From 215e50b0864678e2fd765a8d57ae9aec713156c4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 2 Jun 2021 13:04:43 +0200 Subject: mfd: max77686: Do not enforce (incorrect) interrupt trigger type Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210602110445.33536-2-krzysztof.kozlowski@canonical.com --- drivers/mfd/max77686.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index 2ad554b921d9..f9e12ab2bc75 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -209,8 +209,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c) ret = devm_regmap_add_irq_chip(&i2c->dev, max77686->regmap, max77686->irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT | - IRQF_SHARED, 0, irq_chip, + IRQF_ONESHOT | IRQF_SHARED, 0, irq_chip, &max77686->irq_data); if (ret < 0) { dev_err(&i2c->dev, "failed to add PMIC irq chip: %d\n", ret); -- cgit v1.2.3