From b05d39466ba111fc3775d5d46180b73c34ebe8f7 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 15 May 2023 09:26:04 -0700 Subject: leds: qcom-lpg: Fix PWM period limits The introduction of high resolution PWM support changed the order of the operations in the calculation of min and max period. The result in both divisions is in most cases a truncation to 0, which limits the period to the range of [0, 0]. Both numerators (and denominators) are within 64 bits, so the whole expression can be put directly into the div64_u64, instead of doing it partially. Fixes: b00d2ed37617 ("leds: rgb: leds-qcom-lpg: Add support for high resolution PWM") Reviewed-by: Caleb Connolly Tested-by: Steev Klimaszewski Signed-off-by: Bjorn Andersson Acked-by: Lee Jones Tested-by: Johan Hovold Tested-by: Neil Armstrong # on SM8550-QRD Link: https://lore.kernel.org/r/20230515162604.649203-1-quic_bjorande@quicinc.com Signed-off-by: Johan Hovold --- drivers/leds/rgb/leds-qcom-lpg.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c index 55a037234df1..1c849814a491 100644 --- a/drivers/leds/rgb/leds-qcom-lpg.c +++ b/drivers/leds/rgb/leds-qcom-lpg.c @@ -312,14 +312,14 @@ static int lpg_calc_freq(struct lpg_channel *chan, uint64_t period) max_res = LPG_RESOLUTION_9BIT; } - min_period = (u64)NSEC_PER_SEC * - div64_u64((1 << pwm_resolution_arr[0]), clk_rate_arr[clk_len - 1]); + min_period = div64_u64((u64)NSEC_PER_SEC * (1 << pwm_resolution_arr[0]), + clk_rate_arr[clk_len - 1]); if (period <= min_period) return -EINVAL; /* Limit period to largest possible value, to avoid overflows */ - max_period = (u64)NSEC_PER_SEC * max_res * LPG_MAX_PREDIV * - div64_u64((1 << LPG_MAX_M), 1024); + max_period = div64_u64((u64)NSEC_PER_SEC * max_res * LPG_MAX_PREDIV * (1 << LPG_MAX_M), + 1024); if (period > max_period) period = max_period; -- cgit v1.2.3