# SPDX-License-Identifier: GPL-2.0-only %YAML 1.2 --- $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SPMI PMICs multi-function device description: | Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced to the chip via the SPMI (System Power Management Interface) bus. Support for multiple independent functions are implemented by splitting the 16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes each. A function can consume one or more of these fixed-size register regions. The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other PMICs. These PMICs use a "QPNP" scheme through SPMI interface. QPNP is effectively a partitioning scheme for dividing the SPMI extended register space up into logical pieces, and set of fixed register locations/definitions within these regions, with some of these regions specifically used for interrupt handling. maintainers: - Stephen Boyd properties: $nodename: oneOf: - pattern: '^pmic@.*$' - pattern: '^pm(a|s)?[0-9]*@.*$' deprecated: true compatible: items: - enum: - qcom,pm660 - qcom,pm660l - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 - qcom,pm8019 - qcom,pm8110 - qcom,pm8150 - qcom,pm8150b - qcom,pm8150l - qcom,pm8226 - qcom,pm8350 - qcom,pm8350b - qcom,pm8350c - qcom,pm8841 - qcom,pm8909 - qcom,pm8916 - qcom,pm8941 - qcom,pm8950 - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 - qcom,pmd9635 - qcom,pmi8950 - qcom,pmi8962 - qcom,pmi8994 - qcom,pmi8998 - qcom,pmk8350 - qcom,pmm8155au - qcom,pmr735a - qcom,pmr735b - qcom,pms405 - qcom,pmx55 - qcom,pmx65 - qcom,smb2351 - const: qcom,spmi-pmic reg: minItems: 1 maxItems: 2 '#address-cells': const: 1 '#size-cells': const: 0 labibb: type: object $ref: /schemas/regulator/qcom-labibb-regulator.yaml# regulators: type: object $ref: /schemas/regulator/regulator.yaml# patternProperties: "^adc@[0-9a-f]+$": type: object $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# "^adc-tm@[0-9a-f]+$": type: object $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# "^audio-codec@[0-9a-f]+$": type: object additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet "extcon@[0-9a-f]+$": type: object $ref: /schemas/extcon/qcom,pm8941-misc.yaml# "gpio(s)?@[0-9a-f]+$": type: object $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# "pon@[0-9a-f]+$": type: object $ref: /schemas/power/reset/qcom,pon.yaml# "pwm@[0-9a-f]+$": type: object $ref: /schemas/leds/leds-qcom-lpg.yaml# "^rtc@[0-9a-f]+$": type: object $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# "^temp-alarm@[0-9a-f]+$": type: object $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# "^vibrator@[0-9a-f]+$": type: object additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet "^mpps@[0-9a-f]+$": type: object $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# "(.*)?(wled|leds)@[0-9a-f]+$": type: object $ref: /schemas/leds/backlight/qcom-wled.yaml# unevaluatedProperties: false required: - compatible - reg additionalProperties: false examples: - | #include #include #include spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0c440000 0x1100>, <0x0c600000 0x2000000>, <0x0e600000 0x100000>, <0x0e700000 0xa0000>, <0x0c40a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; pmi8998_lsid0: pmic@2 { compatible = "qcom,pmi8998", "qcom,spmi-pmic"; reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pmi8998_gpio: gpios@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; gpio-ranges = <&pmi8998_gpio 0 0 14>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; };