From 04703bfd7f99c016a823c74712b97f8b5590ce87 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 18:02:53 +0200 Subject: drm/meson: dw-hdmi: power up phy on device init The phy is not in a useful state right after init. It will become useful, including for auxiliary function such as CEC or ARC, after the first mode is set. This is a problem on systems where the display is using another interface like DSI or CVBS. This change refactor the init and mode change callback to power up the PHY on init and leave only what is necessary for mode changes in the related function. This is enough to fix CEC operation when HDMI display is not enabled. Fixes: 3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240426160256.3089978-2-jbrunet@baylibre.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-2-jbrunet@baylibre.com --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 51 ++++++++++++----------------------- 1 file changed, 17 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index 5a9538bc0e26..a83d93078537 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -384,26 +384,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, dw_hdmi_bus_fmt_is_420(hdmi)) mode_is_420 = true; - /* Enable clocks */ - regmap_update_bits(priv->hhi, HHI_HDMI_CLK_CNTL, 0xffff, 0x100); - - /* Bring HDMITX MEM output of power down */ - regmap_update_bits(priv->hhi, HHI_MEM_PD_REG0, 0xff << 8, 0); - - /* Bring out of reset */ - dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_SW_RESET, 0); - - /* Enable internal pixclk, tmds_clk, spdif_clk, i2s_clk, cecclk */ - dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL, - 0x3, 0x3); - - /* Enable cec_clk and hdcp22_tmdsclk_en */ - dw_hdmi_top_write_bits(dw_hdmi, HDMITX_TOP_CLK_CNTL, - 0x3 << 4, 0x3 << 4); - - /* Enable normal output to PHY */ - dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); - /* TMDS pattern setup */ if (mode->clock > 340000 && !mode_is_420) { dw_hdmi->data->top_write(dw_hdmi, HDMITX_TOP_TMDS_CLK_PTTN_01, @@ -425,20 +405,6 @@ static int dw_hdmi_phy_init(struct dw_hdmi *hdmi, void *data, /* Setup PHY parameters */ meson_hdmi_phy_setup_mode(dw_hdmi, mode, mode_is_420); - /* Setup PHY */ - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - 0xffff << 16, 0x0390 << 16); - - /* BIT_INVERT */ - if (dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || - dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || - dw_hdmi_is_compatible(dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), 0); - else - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), BIT(17)); - /* Disable clock, fifo, fifo_wr */ regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, 0xf, 0); @@ -656,6 +622,23 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_CLK_CNTL, 0xff); + /* Enable normal output to PHY */ + meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); + + /* Setup PHY */ + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + 0xffff << 16, 0x0390 << 16); + + /* BIT_INVERT */ + if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || + dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || + dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + BIT(17), 0); + else + regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, + BIT(17), BIT(17)); + /* Enable HDMI-TX Interrupt */ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, HDMITX_TOP_INTR_CORE); -- cgit v1.2.3 From 08001033121dd92b8297a5b7333636b466c30f13 Mon Sep 17 00:00:00 2001 From: Jerome Brunet Date: Fri, 26 Apr 2024 18:02:54 +0200 Subject: drm/meson: dw-hdmi: add bandgap setting for g12 When no mode is set, the utility pin appears to be grounded. No signal is getting through. This is problematic because ARC and eARC use this line and may do so even if no display mode is set. This change enable the bandgap setting on g12 chip, which fix the problem with the utility pin. This is done by restoring init values on PHY init and disable. Fixes: 3b7c1237a72a ("drm/meson: Add G12A support for the DW-HDMI Glue") Signed-off-by: Jerome Brunet Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20240426160256.3089978-3-jbrunet@baylibre.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20240426160256.3089978-3-jbrunet@baylibre.com --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 43 +++++++++++++++++++++-------------- 1 file changed, 26 insertions(+), 17 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index a83d93078537..5565f7777529 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -106,6 +106,8 @@ #define HHI_HDMI_CLK_CNTL 0x1cc /* 0x73 */ #define HHI_HDMI_PHY_CNTL0 0x3a0 /* 0xe8 */ #define HHI_HDMI_PHY_CNTL1 0x3a4 /* 0xe9 */ +#define PHY_CNTL1_INIT 0x03900000 +#define PHY_INVERT BIT(17) #define HHI_HDMI_PHY_CNTL2 0x3a8 /* 0xea */ #define HHI_HDMI_PHY_CNTL3 0x3ac /* 0xeb */ #define HHI_HDMI_PHY_CNTL4 0x3b0 /* 0xec */ @@ -130,6 +132,8 @@ struct meson_dw_hdmi_data { unsigned int addr); void (*dwc_write)(struct meson_dw_hdmi *dw_hdmi, unsigned int addr, unsigned int data); + u32 cntl0_init; + u32 cntl1_init; }; struct meson_dw_hdmi { @@ -458,7 +462,9 @@ static void dw_hdmi_phy_disable(struct dw_hdmi *hdmi, DRM_DEBUG_DRIVER("\n"); - regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, 0); + /* Fallback to init mode */ + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, dw_hdmi->data->cntl1_init); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, dw_hdmi->data->cntl0_init); } static enum drm_connector_status dw_hdmi_read_hpd(struct dw_hdmi *hdmi, @@ -576,11 +582,22 @@ static const struct regmap_config meson_dw_hdmi_regmap_config = { .fast_io = true, }; -static const struct meson_dw_hdmi_data meson_dw_hdmi_gx_data = { +static const struct meson_dw_hdmi_data meson_dw_hdmi_gxbb_data = { .top_read = dw_hdmi_top_read, .top_write = dw_hdmi_top_write, .dwc_read = dw_hdmi_dwc_read, .dwc_write = dw_hdmi_dwc_write, + .cntl0_init = 0x0, + .cntl1_init = PHY_CNTL1_INIT | PHY_INVERT, +}; + +static const struct meson_dw_hdmi_data meson_dw_hdmi_gxl_data = { + .top_read = dw_hdmi_top_read, + .top_write = dw_hdmi_top_write, + .dwc_read = dw_hdmi_dwc_read, + .dwc_write = dw_hdmi_dwc_write, + .cntl0_init = 0x0, + .cntl1_init = PHY_CNTL1_INIT, }; static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = { @@ -588,6 +605,8 @@ static const struct meson_dw_hdmi_data meson_dw_hdmi_g12a_data = { .top_write = dw_hdmi_g12a_top_write, .dwc_read = dw_hdmi_g12a_dwc_read, .dwc_write = dw_hdmi_g12a_dwc_write, + .cntl0_init = 0x000b4242, /* Bandgap */ + .cntl1_init = PHY_CNTL1_INIT, }; static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) @@ -626,18 +645,8 @@ static void meson_dw_hdmi_init(struct meson_dw_hdmi *meson_dw_hdmi) meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_BIST_CNTL, BIT(12)); /* Setup PHY */ - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - 0xffff << 16, 0x0390 << 16); - - /* BIT_INVERT */ - if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || - dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || - dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-g12a-dw-hdmi")) - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), 0); - else - regmap_update_bits(priv->hhi, HHI_HDMI_PHY_CNTL1, - BIT(17), BIT(17)); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL1, meson_dw_hdmi->data->cntl1_init); + regmap_write(priv->hhi, HHI_HDMI_PHY_CNTL0, meson_dw_hdmi->data->cntl0_init); /* Enable HDMI-TX Interrupt */ meson_dw_hdmi->data->top_write(meson_dw_hdmi, HDMITX_TOP_INTR_STAT_CLR, @@ -848,11 +857,11 @@ static const struct dev_pm_ops meson_dw_hdmi_pm_ops = { static const struct of_device_id meson_dw_hdmi_of_table[] = { { .compatible = "amlogic,meson-gxbb-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxbb_data }, { .compatible = "amlogic,meson-gxl-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxl_data }, { .compatible = "amlogic,meson-gxm-dw-hdmi", - .data = &meson_dw_hdmi_gx_data }, + .data = &meson_dw_hdmi_gxl_data }, { .compatible = "amlogic,meson-g12a-dw-hdmi", .data = &meson_dw_hdmi_g12a_data }, { } -- cgit v1.2.3 From 6897204ea3df808d342c8e4613135728bc538bcd Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 2 May 2024 15:32:35 -0700 Subject: drm/connector: Add \n to message about demoting connector force-probes The debug print clearly lacks a \n at the end. Add it. Fixes: 8f86c82aba8b ("drm/connector: demote connector force-probes for non-master clients") Reviewed-by: Abhinav Kumar Reviewed-by: Simon Ser Reviewed-by: Dmitry Baryshkov Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20240502153234.1.I2052f01c8d209d9ae9c300b87c6e4f60bd3cc99e@changeid --- drivers/gpu/drm/drm_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index b0516505f7ae..4d2df7f64dc5 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -2940,7 +2940,7 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, dev->mode_config.max_width, dev->mode_config.max_height); else - drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe", + drm_dbg_kms(dev, "User-space requested a forced probe on [CONNECTOR:%d:%s] but is not the DRM master, demoting to read-only probe\n", connector->base.id, connector->name); } -- cgit v1.2.3