/* SPDX-License-Identifier: GPL-2.0 * * Copyright 2020 HabanaLabs, Ltd. * All Rights Reserved. * */ #ifndef CPUCP_IF_H #define CPUCP_IF_H #include #include #define NUM_HBM_PSEUDO_CH 2 #define NUM_HBM_CH_PER_DEV 8 #define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_SHIFT 0 #define CPUCP_PKT_HBM_ECC_INFO_WR_PAR_MASK 0x00000001 #define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_SHIFT 1 #define CPUCP_PKT_HBM_ECC_INFO_RD_PAR_MASK 0x00000002 #define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_SHIFT 2 #define CPUCP_PKT_HBM_ECC_INFO_CA_PAR_MASK 0x00000004 #define CPUCP_PKT_HBM_ECC_INFO_DERR_SHIFT 3 #define CPUCP_PKT_HBM_ECC_INFO_DERR_MASK 0x00000008 #define CPUCP_PKT_HBM_ECC_INFO_SERR_SHIFT 4 #define CPUCP_PKT_HBM_ECC_INFO_SERR_MASK 0x00000010 #define CPUCP_PKT_HBM_ECC_INFO_TYPE_SHIFT 5 #define CPUCP_PKT_HBM_ECC_INFO_TYPE_MASK 0x00000020 #define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_SHIFT 6 #define CPUCP_PKT_HBM_ECC_INFO_HBM_CH_MASK 0x000007C0 struct hl_eq_hbm_ecc_data { /* SERR counter */ __le32 sec_cnt; /* DERR counter */ __le32 dec_cnt; /* Supplemental Information according to the mask bits */ __le32 hbm_ecc_info; /* Address in hbm where the ecc happened */ __le32 first_addr; /* SERR continuous address counter */ __le32 sec_cont_cnt; __le32 pad; }; /* * EVENT QUEUE */ struct hl_eq_header { __le32 reserved; __le32 ctl; }; struct hl_eq_ecc_data { __le64 ecc_address; __le64 ecc_syndrom; __u8 memory_wrapper_idx; __u8 pad[7]; }; struct hl_eq_entry { struct hl_eq_header hdr; union { struct hl_eq_ecc_data ecc_data; struct hl_eq_hbm_ecc_data hbm_ecc_data; __le64 data[7]; }; }; #define HL_EQ_ENTRY_SIZE sizeof(struct hl_eq_entry) #define EQ_CTL_READY_SHIFT 31 #define EQ_CTL_READY_MASK 0x80000000 #define EQ_CTL_EVENT_TYPE_SHIFT 16 #define EQ_CTL_EVENT_TYPE_MASK 0x03FF0000 enum pq_init_status { PQ_INIT_STATUS_NA = 0, PQ_INIT_STATUS_READY_FOR_CP, PQ_INIT_STATUS_READY_FOR_HOST, PQ_INIT_STATUS_READY_FOR_CP_SINGLE_MSI }; /* * CpuCP Primary Queue Packets * * During normal operation, the host's kernel driver needs to send various * messages to CpuCP, usually either to SET some value into a H/W periphery or * to GET the current value of some H/W periphery. For example, SET the * frequency of MME/TPC and GET the value of the thermal sensor. * * These messages can be initiated either by the User application or by the * host's driver itself, e.g. power management code. In either case, the * communication from the host's driver to CpuCP will *always* be in * synchronous mode, meaning that the host will send a single message and poll * until the message was acknowledged and the results are ready (if results are * needed). * * This means that only a single message can be sent at a time and the host's * driver must wait for its result before sending the next message. Having said * that, because these are control messages which are sent in a relatively low * frequency, this limitation seems acceptable. It's important to note that * in case of multiple devices, messages to different devices *can* be sent * at the same time. * * The message, inputs/outputs (if relevant) and fence object will be located * on the device DDR at an address that will be determined by the host's driver. * During device initialization phase, the host will pass to CpuCP that address. * Most of the message types will contain inputs/outputs inside the message * itself. The common part of each message will contain the opcode of the * message (its type) and a field representing a fence object. * * When the host's driver wishes to send a message to CPU CP, it will write the * message contents to the device DDR, clear the fence object and then write to * the PSOC_ARC1_AUX_SW_INTR, to issue interrupt 121 to ARC Management CPU. * * Upon receiving the interrupt (#121), CpuCP will read the message from the * DDR. In case the message is a SET operation, CpuCP will first perform the * operation and then write to the fence object on the device DDR. In case the * message is a GET operation, CpuCP will first fill the results section on the * device DDR and then write to the fence object. If an error occurred, CpuCP * will fill the rc field with the right error code. * * In the meantime, the host's driver will poll on the fence object. Once the * host sees that the fence object is signaled, it will read the results from * the device DDR (if relevant) and resume the code execution in the host's * driver. * * To use QMAN packets, the opcode must be the QMAN opcode, shifted by 8 * so the value being put by the host's driver matches the value read by CpuCP * * Non-QMAN packets should be limited to values 1 through (2^8 - 1) * * Detailed description: * * CPUCP_PACKET_DISABLE_PCI_ACCESS - * After receiving this packet the embedded CPU must NOT issue PCI * transactions (read/write) towards the Host CPU. This also include * sending MSI-X interrupts. * This packet is usually sent before the device is moved to D3Hot state. * * CPUCP_PACKET_ENABLE_PCI_ACCESS - * After receiving this packet the embedded CPU is allowed to issue PCI * transactions towards the Host CPU, including sending MSI-X interrupts. * This packet is usually send after the device is moved to D0 state. * * CPUCP_PACKET_TEMPERATURE_GET - * Fetch the current temperature / Max / Max Hyst / Critical / * Critical Hyst of a specified thermal sensor. The packet's * arguments specify the desired sensor and the field to get. * * CPUCP_PACKET_VOLTAGE_GET - * Fetch the voltage / Max / Min of a specified sensor. The packet's * arguments specify the sensor and type. * * CPUCP_PACKET_CURRENT_GET - * Fetch the current / Max / Min of a specified sensor. The packet's * arguments specify the sensor and type. * * CPUCP_PACKET_FAN_SPEED_GET - * Fetch the speed / Max / Min of a specified fan. The packet's * arguments specify the sensor and type. * * CPUCP_PACKET_PWM_GET - * Fetch the pwm value / mode of a specified pwm. The packet's * arguments specify the sensor and type. * * CPUCP_PACKET_PWM_SET - * Set the pwm value / mode of a specified pwm. The packet's * arguments specify the sensor, type and value. * * CPUCP_PACKET_FREQUENCY_SET - * Set the frequency of a specified PLL. The packet's arguments specify * the PLL and the desired frequency. The actual frequency in the device * might differ from the requested frequency. * * CPUCP_PACKET_FREQUENCY_GET - * Fetch the frequency of a specified PLL. The packet's arguments specify * the PLL. * * CPUCP_PACKET_LED_SET - * Set the state of a specified led. The packet's arguments * specify the led and the desired state. * * CPUCP_PACKET_I2C_WR - * Write 32-bit value to I2C device. The packet's arguments specify the * I2C bus, address and value. * * CPUCP_PACKET_I2C_RD - * Read 32-bit value from I2C device. The packet's arguments specify the * I2C bus and address. * * CPUCP_PACKET_INFO_GET - * Fetch information from the device as specified in the packet's * structure. The host's driver passes the max size it allows the CpuCP to * write to the structure, to prevent data corruption in case of * mismatched driver/FW versions. * * CPUCP_PACKET_FLASH_PROGRAM_REMOVED - this packet was removed * * CPUCP_PACKET_UNMASK_RAZWI_IRQ - * Unmask the given IRQ. The IRQ number is specified in the value field. * The packet is sent after receiving an interrupt and printing its * relevant information. * * CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY - * Unmask the given IRQs. The IRQs numbers are specified in an array right * after the cpucp_packet structure, where its first element is the array * length. The packet is sent after a soft reset was done in order to * handle any interrupts that were sent during the reset process. * * CPUCP_PACKET_TEST - * Test packet for CpuCP connectivity. The CPU will put the fence value * in the result field. * * CPUCP_PACKET_FREQUENCY_CURR_GET - * Fetch the current frequency of a specified PLL. The packet's arguments * specify the PLL. * * CPUCP_PACKET_MAX_POWER_GET - * Fetch the maximal power of the device. * * CPUCP_PACKET_MAX_POWER_SET - * Set the maximal power of the device. The packet's arguments specify * the power. * * CPUCP_PACKET_EEPROM_DATA_GET - * Get EEPROM data from the CpuCP kernel. The buffer is specified in the * addr field. The CPU will put the returned data size in the result * field. In addition, the host's driver passes the max size it allows the * CpuCP to write to the structure, to prevent data corruption in case of * mismatched driver/FW versions. * * CPUCP_PACKET_NIC_INFO_GET - * Fetch information from the device regarding the NIC. the host's driver * passes the max size it allows the CpuCP to write to the structure, to * prevent data corruption in case of mismatched driver/FW versions. * * CPUCP_PACKET_TEMPERATURE_SET - * Set the value of the offset property of a specified thermal sensor. * The packet's arguments specify the desired sensor and the field to * set. * * CPUCP_PACKET_VOLTAGE_SET - * Trigger the reset_history property of a specified voltage sensor. * The packet's arguments specify the desired sensor and the field to * set. * * CPUCP_PACKET_CURRENT_SET - * Trigger the reset_history property of a specified current sensor. * The packet's arguments specify the desired sensor and the field to * set. * * CPUCP_PACKET_PCIE_THROUGHPUT_GET * Get throughput of PCIe. * The packet's arguments specify the transaction direction (TX/RX). * The window measurement is 10[msec], and the return value is in KB/sec. * * CPUCP_PACKET_PCIE_REPLAY_CNT_GET * Replay count measures number of "replay" events, which is basicly * number of retries done by PCIe. * * CPUCP_PACKET_TOTAL_ENERGY_GET * Total Energy is measurement of energy from the time FW Linux * is loaded. It is calculated by multiplying the average power * by time (passed from armcp start). The units are in MilliJouls. * * CPUCP_PACKET_PLL_INFO_GET * Fetch frequencies of PLL from the required PLL IP. * The packet's arguments specify the device PLL type * Pll type is the PLL from device pll_index enum. * The result is composed of 4 outputs, each is 16-bit * frequency in MHz. * */ enum cpucp_packet_id { CPUCP_PACKET_DISABLE_PCI_ACCESS = 1, /* internal */ CPUCP_PACKET_ENABLE_PCI_ACCESS, /* internal */ CPUCP_PACKET_TEMPERATURE_GET, /* sysfs */ CPUCP_PACKET_VOLTAGE_GET, /* sysfs */ CPUCP_PACKET_CURRENT_GET, /* sysfs */ CPUCP_PACKET_FAN_SPEED_GET, /* sysfs */ CPUCP_PACKET_PWM_GET, /* sysfs */ CPUCP_PACKET_PWM_SET, /* sysfs */ CPUCP_PACKET_FREQUENCY_SET, /* sysfs */ CPUCP_PACKET_FREQUENCY_GET, /* sysfs */ CPUCP_PACKET_LED_SET, /* debugfs */ CPUCP_PACKET_I2C_WR, /* debugfs */ CPUCP_PACKET_I2C_RD, /* debugfs */ CPUCP_PACKET_INFO_GET, /* IOCTL */ CPUCP_PACKET_FLASH_PROGRAM_REMOVED, CPUCP_PACKET_UNMASK_RAZWI_IRQ, /* internal */ CPUCP_PACKET_UNMASK_RAZWI_IRQ_ARRAY, /* internal */ CPUCP_PACKET_TEST, /* internal */ CPUCP_PACKET_FREQUENCY_CURR_GET, /* sysfs */ CPUCP_PACKET_MAX_POWER_GET, /* sysfs */ CPUCP_PACKET_MAX_POWER_SET, /* sysfs */ CPUCP_PACKET_EEPROM_DATA_GET, /* sysfs */ CPUCP_PACKET_NIC_INFO_GET, /* internal */ CPUCP_PACKET_TEMPERATURE_SET, /* sysfs */ CPUCP_PACKET_VOLTAGE_SET, /* sysfs */ CPUCP_PACKET_CURRENT_SET, /* sysfs */ CPUCP_PACKET_PCIE_THROUGHPUT_GET, /* internal */ CPUCP_PACKET_PCIE_REPLAY_CNT_GET, /* internal */ CPUCP_PACKET_TOTAL_ENERGY_GET, /* internal */ CPUCP_PACKET_PLL_INFO_GET, /* internal */ }; #define CPUCP_PACKET_FENCE_VAL 0xFE8CE7A5 #define CPUCP_PKT_CTL_RC_SHIFT 12 #define CPUCP_PKT_CTL_RC_MASK 0x0000F000 #define CPUCP_PKT_CTL_OPCODE_SHIFT 16 #define CPUCP_PKT_CTL_OPCODE_MASK 0x1FFF0000 #define CPUCP_PKT_RES_PLL_OUT0_SHIFT 0 #define CPUCP_PKT_RES_PLL_OUT0_MASK 0x000000000000FFFFull #define CPUCP_PKT_RES_PLL_OUT1_SHIFT 16 #define CPUCP_PKT_RES_PLL_OUT1_MASK 0x00000000FFFF0000ull #define CPUCP_PKT_RES_PLL_OUT2_SHIFT 32 #define CPUCP_PKT_RES_PLL_OUT2_MASK 0x0000FFFF00000000ull #define CPUCP_PKT_RES_PLL_OUT3_SHIFT 48 #define CPUCP_PKT_RES_PLL_OUT3_MASK 0xFFFF000000000000ull struct cpucp_packet { union { __le64 value; /* For SET packets */ __le64 result; /* For GET packets */ __le64 addr; /* For PQ */ }; __le32 ctl; __le32 fence; /* Signal to host that message is completed */ union { struct {/* For temperature/current/voltage/fan/pwm get/set */ __le16 sensor_index; __le16 type; }; struct { /* For I2C read/write */ __u8 i2c_bus; __u8 i2c_addr; __u8 i2c_reg; __u8 pad; /* unused */ }; struct {/* For PLL info fetch */ __le16 pll_type; /* TODO pll_reg is kept temporary before removal */ __le16 pll_reg; }; /* For any general request */ __le32 index; /* For frequency get/set */ __le32 pll_index; /* For led set */ __le32 led_index; /* For get CpuCP info/EEPROM data/NIC info */ __le32 data_max_size; }; __le32 reserved; }; struct cpucp_unmask_irq_arr_packet { struct cpucp_packet cpucp_pkt; __le32 length; __le32 irqs[0]; }; enum cpucp_packet_rc { cpucp_packet_success, cpucp_packet_invalid, cpucp_packet_fault }; /* * cpucp_temp_type should adhere to hwmon_temp_attributes * defined in Linux kernel hwmon.h file */ enum cpucp_temp_type { cpucp_temp_input, cpucp_temp_max = 6, cpucp_temp_max_hyst, cpucp_temp_crit, cpucp_temp_crit_hyst, cpucp_temp_offset = 19, cpucp_temp_highest = 22, cpucp_temp_reset_history = 23 }; enum cpucp_in_attributes { cpucp_in_input, cpucp_in_min, cpucp_in_max, cpucp_in_highest = 7, cpucp_in_reset_history }; enum cpucp_curr_attributes { cpucp_curr_input, cpucp_curr_min, cpucp_curr_max, cpucp_curr_highest = 7, cpucp_curr_reset_history }; enum cpucp_fan_attributes { cpucp_fan_input, cpucp_fan_min = 2, cpucp_fan_max }; enum cpucp_pwm_attributes { cpucp_pwm_input, cpucp_pwm_enable }; enum cpucp_pcie_throughput_attributes { cpucp_pcie_throughput_tx, cpucp_pcie_throughput_rx }; /* TODO temporary kept before removal */ enum cpucp_pll_reg_attributes { cpucp_pll_nr_reg, cpucp_pll_nf_reg, cpucp_pll_od_reg, cpucp_pll_div_factor_reg, cpucp_pll_div_sel_reg }; /* TODO temporary kept before removal */ enum cpucp_pll_type_attributes { cpucp_pll_cpu, cpucp_pll_pci, }; /* Event Queue Packets */ struct eq_generic_event { __le64 data[7]; }; /* * CpuCP info */ #define CARD_NAME_MAX_LEN 16 #define VERSION_MAX_LEN 128 #define CPUCP_MAX_SENSORS 128 #define CPUCP_MAX_NICS 128 #define CPUCP_LANES_PER_NIC 4 #define CPUCP_NIC_QSFP_EEPROM_MAX_LEN 1024 #define CPUCP_MAX_NIC_LANES (CPUCP_MAX_NICS * CPUCP_LANES_PER_NIC) #define CPUCP_NIC_MASK_ARR_LEN ((CPUCP_MAX_NICS + 63) / 64) #define CPUCP_NIC_POLARITY_ARR_LEN ((CPUCP_MAX_NIC_LANES + 63) / 64) struct cpucp_sensor { __le32 type; __le32 flags; }; /** * struct cpucp_card_types - ASIC card type. * @cpucp_card_type_pci: PCI card. * @cpucp_card_type_pmc: PCI Mezzanine Card. */ enum cpucp_card_types { cpucp_card_type_pci, cpucp_card_type_pmc }; #define CPUCP_SEC_CONF_ENABLED_SHIFT 0 #define CPUCP_SEC_CONF_ENABLED_MASK 0x00000001 #define CPUCP_SEC_CONF_FLASH_WP_SHIFT 1 #define CPUCP_SEC_CONF_FLASH_WP_MASK 0x00000002 #define CPUCP_SEC_CONF_EEPROM_WP_SHIFT 2 #define CPUCP_SEC_CONF_EEPROM_WP_MASK 0x00000004 /** * struct cpucp_security_info - Security information. * @config: configuration bit field * @keys_num: number of stored keys * @revoked_keys: revoked keys bit field * @min_svn: minimal security version */ struct cpucp_security_info { __u8 config; __u8 keys_num; __u8 revoked_keys; __u8 min_svn; }; /** * struct cpucp_info - Info from CpuCP that is necessary to the host's driver * @sensors: available sensors description. * @kernel_version: CpuCP linux kernel version. * @reserved: reserved field. * @card_type: card configuration type. * @card_location: in a server, each card has different connections topology * depending on its location (relevant for PMC card type) * @cpld_version: CPLD programmed F/W version. * @infineon_version: Infineon main DC-DC version. * @fuse_version: silicon production FUSE information. * @thermal_version: thermald S/W version. * @cpucp_version: CpuCP S/W version. * @dram_size: available DRAM size. * @card_name: card name that will be displayed in HWMON subsystem on the host * @sec_info: security information */ struct cpucp_info { struct cpucp_sensor sensors[CPUCP_MAX_SENSORS]; __u8 kernel_version[VERSION_MAX_LEN]; __le32 reserved; __le32 card_type; __le32 card_location; __le32 cpld_version; __le32 infineon_version; __u8 fuse_version[VERSION_MAX_LEN]; __u8 thermal_version[VERSION_MAX_LEN]; __u8 cpucp_version[VERSION_MAX_LEN]; __le32 reserved2; __le64 dram_size; char card_name[CARD_NAME_MAX_LEN]; __le64 reserved3; __le64 reserved4; __u8 reserved5; __u8 pad[7]; struct cpucp_security_info sec_info; __le32 reserved6; }; struct cpucp_mac_addr { __u8 mac_addr[ETH_ALEN]; }; struct cpucp_nic_info { struct cpucp_mac_addr mac_addrs[CPUCP_MAX_NICS]; __le64 link_mask[CPUCP_NIC_MASK_ARR_LEN]; __le64 pol_tx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; __le64 pol_rx_mask[CPUCP_NIC_POLARITY_ARR_LEN]; __le64 link_ext_mask[CPUCP_NIC_MASK_ARR_LEN]; __u8 qsfp_eeprom[CPUCP_NIC_QSFP_EEPROM_MAX_LEN]; __le64 auto_neg_mask[CPUCP_NIC_MASK_ARR_LEN]; }; #endif /* CPUCP_IF_H */