From b71bb8639891827051af88d8dfb17ca608b6ae88 Mon Sep 17 00:00:00 2001
From: Johannes Thumshirn <johannes.thumshirn@men.de>
Date: Wed, 26 Feb 2014 17:29:06 +0100
Subject: mcb: Add PCI carrier for MEN Chameleon Bus

Add support for MCB over PCI devices. Both PCI attached on-board Chameleon FPGAs
as well as CompactPCI based MCB carrier cards are supported with this driver.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mcb/mcb-pci.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 114 insertions(+)
 create mode 100644 drivers/mcb/mcb-pci.c

(limited to 'drivers/mcb/mcb-pci.c')

diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
new file mode 100644
index 000000000000..99c742cbfb5b
--- /dev/null
+++ b/drivers/mcb/mcb-pci.c
@@ -0,0 +1,114 @@
+/*
+ * MEN Chameleon Bus.
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/mcb.h>
+
+#include "mcb-internal.h"
+
+struct priv {
+	struct mcb_bus *bus;
+	void __iomem *base;
+};
+
+static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct priv *priv;
+	phys_addr_t mapbase;
+	int ret;
+	int num_cells;
+	unsigned long flags;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+
+	mapbase = pci_resource_start(pdev, 0);
+	if (!mapbase) {
+		dev_err(&pdev->dev, "No PCI resource\n");
+		goto err_start;
+	}
+
+	ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+		goto err_start;
+	}
+
+	priv->base = pci_iomap(pdev, 0, 0);
+	if (!priv->base) {
+		dev_err(&pdev->dev, "Cannot ioremap\n");
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	flags = pci_resource_flags(pdev, 0);
+	if (flags & IORESOURCE_IO) {
+		ret = -ENOTSUPP;
+		dev_err(&pdev->dev,
+			"IO mapped PCI devices are not supported\n");
+		goto err_ioremap;
+	}
+
+	pci_set_drvdata(pdev, priv);
+
+	priv->bus = mcb_alloc_bus();
+
+	ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+	if (ret < 0)
+		goto err_drvdata;
+	num_cells = ret;
+
+	dev_dbg(&pdev->dev, "Found %d cells\n", num_cells);
+
+	mcb_bus_add_devices(priv->bus);
+
+err_drvdata:
+	pci_iounmap(pdev, priv->base);
+err_ioremap:
+	pci_release_region(pdev, 0);
+err_start:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void mcb_pci_remove(struct pci_dev *pdev)
+{
+	struct priv *priv = pci_get_drvdata(pdev);
+
+	mcb_release_bus(priv->bus);
+}
+
+static const struct pci_device_id mcb_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_MEN, PCI_DEVICE_ID_MEN_CHAMELEON) },
+	{ 0 },
+};
+MODULE_DEVICE_TABLE(pci, mcb_pci_tbl);
+
+static struct pci_driver mcb_pci_driver = {
+	.name = "mcb-pci",
+	.id_table = mcb_pci_tbl,
+	.probe = mcb_pci_probe,
+	.remove = mcb_pci_remove,
+};
+
+module_pci_driver(mcb_pci_driver);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MCB over PCI support");
-- 
cgit v1.2.3