1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* driver.h -- SoC Regulator driver support.
*
* Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* Regulator Driver Interface.
*/
#ifndef __LINUX_REGULATOR_DRIVER_H_
#define __LINUX_REGULATOR_DRIVER_H_
#include <linux/device.h>
#include <linux/linear_range.h>
#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
#include <linux/ww_mutex.h>
struct gpio_desc;
struct regmap;
struct regulator_dev;
struct regulator_config;
struct regulator_init_data;
struct regulator_enable_gpio;
enum regulator_status {
REGULATOR_STATUS_OFF,
REGULATOR_STATUS_ON,
REGULATOR_STATUS_ERROR,
/* fast/normal/idle/standby are flavors of "on" */
REGULATOR_STATUS_FAST,
REGULATOR_STATUS_NORMAL,
REGULATOR_STATUS_IDLE,
REGULATOR_STATUS_STANDBY,
/* The regulator is enabled but not regulating */
REGULATOR_STATUS_BYPASS,
/* in case that any other status doesn't apply */
REGULATOR_STATUS_UNDEFINED,
};
enum regulator_detection_severity {
/* Hardware shut down voltage outputs if condition is detected */
REGULATOR_SEVERITY_PROT,
/* Hardware is probably damaged/inoperable */
REGULATOR_SEVERITY_ERR,
/* Hardware is still recoverable but recovery action must be taken */
REGULATOR_SEVERITY_WARN,
};
/* Initialize struct linear_range for regulators */
#define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \
{ \
.min = _min_uV, \
.min_sel = _min_sel, \
.max_sel = _max_sel, \
.step = _step_uV, \
}
/**
* struct regulator_ops - regulator operations.
*
* @enable: Configure the regulator as enabled.
* @disable: Configure the regulator as disabled.
* @is_enabled: Return 1 if the regulator is enabled, 0 if not.
* May also return negative errno.
*
* @set_voltage: Set the voltage for the regulator within the range specified.
* The driver should select the voltage closest to min_uV.
* @set_voltage_sel: Set the voltage for the regulator using the specified
* selector.
* @map_voltage: Convert a voltage into a selector
* @get_voltage: Return the currently configured voltage for the regulator;
* return -ENOTRECOVERABLE if regulator can't be read at
* bootup and hasn't been set yet.
* @get_voltage_sel: Return the currently configured voltage selector for the
* regulator; return -ENOTRECOVERABLE if regulator can't
* be read at bootup and hasn't been set yet.
* @list_voltage: Return one of the supported voltages, in microvolts; zero
* if the selector indicates a voltage that is unusable on this system;
* or negative errno. Selectors range from zero to one less than
* regulator_desc.n_voltages. Voltages may be reported in any order.
*
* @set_current_limit: Configure a limit for a current-limited regulator.
* The driver should select the current closest to max_uA.
* @get_current_limit: Get the configured limit for a current-limited regulator.
* @set_input_current_limit: Configure an input limit.
*
* @set_over_current_protection: Support enabling of and setting limits for over
* current situation detection. Detection can be configured for three
* levels of severity.
* REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s).
* REGULATOR_SEVERITY_ERR should indicate that over-current situation is
* caused by an unrecoverable error but HW does not perform
* automatic shut down.
* REGULATOR_SEVERITY_WARN should indicate situation where hardware is
* still believed to not be damaged but that a board sepcific
* recovery action is needed. If lim_uA is 0 the limit should not
* be changed but the detection should just be enabled/disabled as
* is requested.
* @set_over_voltage_protection: Support enabling of and setting limits for over
* voltage situation detection. Detection can be configured for same
* severities as over current protection. Units of uV.
* @set_under_voltage_protection: Support enabling of and setting limits for
* under voltage situation detection. Detection can be configured for same
* severities as over current protection. Units of uV.
* @set_thermal_protection: Support enabling of and setting limits for over
* temperature situation detection.Detection can be configured for same
* severities as over current protection. Units of degree Kelvin.
*
* @set_active_discharge: Set active discharge enable/disable of regulators.
*
* @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
* @get_error_flags: Get the current error(s) for the regulator.
* @get_status: Return actual (not as-configured) status of regulator, as a
* REGULATOR_STATUS value (or negative errno)
* @get_optimum_mode: Get the most efficient operating mode for the regulator
* when running with the specified parameters.
* @set_load: Set the load for the regulator.
*
* @set_bypass: Set the regulator in bypass mode.
* @get_bypass: Get the regulator bypass mode state.
*
* @enable_time: Time taken for the regulator voltage output voltage to
* stabilise after being enabled, in microseconds.
* @set_ramp_delay: Set the ramp delay for the regulator. The driver should
* select ramp delay equal to or less than(closest) ramp_delay.
* @set_voltage_time: Time taken for the regulator voltage output voltage
* to stabilise after being set to a new value, in microseconds.
* The function receives the from and to voltage as input, it
* should return the worst case.
* @set_voltage_time_sel: Time taken for the regulator voltage output voltage
* to stabilise after being set to a new value, in microseconds.
* The function receives the from and to voltage selector as
* input, it should return the worst case.
* @set_soft_start: Enable soft start for the regulator.
*
* @set_suspend_voltage: Set the voltage for the regulator when the system
* is suspended.
* @set_suspend_enable: Mark the regulator as enabled when the system is
* suspended.
* @set_suspend_disable: Mark the regulator as disabled when the system is
* suspended.
* @set_suspend_mode: Set the operating mode for the regulator when the
* system is suspended.
* @resume: Resume operation of suspended regulator.
* @set_pull_down: Configure the regulator to pull down when the regulator
* is disabled.
*
* This struct describes regulator operations which can be implemented by
* regulator chip drivers.
*/
struct regulator_ops {
/* enumerate supported voltages */
int (*list_voltage) (struct regulator_dev *, unsigned selector);
/* get/set regulator voltage */
int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
unsigned *selector);
int (*map_voltage)(struct regulator_dev *, int min_uV, int max_uV);
int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
int (*get_voltage) (struct regulator_dev *);
int (*get_voltage_sel) (struct regulator_dev *);
/* get/set regulator current */
int (*set_current_limit) (struct regulator_dev *,
int min_uA, int max_uA);
int (*get_current_limit) (struct regulator_dev *);
int (*set_input_current_limit) (struct regulator_dev *, int lim_uA);
int (*set_over_current_protection)(struct regulator_dev *, int lim_uA,
int severity, bool enable);
int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV,
int severity, bool enable);
int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV,
int severity, bool enable);
int (*set_thermal_protection)(struct regulator_dev *, int lim,
int severity, bool enable);
int (*set_active_discharge)(struct regulator_dev *, bool enable);
/* enable/disable regulator */
int (*enable) (struct regulator_dev *);
int (*disable) (struct regulator_dev *);
int (*is_enabled) (struct regulator_dev *);
/* get/set regulator operating mode (defined in consumer.h) */
int (*set_mode) (struct regulator_dev *, unsigned int mode);
unsigned int (*get_mode) (struct regulator_dev *);
/* retrieve current error flags on the regulator */
int (*get_error_flags)(struct regulator_dev *, unsigned int *flags);
/* Time taken to enable or set voltage on the regulator */
int (*enable_time) (struct regulator_dev *);
int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
int (*set_voltage_time) (struct regulator_dev *, int old_uV,
int new_uV);
int (*set_voltage_time_sel) (struct regulator_dev *,
unsigned int old_selector,
unsigned int new_selector);
int (*set_soft_start) (struct regulator_dev *);
/* report regulator status ... most other accessors report
* control inputs, this reports results of combining inputs
* from Linux (and other sources) with the actual load.
* returns REGULATOR_STATUS_* or negative errno.
*/
int (*get_status)(struct regulator_dev *);
/* get most efficient regulator operating mode for load */
unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV,
int output_uV, int load_uA);
/* set the load on the regulator */
int (*set_load)(struct regulator_dev *, int load_uA);
/* control and report on bypass mode */
int (*set_bypass)(struct regulator_dev *dev, bool enable);
int (*get_bypass)(struct regulator_dev *dev, bool *enable);
/* the operations below are for configuration of regulator state when
* its parent PMIC enters a global STANDBY/HIBERNATE state */
/* set regulator suspend voltage */
int (*set_suspend_voltage) (struct regulator_dev *, int uV);
/* enable/disable regulator in suspend state */
int (*set_suspend_enable) (struct regulator_dev *);
int (*set_suspend_disable) (struct regulator_dev *);
/* set regulator suspend operating mode (defined in consumer.h) */
int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
int (*resume)(struct regulator_dev *rdev);
int (*set_pull_down) (struct regulator_dev *);
};
/*
* Regulators can either control voltage or current.
*/
enum regulator_type {
REGULATOR_VOLTAGE,
REGULATOR_CURRENT,
};
/**
* struct regulator_desc - Static regulator descriptor
*
* Each regulator registered with the core is described with a
* structure of this type and a struct regulator_config. This
* structure contains the non-varying parts of the regulator
* description.
*
* @name: Identifying name for the regulator.
* @supply_name: Identifying the regulator supply
* @of_match: Name used to identify regulator in DT.
* @of_match_full_name: A flag to indicate that the of_match string, if
* present, should be matched against the node full_name.
* @regulators_node: Name of node containing regulator definitions in DT.
* @of_parse_cb: Optional callback called only if of_match is present.
* Will be called for each regulator parsed from DT, during
* init_data parsing.
* The regulator_config passed as argument to the callback will
* be a copy of config passed to regulator_register, valid only
* for this particular call. Callback may freely change the
* config but it cannot store it for later usage.
* Callback should return 0 on success or negative ERRNO
* indicating failure.
* @id: Numerical identifier for the regulator.
* @ops: Regulator operations table.
* @irq: Interrupt number for the regulator.
* @type: Indicates if the regulator is a voltage or current regulator.
* @owner: Module providing the regulator, used for refcounting.
*
* @continuous_voltage_range: Indicates if the regulator can set any
* voltage within constrains range.
* @n_voltages: Number of selectors available for ops.list_voltage().
* @n_current_limits: Number of selectors available for current limits
*
* @min_uV: Voltage given by the lowest selector (if linear mapping)
* @uV_step: Voltage increase with each selector (if linear mapping)
* @linear_min_sel: Minimal selector for starting linear mapping
* @fixed_uV: Fixed voltage of rails.
* @ramp_delay: Time to settle down after voltage change (unit: uV/us)
* @min_dropout_uV: The minimum dropout voltage this regulator can handle
* @linear_ranges: A constant table of possible voltage ranges.
* @linear_range_selectors: A constant table of voltage range selectors.
* If pickable ranges are used each range must
* have corresponding selector here.
* @n_linear_ranges: Number of entries in the @linear_ranges (and in
* linear_range_selectors if used) table(s).
* @volt_table: Voltage mapping table (if table based mapping)
* @curr_table: Current limit mapping table (if table based mapping)
*
* @vsel_range_reg: Register for range selector when using pickable ranges
* and ``regulator_map_*_voltage_*_pickable`` functions.
* @vsel_range_mask: Mask for register bitfield used for range selector
* @vsel_reg: Register for selector when using ``regulator_map_*_voltage_*``
* @vsel_mask: Mask for register bitfield used for selector
* @vsel_step: Specify the resolution of selector stepping when setting
* voltage. If 0, then no stepping is done (requested selector is
* set directly), if >0 then the regulator API will ramp the
* voltage up/down gradually each time increasing/decreasing the
* selector by the specified step value.
* @csel_reg: Register for current limit selector using regmap set_current_limit
* @csel_mask: Mask for register bitfield used for current limit selector
* @apply_reg: Register for initiate voltage change on the output when
* using regulator_set_voltage_sel_regmap
* @apply_bit: Register bitfield used for initiate voltage change on the
* output when using regulator_set_voltage_sel_regmap
* @enable_reg: Register for control when using regmap enable/disable ops
* @enable_mask: Mask for control when using regmap enable/disable ops
* @enable_val: Enabling value for control when using regmap enable/disable ops
* @disable_val: Disabling value for control when using regmap enable/disable ops
* @enable_is_inverted: A flag to indicate set enable_mask bits to disable
* when using regulator_enable_regmap and friends APIs.
* @bypass_reg: Register for control when using regmap set_bypass
* @bypass_mask: Mask for control when using regmap set_bypass
* @bypass_val_on: Enabling value for control when using regmap set_bypass
* @bypass_val_off: Disabling value for control when using regmap set_bypass
* @active_discharge_off: Enabling value for control when using regmap
* set_active_discharge
* @active_discharge_on: Disabling value for control when using regmap
* set_active_discharge
* @active_discharge_mask: Mask for control when using regmap
* set_active_discharge
* @active_discharge_reg: Register for control when using regmap
* set_active_discharge
* @soft_start_reg: Register for control when using regmap set_soft_start
* @soft_start_mask: Mask for control when using regmap set_soft_start
* @soft_start_val_on: Enabling value for control when using regmap
* set_soft_start
* @pull_down_reg: Register for control when using regmap set_pull_down
* @pull_down_mask: Mask for control when using regmap set_pull_down
* @pull_down_val_on: Enabling value for control when using regmap
* set_pull_down
*
* @ramp_reg: Register for controlling the regulator ramp-rate.
* @ramp_mask: Bitmask for the ramp-rate control register.
* @ramp_delay_table: Table for mapping the regulator ramp-rate values. Values
* should be given in units of V/S (uV/uS). See the
* regulator_set_ramp_delay_regmap().
*
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
*
* @poll_enabled_time: The polling interval (in uS) to use while checking that
* the regulator was actually enabled. Max upto enable_time.
*
* @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
*/
struct regulator_desc {
const char *name;
const char *supply_name;
const char *of_match;
bool of_match_full_name;
const char *regulators_node;
int (*of_parse_cb)(struct device_node *,
const struct regulator_desc *,
struct regulator_config *);
int id;
unsigned int continuous_voltage_range:1;
unsigned n_voltages;
unsigned int n_current_limits;
const struct regulator_ops *ops;
int irq;
enum regulator_type type;
struct module *owner;
unsigned int min_uV;
unsigned int uV_step;
unsigned int linear_min_sel;
int fixed_uV;
unsigned int ramp_delay;
int min_dropout_uV;
const struct linear_range *linear_ranges;
const unsigned int *linear_range_selectors;
int n_linear_ranges;
const unsigned int *volt_table;
const unsigned int *curr_table;
unsigned int vsel_range_reg;
unsigned int vsel_range_mask;
unsigned int vsel_reg;
unsigned int vsel_mask;
unsigned int vsel_step;
unsigned int csel_reg;
unsigned int csel_mask;
unsigned int apply_reg;
unsigned int apply_bit;
unsigned int enable_reg;
unsigned int enable_mask;
unsigned int enable_val;
unsigned int disable_val;
bool enable_is_inverted;
unsigned int bypass_reg;
unsigned int bypass_mask;
unsigned int bypass_val_on;
unsigned int bypass_val_off;
unsigned int active_discharge_on;
unsigned int active_discharge_off;
unsigned int active_discharge_mask;
unsigned int active_discharge_reg;
unsigned int soft_start_reg;
unsigned int soft_start_mask;
unsigned int soft_start_val_on;
unsigned int pull_down_reg;
unsigned int pull_down_mask;
unsigned int pull_down_val_on;
unsigned int ramp_reg;
unsigned int ramp_mask;
const unsigned int *ramp_delay_table;
unsigned int n_ramp_values;
unsigned int enable_time;
unsigned int off_on_delay;
unsigned int poll_enabled_time;
unsigned int (*of_map_mode)(unsigned int mode);
};
/**
* struct regulator_config - Dynamic regulator descriptor
*
* Each regulator registered with the core is described with a
* structure of this type and a struct regulator_desc. This structure
* contains the runtime variable parts of the regulator description.
*
* @dev: struct device for the regulator
* @init_data: platform provided init data, passed through by driver
* @driver_data: private regulator data
* @of_node: OpenFirmware node to parse for device tree bindings (may be
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regmap() is
* insufficient.
* @ena_gpiod: GPIO controlling regulator enable.
*/
struct regulator_config {
struct device *dev;
const struct regulator_init_data *init_data;
void *driver_data;
struct device_node *of_node;
struct regmap *regmap;
struct gpio_desc *ena_gpiod;
};
/**
* struct regulator_err_state - regulator error/notification status
*
* @rdev: Regulator which status the struct indicates.
* @notifs: Events which have occurred on the regulator.
* @errors: Errors which are active on the regulator.
* @possible_errs: Errors which can be signaled (by given IRQ).
*/
struct regulator_err_state {
struct regulator_dev *rdev;
unsigned long notifs;
unsigned long errors;
int possible_errs;
};
/**
* struct regulator_irq_data - regulator error/notification status data
*
* @states: Status structs for each of the associated regulators.
* @num_states: Amount of associated regulators.
* @data: Driver data pointer given at regulator_irq_desc.
* @opaque: Value storage for IC driver. Core does not update this. ICs
* may want to store status register value here at map_event and
* compare contents at 'renable' callback to see if new problems
* have been added to status. If that is the case it may be
* desirable to return REGULATOR_ERROR_CLEARED and not
* REGULATOR_ERROR_ON to allow IRQ fire again and to generate
* notifications also for the new issues.
*
* This structure is passed to 'map_event' and 'renable' callbacks for
* reporting regulator status to core.
*/
struct regulator_irq_data {
struct regulator_err_state *states;
int num_states;
void *data;
long opaque;
};
/**
* struct regulator_irq_desc - notification sender for IRQ based events.
*
* @name: The visible name for the IRQ
* @fatal_cnt: If this IRQ is used to signal HW damaging condition it may be
* best to shut-down regulator(s) or reboot the SOC if error
* handling is repeatedly failing. If fatal_cnt is given the IRQ
* handling is aborted if it fails for fatal_cnt times and die()
* callback (if populated) or BUG() is called to try to prevent
* further damage.
* @reread_ms: The time which is waited before attempting to re-read status
* at the worker if IC reading fails. Immediate re-read is done
* if time is not specified.
* @irq_off_ms: The time which IRQ is kept disabled before re-evaluating the
* status for devices which keep IRQ disabled for duration of the
* error. If this is not given the IRQ is left enabled and renable
* is not called.
* @skip_off: If set to true the IRQ handler will attempt to check if any of
* the associated regulators are enabled prior to taking other
* actions. If no regulators are enabled and this is set to true
* a spurious IRQ is assumed and IRQ_NONE is returned.
* @high_prio: Boolean to indicate that high priority WQ should be used.
* @data: Driver private data pointer which will be passed as such to
* the renable, map_event and die callbacks in regulator_irq_data.
* @die: Protection callback. If IC status reading or recovery actions
* fail fatal_cnt times this callback or BUG() is called. This
* callback should implement a final protection attempt like
* disabling the regulator. If protection succeeded this may
* return 0. If anything else is returned the core assumes final
* protection failed and calls BUG() as a last resort.
* @map_event: Driver callback to map IRQ status into regulator devices with
* events / errors. NOTE: callback MUST initialize both the
* errors and notifs for all rdevs which it signals having
* active events as core does not clean the map data.
* REGULATOR_FAILED_RETRY can be returned to indicate that the
* status reading from IC failed. If this is repeated for
* fatal_cnt times the core will call die() callback or power-off
* the system as a last resort to protect the HW.
* @renable: Optional callback to check status (if HW supports that) before
* re-enabling IRQ. If implemented this should clear the error
* flags so that errors fetched by regulator_get_error_flags()
* are updated. If callback is not implemented then errors are
* assumed to be cleared and IRQ is re-enabled.
* REGULATOR_FAILED_RETRY can be returned to
* indicate that the status reading from IC failed. If this is
* repeated for 'fatal_cnt' times the core will call die()
* callback or if die() is not populated then attempt to power-off
* the system as a last resort to protect the HW.
* Returning zero indicates that the problem in HW has been solved
* and IRQ will be re-enabled. Returning REGULATOR_ERROR_ON
* indicates the error condition is still active and keeps IRQ
* disabled. Please note that returning REGULATOR_ERROR_ON does
* not retrigger evaluating what events are active or resending
* notifications. If this is needed you probably want to return
* zero and allow IRQ to retrigger causing events to be
* re-evaluated and re-sent.
*
* This structure is used for registering regulator IRQ notification helper.
*/
struct regulator_irq_desc {
const char *name;
int irq_flags;
int fatal_cnt;
int reread_ms;
int irq_off_ms;
bool skip_off;
bool high_prio;
void *data;
int (*die)(struct regulator_irq_data *rid);
int (*map_event)(int irq, struct regulator_irq_data *rid,
unsigned long *dev_mask);
int (*renable)(struct regulator_irq_data *rid);
};
/*
* Return values for regulator IRQ helpers.
*/
enum {
REGULATOR_ERROR_CLEARED,
REGULATOR_FAILED_RETRY,
REGULATOR_ERROR_ON,
};
/*
* struct coupling_desc
*
* Describes coupling of regulators. Each regulator should have
* at least a pointer to itself in coupled_rdevs array.
* When a new coupled regulator is resolved, n_resolved is
* incremented.
*/
struct coupling_desc {
struct regulator_dev **coupled_rdevs;
struct regulator_coupler *coupler;
int n_resolved;
int n_coupled;
};
/*
* struct regulator_dev
*
* Voltage / Current regulator class device. One for each
* regulator.
*
* This should *not* be used directly by anything except the regulator
* core and notification injection (which should take the mutex and do
* no other direct access).
*/
struct regulator_dev {
const struct regulator_desc *desc;
int exclusive;
u32 use_count;
u32 open_count;
u32 bypass_count;
/* lists we belong to */
struct list_head list; /* list of all regulators */
/* lists we own */
struct list_head consumer_list; /* consumers we supply */
struct coupling_desc coupling_desc;
struct blocking_notifier_head notifier;
struct ww_mutex mutex; /* consumer lock */
struct task_struct *mutex_owner;
int ref_cnt;
struct module *owner;
struct device dev;
struct regulation_constraints *constraints;
struct regulator *supply; /* for tree */
const char *supply_name;
struct regmap *regmap;
struct delayed_work disable_work;
void *reg_data; /* regulator_dev data */
struct dentry *debugfs;
struct regulator_enable_gpio *ena_pin;
unsigned int ena_gpio_state:1;
unsigned int is_switch:1;
/* time when this regulator was disabled last time */
ktime_t last_off;
int cached_err;
bool use_cached_err;
spinlock_t err_lock;
};
struct regulator_dev *
regulator_register(const struct regulator_desc *regulator_desc,
const struct regulator_config *config);
struct regulator_dev *
devm_regulator_register(struct device *dev,
const struct regulator_desc *regulator_desc,
const struct regulator_config *config);
void regulator_unregister(struct regulator_dev *rdev);
int regulator_notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data);
void *devm_regulator_irq_helper(struct device *dev,
const struct regulator_irq_desc *d, int irq,
int irq_flags, int common_errs,
int *per_rdev_errs, struct regulator_dev **rdev,
int rdev_amount);
void *regulator_irq_helper(struct device *dev,
const struct regulator_irq_desc *d, int irq,
int irq_flags, int common_errs, int *per_rdev_errs,
struct regulator_dev **rdev, int rdev_amount);
void regulator_irq_helper_cancel(void **handle);
void *rdev_get_drvdata(struct regulator_dev *rdev);
struct device *rdev_get_dev(struct regulator_dev *rdev);
struct regmap *rdev_get_regmap(struct regulator_dev *rdev);
int rdev_get_id(struct regulator_dev *rdev);
int regulator_mode_to_status(unsigned int);
int regulator_list_voltage_linear(struct regulator_dev *rdev,
unsigned int selector);
int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
unsigned int selector);
int regulator_list_voltage_linear_range(struct regulator_dev *rdev,
unsigned int selector);
int regulator_list_voltage_table(struct regulator_dev *rdev,
unsigned int selector);
int regulator_map_voltage_linear(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_iterate(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_map_voltage_ascend(struct regulator_dev *rdev,
int min_uV, int max_uV);
int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev);
int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
unsigned int sel);
int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
int regulator_is_enabled_regmap(struct regulator_dev *rdev);
int regulator_enable_regmap(struct regulator_dev *rdev);
int regulator_disable_regmap(struct regulator_dev *rdev);
int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector);
int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable);
int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable);
int regulator_set_soft_start_regmap(struct regulator_dev *rdev);
int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
bool enable);
int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
int min_uA, int max_uA);
int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay);
int regulator_sync_voltage_rdev(struct regulator_dev *rdev);
/*
* Helper functions intended to be used by regulator drivers prior registering
* their regulators.
*/
int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
unsigned int selector);
int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
unsigned int selector);
#ifdef CONFIG_REGULATOR
const char *rdev_get_name(struct regulator_dev *rdev);
#else
static inline const char *rdev_get_name(struct regulator_dev *rdev)
{
return NULL;
}
#endif
#endif
|