summaryrefslogtreecommitdiff
path: root/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
blob: 2712c4bd549d87a4607f7f7907ae65d74e2a159d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
// SPDX-License-Identifier: GPL-2.0
/*
 * Amlogic G12A USB3 + PCIE Combo PHY driver
 *
 * Copyright (C) 2017 Amlogic, Inc. All rights reserved
 * Copyright (C) 2019 BayLibre, SAS
 * Author: Neil Armstrong <narmstrong@baylibre.com>
 */

#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/platform_device.h>
#include <dt-bindings/phy/phy.h>

#define PHY_R0							0x00
	#define PHY_R0_PCIE_POWER_STATE				GENMASK(4, 0)
	#define PHY_R0_PCIE_USB3_SWITCH				GENMASK(6, 5)

#define PHY_R1							0x04
	#define PHY_R1_PHY_TX1_TERM_OFFSET			GENMASK(4, 0)
	#define PHY_R1_PHY_TX0_TERM_OFFSET			GENMASK(9, 5)
	#define PHY_R1_PHY_RX1_EQ				GENMASK(12, 10)
	#define PHY_R1_PHY_RX0_EQ				GENMASK(15, 13)
	#define PHY_R1_PHY_LOS_LEVEL				GENMASK(20, 16)
	#define PHY_R1_PHY_LOS_BIAS				GENMASK(23, 21)
	#define PHY_R1_PHY_REF_CLKDIV2				BIT(24)
	#define PHY_R1_PHY_MPLL_MULTIPLIER			GENMASK(31, 25)

#define PHY_R2							0x08
	#define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB			GENMASK(5, 0)
	#define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB			GENMASK(11, 6)
	#define PHY_R2_PCS_TX_DEEMPH_GEN1			GENMASK(17, 12)
	#define PHY_R2_PHY_TX_VBOOST_LVL			GENMASK(20, 18)

#define PHY_R4							0x10
	#define PHY_R4_PHY_CR_WRITE				BIT(0)
	#define PHY_R4_PHY_CR_READ				BIT(1)
	#define PHY_R4_PHY_CR_DATA_IN				GENMASK(17, 2)
	#define PHY_R4_PHY_CR_CAP_DATA				BIT(18)
	#define PHY_R4_PHY_CR_CAP_ADDR				BIT(19)

#define PHY_R5							0x14
	#define PHY_R5_PHY_CR_DATA_OUT				GENMASK(15, 0)
	#define PHY_R5_PHY_CR_ACK				BIT(16)
	#define PHY_R5_PHY_BS_OUT				BIT(17)

#define PCIE_RESET_DELAY					500

struct phy_g12a_usb3_pcie_priv {
	struct regmap		*regmap;
	struct regmap		*regmap_cr;
	struct clk		*clk_ref;
	struct reset_control	*reset;
	struct phy		*phy;
	unsigned int		mode;
};

static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = {
	.reg_bits = 8,
	.val_bits = 32,
	.reg_stride = 4,
	.max_register = PHY_R5,
};

static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv,
					  unsigned int addr)
{
	unsigned int val, reg;
	int ret;

	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr);

	regmap_write(priv->regmap, PHY_R4, reg);
	regmap_write(priv->regmap, PHY_R4, reg);

	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	regmap_write(priv->regmap, PHY_R4, reg);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       !(val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	return 0;
}

static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr,
					  unsigned int *data)
{
	struct phy_g12a_usb3_pcie_priv *priv = context;
	unsigned int val;
	int ret;

	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
	if (ret)
		return ret;

	regmap_write(priv->regmap, PHY_R4, 0);
	regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	*data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val);

	regmap_write(priv->regmap, PHY_R4, 0);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       !(val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	return 0;
}

static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr,
					   unsigned int data)
{
	struct phy_g12a_usb3_pcie_priv *priv = context;
	unsigned int val, reg;
	int ret;

	ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr);
	if (ret)
		return ret;

	reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data);

	regmap_write(priv->regmap, PHY_R4, reg);
	regmap_write(priv->regmap, PHY_R4, reg);

	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	regmap_write(priv->regmap, PHY_R4, reg);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK) == 0,
				       5, 1000);
	if (ret)
		return ret;

	regmap_write(priv->regmap, PHY_R4, reg);

	regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK),
				       5, 1000);
	if (ret)
		return ret;

	regmap_write(priv->regmap, PHY_R4, reg);

	ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val,
				       (val & PHY_R5_PHY_CR_ACK) == 0,
				       5, 1000);
	if (ret)
		return ret;

	return 0;
}

static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = {
	.reg_bits = 16,
	.val_bits = 16,
	.reg_read = phy_g12a_usb3_pcie_cr_bus_read,
	.reg_write = phy_g12a_usb3_pcie_cr_bus_write,
	.max_register = 0xffff,
	.disable_locking = true,
};

static int phy_g12a_usb3_init(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
	int data, ret;

	ret = reset_control_reset(priv->reset);
	if (ret)
		return ret;

	/* Switch PHY to USB3 */
	/* TODO figure out how to handle when PCIe was set in the bootloader */
	regmap_update_bits(priv->regmap, PHY_R0,
			   PHY_R0_PCIE_USB3_SWITCH,
			   PHY_R0_PCIE_USB3_SWITCH);

	/*
	 * WORKAROUND: There is SSPHY suspend bug due to
	 * which USB enumerates
	 * in HS mode instead of SS mode. Workaround it by asserting
	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus
	 * mode
	 */
	ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7));
	if (ret)
		return ret;

	ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20);
	if (ret)
		return ret;

	/*
	 * Fix RX Equalization setting as follows
	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
	 * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3
	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
	 */
	ret = regmap_read(priv->regmap_cr, 0x1006, &data);
	if (ret)
		return ret;

	data &= ~BIT(6);
	data |= BIT(7);
	data &= ~(0x7 << 8);
	data |= (0x3 << 8);
	data |= (1 << 11);
	ret = regmap_write(priv->regmap_cr, 0x1006, data);
	if (ret)
		return ret;

	/*
	 * Set EQ and TX launch amplitudes as follows
	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22
	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127
	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
	 */
	ret = regmap_read(priv->regmap_cr, 0x1002, &data);
	if (ret)
		return ret;

	data &= ~0x3f80;
	data |= (0x16 << 7);
	data &= ~0x7f;
	data |= (0x7f | BIT(14));
	ret = regmap_write(priv->regmap_cr, 0x1002, data);
	if (ret)
		return ret;

	/* MPLL_LOOP_CTL.PROP_CNTRL = 8 */
	ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4);
	if (ret)
		return ret;

	regmap_update_bits(priv->regmap, PHY_R2,
			PHY_R2_PHY_TX_VBOOST_LVL,
			FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4));

	regmap_update_bits(priv->regmap, PHY_R1,
			PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL,
			FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) |
			FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9));

	return 0;
}

static int phy_g12a_usb3_pcie_power_on(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);

	if (priv->mode == PHY_TYPE_USB3)
		return 0;

	regmap_update_bits(priv->regmap, PHY_R0,
			   PHY_R0_PCIE_POWER_STATE,
			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));

	return 0;
}

static int phy_g12a_usb3_pcie_power_off(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);

	if (priv->mode == PHY_TYPE_USB3)
		return 0;

	regmap_update_bits(priv->regmap, PHY_R0,
			   PHY_R0_PCIE_POWER_STATE,
			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));

	return 0;
}

static int phy_g12a_usb3_pcie_reset(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
	int ret;

	if (priv->mode == PHY_TYPE_USB3)
		return 0;

	ret = reset_control_assert(priv->reset);
	if (ret)
		return ret;

	udelay(PCIE_RESET_DELAY);

	ret = reset_control_deassert(priv->reset);
	if (ret)
		return ret;

	udelay(PCIE_RESET_DELAY);

	return 0;
}

static int phy_g12a_usb3_pcie_init(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);

	if (priv->mode == PHY_TYPE_USB3)
		return phy_g12a_usb3_init(phy);

	return 0;
}

static int phy_g12a_usb3_pcie_exit(struct phy *phy)
{
	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);

	if (priv->mode == PHY_TYPE_USB3)
		return reset_control_reset(priv->reset);

	return 0;
}

static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
					    struct of_phandle_args *args)
{
	struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev);
	unsigned int mode;

	if (args->args_count < 1) {
		dev_err(dev, "invalid number of arguments\n");
		return ERR_PTR(-EINVAL);
	}

	mode = args->args[0];

	if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) {
		dev_err(dev, "invalid phy mode select argument\n");
		return ERR_PTR(-EINVAL);
	}

	priv->mode = mode;

	return priv->phy;
}

static const struct phy_ops phy_g12a_usb3_pcie_ops = {
	.init		= phy_g12a_usb3_pcie_init,
	.exit		= phy_g12a_usb3_pcie_exit,
	.power_on	= phy_g12a_usb3_pcie_power_on,
	.power_off	= phy_g12a_usb3_pcie_power_off,
	.reset		= phy_g12a_usb3_pcie_reset,
	.owner		= THIS_MODULE,
};

static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)
{
	struct device *dev = &pdev->dev;
	struct device_node *np = dev->of_node;
	struct phy_g12a_usb3_pcie_priv *priv;
	struct phy_provider *phy_provider;
	void __iomem *base;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	base = devm_platform_ioremap_resource(pdev, 0);
	if (IS_ERR(base))
		return PTR_ERR(base);

	priv->regmap = devm_regmap_init_mmio(dev, base,
					     &phy_g12a_usb3_pcie_regmap_conf);
	if (IS_ERR(priv->regmap))
		return PTR_ERR(priv->regmap);

	priv->regmap_cr = devm_regmap_init(dev, NULL, priv,
					   &phy_g12a_usb3_pcie_cr_regmap_conf);
	if (IS_ERR(priv->regmap_cr))
		return PTR_ERR(priv->regmap_cr);

	priv->clk_ref = devm_clk_get_enabled(dev, "ref_clk");
	if (IS_ERR(priv->clk_ref))
		return PTR_ERR(priv->clk_ref);

	priv->reset = devm_reset_control_array_get_exclusive(dev);
	if (IS_ERR(priv->reset))
		return PTR_ERR(priv->reset);

	priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops);
	if (IS_ERR(priv->phy))
		return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");

	phy_set_drvdata(priv->phy, priv);
	dev_set_drvdata(dev, priv);

	phy_provider = devm_of_phy_provider_register(dev,
						     phy_g12a_usb3_pcie_xlate);
	return PTR_ERR_OR_ZERO(phy_provider);
}

static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = {
	{ .compatible = "amlogic,g12a-usb3-pcie-phy", },
	{ },
};
MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match);

static struct platform_driver phy_g12a_usb3_pcie_driver = {
	.probe	= phy_g12a_usb3_pcie_probe,
	.driver	= {
		.name		= "phy-g12a-usb3-pcie",
		.of_match_table	= phy_g12a_usb3_pcie_of_match,
	},
};
module_platform_driver(phy_g12a_usb3_pcie_driver);

MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver");
MODULE_LICENSE("GPL v2");