summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPaul Bolle <pebolle@tiscali.nl>2011-11-23 13:39:10 +0400
committerMark Brown <broonie@opensource.wolfsonmicro.com>2011-11-23 14:28:38 +0400
commit4ca8af579c9748376db537575f7a811c179fe50a (patch)
tree172b5cb7c00b6bb5f8c95f0878a9748d9da335ba
parent380c88303812951f6c838241366a66a03fb5c897 (diff)
downloadlinux-4ca8af579c9748376db537575f7a811c179fe50a.tar.xz
ASoC: drop support for PlayPaq with WM8510
SoC Audio support for PlayPaq with WM8510 got added in commit 9aaca9683b ("[ALSA] Revised AT32 ASoC Patch"). That support depends on BOARD_PLAYPAQ. That Kconfig symbol didn't exist when that support got added in v2.6.27. It still doesn't. It has never been possible to even build this driver. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-rw-r--r--sound/soc/atmel/Kconfig21
-rw-r--r--sound/soc/atmel/Makefile4
-rw-r--r--sound/soc/atmel/playpaq_wm8510.c473
3 files changed, 1 insertions, 497 deletions
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index bee3c94f58b0..d1fcc816ce97 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -1,6 +1,6 @@
config SND_ATMEL_SOC
tristate "SoC Audio for the Atmel System-on-Chip"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91
help
Say Y or M if you want to add support for codecs attached to
the ATMEL SSC interface. You will also need
@@ -24,25 +24,6 @@ config SND_AT91_SOC_SAM9G20_WM8731
Say Y if you want to add support for SoC audio on WM8731-based
AT91sam9g20 evaluation board.
-config SND_AT32_SOC_PLAYPAQ
- tristate "SoC Audio support for PlayPaq with WM8510"
- depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
- select SND_ATMEL_SOC_SSC
- select SND_SOC_WM8510
- help
- Say Y or M here if you want to add support for SoC audio
- on the LRS PlayPaq.
-
-config SND_AT32_SOC_PLAYPAQ_SLAVE
- bool "Run CODEC on PlayPaq in slave mode"
- depends on SND_AT32_SOC_PLAYPAQ
- default n
- help
- Say Y if you want to run with the AT32 SSC generating the BCLK
- and FRAME signals on the PlayPaq. Unless you want to play
- with the AT32 as the SSC master, you probably want to say N here,
- as this will give you better sound quality.
-
config SND_AT91_SOC_AFEB9260
tristate "SoC Audio support for AFEB9260 board"
depends on ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index e7ea56bd5f82..a5c0bf19da78 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -8,9 +8,5 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
# AT91 Machine Support
snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
-# AT32 Machine Support
-snd-soc-playpaq-objs := playpaq_wm8510.o
-
obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
-obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c
deleted file mode 100644
index 73ae99ad4578..000000000000
--- a/sound/soc/atmel/playpaq_wm8510.c
+++ /dev/null
@@ -1,473 +0,0 @@
-/* sound/soc/at32/playpaq_wm8510.c
- * ASoC machine driver for PlayPaq using WM8510 codec
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c
- *
- * NOTE: If you don't have the AT32 enhanced portmux configured (which
- * isn't currently in the mainline or Atmel patched kernel), you will
- * need to set the MCLK pin (PA30) to peripheral A in your board initialization
- * code. Something like:
- * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0);
- *
- */
-
-/* #define DEBUG */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/at32ap700x.h>
-#include <mach/portmux.h>
-
-#include "../codecs/wm8510.h"
-#include "atmel-pcm.h"
-#include "atmel_ssc_dai.h"
-
-
-/*-------------------------------------------------------------------------*\
- * constants
-\*-------------------------------------------------------------------------*/
-#define MCLK_PIN GPIO_PIN_PA(30)
-#define MCLK_PERIPH GPIO_PERIPH_A
-
-
-/*-------------------------------------------------------------------------*\
- * data types
-\*-------------------------------------------------------------------------*/
-/* SSC clocking data */
-struct ssc_clock_data {
- /* CMR div */
- unsigned int cmr_div;
-
- /* Frame period (as needed by xCMR.PERIOD) */
- unsigned int period;
-
- /* The SSC clock rate these settings where calculated for */
- unsigned long ssc_rate;
-};
-
-
-/*-------------------------------------------------------------------------*\
- * module data
-\*-------------------------------------------------------------------------*/
-static struct clk *_gclk0;
-static struct clk *_pll0;
-
-#define CODEC_CLK (_gclk0)
-
-
-/*-------------------------------------------------------------------------*\
- * Sound SOC operations
-\*-------------------------------------------------------------------------*/
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
-static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock(
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
- struct ssc_device *ssc = ssc_p->ssc;
- struct ssc_clock_data cd;
- unsigned int rate, width_bits, channels;
- unsigned int bitrate, ssc_div;
- unsigned actual_rate;
-
-
- /*
- * Figure out required bitrate
- */
- rate = params_rate(params);
- channels = params_channels(params);
- width_bits = snd_pcm_format_physical_width(params_format(params));
- bitrate = rate * width_bits * channels;
-
-
- /*
- * Figure out required SSC divider and period for required bitrate
- */
- cd.ssc_rate = clk_get_rate(ssc->clk);
- ssc_div = cd.ssc_rate / bitrate;
- cd.cmr_div = ssc_div / 2;
- if (ssc_div & 1) {
- /* round cmr_div up */
- cd.cmr_div++;
- }
- cd.period = width_bits - 1;
-
-
- /*
- * Find actual rate, compare to requested rate
- */
- actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1));
- pr_debug("playpaq_wm8510: Request rate = %u, actual rate = %u\n",
- rate, actual_rate);
-
-
- return cd;
-}
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
-
-static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- struct at32_ssc_info *ssc_p = snd_soc_dai_get_drvdata(cpu_dai);
- struct ssc_device *ssc = ssc_p->ssc;
- unsigned int pll_out = 0, bclk = 0, mclk_div = 0;
- int ret;
-
-
- /* Due to difficulties with getting the correct clocks from the AT32's
- * PLL0, we're going to let the CODEC be in charge of all the clocks
- */
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
-#else
- struct ssc_clock_data cd;
- const unsigned int fmt = (SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBS_CFS);
-#endif
-
- if (ssc == NULL) {
- pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n");
- return -EINVAL;
- }
-
-
- /*
- * Figure out PLL and BCLK dividers for WM8510
- */
- switch (params_rate(params)) {
- case 48000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_2;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 44100:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_2;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 22050:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_4;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 16000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_6;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 11025:
- pll_out = 22579200;
- mclk_div = WM8510_MCLKDIV_8;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- case 8000:
- pll_out = 24576000;
- mclk_div = WM8510_MCLKDIV_12;
- bclk = WM8510_BCLKDIV_8;
- break;
-
- default:
- pr_warning("playpaq_wm8510: Unsupported sample rate %d\n",
- params_rate(params));
- return -EINVAL;
- }
-
-
- /*
- * set CPU and CODEC DAI configuration
- */
- ret = snd_soc_dai_set_fmt(codec_dai, fmt);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CODEC DAI format (%d)\n",
- ret);
- return ret;
- }
- ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CPU DAI format (%d)\n",
- ret);
- return ret;
- }
-
-
- /*
- * Set CPU clock configuration
- */
-#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai);
- pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n",
- cd.cmr_div, cd.period);
- ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n",
- ret);
- return ret;
- }
- ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD,
- cd.period);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: "
- "Failed to set CPU transmit period (%d)\n",
- ret);
- return ret;
- }
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
- /*
- * Set CODEC clock configuration
- */
- pr_debug("playpaq_wm8510: "
- "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n",
- clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div);
-
-
-#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk);
- if (ret < 0) {
- pr_warning
- ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n",
- ret);
- return ret;
- }
-#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */
-
-
- ret = snd_soc_dai_set_pll(codec_dai, 0, 0,
- clk_get_rate(CODEC_CLK), pll_out);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n",
- ret);
- return ret;
- }
-
-
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div);
- if (ret < 0) {
- pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n",
- ret);
- return ret;
- }
-
-
- return 0;
-}
-
-
-
-static struct snd_soc_ops playpaq_wm8510_ops = {
- .hw_params = playpaq_wm8510_hw_params,
-};
-
-
-
-static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = {
- SND_SOC_DAPM_MIC("Int Mic", NULL),
- SND_SOC_DAPM_SPK("Ext Spk", NULL),
-};
-
-
-
-static const struct snd_soc_dapm_route intercon[] = {
- /* speaker connected to SPKOUT */
- {"Ext Spk", NULL, "SPKOUTP"},
- {"Ext Spk", NULL, "SPKOUTN"},
-
- {"Mic Bias", NULL, "Int Mic"},
- {"MICN", NULL, "Mic Bias"},
- {"MICP", NULL, "Mic Bias"},
-};
-
-
-
-static int playpaq_wm8510_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_codec *codec = rtd->codec;
- struct snd_soc_dapm_context *dapm = &codec->dapm;
- int i;
-
- /*
- * Add DAPM widgets
- */
- for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++)
- snd_soc_dapm_new_control(dapm, &playpaq_dapm_widgets[i]);
-
-
-
- /*
- * Setup audio path interconnects
- */
- snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
-
-
-
- /* always connected pins */
- snd_soc_dapm_enable_pin(dapm, "Int Mic");
- snd_soc_dapm_enable_pin(dapm, "Ext Spk");
-
-
-
- /* Make CSB show PLL rate */
- snd_soc_dai_set_clkdiv(rtd->codec_dai, WM8510_OPCLKDIV,
- WM8510_OPCLKDIV_1 | 4);
-
- return 0;
-}
-
-
-
-static struct snd_soc_dai_link playpaq_wm8510_dai = {
- .name = "WM8510",
- .stream_name = "WM8510 PCM",
- .cpu_dai_name= "atmel-ssc-dai.0",
- .platform_name = "atmel-pcm-audio",
- .codec_name = "wm8510-codec.0-0x1a",
- .codec_dai_name = "wm8510-hifi",
- .init = playpaq_wm8510_init,
- .ops = &playpaq_wm8510_ops,
-};
-
-
-
-static struct snd_soc_card snd_soc_playpaq = {
- .name = "LRS_PlayPaq_WM8510",
- .dai_link = &playpaq_wm8510_dai,
- .num_links = 1,
-};
-
-static struct platform_device *playpaq_snd_device;
-
-
-static int __init playpaq_asoc_init(void)
-{
- int ret = 0;
-
- /*
- * Configure MCLK for WM8510
- */
- _gclk0 = clk_get(NULL, "gclk0");
- if (IS_ERR(_gclk0)) {
- _gclk0 = NULL;
- ret = PTR_ERR(_gclk0);
- goto err_gclk0;
- }
- _pll0 = clk_get(NULL, "pll0");
- if (IS_ERR(_pll0)) {
- _pll0 = NULL;
- ret = PTR_ERR(_pll0);
- goto err_pll0;
- }
- ret = clk_set_parent(_gclk0, _pll0);
- if (ret) {
- pr_warning("snd-soc-playpaq: "
- "Failed to set PLL0 as parent for DAC clock\n");
- goto err_set_clk;
- }
- clk_set_rate(CODEC_CLK, 12000000);
- clk_enable(CODEC_CLK);
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
- at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0);
-#endif
-
-
- /*
- * Create and register platform device
- */
- playpaq_snd_device = platform_device_alloc("soc-audio", 0);
- if (playpaq_snd_device == NULL) {
- ret = -ENOMEM;
- goto err_device_alloc;
- }
-
- platform_set_drvdata(playpaq_snd_device, &snd_soc_playpaq);
-
- ret = platform_device_add(playpaq_snd_device);
- if (ret) {
- pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n",
- ret);
- goto err_device_add;
- }
-
- return 0;
-
-
-err_device_add:
- if (playpaq_snd_device != NULL) {
- platform_device_put(playpaq_snd_device);
- playpaq_snd_device = NULL;
- }
-err_device_alloc:
-err_set_clk:
- if (_pll0 != NULL) {
- clk_put(_pll0);
- _pll0 = NULL;
- }
-err_pll0:
- if (_gclk0 != NULL) {
- clk_put(_gclk0);
- _gclk0 = NULL;
- }
- return ret;
-}
-
-
-static void __exit playpaq_asoc_exit(void)
-{
- if (_gclk0 != NULL) {
- clk_put(_gclk0);
- _gclk0 = NULL;
- }
- if (_pll0 != NULL) {
- clk_put(_pll0);
- _pll0 = NULL;
- }
-
-#if defined CONFIG_AT32_ENHANCED_PORTMUX
- at32_free_pin(MCLK_PIN);
-#endif
-
- platform_device_unregister(playpaq_snd_device);
- playpaq_snd_device = NULL;
-}
-
-module_init(playpaq_asoc_init);
-module_exit(playpaq_asoc_exit);
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq");
-MODULE_LICENSE("GPL");