From 0e4c2b6b0c4a4b4014d9424c27e5e79d185229c5 Mon Sep 17 00:00:00 2001 From: Matus Gajdos Date: Wed, 19 Jul 2023 18:47:29 +0200 Subject: ASoC: fsl_spdif: Silence output on stop Clear TX registers on stop to prevent the SPDIF interface from sending last written word over and over again. Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver") Signed-off-by: Matus Gajdos Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com Signed-off-by: Mark Brown --- sound/soc/fsl/fsl_spdif.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 015c3708aa04..3fd26f2cdd60 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -751,6 +751,8 @@ static int fsl_spdif_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_PAUSE_PUSH: regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0); regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0); + regmap_write(regmap, REG_SPDIF_STL, 0x0); + regmap_write(regmap, REG_SPDIF_STR, 0x0); break; default: return -EINVAL; -- cgit v1.2.3 From 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 Mon Sep 17 00:00:00 2001 From: Dmytro Maluka Date: Mon, 17 Jul 2023 21:37:36 +0200 Subject: ASoC: da7219: Flush pending AAD IRQ when suspending da7219_aad_suspend() disables jack detection, which should prevent generating new interrupts by DA7219 while suspended. However, there is a theoretical possibility that there is a pending interrupt generated just before suspending DA7219 and not handled yet, so the IRQ handler may still run after DA7219 is suspended. To prevent that, wait until the pending IRQ handling is done. This patch arose as an attempt to fix the following I2C failure occurring sometimes during system suspend or resume: [ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] which indicates that the AAD IRQ handler is unexpectedly running when DA7219 is suspended, and as a result, is trying to read data from DA7219 over I2C and is hitting the I2C driver "Transfer while suspended" failure. However, with this patch the above failure is still reproducible. So this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an IRQ unexpectedly generated after jack detection is already disabled. Signed-off-by: Dmytro Maluka Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.com Signed-off-by: Mark Brown --- sound/soc/codecs/da7219-aad.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index c65256bd526d..202715b7bbea 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -944,6 +944,8 @@ void da7219_aad_suspend(struct snd_soc_component *component) } } } + + synchronize_irq(da7219_aad->irq); } void da7219_aad_resume(struct snd_soc_component *component) -- cgit v1.2.3 From f0691dc16206f21b13c464434366e2cd632b8ed7 Mon Sep 17 00:00:00 2001 From: Dmytro Maluka Date: Mon, 17 Jul 2023 21:37:37 +0200 Subject: ASoC: da7219: Check for failure reading AAD IRQ events When handling an AAD interrupt, if IRQ events read failed (for example, due to i2c "Transfer while suspended" failure, i.e. when attempting to read it while DA7219 is suspended, which may happen due to a spurious AAD interrupt), the events array contains garbage uninitialized values. So instead of trying to interprete those values and doing any actions based on them (potentially resulting in misbehavior, e.g. reporting bogus events), refuse to handle the interrupt. Signed-off-by: Dmytro Maluka Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.com Signed-off-by: Mark Brown --- sound/soc/codecs/da7219-aad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'sound') diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 202715b7bbea..581b334a6631 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -361,11 +361,15 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data) struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component); u8 events[DA7219_AAD_IRQ_REG_MAX]; u8 statusa; - int i, report = 0, mask = 0; + int i, ret, report = 0, mask = 0; /* Read current IRQ events */ - regmap_bulk_read(da7219->regmap, DA7219_ACCDET_IRQ_EVENT_A, - events, DA7219_AAD_IRQ_REG_MAX); + ret = regmap_bulk_read(da7219->regmap, DA7219_ACCDET_IRQ_EVENT_A, + events, DA7219_AAD_IRQ_REG_MAX); + if (ret) { + dev_warn_ratelimited(component->dev, "Failed to read IRQ events: %d\n", ret); + return IRQ_NONE; + } if (!events[DA7219_AAD_IRQ_REG_A] && !events[DA7219_AAD_IRQ_REG_B]) return IRQ_NONE; -- cgit v1.2.3 From 1bc40efdaf4a0ccfdb10a1c8e4b458f4764e8e5f Mon Sep 17 00:00:00 2001 From: Edson Juliano Drosdeck Date: Wed, 19 Jul 2023 17:02:41 -0300 Subject: ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect Add a quirk mechanism to allow specifying that active-high jack-detection should be used on platforms where this info is not available in devicetree. And add an entry for the Positivo CW14Q01P-V2 to the DMI table, so that jack-detection will work properly on this laptop. Signed-off-by: Edson Juliano Drosdeck Link: https://lore.kernel.org/r/20230719200241.4865-1-edson.drosdeck@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/nau8821.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/nau8821.c b/sound/soc/codecs/nau8821.c index 96d75882b33a..ca6beb2d2649 100644 --- a/sound/soc/codecs/nau8821.c +++ b/sound/soc/codecs/nau8821.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,13 @@ #include #include "nau8821.h" +#define NAU8821_JD_ACTIVE_HIGH BIT(0) + +static int nau8821_quirk; +static int quirk_override = -1; +module_param_named(quirk, quirk_override, uint, 0444); +MODULE_PARM_DESC(quirk, "Board-specific quirk override"); + #define NAU_FREF_MAX 13500000 #define NAU_FVCO_MAX 100000000 #define NAU_FVCO_MIN 90000000 @@ -1792,6 +1800,33 @@ static int nau8821_setup_irq(struct nau8821 *nau8821) return 0; } +/* Please keep this list alphabetically sorted */ +static const struct dmi_system_id nau8821_quirk_table[] = { + { + /* Positivo CW14Q01P-V2 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Positivo Tecnologia SA"), + DMI_MATCH(DMI_BOARD_NAME, "CW14Q01P-V2"), + }, + .driver_data = (void *)(NAU8821_JD_ACTIVE_HIGH), + }, + {} +}; + +static void nau8821_check_quirks(void) +{ + const struct dmi_system_id *dmi_id; + + if (quirk_override != -1) { + nau8821_quirk = quirk_override; + return; + } + + dmi_id = dmi_first_match(nau8821_quirk_table); + if (dmi_id) + nau8821_quirk = (unsigned long)dmi_id->driver_data; +} + static int nau8821_i2c_probe(struct i2c_client *i2c) { struct device *dev = &i2c->dev; @@ -1812,6 +1847,12 @@ static int nau8821_i2c_probe(struct i2c_client *i2c) nau8821->dev = dev; nau8821->irq = i2c->irq; + + nau8821_check_quirks(); + + if (nau8821_quirk & NAU8821_JD_ACTIVE_HIGH) + nau8821->jkdet_polarity = 0; + nau8821_print_device_properties(nau8821); nau8821_reset_chip(nau8821->regmap); -- cgit v1.2.3 From f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 23 Jul 2023 00:27:22 +0100 Subject: ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register The WM8904_ADC_TEST_0 register is modified as part of updating the OSR controls but does not have a cache default, leading to errors when we try to modify these controls in cache only mode with no prior read: wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16 Add a read of the register to probe() to fill the cache and avoid both the error messages and the misconfiguration of the chip which will result. Acked-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/wm8904.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'sound') diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 068e610b1b4c..f2baee7c332e 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -2308,6 +2308,9 @@ static int wm8904_i2c_probe(struct i2c_client *i2c) regmap_update_bits(wm8904->regmap, WM8904_BIAS_CONTROL_0, WM8904_POBCTRL, 0); + /* Fill the cache for the ADC test register */ + regmap_read(wm8904->regmap, WM8904_ADC_TEST_0, &val); + /* Can leave the device powered off until we need it */ regcache_cache_only(wm8904->regmap, true); regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies); -- cgit v1.2.3 From 02fb23d72720df2b6be3f29fc5787ca018eb92c3 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 21 Jul 2023 17:06:43 +0800 Subject: ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0 When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan Reported-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230721090643.128213-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt5682-sdw.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c index 67404f45389f..4968a8c0064d 100644 --- a/sound/soc/codecs/rt5682-sdw.c +++ b/sound/soc/codecs/rt5682-sdw.c @@ -750,8 +750,15 @@ static int __maybe_unused rt5682_dev_resume(struct device *dev) if (!rt5682->first_hw_init) return 0; - if (!slave->unattach_request) + if (!slave->unattach_request) { + if (rt5682->disable_irq == true) { + mutex_lock(&rt5682->disable_irq_lock); + sdw_write_no_pm(slave, SDW_SCP_INTMASK1, SDW_SCP_INT1_IMPL_DEF); + rt5682->disable_irq = false; + mutex_unlock(&rt5682->disable_irq_lock); + } goto regmap_sync; + } time = wait_for_completion_timeout(&slave->initialization_complete, msecs_to_jiffies(RT5682_PROBE_TIMEOUT)); -- cgit v1.2.3 From d20d35d1ad62c6cca36368c1e8f29335a068659e Mon Sep 17 00:00:00 2001 From: Edgar Date: Wed, 19 Jul 2023 13:47:22 +0800 Subject: ASoc: codecs: ES8316: Fix DMIC config According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 } Signed-off-by: Edgar Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.com Signed-off-by: Mark Brown --- sound/soc/codecs/es8316.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 34cf60769b62..65e497b455d3 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -153,7 +153,7 @@ static const char * const es8316_dmic_txt[] = { "dmic data at high level", "dmic data at low level", }; -static const unsigned int es8316_dmic_values[] = { 0, 1, 2 }; +static const unsigned int es8316_dmic_values[] = { 0, 2, 3 }; static const struct soc_enum es8316_dmic_src_enum = SOC_VALUE_ENUM_SINGLE(ES8316_ADC_DMIC, 0, 3, ARRAY_SIZE(es8316_dmic_txt), -- cgit v1.2.3 From 7a8735c1551e489351172d0da96128f6f8b52b2d Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 21 Jul 2023 17:07:21 +0800 Subject: ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0 When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan Reported-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230721090721.128264-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt712-sdca-sdw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt712-sdca-sdw.c b/sound/soc/codecs/rt712-sdca-sdw.c index ad06267b0ea0..6bc50396a0f6 100644 --- a/sound/soc/codecs/rt712-sdca-sdw.c +++ b/sound/soc/codecs/rt712-sdca-sdw.c @@ -438,8 +438,16 @@ static int __maybe_unused rt712_sdca_dev_resume(struct device *dev) if (!rt712->first_hw_init) return 0; - if (!slave->unattach_request) + if (!slave->unattach_request) { + if (rt712->disable_irq == true) { + mutex_lock(&rt712->disable_irq_lock); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK1, SDW_SCP_SDCA_INTMASK_SDCA_0); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK2, SDW_SCP_SDCA_INTMASK_SDCA_8); + rt712->disable_irq = false; + mutex_unlock(&rt712->disable_irq_lock); + } goto regmap_sync; + } time = wait_for_completion_timeout(&slave->initialization_complete, msecs_to_jiffies(RT712_PROBE_TIMEOUT)); -- cgit v1.2.3 From a0b7c59ac1a9bae015a9b90dfda28158586006c8 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 21 Jul 2023 17:07:32 +0800 Subject: ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0 When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan Reported-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230721090732.128282-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt722-sdca-sdw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt722-sdca-sdw.c b/sound/soc/codecs/rt722-sdca-sdw.c index cc57e4e27805..e9103ffb3f50 100644 --- a/sound/soc/codecs/rt722-sdca-sdw.c +++ b/sound/soc/codecs/rt722-sdca-sdw.c @@ -463,8 +463,16 @@ static int __maybe_unused rt722_sdca_dev_resume(struct device *dev) if (!rt722->first_hw_init) return 0; - if (!slave->unattach_request) + if (!slave->unattach_request) { + if (rt722->disable_irq == true) { + mutex_lock(&rt722->disable_irq_lock); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK1, SDW_SCP_SDCA_INTMASK_SDCA_6); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK2, SDW_SCP_SDCA_INTMASK_SDCA_8); + rt722->disable_irq = false; + mutex_unlock(&rt722->disable_irq_lock); + } goto regmap_sync; + } time = wait_for_completion_timeout(&slave->initialization_complete, msecs_to_jiffies(RT722_PROBE_TIMEOUT)); -- cgit v1.2.3 From b69de265bd0e877015a00fbba453ef72af162e0f Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 21 Jul 2023 17:06:54 +0800 Subject: ASoC: rt711: fix for JD event handling in ClockStop Mode0 When the system suspends, peripheral Imp-defined interrupt is disabled. When system level resume is invoked, the peripheral Imp-defined interrupts should be enabled to handle JD events. Signed-off-by: Shuming Fan Reported-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230721090654.128230-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt711-sdw.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt711-sdw.c b/sound/soc/codecs/rt711-sdw.c index 87dafcb4545d..33dced388f9e 100644 --- a/sound/soc/codecs/rt711-sdw.c +++ b/sound/soc/codecs/rt711-sdw.c @@ -538,8 +538,15 @@ static int __maybe_unused rt711_dev_resume(struct device *dev) if (!rt711->first_hw_init) return 0; - if (!slave->unattach_request) + if (!slave->unattach_request) { + if (rt711->disable_irq == true) { + mutex_lock(&rt711->disable_irq_lock); + sdw_write_no_pm(slave, SDW_SCP_INTMASK1, SDW_SCP_INT1_IMPL_DEF); + rt711->disable_irq = false; + mutex_unlock(&rt711->disable_irq_lock); + } goto regmap_sync; + } time = wait_for_completion_timeout(&slave->initialization_complete, msecs_to_jiffies(RT711_PROBE_TIMEOUT)); -- cgit v1.2.3 From 23adeb7056acd4fd866969f4afb91441776cc4f5 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Fri, 21 Jul 2023 17:07:11 +0800 Subject: ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0 When the system suspends, peripheral SDCA interrupts are disabled. When system level resume is invoked, the peripheral SDCA interrupts should be enabled to handle JD events. Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied. Signed-off-by: Shuming Fan Reported-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20230721090711.128247-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt711-sdca-sdw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c index 119e1f9605d7..23f23f714b39 100644 --- a/sound/soc/codecs/rt711-sdca-sdw.c +++ b/sound/soc/codecs/rt711-sdca-sdw.c @@ -438,8 +438,16 @@ static int __maybe_unused rt711_sdca_dev_resume(struct device *dev) if (!rt711->first_hw_init) return 0; - if (!slave->unattach_request) + if (!slave->unattach_request) { + if (rt711->disable_irq == true) { + mutex_lock(&rt711->disable_irq_lock); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK1, SDW_SCP_SDCA_INTMASK_SDCA_0); + sdw_write_no_pm(slave, SDW_SCP_SDCA_INTMASK2, SDW_SCP_SDCA_INTMASK_SDCA_8); + rt711->disable_irq = false; + mutex_unlock(&rt711->disable_irq_lock); + } goto regmap_sync; + } time = wait_for_completion_timeout(&slave->initialization_complete, msecs_to_jiffies(RT711_PROBE_TIMEOUT)); -- cgit v1.2.3 From f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 Mon Sep 17 00:00:00 2001 From: Guiting Shen Date: Sat, 15 Jul 2023 11:06:20 +0800 Subject: ASoC: atmel: Fix the 8K sample parameter in I2SC master The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary). So use the 6.144Mhz instead of 12.288Mhz to support 8K sample. Signed-off-by: Guiting Shen Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com Signed-off-by: Mark Brown --- sound/soc/atmel/atmel-i2s.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c index 49930baf5e4d..69a88dc65165 100644 --- a/sound/soc/atmel/atmel-i2s.c +++ b/sound/soc/atmel/atmel-i2s.c @@ -163,11 +163,14 @@ struct atmel_i2s_gck_param { #define I2S_MCK_12M288 12288000UL #define I2S_MCK_11M2896 11289600UL +#define I2S_MCK_6M144 6144000UL /* mck = (32 * (imckfs+1) / (imckdiv+1)) * fs */ static const struct atmel_i2s_gck_param gck_params[] = { + /* mck = 6.144Mhz */ + { 8000, I2S_MCK_6M144, 1, 47}, /* mck = 768 fs */ + /* mck = 12.288MHz */ - { 8000, I2S_MCK_12M288, 0, 47}, /* mck = 1536 fs */ { 16000, I2S_MCK_12M288, 1, 47}, /* mck = 768 fs */ { 24000, I2S_MCK_12M288, 3, 63}, /* mck = 512 fs */ { 32000, I2S_MCK_12M288, 3, 47}, /* mck = 384 fs */ -- cgit v1.2.3