From 9719b8f5bc35664a23de1ddfbc85217398af0df8 Mon Sep 17 00:00:00 2001 From: Igor Plyatov Date: Mon, 28 Mar 2011 16:56:15 +0400 Subject: ata: pata_at91.c bugfix for high master clock The AT91SAM9 microcontrollers with master clock higher then 105 MHz and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver does not detect ATA device. Signed-off-by: Igor Plyatov Signed-off-by: Jeff Garzik --- drivers/ata/pata_at91.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 0da0dcc7dd08..a9a066a18ccf 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c @@ -33,11 +33,12 @@ #define DRV_NAME "pata_at91" -#define DRV_VERSION "0.1" +#define DRV_VERSION "0.2" #define CF_IDE_OFFSET 0x00c00000 #define CF_ALT_IDE_OFFSET 0x00e00000 #define CF_IDE_RES_SIZE 0x08 +#define NCS_RD_PULSE_LIMIT 0x3f /* maximal value for pulse bitfields */ struct at91_ide_info { unsigned long mode; @@ -109,6 +110,11 @@ static void set_smc_timing(struct device *dev, /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ ncs_read_setup = 1; ncs_read_pulse = read_cycle - 2; + if (ncs_read_pulse > NCS_RD_PULSE_LIMIT) { + ncs_read_pulse = NCS_RD_PULSE_LIMIT; + dev_warn(dev, "ncs_read_pulse limited to maximal value %lu\n", + ncs_read_pulse); + } /* Write timings same as read timings */ write_cycle = read_cycle; -- cgit v1.2.3