/* * MC kernel module * (C) 2003 Linux Networx (http://lnxi.com) * This file may be distributed under the terms of the * GNU General Public License. * * Written by Thayne Harbaugh * Based on work by Dan Hollis and others. * http://www.anime.net/~goemon/linux-ecc/ * * NMI handling support added by * Dave Peterson * * $Id: edac_mc.h,v 1.4.2.10 2005/10/05 00:43:44 dsp_llnl Exp $ * */ #ifndef _EDAC_MC_H_ #define _EDAC_MC_H_ #include #include #include #include #include #include #include #include #include #include #include #include #define EDAC_MC_LABEL_LEN 31 #define MC_PROC_NAME_MAX_LEN 7 #if PAGE_SHIFT < 20 #define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) ) #else /* PAGE_SHIFT > 20 */ #define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) ) #endif #define edac_printk(level, prefix, fmt, arg...) \ printk(level "EDAC " prefix ": " fmt, ##arg) #define edac_mc_printk(mci, level, fmt, arg...) \ printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg) #define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \ printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg) /* prefixes for edac_printk() and edac_mc_printk() */ #define EDAC_MC "MC" #define EDAC_PCI "PCI" #define EDAC_DEBUG "DEBUG" #ifdef CONFIG_EDAC_DEBUG extern int edac_debug_level; #define edac_debug_printk(level, fmt, arg...) \ do { \ if (level <= edac_debug_level) \ edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \ } while(0) #define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ ) #define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ ) #define debugf2( ... ) edac_debug_printk(2, __VA_ARGS__ ) #define debugf3( ... ) edac_debug_printk(3, __VA_ARGS__ ) #define debugf4( ... ) edac_debug_printk(4, __VA_ARGS__ ) #else /* !CONFIG_EDAC_DEBUG */ #define debugf0( ... ) #define debugf1( ... ) #define debugf2( ... ) #define debugf3( ... ) #define debugf4( ... ) #endif /* !CONFIG_EDAC_DEBUG */ #define edac_xstr(s) edac_str(s) #define edac_str(s) #s #define EDAC_MOD_STR edac_xstr(KBUILD_BASENAME) #define BIT(x) (1 << (x)) #define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \ PCI_DEVICE_ID_ ## vend ## _ ## dev #if defined(CONFIG_X86) && defined(CONFIG_PCI) #define dev_name(dev) pci_name(to_pci_dev(dev)) #else #define dev_name(dev) to_platform_device(dev)->name #endif /* memory devices */ enum dev_type { DEV_UNKNOWN = 0, DEV_X1, DEV_X2, DEV_X4, DEV_X8, DEV_X16, DEV_X32, /* Do these parts exist? */ DEV_X64 /* Do these parts exist? */ }; #define DEV_FLAG_UNKNOWN BIT(DEV_UNKNOWN) #define DEV_FLAG_X1 BIT(DEV_X1) #define DEV_FLAG_X2 BIT(DEV_X2) #define DEV_FLAG_X4 BIT(DEV_X4) #define DEV_FLAG_X8 BIT(DEV_X8) #define DEV_FLAG_X16 BIT(DEV_X16) #define DEV_FLAG_X32 BIT(DEV_X32) #define DEV_FLAG_X64 BIT(DEV_X64) /* memory types */ enum mem_type { MEM_EMPTY = 0, /* Empty csrow */ MEM_RESERVED, /* Reserved csrow type */ MEM_UNKNOWN, /* Unknown csrow type */ MEM_FPM, /* Fast page mode */ MEM_EDO, /* Extended data out */ MEM_BEDO, /* Burst Extended data out */ MEM_SDR, /* Single data rate SDRAM */ MEM_RDR, /* Registered single data rate SDRAM */ MEM_DDR, /* Double data rate SDRAM */ MEM_RDDR, /* Registered Double data rate SDRAM */ MEM_RMBS /* Rambus DRAM */ }; #define MEM_FLAG_EMPTY BIT(MEM_EMPTY) #define MEM_FLAG_RESERVED BIT(MEM_RESERVED) #define MEM_FLAG_UNKNOWN BIT(MEM_UNKNOWN) #define MEM_FLAG_FPM BIT(MEM_FPM) #define MEM_FLAG_EDO BIT(MEM_EDO) #define MEM_FLAG_BEDO BIT(MEM_BEDO) #define MEM_FLAG_SDR BIT(MEM_SDR) #define MEM_FLAG_RDR BIT(MEM_RDR) #define MEM_FLAG_DDR BIT(MEM_DDR) #define MEM_FLAG_RDDR BIT(MEM_RDDR) #define MEM_FLAG_RMBS BIT(MEM_RMBS) /* chipset Error Detection and Correction capabilities and mode */ enum edac_type { EDAC_UNKNOWN = 0, /* Unknown if ECC is available */ EDAC_NONE, /* Doesnt support ECC */ EDAC_RESERVED, /* Reserved ECC type */ EDAC_PARITY, /* Detects parity errors */ EDAC_EC, /* Error Checking - no correction */ EDAC_SECDED, /* Single bit error correction, Double detection */ EDAC_S2ECD2ED, /* Chipkill x2 devices - do these exist? */ EDAC_S4ECD4ED, /* Chipkill x4 devices */ EDAC_S8ECD8ED, /* Chipkill x8 devices */ EDAC_S16ECD16ED, /* Chipkill x16 devices */ }; #define EDAC_FLAG_UNKNOWN BIT(EDAC_UNKNOWN) #define EDAC_FLAG_NONE BIT(EDAC_NONE) #define EDAC_FLAG_PARITY BIT(EDAC_PARITY) #define EDAC_FLAG_EC BIT(EDAC_EC) #define EDAC_FLAG_SECDED BIT(EDAC_SECDED) #define EDAC_FLAG_S2ECD2ED BIT(EDAC_S2ECD2ED) #define EDAC_FLAG_S4ECD4ED BIT(EDAC_S4ECD4ED) #define EDAC_FLAG_S8ECD8ED BIT(EDAC_S8ECD8ED) #define EDAC_FLAG_S16ECD16ED BIT(EDAC_S16ECD16ED) /* scrubbing capabilities */ enum scrub_type { SCRUB_UNKNOWN = 0, /* Unknown if scrubber is available */ SCRUB_NONE, /* No scrubber */ SCRUB_SW_PROG, /* SW progressive (sequential) scrubbing */ SCRUB_SW_SRC, /* Software scrub only errors */ SCRUB_SW_PROG_SRC, /* Progressive software scrub from an error */ SCRUB_SW_TUNABLE, /* Software scrub frequency is tunable */ SCRUB_HW_PROG, /* HW progressive (sequential) scrubbing */ SCRUB_HW_SRC, /* Hardware scrub only errors */ SCRUB_HW_PROG_SRC, /* Progressive hardware scrub from an error */ SCRUB_HW_TUNABLE /* Hardware scrub frequency is tunable */ }; #define SCRUB_FLAG_SW_PROG BIT(SCRUB_SW_PROG) #define SCRUB_FLAG_SW_SRC BIT(SCRUB_SW_SRC_CORR) #define SCRUB_FLAG_SW_PROG_SRC BIT(SCRUB_SW_PROG_SRC_CORR) #define SCRUB_FLAG_SW_TUN BIT(SCRUB_SW_SCRUB_TUNABLE) #define SCRUB_FLAG_HW_PROG BIT(SCRUB_HW_PROG) #define SCRUB_FLAG_HW_SRC BIT(SCRUB_HW_SRC_CORR) #define SCRUB_FLAG_HW_PROG_SRC BIT(SCRUB_HW_PROG_SRC_CORR) #define SCRUB_FLAG_HW_TUN BIT(SCRUB_HW_TUNABLE) /* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */ /* * There are several things to be aware of that aren't at all obvious: * * * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc.. * * These are some of the many terms that are thrown about that don't always * mean what people think they mean (Inconceivable!). In the interest of * creating a common ground for discussion, terms and their definitions * will be established. * * Memory devices: The individual chip on a memory stick. These devices * commonly output 4 and 8 bits each. Grouping several * of these in parallel provides 64 bits which is common * for a memory stick. * * Memory Stick: A printed circuit board that agregates multiple * memory devices in parallel. This is the atomic * memory component that is purchaseable by Joe consumer * and loaded into a memory socket. * * Socket: A physical connector on the motherboard that accepts * a single memory stick. * * Channel: Set of memory devices on a memory stick that must be * grouped in parallel with one or more additional * channels from other memory sticks. This parallel * grouping of the output from multiple channels are * necessary for the smallest granularity of memory access. * Some memory controllers are capable of single channel - * which means that memory sticks can be loaded * individually. Other memory controllers are only * capable of dual channel - which means that memory * sticks must be loaded as pairs (see "socket set"). * * Chip-select row: All of the memory devices that are selected together. * for a single, minimum grain of memory access. * This selects all of the parallel memory devices across * all of the parallel channels. Common chip-select rows * for single channel are 64 bits, for dual channel 128 * bits. * * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory. * Motherboards commonly drive two chip-select pins to * a memory stick. A single-ranked stick, will occupy * only one of those rows. The other will be unused. * * Double-Ranked stick: A double-ranked stick has two chip-select rows which * access different sets of memory devices. The two * rows cannot be accessed concurrently. * * Double-sided stick: DEPRECATED TERM, see Double-Ranked stick. * A double-sided stick has two chip-select rows which * access different sets of memory devices. The two * rows cannot be accessed concurrently. "Double-sided" * is irrespective of the memory devices being mounted * on both sides of the memory stick. * * Socket set: All of the memory sticks that are required for for * a single memory access or all of the memory sticks * spanned by a chip-select row. A single socket set * has two chip-select rows and if double-sided sticks * are used these will occupy those chip-select rows. * * Bank: This term is avoided because it is unclear when * needing to distinguish between chip-select rows and * socket sets. * * Controller pages: * * Physical pages: * * Virtual pages: * * * STRUCTURE ORGANIZATION AND CHOICES * * * * PS - I enjoyed writing all that about as much as you enjoyed reading it. */ struct channel_info { int chan_idx; /* channel index */ u32 ce_count; /* Correctable Errors for this CHANNEL */ char label[EDAC_MC_LABEL_LEN + 1]; /* DIMM label on motherboard */ struct csrow_info *csrow; /* the parent */ }; struct csrow_info { unsigned long first_page; /* first page number in dimm */ unsigned long last_page; /* last page number in dimm */ unsigned long page_mask; /* used for interleaving - * 0UL for non intlv */ u32 nr_pages; /* number of pages in csrow */ u32 grain; /* granularity of reported error in bytes */ int csrow_idx; /* the chip-select row */ enum dev_type dtype; /* memory device type */ u32 ue_count; /* Uncorrectable Errors for this csrow */ u32 ce_count; /* Correctable Errors for this csrow */ enum mem_type mtype; /* memory csrow type */ enum edac_type edac_mode; /* EDAC mode for this csrow */ struct mem_ctl_info *mci; /* the parent */ struct kobject kobj; /* sysfs kobject for this csrow */ struct completion kobj_complete; /* FIXME the number of CHANNELs might need to become dynamic */ u32 nr_channels; struct channel_info *channels; }; struct mem_ctl_info { struct list_head link; /* for global list of mem_ctl_info structs */ unsigned long mtype_cap; /* memory types supported by mc */ unsigned long edac_ctl_cap; /* Mem controller EDAC capabilities */ unsigned long edac_cap; /* configuration capabilities - this is * closely related to edac_ctl_cap. The * difference is that the controller may be * capable of s4ecd4ed which would be listed * in edac_ctl_cap, but if channels aren't * capable of s4ecd4ed then the edac_cap would * not have that capability. */ unsigned long scrub_cap; /* chipset scrub capabilities */ enum scrub_type scrub_mode; /* current scrub mode */ /* pointer to edac checking routine */ void (*edac_check) (struct mem_ctl_info * mci); /* * Remaps memory pages: controller pages to physical pages. * For most MC's, this will be NULL. */ /* FIXME - why not send the phys page to begin with? */ unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci, unsigned long page); int mc_idx; int nr_csrows; struct csrow_info *csrows; /* * FIXME - what about controllers on other busses? - IDs must be * unique. dev pointer should be sufficiently unique, but * BUS:SLOT.FUNC numbers may not be unique. */ struct device *dev; const char *mod_name; const char *mod_ver; const char *ctl_name; char proc_name[MC_PROC_NAME_MAX_LEN + 1]; void *pvt_info; u32 ue_noinfo_count; /* Uncorrectable Errors w/o info */ u32 ce_noinfo_count; /* Correctable Errors w/o info */ u32 ue_count; /* Total Uncorrectable Errors for this MC */ u32 ce_count; /* Total Correctable Errors for this MC */ unsigned long start_time; /* mci load start time (in jiffies) */ /* this stuff is for safe removal of mc devices from global list while * NMI handlers may be traversing list */ struct rcu_head rcu; struct completion complete; /* edac sysfs device control */ struct kobject edac_mci_kobj; struct completion kobj_complete; }; #ifdef CONFIG_PCI /* write all or some bits in a byte-register*/ static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value, u8 mask) { if (mask != 0xff) { u8 buf; pci_read_config_byte(pdev, offset, &buf); value &= mask; buf &= ~mask; value |= buf; } pci_write_config_byte(pdev, offset, value); } /* write all or some bits in a word-register*/ static inline void pci_write_bits16(struct pci_dev *pdev, int offset, u16 value, u16 mask) { if (mask != 0xffff) { u16 buf; pci_read_config_word(pdev, offset, &buf); value &= mask; buf &= ~mask; value |= buf; } pci_write_config_word(pdev, offset, value); } /* write all or some bits in a dword-register*/ static inline void pci_write_bits32(struct pci_dev *pdev, int offset, u32 value, u32 mask) { if (mask != 0xffff) { u32 buf; pci_read_config_dword(pdev, offset, &buf); value &= mask; buf &= ~mask; value |= buf; } pci_write_config_dword(pdev, offset, value); } #endif /* CONFIG_PCI */ #ifdef CONFIG_EDAC_DEBUG void edac_mc_dump_channel(struct channel_info *chan); void edac_mc_dump_mci(struct mem_ctl_info *mci); void edac_mc_dump_csrow(struct csrow_info *csrow); #endif /* CONFIG_EDAC_DEBUG */ extern int edac_mc_add_mc(struct mem_ctl_info *mci,int mc_idx); extern struct mem_ctl_info * edac_mc_del_mc(struct device *dev); extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page); extern void edac_mc_scrub_block(unsigned long page, unsigned long offset, u32 size); /* * The no info errors are used when error overflows are reported. * There are a limited number of error logging registers that can * be exausted. When all registers are exhausted and an additional * error occurs then an error overflow register records that an * error occured and the type of error, but doesn't have any * further information. The ce/ue versions make for cleaner * reporting logic and function interface - reduces conditional * statement clutter and extra function arguments. */ extern void edac_mc_handle_ce(struct mem_ctl_info *mci, unsigned long page_frame_number, unsigned long offset_in_page, unsigned long syndrome, int row, int channel, const char *msg); extern void edac_mc_handle_ce_no_info(struct mem_ctl_info *mci, const char *msg); extern void edac_mc_handle_ue(struct mem_ctl_info *mci, unsigned long page_frame_number, unsigned long offset_in_page, int row, const char *msg); extern void edac_mc_handle_ue_no_info(struct mem_ctl_info *mci, const char *msg); /* * This kmalloc's and initializes all the structures. * Can't be used if all structures don't have the same lifetime. */ extern struct mem_ctl_info *edac_mc_alloc(unsigned sz_pvt, unsigned nr_csrows, unsigned nr_chans); /* Free an mc previously allocated by edac_mc_alloc() */ extern void edac_mc_free(struct mem_ctl_info *mci); #endif /* _EDAC_MC_H_ */