From c65e3d6ef4bfdc4c8460509f08507cf7dc026974 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 29 Aug 2017 13:45:11 +0200 Subject: iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL Data-ready line in LIS3MDL is routed to drdy pin and it is not possible to select a different INT pin. st_sensors_set_dataready_irq() assumes that if drdy int address is not exported in register map, irq trigger is not supported by the sensor and hw_irq_trigger is always false. Based on this configuration st_sensors_irq_thread does not consume generated interrupt causing an unhandled irq. Fix this taking into account status register address in st_sensors_set_dataready_irq() Fixes: 90efe0556292 (iio: st_sensors: harden interrupt handling) Signed-off-by: Lorenzo Bianconi Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/common/st_sensors/st_sensors_core.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/iio/common') diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index d99bb1460fe2..02e833b14db0 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -463,8 +463,17 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable) u8 drdy_mask; struct st_sensor_data *sdata = iio_priv(indio_dev); - if (!sdata->sensor_settings->drdy_irq.addr) + if (!sdata->sensor_settings->drdy_irq.addr) { + /* + * there are some devices (e.g. LIS3MDL) where drdy line is + * routed to a given pin and it is not possible to select a + * different one. Take into account irq status register + * to understand if irq trigger can be properly supported + */ + if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) + sdata->hw_irq_trigger = enable; return 0; + } /* Enable/Disable the interrupt generator 1. */ if (sdata->sensor_settings->drdy_irq.ig1.en_addr > 0) { -- cgit v1.2.3