ath10k: add workqueue for RX path of sdio

For RX, it has two parts, one is to read data from sdio, another
is to indicate the packets to upper stack. Recently it has only
one thread to do all RX things, it results that it is sequential
for RX and low throughout, change RX to parallel for the two parts
will increase throughout.

This patch move the indication to a workqueue, it results in
significant performance improvement on RX path.

Udp rx throughout is 200Mbps without this patch, and it arrives
400Mbps with this patch.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWPZ-1

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

4 files changed, 44 insertions, 3 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index af68eb5d0776..c5407f5080b2 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -124,6 +124,7 @@ struct ath10k_skb_cb {
 struct ath10k_skb_rxcb {
 	dma_addr_t paddr;
 	struct hlist_node hlist;
+	u8 eid;
 };
 
 static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index d95b63f133ab..edda6dd93476 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2235,7 +2235,10 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 	qos = ieee80211_is_data_qos(hdr->frame_control);
+
 	rx_status = IEEE80211_SKB_RXCB(skb);
+	memset(rx_status, 0, sizeof(*rx_status));
+
 	rx_status->chains |= BIT(0);
 	if (rx->ppdu.combined_rssi == 0) {
 		/* SDIO firmware does not provide signal */
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 23a6176fbde6..c7d09b07a382 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -419,6 +419,7 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 	struct ath10k_htc *htc = &ar->htc;
 	struct ath10k_sdio_rx_data *pkt;
 	struct ath10k_htc_ep *ep;
+	struct ath10k_skb_rxcb *cb;
 	enum ath10k_htc_ep_id id;
 	int ret, i, *n_lookahead_local;
 	u32 *lookaheads_local;
@@ -464,10 +465,16 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 		if (ret)
 			goto out;
 
-		if (!pkt->trailer_only)
-			ep->ep_ops.ep_rx_complete(ar_sdio->ar, pkt->skb);
-		else
+		if (!pkt->trailer_only) {
+			cb = ATH10K_SKB_RXCB(pkt->skb);
+			cb->eid = id;
+
+			skb_queue_tail(&ar_sdio->rx_head, pkt->skb);
+			queue_work(ar->workqueue_aux,
+				   &ar_sdio->async_work_rx);
+		} else {
 			kfree_skb(pkt->skb);
+		}
 
 		/* The RX complete handler now owns the skb...*/
 		pkt->skb = NULL;
@@ -1317,6 +1324,28 @@ static void __ath10k_sdio_write_async(struct ath10k *ar,
 	ath10k_sdio_free_bus_req(ar, req);
 }
 
+/* To improve throughput use workqueue to deliver packets to HTC layer,
+ * this way SDIO bus is utilised much better.
+ */
+static void ath10k_rx_indication_async_work(struct work_struct *work)
+{
+	struct ath10k_sdio *ar_sdio = container_of(work, struct ath10k_sdio,
+						   async_work_rx);
+	struct ath10k *ar = ar_sdio->ar;
+	struct ath10k_htc_ep *ep;
+	struct ath10k_skb_rxcb *cb;
+	struct sk_buff *skb;
+
+	while (true) {
+		skb = skb_dequeue(&ar_sdio->rx_head);
+		if (!skb)
+			break;
+		cb = ATH10K_SKB_RXCB(skb);
+		ep = &ar->htc.endpoint[cb->eid];
+		ep->ep_ops.ep_rx_complete(ar, skb);
+	}
+}
+
 static void ath10k_sdio_write_async_work(struct work_struct *work)
 {
 	struct ath10k_sdio *ar_sdio = container_of(work, struct ath10k_sdio,
@@ -2087,6 +2116,9 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 	for (i = 0; i < ATH10K_SDIO_BUS_REQUEST_MAX_NUM; i++)
 		ath10k_sdio_free_bus_req(ar, &ar_sdio->bus_req[i]);
 
+	skb_queue_head_init(&ar_sdio->rx_head);
+	INIT_WORK(&ar_sdio->async_work_rx, ath10k_rx_indication_async_work);
+
 	dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, id->device);
 	switch (dev_id_base) {
 	case QCA_MANUFACTURER_ID_AR6005_BASE:
diff --git a/drivers/net/wireless/ath/ath10k/sdio.h b/drivers/net/wireless/ath/ath10k/sdio.h
index 00bd4caa7fa1..9acaf0229cf2 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.h
+++ b/drivers/net/wireless/ath/ath10k/sdio.h
@@ -187,6 +187,9 @@ struct ath10k_sdio {
 	struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
 	/* free list of bus requests */
 	struct list_head bus_req_freeq;
+
+	struct sk_buff_head rx_head;
+
 	/* protects access to bus_req_freeq */
 	spinlock_t lock;
 
@@ -213,6 +216,8 @@ struct ath10k_sdio {
 	struct list_head wr_asyncq;
 	/* protects access to wr_asyncq */
 	spinlock_t wr_async_lock;
+
+	struct work_struct async_work_rx;
 };
 
 static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)