From 66e92e23a72761f5b53f970aeb1badc5fd92fc74 Mon Sep 17 00:00:00 2001 From: Vishnu Sankar Date: Thu, 14 Dec 2023 22:47:02 +0900 Subject: platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some ThinkPad systems ECFW use non-standard addresses for fan control and reporting. This patch adds support for such ECFW so that it can report the correct fan values. Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2. Suggested-by: Mark Pearson Signed-off-by: Vishnu Sankar Reviewed-by: Hans de Goede Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/thinkpad_acpi.c | 98 +++++++++++++++++++++++++++++++----- 1 file changed, 85 insertions(+), 13 deletions(-) (limited to 'drivers/platform') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 3392ae99ac3f..c4895e9bc714 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7948,8 +7948,19 @@ static struct ibm_struct volume_driver_data = { * TPACPI_FAN_WR_TPEC is also available and should be used to * command the fan. The X31/X40/X41 seems to have 8 fan levels, * but the ACPI tables just mention level 7. + * + * TPACPI_FAN_RD_TPEC_NS: + * This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.) + * that are using non-standard EC locations for reporting fan speeds. + * Currently these platforms only provide fan rpm reporting. + * */ +#define FAN_RPM_CAL_CONST 491520 /* FAN RPM calculation offset for some non-standard ECFW */ + +#define FAN_NS_CTRL_STATUS BIT(2) /* Bit which determines control is enabled or not */ +#define FAN_NS_CTRL BIT(4) /* Bit which determines control is by host or EC */ + enum { /* Fan control constants */ fan_status_offset = 0x2f, /* EC register 0x2f */ fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) @@ -7957,6 +7968,11 @@ enum { /* Fan control constants */ fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M) bit 0 selects which fan is active */ + fan_status_offset_ns = 0x93, /* Special status/control offset for non-standard EC Fan1 */ + fan2_status_offset_ns = 0x96, /* Special status/control offset for non-standard EC Fan2 */ + fan_rpm_status_ns = 0x95, /* Special offset for Fan1 RPM status for non-standard EC */ + fan2_rpm_status_ns = 0x98, /* Special offset for Fan2 RPM status for non-standard EC */ + TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ @@ -7967,6 +7983,7 @@ enum fan_status_access_mode { TPACPI_FAN_NONE = 0, /* No fan status or control */ TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ + TPACPI_FAN_RD_TPEC_NS, /* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */ }; enum fan_control_access_mode { @@ -7994,6 +8011,8 @@ static u8 fan_control_desired_level; static u8 fan_control_resume_level; static int fan_watchdog_maxinterval; +static bool fan_with_ns_addr; + static struct mutex fan_mutex; static void fan_watchdog_fire(struct work_struct *ignored); @@ -8123,6 +8142,15 @@ static int fan_get_status(u8 *status) } break; + case TPACPI_FAN_RD_TPEC_NS: + /* Default mode is AUTO which means controlled by EC */ + if (!acpi_ec_read(fan_status_offset_ns, &s)) + return -EIO; + + if (status) + *status = s; + + break; default: return -ENXIO; @@ -8139,7 +8167,8 @@ static int fan_get_status_safe(u8 *status) if (mutex_lock_killable(&fan_mutex)) return -ERESTARTSYS; rc = fan_get_status(&s); - if (!rc) + /* NS EC doesn't have register with level settings */ + if (!rc && !fan_with_ns_addr) fan_update_desired_level(s); mutex_unlock(&fan_mutex); @@ -8166,7 +8195,13 @@ static int fan_get_speed(unsigned int *speed) if (likely(speed)) *speed = (hi << 8) | lo; + break; + case TPACPI_FAN_RD_TPEC_NS: + if (!acpi_ec_read(fan_rpm_status_ns, &lo)) + return -EIO; + if (speed) + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; break; default: @@ -8178,7 +8213,7 @@ static int fan_get_speed(unsigned int *speed) static int fan2_get_speed(unsigned int *speed) { - u8 hi, lo; + u8 hi, lo, status; bool rc; switch (fan_status_access_mode) { @@ -8194,7 +8229,21 @@ static int fan2_get_speed(unsigned int *speed) if (likely(speed)) *speed = (hi << 8) | lo; + break; + case TPACPI_FAN_RD_TPEC_NS: + rc = !acpi_ec_read(fan2_status_offset_ns, &status); + if (rc) + return -EIO; + if (!(status & FAN_NS_CTRL_STATUS)) { + pr_info("secondary fan control not supported\n"); + return -EIO; + } + rc = !acpi_ec_read(fan2_rpm_status_ns, &lo); + if (rc) + return -EIO; + if (speed) + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; break; default: @@ -8697,6 +8746,7 @@ static const struct attribute_group fan_driver_attr_group = { #define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ #define TPACPI_FAN_2CTL 0x0004 /* selects fan2 control */ #define TPACPI_FAN_NOFAN 0x0008 /* no fan available */ +#define TPACPI_FAN_NS 0x0010 /* For EC with non-Standard register addresses */ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), @@ -8715,6 +8765,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */ TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL), /* T15g (2nd gen) */ + TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS), /* L13 Yoga Gen 2 */ + TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS), /* X13 Yoga Gen 2*/ TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ }; @@ -8749,18 +8801,27 @@ static int __init fan_init(struct ibm_init_struct *iibm) return -ENODEV; } + if (quirks & TPACPI_FAN_NS) { + pr_info("ECFW with non-standard fan reg control found\n"); + fan_with_ns_addr = 1; + /* Fan ctrl support from host is undefined for now */ + tp_features.fan_ctrl_status_undef = 1; + } + if (gfan_handle) { /* 570, 600e/x, 770e, 770x */ fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN; } else { /* all other ThinkPads: note that even old-style * ThinkPad ECs supports the fan control register */ - if (likely(acpi_ec_read(fan_status_offset, - &fan_control_initial_status))) { + if (fan_with_ns_addr || + likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) { int res; unsigned int speed; - fan_status_access_mode = TPACPI_FAN_RD_TPEC; + fan_status_access_mode = fan_with_ns_addr ? + TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC; + if (quirks & TPACPI_FAN_Q1) fan_quirk1_setup(); /* Try and probe the 2nd fan */ @@ -8769,7 +8830,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (res >= 0 && speed != FAN_NOT_PRESENT) { /* It responded - so let's assume it's there */ tp_features.second_fan = 1; - tp_features.second_fan_ctl = 1; + /* fan control not currently available for ns ECFW */ + tp_features.second_fan_ctl = !fan_with_ns_addr; pr_info("secondary fan control detected & enabled\n"); } else { /* Fan not auto-detected */ @@ -8944,6 +9006,7 @@ static int fan_read(struct seq_file *m) str_enabled_disabled(status), status); break; + case TPACPI_FAN_RD_TPEC_NS: case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ rc = fan_get_status_safe(&status); @@ -8958,13 +9021,22 @@ static int fan_read(struct seq_file *m) seq_printf(m, "speed:\t\t%d\n", speed); - if (status & TP_EC_FAN_FULLSPEED) - /* Disengaged mode takes precedence */ - seq_printf(m, "level:\t\tdisengaged\n"); - else if (status & TP_EC_FAN_AUTO) - seq_printf(m, "level:\t\tauto\n"); - else - seq_printf(m, "level:\t\t%d\n", status); + if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) { + /* + * No full speed bit in NS EC + * EC Auto mode is set by default. + * No other levels settings available + */ + seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto"); + } else { + if (status & TP_EC_FAN_FULLSPEED) + /* Disengaged mode takes precedence */ + seq_printf(m, "level:\t\tdisengaged\n"); + else if (status & TP_EC_FAN_AUTO) + seq_printf(m, "level:\t\tauto\n"); + else + seq_printf(m, "level:\t\t%d\n", status); + } break; case TPACPI_FAN_NONE: -- cgit v1.2.3