/* * Device Tree Source for the Koelsch board * * Copyright (C) 2013 Renesas Electronics Corporation * Copyright (C) 2013 Renesas Solutions Corp. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ /dts-v1/; #include "r8a7791.dtsi" #include / { model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; memory@200000000 { device_type = "memory"; reg = <2 0x00000000 0 0x40000000>; }; lbsc { #address-cells = <1>; #size-cells = <1>; }; gpio-keys { compatible = "gpio-keys"; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; linux,code = <30>; label = "SW30"; gpio-key,wakeup; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <48>; label = "SW31"; gpio-key,wakeup; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; linux,code = <46>; label = "SW32"; gpio-key,wakeup; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; linux,code = <32>; label = "SW33"; gpio-key,wakeup; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; linux,code = <18>; label = "SW34"; gpio-key,wakeup; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; linux,code = <33>; label = "SW35"; gpio-key,wakeup; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; linux,code = <34>; label = "SW36"; gpio-key,wakeup; debounce-interval = <20>; }; }; leds { compatible = "gpio-leds"; led6 { gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; }; led7 { gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; }; led8 { gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; }; }; }; &extal_clk { clock-frequency = <20000000>; }; &pfc { pinctrl-0 = <&scif0_pins &scif1_pins>; pinctrl-names = "default"; scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; scif1_pins: serial1 { renesas,groups = "scif1_data_d"; renesas,function = "scif1"; }; qspi_pins: spi { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; }; &sata0 { status = "okay"; }; &spi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; status = "okay"; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; m25p,fast-read; partition@0 { label = "loader"; reg = <0x00000000 0x00080000>; read-only; }; partition@80000 { label = "bootenv"; reg = <0x00080000 0x00080000>; read-only; }; partition@100000 { label = "data"; reg = <0x00100000 0x03f00000>; }; }; };