summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMatti Vaittinen <matti.vaittinen@fi.rohmeurope.com>2018-08-03 14:08:14 +0300
committerLee Jones <lee.jones@linaro.org>2018-08-16 12:13:37 +0300
commit30107fa6908b6c2747ee9100b40af813f99483c3 (patch)
tree325d74408a631a3dfa5098bd8ca8744d39ffbb0b
parentf863ae594d33e57aa12cdde47e767e6e7942ee51 (diff)
downloadlinux-30107fa6908b6c2747ee9100b40af813f99483c3.tar.xz
mfd: bd71837: Core driver for ROHM BD71837 PMIC
ROHM BD71837 PMIC MFD driver providing interrupts and support for three subsystems: - clk - Regulators - input/power-key Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-rw-r--r--drivers/mfd/Kconfig13
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/rohm-bd718x7.c211
-rw-r--r--include/linux/mfd/rohm-bd718x7.h332
4 files changed, 557 insertions, 0 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..11841f4b7b2b 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1817,6 +1817,19 @@ config MFD_STW481X
in various ST Microelectronics and ST-Ericsson embedded
Nomadik series.
+config MFD_ROHM_BD718XX
+ tristate "ROHM BD71837 Power Management IC"
+ depends on I2C=y
+ depends on OF
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ Select this option to get support for the ROHM BD71837
+ Power Management ICs. BD71837 is designed to power processors like
+ NXP i.MX8. It contains 8 BUCK outputs and 7 LDOs, voltage monitoring
+ and emergency shut down as well as 32,768KHz clock output.
+
config MFD_STM32_LPTIMER
tristate "Support for STM32 Low-Power Timer"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..5856a9489cbd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -239,4 +239,5 @@ obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o
obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
+obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
new file mode 100644
index 000000000000..75c8ec659547
--- /dev/null
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2018 ROHM Semiconductors
+//
+// ROHM BD71837MWV PMIC driver
+//
+// Datasheet available from
+// https://www.rohm.com/datasheet/BD71837MWV/bd71837mwv-e
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+/*
+ * gpio_keys.h requires definiton of bool. It is brought in
+ * by above includes. Keep this as last until gpio_keys.h gets fixed.
+ */
+#include <linux/gpio_keys.h>
+
+static const u8 supported_revisions[] = { 0xA2 /* BD71837 */ };
+
+static struct gpio_keys_button button = {
+ .code = KEY_POWER,
+ .gpio = -1,
+ .type = EV_KEY,
+};
+
+static struct gpio_keys_platform_data bd718xx_powerkey_data = {
+ .buttons = &button,
+ .nbuttons = 1,
+ .name = "bd718xx-pwrkey",
+};
+
+static struct mfd_cell bd71837_mfd_cells[] = {
+ {
+ .name = "gpio-keys",
+ .platform_data = &bd718xx_powerkey_data,
+ .pdata_size = sizeof(bd718xx_powerkey_data),
+ },
+ { .name = "bd71837-clk", },
+ { .name = "bd71837-pmic", },
+};
+
+static const struct regmap_irq bd71837_irqs[] = {
+ REGMAP_IRQ_REG(BD71837_INT_SWRST, 0, BD71837_INT_SWRST_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_PWRBTN_S, 0, BD71837_INT_PWRBTN_S_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_PWRBTN_L, 0, BD71837_INT_PWRBTN_L_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_PWRBTN, 0, BD71837_INT_PWRBTN_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_WDOG, 0, BD71837_INT_WDOG_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_ON_REQ, 0, BD71837_INT_ON_REQ_MASK),
+ REGMAP_IRQ_REG(BD71837_INT_STBY_REQ, 0, BD71837_INT_STBY_REQ_MASK),
+};
+
+static struct regmap_irq_chip bd71837_irq_chip = {
+ .name = "bd71837-irq",
+ .irqs = bd71837_irqs,
+ .num_irqs = ARRAY_SIZE(bd71837_irqs),
+ .num_regs = 1,
+ .irq_reg_stride = 1,
+ .status_base = BD71837_REG_IRQ,
+ .mask_base = BD71837_REG_MIRQ,
+ .ack_base = BD71837_REG_IRQ,
+ .init_ack_masked = true,
+ .mask_invert = false,
+};
+
+static const struct regmap_range pmic_status_range = {
+ .range_min = BD71837_REG_IRQ,
+ .range_max = BD71837_REG_POW_STATE,
+};
+
+static const struct regmap_access_table volatile_regs = {
+ .yes_ranges = &pmic_status_range,
+ .n_yes_ranges = 1,
+};
+
+static const struct regmap_config bd71837_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &volatile_regs,
+ .max_register = BD71837_MAX_REGISTER - 1,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int bd71837_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct bd71837 *bd71837;
+ int ret, i;
+ unsigned int val;
+
+ bd71837 = devm_kzalloc(&i2c->dev, sizeof(struct bd71837), GFP_KERNEL);
+
+ if (!bd71837)
+ return -ENOMEM;
+
+ bd71837->chip_irq = i2c->irq;
+
+ if (!bd71837->chip_irq) {
+ dev_err(&i2c->dev, "No IRQ configured\n");
+ return -EINVAL;
+ }
+
+ bd71837->dev = &i2c->dev;
+ dev_set_drvdata(&i2c->dev, bd71837);
+
+ bd71837->regmap = devm_regmap_init_i2c(i2c, &bd71837_regmap_config);
+ if (IS_ERR(bd71837->regmap)) {
+ dev_err(&i2c->dev, "regmap initialization failed\n");
+ return PTR_ERR(bd71837->regmap);
+ }
+
+ ret = regmap_read(bd71837->regmap, BD71837_REG_REV, &val);
+ if (ret) {
+ dev_err(&i2c->dev, "Read BD71837_REG_DEVICE failed\n");
+ return ret;
+ }
+ for (i = 0; i < ARRAY_SIZE(supported_revisions); i++)
+ if (supported_revisions[i] == val)
+ break;
+
+ if (i == ARRAY_SIZE(supported_revisions)) {
+ dev_err(&i2c->dev, "Unsupported chip revision\n");
+ return -ENODEV;
+ }
+
+ ret = devm_regmap_add_irq_chip(&i2c->dev, bd71837->regmap,
+ bd71837->chip_irq, IRQF_ONESHOT, 0,
+ &bd71837_irq_chip, &bd71837->irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add irq_chip\n");
+ return ret;
+ }
+
+ /* Configure short press to 10 milliseconds */
+ ret = regmap_update_bits(bd71837->regmap,
+ BD71837_REG_PWRONCONFIG0,
+ BD718XX_PWRBTN_PRESS_DURATION_MASK,
+ BD718XX_PWRBTN_SHORT_PRESS_10MS);
+ if (ret) {
+ dev_err(&i2c->dev,
+ "Failed to configure button short press timeout\n");
+ return ret;
+ }
+
+ /* Configure long press to 10 seconds */
+ ret = regmap_update_bits(bd71837->regmap,
+ BD71837_REG_PWRONCONFIG1,
+ BD718XX_PWRBTN_PRESS_DURATION_MASK,
+ BD718XX_PWRBTN_LONG_PRESS_10S);
+
+ if (ret) {
+ dev_err(&i2c->dev,
+ "Failed to configure button long press timeout\n");
+ return ret;
+ }
+
+ ret = regmap_irq_get_virq(bd71837->irq_data, BD71837_INT_PWRBTN_S);
+
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to get the IRQ\n");
+ return ret;
+ }
+
+ button.irq = ret;
+
+ ret = devm_mfd_add_devices(bd71837->dev, PLATFORM_DEVID_AUTO,
+ bd71837_mfd_cells,
+ ARRAY_SIZE(bd71837_mfd_cells), NULL, 0,
+ regmap_irq_get_domain(bd71837->irq_data));
+ if (ret)
+ dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+ return ret;
+}
+
+static const struct of_device_id bd71837_of_match[] = {
+ { .compatible = "rohm,bd71837", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bd71837_of_match);
+
+static struct i2c_driver bd71837_i2c_driver = {
+ .driver = {
+ .name = "rohm-bd718x7",
+ .of_match_table = bd71837_of_match,
+ },
+ .probe = bd71837_i2c_probe,
+};
+
+static int __init bd71837_i2c_init(void)
+{
+ return i2c_add_driver(&bd71837_i2c_driver);
+}
+
+/* Initialise early so consumer devices can complete system boot */
+subsys_initcall(bd71837_i2c_init);
+
+static void __exit bd71837_i2c_exit(void)
+{
+ i2c_del_driver(&bd71837_i2c_driver);
+}
+module_exit(bd71837_i2c_exit);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD71837 Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
new file mode 100644
index 000000000000..a528747f8aed
--- /dev/null
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -0,0 +1,332 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2018 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD71837_H__
+#define __LINUX_MFD_BD71837_H__
+
+#include <linux/regmap.h>
+
+enum {
+ BD71837_BUCK1 = 0,
+ BD71837_BUCK2,
+ BD71837_BUCK3,
+ BD71837_BUCK4,
+ BD71837_BUCK5,
+ BD71837_BUCK6,
+ BD71837_BUCK7,
+ BD71837_BUCK8,
+ BD71837_LDO1,
+ BD71837_LDO2,
+ BD71837_LDO3,
+ BD71837_LDO4,
+ BD71837_LDO5,
+ BD71837_LDO6,
+ BD71837_LDO7,
+ BD71837_REGULATOR_CNT,
+};
+
+#define BD71837_BUCK1_VOLTAGE_NUM 0x40
+#define BD71837_BUCK2_VOLTAGE_NUM 0x40
+#define BD71837_BUCK3_VOLTAGE_NUM 0x40
+#define BD71837_BUCK4_VOLTAGE_NUM 0x40
+
+#define BD71837_BUCK5_VOLTAGE_NUM 0x08
+#define BD71837_BUCK6_VOLTAGE_NUM 0x04
+#define BD71837_BUCK7_VOLTAGE_NUM 0x08
+#define BD71837_BUCK8_VOLTAGE_NUM 0x40
+
+#define BD71837_LDO1_VOLTAGE_NUM 0x04
+#define BD71837_LDO2_VOLTAGE_NUM 0x02
+#define BD71837_LDO3_VOLTAGE_NUM 0x10
+#define BD71837_LDO4_VOLTAGE_NUM 0x10
+#define BD71837_LDO5_VOLTAGE_NUM 0x10
+#define BD71837_LDO6_VOLTAGE_NUM 0x10
+#define BD71837_LDO7_VOLTAGE_NUM 0x10
+
+enum {
+ BD71837_REG_REV = 0x00,
+ BD71837_REG_SWRESET = 0x01,
+ BD71837_REG_I2C_DEV = 0x02,
+ BD71837_REG_PWRCTRL0 = 0x03,
+ BD71837_REG_PWRCTRL1 = 0x04,
+ BD71837_REG_BUCK1_CTRL = 0x05,
+ BD71837_REG_BUCK2_CTRL = 0x06,
+ BD71837_REG_BUCK3_CTRL = 0x07,
+ BD71837_REG_BUCK4_CTRL = 0x08,
+ BD71837_REG_BUCK5_CTRL = 0x09,
+ BD71837_REG_BUCK6_CTRL = 0x0A,
+ BD71837_REG_BUCK7_CTRL = 0x0B,
+ BD71837_REG_BUCK8_CTRL = 0x0C,
+ BD71837_REG_BUCK1_VOLT_RUN = 0x0D,
+ BD71837_REG_BUCK1_VOLT_IDLE = 0x0E,
+ BD71837_REG_BUCK1_VOLT_SUSP = 0x0F,
+ BD71837_REG_BUCK2_VOLT_RUN = 0x10,
+ BD71837_REG_BUCK2_VOLT_IDLE = 0x11,
+ BD71837_REG_BUCK3_VOLT_RUN = 0x12,
+ BD71837_REG_BUCK4_VOLT_RUN = 0x13,
+ BD71837_REG_BUCK5_VOLT = 0x14,
+ BD71837_REG_BUCK6_VOLT = 0x15,
+ BD71837_REG_BUCK7_VOLT = 0x16,
+ BD71837_REG_BUCK8_VOLT = 0x17,
+ BD71837_REG_LDO1_VOLT = 0x18,
+ BD71837_REG_LDO2_VOLT = 0x19,
+ BD71837_REG_LDO3_VOLT = 0x1A,
+ BD71837_REG_LDO4_VOLT = 0x1B,
+ BD71837_REG_LDO5_VOLT = 0x1C,
+ BD71837_REG_LDO6_VOLT = 0x1D,
+ BD71837_REG_LDO7_VOLT = 0x1E,
+ BD71837_REG_TRANS_COND0 = 0x1F,
+ BD71837_REG_TRANS_COND1 = 0x20,
+ BD71837_REG_VRFAULTEN = 0x21,
+ BD71837_REG_MVRFLTMASK0 = 0x22,
+ BD71837_REG_MVRFLTMASK1 = 0x23,
+ BD71837_REG_MVRFLTMASK2 = 0x24,
+ BD71837_REG_RCVCFG = 0x25,
+ BD71837_REG_RCVNUM = 0x26,
+ BD71837_REG_PWRONCONFIG0 = 0x27,
+ BD71837_REG_PWRONCONFIG1 = 0x28,
+ BD71837_REG_RESETSRC = 0x29,
+ BD71837_REG_MIRQ = 0x2A,
+ BD71837_REG_IRQ = 0x2B,
+ BD71837_REG_IN_MON = 0x2C,
+ BD71837_REG_POW_STATE = 0x2D,
+ BD71837_REG_OUT32K = 0x2E,
+ BD71837_REG_REGLOCK = 0x2F,
+ BD71837_REG_OTPVER = 0xFF,
+ BD71837_MAX_REGISTER = 0x100,
+};
+
+#define REGLOCK_PWRSEQ 0x1
+#define REGLOCK_VREG 0x10
+
+/* Generic BUCK control masks */
+#define BD71837_BUCK_SEL 0x02
+#define BD71837_BUCK_EN 0x01
+#define BD71837_BUCK_RUN_ON 0x04
+
+/* Generic LDO masks */
+#define BD71837_LDO_SEL 0x80
+#define BD71837_LDO_EN 0x40
+
+/* BD71837 BUCK ramp rate CTRL reg bits */
+#define BUCK_RAMPRATE_MASK 0xC0
+#define BUCK_RAMPRATE_10P00MV 0x0
+#define BUCK_RAMPRATE_5P00MV 0x1
+#define BUCK_RAMPRATE_2P50MV 0x2
+#define BUCK_RAMPRATE_1P25MV 0x3
+
+/* BD71837_REG_BUCK1_VOLT_RUN bits */
+#define BUCK1_RUN_MASK 0x3F
+#define BUCK1_RUN_DEFAULT 0x14
+
+/* BD71837_REG_BUCK1_VOLT_SUSP bits */
+#define BUCK1_SUSP_MASK 0x3F
+#define BUCK1_SUSP_DEFAULT 0x14
+
+/* BD71837_REG_BUCK1_VOLT_IDLE bits */
+#define BUCK1_IDLE_MASK 0x3F
+#define BUCK1_IDLE_DEFAULT 0x14
+
+/* BD71837_REG_BUCK2_VOLT_RUN bits */
+#define BUCK2_RUN_MASK 0x3F
+#define BUCK2_RUN_DEFAULT 0x1E
+
+/* BD71837_REG_BUCK2_VOLT_IDLE bits */
+#define BUCK2_IDLE_MASK 0x3F
+#define BUCK2_IDLE_DEFAULT 0x14
+
+/* BD71837_REG_BUCK3_VOLT_RUN bits */
+#define BUCK3_RUN_MASK 0x3F
+#define BUCK3_RUN_DEFAULT 0x1E
+
+/* BD71837_REG_BUCK4_VOLT_RUN bits */
+#define BUCK4_RUN_MASK 0x3F
+#define BUCK4_RUN_DEFAULT 0x1E
+
+/* BD71837_REG_BUCK5_VOLT bits */
+#define BUCK5_MASK 0x07
+#define BUCK5_DEFAULT 0x02
+
+/* BD71837_REG_BUCK6_VOLT bits */
+#define BUCK6_MASK 0x03
+#define BUCK6_DEFAULT 0x03
+
+/* BD71837_REG_BUCK7_VOLT bits */
+#define BUCK7_MASK 0x07
+#define BUCK7_DEFAULT 0x03
+
+/* BD71837_REG_BUCK8_VOLT bits */
+#define BUCK8_MASK 0x3F
+#define BUCK8_DEFAULT 0x1E
+
+/* BD71837_REG_IRQ bits */
+#define IRQ_SWRST 0x40
+#define IRQ_PWRON_S 0x20
+#define IRQ_PWRON_L 0x10
+#define IRQ_PWRON 0x08
+#define IRQ_WDOG 0x04
+#define IRQ_ON_REQ 0x02
+#define IRQ_STBY_REQ 0x01
+
+/* BD71837_REG_OUT32K bits */
+#define BD71837_OUT32K_EN 0x01
+
+/* BD71837 gated clock rate */
+#define BD71837_CLK_RATE 32768
+
+/* ROHM BD71837 irqs */
+enum {
+ BD71837_INT_STBY_REQ,
+ BD71837_INT_ON_REQ,
+ BD71837_INT_WDOG,
+ BD71837_INT_PWRBTN,
+ BD71837_INT_PWRBTN_L,
+ BD71837_INT_PWRBTN_S,
+ BD71837_INT_SWRST
+};
+
+/* ROHM BD71837 interrupt masks */
+#define BD71837_INT_SWRST_MASK 0x40
+#define BD71837_INT_PWRBTN_S_MASK 0x20
+#define BD71837_INT_PWRBTN_L_MASK 0x10
+#define BD71837_INT_PWRBTN_MASK 0x8
+#define BD71837_INT_WDOG_MASK 0x4
+#define BD71837_INT_ON_REQ_MASK 0x2
+#define BD71837_INT_STBY_REQ_MASK 0x1
+
+/* BD71837_REG_LDO1_VOLT bits */
+#define LDO1_MASK 0x03
+
+/* BD71837_REG_LDO1_VOLT bits */
+#define LDO2_MASK 0x20
+
+/* BD71837_REG_LDO3_VOLT bits */
+#define LDO3_MASK 0x0F
+
+/* BD71837_REG_LDO4_VOLT bits */
+#define LDO4_MASK 0x0F
+
+/* BD71837_REG_LDO5_VOLT bits */
+#define LDO5_MASK 0x0F
+
+/* BD71837_REG_LDO6_VOLT bits */
+#define LDO6_MASK 0x0F
+
+/* BD71837_REG_LDO7_VOLT bits */
+#define LDO7_MASK 0x0F
+
+/* Register write induced reset settings */
+
+/*
+ * Even though the bit zero is not SWRESET type we still want to write zero
+ * to it when changing type. Bit zero is 'SWRESET' trigger bit and if we
+ * write 1 to it we will trigger the action. So always write 0 to it when
+ * changning SWRESET action - no matter what we read from it.
+ */
+#define BD71837_SWRESET_TYPE_MASK 7
+#define BD71837_SWRESET_TYPE_DISABLED 0
+#define BD71837_SWRESET_TYPE_COLD 4
+#define BD71837_SWRESET_TYPE_WARM 6
+
+#define BD71837_SWRESET_RESET_MASK 1
+#define BD71837_SWRESET_RESET 1
+
+/* Poweroff state transition conditions */
+
+#define BD718XX_ON_REQ_POWEROFF_MASK 1
+#define BD718XX_SWRESET_POWEROFF_MASK 2
+#define BD718XX_WDOG_POWEROFF_MASK 4
+#define BD718XX_KEY_L_POWEROFF_MASK 8
+
+#define BD718XX_POWOFF_TO_SNVS 0
+#define BD718XX_POWOFF_TO_RDY 0xF
+
+#define BD718XX_POWOFF_TIME_MASK 0xF0
+enum {
+ BD718XX_POWOFF_TIME_5MS = 0,
+ BD718XX_POWOFF_TIME_10MS,
+ BD718XX_POWOFF_TIME_15MS,
+ BD718XX_POWOFF_TIME_20MS,
+ BD718XX_POWOFF_TIME_25MS,
+ BD718XX_POWOFF_TIME_30MS,
+ BD718XX_POWOFF_TIME_35MS,
+ BD718XX_POWOFF_TIME_40MS,
+ BD718XX_POWOFF_TIME_45MS,
+ BD718XX_POWOFF_TIME_50MS,
+ BD718XX_POWOFF_TIME_75MS,
+ BD718XX_POWOFF_TIME_100MS,
+ BD718XX_POWOFF_TIME_250MS,
+ BD718XX_POWOFF_TIME_500MS,
+ BD718XX_POWOFF_TIME_750MS,
+ BD718XX_POWOFF_TIME_1500MS
+};
+
+/* Poweron sequence state transition conditions */
+#define BD718XX_RDY_TO_SNVS_MASK 0xF
+#define BD718XX_SNVS_TO_RUN_MASK 0xF0
+
+#define BD718XX_PWR_TRIG_KEY_L 1
+#define BD718XX_PWR_TRIG_KEY_S 2
+#define BD718XX_PWR_TRIG_PMIC_ON 4
+#define BD718XX_PWR_TRIG_VSYS_UVLO 8
+#define BD718XX_RDY_TO_SNVS_SIFT 0
+#define BD718XX_SNVS_TO_RUN_SIFT 4
+
+#define BD718XX_PWRBTN_PRESS_DURATION_MASK 0xF
+
+/* Timeout value for detecting short press */
+enum {
+ BD718XX_PWRBTN_SHORT_PRESS_10MS = 0,
+ BD718XX_PWRBTN_SHORT_PRESS_500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_1000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_1500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_2000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_2500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_3000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_3500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_4000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_4500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_5000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_5500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_6000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_6500MS,
+ BD718XX_PWRBTN_SHORT_PRESS_7000MS,
+ BD718XX_PWRBTN_SHORT_PRESS_7500MS
+};
+
+/* Timeout value for detecting LONG press */
+enum {
+ BD718XX_PWRBTN_LONG_PRESS_10MS = 0,
+ BD718XX_PWRBTN_LONG_PRESS_1S,
+ BD718XX_PWRBTN_LONG_PRESS_2S,
+ BD718XX_PWRBTN_LONG_PRESS_3S,
+ BD718XX_PWRBTN_LONG_PRESS_4S,
+ BD718XX_PWRBTN_LONG_PRESS_5S,
+ BD718XX_PWRBTN_LONG_PRESS_6S,
+ BD718XX_PWRBTN_LONG_PRESS_7S,
+ BD718XX_PWRBTN_LONG_PRESS_8S,
+ BD718XX_PWRBTN_LONG_PRESS_9S,
+ BD718XX_PWRBTN_LONG_PRESS_10S,
+ BD718XX_PWRBTN_LONG_PRESS_11S,
+ BD718XX_PWRBTN_LONG_PRESS_12S,
+ BD718XX_PWRBTN_LONG_PRESS_13S,
+ BD718XX_PWRBTN_LONG_PRESS_14S,
+ BD718XX_PWRBTN_LONG_PRESS_15S
+};
+
+struct bd71837_pmic;
+struct bd71837_clk;
+
+struct bd71837 {
+ struct device *dev;
+ struct regmap *regmap;
+ unsigned long int id;
+
+ int chip_irq;
+ struct regmap_irq_chip_data *irq_data;
+
+ struct bd71837_pmic *pmic;
+ struct bd71837_clk *clk;
+};
+
+#endif /* __LINUX_MFD_BD71837_H__ */