From 920a9fa27e7805499cfe78491b36fed2322c02ec Mon Sep 17 00:00:00 2001 From: Pavel Skripkin Date: Sun, 6 Feb 2022 21:05:16 +0300 Subject: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code. Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Tested-by: Oleksij Rempel Reviewed-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/usb/asix_devices.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) (limited to 'drivers/net/usb/asix_devices.c') diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 9b72334aabb6..6ea44e53713a 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -755,7 +755,12 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf) priv->phy_addr = ret; priv->embd_phy = ((priv->phy_addr & 0x1f) == 0x10); - asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0); + ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1, &chipcode, 0); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret); + return ret; + } + chipcode &= AX_CHIPCODE_MASK; ret = (chipcode == AX_AX88772_CHIPCODE) ? ax88772_hw_reset(dev, 0) : @@ -919,11 +924,21 @@ static int ax88178_reset(struct usbnet *dev) int gpio0 = 0; u32 phyid; - asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0); + ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret); + return ret; + } + netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status); asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0); - asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0); + ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret); + return ret; + } + asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0); netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom); -- cgit v1.2.3