1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* at25.c -- support most SPI EEPROMs, such as Atmel AT25 models
* and Cypress FRAMs FM25 models
*
* Copyright (C) 2006 David Brownell
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/sched.h>
#include <linux/nvmem-provider.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/property.h>
#include <linux/math.h>
/*
* NOTE: this is an *EEPROM* driver. The vagaries of product naming
* mean that some AT25 products are EEPROMs, and others are FLASH.
* Handle FLASH chips with the drivers/mtd/devices/m25p80.c driver,
* not this one!
*
* EEPROMs that can be used with this driver include, for example:
* AT25M02, AT25128B
*/
#define FM25_SN_LEN 8 /* serial number length */
struct at25_data {
struct spi_device *spi;
struct mutex lock;
struct spi_eeprom chip;
unsigned addrlen;
struct nvmem_config nvmem_config;
struct nvmem_device *nvmem;
u8 sernum[FM25_SN_LEN];
};
#define AT25_WREN 0x06 /* latch the write enable */
#define AT25_WRDI 0x04 /* reset the write enable */
#define AT25_RDSR 0x05 /* read status register */
#define AT25_WRSR 0x01 /* write status register */
#define AT25_READ 0x03 /* read byte(s) */
#define AT25_WRITE 0x02 /* write byte(s)/sector */
#define FM25_SLEEP 0xb9 /* enter sleep mode */
#define FM25_RDID 0x9f /* read device ID */
#define FM25_RDSN 0xc3 /* read S/N */
#define AT25_SR_nRDY 0x01 /* nRDY = write-in-progress */
#define AT25_SR_WEN 0x02 /* write enable (latched) */
#define AT25_SR_BP0 0x04 /* BP for software writeprotect */
#define AT25_SR_BP1 0x08
#define AT25_SR_WPEN 0x80 /* writeprotect enable */
#define AT25_INSTR_BIT3 0x08 /* Additional address bit in instr */
#define FM25_ID_LEN 9 /* ID length */
#define EE_MAXADDRLEN 3 /* 24 bit addresses, up to 2 MBytes */
/* Specs often allow 5 msec for a page write, sometimes 20 msec;
* it's important to recover from write timeouts.
*/
#define EE_TIMEOUT 25
/*-------------------------------------------------------------------------*/
#define io_limit PAGE_SIZE /* bytes */
static int at25_ee_read(void *priv, unsigned int offset,
void *val, size_t count)
{
struct at25_data *at25 = priv;
char *buf = val;
u8 command[EE_MAXADDRLEN + 1];
u8 *cp;
ssize_t status;
struct spi_transfer t[2];
struct spi_message m;
u8 instr;
if (unlikely(offset >= at25->chip.byte_len))
return -EINVAL;
if ((offset + count) > at25->chip.byte_len)
count = at25->chip.byte_len - offset;
if (unlikely(!count))
return -EINVAL;
cp = command;
instr = AT25_READ;
if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
if (offset >= (1U << (at25->addrlen * 8)))
instr |= AT25_INSTR_BIT3;
*cp++ = instr;
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
default: /* case 3 */
*cp++ = offset >> 16;
fallthrough;
case 2:
*cp++ = offset >> 8;
fallthrough;
case 1:
case 0: /* can't happen: for better codegen */
*cp++ = offset >> 0;
}
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = command;
t[0].len = at25->addrlen + 1;
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
t[1].len = count;
spi_message_add_tail(&t[1], &m);
mutex_lock(&at25->lock);
/* Read it all at once.
*
* REVISIT that's potentially a problem with large chips, if
* other devices on the bus need to be accessed regularly or
* this chip is clocked very slowly
*/
status = spi_sync(at25->spi, &m);
dev_dbg(&at25->spi->dev, "read %zu bytes at %d --> %zd\n",
count, offset, status);
mutex_unlock(&at25->lock);
return status;
}
/*
* read extra registers as ID or serial number
*/
static int fm25_aux_read(struct at25_data *at25, u8 *buf, uint8_t command,
int len)
{
int status;
struct spi_transfer t[2];
struct spi_message m;
spi_message_init(&m);
memset(t, 0, sizeof(t));
t[0].tx_buf = &command;
t[0].len = 1;
spi_message_add_tail(&t[0], &m);
t[1].rx_buf = buf;
t[1].len = len;
spi_message_add_tail(&t[1], &m);
mutex_lock(&at25->lock);
status = spi_sync(at25->spi, &m);
dev_dbg(&at25->spi->dev, "read %d aux bytes --> %d\n", len, status);
mutex_unlock(&at25->lock);
return status;
}
static ssize_t sernum_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct at25_data *at25;
at25 = dev_get_drvdata(dev);
return sysfs_emit(buf, "%*ph\n", (int)sizeof(at25->sernum), at25->sernum);
}
static DEVICE_ATTR_RO(sernum);
static struct attribute *sernum_attrs[] = {
&dev_attr_sernum.attr,
NULL,
};
ATTRIBUTE_GROUPS(sernum);
static int at25_ee_write(void *priv, unsigned int off, void *val, size_t count)
{
struct at25_data *at25 = priv;
const char *buf = val;
int status = 0;
unsigned buf_size;
u8 *bounce;
if (unlikely(off >= at25->chip.byte_len))
return -EFBIG;
if ((off + count) > at25->chip.byte_len)
count = at25->chip.byte_len - off;
if (unlikely(!count))
return -EINVAL;
/* Temp buffer starts with command and address */
buf_size = at25->chip.page_size;
if (buf_size > io_limit)
buf_size = io_limit;
bounce = kmalloc(buf_size + at25->addrlen + 1, GFP_KERNEL);
if (!bounce)
return -ENOMEM;
/* For write, rollover is within the page ... so we write at
* most one page, then manually roll over to the next page.
*/
mutex_lock(&at25->lock);
do {
unsigned long timeout, retries;
unsigned segment;
unsigned offset = (unsigned) off;
u8 *cp = bounce;
int sr;
u8 instr;
*cp = AT25_WREN;
status = spi_write(at25->spi, cp, 1);
if (status < 0) {
dev_dbg(&at25->spi->dev, "WREN --> %d\n", status);
break;
}
instr = AT25_WRITE;
if (at25->chip.flags & EE_INSTR_BIT3_IS_ADDR)
if (offset >= (1U << (at25->addrlen * 8)))
instr |= AT25_INSTR_BIT3;
*cp++ = instr;
/* 8/16/24-bit address is written MSB first */
switch (at25->addrlen) {
default: /* case 3 */
*cp++ = offset >> 16;
fallthrough;
case 2:
*cp++ = offset >> 8;
fallthrough;
case 1:
case 0: /* can't happen: for better codegen */
*cp++ = offset >> 0;
}
/* Write as much of a page as we can */
segment = buf_size - (offset % buf_size);
if (segment > count)
segment = count;
memcpy(cp, buf, segment);
status = spi_write(at25->spi, bounce,
segment + at25->addrlen + 1);
dev_dbg(&at25->spi->dev, "write %u bytes at %u --> %d\n",
segment, offset, status);
if (status < 0)
break;
/* REVISIT this should detect (or prevent) failed writes
* to readonly sections of the EEPROM...
*/
/* Wait for non-busy status */
timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
retries = 0;
do {
sr = spi_w8r8(at25->spi, AT25_RDSR);
if (sr < 0 || (sr & AT25_SR_nRDY)) {
dev_dbg(&at25->spi->dev,
"rdsr --> %d (%02x)\n", sr, sr);
/* at HZ=100, this is sloooow */
msleep(1);
continue;
}
if (!(sr & AT25_SR_nRDY))
break;
} while (retries++ < 3 || time_before_eq(jiffies, timeout));
if ((sr < 0) || (sr & AT25_SR_nRDY)) {
dev_err(&at25->spi->dev,
"write %u bytes offset %u, timeout after %u msecs\n",
segment, offset,
jiffies_to_msecs(jiffies -
(timeout - EE_TIMEOUT)));
status = -ETIMEDOUT;
break;
}
off += segment;
buf += segment;
count -= segment;
} while (count > 0);
mutex_unlock(&at25->lock);
kfree(bounce);
return status;
}
/*-------------------------------------------------------------------------*/
static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip)
{
u32 val;
int err;
strncpy(chip->name, "at25", sizeof(chip->name));
err = device_property_read_u32(dev, "size", &val);
if (err)
err = device_property_read_u32(dev, "at25,byte-len", &val);
if (err) {
dev_err(dev, "Error: missing \"size\" property\n");
return err;
}
chip->byte_len = val;
err = device_property_read_u32(dev, "pagesize", &val);
if (err)
err = device_property_read_u32(dev, "at25,page-size", &val);
if (err) {
dev_err(dev, "Error: missing \"pagesize\" property\n");
return err;
}
chip->page_size = val;
err = device_property_read_u32(dev, "address-width", &val);
if (err) {
err = device_property_read_u32(dev, "at25,addr-mode", &val);
if (err) {
dev_err(dev, "Error: missing \"address-width\" property\n");
return err;
}
chip->flags = (u16)val;
} else {
switch (val) {
case 9:
chip->flags |= EE_INSTR_BIT3_IS_ADDR;
fallthrough;
case 8:
chip->flags |= EE_ADDR1;
break;
case 16:
chip->flags |= EE_ADDR2;
break;
case 24:
chip->flags |= EE_ADDR3;
break;
default:
dev_err(dev,
"Error: bad \"address-width\" property: %u\n",
val);
return -ENODEV;
}
if (device_property_present(dev, "read-only"))
chip->flags |= EE_READONLY;
}
return 0;
}
static const struct of_device_id at25_of_match[] = {
{ .compatible = "atmel,at25",},
{ .compatible = "cypress,fm25",},
{ }
};
MODULE_DEVICE_TABLE(of, at25_of_match);
static const struct spi_device_id at25_spi_ids[] = {
{ .name = "at25",},
{ .name = "fm25",},
{ }
};
MODULE_DEVICE_TABLE(spi, at25_spi_ids);
static int at25_probe(struct spi_device *spi)
{
struct at25_data *at25 = NULL;
int err;
int sr;
struct spi_eeprom *pdata;
u8 id[FM25_ID_LEN];
u8 sernum[FM25_SN_LEN];
bool is_fram;
int i;
err = device_property_match_string(&spi->dev, "compatible", "cypress,fm25");
if (err >= 0)
is_fram = true;
else
is_fram = false;
/* Ping the chip ... the status register is pretty portable,
* unlike probing manufacturer IDs. We do expect that system
* firmware didn't write it in the past few milliseconds!
*/
sr = spi_w8r8(spi, AT25_RDSR);
if (sr < 0 || sr & AT25_SR_nRDY) {
dev_dbg(&spi->dev, "rdsr --> %d (%02x)\n", sr, sr);
return -ENXIO;
}
at25 = devm_kzalloc(&spi->dev, sizeof(struct at25_data), GFP_KERNEL);
if (!at25)
return -ENOMEM;
mutex_init(&at25->lock);
at25->spi = spi;
spi_set_drvdata(spi, at25);
/* Chip description */
pdata = dev_get_platdata(&spi->dev);
if (pdata) {
at25->chip = *pdata;
} else {
if (is_fram) {
/* We file fields for FRAM case later on */
} else {
err = at25_fw_to_chip(&spi->dev, &at25->chip);
if (err)
return err;
}
}
if (is_fram) {
/* Get ID of chip */
fm25_aux_read(at25, id, FM25_RDID, FM25_ID_LEN);
if (id[6] != 0xc2) {
dev_err(&spi->dev,
"Error: no Cypress FRAM (id %02x)\n", id[6]);
return -ENODEV;
}
/* set size found in ID */
if (id[7] < 0x21 || id[7] > 0x26) {
dev_err(&spi->dev, "Error: unsupported size (id %02x)\n", id[7]);
return -ENODEV;
}
at25->chip.byte_len = int_pow(2, id[7] - 0x21 + 4) * 1024;
if (at25->chip.byte_len > 64 * 1024)
at25->chip.flags |= EE_ADDR3;
else
at25->chip.flags |= EE_ADDR2;
if (id[8]) {
fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN);
/* swap byte order */
for (i = 0; i < FM25_SN_LEN; i++)
at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i];
}
at25->chip.page_size = PAGE_SIZE;
strncpy(at25->chip.name, "fm25", sizeof(at25->chip.name));
}
/* For now we only support 8/16/24 bit addressing */
if (at25->chip.flags & EE_ADDR1)
at25->addrlen = 1;
else if (at25->chip.flags & EE_ADDR2)
at25->addrlen = 2;
else if (at25->chip.flags & EE_ADDR3)
at25->addrlen = 3;
else {
dev_dbg(&spi->dev, "unsupported address type\n");
return -EINVAL;
}
at25->nvmem_config.type = is_fram ? NVMEM_TYPE_FRAM : NVMEM_TYPE_EEPROM;
at25->nvmem_config.name = dev_name(&spi->dev);
at25->nvmem_config.dev = &spi->dev;
at25->nvmem_config.read_only = at25->chip.flags & EE_READONLY;
at25->nvmem_config.root_only = true;
at25->nvmem_config.owner = THIS_MODULE;
at25->nvmem_config.compat = true;
at25->nvmem_config.base_dev = &spi->dev;
at25->nvmem_config.reg_read = at25_ee_read;
at25->nvmem_config.reg_write = at25_ee_write;
at25->nvmem_config.priv = at25;
at25->nvmem_config.stride = 1;
at25->nvmem_config.word_size = 1;
at25->nvmem_config.size = at25->chip.byte_len;
at25->nvmem = devm_nvmem_register(&spi->dev, &at25->nvmem_config);
if (IS_ERR(at25->nvmem))
return PTR_ERR(at25->nvmem);
dev_info(&spi->dev, "%d %s %s %s%s, pagesize %u\n",
(at25->chip.byte_len < 1024) ? at25->chip.byte_len : (at25->chip.byte_len / 1024),
(at25->chip.byte_len < 1024) ? "Byte" : "KByte",
at25->chip.name, is_fram ? "fram" : "eeprom",
(at25->chip.flags & EE_READONLY) ? " (readonly)" : "",
at25->chip.page_size);
return 0;
}
/*-------------------------------------------------------------------------*/
static struct spi_driver at25_driver = {
.driver = {
.name = "at25",
.of_match_table = at25_of_match,
.dev_groups = sernum_groups,
},
.probe = at25_probe,
.id_table = at25_spi_ids,
};
module_spi_driver(at25_driver);
MODULE_DESCRIPTION("Driver for most SPI EEPROMs");
MODULE_AUTHOR("David Brownell");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:at25");
|