// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
/*
 * Copyright 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
 * D-82229 Seefeld, Germany.
 * Author: Alexander Stein
 */

#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>

/ {
	adc {
		compatible = "iio-hwmon";
		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>;
	};

	aliases {
		rtc0 = &pcf85063;
		rtc1 = &rtc;
	};

	backlight_lvds: backlight-lvds {
		compatible = "pwm-backlight";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_bl_lvds>;
		pwms = <&adma_pwm 0 5000000 0>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_12v0>;
		enable-gpios = <&lsio_gpio1 30 GPIO_ACTIVE_HIGH>;
		status = "disabled";
	};

	chosen {
		stdout-path = &lpuart1;
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpiobuttons>;
		autorepeat;

		switch-a {
			label = "switcha";
			linux,code = <BTN_0>;
			gpios = <&lsio_gpio1 13 GPIO_ACTIVE_LOW>;
		};

		switch-b {
			label = "switchb";
			linux,code = <BTN_1>;
			gpios = <&lsio_gpio1 14 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		led1 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_STATUS;
			gpios = <&expander 1 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "default-on";
		};

		led2 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_HEARTBEAT;
			gpios = <&expander 2 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

	/* TODO LVDS panels */

	reg_12v0: regulator-12v0 {
		compatible = "regulator-fixed";
		regulator-name = "V_12V";
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
		gpio = <&expander 6 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_pcie_1v5: regulator-pcie-1v5 {
		compatible = "regulator-fixed";
		regulator-name = "MBA8XX_PCIE_1V5";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_pcie_1v5>;
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;
		gpio = <&lsio_gpio0 30 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <1000>;
		enable-active-high;
	};

	reg_pcie_3v3: regulator-pcie-3v3 {
		compatible = "regulator-fixed";
		regulator-name = "MBA8XX_PCIE_3V3";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_reg_pcie_3v3>;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
		startup-delay-us = <1000>;
		enable-active-high;
		regulator-always-on;
	};

	reg_3v3_mb: regulator-usdhc2-vmmc {
		compatible = "regulator-fixed";
		regulator-name = "V_3V3_MB";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
	};

	sound {
		compatible = "fsl,imx-audio-tlv320aic32x4";
		model = "tqm-tlv320aic32";
		audio-codec = <&tlv320aic3x04>;
		ssi-controller = <&sai1>;
	};
};

&adc0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_adc0>;
	vref-supply = <&reg_1v8>;
	#io-channel-cells = <1>;
	status = "okay";
};

&adma_pwm {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_admapwm>;
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy0>;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ethphy0>;
			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
			ti,dp83867-rxctrl-strap-quirk;
			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
			reset-gpios = <&lsio_gpio3 2 GPIO_ACTIVE_LOW>;
			reset-assert-us = <500000>;
			reset-deassert-us = <50000>;
			enet-phy-lane-no-swap;
			interrupt-parent = <&lsio_gpio3>;
			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
		};

		ethphy3: ethernet-phy@3 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <3>;
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ethphy3>;
			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
			ti,dp83867-rxctrl-strap-quirk;
			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
			reset-gpios = <&lsio_gpio3 3 GPIO_ACTIVE_LOW>;
			reset-assert-us = <500000>;
			reset-deassert-us = <50000>;
			enet-phy-lane-no-swap;
			interrupt-parent = <&lsio_gpio3>;
			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
		};
	};
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec2>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy3>;
	status = "okay";
};

&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can0>;
	xceiver-supply = <&reg_3v3>;
	status = "okay";
};

&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_can1>;
	xceiver-supply = <&reg_3v3>;
	status = "okay";
};

&i2c1 {
	tlv320aic3x04: audio-codec@18 {
		compatible = "ti,tlv320aic32x4";
		reg = <0x18>;
		clocks = <&mclkout0_lpcg 0>;
		clock-names = "mclk";
		iov-supply = <&reg_1v8>;
		ldoin-supply = <&reg_3v3>;
	};

	se97b_1c: temperature-sensor@1c {
		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
		reg = <0x1c>;
	};

	at24c02_54: eeprom@54 {
		compatible = "nxp,se97b", "atmel,24c02";
		reg = <0x54>;
		pagesize = <16>;
		vcc-supply = <&reg_3v3>;
	};

	expander: gpio@70 {
		compatible = "nxp,pca9538";
		reg = <0x70>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_pca9538>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-parent = <&lsio_gpio4>;
		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;
		#interrupt-cells = <2>;
		vcc-supply = <&reg_1v8>;

		gpio-line-names = "", "LED_A",
				  "LED_B", "",
				  "DSI_EN", "USB_RESET#",
				  "V_12V_EN", "PCIE_DIS#";
	};
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_lpi2c2>;
	pinctrl-1 = <&pinctrl_lpi2c2gpio>;
	scl-gpios = <&lsio_gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&lsio_gpio2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	status = "okay";
};

/* TODO LDB */

&lpspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi1>;
	cs-gpios = <&lsio_gpio0 27 GPIO_ACTIVE_LOW>, <&lsio_gpio0 29 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpspi2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi2>;
	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpspi3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi3>;
	num-cs = <2>;
	cs-gpios = <&lsio_gpio0 16 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&lpuart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart1>;
	status = "okay";
};

&lpuart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart3>;
	status = "okay";
};

&lsio_gpio3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lsgpio3>;
	gpio-line-names = "", "", "", "",
			  "", "", "", "",
			  "", "", "", "",
			  "", "", "", "X4_15",
			  "", "", "", "",
			  "", "", "", "",
			  "", "", "", "",
			  "", "", "", "";
};

/* TODO: Mini-PCIe */

&sai1 {
	assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
			  <&sai1_lpcg 0>;
	assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai1>;
	status = "okay";
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-active-high;
	over-current-active-low;
	dr_mode = "otg";
	status = "okay";
};

&usbotg3 {
	status = "okay";
};

&usbotg3_cdns3 {
	dr_mode = "host";
	status = "okay";
};

&usbphy1 {
	status = "okay";
};

&usb3_phy {
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	bus-width = <4>;
	cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
	wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
	vmmc-supply = <&reg_3v3_mb>;
	no-1-8-v;
	no-sdio;
	no-mmc;
	status = "okay";
};

&iomuxc {
	pinctrl_adc0: adc0grp {
		fsl,pins = <IMX8QXP_ADC_IN0_ADMA_ADC_IN0	0x02000060>,
			   <IMX8QXP_ADC_IN1_ADMA_ADC_IN1	0x02000060>,
			   <IMX8QXP_ADC_IN2_ADMA_ADC_IN2	0x02000060>,
			   <IMX8QXP_ADC_IN3_ADMA_ADC_IN3	0x02000060>;
	};

	pinctrl_admapwm: admapwmgrp {
		fsl,pins = <IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT	0x00000021>;
	};

	pinctrl_bl_lvds: bllvdsgrp {
		fsl,pins = <IMX8QXP_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO30	0x00000021>;
	};

	pinctrl_can0: can0grp {
		fsl,pins = <IMX8QXP_UART0_RX_ADMA_FLEXCAN0_RX		0x00000021>,
			   <IMX8QXP_UART0_TX_ADMA_FLEXCAN0_TX		0x00000021>;
	};

	pinctrl_can1: can1grp {
		fsl,pins = <IMX8QXP_UART2_RX_ADMA_FLEXCAN1_RX		0x00000021>,
			   <IMX8QXP_UART2_TX_ADMA_FLEXCAN1_TX		0x00000021>;
	};

	pinctrl_ethphy0: ethphy0grp {
		fsl,pins = <IMX8QXP_CSI_EN_LSIO_GPIO3_IO02		0x00000040>,
			   <IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00		0x00000040>;
	};

	pinctrl_ethphy3: ethphy3grp {
		fsl,pins = <IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03		0x00000040>,
			   <IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01		0x00000040>;
	};

	pinctrl_fec1: fec1grp {
		fsl,pins = <IMX8QXP_ENET0_MDC_CONN_ENET0_MDC			0x06000041>,
			   <IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO			0x06000041>,
			   <IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000040>,
			   <IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000040>;
	};

	pinctrl_fec2: fec2grp {
		fsl,pins = <IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL		0x00000040>,
			   <IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC		0x00000040>,
			   <IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0		0x00000040>,
			   <IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1		0x00000040>,
			   <IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2		0x00000040>,
			   <IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3		0x00000040>,
			   <IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC		0x00000040>,
			   <IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL		0x00000040>,
			   <IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0		0x00000040>,
			   <IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1		0x00000040>,
			   <IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2		0x00000040>,
			   <IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3		0x00000040>;
	};

	pinctrl_gpiobuttons: gpiobuttonsgrp {
		fsl,pins = <IMX8QXP_ADC_IN5_LSIO_GPIO1_IO13	0x00000020>,
			   <IMX8QXP_ADC_IN4_LSIO_GPIO1_IO14	0x00000020>;
	};

	pinctrl_lpi2c2: lpi2c2grp {
		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_ADMA_I2C2_SCL	0x06000021>,
			   <IMX8QXP_MIPI_DSI1_GPIO0_01_ADMA_I2C2_SDA	0x06000021>;
	};

	pinctrl_lpi2c2gpio: lpi2c2gpiogrp {
		fsl,pins = <IMX8QXP_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO31	0x06000021>,
			   <IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00	0x06000021>;
	};

	pinctrl_lpuart1: lpuart1grp {
		fsl,pins = <IMX8QXP_UART1_RX_ADMA_UART1_RX	0x06000020>,
			   <IMX8QXP_UART1_TX_ADMA_UART1_TX	0x06000020>;
	};

	pinctrl_lpuart3: lpuart3grp {
		fsl,pins = <IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX	0x06000020>,
			   <IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX	0x06000020>;
	};

	pinctrl_lsgpio3: lsgpio3grp {
		fsl,pins = <IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15	0x00000021>;
	};

	pinctrl_pca9538: pca9538grp {
		fsl,pins = <IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19	0x00000020>;
	};

	pinctrl_pcieb: pcieagrp {
		fsl,pins = <IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00	0x06000041>,
			   <IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01	0x06000041>,
			   <IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02	0x04000041>;
	};

	pinctrl_reg_pcie_1v5: regpcie1v5grp {
		fsl,pins = <IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30	0x00000021>;
	};

	pinctrl_reg_pcie_3v3: regpcie3v3grp {
		fsl,pins = <IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31	0x00000021>;
	};

	pinctrl_sai1: sai1grp {
		fsl,pins = <IMX8QXP_MCLK_OUT0_ADMA_ACM_MCLK_OUT0	0x06000041>,
			   <IMX8QXP_FLEXCAN0_RX_ADMA_SAI1_TXC		0x06000041>,
			   <IMX8QXP_FLEXCAN0_TX_ADMA_SAI1_TXFS		0x06000041>,
			   <IMX8QXP_FLEXCAN1_RX_ADMA_SAI1_TXD		0x06000041>,
			   <IMX8QXP_FLEXCAN1_TX_ADMA_SAI1_RXD		0x06000041>;
	};

	pinctrl_spi1: spi1grp {
		fsl,pins = <IMX8QXP_SAI0_TXC_ADMA_SPI1_SDI	0x00000041>,
			   <IMX8QXP_SAI0_TXD_ADMA_SPI1_SDO	0x00000041>,
			   <IMX8QXP_SAI0_TXFS_ADMA_SPI1_SCK	0x00000041>,
			   <IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27	0x00000021>,
			   <IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29	0x00000021>;
	};

	pinctrl_spi2: spi2grp {
		fsl,pins = <IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK	0x00000041>,
			   <IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI	0x00000041>,
			   <IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO	0x00000041>,
			   <IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00	0x00000021>;
	};

	pinctrl_spi3: spi3grp {
		fsl,pins = <IMX8QXP_SPI3_SCK_ADMA_SPI3_SCK	0x00000041>,
			   <IMX8QXP_SPI3_SDI_ADMA_SPI3_SDI	0x00000041>,
			   <IMX8QXP_SPI3_SDO_ADMA_SPI3_SDO	0x00000041>,
			   <IMX8QXP_SPI3_CS0_LSIO_GPIO0_IO16	0x00000021>,
			   <IMX8QXP_SPI3_CS1_ADMA_SPI3_CS1	0x00000021>;
	};

	pinctrl_usbotg1: usbotg1grp {
		fsl,pins = <IMX8QXP_USB_SS3_TC0_CONN_USB_OTG1_PWR	0x00000021>,
			   <IMX8QXP_USB_SS3_TC2_CONN_USB_OTG1_OC	0x00000021>;
	};

	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
		fsl,pins = <IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21		0x00000021>,
			   <IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22		0x00000021>;
	};

	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041>,
			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021>,
			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021>,
			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021>,
			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021>,
			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021>,
			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021>;
	};

	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK		0x06000040>,
			   <IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD		0x00000020>,
			   <IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020>,
			   <IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020>,
			   <IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020>,
			   <IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020>,
			   <IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020>;
	};
};