summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMark Brown <broonie@opensource.wolfsonmicro.com>2010-03-15 21:14:34 +0300
committerMark Brown <broonie@opensource.wolfsonmicro.com>2010-03-16 18:56:54 +0300
commit37f88e8407f75fc6ced5cefb633c314556de3ad1 (patch)
tree95b4bd8d967f4c229becaad4b5dc503be6f46448
parent73b34ead7429789f35eea147a3e185abd61c7d94 (diff)
downloadlinux-37f88e8407f75fc6ced5cefb633c314556de3ad1.tar.xz
ASoC: Initial WM8903 microphone bias and short detection
Provide support for WM8903 microphone presence and short detection using the GPIOs to route out a logic signal suitable for handling using snd_soc_jack_add_gpios() on the processor GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-rw-r--r--include/sound/wm8903.h29
-rw-r--r--sound/soc/codecs/wm8903.c24
-rw-r--r--sound/soc/codecs/wm8903.h22
3 files changed, 45 insertions, 30 deletions
diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h
index 00458589fe85..22b66a76febd 100644
--- a/include/sound/wm8903.h
+++ b/include/sound/wm8903.h
@@ -15,6 +15,28 @@
#define WM8903_GPIO_NO_CONFIG 0x8000
/*
+ * R6 (0x06) - Mic Bias Control 0
+ */
+#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */
+#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */
+#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
+#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
+#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
+#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
+#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */
+#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */
+#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */
+#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */
+#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */
+#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */
+
+/*
* R116 (0x74) - GPIO Control 1
*/
#define WM8903_GP1_FN_MASK 0x1F00 /* GP1_FN - [12:8] */
@@ -210,6 +232,13 @@
#define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */
struct wm8903_platform_data {
+ /* Default register value for R6 (Mic bias), used to configure
+ * microphone detection. In conjunction with gpio_cfg this
+ * can be used to route the microphone status signals out onto
+ * the GPIOs for use with snd_soc_jack_add_gpios().
+ */
+ u16 micdet_cfg;
+
u32 gpio_cfg[5]; /* Default register values for GPIO pin mux */
};
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index 36952d77c271..467e6c335c5a 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -11,7 +11,6 @@
*
* TODO:
* - TDM mode configuration.
- * - Mic detect.
* - Digital microphone support.
* - Interrupt support (mic detect and sequencer).
*/
@@ -246,10 +245,10 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
BUG_ON(start > 48);
- /* Enable the sequencer */
+ /* Enable the sequencer if it's not already on */
reg[0] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_0);
- reg[0] |= WM8903_WSEQ_ENA;
- snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
+ reg[0] | WM8903_WSEQ_ENA);
dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
@@ -268,9 +267,8 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
dev_dbg(&i2c->dev, "Sequence complete\n");
- /* Disable the sequencer again */
- snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
- reg[0] & ~WM8903_WSEQ_ENA);
+ /* Disable the sequencer again if we enabled it */
+ snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
return 0;
}
@@ -1578,7 +1576,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
wm8903_reset(codec);
- /* Set up GPIOs */
+ /* Set up GPIOs and microphone detection */
if (pdata) {
for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
if (!pdata->gpio_cfg[i])
@@ -1587,6 +1585,16 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
snd_soc_write(codec, WM8903_GPIO_CONTROL_1 + i,
pdata->gpio_cfg[i] & 0xffff);
}
+
+ snd_soc_write(codec, WM8903_MIC_BIAS_CONTROL_0,
+ pdata->micdet_cfg);
+
+ /* Microphone detection needs the WSEQ clock */
+ if (pdata->micdet_cfg)
+ snd_soc_update_bits(codec, WM8903_WRITE_SEQUENCER_0,
+ WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
+
+ wm8903->mic_delay = pdata->micdet_delay;
}
/* power on device */
diff --git a/sound/soc/codecs/wm8903.h b/sound/soc/codecs/wm8903.h
index 551736cf2195..8f19a2413785 100644
--- a/sound/soc/codecs/wm8903.h
+++ b/sound/soc/codecs/wm8903.h
@@ -173,28 +173,6 @@ extern struct snd_soc_codec_device soc_codec_dev_wm8903;
#define WM8903_VMID_RES_5K 4
/*
- * R6 (0x06) - Mic Bias Control 0
- */
-#define WM8903_MICDET_HYST_ENA 0x0080 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_MASK 0x0080 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_SHIFT 7 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_HYST_ENA_WIDTH 1 /* MICDET_HYST_ENA */
-#define WM8903_MICDET_THR_MASK 0x0070 /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_SHIFT 4 /* MICDET_THR - [6:4] */
-#define WM8903_MICDET_THR_WIDTH 3 /* MICDET_THR - [6:4] */
-#define WM8903_MICSHORT_THR_MASK 0x000C /* MICSHORT_THR - [3:2] */
-#define WM8903_MICSHORT_THR_SHIFT 2 /* MICSHORT_THR - [3:2] */
-#define WM8903_MICSHORT_THR_WIDTH 2 /* MICSHORT_THR - [3:2] */
-#define WM8903_MICDET_ENA 0x0002 /* MICDET_ENA */
-#define WM8903_MICDET_ENA_MASK 0x0002 /* MICDET_ENA */
-#define WM8903_MICDET_ENA_SHIFT 1 /* MICDET_ENA */
-#define WM8903_MICDET_ENA_WIDTH 1 /* MICDET_ENA */
-#define WM8903_MICBIAS_ENA 0x0001 /* MICBIAS_ENA */
-#define WM8903_MICBIAS_ENA_MASK 0x0001 /* MICBIAS_ENA */
-#define WM8903_MICBIAS_ENA_SHIFT 0 /* MICBIAS_ENA */
-#define WM8903_MICBIAS_ENA_WIDTH 1 /* MICBIAS_ENA */
-
-/*
* R8 (0x08) - Analogue DAC 0
*/
#define WM8903_DACBIAS_SEL_MASK 0x0018 /* DACBIAS_SEL - [4:3] */