From 3df4235ac41c2b8c3c5cd9c7798bc4a3105c0bc4 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 25 Mar 2019 21:55:57 +0800 Subject: regulator: max77650: Convert MAX77651 SBB1 to pickable linear range The pickable linear range is suitable for The MAX77651 SBB1. According to MAX77651 TV_SBB1 Code Table: Use BIT[1:0] as range selectors. Use BIT[5:2] as selectors for each linear range. The MAX77651 SBB1 supports up to selector 57, selector 58 ~ 63 are RSVD, thus set n_voltage to 58. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/regulator/max77650-regulator.c | 134 +++++++++++---------------------- 1 file changed, 45 insertions(+), 89 deletions(-) (limited to 'drivers/regulator/max77650-regulator.c') diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c index 5c4f86c98510..ecf8cf7aad20 100644 --- a/drivers/regulator/max77650-regulator.c +++ b/drivers/regulator/max77650-regulator.c @@ -20,6 +20,8 @@ #define MAX77650_REGULATOR_V_LDO_MASK GENMASK(6, 0) #define MAX77650_REGULATOR_V_SBB_MASK GENMASK(5, 0) +#define MAX77651_REGULATOR_V_SBB1_MASK GENMASK(5, 2) +#define MAX77651_REGULATOR_V_SBB1_RANGE_MASK GENMASK(1, 0) #define MAX77650_REGULATOR_AD_MASK BIT(3) #define MAX77650_REGULATOR_AD_DISABLED 0x00 @@ -27,6 +29,8 @@ #define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6) +static struct max77650_regulator_desc max77651_SBB1_desc; + enum { MAX77650_REGULATOR_ID_LDO = 0, MAX77650_REGULATOR_ID_SBB0, @@ -41,43 +45,20 @@ struct max77650_regulator_desc { unsigned int regB; }; -static const unsigned int max77651_sbb1_regulator_volt_table[] = { - 2400000, 3200000, 4000000, 4800000, - 2450000, 3250000, 4050000, 4850000, - 2500000, 3300000, 4100000, 4900000, - 2550000, 3350000, 4150000, 4950000, - 2600000, 3400000, 4200000, 5000000, - 2650000, 3450000, 4250000, 5050000, - 2700000, 3500000, 4300000, 5100000, - 2750000, 3550000, 4350000, 5150000, - 2800000, 3600000, 4400000, 5200000, - 2850000, 3650000, 4450000, 5250000, - 2900000, 3700000, 4500000, 0, - 2950000, 3750000, 4550000, 0, - 3000000, 3800000, 4600000, 0, - 3050000, 3850000, 4650000, 0, - 3100000, 3900000, 4700000, 0, - 3150000, 3950000, 4750000, 0, +static const unsigned int max77651_sbb1_volt_range_sel[] = { + 0x0, 0x1, 0x2, 0x3 }; -#define MAX77651_REGULATOR_SBB1_SEL_DEC(_val) \ - (((_val & 0x3c) >> 2) | ((_val & 0x03) << 4)) -#define MAX77651_REGULATOR_SBB1_SEL_ENC(_val) \ - (((_val & 0x30) >> 4) | ((_val & 0x0f) << 2)) - -#define MAX77650_REGULATOR_SBB1_SEL_DECR(_val) \ - do { \ - _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \ - _val--; \ - _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \ - } while (0) - -#define MAX77650_REGULATOR_SBB1_SEL_INCR(_val) \ - do { \ - _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \ - _val++; \ - _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \ - } while (0) +static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = { + /* range index 0 */ + REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000), + /* range index 1 */ + REGULATOR_LINEAR_RANGE(3200000, 0x00, 0x0f, 50000), + /* range index 2 */ + REGULATOR_LINEAR_RANGE(4000000, 0x00, 0x0f, 50000), + /* range index 3 */ + REGULATOR_LINEAR_RANGE(4800000, 0x00, 0x09, 50000), +}; static const unsigned int max77650_current_limit_table[] = { 1000000, 866000, 707000, 500000, @@ -130,6 +111,7 @@ static int max77650_regulator_disable(struct regulator_dev *rdev) static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel) { + struct max77650_regulator_desc *rdesc = rdev_get_drvdata(rdev); int rv = 0, curr, diff; bool ascending; @@ -137,15 +119,24 @@ static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev, * If the regulator is disabled, we can program the desired * voltage right away. */ - if (!max77650_regulator_is_enabled(rdev)) - return regulator_set_voltage_sel_regmap(rdev, sel); + if (!max77650_regulator_is_enabled(rdev)) { + if (rdesc == &max77651_SBB1_desc) + return regulator_set_voltage_sel_pickable_regmap(rdev, + sel); + else + return regulator_set_voltage_sel_regmap(rdev, sel); + } /* * Otherwise we need to manually ramp the output voltage up/down * one step at a time. */ - curr = regulator_get_voltage_sel_regmap(rdev); + if (rdesc == &max77651_SBB1_desc) + curr = regulator_get_voltage_sel_pickable_regmap(rdev); + else + curr = regulator_get_voltage_sel_regmap(rdev); + if (curr < 0) return curr; @@ -162,57 +153,18 @@ static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev, * the selector equals 0. */ for (ascending ? curr++ : curr--;; ascending ? curr++ : curr--) { - rv = regulator_set_voltage_sel_regmap(rdev, curr); - if (rv) - return rv; - - if (curr == sel) - break; - } - - return 0; -} - -/* - * Special case: non-linear voltage table for max77651 SBB1 - software - * must ensure the voltage is ramped in 50mV increments. - */ -static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev, - unsigned int sel) -{ - int rv = 0, curr, vcurr, vdest, vdiff; - - /* - * If the regulator is disabled, we can program the desired - * voltage right away. - */ - if (!max77650_regulator_is_enabled(rdev)) - return regulator_set_voltage_sel_regmap(rdev, sel); - - curr = regulator_get_voltage_sel_regmap(rdev); - if (curr < 0) - return curr; - - if (curr == sel) - return 0; /* Already there. */ - - vcurr = max77651_sbb1_regulator_volt_table[curr]; - vdest = max77651_sbb1_regulator_volt_table[sel]; - vdiff = vcurr - vdest; - - for (;;) { - if (vdiff > 0) - MAX77650_REGULATOR_SBB1_SEL_DECR(curr); + if (rdesc == &max77651_SBB1_desc) + rv = regulator_set_voltage_sel_pickable_regmap(rdev, + curr); else - MAX77650_REGULATOR_SBB1_SEL_INCR(curr); + rv = regulator_set_voltage_sel_regmap(rdev, curr); - rv = regulator_set_voltage_sel_regmap(rdev, curr); if (rv) return rv; if (curr == sel) break; - }; + } return 0; } @@ -241,14 +193,14 @@ static const struct regulator_ops max77650_regulator_SBB_ops = { .set_active_discharge = regulator_set_active_discharge_regmap, }; -/* Special case for max77651 SBB1 - non-linear voltage mapping. */ +/* Special case for max77651 SBB1 - pickable linear-range voltage mapping. */ static const struct regulator_ops max77651_SBB1_regulator_ops = { .is_enabled = max77650_regulator_is_enabled, .enable = max77650_regulator_enable, .disable = max77650_regulator_disable, - .list_voltage = regulator_list_voltage_table, - .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel, + .list_voltage = regulator_list_voltage_pickable_linear_range, + .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, + .set_voltage_sel = max77650_regulator_set_voltage_sel, .get_current_limit = regulator_get_current_limit_regmap, .set_current_limit = regulator_set_current_limit_regmap, .set_active_discharge = regulator_set_active_discharge_regmap, @@ -345,9 +297,13 @@ static struct max77650_regulator_desc max77651_SBB1_desc = { .supply_name = "in-sbb1", .id = MAX77650_REGULATOR_ID_SBB1, .ops = &max77651_SBB1_regulator_ops, - .volt_table = max77651_sbb1_regulator_volt_table, - .n_voltages = ARRAY_SIZE(max77651_sbb1_regulator_volt_table), - .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK, + .linear_range_selectors = max77651_sbb1_volt_range_sel, + .linear_ranges = max77651_sbb1_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(max77651_sbb1_volt_ranges), + .n_voltages = 58, + .vsel_range_mask = MAX77651_REGULATOR_V_SBB1_RANGE_MASK, + .vsel_range_reg = MAX77650_REG_CNFG_SBB1_A, + .vsel_mask = MAX77651_REGULATOR_V_SBB1_MASK, .vsel_reg = MAX77650_REG_CNFG_SBB1_A, .active_discharge_off = MAX77650_REGULATOR_AD_DISABLED, .active_discharge_on = MAX77650_REGULATOR_AD_ENABLED, -- cgit v1.2.3