From ceb013b2d9a2946035de5e1827624edc85ae9484 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 4 Mar 2024 21:31:06 +0100 Subject: i2c: i801: Avoid potential double call to gpiod_remove_lookup_table If registering the platform device fails, the lookup table is removed in the error path. On module removal we would try to remove the lookup table again. Fix this by setting priv->lookup only if registering the platform device was successful. In addition free the memory allocated for the lookup table in the error path. Fixes: d308dfbf62ef ("i2c: mux/i801: Switch to use descriptor passing") Cc: stable@vger.kernel.org Reviewed-by: Andi Shyti Reviewed-by: Linus Walleij Signed-off-by: Heiner Kallweit Signed-off-by: Andi Shyti --- drivers/i2c/busses/i2c-i801.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 9a0a77383ca8..274e987e4cfa 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1416,7 +1416,6 @@ static void i801_add_mux(struct i801_priv *priv) lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip, mux_config->gpios[i], "mux", 0); gpiod_add_lookup_table(lookup); - priv->lookup = lookup; /* * Register the mux device, we use PLATFORM_DEVID_NONE here @@ -1430,7 +1429,10 @@ static void i801_add_mux(struct i801_priv *priv) sizeof(struct i2c_mux_gpio_platform_data)); if (IS_ERR(priv->mux_pdev)) { gpiod_remove_lookup_table(lookup); + devm_kfree(dev, lookup); dev_err(dev, "Failed to register i2c-mux-gpio device\n"); + } else { + priv->lookup = lookup; } } -- cgit v1.2.3