG_DATA); - if (read_write == I2C_SMBUS_WRITE) { - zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA); - zx2967_i2c_writel(i2c, (data->word & 0xff), - REG_DATA); - } - break; - } -} - -static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size, - union i2c_smbus_data *data) -{ - unsigned long time_left; - u8 buf[2]; - u32 val; - - reinit_completion(&i2c->complete); - - val = zx2967_i2c_readl(i2c, REG_CMD); - val |= I2C_CMB_RW_EN; - zx2967_i2c_writel(i2c, val, REG_CMD); - - val = zx2967_i2c_readl(i2c, REG_CMD); - val |= I2C_START; - zx2967_i2c_writel(i2c, val, REG_CMD); - - time_left = wait_for_completion_timeout(&i2c->complete, - I2C_TIMEOUT); - if (time_left == 0) - return -ETIMEDOUT; - - if (i2c->error) - return i2c->error; - - switch (size) { - case I2C_SMBUS_BYTE: - case I2C_SMBUS_BYTE_DATA: - val = zx2967_i2c_readl(i2c, REG_DATA); - data->byte = val; - break; - case I2C_SMBUS_WORD_DATA: - case I2C_SMBUS_PROC_CALL: - buf[0] = zx2967_i2c_readl(i2c, REG_DATA); - buf[1] = zx2967_i2c_readl(i2c, REG_DATA); - data->word = (buf[0] << 8) | buf[1]; - break; - default: - return -EOPNOTSUPP; - } - - return 0; -} - -static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c) -{ - unsigned long time_left; - u32 val; - - reinit_completion(&i2c->complete); - val = zx2967_i2c_readl(i2c, REG_CMD); - val |= I2C_START; - zx2967_i2c_writel(i2c, val, REG_CMD); - - time_left = wait_for_completion_timeout(&i2c->complete, - I2C_TIMEOUT); - if (time_left == 0) - return -ETIMEDOUT; - - if (i2c->error) - return i2c->error; - - return 0; -} - -static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data *data) -{ - struct zx2967_i2c *i2c = i2c_get_adapdata(adap); - - if (size == I2C_SMBUS_QUICK) - read_write = I2C_SMBUS_WRITE; - - switch (size) { - case I2C_SMBUS_QUICK: - case I2C_SMBUS_BYTE: - case I2C_SMBUS_BYTE_DATA: - case I2C_SMBUS_WORD_DATA: - zx2967_smbus_xfer_prepare(i2c, addr, read_write, - command, size, data); - break; - default: - return -EOPNOTSUPP; - } - - if (read_write == I2C_SMBUS_READ) - return zx2967_smbus_xfer_read(i2c, size, data); - - return zx2967_smbus_xfer_write(i2c); -} - -static u32 zx2967_i2c_func(struct i2c_adapter *adap) -{ - return I2C_FUNC_I2C | - I2C_FUNC_SMBUS_QUICK | - I2C_FUNC_SMBUS_BYTE | - I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_BLOCK_DATA | - I2C_FUNC_SMBUS_PROC_CALL | - I2C_FUNC_SMBUS_I2C_BLOCK; -} - -static int __maybe_unused zx2967_i2c_suspend(struct device *dev) -{ - struct zx2967_i2c *i2c = dev_get_drvdata(dev); - - i2c_mark_adapter_suspended(&i2c->adap); - clk_disable_unprepare(i2c->clk); - - return 0; -} - -static int __maybe_unused zx2967_i2c_resume(struct device *dev) -{ - struct zx2967_i2c *i2c = dev_get_drvdata(dev); - - clk_prepare_enable(i2c->clk); - i2c_mark_adapter_resumed(&i2c->adap); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops, - zx2967_i2c_suspend, zx2967_i2c_resume); - -static const struct i2c_algorithm zx2967_i2c_algo = { - .master_xfer = zx2967_i2c_xfer, - .smbus_xfer = zx2967_smbus_xfer, - .functionality = zx2967_i2c_func, -}; - -static const struct i2c_adapter_quirks zx2967_i2c_quirks = { - .flags = I2C_AQ_NO_ZERO_LEN, -}; - -static const struct of_device_id zx2967_i2c_of_match[] = { - { .compatible = "zte,zx296718-i2c", }, - { }, -}; -MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match); - -static int zx2967_i2c_probe(struct platform_device *pdev) -{ - struct zx2967_i2c *i2c; - void __iomem *reg_base; - struct clk *clk; - int ret; - - i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); - if (!i2c) - return -ENOMEM; - - reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(reg_base)) - return PTR_ERR(reg_base); - - clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "missing controller clock"); - return PTR_ERR(clk); - } - - ret = clk_prepare_enable(clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable i2c_clk\n"); - return ret; - } - - ret = device_property_read_u32(&pdev->dev, "clock-frequency", - &i2c->clk_freq); - if (ret) { - dev_err(&pdev->dev, "missing clock-frequency"); - return ret; - } - - ret = platform_get_irq(pdev, 0); - if (ret < 0) - return ret; - - i2c->irq = ret; - i2c->reg_base = reg_base; - i2c->clk = clk; - - init_completion(&i2c->complete); - platform_set_drvdata(pdev, i2c); - - ret = zx2967_i2c_reset_hardware(i2c); - if (ret) { - dev_err(&pdev->dev, "failed to initialize i2c controller\n"); - goto err_clk_unprepare; - } - - ret = devm_request_irq(&pdev->dev, i2c->irq, - zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c); - if (ret) { - dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq); - goto err_clk_unprepare; - } - - i2c_set_adapdata(&i2c->adap, i2c); - strlcpy(i2c->adap.name, "zx2967 i2c adapter", - sizeof(i2c->adap.name)); - i2c->adap.algo = &zx2967_i2c_algo; - i2c->adap.quirks = &zx2967_i2c_quirks; - i2c->adap.nr = pdev->id; - i2c->adap.dev.parent = &pdev->dev; - i2c->adap.dev.of_node = pdev->dev.of_node; - - ret = i2c_add_numbered_adapter(&i2c->adap); - if (ret) - goto err_clk_unprepare; - - return 0; - -err_clk_unprepare: - clk_disable_unprepare(i2c->clk); - return ret; -} - -static int zx2967_i2c_remove(struct platform_device *pdev) -{ - struct zx2967_i2c *i2c = platform_get_drvdata(pdev); - - i2c_del_adapter(&i2c->adap); - clk_disable_unprepare(i2c->clk); - - return 0; -} - -static struct platform_driver zx2967_i2c_driver = { - .probe = zx2967_i2c_probe, - .remove = zx2967_i2c_remove, - .driver = { - .name = "zx2967_i2c", - .of_match_table = zx2967_i2c_of_match, - .pm = &zx2967_i2c_dev_pm_ops, - }, -}; -module_platform_driver(zx2967_i2c_driver); - -MODULE_AUTHOR("Baoyou Xie "); -MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver"); -MODULE_LICENSE("GPL v2"); -- cgit v1.2.3