Merge branch 'remotes/lorenzo/pci/meson'

  - Fix meson PERST# GPIO polarity problem (Remi Pommarel)

  - Add DT bindings for Amlogic Meson G12A (Neil Armstrong)

  - Fix meson clock names to match DT bindings (Neil Armstrong)

  - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil
    Armstrong)

  - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo
    PHY (Neil Armstrong)

  - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)

  - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil
    Armstrong)

* remotes/lorenzo/pci/meson:
  arm64: dts: khadas-vim3: add commented support for PCIe
  arm64: dts: meson-g12a: Add PCIe node
  phy: meson-g12a-usb3-pcie: Add support for PCIe mode
  PCI: amlogic: meson: Add support for G12A
  PCI: amlogic: Fix probed clock names
  dt-bindings: pci: amlogic, meson-pcie: Add G12A bindings
  PCI: amlogic: Fix reset assertion via gpio descriptor

9 files changed, 294 insertions, 40 deletions

diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
index efa2c8b9b85a..84fdc422792e 100644
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
@@ -9,13 +9,16 @@ Additional properties are described here:
 
 Required properties:
 - compatible:
-	should contain "amlogic,axg-pcie" to identify the core.
+	should contain :
+	- "amlogic,axg-pcie" for AXG SoC Family
+	- "amlogic,g12a-pcie" for G12A SoC Family
+	to identify the core.
 - reg:
 	should contain the configuration address space.
 - reg-names: Must be
 	- "elbi"	External local bus interface registers
 	- "cfg"		Meson specific registers
-	- "phy"		Meson PCIE PHY registers
+	- "phy"		Meson PCIE PHY registers for AXG SoC Family
 	- "config"	PCIe configuration space
 - reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
 - clocks: Must contain an entry for each entry in clock-names.
@@ -23,12 +26,13 @@ Required properties:
 	- "pclk"       PCIe GEN 100M PLL clock
 	- "port"       PCIe_x(A or B) RC clock gate
 	- "general"    PCIe Phy clock
-	- "mipi"       PCIe_x(A or B) 100M ref clock gate
+	- "mipi"       PCIe_x(A or B) 100M ref clock gate for AXG SoC Family
 - resets: phandle to the reset lines.
 - reset-names: must contain "phy" "port" and "apb"
-       - "phy"         Share PHY reset
+       - "phy"         Share PHY reset for AXG SoC Family
        - "port"        Port A or B reset
        - "apb"         Share APB reset
+- phys: should contain a phandle to the shared phy for G12A SoC Family
 - device_type:
 	should be "pci". As specified in designware-pcie.txt
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 3f39e020f74e..7ab71172cd3c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -95,6 +95,39 @@
 		#size-cells = <2>;
 		ranges;
 
+		pcie: pcie@fc000000 {
+			compatible = "amlogic,g12a-pcie", "snps,dw-pcie";
+			reg = <0x0 0xfc000000 0x0 0x400000
+			       0x0 0xff648000 0x0 0x2000
+			       0x0 0xfc400000 0x0 0x200000>;
+			reg-names = "elbi", "cfg", "config";
+			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			bus-range = <0x0 0xff>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000
+				  0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>;
+
+			clocks = <&clkc CLKID_PCIE_PHY
+				  &clkc CLKID_PCIE_COMB
+				  &clkc CLKID_PCIE_PLL>;
+			clock-names = "general",
+				      "pclk",
+				      "port";
+			resets = <&reset RESET_PCIE_CTRL_A>,
+				 <&reset RESET_PCIE_APB>;
+			reset-names = "port",
+				      "apb";
+			num-lanes = <1>;
+			phys = <&usb3_pcie_phy PHY_TYPE_PCIE>;
+			phy-names = "pcie";
+			status = "disabled";
+		};
+
 		ethmac: ethernet@ff3f0000 {
 			compatible = "amlogic,meson-axg-dwmac",
 				     "snps,dwmac-3.70a",
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
index 3a6a1e0c1e32..124a80901084 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts
@@ -14,3 +14,28 @@
 / {
 	compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b";
 };
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
index b73deb282120..bba98f982ad6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts
@@ -14,3 +14,28 @@
 / {
 	compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b";
 };
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 8647da7d6609..eac5720dc15f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -246,6 +246,10 @@
 	linux,rc-map-name = "rc-khadas";
 };
 
+&pcie {
+	reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>;
+};
+
 &pwm_ef {
         status = "okay";
         pinctrl-0 = <&pwm_e_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 5233bd7cacfb..dbbf29a0dbf6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -68,3 +68,28 @@
 	clock-names = "clkin1";
 	status = "okay";
 };
+
+/*
+ * The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
+ * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
+ * an USB3.0 Type A connector and a M.2 Key M slot.
+ * The PHY driving these differential lines is shared between
+ * the USB3.0 controller and the PCIe Controller, thus only
+ * a single controller can use it.
+ * If the MCU is configured to mux the PCIe/USB3.0 differential lines
+ * to the M.2 Key M slot, uncomment the following block to disable
+ * USB3.0 from the USB Complex and enable the PCIe controller.
+ * The End User is not expected to uncomment the following except for
+ * testing purposes, but instead rely on the firmware/bootloader to
+ * update these nodes accordingly if PCIe mode is selected by the MCU.
+ */
+/*
+&pcie {
+	status = "okay";
+};
+
+&usb {
+	phys = <&usb2_phy0>, <&usb2_phy1>;
+	phy-names = "usb2-phy0", "usb2-phy1";
+};
+ */
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 521573f3a5ba..256ea0349ffc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -134,6 +134,10 @@
 	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
 };
 
+&pcie {
+	power-domains = <&pwrc PWRC_SM1_PCIE_ID>;
+};
+
 &pwrc {
 	compatible = "amlogic,meson-sm1-pwrc";
 };
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index e35e9eaa50ee..3772b02a5c55 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -16,6 +16,7 @@
 #include <linux/reset.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/phy/phy.h>
 
 #include "pcie-designware.h"
 
@@ -96,12 +97,18 @@ struct meson_pcie_rc_reset {
 	struct reset_control *apb;
 };
 
+struct meson_pcie_param {
+	bool has_shared_phy;
+};
+
 struct meson_pcie {
 	struct dw_pcie pci;
 	struct meson_pcie_mem_res mem_res;
 	struct meson_pcie_clk_res clk_res;
 	struct meson_pcie_rc_reset mrst;
 	struct gpio_desc *reset_gpio;
+	struct phy *phy;
+	const struct meson_pcie_param *param;
 };
 
 static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
@@ -123,10 +130,12 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
 
-	mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
-	if (IS_ERR(mrst->phy))
-		return PTR_ERR(mrst->phy);
-	reset_control_deassert(mrst->phy);
+	if (!mp->param->has_shared_phy) {
+		mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
+		if (IS_ERR(mrst->phy))
+			return PTR_ERR(mrst->phy);
+		reset_control_deassert(mrst->phy);
+	}
 
 	mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
 	if (IS_ERR(mrst->port))
@@ -180,27 +189,52 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
 	if (IS_ERR(mp->mem_res.cfg_base))
 		return PTR_ERR(mp->mem_res.cfg_base);
 
-	/* Meson SoC has two PCI controllers use same phy register*/
-	mp->mem_res.phy_base = meson_pcie_get_mem_shared(pdev, mp, "phy");
-	if (IS_ERR(mp->mem_res.phy_base))
-		return PTR_ERR(mp->mem_res.phy_base);
+	/* Meson AXG SoC has two PCI controllers use same phy register */
+	if (!mp->param->has_shared_phy) {
+		mp->mem_res.phy_base =
+			meson_pcie_get_mem_shared(pdev, mp, "phy");
+		if (IS_ERR(mp->mem_res.phy_base))
+			return PTR_ERR(mp->mem_res.phy_base);
+	}
 
 	return 0;
 }
 
-static void meson_pcie_power_on(struct meson_pcie *mp)
+static int meson_pcie_power_on(struct meson_pcie *mp)
 {
-	writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+	int ret = 0;
+
+	if (mp->param->has_shared_phy) {
+		ret = phy_init(mp->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(mp->phy);
+		if (ret) {
+			phy_exit(mp->phy);
+			return ret;
+		}
+	} else
+		writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
+
+	return 0;
 }
 
-static void meson_pcie_reset(struct meson_pcie *mp)
+static int meson_pcie_reset(struct meson_pcie *mp)
 {
 	struct meson_pcie_rc_reset *mrst = &mp->mrst;
-
-	reset_control_assert(mrst->phy);
-	udelay(PCIE_RESET_DELAY);
-	reset_control_deassert(mrst->phy);
-	udelay(PCIE_RESET_DELAY);
+	int ret = 0;
+
+	if (mp->param->has_shared_phy) {
+		ret = phy_reset(mp->phy);
+		if (ret)
+			return ret;
+	} else {
+		reset_control_assert(mrst->phy);
+		udelay(PCIE_RESET_DELAY);
+		reset_control_deassert(mrst->phy);
+		udelay(PCIE_RESET_DELAY);
+	}
 
 	reset_control_assert(mrst->port);
 	reset_control_assert(mrst->apb);
@@ -208,6 +242,8 @@ static void meson_pcie_reset(struct meson_pcie *mp)
 	reset_control_deassert(mrst->port);
 	reset_control_deassert(mrst->apb);
 	udelay(PCIE_RESET_DELAY);
+
+	return 0;
 }
 
 static inline struct clk *meson_pcie_probe_clock(struct device *dev,
@@ -250,15 +286,17 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
 	if (IS_ERR(res->port_clk))
 		return PTR_ERR(res->port_clk);
 
-	res->mipi_gate = meson_pcie_probe_clock(dev, "pcie_mipi_en", 0);
-	if (IS_ERR(res->mipi_gate))
-		return PTR_ERR(res->mipi_gate);
+	if (!mp->param->has_shared_phy) {
+		res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
+		if (IS_ERR(res->mipi_gate))
+			return PTR_ERR(res->mipi_gate);
+	}
 
-	res->general_clk = meson_pcie_probe_clock(dev, "pcie_general", 0);
+	res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
 	if (IS_ERR(res->general_clk))
 		return PTR_ERR(res->general_clk);
 
-	res->clk = meson_pcie_probe_clock(dev, "pcie", 0);
+	res->clk = meson_pcie_probe_clock(dev, "pclk", 0);
 	if (IS_ERR(res->clk))
 		return PTR_ERR(res->clk);
 
@@ -287,9 +325,9 @@ static inline void meson_cfg_writel(struct meson_pcie *mp, u32 val, u32 reg)
 
 static void meson_pcie_assert_reset(struct meson_pcie *mp)
 {
-	gpiod_set_value_cansleep(mp->reset_gpio, 0);
-	udelay(500);
 	gpiod_set_value_cansleep(mp->reset_gpio, 1);
+	udelay(500);
+	gpiod_set_value_cansleep(mp->reset_gpio, 0);
 }
 
 static void meson_pcie_init_dw(struct meson_pcie *mp)
@@ -524,6 +562,7 @@ static const struct dw_pcie_ops dw_pcie_ops = {
 
 static int meson_pcie_probe(struct platform_device *pdev)
 {
+	const struct meson_pcie_param *match_data;
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct meson_pcie *mp;
@@ -537,6 +576,19 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
 
+	match_data = of_device_get_match_data(dev);
+	if (!match_data) {
+		dev_err(dev, "failed to get match data\n");
+		return -ENODEV;
+	}
+	mp->param = match_data;
+
+	if (mp->param->has_shared_phy) {
+		mp->phy = devm_phy_get(dev, "pcie");
+		if (IS_ERR(mp->phy))
+			return PTR_ERR(mp->phy);
+	}
+
 	mp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(mp->reset_gpio)) {
 		dev_err(dev, "get reset gpio failed\n");
@@ -555,13 +607,22 @@ static int meson_pcie_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	meson_pcie_power_on(mp);
-	meson_pcie_reset(mp);
+	ret = meson_pcie_power_on(mp);
+	if (ret) {
+		dev_err(dev, "phy power on failed, %d\n", ret);
+		return ret;
+	}
+
+	ret = meson_pcie_reset(mp);
+	if (ret) {
+		dev_err(dev, "reset failed, %d\n", ret);
+		goto err_phy;
+	}
 
 	ret = meson_pcie_probe_clocks(mp);
 	if (ret) {
 		dev_err(dev, "init clock resources failed, %d\n", ret);
-		return ret;
+		goto err_phy;
 	}
 
 	platform_set_drvdata(pdev, mp);
@@ -569,15 +630,36 @@ static int meson_pcie_probe(struct platform_device *pdev)
 	ret = meson_add_pcie_port(mp, pdev);
 	if (ret < 0) {
 		dev_err(dev, "Add PCIe port failed, %d\n", ret);
-		return ret;
+		goto err_phy;
 	}
 
 	return 0;
+
+err_phy:
+	if (mp->param->has_shared_phy) {
+		phy_power_off(mp->phy);
+		phy_exit(mp->phy);
+	}
+
+	return ret;
 }
 
+static struct meson_pcie_param meson_pcie_axg_param = {
+	.has_shared_phy = false,
+};
+
+static struct meson_pcie_param meson_pcie_g12a_param = {
+	.has_shared_phy = true,
+};
+
 static const struct of_device_id meson_pcie_of_match[] = {
 	{
 		.compatible = "amlogic,axg-pcie",
+		.data = &meson_pcie_axg_param,
+	},
+	{
+		.compatible = "amlogic,g12a-pcie",
+		.data = &meson_pcie_g12a_param,
 	},
 	{},
 };
diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
index ac322d643c7a..08e322789e59 100644
--- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
+++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c
@@ -50,6 +50,8 @@
 	#define PHY_R5_PHY_CR_ACK				BIT(16)
 	#define PHY_R5_PHY_BS_OUT				BIT(17)
 
+#define PCIE_RESET_DELAY					500
+
 struct phy_g12a_usb3_pcie_priv {
 	struct regmap		*regmap;
 	struct regmap		*regmap_cr;
@@ -196,6 +198,10 @@ static int phy_g12a_usb3_init(struct phy *phy)
 	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
 	int data, ret;
 
+	ret = reset_control_reset(priv->reset);
+	if (ret)
+		return ret;
+
 	/* Switch PHY to USB3 */
 	/* TODO figure out how to handle when PCIe was set in the bootloader */
 	regmap_update_bits(priv->regmap, PHY_R0,
@@ -272,24 +278,64 @@ static int phy_g12a_usb3_init(struct phy *phy)
 	return 0;
 }
 
-static int phy_g12a_usb3_pcie_init(struct phy *phy)
+static int phy_g12a_usb3_pcie_power_on(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_power_off(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	regmap_update_bits(priv->regmap, PHY_R0,
+			   PHY_R0_PCIE_POWER_STATE,
+			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1d));
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_reset(struct phy *phy)
 {
 	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
 	int ret;
 
-	ret = reset_control_reset(priv->reset);
+	if (priv->mode == PHY_TYPE_USB3)
+		return 0;
+
+	ret = reset_control_assert(priv->reset);
 	if (ret)
 		return ret;
 
+	udelay(PCIE_RESET_DELAY);
+
+	ret = reset_control_deassert(priv->reset);
+	if (ret)
+		return ret;
+
+	udelay(PCIE_RESET_DELAY);
+
+	return 0;
+}
+
+static int phy_g12a_usb3_pcie_init(struct phy *phy)
+{
+	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
+
 	if (priv->mode == PHY_TYPE_USB3)
 		return phy_g12a_usb3_init(phy);
 
-	/* Power UP PCIE */
-	/* TODO figure out when the bootloader has set USB3 mode before */
-	regmap_update_bits(priv->regmap, PHY_R0,
-			   PHY_R0_PCIE_POWER_STATE,
-			   FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
-
 	return 0;
 }
 
@@ -297,7 +343,10 @@ static int phy_g12a_usb3_pcie_exit(struct phy *phy)
 {
 	struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
 
-	return reset_control_reset(priv->reset);
+	if (priv->mode == PHY_TYPE_USB3)
+		return reset_control_reset(priv->reset);
+
+	return 0;
 }
 
 static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
@@ -326,6 +375,9 @@ static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev,
 static const struct phy_ops phy_g12a_usb3_pcie_ops = {
 	.init		= phy_g12a_usb3_pcie_init,
 	.exit		= phy_g12a_usb3_pcie_exit,
+	.power_on	= phy_g12a_usb3_pcie_power_on,
+	.power_off	= phy_g12a_usb3_pcie_power_off,
+	.reset		= phy_g12a_usb3_pcie_reset,
 	.owner		= THIS_MODULE,
 };