From 0fb8125635e8eb5483fb095f98dcf0651206a7b8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 9 Jun 2020 22:04:44 +0200 Subject: video: fbdev: amba-clcd: Retire elder CLCD driver All the functionality in this driver has been reimplemented in the new DRM driver in drivers/gpu/drm/pl111/* and all the boards using it have been migrated to use the DRM driver with all configuration coming from the device tree. I started the work to migrate the CLCD driver to DRM in april 2017 and it took a little more than 3 years to do this properly without leaving any platforms behind. Reviewed-by: Eric Anholt Signed-off-by: Linus Walleij Cc: Russell King Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-2-linus.walleij@linaro.org --- include/linux/amba/clcd.h | 290 ---------------------------------------------- 1 file changed, 290 deletions(-) delete mode 100644 include/linux/amba/clcd.h (limited to 'include/linux/amba/clcd.h') diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h deleted file mode 100644 index b6e0cbeaf533..000000000000 --- a/include/linux/amba/clcd.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel. - * - * David A Rusling - * - * Copyright (C) 2001 ARM Limited - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ -#include -#include - -enum { - /* individual formats */ - CLCD_CAP_RGB444 = (1 << 0), - CLCD_CAP_RGB5551 = (1 << 1), - CLCD_CAP_RGB565 = (1 << 2), - CLCD_CAP_RGB888 = (1 << 3), - CLCD_CAP_BGR444 = (1 << 4), - CLCD_CAP_BGR5551 = (1 << 5), - CLCD_CAP_BGR565 = (1 << 6), - CLCD_CAP_BGR888 = (1 << 7), - - /* connection layouts */ - CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444, - CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551, - CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565, - CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888, - - /* red/blue ordering */ - CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 | - CLCD_CAP_RGB565 | CLCD_CAP_RGB888, - CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 | - CLCD_CAP_BGR565 | CLCD_CAP_BGR888, - - CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB, -}; - -struct backlight_device; - -struct clcd_panel { - struct fb_videomode mode; - signed short width; /* width in mm */ - signed short height; /* height in mm */ - u32 tim2; - u32 tim3; - u32 cntl; - u32 caps; - unsigned int bpp:8, - fixedtimings:1, - grayscale:1; - unsigned int connector; - struct backlight_device *backlight; - /* - * If the B/R lines are switched between the CLCD - * and the panel we need to know this and not try to - * compensate with the BGR bit in the control register. - */ - bool bgr_connection; -}; - -struct clcd_regs { - u32 tim0; - u32 tim1; - u32 tim2; - u32 tim3; - u32 cntl; - unsigned long pixclock; -}; - -struct clcd_fb; - -/* - * the board-type specific routines - */ -struct clcd_board { - const char *name; - - /* - * Optional. Hardware capability flags. - */ - u32 caps; - - /* - * Optional. Check whether the var structure is acceptable - * for this display. - */ - int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var); - - /* - * Compulsory. Decode fb->fb.var into regs->*. In the case of - * fixed timing, set regs->* to the register values required. - */ - void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs); - - /* - * Optional. Disable any extra display hardware. - */ - void (*disable)(struct clcd_fb *); - - /* - * Optional. Enable any extra display hardware. - */ - void (*enable)(struct clcd_fb *); - - /* - * Setup platform specific parts of CLCD driver - */ - int (*setup)(struct clcd_fb *); - - /* - * mmap the framebuffer memory - */ - int (*mmap)(struct clcd_fb *, struct vm_area_struct *); - - /* - * Remove platform specific parts of CLCD driver - */ - void (*remove)(struct clcd_fb *); -}; - -struct amba_device; -struct clk; - -/* this data structure describes each frame buffer device we find */ -struct clcd_fb { - struct fb_info fb; - struct amba_device *dev; - struct clk *clk; - struct clcd_panel *panel; - struct clcd_board *board; - void *board_data; - void __iomem *regs; - u16 off_ienb; - u16 off_cntl; - u32 clcd_cntl; - u32 cmap[16]; - bool clk_enabled; -}; - -static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs) -{ - struct fb_var_screeninfo *var = &fb->fb.var; - u32 val, cpl; - - /* - * Program the CLCD controller registers and start the CLCD - */ - val = ((var->xres / 16) - 1) << 2; - val |= (var->hsync_len - 1) << 8; - val |= (var->right_margin - 1) << 16; - val |= (var->left_margin - 1) << 24; - regs->tim0 = val; - - val = var->yres; - if (fb->panel->cntl & CNTL_LCDDUAL) - val /= 2; - val -= 1; - val |= (var->vsync_len - 1) << 10; - val |= var->lower_margin << 16; - val |= var->upper_margin << 24; - regs->tim1 = val; - - val = fb->panel->tim2; - val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS; - val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS; - - cpl = var->xres_virtual; - if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */ - /* / 1 */; - else if (!var->grayscale) /* STN color */ - cpl = cpl * 8 / 3; - else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */ - cpl /= 8; - else /* STN monochrome, 4bit */ - cpl /= 4; - - regs->tim2 = val | ((cpl - 1) << 16); - - regs->tim3 = fb->panel->tim3; - - val = fb->panel->cntl; - if (var->grayscale) - val |= CNTL_LCDBW; - - if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) { - /* - * if board and panel supply capabilities, we can support - * changing BGR/RGB depending on supplied parameters. Here - * we switch to what the framebuffer is providing if need - * be, so if the framebuffer is BGR but the display connection - * is RGB (first case) we switch it around. Vice versa mutatis - * mutandis if the framebuffer is RGB but the display connection - * is BGR, we flip it around. - */ - if (var->red.offset == 0) - val &= ~CNTL_BGR; - else - val |= CNTL_BGR; - if (fb->panel->bgr_connection) - val ^= CNTL_BGR; - } - - switch (var->bits_per_pixel) { - case 1: - val |= CNTL_LCDBPP1; - break; - case 2: - val |= CNTL_LCDBPP2; - break; - case 4: - val |= CNTL_LCDBPP4; - break; - case 8: - val |= CNTL_LCDBPP8; - break; - case 16: - /* - * PL110 cannot choose between 5551 and 565 modes in its - * control register. It is possible to use 565 with - * custom external wiring. - */ - if (amba_part(fb->dev) == 0x110 || - var->green.length == 5) - val |= CNTL_LCDBPP16; - else if (var->green.length == 6) - val |= CNTL_LCDBPP16_565; - else - val |= CNTL_LCDBPP16_444; - break; - case 32: - val |= CNTL_LCDBPP24; - break; - } - - regs->cntl = val; - regs->pixclock = var->pixclock; -} - -static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) -{ - var->xres_virtual = var->xres = (var->xres + 15) & ~15; - var->yres_virtual = var->yres = (var->yres + 1) & ~1; - -#define CHECK(e,l,h) (var->e < l || var->e > h) - if (CHECK(right_margin, (5+1), 256) || /* back porch */ - CHECK(left_margin, (5+1), 256) || /* front porch */ - CHECK(hsync_len, (5+1), 256) || - var->xres > 4096 || - var->lower_margin > 255 || /* back porch */ - var->upper_margin > 255 || /* front porch */ - var->vsync_len > 32 || - var->yres > 1024) - return -EINVAL; -#undef CHECK - - /* single panel mode: PCD = max(PCD, 1) */ - /* dual panel mode: PCD = max(PCD, 5) */ - - /* - * You can't change the grayscale setting, and - * we can only do non-interlaced video. - */ - if (var->grayscale != fb->fb.var.grayscale || - (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) - return -EINVAL; - -#define CHECK(e) (var->e != fb->fb.var.e) - if (fb->panel->fixedtimings && - (CHECK(xres) || - CHECK(yres) || - CHECK(bits_per_pixel) || - CHECK(pixclock) || - CHECK(left_margin) || - CHECK(right_margin) || - CHECK(upper_margin) || - CHECK(lower_margin) || - CHECK(hsync_len) || - CHECK(vsync_len) || - CHECK(sync))) - return -EINVAL; -#undef CHECK - - var->nonstd = 0; - var->accel_flags = 0; - - return 0; -} -- cgit v1.2.3