From fb4b441c5d764813370e381310d9f82b38e7cd3f Mon Sep 17 00:00:00 2001 From: Mordechay Goodstein Date: Wed, 1 Mar 2023 12:09:19 +0200 Subject: wifi: wireless: correct primary channel validation on 6 GHz The check that beacon primary channel is in the range of 80 MHz (abs < 80) is invalid for 320 MHz since duplicate beacon transmit means that the AP transmits it on all the 20 MHz sub-channels: 9.4.2.249 HE Operation element - ... AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth. So in case of 320 MHz the DUP beacon can be in upper 160 for primary channel in the lower 160 giving possibly an absolute range of over 80 MHz. Also this check is redundant alltogether, if AP has a wrong primary channel in the beacon it's a faulty AP, and we would fail in next steps to connect. While at it, fix the frequency comparison to no longer compare between KHz and MHz, which was introduced by commit 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel"). Signed-off-by: Mordechay Goodstein Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230301115906.314faf725255.I5e27251ac558297553b590d3917a7b6d1aae0e74@changeid Signed-off-by: Johannes Berg --- net/wireless/scan.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 72e9af6158ef..c23709d852bc 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1886,22 +1886,21 @@ cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen, freq = ieee80211_channel_to_freq_khz(channel_number, channel->band); /* - * In 6GHz, duplicated beacon indication is relevant for - * beacons only. + * Frame info (beacon/prob res) is the same as received channel, + * no need for further processing. */ - if (channel->band == NL80211_BAND_6GHZ && - (freq == channel->center_freq || - abs(freq - channel->center_freq) > 80)) + if (freq == ieee80211_channel_to_khz(channel)) return channel; alt_channel = ieee80211_get_channel_khz(wiphy, freq); if (!alt_channel) { - if (channel->band == NL80211_BAND_2GHZ) { + if (channel->band == NL80211_BAND_2GHZ || + channel->band == NL80211_BAND_6GHZ) { /* * Better not allow unexpected channels when that could * be going beyond the 1-11 range (e.g., discovering * BSS on channel 12 when radio is configured for - * channel 11. + * channel 11) or beyond the 6 GHz channel range. */ return NULL; } -- cgit v1.2.3