From c3c63b6bec3135e814fa07d30d57a253f41d53de Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 18 Sep 2009 12:49:36 -0700 Subject: kbuild: echo the record_mcount command I had some problems with record_mcount in the Makefile and it was hard to track down. Echo it by default to make it easier to diagnose. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/Makefile.build | 1 + 1 file changed, 1 insertion(+) (limited to 'scripts/Makefile.build') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 5c4b7a400c18..83eef0a82d96 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -216,6 +216,7 @@ define rule_cc_o_c $(call echo-cmd,checksrc) $(cmd_checksrc) \ $(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \ $(cmd_modversions) \ + $(call echo-cmd,record_mcount) \ $(cmd_record_mcount) \ scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ $(dot-target).tmp; \ -- cgit v1.2.3 From 66a570623be0d96130470a41cd38bce889b7e885 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 18 Sep 2009 12:49:37 -0700 Subject: kbuild: fail build if recordmcount.pl fails When this script fails the build should fail too. Otherwise there are mysterious build failures later. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg --- scripts/Makefile.build | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'scripts/Makefile.build') diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 83eef0a82d96..6e41b3b6b154 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -206,7 +206,7 @@ cmd_modversions = \ endif ifdef CONFIG_FTRACE_MCOUNT_RECORD -cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ +cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \ "$(if $(CONFIG_64BIT),64,32)" \ "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \ "$(if $(part-of-module),1,0)" "$(@)"; -- cgit v1.2.3 From 51b563fc93c8cb5bff1d67a0a71c374e4a4ea049 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 20 Sep 2009 12:28:22 +0200 Subject: arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre Cc: Russell King Cc: Mikael Starvik Cc: Jesper Nilsson Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: "David S. Miller" Cc: Jeff Dike Cc: Chris Zankel Signed-off-by: Sam Ravnborg --- Makefile | 5 ----- arch/arm/Makefile | 2 +- arch/arm/kernel/Makefile | 3 ++- arch/cris/Makefile | 2 -- arch/cris/kernel/Makefile | 1 + arch/mips/Makefile | 27 +++------------------------ arch/mips/kernel/vmlinux.lds.S | 13 +++++++++++-- arch/powerpc/Makefile | 2 -- arch/sparc/Makefile | 4 ---- arch/sparc/kernel/Makefile | 6 +++++- arch/um/Makefile | 9 ++++----- arch/um/kernel/Makefile | 3 +++ arch/um/kernel/vmlinux.lds.S | 3 +++ arch/xtensa/kernel/Makefile | 3 ++- scripts/Makefile.build | 3 ++- 15 files changed, 37 insertions(+), 49 deletions(-) (limited to 'scripts/Makefile.build') diff --git a/Makefile b/Makefile index 5e1e74c9976c..f908accd332b 100644 --- a/Makefile +++ b/Makefile @@ -1027,11 +1027,6 @@ prepare0: archprepare FORCE # All the preparing.. prepare: prepare0 -# Leave this as default for preprocessing vmlinux.lds.S, which is now -# done in arch/$(ARCH)/kernel/Makefile - -export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) - # The asm symlink changes when $(ARCH) changes. # Detect this and ask user to run make mrproper # If asm is a stale symlink (point to dir that does not exist) remove it diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 68c6ab0749da..c695fdac5b30 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -14,7 +14,7 @@ LDFLAGS_vmlinux :=-p --no-undefined -X ifeq ($(CONFIG_CPU_ENDIAN_BE8),y) LDFLAGS_vmlinux += --be8 endif -CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET) + OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 3213c9382b17..c446aeff7b89 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -2,7 +2,8 @@ # Makefile for the linux kernel. # -AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) +AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) ifdef CONFIG_DYNAMIC_FTRACE CFLAGS_REMOVE_ftrace.o = -pg diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 71e17d3eeddb..29c2ceb38a76 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -42,8 +42,6 @@ LD = $(CROSS_COMPILE)ld -mcrislinux OBJCOPYFLAGS := -O binary -R .note -R .comment -S -CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) - KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc) KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc) KBUILD_CPPFLAGS += $(inc) diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile index ee7bcd4d20b2..b45640b3e600 100644 --- a/arch/cris/kernel/Makefile +++ b/arch/cris/kernel/Makefile @@ -3,6 +3,7 @@ # Makefile for the linux kernel. # +CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE) extra-y := vmlinux.lds obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o diff --git a/arch/mips/Makefile b/arch/mips/Makefile index c825b14b4ed0..77f5021218d3 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -627,16 +627,6 @@ endif cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ -ifdef CONFIG_32BIT -ifdef CONFIG_CPU_LITTLE_ENDIAN -JIFFIES = jiffies_64 -else -JIFFIES = jiffies_64 + 4 -endif -else -JIFFIES = jiffies_64 -endif - # # Automatically detect the build format. By default we choose # the elf format according to the load address. @@ -660,8 +650,9 @@ ifdef CONFIG_64BIT endif KBUILD_AFLAGS += $(cflags-y) -KBUILD_CFLAGS += $(cflags-y) \ - -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)" +KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" LDFLAGS += -m $(ld-emul) @@ -676,18 +667,6 @@ endif OBJCOPYFLAGS += --remove-section=.reginfo -# -# Choosing incompatible machines durings configuration will result in -# error messages during linking. Select a default linkscript if -# none has been choosen above. -# - -CPPFLAGS_vmlinux.lds := \ - $(KBUILD_CFLAGS) \ - -D"LOADADDR=$(load-y)" \ - -D"JIFFIES=$(JIFFIES)" \ - -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)" - head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o libs-y += arch/mips/lib/ diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 2769bed3d2af..9bf0e3df7c5a 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -10,7 +10,16 @@ PHDRS { text PT_LOAD FLAGS(7); /* RWX */ note PT_NOTE FLAGS(4); /* R__ */ } -jiffies = JIFFIES; + +ifdef CONFIG_32BIT + ifdef CONFIG_CPU_LITTLE_ENDIAN + jiffies = jiffies_64; + else + jiffies = jiffies_64 + 4; + endif +else + jiffies = jiffies_64; +endif SECTIONS { @@ -29,7 +38,7 @@ SECTIONS /* . = 0xa800000000300000; */ . = 0xffffffff80300000; #endif - . = LOADADDR; + . = VMLINUX_LOAD_ADDRESS; /* read-only */ _text = .; /* Text and read-only data */ .text : { diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 13e3fd852d63..aacf629c1a9f 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -158,8 +158,6 @@ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ # Default to zImage, override when needed all: zImage -CPPFLAGS_vmlinux.lds := -Upowerpc - BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.% PHONY += $(BOOT_TARGETS) diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 467221dd5702..dfe272d14465 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -31,7 +31,6 @@ export BITS := 32 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7 KBUILD_AFLAGS += -m32 -CPPFLAGS_vmlinux.lds += -m32 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000 # Since 2.5.40, the first stage is left not btfix-ed. @@ -45,9 +44,6 @@ else CHECKFLAGS += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64 -# Undefine sparc when processing vmlinux.lds - it is used -# And teach CPP we are doing 64 bit builds (for this case) -CPPFLAGS_vmlinux.lds += -m64 -Usparc LDFLAGS := -m elf64_sparc export BITS := 64 diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 247cc620cee5..96aad394cd30 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -7,7 +7,11 @@ ccflags-y := -Werror extra-y := head_$(BITS).o extra-y += init_task.o -extra-y += vmlinux.lds + +# Undefine sparc when processing vmlinux.lds - it is used +# And teach CPP we are doing $(BITS) builds (for this case) +CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS) +extra-y += vmlinux.lds obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o obj-$(CONFIG_SPARC32) += etrap_32.o diff --git a/arch/um/Makefile b/arch/um/Makefile index 0728def32234..fc633dbacf84 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -96,11 +96,10 @@ CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) $(call cc-option, -fno-stack-protector,) \ $(call cc-option, -fno-stack-protector-all,) -CONFIG_KERNEL_STACK_ORDER ?= 2 -STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] ) - -CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \ - -DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE) +# Options used by linker script +export LDS_START := $(START) +export LDS_ELF_ARCH := $(ELF_ARCH) +export LDS_ELF_FORMAT := $(ELF_FORMAT) # The wrappers will select whether using "malloc" or the kernel allocator. LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 388ec0a3ea9b..1119233597a1 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -3,6 +3,9 @@ # Licensed under the GPL # +CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \ + -DELF_ARCH=$(LDS_ELF_ARCH) \ + -DELF_FORMAT=$(LDS_ELF_FORMAT) extra-y := vmlinux.lds clean-files := diff --git a/arch/um/kernel/vmlinux.lds.S b/arch/um/kernel/vmlinux.lds.S index f8aeb448aab6..16e49bfa2b42 100644 --- a/arch/um/kernel/vmlinux.lds.S +++ b/arch/um/kernel/vmlinux.lds.S @@ -1,3 +1,6 @@ + +KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER); + #ifdef CONFIG_LD_SCRIPT_STATIC #include "uml.lds.S" #else diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index fe3186de6a33..6f56d95f2c1e 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -27,7 +27,8 @@ sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \ -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g' quiet_cmd__cpp_lds_S = LDS $@ - cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@ + cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \ + | sed $(sed-y) >$@ $(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE $(call if_changed_dep,_cpp_lds_S) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 6e41b3b6b154..d5425660a3df 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -270,7 +270,8 @@ targets += $(extra-y) $(MAKECMDGOALS) $(always) # Linker scripts preprocessor (.lds.S -> .lds) # --------------------------------------------------------------------------- quiet_cmd_cpp_lds_S = LDS $@ - cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $< + cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ + -D__ASSEMBLY__ -o $@ $< $(obj)/%.lds: $(src)/%.lds.S FORCE $(call if_changed_dep,cpp_lds_S) -- cgit v1.2.3 From 42f29a25207dc7b3051d299cc028d4b395d1328d Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sun, 20 Sep 2009 18:14:12 -0400 Subject: kbuild: Don't define ALIGN and ENTRY when preprocessing linker scripts. Adding a reference to to x86's causes the x86 linker script to have syntax errors, because the ALIGN and ENTRY keywords get redefined to the assembly implementations of those. One could fix this by adjusting the include structure, but I think any solution based on that approach would be fragile. Currently, it is impossible when writing a header to do something different for assembly files and linker scripts, even though there are clearly cases where one wants them to define macros differently for the two (ENTRY being an excellent example). So I think the right solution here is to introduce a new preprocessor definition, called LINKER_SCRIPT that is set along with __ASSEMBLY__ for linker scripts, and to use that to not define ALIGN and ENTRY in linker scripts. I suspect we'll find other uses for this mechanism in the future. Signed-off-by: Tim Abbott Signed-off-by: Sam Ravnborg --- include/linux/linkage.h | 2 ++ scripts/Makefile.build | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'scripts/Makefile.build') diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 691f59171c6c..5126cceb6ae9 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -57,6 +57,7 @@ #ifdef __ASSEMBLY__ +#ifndef LINKER_SCRIPT #define ALIGN __ALIGN #define ALIGN_STR __ALIGN_STR @@ -66,6 +67,7 @@ ALIGN; \ name: #endif +#endif /* LINKER_SCRIPT */ #ifndef WEAK #define WEAK(name) \ diff --git a/scripts/Makefile.build b/scripts/Makefile.build index d5425660a3df..341b58902ffc 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -271,7 +271,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(always) # --------------------------------------------------------------------------- quiet_cmd_cpp_lds_S = LDS $@ cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \ - -D__ASSEMBLY__ -o $@ $< + -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $< $(obj)/%.lds: $(src)/%.lds.S FORCE $(call if_changed_dep,cpp_lds_S) -- cgit v1.2.3