summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2009-11-25 10:08:33 +0300
committerJeff Garzik <jgarzik@redhat.com>2010-08-26 03:24:15 +0400
commit6d981b9a91be29c0deae5ac794a4fe885027032f (patch)
tree9a485db3c5771caccf82345b1f67de60704ee2ae
parentaba8a08ded89a74f1ba04ae94ecc98f26e27d41c (diff)
downloadlinux-6d981b9a91be29c0deae5ac794a4fe885027032f.tar.xz
libata: remove no longer needed pata_winbond driver
Winbond W83759A controller is fully supported by pata_legacy driver so remove no longer needed pata_winbond driver. Leave PATA_WINBOND_VLB config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_winbond driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-rw-r--r--drivers/ata/Kconfig1
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/pata_legacy.c15
-rw-r--r--drivers/ata/pata_winbond.c282
4 files changed, 14 insertions, 285 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 65e3e2708371..11ec911016c6 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -828,6 +828,7 @@ config PATA_SAMSUNG_CF
config PATA_WINBOND_VLB
tristate "Winbond W83759A VLB PATA support (Experimental)"
depends on ISA && EXPERIMENTAL
+ select PATA_LEGACY
help
Support for the Winbond W83759A controller on Vesa Local Bus
systems.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 158eaa961b1e..d5df04a395ca 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -89,7 +89,6 @@ obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
-obj-$(CONFIG_PATA_WINBOND_VLB) += pata_winbond.o
obj-$(CONFIG_PATA_PXA) += pata_pxa.o
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 9df1ff7e1eaa..eaf194138f21 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -44,6 +44,9 @@
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
* opti82c465mv/promise 20230c/20630/qdi65x0/winbond83759A
*
+ * Support for the Winbond 83759A when operating in advanced mode.
+ * Multichip mode is not currently supported.
+ *
* Use the autospeed and pio_mask options with:
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
* Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
@@ -135,12 +138,18 @@ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
static int qdi; /* Set to probe QDI controllers */
-static int winbond; /* Set to probe Winbond controllers,
- give I/O port if non standard */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+#ifdef PATA_WINBOND_VLB_MODULE
+static int winbond = 1; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#else
+static int winbond; /* Set to probe Winbond controllers,
+ give I/O port if non standard */
+#endif
+
/**
* legacy_probe_add - Add interface to probe list
* @port: Controller port
@@ -1297,6 +1306,7 @@ MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for legacy ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_winbond");
module_param(probe_all, int, 0);
module_param(autospeed, int, 0);
@@ -1305,6 +1315,7 @@ module_param(ht6560b, int, 0);
module_param(opti82c611a, int, 0);
module_param(opti82c46x, int, 0);
module_param(qdi, int, 0);
+module_param(winbond, int, 0);
module_param(pio_mask, int, 0);
module_param(iordy_mask, int, 0);
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
deleted file mode 100644
index 6d8619b6f670..000000000000
--- a/drivers/ata/pata_winbond.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * pata_winbond.c - Winbond VLB ATA controllers
- * (C) 2006 Red Hat
- *
- * Support for the Winbond 83759A when operating in advanced mode.
- * Multichip mode is not currently supported.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.3"
-
-#define NR_HOST 4 /* Two winbond controllers, two channels each */
-
-struct winbond_data {
- unsigned long config;
- struct platform_device *platform_dev;
-};
-
-static struct ata_host *winbond_host[NR_HOST];
-static struct winbond_data winbond_data[NR_HOST];
-static int nr_winbond_host;
-
-#ifdef MODULE
-static int probe_winbond = 1;
-#else
-static int probe_winbond;
-#endif
-
-static DEFINE_SPINLOCK(winbond_lock);
-
-static void winbond_writecfg(unsigned long port, u8 reg, u8 val)
-{
- unsigned long flags;
- spin_lock_irqsave(&winbond_lock, flags);
- outb(reg, port + 0x01);
- outb(val, port + 0x02);
- spin_unlock_irqrestore(&winbond_lock, flags);
-}
-
-static u8 winbond_readcfg(unsigned long port, u8 reg)
-{
- u8 val;
-
- unsigned long flags;
- spin_lock_irqsave(&winbond_lock, flags);
- outb(reg, port + 0x01);
- val = inb(port + 0x02);
- spin_unlock_irqrestore(&winbond_lock, flags);
-
- return val;
-}
-
-static void winbond_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct winbond_data *winbond = ap->host->private_data;
- int active, recovery;
- u8 reg;
- int timing = 0x88 + (ap->port_no * 4) + (adev->devno * 2);
-
- reg = winbond_readcfg(winbond->config, 0x81);
-
- /* Get the timing data in cycles */
- if (reg & 0x40) /* Fast VLB bus, assume 50MHz */
- ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- else
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
- recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
- timing = (active << 4) | recovery;
- winbond_writecfg(winbond->config, timing, reg);
-
- /* Load the setup timing */
-
- reg = 0x35;
- if (adev->class != ATA_DEV_ATA)
- reg |= 0x08; /* FIFO off */
- if (!ata_pio_need_iordy(adev))
- reg |= 0x02; /* IORDY off */
- reg |= (clamp_val(t.setup, 0, 3) << 6);
- winbond_writecfg(winbond->config, timing + 1, reg);
-}
-
-
-static unsigned int winbond_data_xfer(struct ata_device *dev,
- unsigned char *buf, unsigned int buflen, int rw)
-{
- struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
-
- if (ata_id_has_dword_io(dev->id)) {
- if (rw == READ)
- ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
- if (unlikely(slop)) {
- __le32 pad;
- if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
- } else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- }
- buflen += 4 - slop;
- }
- } else
- buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
- return buflen;
-}
-
-static struct scsi_host_template winbond_sht = {
- ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations winbond_port_ops = {
- .inherits = &ata_sff_port_ops,
- .sff_data_xfer = winbond_data_xfer,
- .cable_detect = ata_cable_40wire,
- .set_piomode = winbond_set_piomode,
-};
-
-/**
- * winbond_init_one - attach a winbond interface
- * @type: Type to display
- * @io: I/O port start
- * @irq: interrupt line
- * @fast: True if on a > 33Mhz VLB
- *
- * Register a VLB bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
- */
-
-static __init int winbond_init_one(unsigned long port)
-{
- struct platform_device *pdev;
- u8 reg;
- int i, rc;
-
- reg = winbond_readcfg(port, 0x81);
- reg |= 0x80; /* jumpered mode off */
- winbond_writecfg(port, 0x81, reg);
- reg = winbond_readcfg(port, 0x83);
- reg |= 0xF0; /* local control */
- winbond_writecfg(port, 0x83, reg);
- reg = winbond_readcfg(port, 0x85);
- reg |= 0xF0; /* programmable timing */
- winbond_writecfg(port, 0x85, reg);
-
- reg = winbond_readcfg(port, 0x81);
-
- if (!(reg & 0x03)) /* Disabled */
- return -ENODEV;
-
- for (i = 0; i < 2 ; i ++) {
- unsigned long cmd_port = 0x1F0 - (0x80 * i);
- unsigned long ctl_port = cmd_port + 0x206;
- struct ata_host *host;
- struct ata_port *ap;
- void __iomem *cmd_addr, *ctl_addr;
-
- if (!(reg & (1 << i)))
- continue;
-
- pdev = platform_device_register_simple(DRV_NAME, nr_winbond_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- rc = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- goto err_unregister;
- ap = host->ports[0];
-
- rc = -ENOMEM;
- cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8);
- ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1);
- if (!cmd_addr || !ctl_addr)
- goto err_unregister;
-
- ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
-
- ap->ops = &winbond_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- ap->ioaddr.cmd_addr = cmd_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_sff_std_ports(&ap->ioaddr);
-
- /* hook in a private data structure per channel */
- host->private_data = &winbond_data[nr_winbond_host];
- winbond_data[nr_winbond_host].config = port;
- winbond_data[nr_winbond_host].platform_dev = pdev;
-
- /* activate */
- rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
- &winbond_sht);
- if (rc)
- goto err_unregister;
-
- winbond_host[nr_winbond_host++] = dev_get_drvdata(&pdev->dev);
- }
-
- return 0;
-
- err_unregister:
- platform_device_unregister(pdev);
- return rc;
-}
-
-/**
- * winbond_init - attach winbond interfaces
- *
- * Attach winbond IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int winbond_init(void)
-{
- static const unsigned long config[2] = { 0x130, 0x1B0 };
-
- int ct = 0;
- int i;
-
- if (probe_winbond == 0)
- return -ENODEV;
-
- /*
- * Check both base addresses
- */
-
- for (i = 0; i < 2; i++) {
- if (probe_winbond & (1<<i)) {
- int ret = 0;
- unsigned long port = config[i];
-
- if (request_region(port, 2, "pata_winbond")) {
- ret = winbond_init_one(port);
- if (ret <= 0)
- release_region(port, 2);
- else ct+= ret;
- }
- }
- }
- if (ct != 0)
- return 0;
- return -ENODEV;
-}
-
-static __exit void winbond_exit(void)
-{
- int i;
-
- for (i = 0; i < nr_winbond_host; i++) {
- ata_host_detach(winbond_host[i]);
- release_region(winbond_data[i].config, 2);
- platform_device_unregister(winbond_data[i].platform_dev);
- }
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for Winbond VL ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(winbond_init);
-module_exit(winbond_exit);
-
-module_param(probe_winbond, int, 0);
-