summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-05 01:02:09 +0400
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-05 01:02:09 +0400
commit98f486f18d16e2214728d101ed8b6a12dce75539 (patch)
tree987e2fcbd6089a94a00e489cd62fec1b8b10cd02
parent84cbd7222b2b00dcddef3103203986b3d59c836a (diff)
parent97191d734f6ac028e5e6dcd574378c1544a16c0b (diff)
downloadlinux-98f486f18d16e2214728d101ed8b6a12dce75539.tar.xz
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers: Kontron PLD, Wondermedia VT - mv64xxx driver gained sun4i support and a bigger cleanup - duplicate driver 'intel-mid' removed - added generic device tree binding for sda holding time (and designware driver already uses it) - we tried to allow driver probing with only device tree and no i2c ids, but I had to revert it because of side effects. Needs some rethinking. - driver bugfixes, cleanups... * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits) i2c-designware: use div_u64 to fix link i2c: Kontron PLD i2c bus driver i2c: iop3xxx: fix build failure after waitqueue changes i2c-designware: make SDA hold time configurable i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided i2c: imx: allow autoloading on dt ids i2c: mv64xxx: Fix transfer error code i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs i2c: omap: correct usage of the interrupt enable register i2c-pxa: prepare clock before use Revert "i2c: core: make it possible to match a pure device tree driver" i2c: nomadik: allocate adapter number dynamically i2c: nomadik: support elder Nomadiks i2c: mv64xxx: Add Allwinner sun4i compatible i2c: mv64xxx: make the registers offset configurable i2c: mv64xxx: Add macros to access parts of registers i2c: vt8500: Add support for I2C bus on Wondermedia SoCs i2c: designware: fix race between subsequent xfers i2c: bfin-twi: Read and write the FIFO in loop i2c: core: make it possible to match a pure device tree driver ...
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-designware.txt15
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt6
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-vt8500.txt24
-rw-r--r--Documentation/i2c/busses/i2c-i8011
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/arc/boot/dts/abilis_tb100_dvk.dts10
-rw-r--r--arch/arc/boot/dts/abilis_tb101_dvk.dts10
-rw-r--r--drivers/i2c/busses/Kconfig34
-rw-r--r--drivers/i2c/busses/Makefile3
-rw-r--r--drivers/i2c/busses/i2c-bfin-twi.c47
-rw-r--r--drivers/i2c/busses/i2c-cpm.c4
-rw-r--r--drivers/i2c/busses/i2c-davinci.c8
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c30
-rw-r--r--drivers/i2c/busses/i2c-designware-core.h1
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c19
-rw-r--r--drivers/i2c/busses/i2c-i801.c3
-rw-r--r--drivers/i2c/busses/i2c-ibm_iic.c4
-rw-r--r--drivers/i2c/busses/i2c-imx.c15
-rw-r--r--drivers/i2c/busses/i2c-intel-mid.c1121
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c2
-rw-r--r--drivers/i2c/busses/i2c-kempld.c410
-rw-r--r--drivers/i2c/busses/i2c-mpc.c4
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c321
-rw-r--r--drivers/i2c/busses/i2c-mxs.c6
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c52
-rw-r--r--drivers/i2c/busses/i2c-omap.c23
-rw-r--r--drivers/i2c/busses/i2c-pxa.c6
-rw-r--r--drivers/i2c/busses/i2c-rcar.c7
-rw-r--r--drivers/i2c/busses/i2c-wmt.c479
29 files changed, 1268 insertions, 1398 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index e42a2ee233e6..7fd7fa25e9b0 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -10,6 +10,10 @@ Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
+Optional properties :
+ - i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
+ This option is only supported in hardware blocks version 1.11a or newer.
+
Example :
i2c@f0000 {
@@ -20,3 +24,14 @@ Example :
interrupts = <11>;
clock-frequency = <400000>;
};
+
+ i2c@1120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0x1120000 0x1000>;
+ interrupt-parent = <&ictl>;
+ interrupts = <12 1>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <300>;
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index f46d928aa73d..a1ee681942cc 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -6,7 +6,11 @@ Required properties :
- reg : Offset and length of the register set for the device
- compatible : Should be "marvell,mv64xxx-i2c"
- interrupts : The interrupt number
- - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Optional properties :
+
+ - clock-frequency : Desired I2C bus clock frequency in Hz. If not set the
+default frequency is 100kHz
Examples:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
new file mode 100644
index 000000000000..94a425eaa6c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+ Valid values are 100000 and 400000.
+ Default to 100000 if not specified, or invalid value.
+
+Example :
+
+ i2c_0: i2c@d8280000 {
+ compatible = "wm,wm8505-i2c";
+ reg = <0xd8280000 0x1000>;
+ interrupts = <19>;
+ clocks = <&clki2c0>;
+ clock-frequency = <400000>;
+ };
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index d55b8ab2d10f..d29dea0f3232 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -24,6 +24,7 @@ Supported adapters:
* Intel Lynx Point-LP (PCH)
* Intel Avoton (SOC)
* Intel Wellsburg (PCH)
+ * Intel Coleto Creek (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/MAINTAINERS b/MAINTAINERS
index 28ffeec53bb9..50105f98cb68 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1301,6 +1301,7 @@ S: Maintained
F: arch/arm/mach-vt8500/
F: drivers/clocksource/vt8500_timer.c
F: drivers/gpio/gpio-vt8500.c
+F: drivers/i2c/busses/i2c-wmt.c
F: drivers/mmc/host/wmt-sdmmc.c
F: drivers/pwm/pwm-vt8500.c
F: drivers/rtc/rtc-vt8500.c
diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts
index 0fa0d4abe795..ebc313a9f5b2 100644
--- a/arch/arc/boot/dts/abilis_tb100_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts
@@ -45,19 +45,19 @@
};
i2c0: i2c@FF120000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c1: i2c@FF121000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c2: i2c@FF122000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c3: i2c@FF123000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c4: i2c@FF124000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
leds {
diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts
index a4d80ce283ae..b204657993aa 100644
--- a/arch/arc/boot/dts/abilis_tb101_dvk.dts
+++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts
@@ -45,19 +45,19 @@
};
i2c0: i2c@FF120000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c1: i2c@FF121000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c2: i2c@FF122000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c3: i2c@FF123000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
i2c4: i2c@FF124000 {
- sda-hold-time = <432>;
+ i2c-sda-hold-time-ns = <432>;
};
leds {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 527503617ee2..fdc2ab4af315 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,6 +108,7 @@ config I2C_I801
Lynx Point-LP (PCH)
Avoton (SOC)
Wellsburg (PCH)
+ Coleto Creek (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -475,16 +476,6 @@ config I2C_IMX
This driver can also be built as a module. If so, the module
will be called i2c-imx.
-config I2C_INTEL_MID
- tristate "Intel Moorestown/Medfield Platform I2C controller"
- depends on PCI
- help
- Say Y here if you have an Intel Moorestown/Medfield platform I2C
- controller.
-
- This support is also available as a module. If so, the module
- will be called i2c-intel-mid.
-
config I2C_IOP3XX
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
@@ -495,6 +486,16 @@ config I2C_IOP3XX
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
+config I2C_KEMPLD
+ tristate "Kontron COM I2C Controller"
+ depends on MFD_KEMPLD
+ help
+ This enables support for the I2C bus interface on some Kontron ETX
+ and COMexpress (ETXexpress) modules.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-kempld.
+
config I2C_MPC
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC
@@ -508,10 +509,11 @@ config I2C_MPC
config I2C_MV64XXX
tristate "Marvell mv64xxx I2C Controller"
- depends on (MV64X60 || PLAT_ORION)
+ depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Marvell 64xxx line of host bridges.
+ This driver is also used for Allwinner SoCs I2C controllers.
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
@@ -725,6 +727,16 @@ config I2C_VERSATILE
This driver can also be built as a module. If so, the module
will be called i2c-versatile.
+config I2C_WMT
+ tristate "Wondermedia WM8xxx SoC I2C bus support"
+ depends on ARCH_VT8500
+ help
+ Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
+ SoCs.
+
+ This driver can also be built as a module. If so, the module will be
+ called i2c-wmt.
+
config I2C_OCTEON
tristate "Cavium OCTEON I2C bus support"
depends on CPU_CAVIUM_OCTEON
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 8f4fc23b85b1..d00997f3eb3b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -46,8 +46,8 @@ obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IMX) += i2c-imx.o
-obj-$(CONFIG_I2C_INTEL_MID) += i2c-intel-mid.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
+obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
obj-$(CONFIG_I2C_MXS) += i2c-mxs.o
@@ -71,6 +71,7 @@ obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
+obj-$(CONFIG_I2C_WMT) += i2c-wmt.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
obj-$(CONFIG_I2C_XLR) += i2c-xlr.o
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 05080c449c6b..13ea1c29873d 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -39,33 +39,40 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
unsigned short mast_stat = read_MASTER_STAT(iface);
if (twi_int_status & XMTSERV) {
+ if (iface->writeNum <= 0) {
+ /* start receive immediately after complete sending in
+ * combine mode.
+ */
+ if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) | MDIR);
+ else if (iface->manual_stop)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) | STOP);
+ else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+ iface->cur_msg + 1 < iface->msg_num) {
+ if (iface->pmsg[iface->cur_msg + 1].flags &
+ I2C_M_RD)
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) |
+ MDIR);
+ else
+ write_MASTER_CTL(iface,
+ read_MASTER_CTL(iface) &
+ ~MDIR);
+ }
+ }
/* Transmit next data */
- if (iface->writeNum > 0) {
+ while (iface->writeNum > 0 &&
+ (read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
SSYNC();
write_XMT_DATA8(iface, *(iface->transPtr++));
iface->writeNum--;
}
- /* start receive immediately after complete sending in
- * combine mode.
- */
- else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MDIR);
- else if (iface->manual_stop)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | STOP);
- else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
- iface->cur_msg + 1 < iface->msg_num) {
- if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) | MDIR);
- else
- write_MASTER_CTL(iface,
- read_MASTER_CTL(iface) & ~MDIR);
- }
}
if (twi_int_status & RCVSERV) {
- if (iface->readNum > 0) {
+ while (iface->readNum > 0 &&
+ (read_FIFO_STAT(iface) & RCVSTAT)) {
/* Receive next data */
*(iface->transPtr) = read_RCV_DATA8(iface);
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 9e6002108720..2e1f7eb55bf4 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -654,7 +654,7 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
cpm->ofdev = ofdev;
- dev_set_drvdata(&ofdev->dev, cpm);
+ platform_set_drvdata(ofdev, cpm);
cpm->adap = cpm_ops;
i2c_set_adapdata(&cpm->adap, cpm);
@@ -697,7 +697,7 @@ out_free:
static int cpm_i2c_remove(struct platform_device *ofdev)
{
- struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
+ struct cpm_i2c *cpm = platform_get_drvdata(ofdev);
i2c_del_adapter(&cpm->adap);
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cf20e06a88e1..fa556057d224 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -646,13 +646,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
struct resource *mem, *irq;
int r;
- /* NOTE: driver uses the static register mapping */
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -ENODEV;
- }
-
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq) {
dev_err(&pdev->dev, "no irq resource?\n");
@@ -697,6 +690,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
return -ENODEV;
clk_prepare_enable(dev->clk);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base)) {
r = PTR_ERR(dev->base);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index c41ca6354fc5..ad46616de29e 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -67,9 +67,12 @@
#define DW_IC_STATUS 0x70
#define DW_IC_TXFLR 0x74
#define DW_IC_RXFLR 0x78
+#define DW_IC_SDA_HOLD 0x7c
#define DW_IC_TX_ABRT_SOURCE 0x80
#define DW_IC_ENABLE_STATUS 0x9c
#define DW_IC_COMP_PARAM_1 0xf4
+#define DW_IC_COMP_VERSION 0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A
#define DW_IC_COMP_TYPE 0xfc
#define DW_IC_COMP_TYPE_VALUE 0x44570140
@@ -332,6 +335,16 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+ /* Configure SDA Hold Time if required */
+ if (dev->sda_hold_time) {
+ reg = dw_readl(dev, DW_IC_COMP_VERSION);
+ if (reg >= DW_IC_SDA_HOLD_MIN_VERS)
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+ else
+ dev_warn(dev->dev,
+ "Hardware too old to adjust SDA hold time.");
+ }
+
/* Configure Tx/Rx FIFO threshold levels */
dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
@@ -580,14 +593,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
i2c_dw_xfer_init(dev);
/* wait for tx to complete */
- ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+ ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
+ /* i2c_dw_init implicitly disables the adapter */
i2c_dw_init(dev);
ret = -ETIMEDOUT;
goto done;
- } else if (ret < 0)
- goto done;
+ }
+
+ /*
+ * We must disable the adapter before unlocking the &dev->lock mutex
+ * below. Otherwise the hardware might continue generating interrupts
+ * which in turn causes a race condition with the following transfer.
+ * Needs some more investigation if the additional interrupts are
+ * a hardware bug or this driver doesn't handle them correctly yet.
+ */
+ __i2c_dw_enable(dev, false);
if (dev->msg_err) {
ret = dev->msg_err;
@@ -596,8 +618,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
/* no error */
if (likely(!dev->cmd_err)) {
- /* Disable the adapter */
- __i2c_dw_enable(dev, false);
ret = num;
goto done;
}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index e761ad18dd61..912aa2262866 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -90,6 +90,7 @@ struct dw_i2c_dev {
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
int rx_outstanding;
+ u32 sda_hold_time;
};
#define ACCESS_SWAP 0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 35b70a1edf57..4c5fadabe49d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -34,6 +34,7 @@
#include <linux/sched.h>
#include <linux/err.h>
#include <linux/interrupt.h>
+#include <linux/of.h>
#include <linux/of_i2c.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
@@ -87,13 +88,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
struct resource *mem;
int irq, r;
- /* NOTE: driver uses the static register mapping */
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -EINVAL;
- }
-
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
@@ -104,6 +98,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
if (!dev)
return -ENOMEM;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base))
return PTR_ERR(dev->base);
@@ -121,6 +116,16 @@ static int dw_i2c_probe(struct platform_device *pdev)
return PTR_ERR(dev->clk);
clk_prepare_enable(dev->clk);
+ if (pdev->dev.of_node) {
+ u32 ht = 0;
+ u32 ic_clk = dev->get_clk_rate_khz(dev);
+
+ of_property_read_u32(pdev->dev.of_node,
+ "i2c-sda-hold-time-ns", &ht);
+ dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
+ 1000000);
+ }
+
dev->functionality =
I2C_FUNC_I2C |
I2C_FUNC_10BIT_ADDR |
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 3a6903f63913..4ebceed6bc66 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -58,6 +58,7 @@
Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
+ Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -169,6 +170,7 @@
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
@@ -817,6 +819,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 405a2e240454..973f51688276 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -705,7 +705,7 @@ static int iic_probe(struct platform_device *ofdev)
return -ENOMEM;
}
- dev_set_drvdata(&ofdev->dev, dev);
+ platform_set_drvdata(ofdev, dev);
dev->vaddr = of_iomap(np, 0);
if (dev->vaddr == NULL) {
@@ -782,7 +782,7 @@ error_cleanup:
*/
static int iic_remove(struct platform_device *ofdev)
{
- struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
+ struct ibm_iic_private *dev = platform_get_drvdata(ofdev);
i2c_del_adapter(&dev->adap);
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 82f20c60bb7b..e24279725d36 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -51,7 +51,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_i2c.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/i2c-imx.h>
/** Defines ********************************************************************
@@ -148,6 +147,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
{ .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
{
@@ -493,24 +493,19 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
struct imx_i2c_struct *i2c_imx;
struct resource *res;
struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
- struct pinctrl *pinctrl;
void __iomem *base;
int irq, ret;
u32 bitrate;
dev_dbg(&pdev->dev, "<%s>\n", __func__);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "can't get device resources\n");
- return -ENOENT;
- }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "can't get irq number\n");
return -ENOENT;
}
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
@@ -535,12 +530,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
i2c_imx->adapter.dev.of_node = pdev->dev.of_node;
i2c_imx->base = base;
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl)) {
- dev_err(&pdev->dev, "can't get/select pinctrl\n");
- return PTR_ERR(pinctrl);
- }
-
/* Get I2C clock */
i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(i2c_imx->clk)) {
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
deleted file mode 100644
index 0fb659726ffc..000000000000
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * Support for Moorestown/Medfield I2C chip
- *
- * Copyright (c) 2009 Intel Corporation.
- * Copyright (c) 2009 Synopsys. Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License, version
- * 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-
-#define DRIVER_NAME "i2c-intel-mid"
-#define VERSION "Version 0.5ac2"
-#define PLATFORM "Moorestown/Medfield"
-
-/* Tables use: 0 Moorestown, 1 Medfield */
-#define NUM_PLATFORMS 2
-enum platform_enum {
- MOORESTOWN = 0,
- MEDFIELD = 1,
-};
-
-enum mid_i2c_status {
- STATUS_IDLE = 0,
- STATUS_READ_START,
- STATUS_READ_IN_PROGRESS,
- STATUS_READ_SUCCESS,
- STATUS_WRITE_START,
- STATUS_WRITE_SUCCESS,
- STATUS_XFER_ABORT,
- STATUS_STANDBY
-};
-
-/**
- * struct intel_mid_i2c_private - per device I²C context
- * @adap: core i2c layer adapter information
- * @dev: device reference for power management
- * @base: register base
- * @speed: speed mode for this port
- * @complete: completion object for transaction wait
- * @abort: reason for last abort
- * @rx_buf: pointer into working receive buffer
- * @rx_buf_len: receive buffer length
- * @status: adapter state machine
- * @msg: the message we are currently processing
- * @platform: the MID device type we are part of
- * @lock: transaction serialization
- *
- * We allocate one of these per device we discover, it holds the core
- * i2c layer objects and the data we need to track privately.
- */
-struct intel_mid_i2c_private {
- struct i2c_adapter adap;
- struct device *dev;
- void __iomem *base;
- int speed;
- struct completion complete;
- int abort;
- u8 *rx_buf;
- int rx_buf_len;
- enum mid_i2c_status status;
- struct i2c_msg *msg;
- enum platform_enum platform;
- struct mutex lock;
-};
-
-#define NUM_SPEEDS 3
-
-#define ACTIVE 0
-#define STANDBY 1
-
-
-/* Control register */
-#define IC_CON 0x00
-#define SLV_DIS (1 << 6) /* Disable slave mode */
-#define RESTART (1 << 5) /* Send a Restart condition */
-#define ADDR_10BIT (1 << 4) /* 10-bit addressing */
-#define STANDARD_MODE (1 << 1) /* standard mode */
-#define FAST_MODE (2 << 1) /* fast mode */
-#define HIGH_MODE (3 << 1) /* high speed mode */
-#define MASTER_EN (1 << 0) /* Master mode */
-
-/* Target address register */
-#define IC_TAR 0x04
-#define IC_TAR_10BIT_ADDR (1 << 12) /* 10-bit addressing */
-#define IC_TAR_SPECIAL (1 << 11) /* Perform special I2C cmd */
-#define IC_TAR_GC_OR_START (1 << 10) /* 0: Gerneral Call Address */
- /* 1: START BYTE */
-/* Slave Address Register */
-#define IC_SAR 0x08 /* Not used in Master mode */
-
-/* High Speed Master Mode Code Address Register */
-#define IC_HS_MADDR 0x0c
-
-/* Rx/Tx Data Buffer and Command Register */
-#define IC_DATA_CMD 0x10
-#define IC_RD (1 << 8) /* 1: Read 0: Write */
-
-/* Standard Speed Clock SCL High Count Register */
-#define IC_SS_SCL_HCNT 0x14
-
-/* Standard Speed Clock SCL Low Count Register */
-#define IC_SS_SCL_LCNT 0x18
-
-/* Fast Speed Clock SCL High Count Register */
-#define IC_FS_SCL_HCNT 0x1c
-
-/* Fast Spedd Clock SCL Low Count Register */
-#define IC_FS_SCL_LCNT 0x20
-
-/* High Speed Clock SCL High Count Register */
-#define IC_HS_SCL_HCNT 0x24
-
-/* High Speed Clock SCL Low Count Register */
-#define IC_HS_SCL_LCNT 0x28
-
-/* Interrupt Status Register */
-#define IC_INTR_STAT 0x2c /* Read only */
-#define R_GEN_CALL (1 << 11)
-#define R_START_DET (1 << 10)
-#define R_STOP_DET (1 << 9)
-#define R_ACTIVITY (1 << 8)
-#define R_RX_DONE (1 << 7)
-#define R_TX_ABRT (1 << 6)
-#define R_RD_REQ (1 << 5)
-#define R_TX_EMPTY (1 << 4)
-#define R_TX_OVER (1 << 3)
-#define R_RX_FULL (1 << 2)
-#define R_RX_OVER (1 << 1)
-#define R_RX_UNDER (1 << 0)
-
-/* Interrupt Mask Register */
-#define IC_INTR_MASK 0x30 /* Read and Write */
-#define M_GEN_CALL (1 << 11)
-#define M_START_DET (1 << 10)
-#define M_STOP_DET (1 << 9)
-#define M_ACTIVITY (1 << 8)
-#define M_RX_DONE (1 << 7)
-#define M_TX_ABRT (1 << 6)
-#define M_RD_REQ (1 << 5)
-#define M_TX_EMPTY (1 << 4)
-#define M_TX_OVER (1 << 3)
-#define M_RX_FULL (1 << 2)
-#define M_RX_OVER (1 << 1)
-#define M_RX_UNDER (1 << 0)
-
-/* Raw Interrupt Status Register */
-#define IC_RAW_INTR_STAT 0x34 /* Read Only */
-#define GEN_CALL (1 << 11) /* General call */
-#define START_DET (1 << 10) /* (RE)START occurred */
-#define STOP_DET (1 << 9) /* STOP occurred */
-#define ACTIVITY (1 << 8) /* Bus busy */
-#define RX_DONE (1 << 7) /* Not used in Master mode */
-#define TX_ABRT (1 << 6) /* Transmit Abort */
-#define RD_REQ (1 << 5) /* Not used in Master mode */
-#define TX_EMPTY (1 << 4) /* TX FIFO <= threshold */
-#define TX_OVER (1 << 3) /* TX FIFO overflow */
-#define RX_FULL (1 << 2) /* RX FIFO >= threshold */
-#define RX_OVER (1 << 1) /* RX FIFO overflow */
-#define RX_UNDER (1 << 0) /* RX FIFO empty */
-
-/* Receive FIFO Threshold Register */
-#define IC_RX_TL 0x38
-
-/* Transmit FIFO Treshold Register */
-#define IC_TX_TL 0x3c
-
-/* Clear Combined and Individual Interrupt Register */
-#define IC_CLR_INTR 0x40
-#define CLR_INTR (1 << 0)
-
-/* Clear RX_UNDER Interrupt Register */
-#define IC_CLR_RX_UNDER 0x44
-#define CLR_RX_UNDER (1 << 0)
-
-/* Clear RX_OVER Interrupt Register */
-#define IC_CLR_RX_OVER 0x48
-#define CLR_RX_OVER (1 << 0)
-
-/* Clear TX_OVER Interrupt Register */
-#define IC_CLR_TX_OVER 0x4c
-#define CLR_TX_OVER (1 << 0)
-
-#define IC_CLR_RD_REQ 0x50
-
-/* Clear TX_ABRT Interrupt Register */
-#define IC_CLR_TX_ABRT 0x54
-#define CLR_TX_ABRT (1 << 0)
-#define IC_CLR_RX_DONE 0x58
-
-/* Clear ACTIVITY Interrupt Register */
-#define IC_CLR_ACTIVITY 0x5c
-#define CLR_ACTIVITY (1 << 0)
-
-/* Clear STOP_DET Interrupt Register */
-#define IC_CLR_STOP_DET 0x60
-#define CLR_STOP_DET (1 << 0)
-
-/* Clear START_DET Interrupt Register */
-#define IC_CLR_START_DET 0x64
-#define CLR_START_DET (1 << 0)
-
-/* Clear GEN_CALL Interrupt Register */
-#define IC_CLR_GEN_CALL 0x68
-#define CLR_GEN_CALL (1 << 0)
-
-/* Enable Register */
-#define IC_ENABLE 0x6c
-#define ENABLE (1 << 0)
-
-/* Status Register */
-#define IC_STATUS 0x70 /* Read Only */
-#define STAT_SLV_ACTIVITY (1 << 6) /* Slave not in idle */
-#define STAT_MST_ACTIVITY (1 << 5) /* Master not in idle */
-#define STAT_RFF (1 << 4) /* RX FIFO Full */
-#define STAT_RFNE (1 << 3) /* RX FIFO Not Empty */
-#define STAT_TFE (1 << 2) /* TX FIFO Empty */
-#define STAT_TFNF (1 << 1) /* TX FIFO Not Full */
-#define STAT_ACTIVITY (1 << 0) /* Activity Status */
-
-/* Transmit FIFO Level Register */
-#define IC_TXFLR 0x74 /* Read Only */
-#define TXFLR (1 << 0) /* TX FIFO level */
-
-/* Receive FIFO Level Register */
-#define IC_RXFLR 0x78 /* Read Only */
-#define RXFLR (1 << 0) /* RX FIFO level */
-
-/* Transmit Abort Source Register */
-#define IC_TX_ABRT_SOURCE 0x80
-#define ABRT_SLVRD_INTX (1 << 15)
-#define ABRT_SLV_ARBLOST (1 << 14)
-#define ABRT_SLVFLUSH_TXFIFO (1 << 13)
-#define ARB_LOST (1 << 12)
-#define ABRT_MASTER_DIS (1 << 11)
-#define ABRT_10B_RD_NORSTRT (1 << 10)
-#define ABRT_SBYTE_NORSTRT (1 << 9)
-#define ABRT_HS_NORSTRT (1 << 8)
-#define ABRT_SBYTE_ACKDET (1 << 7)
-#define ABRT_HS_ACKDET (1 << 6)
-#define ABRT_GCALL_READ (1 << 5)
-#define ABRT_GCALL_NOACK (1 << 4)
-#define ABRT_TXDATA_NOACK (1 << 3)
-#define ABRT_10ADDR2_NOACK (1 << 2)
-#define ABRT_10ADDR1_NOACK (1 << 1)
-#define ABRT_7B_ADDR_NOACK (1 << 0)
-
-/* Enable Status Register */
-#define IC_ENABLE_STATUS 0x9c
-#define IC_EN (1 << 0) /* I2C in an enabled state */
-
-/* Component Parameter Register 1*/
-#define IC_COMP_PARAM_1 0xf4
-#define APB_DATA_WIDTH (0x3 << 0)
-
-/* added by xiaolin --begin */
-#define SS_MIN_SCL_HIGH 4000
-#define SS_MIN_SCL_LOW 4700
-#define FS_MIN_SCL_HIGH 600
-#define FS_MIN_SCL_LOW 1300
-#define HS_MIN_SCL_HIGH_100PF 60
-#define HS_MIN_SCL_LOW_100PF 120
-
-#define STANDARD 0
-#define FAST 1
-#define HIGH 2
-
-#define NUM_SPEEDS 3
-
-static int speed_mode[6] = {
- FAST,
- FAST,
- FAST,
- STANDARD,
- FAST,
- FAST
-};
-
-static int ctl_num = 6;
-module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
-MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)");
-
-/**
- * intel_mid_i2c_disable - Disable I2C controller
- * @adap: struct pointer to i2c_adapter
- *
- * Return Value:
- * 0 success
- * -EBUSY if device is busy
- * -ETIMEDOUT if i2c cannot be disabled within the given time
- *
- * I2C bus state should be checked prior to disabling the hardware. If bus is
- * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable
- * I2C controller.
- */
-static int intel_mid_i2c_disable(struct i2c_adapter *adap)
-{
- struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
- int err = 0;
- int count = 0;
- int ret1, ret2;
- static const u16 delay[NUM_SPEEDS] = {100, 25, 3};
-
- /* Set IC_ENABLE to 0 */
- writel(0, i2c->base + IC_ENABLE);
-
- /* Check if device is busy */
- dev_dbg(&adap->dev, "mrst i2c disable\n");
- while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1)
- || (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) {
- udelay(delay[i2c->speed]);
- writel(0, i2c->base + IC_ENABLE);
- dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n",
- count, i2c->speed);
- if (count++ > 10) {
- err = -ETIMEDOUT;
- break;
- }
- }
-
- /* Clear all interrupts */
- readl(i2c->base + IC_CLR_INTR);
- readl(i2c->base + IC_CLR_STOP_DET);
- readl(i2c->base + IC_CLR_START_DET);
- readl(i2c->base + IC_CLR_ACTIVITY);
- readl(i2c->base + IC_CLR_TX_ABRT);
- readl(i2c->base + IC_CLR_RX_OVER);
- readl(i2c->base + IC_CLR_RX_UNDER);
- readl(i2c->base + IC_CLR_TX_OVER);
- readl(i2c->base + IC_CLR_RX_DONE);
- readl(i2c->base + IC_CLR_GEN_CALL);
-
- /* Disable all interupts */
- writel(0x0000, i2c->base + IC_INTR_MASK);
-
- return err;
-}
-
-/**
- * intel_mid_i2c_hwinit - Initialize the I2C hardware registers
- * @dev: pci device struct pointer
- *
- * This function will be called in intel_mid_i2c_probe() before device
- * registration.
- *
- * Return Values:
- * 0 success
- * -EBUSY i2c cannot be disabled
- * -ETIMEDOUT i2c cannot be disabled
- * -EFAULT If APB data width is not 32-bit wide
- *
- * I2C should be disabled prior to other register operation. If failed, an
- * errno is returned. Mask and Clear all interrpts, this should be done at
- * first. Set common registers which will not be modified during normal
- * transfers, including: control register, FIFO threshold and clock freq.
- * Check APB data width at last.
- */
-static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
-{
- int err;
-
- static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
- { 0x75, 0x15, 0x07 },
- { 0x04c, 0x10, 0x06 }
- };
- static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
- { 0x7C, 0x21, 0x0E },
- { 0x053, 0x19, 0x0F }
- };
-
- /* Disable i2c first */
- err = intel_mid_i2c_disable(&i2c->adap);
- if (err)
- return err;
-
- /*
- * Setup clock frequency and speed mode
- * Enable restart condition,
- * enable master FSM, disable slave FSM,
- * use target address when initiating transfer
- */
-
- writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN,
- i2c->base + IC_CON);
- writel(hcnt[i2c->platform][i2c->speed],
- i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3)));
- writel(lcnt[i2c->platform][i2c->speed],
- i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3)));
-
- /* Set tranmit & receive FIFO threshold to zero */
- writel(0x0, i2c->base + IC_RX_TL);
- writel(0x0, i2c->base + IC_TX_TL);
-
- return 0;
-}
-
-/**
- * intel_mid_i2c_func - Return the supported three I2C operations.
- * @adapter: i2c_adapter struct pointer
- */
-static u32 intel_mid_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
-}
-
-/**
- * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages
- * are equal.
- * @p1: first i2c_msg
- * @p2: second i2c_msg
- *
- * Return Values:
- * 0 if addresses are equal
- * 1 if not equal
- *
- * Within a single transfer, the I2C client may need to send its address more
- * than once. So a check if the addresses match is needed.
- */
-static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
- const struct i2c_msg *p2)
-{
- if (p1->addr != p2->addr)
- return 1;
- if ((p1->flags ^ p2->flags) & I2C_M_TEN)
- return 1;
- return 0;
-}
-
-/**
- * intel_mid_i2c_abort - To handle transfer abortions and print error messages.
- * @adap: i2c_adapter struct pointer
- *
- * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
- * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occurred simutaneously, so we simply use the
- * register value directly.
- *
- * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
- * a few extra steps)
- */
-static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
-{
- /* Read about source register */
- int abort = i2c->abort;
- struct i2c_adapter *adap = &i2c->adap;
-
- /* Single transfer error check:
- * According to databook, TX/RX FIFOs would be flushed when
- * the abort interrupt occurred.
- */
- if (abort & ABRT_MASTER_DIS)
- dev_err(&adap->dev,
- "initiate master operation with master mode disabled.\n");
- if (abort & ABRT_10B_RD_NORSTRT)
- dev_err(&adap->dev,
- "RESTART disabled and master sent READ cmd in 10-bit addressing.\n");
-
- if (abort & ABRT_SBYTE_NORSTRT) {
- dev_err(&adap->dev,
- "RESTART disabled and user is trying to send START byte.\n");
- writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE);
- writel(RESTART, i2c->base + IC_CON);
- writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR);
- }
-
- if (abort & ABRT_SBYTE_ACKDET)
- dev_err(&adap->dev,
- "START byte was not acknowledged.\n");
- if (abort & ABRT_TXDATA_NOACK)
- dev_dbg(&adap->dev,
- "No acknowledgement received from slave.\n");
- if (abort & ABRT_10ADDR2_NOACK)
- dev_dbg(&adap->dev,
- "The 2nd address byte of the 10-bit address was not acknowledged.\n");
- if (abort & ABRT_10ADDR1_NOACK)
- dev_dbg(&adap->dev,
- "The 1st address byte of 10-bit address was not acknowledged.\n");
- if (abort & ABRT_7B_ADDR_NOACK)
- dev_dbg(&adap->dev,
- "I2C slave device not acknowledged.\n");
-
- /* Clear TX_ABRT bit */
- readl(i2c->base + IC_CLR_TX_ABRT);
- i2c->status = STATUS_XFER_ABORT;
-}
-
-/**
- * xfer_read - Internal function to implement master read transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0 if the read transfer succeeds
- * -ETIMEDOUT if cannot read the "raw" interrupt register
- * -EINVAL if a transfer abort occurred
- *
- * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "read" operation will be performed if an RX_FULL
- * interrupt occurred.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
-{
- struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
- int i = length;
- int err;
-
- if (length >= 256) {
- dev_err(&adap->dev,
- "I2C FIFO cannot support larger than 256 bytes\n");
- return -EMSGSIZE;
- }
-
- INIT_COMPLETION(i2c->complete);
-
- readl(i2c->base + IC_CLR_INTR);
- writel(0x0044, i2c->base + IC_INTR_MASK);
-
- i2c->status = STATUS_READ_START;
-
- while (i--)
- writel(IC_RD, i2c->base + IC_DATA_CMD);
-
- i2c->status = STATUS_READ_START;
- err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
- if (!err) {
- dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
- intel_mid_i2c_hwinit(i2c);
- return -ETIMEDOUT;
- }
- if (i2c->status == STATUS_READ_SUCCESS)
- return 0;
- else
- return -EIO;
-}
-
-/**
- * xfer_write - Internal function to implement master write transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0 if the read transfer succeeds
- * -ETIMEDOUT if we cannot read the "raw" interrupt register
- * -EINVAL if a transfer abort occurred
- *
- * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "write" operation will be performed when the
- * RX_FULL interrupt signal occurs.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_write(struct i2c_adapter *adap,
- unsigned char *buf, int length)
-{
- struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
- int i, err;
-
- if (length >= 256) {
- dev_err(&adap->dev,
- "I2C FIFO cannot support larger than 256 bytes\n");
- return -EMSGSIZE;
- }
-
- INIT_COMPLETION(i2c->complete);
-
- readl(i2c->base + IC_CLR_INTR);
- writel(0x0050, i2c->base + IC_INTR_MASK);
-
- i2c->status = STATUS_WRITE_START;
- for (i = 0; i < length; i++)
- writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD);
-
- i2c->status = STATUS_WRITE_START;
- err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
- if (!err) {
- dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
- intel_mid_i2c_hwinit(i2c);
- return -ETIMEDOUT;
- } else {
- if (i2c->status == STATUS_WRITE_SUCCESS)
- return 0;
- else
- return -EIO;
- }
-}
-
-static int intel_mid_i2c_setup(struct i2c_adapter *adap, struct i2c_msg *pmsg)
-{
- struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
- int err;
- u32 reg;
- u32 bit_mask;
- u32 mode;
-
- /* Disable device first */
- err = intel_mid_i2c_disable(adap);
- if (err) {
- dev_err(&adap->dev,
- "Cannot disable i2c controller, timeout\n");
- return err;
- }
-
- mode = (1 + i2c->speed) << 1;
- /* set the speed mode */
- reg = readl(i2c->base + IC_CON);
- if ((reg & 0x06) != mode) {
- dev_dbg(&adap->dev, "set mode %d\n", i2c->speed);
- writel((reg & ~0x6) | mode, i2c->base + IC_CON);
- }
-
- reg = readl(i2c->base + IC_CON);
- /* use 7-bit addressing */
- if (pmsg->flags & I2C_M_TEN) {
- if ((reg & ADDR_10BIT) != ADDR_10BIT) {
- dev_dbg(&adap->dev, "set i2c 10 bit address mode\n");
- writel(reg | ADDR_10BIT, i2c->base + IC_CON);
- }
- } else {
- if ((reg & ADDR_10BIT) != 0x0) {
- dev_dbg(&adap->dev, "set i2c 7 bit address mode\n");
- writel(reg & ~ADDR_10BIT, i2c->base + IC_CON);
- }
- }
- /* enable restart conditions */
- reg = readl(i2c->base + IC_CON);
- if ((reg & RESTART) != RESTART) {
- dev_dbg(&adap->dev, "enable restart conditions\n");
- writel(reg | RESTART, i2c->base + IC_CON);
- }
-
- /* enable master FSM */
- reg = readl(i2c->base + IC_CON);
- dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
- writel(reg | MASTER_EN, i2c->base + IC_CON);
- if ((reg & SLV_DIS) != SLV_DIS) {
- dev_dbg(&adap->dev, "enable master FSM\n");
- writel(reg | SLV_DIS, i2c->base + IC_CON);
- dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
- }
-
- /* use target address when initiating transfer */
- reg = readl(i2c->base + IC_TAR);
- bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START;
-
- if ((reg & bit_mask) != 0x0) {
- dev_dbg(&adap->dev,
- "WR: use target address when intiating transfer, i2c_tx_target\n");
- writel(reg & ~bit_mask, i2c->base + IC_TAR);
- }
-
- /* set target address to the I2C slave address */
- dev_dbg(&adap->dev,
- "set target address to the I2C slave address, addr is %x\n",
- pmsg->addr);
- writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0),
- i2c->base + IC_TAR);
-
- /* Enable I2C controller */
- writel(ENABLE, i2c->base + IC_ENABLE);
-
- return 0;
-}
-
-/**
- * intel_mid_i2c_xfer - Main master transfer routine.
- * @adap: i2c_adapter struct pointer
- * @pmsg: i2c_msg struct pointer
- * @num: number of i2c_msg
- *
- * Return Values:
- * + number of messages transferred
- * -ETIMEDOUT If cannot disable I2C controller or read IC_STATUS
- * -EINVAL If the address in i2c_msg is invalid
- *
- * This function will be registered in i2c-core and exposed to external
- * I2C clients.
- * 1. Disable I2C controller
- * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT
- * 3. Check if address in i2c_msg is valid
- * 4. Enable I2C controller
- * 5. Perform real transfer (call xfer_read or xfer_write)
- * 6. Wait until the current transfer is finished (check bus state)
- * 7. Mask and clear all interrupts
- */
-static int intel_mid_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg *pmsg,
- int num)
-{
- struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
- int i, err = 0;
-
- /* if number of messages equal 0*/
- if (num == 0)
- return 0;
-
- pm_runtime_get(i2c->dev);
-
- mutex_lock(&i2c->lock);
- dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num);
- dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr);
-
-
- if (i2c->status != STATUS_IDLE) {
- dev_err(&adap->dev, "Adapter %d in transfer/standby\n",
- adap->nr);
- mutex_unlock(&i2c->lock);
- pm_runtime_put(i2c->dev);
- return -1;
- }
-
-
- for (i = 1; i < num; i++) {
- /* Message address equal? */
- if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) {
- dev_err(&adap->dev, "Invalid address in msg[%d]\n", i);
- mutex_unlock(&i2c->lock);
- pm_runtime_put(i2c->dev);
- return -EINVAL;
- }
- }
-
- if (intel_mid_i2c_setup(adap, pmsg)) {
- mutex_unlock(&i2c->lock);
- pm_runtime_put(i2c->dev);
- return -EINVAL;
- }
-
- for (i = 0; i < num; i++) {
- i2c->msg = pmsg;
- i2c->status = STATUS_IDLE;
- /* Read or Write */
- if (pmsg->flags & I2C_M_RD) {
- dev_dbg(&adap->dev, "I2C_M_RD\n");
- err = xfer_read(adap, pmsg->buf, pmsg->len);
- } else {
- dev_dbg(&adap->dev, "I2C_M_WR\n");
- err = xfer_write(adap, pmsg->buf, pmsg->len);
- }
- if (err < 0)
- break;
- dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i);
- pmsg++; /* next message */
- }
-
- /* Mask interrupts */
- writel(0x0000, i2c->base + IC_INTR_MASK);
- /* Clear all interrupts */
- readl(i2c->base + IC_CLR_INTR);
-
- i2c->status = STATUS_IDLE;
- mutex_unlock(&i2c->lock);
- pm_runtime_put(i2c->dev);
-
- return err;
-}
-
-static int intel_mid_i2c_runtime_suspend(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
- struct i2c_adapter *adap = to_i2c_adapter(dev);
- int err;
-
- if (i2c->status != STATUS_IDLE)
- return -1;
-
- intel_mid_i2c_disable(adap);
-
- err = pci_save_state(pdev);
- if (err) {
- dev_err(dev, "pci_save_state failed\n");
- return err;
- }
-
- err = pci_set_power_state(pdev, PCI_D3hot);
- if (err) {
- dev_err(dev, "pci_set_power_state failed\n");
- return err;
- }
- i2c->status = STATUS_STANDBY;
-
- return 0;
-}
-
-static int intel_mid_i2c_runtime_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
- int err;
-
- if (i2c->status != STATUS_STANDBY)
- return 0;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- err = pci_enable_device(pdev);
- if (err) {
- dev_err(dev, "pci_enable_device failed\n");
- return err;
- }
-
- i2c->status = STATUS_IDLE;
-
- intel_mid_i2c_hwinit(i2c);
- return err;
-}
-
-static void i2c_isr_read(struct intel_mid_i2c_private *i2c)
-{
- struct i2c_msg *msg = i2c->msg;
- int rx_num;
- u32 len;
- u8 *buf;
-
- if (!(msg->flags & I2C_M_RD))
- return;
-
- if (i2c->status != STATUS_READ_IN_PROGRESS) {
- len = msg->len;
- buf = msg->buf;
- } else {
- len = i2c->rx_buf_len;
- buf = i2c->rx_buf;
- }
-
- rx_num = readl(i2c->base + IC_RXFLR);
-
- for (; len > 0 && rx_num > 0; len--, rx_num--)
- *buf++ = readl(i2c->base + IC_DATA_CMD);
-
- if (len > 0) {
- i2c->status = STATUS_READ_IN_PROGRESS;
- i2c->rx_buf_len = len;
- i2c->rx_buf = buf;
- } else
- i2c->status = STATUS_READ_SUCCESS;
-
- return;
-}
-
-static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev)
-{
- struct intel_mid_i2c_private *i2c = dev;
- u32 stat = readl(i2c->base + IC_INTR_STAT);
-
- if (!stat)
- return IRQ_NONE;
-
- dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat);
- stat &= 0x54;
-
- if (i2c->status != STATUS_WRITE_START &&
- i2c->status != STATUS_READ_START &&
- i2c->status != STATUS_READ_IN_PROGRESS)
- goto err;
-
- if (stat & TX_ABRT)
- i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE);
-
- readl(i2c->base + IC_CLR_INTR);
-
- if (stat & TX_ABRT) {
- intel_mid_i2c_abort(i2c);
- goto exit;
- }
-
- if (stat & RX_FULL) {
- i2c_isr_read(i2c);
- goto exit;
- }
-
- if (stat & TX_EMPTY) {
- if (readl(i2c->base + IC_STATUS) & 0x4)
- i2c->status = STATUS_WRITE_SUCCESS;
- }
-
-exit:
- if (i2c->status == STATUS_READ_SUCCESS ||
- i2c->status == STATUS_WRITE_SUCCESS ||
- i2c->status == STATUS_XFER_ABORT) {
- /* Clear all interrupts */
- readl(i2c->base + IC_CLR_INTR);
- /* Mask interrupts */
- writel(0, i2c->base + IC_INTR_MASK);
- complete(&i2c->complete);
- }
-err:
- return IRQ_HANDLED;
-}
-
-static struct i2c_algorithm intel_mid_i2c_algorithm = {
- .master_xfer = intel_mid_i2c_xfer,
- .functionality = intel_mid_i2c_func,
-};
-
-
-static const struct dev_pm_ops intel_mid_i2c_pm_ops = {
- .runtime_suspend = intel_mid_i2c_runtime_suspend,
- .runtime_resume = intel_mid_i2c_runtime_resume,
-};
-
-/**
- * intel_mid_i2c_probe - I2C controller initialization routine
- * @dev: pci device
- * @id: device id
- *
- * Return Values:
- * 0 success
- * -ENODEV If cannot allocate pci resource
- * -ENOMEM If the register base remapping failed, or
- * if kzalloc failed
- *
- * Initialization steps:
- * 1. Request for PCI resource
- * 2. Remap the start address of PCI resource to register base
- * 3. Request for device memory region
- * 4. Fill in the struct members of intel_mid_i2c_private
- * 5. Call intel_mid_i2c_hwinit() for hardware initialization
- * 6. Register I2C adapter in i2c-core
- */
-static int intel_mid_i2c_probe(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- struct intel_mid_i2c_private *mrst;
- unsigned long start, len;
- int err, busnum;
- void __iomem *base = NULL;
-
- dev_dbg(&dev->dev, "Get into probe function for I2C\n");
- err = pci_enable_device(dev);
- if (err) {
- dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n",
- err);
- goto exit;
- }
-
- /* Determine the address of the I2C area */
- start = pci_resource_start(dev, 0);
- len = pci_resource_len(dev, 0);
- if (!start || len == 0) {
- dev_err(&dev->dev, "base address not set\n");
- err = -ENODEV;
- goto exit;
- }
- dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n",
- PLATFORM, start, len);
-
- err = pci_request_region(dev, 0, DRIVER_NAME);
- if (err) {
- dev_err(&dev->dev, "failed to request I2C region "
- "0x%lx-0x%lx\n", start,
- (unsigned long)pci_resource_end(dev, 0));
- goto exit;
- }
-
- base = ioremap_nocache(start, len);
- if (!base) {
- dev_err(&dev->dev, "I/O memory remapping failed\n");
- err = -ENOMEM;
- goto fail0;
- }
-
- /* Allocate the per-device data structure, intel_mid_i2c_private */
- mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL);
- if (mrst == NULL) {
- dev_err(&dev->dev, "can't allocate interface\n");
- err = -ENOMEM;
- goto fail1;
- }
-
- /* Initialize struct members */
- snprintf(mrst->adap.name, sizeof(mrst->adap.name),
- "Intel MID I2C at %lx", start);
- mrst->adap.owner = THIS_MODULE;
- mrst->adap.algo = &intel_mid_i2c_algorithm;
- mrst->adap.dev.parent = &dev->dev;
- mrst->dev = &dev->dev;
- mrst->base = base;
- mrst->speed = STANDARD;
- mrst->abort = 0;
- mrst->rx_buf_len = 0;
- mrst->status = STATUS_IDLE;
-
- pci_set_drvdata(dev, mrst);
- i2c_set_adapdata(&mrst->adap, mrst);
-
- mrst->adap.nr = busnum = id->driver_data;
- if (dev->device <= 0x0804)
- mrst->platform = MOORESTOWN;
- else
- mrst->platform = MEDFIELD;
-
- dev_dbg(&dev->dev, "I2C%d\n", busnum);
-
- if (ctl_num > busnum) {
- if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS)
- dev_warn(&dev->dev, "invalid speed %d ignored.\n",
- speed_mode[busnum]);
- else
- mrst->speed = speed_mode[busnum];
- }
-
- /* Initialize i2c controller */
- err = intel_mid_i2c_hwinit(mrst);
- if (err < 0) {
- dev_err(&dev->dev, "I2C interface initialization failed\n");
- goto fail2;
- }
-
- mutex_init(&mrst->lock);
- init_completion(&mrst->complete);
-
- /* Clear all interrupts */
- readl(mrst->base + IC_CLR_INTR);
- writel(0x0000, mrst->base + IC_INTR_MASK);
-
- err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED,
- mrst->adap.name, mrst);
- if (err) {
- dev_err(&dev->dev, "Failed to request IRQ for I2C controller: "
- "%s", mrst->adap.name);
- goto fail2;
- }
-
- /* Adapter registration */
- err = i2c_add_numbered_adapter(&mrst->adap);
- if (err) {
- dev_err(&dev->dev, "Adapter %s registration failed\n",
- mrst->adap.name);
- goto fail3;
- }
-
- dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n",
- (mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield",
- busnum);
-
- pm_runtime_enable(&dev->dev);
- return 0;
-
-fail3:
- free_irq(dev->irq, mrst);
-fail2:
- kfree(mrst);
-fail1:
- iounmap(base);
-fail0:
- pci_release_region(dev, 0);
-exit:
- return err;
-}
-
-static void intel_mid_i2c_remove(struct pci_dev *dev)
-{
- struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev);
- intel_mid_i2c_disable(&mrst->adap);
- i2c_del_adapter(&mrst->adap);
-
- free_irq(dev->irq, mrst);
- iounmap(mrst->base);
- kfree(mrst);
- pci_release_region(dev, 0);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(intel_mid_i2c_ids) = {
- /* Moorestown */
- { PCI_VDEVICE(INTEL, 0x0802), 0 },
- { PCI_VDEVICE(INTEL, 0x0803), 1 },
- { PCI_VDEVICE(INTEL, 0x0804), 2 },
- /* Medfield */
- { PCI_VDEVICE(INTEL, 0x0817), 3,},
- { PCI_VDEVICE(INTEL, 0x0818), 4 },
- { PCI_VDEVICE(INTEL, 0x0819), 5 },
- { PCI_VDEVICE(INTEL, 0x082C), 0 },
- { PCI_VDEVICE(INTEL, 0x082D), 1 },
- { PCI_VDEVICE(INTEL, 0x082E), 2 },
- { 0,}
-};
-MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids);
-
-static struct pci_driver intel_mid_i2c_driver = {
- .name = DRIVER_NAME,
- .id_table = intel_mid_i2c_ids,
- .probe = intel_mid_i2c_probe,
- .remove = intel_mid_i2c_remove,
-};
-
-module_pci_driver(intel_mid_i2c_driver);
-
-MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>");
-MODULE_DESCRIPTION("I2C driver for Moorestown Platform");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(VERSION);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index bc993331c695..dd24aa0424a9 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -176,7 +176,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
interrupted = wait_event_interruptible_timeout (
iop3xx_adap->waitq,
(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
- 1 * HZ;
+ 1 * HZ
);
if ((rc = iop3xx_i2c_error(sr)) < 0) {
*status = sr;
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
new file mode 100644
index 000000000000..ccec916bc3eb
--- /dev/null
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -0,0 +1,410 @@
+/*
+ * I2C bus driver for Kontron COM modules
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * The driver is based on the i2c-ocores driver by Peter Korsgaard.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_I2C_PRELOW 0x0b
+#define KEMPLD_I2C_PREHIGH 0x0c
+#define KEMPLD_I2C_DATA 0x0e
+
+#define KEMPLD_I2C_CTRL 0x0d
+#define I2C_CTRL_IEN 0x40
+#define I2C_CTRL_EN 0x80
+
+#define KEMPLD_I2C_STAT 0x0f
+#define I2C_STAT_IF 0x01
+#define I2C_STAT_TIP 0x02
+#define I2C_STAT_ARBLOST 0x20
+#define I2C_STAT_BUSY 0x40
+#define I2C_STAT_NACK 0x80
+
+#define KEMPLD_I2C_CMD 0x0f
+#define I2C_CMD_START 0x91
+#define I2C_CMD_STOP 0x41
+#define I2C_CMD_READ 0x21
+#define I2C_CMD_WRITE 0x11
+#define I2C_CMD_READ_ACK 0x21
+#define I2C_CMD_READ_NACK 0x29
+#define I2C_CMD_IACK 0x01
+
+#define KEMPLD_I2C_FREQ_MAX 2700 /* 2.7 mHz */
+#define KEMPLD_I2C_FREQ_STD 100 /* 100 kHz */
+
+enum {
+ STATE_DONE = 0,
+ STATE_INIT,
+ STATE_ADDR,
+ STATE_ADDR10,
+ STATE_START,
+ STATE_WRITE,
+ STATE_READ,
+ STATE_ERROR,
+};
+
+struct kempld_i2c_data {
+ struct device *dev;
+ struct kempld_device_data *pld;
+ struct i2c_adapter adap;
+ struct i2c_msg *msg;
+ int pos;
+ int nmsgs;
+ int state;
+ bool was_active;
+};
+
+static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD;
+module_param(bus_frequency, uint, 0);
+MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default="
+ __MODULE_STRING(KEMPLD_I2C_FREQ_STD)")");
+
+static int i2c_bus = -1;
+module_param(i2c_bus, int, 0);
+MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)");
+
+static bool i2c_gpio_mux;
+module_param(i2c_gpio_mux, bool, 0);
+MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)");
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static int kempld_i2c_process(struct kempld_i2c_data *i2c)
+{
+ struct kempld_device_data *pld = i2c->pld;
+ u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+ struct i2c_msg *msg = i2c->msg;
+ u8 addr;
+
+ /* Ready? */
+ if (stat & I2C_STAT_TIP)
+ return -EBUSY;
+
+ if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+ /* Stop has been sent */
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+ if (i2c->state == STATE_ERROR)
+ return -EIO;
+ return 0;
+ }
+
+ /* Error? */
+ if (stat & I2C_STAT_ARBLOST) {
+ i2c->state = STATE_ERROR;
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+ return -EAGAIN;
+ }
+
+ if (i2c->state == STATE_INIT) {
+ if (stat & I2C_STAT_BUSY)
+ return -EBUSY;
+
+ i2c->state = STATE_ADDR;
+ }
+
+ if (i2c->state == STATE_ADDR) {
+ /* 10 bit address? */
+ if (i2c->msg->flags & I2C_M_TEN) {
+ addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+ i2c->state = STATE_ADDR10;
+ } else {
+ addr = (i2c->msg->addr << 1);
+ i2c->state = STATE_START;
+ }
+
+ /* Set read bit if necessary */
+ addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
+
+ kempld_write8(pld, KEMPLD_I2C_DATA, addr);
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
+
+ return 0;
+ }
+
+ /* Second part of 10 bit addressing */
+ if (i2c->state == STATE_ADDR10) {
+ kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff);
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+
+ i2c->state = STATE_START;
+ return 0;
+ }
+
+ if (i2c->state == STATE_START || i2c->state == STATE_WRITE) {
+ i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+ if (stat & I2C_STAT_NACK) {
+ i2c->state = STATE_ERROR;
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+ return -ENXIO;
+ }
+ } else {
+ msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA);
+ }
+
+ if (i2c->pos >= msg->len) {
+ i2c->nmsgs--;
+ i2c->msg++;
+ i2c->pos = 0;
+ msg = i2c->msg;
+
+ if (i2c->nmsgs) {
+ if (!(msg->flags & I2C_M_NOSTART)) {
+ i2c->state = STATE_ADDR;
+ return 0;
+ } else {
+ i2c->state = (msg->flags & I2C_M_RD)
+ ? STATE_READ : STATE_WRITE;
+ }
+ } else {
+ i2c->state = STATE_DONE;
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+ return 0;
+ }
+ }
+
+ if (i2c->state == STATE_READ) {
+ kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ?
+ I2C_CMD_READ_NACK : I2C_CMD_READ_ACK);
+ } else {
+ kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]);
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+ }
+
+ return 0;
+}
+
+static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+ int num)
+{
+ struct kempld_i2c_data *i2c = i2c_get_adapdata(adap);
+ struct kempld_device_data *pld = i2c->pld;
+ unsigned long timeout = jiffies + HZ;
+ int ret;
+
+ i2c->msg = msgs;
+ i2c->pos = 0;
+ i2c->nmsgs = num;
+ i2c->state = STATE_INIT;
+
+ /* Handle the transfer */
+ while (time_before(jiffies, timeout)) {
+ kempld_get_mutex(pld);
+ ret = kempld_i2c_process(i2c);
+ kempld_release_mutex(pld);
+
+ if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR)
+ return (i2c->state == STATE_DONE) ? num : ret;
+
+ if (ret == 0)
+ timeout = jiffies + HZ;
+
+ usleep_range(5, 15);
+ }
+
+ i2c->state = STATE_ERROR;
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static void kempld_i2c_device_init(struct kempld_i2c_data *i2c)
+{
+ struct kempld_device_data *pld = i2c->pld;
+ u16 prescale_corr;
+ long prescale;
+ u8 ctrl;
+ u8 stat;
+ u8 cfg;
+
+ /* Make sure the device is disabled */
+ ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+ ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN);
+ kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+ if (bus_frequency > KEMPLD_I2C_FREQ_MAX)
+ bus_frequency = KEMPLD_I2C_FREQ_MAX;
+
+ if (pld->info.spec_major == 1)
+ prescale = pld->pld_clock / bus_frequency * 5 - 1000;
+ else
+ prescale = pld->pld_clock / bus_frequency * 4 - 3000;
+
+ if (prescale < 0)
+ prescale = 0;
+
+ /* Round to the best matching value */
+ prescale_corr = prescale / 1000;
+ if (prescale % 1000 >= 500)
+ prescale_corr++;
+
+ kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff);
+ kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8);
+
+ /* Activate I2C bus output on GPIO pins */
+ cfg = kempld_read8(pld, KEMPLD_CFG);
+ if (i2c_gpio_mux)
+ cfg |= KEMPLD_CFG_GPIO_I2C_MUX;
+ else
+ cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX;
+ kempld_write8(pld, KEMPLD_CFG, cfg);
+
+ /* Enable the device */
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+ ctrl |= I2C_CTRL_EN;
+ kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+ stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+ if (stat & I2C_STAT_BUSY)
+ kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+}
+
+static u32 kempld_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm kempld_i2c_algorithm = {
+ .master_xfer = kempld_i2c_xfer,
+ .functionality = kempld_i2c_func,
+};
+
+static struct i2c_adapter kempld_i2c_adapter = {
+ .owner = THIS_MODULE,
+ .name = "i2c-kempld",
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &kempld_i2c_algorithm,
+};
+
+static int kempld_i2c_probe(struct platform_device *pdev)
+{
+ struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent);
+ struct kempld_i2c_data *i2c;
+ int ret;
+ u8 ctrl;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ i2c->pld = pld;
+ i2c->dev = &pdev->dev;
+ i2c->adap = kempld_i2c_adapter;
+ i2c->adap.dev.parent = i2c->dev;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ platform_set_drvdata(pdev, i2c);
+
+ kempld_get_mutex(pld);
+ ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+
+ if (ctrl & I2C_CTRL_EN)
+ i2c->was_active = true;
+
+ kempld_i2c_device_init(i2c);
+ kempld_release_mutex(pld);
+
+ /* Add I2C adapter to I2C tree */
+ if (i2c_bus >= -1)
+ i2c->adap.nr = i2c_bus;
+ ret = i2c_add_numbered_adapter(&i2c->adap);
+ if (ret)
+ return ret;
+
+ dev_info(i2c->dev, "I2C bus initialized at %dkHz\n",
+ bus_frequency);
+
+ return 0;
+}
+
+static int kempld_i2c_remove(struct platform_device *pdev)
+{
+ struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+ struct kempld_device_data *pld = i2c->pld;
+ u8 ctrl;
+
+ kempld_get_mutex(pld);
+ /*
+ * Disable I2C logic if it was not activated before the
+ * driver loaded
+ */
+ if (!i2c->was_active) {
+ ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+ ctrl &= ~I2C_CTRL_EN;
+ kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+ }
+ kempld_release_mutex(pld);
+
+ i2c_del_adapter(&i2c->adap);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int kempld_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+ struct kempld_device_data *pld = i2c->pld;
+ u8 ctrl;
+
+ kempld_get_mutex(pld);
+ ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+ ctrl &= ~I2C_CTRL_EN;
+ kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+ kempld_release_mutex(pld);
+
+ return 0;
+}
+
+static int kempld_i2c_resume(struct platform_device *pdev)
+{
+ struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+ struct kempld_device_data *pld = i2c->pld;
+
+ kempld_get_mutex(pld);
+ kempld_i2c_device_init(i2c);
+ kempld_release_mutex(pld);
+
+ return 0;
+}
+#else
+#define kempld_i2c_suspend NULL
+#define kempld_i2c_resume NULL
+#endif
+
+static struct platform_driver kempld_i2c_driver = {
+ .driver = {
+ .name = "kempld-i2c",
+ .owner = THIS_MODULE,
+ },
+ .probe = kempld_i2c_probe,
+ .remove = kempld_i2c_remove,
+ .suspend = kempld_i2c_suspend,
+ .resume = kempld_i2c_resume,
+};
+
+module_platform_driver(kempld_i2c_driver);
+
+MODULE_DESCRIPTION("KEM PLD I2C Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kempld_i2c");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 5e705ee02f4a..7607dc061918 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -679,7 +679,7 @@ static int fsl_i2c_probe(struct platform_device *op)
}
dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
- dev_set_drvdata(&op->dev, i2c);
+ platform_set_drvdata(op, i2c);
i2c->adap = mpc_ops;
i2c_set_adapdata(&i2c->adap, i2c);
@@ -707,7 +707,7 @@ static int fsl_i2c_probe(struct platform_device *op)
static int fsl_i2c_remove(struct platform_device *op)
{
- struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
+ struct mpc_i2c *i2c = platform_get_drvdata(op);
i2c_del_adapter(&i2c->adap);
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 1a3abd6a0bfc..b1f42bf40963 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -19,19 +19,15 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_i2c.h>
#include <linux/clk.h>
#include <linux/err.h>
-/* Register defines */
-#define MV64XXX_I2C_REG_SLAVE_ADDR 0x00
-#define MV64XXX_I2C_REG_DATA 0x04
-#define MV64XXX_I2C_REG_CONTROL 0x08
-#define MV64XXX_I2C_REG_STATUS 0x0c
-#define MV64XXX_I2C_REG_BAUD 0x0c
-#define MV64XXX_I2C_REG_EXT_SLAVE_ADDR 0x10
-#define MV64XXX_I2C_REG_SOFT_RESET 0x1c
+#define MV64XXX_I2C_ADDR_ADDR(val) ((val & 0x7f) << 1)
+#define MV64XXX_I2C_BAUD_DIV_N(val) (val & 0x7)
+#define MV64XXX_I2C_BAUD_DIV_M(val) ((val & 0xf) << 3)
#define MV64XXX_I2C_REG_CONTROL_ACK 0x00000004
#define MV64XXX_I2C_REG_CONTROL_IFLG 0x00000008
@@ -85,15 +81,26 @@ enum {
MV64XXX_I2C_ACTION_SEND_STOP,
};
+struct mv64xxx_i2c_regs {
+ u8 addr;
+ u8 ext_addr;
+ u8 data;
+ u8 control;
+ u8 status;
+ u8 clock;
+ u8 soft_reset;
+};
+
struct mv64xxx_i2c_data {
+ struct i2c_msg *msgs;
+ int num_msgs;
int irq;
u32 state;
u32 action;
u32 aborting;
u32 cntl_bits;
void __iomem *reg_base;
- u32 reg_base_p;
- u32 reg_size;
+ struct mv64xxx_i2c_regs reg_offsets;
u32 addr1;
u32 addr2;
u32 bytes_left;
@@ -112,6 +119,52 @@ struct mv64xxx_i2c_data {
struct i2c_adapter adapter;
};
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
+ .addr = 0x00,
+ .ext_addr = 0x10,
+ .data = 0x04,
+ .control = 0x08,
+ .status = 0x0c,
+ .clock = 0x0c,
+ .soft_reset = 0x1c,
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
+ .addr = 0x00,
+ .ext_addr = 0x04,
+ .data = 0x08,
+ .control = 0x0c,
+ .status = 0x10,
+ .clock = 0x14,
+ .soft_reset = 0x18,
+};
+
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+ struct i2c_msg *msg)
+{
+ u32 dir = 0;
+
+ drv_data->msg = msg;
+ drv_data->byte_posn = 0;
+ drv_data->bytes_left = msg->len;
+ drv_data->aborting = 0;
+ drv_data->rc = 0;
+ drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
+ MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+ if (msg->flags & I2C_M_RD)
+ dir = 1;
+
+ if (msg->flags & I2C_M_TEN) {
+ drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+ drv_data->addr2 = (u32)msg->addr & 0xff;
+ } else {
+ drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
+ drv_data->addr2 = 0;
+ }
+}
+
/*
*****************************************************************************
*
@@ -124,13 +177,13 @@ struct mv64xxx_i2c_data {
static void
mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
{
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
- writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
- drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
- writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
+ writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
+ writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
+ drv_data->reg_base + drv_data->reg_offsets.clock);
+ writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
+ writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
drv_data->state = MV64XXX_I2C_STATE_IDLE;
}
@@ -170,7 +223,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
if ((drv_data->bytes_left == 0)
|| (drv_data->aborting
&& (drv_data->byte_posn != 0))) {
- if (drv_data->send_stop) {
+ if (drv_data->send_stop || drv_data->aborting) {
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
drv_data->state = MV64XXX_I2C_STATE_IDLE;
} else {
@@ -227,7 +280,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
/* Doesn't seem to be a device at other end */
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
drv_data->state = MV64XXX_I2C_STATE_IDLE;
- drv_data->rc = -ENODEV;
+ drv_data->rc = -ENXIO;
break;
default:
@@ -247,58 +300,71 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
{
switch(drv_data->action) {
case MV64XXX_I2C_ACTION_SEND_RESTART:
+ /* We should only get here if we have further messages */
+ BUG_ON(drv_data->num_msgs == 0);
+
drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
- drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
- drv_data->block = 0;
- wake_up(&drv_data->waitq);
+ drv_data->reg_base + drv_data->reg_offsets.control);
+
+ drv_data->msgs++;
+ drv_data->num_msgs--;
+
+ /* Setup for the next message */
+ mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+
+ /*
+ * We're never at the start of the message here, and by this
+ * time it's already too late to do any protocol mangling.
+ * Thankfully, do not advertise support for that feature.
+ */
+ drv_data->send_stop = drv_data->num_msgs == 1;
break;
case MV64XXX_I2C_ACTION_CONTINUE:
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_SEND_START:
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
writel(drv_data->addr1,
- drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+ drv_data->reg_base + drv_data->reg_offsets.data);
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_SEND_ADDR_2:
writel(drv_data->addr2,
- drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+ drv_data->reg_base + drv_data->reg_offsets.data);
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_SEND_DATA:
writel(drv_data->msg->buf[drv_data->byte_posn++],
- drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+ drv_data->reg_base + drv_data->reg_offsets.data);
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_RCV_DATA:
drv_data->msg->buf[drv_data->byte_posn++] =
- readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+ readl(drv_data->reg_base + drv_data->reg_offsets.data);
writel(drv_data->cntl_bits,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
break;
case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
drv_data->msg->buf[drv_data->byte_posn++] =
- readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+ readl(drv_data->reg_base + drv_data->reg_offsets.data);
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
drv_data->block = 0;
wake_up(&drv_data->waitq);
break;
@@ -313,7 +379,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
case MV64XXX_I2C_ACTION_SEND_STOP:
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
- drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+ drv_data->reg_base + drv_data->reg_offsets.control);
drv_data->block = 0;
wake_up(&drv_data->waitq);
break;
@@ -329,9 +395,9 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
irqreturn_t rc = IRQ_NONE;
spin_lock_irqsave(&drv_data->lock, flags);
- while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) &
+ while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
MV64XXX_I2C_REG_CONTROL_IFLG) {
- status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS);
+ status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
mv64xxx_i2c_fsm(drv_data, status);
mv64xxx_i2c_do_action(drv_data);
rc = IRQ_HANDLED;
@@ -349,32 +415,6 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
*****************************************************************************
*/
static void
-mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
- struct i2c_msg *msg)
-{
- u32 dir = 0;
-
- drv_data->msg = msg;
- drv_data->byte_posn = 0;
- drv_data->bytes_left = msg->len;
- drv_data->aborting = 0;
- drv_data->rc = 0;
- drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
- MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
-
- if (msg->flags & I2C_M_RD)
- dir = 1;
-
- if (msg->flags & I2C_M_TEN) {
- drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
- drv_data->addr2 = (u32)msg->addr & 0xff;
- } else {
- drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
- drv_data->addr2 = 0;
- }
-}
-
-static void
mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
{
long time_left;
@@ -414,36 +454,15 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
static int
mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
- int is_first, int is_last)
+ int is_last)
{
unsigned long flags;
spin_lock_irqsave(&drv_data->lock, flags);
mv64xxx_i2c_prepare_for_io(drv_data, msg);
- if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */
- if (drv_data->msg->flags & I2C_M_RD) {
- /* No action to do, wait for slave to send a byte */
- drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
- drv_data->state =
- MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
- } else {
- drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
- drv_data->state =
- MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
- drv_data->bytes_left--;
- }
- } else {
- if (is_first) {
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- drv_data->state =
- MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
- } else {
- drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
- drv_data->state =
- MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
- }
- }
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
drv_data->send_stop = is_last;
drv_data->block = 1;
@@ -471,16 +490,20 @@ static int
mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
{
struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
- int i, rc;
+ int rc, ret = num;
- for (i = 0; i < num; i++) {
- rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i],
- i == 0, i + 1 == num);
- if (rc < 0)
- return rc;
- }
+ BUG_ON(drv_data->msgs != NULL);
+ drv_data->msgs = msgs;
+ drv_data->num_msgs = num;
+
+ rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
+ if (rc < 0)
+ ret = rc;
+
+ drv_data->num_msgs = 0;
+ drv_data->msgs = NULL;
- return num;
+ return ret;
}
static const struct i2c_algorithm mv64xxx_i2c_algo = {
@@ -495,39 +518,12 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
*
*****************************************************************************
*/
-static int
-mv64xxx_i2c_map_regs(struct platform_device *pd,
- struct mv64xxx_i2c_data *drv_data)
-{
- int size;
- struct resource *r = platform_get_resource(pd, IORESOURCE_MEM, 0);
-
- if (!r)
- return -ENODEV;
-
- size = resource_size(r);
-
- if (!request_mem_region(r->start, size, drv_data->adapter.name))
- return -EBUSY;
-
- drv_data->reg_base = ioremap(r->start, size);
- drv_data->reg_base_p = r->start;
- drv_data->reg_size = size;
-
- return 0;
-}
-
-static void
-mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
-{
- if (drv_data->reg_base) {
- iounmap(drv_data->reg_base);
- release_mem_region(drv_data->reg_base_p, drv_data->reg_size);
- }
-
- drv_data->reg_base = NULL;
- drv_data->reg_base_p = 0;
-}
+static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
+ { .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+ { .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+ {}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
#ifdef CONFIG_OF
static int
@@ -562,8 +558,10 @@ mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
- struct device_node *np)
+ struct device *dev)
{
+ const struct of_device_id *device;
+ struct device_node *np = dev->of_node;
u32 bus_freq, tclk;
int rc = 0;
@@ -580,7 +578,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
goto out;
}
tclk = clk_get_rate(drv_data->clk);
- of_property_read_u32(np, "clock-frequency", &bus_freq);
+
+ rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
+ if (rc)
+ bus_freq = 100000; /* 100kHz by default */
+
if (!mv64xxx_find_baud_factors(bus_freq, tclk,
&drv_data->freq_n, &drv_data->freq_m)) {
rc = -EINVAL;
@@ -592,6 +594,13 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
* So hard code the value to 1 second.
*/
drv_data->adapter.timeout = HZ;
+
+ device = of_match_device(mv64xxx_i2c_of_match_table, dev);
+ if (!device)
+ return -ENODEV;
+
+ memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+
out:
return rc;
#endif
@@ -599,7 +608,7 @@ out:
#else /* CONFIG_OF */
static int
mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
- struct device_node *np)
+ struct device *dev)
{
return -ENODEV;
}
@@ -610,19 +619,21 @@ mv64xxx_i2c_probe(struct platform_device *pd)
{
struct mv64xxx_i2c_data *drv_data;
struct mv64xxx_i2c_pdata *pdata = pd->dev.platform_data;
+ struct resource *r;
int rc;
if ((!pdata && !pd->dev.of_node))
return -ENODEV;
- drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
+ drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
+ GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
- if (mv64xxx_i2c_map_regs(pd, drv_data)) {
- rc = -ENODEV;
- goto exit_kfree;
- }
+ r = platform_get_resource(pd, IORESOURCE_MEM, 0);
+ drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+ if (IS_ERR(drv_data->reg_base))
+ return PTR_ERR(drv_data->reg_base);
strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
sizeof(drv_data->adapter.name));
@@ -632,7 +643,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
- drv_data->clk = clk_get(&pd->dev, NULL);
+ drv_data->clk = devm_clk_get(&pd->dev, NULL);
if (!IS_ERR(drv_data->clk)) {
clk_prepare(drv_data->clk);
clk_enable(drv_data->clk);
@@ -643,14 +654,15 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->freq_n = pdata->freq_n;
drv_data->irq = platform_get_irq(pd, 0);
drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+ memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
} else if (pd->dev.of_node) {
- rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
+ rc = mv64xxx_of_config(drv_data, &pd->dev);
if (rc)
- goto exit_unmap_regs;
+ goto exit_clk;
}
if (drv_data->irq < 0) {
rc = -ENXIO;
- goto exit_unmap_regs;
+ goto exit_clk;
}
drv_data->adapter.dev.parent = &pd->dev;
@@ -664,13 +676,13 @@ mv64xxx_i2c_probe(struct platform_device *pd)
mv64xxx_i2c_hw_init(drv_data);
- if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
- MV64XXX_I2C_CTLR_NAME, drv_data)) {
+ rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
+ MV64XXX_I2C_CTLR_NAME, drv_data);
+ if (rc) {
dev_err(&drv_data->adapter.dev,
- "mv64xxx: Can't register intr handler irq: %d\n",
- drv_data->irq);
- rc = -EINVAL;
- goto exit_unmap_regs;
+ "mv64xxx: Can't register intr handler irq%d: %d\n",
+ drv_data->irq, rc);
+ goto exit_clk;
} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
dev_err(&drv_data->adapter.dev,
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
@@ -681,9 +693,9 @@ mv64xxx_i2c_probe(struct platform_device *pd)
return 0;
- exit_free_irq:
- free_irq(drv_data->irq, drv_data);
- exit_unmap_regs:
+exit_free_irq:
+ free_irq(drv_data->irq, drv_data);
+exit_clk:
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
if (!IS_ERR(drv_data->clk)) {
@@ -691,9 +703,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
clk_unprepare(drv_data->clk);
}
#endif
- mv64xxx_i2c_unmap_regs(drv_data);
- exit_kfree:
- kfree(drv_data);
return rc;
}
@@ -704,7 +713,6 @@ mv64xxx_i2c_remove(struct platform_device *dev)
i2c_del_adapter(&drv_data->adapter);
free_irq(drv_data->irq, drv_data);
- mv64xxx_i2c_unmap_regs(drv_data);
#if defined(CONFIG_HAVE_CLK)
/* Not all platforms have a clk */
if (!IS_ERR(drv_data->clk)) {
@@ -712,17 +720,10 @@ mv64xxx_i2c_remove(struct platform_device *dev)
clk_unprepare(drv_data->clk);
}
#endif
- kfree(drv_data);
return 0;
}
-static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
- { .compatible = "marvell,mv64xxx-i2c", },
- {}
-};
-MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
-
static struct platform_driver mv64xxx_i2c_driver = {
.probe = mv64xxx_i2c_probe,
.remove = mv64xxx_i2c_remove,
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 2039f230482d..df8ff5aea5b5 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -24,7 +24,6 @@
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/io.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/stmp_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -638,15 +637,10 @@ static int mxs_i2c_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct mxs_i2c_dev *i2c;
struct i2c_adapter *adap;
- struct pinctrl *pinctrl;
struct resource *res;
resource_size_t res_size;
int err, irq;
- pinctrl = devm_pinctrl_get_select_default(dev);
- if (IS_ERR(pinctrl))
- return PTR_ERR(pinctrl);
-
i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index c7e3b0c1a1ca..512dfe609706 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/amba/bus.h>
-#include <linux/atomic.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -106,6 +105,16 @@
/* maximum threshold value */
#define MAX_I2C_FIFO_THRESHOLD 15
+/**
+ * struct i2c_vendor_data - per-vendor variations
+ * @has_mtdws: variant has the MTDWS bit
+ * @fifodepth: variant FIFO depth
+ */
+struct i2c_vendor_data {
+ bool has_mtdws;
+ u32 fifodepth;
+};
+
enum i2c_status {
I2C_NOP,
I2C_ON_GOING,
@@ -138,6 +147,7 @@ struct i2c_nmk_client {
/**
* struct nmk_i2c_dev - private data structure of the controller.
+ * @vendor: vendor data for this variant.
* @adev: parent amba device.
* @adap: corresponding I2C adapter.
* @irq: interrupt line for the controller.
@@ -151,6 +161,7 @@ struct i2c_nmk_client {
* @busy: Busy doing transfer.
*/
struct nmk_i2c_dev {
+ struct i2c_vendor_data *vendor;
struct amba_device *adev;
struct i2c_adapter adap;
int irq;
@@ -422,7 +433,7 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
I2C_IT_MAL | I2C_IT_BERR);
- if (dev->stop)
+ if (dev->stop || !dev->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
@@ -502,7 +513,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
* set the MTDWS bit (Master Transaction Done Without Stop)
* to start repeated start operation
*/
- if (dev->stop)
+ if (dev->stop || !dev->vendor->has_mtdws)
irq_mask |= I2C_IT_MTD;
else
irq_mask |= I2C_IT_MTDWS;
@@ -929,8 +940,6 @@ static void nmk_i2c_of_probe(struct device_node *np,
pdata->sm = I2C_FREQ_MODE_FAST;
}
-static atomic_t adapter_id = ATOMIC_INIT(0);
-
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
@@ -938,6 +947,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
struct device_node *np = adev->dev.of_node;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
+ struct i2c_vendor_data *vendor = id->data;
+ u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
if (!pdata) {
if (np) {
@@ -954,12 +965,25 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
pdata = &u8500_i2c;
}
+ if (pdata->tft > max_fifo_threshold) {
+ dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+ pdata->tft, max_fifo_threshold);
+ pdata->tft = max_fifo_threshold;
+ }
+
+ if (pdata->rft > max_fifo_threshold) {
+ dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+ pdata->rft, max_fifo_threshold);
+ pdata->rft = max_fifo_threshold;
+ }
+
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
dev_err(&adev->dev, "cannot allocate memory\n");
ret = -ENOMEM;
goto err_no_mem;
}
+ dev->vendor = vendor;
dev->busy = false;
dev->adev = adev;
amba_set_drvdata(adev, dev);
@@ -999,10 +1023,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
adap->algo = &nmk_i2c_algo;
adap->timeout = msecs_to_jiffies(pdata->timeout);
- adap->nr = atomic_read(&adapter_id);
snprintf(adap->name, sizeof(adap->name),
- "Nomadik I2C%d at %pR", adap->nr, &adev->res);
- atomic_inc(&adapter_id);
+ "Nomadik I2C at %pR", &adev->res);
/* fetch the controller configuration from machine */
dev->cfg.clk_freq = pdata->clk_freq;
@@ -1017,7 +1039,7 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
"initialize %s on virtual base %p\n",
adap->name, dev->virtbase);
- ret = i2c_add_numbered_adapter(adap);
+ ret = i2c_add_adapter(adap);
if (ret) {
dev_err(&adev->dev, "failed to add adapter\n");
goto err_add_adap;
@@ -1064,14 +1086,26 @@ static int nmk_i2c_remove(struct amba_device *adev)
return 0;
}
+static struct i2c_vendor_data vendor_stn8815 = {
+ .has_mtdws = false,
+ .fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */
+};
+
+static struct i2c_vendor_data vendor_db8500 = {
+ .has_mtdws = true,
+ .fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
+};
+
static struct amba_id nmk_i2c_ids[] = {
{
.id = 0x00180024,
.mask = 0x00ffffff,
+ .data = &vendor_stn8815,
},
{
.id = 0x00380024,
.mask = 0x00ffffff,
+ .data = &vendor_db8500,
},
{},
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e02f9e36a7b2..142b694d1c60 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -180,6 +180,8 @@ enum {
#define I2C_OMAP_ERRATA_I207 (1 << 0)
#define I2C_OMAP_ERRATA_I462 (1 << 1)
+#define OMAP_I2C_IP_V2_INTERRUPTS_MASK 0x6FFF
+
struct omap_i2c_dev {
spinlock_t lock; /* IRQ synchronization */
struct device *dev;
@@ -193,6 +195,7 @@ struct omap_i2c_dev {
long latency);
u32 speed; /* Speed of bus in kHz */
u32 flags;
+ u16 scheme;
u16 cmd_err;
u8 *buf;
u8 *regs;
@@ -1082,14 +1085,7 @@ omap_i2c_probe(struct platform_device *pdev)
int irq;
int r;
u32 rev;
- u16 minor, major, scheme;
-
- /* NOTE: driver uses the static register mapping */
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -ENODEV;
- }
+ u16 minor, major;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -1103,6 +1099,7 @@ omap_i2c_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->base = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(dev->base))
return PTR_ERR(dev->base);
@@ -1159,8 +1156,8 @@ omap_i2c_probe(struct platform_device *pdev)
*/
rev = __raw_readw(dev->base + 0x04);
- scheme = OMAP_I2C_SCHEME(rev);
- switch (scheme) {
+ dev->scheme = OMAP_I2C_SCHEME(rev);
+ switch (dev->scheme) {
case OMAP_I2C_SCHEME_0:
dev->regs = (u8 *)reg_map_ip_v1;
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG);
@@ -1289,7 +1286,11 @@ static int omap_i2c_runtime_suspend(struct device *dev)
_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
- omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+ if (_dev->scheme == OMAP_I2C_SCHEME_0)
+ omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+ else
+ omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR,
+ OMAP_I2C_IP_V2_INTERRUPTS_MASK);
if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index ea6d45d1dcd6..fbafed29fb81 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1160,7 +1160,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.class = plat->class;
}
- clk_enable(i2c->clk);
+ clk_prepare_enable(i2c->clk);
if (i2c->use_pio) {
i2c->adap.algo = &i2c_pxa_pio_algorithm;
@@ -1202,7 +1202,7 @@ eadapt:
if (!i2c->use_pio)
free_irq(irq, i2c);
ereqirq:
- clk_disable(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
@@ -1221,7 +1221,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
if (!i2c->use_pio)
free_irq(i2c->irq, i2c);
- clk_disable(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
clk_put(i2c->clk);
iounmap(i2c->reg_base);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 4ba4a95b6b26..0fc585861610 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -623,12 +623,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
u32 bus_speed;
int ret;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(dev, "no mmio resources\n");
- return -ENODEV;
- }
-
priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
if (!priv) {
dev_err(dev, "no mem for private data\n");
@@ -642,6 +636,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->io))
return PTR_ERR(priv->io);
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
new file mode 100644
index 000000000000..baaa7d15b73e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -0,0 +1,479 @@
+/*
+ * Wondermedia I2C Master Mode Driver
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * Derived from GPLv2+ licensed source:
+ * - Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, or
+ * (at your option) any later version. as published by the Free Software
+ * Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_i2c.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#define REG_CR 0x00
+#define REG_TCR 0x02
+#define REG_CSR 0x04
+#define REG_ISR 0x06
+#define REG_IMR 0x08
+#define REG_CDR 0x0A
+#define REG_TR 0x0C
+#define REG_MCR 0x0E
+#define REG_SLAVE_CR 0x10
+#define REG_SLAVE_SR 0x12
+#define REG_SLAVE_ISR 0x14
+#define REG_SLAVE_IMR 0x16
+#define REG_SLAVE_DR 0x18
+#define REG_SLAVE_TR 0x1A
+
+/* REG_CR Bit fields */
+#define CR_TX_NEXT_ACK 0x0000
+#define CR_ENABLE 0x0001
+#define CR_TX_NEXT_NO_ACK 0x0002
+#define CR_TX_END 0x0004
+#define CR_CPU_RDY 0x0008
+#define SLAV_MODE_SEL 0x8000
+
+/* REG_TCR Bit fields */
+#define TCR_STANDARD_MODE 0x0000
+#define TCR_MASTER_WRITE 0x0000
+#define TCR_HS_MODE 0x2000
+#define TCR_MASTER_READ 0x4000
+#define TCR_FAST_MODE 0x8000
+#define TCR_SLAVE_ADDR_MASK 0x007F
+
+/* REG_ISR Bit fields */
+#define ISR_NACK_ADDR 0x0001
+#define ISR_BYTE_END 0x0002
+#define ISR_SCL_TIMEOUT 0x0004
+#define ISR_WRITE_ALL 0x0007
+
+/* REG_IMR Bit fields */
+#define IMR_ENABLE_ALL 0x0007
+
+/* REG_CSR Bit fields */
+#define CSR_RCV_NOT_ACK 0x0001
+#define CSR_RCV_ACK_MASK 0x0001
+#define CSR_READY_MASK 0x0002
+
+/* REG_TR */
+#define SCL_TIMEOUT(x) (((x) & 0xFF) << 8)
+#define TR_STD 0x0064
+#define TR_HS 0x0019
+
+/* REG_MCR */
+#define MCR_APB_96M 7
+#define MCR_APB_166M 12
+
+#define I2C_MODE_STANDARD 0
+#define I2C_MODE_FAST 1
+
+#define WMT_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+struct wmt_i2c_dev {
+ struct i2c_adapter adapter;
+ struct completion complete;
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ int mode;
+ int irq;
+ u16 cmd_status;
+};
+
+static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + WMT_I2C_TIMEOUT;
+ while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
+ return -EBUSY;
+ }
+ msleep(20);
+ }
+
+ return 0;
+}
+
+static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
+{
+ int ret = 0;
+
+ if (i2c_dev->cmd_status & ISR_NACK_ADDR)
+ ret = -EIO;
+
+ if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
+ ret = -ETIMEDOUT;
+
+ return ret;
+}
+
+static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+ int last)
+{
+ struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ u16 val, tcr_val;
+ int ret, wait_result;
+ int xfer_len = 0;
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (pmsg->len == 0) {
+ /*
+ * We still need to run through the while (..) once, so
+ * start at -1 and break out early from the loop
+ */
+ xfer_len = -1;
+ writew(0, i2c_dev->base + REG_CDR);
+ } else {
+ writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
+ }
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ val = readw(i2c_dev->base + REG_CR);
+ val &= ~CR_TX_END;
+ writew(val, i2c_dev->base + REG_CR);
+
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_CPU_RDY;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+
+ INIT_COMPLETION(i2c_dev->complete);
+
+ if (i2c_dev->mode == I2C_MODE_STANDARD)
+ tcr_val = TCR_STANDARD_MODE;
+ else
+ tcr_val = TCR_FAST_MODE;
+
+ tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
+
+ writew(tcr_val, i2c_dev->base + REG_TCR);
+
+ if (pmsg->flags & I2C_M_NOSTART) {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_CPU_RDY;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+
+ while (xfer_len < pmsg->len) {
+ wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+ 500 * HZ / 1000);
+
+ if (wait_result == 0)
+ return -ETIMEDOUT;
+
+ ret = wmt_check_status(i2c_dev);
+ if (ret)
+ return ret;
+
+ xfer_len++;
+
+ val = readw(i2c_dev->base + REG_CSR);
+ if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
+ dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
+ return -EIO;
+ }
+
+ if (pmsg->len == 0) {
+ val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
+ writew(val, i2c_dev->base + REG_CR);
+ break;
+ }
+
+ if (xfer_len == pmsg->len) {
+ if (last != 1)
+ writew(CR_ENABLE, i2c_dev->base + REG_CR);
+ } else {
+ writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
+ REG_CDR);
+ writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
+ }
+ }
+
+ return 0;
+}
+
+static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+ int last)
+{
+ struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+ u16 val, tcr_val;
+ int ret, wait_result;
+ u32 xfer_len = 0;
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ val = readw(i2c_dev->base + REG_CR);
+ val &= ~CR_TX_END;
+ writew(val, i2c_dev->base + REG_CR);
+
+ val = readw(i2c_dev->base + REG_CR);
+ val &= ~CR_TX_NEXT_NO_ACK;
+ writew(val, i2c_dev->base + REG_CR);
+
+ if (!(pmsg->flags & I2C_M_NOSTART)) {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_CPU_RDY;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+
+ if (pmsg->len == 1) {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_TX_NEXT_NO_ACK;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+
+ INIT_COMPLETION(i2c_dev->complete);
+
+ if (i2c_dev->mode == I2C_MODE_STANDARD)
+ tcr_val = TCR_STANDARD_MODE;
+ else
+ tcr_val = TCR_FAST_MODE;
+
+ tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
+
+ writew(tcr_val, i2c_dev->base + REG_TCR);
+
+ if (pmsg->flags & I2C_M_NOSTART) {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_CPU_RDY;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+
+ while (xfer_len < pmsg->len) {
+ wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+ 500 * HZ / 1000);
+
+ if (!wait_result)
+ return -ETIMEDOUT;
+
+ ret = wmt_check_status(i2c_dev);
+ if (ret)
+ return ret;
+
+ pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
+ xfer_len++;
+
+ if (xfer_len == pmsg->len - 1) {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY);
+ writew(val, i2c_dev->base + REG_CR);
+ } else {
+ val = readw(i2c_dev->base + REG_CR);
+ val |= CR_CPU_RDY;
+ writew(val, i2c_dev->base + REG_CR);
+ }
+ }
+
+ return 0;
+}
+
+static int wmt_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg msgs[],
+ int num)
+{
+ struct i2c_msg *pmsg;
+ int i, is_last;
+ int ret = 0;
+
+ for (i = 0; ret >= 0 && i < num; i++) {
+ is_last = ((i + 1) == num);
+
+ pmsg = &msgs[i];
+ if (pmsg->flags & I2C_M_RD)
+ ret = wmt_i2c_read(adap, pmsg, is_last);
+ else
+ ret = wmt_i2c_write(adap, pmsg, is_last);
+ }
+
+ return (ret < 0) ? ret : i;
+}
+
+static u32 wmt_i2c_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm wmt_i2c_algo = {
+ .master_xfer = wmt_i2c_xfer,
+ .functionality = wmt_i2c_func,
+};
+
+static irqreturn_t wmt_i2c_isr(int irq, void *data)
+{
+ struct wmt_i2c_dev *i2c_dev = data;
+
+ /* save the status and write-clear it */
+ i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
+ writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
+
+ complete(&i2c_dev->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
+{
+ int err;
+
+ err = clk_prepare_enable(i2c_dev->clk);
+ if (err) {
+ dev_err(i2c_dev->dev, "failed to enable clock\n");
+ return err;
+ }
+
+ err = clk_set_rate(i2c_dev->clk, 20000000);
+ if (err) {
+ dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
+ return err;
+ }
+
+ writew(0, i2c_dev->base + REG_CR);
+ writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
+ writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+ writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
+ writew(CR_ENABLE, i2c_dev->base + REG_CR);
+ readw(i2c_dev->base + REG_CSR); /* read clear */
+ writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+
+ if (i2c_dev->mode == I2C_MODE_STANDARD)
+ writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
+ else
+ writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
+
+ return 0;
+}
+
+static int wmt_i2c_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct wmt_i2c_dev *i2c_dev;
+ struct i2c_adapter *adap;
+ struct resource *res;
+ int err;
+ u32 clk_rate;
+
+ i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+ if (!i2c_dev) {
+ dev_err(&pdev->dev, "device memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(i2c_dev->base))
+ return PTR_ERR(i2c_dev->base);
+
+ i2c_dev->irq = irq_of_parse_and_map(np, 0);
+ if (!i2c_dev->irq) {
+ dev_err(&pdev->dev, "irq missing or invalid\n");
+ return -EINVAL;
+ }
+
+ i2c_dev->clk = of_clk_get(np, 0);
+ if (IS_ERR(i2c_dev->clk)) {
+ dev_err(&pdev->dev, "unable to request clock\n");
+ return PTR_ERR(i2c_dev->clk);
+ }
+
+ i2c_dev->mode = I2C_MODE_STANDARD;
+ err = of_property_read_u32(np, "clock-frequency", &clk_rate);
+ if ((!err) && (clk_rate == 400000))
+ i2c_dev->mode = I2C_MODE_FAST;
+
+ i2c_dev->dev = &pdev->dev;
+
+ err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
+ "i2c", i2c_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
+ return err;
+ }
+
+ adap = &i2c_dev->adapter;
+ i2c_set_adapdata(adap, i2c_dev);
+ strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
+ adap->owner = THIS_MODULE;
+ adap->algo = &wmt_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->dev.of_node = pdev->dev.of_node;
+
+ init_completion(&i2c_dev->complete);
+
+ err = wmt_i2c_reset_hardware(i2c_dev);
+ if (err) {
+ dev_err(&pdev->dev, "error initializing hardware\n");
+ return err;
+ }
+
+ err = i2c_add_adapter(adap);
+ if (err) {
+ dev_err(&pdev->dev, "failed to add adapter\n");
+ return err;
+ }
+
+ platform_set_drvdata(pdev, i2c_dev);
+
+ of_i2c_register_devices(adap);
+
+ return 0;
+}
+
+static int wmt_i2c_remove(struct platform_device *pdev)
+{
+ struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+ /* Disable interrupts, clock and delete adapter */
+ writew(0, i2c_dev->base + REG_IMR);
+ clk_disable_unprepare(i2c_dev->clk);
+ i2c_del_adapter(&i2c_dev->adapter);
+
+ return 0;
+}
+
+static struct of_device_id wmt_i2c_dt_ids[] = {
+ { .compatible = "wm,wm8505-i2c" },
+ { /* Sentinel */ },
+};
+
+static struct platform_driver wmt_i2c_driver = {
+ .probe = wmt_i2c_probe,
+ .remove = wmt_i2c_remove,
+ .driver = {
+ .name = "wmt-i2c",
+ .owner = THIS_MODULE,
+ .of_match_table = wmt_i2c_dt_ids,
+ },
+};
+
+module_platform_driver(wmt_i2c_driver);
+
+MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);