diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-09-06 00:44:48 +0300 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-09-06 00:44:48 +0300 |
commit | 53e99dcff61e1523ec1c3628b2d564ba15d32eb7 (patch) | |
tree | 2cc61390c6fb6862f586aa4d2b4d2faf2636f9ee | |
parent | 7e18e42e4b280c85b76967a9106a13ca61c16179 (diff) | |
parent | 12f09234bde51810b3f7412b2b5c84af4c07cfb1 (diff) | |
download | linux-53e99dcff61e1523ec1c3628b2d564ba15d32eb7.tar.xz |
Merge tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the expected fixes for the SoC tree. I have let the patches
pile up a little too long, so this is bigger than I would have liked.
- Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
TEE firmware
- Updates to the MAINTAINERS file for the PolarFire SoC
- Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
platforms
- A fix for a missing dependnecy in the NXP DPIO driver
- Broadcom BCA fixes to the newly added devicetree files
- Multiple fixes for Microchip AT91 based SoCs, dealing with
self-refresh timings and regulator settings in DT
- Several DT fixes for NXP i.MX platforms, dealing with incorrect
GPIO settings, extraneous nodes, and a wrong clock setting"
* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
soc: fsl: select FSL_GUTS driver for DPIO
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
ARM: ixp4xx: fix typos in comments
arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
tee: fix compiler warning in tee_shm_register()
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
...
36 files changed, 202 insertions, 123 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index d30f26e07cd3..f1390b8270b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17532,9 +17532,19 @@ M: Conor Dooley <conor.dooley@microchip.com> M: Daire McNamara <daire.mcnamara@microchip.com> L: linux-riscv@lists.infradead.org S: Supported +F: Documentation/devicetree/bindings/clock/microchip,mpfs.yaml +F: Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml +F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml +F: Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +F: Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml +F: Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml +F: Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +F: Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml F: arch/riscv/boot/dts/microchip/ F: drivers/char/hw_random/mpfs-rng.c F: drivers/clk/microchip/clk-mpfs.c +F: drivers/i2c/busses/i2c-microchip-core.c F: drivers/mailbox/mailbox-mpfs.c F: drivers/pci/controller/pcie-microchip-host.c F: drivers/rtc/rtc-mpfs.c diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi index 2dfb32bf9d48..fbb2258b451f 100644 --- a/arch/arm/boot/dts/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm-realview-eb.dtsi @@ -399,7 +399,7 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; wdog: watchdog@10010000 { diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index 06b8723b09eb..efed325af88d 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -410,7 +410,7 @@ interrupt-parent = <&intc_dc1176>; interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; pb1176_serial0: serial@1010c000 { diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts index 295aef448123..89103d54ecc1 100644 --- a/arch/arm/boot/dts/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts @@ -555,7 +555,7 @@ interrupt-parent = <&intc_pb11mp>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; watchdog@1000f000 { diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index 6f61f968d689..ec1507c5147c 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -390,7 +390,7 @@ compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; wdog0: watchdog@1000f000 { diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi index 76b2025c67b4..83bcf9fe0152 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi @@ -76,8 +76,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -95,8 +95,8 @@ vddio_ddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -118,8 +118,8 @@ vdd_core: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -160,8 +160,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { @@ -175,9 +175,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; - regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-state-standby { regulator-on-in-suspend; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 6865be8d7787..dd1dec9d4e07 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -196,8 +196,8 @@ regulators { vdd_io_reg: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -215,8 +215,8 @@ VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -234,8 +234,8 @@ VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -257,7 +257,6 @@ regulator-max-microvolt = <1850000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; - regulator-always-on; regulator-state-standby { regulator-on-in-suspend; @@ -272,8 +271,8 @@ LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; regulator-always-on; regulator-state-standby { @@ -287,8 +286,8 @@ LDO2 { regulator-name = "LDO2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; regulator-state-standby { diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index de44da2e4aae..3b25c67795dd 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -244,8 +244,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -264,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -285,8 +285,8 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -306,7 +306,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -326,8 +326,8 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi index 5463443f0762..cbd094dde6d0 100644 --- a/arch/arm/boot/dts/bcm63178.dtsi +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + CA7_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; @@ -39,6 +40,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -46,10 +48,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; @@ -80,23 +82,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x4000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi index e610c102498f..8aa47a2583b2 100644 --- a/arch/arm/boot/dts/bcm6846.dtsi +++ b/arch/arm/boot/dts/bcm6846.dtsi @@ -40,10 +40,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; @@ -65,23 +65,23 @@ psci { compatible = "arm,psci-0.2"; method = "smc"; - cpu_off = <1>; - cpu_on = <2>; }; axi@81000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x81000000 0x4000>; + ranges = <0 0x81000000 0x8000>; gic: interrupt-controller@1000 { compatible = "arm,cortex-a7-gic"; #interrupt-cells = <3>; - #address-cells = <0>; interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; reg = <0x1000 0x1000>, - <0x2000 0x2000>; + <0x2000 0x2000>, + <0x4000 0x2000>, + <0x6000 0x2000>; }; }; diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi index a7dff596fe1e..1e8b5fa96c25 100644 --- a/arch/arm/boot/dts/bcm6878.dtsi +++ b/arch/arm/boot/dts/bcm6878.dtsi @@ -32,6 +32,7 @@ next-level-cache = <&L2_0>; enable-method = "psci"; }; + L2_0: l2-cache0 { compatible = "cache"; }; @@ -39,10 +40,10 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; arm,cpu-registers-not-fw-configured; }; diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi index 095c9143d99a..6b791d515e29 100644 --- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi @@ -51,16 +51,6 @@ vin-supply = <®_3p3v_s5>; }; - reg_3p3v_s0: regulator-3p3v-s0 { - compatible = "regulator-fixed"; - regulator-name = "V_3V3_S0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <®_3p3v_s5>; - }; - reg_3p3v_s5: regulator-3p3v-s5 { compatible = "regulator-fixed"; regulator-name = "V_3V3_S5"; @@ -259,7 +249,7 @@ /* default boot source: workaround #1 for errata ERR006282 */ smarc_flash: flash@0 { - compatible = "winbond,w25q16dw", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index a1676b5d2980..c5a98b0110dd 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -28,7 +28,7 @@ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; }; - backlight_led: backlight_led { + backlight_led: backlight-led { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000 0>; brightness-levels = <0 16 64 255>; diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts index d47bfb66d069..4c22e4436271 100644 --- a/arch/arm/boot/dts/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -178,12 +178,12 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp@300000 { + spi@300000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x00300000 0x1000>; interrupts-extended = <&impd1_vic 3>; clocks = <&impd1_sspclk>, <&sysclk>; - clock-names = "spiclk", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; impd1_gpio0: gpio@400000 { diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 79f7cc241282..a520615f4d8d 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -391,7 +391,7 @@ reg = <0x101f4000 0x1000>; interrupts = <11>; clocks = <&xtal24mhz>, <&pclk>; - clock-names = "SSPCLK", "apb_pclk"; + clock-names = "sspclk", "apb_pclk"; }; fpga { diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index da90ce9cd42e..e185eee18856 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -196,7 +196,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 0384030d8b25..b2311f004618 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -188,7 +188,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_XDMAC=y CONFIG_STAGING=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index df6d673e83d5..f4501dea98b0 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -541,10 +541,42 @@ extern u32 at91_pm_suspend_in_sram_sz; static int at91_suspend_finish(unsigned long val) { + unsigned char modified_gray_code[] = { + 0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d, + 0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b, + 0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13, + 0x10, 0x11, + }; + unsigned int tmp, index; int i; if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) { /* + * Bootloader will perform DDR recalibration and will try to + * restore the ZQ0SR0 with the value saved here. But the + * calibration is buggy and restoring some values from ZQ0SR0 + * is forbidden and risky thus we need to provide processed + * values for these (modified gray code values). + */ + tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0); + + /* Store pull-down output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index]; + + /* Store pull-up output impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-down on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* Store pull-up on-die termination impedance select. */ + index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f; + soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index]; + + /* * The 1st 8 words of memory might get corrupted in the process * of DDR PHY recalibration; it is saved here in securam and it * will be restored later, after recalibration, by bootloader @@ -1066,10 +1098,6 @@ static int __init at91_pm_backup_init(void) of_scan_flat_dt(at91_pm_backup_scan_memcs, &located); if (!located) goto securam_fail; - - /* DDR3PHY_ZQ0SR0 */ - soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy + - 0x188); } return 0; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index abe4ced33eda..ffed4d949042 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -172,9 +172,15 @@ sr_ena_2: /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 - ldr tmp1, [r3, #DDR3PHY_PIR] - orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + + /* Disable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] sr_ena_3: /* Power down DDR PHY data receivers. */ @@ -221,10 +227,14 @@ sr_ena_3: bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0 str tmp1, [r3, #DDR3PHY_DSGCR] - /* Take DDR PHY's DLL out of bypass mode. */ - ldr tmp1, [r3, #DDR3PHY_PIR] - bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP - str tmp1, [r3, #DDR3PHY_PIR] + /* Enable DX DLLs. */ + ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX0DLLCR] + + ldr tmp1, [r3, #DDR3PHY_DX1DLLCR] + bic tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS + str tmp1, [r3, #DDR3PHY_DX1DLLCR] /* Enable quasi-dynamic programming. */ mov tmp1, #0 diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c index f9904716ec7f..f543e2adae0c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx-of.c +++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c @@ -46,7 +46,7 @@ static void __init ixp4xx_of_map_io(void) } /* - * We handle 4 differen SoC families. These compatible strings are enough + * We handle 4 different SoC families. These compatible strings are enough * to provide the core so that different boards can add their more detailed * specifics. */ diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8d0d45d168d1..2f27619d8abd 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -26,7 +26,8 @@ compatible = "arm,mhu", "arm,primecell"; reg = <0x0 0x2b1f0000 0x0 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; clocks = <&soc_refclk100mhz>; clock-names = "apb_pclk"; diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi index ba88d1596f6f..09d2b692e9e1 100644 --- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi +++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi @@ -67,7 +67,6 @@ port@0 { reg = <0>; csys2_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf0_out_port>; }; }; @@ -75,7 +74,6 @@ port@1 { reg = <1>; csys2_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etf1_out_port>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts index 40d34c8384a5..b949cac03742 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts @@ -25,7 +25,6 @@ &enetc_port0 { phy-handle = <&slot1_sgmii>; phy-mode = "2500base-x"; - managed = "in-band-status"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts index 35fb929e7bcc..d3ee6fc4baab 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts @@ -626,24 +626,28 @@ lan1: port@0 { reg = <0>; label = "lan1"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index d1b4582f44c4..b379c461aa13 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -32,10 +32,10 @@ }; /* Fixed clock dedicated to SPI CAN controller */ - clk20m: oscillator { + clk40m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <40000000>; }; gpio-keys { @@ -202,8 +202,8 @@ can1: can@0 { compatible = "microchip,mcp251xfd"; - clocks = <&clk20m>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk40m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_int>; reg = <0>; @@ -603,7 +603,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -745,6 +745,7 @@ }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index a616eb378002..0f13ee362771 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -70,7 +70,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; - cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -403,8 +403,8 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c5>; pinctrl-1 = <&pinctrl_i2c5_gpio>; - scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; @@ -648,10 +648,10 @@ pinctrl_ecspi1: dhcom-ecspi1-grp { fsl,pins = < - MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 - MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 - MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 - MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + MX8MP_IOMUXC_I2C1_SCL__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_I2C1_SDA__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_I2C2_SCL__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x40 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 521215520a0f..6630ec561dc2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -770,10 +770,10 @@ pinctrl_sai2: sai2grp { fsl,pins = < - MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC - MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 - MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK - MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK + MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index c5987bdbb383..1c74c6a19449 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -628,7 +628,7 @@ interrupts = <5 IRQ_TYPE_EDGE_FALLING>; reg = <0x4a>; /* Verdin GPIO_2 (SODIMM 208) */ - reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "disabled"; }; }; @@ -705,7 +705,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 899e8e7dbc24..802ad6e5cef6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -204,7 +204,6 @@ reg = <0x51>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rtc>; - interrupt-names = "irq"; interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; quartz-load-femtofarads = <7000>; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi index 7cbb0de060dd..1c15726cff8b 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi @@ -85,7 +85,7 @@ "renesas,rcar-gen4-hscif", "renesas,hscif"; reg = <0 0xe6540000 0 96>; - interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 514>, <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>, <&scif_clk>; diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c index d6b30d521307..775da69b8efa 100644 --- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c +++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c @@ -684,13 +684,14 @@ static int brcmstb_pm_probe(struct platform_device *pdev) const struct of_device_id *of_id = NULL; struct device_node *dn; void __iomem *base; - int ret, i; + int ret, i, s; /* AON ctrl registers */ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL); if (IS_ERR(base)) { pr_err("error mapping AON_CTRL\n"); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto aon_err; } ctrl.aon_ctrl_base = base; @@ -700,8 +701,10 @@ static int brcmstb_pm_probe(struct platform_device *pdev) /* Assume standard offset */ ctrl.aon_sram = ctrl.aon_ctrl_base + AON_CTRL_SYSTEM_DATA_RAM_OFS; + s = 0; } else { ctrl.aon_sram = base; + s = 1; } writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC); @@ -711,7 +714,8 @@ static int brcmstb_pm_probe(struct platform_device *pdev) (const void **)&ddr_phy_data); if (IS_ERR(base)) { pr_err("error mapping DDR PHY\n"); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto ddr_phy_err; } ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot; ctrl.pll_status_offset = ddr_phy_data->pll_status_offset; @@ -731,17 +735,20 @@ static int brcmstb_pm_probe(struct platform_device *pdev) for_each_matching_node(dn, ddr_shimphy_dt_ids) { i = ctrl.num_memc; if (i >= MAX_NUM_MEMC) { + of_node_put(dn); pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC); break; } base = of_io_request_and_map(dn, 0, dn->full_name); if (IS_ERR(base)) { + of_node_put(dn); if (!ctrl.support_warm_boot) break; pr_err("error mapping DDR SHIMPHY %d\n", i); - return PTR_ERR(base); + ret = PTR_ERR(base); + goto ddr_shimphy_err; } ctrl.memcs[i].ddr_shimphy_base = base; ctrl.num_memc++; @@ -752,14 +759,18 @@ static int brcmstb_pm_probe(struct platform_device *pdev) for_each_matching_node(dn, brcmstb_memc_of_match) { base = of_iomap(dn, 0); if (!base) { + of_node_put(dn); pr_err("error mapping DDR Sequencer %d\n", i); - return -ENOMEM; + ret = -ENOMEM; + goto brcmstb_memc_err; } of_id = of_match_node(brcmstb_memc_of_match, dn); if (!of_id) { iounmap(base); - return -EINVAL; + of_node_put(dn); + ret = -EINVAL; + goto brcmstb_memc_err; } ddr_seq_data = of_id->data; @@ -779,21 +790,24 @@ static int brcmstb_pm_probe(struct platform_device *pdev) dn = of_find_matching_node(NULL, sram_dt_ids); if (!dn) { pr_err("SRAM not found\n"); - return -EINVAL; + ret = -EINVAL; + goto brcmstb_memc_err; } ret = brcmstb_init_sram(dn); of_node_put(dn); if (ret) { pr_err("error setting up SRAM for PM\n"); - return ret; + goto brcmstb_memc_err; } ctrl.pdev = pdev; ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL); - if (!ctrl.s3_params) - return -ENOMEM; + if (!ctrl.s3_params) { + ret = -ENOMEM; + goto s3_params_err; + } ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params, sizeof(*ctrl.s3_params), DMA_TO_DEVICE); @@ -813,7 +827,21 @@ static int brcmstb_pm_probe(struct platform_device *pdev) out: kfree(ctrl.s3_params); - +s3_params_err: + iounmap(ctrl.boot_sram); +brcmstb_memc_err: + for (i--; i >= 0; i--) + iounmap(ctrl.memcs[i].ddr_ctrl); +ddr_shimphy_err: + for (i = 0; i < ctrl.num_memc; i++) + iounmap(ctrl.memcs[i].ddr_shimphy_base); + + iounmap(ctrl.memcs[0].ddr_phy_base); +ddr_phy_err: + iounmap(ctrl.aon_ctrl_base); + if (s) + iounmap(ctrl.aon_sram); +aon_err: pr_warn("PM: initialization failed with code %d\n", ret); return ret; diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index 07d52cafbb31..fcec6ed83d5e 100644 --- a/drivers/soc/fsl/Kconfig +++ b/drivers/soc/fsl/Kconfig @@ -24,6 +24,7 @@ config FSL_MC_DPIO tristate "QorIQ DPAA2 DPIO driver" depends on FSL_MC_BUS select SOC_BUS + select FSL_GUTS select DIMLIB help Driver for the DPAA2 DPIO object. A DPIO provides queue and diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c index 6383a4edc360..88aee59730e3 100644 --- a/drivers/soc/imx/gpcv2.c +++ b/drivers/soc/imx/gpcv2.c @@ -335,6 +335,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd) } } + reset_control_assert(domain->reset); + /* Enable reset clocks for all devices in the domain */ ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks); if (ret) { @@ -342,7 +344,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd) goto out_regulator_disable; } - reset_control_assert(domain->reset); + /* delays for reset to propagate */ + udelay(5); if (domain->bits.pxx) { /* request the domain to power up */ diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c index dff7529268e4..972f289d300a 100644 --- a/drivers/soc/imx/imx8m-blk-ctrl.c +++ b/drivers/soc/imx/imx8m-blk-ctrl.c @@ -243,7 +243,6 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev) ret = PTR_ERR(domain->power_dev); goto cleanup_pds; } - dev_set_name(domain->power_dev, "%s", data->name); domain->genpd.name = data->name; domain->genpd.power_on = imx8m_blk_ctrl_power_on; diff --git a/drivers/tee/tee_shm.c b/drivers/tee/tee_shm.c index 1175f3a46859..27295bda3e0b 100644 --- a/drivers/tee/tee_shm.c +++ b/drivers/tee/tee_shm.c @@ -9,6 +9,7 @@ #include <linux/sched.h> #include <linux/slab.h> #include <linux/tee_drv.h> +#include <linux/uaccess.h> #include <linux/uio.h> #include "tee_private.h" diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h index 9e17247474fa..6ce3bd22f6c6 100644 --- a/include/soc/at91/sama7-ddr.h +++ b/include/soc/at91/sama7-ddr.h @@ -38,6 +38,14 @@ #define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */ #define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */ +#define DDR3PHY_ZQ0SR0_PDO_OFF (0) /* Pull-down output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PUO_OFF (5) /* Pull-up output impedance select offset */ +#define DDR3PHY_ZQ0SR0_PDODT_OFF (10) /* Pull-down on-die termination impedance select offset */ +#define DDR3PHY_ZQ0SRO_PUODT_OFF (15) /* Pull-up on-die termination impedance select offset */ + +#define DDR3PHY_DX0DLLCR (0x1CC) /* DDR3PHY DATX8 DLL Control Register */ +#define DDR3PHY_DX1DLLCR (0x20C) /* DDR3PHY DATX8 DLL Control Register */ +#define DDR3PHY_DXDLLCR_DLLDIS (1 << 31) /* DLL Disable */ /* UDDRC */ #define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */ |