From 66ec4bfcb55e5da0a7258a954f7be1495c053167 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Wed, 20 Nov 2019 21:15:16 +0530 Subject: thermal: rockchip: Appease the kernel-doc deity Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Describe missing function parameters where needed. Fixes up the following warnings when compiled with make W=1: linux.git/drivers/thermal/rockchip_thermal.c:27: warning: cannot understand function prototype: 'enum tshut_mode ' linux.git/drivers/thermal/rockchip_thermal.c:37: warning: cannot understand function prototype: 'enum tshut_polarity ' linux.git/drivers/thermal/rockchip_thermal.c:46: warning: cannot understand function prototype: 'enum sensor_id ' linux.git/drivers/thermal/rockchip_thermal.c:56: warning: cannot understand function prototype: 'enum adc_sort_mode ' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'chn_id' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:123: warning: Function parameter or member 'control' not described in 'rockchip_tsadc_chip' linux.git/drivers/thermal/rockchip_thermal.c:167: warning: Function parameter or member 'sensors' not described in 'rockchip_thermal_data' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'grf' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'regs' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:608: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv2_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'grf' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:644: warning: Function parameter or member 'tshut_polarity' not described in 'rk_tsadcv3_initialize' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'regs' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:732: warning: Function parameter or member 'enable' not described in 'rk_tsadcv3_control' linux.git/drivers/thermal/rockchip_thermal.c:1211: warning: Function parameter or member 'reset' not described in 'rockchip_thermal_reset_controller' Signed-off-by: Amit Kucheria Reviewed-by: Viresh Kumar Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/c3cbdb0619fec602668ba7ae703ba49d67e30b33.1574242756.git.amit.kucheria@linaro.org --- drivers/thermal/rockchip_thermal.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'drivers/thermal/rockchip_thermal.c') diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 343c2f5c5a25..9ed8085bb792 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -19,7 +19,7 @@ #include #include -/** +/* * If the temperature over a period of time High, * the resulting TSHUT gave CRU module,let it reset the entire chip, * or via GPIO give PMIC. @@ -29,7 +29,7 @@ enum tshut_mode { TSHUT_MODE_GPIO, }; -/** +/* * The system Temperature Sensors tshut(tshut) polarity * the bit 8 is tshut polarity. * 0: low active, 1: high active @@ -39,7 +39,7 @@ enum tshut_polarity { TSHUT_HIGH_ACTIVE, }; -/** +/* * The system has two Temperature Sensors. * sensor0 is for CPU, and sensor1 is for GPU. */ @@ -48,7 +48,7 @@ enum sensor_id { SENSOR_GPU, }; -/** +/* * The conversion table has the adc value and temperature. * ADC_DECREMENT: the adc value is of diminishing.(e.g. rk3288_code_table) * ADC_INCREMENT: the adc value is incremental.(e.g. rk3368_code_table) @@ -80,13 +80,14 @@ struct chip_tsadc_table { /** * struct rockchip_tsadc_chip - hold the private data of tsadc chip - * @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel + * @chn_id: array of sensor ids of chip corresponding to the channel * @chn_num: the channel number of tsadc chip * @tshut_temp: the hardware-controlled shutdown temperature value * @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO) * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH) * @initialize: SoC special initialize tsadc controller method * @irq_ack: clear the interrupt + * @control: enable/disable method for the tsadc controller * @get_temp: get the temperature * @set_alarm_temp: set the high temperature interrupt * @set_tshut_temp: set the hardware-controlled shutdown temperature @@ -139,7 +140,7 @@ struct rockchip_thermal_sensor { * @chip: pointer to the platform/configuration data * @pdev: platform device of thermal * @reset: the reset controller of tsadc - * @sensors[SOC_MAX_SENSORS]: the thermal sensor + * @sensors: array of thermal sensors * @clk: the controller clock is divided by the exteral 24MHz * @pclk: the advanced peripherals bus clock * @grf: the general register file will be used to do static set by software @@ -590,6 +591,9 @@ static int rk_tsadcv2_code_to_temp(const struct chip_tsadc_table *table, /** * rk_tsadcv2_initialize - initialize TASDC Controller. + * @grf: the general register file will be used to do static set by software + * @regs: the base address of tsadc controller + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH) * * (1) Set TSADC_V2_AUTO_PERIOD: * Configure the interleave between every two accessing of @@ -624,6 +628,9 @@ static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs, /** * rk_tsadcv3_initialize - initialize TASDC Controller. + * @grf: the general register file will be used to do static set by software + * @regs: the base address of tsadc controller + * @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH) * * (1) The tsadc control power sequence. * @@ -723,6 +730,8 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable) /** * rk_tsadcv3_control - the tsadc controller is enabled or disabled. + * @regs: the base address of tsadc controller + * @enable: boolean flag to enable the controller * * NOTE: TSADC controller works at auto mode, and some SoCs need set the * tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output @@ -1206,6 +1215,7 @@ rockchip_thermal_register_sensor(struct platform_device *pdev, /** * Reset TSADC Controller, reset all tsadc registers. + * @reset: the reset controller of tsadc */ static void rockchip_thermal_reset_controller(struct reset_control *reset) { -- cgit v1.2.3