summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVille Syrjälä <ville.syrjala@linux.intel.com>2018-11-14 16:32:55 +0300
committerJoonas Lahtinen <joonas.lahtinen@linux.intel.com>2018-11-15 14:57:20 +0300
commit6e8adf6f4a4fa57dd3bef6b70de96e2b7b311204 (patch)
treec718f7455da456bf8eb64df62965c77b68a8d456
parent27971d613fcb5b6ad96320bc4f2c90f4d4fde768 (diff)
downloadlinux-6e8adf6f4a4fa57dd3bef6b70de96e2b7b311204.tar.xz
drm/i915: Account for scale factor when calculating initial phase
To get the initial phase correct we need to account for the scale factor as well. I forgot this initially and was mostly looking at heavily upscaled content where the minor difference between -0.5 and the proper initial phase was not readily apparent. And let's toss in a comment that tries to explain the formula a little bit. v2: The initial phase upper limit is 1.5, not 24.0! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 0a59952b24e2 ("drm/i915: Configure SKL+ scaler initial phase correctly") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029181820.21956-1-ville.syrjala@linux.intel.com Tested-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit e7a278a329dd8aa2c70c564849f164cb5673689c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-rw-r--r--drivers/gpu/drm/i915/intel_display.c45
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h2
-rw-r--r--drivers/gpu/drm/i915/intel_sprite.c20
3 files changed, 57 insertions, 10 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 23d8008a93bb..a54843fdeb2f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4850,8 +4850,31 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
* chroma samples for both of the luma samples, and thus we don't
* actually get the expected MPEG2 chroma siting convention :(
* The same behaviour is observed on pre-SKL platforms as well.
+ *
+ * Theory behind the formula (note that we ignore sub-pixel
+ * source coordinates):
+ * s = source sample position
+ * d = destination sample position
+ *
+ * Downscaling 4:1:
+ * -0.5
+ * | 0.0
+ * | | 1.5 (initial phase)
+ * | | |
+ * v v v
+ * | s | s | s | s |
+ * | d |
+ *
+ * Upscaling 1:4:
+ * -0.5
+ * | -0.375 (initial phase)
+ * | | 0.0
+ * | | |
+ * v v v
+ * | s |
+ * | d | d | d | d |
*/
-u16 skl_scaler_calc_phase(int sub, bool chroma_cosited)
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
{
int phase = -0x8000;
u16 trip = 0;
@@ -4859,6 +4882,15 @@ u16 skl_scaler_calc_phase(int sub, bool chroma_cosited)
if (chroma_cosited)
phase += (sub - 1) * 0x8000 / sub;
+ phase += scale / (2 * sub);
+
+ /*
+ * Hardware initial phase limited to [-0.5:1.5].
+ * Since the max hardware scale factor is 3.0, we
+ * should never actually excdeed 1.0 here.
+ */
+ WARN_ON(phase < -0x8000 || phase > 0x18000);
+
if (phase < 0)
phase = 0x10000 + phase;
else
@@ -5067,13 +5099,20 @@ static void skylake_pfit_enable(struct intel_crtc *crtc)
if (crtc->config->pch_pfit.enabled) {
u16 uv_rgb_hphase, uv_rgb_vphase;
+ int pfit_w, pfit_h, hscale, vscale;
int id;
if (WARN_ON(crtc->config->scaler_state.scaler_id < 0))
return;
- uv_rgb_hphase = skl_scaler_calc_phase(1, false);
- uv_rgb_vphase = skl_scaler_calc_phase(1, false);
+ pfit_w = (crtc->config->pch_pfit.size >> 16) & 0xFFFF;
+ pfit_h = crtc->config->pch_pfit.size & 0xFFFF;
+
+ hscale = (crtc->config->pipe_src_w << 16) / pfit_w;
+ vscale = (crtc->config->pipe_src_h << 16) / pfit_h;
+
+ uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+ uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
id = scaler_state->scaler_id;
I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f8dc84b2d2d3..8b298e5f012d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1646,7 +1646,7 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state);
-u16 skl_scaler_calc_phase(int sub, bool chroma_center);
+u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_center);
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_max_scale(const struct intel_crtc_state *crtc_state,
u32 pixel_format);
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index fa7eaace5f92..d3090a7537bb 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -318,22 +318,30 @@ skl_program_scaler(struct intel_plane *plane,
uint32_t crtc_h = drm_rect_height(&plane_state->base.dst);
u16 y_hphase, uv_rgb_hphase;
u16 y_vphase, uv_rgb_vphase;
+ int hscale, vscale;
+
+ hscale = drm_rect_calc_hscale(&plane_state->base.src,
+ &plane_state->base.dst,
+ 0, INT_MAX);
+ vscale = drm_rect_calc_vscale(&plane_state->base.src,
+ &plane_state->base.dst,
+ 0, INT_MAX);
/* TODO: handle sub-pixel coordinates */
if (plane_state->base.fb->format->format == DRM_FORMAT_NV12) {
- y_hphase = skl_scaler_calc_phase(1, false);
- y_vphase = skl_scaler_calc_phase(1, false);
+ y_hphase = skl_scaler_calc_phase(1, hscale, false);
+ y_vphase = skl_scaler_calc_phase(1, vscale, false);
/* MPEG2 chroma siting convention */
- uv_rgb_hphase = skl_scaler_calc_phase(2, true);
- uv_rgb_vphase = skl_scaler_calc_phase(2, false);
+ uv_rgb_hphase = skl_scaler_calc_phase(2, hscale, true);
+ uv_rgb_vphase = skl_scaler_calc_phase(2, vscale, false);
} else {
/* not used */
y_hphase = 0;
y_vphase = 0;
- uv_rgb_hphase = skl_scaler_calc_phase(1, false);
- uv_rgb_vphase = skl_scaler_calc_phase(1, false);
+ uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
+ uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
}
I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id),