From 6485fc18faa01e8845b1e5bb55118e633f84d1f2 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 9 Jun 2021 13:40:18 -0500 Subject: ACPI: Add quirks for AMD Renoir/Lucienne CPUs to force the D3 hint AMD systems from Renoir and Lucienne require that the NVME controller is put into D3 over a Modern Standby / suspend-to-idle cycle. This is "typically" accomplished using the `StorageD3Enable` property in the _DSD, but this property was introduced after many of these systems launched and most OEM systems don't have it in their BIOS. On AMD Renoir without these drives going into D3 over suspend-to-idle the resume will fail with the NVME controller being reset and a trace like this in the kernel logs: ``` [ 83.556118] nvme nvme0: I/O 161 QID 2 timeout, aborting [ 83.556178] nvme nvme0: I/O 162 QID 2 timeout, aborting [ 83.556187] nvme nvme0: I/O 163 QID 2 timeout, aborting [ 83.556196] nvme nvme0: I/O 164 QID 2 timeout, aborting [ 95.332114] nvme nvme0: I/O 25 QID 0 timeout, reset controller [ 95.332843] nvme nvme0: Abort status: 0x371 [ 95.332852] nvme nvme0: Abort status: 0x371 [ 95.332856] nvme nvme0: Abort status: 0x371 [ 95.332859] nvme nvme0: Abort status: 0x371 [ 95.332909] PM: dpm_run_callback(): pci_pm_resume+0x0/0xe0 returns -16 [ 95.332936] nvme 0000:03:00.0: PM: failed to resume async: error -16 ``` The Microsoft documentation for StorageD3Enable mentioned that Windows has a hardcoded allowlist for D3 support, which was used for these platforms. Introduce quirks to hardcode them for Linux as well. As this property is now "standardized", OEM systems using AMD Cezanne and newer APU's have adopted this property, and quirks like this should not be necessary. CC: Shyam-sundar S-k CC: Alexander Deucher CC: Prike Liang Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro Signed-off-by: Mario Limonciello Acked-by: Rafael J. Wysocki Tested-by: Julian Sikorski Signed-off-by: Christoph Hellwig --- drivers/acpi/device_pm.c | 3 +++ drivers/acpi/internal.h | 9 +++++++++ drivers/acpi/x86/utils.c | 25 +++++++++++++++++++++++++ 3 files changed, 37 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index d76ab50c71dc..6dd9bd64903e 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -1360,6 +1360,9 @@ bool acpi_storage_d3(struct device *dev) struct acpi_device *adev = ACPI_COMPANION(dev); u8 val; + if (force_storage_d3()) + return true; + if (!adev) return false; if (fwnode_property_read_u8(acpi_fwnode_handle(adev), "StorageD3Enable", diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index f973bbe90e5e..e29ec463bb07 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -236,6 +236,15 @@ static inline int suspend_nvs_save(void) { return 0; } static inline void suspend_nvs_restore(void) {} #endif +#ifdef CONFIG_X86 +bool force_storage_d3(void); +#else +static inline bool force_storage_d3(void) +{ + return false; +} +#endif + /*-------------------------------------------------------------------------- Device properties -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/x86/utils.c b/drivers/acpi/x86/utils.c index bdc1ba00aee9..f22f23933063 100644 --- a/drivers/acpi/x86/utils.c +++ b/drivers/acpi/x86/utils.c @@ -135,3 +135,28 @@ bool acpi_device_always_present(struct acpi_device *adev) return ret; } + +/* + * AMD systems from Renoir and Lucienne *require* that the NVME controller + * is put into D3 over a Modern Standby / suspend-to-idle cycle. + * + * This is "typically" accomplished using the `StorageD3Enable` + * property in the _DSD that is checked via the `acpi_storage_d3` function + * but this property was introduced after many of these systems launched + * and most OEM systems don't have it in their BIOS. + * + * The Microsoft documentation for StorageD3Enable mentioned that Windows has + * a hardcoded allowlist for D3 support, which was used for these platforms. + * + * This allows quirking on Linux in a similar fashion. + */ +static const struct x86_cpu_id storage_d3_cpu_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL), /* Renoir */ + X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL), /* Lucienne */ + {} +}; + +bool force_storage_d3(void) +{ + return x86_match_cpu(storage_d3_cpu_ids); +} -- cgit v1.2.3