ASoC: rt715: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

2 files changed, 25 insertions, 17 deletions

diff --git a/sound/soc/codecs/rt715-sdw.c b/sound/soc/codecs/rt715-sdw.c
index d09b3061096d..21f37babd148 100644
--- a/sound/soc/codecs/rt715-sdw.c
+++ b/sound/soc/codecs/rt715-sdw.c
@@ -513,10 +513,7 @@ static int rt715_sdw_probe(struct sdw_slave *slave,
 
 static int rt715_sdw_remove(struct sdw_slave *slave)
 {
-	struct rt715_priv *rt715 = dev_get_drvdata(&slave->dev);
-
-	if (rt715->first_hw_init)
-		pm_runtime_disable(&slave->dev);
+	pm_runtime_disable(&slave->dev);
 
 	return 0;
 }
diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
index 1bd2fe8aa625..79416bb48814 100644
--- a/sound/soc/codecs/rt715.c
+++ b/sound/soc/codecs/rt715.c
@@ -740,8 +740,12 @@ static int rt715_set_bias_level(struct snd_soc_component *component,
 
 static int rt715_probe(struct snd_soc_component *component)
 {
+	struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
 	int ret;
 
+	if (!rt715->first_hw_init)
+		return 0;
+
 	ret = pm_runtime_resume(component->dev);
 	if (ret < 0 && ret != -EACCES)
 		return ret;
@@ -997,8 +1001,25 @@ int rt715_init(struct device *dev, struct regmap *sdw_regmap,
 						&soc_codec_dev_rt715,
 						rt715_dai,
 						ARRAY_SIZE(rt715_dai));
+	if (ret < 0)
+		return ret;
 
-	return ret;
+	/* set autosuspend parameters */
+	pm_runtime_set_autosuspend_delay(dev, 3000);
+	pm_runtime_use_autosuspend(dev);
+
+	/* make sure the device does not suspend immediately */
+	pm_runtime_mark_last_busy(dev);
+
+	pm_runtime_enable(dev);
+
+	/* important note: the device is NOT tagged as 'active' and will remain
+	 * 'suspended' until the hardware is enumerated/initialized. This is required
+	 * to make sure the ASoC framework use of pm_runtime_get_sync() does not silently
+	 * fail with -EACCESS because of race conditions between card creation and enumeration
+	 */
+
+	return 0;
 }
 
 int rt715_io_init(struct device *dev, struct sdw_slave *slave)
@@ -1011,22 +1032,12 @@ int rt715_io_init(struct device *dev, struct sdw_slave *slave)
 	regcache_cache_only(rt715->regmap, false);
 
 	/*
-	 * PM runtime is only enabled when a Slave reports as Attached
+	 *  PM runtime status is marked as 'active' only when a Slave reports as Attached
 	 */
-	if (!rt715->first_hw_init) {
-		/* set autosuspend parameters */
-		pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
-		pm_runtime_use_autosuspend(&slave->dev);
-
+	if (!rt715->first_hw_init)
 		/* update count of parent 'active' children */
 		pm_runtime_set_active(&slave->dev);
 
-		/* make sure the device does not suspend immediately */
-		pm_runtime_mark_last_busy(&slave->dev);
-
-		pm_runtime_enable(&slave->dev);
-	}
-
 	pm_runtime_get_noresume(&slave->dev);
 
 	/* Mute nid=08h/09h */