summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-05-26 20:28:12 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2022-05-26 20:28:12 +0300
commitae862183285cbb2ef9032770d98ffa9becffe9d5 (patch)
treefcceed35ddadcab9100abcf830c09949cddab3c8
parentc011dd537ffe47462051930413fed07dbdc80313 (diff)
parent82706d6fb19d0b845146f7108fce3926502c5f52 (diff)
downloadlinux-ae862183285cbb2ef9032770d98ffa9becffe9d5.tar.xz
Merge tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann: "There are 40 branches this time, adding a lot of new hardware support, and cleanups. Krzysztof Kozlowski continues his treewide cleanups. There are a number of new SoCs, all of them as part of existing families, and typically added along with a reference board: - Renesas RZ/G2UL (R9A07G043) is the single-core version of the RZ/G2L general-purpose MPU. - Renesas RZ/V2M (R9A09G011) is a smart camera SoC - Renesas R-Car V4H (R8A779G0) is an automotive chip with Cortex-A76 cores and deep learning accerlation. - Broadcom BCM47622 is a new broadband SoC based on a quad Cortex-A7 and dual Wifi-6. - Corstone1000 is a generic platform from Arm that is used for designing custom SoCs, the support for now is for the Fixed Virtual Platform emulation for it. - Mediatek MT8195 (Kompanio 1200) is a high-end consumer chip used in upcoming Chromebooks. - NXP i.MXRT1050 is a Cortex-M7 based microcontroller, the first MMU-less SoC to be added in a while New machines based on already supported SoCs this time are mainly for 32-bit platforms and include: - Two wireless routers based on Broadcom bcm4708 - 30 new boards based on NXP i.MX6, i.MX7 and i.MX8 families, mostly for the industrial embedded market, and on NXP LS1021A based IOT board. - Two ethernet switches based on Microchip LAN966 - Eight Qualcomm Snapdragon based machines, including a smartwatch, a Chromebook board and some phones - Another phone based on the old ST-Ericsson Ux500 platform - Seven STM32MP1 based boards - Four single-board computers based on Rockchip RK3566/RK3568" * tag 'arm-dt-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (791 commits) ARM: dts: kswitch-d10: enable networking ARM: dts: lan966x: add switch node ARM: dts: lan966x: add serdes node ARM: dts: lan966x: add reset switch reset node ARM: dts: lan966x: add MIIM nodes ARM: dts: lan966x: add hwmon node ARM: dts: lan966x: add basic Kontron KSwitch D10 support ARM: dts: lan966x: add flexcom I2C nodes ARM: dts: lan966x: add flexcom SPI nodes ARM: dts: lan966x: add all flexcom usart nodes ARM: dts: lan966x: add missing uart DMA channel ARM: dts: lan966x: add sgpio node ARM: dts: lan966x: swap dma channels for crypto node ARM: dts: lan966x: rename pinctrl nodes ARM: dts: at91: sama7g5: remove interrupt-parent from gic node ARM: dts: at91: use generic node name for dataflash ARM: dts: turris-omnia: Add atsha204a node arm64: dts: mt8192: Follow binding order for SCP registers arm64: dts: mediatek: add mtk-snfi for mt7622 arm64: dts: mediatek: mt8195-demo: enable uart1 ...
-rw-r--r--Documentation/devicetree/bindings/arm/arm,corstone1000.yaml45
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml10
-rw-r--r--Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml33
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml119
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.yaml5
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml1
-rw-r--r--Documentation/devicetree/bindings/arm/omap/prcm.txt7
-rw-r--r--Documentation/devicetree/bindings/arm/qcom.yaml1
-rw-r--r--Documentation/devicetree/bindings/arm/renesas.yaml20
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml23
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/stm32.yaml63
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml5
-rw-r--r--Documentation/devicetree/bindings/arm/syna.txt4
-rw-r--r--Documentation/devicetree/bindings/arm/ux500.yaml5
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml172
-rw-r--r--Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml219
-rw-r--r--Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml41
-rw-r--r--Documentation/devicetree/bindings/clock/ti-clkctrl.txt4
-rw-r--r--Documentation/devicetree/bindings/clock/ti/clockdomain.txt3
-rw-r--r--Documentation/devicetree/bindings/clock/ti/composite.txt3
-rw-r--r--Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/ti/gate.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/ti/interface.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/ti/mux.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-dma.txt8
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml80
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml1
-rw-r--r--Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml1
-rw-r--r--Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml1
-rw-r--r--Documentation/devicetree/bindings/reset/renesas,rst.yaml1
-rw-r--r--Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml84
-rw-r--r--Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml104
-rw-r--r--Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml (renamed from Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml)7
-rw-r--r--Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml1
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml24
-rw-r--r--arch/arm/boot/dts/Makefile54
-rw-r--r--arch/arm/boot/dts/am335x-baltos.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-bone-common.dtsi4
-rw-r--r--arch/arm/boot/dts/am335x-evm.dts4
-rw-r--r--arch/arm/boot/dts/am335x-evmsk.dts4
-rw-r--r--arch/arm/boot/dts/am335x-guardian.dts376
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-myirtech-myc.dtsi12
-rw-r--r--arch/arm/boot/dts/am335x-myirtech-myd.dts20
-rw-r--r--arch/arm/boot/dts/am335x-phycore-som.dtsi2
-rw-r--r--arch/arm/boot/dts/am335x-sl50.dts2
-rw-r--r--arch/arm/boot/dts/am33xx-clocks.dtsi373
-rw-r--r--arch/arm/boot/dts/am33xx.dtsi3
-rw-r--r--arch/arm/boot/dts/am35xx-clocks.dtsi52
-rw-r--r--arch/arm/boot/dts/am3874-iceboard.dts2
-rw-r--r--arch/arm/boot/dts/am437x-cm-t43.dts2
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts5
-rw-r--r--arch/arm/boot/dts/am437x-idk-evm.dts2
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts6
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts6
-rw-r--r--arch/arm/boot/dts/am43xx-clocks.dtsi339
-rw-r--r--arch/arm/boot/dts/am574x-idk.dts2
-rw-r--r--arch/arm/boot/dts/am57xx-cl-som-am57x.dts2
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-370-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-370-synology-ds213j.dts2
-rw-r--r--arch/arm/boot/dts/armada-375-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-381-netgear-gs110emx.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-atl-x530.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-385-db-88f6820-amc.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-db-ap.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-synology-ds116.dts2
-rw-r--r--arch/arm/boot/dts/armada-385-turris-omnia.dts8
-rw-r--r--arch/arm/boot/dts/armada-388-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-388-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-388-rd.dts2
-rw-r--r--arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-390-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-398-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-axpwifiap.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-db-dxbc2.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-db.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-gp.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-linksys-mamba.dts2
-rw-r--r--arch/arm/boot/dts/armada-xp-synology-ds414.dts2
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi12
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a-plus.dts21
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-a.dts35
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-plus.dts19
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts35
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-b.dts48
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts1
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero-w.dts25
-rw-r--r--arch/arm/boot/dts/bcm2835-rpi-zero.dts29
-rw-r--r--arch/arm/boot/dts/bcm2836-rpi-2-b.dts3
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts1
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts5
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-3-b.dts3
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts5
-rw-r--r--arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi12
-rw-r--r--arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi192
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts26
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts26
-rw-r--r--arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts19
-rw-r--r--arch/arm/boot/dts/bcm47622.dtsi126
-rw-r--r--arch/arm/boot/dts/bcm53016-meraki-mr32.dts2
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts2
-rw-r--r--arch/arm/boot/dts/bcm947622.dts30
-rw-r--r--arch/arm/boot/dts/bcm953012er.dts2
-rw-r--r--arch/arm/boot/dts/bcm953012hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm953012k.dts2
-rw-r--r--arch/arm/boot/dts/bcm958522er.dts2
-rw-r--r--arch/arm/boot/dts/bcm958525er.dts2
-rw-r--r--arch/arm/boot/dts/bcm958525xmc.dts2
-rw-r--r--arch/arm/boot/dts/bcm958622hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958623hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958625k.dts2
-rw-r--r--arch/arm/boot/dts/bcm988312hr.dts2
-rw-r--r--arch/arm/boot/dts/dm814x.dtsi3
-rw-r--r--arch/arm/boot/dts/dm816x.dtsi3
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts2
-rw-r--r--arch/arm/boot/dts/dove-d2plug.dts2
-rw-r--r--arch/arm/boot/dts/dove-d3plug.dts2
-rw-r--r--arch/arm/boot/dts/dove-dove-db.dts2
-rw-r--r--arch/arm/boot/dts/dra7-evm-common.dtsi2
-rw-r--r--arch/arm/boot/dts/dra72-evm-common.dtsi2
-rw-r--r--arch/arm/boot/dts/dra76-evm.dts2
-rw-r--r--arch/arm/boot/dts/dra7xx-clocks.dtsi693
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi10
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts2
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidu3.dts4
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts8
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts4
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi16
-rw-r--r--arch/arm/boot/dts/exynos5260.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts4
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi10
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts6
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3.dts6
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi3
-rw-r--r--arch/arm/boot/dts/imx27.dtsi2
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-m28evk.dts2
-rw-r--r--arch/arm/boot/dts/imx28-sps1.dts2
-rw-r--r--arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts8
-rw-r--r--arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi25
-rw-r--r--arch/arm/boot/dts/imx51.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-aster.dts113
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts110
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts46
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-iris.dts152
-rw-r--r--arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts31
-rw-r--r--arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts6
-rw-r--r--arch/arm/boot/dts/imx6dl-plybas.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-rex-basic.dts2
-rw-r--r--arch/arm/boot/dts/imx6dl-victgo.dts657
-rw-r--r--arch/arm/boot/dts/imx6dl-vicut1.dts1
-rw-r--r--arch/arm/boot/dts/imx6q-ba16.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6q-bosch-acc.dts779
-rw-r--r--arch/arm/boot/dts/imx6q-bx50v3.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6q-cm-fx6.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-dms-ba16.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-gw5400-a.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-marsboard.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-rex-pro.dts2
-rw-r--r--arch/arm/boot/dts/imx6q-vicut1.dts5
-rw-r--r--arch/arm/boot/dts/imx6qdl-aristainetos.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi44
-rw-r--r--arch/arm/boot/dts/imx6qdl-colibri.dtsi771
-rw-r--r--arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabrelite.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-tx6.dtsi5
-rw-r--r--arch/arm/boot/dts/imx6qdl-udoo.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi128
-rw-r--r--arch/arm/boot/dts/imx6qdl-vicut1.dtsi261
-rw-r--r--arch/arm/boot/dts/imx6qp-vicutp.dts1
-rw-r--r--arch/arm/boot/dts/imx6sl-evk.dts2
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6sx-nitrogen6sx.dts2
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb-reva.dts4
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dts4
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi3
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi211
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts55
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi37
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts15
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi71
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts15
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi71
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi43
-rw-r--r--arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi48
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-aster.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-aster.dtsi145
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts17
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts17
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts17
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi8
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts6
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi63
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts65
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi27
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-iris.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-iris.dtsi132
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi145
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts4
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts65
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi144
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri.dtsi285
-rw-r--r--arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts20
-rw-r--r--arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi588
-rw-r--r--arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts15
-rw-r--r--arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi76
-rw-r--r--arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts15
-rw-r--r--arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi76
-rw-r--r--arch/arm/boot/dts/imx7d-smegw01.dts469
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi2
-rw-r--r--arch/arm/boot/dts/imxrt1050-evk.dts72
-rw-r--r--arch/arm/boot/dts/imxrt1050.dtsi160
-rw-r--r--arch/arm/boot/dts/keystone-k2e-evm.dts4
-rw-r--r--arch/arm/boot/dts/keystone-k2g-evm.dts2
-rw-r--r--arch/arm/boot/dts/keystone-k2g-ice.dts2
-rw-r--r--arch/arm/boot/dts/keystone-k2hk-evm.dts4
-rw-r--r--arch/arm/boot/dts/keystone-k2l-evm.dts4
-rw-r--r--arch/arm/boot/dts/kirkwood-dir665.dts2
-rw-r--r--arch/arm/boot/dts/kirkwood-synology.dtsi2
-rw-r--r--arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts94
-rw-r--r--arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts39
-rw-r--r--arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi190
-rw-r--r--arch/arm/boot/dts/lan966x-pcb8291.dts2
-rw-r--r--arch/arm/boot/dts/lan966x.dtsi353
-rw-r--r--arch/arm/boot/dts/logicpd-som-lv.dtsi10
-rw-r--r--arch/arm/boot/dts/ls1021a-iot.dts227
-rw-r--r--arch/arm/boot/dts/ls1021a.dtsi6
-rw-r--r--arch/arm/boot/dts/mba6ulx.dtsi569
-rw-r--r--arch/arm/boot/dts/meson8-minix-neo-x8.dts2
-rw-r--r--arch/arm/boot/dts/mt2701.dtsi2
-rw-r--r--arch/arm/boot/dts/mt7623n.dtsi5
-rw-r--r--arch/arm/boot/dts/nspire-classic.dtsi10
-rw-r--r--arch/arm/boot/dts/nspire-cx.dts4
-rw-r--r--arch/arm/boot/dts/nspire.dtsi60
-rw-r--r--arch/arm/boot/dts/nuvoton-npcm730-gbs.dts6
-rw-r--r--arch/arm/boot/dts/nuvoton-npcm730-gsj.dts2
-rw-r--r--arch/arm/boot/dts/nuvoton-npcm730-kudo.dts6
-rw-r--r--arch/arm/boot/dts/nuvoton-npcm750-evb.dts8
-rw-r--r--arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts6
-rw-r--r--arch/arm/boot/dts/omap3-beagle-xm.dts2
-rw-r--r--arch/arm/boot/dts/omap3430es1-clocks.dtsi184
-rw-r--r--arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi275
-rw-r--r--arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi79
-rw-r--r--arch/arm/boot/dts/omap36xx-clocks.dtsi17
-rw-r--r--arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi136
-rw-r--r--arch/arm/boot/dts/omap3xxx-clocks.dtsi2044
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi2
-rw-r--r--arch/arm/boot/dts/omap443x-clocks.dtsi1
-rw-r--r--arch/arm/boot/dts/omap446x-clocks.dtsi2
-rw-r--r--arch/arm/boot/dts/omap44xx-clocks.dtsi173
-rw-r--r--arch/arm/boot/dts/omap5-igep0050.dts2
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts2
-rw-r--r--arch/arm/boot/dts/omap54xx-clocks.dtsi160
-rw-r--r--arch/arm/boot/dts/ox820.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts294
-rw-r--r--arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts (renamed from arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts)0
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi16
-rw-r--r--arch/arm/boot/dts/qcom-apq8074-dragonboard.dts582
-rw-r--r--arch/arm/boot/dts/qcom-apq8084.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts2
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts2
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-ipq4019.dtsi42
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom-ipq8064.dtsi12
-rw-r--r--arch/arm/boot/dts/qcom-mdm9615.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-msm8226.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom-msm8660.dtsi1
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts409
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts1052
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts908
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts435
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts723
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts484
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts13
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts7
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi457
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi1730
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts432
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts813
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts608
-rw-r--r--arch/arm/boot/dts/qcom-msm8974pro.dtsi32
-rw-r--r--arch/arm/boot/dts/qcom-pm8226.dtsi41
-rw-r--r--arch/arm/boot/dts/qcom-pm8941.dtsi2
-rw-r--r--arch/arm/boot/dts/qcom-pmx65.dtsi32
-rw-r--r--arch/arm/boot/dts/qcom-sdx55.dtsi9
-rw-r--r--arch/arm/boot/dts/qcom-sdx65-mtp.dts221
-rw-r--r--arch/arm/boot/dts/qcom-sdx65.dtsi193
-rw-r--r--arch/arm/boot/dts/r8a7743.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7744.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7745.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a77470.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7790.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7793.dtsi1
-rw-r--r--arch/arm/boot/dts/r8a7794.dtsi1
-rw-r--r--arch/arm/boot/dts/r9a06g032.dtsi113
-rw-r--r--arch/arm/boot/dts/rk3036.dtsi4
-rw-r--r--arch/arm/boot/dts/rk3188-bqedison2qc.dts3
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi2
-rw-r--r--arch/arm/boot/dts/s5pv210-aquila.dts3
-rw-r--r--arch/arm/boot/dts/s5pv210-aries.dtsi11
-rw-r--r--arch/arm/boot/dts/s5pv210-goni.dts6
-rw-r--r--arch/arm/boot/dts/s5pv210.dtsi46
-rw-r--r--arch/arm/boot/dts/sama7g5.dtsi1
-rw-r--r--arch/arm/boot/dts/socfpga.dtsi4
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi4
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi12
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts785
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-codina.dts80
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-gavini.dts4
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-golden.dts4
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-janice.dts44
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-kyle.dts4
-rw-r--r--arch/arm/boot/dts/ste-ux500-samsung-skomer.dts35
-rw-r--r--arch/arm/boot/dts/stm32f4-pinctrl.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32f7-pinctrl.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32h743.dtsi2
-rw-r--r--arch/arm/boot/dts/stm32mp131.dtsi19
-rw-r--r--arch/arm/boot/dts/stm32mp135f-dk.dts29
-rw-r--r--arch/arm/boot/dts/stm32mp15-pinctrl.dtsi64
-rw-r--r--arch/arm/boot/dts/stm32mp151.dtsi45
-rw-r--r--arch/arm/boot/dts/stm32mp151a-prtt1a.dts52
-rw-r--r--arch/arm/boot/dts/stm32mp151a-prtt1c.dts304
-rw-r--r--arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi229
-rw-r--r--arch/arm/boot/dts/stm32mp151a-prtt1s.dts63
-rw-r--r--arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts86
-rw-r--r--arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts95
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts91
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts100
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi22
-rw-r--r--arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi1
-rw-r--r--arch/arm/boot/dts/sun8i-h3-nanopi.dtsi1
-rw-r--r--arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts31
-rw-r--r--arch/arm/boot/dts/suniv-f1c100s.dtsi104
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts30
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts8
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile38
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts16
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-s4.dtsi33
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts2
-rw-r--r--arch/arm64/boot/dts/arm/Makefile1
-rw-r--r--arch/arm64/boot/dts/arm/corstone1000-fvp.dts51
-rw-r--r--arch/arm64/boot/dts/arm/corstone1000-mps3.dts32
-rw-r--r--arch/arm64/boot/dts/arm/corstone1000.dtsi164
-rw-r--r--arch/arm64/boot/dts/arm/foundation-v8.dtsi2
-rw-r--r--arch/arm64/boot/dts/arm/fvp-base-revc.dts3
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi164
-rw-r--r--arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi37
-rw-r--r--arch/arm64/boot/dts/arm/juno-r1-scmi.dts8
-rw-r--r--arch/arm64/boot/dts/arm/juno-r1.dts25
-rw-r--r--arch/arm64/boot/dts/arm/juno-r2-scmi.dts8
-rw-r--r--arch/arm64/boot/dts/arm/juno-r2.dts25
-rw-r--r--arch/arm64/boot/dts/arm/juno-scmi.dtsi25
-rw-r--r--arch/arm64/boot/dts/arm/juno.dts25
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi11
-rw-r--r--arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi4
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts2
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts2
-rw-r--r--arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi2
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts4
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi2
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi9
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi4
-rw-r--r--arch/arm64/boot/dts/exynos/exynos850-e850-96.dts5
-rw-r--r--arch/arm64/boot/dts/exynos/exynos850.dtsi19
-rw-r--r--arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts4
-rw-r--r--arch/arm64/boot/dts/exynos/exynosautov9.dtsi116
-rw-r--r--arch/arm64/boot/dts/freescale/Makefile9
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts9
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi10
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi6
-rw-r--r--arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi74
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi3
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts997
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi20
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts334
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi1
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi1
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts16
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts17
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts1
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi26
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi411
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi8
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi3
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts90
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts114
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-evk.dts54
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi45
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts8
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mn.dtsi14
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts175
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi186
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts896
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi129
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi46
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts18
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts18
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi54
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts18
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts18
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi82
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi1380
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mp.dtsi247
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi15
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts2
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi15
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp-mek.dts25
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp.dtsi24
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi4
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3670.dtsi4
-rw-r--r--arch/arm64/boot/dts/intel/socfpga_agilex.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-db.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts9
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts21
-rw-r--r--arch/arm64/boot/dts/marvell/armada-37xx.dtsi4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-7040-db.dts4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-db.dts4
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap80x.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp11x.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/cn9130-crb.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/cn9130-db.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/cn9131-db.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/Makefile2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt2712e.dtsi10
-rw-r--r--arch/arm64/boot/dts/mediatek/mt6359.dtsi298
-rw-r--r--arch/arm64/boot/dts/mediatek/mt7622.dtsi20
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8167.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8173.dtsi29
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts2
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183.dtsi17
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8192-evb.dts1
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8192.dtsi526
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8195-demo.dts450
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8195-evb.dts181
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8195.dtsi1045
-rw-r--r--arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi1
-rw-r--r--arch/arm64/boot/dts/microchip/sparx5_nand.dtsi2
-rw-r--r--arch/arm64/boot/dts/microchip/sparx5_pcb125.dts4
-rw-r--r--arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi4
-rw-r--r--arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi4
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts223
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts2
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi15
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts225
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi225
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194.dtsi42
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts2
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi5
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi12
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts223
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra234.dtsi67
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile5
-rw-r--r--arch/arm64/boot/dts/qcom/apq8096-db820c.dts6
-rw-r--r--arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/ipq6018.dtsi34
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074-hk01.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/ipq8074.dtsi42
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts59
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi102
-rw-r--r--arch/arm64/boot/dts/qcom/msm8953.dtsi52
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts36
-rw-r--r--arch/arm64/boot/dts/qcom/msm8992.dtsi24
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts21
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi89
-rw-r--r--arch/arm64/boot/dts/qcom/msm8994.dtsi126
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-mtp.dts8
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi18
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi36
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts9
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts9
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi250
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi31
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi15
-rw-r--r--arch/arm64/boot/dts/qcom/pm8350.dtsi31
-rw-r--r--arch/arm64/boot/dts/qcom/pm8350b.dtsi31
-rw-r--r--arch/arm64/boot/dts/qcom/pm8350c.dtsi41
-rw-r--r--arch/arm64/boot/dts/qcom/pm8450.dtsi59
-rw-r--r--arch/arm64/boot/dts/qcom/pmr735a.dtsi32
-rw-r--r--arch/arm64/boot/dts/qcom/pmr735b.dtsi31
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi94
-rw-r--r--arch/arm64/boot/dts/qcom/qrb5165-rb5.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sa8155p-adp.dts193
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi11
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi7
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts6
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts6
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi7
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi9
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts9
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi9
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180.dtsi9
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts (renamed from arch/arm64/boot/dts/qcom/sc7280-crd.dts)7
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts365
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts1352
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts38
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts304
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi93
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-idp.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-idp.dtsi36
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-idp2.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi73
-rw-r--r--arch/arm64/boot/dts/qcom/sc7280.dtsi336
-rw-r--r--arch/arm64/boot/dts/qcom/sdm630.dtsi4
-rw-r--r--arch/arm64/boot/dts/qcom/sdm660.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-db845c.dts33
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts35
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi34
-rw-r--r--arch/arm64/boot/dts/qcom/sm6350.dtsi241
-rw-r--r--arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts61
-rw-r--r--arch/arm64/boot/dts/qcom/sm8150.dtsi330
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi30
-rw-r--r--arch/arm64/boot/dts/qcom/sm8250.dtsi339
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350-hdk.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts12
-rw-r--r--arch/arm64/boot/dts/qcom/sm8350.dtsi186
-rw-r--r--arch/arm64/boot/dts/qcom/sm8450-hdk.dts41
-rw-r--r--arch/arm64/boot/dts/qcom/sm8450-qrd.dts34
-rw-r--r--arch/arm64/boot/dts/qcom/sm8450.dtsi2500
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile6
-rw-r--r--arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi10
-rw-r--r--arch/arm64/boot/dts/renesas/draak.dtsi60
-rw-r--r--arch/arm64/boot/dts/renesas/ebisu.dtsi60
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi6
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774b1.dtsi6
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0.dtsi8
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774e1.dtsi5
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77951.dtsi22
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77960.dtsi22
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77961.dtsi47
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi22
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77970.dtsi6
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77980.dtsi6
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi24
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi24
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi12
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts24
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779a0.dtsi131
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi20
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi15
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779f0-spider.dts10
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779f0.dtsi163
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi45
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts22
-rw-r--r--arch/arm64/boot/dts/renesas/r8a779g0.dtsi122
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g043.dtsi885
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts21
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g044.dtsi8
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts76
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g054.dtsi592
-rw-r--r--arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts8
-rw-r--r--arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts44
-rw-r--r--arch/arm64/boot/dts/renesas/r9a09g011.dtsi93
-rw-r--r--arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi24
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi30
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi64
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi61
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi38
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi119
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi251
-rw-r--r--arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi63
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi51
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb-kf.dtsi10
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi49
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi22
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-firefly.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi7
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi12
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi28
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi25
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts2
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi3
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi45
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi80
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts37
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts615
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts579
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts177
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi616
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3566.dtsi11
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts102
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts46
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts562
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3568.dtsi23
-rw-r--r--arch/arm64/boot/dts/rockchip/rk356x.dtsi74
-rw-r--r--arch/arm64/boot/dts/synaptics/as370.dtsi173
-rw-r--r--arch/arm64/boot/dts/tesla/fsd.dtsi10
-rw-r--r--arch/arm64/boot/dts/ti/k3-am62-main.dtsi307
-rw-r--r--arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi48
-rw-r--r--arch/arm64/boot/dts/ti/k3-am62.dtsi1
-rw-r--r--arch/arm64/boot/dts/ti/k3-am625-sk.dts289
-rw-r--r--arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi2
-rw-r--r--arch/arm64/boot/dts/ti/k3-am642-sk.dts62
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts77
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-main.dtsi75
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-sk.dts139
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts9
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts6
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi4
-rw-r--r--arch/arm64/boot/dts/toshiba/tmpv7708.dtsi96
-rw-r--r--include/dt-bindings/clock/qcom,gcc-msm8998.h4
-rw-r--r--include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h43
-rw-r--r--include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h26
-rw-r--r--include/dt-bindings/clock/r8a779g0-cpg-mssr.h90
-rw-r--r--include/dt-bindings/clock/r9a07g043-cpg.h184
-rw-r--r--include/dt-bindings/clock/r9a09g011-cpg.h352
-rw-r--r--include/dt-bindings/clock/samsung,exynosautov9.h299
-rw-r--r--include/dt-bindings/clock/stm32mp1-clks.h46
-rw-r--r--include/dt-bindings/clock/tegra234-clock.h8
-rw-r--r--include/dt-bindings/power/imx8mp-power.h18
-rw-r--r--include/dt-bindings/power/r8a779g0-sysc.h45
-rw-r--r--include/dt-bindings/reset/mt8192-resets.h3
-rw-r--r--include/dt-bindings/reset/stm32mp1-resets.h24
-rw-r--r--include/dt-bindings/reset/tegra234-reset.h2
710 files changed, 43161 insertions, 11430 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 000000000000..a77f88223801
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000 Device Tree Bindings
+
+maintainers:
+ - Vishnu Banavath <vishnu.banavath@arm.com>
+ - Rui Miguel Silva <rui.silva@linaro.org>
+
+description: |+
+ ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+ provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+ processors.
+
+ Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+ systems for M-Class (or other) processors for adding sensors, connectivity,
+ video, audio and machine learning at the edge System and security IPs to build
+ a secure SoC for a range of rich IoT applications, for example gateways, smart
+ cameras and embedded systems.
+
+ Integrated Secure Enclave providing hardware Root of Trust and supporting
+ seamless integration of the optional CryptoCellâ„¢-312 cryptographic
+ accelerator.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+ implementation of the Corstone1000 in the MPS3 prototyping board. See
+ ARM document DAI0550.
+ items:
+ - const: arm,corstone1000-mps3
+ - description: Corstone1000 FVP is the Fixed Virtual Platform
+ implementation of this system. See ARM ecosystems FVP's.
+ items:
+ - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 434d3c6db61e..8b7e87fb6c34 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -64,6 +64,7 @@ properties:
- description: BCM47094 based boards
items:
- enum:
+ - asus,rt-ac88u
- dlink,dir-885l
- linksys,panamera
- luxul,abr-4500-v1
@@ -83,9 +84,14 @@ properties:
- brcm,bcm953012er
- brcm,bcm953012hr
- brcm,bcm953012k
+ - const: brcm,bcm53012
+ - const: brcm,bcm4708
+
+ - description: BCM53016 based boards
+ items:
+ - enum:
- meraki,mr32
- - const: brcm,brcm53012
- - const: brcm,brcm53016
+ - const: brcm,bcm53016
- const: brcm,bcm4708
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 000000000000..5fb455840417
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC device tree bindings
+
+description:
+ Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+ chips that can be used as home gateway, router and WLAN AP for residential,
+ enterprise and carrier applications.
+
+maintainers:
+ - William Zhang <william.zhang@broadcom.com>
+ - Anand Gore <anand.gore@broadcom.com>
+ - Kursad Oney <kursad.oney@broadcom.com>
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: BCM47622 based boards
+ items:
+ - enum:
+ - brcm,bcm947622
+ - const: brcm,bcm47622
+ - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 08bdd30e511c..ef524378d449 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -172,7 +172,7 @@ properties:
- karo,tx53 # Ka-Ro electronics TX53 module
- kiebackpeter,imx53-ddc # K+P imx53 DDC
- kiebackpeter,imx53-hsc # K+P imx53 HSC
- - menlo,m53menlo
+ - menlo,m53menlo # i.MX53 Menlo board
- voipac,imx53-dmm-668 # Voipac i.MX53 X53-DMM-668
- const: fsl,imx53
@@ -192,6 +192,7 @@ properties:
items:
- enum:
- auvidea,h100 # Auvidea H100
+ - bosch,imx6q-acc # Bosch ACC i.MX6 Dual
- boundary,imx6q-nitrogen6_max
- boundary,imx6q-nitrogen6_som2
- boundary,imx6q-nitrogen6x
@@ -411,7 +412,6 @@ properties:
- technologic,imx6dl-ts4900
- technologic,imx6dl-ts7970
- toradex,colibri_imx6dl # Colibri iMX6 Modules
- - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules
- udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board
- vdl,lanmcu # Van der Laan LANMCU board
- wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board
@@ -488,17 +488,13 @@ properties:
- description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
items:
- enum:
+ - toradex,colibri_imx6dl-aster # Colibri iMX6DL/S Module on Aster Board
- toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+ - toradex,colibri_imx6dl-iris # Colibri iMX6DL/S Module on Iris Board
+ - toradex,colibri_imx6dl-iris-v2 # Colibri iMX6DL/S Module on Iris Board V2
- const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module
- const: fsl,imx6dl
- - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules
- items:
- - enum:
- - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3
- - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module
- - const: fsl,imx6dl
-
- description: i.MX6S DHCOM DRC02 Board
items:
- const: dh,imx6s-dhcom-drc02
@@ -613,6 +609,28 @@ properties:
- const: kontron,imx6ul-n6310-som
- const: fsl,imx6ul
+ - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
+ items:
+ - enum:
+ - tq,imx6ul-tqma6ul1-mba6ulx
+ - const: tq,imx6ul-tqma6ul1 # MCIMX6G1
+ - const: fsl,imx6ul
+
+ - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
+ items:
+ - enum:
+ - tq,imx6ul-tqma6ul2-mba6ulx
+ - const: tq,imx6ul-tqma6ul2 # MCIMX6G2
+ - const: fsl,imx6ul
+
+ - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
+ items:
+ - enum:
+ - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+ - tq,imx6ul-tqma6ul2l-mba6ulxl
+ - const: tq,imx6ul-tqma6ul2l # MCIMX6G2, LGA SoM variant
+ - const: fsl,imx6ul
+
- description: i.MX6ULL based Boards
items:
- enum:
@@ -640,26 +658,44 @@ properties:
- const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
- const: fsl,imx6ull
+ - description: i.MX6ULL PHYTEC phyGATE-Tauri
+ items:
+ - enum:
+ - phytec,imx6ull-phygate-tauri-emmc
+ - phytec,imx6ull-phygate-tauri-nand
+ - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+ - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
+ - const: fsl,imx6ull
+
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
items:
- enum:
- - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
+ - toradex,colibri-imx6ull-aster # Colibri iMX6ULL Module on Aster Carrier Board
+ - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board V3
+ - toradex,colibri-imx6ull-iris # Colibri iMX6ULL Module on Iris Carrier Board
+ - toradex,colibri-imx6ull-iris-v2 # Colibri iMX6ULL Module on Iris V2 Carrier Board
- const: toradex,colibri-imx6ull # Colibri iMX6ULL Module
- - const: fsl,imx6dl
+ - const: fsl,imx6ull
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
items:
- enum:
- - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board
- - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
- - const: fsl,imx6dl
+ - toradex,colibri-imx6ull-emmc-aster # Colibri iMX6ULL 1G (eMMC) on Aster Carrier Board
+ - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1G (eMMC) on Colibri Evaluation B. V3
+ - toradex,colibri-imx6ull-emmc-iris # Colibri iMX6ULL 1G (eMMC) on Iris Carrier Board
+ - toradex,colibri-imx6ull-emmc-iris-v2 # Colibri iMX6ULL 1G (eMMC) on Iris V2 Carrier Board
+ - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
+ - const: fsl,imx6ull
- description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
items:
- enum:
- - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board
- - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module
- - const: fsl,imx6dl
+ - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Eval. B. V3
+ - toradex,colibri-imx6ull-wifi-aster # Colibri iMX6ULL Wi-Fi / BT M. on Aster Carrier Board
+ - toradex,colibri-imx6ull-wifi-iris # Colibri iMX6ULL Wi-Fi / BT M. on Iris Carrier Board
+ - toradex,colibri-imx6ull-wifi-iris-v2 # Colibri iMX6ULL Wi-Fi / BT M. on Iris V2 Carrier Board
+ - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module
+ - const: fsl,imx6ull
- description: Kontron N6411 S Board
items:
@@ -667,6 +703,21 @@ properties:
- const: kontron,imx6ull-n6411-som
- const: fsl,imx6ull
+ - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+ items:
+ - enum:
+ - tq,imx6ull-tqma6ull2-mba6ulx
+ - const: tq,imx6ull-tqma6ull2 # MCIMX6Y2
+ - const: fsl,imx6ull
+
+ - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+ items:
+ - enum:
+ - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
+ - tq,imx6ull-tqma6ull2l-mba6ulxl
+ - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant
+ - const: fsl,imx6ull
+
- description: i.MX6ULZ based Boards
items:
- enum:
@@ -707,6 +758,7 @@ properties:
- kam,imx7d-flex-concentrator-mfg # Kamstrup OMNIA Flex Concentrator in manufacturing mode
- novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- remarkable,imx7d-remarkable2 # i.MX7D ReMarkable 2 E-Ink Tablet
+ - storopack,imx7d-smegw01 # Storopack i.MX7D SMEGW01
- technexion,imx7d-pico-dwarf # TechNexion i.MX7D Pico-Dwarf
- technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
- technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph
@@ -762,6 +814,7 @@ properties:
- enum:
- beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit
- boundary,imx8mm-nitrogen8mm # i.MX8MM Nitrogen Board
+ - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
- emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
- fsl,imx8mm-ddr4-evk # i.MX8MM DDR4 EVK Board
- fsl,imx8mm-evk # i.MX8MM EVK Board
@@ -772,6 +825,7 @@ properties:
- gw,imx8mm-gw7902 # i.MX8MM Gateworks Board
- gw,imx8mm-gw7903 # i.MX8MM Gateworks Board
- kontron,imx8mm-n801x-som # i.MX8MM Kontron SL (N801X) SOM
+ - menlo,mx8menlo # i.MX8MM Menlo board with Verdin SoM
- toradex,verdin-imx8mm # Verdin iMX8M Mini Modules
- toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Modules without Wi-Fi / BT
- toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Modules
@@ -834,6 +888,7 @@ properties:
- beacon,imx8mn-beacon-kit # i.MX8MN Beacon Development Kit
- bsh,imx8mn-bsh-smm-s2 # i.MX8MN BSH SystemMaster S2
- bsh,imx8mn-bsh-smm-s2pro # i.MX8MN BSH SystemMaster S2 PRO
+ - fsl,imx8mn-ddr3l-evk # i.MX8MN DDR3L EVK Board
- fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board
- fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board
- gw,imx8mn-gw7902 # i.MX8MM Gateworks Board
@@ -860,6 +915,17 @@ properties:
items:
- enum:
- fsl,imx8mp-evk # i.MX8MP EVK Board
+ - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board
+ - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules
+ - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT
+ - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules
+ - const: fsl,imx8mp
+
+ - description: Engicam i.Core MX8M Plus SoM based boards
+ items:
+ - enum:
+ - engicam,icore-mx8mp-edimm2.2 # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+ - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM
- const: fsl,imx8mp
- description: PHYTEC phyCORE-i.MX8MP SoM based boards
@@ -868,6 +934,24 @@ properties:
- const: phytec,imx8mp-phycore-som # phyCORE-i.MX8MP SoM
- const: fsl,imx8mp
+ - description: Toradex Boards with Verdin iMX8M Plus Modules
+ items:
+ - enum:
+ - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+ - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board
+ - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT
+ - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
+ - const: fsl,imx8mp
+
+ - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+ items:
+ - enum:
+ - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+ - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+ - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module
+ - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module
+ - const: fsl,imx8mp
+
- description: i.MX8MQ based Boards
items:
- enum:
@@ -999,6 +1083,7 @@ properties:
- description: LS1021A based Boards
items:
- enum:
+ - fsl,ls1021a-iot
- fsl,ls1021a-moxa-uc-8410a
- fsl,ls1021a-qds
- fsl,ls1021a-tsn
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index ab0593c77321..4a2bd9759c47 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -133,6 +133,11 @@ properties:
- const: mediatek,mt8183
- items:
- enum:
+ - mediatek,mt8192-evb
+ - const: mediatek,mt8192
+ - items:
+ - enum:
+ - mediatek,mt8195-demo
- mediatek,mt8195-evb
- const: mediatek,mt8195
- description: Google Burnet (HP Chromebook x360 11MK G3 EE)
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index 8723dfe34bab..611f666f359d 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -26,6 +26,7 @@ properties:
- mediatek,mt8135-pericfg
- mediatek,mt8173-pericfg
- mediatek,mt8183-pericfg
+ - mediatek,mt8195-pericfg
- mediatek,mt8516-pericfg
- const: syscon
- items:
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 3eb6d7afff14..431ef8c56a13 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -31,12 +31,17 @@ Required properties:
(base address and length)
- clocks: clocks for this module
- clockdomains: clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
Example:
-cm: cm@48004000 {
+cm: clock@48004000 {
compatible = "ti,omap3-cm";
reg = <0x48004000 0x4000>;
+ #clock-cells = <0>;
+ clock-output-names = "cm";
cm_clocks: clocks {
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 129cdd246223..7f89ab344d3f 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -99,6 +99,7 @@ properties:
- items:
- enum:
+ - asus,sparrow
- lg,lenok
- const: qcom,apq8026
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index fa435d6fda77..ff80152f092f 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -327,6 +327,18 @@ properties:
- const: renesas,spider-cpu
- const: renesas,r8a779f0
+ - description: R-Car V4H (R8A779G0)
+ items:
+ - enum:
+ - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000)
+ - const: renesas,r8a779g0
+
+ - items:
+ - enum:
+ - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000)
+ - const: renesas,white-hawk-cpu
+ - const: renesas,r8a779g0
+
- description: R-Car H3e (R8A779M0)
items:
- enum:
@@ -406,6 +418,8 @@ properties:
- description: RZ/G2UL (R9A07G043)
items:
- enum:
+ - renesas,smarc-evk # SMARC EVK
+ - enum:
- renesas,r9a07g043u11 # RZ/G2UL Type-1
- renesas,r9a07g043u12 # RZ/G2UL Type-2
- const: renesas,r9a07g043
@@ -430,6 +444,12 @@ properties:
- renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L
- const: renesas,r9a07g054
+ - description: RZ/V2M (R9A09G011)
+ items:
+ - enum:
+ - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0
+ - const: renesas,r9a09g011
+
additionalProperties: true
...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index eece92f83a2d..cf9eb1e8326a 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -133,6 +133,11 @@ properties:
- firefly,roc-rk3399-pc-plus
- const: rockchip,rk3399
+ - description: Firefly Station M2
+ items:
+ - const: firefly,rk3566-roc-pc
+ - const: rockchip,rk3566
+
- description: FriendlyElec NanoPi R2S
items:
- const: friendlyarm,nanopi-r2s
@@ -502,9 +507,18 @@ properties:
- const: pine64,rockpro64
- const: rockchip,rk3399
- - description: Pine64 Quartz64 Model A
+ - description: Pine64 Quartz64 Model A/B
items:
- - const: pine64,quartz64-a
+ - enum:
+ - pine64,quartz64-a
+ - pine64,quartz64-b
+ - const: rockchip,rk3566
+
+ - description: Pine64 SoQuartz SoM
+ items:
+ - enum:
+ - pine64,soquartz-cm4io
+ - const: pine64,soquartz
- const: rockchip,rk3566
- description: Radxa Rock
@@ -545,6 +559,11 @@ properties:
- const: radxa,rock2-square
- const: rockchip,rk3288
+ - description: Radxa ROCK3 Model A
+ items:
+ - const: radxa,rock3a
+ - const: rockchip,rk3568
+
- description: Rikomagic MK808 v1
items:
- const: rikomagic,mk808
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index fa0a1b84122e..8b31565fee59 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -14,21 +14,6 @@ properties:
const: "/"
compatible:
oneOf:
- - description: DH STM32MP1 SoM based Boards
- items:
- - enum:
- - arrow,stm32mp157a-avenger96 # Avenger96
- - dh,stm32mp153c-dhcom-drc02
- - dh,stm32mp157c-dhcom-pdk2
- - dh,stm32mp157c-dhcom-picoitx
- - enum:
- - dh,stm32mp153c-dhcom-som
- - dh,stm32mp157a-dhcor-som
- - dh,stm32mp157c-dhcom-som
- - enum:
- - st,stm32mp153
- - st,stm32mp157
-
- description: emtrion STM32MP1 Argon based Boards
items:
- const: emtrion,stm32mp157c-emsbc-argon
@@ -65,6 +50,21 @@ properties:
- enum:
- st,stm32mp135f-dk
- const: st,stm32mp135
+
+ - description: ST STM32MP151 based Boards
+ items:
+ - enum:
+ - prt,prtt1a # Protonic PRTT1A
+ - prt,prtt1c # Protonic PRTT1C
+ - prt,prtt1s # Protonic PRTT1S
+ - const: st,stm32mp151
+
+ - description: DH STM32MP153 SoM based Boards
+ items:
+ - const: dh,stm32mp153c-dhcom-drc02
+ - const: dh,stm32mp153c-dhcom-som
+ - const: st,stm32mp153
+
- items:
- enum:
- shiratech,stm32mp157a-iot-box # IoT Box
@@ -72,13 +72,45 @@ properties:
- st,stm32mp157c-ed1
- st,stm32mp157a-dk1
- st,stm32mp157c-dk2
+ - const: st,stm32mp157
+ - items:
+ - const: st,stm32mp157a-dk1-scmi
+ - const: st,stm32mp157a-dk1
- const: st,stm32mp157
- items:
+ - const: st,stm32mp157c-dk2-scmi
+ - const: st,stm32mp157c-dk2
+ - const: st,stm32mp157
+ - items:
+ - const: st,stm32mp157c-ed1-scmi
+ - const: st,stm32mp157c-ed1
+ - const: st,stm32mp157
+ - items:
+ - const: st,stm32mp157c-ev1
+ - const: st,stm32mp157c-ed1
+ - const: st,stm32mp157
+ - items:
+ - const: st,stm32mp157c-ev1-scmi
- const: st,stm32mp157c-ev1
- const: st,stm32mp157c-ed1
- const: st,stm32mp157
+ - description: DH STM32MP1 SoM based Boards
+ items:
+ - enum:
+ - arrow,stm32mp157a-avenger96 # Avenger96
+ - const: dh,stm32mp157a-dhcor-som
+ - const: st,stm32mp157
+
+ - description: DH STM32MP1 SoM based Boards
+ items:
+ - enum:
+ - dh,stm32mp157c-dhcom-pdk2
+ - dh,stm32mp157c-dhcom-picoitx
+ - const: dh,stm32mp157c-dhcom-som
+ - const: st,stm32mp157
+
- description: Engicam i.Core STM32MP1 SoM based Boards
items:
- enum:
@@ -103,6 +135,7 @@ properties:
- const: oct,stm32mp15xx-osd32
- enum:
- st,stm32mp157
+
- description: Odyssey STM32MP1 SoM based Boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 086c68771d2b..95278a6a9a8e 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -391,6 +391,11 @@ properties:
- const: libretech,all-h5-cc-h5
- const: allwinner,sun50i-h5
+ - description: Lichee Pi Nano
+ items:
+ - const: licheepi,licheepi-nano
+ - const: allwinner,suniv-f1c100s
+
- description: Lichee Pi One
items:
- const: licheepi,licheepi-one
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index d8b48f2edf1b..851f48ead927 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -18,10 +18,6 @@ stable binding/ABI.
---------------------------------------------------------------
-Boards with the Synaptics AS370 SoC shall have the following properties:
- Required root node property:
- compatible: "syna,as370"
-
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
shall have the following properties:
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
index a46193ad94e0..17accb31bca0 100644
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -40,6 +40,11 @@ properties:
- const: samsung,codina
- const: st-ericsson,u8500
+ - description: Samsung Galaxy Exhibit (SGH-T599)
+ items:
+ - const: samsung,codina-tmo
+ - const: st-ericsson,u8500
+
- description: Samsung Galaxy Beam (GT-I8530)
items:
- const: samsung,gavini
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..bad9135489de
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller Binding for SC7280
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm LPASS core and audio clock control module which supports the
+ clocks and power domains on SC7280.
+
+ See also:
+ - dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+ - dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ compatible:
+ enum:
+ - qcom,sc7280-lpassaoncc
+ - qcom,sc7280-lpassaudiocc
+ - qcom,sc7280-lpasscorecc
+ - qcom,sc7280-lpasshm
+
+ power-domains:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sc7280-lpassaudiocc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: lpass_aon_cc_main_rcg_clk_src
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-lpassaoncc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Board XO active only source
+ - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: bi_tcxo_ao
+ - const: iface
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc7280-lpasshm
+ - qcom,sc7280-lpasscorecc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Board XO source
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_audiocc: clock-controller@3300000 {
+ compatible = "qcom,sc7280-lpassaudiocc";
+ reg = <0x3300000 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+ clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_hm: clock-controller@3c00000 {
+ compatible = "qcom,sc7280-lpasshm";
+ reg = <0x3c00000 0x28>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpasscore: clock-controller@3900000 {
+ compatible = "qcom,sc7280-lpasscorecc";
+ reg = <0x3900000 0x50000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ - |
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+ #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+ lpass_aon: clock-controller@3380000 {
+ compatible = "qcom,sc7280-lpassaoncc";
+ reg = <0x3380000 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+ <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..eafc715d2d02
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+ - Chanho Park <chanho61.park@samsung.com>
+ - Chanwoo Choi <cw00.choi@samsung.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ Exynos Auto v9 clock controller is comprised of several CMU units, generating
+ clocks for different domains. Those CMU units are modeled as separate device
+ tree nodes, and might depend on each other. Root clocks in that clock tree are
+ two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+ The external OSCCLK must be defined as fixed-rate clock in dts.
+
+ CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+ dividers; all other clocks of function blocks (other CMUs) are usually
+ derived from CMU_TOP.
+
+ Each clock is assigned an identifier and client nodes can use this identifier
+ to specify the clock which they consume. All clocks available for usage
+ in clock consumer nodes are defined as preprocessor macros in
+ 'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynosautov9-cmu-top
+ - samsung,exynosautov9-cmu-busmc
+ - samsung,exynosautov9-cmu-core
+ - samsung,exynosautov9-cmu-fsys2
+ - samsung,exynosautov9-cmu-peric0
+ - samsung,exynosautov9-cmu-peric1
+ - samsung,exynosautov9-cmu-peris
+
+ clocks:
+ minItems: 1
+ maxItems: 5
+
+ clock-names:
+ minItems: 1
+ maxItems: 5
+
+ "#clock-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-top
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+
+ clock-names:
+ items:
+ - const: oscclk
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-busmc
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_busmc_bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-core
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_CORE bus clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_core_bus
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-fsys2
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_FSYS2 bus clock (from CMU_TOP)
+ - description: UFS clock (from CMU_TOP)
+ - description: Ethernet clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_fsys2_bus
+ - const: dout_fsys2_clkcmu_ufs_embd
+ - const: dout_fsys2_clkcmu_ethernet
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-peric0
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIC0 bus clock (from CMU_TOP)
+ - description: PERIC0 IP clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_peric0_bus
+ - const: dout_clkcmu_peric0_ip
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-peric1
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIC1 bus clock (from CMU_TOP)
+ - description: PERIC1 IP clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_peric1_bus
+ - const: dout_clkcmu_peric1_ip
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynosautov9-cmu-peris
+
+ then:
+ properties:
+ clocks:
+ items:
+ - description: External reference clock (26 MHz)
+ - description: CMU_PERIS bus clock (from CMU_TOP)
+
+ clock-names:
+ items:
+ - const: oscclk
+ - const: dout_clkcmu_peris_bus
+
+required:
+ - compatible
+ - "#clock-cells"
+ - clocks
+ - clock-names
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Clock controller node for CMU_FSYS2
+ - |
+ #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+ cmu_fsys2: clock-controller@17c00000 {
+ compatible = "samsung,exynosautov9-cmu-fsys2";
+ reg = <0x17c00000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+ clock-names = "oscclk",
+ "dout_clkcmu_fsys2_bus",
+ "dout_fsys2_clkcmu_ufs_embd",
+ "dout_fsys2_clkcmu_ethernet";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index a0ae4867ed27..45b94124366c 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -58,6 +58,8 @@ properties:
- st,stm32mp1-rcc-secure
- st,stm32mp1-rcc
- const: syscon
+ clocks: true
+ clock-names: true
reg:
maxItems: 1
@@ -68,14 +70,53 @@ required:
- compatible
- reg
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32mp1-rcc-secure
+then:
+ properties:
+ clocks:
+ description: Specifies oscillators.
+ maxItems: 5
+
+ clock-names:
+ items:
+ - const: hse
+ - const: hsi
+ - const: csi
+ - const: lse
+ - const: lsi
+ required:
+ - clocks
+ - clock-names
+else:
+ properties:
+ clocks:
+ description:
+ Specifies the external RX clock for ethernet MAC.
+ maxItems: 1
+
+ clock-names:
+ const: ETH_RX_CLK/ETH_REF_CLK
+
additionalProperties: false
examples:
- |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc-secure", "syscon";
reg = <0x50000000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
};
...
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
index 18af6b9409e3..d20db7974a38 100644
--- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -21,6 +21,7 @@ Required properties :
"ti,clkctrl-l4-per"
"ti,clkctrl-l4-secure"
"ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
- #clock-cells : shall contain 2 with the first entry being the instance
offset from the clock domain base and the second being the
clock index
@@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430:
l4per: cm@1400 {
cm_l4per@0 {
cm_l4per_clkctrl: clock@20 {
- compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_per";
reg = <0x20 0x1b0>;
#clock-cells = <2>;
};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index cb76b3f2b341..9c6199249ce5 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -17,6 +17,9 @@ Required properties:
- #clock-cells : from common clock binding; shall be set to 0.
- clocks : link phandles of clocks within this domain
+Optional properties:
+- clock-output-names : from common clock binding.
+
Examples:
dss_clkdm: dss_clkdm {
compatible = "ti,clockdomain";
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
index 5f43c4706b09..33ac7c9ad053 100644
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -27,6 +27,9 @@ Required properties:
- clocks : link phandles of component clocks
- #clock-cells : from common clock binding; shall be set to 0.
+Optional properties:
+- clock-output-names : from common clock binding.
+
Examples:
usb_l4_gate_ick: usb_l4_gate_ick {
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 662b36d53bf0..518e3c142276 100644
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -16,6 +16,7 @@ Required properties:
- clocks: parent clock.
Optional properties:
+- clock-output-names : from common clock binding.
- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
see [2]
- reg: offset for the autoidle register of this clock, see [2]
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 56d603c1f716..b4820b1de4f0 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -36,6 +36,7 @@ Required properties:
ti,clkdm-gate-clock type
Optional properties:
+- clock-output-names : from common clock binding.
- ti,bit-shift : bit shift for programming the clock gate, invalid for
ti,clkdm-gate-clock type
- ti,set-bit-to-disable : inverts default gate programming. Setting the bit
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3f4704040140..94ec77dc3c59 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -28,6 +28,7 @@ Required properties:
- reg : base address for the control register
Optional properties:
+- clock-output-names : from common clock binding.
- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
Examples:
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index eec8994b9be8..e17425a58621 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -42,6 +42,7 @@ Required properties:
- reg : register offset for register controlling adjustable mux
Optional properties:
+- clock-output-names : from common clock binding.
- ti,bit-shift : number of bits to shift the bit-mask, defaults to
0 if not present
- ti,index-starts-at-one : valid input select programming starts at 1, not
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
index 7bd8847d6394..1c9929d53727 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -13,8 +13,10 @@ Required properties:
- #dma-cells : Has to be 1. imx-dma does not support anything else.
Optional properties:
-- #dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-requests : Number of DMA requests supported.
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
Example:
@@ -23,7 +25,7 @@ Example:
reg = <0x10001000 0x1000>;
interrupts = <32 33>;
#dma-cells = <1>;
- #dma-channels = <16>;
+ dma-channels = <16>;
};
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 13c4c82fd0d3..c7cfa6c2cd81 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -34,8 +34,12 @@ properties:
- nvidia,tegra234-mc
reg:
- minItems: 1
- maxItems: 3
+ minItems: 6
+ maxItems: 18
+
+ reg-names:
+ minItems: 6
+ maxItems: 18
interrupts:
items:
@@ -142,7 +146,18 @@ allOf:
then:
properties:
reg:
- maxItems: 1
+ maxItems: 6
+ description: 5 memory controller channels and 1 for stream-id registers
+
+ reg-names:
+ maxItems: 6
+ items:
+ - const: sid
+ - const: broadcast
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
- if:
properties:
@@ -151,7 +166,30 @@ allOf:
then:
properties:
reg:
- minItems: 3
+ minItems: 18
+ description: 17 memory controller channels and 1 for stream-id registers
+
+ reg-names:
+ minItems: 18
+ items:
+ - const: sid
+ - const: broadcast
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+ - const: ch4
+ - const: ch5
+ - const: ch6
+ - const: ch7
+ - const: ch8
+ - const: ch9
+ - const: ch10
+ - const: ch11
+ - const: ch12
+ - const: ch13
+ - const: ch14
+ - const: ch15
- if:
properties:
@@ -160,13 +198,37 @@ allOf:
then:
properties:
reg:
- minItems: 3
+ minItems: 18
+ description: 17 memory controller channels and 1 for stream-id registers
+
+ reg-names:
+ minItems: 18
+ items:
+ - const: sid
+ - const: broadcast
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+ - const: ch4
+ - const: ch5
+ - const: ch6
+ - const: ch7
+ - const: ch8
+ - const: ch9
+ - const: ch10
+ - const: ch11
+ - const: ch12
+ - const: ch13
+ - const: ch14
+ - const: ch15
additionalProperties: false
required:
- compatible
- reg
+ - reg-names
- interrupts
- "#address-cells"
- "#size-cells"
@@ -182,7 +244,13 @@ examples:
memory-controller@2c00000 {
compatible = "nvidia,tegra186-mc";
- reg = <0x0 0x02c00000 0x0 0xb0000>;
+ reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */
+ <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */
+ <0x0 0x02c20000 0x0 0x10000>, /* MC0 */
+ <0x0 0x02c30000 0x0 0x10000>, /* MC1 */
+ <0x0 0x02c40000 0x0 0x10000>, /* MC2 */
+ <0x0 0x02c50000 0x0 0x10000>; /* MC3 */
+ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 9a6dbf54b540..6744d17f1efd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -39,6 +39,7 @@ properties:
- items:
- enum:
+ - renesas,r9a07g043-rpc-if # RZ/G2UL
- renesas,r9a07g044-rpc-if # RZ/G2{L,LC}
- renesas,r9a07g054-rpc-if # RZ/V2L
- const: renesas,rzg2l-rpc-if
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
index f5a531738d93..76199a67d628 100644
--- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -39,6 +39,7 @@ properties:
compatible:
items:
- enum:
+ - prt,prtt1c-wfm200 # Protonic PRTT1C Board
- silabs,brd4001a # WGM160P Evaluation Board
- silabs,brd8022a # WF200 Evaluation Board
- silabs,brd8023a # WFM200 Evaluation Board
diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
index 76c417990f12..8d56bedd3390 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.yaml
@@ -44,6 +44,7 @@ properties:
- renesas,r8a77995-sysc # R-Car D3
- renesas,r8a779a0-sysc # R-Car V3U
- renesas,r8a779f0-sysc # R-Car S4-8
+ - renesas,r8a779g0-sysc # R-Car V4H
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.yaml b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
index bbe313bf1796..0d1b89e2fe9c 100644
--- a/Documentation/devicetree/bindings/reset/renesas,rst.yaml
+++ b/Documentation/devicetree/bindings/reset/renesas,rst.yaml
@@ -49,6 +49,7 @@ properties:
- renesas,r8a77995-rst # R-Car D3
- renesas,r8a779a0-rst # R-Car V3U
- renesas,r8a779f0-rst # R-Car S4-8
+ - renesas,r8a779g0-rst # R-Car V4H
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
new file mode 100644
index 000000000000..563e1d0e327f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP HDMI blk-ctrl
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+ The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to
+ the NoC and ensuring proper power sequencing of the display pipeline
+ peripherals located in the HDMI domain of the SoC.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8mp-hdmi-blk-ctrl
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ power-domains:
+ minItems: 8
+ maxItems: 8
+
+ power-domain-names:
+ items:
+ - const: bus
+ - const: irqsteer
+ - const: lcdif
+ - const: pai
+ - const: pvi
+ - const: trng
+ - const: hdmi-tx
+ - const: hdmi-tx-phy
+
+ clocks:
+ minItems: 4
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: apb
+ - const: axi
+ - const: ref_266m
+ - const: ref_24m
+
+required:
+ - compatible
+ - reg
+ - power-domains
+ - power-domain-names
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+
+ blk-ctrl@32fc0000 {
+ compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon";
+ reg = <0x32fc0000 0x23c>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "axi", "ref_266m", "ref_24m";
+ power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+ <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>,
+ <&pgc_hdmimix>, <&pgc_hdmi_phy>;
+ power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng",
+ "hdmi-tx", "hdmi-tx-phy";
+ #power-domain-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
new file mode 100644
index 000000000000..21d3ee486295
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP Media Block Control
+
+maintainers:
+ - Paul Elder <paul.elder@ideasonboard.com>
+
+description:
+ The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral
+ providing access to the NoC and ensuring proper power sequencing of the
+ peripherals within the MEDIAMIX domain.
+
+properties:
+ compatible:
+ items:
+ - const: fsl,imx8mp-media-blk-ctrl
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ power-domains:
+ maxItems: 10
+
+ power-domain-names:
+ items:
+ - const: bus
+ - const: mipi-dsi1
+ - const: mipi-csi1
+ - const: lcdif1
+ - const: isi
+ - const: mipi-csi2
+ - const: lcdif2
+ - const: isp
+ - const: dwe
+ - const: mipi-dsi2
+
+ clocks:
+ items:
+ - description: The APB clock
+ - description: The AXI clock
+ - description: The pixel clock for the first CSI2 receiver (aclk)
+ - description: The pixel clock for the second CSI2 receiver (aclk)
+ - description: The pixel clock for the first LCDIF (pix_clk)
+ - description: The pixel clock for the second LCDIF (pix_clk)
+ - description: The core clock for the ISP (clk)
+ - description: The MIPI-PHY reference clock used by DSI
+
+ clock-names:
+ items:
+ - const: apb
+ - const: axi
+ - const: cam1
+ - const: cam2
+ - const: disp1
+ - const: disp2
+ - const: isp
+ - const: phy
+
+required:
+ - compatible
+ - reg
+ - '#power-domain-cells'
+ - power-domains
+ - power-domain-names
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+
+ media_blk_ctl: blk-ctl@32ec0000 {
+ compatible = "fsl,imx8mp-media-blk-ctrl", "syscon";
+ reg = <0x32ec0000 0x138>;
+ power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>,
+ <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>,
+ <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>,
+ <&mipi_phy2_pd>;
+ power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi",
+ "mipi-csi2", "lcdif2", "isp1", "dwe", "mipi-dsi2";
+ clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+ clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2",
+ "isp", "phy";
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
index bb433e75a0ee..ce2875c89329 100644
--- a/Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml
+++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/power/renesas,rzg2l-sysc.yaml#"
+$id: "http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Renesas RZ/{G2L,V2L} System Controller (SYSC)
@@ -10,8 +10,8 @@ maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
description:
- The RZ/{G2L,V2L} System Controller (SYSC) performs system control of the LSI
- and supports following functions,
+ The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of
+ the LSI and supports following functions,
- External terminal state capture function
- 34-bit address space access function
- Low power consumption control
@@ -20,6 +20,7 @@ description:
properties:
compatible:
enum:
+ - renesas,r9a07g043-sysc # RZ/G2UL
- renesas,r9a07g044-sysc # RZ/G2{L,LC}
- renesas,r9a07g054-sysc # RZ/V2L
diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
index 908248260afa..ca4c95345a49 100644
--- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml
@@ -26,6 +26,7 @@ properties:
- allwinner,sun8i-r40-spi
- allwinner,sun50i-h6-spi
- allwinner,sun50i-h616-spi
+ - allwinner,suniv-f1c100s-spi
- const: allwinner,sun8i-h3-spi
reg:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 44508b20a4d7..495a01ced97e 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1201,6 +1201,8 @@ patternProperties:
description: StorLink Semiconductors, Inc.
"^storm,.*":
description: Storm Semiconductor, Inc.
+ "^storopack,.*":
+ description: Storopack
"^summit,.*":
description: Summit microelectronics
"^sunchip,.*":
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 43afa24513b9..cbcf19f51411 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -26,10 +26,8 @@ properties:
- allwinner,sun50i-h616-wdt
- allwinner,sun50i-r329-wdt
- allwinner,sun50i-r329-wdt-reset
+ - allwinner,suniv-f1c100s-wdt
- const: allwinner,sun6i-a31-wdt
- - items:
- - const: allwinner,suniv-f1c100s-wdt
- - const: allwinner,sun4i-a10-wdt
- const: allwinner,sun20i-d1-wdt
- items:
- const: allwinner,sun20i-d1-wdt-reset
@@ -41,14 +39,8 @@ properties:
clocks:
minItems: 1
items:
- - description: High-frequency oscillator input, divided internally
- - description: Low-frequency oscillator input, only found on some variants
-
- clock-names:
- minItems: 1
- items:
- - const: hosc
- - const: losc
+ - description: 32 KHz input clock
+ - description: secondary clock source
interrupts:
maxItems: 1
@@ -73,9 +65,14 @@ then:
properties:
clocks:
minItems: 2
+ items:
+ - description: High-frequency oscillator input, divided internally
+ - description: Low-frequency oscillator input
clock-names:
- minItems: 2
+ items:
+ - const: hosc
+ - const: losc
required:
- clock-names
@@ -85,9 +82,6 @@ else:
clocks:
maxItems: 1
- clock-names:
- maxItems: 1
-
unevaluatedProperties: false
examples:
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7c16f8a2b738..edfbedaa6168 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -103,6 +103,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-buffalo-wzr-1166dhp.dtb \
+ bcm4708-buffalo-wzr-1166dhp2.dtb \
bcm4708-linksys-ea6300-v1.dtb \
bcm4708-linksys-ea6500-v2.dtb \
bcm4708-luxul-xap-1510.dtb \
@@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2q-marvell-dmp.dtb
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+ bcm947622.dtb
dtb-$(CONFIG_ARCH_CLPS711X) += \
ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
@@ -458,8 +462,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos_7.dtb \
imx6dl-aristainetos2_4.dtb \
imx6dl-aristainetos2_7.dtb \
+ imx6dl-colibri-aster.dtb \
imx6dl-colibri-eval-v3.dtb \
- imx6dl-colibri-v1_1-eval-v3.dtb \
+ imx6dl-colibri-iris.dtb \
+ imx6dl-colibri-iris-v2.dtb \
imx6dl-cubox-i.dtb \
imx6dl-cubox-i-emmc-som-v15.dtb \
imx6dl-cubox-i-som-v15.dtb \
@@ -547,6 +553,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-b450v3.dtb \
imx6q-b650v3.dtb \
imx6q-b850v3.dtb \
+ imx6q-bosch-acc.dtb \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-cubox-i-emmc-som-v15.dtb \
@@ -690,6 +697,9 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-kontron-n6310-s.dtb \
imx6ul-kontron-n6310-s-43.dtb \
imx6ul-liteboard.dtb \
+ imx6ul-tqma6ul1-mba6ulx.dtb \
+ imx6ul-tqma6ul2-mba6ulx.dtb \
+ imx6ul-tqma6ul2l-mba6ulx.dtb \
imx6ul-opos6uldev.dtb \
imx6ul-pico-dwarf.dtb \
imx6ul-pico-hobbit.dtb \
@@ -701,15 +711,28 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
+ imx6ull-colibri-aster.dtb \
+ imx6ull-colibri-emmc-aster.dtb \
imx6ull-colibri-emmc-eval-v3.dtb \
+ imx6ull-colibri-emmc-iris.dtb \
+ imx6ull-colibri-emmc-iris-v2.dtb \
imx6ull-colibri-eval-v3.dtb \
+ imx6ull-colibri-iris.dtb \
+ imx6ull-colibri-iris-v2.dtb \
+ imx6ull-colibri-wifi-aster.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ull-colibri-wifi-iris.dtb \
+ imx6ull-colibri-wifi-iris-v2.dtb \
imx6ull-jozacp.dtb \
imx6ull-myir-mys-6ulx-eval.dtb \
imx6ull-opos6uldev.dtb \
imx6ull-phytec-segin-ff-rdk-nand.dtb \
imx6ull-phytec-segin-ff-rdk-emmc.dtb \
imx6ull-phytec-segin-lc-rdk-nand.dtb \
+ imx6ull-phytec-tauri-emmc.dtb \
+ imx6ull-phytec-tauri-nand.dtb \
+ imx6ull-tqma6ull2-mba6ulx.dtb \
+ imx6ull-tqma6ull2l-mba6ulx.dtb \
imx6ulz-14x14-evk.dtb \
imx6ulz-bsh-smm-m2.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
@@ -732,6 +755,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-sdb.dtb \
imx7d-sdb-reva.dtb \
imx7d-sdb-sht11.dtb \
+ imx7d-smegw01.dtb \
imx7d-zii-rmu2.dtb \
imx7d-zii-rpu2.dtb \
imx7s-colibri-aster.dtb \
@@ -741,9 +765,14 @@ dtb-$(CONFIG_SOC_IMX7D) += \
dtb-$(CONFIG_SOC_IMX7ULP) += \
imx7ulp-com.dtb \
imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+ imxrt1050-evk.dtb
dtb-$(CONFIG_SOC_LAN966) += \
- lan966x-pcb8291.dtb
+ lan966x-pcb8291.dtb \
+ lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+ lan966x-kontron-kswitch-d10-mmt-8g.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
+ ls1021a-iot.dtb \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
ls1021a-tsn.dtb \
@@ -977,11 +1006,12 @@ dtb-$(CONFIG_ARCH_OXNAS) += \
ox820-cloudengines-pogoplug-series-3.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8016-sbc.dtb \
+ qcom-apq8026-asus-sparrow.dtb \
qcom-apq8026-lg-lenok.dtb \
qcom-apq8060-dragonboard.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
- qcom-apq8064-sony-xperia-yuga.dtb \
+ qcom-apq8064-sony-xperia-lagan-yuga.dtb \
qcom-apq8064-asus-nexus7-flo.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
@@ -1000,12 +1030,12 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8916-samsung-serranove.dtb \
qcom-msm8960-cdp.dtb \
- qcom-msm8974-fairphone-fp2.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
- qcom-msm8974-samsung-klte.dtb \
- qcom-msm8974-sony-xperia-amami.dtb \
- qcom-msm8974-sony-xperia-castor.dtb \
- qcom-msm8974-sony-xperia-honami.dtb \
+ qcom-msm8974-sony-xperia-rhine-amami.dtb \
+ qcom-msm8974-sony-xperia-rhine-honami.dtb \
+ qcom-msm8974pro-fairphone-fp2.dtb \
+ qcom-msm8974pro-samsung-klte.dtb \
+ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \
qcom-sdx55-mtp.dtb \
qcom-sdx55-t55.dtb \
@@ -1156,10 +1186,14 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32h743i-disco.dtb \
stm32h750i-art-pi.dtb \
stm32mp135f-dk.dtb \
+ stm32mp151a-prtt1a.dtb \
+ stm32mp151a-prtt1c.dtb \
+ stm32mp151a-prtt1s.dtb \
stm32mp153c-dhcom-drc02.dtb \
stm32mp157a-avenger96.dtb \
stm32mp157a-dhcor-avenger96.dtb \
stm32mp157a-dk1.dtb \
+ stm32mp157a-dk1-scmi.dtb \
stm32mp157a-iot-box.dtb \
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
@@ -1170,9 +1204,12 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32mp157c-dhcom-pdk2.dtb \
stm32mp157c-dhcom-picoitx.dtb \
stm32mp157c-dk2.dtb \
+ stm32mp157c-dk2-scmi.dtb \
stm32mp157c-ed1.dtb \
+ stm32mp157c-ed1-scmi.dtb \
stm32mp157c-emsbc-argon.dtb \
stm32mp157c-ev1.dtb \
+ stm32mp157c-ev1-scmi.dtb \
stm32mp157c-lxa-mc1.dtb \
stm32mp157c-odyssey.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
@@ -1382,6 +1419,7 @@ dtb-$(CONFIG_ARCH_U8500) += \
ste-ux500-samsung-janice.dtb \
ste-ux500-samsung-gavini.dtb \
ste-ux500-samsung-codina.dtb \
+ ste-ux500-samsung-codina-tmo.dtb \
ste-ux500-samsung-skomer.dtb \
ste-ux500-samsung-kyle.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 366702630290..d3eafee79a23 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -285,7 +285,7 @@
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1312500>;
+ regulator-max-microvolt = <1351500>;
regulator-boot-on;
regulator-always-on;
};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 56ae5095a5b8..02e04a12a270 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -405,3 +405,7 @@
&pruss_tm {
status = "okay";
};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-bone-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 659e99eabe66..b9745a2f0e4d 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -782,3 +782,7 @@
&pruss_tm {
status = "okay";
};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index a2db65538e51..9c458e5a95b7 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -719,3 +719,7 @@
&pruss_tm {
status = "okay";
};
+
+&wkup_m3_ipc {
+ firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 1918766c1f80..1a7e187b1953 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -29,39 +29,44 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- gpio_keys {
+ guardian_buttons: gpio-keys {
+ pinctrl-names = "default";
+ pinctrl-0 = <&guardian_button_pins>;
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pins>;
- button21 {
+ select-button {
+ label = "guardian-select-button";
+ linux,code = <KEY_5>;
+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ };
+
+ power-button {
label = "guardian-power-button";
linux,code = <KEY_POWER>;
- gpios = <&gpio2 21 0>;
+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
- leds {
- compatible = "gpio-leds";
+ guardian_leds: gpio-leds {
pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
+ pinctrl-0 = <&guardian_led_pins>;
+ compatible = "gpio-leds";
- led1 {
- label = "green:heartbeat";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ life-led {
+ label = "guardian:life-led";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
+ };
- led2 {
- label = "green:mmc0";
- gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
};
panel {
@@ -100,20 +105,36 @@
};
- pwm7: dmtimer-pwm {
+ guardian_beeper: dmtimer-pwm@7 {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer7>;
pinctrl-names = "default";
- pinctrl-0 = <&dmtimer7_pins>;
+ pinctrl-0 = <&guardian_beeper_pins>;
ti,clock-source = <0x01>;
};
- vmmcsd_fixed: regulator-3v3 {
+ vmmcsd_fixed: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ mt_keypad: mt_keypad@0 {
+ compatible = "gpio-mt-keypad";
+ debounce-delay-ms = <10>;
+ col-scan-delay-us = <2>;
+ keypad,num-lines = <5>;
+ linux,no-autorepeat;
+ gpio-activelow;
+ line-gpios = <
+ &gpio1 24 GPIO_ACTIVE_LOW /*gpio_56*/
+ &gpio1 23 GPIO_ACTIVE_LOW /*gpio_55*/
+ &gpio1 22 GPIO_ACTIVE_LOW /*gpio_54*/
+ &gpio1 20 GPIO_ACTIVE_LOW /*gpio_52*/
+ &gpio1 16 GPIO_ACTIVE_LOW /*gpio_48*/
+ >;
+ };
};
&elm {
@@ -133,28 +154,29 @@
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+ ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
+ gpmc,cs-rd-off-ns = <30>;
+ gpmc,cs-wr-off-ns = <30>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <30>;
+ gpmc,adv-wr-off-ns = <30>;
gpmc,we-on-ns = <0>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-on-ns = <0>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
+ gpmc,we-off-ns = <15>;
+ gpmc,oe-on-ns = <1>;
+ gpmc,oe-off-ns = <15>;
+ gpmc,access-ns = <30>;
+ gpmc,rd-cycle-ns = <30>;
+ gpmc,wr-cycle-ns = <30>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
- gpmc,wr-access-ns = <40>;
+ gpmc,wr-access-ns = <0>;
gpmc,wr-data-mux-bus-ns = <0>;
/*
@@ -198,18 +220,33 @@
};
partition@6 {
- label = "u-boot-env";
- reg = <0x300000 0x40000>;
+ label = "u-boot-2";
+ reg = <0x300000 0x100000>;
};
partition@7 {
- label = "u-boot-env.backup1";
- reg = <0x340000 0x40000>;
+ label = "u-boot-2.backup1";
+ reg = <0x400000 0x100000>;
};
partition@8 {
+ label = "u-boot-env";
+ reg = <0x500000 0x40000>;
+ };
+
+ partition@9 {
+ label = "u-boot-env.backup1";
+ reg = <0x540000 0x40000>;
+ };
+
+ partition@10 {
+ label = "splash-screen";
+ reg = <0x580000 0x40000>;
+ };
+
+ partition@11 {
label = "UBI";
- reg = <0x380000 0x1fc80000>;
+ reg = <0x5c0000 0x1fa40000>;
};
};
};
@@ -228,6 +265,11 @@
&lcdc {
blue-and-red-wiring = "crossed";
status = "okay";
+ port {
+ lcdc_0: endpoint@0 {
+ remote-endpoint = <0>;
+ };
+ };
};
&mmc1 {
@@ -242,7 +284,6 @@
&rtc {
clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
clock-names = "ext-clk", "int-clk";
- system-power-controller;
};
&spi0 {
@@ -255,14 +296,34 @@
#include "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
ti,pmic-shutdown-controller;
interrupt-parent = <&intc>;
interrupts = <7>; /* NMI */
backlight {
isel = <1>; /* 1 - ISET1, 2 ISET2 */
- fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
- default-brightness = <100>;
+ fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+ default-brightness = <50>;
+ /* 1(on) - enable current sink, while initialization */
+ /* 0(off) - disable current sink, while initialization */
+ isink-en = <1>;
};
regulators {
@@ -272,6 +333,7 @@
};
dcdc2_reg: regulator@1 {
+ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1351500>;
@@ -280,6 +342,7 @@
};
dcdc3_reg: regulator@2 {
+ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
regulator-max-microvolt = <1150000>;
@@ -319,171 +382,364 @@
};
};
+&gpio0 {
+ gpio-line-names =
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "MirxWakeup",
+ "",
+ "";
+};
+
+&gpio3 {
+ ti,gpio-always-on;
+ ti,no-reset-on-init;
+ gpio-line-names =
+ "",
+ "MirxBtReset",
+ "",
+ "CcVolAdcEn",
+ "MirxBlePause",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AspEn",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BatVolAdcEn",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
&usb0 {
dr_mode = "peripheral";
};
&usb1 {
dr_mode = "host";
+ /delete-property/dmas;
+ /delete-property/dma-names;
};
&am33xx_pinmux {
pinctrl-names = "default";
- pinctrl-0 = <&clkout2_pin &gpio_pins>;
+ pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
+ /* xdma_event_intr1.clkout2 */
AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
>;
};
- dmtimer7_pins: pinmux_dmtimer7_pins {
+ guardian_interface_pins: pinmux_interface_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
+ /* ADC_BATSENSE_EN */
+ /* (A14) MCASP0_AHCLKx.gpio3[21] */
+ AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ADC_COINCELL_EN */
+ /* (J16) MII1_TX_EN.gpio3[3] */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* ASP_ENABLE */
+ /* (A13) MCASP0_ACLKx.gpio3[14] */
+ AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* (D16) uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+ /* (D15) uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+ /*SWITCH-OFF_3V6*/
+ /* (M18) gpio0[1] */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ /* MIRACULIX */
+ /* (H17) gmii1_crs.gpio3[1] */
+ AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (H18) rmii1_refclk.gpio0[29] */
+ AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+ /* (J18) gmii1_txd3.gpio0[16] */
+ AM33XX_IOPAD(0x91c, PIN_INPUT | MUX_MODE7 )
+ /* (J17) gmii1_rxdv.gpio3[4] */
+ AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
>;
};
- gpio_keys_pins: pinmux_gpio_keys_pins {
+ guardian_beeper_pins: pinmux_dmtimer7_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
>;
};
- gpio_pins: pinmux_gpio_pins {
+ guardian_button_pins: pinmux_guardian_button_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+ AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9) gpmc_csn2.gpio1[31] */
>;
};
+
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ led_bl_pins: gpio_led_bl_pins {
+ pinctrl-single,pins = <
+ /* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
>;
};
lcd_disen_pins: pinmux_lcd_disen_pins {
pinctrl-single,pins = <
+ /* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
>;
};
lcd_pins_default: pinmux_lcd_pins_default {
pinctrl-single,pins = <
+ /* (U10) gpmc_ad8.lcd_data23 */
AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T10) gpmc_ad9.lcd_data22 */
AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T11) gpmc_ad10.lcd_data21 */
AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U12) gpmc_ad11.lcd_data20 */
AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (T12) gpmc_ad12.lcd_data19 */
AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (R12) gpmc_ad13.lcd_data18 */
AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (V13) gpmc_ad14.lcd_data17 */
AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* (U13) gpmc_ad15.lcd_data16 */
AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+ /* lcd_data0.lcd_data0 */
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data1.lcd_data1 */
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data2.lcd_data2 */
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data3.lcd_data3 */
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data4.lcd_data4 */
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data5.lcd_data5 */
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data6.lcd_data6 */
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data7.lcd_data7 */
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data8.lcd_data8 */
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data9.lcd_data9 */
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data10.lcd_data10 */
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data11.lcd_data11 */
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data12.lcd_data12 */
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data13.lcd_data13 */
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data14.lcd_data14 */
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_data15.lcd_data15 */
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_vsync.lcd_vsync */
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_hsync.lcd_hsync */
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_pclk.lcd_pclk */
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
>;
};
lcd_pins_sleep: pinmux_lcd_pins_sleep {
pinctrl-single,pins = <
+ /* lcd_data0.lcd_data0 */
AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data1.lcd_data1 */
AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data2.lcd_data2 */
AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data3.lcd_data3 */
AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data4.lcd_data4 */
AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data5.lcd_data5 */
AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data6.lcd_data6 */
AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data7.lcd_data7 */
AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data8.lcd_data8 */
AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data9.lcd_data9 */
AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data10.lcd_data10 */
AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data11.lcd_data11 */
AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data12.lcd_data12 */
AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data13.lcd_data13 */
AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data14.lcd_data14 */
AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_data15.lcd_data15 */
AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_vsync.lcd_vsync */
AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_hsync.lcd_hsync */
AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_pclk.lcd_pclk */
AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+ /* lcd_ac_bias_en.lcd_ac_bias_en */
AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
>;
};
- leds_pins: pinmux_leds_pins {
+ guardian_led_pins: pinmux_guardian_led_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
- AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
- AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
>;
};
spi0_pins: pinmux_spi0_pins {
pinctrl-single,pins = <
+ /* SPI0_CLK - spi0_clk.spi */
AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ /* SPI0_MOSI - spi0_d0.spi0 */
AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ /* SPI0_MISO - spi0_d1.spi0 */
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* SPI0_CS0 - spi */
AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
+ /* uart0_rxd.uart0_rxd */
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart0_txd.uart0_txd */
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
>;
};
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ /* K18 uart2_rxd.mirx_txd */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+ /* L18 uart2_txd.mirx_rxd */
+ AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+ >;
+ };
+
nandflash_pins: pinmux_nandflash_pins {
pinctrl-single,pins = <
+ /* (U7) gpmc_ad0.gpmc_ad0 */
AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+ /* (V7) gpmc_ad1.gpmc_ad1 */
AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+ /* (R8) gpmc_ad2.gpmc_ad2 */
AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+ /* (T8) gpmc_ad3.gpmc_ad3 */
AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+ /* (U8) gpmc_ad4.gpmc_ad4 */
AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+ /* (V8) gpmc_ad5.gpmc_ad5 */
AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+ /* (R9) gpmc_ad6.gpmc_ad6 */
AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+ /* (T9) gpmc_ad7.gpmc_ad7 */
AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+ /* (T17) gpmc_wait0.gpmc_wait0 */
AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+ /* (U17) gpmc_wpn.gpmc_wpn */
AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+ /* (V6) gpmc_csn0.gpmc_csn0 */
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ /* (R7) gpmc_advn_ale.gpmc_advn_ale */
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ /* (T7) gpmc_oen_ren.gpmc_oen_ren */
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ /* (U6) gpmc_wen.gpmc_wen */
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ /* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
>;
};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 11e8f64b6606..92a0e98ec231 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -182,7 +182,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- m25p80@0 {
+ flash@0 {
compatible = "mx25l6405d";
spi-max-frequency = <40000000>;
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
index a7269b90d795..e7e439a0630a 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -394,7 +394,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- m25p80@0 {
+ flash@0 {
compatible = "mx25l6405d";
spi-max-frequency = <40000000>;
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
index 245c35f41cdf..6eea18b29355 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -27,6 +27,13 @@
reg = <0x80000000 0x10000000>;
};
+ clk32k: clk32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+
+ #clock-cells = <0>;
+ };
+
vdd_mod: vdd_mod_reg {
compatible = "regulator-fixed";
regulator-name = "vdd-mod";
@@ -124,9 +131,6 @@
gpmc,wr-data-mux-bus-ns = <0>;
ti,elm-id = <&elm>;
ti,nand-ecc-opt = "bch8";
-
- #address-cells = <1>;
- #size-cells = <1>;
};
};
@@ -149,6 +153,8 @@
};
&rtc {
+ clocks = <&clk32k>;
+ clock-names = "ext-clk";
system-power-controller;
};
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
index 1479fd95dec2..9d81d4cc6890 100644
--- a/arch/arm/boot/dts/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -227,14 +227,20 @@
};
&nand0 {
- partition@0 {
- label = "MLO";
- reg = <0x00000 0x20000>;
- };
+ nand_parts: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@20000 {
- label = "boot";
- reg = <0x20000 0x80000>;
+ partition@0 {
+ label = "MLO";
+ reg = <0x00000 0x20000>;
+ };
+
+ partition@80000 {
+ label = "boot";
+ reg = <0x80000 0x100000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index f65cd1331315..e2cec1ffaa4c 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -331,7 +331,7 @@
pinctrl-0 = <&spi0_pins>;
status = "okay";
- serial_flash: m25p80@0 {
+ serial_flash: flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <48000000>;
reg = <0x0>;
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 6516907ed579..73b5d1a024bd 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -588,7 +588,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
- flash: n25q032@1 {
+ flash: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q032";
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index b7b7106f2dee..d34483ae1778 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -5,251 +5,288 @@
* Copyright (C) 2013 Texas Instruments, Inc.
*/
&scm_clocks {
- sys_clkin_ck: sys_clkin_ck@40 {
+ sys_clkin_ck: clock-sys-clkin-22@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
ti,bit-shift = <22>;
reg = <0x0040>;
};
- adc_tsc_fck: adc_tsc_fck {
+ adc_tsc_fck: clock-adc-tsc-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "adc_tsc_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dcan0_fck: dcan0_fck {
+ dcan0_fck: clock-dcan0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dcan0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dcan1_fck: dcan1_fck {
+ dcan1_fck: clock-dcan1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dcan1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- mcasp0_fck: mcasp0_fck {
+ mcasp0_fck: clock-mcasp0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- mcasp1_fck: mcasp1_fck {
+ mcasp1_fck: clock-mcasp1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- smartreflex0_fck: smartreflex0_fck {
+ smartreflex0_fck: clock-smartreflex0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- smartreflex1_fck: smartreflex1_fck {
+ smartreflex1_fck: clock-smartreflex1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- sha0_fck: sha0_fck {
+ sha0_fck: clock-sha0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "sha0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- aes0_fck: aes0_fck {
+ aes0_fck: clock-aes0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "aes0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- rng_fck: rng_fck {
+ rng_fck: clock-rng-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "rng_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&l4ls_gclk>;
- ti,bit-shift = <0>;
- reg = <0x0664>;
- };
+ clock@664 {
+ compatible = "ti,clksel";
+ reg = <0x664>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&l4ls_gclk>;
- ti,bit-shift = <1>;
- reg = <0x0664>;
- };
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <0>;
+ };
- ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&l4ls_gclk>;
- ti,bit-shift = <2>;
- reg = <0x0664>;
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <1>;
+ };
+
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
+ clocks = <&l4ls_gclk>;
+ ti,bit-shift = <2>;
+ };
};
};
&prcm_clocks {
- clk_32768_ck: clk_32768_ck {
+ clk_32768_ck: clock-clk-32768 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_32768_ck";
clock-frequency = <32768>;
};
- clk_rc32k_ck: clk_rc32k_ck {
+ clk_rc32k_ck: clock-clk-rc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_rc32k_ck";
clock-frequency = <32000>;
};
- virt_19200000_ck: virt_19200000_ck {
+ virt_19200000_ck: clock-virt-19200000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
clock-frequency = <19200000>;
};
- virt_24000000_ck: virt_24000000_ck {
+ virt_24000000_ck: clock-virt-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_24000000_ck";
clock-frequency = <24000000>;
};
- virt_25000000_ck: virt_25000000_ck {
+ virt_25000000_ck: clock-virt-25000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_25000000_ck";
clock-frequency = <25000000>;
};
- virt_26000000_ck: virt_26000000_ck {
+ virt_26000000_ck: clock-virt-26000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
clock-frequency = <26000000>;
};
- tclkin_ck: tclkin_ck {
+ tclkin_ck: clock-tclkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "tclkin_ck";
clock-frequency = <12000000>;
};
- dpll_core_ck: dpll_core_ck@490 {
+ dpll_core_ck: clock@490 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
};
- dpll_core_x2_ck: dpll_core_x2_ck {
+ dpll_core_x2_ck: clock-dpll-core-x2 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
clocks = <&dpll_core_ck>;
};
- dpll_core_m4_ck: dpll_core_m4_ck@480 {
+ dpll_core_m4_ck: clock-dpll-core-m4@480 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
reg = <0x0480>;
ti,index-starts-at-one;
};
- dpll_core_m5_ck: dpll_core_m5_ck@484 {
+ dpll_core_m5_ck: clock-dpll-core-m5@484 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
reg = <0x0484>;
ti,index-starts-at-one;
};
- dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
+ dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
reg = <0x04d8>;
ti,index-starts-at-one;
};
- dpll_mpu_ck: dpll_mpu_ck@488 {
+ dpll_mpu_ck: clock@488 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
};
- dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
clocks = <&dpll_mpu_ck>;
ti,max-div = <31>;
reg = <0x04a8>;
ti,index-starts-at-one;
};
- dpll_ddr_ck: dpll_ddr_ck@494 {
+ dpll_ddr_ck: clock@494 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
+ clock-output-names = "dpll_ddr_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
};
- dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
clocks = <&dpll_ddr_ck>;
ti,max-div = <31>;
reg = <0x04a0>;
ti,index-starts-at-one;
};
- dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+ dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_ddr_m2_div2_ck";
clocks = <&dpll_ddr_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- dpll_disp_ck: dpll_disp_ck@498 {
+ dpll_disp_ck: clock@498 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-clock";
+ clock-output-names = "dpll_disp_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
};
- dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
+ dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_disp_m2_ck";
clocks = <&dpll_disp_ck>;
ti,max-div = <31>;
reg = <0x04a4>;
@@ -257,418 +294,484 @@
ti,set-rate-parent;
};
- dpll_per_ck: dpll_per_ck@48c {
+ dpll_per_ck: clock@48c {
#clock-cells = <0>;
compatible = "ti,am3-dpll-no-gate-j-type-clock";
+ clock-output-names = "dpll_per_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
};
- dpll_per_m2_ck: dpll_per_m2_ck@4ac {
+ dpll_per_m2_ck: clock-dpll-per-m2@4ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
clocks = <&dpll_per_ck>;
ti,max-div = <31>;
reg = <0x04ac>;
ti,index-starts-at-one;
};
- dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+ dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+ dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_ck";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- clk_24mhz: clk_24mhz {
+ clk_24mhz: clock-clk-24mhz {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "clk_24mhz";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <8>;
};
- clkdiv32k_ck: clkdiv32k_ck {
+ clkdiv32k_ck: clock-clkdiv32k {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "clkdiv32k_ck";
clocks = <&clk_24mhz>;
clock-mult = <1>;
clock-div = <732>;
};
- l3_gclk: l3_gclk {
+ l3_gclk: clock-l3-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l3_gclk";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- pruss_ocp_gclk: pruss_ocp_gclk@530 {
+ pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "pruss_ocp_gclk";
clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
reg = <0x0530>;
};
- mmu_fck: mmu_fck@914 {
+ mmu_fck: clock-mmu-fck-1@914 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "mmu_fck";
clocks = <&dpll_core_m4_ck>;
ti,bit-shift = <1>;
reg = <0x0914>;
};
- timer1_fck: timer1_fck@528 {
+ timer1_fck: clock-timer1-fck@528 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer1_fck";
clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
reg = <0x0528>;
};
- timer2_fck: timer2_fck@508 {
+ timer2_fck: clock-timer2-fck@508 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer2_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x0508>;
};
- timer3_fck: timer3_fck@50c {
+ timer3_fck: clock-timer3-fck@50c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer3_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x050c>;
};
- timer4_fck: timer4_fck@510 {
+ timer4_fck: clock-timer4-fck@510 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer4_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x0510>;
};
- timer5_fck: timer5_fck@518 {
+ timer5_fck: clock-timer5-fck@518 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer5_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x0518>;
};
- timer6_fck: timer6_fck@51c {
+ timer6_fck: clock-timer6-fck@51c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer6_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x051c>;
};
- timer7_fck: timer7_fck@504 {
+ timer7_fck: clock-timer7-fck@504 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer7_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x0504>;
};
- usbotg_fck: usbotg_fck@47c {
+ usbotg_fck: clock-usbotg-fck-8@47c {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usbotg_fck";
clocks = <&dpll_per_ck>;
ti,bit-shift = <8>;
reg = <0x047c>;
};
- dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+ dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_core_m4_div2_ck";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- ieee5000_fck: ieee5000_fck@e4 {
+ ieee5000_fck: clock-ieee5000-fck-1@e4 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ieee5000_fck";
clocks = <&dpll_core_m4_div2_ck>;
ti,bit-shift = <1>;
reg = <0x00e4>;
};
- wdt1_fck: wdt1_fck@538 {
+ wdt1_fck: clock-wdt1-fck@538 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "wdt1_fck";
clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x0538>;
};
- l4_rtc_gclk: l4_rtc_gclk {
+ l4_rtc_gclk: clock-l4-rtc-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4_rtc_gclk";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- l4hs_gclk: l4hs_gclk {
+ l4hs_gclk: clock-l4hs-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4hs_gclk";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l3s_gclk: l3s_gclk {
+ l3s_gclk: clock-l3s-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l3s_gclk";
clocks = <&dpll_core_m4_div2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l4fw_gclk: l4fw_gclk {
+ l4fw_gclk: clock-l4fw-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4fw_gclk";
clocks = <&dpll_core_m4_div2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l4ls_gclk: l4ls_gclk {
+ l4ls_gclk: clock-l4ls-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4ls_gclk";
clocks = <&dpll_core_m4_div2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- sysclk_div_ck: sysclk_div_ck {
+ sysclk_div_ck: clock-sysclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "sysclk_div_ck";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+ cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_125mhz_gclk";
clocks = <&dpll_core_m5_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
+ cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "cpsw_cpts_rft_clk";
clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
reg = <0x0520>;
};
- gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
+ gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpio0_dbclk_mux_ck";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
reg = <0x053c>;
};
- lcd_gclk: lcd_gclk@534 {
+ lcd_gclk: clock-lcd-gclk@534 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "lcd_gclk";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
reg = <0x0534>;
ti,set-rate-parent;
};
- mmc_clk: mmc_clk {
+ mmc_clk: clock-mmc {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mmc_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
- ti,bit-shift = <1>;
- reg = <0x052c>;
- };
+ clock@52c {
+ compatible = "ti,clksel";
+ reg = <0x52c>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- gfx_fck_div_ck: gfx_fck_div_ck@52c {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&gfx_fclk_clksel_ck>;
- reg = <0x052c>;
- ti,max-div = <2>;
- };
+ gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "gfx_fclk_clksel_ck";
+ clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+ ti,bit-shift = <1>;
+ };
- sysclkout_pre_ck: sysclkout_pre_ck@700 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
- reg = <0x0700>;
+ gfx_fck_div_ck: clock-gfx-fck-div {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "gfx_fck_div_ck";
+ clocks = <&gfx_fclk_clksel_ck>;
+ ti,max-div = <2>;
+ };
};
- clkout2_div_ck: clkout2_div_ck@700 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&sysclkout_pre_ck>;
- ti,bit-shift = <3>;
- ti,max-div = <8>;
- reg = <0x0700>;
- };
+ clock@700 {
+ compatible = "ti,clksel";
+ reg = <0x700>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- clkout2_ck: clkout2_ck@700 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&clkout2_div_ck>;
- ti,bit-shift = <7>;
- reg = <0x0700>;
+ sysclkout_pre_ck: clock-sysclkout-pre {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "sysclkout_pre_ck";
+ clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+ };
+
+ clkout2_div_ck: clock-clkout2-div {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "clkout2_div_ck";
+ clocks = <&sysclkout_pre_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <8>;
+ };
+
+ clkout2_ck: clock-clkout2 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "clkout2_ck";
+ clocks = <&clkout2_div_ck>;
+ ti,bit-shift = <7>;
+ };
};
};
&prcm {
- per_cm: per-cm@0 {
+ per_cm: clock@0 {
compatible = "ti,omap4-cm";
+ clock-output-names = "per_cm";
reg = <0x0 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x400>;
- l4ls_clkctrl: l4ls-clkctrl@38 {
+ l4ls_clkctrl: clock@38 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4ls_clkctrl";
reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
#clock-cells = <2>;
};
- l3s_clkctrl: l3s-clkctrl@1c {
+ l3s_clkctrl: clock@1c {
compatible = "ti,clkctrl";
+ clock-output-names = "l3s_clkctrl";
reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
#clock-cells = <2>;
};
- l3_clkctrl: l3-clkctrl@24 {
+ l3_clkctrl: clock@24 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_clkctrl";
reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
#clock-cells = <2>;
};
- l4hs_clkctrl: l4hs-clkctrl@120 {
+ l4hs_clkctrl: clock@120 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4hs_clkctrl";
reg = <0x120 0x4>;
#clock-cells = <2>;
};
- pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
+ pruss_ocp_clkctrl: clock@e8 {
compatible = "ti,clkctrl";
+ clock-output-names = "pruss_ocp_clkctrl";
reg = <0xe8 0x4>;
#clock-cells = <2>;
};
- cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
+ cpsw_125mhz_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "cpsw_125mhz_clkctrl";
reg = <0x0 0x18>;
#clock-cells = <2>;
};
- lcdc_clkctrl: lcdc-clkctrl@18 {
+ lcdc_clkctrl: clock@18 {
compatible = "ti,clkctrl";
+ clock-output-names = "lcdc_clkctrl";
reg = <0x18 0x4>;
#clock-cells = <2>;
};
- clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
+ clk_24mhz_clkctrl: clock@14c {
compatible = "ti,clkctrl";
+ clock-output-names = "clk_24mhz_clkctrl";
reg = <0x14c 0x4>;
#clock-cells = <2>;
};
};
- wkup_cm: wkup-cm@400 {
+ wkup_cm: clock@400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "wkup_cm";
reg = <0x400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x400 0x100>;
- l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
+ l4_wkup_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
reg = <0x0 0x10>, <0xb4 0x24>;
#clock-cells = <2>;
};
- l3_aon_clkctrl: l3-aon-clkctrl@14 {
+ l3_aon_clkctrl: clock@14 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_aon_clkctrl";
reg = <0x14 0x4>;
#clock-cells = <2>;
};
- l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
+ l4_wkup_aon_clkctrl: clock@b0 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_aon_clkctrl";
reg = <0xb0 0x4>;
#clock-cells = <2>;
};
};
- mpu_cm: mpu-cm@600 {
+ mpu_cm: clock@600 {
compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
reg = <0x600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x100>;
- mpu_clkctrl: mpu-clkctrl@0 {
+ mpu_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
reg = <0x0 0x8>;
#clock-cells = <2>;
};
};
- l4_rtc_cm: l4-rtc-cm@800 {
+ l4_rtc_cm: clock@800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_rtc_cm";
reg = <0x800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x800 0x100>;
- l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
+ l4_rtc_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_rtc_clkctrl";
reg = <0x0 0x4>;
#clock-cells = <2>;
};
};
- gfx_l3_cm: gfx-l3-cm@900 {
+ gfx_l3_cm: clock@900 {
compatible = "ti,omap4-cm";
+ clock-output-names = "gfx_l3_cm";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x900 0x100>;
- gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
+ gfx_l3_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "gfx_l3_clkctrl";
reg = <0x0 0x8>;
#clock-cells = <2>;
};
};
- l4_cefuse_cm: l4-cefuse-cm@a00 {
+ l4_cefuse_cm: clock@a00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_cefuse_cm";
reg = <0xa00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xa00 0x100>;
- l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
+ l4_cefuse_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_cefuse_clkctrl";
reg = <0x0 0x24>;
#clock-cells = <2>;
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index f6ec85d58dd1..9a8698bd2852 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -461,8 +461,11 @@
interrupts = <17>;
interrupt-names = "glue";
#dma-cells = <2>;
+ /* For backwards compatibility: */
#dma-channels = <30>;
+ dma-channels = <30>;
#dma-requests = <256>;
+ dma-requests = <256>;
};
};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 220d0a52797e..0ee7afaa0e8e 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -62,12 +62,27 @@
};
};
&cm_clocks {
- ipss_ick: ipss_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,am35xx-interface-clock";
- clocks = <&core_l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <4>;
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ipss_ick: clock-ipss-ick {
+ #clock-cells = <0>;
+ compatible = "ti,am35xx-interface-clock";
+ clock-output-names = "ipss_ick";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ uart4_ick_am35xx: clock-uart4-ick-am35xx {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart4_ick_am35xx";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <23>;
+ };
};
rmii_ck: rmii_ck {
@@ -82,20 +97,19 @@
clock-frequency = <27000000>;
};
- uart4_ick_am35xx: uart4_ick_am35xx@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <23>;
- };
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- uart4_fck_am35xx: uart4_fck_am35xx@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <23>;
+ uart4_fck_am35xx: clock-uart4-fck-am35xx {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart4_fck_am35xx";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <23>;
+ };
};
};
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 9423e9feaa10..c9323d1df303 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -434,7 +434,7 @@
};
&mcspi1 {
- s25fl256@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 3e3354780db8..0861e868b75a 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -302,7 +302,7 @@
&edma 17 0>;
dma-names = "tx0", "rx0";
- flash: w25q64cvzpig@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 4416ddb559e4..46d5361fe876 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1127,6 +1127,11 @@
cpu0-supply = <&dcdc2>;
};
+&wkup_m3_ipc {
+ ti,set-io-isolation;
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
&pruss1_mdio {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 53f64e3ce735..5a74b83145cf 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -437,7 +437,7 @@
pinctrl-1 = <&qspi_pins_sleep>;
spi-max-frequency = <48000000>;
- m25p80@0 {
+ flash@0 {
compatible = "mx66l51235l";
spi-max-frequency = <48000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 20a34d2d85df..036f3831dc26 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -746,7 +746,7 @@
pinctrl-0 = <&qspi_pins>;
spi-max-frequency = <48000000>;
- m25p80@0 {
+ flash@0 {
compatible = "mx66l51235l";
spi-max-frequency = <48000000>;
reg = <0>;
@@ -893,6 +893,10 @@
};
};
+&wkup_m3_ipc {
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
&pruss1_mdio {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 4f9a7251a107..27f4ce855549 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -902,7 +902,7 @@
pinctrl-1 = <&qspi1_pins_sleep>;
spi-max-frequency = <48000000>;
- m25p80@0 {
+ flash@0 {
compatible = "mx66l51235l";
spi-max-frequency = <48000000>;
reg = <0>;
@@ -1019,6 +1019,10 @@
cpu0-supply = <&dcdc2>;
};
+&wkup_m3_ipc {
+ firmware-name = "am43x-evm-scale-data.bin";
+};
+
&pruss1_mdio {
status = "disabled";
};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index 66e892fa3398..9a5437b3d6a8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -5,217 +5,246 @@
* Copyright (C) 2013 Texas Instruments, Inc.
*/
&scm_clocks {
- sys_clkin_ck: sys_clkin_ck@40 {
+ sys_clkin_ck: clock-sys-clkin-31@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
ti,bit-shift = <31>;
reg = <0x0040>;
};
- crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
+ crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "crystal_freq_sel_ck";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
ti,bit-shift = <29>;
reg = <0x0040>;
};
- sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+ sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sysboot_freq_sel_ck";
clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
ti,bit-shift = <22>;
reg = <0x0040>;
};
- adc_tsc_fck: adc_tsc_fck {
+ adc_tsc_fck: clock-adc-tsc-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "adc_tsc_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dcan0_fck: dcan0_fck {
+ dcan0_fck: clock-dcan0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dcan0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dcan1_fck: dcan1_fck {
+ dcan1_fck: clock-dcan1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dcan1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- mcasp0_fck: mcasp0_fck {
+ mcasp0_fck: clock-mcasp0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- mcasp1_fck: mcasp1_fck {
+ mcasp1_fck: clock-mcasp1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mcasp1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- smartreflex0_fck: smartreflex0_fck {
+ smartreflex0_fck: clock-smartreflex0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- smartreflex1_fck: smartreflex1_fck {
+ smartreflex1_fck: clock-smartreflex1-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "smartreflex1_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- sha0_fck: sha0_fck {
+ sha0_fck: clock-sha0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "sha0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- aes0_fck: aes0_fck {
+ aes0_fck: clock-aes0-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "aes0_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- rng_fck: rng_fck {
+ rng_fck: clock-rng-fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "rng_fck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <0>;
reg = <0x0664>;
};
- ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <1>;
reg = <0x0664>;
};
- ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <2>;
reg = <0x0664>;
};
- ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
+ ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm3_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <4>;
reg = <0x0664>;
};
- ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
+ ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm4_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <5>;
reg = <0x0664>;
};
- ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
+ ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm5_tbclk";
clocks = <&l4ls_gclk>;
ti,bit-shift = <6>;
reg = <0x0664>;
};
};
&prcm_clocks {
- clk_32768_ck: clk_32768_ck {
+ clk_32768_ck: clock-clk-32768 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_32768_ck";
clock-frequency = <32768>;
};
- clk_rc32k_ck: clk_rc32k_ck {
+ clk_rc32k_ck: clock-clk-rc32k {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_rc32k_ck";
clock-frequency = <32768>;
};
- virt_19200000_ck: virt_19200000_ck {
+ virt_19200000_ck: clock-virt-19200000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
clock-frequency = <19200000>;
};
- virt_24000000_ck: virt_24000000_ck {
+ virt_24000000_ck: clock-virt-24000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_24000000_ck";
clock-frequency = <24000000>;
};
- virt_25000000_ck: virt_25000000_ck {
+ virt_25000000_ck: clock-virt-25000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_25000000_ck";
clock-frequency = <25000000>;
};
- virt_26000000_ck: virt_26000000_ck {
+ virt_26000000_ck: clock-virt-26000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
clock-frequency = <26000000>;
};
- tclkin_ck: tclkin_ck {
+ tclkin_ck: clock-tclkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "tclkin_ck";
clock-frequency = <26000000>;
};
- dpll_core_ck: dpll_core_ck@2d20 {
+ dpll_core_ck: clock@2d20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
};
- dpll_core_x2_ck: dpll_core_x2_ck {
+ dpll_core_x2_ck: clock-dpll-core-x2 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
clocks = <&dpll_core_ck>;
};
- dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
+ dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -224,9 +253,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
+ dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -235,9 +265,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
+ dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -246,16 +277,18 @@
ti,invert-autoidle-bit;
};
- dpll_mpu_ck: dpll_mpu_ck@2d60 {
+ dpll_mpu_ck: clock@2d60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
};
- dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
clocks = <&dpll_mpu_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -264,24 +297,27 @@
ti,invert-autoidle-bit;
};
- mpu_periphclk: mpu_periphclk {
+ mpu_periphclk: clock-mpu-periphclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_periphclk";
clocks = <&dpll_mpu_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- dpll_ddr_ck: dpll_ddr_ck@2da0 {
+ dpll_ddr_ck: clock@2da0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_ddr_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
};
- dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
clocks = <&dpll_ddr_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -290,16 +326,18 @@
ti,invert-autoidle-bit;
};
- dpll_disp_ck: dpll_disp_ck@2e20 {
+ dpll_disp_ck: clock@2e20 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_disp_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
};
- dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
+ dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_disp_m2_ck";
clocks = <&dpll_disp_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -309,16 +347,18 @@
ti,set-rate-parent;
};
- dpll_per_ck: dpll_per_ck@2de0 {
+ dpll_per_ck: clock@2de0 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-j-type-clock";
+ clock-output-names = "dpll_per_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
};
- dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
+ dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
clocks = <&dpll_per_ck>;
ti,max-div = <127>;
ti,autoidle-shift = <8>;
@@ -327,119 +367,135 @@
ti,invert-autoidle-bit;
};
- dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+ dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+ dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_per_m2_div4_ck";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- clk_24mhz: clk_24mhz {
+ clk_24mhz: clock-clk-24mhz {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "clk_24mhz";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <8>;
};
- clkdiv32k_ck: clkdiv32k_ck {
+ clkdiv32k_ck: clock-clkdiv32k {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "clkdiv32k_ck";
clocks = <&clk_24mhz>;
clock-mult = <1>;
clock-div = <732>;
};
- clkdiv32k_ick: clkdiv32k_ick@2a38 {
+ clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "clkdiv32k_ick";
clocks = <&clkdiv32k_ck>;
ti,bit-shift = <8>;
reg = <0x2a38>;
};
- sysclk_div: sysclk_div {
+ sysclk_div: clock-sysclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "sysclk_div";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- pruss_ocp_gclk: pruss_ocp_gclk@4248 {
+ pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "pruss_ocp_gclk";
clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
reg = <0x4248>;
};
- clk_32k_tpm_ck: clk_32k_tpm_ck {
+ clk_32k_tpm_ck: clock-clk-32k-tpm {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_32k_tpm_ck";
clock-frequency = <32768>;
};
- timer1_fck: timer1_fck@4200 {
+ timer1_fck: clock-timer1-fck@4200 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer1_fck";
clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4200>;
};
- timer2_fck: timer2_fck@4204 {
+ timer2_fck: clock-timer2-fck@4204 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer2_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4204>;
};
- timer3_fck: timer3_fck@4208 {
+ timer3_fck: clock-timer3-fck@4208 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer3_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4208>;
};
- timer4_fck: timer4_fck@420c {
+ timer4_fck: clock-timer4-fck@420c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer4_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x420c>;
};
- timer5_fck: timer5_fck@4210 {
+ timer5_fck: clock-timer5-fck@4210 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer5_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4210>;
};
- timer6_fck: timer6_fck@4214 {
+ timer6_fck: clock-timer6-fck@4214 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer6_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4214>;
};
- timer7_fck: timer7_fck@4218 {
+ timer7_fck: clock-timer7-fck@4218 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer7_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
reg = <0x4218>;
};
- wdt1_fck: wdt1_fck@422c {
+ wdt1_fck: clock-wdt1-fck@422c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "wdt1_fck";
clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
reg = <0x422c>;
};
@@ -451,125 +507,141 @@
reg = <0x424c>;
};
- l3_gclk: l3_gclk {
+ l3_gclk: clock-l3-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l3_gclk";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+ dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_core_m4_div2_ck";
clocks = <&sysclk_div>;
clock-mult = <1>;
clock-div = <2>;
};
- l4hs_gclk: l4hs_gclk {
+ l4hs_gclk: clock-l4hs-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4hs_gclk";
clocks = <&dpll_core_m4_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l3s_gclk: l3s_gclk {
+ l3s_gclk: clock-l3s-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l3s_gclk";
clocks = <&dpll_core_m4_div2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l4ls_gclk: l4ls_gclk {
+ l4ls_gclk: clock-l4ls-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4ls_gclk";
clocks = <&dpll_core_m4_div2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+ cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_125mhz_gclk";
clocks = <&dpll_core_m5_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
+ cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "cpsw_cpts_rft_clk";
clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
reg = <0x4238>;
};
- dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
+ dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_clksel_mac_clk";
clocks = <&dpll_core_m5_ck>;
reg = <0x4234>;
ti,bit-shift = <2>;
ti,dividers = <2>, <5>;
};
- clk_32k_mosc_ck: clk_32k_mosc_ck {
+ clk_32k_mosc_ck: clock-clk-32k-mosc {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "clk_32k_mosc_ck";
clock-frequency = <32768>;
};
- gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
+ gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpio0_dbclk_mux_ck";
clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
reg = <0x4240>;
};
- mmc_clk: mmc_clk {
+ mmc_clk: clock-mmc {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mmc_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
+ gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gfx_fclk_clksel_ck";
clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
ti,bit-shift = <1>;
reg = <0x423c>;
};
- gfx_fck_div_ck: gfx_fck_div_ck@423c {
+ gfx_fck_div_ck: clock-gfx-fck-div@423c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "gfx_fck_div_ck";
clocks = <&gfx_fclk_clksel_ck>;
reg = <0x423c>;
ti,max-div = <2>;
};
- disp_clk: disp_clk@4244 {
+ disp_clk: clock-disp@4244 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "disp_clk";
clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
reg = <0x4244>;
ti,set-rate-parent;
};
- dpll_extdev_ck: dpll_extdev_ck@2e60 {
+ dpll_extdev_ck: clock@2e60 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-clock";
+ clock-output-names = "dpll_extdev_ck";
clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
};
- dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
+ dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_extdev_m2_ck";
clocks = <&dpll_extdev_ck>;
ti,max-div = <127>;
ti,autoidle-shift = <8>;
@@ -578,66 +650,75 @@
ti,invert-autoidle-bit;
};
- mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
+ mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "mux_synctimer32k_ck";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
reg = <0x4230>;
};
- timer8_fck: timer8_fck@421c {
+ timer8_fck: clock-timer8-fck@421c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer8_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x421c>;
};
- timer9_fck: timer9_fck@4220 {
+ timer9_fck: clock-timer9-fck@4220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer9_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4220>;
};
- timer10_fck: timer10_fck@4224 {
+ timer10_fck: clock-timer10-fck@4224 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer10_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4224>;
};
- timer11_fck: timer11_fck@4228 {
+ timer11_fck: clock-timer11-fck@4228 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "timer11_fck";
clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
reg = <0x4228>;
};
- cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+ cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_50m_clkdiv";
clocks = <&dpll_core_m5_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+ cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "cpsw_5m_clkdiv";
clocks = <&cpsw_50m_clkdiv>;
clock-mult = <1>;
clock-div = <10>;
};
- dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+ dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
#clock-cells = <0>;
compatible = "ti,am3-dpll-x2-clock";
+ clock-output-names = "dpll_ddr_x2_ck";
clocks = <&dpll_ddr_ck>;
};
- dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
+ dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m4_ck";
clocks = <&dpll_ddr_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -646,9 +727,10 @@
ti,invert-autoidle-bit;
};
- dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
+ dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
+ clock-output-names = "dpll_per_clkdcoldo";
clocks = <&dpll_per_ck>;
ti,clock-mult = <1>;
ti,clock-div = <1>;
@@ -657,91 +739,102 @@
ti,invert-autoidle-bit;
};
- dll_aging_clk_div: dll_aging_clk_div@4250 {
+ dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dll_aging_clk_div";
clocks = <&sys_clkin_ck>;
reg = <0x4250>;
ti,dividers = <8>, <16>, <32>;
};
- div_core_25m_ck: div_core_25m_ck {
+ div_core_25m_ck: clock-div-core-25m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "div_core_25m_ck";
clocks = <&sysclk_div>;
clock-mult = <1>;
clock-div = <8>;
};
- func_12m_clk: func_12m_clk {
+ func_12m_clk: clock-func-12m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <16>;
};
- vtp_clk_div: vtp_clk_div {
+ vtp_clk_div: clock-vtp-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "vtp_clk_div";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
+ usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "usbphy_32khz_clkmux";
clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
reg = <0x4260>;
};
- usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
+ usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy0_always_on_clk32k";
clocks = <&usbphy_32khz_clkmux>;
ti,bit-shift = <8>;
reg = <0x2a40>;
};
- usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
+ usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy1_always_on_clk32k";
clocks = <&usbphy_32khz_clkmux>;
ti,bit-shift = <8>;
reg = <0x2a48>;
};
- clkout1_osc_div_ck: clkout1-osc-div-ck {
+ clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_osc_div_ck";
clocks = <&sys_clkin_ck>;
ti,bit-shift = <20>;
ti,max-div = <4>;
reg = <0x4100>;
};
- clkout1_src2_mux_ck: clkout1-src2-mux-ck {
+ clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "clkout1_src2_mux_ck";
clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
<&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
<&dpll_mpu_m2_ck>;
reg = <0x4100>;
};
- clkout1_src2_pre_div_ck: clkout1-src2-pre-div-ck {
+ clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_src2_pre_div_ck";
clocks = <&clkout1_src2_mux_ck>;
ti,bit-shift = <4>;
ti,max-div = <8>;
reg = <0x4100>;
};
- clkout1_src2_post_div_ck: clkout1-src2-post-div-ck {
+ clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "clkout1_src2_post_div_ck";
clocks = <&clkout1_src2_pre_div_ck>;
ti,bit-shift = <8>;
ti,max-div = <32>;
@@ -749,18 +842,20 @@
reg = <0x4100>;
};
- clkout1_mux_ck: clkout1-mux-ck {
+ clkout1_mux_ck: clock-clkout1-mux-ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "clkout1_mux_ck";
clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
<&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
ti,bit-shift = <16>;
reg = <0x4100>;
};
- clkout1_ck: clkout1-ck {
+ clkout1_ck: clock-clkout1-ck {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "clkout1_ck";
clocks = <&clkout1_mux_ck>;
ti,bit-shift = <23>;
reg = <0x4100>;
@@ -768,120 +863,138 @@
};
&prcm {
- wkup_cm: wkup-cm@2800 {
+ wkup_cm: clock@2800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "wkup_cm";
reg = <0x2800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x2800 0x400>;
- l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
+ l3s_tsc_clkctrl: clock@120 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3s_tsc_clkctrl";
reg = <0x120 0x4>;
#clock-cells = <2>;
};
- l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
+ l4_wkup_aon_clkctrl: clock@228 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_aon_clkctrl";
reg = <0x228 0xc>;
#clock-cells = <2>;
};
- l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
+ l4_wkup_clkctrl: clock@220 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
reg = <0x220 0x4>, <0x328 0x44>;
#clock-cells = <2>;
};
};
- mpu_cm: mpu-cm@8300 {
+ mpu_cm: clock@8300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
reg = <0x8300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x8300 0x100>;
- mpu_clkctrl: mpu-clkctrl@20 {
+ mpu_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- gfx_l3_cm: gfx-l3-cm@8400 {
+ gfx_l3_cm: clock@8400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "gfx_l3_cm";
reg = <0x8400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x8400 0x100>;
- gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
+ gfx_l3_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "gfx_l3_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- l4_rtc_cm: l4-rtc-cm@8500 {
+ l4_rtc_cm: clock@8500 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_rtc_cm";
reg = <0x8500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x8500 0x100>;
- l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
+ l4_rtc_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_rtc_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- per_cm: per-cm@8800 {
+ per_cm: clock@8800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "per_cm";
reg = <0x8800 0xc00>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x8800 0xc00>;
- l3_clkctrl: l3-clkctrl@20 {
+ l3_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_clkctrl";
reg = <0x20 0x3c>, <0x78 0x2c>;
#clock-cells = <2>;
};
- l3s_clkctrl: l3s-clkctrl@68 {
+ l3s_clkctrl: clock@68 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3s_clkctrl";
reg = <0x68 0xc>, <0x220 0x4c>;
#clock-cells = <2>;
};
- pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
+ pruss_ocp_clkctrl: clock@320 {
compatible = "ti,clkctrl";
+ clock-output-names = "pruss_ocp_clkctrl";
reg = <0x320 0x4>;
#clock-cells = <2>;
};
- l4ls_clkctrl: l4ls-clkctrl@420 {
+ l4ls_clkctrl: clock@420 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4ls_clkctrl";
reg = <0x420 0x1a4>;
#clock-cells = <2>;
};
- emif_clkctrl: emif-clkctrl@720 {
+ emif_clkctrl: clock@720 {
compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
reg = <0x720 0x4>;
#clock-cells = <2>;
};
- dss_clkctrl: dss-clkctrl@a20 {
+ dss_clkctrl: clock@a20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
reg = <0xa20 0x4>;
#clock-cells = <2>;
};
- cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
+ cpsw_125mhz_clkctrl: clock@b20 {
compatible = "ti,clkctrl";
+ clock-output-names = "cpsw_125mhz_clkctrl";
reg = <0xb20 0x4>;
#clock-cells = <2>;
};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 6dff3660bf09..47b9174d2353 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -18,7 +18,7 @@
&qspi {
spi-max-frequency = <96000000>;
- m25p80@0 {
+ flash@0 {
spi-max-frequency = <96000000>;
};
};
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
index 2e94f32d9dfc..2fc9a5d5e0c0 100644
--- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -491,7 +491,7 @@
spi-max-frequency = <48000000>;
- spi_flash: spi_flash@0 {
+ spi_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 9fcb8944aa3e..c06eda817242 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -526,7 +526,7 @@
status = "okay";
spi-max-frequency = <76800000>;
- m25p80@0 {
+ flash@0 {
compatible = "s25fl256s1", "jedec,spi-nor";
spi-max-frequency = <76800000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 77261a2fb949..a7dc4c04d10b 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -203,7 +203,7 @@
pinctrl-names = "default";
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l25635e", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
index a624b2371fb6..0abac5ffe45a 100644
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -159,7 +159,7 @@
pinctrl-0 = <&spi0_pins2>;
pinctrl-names = "default";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
/* MX25L8006E */
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 64f2ce254fb6..e72b8ed4b997 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -258,7 +258,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 0e679465cbb5..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -64,7 +64,7 @@
status = "disabled";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
index 0a961116a1f9..396172067f6a 100644
--- a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -242,7 +242,7 @@
pinctrl-names = "default";
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts
index ed3f41c7df71..241f5d7c80e9 100644
--- a/arch/arm/boot/dts/armada-385-atl-x530.dts
+++ b/arch/arm/boot/dts/armada-385-atl-x530.dts
@@ -168,7 +168,7 @@
pinctrl-0 = <&spi1_pins>;
status = "okay";
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
index 624bbcae68c0..10ad46f29393 100644
--- a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -365,7 +365,7 @@
pinctrl-names = "default";
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
index 7881df3b28a0..389d9c75d546 100644
--- a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -126,7 +126,7 @@
pinctrl-0 = <&spi1_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 0e4613bb56ee..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -192,7 +192,7 @@
pinctrl-0 = <&spi1_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index d8769956cbfc..2622af73c9da 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -223,7 +223,7 @@
pinctrl-0 = <&spi0_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "macronix,mx25l6405d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index f240018148f6..f4878df39753 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -348,7 +348,11 @@
#size-cells = <0>;
reg = <5>;
- /* ATSHA204A at address 0x64 */
+ /* ATSHA204A-MAHDA-T crypto module */
+ crypto@64 {
+ compatible = "atmel,atsha204a";
+ reg = <0x64>;
+ };
};
i2c@6 {
@@ -485,7 +489,7 @@
pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "spansion,s25fl164k", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index a2bec07bf4c5..5130eccc32af 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -133,7 +133,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 9d873257ac45..e2ba50520b6b 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -395,7 +395,7 @@
pinctrl-0 = <&spi0_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 328a4d6afd2c..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -97,7 +97,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p128", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 363ac4238859..2c64bc6e5a17 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -101,7 +101,7 @@
/* The microsom has an optional W25Q32 on board, connected to CS0 */
pinctrl-0 = <&spi1_pins>;
- w25q32: spi-flash@0 {
+ w25q32: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
index 0e29474ae9a2..792d0a0184e8 100644
--- a/arch/arm/boot/dts/armada-390-db.dts
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -81,7 +81,7 @@
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
- spi-flash@1 {
+ flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13",
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index fc28308e5bc5..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -79,7 +79,7 @@
pinctrl-0 = <&spi1_pins>;
pinctrl-names = "default";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 606fd3476a59..3e77b4337802 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -134,7 +134,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
index a022c68dc943..c28e140b4afc 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
@@ -15,7 +15,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
index 32fb21b2bf6a..47b003a81bd4 100644
--- a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
@@ -80,7 +80,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
index 21f442afab1f..20ba5c823bb2 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -15,7 +15,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
index f3e1a25ca5f2..cab99d8e2911 100644
--- a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
@@ -80,7 +80,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
index e05aee6cdc04..2caa3980fdf6 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -15,7 +15,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
index c8b1355ce15e..7028482ce4b2 100644
--- a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
@@ -80,7 +80,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
index 8a3aa616bbd0..02bef8dc4270 100644
--- a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -93,7 +93,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
index 4ec0ae01b61d..d1b61dad0c46 100644
--- a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -89,7 +89,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64";
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 5d04dc68cf57..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -235,7 +235,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p64", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index b4cca507cf13..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -220,7 +220,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a13", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 8480a16919a0..36932e3b781a 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -255,7 +255,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 809e821d7399..5551bac1962c 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -274,7 +274,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q064", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index ad65be871938..f9f79ed82518 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -397,8 +397,8 @@
#size-cells = <0>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_0>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ clocks = <&axi81_clk>, <&axi81_clk>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
@@ -409,8 +409,8 @@
#size-cells = <0>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_1>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ clocks = <&axi81_clk>, <&axi81_clk>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
@@ -421,8 +421,8 @@
#size-cells = <0>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-0 = <&spi_2>;
- clocks = <&axi81_clk>;
- clock-names = "apb_pclk";
+ clocks = <&axi81_clk>, <&axi81_clk>;
+ clock-names = "sspclk", "apb_pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
index 40b9405f1a8e..9b9a18bbb20a 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -32,7 +32,6 @@
* This is based on the unreleased schematic for the Model A+.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -67,21 +66,21 @@
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
+ "", /* GPIO30 */
+ "", /* GPIO31 */
"CAM_GPIO1", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
"PWR_LOW_N", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
"USB_LIMIT", /* GPIO38 */
- "NC", /* GPIO39 */
+ "", /* GPIO39 */
"PWM0_OUT", /* GPIO40 */
"CAM_GPIO0", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "", /* GPIO44 */
"PWM1_OUT", /* GPIO45 */
"HDMI_HPD_N",
"STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
index 11edb581dbaf..f664e4fced93 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -26,7 +26,6 @@
* RPI00021 sheet 02
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -42,41 +41,41 @@
"SPI_MISO",
"SPI_MOSI",
"SPI_SCLK",
- "NC", /* GPIO12 */
- "NC", /* GPIO13 */
+ "", /* GPIO12 */
+ "", /* GPIO13 */
/* Serial port */
"TXD0",
"RXD0",
"STATUS_LED_N",
"GPIO17",
"GPIO18",
- "NC", /* GPIO19 */
- "NC", /* GPIO20 */
+ "", /* GPIO19 */
+ "", /* GPIO20 */
"GPIO21",
"GPIO22",
"GPIO23",
"GPIO24",
"GPIO25",
- "NC", /* GPIO26 */
+ "", /* GPIO26 */
"CAM_GPIO0",
/* Binary number representing build/revision */
"CONFIG0",
"CONFIG1",
"CONFIG2",
"CONFIG3",
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ "", /* GPIO32 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
+ "", /* GPIO35 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
+ "", /* GPIO38 */
+ "", /* GPIO39 */
"PWM0_OUT",
- "NC", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
+ "", /* GPIO41 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "", /* GPIO44 */
"PWM1_OUT",
"HDMI_HPD_P",
"SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 1b435c64bd9c..248feb2ed23d 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -34,7 +34,6 @@
* RPI-BPLUS sheet 1
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -69,21 +68,21 @@
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
+ "", /* GPIO30 */
"LAN_RUN", /* GPIO31 */
"CAM_GPIO1", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
"PWR_LOW_N", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
"USB_LIMIT", /* GPIO38 */
- "NC", /* GPIO39 */
+ "", /* GPIO39 */
"PWM0_OUT", /* GPIO40 */
"CAM_GPIO0", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "ETHCLK", /* GPIO44 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "ETH_CLK", /* GPIO44 */
"PWM1_OUT", /* GPIO45 */
"HDMI_HPD_N",
"STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
index a23c25c00eea..f5b66d3f4ff3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -27,7 +27,6 @@
* RPI00022 sheet 02
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -43,40 +42,40 @@
"SPI_MISO",
"SPI_MOSI",
"SPI_SCLK",
- "NC", /* GPIO12 */
- "NC", /* GPIO13 */
+ "", /* GPIO12 */
+ "", /* GPIO13 */
/* Serial port */
"TXD0",
"RXD0",
"STATUS_LED_N",
"GPIO17",
"GPIO18",
- "NC", /* GPIO19 */
- "NC", /* GPIO20 */
+ "", /* GPIO19 */
+ "", /* GPIO20 */
"CAM_GPIO",
"GPIO22",
"GPIO23",
"GPIO24",
"GPIO25",
- "NC", /* GPIO26 */
+ "", /* GPIO26 */
"GPIO27",
"GPIO28",
"GPIO29",
"GPIO30",
"GPIO31",
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ "", /* GPIO32 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
+ "", /* GPIO35 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
+ "", /* GPIO38 */
+ "", /* GPIO39 */
"PWM0_OUT",
- "NC", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
+ "", /* GPIO41 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "", /* GPIO44 */
"PWM1_OUT",
"HDMI_HPD_P",
"SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 1b63d6b19750..f589bede2b11 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -27,7 +27,6 @@
* RPI00021 sheet 02
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -43,41 +42,40 @@
"SPI_MISO",
"SPI_MOSI",
"SPI_SCLK",
- "NC", /* GPIO12 */
- "NC", /* GPIO13 */
+ "", /* GPIO12 */
+ "", /* GPIO13 */
/* Serial port */
"TXD0",
"RXD0",
"STATUS_LED_N",
"GPIO17",
"GPIO18",
- "NC", /* GPIO19 */
- "NC", /* GPIO20 */
- "GPIO21",
+ "", /* GPIO19 */
+ "", /* GPIO20 */
+ "CAM_GPIO0",
"GPIO22",
"GPIO23",
"GPIO24",
"GPIO25",
- "NC", /* GPIO26 */
- "CAM_GPIO0",
- /* Binary number representing build/revision */
- "CONFIG0",
- "CONFIG1",
- "CONFIG2",
- "CONFIG3",
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ "", /* GPIO26 */
+ "GPIO27",
+ "GPIO28",
+ "GPIO29",
+ "GPIO30",
+ "GPIO31",
+ "", /* GPIO32 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
+ "", /* GPIO35 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
+ "", /* GPIO38 */
+ "", /* GPIO39 */
"PWM0_OUT",
- "NC", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
+ "", /* GPIO41 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "", /* GPIO44 */
"PWM1_OUT",
"HDMI_HPD_P",
"SD_CARD_DET",
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
index a75c882e6575..87958a96c3e0 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -13,7 +13,6 @@
* This is based on the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
index 243236bc1e00..596bb1ef994e 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -39,7 +39,6 @@
* This is based on the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -74,19 +73,21 @@
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
- "NC", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
+ /* Used by BT module */
+ "CTS0",
+ "RTS0",
+ "TXD0",
+ "RXD0",
+ /* Used by Wifi */
+ "SD1_CLK",
+ "SD1_CMD",
+ "SD1_DATA0",
+ "SD1_DATA1",
+ "SD1_DATA2",
+ "SD1_DATA3",
"CAM_GPIO1", /* GPIO40 */
"WL_ON", /* GPIO41 */
- "NC", /* GPIO42 */
+ "", /* GPIO42 */
"WIFI_CLK", /* GPIO43 */
"CAM_GPIO0", /* GPIO44 */
"BT_ON", /* GPIO45 */
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
index 6f9b3a908f28..a65c2bca69ea 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -29,7 +29,6 @@
* This is based on the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -64,22 +63,22 @@
"GPIO27",
"SDA0",
"SCL0",
- "NC", /* GPIO30 */
- "NC", /* GPIO31 */
+ "", /* GPIO30 */
+ "", /* GPIO31 */
"CAM_GPIO1", /* GPIO32 */
- "NC", /* GPIO33 */
- "NC", /* GPIO34 */
- "NC", /* GPIO35 */
- "NC", /* GPIO36 */
- "NC", /* GPIO37 */
- "NC", /* GPIO38 */
- "NC", /* GPIO39 */
- "NC", /* GPIO40 */
+ "", /* GPIO33 */
+ "", /* GPIO34 */
+ "", /* GPIO35 */
+ "", /* GPIO36 */
+ "", /* GPIO37 */
+ "", /* GPIO38 */
+ "", /* GPIO39 */
+ "", /* GPIO40 */
"CAM_GPIO0", /* GPIO41 */
- "NC", /* GPIO42 */
- "NC", /* GPIO43 */
- "NC", /* GPIO44 */
- "NC", /* GPIO45 */
+ "", /* GPIO42 */
+ "", /* GPIO43 */
+ "", /* GPIO44 */
+ "", /* GPIO45 */
"HDMI_HPD_N",
"STATUS_LED_N",
/* Used by SD Card */
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
index d8af8eeac7b6..3635502b1e0a 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -34,7 +34,6 @@
* the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -83,7 +82,7 @@
"CAM_GPIO0",
"SMPS_SCL",
"SMPS_SDA",
- "ETHCLK",
+ "ETH_CLK",
"PWM1_OUT",
"HDMI_HPD_N",
"STATUS_LED",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
index d73daf5bff1d..f7222a28903e 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -55,7 +55,6 @@
* This is mostly based on the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index e12938baaf12..ec721d323ac5 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -45,7 +45,7 @@
#gpio-cells = <2>;
gpio-line-names = "BT_ON",
"WL_ON",
- "STATUS_LED_R",
+ "PWR_LED_R",
"LAN_RUN",
"",
"CAM_GPIO0",
@@ -61,7 +61,6 @@
* the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -110,7 +109,7 @@
"SD1_DATA3",
"PWM0_OUT",
"PWM1_OUT",
- "ETHCLK",
+ "ETH_CLK",
"WIFI_CLK",
"SDA0",
"SCL0",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 42b5383b55d8..fb6a417d73e7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -54,7 +54,6 @@
* the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -103,7 +102,7 @@
"SD1_DATA3",
"PWM0_OUT",
"PWM1_OUT",
- "ETHCLK",
+ "ETH_CLK",
"WIFI_CLK",
"SDA0",
"SCL0",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..cf84e69fced8 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -13,7 +13,6 @@
* This is based on the official GPU firmware DT blob.
*
* Legend:
- * "NC" = not connected (no rail from the SoC)
* "FOO" = GPIO line named "FOO" on the schematic
* "FOO_N" = GPIO line named "FOO" on schematic, active low
*/
@@ -63,8 +62,8 @@
"GPIO43",
"GPIO44",
"GPIO45",
- "GPIO46",
- "GPIO47",
+ "SMPS_SCL",
+ "SMPS_SDA",
/* Used by eMMC */
"SD_CLK_R",
"SD_CMD_R",
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
index 828a20561b96..f57b4ca145dd 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -41,12 +41,12 @@
#gpio-cells = <2>;
gpio-line-names = "HDMI_HPD_N",
"EMMC_EN_N",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC",
- "NC";
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
+ ethernet: ethernet@1 {
compatible = "usb424,ec00";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
+ ethernet: ethernet@1 {
compatible = "usb424,ec00";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..d659e409a17e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 7 0>;
+ gpio-mosi = <&chipcommon 4 0>;
+ cs-gpios = <&chipcommon 6 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hc595: gpio_spi@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ registers-number = <1>;
+ spi-max-frequency = <100000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb {
+ /* label = "bcm53xx:blue:usb"; */
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
+ <&xhci_port1>, <&ohci_port2>,
+ <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ power0 {
+ /* label = "bcm53xx:red:power"; */
+ function = LED_FUNCTION_FAULT;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ power1 {
+ /* label = "bcm53xx:white:power"; */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router0 {
+ /* label = "bcm53xx:blue:router"; */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ router1 {
+ /* label = "bcm53xx:amber:router"; */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ /* label = "bcm53xx:blue:wan"; */
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ wireless0 {
+ /* label = "bcm53xx:blue:wireless"; */
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wireless1 {
+ /* label = "bcm53xx:amber:wireless"; */
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+ mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+ sw_ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+ eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+ model = "Buffalo WZR-1166DHP";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x18000000>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+ model = "Buffalo WZR-1166DHP2";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>,
+ <0x88000000 0x08000000>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 82f9629f0abb..d8503758342b 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
*/
/dts-v1/;
@@ -25,6 +25,9 @@
nvram@1c080000 {
compatible = "brcm,nvram";
reg = <0x1c080000 0x00180000>;
+
+ et1macaddr: et1macaddr {
+ };
};
leds {
@@ -177,9 +180,6 @@
dsa,member = <0 0>;
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
port@0 {
reg = <0>;
label = "lan4";
@@ -208,6 +208,7 @@
sw0_p5: port@5 {
reg = <5>;
label = "extsw";
+ phy-mode = "rgmii";
fixed-link {
speed = <1000>;
@@ -231,7 +232,6 @@
reg = <8>;
ethernet = <&gmac2>;
label = "cpu";
- status = "disabled";
fixed-link {
speed = <1000>;
@@ -241,6 +241,15 @@
};
};
+&gmac0 {
+ status = "disabled";
+};
+
+&gmac1 {
+ nvmem-cells = <&et1macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb2 {
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
new file mode 100644
index 000000000000..c016e12b7372
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "brcm,bcm47622", "brcm,bcmbca";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CA7_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+
+ CA7_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ CA7_2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ CA7_3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ next-level-cache = <&L2_0>;
+ enable-method = "psci";
+ };
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
+ pmu: pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CA7_0>, <&CA7_1>,
+ <&CA7_2>, <&CA7_3>;
+ };
+
+ clocks: clocks {
+ periph_clk: periph-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+ uart_clk: uart-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&periph_clk>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ cpu_off = <1>;
+ cpu_on = <2>;
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x81000000 0x818000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>;
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff800000 0x800000>;
+
+ uart0: serial@12000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>, <&uart_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 66c64a6ec414..daca63f25134 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -13,7 +13,7 @@
#include <dt-bindings/leds/common.h>
/ {
- compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708";
+ compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
model = "Meraki MR32";
chosen {
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 603c700c706f..65f8a759f1e3 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -455,7 +455,7 @@
reg = <0x180 0x4>;
};
- pinctrl: pin-controller@1c0 {
+ pinctrl: pinctrl@1c0 {
compatible = "brcm,bcm4708-pinmux";
reg = <0x1c0 0x24>;
reg-names = "cru_gpio_control";
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
index 2e7fda9b998c..975f854f652f 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -34,7 +34,7 @@
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "m25p80";
reg = <0>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
new file mode 100644
index 000000000000..6f083724ab8e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+ model = "Broadcom BCM947622 Reference Board";
+ compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x08000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 52feca0fb906..dd63a148a16b 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -37,7 +37,7 @@
/ {
model = "NorthStar Enterprise Router (BCM953012ER)";
- compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+ compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
memory@0 {
device_type = "memory";
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
index 9140be7ec053..b070b69466bd 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -37,7 +37,7 @@
/ {
model = "NorthStar HR (BCM953012HR)";
- compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+ compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
aliases {
ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index de40bd59a5fa..f1e6bcaa1edd 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -36,7 +36,7 @@
/ {
model = "NorthStar SVK (BCM953012K)";
- compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+ compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
aliases {
serial0 = &uart0;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 60376b62cd5f..15f023656df0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -136,7 +136,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index 8eeb319f5b54..9b9c225a1fb3 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -136,7 +136,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index dc86d5a91292..ca9311452739 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -152,7 +152,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index c457e53d886e..9db3c851451a 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -140,7 +140,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index c06871915a1c..32786e7c4e12 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -144,7 +144,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index b22fc6624ae4..74263d98de73 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -151,7 +151,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 0183f8965a74..69ebc7a913a7 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -155,7 +155,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index 007e34715956..e96bc3f2d5cf 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -140,7 +140,7 @@
&qspi {
status = "okay";
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
index 7702e048e110..a92630113f57 100644
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -167,8 +167,11 @@
interrupts = <17>;
interrupt-names = "glue";
#dma-cells = <2>;
+ /* For backwards compatibility: */
#dma-channels = <30>;
+ dma-channels = <30>;
#dma-requests = <256>;
+ dma-requests = <256>;
};
};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index a9e7274806f4..eb0a95da94b2 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -655,8 +655,11 @@
interrupts = <17>;
interrupt-names = "glue";
#dma-cells = <2>;
+ /* For backwards compatibility: */
#dma-channels = <30>;
+ dma-channels = <30>;
#dma-requests = <256>;
+ dma-requests = <256>;
};
};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 3e1584e787ae..2639b9fe0ab4 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -127,7 +127,7 @@
status = "okay";
/* spi0.0: 4M Flash Winbond W25Q32BV */
- spi-flash@0 {
+ flash@0 {
compatible = "st,w25q32";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
index 273f12ca2512..a0e8996c2ffd 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -62,7 +62,7 @@
status = "okay";
/* spi0.0: 4M Flash Macronix MX25L3205D */
- spi-flash@0 {
+ flash@0 {
compatible = "st,m25l3205d";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
index 826026c28f90..1e81d1b97055 100644
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -79,7 +79,7 @@
status = "okay";
/* spi0.0: 2M Flash Macronix MX25L1605D */
- spi-flash@0 {
+ flash@0 {
compatible = "st,m25l1605d";
spi-max-frequency = <86000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index 1754a62e014e..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -27,7 +27,7 @@
status = "okay";
/* spi0.0: 4M Flash ST-M25P32-VMF6P */
- spi-flash@0 {
+ flash@0 {
compatible = "st,m25p32";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 0f71a9f37a72..68c43eb12c1a 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -135,7 +135,7 @@
status = "okay";
spi-max-frequency = <76800000>;
- m25p80@0 {
+ flash@0 {
compatible = "s25fl256s1";
spi-max-frequency = <76800000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index f12825268188..8948e10dbeb8 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -474,7 +474,7 @@
status = "okay";
spi-max-frequency = <76800000>;
- m25p80@0 {
+ flash@0 {
compatible = "s25fl256s1";
spi-max-frequency = <76800000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index e2b7fcb061cf..57868ac60d29 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -511,7 +511,7 @@
&qspi {
spi-max-frequency = <96000000>;
- m25p80@0 {
+ flash@0 {
spi-max-frequency = <96000000>;
};
};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 2365554eef3c..04a7a6d1d529 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -5,210 +5,244 @@
* Copyright (C) 2013 Texas Instruments, Inc.
*/
&cm_core_aon_clocks {
- atl_clkin0_ck: atl_clkin0_ck {
+ atl_clkin0_ck: clock-atl-clkin0 {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin0_ck";
clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
- atl_clkin1_ck: atl_clkin1_ck {
+ atl_clkin1_ck: clock-atl-clkin1 {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin1_ck";
clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
- atl_clkin2_ck: atl_clkin2_ck {
+ atl_clkin2_ck: clock-atl-clkin2 {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin2_ck";
clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
- atl_clkin3_ck: atl_clkin3_ck {
+ atl_clkin3_ck: clock-atl-clkin3 {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
+ clock-output-names = "atl_clkin3_ck";
clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
- hdmi_clkin_ck: hdmi_clkin_ck {
+ hdmi_clkin_ck: clock-hdmi-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "hdmi_clkin_ck";
clock-frequency = <0>;
};
- mlb_clkin_ck: mlb_clkin_ck {
+ mlb_clkin_ck: clock-mlb-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "mlb_clkin_ck";
clock-frequency = <0>;
};
- mlbp_clkin_ck: mlbp_clkin_ck {
+ mlbp_clkin_ck: clock-mlbp-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "mlbp_clkin_ck";
clock-frequency = <0>;
};
- pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+ pciesref_acs_clk_ck: clock-pciesref-acs {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "pciesref_acs_clk_ck";
clock-frequency = <100000000>;
};
- ref_clkin0_ck: ref_clkin0_ck {
+ ref_clkin0_ck: clock-ref-clkin0 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "ref_clkin0_ck";
clock-frequency = <0>;
};
- ref_clkin1_ck: ref_clkin1_ck {
+ ref_clkin1_ck: clock-ref-clkin1 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "ref_clkin1_ck";
clock-frequency = <0>;
};
- ref_clkin2_ck: ref_clkin2_ck {
+ ref_clkin2_ck: clock-ref-clkin2 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "ref_clkin2_ck";
clock-frequency = <0>;
};
- ref_clkin3_ck: ref_clkin3_ck {
+ ref_clkin3_ck: clock-ref-clkin3 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "ref_clkin3_ck";
clock-frequency = <0>;
};
- rmii_clk_ck: rmii_clk_ck {
+ rmii_clk_ck: clock-rmii {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "rmii_clk_ck";
clock-frequency = <0>;
};
- sdvenc_clkin_ck: sdvenc_clkin_ck {
+ sdvenc_clkin_ck: clock-sdvenc-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "sdvenc_clkin_ck";
clock-frequency = <0>;
};
- secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+ secure_32k_clk_src_ck: clock-secure-32k-clk-src {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
clock-frequency = <32768>;
};
- sys_clk32_crystal_ck: sys_clk32_crystal_ck {
+ sys_clk32_crystal_ck: clock-sys-clk32-crystal {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "sys_clk32_crystal_ck";
clock-frequency = <32768>;
};
- sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+ sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "sys_clk32_pseudo_ck";
clocks = <&sys_clkin1>;
clock-mult = <1>;
clock-div = <610>;
};
- virt_12000000_ck: virt_12000000_ck {
+ virt_12000000_ck: clock-virt-12000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
clock-frequency = <12000000>;
};
- virt_13000000_ck: virt_13000000_ck {
+ virt_13000000_ck: clock-virt-13000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
clock-frequency = <13000000>;
};
- virt_16800000_ck: virt_16800000_ck {
+ virt_16800000_ck: clock-virt-16800000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
clock-frequency = <16800000>;
};
- virt_19200000_ck: virt_19200000_ck {
+ virt_19200000_ck: clock-virt-19200000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
clock-frequency = <19200000>;
};
- virt_20000000_ck: virt_20000000_ck {
+ virt_20000000_ck: clock-virt-20000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_20000000_ck";
clock-frequency = <20000000>;
};
- virt_26000000_ck: virt_26000000_ck {
+ virt_26000000_ck: clock-virt-26000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
clock-frequency = <26000000>;
};
- virt_27000000_ck: virt_27000000_ck {
+ virt_27000000_ck: clock-virt-27000000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
clock-frequency = <27000000>;
};
- virt_38400000_ck: virt_38400000_ck {
+ virt_38400000_ck: clock-virt-38400000 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
clock-frequency = <38400000>;
};
- sys_clkin2: sys_clkin2 {
+ sys_clkin2: clock-sys-clkin2 {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "sys_clkin2";
clock-frequency = <22579200>;
};
- usb_otg_clkin_ck: usb_otg_clkin_ck {
+ usb_otg_clkin_ck: clock-usb-otg-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "usb_otg_clkin_ck";
clock-frequency = <0>;
};
- video1_clkin_ck: video1_clkin_ck {
+ video1_clkin_ck: clock-video1-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "video1_clkin_ck";
clock-frequency = <0>;
};
- video1_m2_clkin_ck: video1_m2_clkin_ck {
+ video1_m2_clkin_ck: clock-video1-m2-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "video1_m2_clkin_ck";
clock-frequency = <0>;
};
- video2_clkin_ck: video2_clkin_ck {
+ video2_clkin_ck: clock-video2-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "video2_clkin_ck";
clock-frequency = <0>;
};
- video2_m2_clkin_ck: video2_m2_clkin_ck {
+ video2_m2_clkin_ck: clock-video2-m2-clkin {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "video2_m2_clkin_ck";
clock-frequency = <0>;
};
- dpll_abe_ck: dpll_abe_ck@1e0 {
+ dpll_abe_ck: clock@1e0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
};
- dpll_abe_x2_ck: dpll_abe_x2_ck {
+ dpll_abe_x2_ck: clock-dpll-abe-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
clocks = <&dpll_abe_ck>;
};
- dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
+ dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -217,18 +251,20 @@
ti,invert-autoidle-bit;
};
- abe_clk: abe_clk@108 {
+ abe_clk: clock-abe@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
clocks = <&dpll_abe_m2x2_ck>;
ti,max-div = <4>;
reg = <0x0108>;
ti,index-power-of-two;
};
- dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
+ dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2_ck";
clocks = <&dpll_abe_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -237,9 +273,10 @@
ti,invert-autoidle-bit;
};
- dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
+ dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -248,30 +285,34 @@
ti,invert-autoidle-bit;
};
- dpll_core_byp_mux: dpll_core_byp_mux@12c {
+ dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_core_byp_mux";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
};
- dpll_core_ck: dpll_core_ck@120 {
+ dpll_core_ck: clock@120 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
- dpll_core_x2_ck: dpll_core_x2_ck {
+ dpll_core_x2_ck: clock-dpll-core-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
clocks = <&dpll_core_ck>;
};
- dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
+ dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h12x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -280,24 +321,27 @@
ti,invert-autoidle-bit;
};
- mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+ mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_mpu_ck: dpll_mpu_ck@160 {
+ dpll_mpu_ck: clock@160 {
#clock-cells = <0>;
compatible = "ti,omap5-mpu-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
};
- dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
+ dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
clocks = <&dpll_mpu_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -306,42 +350,47 @@
ti,invert-autoidle-bit;
};
- mpu_dclk_div: mpu_dclk_div {
+ mpu_dclk_div: clock-mpu-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dclk_div";
clocks = <&dpll_mpu_m2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+ dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dsp_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
+ dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_dsp_byp_mux";
clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0240>;
};
- dpll_dsp_ck: dpll_dsp_ck@234 {
+ dpll_dsp_ck: clock@234 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_dsp_ck";
clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
assigned-clocks = <&dpll_dsp_ck>;
assigned-clock-rates = <600000000>;
};
- dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
+ dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_dsp_m2_ck";
clocks = <&dpll_dsp_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -352,34 +401,38 @@
assigned-clock-rates = <600000000>;
};
- iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+ iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
+ dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_iva_byp_mux";
clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
};
- dpll_iva_ck: dpll_iva_ck@1a0 {
+ dpll_iva_ck: clock@1a0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
assigned-clocks = <&dpll_iva_ck>;
assigned-clock-rates = <1165000000>;
};
- dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
+ dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m2_ck";
clocks = <&dpll_iva_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -390,34 +443,38 @@
assigned-clock-rates = <388333334>;
};
- iva_dclk: iva_dclk {
+ iva_dclk: clock-iva-dclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dclk";
clocks = <&dpll_iva_m2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
+ dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gpu_byp_mux";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02e4>;
};
- dpll_gpu_ck: dpll_gpu_ck@2d8 {
+ dpll_gpu_ck: clock@2d8 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_gpu_ck";
clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
assigned-clocks = <&dpll_gpu_ck>;
assigned-clock-rates = <1277000000>;
};
- dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
+ dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gpu_m2_ck";
clocks = <&dpll_gpu_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -428,9 +485,10 @@
assigned-clock-rates = <425666667>;
};
- dpll_core_m2_ck: dpll_core_m2_ck@130 {
+ dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
clocks = <&dpll_core_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -439,32 +497,36 @@
ti,invert-autoidle-bit;
};
- core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+ core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "core_dpll_out_dclk_div";
clocks = <&dpll_core_m2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
+ dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_ddr_byp_mux";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x021c>;
};
- dpll_ddr_ck: dpll_ddr_ck@210 {
+ dpll_ddr_ck: clock@210 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_ddr_ck";
clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
};
- dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
+ dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_m2_ck";
clocks = <&dpll_ddr_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -473,24 +535,27 @@
ti,invert-autoidle-bit;
};
- dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
+ dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_gmac_byp_mux";
clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x02b4>;
};
- dpll_gmac_ck: dpll_gmac_ck@2a8 {
+ dpll_gmac_ck: clock@2a8 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_gmac_ck";
clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
};
- dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
+ dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_m2_ck";
clocks = <&dpll_gmac_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -499,72 +564,81 @@
ti,invert-autoidle-bit;
};
- video2_dclk_div: video2_dclk_div {
+ video2_dclk_div: clock-video2-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video2_dclk_div";
clocks = <&video2_m2_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- video1_dclk_div: video1_dclk_div {
+ video1_dclk_div: clock-video1-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video1_dclk_div";
clocks = <&video1_m2_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- hdmi_dclk_div: hdmi_dclk_div {
+ hdmi_dclk_div: clock-hdmi-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_dclk_div";
clocks = <&hdmi_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+ per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "per_dpll_hs_clk_div";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+ usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "usb_dpll_hs_clk_div";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <3>;
};
- eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+ eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "eve_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
+ dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_eve_byp_mux";
clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x0290>;
};
- dpll_eve_ck: dpll_eve_ck@284 {
+ dpll_eve_ck: clock@284 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_eve_ck";
clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
};
- dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
+ dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_eve_m2_ck";
clocks = <&dpll_eve_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -573,17 +647,19 @@
ti,invert-autoidle-bit;
};
- eve_dclk_div: eve_dclk_div {
+ eve_dclk_div: clock-eve-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "eve_dclk_div";
clocks = <&dpll_eve_m2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
+ dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h13x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -592,9 +668,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
+ dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h14x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -603,9 +680,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
+ dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h22x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -614,9 +692,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
+ dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h23x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -625,9 +704,10 @@
ti,invert-autoidle-bit;
};
- dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
+ dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h24x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -636,15 +716,17 @@
ti,invert-autoidle-bit;
};
- dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+ dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_ddr_x2_ck";
clocks = <&dpll_ddr_ck>;
};
- dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
+ dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_ddr_h11x2_ck";
clocks = <&dpll_ddr_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -653,15 +735,17 @@
ti,invert-autoidle-bit;
};
- dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+ dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_dsp_x2_ck";
clocks = <&dpll_dsp_ck>;
};
- dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
+ dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_dsp_m3x2_ck";
clocks = <&dpll_dsp_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -672,15 +756,17 @@
assigned-clock-rates = <400000000>;
};
- dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+ dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_gmac_x2_ck";
clocks = <&dpll_gmac_ck>;
};
- dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
+ dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h11x2_ck";
clocks = <&dpll_gmac_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -689,9 +775,10 @@
ti,invert-autoidle-bit;
};
- dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
+ dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h12x2_ck";
clocks = <&dpll_gmac_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -700,9 +787,10 @@
ti,invert-autoidle-bit;
};
- dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
+ dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_h13x2_ck";
clocks = <&dpll_gmac_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -711,9 +799,10 @@
ti,invert-autoidle-bit;
};
- dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
+ dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_gmac_m3x2_ck";
clocks = <&dpll_gmac_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -722,33 +811,37 @@
ti,invert-autoidle-bit;
};
- gmii_m_clk_div: gmii_m_clk_div {
+ gmii_m_clk_div: clock-gmii-m-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "gmii_m_clk_div";
clocks = <&dpll_gmac_h11x2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- hdmi_clk2_div: hdmi_clk2_div {
+ hdmi_clk2_div: clock-hdmi-clk2-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_clk2_div";
clocks = <&hdmi_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- hdmi_div_clk: hdmi_div_clk {
+ hdmi_div_clk: clock-hdmi-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "hdmi_div_clk";
clocks = <&hdmi_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- l3_iclk_div: l3_iclk_div@100 {
+ l3_iclk_div: clock-l3-iclk-div-4@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3_iclk_div";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x0100>;
@@ -756,374 +849,420 @@
ti,index-power-of-two;
};
- l4_root_clk_div: l4_root_clk_div {
+ l4_root_clk_div: clock-l4-root-clk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l4_root_clk_div";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <2>;
};
- video1_clk2_div: video1_clk2_div {
+ video1_clk2_div: clock-video1-clk2-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video1_clk2_div";
clocks = <&video1_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- video1_div_clk: video1_div_clk {
+ video1_div_clk: clock-video1-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video1_div_clk";
clocks = <&video1_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- video2_clk2_div: video2_clk2_div {
+ video2_clk2_div: clock-video2-clk2-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video2_clk2_div";
clocks = <&video2_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- video2_div_clk: video2_div_clk {
+ video2_div_clk: clock-video2-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "video2_div_clk";
clocks = <&video2_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dummy_ck: dummy_ck {
+ dummy_ck: clock-dummy {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
clock-frequency = <0>;
};
};
&prm_clocks {
- sys_clkin1: sys_clkin1@110 {
+ sys_clkin1: clock-sys-clkin1@110 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin1";
clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
reg = <0x0110>;
ti,index-starts-at-one;
};
- abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
+ abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_sys_clk_mux";
clocks = <&sys_clkin1>, <&sys_clkin2>;
reg = <0x0118>;
};
- abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
+ abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux";
clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
reg = <0x0114>;
};
- abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
+ abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_clk_mux";
clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
reg = <0x010c>;
};
- abe_24m_fclk: abe_24m_fclk@11c {
+ abe_24m_fclk: clock-abe-24m@11c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_24m_fclk";
clocks = <&dpll_abe_m2x2_ck>;
reg = <0x011c>;
ti,dividers = <8>, <16>;
};
- aess_fclk: aess_fclk@178 {
+ aess_fclk: clock-aess@178 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "aess_fclk";
clocks = <&abe_clk>;
reg = <0x0178>;
ti,max-div = <2>;
};
- abe_giclk_div: abe_giclk_div@174 {
+ abe_giclk_div: clock-abe-giclk-div@174 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_giclk_div";
clocks = <&aess_fclk>;
reg = <0x0174>;
ti,max-div = <2>;
};
- abe_lp_clk_div: abe_lp_clk_div@1d8 {
+ abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_lp_clk_div";
clocks = <&dpll_abe_m2x2_ck>;
reg = <0x01d8>;
ti,dividers = <16>, <32>;
};
- abe_sys_clk_div: abe_sys_clk_div@120 {
+ abe_sys_clk_div: clock-abe-sys-clk-div@120 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_sys_clk_div";
clocks = <&sys_clkin1>;
reg = <0x0120>;
ti,max-div = <2>;
};
- adc_gfclk_mux: adc_gfclk_mux@1dc {
+ adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "adc_gfclk_mux";
clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
reg = <0x01dc>;
};
- sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
+ sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "sys_clk1_dclk_div";
clocks = <&sys_clkin1>;
ti,max-div = <64>;
reg = <0x01c8>;
ti,index-power-of-two;
};
- sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
+ sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "sys_clk2_dclk_div";
clocks = <&sys_clkin2>;
ti,max-div = <64>;
reg = <0x01cc>;
ti,index-power-of-two;
};
- per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
+ per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_x1_dclk_div";
clocks = <&dpll_abe_m2_ck>;
ti,max-div = <64>;
reg = <0x01bc>;
ti,index-power-of-two;
};
- dsp_gclk_div: dsp_gclk_div@18c {
+ dsp_gclk_div: clock-dsp-gclk-div@18c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dsp_gclk_div";
clocks = <&dpll_dsp_m2_ck>;
ti,max-div = <64>;
reg = <0x018c>;
ti,index-power-of-two;
};
- gpu_dclk: gpu_dclk@1a0 {
+ gpu_dclk: clock-gpu-dclk@1a0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "gpu_dclk";
clocks = <&dpll_gpu_m2_ck>;
ti,max-div = <64>;
reg = <0x01a0>;
ti,index-power-of-two;
};
- emif_phy_dclk_div: emif_phy_dclk_div@190 {
+ emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "emif_phy_dclk_div";
clocks = <&dpll_ddr_m2_ck>;
ti,max-div = <64>;
reg = <0x0190>;
ti,index-power-of-two;
};
- gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
+ gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "gmac_250m_dclk_div";
clocks = <&dpll_gmac_m2_ck>;
ti,max-div = <64>;
reg = <0x019c>;
ti,index-power-of-two;
};
- gmac_main_clk: gmac_main_clk {
+ gmac_main_clk: clock-gmac-main {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "gmac_main_clk";
clocks = <&gmac_250m_dclk_div>;
clock-mult = <1>;
clock-div = <2>;
};
- l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
+ l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3init_480m_dclk_div";
clocks = <&dpll_usb_m2_ck>;
ti,max-div = <64>;
reg = <0x01ac>;
ti,index-power-of-two;
};
- usb_otg_dclk_div: usb_otg_dclk_div@184 {
+ usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "usb_otg_dclk_div";
clocks = <&usb_otg_clkin_ck>;
ti,max-div = <64>;
reg = <0x0184>;
ti,index-power-of-two;
};
- sata_dclk_div: sata_dclk_div@1c0 {
+ sata_dclk_div: clock-sata-dclk-div@1c0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "sata_dclk_div";
clocks = <&sys_clkin1>;
ti,max-div = <64>;
reg = <0x01c0>;
ti,index-power-of-two;
};
- pcie2_dclk_div: pcie2_dclk_div@1b8 {
+ pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "pcie2_dclk_div";
clocks = <&dpll_pcie_ref_m2_ck>;
ti,max-div = <64>;
reg = <0x01b8>;
ti,index-power-of-two;
};
- pcie_dclk_div: pcie_dclk_div@1b4 {
+ pcie_dclk_div: clock-pcie-dclk-div@1b4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "pcie_dclk_div";
clocks = <&apll_pcie_m2_ck>;
ti,max-div = <64>;
reg = <0x01b4>;
ti,index-power-of-two;
};
- emu_dclk_div: emu_dclk_div@194 {
+ emu_dclk_div: clock-emu-dclk-div@194 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "emu_dclk_div";
clocks = <&sys_clkin1>;
ti,max-div = <64>;
reg = <0x0194>;
ti,index-power-of-two;
};
- secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
+ secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "secure_32k_dclk_div";
clocks = <&secure_32k_clk_src_ck>;
ti,max-div = <64>;
reg = <0x01c4>;
ti,index-power-of-two;
};
- clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
+ clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux0_clk_mux";
clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
reg = <0x0158>;
};
- clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
+ clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux1_clk_mux";
clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
reg = <0x015c>;
};
- clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
+ clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "clkoutmux2_clk_mux";
clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
reg = <0x0160>;
};
- custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+ custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "custefuse_sys_gfclk_div";
clocks = <&sys_clkin1>;
clock-mult = <1>;
clock-div = <2>;
};
- eve_clk: eve_clk@180 {
+ eve_clk: clock-eve@180 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "eve_clk";
clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
reg = <0x0180>;
};
- hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
+ hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "hdmi_dpll_clk_mux";
clocks = <&sys_clkin1>, <&sys_clkin2>;
reg = <0x0164>;
};
- mlb_clk: mlb_clk@134 {
+ mlb_clk: clock-mlb@134 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "mlb_clk";
clocks = <&mlb_clkin_ck>;
ti,max-div = <64>;
reg = <0x0134>;
ti,index-power-of-two;
};
- mlbp_clk: mlbp_clk@130 {
+ mlbp_clk: clock-mlbp@130 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "mlbp_clk";
clocks = <&mlbp_clkin_ck>;
ti,max-div = <64>;
reg = <0x0130>;
ti,index-power-of-two;
};
- per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
+ per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_x1_gfclk2_div";
clocks = <&dpll_abe_m2_ck>;
ti,max-div = <64>;
reg = <0x0138>;
ti,index-power-of-two;
};
- timer_sys_clk_div: timer_sys_clk_div@144 {
+ timer_sys_clk_div: clock-timer-sys-clk-div@144 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "timer_sys_clk_div";
clocks = <&sys_clkin1>;
reg = <0x0144>;
ti,max-div = <2>;
};
- video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
+ video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "video1_dpll_clk_mux";
clocks = <&sys_clkin1>, <&sys_clkin2>;
reg = <0x0168>;
};
- video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
+ video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "video2_dpll_clk_mux";
clocks = <&sys_clkin1>, <&sys_clkin2>;
reg = <0x016c>;
};
- wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
+ wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "wkupaon_iclk_mux";
clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
reg = <0x0108>;
};
};
&cm_core_clocks {
- dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
+ dpll_pcie_ref_ck: clock@200 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_pcie_ref_ck";
clocks = <&sys_clkin1>, <&sys_clkin1>;
reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
};
- dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
+ dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_pcie_ref_m2ldo_ck";
clocks = <&dpll_pcie_ref_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -1132,23 +1271,26 @@
ti,invert-autoidle-bit;
};
- apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+ apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
compatible = "ti,mux-clock";
+ clock-output-names = "apll_pcie_in_clk_mux";
clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
#clock-cells = <0>;
reg = <0x021c 0x4>;
ti,bit-shift = <7>;
};
- apll_pcie_ck: apll_pcie_ck@21c {
+ apll_pcie_ck: clock@21c {
#clock-cells = <0>;
compatible = "ti,dra7-apll-clock";
+ clock-output-names = "apll_pcie_ck";
clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
reg = <0x021c>, <0x0220>;
};
- optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+ optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
compatible = "ti,divider-clock";
+ clock-output-names = "optfclk_pciephy_div";
clocks = <&apll_pcie_ck>;
#clock-cells = <0>;
reg = <0x021c>;
@@ -1157,48 +1299,54 @@
ti,max-div = <2>;
};
- apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+ apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_clkvcoldo";
clocks = <&apll_pcie_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+ apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_clkvcoldo_div";
clocks = <&apll_pcie_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- apll_pcie_m2_ck: apll_pcie_m2_ck {
+ apll_pcie_m2_ck: clock-apll-pcie-m2 {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "apll_pcie_m2_ck";
clocks = <&apll_pcie_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_per_byp_mux: dpll_per_byp_mux@14c {
+ dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_per_byp_mux";
clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
};
- dpll_per_ck: dpll_per_ck@140 {
+ dpll_per_ck: clock@140 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
- dpll_per_m2_ck: dpll_per_m2_ck@150 {
+ dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
clocks = <&dpll_per_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -1207,32 +1355,36 @@
ti,invert-autoidle-bit;
};
- func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+ func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_aon_dclk_div";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
+ dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
};
- dpll_usb_ck: dpll_usb_ck@180 {
+ dpll_usb_ck: clock@180 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};
- dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
+ dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
clocks = <&dpll_usb_ck>;
ti,max-div = <127>;
ti,autoidle-shift = <8>;
@@ -1241,9 +1393,10 @@
ti,invert-autoidle-bit;
};
- dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
+ dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_pcie_ref_m2_ck";
clocks = <&dpll_pcie_ref_ck>;
ti,max-div = <127>;
ti,autoidle-shift = <8>;
@@ -1252,15 +1405,17 @@
ti,invert-autoidle-bit;
};
- dpll_per_x2_ck: dpll_per_x2_ck {
+ dpll_per_x2_ck: clock-dpll-per-x2 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
clocks = <&dpll_per_ck>;
};
- dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
+ dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h11x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -1269,9 +1424,10 @@
ti,invert-autoidle-bit;
};
- dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
+ dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h12x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -1280,9 +1436,10 @@
ti,invert-autoidle-bit;
};
- dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
+ dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h13x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -1291,9 +1448,10 @@
ti,invert-autoidle-bit;
};
- dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
+ dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h14x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
ti,autoidle-shift = <8>;
@@ -1302,9 +1460,10 @@
ti,invert-autoidle-bit;
};
- dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
+ dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -1313,105 +1472,118 @@
ti,invert-autoidle-bit;
};
- dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+ dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo";
clocks = <&dpll_usb_ck>;
clock-mult = <1>;
clock-div = <1>;
};
- func_128m_clk: func_128m_clk {
+ func_128m_clk: clock-func-128m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_128m_clk";
clocks = <&dpll_per_h11x2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- func_12m_fclk: func_12m_fclk {
+ func_12m_fclk: clock-func-12m-fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <16>;
};
- func_24m_clk: func_24m_clk {
+ func_24m_clk: clock-func-24m {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- func_48m_fclk: func_48m_fclk {
+ func_48m_fclk: clock-func-48m-fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_48m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <4>;
};
- func_96m_fclk: func_96m_fclk {
+ func_96m_fclk: clock-func-96m-fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <2>;
};
- l3init_60m_fclk: l3init_60m_fclk@104 {
+ l3init_60m_fclk: clock-l3init-60m@104 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3init_60m_fclk";
clocks = <&dpll_usb_m2_ck>;
reg = <0x0104>;
ti,dividers = <1>, <8>;
};
- clkout2_clk: clkout2_clk@6b0 {
+ clkout2_clk: clock-clkout2-8@6b0 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "clkout2_clk";
clocks = <&clkoutmux2_clk_mux>;
ti,bit-shift = <8>;
reg = <0x06b0>;
};
- l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
+ l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "l3init_960m_gfclk";
clocks = <&dpll_usb_clkdcoldo>;
ti,bit-shift = <8>;
reg = <0x06c0>;
};
- usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
+ usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy1_always_on_clk32k";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x0640>;
};
- usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
+ usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy2_always_on_clk32k";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x0688>;
};
- usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
+ usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy3_always_on_clk32k";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x0698>;
};
- gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
+ gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpu_core_gclk_mux";
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <24>;
reg = <0x1220>;
@@ -1419,9 +1591,10 @@
assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
- gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
+ gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpu_hyd_gclk_mux";
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
ti,bit-shift = <26>;
reg = <0x1220>;
@@ -1429,34 +1602,38 @@
assigned-clock-parents = <&dpll_gpu_m2_ck>;
};
- l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
+ l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3instr_ts_gclk_div";
clocks = <&wkupaon_iclk_mux>;
ti,bit-shift = <24>;
reg = <0x0e50>;
ti,dividers = <8>, <16>, <32>;
};
- vip1_gclk_mux: vip1_gclk_mux@1020 {
+ vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "vip1_gclk_mux";
clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
ti,bit-shift = <24>;
reg = <0x1020>;
};
- vip2_gclk_mux: vip2_gclk_mux@1028 {
+ vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "vip2_gclk_mux";
clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
ti,bit-shift = <24>;
reg = <0x1028>;
};
- vip3_gclk_mux: vip3_gclk_mux@1030 {
+ vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "vip3_gclk_mux";
clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
ti,bit-shift = <24>;
reg = <0x1030>;
@@ -1464,48 +1641,54 @@
};
&cm_core_clockdomains {
- coreaon_clkdm: coreaon_clkdm {
+ coreaon_clkdm: clock-coreaon-clkdm {
compatible = "ti,clockdomain";
+ clock-output-names = "coreaon_clkdm";
clocks = <&dpll_usb_ck>;
};
};
&scm_conf_clocks {
- dss_deshdcp_clk: dss_deshdcp_clk@558 {
+ dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "dss_deshdcp_clk";
clocks = <&l3_iclk_div>;
ti,bit-shift = <0>;
reg = <0x558>;
};
- ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
+ ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm0_tbclk";
clocks = <&l4_root_clk_div>;
ti,bit-shift = <20>;
reg = <0x0558>;
};
- ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
+ ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm1_tbclk";
clocks = <&l4_root_clk_div>;
ti,bit-shift = <21>;
reg = <0x0558>;
};
- ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
+ ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "ehrpwm2_tbclk";
clocks = <&l4_root_clk_div>;
ti,bit-shift = <22>;
reg = <0x0558>;
};
- sys_32k_ck: sys_32k_ck {
+ sys_32k_ck: clock-sys-32k {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_32k_ck";
clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
ti,bit-shift = <8>;
reg = <0x6c4>;
@@ -1513,97 +1696,110 @@
};
&cm_core_aon {
- mpu_cm: mpu-cm@300 {
+ mpu_cm: clock@300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
reg = <0x300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x300 0x100>;
- mpu_clkctrl: mpu-clkctrl@20 {
+ mpu_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- dsp1_cm: dsp1-cm@400 {
+ dsp1_cm: clock@400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dsp1_cm";
reg = <0x400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x400 0x100>;
- dsp1_clkctrl: dsp1-clkctrl@20 {
+ dsp1_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dsp1_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- ipu_cm: ipu-cm@500 {
+ ipu_cm: clock@500 {
compatible = "ti,omap4-cm";
+ clock-output-names = "ipu_cm";
reg = <0x500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x500 0x100>;
- ipu1_clkctrl: ipu1-clkctrl@20 {
+ ipu1_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "ipu1_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
assigned-clock-parents = <&dpll_core_h22x2_ck>;
};
- ipu_clkctrl: ipu-clkctrl@50 {
+ ipu_clkctrl: clock@50 {
compatible = "ti,clkctrl";
+ clock-output-names = "ipu_clkctrl";
reg = <0x50 0x34>;
#clock-cells = <2>;
};
};
- dsp2_cm: dsp2-cm@600 {
+ dsp2_cm: clock@600 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dsp2_cm";
reg = <0x600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x100>;
- dsp2_clkctrl: dsp2-clkctrl@20 {
+ dsp2_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dsp2_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- rtc_cm: rtc-cm@700 {
+ rtc_cm: clock@700 {
compatible = "ti,omap4-cm";
+ clock-output-names = "rtc_cm";
reg = <0x700 0x60>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x700 0x60>;
- rtc_clkctrl: rtc-clkctrl@20 {
+ rtc_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "rtc_clkctrl";
reg = <0x20 0x28>;
#clock-cells = <2>;
};
};
- vpe_cm: vpe-cm@760 {
+ vpe_cm: clock@760 {
compatible = "ti,omap4-cm";
+ clock-output-names = "vpe_cm";
reg = <0x760 0xc>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x760 0xc>;
- vpe_clkctrl: vpe-clkctrl@0 {
+ vpe_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "vpe_clkctrl";
reg = <0x0 0xc>;
#clock-cells = <2>;
};
@@ -1612,212 +1808,242 @@
};
&cm_core {
- coreaon_cm: coreaon-cm@600 {
+ coreaon_cm: clock@600 {
compatible = "ti,omap4-cm";
+ clock-output-names = "coreaon_cm";
reg = <0x600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x100>;
- coreaon_clkctrl: coreaon-clkctrl@20 {
+ coreaon_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "coreaon_clkctrl";
reg = <0x20 0x1c>;
#clock-cells = <2>;
};
};
- l3main1_cm: l3main1-cm@700 {
+ l3main1_cm: clock@700 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3main1_cm";
reg = <0x700 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x700 0x100>;
- l3main1_clkctrl: l3main1-clkctrl@20 {
+ l3main1_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3main1_clkctrl";
reg = <0x20 0x74>;
#clock-cells = <2>;
};
};
- ipu2_cm: ipu2-cm@900 {
+ ipu2_cm: clock@900 {
compatible = "ti,omap4-cm";
+ clock-output-names = "ipu2_cm";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x900 0x100>;
- ipu2_clkctrl: ipu2-clkctrl@20 {
+ ipu2_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "ipu2_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- dma_cm: dma-cm@a00 {
+ dma_cm: clock@a00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dma_cm";
reg = <0xa00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xa00 0x100>;
- dma_clkctrl: dma-clkctrl@20 {
+ dma_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dma_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- emif_cm: emif-cm@b00 {
+ emif_cm: clock@b00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "emif_cm";
reg = <0xb00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xb00 0x100>;
- emif_clkctrl: emif-clkctrl@20 {
+ emif_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- atl_cm: atl-cm@c00 {
+ atl_cm: clock@c00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "atl_cm";
reg = <0xc00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xc00 0x100>;
- atl_clkctrl: atl-clkctrl@0 {
+ atl_clkctrl: clock@0 {
compatible = "ti,clkctrl";
+ clock-output-names = "atl_clkctrl";
reg = <0x0 0x4>;
#clock-cells = <2>;
};
};
- l4cfg_cm: l4cfg-cm@d00 {
+ l4cfg_cm: clock@d00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4cfg_cm";
reg = <0xd00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xd00 0x100>;
- l4cfg_clkctrl: l4cfg-clkctrl@20 {
+ l4cfg_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4cfg_clkctrl";
reg = <0x20 0x84>;
#clock-cells = <2>;
};
};
- l3instr_cm: l3instr-cm@e00 {
+ l3instr_cm: clock@e00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3instr_cm";
reg = <0xe00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xe00 0x100>;
- l3instr_clkctrl: l3instr-clkctrl@20 {
+ l3instr_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3instr_clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
};
- iva_cm: iva-cm@f00 {
+ iva_cm: clock@f00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "iva_cm";
reg = <0xf00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xf00 0x100>;
- iva_clkctrl: iva-clkctrl@20 {
+ iva_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "iva_clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
};
- cam_cm: cam-cm@1000 {
+ cam_cm: clock@1000 {
compatible = "ti,omap4-cm";
+ clock-output-names = "cam_cm";
reg = <0x1000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1000 0x100>;
- cam_clkctrl: cam-clkctrl@20 {
+ cam_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "cam_clkctrl";
reg = <0x20 0x2c>;
#clock-cells = <2>;
};
};
- dss_cm: dss-cm@1100 {
+ dss_cm: clock@1100 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dss_cm";
reg = <0x1100 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1100 0x100>;
- dss_clkctrl: dss-clkctrl@20 {
+ dss_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
reg = <0x20 0x14>;
#clock-cells = <2>;
};
};
- gpu_cm: gpu-cm@1200 {
+ gpu_cm: clock@1200 {
compatible = "ti,omap4-cm";
+ clock-output-names = "gpu_cm";
reg = <0x1200 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1200 0x100>;
- gpu_clkctrl: gpu-clkctrl@20 {
+ gpu_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "gpu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- l3init_cm: l3init-cm@1300 {
+ l3init_cm: clock@1300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3init_cm";
reg = <0x1300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1300 0x100>;
- l3init_clkctrl: l3init-clkctrl@20 {
+ l3init_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3init_clkctrl";
reg = <0x20 0x6c>, <0xe0 0x14>;
#clock-cells = <2>;
};
- pcie_clkctrl: pcie-clkctrl@b0 {
+ pcie_clkctrl: clock@b0 {
compatible = "ti,clkctrl";
+ clock-output-names = "pcie_clkctrl";
reg = <0xb0 0xc>;
#clock-cells = <2>;
};
- gmac_clkctrl: gmac-clkctrl@d0 {
+ gmac_clkctrl: clock@d0 {
compatible = "ti,clkctrl";
+ clock-output-names = "gmac_clkctrl";
reg = <0xd0 0x4>;
#clock-cells = <2>;
};
};
- l4per_cm: l4per-cm@1700 {
+ l4per_cm: clock@1700 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4per_cm";
reg = <0x1700 0x300>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1700 0x300>;
- l4per_clkctrl: l4per-clkctrl@28 {
+ l4per_clkctrl: clock@28 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4per_clkctrl";
reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
#clock-cells = <2>;
@@ -1825,20 +2051,23 @@
assigned-clock-parents = <&abe_24m_fclk>;
};
- l4sec_clkctrl: l4sec-clkctrl@1a0 {
+ l4sec_clkctrl: clock@1a0 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4sec_clkctrl";
reg = <0x1a0 0x2c>;
#clock-cells = <2>;
};
- l4per2_clkctrl: l4per2-clkctrl@c {
+ l4per2_clkctrl: clock@c {
compatible = "ti,clkctrl";
+ clock-output-names = "l4per2_clkctrl";
reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
#clock-cells = <2>;
};
- l4per3_clkctrl: l4per3-clkctrl@14 {
+ l4per3_clkctrl: clock@14 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4per3_clkctrl";
reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
#clock-cells = <2>;
};
@@ -1847,15 +2076,17 @@
};
&prm {
- wkupaon_cm: wkupaon-cm@1800 {
+ wkupaon_cm: clock@1800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "wkupaon_cm";
reg = <0x1800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1800 0x100>;
- wkupaon_clkctrl: wkupaon-clkctrl@20 {
+ wkupaon_clkctrl: clock@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "wkupaon_clkctrl";
reg = <0x20 0x6c>;
#clock-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index ae644315855d..78dad233ff34 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -269,7 +269,8 @@
};
timer@10050000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos3250-mct",
+ "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
@@ -428,8 +429,6 @@
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@12690000 {
@@ -439,8 +438,6 @@
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
adc: adc@126c0000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e81b3ee4e0f7..6f0ca3354e39 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -373,7 +373,7 @@
status = "disabled";
};
- ehci: ehci@12580000 {
+ ehci: usb@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -384,7 +384,7 @@
phy-names = "host", "hsic0", "hsic1";
};
- ohci: ohci@12590000 {
+ ohci: usb@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
@@ -676,8 +676,6 @@
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@12690000 {
@@ -687,8 +685,6 @@
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
mdma1: dma-controller@12850000 {
@@ -698,8 +694,6 @@
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
};
fimd: fimd@11c00000 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 138d606d58a5..62bf335d5bed 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -666,8 +666,6 @@
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
power-domains = <&pd_lcd0>;
};
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index efaf7533e84f..36c369c42b77 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -119,8 +119,8 @@
phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
phy-names = "hsic0", "hsic1";
- ethernet: usbether@2 {
- compatible = "usb0424,9730";
+ ethernet: ethernet@2 {
+ compatible = "usb424,9730";
reg = <2>;
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index a9fada51eb50..1f17cc30ed14 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -70,19 +70,19 @@
phy-names = "hsic0";
hub@2 {
- compatible = "usb0424,3503";
+ compatible = "usb424,3503";
reg = <2>;
#address-cells = <1>;
#size-cells = <0>;
hub@1 {
- compatible = "usb0424,9514";
+ compatible = "usb424,9514";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
- compatible = "usb0424,ec00";
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
reg = <1>;
/* Filled in by a bootloader */
local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 21fbbf3d8684..71293749ac48 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -129,7 +129,7 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@50 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x50>;
};
@@ -289,7 +289,7 @@
samsung,i2c-max-bus-freq = <20000>;
eeprom@51 {
- compatible = "samsung,s524ad0xd1";
+ compatible = "samsung,s524ad0xd1", "atmel,24c128";
reg = <0x51>;
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 5baaa7eb71a4..4708dcd575a7 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -245,7 +245,8 @@
};
timer@101c0000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos5250-mct",
+ "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
@@ -699,8 +700,6 @@
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@121b0000 {
@@ -710,8 +709,6 @@
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
mdma0: dma-controller@10800000 {
@@ -721,8 +718,6 @@
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
};
mdma1: dma-controller@11c10000 {
@@ -732,8 +727,6 @@
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
};
gsc_0: gsc@13e00000 {
@@ -817,15 +810,14 @@
status = "disabled";
};
- dp_phy: video-phy {
+ dp_phy: video-phy-0 {
compatible = "samsung,exynos5250-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
- mipi_phy: video-phy@10040710 {
+ mipi_phy: video-phy-1 {
compatible = "samsung,s5pv210-mipi-video-phy";
- reg = <0x10040710 0x100>;
#phy-cells = <1>;
syscon = <&pmu_system_controller>;
};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 56271e7c4587..ff1ee409eff3 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -333,7 +333,8 @@
};
mct: timer@100b0000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos5260-mct",
+ "samsung,exynos4210-mct";
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index e54a3391854d..d1cbc6b8a570 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -655,8 +655,8 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@2 {
- compatible = "usb0424,9730";
+ ethernet: ethernet@2 {
+ compatible = "usb424,9730";
reg = <2>;
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 4d797a9abba4..8a6b890fb8f7 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -196,8 +196,6 @@
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@121b0000 {
@@ -207,8 +205,6 @@
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
audi2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 21b608705049..9f2523a873d9 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -437,8 +437,6 @@
clocks = <&clock_audss EXYNOS_ADMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <6>;
- #dma-requests = <16>;
power-domains = <&mau_pd>;
};
@@ -449,8 +447,6 @@
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@121b0000 {
@@ -460,8 +456,6 @@
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
mdma0: dma-controller@10800000 {
@@ -471,8 +465,6 @@
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
};
mdma1: dma-controller@11c10000 {
@@ -482,8 +474,6 @@
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 2f65dcf6ba73..35818c4cd852 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -333,8 +333,6 @@
compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
density = <16384>;
io-width = <32>;
- #address-cells = <1>;
- #size-cells = <0>;
tRFC-min-tck = <17>;
tRRD-min-tck = <2>;
@@ -358,10 +356,9 @@
tCKESR-min-tck = <2>;
tMRD-min-tck = <5>;
- timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
+ timings_samsung_K3QF2F20DB_800mhz: timings {
compatible = "jedec,lpddr3-timings";
- /* workaround: 'reg' shows max-freq */
- reg = <800000000>;
+ max-freq = <800000000>;
min-freq = <100000000>;
tRFC = <65000>;
tRRD = <6000>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 62c5928aa994..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -113,13 +113,13 @@
#size-cells = <0>;
hub@1 {
- compatible = "usb0424,9514";
+ compatible = "usb424,9514";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
- compatible = "usb0424,ec00";
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
reg = <1>;
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index cecaeb69e623..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -80,13 +80,13 @@
#size-cells = <0>;
hub@1 {
- compatible = "usb0424,9514";
+ compatible = "usb424,9514";
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
- compatible = "usb0424,ec00";
+ ethernet: ethernet@1 {
+ compatible = "usb424,ec00";
reg = <1>;
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 2ddb7a5f12b3..3ec43761d8b9 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -74,7 +74,8 @@
};
mct: timer@101c0000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos5420-mct",
+ "samsung,exynos4210-mct";
reg = <0x101c0000 0xb00>;
interrupts-extended = <&combiner 23 3>,
<&combiner 23 4>,
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index fd525c3b16fa..b660c7d05584 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -96,7 +96,7 @@
<&clks IMX27_CLK_DMA_AHB_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <1>;
- #dma-channels = <16>;
+ dma-channels = <16>;
};
wdog: watchdog@10002000 {
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..1053b7c584d8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -129,7 +129,7 @@
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf016b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..13acdc7916b9 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -33,7 +33,7 @@
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..90928db0df70 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -51,7 +51,7 @@
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256", "mr25h256";
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
index aab8d6f137c3..10cae7c3a879 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -13,6 +13,13 @@
chosen {
stdout-path = &uart1;
};
+
+ usbphy1: usbphy1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+ clock-names = "main_clk";
+ #phy-cells = <0>;
+ };
};
&esdhc1 {
@@ -63,6 +70,7 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
+ fsl,usbphy = <&usbphy1>;
dr_mode = "host";
phy_type = "ulpi";
disable-over-current;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 7d4970417dce..f0809a16a2ce 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -34,22 +34,22 @@
regulators {
sw1_reg: sw1 {
- regulator-min-microvolt = <1000000>;
+ regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: sw2 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1275000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: sw3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
@@ -102,18 +102,6 @@
regulator-always-on;
};
- vgen1_reg: vgen1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- vgen2_reg: vgen2 {
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
- regulator-always-on;
- };
-
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -124,8 +112,6 @@
regulator-always-on;
};
- gpo1_reg: gpo1 { };
-
gpo2_reg: gpo2 { };
gpo3_reg: gpo3 { };
@@ -198,6 +184,7 @@
&usbotg {
phy_type = "utmi_wide";
disable-over-current;
+ vbus-supply = <&swbst_reg>;
/* Device role is not known, keep status disabled */
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 56c8d87864c3..1e20a6639e42 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -215,6 +215,8 @@
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
<&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
+ dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -426,6 +428,8 @@
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
<&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
+ dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -436,6 +440,8 @@
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
<&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
+ dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+ dma-names = "rx", "tx";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..74e8a6cd8bed
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+ compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+
+ aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/* Colibri SSP */
+&ecspi4 {
+ cs-gpios = <
+ &gpio5 2 GPIO_ACTIVE_HIGH
+ &gpio5 4 GPIO_ACTIVE_HIGH
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+ status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_csi_gpio_1
+ &pinctrl_gpio_2
+ &pinctrl_gpio_aster
+ &pinctrl_usbh_oc_1
+ &pinctrl_usbc_id_1
+ &pinctrl_weim_gpio_5
+ >;
+
+ pinctrl_gpio_aster: gpioaster {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ >;
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&reg_usb_host_vbus {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
index 7da74e6f46d9..7272edd85a49 100644
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
@@ -17,12 +17,6 @@
compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
"fsl,imx6dl";
- /* Will be filled by the bootloader */
- memory@10000000 {
- device_type = "memory";
- reg = <0x10000000 0>;
- };
-
aliases {
i2c0 = &i2c2;
i2c1 = &i2c3;
@@ -44,67 +38,6 @@
clock-frequency = <16000000>;
clock-output-names = "clk16m";
};
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_keys>;
-
- wakeup {
- label = "Wake-Up";
- gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
- lcd_display: disp0 {
- compatible = "fsl,imx-parallel-display";
- #address-cells = <1>;
- #size-cells = <0>;
- interface-pix-fmt = "bgr666";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_lcdif>;
- status = "okay";
-
- port@0 {
- reg = <0>;
-
- lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp0>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- lcd_display_out: endpoint {
- remote-endpoint = <&lcd_panel_in>;
- };
- };
- };
-
- panel: panel {
- /*
- * edt,et057090dhu: EDT 5.7" LCD TFT
- * edt,et070080dh6: EDT 7.0" LCD TFT
- */
- compatible = "edt,et057090dhu";
- backlight = <&backlight>;
-
- port {
- lcd_panel_in: endpoint {
- remote-endpoint = <&lcd_display_out>;
- };
- };
- };
-};
-
-&backlight {
- brightness-levels = <0 127 191 223 239 247 251 255>;
- default-brightness-level = <1>;
- status = "okay";
};
/* Colibri SSP */
@@ -113,40 +46,21 @@
mcp251x0: mcp251x@0 {
compatible = "microchip,mcp2515";
- reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio3>;
interrupts = <27 0x2>;
+ reg = <0>;
spi-max-frequency = <10000000>;
status = "okay";
};
};
-&hdmi {
- status = "okay";
-};
-
/*
* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
*/
&i2c3 {
status = "okay";
- /*
- * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>,
- * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms
- */
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pcap_1>;
- reg = <0x4a>;
- interrupt-parent = <&gpio1>;
- interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 28 */
- reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; /* SODIMM 30 */
- status = "disabled";
- };
-
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t0";
@@ -162,24 +76,6 @@
&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
>;
-
- pinctrl_pcap_1: pcap1grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* SODIMM 28 */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SODIMM 30 */
- >;
- };
-
- pinctrl_mxt_ts: mxttsgrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x130b0 /* SODIMM 107 */
- MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x130b0 /* SODIMM 106 */
- >;
- };
-};
-
-&ipu1_di0_disp0 {
- remote-endpoint = <&lcd_display_in>;
};
&pwm1 {
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 000000000000..3a6d3889760d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+ compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+
+ reg_3v3_vmmc: regulator-3v3-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+ regulator-name = "3v3_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_iris &pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+ pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ >;
+ };
+};
+
+/* Colibri MMC */
+&usdhc1 {
+ cap-power-off-card;
+ /* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+ /* /delete-property/ no-1-8-v; */
+ vmmc-supply = <&reg_3v3_vmmc>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
new file mode 100644
index 000000000000..cf77d894f6d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+ compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+ "fsl,imx6dl";
+
+ aliases {
+ i2c0 = &i2c2;
+ i2c1 = &i2c3;
+ };
+
+ aliases {
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+/* Colibri SSP */
+&ecspi4 {
+ status = "okay";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+ /*
+ * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+ * wants to turn the transceiver off, that property has to be deleted
+ * and the gpio handled in userspace.
+ * The same applies to uart-b-c-on-x14-enable where the UART_B and
+ * UART_C transceiver is turned on.
+ */
+ uart-a-on-x13-enable-hog {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+ output-high;
+ };
+
+ uart-b-c-on-x14-enable-hog {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+ output-high;
+ };
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+ status = "okay";
+
+ rtc_i2c: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_gpio_iris
+ &pinctrl_usbh_oc_1
+ &pinctrl_usbc_id_1
+ >;
+
+ pinctrl_gpio_iris: gpioirisgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1_forceoff: uart1forceoffgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart23_forceoff: uart23forceoffgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ >;
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&reg_usb_host_vbus {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_host_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
deleted file mode 100644
index 223275f028f1..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "imx6dl-colibri-eval-v3.dts"
-#include "imx6qdl-colibri-v1_1-uhs.dtsi"
-
-/ {
- model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
- compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
- "toradex,colibri_imx6dl-v1_1",
- "toradex,colibri_imx6dl-eval-v3",
- "toradex,colibri_imx6dl",
- "fsl,imx6dl";
-};
-
-/* Colibri MMC */
-&usdhc1 {
- status = "okay";
- /*
- * Please make sure your carrier board does not pull-up any of
- * the MMC/SD signals to 3.3 volt before attempting to activate
- * UHS-I support.
- * To let signaling voltage be changed to 1.8V, please
- * delete no-1-8-v property (example below):
- * /delete-property/no-1-8-v;
- */
-};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
index b4a9523e325b..864dc5018451 100644
--- a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -297,7 +297,11 @@
phy-mode = "rmii";
phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
phy-handle = <&phy>;
- clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&rmii_clk>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
status = "okay";
mdio {
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
index bf72a67a9c76..c52e6caf3996 100644
--- a/arch/arm/boot/dts/imx6dl-plybas.dts
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -214,7 +214,7 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
linux,rs485-enabled-at-boot-time;
rs485-rts-delay = <0 20>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@
};
&ecspi3 {
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index 227c952543d4..516ec915a911 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -5,46 +5,13 @@
*/
/dts-v1/;
-#include <dt-bindings/display/sdtv-standards.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/media/tvp5150.h>
-#include <dt-bindings/sound/fsl-imx-audmux.h>
#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
/ {
model = "Kverneland TGO";
compatible = "kvg,victgo", "fsl,imx6dl";
- chosen {
- stdout-path = &uart4;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm1 0 5000000 0>;
- brightness-levels = <0 16 64 255>;
- num-interpolated-steps = <16>;
- default-brightness-level = <1>;
- power-supply = <&reg_3v3>;
- enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
- };
-
- connector {
- compatible = "composite-video-connector";
- label = "Composite0";
- sdtv-standards = <SDTV_STD_PAL_B>;
-
- port {
- comp0_out: endpoint {
- remote-endpoint = <&tvp5150_comp0_in>;
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -71,36 +38,9 @@
io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds>;
-
- led-0 {
- label = "debug0";
- function = LED_FUNCTION_HEARTBEAT;
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- led-1 {
- label = "debug1";
- function = LED_FUNCTION_DISK;
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "disk-activity";
- };
-
- led-2 {
- label = "power_led";
- function = LED_FUNCTION_POWER;
- gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
panel {
- compatible = "kyo,tcg121xglp";
- backlight = <&backlight>;
+ compatible = "lg,lb070wv8";
+ backlight = <&backlight_lcd>;
power-supply = <&reg_3v3>;
port {
@@ -116,38 +56,6 @@
clock-frequency = <50000000>;
};
- reg_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- reg_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- reg_h1_vbus: regulator-h1-vbus {
- compatible = "regulator-fixed";
- regulator-name = "h1-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_otg_vbus: regulator-otg-vbus {
- compatible = "regulator-fixed";
- regulator-name = "otg-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
rotary-encoder {
compatible = "rotary-encoder";
pinctrl-0 = <&pinctrl_rotary_ch>;
@@ -160,33 +68,6 @@
wakeup-source;
};
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "prti6q-sgtl5000";
- simple-audio-card,format = "i2s";
- simple-audio-card,widgets =
- "Microphone", "Microphone Jack",
- "Line", "Line In Jack",
- "Headphone", "Headphone Jack",
- "Speaker", "External Speaker";
- simple-audio-card,routing =
- "MIC_IN", "Microphone Jack",
- "LINE_IN", "Line In Jack",
- "Headphone Jack", "HP_OUT",
- "External Speaker", "LINE_OUT";
-
- simple-audio-card,cpu {
- sound-dai = <&ssi1>;
- system-clock-frequency = <0>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&codec>;
- bitclock-master;
- frame-master;
- };
- };
-
thermal-zones {
chassis-thermal {
polling-delay = <20000>;
@@ -213,7 +94,6 @@
<&adc_ts 5>;
io-channel-names = "y", "z1", "z2", "x";
touchscreen-min-pressure = <64687>;
- touchscreen-inverted-x;
touchscreen-inverted-y;
touchscreen-x-plate-ohms = <300>;
touchscreen-y-plate-ohms = <800>;
@@ -254,61 +134,6 @@
};
};
-&audmux {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux>;
- status = "okay";
-
- mux-ssi1 {
- fsl,audmux-port = <0>;
- fsl,port-config = <
- IMX_AUDMUX_V2_PTCR_SYN 0
- IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
- IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
- IMX_AUDMUX_V2_PTCR_TFSDIR 0
- IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
- >;
- };
-
- mux-pins3 {
- fsl,audmux-port = <2>;
- fsl,port-config = <
- IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
- 0 IMX_AUDMUX_V2_PDCR_TXRXEN
- >;
- };
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1>;
- status = "okay";
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2>;
- status = "okay";
-};
-
-&clks {
- assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
- assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
-};
-
-&ecspi1 {
- cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
- };
-};
-
&ecspi2 {
cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -385,36 +210,19 @@
"CAM2_MIRROR", "", "", "SMBALERT",
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
- "SD1_DATA3", "", "",
- "", "", "", "", "", "", "", "";
-};
-
-&gpio2 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
- "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
- "", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
- "POWER_LED", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
- gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
- "CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
- "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
- "YACO_RESET";
+ "SD1_DATA3", "ETH_MDIO", "",
+ "", "", "", "", "", "", "", "ETH_MDC";
};
&gpio4 {
gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
- "", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
- "CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
- "BL_PWM", "ETH_INTRP", "ISB_LED";
+ "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+ "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+ "CAN2_SR", "CAN2_TX", "CAN2_RX",
+ "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+ "HITCH_IN_OUT",
+ "LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+ "BL_PWM", "ETH_INT", "ISB_LED";
};
&gpio5 {
@@ -422,51 +230,22 @@
"", "", "", "", "", "", "", "",
"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
- "", "", "", "", "", "", "", "",
+ "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+ "I2S_BITCLK", "I2S_DOUT",
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
};
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
- codec: audio-codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0xa>;
- #sound-dai-cells = <0>;
- clocks = <&clks 201>;
- VDDA-supply = <&reg_3v3>;
- VDDIO-supply = <&reg_3v3>;
- VDDD-supply = <&reg_1v8>;
- };
-
- video-decoder@5c {
- compatible = "ti,tvp5150";
- reg = <0x5c>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tvp5150_comp0_in: endpoint {
- remote-endpoint = <&comp0_out>;
- };
- };
-
- /* Output port 2 is video output pad */
- port@2 {
- reg = <2>;
-
- tvp5151_to_ipu1_csi0_mux: endpoint {
- remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
- };
- };
- };
+&gpio6 {
+ gpio-line-names =
+ "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+ "ITU656_D6", "ITU656_D7", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+&i2c1 {
keypad@70 {
compatible = "holtek,ht16k33";
pinctrl-names = "default";
@@ -490,225 +269,9 @@
MATRIX_KEY(6, 1, KEY_F1)
>;
};
-
- /* additional i2c devices are added automatically by the boot loader */
-};
-
-&i2c3 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- status = "okay";
-
- adc@49 {
- compatible = "ti,ads1015";
- reg = <0x49>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@4 {
- reg = <4>;
- ti,gain = <3>;
- ti,datarate = <3>;
- };
-
- channel@5 {
- reg = <5>;
- ti,gain = <3>;
- ti,datarate = <3>;
- };
-
- channel@6 {
- reg = <6>;
- ti,gain = <3>;
- ti,datarate = <3>;
- };
-
- channel@7 {
- reg = <7>;
- ti,gain = <3>;
- ti,datarate = <3>;
- };
- };
-
- rtc@51 {
- compatible = "nxp,pcf8563";
- reg = <0x51>;
- };
-
- tsens0: temperature-sensor@70 {
- compatible = "ti,tmp103";
- reg = <0x70>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&ipu1_csi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ipu1_csi0>;
- status = "okay";
-};
-
-&ipu1_csi0_mux_from_parallel_sensor {
- remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
-};
-
-&ldb {
- status = "okay";
-
- lvds-channel@0 {
- status = "okay";
-
- port@4 {
- reg = <4>;
-
- lvds0_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
- };
-};
-
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
-&pwm3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm3>;
- status = "okay";
-};
-
-&ssi1 {
- #sound-dai-cells = <0>;
- fsl,mode = "ac97-slave";
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
-&uart5 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart5>;
- status = "okay";
-};
-
-&usbh1 {
- vbus-supply = <&reg_h1_vbus>;
- pinctrl-names = "default";
- phy_type = "utmi";
- dr_mode = "host";
- status = "okay";
-};
-
-&usbotg {
- vbus-supply = <&reg_otg_vbus>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg>;
- phy_type = "utmi";
- dr_mode = "host";
- disable-over-current;
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- disable-wp;
- cap-sd-highspeed;
- no-mmc;
- no-sdio;
- status = "okay";
-};
-
-&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- bus-width = <8>;
- no-1-8-v;
- non-removable;
- no-sd;
- no-sdio;
- status = "okay";
};
&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
- MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
- MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
- MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
- MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
- >;
- };
-
- pinctrl_backlight: backlightgrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
- >;
- };
-
- pinctrl_can1: can1grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
- MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
- /* CAN1_SR */
- MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
- /* CAN1_TERM */
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
- >;
- };
-
- pinctrl_can2: can2grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
- MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
- /* CAN2_SR */
- MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
- >;
- };
-
- pinctrl_ecspi1: ecspi1grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
- MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
- MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
- /* CS */
- MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
- >;
- };
-
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
@@ -747,113 +310,12 @@
>;
};
- pinctrl_hog: hoggrp {
- fsl,pins = <
- /* ITU656_nRESET */
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
- /* CAM1_MIRROR */
- MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
- /* CAM2_MIRROR */
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
- /* CAM_nDETECT */
- MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
- /* ISB_IN1 */
- MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
- /* ISB_nIN2 */
- MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
- /* WARN_LIGHT */
- MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
- /* ON2_FB */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
- /* YACO_nIRQ */
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
- /* YACO_BOOT0 */
- MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
- /* YACO_nRESET */
- MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
- /* FORCE_ON1 */
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
- /* AUDIO_nRESET */
- MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
- /* ITU656_nPDN */
- MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
-
- /* HW revision detect */
- /* REV_ID0 */
- MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
- /* REV_ID1 is shared with PWM3 */
- /* REV_ID2 */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
- /* REV_ID3 */
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
- /* REV_ID4 */
- MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-
- /* New in HW revision 1 */
- /* ON1_FB */
- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
- /* DIP1_FB */
- MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
- MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_ipu1_csi0: ipu1csi0grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
- MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
- MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
- MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
- MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
- MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
- MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
- MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
- MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
- >;
- };
-
pinctrl_keypad: keypadgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
>;
};
- pinctrl_leds: ledsgrp {
- fsl,pins = <
- /* DEBUG0 */
- MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
- /* DEBUG1 */
- MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
- /* POWER_LED */
- MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
- >;
- };
-
- pinctrl_pwm1: pwm1grp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
- >;
- };
-
- pinctrl_pwm3: pwm3grp {
- fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0
- >;
- };
-
pinctrl_rotary_ch: rotarychgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
@@ -867,77 +329,4 @@
MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
>;
};
-
- /* YaCO AUX Uart */
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
-
- /* YaCO Touchscreen UART */
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_uart5: uart5grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
- /* power enable, high active */
- MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
- MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
- MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
- MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
- MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
- MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
- MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
index 174fd913bf96..5035d303447d 100644
--- a/arch/arm/boot/dts/imx6dl-vicut1.dts
+++ b/arch/arm/boot/dts/imx6dl-vicut1.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1 Board";
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 6330d75f8f39..f266f1b7e0cf 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -142,7 +142,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: n25q032@0 {
+ flash: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
new file mode 100644
index 000000000000..8768222e183e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+ model = "Bosch ACC";
+ compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+ aliases {
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ mmc0 = &usdhc4;
+ mmc1 = &usdhc2;
+ serial0 = &uart2;
+ serial1 = &uart1;
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 200000>;
+ brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+ num-interpolated-steps = <10>;
+ default-brightness-level = <60>;
+ power-supply = <&reg_lcd>;
+ };
+
+ panel {
+ compatible = "dataimage,fg1001l0dsswmg01";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ refclk: refclk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_CKO2>;
+ clock-div = <1>;
+ clock-mult = <1>;
+ clock-output-names = "12mhz_refclk";
+ assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+ <&clks IMX6QDL_CLK_CKO2>,
+ <&clks IMX6QDL_CLK_CKO2_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+ <&clks IMX6QDL_CLK_CKO2_PODF>,
+ <&clks IMX6QDL_CLK_OSC>;
+ assigned-clock-rates = <0>, <12000000>, <0>;
+ };
+
+ cpus {
+ cpu0: cpu@0 {
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1225000
+ 852000 1225000
+ 792000 1150000
+ 396000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1225000
+ 996000 1175000
+ 852000 1175000
+ 792000 1150000
+ 396000 1150000
+ >;
+ };
+
+ cpu1: cpu@1 {
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1225000
+ 852000 1225000
+ 792000 1150000
+ 396000 950000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1225000
+ 996000 1175000
+ 852000 1175000
+ 792000 1150000
+ 396000 1150000
+ >;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led_red: led-0 {
+ color = <LED_COLOR_ID_RED>;
+ max-brightness = <248>;
+ default-state = "off";
+ pwms = <&pwm2 0 500000>;
+ };
+
+ led_white: led-1 {
+ color = <LED_COLOR_ID_WHITE>;
+ max-brightness = <248>;
+ default-state = "off";
+ pwms = <&pwm3 0 500000>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ reg_5p0: regulator-5p0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5p0";
+ };
+
+ reg_vin: regulator-vin {
+ compatible = "regulator-fixed";
+ regulator-name = "VIN";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <4500000>;
+ regulator-always-on;
+ vin-supply = <&reg_5p0>;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_h1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&reg_5p0>;
+ };
+
+ reg_usb_h2_vbus: regulator-usb-h2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_5p0> ;
+ regulator-always-on;
+ };
+
+ reg_vsnvs: regulator-vsnvs {
+ compatible = "regulator-fixed";
+ regulator-name = "VSNVS_3V0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ vin-supply = <&reg_5p0>;
+ };
+
+ reg_lcd: regulator-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD0 POWER";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_enable>;
+ gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_dac: regulator-dac {
+ compatible = "regulator-fixed";
+ regulator-name = "vref_dac";
+ regulator-min-microvolt = <20000>;
+ regulator-max-microvolt = <20000>;
+ vin-supply = <&reg_5p0> ;
+ regulator-boot-on;
+ };
+
+ reg_sw4: regulator-sw4 {
+ compatible = "regulator-fixed";
+ regulator-name = "SW4_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&reg_5p0>;
+ };
+
+ reg_sys: regulator-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "SYS_4V2";
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ vin-supply = <&reg_5p0>;
+ };
+};
+
+&reg_arm {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+ vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+ vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+ vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
+ phy-mode = "rmii";
+ phy-supply = <&reg_sw4>;
+ phy-handle = <&ethphy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ smsc,disable-energy-detect;
+ };
+ };
+};
+
+&gpu_vg {
+ status = "disabled";
+};
+
+&gpu_2d {
+ status = "disabled";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ pmic: pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ sw1c_reg: sw1c {
+ regulator-name = "VDD_SOC (sw1abc)";
+ regulator-min-microvolt = <1275000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-name = "VDD_ARM (sw2)";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw3a_reg: sw3a {
+ compatible = "regulator-fixed";
+ regulator-name = "DDR_1V5a";
+ regulator-boot-on;
+ regulator-always-on;
+
+ };
+
+ sw3b_reg: sw3b {
+ compatible = "regulator-fixed";
+ regulator-name = "DDR_1V5b";
+ regulator-boot-on;
+ regulator-always-on;
+
+ };
+
+ sw4_reg: sw4 {
+ regulator-name = "AUX 3V15 (sw4)";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ regulator-always-on;
+ status = "disabled";
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ lm75: sensor@49 {
+ compatible = "national,lm75b";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lm75>;
+ reg = <0x49>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc@51 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ eeprom_ext: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ usb3503: usb@8 {
+ compatible = "smsc,usb3503";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3503>;
+ reg = <0x08>;
+ connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+ intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+ initial-mode = <1>;
+ clocks = <&refclk>;
+ clock-names = "refclk";
+ refclk-frequency = <12000000>;
+ };
+
+ exc3000: touchscreen@2a {
+ compatible = "eeti,exc3000";
+ reg = <0x2a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctouch>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ };
+
+ vcnl4035: light-sensor@60 {
+ compatible = "vishay,vcnl4035";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_proximity>;
+ reg = <0x60>;
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds0: lvds-channel@0 {
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rx-during-tx;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
+ status = "okay";
+};
+
+&usbh2 {
+ pinctrl-names = "idle", "active";
+ pinctrl-0 = <&pinctrl_usbh2_idle>;
+ pinctrl-1 = <&pinctrl_usbh2_active>;
+ vbus-supply = <&reg_usb_h2_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ vbus-supply = <&reg_usb_otg_vbus>;
+ disable-over-current;
+ dr_mode = "otg";
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ status = "okay";
+};
+
+&usbphynop1 {
+ clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+ clock-names = "main_clk";
+ vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+ vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ enable-sdio-wakeup;
+ voltage-ranges = <3300 3300>;
+ vmmc-supply = <&reg_sw4>;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ keep-power-in-suspend;
+ voltage-ranges = <3300 3300>;
+ vmmc-supply = <&reg_sw4>;
+ fsl,wp-controller;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+ timeout-sec=<10>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 /* FEC INT */
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x0001b098
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x0001b098
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x0001b098
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+
+ pinctrl_reset_gpio_led: reset-gpio-led-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcd_enable: lcdenablegrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* lcd enable */
+ MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x1b0b0 /* sel6_8 */
+ >;
+ };
+
+ pinctrl_lm75: lm75grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_proximity: proximitygrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+ >;
+ };
+
+ pinctrl_rtc: rtc-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+ >;
+ };
+
+ pinctrl_ctouch: ctouch-grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbh2_idle: usbh2-idle-grp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018
+ MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+ >;
+ };
+
+ pinctrl_usbh2_active: usbh2-active-grp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TXC__USB_H2_DATA 0x00013018
+ MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+ >;
+ };
+
+ pinctrl_usb3503: usb3503-grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x00000018
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* USB INT */
+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 /* USB Connect */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017069
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00010038
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+ MX6QDL_PAD_GPIO_4__SD2_CD_B 0x0001b0b0
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x00017059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x00010059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+ >;
+ };
+
+ pinctrl_wdog1: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 10922375c51e..ead83091e193 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: m25p80@0 {
+ m25_eeprom: flash@0 {
compatible = "atmel,at25";
spi-max-frequency = <10000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index c713ac03b3b9..9591848cbd37 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@
cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: m25p80@0 {
+ m25_eeprom: flash@0 {
compatible = "atmel,at25256B", "atmel,at25";
spi-max-frequency = <20000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..e894faba571f 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -137,7 +137,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,w25q256", "jedec,spi-nor";
spi-max-frequency = <30000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@
};
&ecspi3 {
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf032b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
index 0a4e251be162..dd91aff3f9e2 100644
--- a/arch/arm/boot/dts/imx6q-vicut1.dts
+++ b/arch/arm/boot/dts/imx6q-vicut1.dts
@@ -6,12 +6,9 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1Q Board";
compatible = "kvg,vicut1q", "fsl,imx6q";
};
-
-&sata {
- status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 0b90c3f59f89..6b64b2fc3995 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
- flash: m25p80@1 {
+ flash: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
deleted file mode 100644
index 7672fbfc29be..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&iomuxc {
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
- MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
- MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
- MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
- MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
- MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
- >;
- };
-};
-
-/* Colibri MMC */
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
- vmmc-supply = <&reg_module_3v3>;
- vqmmc-supply = <&vgen3_reg>;
- wakeup-source;
- keep-power-in-suspend;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 4e2a309c93fa..c383e0e4110c 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+ OR MIT
/*
- * Copyright 2014-2020 Toradex
+ * Copyright 2014-2022 Toradex
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*/
@@ -13,13 +13,79 @@
backlight: backlight {
compatible = "pwm-backlight";
+ brightness-levels = <0 127 191 223 239 247 251 255>;
+ default-brightness-level = <1>;
+ enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
+ power-supply = <&reg_module_3v3>;
pwms = <&pwm3 0 5000000>;
- enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
status = "disabled";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ debounce-interval = <10>;
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ lcd_display: disp0 {
+ compatible = "fsl,imx-parallel-display";
+ interface-pix-fmt = "bgr666";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lcd_display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_display_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
+ };
+
+ /* Will be filled by the bootloader */
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0>;
+ };
+
+ panel_dpi: panel-dpi {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+ status = "disabled";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcd_display_out>;
+ };
+ };
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
@@ -38,36 +104,36 @@
reg_usb_host_vbus: regulator-usb-host-vbus {
compatible = "regulator-fixed";
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb_host_vbus";
status = "disabled";
};
sound {
compatible = "fsl,imx-audio-sgtl5000";
- model = "imx6dl-colibri-sgtl5000";
- ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"Headphone Jack", "HP_OUT",
"LINE_IN", "Line In Jack",
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias";
+ model = "imx6dl-colibri-sgtl5000";
mux-int-port = <1>;
mux-ext-port = <5>;
+ ssi-controller = <&ssi1>;
};
/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
sound_spdif: sound-spdif {
compatible = "fsl,imx-audio-spdif";
- model = "imx-spdif";
spdif-controller = <&spdif>;
spdif-in;
spdif-out;
+ model = "imx-spdif";
status = "disabled";
};
};
@@ -92,6 +158,10 @@
status = "disabled";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
/* Colibri SSP */
&ecspi4 {
cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
@@ -101,10 +171,10 @@
};
&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rmii";
phy-handle = <&ethphy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
status = "okay";
mdio {
@@ -118,6 +188,224 @@
};
};
+&gpio1 {
+ gpio-line-names = "",
+ "SODIMM_67",
+ "SODIMM_180",
+ "SODIMM_196",
+ "SODIMM_174",
+ "SODIMM_176",
+ "SODIMM_194",
+ "SODIMM_55",
+ "SODIMM_63",
+ "SODIMM_28",
+ "SODIMM_93",
+ "SODIMM_69",
+ "SODIMM_99",
+ "SODIMM_130",
+ "SODIMM_106",
+ "SODIMM_98",
+ "SODIMM_192",
+ "SODIMM_49",
+ "SODIMM_190",
+ "SODIMM_51",
+ "SODIMM_47",
+ "SODIMM_53",
+ "",
+ "SODIMM_22";
+};
+
+&gpio2 {
+ gpio-line-names = "SODIMM_132",
+ "SODIMM_134",
+ "SODIMM_135",
+ "SODIMM_133",
+ "SODIMM_102",
+ "SODIMM_43",
+ "SODIMM_127",
+ "SODIMM_37",
+ "SODIMM_104",
+ "SODIMM_59",
+ "SODIMM_30",
+ "SODIMM_100",
+ "SODIMM_38",
+ "SODIMM_34",
+ "SODIMM_32",
+ "SODIMM_36",
+ "SODIMM_59",
+ "SODIMM_67",
+ "SODIMM_97",
+ "SODIMM_79",
+ "SODIMM_103",
+ "SODIMM_101",
+ "SODIMM_45",
+ "SODIMM_105",
+ "SODIMM_107",
+ "SODIMM_91",
+ "SODIMM_89",
+ "SODIMM_150",
+ "SODIMM_126",
+ "SODIMM_128",
+ "",
+ "SODIMM_94";
+};
+
+&gpio3 {
+ gpio-line-names = "SODIMM_111",
+ "SODIMM_113",
+ "SODIMM_115",
+ "SODIMM_117",
+ "SODIMM_119",
+ "SODIMM_121",
+ "SODIMM_123",
+ "SODIMM_125",
+ "SODIMM_110",
+ "SODIMM_112",
+ "SODIMM_114",
+ "SODIMM_116",
+ "SODIMM_118",
+ "SODIMM_120",
+ "SODIMM_122",
+ "SODIMM_124",
+ "",
+ "SODIMM_96",
+ "SODIMM_77",
+ "SODIMM_25",
+ "SODIMM_27",
+ "SODIMM_88",
+ "SODIMM_90",
+ "SODIMM_31",
+ "SODIMM_23",
+ "SODIMM_29",
+ "SODIMM_71",
+ "SODIMM_73",
+ "SODIMM_92",
+ "SODIMM_81",
+ "SODIMM_131",
+ "SODIMM_129";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_168",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_184",
+ "SODIMM_186",
+ "HDMI_15",
+ "HDMI_16",
+ "SODIMM_178",
+ "SODIMM_188",
+ "SODIMM_56",
+ "SODIMM_44",
+ "SODIMM_68",
+ "SODIMM_82",
+ "SODIMM_24",
+ "SODIMM_76",
+ "SODIMM_70",
+ "SODIMM_60",
+ "SODIMM_58",
+ "SODIMM_78",
+ "SODIMM_72",
+ "SODIMM_80",
+ "SODIMM_46",
+ "SODIMM_62",
+ "SODIMM_48",
+ "SODIMM_74";
+};
+
+&gpio5 {
+ gpio-line-names = "SODIMM_95",
+ "",
+ "SODIMM_86",
+ "",
+ "SODIMM_65",
+ "SODIMM_50",
+ "SODIMM_52",
+ "SODIMM_54",
+ "SODIMM_66",
+ "SODIMM_64",
+ "SODIMM_57",
+ "SODIMM_61",
+ "SODIMM_136",
+ "SODIMM_138",
+ "SODIMM_140",
+ "SODIMM_142",
+ "SODIMM_144",
+ "SODIMM_146",
+ "SODIMM_172",
+ "SODIMM_170",
+ "SODIMM_149",
+ "SODIMM_151",
+ "SODIMM_153",
+ "SODIMM_155",
+ "SODIMM_157",
+ "SODIMM_159",
+ "SODIMM_161",
+ "SODIMM_163",
+ "SODIMM_33",
+ "SODIMM_35",
+ "SODIMM_165",
+ "SODIMM_167";
+};
+
+&gpio6 {
+ gpio-line-names = "SODIMM_169",
+ "SODIMM_171",
+ "SODIMM_173",
+ "SODIMM_175",
+ "SODIMM_177",
+ "SODIMM_179",
+ "SODIMM_85",
+ "SODIMM_166",
+ "SODIMM_160",
+ "SODIMM_162",
+ "SODIMM_158",
+ "SODIMM_164",
+ "",
+ "",
+ "SODIMM_156",
+ "SODIMM_75",
+ "SODIMM_154",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_152";
+};
+
+&gpio7 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_19",
+ "SODIMM_21",
+ "",
+ "SODIMM_137";
+};
+
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_ddc>;
@@ -132,65 +420,66 @@
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
- pinctrl-0 = <&pinctrl_i2c2_gpio>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- pmic: pfuze100@8 {
+ pmic: pmic@8 {
compatible = "fsl,pfuze100";
+ fsl,pmic-stby-poweroff;
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1875000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1875000>;
+ regulator-min-microvolt = <300000>;
regulator-ramp-delay = <6250>;
};
sw3a_reg: sw3a {
- regulator-min-microvolt = <400000>;
- regulator-max-microvolt = <1975000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1975000>;
+ regulator-min-microvolt = <400000>;
};
swbst_reg: swbst {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5150000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <5150000>;
+ regulator-min-microvolt = <5000000>;
};
snvs_reg: vsnvs {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1000000>;
};
vref_reg: vrefddr {
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
};
/* vgen1: unused */
vgen2_reg: vgen2 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1550000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1550000>;
+ regulator-min-microvolt = <800000>;
};
/*
@@ -198,57 +487,58 @@
* the i.MX 6 NVCC_SD1.
*/
vgen3_reg: vgen3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
vgen4_reg: vgen4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
};
vgen5_reg: vgen5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
vgen6_reg: vgen6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
};
};
};
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
- reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
+ lrclk-strength = <3>;
+ reg = <0x0a>;
+ #sound-dai-cells = <0>;
VDDA-supply = <&reg_module_3v3_audio>;
VDDIO-supply = <&reg_module_3v3>;
VDDD-supply = <&vgen4_reg>;
- lrclk-strength = <3>;
};
/* STMPE811 touch screen controller */
stmpe811@41 {
compatible = "st,stmpe811";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_touch_int>;
- reg = <0x41>;
+ blocks = <0x5>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio6>;
interrupt-controller;
id = <0>;
- blocks = <0x5>;
irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_touch_int>;
+ reg = <0x41>;
/* 3.25 MHz ADC clock speed */
st,adc-freq = <1>;
/* 12-bit ADC */
@@ -258,7 +548,7 @@
/* ADC converstion time: 80 clocks */
st,sample-time = <4>;
- stmpe_touchscreen {
+ stmpe_ts: stmpe_touchscreen {
compatible = "st,stmpe-ts";
/* 8 sample average control */
st,ave-ctrl = <3>;
@@ -273,9 +563,10 @@
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
+ status = "disabled";
};
- stmpe_adc {
+ stmpe_adc: stmpe_adc {
compatible = "st,stmpe-adc";
/* forbid to use ADC channels 3-0 (touch) */
st,norequest-mask = <0x0F>;
@@ -294,6 +585,21 @@
scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "disabled";
+
+ atmel_mxt_ts: touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ interrupt-parent = <&gpio2>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_atmel_conn>;
+ reg = <0x4a>;
+ reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */
+ status = "disabled";
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&lcd_display_in>;
};
/* Colibri PWM<B> */
@@ -338,27 +644,27 @@
/* Colibri UART_A */
&uart1 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};
/* Colibri UART_B */
&uart2 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_dte>;
- fsl,dte-mode;
uart-has-rtscts;
status = "disabled";
};
/* Colibri UART_C */
&uart3 {
+ fsl,dte-mode;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3_dte>;
- fsl,dte-mode;
status = "disabled";
};
@@ -370,24 +676,28 @@
/* Colibri MMC */
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
- disable-wp;
- vqmmc-supply = <&reg_module_3v3>;
bus-width = <4>;
no-1-8-v;
+ disable-wp;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+ pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+ vmmc-supply = <&reg_module_3v3>;
+ vqmmc-supply = <&vgen3_reg>;
status = "disabled";
};
/* eMMC */
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- vqmmc-supply = <&reg_module_3v3>;
bus-width = <8>;
no-1-8-v;
non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ vqmmc-supply = <&reg_module_3v3>;
status = "okay";
};
@@ -405,14 +715,36 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh_oc_1>;
+ /* Atmel MXT touchsceen + Capacitive Touch Adapter */
+ /* NOTE: This pin group conflicts with pin groups
+ * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+ */
+ pinctrl_atmel_adap: atmeladaptergrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0xb0b1 /* SODIMM 28 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1 /* SODIMM 30 */
+ >;
+ };
+
+ /* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+ /* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+ * pinctrl_weim_cs2. Don't use them simultaneously.
+ */
+ pinctrl_atmel_conn: atmelconnectorgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0xb0b1 /* SODIMM_107 */
+ MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1 /* SODIMM_106 */
+ >;
+ };
+
pinctrl_audmux: audmuxgrp {
fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0
MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
>;
};
@@ -423,28 +755,52 @@
>;
};
+ /* CSI pins used as GPIOs */
+ pinctrl_csi_gpio_1: csigpio1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x1b0b0
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0
+ MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0
+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x1b0b0
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
+ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0
+ MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x1b0b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+ MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_csi_gpio_2: csigpio2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0
+ >;
+ };
+
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
+ /* SPI CS */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1
MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
- /* SPI CS */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0)
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0)
>;
};
@@ -462,13 +818,32 @@
>;
};
- pinctrl_gpio_bl_on: gpioblon {
+ pinctrl_gpio_1: gpio1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ >;
+ };
+ pinctrl_gpio_2: gpio2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio_bl_on: gpioblongrp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0
>;
};
- pinctrl_gpio_keys: gpiokeys {
+ pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
>;
@@ -483,15 +858,15 @@
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
>;
};
- pinctrl_i2c2_gpio: i2c2grp {
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
- MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
>;
};
@@ -523,8 +898,8 @@
MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1
MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1
/* Disable PWM pins on camera interface */
- MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40
>;
};
@@ -555,19 +930,34 @@
>;
};
- pinctrl_mic_gnd: gpiomicgnd {
+ pinctrl_lvds_transceiver: lvdstxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM 95 */
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b030 /* SODIMM 55 */
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x03030 /* SODIMM 63 */
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM 99 */
+ >;
+ };
+
+ pinctrl_mic_gnd: micgndgrp {
fsl,pins = <
/* Controls Mic GND, PU or '1' pull Mic GND to GND */
MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
>;
};
- pinctrl_mmc_cd: gpiommccd {
+ pinctrl_mmc_cd: mmccdgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1
>;
};
+ pinctrl_mmc_cd_sleep: mmccdslpgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x0
+ >;
+ };
+
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
@@ -576,15 +966,15 @@
pinctrl_pwm2: pwm2grp {
fsl,pins = <
- MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040
+ MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
- MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
>;
};
@@ -601,13 +991,6 @@
>;
};
- pinctrl_usbh_oc_1: usbhoc1grp {
- fsl,pins = <
- /* USBH_OC */
- MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
- >;
- };
-
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
@@ -650,9 +1033,9 @@
pinctrl_uart2_dte: uart2dtegrp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1
>;
};
@@ -667,20 +1050,27 @@
fsl,pins = <
/* USBC_DET */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
- /* USBC_DET_EN */
- MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058
/* USBC_DET_OVERWRITE */
MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058
+ /* USBC_DET_EN */
+ MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058
>;
};
- pinctrl_usbc_id_1: usbc_id-1 {
+ pinctrl_usbc_id_1: usbcid1grp {
fsl,pins = <
/* USBC_ID */
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
>;
};
+ pinctrl_usbh_oc_1: usbhoc1grp {
+ fsl,pins = <
+ /* USBH_OC */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b0
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071
@@ -692,6 +1082,40 @@
>;
};
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170b1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100b1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f1
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f1
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+ >;
+ };
+
+ /* avoid backfeeding with removed card power */
+ pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x3000
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x3000
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x3000
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x3000
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x3000
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x3000
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -730,135 +1154,136 @@
>;
};
- pinctrl_weim_sram: weimsramgrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
- MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
- /* Data */
- MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
- MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
- MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
- MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
- MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
- MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
- MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
- MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
- MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
- MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
- MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
- MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
- MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
- MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
- MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
- MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
- /* Address */
- MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
- MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
- MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
- MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
- MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
- MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
- MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
- MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
- MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
- MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
- MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
- MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
- MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
- MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
- MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
- MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
- >;
- };
-
- pinctrl_weim_rdnwr: weimrdnwr {
- fsl,pins = <
- MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040
- MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0
- >;
- };
-
- pinctrl_weim_npwe: weimnpwe {
- fsl,pins = <
- MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040
- MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0
- >;
- };
-
/* ADDRESS[16:18] [25] used as GPIO */
- pinctrl_weim_gpio_1: weimgpio-1 {
+ pinctrl_weim_gpio_1: weimgpio1grp {
fsl,pins = <
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0
MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0
MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0
MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
>;
};
/* ADDRESS[19:24] used as GPIO */
- pinctrl_weim_gpio_2: weimgpio-2 {
+ pinctrl_weim_gpio_2: weimgpio2grp {
fsl,pins = <
- MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
- MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
- MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0
- MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0
- MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0
- MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
- MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0
MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+ MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
>;
};
/* DATA[16:31] used as GPIO */
- pinctrl_weim_gpio_3: weimgpio-3 {
+ pinctrl_weim_gpio_3: weimgpio3grp {
fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0
MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
- MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
- MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
- MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
- MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0
MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
- MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
- MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
- MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
- MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0
- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0
+ MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0
>;
};
/* DQM[0:3] used as GPIO */
- pinctrl_weim_gpio_4: weimgpio-4 {
+ pinctrl_weim_gpio_4: weimgpio4grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
- MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+ MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
>;
};
/* RDY used as GPIO */
- pinctrl_weim_gpio_5: weimgpio-5 {
+ pinctrl_weim_gpio_5: weimgpio5grp {
fsl,pins = <
MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0
>;
};
/* ADDRESS[16] DATA[30] used as GPIO */
- pinctrl_weim_gpio_6: weimgpio-6 {
+ pinctrl_weim_gpio_6: weimgpio6grp {
fsl,pins = <
- MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_weim_npwe: weimnpwegrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040
+ >;
+ };
+
+ pinctrl_weim_sram: weimsramgrp {
+ fsl,pins = <
+ /* Data */
+ MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+ MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+ /* Address */
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+ /* Ctrl */
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+ >;
+ };
+
+ pinctrl_weim_rdnwr: weimrdnwrgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0
+ MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040
>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index b167b33bd108..095c9143d99a 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -258,7 +258,7 @@
status = "okay";
/* default boot source: workaround #1 for errata ERR006282 */
- smarc_flash: spi-flash@0 {
+ smarc_flash: flash@0 {
compatible = "winbond,w25q16dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index ac34709e9741..0ad4cb4f1e82 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -179,7 +179,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index c96f4d7e1e0d..beaa2dcd436c 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -321,7 +321,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..ee7e2371f94b 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 49da30d7510c..904d5d051d63 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1f2ba6f6254e..768bc0e3a2b3 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -47,12 +47,12 @@
pinctrl-0 = <&pinctrl_leds>;
compatible = "gpio-leds";
- green {
+ led_green: green {
label = "phyflex:green";
gpios = <&gpio1 30 0>;
};
- red {
+ led_red: red {
label = "phyflex:red";
gpios = <&gpio2 31 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 5e58740d40c5..1368a4762037 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -272,7 +272,7 @@
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
status = "disabled"; /* pin conflict with WEIM NOR */
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index eb9a0b104f1c..901b9a761b66 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -313,7 +313,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0c0105468a2f..37482a9023fc 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -197,7 +197,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index bcc5bbcce769..f41f86a76ea9 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -264,11 +264,6 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet &pinctrl_enet_mdio &pinctrl_etnphy_rst>;
- clocks = <&clks IMX6QDL_CLK_ENET>,
- <&clks IMX6QDL_CLK_ENET>,
- <&clks IMX6QDL_CLK_ENET_REF>,
- <&clks IMX6QDL_CLK_ENET_REF>;
- clock-names = "ipg", "ahb", "ptp", "enet_out";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
phy-reset-post-delay = <10>;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index ccfa8e320be6..93a8123da27d 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -295,7 +295,7 @@
pinctrl-0 = <&pinctrl_usbh>;
vbus-supply = <&reg_usb_h1_vbus>;
clocks = <&clks IMX6QDL_CLK_CKO>;
- status = "okay";
+ status = "disabled";
};
&usbotg {
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
new file mode 100644
index 000000000000..f505f2704530
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-vicut1-12inch.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Protonic Holland
+ */
+
+/ {
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+ autorepeat;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ panel {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight_lcd>;
+ power-supply = <&reg_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ9031RNX PHY */
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+ "CAM2_MIRROR", "", "", "SMBALERT",
+ "DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+ "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+ "SD1_DATA3", "ETH_MDIO", "",
+ "", "ETH_RESET", "", "", "ETH_INT", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+ "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+ "CAN2_SR", "CAN2_TX", "CAN2_RX",
+ "", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+ "HITCH_IN_OUT",
+ "LIGHT_ON", "", "", "CONTACT_IN", "BL_EN", "BL_PWM", "",
+ "ISB_LED";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+ "I2S_BITCLK", "I2S_DOUT",
+ "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+ "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+ "ITU656_D6", "ITU656_D7", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
+ "RGMII_TD3",
+ "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
+ "RGMII_RD2", "RGMII_RD3", "", "";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+
+ pinctrl_gpiokeys: gpiokeygrp {
+ fsl,pins = <
+ /* nON_SWITCH */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index 1ac7e13249d2..a1676b5d2980 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -16,18 +16,27 @@
stdout-path = &uart4;
};
- backlight: backlight {
+ backlight_lcd: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 16 64 255>;
num-interpolated-steps = <16>;
- default-brightness-level = <1>;
+ default-brightness-level = <48>;
power-supply = <&reg_3v3>;
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
};
+ backlight_led: backlight_led {
+ compatible = "pwm-backlight";
+ pwms = <&pwm3 0 5000000 0>;
+ brightness-levels = <0 16 64 255>;
+ num-interpolated-steps = <16>;
+ default-brightness-level = <48>;
+ power-supply = <&reg_3v3>;
+ };
+
connector {
compatible = "composite-video-connector";
label = "Composite0";
@@ -61,54 +70,37 @@
gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
};
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- power {
- label = "Power Button";
- gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led-0 {
- label = "LED_DI0_DEBUG_0";
+ label = "debug0";
function = LED_FUNCTION_HEARTBEAT;
- gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
led-1 {
- label = "LED_DI0_DEBUG_1";
+ label = "debug1";
function = LED_FUNCTION_DISK;
- gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "disk-activity";
};
led-2 {
- label = "POWER_LED";
+ label = "power_led";
function = LED_FUNCTION_POWER;
gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- };
-
- panel {
- compatible = "kyo,tcg121xglp";
- backlight = <&backlight>;
- power-supply = <&reg_3v3>;
- port {
- panel_in: endpoint {
- remote-endpoint = <&lvds0_out>;
- };
+ led-3 {
+ label = "isb_led";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
};
@@ -135,18 +127,6 @@
enable-active-high;
};
- reg_wifi: regulator-wifi {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wifi_npd>;
- regulator-name = "wifi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- startup-delay-us = <70000>;
- };
-
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "prti6q-sgtl5000";
@@ -173,6 +153,14 @@
frame-master;
};
};
+
+ thermal-zones {
+ chassis-thermal {
+ polling-delay = <20000>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&tsens0>;
+ };
+ };
};
&audmux {
@@ -232,47 +220,13 @@
};
};
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii-id";
- phy-handle = <&rgmii_phy>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Microchip KSZ9031RNX PHY */
- rgmii_phy: ethernet-phy@0 {
- reg = <0>;
- interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <300>;
- };
- };
-};
-
-&gpio1 {
- gpio-line-names =
- "CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
- "CAM2_MIRROR", "", "", "SMBALERT",
- "DEBUG_0", "DEBUG_1", "SDIO_SCK", "SDIO_CMD", "SDIO_D3",
- "SDIO_D2", "SDIO_D1", "SDIO_D0",
- "SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
- "SD1_DATA3", "", "",
- "", "ETH_RESET", "WIFI_PD", "WIFI_BT_RST", "ETH_INT", "",
- "WL_IRQ", "ETH_MDC";
-};
-
&gpio2 {
gpio-line-names =
- "count0", "count1", "count2", "", "", "", "", "",
- "REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
- "BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
- "", "", "", "", "", "", "", "ON_SWITCH",
- "POWER_LED", "", "ECSPI2_SS0", "", "", "", "", "";
+ "YACO_WHEEL", "YACO_RADAR", "YACO_PTO", "", "", "", "", "",
+ "", "LED_PWM", "", "", "",
+ "", "", "",
+ "", "", "", "", "", "ISB_IN2", "ISB_nIN1", "ON_SWITCH",
+ "POWER_LED", "", "", "", "", "", "", "";
};
&gpio3 {
@@ -281,37 +235,8 @@
"", "", "", "", "", "", "", "",
"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
"CPU_ON1_FB", "USB_OTG_OC", "USB_OTG_PWR", "YACO_IRQ",
- "", "", "", "", "", "", "", "";
-};
-
-&gpio4 {
- gpio-line-names =
- "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
- "UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
- "CAN2_SR", "CAN2_TX", "CAN2_RX",
- "LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "", "", "", "", "", "",
- "", "", "", "", "BL_EN", "BL_PWM", "", "";
-};
-
-&gpio5 {
- gpio-line-names =
- "", "", "", "", "", "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_W_DIS",
- "PCIE_RESET", "", "", "", "", "", "", "",
- "", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
- "I2S_BITCLK", "I2S_DOUT",
- "I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
- "YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
-};
-
-&gpio6 {
- gpio-line-names =
- "ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
- "ITU656_D6", "ITU656_D7", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "RGMII_TXC", "RGMII_TD0", "RGMII_TD1", "RGMII_TD2",
- "RGMII_TD3",
- "RGMII_RX_CTL", "RGMII_RD0", "RGMII_TX_CTL", "RGMII_RD1",
- "RGMII_RD2", "RGMII_RD3", "", "";
+ "TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+ "YACO_RESET";
};
&gpio7 {
@@ -406,9 +331,10 @@
reg = <0x51>;
};
- temperature-sensor@70 {
+ tsens0: temperature-sensor@70 {
compatible = "ti,tmp103";
reg = <0x70>;
+ #thermal-sensor-cells = <0>;
};
};
@@ -438,13 +364,15 @@
};
};
-&pcie {
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
status = "okay";
};
-&pwm1 {
+&pwm3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
+ pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
@@ -460,12 +388,6 @@
status = "okay";
};
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
@@ -513,26 +435,6 @@
status = "okay";
};
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- vmmc-supply = <&reg_wifi>;
- non-removable;
- cap-power-off-card;
- keep-power-in-suspend;
- no-1-8-v;
- no-mmc;
- no-sd;
- status = "okay";
-
- wifi {
- compatible = "ti,wl1271";
- interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
- ref-clock-frequency = "38400000";
- tcxo-clock-frequency = "19200000";
- };
-};
-
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
@@ -613,29 +515,6 @@
>;
};
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
- /* Phy reset */
- MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
- >;
- };
-
pinctrl_hog: hoggrp {
fsl,pins = <
/* ITU656_nRESET */
@@ -646,8 +525,6 @@
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
/* CAM_nDETECT */
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
- /* nON_SWITCH */
- MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
/* ISB_IN1 */
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
/* ISB_nIN2 */
@@ -669,27 +546,11 @@
/* ITU656_nPDN */
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
- /* HW revision detect */
- /* REV_ID0 */
- MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
- /* REV_ID1 */
- MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
- /* REV_ID2 */
- MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
- /* REV_ID3 */
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
- /* REV_ID4 */
- MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-
/* New in HW revision 1 */
/* ON1_FB */
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
/* DIP1_FB */
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
-
- /* New in UT2: FIXME: ISB PWM should start off, PD */
- /* ISB_LED_PWM */
- MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x130b0
>;
};
@@ -729,6 +590,8 @@
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
/* POWER_LED */
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ /* ISB_LED */
+ MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0
>;
};
@@ -738,20 +601,17 @@
>;
};
- /* YaCO AUX Uart */
- pinctrl_uart1: uart1grp {
+ pinctrl_pwm3: pwm3grp {
fsl,pins = <
- MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
- MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0
>;
};
- pinctrl_uart2: uart2grp {
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
fsl,pins = <
- MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
- MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
- MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
>;
};
@@ -797,19 +657,6 @@
>;
};
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
- /* WL12xx IRQ */
- MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
- >;
- };
-
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
@@ -825,10 +672,4 @@
MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
>;
};
-
- pinctrl_wifi_npd: wifinpdgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
- >;
- };
};
diff --git a/arch/arm/boot/dts/imx6qp-vicutp.dts b/arch/arm/boot/dts/imx6qp-vicutp.dts
index 7bad7ca6b12e..49ff145fffe5 100644
--- a/arch/arm/boot/dts/imx6qp-vicutp.dts
+++ b/arch/arm/boot/dts/imx6qp-vicutp.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx6qp.dtsi"
#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
/ {
model = "Kverneland UT1P Board";
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..f16c830f1e91 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -137,7 +137,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index c7d907c5c352..06a515121dfc 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -50,7 +50,7 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0x0>;
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: s25fl128s@0 {
+ flash0: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
@@ -133,7 +133,7 @@
spi-tx-bus-width = <4>;
};
- flash1: s25fl128s@2 {
+ flash1: flash@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 99f4cf777a38..969cfe920d25 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,7 +108,7 @@
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@
reg = <0>;
};
- flash1: n25q256a@2 {
+ flash1: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index a3fde3316c73..1a18c41ce385 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -286,7 +286,7 @@
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
index 47d3ce5d255f..acd936540d89 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -19,7 +19,7 @@
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
index a095a7654ac6..29ed38dce580 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -18,7 +18,7 @@
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 770f59b23102..a6cf0f21c66d 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -178,7 +178,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index 2a449a3c1ae2..09a83dbdf651 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -19,7 +19,7 @@
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
index 205e4d462702..ec042648bd98 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -11,7 +11,7 @@
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <5>;
power-supply = <&reg_backlight_en>;
- pwms = <&pwm3 0 5000000>;
+ pwms = <&pwm3 0 5000000 0>;
status = "disabled";
};
@@ -91,7 +91,6 @@
};
&pwm3 {
- #pwm-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "disabled";
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
new file mode 100644
index 000000000000..eca94ed6451b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULxL
+ * - TQMa6ULLx
+ * - TQMa6ULLxL
+ */
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_recovery>;
+ scl-gpios = <&gpio1 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pfuze3000: pmic@8 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ reg_sw1a: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <6250>;
+ /* not used */
+ };
+
+ reg_sw1b_core: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ reg_sw2: sw2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_sw3_ddr: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_swbst: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ /* not used */
+ };
+
+ reg_snvs_3v0: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vccsd: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_v33_3v3: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vldo1_3v3: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ /* not used */
+ };
+
+ reg_vldo2: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ /* not used */
+ };
+
+ reg_vldo3: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ /* not used */
+ };
+
+ reg_vldo4: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ jc42_1a: eeprom-temperature-sensor@1a {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1a>;
+ };
+
+ m24c64_50: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ m24c02_52: eeprom@52 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ read-only;
+ };
+
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+
+ /*
+ * PMIC & temperature sensor IRQ
+ * Both do currently not use IRQ
+ * potentially dangerous if used on baseboard
+ */
+ pmic-int-hog {
+ gpio-hog;
+ gpios = <24 0>;
+ input;
+ };
+};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ flash0: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <33000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ reg = <0>;
+ };
+};
+
+/* eMMC */
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz" , "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+
+ bus-width = <8>;
+ disable-wp;
+ non-removable;
+ no-sdio;
+ no-sd;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__I2C4_SCL 0x4001b8b0
+ MX6UL_PAD_UART2_RX_DATA__I2C4_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c4_recovery: i2c4recoverygrp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x4001b8b0
+ MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x4001b8b0
+ >;
+ };
+
+ pinctrl_pmic: pmic {
+ fsl,pins = <
+ /* PMIC irq */
+ MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x1b099
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
new file mode 100644
index 000000000000..f2a5f17f312e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1-mba6ulx.dts
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul1.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6UL1 SoM on MBa6ULx board";
+ compatible = "tq,imx6ul-tqma6ul1-mba6ulx", "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)
+ * and need to be disabled here again
+ */
+&can2 {
+ status = "disabled";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>, <&pinctrl_enet1_mdc>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ max-speed = <100>;
+ reg = <0>;
+ };
+ };
+};
+
+&fec2 {
+ /delete-property/ phy-handle;
+ /delete-node/ mdio;
+};
+
+&iomuxc {
+ pinctrl_enet1_mdc: enet1mdcgrp {
+ fsl,pins = <
+ /* mdio */
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
new file mode 100644
index 000000000000..24192d012ef7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul1.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul-tqma6ul2.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6UL1 SoM";
+ compatible = "tq,imx6ul-tqma6ul1", "fsl,imx6ul";
+};
+
+/*
+ * There are no module specific differences compared to TQMa6UL2,
+ * only external interfaces differ
+ */
+
+/*
+ * Devices not available on i.MX6ULG1 and should not be enabled on
+ * mainboard level (again)
+ */
+&can2 {
+ status = "disabled";
+};
+
+&csi {
+ status = "disabled";
+};
+
+&fec2 {
+ status = "disabled";
+};
+
+&lcdif {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
new file mode 100644
index 000000000000..0757df2b8f48
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6ULx SoM on MBa6ULx board";
+ compatible = "tq,imx6ul-tqma6ul2-mba6ulx", "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
new file mode 100644
index 000000000000..e2e95dd92263
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6UL2 SoM";
+ compatible = "tq,imx6ul-tqma6ul2", "fsl,imx6ul";
+};
+
+&usdhc2 {
+ fsl,tuning-step = <6>;
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170e1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170e1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170e1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170e1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170e1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170e1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170e1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170e1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170e1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
new file mode 100644
index 000000000000..9d9b6b744a1c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-tqma6ul2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+ model = "TQ Systems TQMa6UL2L SoM on MBa6ULx board";
+ compatible = "tq,imx6ul-tqma6ul2l-mba6ulx", "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
new file mode 100644
index 000000000000..caf2c5d03f7e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul2l.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ul.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6UL2L SoM";
+ compatible = "tq,imx6ul-tqma6ul2l", "fsl,imx6ul";
+};
+
+&usdhc2 {
+ fsl,tuning-step= <6>;
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017051
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017051
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017051
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017051
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017051
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017051
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017051
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017051
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017051
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017051
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170e1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f9
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
new file mode 100644
index 000000000000..5afb9046c202
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulx-common.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULx
+ * - TQMa6ULLx
+ */
+
+&m24c64_50 {
+ vcc-supply = <&reg_sw2>;
+};
+
+&m24c02_52 {
+ vcc-supply = <&reg_sw2>;
+};
+
+&reg_sw2 {
+ regulator-boot-on;
+ regulator-always-on;
+};
+
+/* eMMC */
+&usdhc2 {
+ vmmc-supply = <&reg_sw2>;
+ vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70b9
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70b9
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70b9
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70b9
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70b9
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
new file mode 100644
index 000000000000..ba84a4f70ebd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-tqma6ulxl-common.dtsi
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/*
+ * Common for
+ * - TQMa6ULxL
+ * - TQMa6ULLxL
+ */
+
+/ {
+ reg_vin: reg-vin {
+ compatible = "regulator-fixed";
+ regulator-name = "VIN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+&m24c64_50 {
+ vcc-supply = <&reg_vin>;
+};
+
+&m24c02_52 {
+ vcc-supply = <&reg_vin>;
+};
+
+/* eMMC */
+&usdhc2 {
+ vmmc-supply = <&reg_vin>;
+ vqmmc-supply = <&reg_vldo4>;
+};
+
+&iomuxc {
+ pinctrl_qspi: qspigrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK 0x70a9
+ MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a9
+ MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01 0x70a9
+ MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02 0x70a9
+ MX6UL_PAD_NAND_CLE__QSPI_A_DATA03 0x70a9
+ MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B 0x70a1
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
new file mode 100644
index 000000000000..d3f2fb7c6c1e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Aster";
+ compatible = "toradex,colibri-imx6ull-aster",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
new file mode 100644
index 000000000000..c9133ba2d705
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+ power {
+ label = "Wake-Up";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&ecspi1 {
+ status = "okay";
+
+ num-cs = <2>;
+ cs-gpios = <
+ &gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
+ &gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
+ >;
+};
+
+/*
+ * Following SODIMM Pins should not be accessed as GPIO on Aster board:
+ * 134 - AIN5_SCL (no connection)
+ * 127 - Voltage Level Translator OE# signal (IC11 and IC12)
+ *
+ * To configure GPIO to LED5, please disable FEC2 and uncomment the following:
+ * &iomuxc {
+ * pinctrl-names = "default";
+ * pinctrl-0 = <
+ * &pinctrl_gpio1
+ * &pinctrl_gpio2
+ * &pinctrl_gpio3
+ * &pinctrl_gpio4
+ * &pinctrl_gpio6 - for non-WiFi modules only
+ * &pinctrl_gpio7
+ * &pinctrl_gpio_aster
+ * >;
+ *
+ * pinctrl_gpio_aster: gpio-aster {
+ * fsl,pins = <
+ * MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0
+ * >;
+ * };
+ * };
+ */
+
+&i2c1 {
+ status = "okay";
+
+ m41t0m6: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+/* PWM <A> */
+&pwm4 {
+ status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+ status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+ status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usbh_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usbh_vbus>;
+ status = "okay";
+};
+
+&usdhc1 {
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
new file mode 100644
index 000000000000..919c0464d6cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-aster.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Aster";
+ compatible = "toradex,colibri-imx6ull-emmc-aster",
+ "toradex,colibri-imx6ull-emmc",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
new file mode 100644
index 000000000000..b9060c2f7977
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris-v2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 1G (eMMC) on Colibri Iris V2";
+ compatible = "toradex,colibri-imx6ull-iris-v2",
+ "toradex,colibri-imx6ull-emmc",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
new file mode 100644
index 000000000000..0ab71f2f5daa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-iris.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Iris";
+ compatible = "toradex,colibri-imx6ull-emmc-iris",
+ "toradex,colibri-imx6ull-emmc",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
index a099abfdfa27..ea238525d5c0 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2021 Toradex
+ * Copyright 2022 Toradex
*/
#include "imx6ull-colibri.dtsi"
@@ -8,7 +8,7 @@
/ {
aliases {
mmc0 = &usdhc2; /* eMMC */
- mmc1 = &usdhc1; /* MMC 4bit slot */
+ mmc1 = &usdhc1; /* MMC 4-bit slot */
};
memory@80000000 {
@@ -154,6 +154,7 @@
"SODIMM_127";
};
+/* NAND */
&gpmi {
status = "disabled";
};
@@ -170,6 +171,7 @@
pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
};
+/* eMMC */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2emmc>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
index 08669a18349e..9bf7111d7b00 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
*/
/dts-v1/;
@@ -9,6 +9,6 @@
#include "imx6ull-colibri-eval-v3.dtsi"
/ {
- model = "Toradex Colibri iMX6ULL 256MB on Colibri Evaluation Board V3";
+ model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Evaluation Board V3";
compatible = "toradex,colibri-imx6ull-eval", "fsl,imx6ull";
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index a78849fd2afa..e29907428c20 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2017 Toradex AG
+ * Copyright 2017-2022 Toradex
*/
/ {
@@ -8,20 +8,6 @@
stdout-path = "serial0:115200n8";
};
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
-
- power {
- label = "Wake-Up";
- gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
-
/* fixed crystal dedicated to mcp2515 */
clk16m: clk16m {
compatible = "fixed-clock";
@@ -29,18 +15,6 @@
clock-frequency = <16000000>;
};
- panel: panel {
- compatible = "edt,et057090dhu";
- backlight = <&bl>;
- power-supply = <&reg_3v3>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&lcdif_out>;
- };
- };
- };
-
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V";
@@ -71,14 +45,6 @@
status = "okay";
};
-&bl {
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- power-supply = <&reg_3v3>;
- pwms = <&pwm4 0 5000000 1>;
- status = "okay";
-};
-
&ecspi1 {
status = "okay";
@@ -107,16 +73,6 @@
};
};
-&lcdif {
- status = "okay";
-
- port {
- lcdif_out: endpoint {
- remote-endpoint = <&panel_in>;
- };
- };
-};
-
/* PWM <A> */
&pwm4 {
status = "okay";
@@ -150,6 +106,7 @@
};
&usbotg1 {
+ vbus-supply = <&reg_usbh_vbus>;
status = "okay";
};
@@ -159,20 +116,6 @@
};
&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
- pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
- cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
- disable-wp;
- wakeup-source;
- keep-power-in-suspend;
vmmc-supply = <&reg_3v3>;
- vqmmc-supply = <&reg_sd1_vmmc>;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
new file mode 100644
index 000000000000..afc1e0119783
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 256M/512B on Colibri Iris V2";
+ compatible = "toradex,colibri-imx6ull-iris-v2",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&gpio1 {
+ /* This turns the LVDS transceiver on */
+ lvds-power-on {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+ line-name = "LVDS_POWER_ON";
+ output-high;
+ };
+};
+
+&gpio2 {
+ /*
+ * This switches the LVDS transceiver to the single-channel
+ * output mode.
+ */
+ lvds-ch-mode {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+ line-name = "LVDS_CH_MODE";
+ output-high;
+ };
+
+ /*
+ * This switches the LVDS transceiver to the 24-bit RGB mode.
+ */
+ lvds-rgb-mode {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+ line-name = "LVDS_RGB_MODE";
+ output-low;
+ };
+};
+
+&gpio5 {
+ /*
+ * This switches the LVDS transceiver to VESA color mapping mode.
+ */
+ lvds-color-map {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+ line-name = "LVDS_COLOR_MAP";
+ output-low;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
new file mode 100644
index 000000000000..93649cad0cc0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dtsi
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+ reg_3v3_vmmc: regulator-3v3-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ };
+};
+
+
+&usdhc1 {
+ cap-power-off-card;
+ vmmc-supply = <&reg_3v3_vmmc>;
+ /delete-property/ keep-power-in-suspend;
+ /delete-property/ no-1-8-v;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
new file mode 100644
index 000000000000..4fb97b0fe30b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-nonwifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 256/512MB on Colibri Iris";
+ compatible = "toradex,colibri-imx6ull-iris",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
new file mode 100644
index 000000000000..7f3b37baba88
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+ power {
+ label = "Wake-Up";
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ vin-supply = <&reg_5v0>;
+ };
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&gpio1 {
+ /*
+ * uart25_tx_on turns the UART transceiver on. If one wants to turn the
+ * transceiver off, that property has to be deleted and the gpio handled
+ * in userspace.
+ * The same applies to uart1_tx_on.
+ */
+ uart25_tx_on {
+ gpio-hog;
+ gpios = <15 0>;
+ output-high;
+ };
+};
+
+&gpio2 {
+ uart1_tx_on {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ m41t0m6: rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+};
+
+/* PWM <A> */
+&pwm4 {
+ status = "okay";
+};
+
+/* PWM <B> */
+&pwm5 {
+ status = "okay";
+};
+
+/* PWM <C> */
+&pwm6 {
+ status = "okay";
+};
+
+/* PWM <D> */
+&pwm7 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usbh_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usbh_vbus>;
+ status = "okay";
+};
+
+&usdhc1 {
+ vmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
index 95a11b8bcbdb..88901db255d6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-nonwifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
*/
#include "imx6ull-colibri.dtsi"
@@ -12,13 +12,150 @@
};
};
+&gpio1 {
+ gpio-line-names = "SODIMM_8",
+ "SODIMM_6",
+ "SODIMM_129",
+ "SODIMM_89",
+ "SODIMM_19",
+ "SODIMM_21",
+ "UNUSABLE_SODIMM_180",
+ "UNUSABLE_SODIMM_184",
+ "SODIMM_4",
+ "SODIMM_2",
+ "SODIMM_106",
+ "SODIMM_71",
+ "SODIMM_23",
+ "SODIMM_31",
+ "SODIMM_99",
+ "SODIMM_102",
+ "SODIMM_33",
+ "SODIMM_35",
+ "SODIMM_25",
+ "SODIMM_27",
+ "SODIMM_36",
+ "SODIMM_38",
+ "SODIMM_32",
+ "SODIMM_34",
+ "SODIMM_135",
+ "SODIMM_77",
+ "SODIMM_100",
+ "SODIMM_186",
+ "SODIMM_196",
+ "SODIMM_194";
+};
+
+&gpio2 {
+ gpio-line-names = "SODIMM_55",
+ "SODIMM_63",
+ "SODIMM_178",
+ "SODIMM_188",
+ "SODIMM_73",
+ "SODIMM_30",
+ "SODIMM_67",
+ "SODIMM_104",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_190",
+ "SODIMM_47",
+ "SODIMM_192",
+ "SODIMM_49",
+ "SODIMM_51",
+ "SODIMM_53";
+};
+
+&gpio3 {
+ gpio-line-names = "SODIMM_56",
+ "SODIMM_44",
+ "SODIMM_68",
+ "SODIMM_82",
+ "",
+ "SODIMM_76",
+ "SODIMM_70",
+ "SODIMM_60",
+ "SODIMM_58",
+ "SODIMM_78",
+ "SODIMM_72",
+ "SODIMM_80",
+ "SODIMM_46",
+ "SODIMM_62",
+ "SODIMM_48",
+ "SODIMM_74",
+ "SODIMM_50",
+ "SODIMM_52",
+ "SODIMM_54",
+ "SODIMM_66",
+ "SODIMM_64",
+ "SODIMM_57",
+ "SODIMM_61",
+ "SODIMM_29",
+ "SODIMM_37",
+ "SODIMM_88",
+ "SODIMM_86",
+ "SODIMM_92",
+ "SODIMM_90";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_59",
+ "",
+ "",
+ "SODIMM_133",
+ "",
+ "SODIMM_28",
+ "SODIMM_75",
+ "SODIMM_96",
+ "SODIMM_81",
+ "SODIMM_94",
+ "SODIMM_101",
+ "SODIMM_103",
+ "SODIMM_79",
+ "SODIMM_97",
+ "SODIMM_69",
+ "SODIMM_98",
+ "SODIMM_85",
+ "SODIMM_65";
+};
+
+&gpio5 {
+ gpio-line-names = "SODIMM_43",
+ "SODIMM_45",
+ "SODIMM_137",
+ "SODIMM_95",
+ "SODIMM_107",
+ "SODIMM_131",
+ "SODIMM_93",
+ "",
+ "SODIMM_138",
+ "",
+ "SODIMM_105",
+ "SODIMM_127";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
- &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio6 &pinctrl_gpio7>;
+ &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7>;
};
&iomuxc_snvs {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2 &pinctrl_snvs_gpio3>;
+ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
new file mode 100644
index 000000000000..b4f65e8c5857
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-aster.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-aster.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 512MB on Colibri Aster";
+ compatible = "toradex,colibri-imx6ull-wifi-aster",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
index df72ce1ae2cb..1d64d1a5d8a7 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-eval-v3.dts
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
new file mode 100644
index 000000000000..ce02f8a9ddd3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris-v2.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris V2";
+ compatible = "toradex,colibri-imx6ull-wifi-iris-v2",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
+
+&gpio1 {
+ /* This turns the LVDS transceiver on */
+ lvds-power-on {
+ gpio-hog;
+ gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
+ line-name = "LVDS_POWER_ON";
+ output-high;
+ };
+};
+
+&gpio2 {
+ /*
+ * This switches the LVDS transceiver to the single-channel
+ * output mode.
+ */
+ lvds-ch-mode {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
+ line-name = "LVDS_CH_MODE";
+ output-high;
+ };
+
+ /*
+ * This switches the LVDS transceiver to the 24-bit RGB mode.
+ */
+ lvds-rgb-mode {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
+ line-name = "LVDS_RGB_MODE";
+ output-low;
+ };
+};
+
+&gpio5 {
+ /*
+ * This switches the LVDS transceiver to VESA color mapping mode.
+ */
+ lvds-color-map {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
+ line-name = "LVDS_COLOR_MAP";
+ output-low;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
new file mode 100644
index 000000000000..5ac1aa298ce7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018-2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6ull-colibri-wifi.dtsi"
+#include "imx6ull-colibri-iris.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX6ULL 512MB on Colibri Iris";
+ compatible = "toradex,colibri-imx6ull-wifi-iris",
+ "toradex,colibri-imx6ull",
+ "fsl,imx6ull";
+};
+
+&atmel_mxt_ts {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
index 9f1e38282bee..db59ee6b1c86 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi
@@ -1,6 +1,6 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2018 Toradex AG
+ * Copyright 2018-2022 Toradex
*/
#include "imx6ull-colibri.dtsi"
@@ -23,16 +23,152 @@
clock-frequency = <792000000>;
};
+&gpio1 {
+ gpio-line-names = "SODIMM_8",
+ "SODIMM_6",
+ "SODIMM_129",
+ "",
+ "SODIMM_19",
+ "SODIMM_21",
+ "UNUSABLE_SODIMM_180",
+ "UNUSABLE_SODIMM_184",
+ "SODIMM_4",
+ "SODIMM_2",
+ "SODIMM_106",
+ "SODIMM_71",
+ "SODIMM_23",
+ "SODIMM_31",
+ "SODIMM_99",
+ "SODIMM_102",
+ "SODIMM_33",
+ "SODIMM_35",
+ "SODIMM_25",
+ "SODIMM_27",
+ "SODIMM_36",
+ "SODIMM_38",
+ "SODIMM_32",
+ "SODIMM_34",
+ "SODIMM_135",
+ "SODIMM_77",
+ "SODIMM_100",
+ "SODIMM_186",
+ "SODIMM_196",
+ "SODIMM_194";
+};
+
+&gpio2 {
+ gpio-line-names = "SODIMM_55",
+ "SODIMM_63",
+ "SODIMM_178",
+ "SODIMM_188",
+ "SODIMM_73",
+ "SODIMM_30",
+ "SODIMM_67",
+ "SODIMM_104",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_190",
+ "SODIMM_47",
+ "SODIMM_192",
+ "SODIMM_49",
+ "SODIMM_51",
+ "SODIMM_53";
+};
+
+&gpio3 {
+ gpio-line-names = "SODIMM_56",
+ "SODIMM_44",
+ "SODIMM_68",
+ "SODIMM_82",
+ "",
+ "SODIMM_76",
+ "SODIMM_70",
+ "SODIMM_60",
+ "SODIMM_58",
+ "SODIMM_78",
+ "SODIMM_72",
+ "SODIMM_80",
+ "SODIMM_46",
+ "SODIMM_62",
+ "SODIMM_48",
+ "SODIMM_74",
+ "SODIMM_50",
+ "SODIMM_52",
+ "SODIMM_54",
+ "SODIMM_66",
+ "SODIMM_64",
+ "SODIMM_57",
+ "SODIMM_61",
+ "SODIMM_29",
+ "SODIMM_37",
+ "SODIMM_88",
+ "SODIMM_86",
+ "SODIMM_92",
+ "SODIMM_90";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_59",
+ "",
+ "",
+ "SODIMM_133",
+ "",
+ "SODIMM_28",
+ "SODIMM_75",
+ "SODIMM_96",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_69",
+ "SODIMM_98",
+ "SODIMM_85",
+ "SODIMM_65";
+};
+
+&gpio5 {
+ gpio-line-names = "SODIMM_43",
+ "SODIMM_45",
+ "SODIMM_137",
+ "SODIMM_95",
+ "SODIMM_107",
+ "SODIMM_131",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_105";
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
- &pinctrl_gpio4 &pinctrl_gpio5 &pinctrl_gpio7>;
+ &pinctrl_gpio4 &pinctrl_gpio7>;
};
&iomuxc_snvs {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio2>;
+ pinctrl-0 = <&pinctrl_snvs_gpio1>;
};
&usdhc2 {
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 951a2a6c5a65..15621e03fa4d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -1,22 +1,54 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
- * Copyright 2018-2021 Toradex
+ * Copyright 2018-2022 Toradex
*/
#include "imx6ull.dtsi"
/ {
+ /* Ethernet aliases to ensure correct MAC addresses */
aliases {
ethernet0 = &fec2;
ethernet1 = &fec1;
};
- bl: backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_bl_on>;
- enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- status = "disabled";
+ power-supply = <&reg_3v3>;
+ pwms = <&pwm4 0 5000000 1>;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
+
+ wakeup {
+ debounce-interval = <10>;
+ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ panel_dpi: panel-dpi {
+ compatible = "edt,et057090dhu";
+ backlight = <&backlight>;
+ power-supply = <&reg_3v3>;
+ status = "okay";
+
+ port {
+ lcd_panel_in: endpoint {
+ remote-endpoint = <&lcdif_out>;
+ };
+ };
};
reg_module_3v3: regulator-module-3v3 {
@@ -35,7 +67,7 @@
regulator-max-microvolt = <3300000>;
};
- reg_sd1_vmmc: regulator-sd1-vmmc {
+ reg_sd1_vqmmc: regulator-sd1-vqmmc {
compatible = "regulator-gpio";
gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
@@ -47,11 +79,25 @@
states = <1800000 0x1 3300000 0x0>;
vin-supply = <&reg_module_3v3>;
};
+
+ reg_eth_phy: regulator-eth-phy {
+ compatible = "regulator-fixed-clock";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "+V3.3_ETH";
+ regulator-type = "voltage";
+ vin-supply = <&reg_module_3v3>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ startup-delay-us = <150000>;
+ };
};
&adc1 {
num-channels = <10>;
vref-supply = <&reg_module_3v3_avdd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
};
&can1 {
@@ -73,12 +119,14 @@
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
};
+/* Ethernet */
&fec2 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_enet2>;
pinctrl-1 = <&pinctrl_enet2_sleep>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
+ phy-supply = <&reg_eth_phy>;
status = "okay";
mdio {
@@ -93,9 +141,11 @@
};
};
+/* NAND */
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
+ fsl,use-minimum-ecc;
nand-on-flash-bbt;
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
@@ -103,15 +153,35 @@
status = "okay";
};
+/* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */
&i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ /* Atmel maxtouch controller */
+ atmel_mxt_ts: touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_atmel_conn>;
+ reg = <0x4a>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */
+ status = "disabled";
+ };
};
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
&i2c2 {
+ /* Use low frequency to compensate for the high pull-up values. */
+ clock-frequency = <40000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
@@ -119,7 +189,7 @@
scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- ad7879@2c {
+ ad7879_ts: touchscreen@2c {
compatible = "adi,ad7879-1";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_ad7879_int>;
@@ -140,23 +210,33 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif_dat
&pinctrl_lcdif_ctrl>;
+
+ port {
+ lcdif_out: endpoint {
+ remote-endpoint = <&lcd_panel_in>;
+ };
+ };
};
+/* PWM <A> */
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
};
+/* PWM <B> */
&pwm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm5>;
};
+/* PWM <C> */
&pwm6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm6>;
};
+/* PWM <D> */
&pwm7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm7>;
@@ -170,6 +250,7 @@
status = "disabled";
};
+/* Colibri UART_A */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>;
@@ -177,6 +258,7 @@
fsl,dte-mode;
};
+/* Colibri UART_B */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -184,12 +266,14 @@
fsl,dte-mode;
};
+/* Colibri UART_C */
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,dte-mode;
};
+/* Colibri USBC */
&usbotg1 {
dr_mode = "otg";
srp-disable;
@@ -197,14 +281,28 @@
adp-disable;
};
+/* Colibri USBH */
&usbotg2 {
dr_mode = "host";
};
+/* Colibri MMC/SD */
&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>;
assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+ disable-wp;
+ keep-power-in-suspend;
+ no-1-8-v;
+ vqmmc-supply = <&reg_sd1_vqmmc>;
+ wakeup-source;
};
&wdog1 {
@@ -214,13 +312,36 @@
};
&iomuxc {
- pinctrl_can_int: canint-grp {
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */
+ >;
+ };
+
+ pinctrl_atmel_adap: atmeladapgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */
+ MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */
+ >;
+ };
+
+ pinctrl_atmel_conn: atmelconngrp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
+ >;
+ };
+
+ pinctrl_can_int: canintgrp {
fsl,pins = <
MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */
>;
};
- pinctrl_enet2: enet2-grp {
+ pinctrl_enet2: enet2grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
@@ -235,7 +356,7 @@
>;
};
- pinctrl_enet2_sleep: enet2sleepgrp {
+ pinctrl_enet2_sleep: enet2-sleepgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0
MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0
@@ -250,13 +371,13 @@
>;
};
- pinctrl_ecspi1_cs: ecspi1-cs-grp {
+ pinctrl_ecspi1_cs: ecspi1csgrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */
>;
};
- pinctrl_ecspi1: ecspi1-grp {
+ pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */
MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */
@@ -264,27 +385,27 @@
>;
};
- pinctrl_flexcan1: flexcan1-grp {
+ pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020
MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020
>;
};
- pinctrl_flexcan2: flexcan2-grp {
+ pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020
MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020
>;
};
- pinctrl_gpio_bl_on: gpio-bl-on-grp {
+ pinctrl_gpio_bl_on: gpioblongrp {
fsl,pins = <
MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */
>;
};
- pinctrl_gpio1: gpio1-grp {
+ pinctrl_gpio1: gpio1grp {
fsl,pins = <
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */
MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */
@@ -297,7 +418,7 @@
>;
};
- pinctrl_gpio2: gpio2-grp { /* Camera */
+ pinctrl_gpio2: gpio2grp { /* Camera */
fsl,pins = <
MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */
MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */
@@ -307,26 +428,20 @@
>;
};
- pinctrl_gpio3: gpio3-grp { /* CAN2 */
+ pinctrl_gpio3: gpio3grp { /* CAN2 */
fsl,pins = <
MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */
MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */
>;
};
- pinctrl_gpio4: gpio4-grp {
+ pinctrl_gpio4: gpio4grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */
>;
};
- pinctrl_gpio5: gpio5-grp { /* ATMEL MXT TOUCH */
- fsl,pins = <
- MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */
- >;
- };
-
- pinctrl_gpio6: gpio6-grp { /* Wifi pins */
+ pinctrl_gpio6: gpio6grp { /* Wifi pins */
fsl,pins = <
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */
MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */
@@ -338,7 +453,7 @@
>;
};
- pinctrl_gpio7: gpio7-grp { /* CAN1 */
+ pinctrl_gpio7: gpio7grp { /* CAN1 */
fsl,pins = <
MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */
MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */
@@ -347,9 +462,9 @@
/*
* With an eMMC instead of a raw NAND device the following pins
- * are available at SODIMM pins
+ * are available at SODIMM pins.
*/
- pinctrl_gpmi_gpio: gpmi-gpio-grp {
+ pinctrl_gpmi_gpio: gpmigpiogrp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */
MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */
@@ -358,7 +473,7 @@
>;
};
- pinctrl_gpmi_nand: gpmi-nand-grp {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9
@@ -377,35 +492,35 @@
>;
};
- pinctrl_i2c1: i2c1-grp {
+ pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */
>;
};
- pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */
>;
};
- pinctrl_i2c2: i2c2-grp {
+ pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0
>;
};
- pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ pinctrl_i2c2_gpio: i2c2-gpiogrp {
fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001b8b0
+ MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0
+ MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0
>;
};
- pinctrl_lcdif_dat: lcdif-dat-grp {
+ pinctrl_lcdif_dat: lcdifdatgrp {
fsl,pins = <
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */
@@ -428,7 +543,7 @@
>;
};
- pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */
@@ -437,31 +552,31 @@
>;
};
- pinctrl_pwm4: pwm4-grp {
+ pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */
>;
};
- pinctrl_pwm5: pwm5-grp {
+ pinctrl_pwm5: pwm5grp {
fsl,pins = <
MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */
>;
};
- pinctrl_pwm6: pwm6-grp {
+ pinctrl_pwm6: pwm6grp {
fsl,pins = <
MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */
>;
};
- pinctrl_pwm7: pwm7-grp {
+ pinctrl_pwm7: pwm7grp {
fsl,pins = <
MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */
>;
};
- pinctrl_uart1: uart1-grp {
+ pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */
MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */
@@ -470,16 +585,16 @@
>;
};
- pinctrl_uart1_ctrl1: uart1-ctrl1-grp { /* Additional DTR, DCD */
+ pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */
fsl,pins = <
- MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 */
- MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 */
- MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 */
- MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 */
+ MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */
+ MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */
+ MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */
>;
};
- pinctrl_uart2: uart2-grp {
+ pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */
MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */
@@ -487,23 +602,23 @@
MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */
>;
};
- pinctrl_uart5: uart5-grp {
+ pinctrl_uart5: uart5grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */
MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */
>;
};
- pinctrl_usbh_reg: gpio-usbh-reg {
+ pinctrl_usbh_reg: usbhreggrp {
fsl,pins = <
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 */
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */
>;
};
- pinctrl_usdhc1: usdhc1-grp {
+ pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059 /* SODIMM 47 */
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059 /* SODIMM 190 */
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */
@@ -511,10 +626,10 @@
>;
};
- pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
@@ -522,25 +637,25 @@
>;
};
- pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
- pinctrl_usdhc2: usdhc2-grp {
+ pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069
MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069
MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069
- MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069
MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10
>;
@@ -561,7 +676,7 @@
>;
};
- pinctrl_wdog: wdog-grp {
+ pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
>;
@@ -569,65 +684,59 @@
};
&iomuxc_snvs {
- pinctrl_snvs_gpio1: snvs-gpio1-grp {
+ pinctrl_snvs_gpio1: snvsgpio1grp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */
MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */
- MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 */
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */
MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */
>;
};
- pinctrl_snvs_gpio2: snvs-gpio2-grp { /* ATMEL MXT TOUCH */
- fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */
- >;
- };
-
- pinctrl_snvs_gpio3: snvs-gpio3-grp { /* Wifi pins */
+ pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */
fsl,pins = <
MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */
>;
};
- pinctrl_snvs_ad7879_int: snvs-ad7879-int-grp { /* TOUCH Interrupt */
+ pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0
>;
};
- pinctrl_snvs_reg_sd: snvs-reg-sd-grp {
+ pinctrl_snvs_reg_sd: snvsregsdgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0
>;
};
- pinctrl_snvs_usbc_det: snvs-usbc-det-grp {
+ pinctrl_snvs_usbc_det: snvsusbcdetgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0
>;
};
- pinctrl_snvs_gpiokeys: snvs-gpiokeys-grp {
+ pinctrl_snvs_gpiokeys: snvsgpiokeysgrp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 */
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */
>;
};
- pinctrl_snvs_usdhc1_cd: snvs-usdhc1-cd-grp {
+ pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp {
fsl,pins = <
- MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 */
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */
>;
};
- pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+ pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp {
fsl,pins = <
MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0
>;
};
- pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
+ pinctrl_snvs_wifi_pdn: snvswifipdngrp {
fsl,pins = <
MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0
>;
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
index b7e984284e1a..d000606c0704 100644
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -18,7 +18,7 @@
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
new file mode 100644
index 000000000000..14adb87da911
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-emmc.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+ model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+ compatible = "phytec,imx6ull-phygate-tauri",
+ "phytec,imx6ull-phygate-tauri-emmc",
+ "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* EMMC-Version */
+&usdhc2 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
new file mode 100644
index 000000000000..ae396ac63443
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri-nand.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull-phytec-tauri.dtsi"
+
+/ {
+ model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+ compatible = "phytec,imx6ull-phygate-tauri",
+ "phytec,imx6ull-phygate-tauri-nand",
+ "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+/* NAND-Version */
+&gpmi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
new file mode 100644
index 000000000000..5464a52a1f94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-tauri.dtsi
@@ -0,0 +1,588 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Alexander Bauer <a.bauer@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+
+/ {
+
+ model = "PHYTEC phyGate-Tauri i.MX6 UltraLite";
+ compatible = "phytec,imx6ull-phygate-tauri",
+ "phytec,imx6ull-pcl063", "fsl,imx6ull";
+
+ aliases {
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-key";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ key {
+ label = "KEY-A";
+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_A>;
+ wakeup-source;
+ };
+ };
+
+ reg_adc1_vref_3v3: regulator-vref-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_s25fl064_hold: regulator-s25fl064-hold {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_s25fl064_hold>;
+ compatible = "regulator-fixed";
+ regulator-name = "s25fl064_hold";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_hub_vbus: regulator-hub-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhubpwr>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_hub_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1pwr>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ user_leds: user-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_user_leds>,
+ <&pinctrl_user_leds_snvs>;
+
+ user-led1 {
+ label = "yellow";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "off";
+ };
+
+ user-led2 {
+ label = "red";
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "off";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>,
+ <&pinctrl_ecspi1_cs>;
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>,
+ <&gpio3 10 GPIO_ACTIVE_LOW>,
+ <&gpio3 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm_tis: tpm@1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm>;
+ compatible = "tcg,tpm_tis-spi";
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ s25fl064: flash@2 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = " jedec,spi-nor";
+ reg = <2>;
+ spi-max-frequency = <40000000>;
+ m25p,fast-read;
+ status = "disabled";
+ };
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+ dmas = <&sdma 7 8 0>,
+ <&sdma 8 8 0>;
+ dma-names = "rx", "tx";
+ status = "okay";
+};
+
+&ethphy1 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy2>;
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp102: tmp@49 {
+ compatible = "ti,tmp102";
+ reg = <0x49>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tempsense>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ i2c_rtc: rtc@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_int>;
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ sda-gpios = <&gpio3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio3 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&mdio {
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
+ status = "okay";
+ };
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm6>;
+ status = "okay";
+};
+
+&pwm7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm7>;
+ status = "okay";
+};
+
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+/* UART4 * RS485 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ rts-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+ rs485-rts-active-high;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+};
+
+/* UART5 * RS232 */
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7>;
+ status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usb_hub_vbus>;
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "disabled";
+};
+
+&iomuxc_snvs {
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
+ >;
+ };
+
+ pinctrl_stmpe: stmpegrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
+ >;
+ };
+
+ pinctrl_tempsense: tempsensegrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17059
+ >;
+ };
+
+ pinctrl_tpm: tpmgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x17059
+ >;
+ };
+
+ pinctrl_usbhubpwr: usbhubpwrgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x17059
+ >;
+ };
+
+ pinctrl_user_leds_snvs: user_ledsgrp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x79
+ >;
+ };
+};
+
+&iomuxc {
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x17059 /* nUART_MUX_RS232 */
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x17059 /* nUART_MUX_DUAL_RX_TX */
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x79
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x100b1
+ MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x100b1
+ MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x100b1
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x100b1
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100b1
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x100b1
+ >;
+ };
+
+ pinctrl_ecspi1_cs: ecspi1csgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
+ MX6UL_PAD_LCD_DATA05__GPIO3_IO10 0x10b0
+ MX6UL_PAD_LCD_DATA06__GPIO3_IO11 0x10b0
+ >;
+ };
+
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b010
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b010
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b010
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b010
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA10__FLEXCAN2_TX 0x0b0b0
+ MX6UL_PAD_LCD_DATA11__FLEXCAN2_RX 0x0b0b0
+ >;
+ };
+
+ princtrl_flexcan2_en: flexcan2engrp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x17059
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0xb0
+ MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0xb0
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0xb0
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA01__I2C3_SCL 0xb0
+ MX6UL_PAD_LCD_DATA00__I2C3_SDA 0xb0
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA01__GPIO3_IO06 0xb0
+ MX6UL_PAD_LCD_DATA00__GPIO3_IO05 0xb0
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA03__I2C4_SCL 0xb0
+ MX6UL_PAD_LCD_DATA02__I2C4_SDA 0xb0
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA03__GPIO3_IO08 0xb0
+ MX6UL_PAD_LCD_DATA02__GPIO3_IO07 0xb0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_pwm6: pwm6grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__PWM6_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_pwm7: pwm7grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__PWM7_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__PWM8_OUT 0x0b0b0
+ >;
+ };
+
+ pinctrl_s25fl064_hold: s25fl064holdgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA12__GPIO3_IO17 0x100b1
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1
+ MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1
+ MX6UL_PAD_LCD_HSYNC__GPIO3_IO02 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x1b0b1
+ MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x80
+ >;
+ };
+
+ pinctrl_usbotg1pwr: usbotg1pwrgrp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_user_leds: userledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x79
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
new file mode 100644
index 000000000000..e593b7036fc7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6ULL2 SoM on MBa6ULx board";
+ compatible = "tq,imx6ull-tqma6ull2-mba6ulx", "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
new file mode 100644
index 000000000000..326e6da91ed4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulx-common.dtsi"
+
+/ {
+ model = "TQ-Systems TQMa6ULL2 SoM";
+ compatible = "tq,imx6ull-tqma6ull2", "fsl,imx6ull";
+};
+
+&usdhc2 {
+ fsl,tuning-step= <6>;
+ /* Errata ERR010450 Workaround */
+ max-frequency = <99000000>;
+ assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+ assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
new file mode 100644
index 000000000000..33437aae9822
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l-mba6ulx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6ull-tqma6ull2l.dtsi"
+#include "mba6ulx.dtsi"
+
+/ {
+ model = "TQ Systems TQMa6ULL2L SoM on MBa6ULx board";
+ compatible = "tq,imx6ull-tqma6ull2l-mba6ulx", "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
diff --git a/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
new file mode 100644
index 000000000000..8e4d5cd18614
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-tqma6ull2l.dtsi
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6ull.dtsi"
+#include "imx6ul-tqma6ul-common.dtsi"
+#include "imx6ul-tqma6ulxl-common.dtsi"
+
+/ {
+ model = "TQ Systems TQMa6ULL2L SoM";
+ compatible = "tq,imx6ull-tqma6ull2l", "fsl,imx6ull";
+};
+
+&usdhc2 {
+ fsl,tuning-step= <6>;
+ /* Errata ERR010450 Workaround */
+ max-frequency = <99000000>;
+ assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+ assigned-clock-rates = <0>, <198000000>;
+};
+
+&iomuxc {
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x00017031
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x00017039
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x00017039
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x00017039
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x00017039
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x00017039
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x00017039
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x00017039
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x00017039
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x00017039
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x000170f1
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x000170f1
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x000170f1
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x000170f1
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x000170f1
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x000170f1
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x000170f1
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x000170f1
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x000170f1
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x000170f1
+ /* rst */
+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x0001b051
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-smegw01.dts b/arch/arm/boot/dts/imx7d-smegw01.dts
new file mode 100644
index 000000000000..c6b32064a009
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-smegw01.dts
@@ -0,0 +1,469 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//
+// Copyright (C) 2020 PHYTEC Messtechnik GmbH
+// Author: Jens Lang <J.Lang@phytec.de>
+// Copyright (C) 2021 Fabio Estevam <festevam@denx.de>
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx7d.dtsi"
+
+/ {
+ model = "Storopack SMEGW01 board";
+ compatible = "storopack,imx7d-smegw01", "fsl,imx7d";
+
+ aliases {
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc3;
+ mmc2 = &usdhc2;
+ rtc0 = &i2c_rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reg_lte_on: regulator-lte-on {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lte_on>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "lte_on";
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_lte_nreset: regulator-lte-nreset {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lte_nreset>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "LTE_nReset";
+ gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi>;
+ regulator-name = "wifi_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wlan_rfkill: regulator-wlan-rfkill {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-2 = <&pinctrl_rfkill>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "wlan_rfkill";
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usbotg_vbus: regulator-usbotg-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 05 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ sram@0 {
+ compatible = "microchip,48l640";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <16000000>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ ethphy1: ethernet-phy@2 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy1>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 =<&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ i2c_rtc: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc_int>;
+ reg = <0x52>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_lpsr>;
+ dr_mode = "otg";
+ vbus-supply = <&reg_usbotg_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ enable-sdio-wakeup;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ sd-uhs-ddr50;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&reg_wifi>;
+ enable-sdio-wakeup;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+ assigned-clock-rates = <400000000>;
+ max-frequency = <200000000>;
+ bus-width = <8>;
+ fsl,tuning-step = <1>;
+ non-removable;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x04
+ MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x04
+ MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x04
+ MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x04
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x5
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x5
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x5
+ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x5
+ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x5
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x5
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x5
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x5
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x5
+ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x5
+ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x5
+ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x5
+ MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x7
+ MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x7
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x5
+ MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x5
+ MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x5
+ MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x5
+ MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x5
+ MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x5
+ MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x5
+ MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x5
+ MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x5
+ MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x5
+ MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x5
+ MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x5
+ MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x08
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x40000004
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x40000004
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0b0b0
+ MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x0b0b0
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0b0b0
+ >;
+ };
+
+ pinctrl_lte_on: lteongrp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x17059
+ >;
+ };
+
+ pinctrl_lte_nreset: ltenresetgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x17059
+ >;
+ };
+
+ pinctrl_rfkill: rfkillrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x17059
+ >;
+ };
+
+ pinctrl_rtc_int: rtcintgrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x17059
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x74
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x7c
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x7c
+ MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x74
+ >;
+ };
+
+ pinctrl_usbotg1_lpsr: usbotg1 {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x04
+ >;
+ };
+
+ pinctrl_usbotg1_pwr: usbotg1-pwr {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__USB_OTG1_PWR 0x04
+ >;
+ };
+
+ pinctrl_usbotg1_pwr_gpio: usbotg1-pwr-gpio {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x04
+ >;
+ };
+
+ pinctrl_usbotg2: usbotg2grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x04
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_CLK__SD2_CLK 0x19
+ MX7D_PAD_SD2_CMD__SD2_CMD 0x59
+ MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
+ MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
+ MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
+ MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
+ MX7D_PAD_SD2_CD_B__SD2_CD_B 0x08
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5d
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1d
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5d
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5d
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5d
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5d
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5d
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5d
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5d
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5d
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1d
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5e
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x1e
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5e
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5e
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5e
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5e
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5e
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5e
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5e
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5e
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1e
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x5f
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x0f
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5f
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5f
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5f
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5f
+ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5f
+ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5f
+ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5f
+ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5f
+ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1f
+ >;
+ };
+
+ pinctrl_wifi: wifigrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x04
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x04
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x74
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 5af6d58666f4..008e3da460f1 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -446,7 +446,7 @@
status = "disabled";
};
- iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ iomuxc_lpsr: pinctrl@302c0000 {
compatible = "fsl,imx7d-iomuxc-lpsr";
reg = <0x302c0000 0x10000>;
fsl,input-sel = <&iomuxc>;
diff --git a/arch/arm/boot/dts/imxrt1050-evk.dts b/arch/arm/boot/dts/imxrt1050-evk.dts
new file mode 100644
index 000000000000..6a9c10decf52
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-evk.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-pinfunc.h"
+
+/ {
+ model = "NXP IMXRT1050-evk board";
+ compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+ chosen {
+ stdout-path = &lpuart1;
+ };
+
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ mmc0 = &usdhc1;
+ serial0 = &lpuart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x2000000>;
+ };
+};
+
+&lpuart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart1>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
+ MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
+ >;
+ };
+
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
+ MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
+ MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
+ >;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc0>;
+ pinctrl-1 = <&pinctrl_usdhc0>;
+ pinctrl-2 = <&pinctrl_usdhc0>;
+ pinctrl-3 = <&pinctrl_usdhc0>;
+ cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
new file mode 100644
index 000000000000..77b911b06041
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include "armv7-m.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/imxrt1050-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clocks {
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ osc3M: osc3M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3000000>;
+ };
+ };
+
+ soc {
+ lpuart1: serial@40184000 {
+ compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x40184000 0x4000>;
+ interrupts = <20>;
+ clocks = <&clks IMXRT1050_CLK_LPUART1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ iomuxc: pinctrl@401f8000 {
+ compatible = "fsl,imxrt1050-iomuxc";
+ reg = <0x401f8000 0x4000>;
+ fsl,mux_mask = <0x7>;
+ };
+
+ anatop: anatop@400d8000 {
+ compatible = "fsl,imxrt-anatop";
+ reg = <0x400d8000 0x4000>;
+ };
+
+ clks: clock-controller@400fc000 {
+ compatible = "fsl,imxrt1050-ccm";
+ reg = <0x400fc000 0x4000>;
+ interrupts = <95>, <96>;
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL2_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL3_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+ <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+ assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+ <&clks IMXRT1050_CLK_PLL1_ARM>,
+ <&clks IMXRT1050_CLK_PLL2_SYS>,
+ <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+ <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+ <&clks IMXRT1050_CLK_PLL2_SYS>;
+ };
+
+ edma1: dma-controller@400e8000 {
+ #dma-cells = <2>;
+ compatible = "fsl,imx7ulp-edma";
+ reg = <0x400e8000 0x4000>,
+ <0x400ec000 0x4000>;
+ dma-channels = <32>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+ <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+ clock-names = "dma", "dmamux0";
+ clocks = <&clks IMXRT1050_CLK_DMA>,
+ <&clks IMXRT1050_CLK_DMA_MUX>;
+ };
+
+ usdhc1: mmc@402c0000 {
+ compatible ="fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x402c0000 0x4000>;
+ interrupts = <110>;
+ clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+ <&clks IMXRT1050_CLK_OSC>,
+ <&clks IMXRT1050_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ fsl,wp-controller;
+ no-1-8-v;
+ max-frequency = <4000000>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@401b8000 {
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+ reg = <0x401b8000 0x4000>;
+ interrupts = <80>, <81>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@401bc000 {
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+ reg = <0x401bc000 0x4000>;
+ interrupts = <82>, <83>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@401c0000 {
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+ reg = <0x401c0000 0x4000>;
+ interrupts = <84>, <85>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@401c4000 {
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+ reg = <0x401c4000 0x4000>;
+ interrupts = <86>, <87>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@400c0000 {
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
+ reg = <0x400c0000 0x4000>;
+ interrupts = <88>, <89>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpt: timer@401ec000 {
+ compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+ reg = <0x401ec000 0x4000>;
+ interrupts = <100>;
+ clocks = <&osc3M>;
+ clock-names = "per";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 66fec5f5d081..5d6d074011df 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -137,10 +137,10 @@
};
&spi0 {
- nor_flash: n25q128a11@0 {
+ nor_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "Micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <54000000>;
m25p,fast-read;
reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index d800f26b6275..88be868cf71e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -392,7 +392,7 @@
pinctrl-0 = <&qspi_pins>;
cdns,rclk-en;
- flash0: m25p80@0 {
+ flash0: flash@0 {
compatible = "s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 2a2d38cf0fff..bd84d7f0f2fe 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -325,7 +325,7 @@
cdns,rclk-en;
status = "okay";
- flash0: m25p80@0 {
+ flash0: flash@0 {
compatible = "s25fl256s1", "jedec,spi-nor";
reg = <0>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index ad4e22afe133..4a91f5ded402 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -161,10 +161,10 @@
};
&spi0 {
- nor_flash: n25q128a11@0 {
+ nor_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "Micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <54000000>;
m25p,fast-read;
reg = <0>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index e200533d26a4..1c880cf8fa91 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -110,10 +110,10 @@
};
&spi0 {
- nor_flash: n25q128a11@0 {
+ nor_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "Micron,n25q128a11";
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <54000000>;
m25p,fast-read;
reg = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index b3ad3f607d31..c32300611d2c 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -78,7 +78,7 @@
spi@10600 {
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 217bd374e52b..8f6c387d3a8b 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -198,7 +198,7 @@
spi@10600 {
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..0f555eb45bda
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+ model = "Kontron KSwitch D10 MMT 6G-2GS";
+ compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+ "microchip,lan9668", "microchip,lan966";
+
+ aliases {
+ i2c0 = &i2c4;
+ i2c1 = &i2c1;
+ };
+
+ sfp0: sfp0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c4>;
+ los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <2500>;
+ tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
+ rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ sfp1: sfp1 {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+ mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+ maximum-power-milliwatt = <2500>;
+ tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+ tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
+ rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&flx1 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c1: i2c@600 {
+ pinctrl-0 = <&fc1_c_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+};
+
+&flx4 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c4: i2c@600 {
+ pinctrl-0 = <&fc4_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+};
+
+&gpio {
+ fc1_c_pins: fc1-c-i2c-pins {
+ /* SCL, SDA */
+ pins = "GPIO_47", "GPIO_48";
+ function = "fc1_c";
+ };
+
+ fc4_b_pins: fc4-b-i2c-pins {
+ /* SCL, SDA */
+ pins = "GPIO_57", "GPIO_58";
+ function = "fc4_b";
+ };
+};
+
+&port2 {
+ phys = <&serdes 2 SERDES6G(0)>;
+ sfp = <&sfp0>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&port3 {
+ phys = <&serdes 3 SERDES6G(1)>;
+ sfp = <&sfp1>;
+ managed = "in-band-status";
+ phy-mode = "sgmii";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
new file mode 100644
index 000000000000..5feef9a59a79
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 8G
+ */
+
+/dts-v1/;
+#include "lan966x-kontron-kswitch-d10-mmt.dtsi"
+
+/ {
+ model = "Kontron KSwitch D10 MMT 8G";
+ compatible = "kontron,kswitch-d10-mmt-8g", "kontron,s1921",
+ "microchip,lan9668", "microchip,lan966";
+};
+
+&mdio0 {
+ phy2: ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ phy3: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&port2 {
+ phys = <&serdes 2 SERDES6G(0)>;
+ phy-handle = <&phy2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+};
+
+&port3 {
+ phys = <&serdes 3 SERDES6G(1)>;
+ phy-handle = <&phy3>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
new file mode 100644
index 000000000000..4cab1b3b3b29
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Common part of the device tree for the Kontron KSwitch D10 MMT
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+#include "dt-bindings/phy/phy-lan966x-serdes.h"
+
+/ {
+ aliases {
+ serial0 = &usart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+ priority = <200>;
+ };
+};
+
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+ status = "okay";
+
+ usart0: serial@200 {
+ pinctrl-0 = <&usart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+};
+
+&flx3 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "okay";
+
+ spi3: spi@400 {
+ pinctrl-0 = <&fc3_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&gpio {
+ fc3_b_pins: fc3-b-pins {
+ /* SCK, MISO, MOSI */
+ pins = "GPIO_51", "GPIO_52", "GPIO_53";
+ function = "fc3_b";
+ };
+
+ miim_c_pins: miim-c-pins {
+ /* MDC, MDIO */
+ pins = "GPIO_59", "GPIO_60";
+ function = "miim_c";
+ };
+
+ sgpio_a_pins: sgpio-a-pins {
+ /* SCK, D0, D1 */
+ pins = "GPIO_32", "GPIO_33", "GPIO_34";
+ function = "sgpio_a";
+ };
+
+ sgpio_b_pins: sgpio-b-pins {
+ /* LD */
+ pins = "GPIO_64";
+ function = "sgpio_b";
+ };
+
+ usart0_pins: usart0-pins {
+ /* RXD, TXD */
+ pins = "GPIO_25", "GPIO_26";
+ function = "fc0_b";
+ };
+};
+
+&mdio0 {
+ pinctrl-0 = <&miim_c_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+ clock-frequency = <2500000>;
+ status = "okay";
+
+ phy4: ethernet-phy@5 {
+ reg = <5>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy5: ethernet-phy@6 {
+ reg = <6>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy6: ethernet-phy@7 {
+ reg = <7>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ phy7: ethernet-phy@8 {
+ reg = <8>;
+ coma-mode-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&phy0 {
+ status = "okay";
+};
+
+&phy1 {
+ status = "okay";
+};
+
+&port0 {
+ phys = <&serdes 0 CU(0)>;
+ phy-handle = <&phy0>;
+ phy-mode = "gmii";
+ status = "okay";
+};
+
+&port1 {
+ phys = <&serdes 1 CU(1)>;
+ phy-handle = <&phy1>;
+ phy-mode = "gmii";
+ status = "okay";
+};
+
+&port4 {
+ phys = <&serdes 4 SERDES6G(2)>;
+ phy-handle = <&phy4>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port5 {
+ phys = <&serdes 5 SERDES6G(2)>;
+ phy-handle = <&phy5>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port6 {
+ phys = <&serdes 6 SERDES6G(2)>;
+ phy-handle = <&phy6>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&port7 {
+ phys = <&serdes 7 SERDES6G(2)>;
+ phy-handle = <&phy7>;
+ phy-mode = "qsgmii";
+ status = "okay";
+};
+
+&serdes {
+ status = "okay";
+};
+
+&sgpio {
+ pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+ pinctrl-names = "default";
+ bus-frequency = <8000000>;
+ /* arbitrary range because all GPIOs are in software mode */
+ microchip,sgpio-port-ranges = <0 11>;
+ status = "okay";
+
+ sgpio_in: gpio@0 {
+ ngpios = <128>;
+ };
+
+ sgpio_out: gpio@1 {
+ ngpios = <128>;
+ };
+};
+
+&switch {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index 3281af90ac6d..3c7e3a7d6f14 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -35,7 +35,7 @@
function = "fc3_b";
};
- can0_b_pins: can0_b_pins {
+ can0_b_pins: can0-b-pins {
/* RX, TX */
pins = "GPIO_35", "GPIO_36";
function = "can0_b";
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
index 7d2869648050..3cb02fffe716 100644
--- a/arch/arm/boot/dts/lan966x.dtsi
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -84,6 +84,68 @@
#size-cells = <1>;
ranges;
+ switch: switch@e0000000 {
+ compatible = "microchip,lan966x-switch";
+ reg = <0xe0000000 0x0100000>,
+ <0xe2000000 0x0800000>;
+ reg-names = "cpu", "gcb";
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "xtr", "fdma", "ana", "ptp",
+ "ptp-ext";
+ resets = <&reset 0>;
+ reset-names = "switch";
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
+
+ port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ port2: port@2 {
+ reg = <2>;
+ status = "disabled";
+ };
+
+ port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ port4: port@4 {
+ reg = <4>;
+ status = "disabled";
+ };
+
+ port5: port@5 {
+ reg = <5>;
+ status = "disabled";
+ };
+
+ port6: port@6 {
+ reg = <6>;
+ status = "disabled";
+ };
+
+ port7: port@7 {
+ reg = <7>;
+ status = "disabled";
+ };
+ };
+ };
+
flx0: flexcom@e0040000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0040000 0x100>;
@@ -92,6 +154,47 @@
#size-cells = <1>;
ranges = <0x0 0xe0040000 0x800>;
status = "disabled";
+
+ usart0: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi0: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(3)>,
+ <&dma0 AT91_XDMAC_DT_PERID(2)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
flx1: flexcom@e0044000 {
@@ -102,6 +205,47 @@
#size-cells = <1>;
ranges = <0x0 0xe0044000 0x800>;
status = "disabled";
+
+ usart1: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+ <&dma0 AT91_XDMAC_DT_PERID(4)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi1: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+ <&dma0 AT91_XDMAC_DT_PERID(4)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(5)>,
+ <&dma0 AT91_XDMAC_DT_PERID(4)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
trng: rng@e0048000 {
@@ -114,9 +258,9 @@
compatible = "atmel,at91sam9g46-aes";
reg = <0xe004c000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
- <&dma0 AT91_XDMAC_DT_PERID(12)>;
- dma-names = "rx", "tx";
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+ <&dma0 AT91_XDMAC_DT_PERID(13)>;
+ dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "aes_clk";
};
@@ -129,6 +273,47 @@
#size-cells = <1>;
ranges = <0x0 0xe0060000 0x800>;
status = "disabled";
+
+ usart2: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+ <&dma0 AT91_XDMAC_DT_PERID(6)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi2: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+ <&dma0 AT91_XDMAC_DT_PERID(6)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
+ <&dma0 AT91_XDMAC_DT_PERID(6)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
flx3: flexcom@e0064000 {
@@ -144,11 +329,42 @@
compatible = "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+ <&dma0 AT91_XDMAC_DT_PERID(8)>;
+ dma-names = "tx", "rx";
clocks = <&nic_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
status = "disabled";
};
+
+ spi3: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+ <&dma0 AT91_XDMAC_DT_PERID(8)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(9)>,
+ <&dma0 AT91_XDMAC_DT_PERID(8)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
dma0: dma-controller@e0068000 {
@@ -178,6 +394,47 @@
#size-cells = <1>;
ranges = <0x0 0xe0070000 0x800>;
status = "disabled";
+
+ usart4: serial@200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+ <&dma0 AT91_XDMAC_DT_PERID(10)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "usart";
+ atmel,fifo-size = <32>;
+ status = "disabled";
+ };
+
+ spi4: spi@400 {
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+ <&dma0 AT91_XDMAC_DT_PERID(10)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ clock-names = "spi_clk";
+ atmel,fifo-size = <32>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@600 {
+ compatible = "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(11)>,
+ <&dma0 AT91_XDMAC_DT_PERID(10)>;
+ dma-names = "tx", "rx";
+ clocks = <&nic_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
timer0: timer@e008c000 {
@@ -196,6 +453,11 @@
status = "disabled";
};
+ cpu_ctrl: syscon@e00c0000 {
+ compatible = "microchip,lan966x-cpu-syscon", "syscon";
+ reg = <0xe00c0000 0x350>;
+ };
+
can0: can@e081c000 {
compatible = "bosch,m_can";
reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
@@ -211,10 +473,20 @@
status = "disabled";
};
+ reset: reset-controller@e200400c {
+ compatible = "microchip,lan966x-switch-reset";
+ reg = <0xe200400c 0x4>;
+ reg-names = "gcb";
+ #reset-cells = <1>;
+ cpu-syscon = <&cpu_ctrl>;
+ };
+
gpio: pinctrl@e2004064 {
compatible = "microchip,lan966x-pinctrl";
reg = <0xe2004064 0xb4>,
<0xe2010024 0x138>;
+ resets = <&reset 0>;
+ reset-names = "switch";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 78>;
@@ -223,6 +495,81 @@
#interrupt-cells = <2>;
};
+ mdio0: mdio@e2004118 {
+ compatible = "microchip,lan966x-miim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe2004118 0x24>;
+ clocks = <&sys_clk>;
+ status = "disabled";
+ };
+
+ mdio1: mdio@e200413c {
+ compatible = "microchip,lan966x-miim";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xe200413c 0x24>,
+ <0xe2010020 0x4>;
+ clocks = <&sys_clk>;
+ status = "disabled";
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ phy1: ethernet-phy@2 {
+ reg = <2>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+
+ sgpio: gpio@e2004190 {
+ compatible = "microchip,sparx5-sgpio";
+ reg = <0xe2004190 0x118>;
+ clocks = <&sys_clk>;
+ resets = <&reset 0>;
+ reset-names = "switch";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ sgpio_in: gpio@0 {
+ compatible = "microchip,sparx5-sgpio-bank";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ sgpio_out: gpio@1 {
+ compatible = "microchip,sparx5-sgpio-bank";
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ };
+ };
+
+ hwmon: hwmon@e2010180 {
+ compatible = "microchip,lan9668-hwmon";
+ reg = <0xe2010180 0xc>,
+ <0xe20042a8 0xc>;
+ reg-names = "pvt", "fan";
+ clocks = <&sys_clk>;
+ };
+
+ serdes: serdes@e202c000 {
+ compatible = "microchip,lan966x-serdes";
+ reg = <0xe202c000 0x9c>,
+ <0xe2004010 0x4>;
+ #phy-cells = <2>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@e8c11000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 55b619c99e24..9ba0ea4eb48a 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -27,6 +27,8 @@
/* HS USB Host PHY on PORT 1 */
hsusb2_phy: hsusb2_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_reset_pin>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
#phy-cells = <0>;
@@ -144,6 +146,8 @@
};
&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_pins>;
port2-mode = "ehci-phy";
};
@@ -151,10 +155,7 @@
phys = <0 &hsusb2_phy>;
};
-
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb2_pins>;
mmc3_pins: pinmux_mm3_pins {
pinctrl-single,pins = <
@@ -250,8 +251,7 @@
};
&omap3_pmx_wkup {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb2_reset_pin>;
+
hsusb2_reset_pin: pinmux_hsusb1_reset_pin {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
diff --git a/arch/arm/boot/dts/ls1021a-iot.dts b/arch/arm/boot/dts/ls1021a-iot.dts
new file mode 100644
index 000000000000..66bcdaf4b6f9
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-iot.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021-2022 NXP
+ *
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A-IOT Board";
+ compatible = "fsl,ls1021a-iot", "fsl,ls1021a";
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ reg_3p3v: regulator-3V3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_2p5v: regulator-2V5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker Ext",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "Microphone Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Speaker Ext", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ frame-master;
+ bitclock-master;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+};
+
+&can0{
+ status = "disabled";
+};
+
+&can1{
+ status = "disabled";
+};
+
+&can2{
+ status = "disabled";
+};
+
+&can3{
+ status = "okay";
+};
+
+&dcu {
+ display = <&display>;
+ status = "okay";
+
+ display: display@0 {
+ bits-per-pixel = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: mode0 {
+ clock-frequency = <25000000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <80>;
+ hfront-porch = <80>;
+ vback-porch = <16>;
+ vfront-porch = <16>;
+ hsync-len = <12>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+};
+
+&enet0 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "sgmii";
+ status = "okay";
+};
+
+&enet2 {
+ fixed-link = <0 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
+&esdhc{
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9555: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sgtl5000: audio-codec@2a {
+ #sound-dai-cells=<0x0>;
+ compatible = "fsl,sgtl5000";
+ reg = <0x2a>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_2p5v>;
+ clocks = <&sys_mclk>;
+ };
+
+ max1239: adc@35 {
+ compatible = "maxim,max1239";
+ reg = <0x35>;
+ #io-channel-cells = <1>;
+ };
+
+ ina2201: core-monitor@44 {
+ compatible = "ti,ina220";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+
+ ina2202: current-monitor@45 {
+ compatible = "ti,ina220";
+ reg = <0x45>;
+ shunt-resistor = <1000>;
+ };
+
+ lm75b: thermal-monitor@48 {
+ compatible = "national,lm75b";
+ reg = <0x48>;
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&qspi {
+ num-cs = <2>;
+ status = "okay";
+
+ s25fl128s: flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 2e69d6eab4d1..6c88be2a7e8e 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -122,8 +122,8 @@
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
};
- ifc: ifc@1530000 {
- compatible = "fsl,ifc", "simple-bus";
+ ifc: memory-controller@1530000 {
+ compatible = "fsl,ifc";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -192,7 +192,7 @@
<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0x7 0x0>;
};
};
diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
new file mode 100644
index 000000000000..aac42df9ecf6
--- /dev/null
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright 2018-2022 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/ {
+ model = "TQ-Systems MBA6ULx Baseboard";
+
+ aliases {
+ mmc0 = &usdhc2;
+ mmc1 = &usdhc1;
+ rtc0 = &rtc0;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&reg_mba6ul_3v3>;
+ enable-gpios = <&expander_out0 4 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ gpios = <&expander_out1 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_buttons: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_buttons>;
+
+ button1 {
+ label = "s14";
+ linux,code = <KEY_1>;
+ gpios = <&expander_in0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ button2 {
+ label = "s6";
+ linux,code = <KEY_2>;
+ gpios = <&expander_in0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button3 {
+ label = "s7";
+ linux,code = <KEY_3>;
+ gpios = <&expander_in0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ power-button {
+ label = "POWER";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led1 {
+ label = "led1";
+ gpios = <&expander_out1 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&expander_out1 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_lcd_pwr: regulator-lcd-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-pwr";
+ gpio = <&expander_out0 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ status = "disabled";
+ };
+
+ reg_mba6ul_3v3: regulator-mba6ul-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6ul-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_mba6ul_5v0: regulator-mba6ul-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6ul-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_mpcie: regulator-mpcie-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "mpcie-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&expander_out0 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ startup-delay-us = <500000>;
+ vin-supply = <&reg_mba6ul_3v3>;
+ };
+
+ reg_otg2vbus_5v0: regulator-otg2-vbus-5v0 {
+ compatible = "regulator-fixed";
+ gpio = <&expander_out1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "otg2-vbus-supply-5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_mpcie>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x6000000>;
+ linux,cma-default;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-tlv320aic32x4";
+ model = "imx-audio-tlv320aic32x4";
+ ssi-controller = <&sai1>;
+ audio-codec = <&tlv320aic32x4>;
+ audio-asrc = <&asrc>;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&reg_mba6ul_3v3>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_mba6ul_3v3>;
+ status = "okay";
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <768000000>;
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ num-cs = <1>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
+ phy-supply = <&reg_mba6ul_3v3>;
+ phy-reset-gpios = <&expander_out1 1 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-reset-post-delay = <1>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>, <&pinctrl_enet2_mdc>;
+ phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
+ phy-supply = <&reg_mba6ul_3v3>;
+ phy-reset-gpios = <&expander_out1 2 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <25>;
+ phy-reset-post-delay = <1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ reg = <0>;
+ max-speed = <100>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ reg = <1>;
+ max-speed = <100>;
+ };
+ };
+};
+
+&i2c4 {
+ tlv320aic32x4: audio-codec@18 {
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&clks IMX6UL_CLK_SAI1>;
+ clock-names = "mclk";
+ ldoin-supply = <&reg_mba6ul_3v3>;
+ iov-supply = <&reg_mba6ul_3v3>;
+ };
+
+ jc42: temperature-sensor@19 {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x19>;
+ };
+
+ expander_out0: gpio-expander@20 {
+ compatible = "nxp,pca9554";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ expander_in0: gpio-expander@21 {
+ compatible = "nxp,pca9554";
+ reg = <0x21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_expander_in0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ enet1_int-hog {
+ gpio-hog;
+ gpios = <6 0>;
+ input;
+ };
+
+ enet2_int-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ input;
+ };
+ };
+
+ expander_out1: gpio-expander@22 {
+ compatible = "nxp,pca9554";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ analog_touch: touchscreen@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio4>;
+ interrupt-controller;
+ status = "disabled";
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+ st,ave-ctrl = <3>; /* 8 sample average control */
+ st,fraction-z = <7>; /* 7 length fractional part in z */
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ st,mod-12b = <1>; /* 12-bit ADC */
+ st,ref-sel = <0>; /* internal ADC reference */
+ st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+ st,settling = <3>; /* 1 ms panel driver settling time */
+ st,touch-det-delay = <5>; /* 5 ms touch detect interrupt delay */
+ };
+ };
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97b: eeprom@51 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&sai1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI1_SEL>,
+ <&clks IMX6UL_CLK_SAI1>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ assigned-clock-rates = <0>, <24000000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ /* for DTE mode, add below change */
+ /* fsl,dte-mode; */
+ /* pinctrl-0 = <&pinctrl_uart6dte>; */
+ uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+ status = "okay";
+};
+
+/* otg-port */
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ power-active-high;
+ over-current-active-low;
+ /* we implement only dual role but not a fully featured OTG */
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+/* 7-port usb hub */
+/* id, pwr, oc pins not connected */
+&usbotg2 {
+ disable-over-current;
+ vbus-supply = <&reg_otg2vbus_5v0>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_mba6ul_3v3>;
+ vqmmc-supply = <&reg_vccsd>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_buttons: buttonsgrp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x100b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK 0x1b020
+ MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO 0x1b020
+ MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI 0x1b020
+ MX6UL_PAD_UART4_RX_DATA__ECSPI2_SS0 0x1b020
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b0a8
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0a0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0a0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b0a8
+ >;
+ };
+
+ pinctrl_enet2_mdc: enet2mdcgrp {
+ fsl,pins = <
+ /* mdio */
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_expander_in0: expanderin0grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x1b0b1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA05__SAI1_TX_BCLK 0x1b0b1
+ MX6UL_PAD_CSI_DATA04__SAI1_TX_SYNC 0x1b0b1
+ MX6UL_PAD_CSI_DATA07__SAI1_TX_DATA 0x1f0b8
+ MX6UL_PAD_CSI_DATA06__SAI1_RX_DATA 0x110b0
+ MX6UL_PAD_CSI_DATA01__SAI1_MCLK 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x1b0b1
+ MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x1b0b1
+ MX6UL_PAD_CSI_VSYNC__UART6_DCE_RTS 0x1b0b1
+ MX6UL_PAD_CSI_HSYNC__UART6_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart6dte: uart6dte {
+ fsl,pins = <
+ MX6UL_PAD_CSI_PIXCLK__UART6_DTE_TX 0x1b0b1
+ MX6UL_PAD_CSI_MCLK__UART6_DTE_RX 0x1b0b1
+ MX6UL_PAD_CSI_HSYNC__UART6_DTE_RTS 0x1b0b1
+ MX6UL_PAD_CSI_VSYNC__UART6_DTE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x00017059
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x0001b0b0
+ MX6UL_PAD_GPIO1_IO04__USB_OTG1_PWR 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x00017059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x00017059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x00017059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x00017059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x00017059
+ /* WP */
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170b9
+ /* WP */
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x00017069
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x000170f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x000170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x000170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x000170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x000170f9
+ /* WP */
+ MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0001b099
+ /* CD */
+ MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0001b099
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0001b099
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 61ec929ab86e..56ea875c418c 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -65,7 +65,7 @@
pinctrl-0 = <&spi_nor_pins>;
pinctrl-names = "default";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25l1606e";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4776f85d6d5b..ef583cfd3baf 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -564,7 +564,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
@@ -577,7 +576,6 @@
clocks = <&imgsys CLK_IMG_VENC>;
clock-names = "jpgenc";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
<&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
};
diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi
index bcb0846e29fd..3adab5cd1fef 100644
--- a/arch/arm/boot/dts/mt7623n.dtsi
+++ b/arch/arm/boot/dts/mt7623n.dtsi
@@ -121,7 +121,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
- mediatek,larb = <&larb2>;
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
};
@@ -144,7 +143,6 @@
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_OVL>;
iommus = <&iommu MT2701_M4U_PORT_DISP_OVL_0>;
- mediatek,larb = <&larb0>;
};
rdma0: rdma@14008000 {
@@ -154,7 +152,6 @@
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_RDMA>;
iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA>;
- mediatek,larb = <&larb0>;
};
wdma@14009000 {
@@ -164,7 +161,6 @@
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_WDMA>;
iommus = <&iommu MT2701_M4U_PORT_DISP_WDMA>;
- mediatek,larb = <&larb0>;
};
bls: pwm@1400a000 {
@@ -215,7 +211,6 @@
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu MT2701_M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb0>;
};
dpi0: dpi@14014000 {
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 41744cc2bc72..01e1bb7c3c6c 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi
@@ -17,7 +17,7 @@
&fast_timer {
/* compatible = "lsi,zevio-timer"; */
- reg = <0x90010000 0x1000>, <0x900A0010 0x8>;
+ reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
};
&uart {
@@ -30,12 +30,12 @@
&timer0 {
/* compatible = "lsi,zevio-timer"; */
- reg = <0x900C0000 0x1000>, <0x900A0018 0x8>;
+ reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
};
&timer1 {
compatible = "lsi,zevio-timer";
- reg = <0x900D0000 0x1000>, <0x900A0020 0x8>;
+ reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
};
&keypad {
@@ -66,10 +66,10 @@
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "lsi,zevio-intc";
interrupt-controller;
- reg = <0xDC000000 0x1000>;
+ reg = <0xdc000000 0x1000>;
#interrupt-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 0c16b04e2744..590b7dff6ae5 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts
@@ -92,10 +92,10 @@
#address-cells = <1>;
#size-cells = <1>;
- intc: interrupt-controller@DC000000 {
+ intc: interrupt-controller@dc000000 {
compatible = "arm,pl190-vic";
interrupt-controller;
- reg = <0xDC000000 0x1000>;
+ reg = <0xdc000000 0x1000>;
#interrupt-cells = <1>;
};
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 90e033d9141f..bb240e6a3a6f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi
@@ -20,9 +20,9 @@
reg = <0x00000000 0x80000>;
};
- sram: sram@A4000000 {
+ sram: sram@a4000000 {
device = "memory";
- reg = <0xA4000000 0x20000>;
+ reg = <0xa4000000 0x20000>;
};
timer_clk: timer_clk {
@@ -33,12 +33,12 @@
base_clk: base_clk {
#clock-cells = <0>;
- reg = <0x900B0024 0x4>;
+ reg = <0x900b0024 0x4>;
};
ahb_clk: ahb_clk {
#clock-cells = <0>;
- reg = <0x900B0024 0x4>;
+ reg = <0x900b0024 0x4>;
clocks = <&base_clk>;
};
@@ -71,28 +71,28 @@
#size-cells = <1>;
ranges;
- spi: spi@A9000000 {
- reg = <0xA9000000 0x1000>;
+ spi: spi@a9000000 {
+ reg = <0xa9000000 0x1000>;
};
- usb0: usb@B0000000 {
+ usb0: usb@b0000000 {
compatible = "lsi,zevio-usb";
- reg = <0xB0000000 0x1000>;
+ reg = <0xb0000000 0x1000>;
interrupts = <8>;
usb-phy = <&usb_phy>;
vbus-supply = <&vbus_reg>;
};
- usb1: usb@B4000000 {
- reg = <0xB4000000 0x1000>;
+ usb1: usb@b4000000 {
+ reg = <0xb4000000 0x1000>;
interrupts = <9>;
status = "disabled";
};
- lcd: lcd@C0000000 {
+ lcd: lcd@c0000000 {
compatible = "arm,pl111", "arm,primecell";
- reg = <0xC0000000 0x1000>;
+ reg = <0xc0000000 0x1000>;
interrupts = <21>;
/*
@@ -105,17 +105,17 @@
clock-names = "clcdclk", "apb_pclk";
};
- adc: adc@C4000000 {
- reg = <0xC4000000 0x1000>;
+ adc: adc@c4000000 {
+ reg = <0xc4000000 0x1000>;
interrupts = <11>;
};
- tdes: crypto@C8010000 {
- reg = <0xC8010000 0x1000>;
+ tdes: crypto@c8010000 {
+ reg = <0xc8010000 0x1000>;
};
- sha256: crypto@CC000000 {
- reg = <0xCC000000 0x1000>;
+ sha256: crypto@cc000000 {
+ reg = <0xcc000000 0x1000>;
};
apb@90000000 {
@@ -143,16 +143,16 @@
interrupts = <1>;
};
- timer0: timer@900C0000 {
- reg = <0x900C0000 0x1000>;
+ timer0: timer@900c0000 {
+ reg = <0x900c0000 0x1000>;
clocks = <&timer_clk>, <&timer_clk>,
<&timer_clk>;
clock-names = "timer0clk", "timer1clk",
"apb_pclk";
};
- timer1: timer@900D0000 {
- reg = <0x900D0000 0x1000>;
+ timer1: timer@900d0000 {
+ reg = <0x900d0000 0x1000>;
interrupts = <19>;
clocks = <&timer_clk>, <&timer_clk>,
<&timer_clk>;
@@ -171,18 +171,18 @@
interrupts = <4>;
};
- misc: misc@900A0000 {
- reg = <0x900A0000 0x1000>;
+ misc: misc@900a0000 {
+ reg = <0x900a0000 0x1000>;
};
- pwr: pwr@900B0000 {
- reg = <0x900B0000 0x1000>;
+ pwr: pwr@900b0000 {
+ reg = <0x900b0000 0x1000>;
interrupts = <15>;
};
- keypad: input@900E0000 {
+ keypad: input@900e0000 {
compatible = "ti,nspire-keypad";
- reg = <0x900E0000 0x1000>;
+ reg = <0x900e0000 0x1000>;
interrupts = <16>;
scan-interval = <1000>;
@@ -191,8 +191,8 @@
clocks = <&apb_pclk>;
};
- contrast: contrast@900F0000 {
- reg = <0x900F0000 0x1000>;
+ contrast: contrast@900f0000 {
+ reg = <0x900f0000 0x1000>;
};
led: led@90110000 {
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
index eb6eb21cb2a4..d10669fcd527 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts
@@ -358,7 +358,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0cs1_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -406,7 +406,7 @@
pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -416,7 +416,7 @@
m25p,fast-read;
label = "pnor";
};
- spi-nor@1 {
+ flash@1 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index d4ff49939a3d..491606c4f044 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -135,7 +135,7 @@
pinctrl-0 = <&spi0cs1_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
index 82a104b2a65f..a0c2d7652625 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-kudo.dts
@@ -380,7 +380,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi0cs1_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -415,7 +415,7 @@
};
};
};
- spi-nor@1 {
+ flash@1 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -440,7 +440,7 @@
&fiu3 {
pinctrl-0 = <&spi3_pins>;
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
index 0334641f8829..3dad32834e5e 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts
@@ -67,7 +67,7 @@
&fiu0 {
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -128,7 +128,7 @@
&fiu3 {
pinctrl-0 = <&spi3_pins>, <&spi3quad_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -324,7 +324,7 @@
&spi0 {
cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
status = "okay";
- Flash@0 {
+ flash@0 {
compatible = "winbond,w25q128",
"jedec,spi-nor";
reg = <0x0>;
@@ -345,7 +345,7 @@
&spi1 {
cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
status = "okay";
- Flash@0 {
+ flash@0 {
compatible = "winbond,w25q128fw",
"jedec,spi-nor";
reg = <0x0>;
diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
index 767e0ac0df7c..132e702281fc 100644
--- a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts
@@ -100,7 +100,7 @@
pinctrl-0 = <&spi0cs1_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -139,7 +139,7 @@
};
};
- spi-nor@1 {
+ flash@1 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
@@ -166,7 +166,7 @@
pinctrl-0 = <&spi3_pins>;
status = "okay";
- spi-nor@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index a858ebfa1500..35eced6521ef 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -370,7 +370,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
+ ethernet: ethernet@1 {
compatible = "usb424,ec00";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/omap3430es1-clocks.dtsi b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
index 2ec3628d3315..24adfac26be0 100644
--- a/arch/arm/boot/dts/omap3430es1-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi
@@ -46,37 +46,61 @@
ti,bit-shift = <2>;
};
- d2d_26m_fck: d2d_26m_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&sys_ck>;
- reg = <0x0a00>;
- ti,bit-shift = <3>;
- };
-
- fshostusb_fck: fshostusb_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <5>;
- };
-
- ssi_ssr_gate_fck_3430es1: ssi_ssr_gate_fck_3430es1@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&corex2_fck>;
- ti,bit-shift = <0>;
- reg = <0x0a00>;
- };
-
- ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@a40 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&corex2_fck>;
- ti,bit-shift = <8>;
- reg = <0x0a40>;
- ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ d2d_26m_fck: clock-d2d-26m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "d2d_26m_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ fshostusb_fck: clock-fshostusb-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "fshostusb_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <5>;
+ };
+
+ ssi_ssr_gate_fck_3430es1: clock-ssi-ssr-gate-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "ssi_ssr_gate_fck_3430es1";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_div_fck_3430es1: clock-ssi-ssr-div-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "ssi_ssr_div_fck_3430es1";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <8>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ };
+
+ usb_l4_div_ick: clock-usb-l4-div-ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "usb_l4_div_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <4>;
+ ti,max-div = <1>;
+ ti,index-starts-at-one;
+ };
};
ssi_ssr_fck: ssi_ssr_fck_3430es1 {
@@ -93,20 +117,43 @@
clock-div = <2>;
};
- hsotgusb_ick_3430es1: hsotgusb_ick_3430es1@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-no-wait-interface-clock";
- clocks = <&core_l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <4>;
- };
-
- fac_ick: fac_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <8>;
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ hsotgusb_ick_3430es1: clock-hsotgusb-ick-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clock-output-names = "hsotgusb_ick_3430es1";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ fac_ick: clock-fac-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "fac_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <8>;
+ };
+
+ ssi_ick: clock-ssi-ick-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-no-wait-interface-clock";
+ clock-output-names = "ssi_ick_3430es1";
+ clocks = <&ssi_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+
+ usb_l4_gate_ick: clock-usb-l4-gate-ick {
+ #clock-cells = <0>;
+ compatible = "ti,composite-interface-clock";
+ clock-output-names = "usb_l4_gate_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <5>;
+ };
};
ssi_l4_ick: ssi_l4_ick {
@@ -117,45 +164,26 @@
clock-div = <1>;
};
- ssi_ick: ssi_ick_3430es1@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-no-wait-interface-clock";
- clocks = <&ssi_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <0>;
- };
-
- usb_l4_gate_ick: usb_l4_gate_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,composite-interface-clock";
- clocks = <&l4_ick>;
- ti,bit-shift = <5>;
- reg = <0x0a10>;
- };
-
- usb_l4_div_ick: usb_l4_div_ick@a40 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&l4_ick>;
- ti,bit-shift = <4>;
- ti,max-div = <1>;
- reg = <0x0a40>;
- ti,index-starts-at-one;
- };
-
usb_l4_ick: usb_l4_ick {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>;
};
- dss1_alwon_fck: dss1_alwon_fck_3430es1@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
- reg = <0x0e00>;
- ti,set-rate-parent;
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es1 {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es1";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
};
dss_ick: dss_ick_3430es1@e10 {
diff --git a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
index 21079cdf2663..8374532f20e2 100644
--- a/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi
@@ -13,45 +13,76 @@
clock-div = <1>;
};
- aes1_ick: aes1_ick@a14 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&security_l4_ick2>;
- ti,bit-shift = <3>;
- reg = <0x0a14>;
- };
+ clock@a14 {
+ compatible = "ti,clksel";
+ reg = <0xa14>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- rng_ick: rng_ick@a14 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&security_l4_ick2>;
- reg = <0x0a14>;
- ti,bit-shift = <2>;
- };
+ aes1_ick: clock-aes1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "aes1_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <3>;
+ };
- sha11_ick: sha11_ick@a14 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&security_l4_ick2>;
- reg = <0x0a14>;
- ti,bit-shift = <1>;
- };
+ rng_ick: clock-rng-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "rng_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <2>;
+ };
- des1_ick: des1_ick@a14 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&security_l4_ick2>;
- reg = <0x0a14>;
- ti,bit-shift = <0>;
+ sha11_ick: clock-sha11-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sha11_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <1>;
+ };
+
+ des1_ick: clock-des1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "des1_ick";
+ clocks = <&security_l4_ick2>;
+ ti,bit-shift = <0>;
+ };
+
+ pka_ick: clock-pka-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "pka_ick";
+ clocks = <&security_l3_ick>;
+ ti,bit-shift = <4>;
+ };
};
- cam_mclk: cam_mclk@f00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&dpll4_m5x2_ck>;
- ti,bit-shift = <0>;
- reg = <0x0f00>;
- ti,set-rate-parent;
+ /* CM_FCLKEN_CAM */
+ clock@f00 {
+ compatible = "ti,clksel";
+ reg = <0xf00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ cam_mclk: clock-cam-mclk {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "cam_mclk";
+ clocks = <&dpll4_m5x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
+
+ csi2_96m_fck: clock-csi2-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "csi2_96m_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <1>;
+ };
};
cam_ick: cam_ick@f10 {
@@ -62,14 +93,6 @@
ti,bit-shift = <0>;
};
- csi2_96m_fck: csi2_96m_fck@f00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0f00>;
- ti,bit-shift = <1>;
- };
-
security_l3_ick: security_l3_ick {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -78,44 +101,51 @@
clock-div = <1>;
};
- pka_ick: pka_ick@a14 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&security_l3_ick>;
- reg = <0x0a14>;
- ti,bit-shift = <4>;
- };
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- icr_ick: icr_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <29>;
- };
+ icr_ick: clock-icr-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "icr_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <29>;
+ };
- des2_ick: des2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <26>;
- };
+ des2_ick: clock-des2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "des2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <26>;
+ };
- mspro_ick: mspro_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <23>;
- };
+ mspro_ick: clock-mspro-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mspro_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <23>;
+ };
- mailboxes_ick: mailboxes_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <7>;
+ mailboxes_ick: clock-mailboxes-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mailboxes_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <7>;
+ };
+
+ sad2d_ick: clock-sad2d-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sad2d_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <3>;
+ };
};
ssi_l4_ick: ssi_l4_ick {
@@ -126,20 +156,27 @@
clock-div = <1>;
};
- sr1_fck: sr1_fck@c00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&sys_ck>;
- reg = <0x0c00>;
- ti,bit-shift = <6>;
- };
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- sr2_fck: sr2_fck@c00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&sys_ck>;
- reg = <0x0c00>;
- ti,bit-shift = <7>;
+ sr1_fck: clock-sr1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sr1_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ sr2_fck: clock-sr2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sr2_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
};
sr_l4_ick: sr_l4_ick {
@@ -187,37 +224,45 @@
ti,bit-shift = <0>;
};
- modem_fck: modem_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&sys_ck>;
- reg = <0x0a00>;
- ti,bit-shift = <31>;
- };
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- sad2d_ick: sad2d_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <3>;
- };
+ modem_fck: clock-modem-fck {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "modem_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <31>;
+ };
- mad2d_ick: mad2d_ick@a18 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&l3_ick>;
- reg = <0x0a18>;
- ti,bit-shift = <3>;
+ mspro_fck: clock-mspro-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mspro_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <23>;
+ };
};
- mspro_fck: mspro_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <23>;
+ /* CM_ICLKEN3_CORE */
+ clock@a18 {
+ compatible = "ti,clksel";
+ reg = <0xa18>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mad2d_ick: clock-mad2d-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mad2d_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <3>;
+ };
};
+
};
&cm_clockdomains {
diff --git a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
index 9974d5226971..dcc5cfcd1fe6 100644
--- a/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi
@@ -133,37 +133,66 @@
ti,bit-shift = <2>;
};
- usbtll_ick: usbtll_ick@a18 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a18>;
- ti,bit-shift = <2>;
+ /* CM_ICLKEN3_CORE */
+ clock@a18 {
+ compatible = "ti,clksel";
+ reg = <0xa18>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usbtll_ick: clock-usbtll-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "usbtll_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <2>;
+ };
};
- mmchs3_ick: mmchs3_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <30>;
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mmchs3_ick: clock-mmchs3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <30>;
+ };
};
- mmchs3_fck: mmchs3_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <30>;
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mmchs3_fck: clock-mmchs3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs3_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <30>;
+ };
};
- dss1_alwon_fck: dss1_alwon_fck_3430es2@e00 {
- #clock-cells = <0>;
- compatible = "ti,dss-gate-clock";
- clocks = <&dpll4_m4x2_ck>;
- ti,bit-shift = <0>;
- reg = <0x0e00>;
- ti,set-rate-parent;
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss1_alwon_fck: clock-dss1-alwon-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,dss-gate-clock";
+ clock-output-names = "dss1_alwon_fck_3430es2";
+ clocks = <&dpll4_m4x2_ck>;
+ ti,bit-shift = <0>;
+ ti,set-rate-parent;
+ };
};
dss_ick: dss_ick_3430es2@e10 {
diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi
index 4e9cc9003594..c5fdb2bd765d 100644
--- a/arch/arm/boot/dts/omap36xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi
@@ -58,12 +58,19 @@
ti,set-bit-to-disable;
};
- uart4_fck: uart4_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&per_48m_fck>;
+ clock@1000 {
+ compatible = "ti,clksel";
reg = <0x1000>;
- ti,bit-shift = <18>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ uart4_fck: clock-uart4-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart4_fck";
+ clocks = <&per_48m_fck>;
+ ti,bit-shift = <18>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
index 945537aee3ca..c94eb86d3da7 100644
--- a/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
+++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi
@@ -5,21 +5,35 @@
* Copyright (C) 2013 Texas Instruments, Inc.
*/
&cm_clocks {
- ssi_ssr_gate_fck_3430es2: ssi_ssr_gate_fck_3430es2@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&corex2_fck>;
- ti,bit-shift = <0>;
- reg = <0x0a00>;
- };
-
- ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@a40 {
- #clock-cells = <0>;
- compatible = "ti,composite-divider-clock";
- clocks = <&corex2_fck>;
- ti,bit-shift = <8>;
- reg = <0x0a40>;
- ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_gate_fck_3430es2: clock-ssi-ssr-gate-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "ssi_ssr_gate_fck_3430es2";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <0>;
+ };
+ };
+
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ ssi_ssr_div_fck_3430es2: clock-ssi-ssr-div-fck-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,composite-divider-clock";
+ clock-output-names = "ssi_ssr_div_fck_3430es2";
+ clocks = <&corex2_fck>;
+ ti,bit-shift = <8>;
+ ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>;
+ };
};
ssi_ssr_fck: ssi_ssr_fck_3430es2 {
@@ -36,12 +50,27 @@
clock-div = <2>;
};
- hsotgusb_ick_3430es2: hsotgusb_ick_3430es2@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-hsotgusb-interface-clock";
- clocks = <&core_l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <4>;
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ hsotgusb_ick_3430es2: clock-hsotgusb-ick-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-hsotgusb-interface-clock";
+ clock-output-names = "hsotgusb_ick_3430es2";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ ssi_ick: clock-ssi-ick-3430es2 {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-ssi-interface-clock";
+ clock-output-names = "ssi_ick_3430es2";
+ clocks = <&ssi_l4_ick>;
+ ti,bit-shift = <0>;
+ };
};
ssi_l4_ick: ssi_l4_ick {
@@ -52,20 +81,19 @@
clock-div = <1>;
};
- ssi_ick: ssi_ick_3430es2@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-ssi-interface-clock";
- clocks = <&ssi_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <0>;
- };
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
- usim_gate_fck: usim_gate_fck@c00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&omap_96m_fck>;
- ti,bit-shift = <9>;
- reg = <0x0c00>;
+ usim_gate_fck: clock-usim-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "usim_gate_fck";
+ clocks = <&omap_96m_fck>;
+ ti,bit-shift = <9>;
+ };
};
sys_d2_ck: sys_d2_ck {
@@ -140,13 +168,20 @@
clock-div = <20>;
};
- usim_mux_fck: usim_mux_fck@c40 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
- ti,bit-shift = <3>;
- reg = <0x0c40>;
- ti,index-starts-at-one;
+ clock@c40 {
+ compatible = "ti,clksel";
+ reg = <0xc40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usim_mux_fck: clock-usim-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "usim_mux_fck";
+ clocks = <&sys_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>, <&dpll5_m2_d20_ck>;
+ ti,bit-shift = <3>;
+ ti,index-starts-at-one;
+ };
};
usim_fck: usim_fck {
@@ -155,12 +190,19 @@
clocks = <&usim_gate_fck>, <&usim_mux_fck>;
};
- usim_ick: usim_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <9>;
+ clock@c10 {
+ compatible = "ti,clksel";
+ reg = <0xc10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ usim_ick: clock-usim-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "usim_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <9>;
+ };
};
};
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index 0656c32439d2..2e13ca11ceea 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -78,12 +78,35 @@
};
&scm_clocks {
- mcbsp5_mux_fck: mcbsp5_mux_fck@68 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <4>;
+ /* CONTROL_DEVCONF1 */
+ clock@68 {
+ compatible = "ti,clksel";
reg = <0x68>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mcbsp5_mux_fck: clock-mcbsp5-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp5_mux_fck";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <4>;
+ };
+
+ mcbsp3_mux_fck: clock-mcbsp3-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp3_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ };
+
+ mcbsp4_mux_fck: clock-mcbsp4-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp4_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
};
mcbsp5_fck: mcbsp5_fck {
@@ -92,12 +115,28 @@
clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>;
};
- mcbsp1_mux_fck: mcbsp1_mux_fck@4 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
- reg = <0x04>;
+ /* CONTROL_DEVCONF0 */
+ clock@4 {
+ compatible = "ti,clksel";
+ reg = <0x4>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ mcbsp1_mux_fck: clock-mcbsp1-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp1_mux_fck";
+ clocks = <&core_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
+
+ mcbsp2_mux_fck: clock-mcbsp2-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "mcbsp2_mux_fck";
+ clocks = <&per_96m_fck>, <&mcbsp_clks>;
+ ti,bit-shift = <6>;
+ };
};
mcbsp1_fck: mcbsp1_fck {
@@ -106,41 +145,18 @@
clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>;
};
- mcbsp2_mux_fck: mcbsp2_mux_fck@4 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&per_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <6>;
- reg = <0x04>;
- };
-
mcbsp2_fck: mcbsp2_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>;
};
- mcbsp3_mux_fck: mcbsp3_mux_fck@68 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&per_96m_fck>, <&mcbsp_clks>;
- reg = <0x68>;
- };
-
mcbsp3_fck: mcbsp3_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>;
};
- mcbsp4_mux_fck: mcbsp4_mux_fck@68 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&per_96m_fck>, <&mcbsp_clks>;
- ti,bit-shift = <2>;
- reg = <0x68>;
- };
-
mcbsp4_fck: mcbsp4_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
@@ -238,14 +254,87 @@
reg = <0x0d00>, <0x0d20>, <0x0d40>, <0x0d30>;
};
- dpll3_m3_ck: dpll3_m3_ck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll3_ck>;
- ti,bit-shift = <16>;
- ti,max-div = <31>;
+ /* CM_CLKSEL1_EMU */
+ clock@1140 {
+ compatible = "ti,clksel";
reg = <0x1140>;
- ti,index-starts-at-one;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll3_m3_ck: clock-dpll3-m3 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll3_m3_ck";
+ clocks = <&dpll3_ck>;
+ ti,bit-shift = <16>;
+ ti,max-div = <31>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m6_ck: clock-dpll4-m6 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m6_ck";
+ clocks = <&dpll4_ck>;
+ ti,bit-shift = <24>;
+ ti,max-div = <63>;
+ ti,index-starts-at-one;
+ };
+
+ emu_src_mux_ck: clock-emu-src-mux {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "emu_src_mux_ck";
+ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+ };
+
+ pclk_fck: clock-pclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pclk_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <7>;
+ ti,index-starts-at-one;
+ };
+
+ pclkx2_fck: clock-pclkx2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "pclkx2_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <6>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ atclk_fck: clock-atclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "atclk_fck";
+ clocks = <&emu_src_ck>;
+ ti,bit-shift = <4>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ traceclk_src_fck: clock-traceclk-src-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "traceclk_src_fck";
+ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
+ ti,bit-shift = <2>;
+ };
+
+ traceclk_fck: clock-traceclk-fck {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "traceclk_fck";
+ clocks = <&traceclk_src_fck>;
+ ti,bit-shift = <11>;
+ ti,max-div = <7>;
+ ti,index-starts-at-one;
+ };
};
dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck {
@@ -285,16 +374,6 @@
clock-frequency = <0x0>;
};
- dpll3_m2_ck: dpll3_m2_ck@d40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll3_ck>;
- ti,bit-shift = <27>;
- ti,max-div = <31>;
- reg = <0x0d40>;
- ti,index-starts-at-one;
- };
-
core_ck: core_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -345,22 +424,73 @@
clock-div = <1>;
};
- omap_96m_fck: omap_96m_fck@d40 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&cm_96m_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
- reg = <0x0d40>;
- };
-
- dpll4_m3_ck: dpll4_m3_ck@e40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll4_ck>;
- ti,bit-shift = <8>;
- ti,max-div = <32>;
- reg = <0x0e40>;
- ti,index-starts-at-one;
+ /* CM_CLKSEL1_PLL */
+ clock@d40 {
+ compatible = "ti,clksel";
+ reg = <0xd40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll3_m2_ck: clock-dpll3-m2 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll3_m2_ck";
+ clocks = <&dpll3_ck>;
+ ti,bit-shift = <27>;
+ ti,max-div = <31>;
+ ti,index-starts-at-one;
+ };
+
+ omap_96m_fck: clock-omap-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_96m_fck";
+ clocks = <&cm_96m_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ omap_54m_fck: clock-omap-54m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_54m_fck";
+ clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
+ ti,bit-shift = <5>;
+ };
+
+ omap_48m_fck: clock-omap-48m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clock-output-names = "omap_48m_fck";
+ clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
+ ti,bit-shift = <3>;
+ };
+ };
+
+ /* CM_CLKSEL_DSS */
+ clock@e40 {
+ compatible = "ti,clksel";
+ reg = <0xe40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dpll4_m3_ck: clock-dpll4-m3 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m3_ck";
+ clocks = <&dpll4_ck>;
+ ti,bit-shift = <8>;
+ ti,max-div = <32>;
+ ti,index-starts-at-one;
+ };
+
+ dpll4_m4_ck: clock-dpll4-m4 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "dpll4_m4_ck";
+ clocks = <&dpll4_ck>;
+ ti,max-div = <16>;
+ ti,index-starts-at-one;
+ };
};
dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck {
@@ -380,14 +510,6 @@
ti,set-bit-to-disable;
};
- omap_54m_fck: omap_54m_fck@d40 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&dpll4_m3x2_ck>, <&sys_altclk>;
- ti,bit-shift = <5>;
- reg = <0x0d40>;
- };
-
cm_96m_d2_fck: cm_96m_d2_fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -396,14 +518,6 @@
clock-div = <2>;
};
- omap_48m_fck: omap_48m_fck@d40 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&cm_96m_d2_fck>, <&sys_altclk>;
- ti,bit-shift = <3>;
- reg = <0x0d40>;
- };
-
omap_12m_fck: omap_12m_fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -412,15 +526,6 @@
clock-div = <4>;
};
- dpll4_m4_ck: dpll4_m4_ck@e40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll4_ck>;
- ti,max-div = <16>;
- reg = <0x0e40>;
- ti,index-starts-at-one;
- };
-
dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
@@ -468,16 +573,6 @@
ti,set-rate-parent;
};
- dpll4_m6_ck: dpll4_m6_ck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&dpll4_ck>;
- ti,bit-shift = <24>;
- ti,max-div = <63>;
- reg = <0x1140>;
- ti,index-starts-at-one;
- };
-
dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -503,19 +598,37 @@
clock-div = <1>;
};
- clkout2_src_gate_ck: clkout2_src_gate_ck@d70 {
- #clock-cells = <0>;
- compatible = "ti,composite-no-wait-gate-clock";
- clocks = <&core_ck>;
- ti,bit-shift = <7>;
- reg = <0x0d70>;
- };
-
- clkout2_src_mux_ck: clkout2_src_mux_ck@d70 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
- reg = <0x0d70>;
+ /* CM_CLKOUT_CTRL */
+ clock@d70 {
+ compatible = "ti,clksel";
+ reg = <0xd70>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ clkout2_src_gate_ck: clock-clkout2-src-gate {
+ #clock-cells = <0>;
+ compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "clkout2_src_gate_ck";
+ clocks = <&core_ck>;
+ ti,bit-shift = <7>;
+ };
+
+ clkout2_src_mux_ck: clock-clkout2-src-mux {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "clkout2_src_mux_ck";
+ clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>;
+ };
+
+ sys_clkout2: clock-sys-clkout2 {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "sys_clkout2";
+ clocks = <&clkout2_src_ck>;
+ ti,bit-shift = <3>;
+ ti,max-div = <64>;
+ ti,index-power-of-two;
+ };
};
clkout2_src_ck: clkout2_src_ck {
@@ -524,16 +637,6 @@
clocks = <&clkout2_src_gate_ck>, <&clkout2_src_mux_ck>;
};
- sys_clkout2: sys_clkout2@d70 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&clkout2_src_ck>;
- ti,bit-shift = <3>;
- ti,max-div = <64>;
- reg = <0x0d70>;
- ti,index-power-of-two;
- };
-
mpu_ck: mpu_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -558,49 +661,208 @@
clock-div = <1>;
};
- l3_ick: l3_ick@a40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&core_ck>;
- ti,max-div = <3>;
- reg = <0x0a40>;
- ti,index-starts-at-one;
- };
-
- l4_ick: l4_ick@a40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&l3_ick>;
- ti,bit-shift = <2>;
- ti,max-div = <3>;
- reg = <0x0a40>;
- ti,index-starts-at-one;
- };
-
- rm_ick: rm_ick@c40 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&l4_ick>;
- ti,bit-shift = <1>;
- ti,max-div = <3>;
- reg = <0x0c40>;
- ti,index-starts-at-one;
- };
-
- gpt10_gate_fck: gpt10_gate_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <11>;
- reg = <0x0a00>;
- };
-
- gpt10_mux_fck: gpt10_mux_fck@a40 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
- reg = <0x0a40>;
+ /* CM_CLKSEL_CORE */
+ clock@a40 {
+ compatible = "ti,clksel";
+ reg = <0xa40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ l3_ick: clock-l3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l3_ick";
+ clocks = <&core_ck>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ l4_ick: clock-l4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "l4_ick";
+ clocks = <&l3_ick>;
+ ti,bit-shift = <2>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ gpt10_mux_fck: clock-gpt10-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt10_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt11_mux_fck: clock-gpt11-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt11_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+ };
+
+ /* CM_CLKSEL_WKUP */
+ clock@c40 {
+ compatible = "ti,clksel";
+ reg = <0xc40>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ rm_ick: clock-rm-ick {
+ #clock-cells = <0>;
+ compatible = "ti,divider-clock";
+ clock-output-names = "rm_ick";
+ clocks = <&l4_ick>;
+ ti,bit-shift = <1>;
+ ti,max-div = <3>;
+ ti,index-starts-at-one;
+ };
+
+ gpt1_mux_fck: clock-gpt1-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt1_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ };
+ };
+
+ /* CM_FCLKEN1_CORE */
+ clock@a00 {
+ compatible = "ti,clksel";
+ reg = <0xa00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt10_gate_fck: clock-gpt10-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt10_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <11>;
+ };
+
+ gpt11_gate_fck: clock-gpt11-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt11_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <12>;
+ };
+
+ mmchs2_fck: clock-mmchs2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs2_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <25>;
+ };
+
+ mmchs1_fck: clock-mmchs1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mmchs1_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <24>;
+ };
+
+ i2c3_fck: clock-i2c3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c3_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <17>;
+ };
+
+ i2c2_fck: clock-i2c2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c2_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <16>;
+ };
+
+ i2c1_fck: clock-i2c1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "i2c1_fck";
+ clocks = <&core_96m_fck>;
+ ti,bit-shift = <15>;
+ };
+
+ mcbsp5_gate_fck: clock-mcbsp5-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp5_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <10>;
+ };
+
+ mcbsp1_gate_fck: clock-mcbsp1-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp1_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <9>;
+ };
+
+ mcspi4_fck: clock-mcspi4-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi4_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <21>;
+ };
+
+ mcspi3_fck: clock-mcspi3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi3_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <20>;
+ };
+
+ mcspi2_fck: clock-mcspi2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi2_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <19>;
+ };
+
+ mcspi1_fck: clock-mcspi1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "mcspi1_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <18>;
+ };
+
+ uart2_fck: clock-uart2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart2_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <14>;
+ };
+
+ uart1_fck: clock-uart1-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart1_fck";
+ clocks = <&core_48m_fck>;
+ ti,bit-shift = <13>;
+ };
+
+ hdq_fck: clock-hdq-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "hdq_fck";
+ clocks = <&core_12m_fck>;
+ ti,bit-shift = <22>;
+ };
};
gpt10_fck: gpt10_fck {
@@ -609,22 +871,6 @@
clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>;
};
- gpt11_gate_fck: gpt11_gate_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <12>;
- reg = <0x0a00>;
- };
-
- gpt11_mux_fck: gpt11_mux_fck@a40 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <7>;
- reg = <0x0a40>;
- };
-
gpt11_fck: gpt11_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
@@ -639,62 +885,6 @@
clock-div = <1>;
};
- mmchs2_fck: mmchs2_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <25>;
- };
-
- mmchs1_fck: mmchs1_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <24>;
- };
-
- i2c3_fck: i2c3_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <17>;
- };
-
- i2c2_fck: i2c2_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <16>;
- };
-
- i2c1_fck: i2c1_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_96m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <15>;
- };
-
- mcbsp5_gate_fck: mcbsp5_gate_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <10>;
- reg = <0x0a00>;
- };
-
- mcbsp1_gate_fck: mcbsp1_gate_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <9>;
- reg = <0x0a00>;
- };
-
core_48m_fck: core_48m_fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -703,54 +893,6 @@
clock-div = <1>;
};
- mcspi4_fck: mcspi4_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <21>;
- };
-
- mcspi3_fck: mcspi3_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <20>;
- };
-
- mcspi2_fck: mcspi2_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <19>;
- };
-
- mcspi1_fck: mcspi1_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <18>;
- };
-
- uart2_fck: uart2_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <14>;
- };
-
- uart1_fck: uart1_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_48m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <13>;
- };
-
core_12m_fck: core_12m_fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -759,14 +901,6 @@
clock-div = <1>;
};
- hdq_fck: hdq_fck@a00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_12m_fck>;
- reg = <0x0a00>;
- ti,bit-shift = <22>;
- };
-
core_l3_ick: core_l3_ick {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -775,12 +909,172 @@
clock-div = <1>;
};
- sdrc_ick: sdrc_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&core_l3_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <1>;
+ /* CM_ICLKEN1_CORE */
+ clock@a10 {
+ compatible = "ti,clksel";
+ reg = <0xa10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ sdrc_ick: clock-sdrc-ick {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "sdrc_ick";
+ clocks = <&core_l3_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ mmchs2_ick: clock-mmchs2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <25>;
+ };
+
+ mmchs1_ick: clock-mmchs1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mmchs1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <24>;
+ };
+
+ hdq_ick: clock-hdq-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "hdq_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <22>;
+ };
+
+ mcspi4_ick: clock-mcspi4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi4_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <21>;
+ };
+
+ mcspi3_ick: clock-mcspi3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <20>;
+ };
+
+ mcspi2_ick: clock-mcspi2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <19>;
+ };
+
+ mcspi1_ick: clock-mcspi1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcspi1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <18>;
+ };
+
+ i2c3_ick: clock-i2c3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c3_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <17>;
+ };
+
+ i2c2_ick: clock-i2c2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <16>;
+ };
+
+ i2c1_ick: clock-i2c1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "i2c1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <15>;
+ };
+
+ uart2_ick: clock-uart2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <14>;
+ };
+
+ uart1_ick: clock-uart1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <13>;
+ };
+
+ gpt11_ick: clock-gpt11-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt11_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <12>;
+ };
+
+ gpt10_ick: clock-gpt10-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt10_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <11>;
+ };
+
+ mcbsp5_ick: clock-mcbsp5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp5_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <10>;
+ };
+
+ mcbsp1_ick: clock-mcbsp1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp1_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <9>;
+ };
+
+ omapctrl_ick: clock-omapctrl-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "omapctrl_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <6>;
+ };
+
+ aes2_ick: clock-aes2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "aes2_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <28>;
+ };
+
+ sha12_ick: clock-sha12-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "sha12_ick";
+ clocks = <&core_l4_ick>;
+ ti,bit-shift = <27>;
+ };
};
gpmc_fck: gpmc_fck {
@@ -799,164 +1093,36 @@
clock-div = <1>;
};
- mmchs2_ick: mmchs2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <25>;
- };
-
- mmchs1_ick: mmchs1_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <24>;
- };
-
- hdq_ick: hdq_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <22>;
- };
-
- mcspi4_ick: mcspi4_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <21>;
- };
-
- mcspi3_ick: mcspi3_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <20>;
- };
-
- mcspi2_ick: mcspi2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <19>;
- };
-
- mcspi1_ick: mcspi1_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <18>;
- };
-
- i2c3_ick: i2c3_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <17>;
- };
-
- i2c2_ick: i2c2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <16>;
- };
-
- i2c1_ick: i2c1_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <15>;
- };
-
- uart2_ick: uart2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <14>;
- };
-
- uart1_ick: uart1_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <13>;
- };
-
- gpt11_ick: gpt11_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <12>;
- };
-
- gpt10_ick: gpt10_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <11>;
- };
-
- mcbsp5_ick: mcbsp5_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <10>;
- };
-
- mcbsp1_ick: mcbsp1_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <9>;
- };
-
- omapctrl_ick: omapctrl_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <6>;
- };
-
- dss_tv_fck: dss_tv_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&omap_54m_fck>;
- reg = <0x0e00>;
- ti,bit-shift = <2>;
- };
-
- dss_96m_fck: dss_96m_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&omap_96m_fck>;
- reg = <0x0e00>;
- ti,bit-shift = <2>;
- };
-
- dss2_alwon_fck: dss2_alwon_fck@e00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&sys_ck>;
- reg = <0x0e00>;
- ti,bit-shift = <1>;
+ /* CM_FCLKEN_DSS */
+ clock@e00 {
+ compatible = "ti,clksel";
+ reg = <0xe00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ dss_tv_fck: clock-dss-tv-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_tv_fck";
+ clocks = <&omap_54m_fck>;
+ ti,bit-shift = <2>;
+ };
+
+ dss_96m_fck: clock-dss-96m-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss_96m_fck";
+ clocks = <&omap_96m_fck>;
+ ti,bit-shift = <2>;
+ };
+
+ dss2_alwon_fck: clock-dss2-alwon-fck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "dss2_alwon_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <1>;
+ };
};
dummy_ck: dummy_ck {
@@ -965,19 +1131,36 @@
clock-frequency = <0>;
};
- gpt1_gate_fck: gpt1_gate_fck@c00 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <0>;
- reg = <0x0c00>;
- };
-
- gpt1_mux_fck: gpt1_mux_fck@c40 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- reg = <0x0c40>;
+ /* CM_FCLKEN_WKUP */
+ clock@c00 {
+ compatible = "ti,clksel";
+ reg = <0xc00>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt1_gate_fck: clock-gpt1-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt1_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <0>;
+ };
+
+ gpio1_dbck: clock-gpio1-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio1_dbck";
+ clocks = <&wkup_32k_fck>;
+ ti,bit-shift = <3>;
+ };
+
+ wdt2_fck: clock-wdt2-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "wdt2_fck";
+ clocks = <&wkup_32k_fck>;
+ ti,bit-shift = <5>;
+ };
};
gpt1_fck: gpt1_fck {
@@ -986,14 +1169,6 @@
clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>;
};
- aes2_ick: aes2_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- ti,bit-shift = <28>;
- reg = <0x0a10>;
- };
-
wkup_32k_fck: wkup_32k_fck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -1002,76 +1177,60 @@
clock-div = <1>;
};
- gpio1_dbck: gpio1_dbck@c00 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&wkup_32k_fck>;
- reg = <0x0c00>;
- ti,bit-shift = <3>;
- };
-
- sha12_ick: sha12_ick@a10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&core_l4_ick>;
- reg = <0x0a10>;
- ti,bit-shift = <27>;
- };
-
- wdt2_fck: wdt2_fck@c00 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&wkup_32k_fck>;
- reg = <0x0c00>;
- ti,bit-shift = <5>;
- };
-
- wdt2_ick: wdt2_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <5>;
- };
-
- wdt1_ick: wdt1_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <4>;
- };
-
- gpio1_ick: gpio1_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <3>;
- };
-
- omap_32ksync_ick: omap_32ksync_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <2>;
- };
-
- gpt12_ick: gpt12_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <1>;
- };
-
- gpt1_ick: gpt1_ick@c10 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&wkup_l4_ick>;
- reg = <0x0c10>;
- ti,bit-shift = <0>;
+ /* CM_ICLKEN_WKUP */
+ clock@c10 {
+ compatible = "ti,clksel";
+ reg = <0xc10>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ wdt2_ick: clock-wdt2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt2_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <5>;
+ };
+
+ wdt1_ick: clock-wdt1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ gpio1_ick: clock-gpio1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <3>;
+ };
+
+ omap_32ksync_ick: clock-omap-32ksync-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "omap_32ksync_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <2>;
+ };
+
+ gpt12_ick: clock-gpt12-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt12_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ gpt1_ick: clock-gpt1-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt1_ick";
+ clocks = <&wkup_l4_ick>;
+ ti,bit-shift = <0>;
+ };
};
per_96m_fck: per_96m_fck {
@@ -1090,27 +1249,227 @@
clock-div = <1>;
};
- uart3_fck: uart3_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&per_48m_fck>;
- reg = <0x1000>;
- ti,bit-shift = <11>;
- };
-
- gpt2_gate_fck: gpt2_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <3>;
+ /* CM_FCLKEN_PER */
+ clock@1000 {
+ compatible = "ti,clksel";
reg = <0x1000>;
- };
-
- gpt2_mux_fck: gpt2_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ uart3_fck: clock-uart3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "uart3_fck";
+ clocks = <&per_48m_fck>;
+ ti,bit-shift = <11>;
+ };
+
+ gpt2_gate_fck: clock-gpt2-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt2_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ gpt3_gate_fck: clock-gpt3-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt3_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt4_gate_fck: clock-gpt4-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt4_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt5_gate_fck: clock-gpt5-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt5_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt6_gate_fck: clock-gpt6-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt6_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
+
+ gpt7_gate_fck: clock-gpt7-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt7_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <8>;
+ };
+
+ gpt8_gate_fck: clock-gpt8-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt8_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <9>;
+ };
+
+ gpt9_gate_fck: clock-gpt9-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "gpt9_gate_fck";
+ clocks = <&sys_ck>;
+ ti,bit-shift = <10>;
+ };
+
+ gpio6_dbck: clock-gpio6-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio6_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <17>;
+ };
+
+ gpio5_dbck: clock-gpio5-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio5_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <16>;
+ };
+
+ gpio4_dbck: clock-gpio4-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio4_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <15>;
+ };
+
+ gpio3_dbck: clock-gpio3-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio3_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <14>;
+ };
+
+ gpio2_dbck: clock-gpio2-dbck {
+ #clock-cells = <0>;
+ compatible = "ti,gate-clock";
+ clock-output-names = "gpio2_dbck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <13>;
+ };
+
+ wdt3_fck: clock-wdt3-fck {
+ #clock-cells = <0>;
+ compatible = "ti,wait-gate-clock";
+ clock-output-names = "wdt3_fck";
+ clocks = <&per_32k_alwon_fck>;
+ ti,bit-shift = <12>;
+ };
+
+ mcbsp2_gate_fck: clock-mcbsp2-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp2_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <0>;
+ };
+
+ mcbsp3_gate_fck: clock-mcbsp3-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp3_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <1>;
+ };
+
+ mcbsp4_gate_fck: clock-mcbsp4-gate-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-gate-clock";
+ clock-output-names = "mcbsp4_gate_fck";
+ clocks = <&mcbsp_clks>;
+ ti,bit-shift = <2>;
+ };
+ };
+
+ /* CM_CLKSEL_PER */
+ clock@1040 {
+ compatible = "ti,clksel";
reg = <0x1040>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpt2_mux_fck: clock-gpt2-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt2_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ };
+
+ gpt3_mux_fck: clock-gpt3-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt3_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <1>;
+ };
+
+ gpt4_mux_fck: clock-gpt4-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt4_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <2>;
+ };
+
+ gpt5_mux_fck: clock-gpt5-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt5_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <3>;
+ };
+
+ gpt6_mux_fck: clock-gpt6-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt6_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt7_mux_fck: clock-gpt7-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt7_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt8_mux_fck: clock-gpt8-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt8_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt9_mux_fck: clock-gpt9-mux-fck {
+ #clock-cells = <0>;
+ compatible = "ti,composite-mux-clock";
+ clock-output-names = "gpt9_mux_fck";
+ clocks = <&omap_32k_fck>, <&sys_ck>;
+ ti,bit-shift = <7>;
+ };
};
gpt2_fck: gpt2_fck {
@@ -1119,154 +1478,42 @@
clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>;
};
- gpt3_gate_fck: gpt3_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <4>;
- reg = <0x1000>;
- };
-
- gpt3_mux_fck: gpt3_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <1>;
- reg = <0x1040>;
- };
-
gpt3_fck: gpt3_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>;
};
- gpt4_gate_fck: gpt4_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <5>;
- reg = <0x1000>;
- };
-
- gpt4_mux_fck: gpt4_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <2>;
- reg = <0x1040>;
- };
-
gpt4_fck: gpt4_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>;
};
- gpt5_gate_fck: gpt5_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <6>;
- reg = <0x1000>;
- };
-
- gpt5_mux_fck: gpt5_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <3>;
- reg = <0x1040>;
- };
-
gpt5_fck: gpt5_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>;
};
- gpt6_gate_fck: gpt6_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <7>;
- reg = <0x1000>;
- };
-
- gpt6_mux_fck: gpt6_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <4>;
- reg = <0x1040>;
- };
-
gpt6_fck: gpt6_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>;
};
- gpt7_gate_fck: gpt7_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <8>;
- reg = <0x1000>;
- };
-
- gpt7_mux_fck: gpt7_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <5>;
- reg = <0x1040>;
- };
-
gpt7_fck: gpt7_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>;
};
- gpt8_gate_fck: gpt8_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <9>;
- reg = <0x1000>;
- };
-
- gpt8_mux_fck: gpt8_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <6>;
- reg = <0x1040>;
- };
-
gpt8_fck: gpt8_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>;
};
- gpt9_gate_fck: gpt9_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&sys_ck>;
- ti,bit-shift = <10>;
- reg = <0x1000>;
- };
-
- gpt9_mux_fck: gpt9_mux_fck@1040 {
- #clock-cells = <0>;
- compatible = "ti,composite-mux-clock";
- clocks = <&omap_32k_fck>, <&sys_ck>;
- ti,bit-shift = <7>;
- reg = <0x1040>;
- };
-
gpt9_fck: gpt9_fck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
@@ -1281,54 +1528,6 @@
clock-div = <1>;
};
- gpio6_dbck: gpio6_dbck@1000 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <17>;
- };
-
- gpio5_dbck: gpio5_dbck@1000 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <16>;
- };
-
- gpio4_dbck: gpio4_dbck@1000 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <15>;
- };
-
- gpio3_dbck: gpio3_dbck@1000 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <14>;
- };
-
- gpio2_dbck: gpio2_dbck@1000 {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <13>;
- };
-
- wdt3_fck: wdt3_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,wait-gate-clock";
- clocks = <&per_32k_alwon_fck>;
- reg = <0x1000>;
- ti,bit-shift = <12>;
- };
-
per_l4_ick: per_l4_ick {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
@@ -1337,187 +1536,164 @@
clock-div = <1>;
};
- gpio6_ick: gpio6_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <17>;
- };
-
- gpio5_ick: gpio5_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <16>;
- };
-
- gpio4_ick: gpio4_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <15>;
- };
-
- gpio3_ick: gpio3_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <14>;
- };
-
- gpio2_ick: gpio2_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <13>;
- };
-
- wdt3_ick: wdt3_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <12>;
- };
-
- uart3_ick: uart3_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <11>;
- };
-
- uart4_ick: uart4_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <18>;
- };
-
- gpt9_ick: gpt9_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <10>;
- };
-
- gpt8_ick: gpt8_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <9>;
- };
-
- gpt7_ick: gpt7_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <8>;
- };
-
- gpt6_ick: gpt6_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <7>;
- };
-
- gpt5_ick: gpt5_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <6>;
- };
-
- gpt4_ick: gpt4_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <5>;
- };
-
- gpt3_ick: gpt3_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <4>;
- };
-
- gpt2_ick: gpt2_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <3>;
- };
-
- mcbsp2_ick: mcbsp2_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <0>;
- };
-
- mcbsp3_ick: mcbsp3_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
- reg = <0x1010>;
- ti,bit-shift = <1>;
- };
-
- mcbsp4_ick: mcbsp4_ick@1010 {
- #clock-cells = <0>;
- compatible = "ti,omap3-interface-clock";
- clocks = <&per_l4_ick>;
+ /* CM_ICLKEN_PER */
+ clock@1010 {
+ compatible = "ti,clksel";
reg = <0x1010>;
- ti,bit-shift = <2>;
- };
-
- mcbsp2_gate_fck: mcbsp2_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <0>;
- reg = <0x1000>;
- };
-
- mcbsp3_gate_fck: mcbsp3_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <1>;
- reg = <0x1000>;
- };
-
- mcbsp4_gate_fck: mcbsp4_gate_fck@1000 {
- #clock-cells = <0>;
- compatible = "ti,composite-gate-clock";
- clocks = <&mcbsp_clks>;
- ti,bit-shift = <2>;
- reg = <0x1000>;
- };
-
- emu_src_mux_ck: emu_src_mux_ck@1140 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
- reg = <0x1140>;
+ #clock-cells = <2>;
+ #address-cells = <0>;
+
+ gpio6_ick: clock-gpio6-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio6_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <17>;
+ };
+
+ gpio5_ick: clock-gpio5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio5_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <16>;
+ };
+
+ gpio4_ick: clock-gpio4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <15>;
+ };
+
+ gpio3_ick: clock-gpio3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <14>;
+ };
+
+ gpio2_ick: clock-gpio2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpio2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <13>;
+ };
+
+ wdt3_ick: clock-wdt3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "wdt3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <12>;
+ };
+
+ uart3_ick: clock-uart3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <11>;
+ };
+
+ uart4_ick: clock-uart4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "uart4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <18>;
+ };
+
+ gpt9_ick: clock-gpt9-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt9_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <10>;
+ };
+
+ gpt8_ick: clock-gpt8-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt8_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <9>;
+ };
+
+ gpt7_ick: clock-gpt7-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt7_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <8>;
+ };
+
+ gpt6_ick: clock-gpt6-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt6_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <7>;
+ };
+
+ gpt5_ick: clock-gpt5-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt5_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <6>;
+ };
+
+ gpt4_ick: clock-gpt4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <5>;
+ };
+
+ gpt3_ick: clock-gpt3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <4>;
+ };
+
+ gpt2_ick: clock-gpt2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "gpt2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <3>;
+ };
+
+ mcbsp2_ick: clock-mcbsp2-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp2_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <0>;
+ };
+
+ mcbsp3_ick: clock-mcbsp3-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp3_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <1>;
+ };
+
+ mcbsp4_ick: clock-mcbsp4-ick {
+ #clock-cells = <0>;
+ compatible = "ti,omap3-interface-clock";
+ clock-output-names = "mcbsp4_ick";
+ clocks = <&per_l4_ick>;
+ ti,bit-shift = <2>;
+ };
};
emu_src_ck: emu_src_ck {
@@ -1526,54 +1702,6 @@
clocks = <&emu_src_mux_ck>;
};
- pclk_fck: pclk_fck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&emu_src_ck>;
- ti,bit-shift = <8>;
- ti,max-div = <7>;
- reg = <0x1140>;
- ti,index-starts-at-one;
- };
-
- pclkx2_fck: pclkx2_fck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&emu_src_ck>;
- ti,bit-shift = <6>;
- ti,max-div = <3>;
- reg = <0x1140>;
- ti,index-starts-at-one;
- };
-
- atclk_fck: atclk_fck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&emu_src_ck>;
- ti,bit-shift = <4>;
- ti,max-div = <3>;
- reg = <0x1140>;
- ti,index-starts-at-one;
- };
-
- traceclk_src_fck: traceclk_src_fck@1140 {
- #clock-cells = <0>;
- compatible = "ti,mux-clock";
- clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>;
- ti,bit-shift = <2>;
- reg = <0x1140>;
- };
-
- traceclk_fck: traceclk_fck@1140 {
- #clock-cells = <0>;
- compatible = "ti,divider-clock";
- clocks = <&traceclk_src_fck>;
- ti,bit-shift = <11>;
- ti,max-div = <7>;
- reg = <0x1140>;
- ti,index-starts-at-one;
- };
-
secure_32k_fck: secure_32k_fck {
#clock-cells = <0>;
compatible = "fixed-clock";
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 609a8dea946b..518652a599bd 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -558,7 +558,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@1 {
+ ethernet: ethernet@1 {
compatible = "usb424,ec00";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/omap443x-clocks.dtsi b/arch/arm/boot/dts/omap443x-clocks.dtsi
index 39297868ec85..581e088231b5 100644
--- a/arch/arm/boot/dts/omap443x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap443x-clocks.dtsi
@@ -8,6 +8,7 @@
bandgap_fclk: bandgap_fclk@1888 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "bandgap_fclk";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap446x-clocks.dtsi b/arch/arm/boot/dts/omap446x-clocks.dtsi
index 0f41714cffbb..d9362fef6720 100644
--- a/arch/arm/boot/dts/omap446x-clocks.dtsi
+++ b/arch/arm/boot/dts/omap446x-clocks.dtsi
@@ -8,6 +8,7 @@
div_ts_ck: div_ts_ck@1888 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "div_ts_ck";
clocks = <&l4_wkup_clk_mux_ck>;
ti,bit-shift = <24>;
reg = <0x1888>;
@@ -17,6 +18,7 @@
bandgap_ts_fclk: bandgap_ts_fclk@1888 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "bandgap_ts_fclk";
clocks = <&div_ts_ck>;
ti,bit-shift = <8>;
reg = <0x1888>;
diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi
index 1f1c04d8f472..8df73d285638 100644
--- a/arch/arm/boot/dts/omap44xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi
@@ -8,18 +8,21 @@
extalt_clkin_ck: extalt_clkin_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "extalt_clkin_ck";
clock-frequency = <59000000>;
};
pad_clks_src_ck: pad_clks_src_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "pad_clks_src_ck";
clock-frequency = <12000000>;
};
pad_clks_ck: pad_clks_ck@108 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "pad_clks_ck";
clocks = <&pad_clks_src_ck>;
ti,bit-shift = <8>;
reg = <0x0108>;
@@ -28,24 +31,28 @@
pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "pad_slimbus_core_clks_ck";
clock-frequency = <12000000>;
};
secure_32k_clk_src_ck: secure_32k_clk_src_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
clock-frequency = <32768>;
};
slimbus_src_clk: slimbus_src_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "slimbus_src_clk";
clock-frequency = <12000000>;
};
slimbus_clk: slimbus_clk@108 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "slimbus_clk";
clocks = <&slimbus_src_clk>;
ti,bit-shift = <10>;
reg = <0x0108>;
@@ -54,84 +61,98 @@
sys_32k_ck: sys_32k_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "sys_32k_ck";
clock-frequency = <32768>;
};
virt_12000000_ck: virt_12000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
clock-frequency = <12000000>;
};
virt_13000000_ck: virt_13000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
clock-frequency = <13000000>;
};
virt_16800000_ck: virt_16800000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
clock-frequency = <16800000>;
};
virt_19200000_ck: virt_19200000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
clock-frequency = <19200000>;
};
virt_26000000_ck: virt_26000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
clock-frequency = <26000000>;
};
virt_27000000_ck: virt_27000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
clock-frequency = <27000000>;
};
virt_38400000_ck: virt_38400000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
clock-frequency = <38400000>;
};
tie_low_clock_ck: tie_low_clock_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "tie_low_clock_ck";
clock-frequency = <0>;
};
utmi_phy_clkout_ck: utmi_phy_clkout_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "utmi_phy_clkout_ck";
clock-frequency = <60000000>;
};
xclk60mhsp1_ck: xclk60mhsp1_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp1_ck";
clock-frequency = <60000000>;
};
xclk60mhsp2_ck: xclk60mhsp2_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp2_ck";
clock-frequency = <60000000>;
};
xclk60motg_ck: xclk60motg_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "xclk60motg_ck";
clock-frequency = <60000000>;
};
dpll_abe_ck: dpll_abe_ck@1e0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>;
reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
};
@@ -139,6 +160,7 @@
dpll_abe_x2_ck: dpll_abe_x2_ck@1f0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
clocks = <&dpll_abe_ck>;
reg = <0x01f0>;
};
@@ -146,6 +168,7 @@
dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -157,6 +180,7 @@
abe_24m_fclk: abe_24m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "abe_24m_fclk";
clocks = <&dpll_abe_m2x2_ck>;
clock-mult = <1>;
clock-div = <8>;
@@ -165,6 +189,7 @@
abe_clk: abe_clk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
clocks = <&dpll_abe_m2x2_ck>;
ti,max-div = <4>;
reg = <0x0108>;
@@ -175,6 +200,7 @@
dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -186,6 +212,7 @@
core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@12c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "core_hsd_byp_clk_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
@@ -194,6 +221,7 @@
dpll_core_ck: dpll_core_ck@120 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@@ -201,12 +229,14 @@
dpll_core_x2_ck: dpll_core_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
clocks = <&dpll_core_ck>;
};
dpll_core_m6x2_ck: dpll_core_m6x2_ck@140 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m6x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -218,6 +248,7 @@
dpll_core_m2_ck: dpll_core_m2_ck@130 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
clocks = <&dpll_core_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -229,6 +260,7 @@
ddrphy_ck: ddrphy_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "ddrphy_ck";
clocks = <&dpll_core_m2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -237,6 +269,7 @@
dpll_core_m5x2_ck: dpll_core_m5x2_ck@13c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m5x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -248,6 +281,7 @@
div_core_ck: div_core_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "div_core_ck";
clocks = <&dpll_core_m5x2_ck>;
reg = <0x0100>;
ti,max-div = <2>;
@@ -256,6 +290,7 @@
div_iva_hs_clk: div_iva_hs_clk@1dc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "div_iva_hs_clk";
clocks = <&dpll_core_m5x2_ck>;
ti,max-div = <4>;
reg = <0x01dc>;
@@ -265,6 +300,7 @@
div_mpu_hs_clk: div_mpu_hs_clk@19c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "div_mpu_hs_clk";
clocks = <&dpll_core_m5x2_ck>;
ti,max-div = <4>;
reg = <0x019c>;
@@ -274,6 +310,7 @@
dpll_core_m4x2_ck: dpll_core_m4x2_ck@138 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m4x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -285,6 +322,7 @@
dll_clk_div_ck: dll_clk_div_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dll_clk_div_ck";
clocks = <&dpll_core_m4x2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -293,6 +331,7 @@
dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2_ck";
clocks = <&dpll_abe_ck>;
ti,max-div = <31>;
reg = <0x01f0>;
@@ -302,6 +341,7 @@
dpll_core_m3x2_gate_ck: dpll_core_m3x2_gate_ck@134 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "dpll_core_m3x2_gate_ck";
clocks = <&dpll_core_x2_ck>;
ti,bit-shift = <8>;
reg = <0x0134>;
@@ -310,6 +350,7 @@
dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@134 {
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
+ clock-output-names = "dpll_core_m3x2_div_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
reg = <0x0134>;
@@ -319,12 +360,14 @@
dpll_core_m3x2_ck: dpll_core_m3x2_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "dpll_core_m3x2_ck";
clocks = <&dpll_core_m3x2_gate_ck>, <&dpll_core_m3x2_div_ck>;
};
dpll_core_m7x2_ck: dpll_core_m7x2_ck@144 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m7x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -336,6 +379,7 @@
iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@1ac {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "iva_hsd_byp_clk_mux_ck";
clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>;
ti,bit-shift = <23>;
reg = <0x01ac>;
@@ -344,6 +388,7 @@
dpll_iva_ck: dpll_iva_ck@1a0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
assigned-clocks = <&dpll_iva_ck>;
@@ -353,12 +398,14 @@
dpll_iva_x2_ck: dpll_iva_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_iva_x2_ck";
clocks = <&dpll_iva_ck>;
};
dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@1b8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m4x2_ck";
clocks = <&dpll_iva_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -372,6 +419,7 @@
dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@1bc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_m5x2_ck";
clocks = <&dpll_iva_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -385,6 +433,7 @@
dpll_mpu_ck: dpll_mpu_ck@160 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>;
reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
};
@@ -392,6 +441,7 @@
dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
clocks = <&dpll_mpu_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -403,6 +453,7 @@
per_hs_clk_div_ck: per_hs_clk_div_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "per_hs_clk_div_ck";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -411,6 +462,7 @@
usb_hs_clk_div_ck: usb_hs_clk_div_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "usb_hs_clk_div_ck";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <3>;
@@ -419,6 +471,7 @@
l3_div_ck: l3_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3_div_ck";
clocks = <&div_core_ck>;
ti,bit-shift = <4>;
ti,max-div = <2>;
@@ -428,6 +481,7 @@
l4_div_ck: l4_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l4_div_ck";
clocks = <&l3_div_ck>;
ti,bit-shift = <8>;
ti,max-div = <2>;
@@ -437,6 +491,7 @@
lp_clk_div_ck: lp_clk_div_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "lp_clk_div_ck";
clocks = <&dpll_abe_m2x2_ck>;
clock-mult = <1>;
clock-div = <16>;
@@ -445,6 +500,7 @@
mpu_periphclk: mpu_periphclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_periphclk";
clocks = <&dpll_mpu_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -453,6 +509,7 @@
ocp_abe_iclk: ocp_abe_iclk@528 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "ocp_abe_iclk";
clocks = <&abe_clkctrl OMAP4_AESS_CLKCTRL 24>;
ti,bit-shift = <24>;
reg = <0x0528>;
@@ -462,6 +519,7 @@
per_abe_24m_fclk: per_abe_24m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "per_abe_24m_fclk";
clocks = <&dpll_abe_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
@@ -470,6 +528,7 @@
dummy_ck: dummy_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
clock-frequency = <0>;
};
};
@@ -478,6 +537,7 @@
sys_clkin_ck: sys_clkin_ck@110 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin_ck";
clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
reg = <0x0110>;
ti,index-starts-at-one;
@@ -486,6 +546,7 @@
abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@108 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux_ck";
clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
ti,bit-shift = <24>;
reg = <0x0108>;
@@ -494,6 +555,7 @@
abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@10c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_refclk_mux_ck";
clocks = <&sys_clkin_ck>, <&sys_32k_ck>;
reg = <0x010c>;
};
@@ -501,6 +563,7 @@
dbgclk_mux_ck: dbgclk_mux_ck {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dbgclk_mux_ck";
clocks = <&sys_clkin_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -509,6 +572,7 @@
l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@108 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "l4_wkup_clk_mux_ck";
clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>;
reg = <0x0108>;
};
@@ -516,6 +580,7 @@
syc_clk_div_ck: syc_clk_div_ck@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "syc_clk_div_ck";
clocks = <&sys_clkin_ck>;
reg = <0x0100>;
ti,max-div = <2>;
@@ -524,6 +589,7 @@
usim_ck: usim_ck@1858 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "usim_ck";
clocks = <&dpll_per_m4x2_ck>;
ti,bit-shift = <24>;
reg = <0x1858>;
@@ -533,6 +599,7 @@
usim_fclk: usim_fclk@1858 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usim_fclk";
clocks = <&usim_ck>;
ti,bit-shift = <8>;
reg = <0x1858>;
@@ -541,6 +608,7 @@
trace_clk_div_ck: trace_clk_div_ck {
#clock-cells = <0>;
compatible = "ti,clkdm-gate-clock";
+ clock-output-names = "trace_clk_div_ck";
clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 24>;
};
};
@@ -548,6 +616,7 @@
&prm_clockdomains {
emu_sys_clkdm: emu_sys_clkdm {
compatible = "ti,clockdomain";
+ clock-output-names = "emu_sys_clkdm";
clocks = <&trace_clk_div_ck>;
};
};
@@ -556,6 +625,7 @@
per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@14c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "per_hsd_byp_clk_mux_ck";
clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>;
ti,bit-shift = <23>;
reg = <0x014c>;
@@ -564,6 +634,7 @@
dpll_per_ck: dpll_per_ck@140 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@@ -571,6 +642,7 @@
dpll_per_m2_ck: dpll_per_m2_ck@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
clocks = <&dpll_per_ck>;
ti,max-div = <31>;
reg = <0x0150>;
@@ -580,6 +652,7 @@
dpll_per_x2_ck: dpll_per_x2_ck@150 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
clocks = <&dpll_per_ck>;
reg = <0x0150>;
};
@@ -587,6 +660,7 @@
dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -598,6 +672,7 @@
dpll_per_m3x2_gate_ck: dpll_per_m3x2_gate_ck@154 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "dpll_per_m3x2_gate_ck";
clocks = <&dpll_per_x2_ck>;
ti,bit-shift = <8>;
reg = <0x0154>;
@@ -606,6 +681,7 @@
dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@154 {
#clock-cells = <0>;
compatible = "ti,composite-divider-clock";
+ clock-output-names = "dpll_per_m3x2_div_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
reg = <0x0154>;
@@ -615,12 +691,14 @@
dpll_per_m3x2_ck: dpll_per_m3x2_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "dpll_per_m3x2_ck";
clocks = <&dpll_per_m3x2_gate_ck>, <&dpll_per_m3x2_div_ck>;
};
dpll_per_m4x2_ck: dpll_per_m4x2_ck@158 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m4x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -632,6 +710,7 @@
dpll_per_m5x2_ck: dpll_per_m5x2_ck@15c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m5x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -643,6 +722,7 @@
dpll_per_m6x2_ck: dpll_per_m6x2_ck@160 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m6x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -654,6 +734,7 @@
dpll_per_m7x2_ck: dpll_per_m7x2_ck@164 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m7x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
ti,autoidle-shift = <8>;
@@ -665,6 +746,7 @@
dpll_usb_ck: dpll_usb_ck@180 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};
@@ -672,6 +754,7 @@
dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@1b4 {
#clock-cells = <0>;
compatible = "ti,fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo_ck";
clocks = <&dpll_usb_ck>;
ti,clock-div = <1>;
ti,autoidle-shift = <8>;
@@ -683,6 +766,7 @@
dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
clocks = <&dpll_usb_ck>;
ti,max-div = <127>;
ti,autoidle-shift = <8>;
@@ -694,6 +778,7 @@
ducati_clk_mux_ck: ducati_clk_mux_ck@100 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "ducati_clk_mux_ck";
clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>;
reg = <0x0100>;
};
@@ -701,6 +786,7 @@
func_12m_fclk: func_12m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <16>;
@@ -709,6 +795,7 @@
func_24m_clk: func_24m_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
@@ -717,6 +804,7 @@
func_24mc_fclk: func_24mc_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_24mc_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <8>;
@@ -725,6 +813,7 @@
func_48m_fclk: func_48m_fclk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "func_48m_fclk";
clocks = <&dpll_per_m2x2_ck>;
reg = <0x0108>;
ti,dividers = <4>, <8>;
@@ -733,6 +822,7 @@
func_48mc_fclk: func_48mc_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_48mc_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <4>;
@@ -741,6 +831,7 @@
func_64m_fclk: func_64m_fclk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "func_64m_fclk";
clocks = <&dpll_per_m4x2_ck>;
reg = <0x0108>;
ti,dividers = <2>, <4>;
@@ -749,6 +840,7 @@
func_96m_fclk: func_96m_fclk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "func_96m_fclk";
clocks = <&dpll_per_m2x2_ck>;
reg = <0x0108>;
ti,dividers = <2>, <4>;
@@ -757,6 +849,7 @@
init_60m_fclk: init_60m_fclk@104 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "init_60m_fclk";
clocks = <&dpll_usb_m2_ck>;
reg = <0x0104>;
ti,dividers = <1>, <8>;
@@ -765,6 +858,7 @@
per_abe_nc_fclk: per_abe_nc_fclk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "per_abe_nc_fclk";
clocks = <&dpll_abe_m2_ck>;
reg = <0x0108>;
ti,max-div = <2>;
@@ -773,6 +867,7 @@
usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy_cm_clk32k";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x0640>;
@@ -782,6 +877,7 @@
&cm2_clockdomains {
l3_init_clkdm: l3_init_clkdm {
compatible = "ti,clockdomain";
+ clock-output-names = "l3_init_clkdm";
clocks = <&dpll_usb_ck>;
};
};
@@ -790,6 +886,7 @@
auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk0_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0310>;
@@ -798,6 +895,7 @@
auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk0_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0310>;
@@ -806,12 +904,14 @@
auxclk0_src_ck: auxclk0_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk0_src_ck";
clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
};
auxclk0_ck: auxclk0_ck@310 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk0_ck";
clocks = <&auxclk0_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -821,6 +921,7 @@
auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk1_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0314>;
@@ -829,6 +930,7 @@
auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk1_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0314>;
@@ -837,12 +939,14 @@
auxclk1_src_ck: auxclk1_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk1_src_ck";
clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
};
auxclk1_ck: auxclk1_ck@314 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk1_ck";
clocks = <&auxclk1_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -852,6 +956,7 @@
auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk2_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0318>;
@@ -860,6 +965,7 @@
auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk2_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0318>;
@@ -868,12 +974,14 @@
auxclk2_src_ck: auxclk2_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk2_src_ck";
clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
};
auxclk2_ck: auxclk2_ck@318 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk2_ck";
clocks = <&auxclk2_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -883,6 +991,7 @@
auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk3_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x031c>;
@@ -891,6 +1000,7 @@
auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk3_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x031c>;
@@ -899,12 +1009,14 @@
auxclk3_src_ck: auxclk3_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk3_src_ck";
clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
};
auxclk3_ck: auxclk3_ck@31c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk3_ck";
clocks = <&auxclk3_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -914,6 +1026,7 @@
auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk4_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0320>;
@@ -922,6 +1035,7 @@
auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk4_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0320>;
@@ -930,12 +1044,14 @@
auxclk4_src_ck: auxclk4_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk4_src_ck";
clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
};
auxclk4_ck: auxclk4_ck@320 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk4_ck";
clocks = <&auxclk4_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -945,6 +1061,7 @@
auxclk5_src_gate_ck: auxclk5_src_gate_ck@324 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk5_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0324>;
@@ -953,6 +1070,7 @@
auxclk5_src_mux_ck: auxclk5_src_mux_ck@324 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk5_src_mux_ck";
clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0324>;
@@ -961,12 +1079,14 @@
auxclk5_src_ck: auxclk5_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk5_src_ck";
clocks = <&auxclk5_src_gate_ck>, <&auxclk5_src_mux_ck>;
};
auxclk5_ck: auxclk5_ck@324 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk5_ck";
clocks = <&auxclk5_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -976,6 +1096,7 @@
auxclkreq0_ck: auxclkreq0_ck@210 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq0_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x0210>;
@@ -984,6 +1105,7 @@
auxclkreq1_ck: auxclkreq1_ck@214 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq1_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x0214>;
@@ -992,6 +1114,7 @@
auxclkreq2_ck: auxclkreq2_ck@218 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq2_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x0218>;
@@ -1000,6 +1123,7 @@
auxclkreq3_ck: auxclkreq3_ck@21c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq3_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x021c>;
@@ -1008,6 +1132,7 @@
auxclkreq4_ck: auxclkreq4_ck@220 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq4_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x0220>;
@@ -1016,6 +1141,7 @@
auxclkreq5_ck: auxclkreq5_ck@224 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq5_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>;
ti,bit-shift = <2>;
reg = <0x0224>;
@@ -1025,6 +1151,7 @@
&cm1 {
mpuss_cm: mpuss_cm@300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "mpuss_cm";
reg = <0x300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1032,6 +1159,7 @@
mpuss_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "mpuss_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1039,6 +1167,7 @@
tesla_cm: tesla_cm@400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "tesla_cm";
reg = <0x400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1046,6 +1175,7 @@
tesla_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "tesla_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1053,6 +1183,7 @@
abe_cm: abe_cm@500 {
compatible = "ti,omap4-cm";
+ clock-output-names = "abe_cm";
reg = <0x500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1060,6 +1191,7 @@
abe_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "abe_clkctrl";
reg = <0x20 0x6c>;
#clock-cells = <2>;
};
@@ -1070,6 +1202,7 @@
&cm2 {
l4_ao_cm: l4_ao_cm@600 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_ao_cm";
reg = <0x600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1077,6 +1210,7 @@
l4_ao_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_ao_clkctrl";
reg = <0x20 0x1c>;
#clock-cells = <2>;
};
@@ -1084,6 +1218,7 @@
l3_1_cm: l3_1_cm@700 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_1_cm";
reg = <0x700 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1091,6 +1226,7 @@
l3_1_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_1_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1098,6 +1234,7 @@
l3_2_cm: l3_2_cm@800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_2_cm";
reg = <0x800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1105,6 +1242,7 @@
l3_2_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_2_clkctrl";
reg = <0x20 0x14>;
#clock-cells = <2>;
};
@@ -1112,6 +1250,7 @@
ducati_cm: ducati_cm@900 {
compatible = "ti,omap4-cm";
+ clock-output-names = "ducati_cm";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1119,6 +1258,7 @@
ducati_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "ducati_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1126,6 +1266,7 @@
l3_dma_cm: l3_dma_cm@a00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_dma_cm";
reg = <0xa00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1133,6 +1274,7 @@
l3_dma_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_dma_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1140,6 +1282,7 @@
l3_emif_cm: l3_emif_cm@b00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_emif_cm";
reg = <0xb00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1147,6 +1290,7 @@
l3_emif_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_emif_clkctrl";
reg = <0x20 0x1c>;
#clock-cells = <2>;
};
@@ -1154,6 +1298,7 @@
d2d_cm: d2d_cm@c00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "d2d_cm";
reg = <0xc00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1161,6 +1306,7 @@
d2d_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "d2d_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1168,6 +1314,7 @@
l4_cfg_cm: l4_cfg_cm@d00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_cfg_cm";
reg = <0xd00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1175,6 +1322,7 @@
l4_cfg_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_cfg_clkctrl";
reg = <0x20 0x14>;
#clock-cells = <2>;
};
@@ -1182,6 +1330,7 @@
l3_instr_cm: l3_instr_cm@e00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_instr_cm";
reg = <0xe00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1189,6 +1338,7 @@
l3_instr_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_instr_clkctrl";
reg = <0x20 0x24>;
#clock-cells = <2>;
};
@@ -1196,6 +1346,7 @@
ivahd_cm: ivahd_cm@f00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "ivahd_cm";
reg = <0xf00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1203,6 +1354,7 @@
ivahd_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "ivahd_clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
@@ -1210,6 +1362,7 @@
iss_cm: iss_cm@1000 {
compatible = "ti,omap4-cm";
+ clock-output-names = "iss_cm";
reg = <0x1000 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1217,6 +1370,7 @@
iss_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "iss_clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
@@ -1224,6 +1378,7 @@
l3_dss_cm: l3_dss_cm@1100 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_dss_cm";
reg = <0x1100 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1231,6 +1386,7 @@
l3_dss_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_dss_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1238,6 +1394,7 @@
l3_gfx_cm: l3_gfx_cm@1200 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_gfx_cm";
reg = <0x1200 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1245,6 +1402,7 @@
l3_gfx_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_gfx_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1252,6 +1410,7 @@
l3_init_cm: l3_init_cm@1300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3_init_cm";
reg = <0x1300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1259,26 +1418,30 @@
l3_init_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3_init_clkctrl";
reg = <0x20 0xc4>;
#clock-cells = <2>;
};
};
- l4_per_cm: l4_per_cm@1400 {
+ l4_per_cm: clock@1400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_per_cm";
reg = <0x1400 0x200>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1400 0x200>;
l4_per_clkctrl: clock@20 {
- compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_per_clkctrl";
reg = <0x20 0x144>;
#clock-cells = <2>;
};
l4_secure_clkctrl: clock@1a0 {
- compatible = "ti,clkctrl-l4-secure", "ti,clkctrl";
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4_secure_clkctrl";
reg = <0x1a0 0x3c>;
#clock-cells = <2>;
};
@@ -1288,6 +1451,7 @@
&prm {
l4_wkup_cm: l4_wkup_cm@1800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4_wkup_cm";
reg = <0x1800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1295,6 +1459,7 @@
l4_wkup_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4_wkup_clkctrl";
reg = <0x20 0x5c>;
#clock-cells = <2>;
};
@@ -1302,6 +1467,7 @@
emu_sys_cm: emu_sys_cm@1a00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "emu_sys_cm";
reg = <0x1a00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1309,6 +1475,7 @@
emu_sys_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "emu_sys_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 76e499d89d24..3851120857d7 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -128,7 +128,7 @@
#address-cells = <1>;
#size-cells = <0>;
- ethernet: usbether@3 {
+ ethernet: ethernet@3 {
compatible = "usb424,7500";
reg = <3>;
};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 51d5fcae5081..453da9f18a99 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -209,7 +209,7 @@
#size-cells = <0>;
};
- ethernet: usbether@3 {
+ ethernet: ethernet@3 {
compatible = "usb424,9730";
reg = <3>;
};
diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi
index 42f2c447727d..5cf3b0e78c15 100644
--- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
@@ -8,12 +8,14 @@
pad_clks_src_ck: pad_clks_src_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "pad_clks_src_ck";
clock-frequency = <12000000>;
};
pad_clks_ck: pad_clks_ck@108 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "pad_clks_ck";
clocks = <&pad_clks_src_ck>;
ti,bit-shift = <8>;
reg = <0x0108>;
@@ -22,18 +24,21 @@
secure_32k_clk_src_ck: secure_32k_clk_src_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "secure_32k_clk_src_ck";
clock-frequency = <32768>;
};
slimbus_src_clk: slimbus_src_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "slimbus_src_clk";
clock-frequency = <12000000>;
};
slimbus_clk: slimbus_clk@108 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "slimbus_clk";
clocks = <&slimbus_src_clk>;
ti,bit-shift = <10>;
reg = <0x0108>;
@@ -42,66 +47,77 @@
sys_32k_ck: sys_32k_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "sys_32k_ck";
clock-frequency = <32768>;
};
virt_12000000_ck: virt_12000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_12000000_ck";
clock-frequency = <12000000>;
};
virt_13000000_ck: virt_13000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_13000000_ck";
clock-frequency = <13000000>;
};
virt_16800000_ck: virt_16800000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_16800000_ck";
clock-frequency = <16800000>;
};
virt_19200000_ck: virt_19200000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_19200000_ck";
clock-frequency = <19200000>;
};
virt_26000000_ck: virt_26000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_26000000_ck";
clock-frequency = <26000000>;
};
virt_27000000_ck: virt_27000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_27000000_ck";
clock-frequency = <27000000>;
};
virt_38400000_ck: virt_38400000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "virt_38400000_ck";
clock-frequency = <38400000>;
};
xclk60mhsp1_ck: xclk60mhsp1_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp1_ck";
clock-frequency = <60000000>;
};
xclk60mhsp2_ck: xclk60mhsp2_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "xclk60mhsp2_ck";
clock-frequency = <60000000>;
};
dpll_abe_ck: dpll_abe_ck@1e0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-m4xen-clock";
+ clock-output-names = "dpll_abe_ck";
clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
};
@@ -109,12 +125,14 @@
dpll_abe_x2_ck: dpll_abe_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_abe_x2_ck";
clocks = <&dpll_abe_ck>;
};
dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m2x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
reg = <0x01f0>;
@@ -124,6 +142,7 @@
abe_24m_fclk: abe_24m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "abe_24m_fclk";
clocks = <&dpll_abe_m2x2_ck>;
clock-mult = <1>;
clock-div = <8>;
@@ -132,6 +151,7 @@
abe_clk: abe_clk@108 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_clk";
clocks = <&dpll_abe_m2x2_ck>;
ti,max-div = <4>;
reg = <0x0108>;
@@ -141,6 +161,7 @@
abe_iclk: abe_iclk@528 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "abe_iclk";
clocks = <&aess_fclk>;
ti,bit-shift = <24>;
reg = <0x0528>;
@@ -150,6 +171,7 @@
abe_lp_clk_div: abe_lp_clk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "abe_lp_clk_div";
clocks = <&dpll_abe_m2x2_ck>;
clock-mult = <1>;
clock-div = <16>;
@@ -158,6 +180,7 @@
dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_abe_m3x2_ck";
clocks = <&dpll_abe_x2_ck>;
ti,max-div = <31>;
reg = <0x01f4>;
@@ -167,6 +190,7 @@
dpll_core_byp_mux: dpll_core_byp_mux@12c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_core_byp_mux";
clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>;
ti,bit-shift = <23>;
reg = <0x012c>;
@@ -175,6 +199,7 @@
dpll_core_ck: dpll_core_ck@120 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-core-clock";
+ clock-output-names = "dpll_core_ck";
clocks = <&sys_clkin>, <&dpll_core_byp_mux>;
reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
};
@@ -182,12 +207,14 @@
dpll_core_x2_ck: dpll_core_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_core_x2_ck";
clocks = <&dpll_core_ck>;
};
dpll_core_h21x2_ck: dpll_core_h21x2_ck@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h21x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0150>;
@@ -197,6 +224,7 @@
c2c_fclk: c2c_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "c2c_fclk";
clocks = <&dpll_core_h21x2_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -205,6 +233,7 @@
c2c_iclk: c2c_iclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "c2c_iclk";
clocks = <&c2c_fclk>;
clock-mult = <1>;
clock-div = <2>;
@@ -213,6 +242,7 @@
dpll_core_h11x2_ck: dpll_core_h11x2_ck@138 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h11x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0138>;
@@ -222,6 +252,7 @@
dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h12x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x013c>;
@@ -231,6 +262,7 @@
dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h13x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0140>;
@@ -240,6 +272,7 @@
dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h14x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0144>;
@@ -249,6 +282,7 @@
dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h22x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0154>;
@@ -258,6 +292,7 @@
dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h23x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x0158>;
@@ -267,6 +302,7 @@
dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_h24x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <63>;
reg = <0x015c>;
@@ -276,6 +312,7 @@
dpll_core_m2_ck: dpll_core_m2_ck@130 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m2_ck";
clocks = <&dpll_core_ck>;
ti,max-div = <31>;
reg = <0x0130>;
@@ -285,6 +322,7 @@
dpll_core_m3x2_ck: dpll_core_m3x2_ck@134 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_core_m3x2_ck";
clocks = <&dpll_core_x2_ck>;
ti,max-div = <31>;
reg = <0x0134>;
@@ -294,6 +332,7 @@
iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "iva_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -302,6 +341,7 @@
dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_iva_byp_mux";
clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x01ac>;
@@ -310,6 +350,7 @@
dpll_iva_ck: dpll_iva_ck@1a0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_iva_ck";
clocks = <&sys_clkin>, <&dpll_iva_byp_mux>;
reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
assigned-clocks = <&dpll_iva_ck>;
@@ -319,12 +360,14 @@
dpll_iva_x2_ck: dpll_iva_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_iva_x2_ck";
clocks = <&dpll_iva_ck>;
};
dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@1b8 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_h11x2_ck";
clocks = <&dpll_iva_x2_ck>;
ti,max-div = <63>;
reg = <0x01b8>;
@@ -336,6 +379,7 @@
dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@1bc {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_iva_h12x2_ck";
clocks = <&dpll_iva_x2_ck>;
ti,max-div = <63>;
reg = <0x01bc>;
@@ -347,6 +391,7 @@
mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "mpu_dpll_hs_clk_div";
clocks = <&dpll_core_h12x2_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -355,6 +400,7 @@
dpll_mpu_ck: dpll_mpu_ck@160 {
#clock-cells = <0>;
compatible = "ti,omap5-mpu-dpll-clock";
+ clock-output-names = "dpll_mpu_ck";
clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>;
reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
};
@@ -362,6 +408,7 @@
dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_mpu_m2_ck";
clocks = <&dpll_mpu_ck>;
ti,max-div = <31>;
reg = <0x0170>;
@@ -371,6 +418,7 @@
per_dpll_hs_clk_div: per_dpll_hs_clk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "per_dpll_hs_clk_div";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -379,6 +427,7 @@
usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "usb_dpll_hs_clk_div";
clocks = <&dpll_abe_m3x2_ck>;
clock-mult = <1>;
clock-div = <3>;
@@ -387,6 +436,7 @@
l3_iclk_div: l3_iclk_div@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3_iclk_div";
ti,max-div = <2>;
ti,bit-shift = <4>;
reg = <0x100>;
@@ -397,6 +447,7 @@
gpu_l3_iclk: gpu_l3_iclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "gpu_l3_iclk";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
clock-div = <1>;
@@ -405,6 +456,7 @@
l4_root_clk_div: l4_root_clk_div@100 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l4_root_clk_div";
ti,max-div = <2>;
ti,bit-shift = <8>;
reg = <0x100>;
@@ -415,6 +467,7 @@
slimbus1_slimbus_clk: slimbus1_slimbus_clk@560 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "slimbus1_slimbus_clk";
clocks = <&slimbus_clk>;
ti,bit-shift = <11>;
reg = <0x0560>;
@@ -423,6 +476,7 @@
aess_fclk: aess_fclk@528 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "aess_fclk";
clocks = <&abe_clk>;
ti,bit-shift = <24>;
ti,max-div = <2>;
@@ -432,6 +486,7 @@
mcasp_sync_mux_ck: mcasp_sync_mux_ck@540 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "mcasp_sync_mux_ck";
clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>;
ti,bit-shift = <26>;
reg = <0x0540>;
@@ -440,6 +495,7 @@
mcasp_gfclk: mcasp_gfclk@540 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "mcasp_gfclk";
clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>;
ti,bit-shift = <24>;
reg = <0x0540>;
@@ -448,6 +504,7 @@
dummy_ck: dummy_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
+ clock-output-names = "dummy_ck";
clock-frequency = <0>;
};
};
@@ -455,6 +512,7 @@
sys_clkin: sys_clkin@110 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "sys_clkin";
clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
reg = <0x0110>;
ti,index-starts-at-one;
@@ -463,6 +521,7 @@
abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@108 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_bypass_clk_mux";
clocks = <&sys_clkin>, <&sys_32k_ck>;
reg = <0x0108>;
};
@@ -470,6 +529,7 @@
abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "abe_dpll_clk_mux";
clocks = <&sys_clkin>, <&sys_32k_ck>;
reg = <0x010c>;
};
@@ -477,6 +537,7 @@
custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "custefuse_sys_gfclk_div";
clocks = <&sys_clkin>;
clock-mult = <1>;
clock-div = <2>;
@@ -485,6 +546,7 @@
dss_syc_gfclk_div: dss_syc_gfclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dss_syc_gfclk_div";
clocks = <&sys_clkin>;
clock-mult = <1>;
clock-div = <1>;
@@ -493,6 +555,7 @@
wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "wkupaon_iclk_mux";
clocks = <&sys_clkin>, <&abe_lp_clk_div>;
reg = <0x0108>;
};
@@ -500,6 +563,7 @@
l3instr_ts_gclk_div: l3instr_ts_gclk_div {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "l3instr_ts_gclk_div";
clocks = <&wkupaon_iclk_mux>;
clock-mult = <1>;
clock-div = <1>;
@@ -511,6 +575,7 @@
dpll_per_byp_mux: dpll_per_byp_mux@14c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_per_byp_mux";
clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x014c>;
@@ -519,6 +584,7 @@
dpll_per_ck: dpll_per_ck@140 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_per_ck";
clocks = <&sys_clkin>, <&dpll_per_byp_mux>;
reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
};
@@ -526,12 +592,14 @@
dpll_per_x2_ck: dpll_per_x2_ck {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-x2-clock";
+ clock-output-names = "dpll_per_x2_ck";
clocks = <&dpll_per_ck>;
};
dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h11x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
reg = <0x0158>;
@@ -541,6 +609,7 @@
dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h12x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
reg = <0x015c>;
@@ -550,6 +619,7 @@
dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_h14x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <63>;
reg = <0x0164>;
@@ -559,6 +629,7 @@
dpll_per_m2_ck: dpll_per_m2_ck@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2_ck";
clocks = <&dpll_per_ck>;
ti,max-div = <31>;
reg = <0x0150>;
@@ -568,6 +639,7 @@
dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m2x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
reg = <0x0150>;
@@ -577,6 +649,7 @@
dpll_per_m3x2_ck: dpll_per_m3x2_ck@154 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_per_m3x2_ck";
clocks = <&dpll_per_x2_ck>;
ti,max-div = <31>;
reg = <0x0154>;
@@ -586,6 +659,7 @@
dpll_unipro1_ck: dpll_unipro1_ck@200 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_unipro1_ck";
clocks = <&sys_clkin>, <&sys_clkin>;
reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
};
@@ -593,6 +667,7 @@
dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_unipro1_clkdcoldo";
clocks = <&dpll_unipro1_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -601,6 +676,7 @@
dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@210 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_unipro1_m2_ck";
clocks = <&dpll_unipro1_ck>;
ti,max-div = <127>;
reg = <0x0210>;
@@ -610,6 +686,7 @@
dpll_unipro2_ck: dpll_unipro2_ck@1c0 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-clock";
+ clock-output-names = "dpll_unipro2_ck";
clocks = <&sys_clkin>, <&sys_clkin>;
reg = <0x01c0>, <0x01c4>, <0x01cc>, <0x01c8>;
};
@@ -617,6 +694,7 @@
dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_unipro2_clkdcoldo";
clocks = <&dpll_unipro2_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -625,6 +703,7 @@
dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@1d0 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_unipro2_m2_ck";
clocks = <&dpll_unipro2_ck>;
ti,max-div = <127>;
reg = <0x01d0>;
@@ -634,6 +713,7 @@
dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "dpll_usb_byp_mux";
clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>;
ti,bit-shift = <23>;
reg = <0x018c>;
@@ -642,6 +722,7 @@
dpll_usb_ck: dpll_usb_ck@180 {
#clock-cells = <0>;
compatible = "ti,omap4-dpll-j-type-clock";
+ clock-output-names = "dpll_usb_ck";
clocks = <&sys_clkin>, <&dpll_usb_byp_mux>;
reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
};
@@ -649,6 +730,7 @@
dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "dpll_usb_clkdcoldo";
clocks = <&dpll_usb_ck>;
clock-mult = <1>;
clock-div = <1>;
@@ -657,6 +739,7 @@
dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "dpll_usb_m2_ck";
clocks = <&dpll_usb_ck>;
ti,max-div = <127>;
reg = <0x0190>;
@@ -666,6 +749,7 @@
func_128m_clk: func_128m_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_128m_clk";
clocks = <&dpll_per_h11x2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -674,6 +758,7 @@
func_12m_fclk: func_12m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_12m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <16>;
@@ -682,6 +767,7 @@
func_24m_clk: func_24m_clk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_24m_clk";
clocks = <&dpll_per_m2_ck>;
clock-mult = <1>;
clock-div = <4>;
@@ -690,6 +776,7 @@
func_48m_fclk: func_48m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_48m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <4>;
@@ -698,6 +785,7 @@
func_96m_fclk: func_96m_fclk {
#clock-cells = <0>;
compatible = "fixed-factor-clock";
+ clock-output-names = "func_96m_fclk";
clocks = <&dpll_per_m2x2_ck>;
clock-mult = <1>;
clock-div = <2>;
@@ -706,6 +794,7 @@
l3init_60m_fclk: l3init_60m_fclk@104 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "l3init_60m_fclk";
clocks = <&dpll_usb_m2_ck>;
reg = <0x0104>;
ti,dividers = <1>, <8>;
@@ -714,6 +803,7 @@
iss_ctrlclk: iss_ctrlclk@1320 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "iss_ctrlclk";
clocks = <&func_96m_fclk>;
ti,bit-shift = <8>;
reg = <0x1320>;
@@ -722,6 +812,7 @@
lli_txphy_clk: lli_txphy_clk@f20 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "lli_txphy_clk";
clocks = <&dpll_unipro1_clkdcoldo>;
ti,bit-shift = <8>;
reg = <0x0f20>;
@@ -730,6 +821,7 @@
lli_txphy_ls_clk: lli_txphy_ls_clk@f20 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "lli_txphy_ls_clk";
clocks = <&dpll_unipro1_m2_ck>;
ti,bit-shift = <9>;
reg = <0x0f20>;
@@ -738,6 +830,7 @@
usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "usb_phy_cm_clk32k";
clocks = <&sys_32k_ck>;
ti,bit-shift = <8>;
reg = <0x0640>;
@@ -746,6 +839,7 @@
fdif_fclk: fdif_fclk@1328 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "fdif_fclk";
clocks = <&dpll_per_h11x2_ck>;
ti,bit-shift = <24>;
ti,max-div = <2>;
@@ -755,6 +849,7 @@
gpu_core_gclk_mux: gpu_core_gclk_mux@1520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpu_core_gclk_mux";
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
ti,bit-shift = <24>;
reg = <0x1520>;
@@ -763,6 +858,7 @@
gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1520 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "gpu_hyd_gclk_mux";
clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>;
ti,bit-shift = <25>;
reg = <0x1520>;
@@ -771,6 +867,7 @@
hsi_fclk: hsi_fclk@1638 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "hsi_fclk";
clocks = <&dpll_per_m2x2_ck>;
ti,bit-shift = <24>;
ti,max-div = <2>;
@@ -781,6 +878,7 @@
&cm_core_clockdomains {
l3init_clkdm: l3init_clkdm {
compatible = "ti,clockdomain";
+ clock-output-names = "l3init_clkdm";
clocks = <&dpll_usb_ck>;
};
};
@@ -789,6 +887,7 @@
auxclk0_src_gate_ck: auxclk0_src_gate_ck@310 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk0_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0310>;
@@ -797,6 +896,7 @@
auxclk0_src_mux_ck: auxclk0_src_mux_ck@310 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk0_src_mux_ck";
clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0310>;
@@ -805,12 +905,14 @@
auxclk0_src_ck: auxclk0_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk0_src_ck";
clocks = <&auxclk0_src_gate_ck>, <&auxclk0_src_mux_ck>;
};
auxclk0_ck: auxclk0_ck@310 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk0_ck";
clocks = <&auxclk0_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -820,6 +922,7 @@
auxclk1_src_gate_ck: auxclk1_src_gate_ck@314 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk1_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0314>;
@@ -828,6 +931,7 @@
auxclk1_src_mux_ck: auxclk1_src_mux_ck@314 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk1_src_mux_ck";
clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0314>;
@@ -836,12 +940,14 @@
auxclk1_src_ck: auxclk1_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk1_src_ck";
clocks = <&auxclk1_src_gate_ck>, <&auxclk1_src_mux_ck>;
};
auxclk1_ck: auxclk1_ck@314 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk1_ck";
clocks = <&auxclk1_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -851,6 +957,7 @@
auxclk2_src_gate_ck: auxclk2_src_gate_ck@318 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk2_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0318>;
@@ -859,6 +966,7 @@
auxclk2_src_mux_ck: auxclk2_src_mux_ck@318 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk2_src_mux_ck";
clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0318>;
@@ -867,12 +975,14 @@
auxclk2_src_ck: auxclk2_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk2_src_ck";
clocks = <&auxclk2_src_gate_ck>, <&auxclk2_src_mux_ck>;
};
auxclk2_ck: auxclk2_ck@318 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk2_ck";
clocks = <&auxclk2_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -882,6 +992,7 @@
auxclk3_src_gate_ck: auxclk3_src_gate_ck@31c {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk3_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x031c>;
@@ -890,6 +1001,7 @@
auxclk3_src_mux_ck: auxclk3_src_mux_ck@31c {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk3_src_mux_ck";
clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x031c>;
@@ -898,12 +1010,14 @@
auxclk3_src_ck: auxclk3_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk3_src_ck";
clocks = <&auxclk3_src_gate_ck>, <&auxclk3_src_mux_ck>;
};
auxclk3_ck: auxclk3_ck@31c {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk3_ck";
clocks = <&auxclk3_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -913,6 +1027,7 @@
auxclk4_src_gate_ck: auxclk4_src_gate_ck@320 {
#clock-cells = <0>;
compatible = "ti,composite-no-wait-gate-clock";
+ clock-output-names = "auxclk4_src_gate_ck";
clocks = <&dpll_core_m3x2_ck>;
ti,bit-shift = <8>;
reg = <0x0320>;
@@ -921,6 +1036,7 @@
auxclk4_src_mux_ck: auxclk4_src_mux_ck@320 {
#clock-cells = <0>;
compatible = "ti,composite-mux-clock";
+ clock-output-names = "auxclk4_src_mux_ck";
clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>;
ti,bit-shift = <1>;
reg = <0x0320>;
@@ -929,12 +1045,14 @@
auxclk4_src_ck: auxclk4_src_ck {
#clock-cells = <0>;
compatible = "ti,composite-clock";
+ clock-output-names = "auxclk4_src_ck";
clocks = <&auxclk4_src_gate_ck>, <&auxclk4_src_mux_ck>;
};
auxclk4_ck: auxclk4_ck@320 {
#clock-cells = <0>;
compatible = "ti,divider-clock";
+ clock-output-names = "auxclk4_ck";
clocks = <&auxclk4_src_ck>;
ti,bit-shift = <16>;
ti,max-div = <16>;
@@ -944,6 +1062,7 @@
auxclkreq0_ck: auxclkreq0_ck@210 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq0_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
ti,bit-shift = <2>;
reg = <0x0210>;
@@ -952,6 +1071,7 @@
auxclkreq1_ck: auxclkreq1_ck@214 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq1_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
ti,bit-shift = <2>;
reg = <0x0214>;
@@ -960,6 +1080,7 @@
auxclkreq2_ck: auxclkreq2_ck@218 {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq2_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
ti,bit-shift = <2>;
reg = <0x0218>;
@@ -968,6 +1089,7 @@
auxclkreq3_ck: auxclkreq3_ck@21c {
#clock-cells = <0>;
compatible = "ti,mux-clock";
+ clock-output-names = "auxclkreq3_ck";
clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>;
ti,bit-shift = <2>;
reg = <0x021c>;
@@ -977,6 +1099,7 @@
&cm_core_aon {
mpu_cm: mpu_cm@300 {
compatible = "ti,omap4-cm";
+ clock-output-names = "mpu_cm";
reg = <0x300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -984,6 +1107,7 @@
mpu_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "mpu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -991,6 +1115,7 @@
dsp_cm: dsp_cm@400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dsp_cm";
reg = <0x400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -998,6 +1123,7 @@
dsp_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dsp_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1005,6 +1131,7 @@
abe_cm: abe_cm@500 {
compatible = "ti,omap4-cm";
+ clock-output-names = "abe_cm";
reg = <0x500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1012,6 +1139,7 @@
abe_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "abe_clkctrl";
reg = <0x20 0x64>;
#clock-cells = <2>;
};
@@ -1022,6 +1150,7 @@
&cm_core {
l3main1_cm: l3main1_cm@700 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3main1_cm";
reg = <0x700 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1029,6 +1158,7 @@
l3main1_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3main1_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1036,6 +1166,7 @@
l3main2_cm: l3main2_cm@800 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3main2_cm";
reg = <0x800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1043,6 +1174,7 @@
l3main2_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3main2_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1050,6 +1182,7 @@
ipu_cm: ipu_cm@900 {
compatible = "ti,omap4-cm";
+ clock-output-names = "ipu_cm";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1057,6 +1190,7 @@
ipu_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "ipu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1064,6 +1198,7 @@
dma_cm: dma_cm@a00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dma_cm";
reg = <0xa00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1071,6 +1206,7 @@
dma_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dma_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1078,6 +1214,7 @@
emif_cm: emif_cm@b00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "emif_cm";
reg = <0xb00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1085,6 +1222,7 @@
emif_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "emif_clkctrl";
reg = <0x20 0x1c>;
#clock-cells = <2>;
};
@@ -1092,6 +1230,7 @@
l4cfg_cm: l4cfg_cm@d00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4cfg_cm";
reg = <0xd00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1099,6 +1238,7 @@
l4cfg_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l4cfg_clkctrl";
reg = <0x20 0x14>;
#clock-cells = <2>;
};
@@ -1106,6 +1246,7 @@
l3instr_cm: l3instr_cm@e00 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3instr_cm";
reg = <0xe00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1113,26 +1254,30 @@
l3instr_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3instr_clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
};
- l4per_cm: l4per_cm@1000 {
+ l4per_cm: clock@1000 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l4per_cm";
reg = <0x1000 0x200>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1000 0x200>;
l4per_clkctrl: clock@20 {
- compatible = "ti,clkctrl-l4per", "ti,clkctrl";
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4per_clkctrl";
reg = <0x20 0x15c>;
#clock-cells = <2>;
};
l4sec_clkctrl: clock@1a0 {
- compatible = "ti,clkctrl-l4sec", "ti,clkctrl";
+ compatible = "ti,clkctrl";
+ clock-output-names = "l4sec_clkctrl";
reg = <0x1a0 0x3c>;
#clock-cells = <2>;
};
@@ -1140,6 +1285,7 @@
dss_cm: dss_cm@1400 {
compatible = "ti,omap4-cm";
+ clock-output-names = "dss_cm";
reg = <0x1400 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1147,6 +1293,7 @@
dss_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "dss_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1154,6 +1301,7 @@
gpu_cm: gpu_cm@1500 {
compatible = "ti,omap4-cm";
+ clock-output-names = "gpu_cm";
reg = <0x1500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1161,6 +1309,7 @@
gpu_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "gpu_clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
@@ -1168,6 +1317,7 @@
l3init_cm: l3init_cm@1600 {
compatible = "ti,omap4-cm";
+ clock-output-names = "l3init_cm";
reg = <0x1600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1175,6 +1325,7 @@
l3init_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "l3init_clkctrl";
reg = <0x20 0xd4>;
#clock-cells = <2>;
};
@@ -1184,6 +1335,7 @@
&prm {
wkupaon_cm: wkupaon_cm@1900 {
compatible = "ti,omap4-cm";
+ clock-output-names = "wkupaon_cm";
reg = <0x1900 0x100>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1191,6 +1343,7 @@
wkupaon_clkctrl: clk@20 {
compatible = "ti,clkctrl";
+ clock-output-names = "wkupaon_clkctrl";
reg = <0x20 0x5c>;
#clock-cells = <2>;
};
@@ -1201,6 +1354,7 @@
fref_xtal_ck: fref_xtal_ck {
#clock-cells = <0>;
compatible = "ti,gate-clock";
+ clock-output-names = "fref_xtal_ck";
clocks = <&sys_clkin>;
ti,bit-shift = <28>;
reg = <0x14>;
diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index 90846a7655b4..dde4364892bf 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -287,7 +287,7 @@
clocks = <&armclk>;
};
- gic: gic@1000 {
+ gic: interrupt-controller@1000 {
compatible = "arm,arm11mp-gic";
interrupt-controller;
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
new file mode 100644
index 000000000000..ace8cea27949
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8026-asus-sparrow.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "qcom-pm8226.dtsi"
+
+/ {
+ model = "ASUS ZenWatch 2";
+ compatible = "asus,sparrow", "qcom,apq8026";
+ chassis-type = "watch";
+ qcom,msm-id = <199 0x20000>;
+ qcom,board-id = <8 3005>;
+
+ reserved-memory {
+ sbl_region: sbl@2f00000 {
+ reg = <0x02f00000 0x100000>;
+ no-map;
+ };
+ external_image_region: external-image@3100000 {
+ reg = <0x3100000 0x200000>;
+ no-map;
+ };
+ peripheral_region: peripheral@3300000 {
+ reg = <0x3300000 0x600000>;
+ no-map;
+ };
+ adsp_region: adsp@3900000 {
+ reg = <0x3900000 0x1400000>;
+ no-map;
+ };
+ modem_region: modem@4d00000 {
+ reg = <0x4d00000 0x1b00000>;
+ no-map;
+ };
+ modem_efs_region: modem-efs@7f00000 {
+ reg = <0x7f00000 0x100000>;
+ no-map;
+ };
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_default_state>;
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&blsp1_uart1_default_state>;
+
+ bluetooth {
+ compatible = "brcm,bcm43430a1-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_state>;
+
+ host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 34 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pm8226_vib {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8226-regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+};
+
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ non-removable;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_hostwake_default_state>;
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <350000>;
+ qcom,fast-charge-safe-voltage = <4430000>;
+ qcom,fast-charge-high-threshold-voltage = <4400000>;
+ qcom,auto-recharge-threshold-voltage = <4300000>;
+ qcom,minimum-input-voltage = <4400000>;
+};
+
+&tlmm {
+ blsp1_uart1_default_state: blsp1-uart1-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ bluetooth_default_state: bluetooth-default-state {
+ pins = "gpio48", "gpio61";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_hostwake_default_state: wlan-hostwake-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_regulator_default_state: wlan-regulator-default-state {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&usb {
+ status = "okay";
+ extcon = <&smbb>;
+ dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+ extcon = <&smbb>;
+ v1p8-supply = <&pm8226_l10>;
+ v3p3-supply = <&pm8226_l20>;
+};
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..0cee62c7b8b0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a1c8ae516d21..34c0ba7fa358 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -227,7 +227,7 @@
smd {
compatible = "qcom,smd";
- modem@0 {
+ modem-edge {
interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&l2cc 8 3>;
@@ -236,7 +236,7 @@
status = "disabled";
};
- q6@1 {
+ q6-edge {
interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&l2cc 8 15>;
@@ -245,7 +245,7 @@
status = "disabled";
};
- dsps@3 {
+ dsps-edge {
interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
@@ -254,7 +254,7 @@
status = "disabled";
};
- riva@6 {
+ riva-edge {
interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&l2cc 8 25>;
@@ -1040,7 +1040,7 @@
};
/* Temporary fixed regulator */
- sdcc1bam:dma@12402000{
+ sdcc1bam: dma-controller@12402000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1050,7 +1050,7 @@
qcom,ee = <0>;
};
- sdcc3bam:dma@12182000{
+ sdcc3bam: dma-controller@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1060,7 +1060,7 @@
qcom,ee = <0>;
};
- sdcc4bam:dma@121c2000{
+ sdcc4bam: dma-controller@121c2000{
compatible = "qcom,bam-v1.3.0";
reg = <0x121c2000 0x8000>;
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
@@ -1548,7 +1548,7 @@
qcom,mmio = <&riva>;
- bt {
+ bluetooth {
compatible = "qcom,wcnss-bt";
};
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index 83793b835d40..3051a861ff0c 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -16,331 +16,293 @@
chosen {
stdout-path = "serial0:115200n8";
};
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
- soc {
- serial@f991e000 {
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <200000>;
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs2_phy>;
+ phy-select = <&tcsr 0xb000 1>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@b {
status = "okay";
+ v3p3-supply = <&pm8941_l24>;
+ v1p8-supply = <&pm8941_l6>;
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x63>;
+ };
+ };
+};
+
+&rpm_requests {
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
};
- sdhci@f9824900 {
- bus-width = <8>;
- non-removable;
- status = "okay";
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
};
+ };
- sdhci@f98a4900 {
- cd-gpios = <&msmgpio 62 0x1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- bus-width = <4>;
- status = "okay";
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vin_5vs-supply = <&pm8941_5v>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
};
- usb@f9a55000 {
- status = "okay";
- phys = <&usb_hs2_phy>;
- phy-select = <&tcsr 0xb000 1>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
- hnp-disable;
- srp-disable;
- adp-disable;
- ulpi {
- phy@b {
- status = "okay";
- v3p3-supply = <&pm8941_l24>;
- v1p8-supply = <&pm8941_l6>;
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x63>;
- };
- };
- };
-
-
- pinctrl@fd510000 {
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
- };
- };
-
- spi8_default: spi8_default {
- mosi {
- pins = "gpio45";
- function = "blsp_spi8";
- };
- miso {
- pins = "gpio46";
- function = "blsp_spi8";
- };
- cs {
- pins = "gpio47";
- function = "blsp_spi8";
- };
- clk {
- pins = "gpio48";
- function = "blsp_spi8";
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
- };
-
- i2c@f9967000 {
- status = "okay";
- clock-frequency = <200000>;
- pinctrl-0 = <&i2c11_pins>;
- pinctrl-names = "default";
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- eeprom: eeprom@52 {
- compatible = "atmel,24c128";
- reg = <0x52>;
- pagesize = <32>;
- read-only;
- };
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
};
};
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 62 0x1>;
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+};
+
+&tlmm {
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vin_5vs-supply = <&pm8941_5v>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-system-load = <200000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 52240fc7a1a6..da50a1a0197f 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -470,7 +470,7 @@
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
- rpm_requests {
+ rpm-requests {
compatible = "qcom,rpm-apq8084";
qcom,smd-channels = "rpm_requests";
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 0c10d9e096db..03bb9e1768c4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -64,7 +64,7 @@
};
};
- blsp_dma: dma@7884000 {
+ blsp_dma: dma-controller@7884000 {
status = "okay";
};
@@ -89,7 +89,7 @@
status = "okay";
};
- cryptobam: dma@8e04000 {
+ cryptobam: dma-controller@8e04000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index a7b1201dd614..79b0c6318e52 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -8,7 +8,7 @@
compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
soc {
- dma@7984000 {
+ dma-controller@7984000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..faeaa6bf0def 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -79,7 +79,7 @@
status = "okay";
};
- dma@7884000 {
+ dma-controller@7884000 {
status = "okay";
};
@@ -89,7 +89,7 @@
status = "okay";
cs-gpios = <&tlmm 12 0>;
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
index 06f9f2cb2fe9..d596dd1180ae 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
@@ -52,7 +52,7 @@
status = "okay";
cs-gpios = <&tlmm 12 0>;
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 94872518b5a2..0107f552f520 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -52,7 +52,7 @@
status = "okay";
};
- dma@7884000 {
+ dma-controller@7884000 {
status = "okay";
};
@@ -62,7 +62,7 @@
status = "okay";
};
- dma@7984000 {
+ dma-controller@7984000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index a9d0566a3190..9d5e934f2272 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -233,7 +233,7 @@
status = "disabled";
};
- blsp_dma: dma@7884000 {
+ blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -253,8 +253,8 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&blsp_dma 5>, <&blsp_dma 4>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -267,8 +267,8 @@
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&blsp_dma 7>, <&blsp_dma 6>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -276,13 +276,13 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&blsp_dma 9>, <&blsp_dma 8>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -290,17 +290,17 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&blsp_dma 11>, <&blsp_dma 10>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
status = "disabled";
};
- cryptobam: dma@8e04000 {
+ cryptobam: dma-controller@8e04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x08e04000 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,8 +382,8 @@
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 1>, <&blsp_dma 0>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+ dma-names = "tx", "rx";
};
blsp1_uart2: serial@78b0000 {
@@ -394,8 +394,8 @@
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 3>, <&blsp_dma 2>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+ dma-names = "tx", "rx";
};
watchdog: watchdog@b017000 {
@@ -471,7 +471,7 @@
status = "disabled";
};
- qpic_bam: dma@7984000 {
+ qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x7984000 0x1a000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 65330065390a..5c802b99e15f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -36,7 +36,7 @@
cs-gpios = <&qcom_pinmux 20 0>;
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 8cb04aa8ed2f..808ea1862283 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,13 +298,13 @@
};
clocks {
- cxo_board {
+ cxo_board: cxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
- pxo_board {
+ pxo_board: pxo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
@@ -736,7 +736,9 @@
};
gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
+ compatible = "qcom,gcc-ipq8064", "syscon";
+ clocks = <&pxo_board>, <&cxo_board>;
+ clock-names = "pxo", "cxo";
reg = <0x00900000 0x4000>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -1155,7 +1157,7 @@
regulator-always-on;
};
- sdcc1bam: dma@12402000 {
+ sdcc1bam: dma-controller@12402000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12402000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1165,7 +1167,7 @@
qcom,ee = <0>;
};
- sdcc3bam: dma@12182000 {
+ sdcc3bam: dma-controller@12182000 {
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 4d4f37cebf21..8f0752ce1c7b 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -330,7 +330,7 @@
};
};
- sdcc1bam: dma@12182000{
+ sdcc1bam: dma-controller@12182000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12182000 0x8000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -340,7 +340,7 @@
qcom,ee = <0>;
};
- sdcc2bam: dma@12142000{
+ sdcc2bam: dma-controller@12142000{
compatible = "qcom,bam-v1.3.0";
reg = <0x12142000 0x8000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 85e56992d2d0..28eca15b5712 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -182,6 +182,15 @@
status = "disabled";
};
+ blsp1_uart1: serial@f991d000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991d000 0x1000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp1_uart3: serial@f991f000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991f000 0x1000>;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index a258abb23a64..47b97daecef1 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -212,6 +212,7 @@
ranges;
syscon-tcsr = <&tcsr>;
+ status = "disabled";
gsbi8_i2c: i2c@19880000 {
compatible = "qcom,i2c-qup-v1.1.1";
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
deleted file mode 100644
index 6d77e0f8ca4d..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ /dev/null
@@ -1,409 +0,0 @@
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-
-/ {
- model = "Fairphone 2";
- compatible = "fairphone,fp2", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_CAMERA>;
- wakeup-source;
- debounce-interval = <15>;
- };
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- wakeup-source;
- debounce-interval = <15>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- wakeup-source;
- debounce-interval = <15>;
- };
- };
-
- vibrator {
- compatible = "gpio-vibrator";
- enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
- vcc-supply = <&pm8941_l18>;
- };
-
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
-
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <3350000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
-};
-
-&soc {
- serial@f991e000 {
- status = "okay";
- };
-
- remoteproc@fb21b000 {
- status = "okay";
-
- vddmx-supply = <&pm8841_s1>;
- vddcx-supply = <&pm8841_s2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wcnss_pin_a>;
-
- smd-edge {
- qcom,remote-pid = <4>;
- label = "pronto";
-
- wcnss {
- status = "okay";
- };
- };
- };
-
- pinctrl@fd510000 {
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- wcnss_pin_a: wcnss-pin-active {
- wlan {
- pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
- function = "wlan";
-
- drive-strength = <6>;
- bias-pull-down;
- };
-
- bt {
- pins = "gpio35", "gpio43", "gpio44";
- function = "bt";
-
- drive-strength = <2>;
- bias-pull-down;
- };
-
- fm {
- pins = "gpio41", "gpio42";
- function = "fm";
-
- drive-strength = <2>;
- bias-pull-down;
- };
- };
- };
-
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- bus-width = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>;
- };
-
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-
- imem@fe805000 {
- status = "okay";
-
- reboot-mode {
- mode-normal = <0x77665501>;
- mode-bootloader = <0x77665500>;
- mode-recovery = <0x77665502>;
- };
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio1", "gpio2", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 069136170198..9493886a5c0d 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -2,7 +2,6 @@
#include "qcom-msm8974.dtsi"
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
@@ -12,213 +11,31 @@
aliases {
serial0 = &blsp1_uart1;
- serial1 = &blsp2_uart10;
+ serial1 = &blsp2_uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <815000>;
- regulator-max-microvolt = <900000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
-
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- regulator-system-load = <200000>;
- regulator-allow-set-load;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
};
};
@@ -229,7 +46,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -237,525 +54,570 @@
};
};
-&soc {
- serial@f991d000 {
- status = "okay";
+&blsp1_i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ charger: bq24192@6b {
+ compatible = "ti,bq24192";
+ reg = <0x6b>;
+ interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+
+ omit-battery-class;
+
+ usb_otg_vbus: usb-otg-vbus { };
};
- pinctrl@fd510000 {
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
+ fuelgauge: max17048@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x4d>;
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
- i2c1_pins: i2c1 {
- mux {
- pins = "gpio2", "gpio3";
- function = "blsp_i2c1";
+ maxim,alert-low-soc-level = <2>;
+ };
+};
- drive-strength = <2>;
- bias-disable;
- };
- };
+&blsp1_i2c2 {
+ status = "okay";
+ clock-frequency = <355000>;
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
+ synaptics@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
- drive-strength = <2>;
- bias-disable;
- };
- };
+ interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
- i2c3_pins: i2c3 {
- mux {
- pins = "gpio10", "gpio11";
- function = "blsp_i2c3";
- drive-strength = <2>;
- bias-disable;
- };
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
+ #address-cells = <1>;
+ #size-cells = <0>;
- drive-strength = <2>;
- bias-disable;
- };
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
};
- i2c12_pins: i2c12 {
- mux {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
- drive-strength = <2>;
- bias-disable;
- };
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
};
+ };
+};
- mpu6515_pin: mpu6515 {
- irq {
- pins = "gpio73";
- function = "gpio";
- bias-disable;
- input-enable;
- };
- };
+&blsp1_i2c3 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ avago_apds993@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+ interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <0>;
+ };
+};
- touch_pin: touch {
- int {
- pins = "gpio5";
- function = "gpio";
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ status = "okay";
+ reg = <0x38>;
- reset {
- pins = "gpio8";
- function = "gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
- drive-strength = <2>;
- bias-pull-up;
- };
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
};
+ };
+};
- panel_pin: panel {
- te {
- pins = "gpio12";
- function = "mdp_vsync";
+&blsp2_i2c6 {
+ status = "okay";
+ clock-frequency = <100000>;
- drive-strength = <2>;
- bias-disable;
- };
- };
+ mpu6515@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+ interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
+ vddio-supply = <&pm8941_lvs1>;
- bt_pin: bt {
- hostwake {
- pins = "gpio42";
- function = "gpio";
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6515_pin>;
+
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
- devwake {
- pins = "gpio62";
- function = "gpio";
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ak8963@f {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0f>;
+ gpios = <&tlmm 67 0>;
+ vid-supply = <&pm8941_lvs1>;
+ vdd-supply = <&pm8941_l17>;
};
- shutdown {
- pins = "gpio41";
- function = "gpio";
+ bmp280@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ vdda-supply = <&pm8941_lvs1>;
+ vddd-supply = <&pm8941_l17>;
};
};
+ };
+};
- blsp2_uart10_pin_a: blsp2-uart10-pin-active {
- tx {
- pins = "gpio53";
- function = "blsp_uart10";
+&blsp1_uart1 {
+ status = "okay";
+};
- drive-strength = <2>;
- bias-disable;
- };
+&blsp2_uart4 {
+ status = "okay";
- rx {
- pins = "gpio54";
- function = "blsp_uart10";
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
- drive-strength = <2>;
- bias-pull-up;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pin>;
+
+ host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
+ };
+};
- cts {
- pins = "gpio55";
- function = "blsp_uart10";
+&dsi0 {
+ status = "okay";
- drive-strength = <2>;
- bias-pull-up;
- };
+ vdda-supply = <&pm8941_l2>;
+ vdd-supply = <&pm8941_lvs3>;
+ vddio-supply = <&pm8941_l12>;
- rts {
- pins = "gpio56";
- function = "blsp_uart10";
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "lg,acx467akm-7";
- drive-strength = <2>;
- bias-disable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
};
};
};
+};
- sdhci@f9824900 {
- status = "okay";
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
+&dsi0_phy {
+ status = "okay";
- bus-width = <8>;
- non-removable;
+ vddio-supply = <&pm8941_l12>;
+};
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
+&mdss {
+ status = "okay";
+};
- sdhci@f98a4900 {
- status = "okay";
+&otg {
+ status = "okay";
- max-frequency = <100000000>;
- bus-width = <4>;
- non-removable;
- vmmc-supply = <&vreg_wlan>;
- vqmmc-supply = <&pm8941_s3>;
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>;
+ extcon = <&charger>, <&usb_id>;
+ vbus-supply = <&usb_otg_vbus>;
- #address-cells = <1>;
- #size-cells = <0>;
+ hnp-disable;
+ srp-disable;
+ adp-disable;
- bcrmf@1 {
- compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
+ ulpi {
+ phy@a {
+ status = "okay";
- brcm,drive-strength = <10>;
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
+};
- gpio-keys {
- compatible = "gpio-keys";
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3";
+ function = "normal";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
+ fuelgauge_pin: fuelgauge-int {
+ pins = "gpio9";
+ function = "normal";
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
};
- serial@f9960000 {
- status = "okay";
+ wlan_sleep_clk_pin: wl-sleep-clk {
+ pins = "gpio16";
+ function = "func2";
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart10_pin_a>;
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <3000000>;
+ wlan_regulator_pin: wl-reg-active {
+ pins = "gpio17";
+ function = "normal";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_pin>;
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
- host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
- };
+ otg {
+ gpio-hog;
+ gpios = <35 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "otg-gpio";
};
+};
- i2c@f9967000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c11_pins>;
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
+&rpm_requests {
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
- led-controller@38 {
- compatible = "ti,lm3630a";
- status = "okay";
- reg = <0x38>;
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
- led@0 {
- reg = <0>;
- led-sources = <0 1>;
- label = "lcd-backlight";
- default-brightness = <200>;
- };
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
};
- };
- i2c@f9968000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c12_pins>;
- clock-frequency = <100000>;
- qcom,src-freq = <50000000>;
-
- mpu6515@68 {
- compatible = "invensense,mpu6515";
- reg = <0x68>;
- interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
- vddio-supply = <&pm8941_lvs1>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&mpu6515_pin>;
-
- mount-matrix = "0", "-1", "0",
- "-1", "0", "0",
- "0", "0", "1";
-
- i2c-gate {
- #address-cells = <1>;
- #size-cells = <0>;
- ak8963@f {
- compatible = "asahi-kasei,ak8963";
- reg = <0x0f>;
- gpios = <&msmgpio 67 0>;
- vid-supply = <&pm8941_lvs1>;
- vdd-supply = <&pm8941_l17>;
- };
-
- bmp280@76 {
- compatible = "bosch,bmp280";
- reg = <0x76>;
- vdda-supply = <&pm8941_lvs1>;
- vddd-supply = <&pm8941_l17>;
- };
- };
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <815000>;
+ regulator-max-microvolt = <900000>;
};
};
- i2c@f9923000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- clock-frequency = <100000>;
- qcom,src-freq = <50000000>;
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- charger: bq24192@6b {
- compatible = "ti,bq24192";
- reg = <0x6b>;
- interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
- omit-battery-class;
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- usb_otg_vbus: usb-otg-vbus { };
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
};
- fuelgauge: max17048@36 {
- compatible = "maxim,max17048";
- reg = <0x36>;
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
- maxim,double-soc;
- maxim,rcomp = /bits/ 8 <0x4d>;
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
- interrupt-parent = <&msmgpio>;
- interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&fuelgauge_pin>;
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- maxim,alert-low-soc-level = <2>;
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
};
- };
- i2c@f9924000 {
- status = "okay";
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- synaptics@70 {
- compatible = "syna,rmi4-i2c";
- reg = <0x70>;
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&touch_pin>;
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- };
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
};
- };
- i2c@f9925000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
- clock-frequency = <100000>;
- qcom,src-freq = <50000000>;
-
- avago_apds993@39 {
- compatible = "avago,apds9930";
- reg = <0x39>;
- interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
- vdd-supply = <&pm8941_l17>;
- vddio-supply = <&pm8941_lvs1>;
- led-max-microamp = <100000>;
- amstaos,proximity-diodes = <0>;
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
};
- };
- usb@f9a55000 {
- status = "okay";
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
- extcon = <&charger>, <&usb_id>;
- vbus-supply = <&usb_otg_vbus>;
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
- hnp-disable;
- srp-disable;
- adp-disable;
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
- ulpi {
- phy@a {
- status = "okay";
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
};
+
+ pm8941_lvs1: lvs1 {};
+ pm8941_lvs3: lvs3 {};
};
+};
- mdss@fd900000 {
- status = "okay";
+&sdhc_1 {
+ status = "okay";
- mdp@fd900000 {
- status = "okay";
- };
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
- dsi@fd922800 {
- status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
- vdda-supply = <&pm8941_l2>;
- vdd-supply = <&pm8941_lvs3>;
- vddio-supply = <&pm8941_l12>;
+&sdhc_2 {
+ status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8941_s3>;
+ non-removable;
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
- panel: panel@0 {
- reg = <0>;
- compatible = "lg,acx467akm-7";
+ bcrmf@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pin>;
+ brcm,drive-strength = <10>;
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ };
+};
+
+&tlmm {
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
};
- dsi-phy@fd922a00 {
- status = "okay";
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
- vddio-supply = <&pm8941_l12>;
+ sdc2_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
};
};
-};
-&spmi_bus {
- pm8941@0 {
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3";
- function = "normal";
+ mpu6515_pin: mpu6515 {
+ pins = "gpio73";
+ function = "gpio";
+ bias-disable;
+ input-enable;
+ };
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
+ touch_pin: touch {
+ int {
+ pins = "gpio5";
+ function = "gpio";
- fuelgauge_pin: fuelgauge-int {
- pins = "gpio9";
- function = "normal";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
- bias-disable;
- input-enable;
- power-source = <PM8941_GPIO_S3>;
- };
+ reset {
+ pins = "gpio8";
+ function = "gpio";
- wlan_sleep_clk_pin: wl-sleep-clk {
- pins = "gpio16";
- function = "func2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
- output-high;
- power-source = <PM8941_GPIO_S3>;
- };
+ panel_pin: panel {
+ pins = "gpio12";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ };
- wlan_regulator_pin: wl-reg-active {
- pins = "gpio17";
- function = "normal";
+ bt_pin: bt {
+ hostwake {
+ pins = "gpio42";
+ function = "gpio";
+ };
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- };
+ devwake {
+ pins = "gpio62";
+ function = "gpio";
+ };
- otg {
- gpio-hog;
- gpios = <35 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "otg-gpio";
- };
+ shutdown {
+ pins = "gpio41";
+ function = "gpio";
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
deleted file mode 100644
index 96e1c978b878..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ /dev/null
@@ -1,908 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pma8084.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/leds/common.h>
-
-/ {
- model = "Samsung Galaxy S5";
- compatible = "samsung,klte", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart1;
- mmc0 = &sdhc_1; /* SDC1 eMMC slot */
- mmc1 = &sdhc_2; /* SDC2 SD card slot */
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- smd {
- rpm {
- rpm_requests {
- pma8084-regulators {
- compatible = "qcom,rpm-pma8084-regulators";
- status = "okay";
-
- pma8084_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- };
-
- pma8084_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_s3: s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_s5: s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- pma8084_s6: s6 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l3: l3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l4: l4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l10: l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pma8084_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pma8084_l17: l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l19: l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pma8084_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pma8084_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l23: l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pma8084_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pma8084_l25: l25 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- };
-
- pma8084_l26: l26 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l27: l27 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_lvs1: lvs1 {};
- pma8084_lvs2: lvs2 {};
- pma8084_lvs3: lvs3 {};
- pma8084_lvs4: lvs4 {};
-
- pma8084_5vs1: 5vs1 {};
- };
- };
- };
- };
-
- i2c-gpio-touchkey {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_touchkey_pins>;
-
- touchkey@20 {
- compatible = "cypress,tm2-touchkey";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchkey_pin>;
-
- vcc-supply = <&max77826_ldo15>;
- vdd-supply = <&pma8084_l19>;
-
- linux,keycodes = <KEY_APPSELECT KEY_BACK>;
- };
- };
-
- i2c-gpio-led {
- compatible = "i2c-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_led_gpioex_pins>;
-
- i2c-gpio,delay-us = <2>;
-
- gpio_expander: gpio@20 {
- compatible = "nxp,pcal6416";
- reg = <0x20>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- vcc-supply = <&pma8084_s4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpioex_pin>;
-
- reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
- };
-
- led-controller@30 {
- compatible = "panasonic,an30259a";
- reg = <0x30>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@1 {
- reg = <1>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@2 {
- reg = <2>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@3 {
- reg = <3>;
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vreg_panel: panel-regulator {
- compatible = "regulator-fixed";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_en_pin>;
-
- regulator-name = "panel-vddr-reg";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- /delete-node/ vreg-boost;
-
- adsp-pil {
- cx-supply = <&pma8084_s2>;
- };
-};
-
-&soc {
- serial@f991e000 {
- status = "okay";
- };
-
- /* blsp2_uart8 */
- serial@f995e000 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart8_pins_active>;
- pinctrl-1 = <&blsp2_uart8_pins_sleep>;
-
- bluetooth {
- compatible = "brcm,bcm43540-bt";
- max-speed = <3000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_pins>;
- device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&msmgpio>;
- interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- home-key {
- label = "home_key";
- gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_HOMEPAGE>;
- wakeup-source;
- debounce-interval = <15>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
- pinctrl@fd510000 {
- blsp2_uart8_pins_active: blsp2-uart8-pins-active {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "blsp_uart8";
- drive-strength = <8>;
- bias-disable;
- };
-
- blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- bt_pins: bt-pins {
- hostwake {
- pins = "gpio75";
- function = "gpio";
- drive-strength = <16>;
- input-enable;
- };
-
- devwake {
- pins = "gpio91";
- function = "gpio";
- drive-strength = <2>;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <4>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <4>;
- bias-pull-up;
- };
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk-cmd-data {
- pins = "gpio35", "gpio36", "gpio37", "gpio38",
- "gpio39", "gpio40";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- sdhc2_cd_pin: sdhc2-cd {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc3_pin_a: sdhc3-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c6_pins: i2c6 {
- mux {
- pins = "gpio29", "gpio30";
- function = "blsp_i2c6";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c12_pins: i2c12 {
- mux {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c_touchkey_pins: i2c-touchkey {
- mux {
- pins = "gpio95", "gpio96";
- function = "gpio";
- input-enable;
- bias-pull-up;
- };
- };
-
- i2c_led_gpioex_pins: i2c-led-gpioex {
- mux {
- pins = "gpio120", "gpio121";
- function = "gpio";
- input-enable;
- bias-pull-down;
- };
- };
-
- gpioex_pin: gpioex {
- res {
- pins = "gpio145";
- function = "gpio";
-
- bias-pull-up;
- drive-strength = <2>;
- };
- };
-
- wifi_pin: wifi {
- int {
- pins = "gpio92";
- function = "gpio";
-
- input-enable;
- bias-pull-down;
- };
- };
-
- panel_te_pin: panel {
- te {
- pins = "gpio12";
- function = "mdp_vsync";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
- };
-
- sdhc_1: sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pma8084_l20>;
- vqmmc-supply = <&pma8084_s4>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhc_2: sdhci@f9864900 {
- status = "okay";
-
- max-frequency = <100000000>;
-
- vmmc-supply = <&pma8084_l21>;
- vqmmc-supply = <&pma8084_l13>;
-
- bus-width = <4>;
-
- /* cd-gpio is intentionally disabled. If enabled, an SD card
- * present during boot is not initialized correctly. Without
- * cd-gpios the driver resorts to polling, so hotplug works.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
- // cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- max-frequency = <100000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_pin_a>;
-
- vmmc-supply = <&vreg_wlan>;
- vqmmc-supply = <&pma8084_s4>;
-
- bus-width = <4>;
- non-removable;
-
- wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
-
- interrupt-parent = <&msmgpio>;
- interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
- };
- };
-
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- /*extcon = <&smbb>, <&usb_id>;*/
- /*vbus-supply = <&chg_otg>;*/
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pma8084_l6>;
- v3p3-supply = <&pma8084_l24>;
-
- /*extcon = <&smbb>;*/
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-
- i2c@f9924000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- touchscreen@20 {
- compatible = "syna,rmi4-i2c";
- reg = <0x20>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
- vdd-supply = <&max77826_ldo13>;
- vio-supply = <&pma8084_lvs2>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&touch_pin>;
-
- syna,startup-delay-ms = <100>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- };
- };
- };
-
- i2c@f9928000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
-
- pmic@60 {
- reg = <0x60>;
- compatible = "maxim,max77826";
-
- regulators {
- max77826_ldo1: LDO1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo2: LDO2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- max77826_ldo3: LDO3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo4: LDO4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo5: LDO5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo6: LDO6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo7: LDO7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo8: LDO8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo9: LDO9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo10: LDO10 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo11: LDO11 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo12: LDO12 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo13: LDO13 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo14: LDO14 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo15: LDO15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_buck: BUCK {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- max77826_buckboost: BUCKBOOST {
- regulator-min-microvolt = <3400000>;
- regulator-max-microvolt = <3400000>;
- };
- };
- };
- };
-
- i2c@f9968000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c12_pins>;
-
- fuelgauge@36 {
- compatible = "maxim,max17048";
- reg = <0x36>;
-
- maxim,double-soc;
- maxim,rcomp = /bits/ 8 <0x56>;
-
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&fuelgauge_pin>;
- };
- };
-
- adreno@fdb00000 {
- status = "ok";
- };
-
- mdss@fd900000 {
- status = "ok";
-
- mdp@fd900000 {
- status = "ok";
- };
-
- dsi@fd922800 {
- status = "ok";
-
- vdda-supply = <&pma8084_l2>;
- vdd-supply = <&pma8084_l22>;
- vddio-supply = <&pma8084_l12>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
-
- panel: panel@0 {
- reg = <0>;
- compatible = "samsung,s6e3fa2";
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
-
- iovdd-supply = <&pma8084_lvs4>;
- vddr-supply = <&vreg_panel>;
-
- reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
- te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
- };
-
- dsi-phy@fd922a00 {
- status = "ok";
-
- vddio-supply = <&pma8084_l12>;
- };
- };
-
- remoteproc@fc880000 {
- cx-supply = <&pma8084_s2>;
- mss-supply = <&pma8084_s6>;
- mx-supply = <&pma8084_s1>;
- pll-supply = <&pma8084_l12>;
- };
-};
-
-&spmi_bus {
- pma8084@0 {
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touchkey_pin: touchkey-int-pin {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- touch_pin: touchscreen-int-pin {
- pins = "gpio8";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
-
- panel_en_pin: panel-en-pin {
- pins = "gpio14";
- function = "normal";
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
- wlan_sleep_clk_pin: wlan-sleep-clk-pin {
- pins = "gpio16";
- function = "func2";
-
- output-high;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
-
- panel_rst_pin: panel-rst-pin {
- pins = "gpio17";
- function = "normal";
- bias-disable;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
-
-
- fuelgauge_pin: fuelgauge-int-pin {
- pins = "gpio21";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
deleted file mode 100644
index 79e2cfbbb1ba..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
+++ /dev/null
@@ -1,435 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- model = "Sony Xperia Z1 Compact";
- compatible = "sony,xperia-amami", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
- memory@0 {
- reg = <0 0x40000000>, <0x40000000 0x40000000>;
- device_type = "memory";
- };
-
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-system-load = <200000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
-};
-
-&soc {
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- bus-width = <4>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- };
-
- serial@f991e000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
- };
-
-
- pinctrl@fd510000 {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
- };
-
- dma-controller@f9944000 {
- qcom,controlled-remotely;
- };
-
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- charger@1000 {
- qcom,fast-charge-safe-current = <1300000>;
- qcom,fast-charge-current-limit = <1300000>;
- qcom,dc-current-limit = <1300000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
- };
-
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio4", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
- };
-
- coincell@2800 {
- status = "okay";
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
- };
- };
-
- pm8941@1 {
- wled@d800 {
- status = "okay";
-
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
deleted file mode 100644
index e66937e3f7dd..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts
+++ /dev/null
@@ -1,723 +0,0 @@
-#include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- model = "Sony Xperia Z2 Tablet";
- compatible = "sony,xperia-castor", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- serial1 = &blsp2_uart7;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
- smd {
- rpm {
- rpm_requests {
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-system-load = <154000>;
- };
-
- s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-allow-set-load;
- regulator-system-load = <500000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
-
- vreg_bl_vddio: lcd-backlight-vddio {
- compatible = "regulator-fixed";
- regulator-name = "vreg_bl_vddio";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- gpio = <&msmgpio 69 0>;
- enable-active-high;
-
- vin-supply = <&pm8941_s3>;
- startup-delay-us = <70000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_backlight_en_pin_a>;
- };
-
- vreg_vsp: lcd-dcdc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_vsp";
- regulator-min-microvolt = <5600000>;
- regulator-max-microvolt = <5600000>;
-
- gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_dcdc_en_pin_a>;
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_regulator_pin>;
- };
-};
-
-&soc {
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f9864900 {
- status = "okay";
-
- max-frequency = <100000000>;
- non-removable;
- vmmc-supply = <&vreg_wlan>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_pin_a>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- bcrmf@1 {
- compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- brcm,drive-strength = <10>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin>;
- };
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- bus-width = <4>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- };
-
- serial@f991e000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
- };
-
- serial@f995d000 {
- status = "ok";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp2_uart7_pin_a>;
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <3000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_pin>,
- <&bt_dev_wake_pin>,
- <&bt_reg_on_pin>;
-
- host-wakeup-gpios = <&msmgpio 95 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&msmgpio 96 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
- };
- };
-
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-
- pinctrl@fd510000 {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- blsp2_uart7_pin_a: blsp2-uart7-pin-active {
- tx {
- pins = "gpio41";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio42";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- cts {
- pins = "gpio43";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- rts {
- pins = "gpio44";
- function = "blsp_uart7";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c8_pins: i2c8 {
- mux {
- pins = "gpio47", "gpio48";
- function = "blsp_i2c8";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c11_pins: i2c11 {
- mux {
- pins = "gpio83", "gpio84";
- function = "blsp_i2c11";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- lcd_backlight_en_pin_a: lcd-backlight-vddio {
- pins = "gpio69";
- drive-strength = <10>;
- output-low;
- bias-disable;
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- sdhc3_pin_a: sdhc3-pin-active {
- clk {
- pins = "gpio40";
- function = "sdc3";
-
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd {
- pins = "gpio39";
- function = "sdc3";
-
- drive-strength = <10>;
- bias-pull-up;
- };
-
- data {
- pins = "gpio35", "gpio36", "gpio37", "gpio38";
- function = "sdc3";
-
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- ts_int_pin: synaptics {
- pin {
- pins = "gpio86";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
- };
-
- bt_host_wake_pin: bt-host-wake {
- pins = "gpio95";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- bt_dev_wake_pin: bt-dev-wake {
- pins = "gpio96";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- i2c@f9964000 {
- status = "okay";
-
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c8_pins>;
-
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupt-parent = <&msmgpio>;
- interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_pin>;
-
- syna,startup-delay-ms = <10>;
-
- rmi-f01@1 {
- reg = <0x1>;
- syna,nosleep = <1>;
- };
-
- rmi-f11@11 {
- reg = <0x11>;
- syna,f11-flip-x = <1>;
- syna,sensor-type = <1>;
- };
- };
- };
-
- i2c@f9967000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c11_pins>;
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
-
- lp8566_wled: backlight@2c {
- compatible = "ti,lp8556";
- reg = <0x2c>;
- power-supply = <&vreg_bl_vddio>;
-
- bl-name = "backlight";
- dev-ctrl = /bits/ 8 <0x05>;
- init-brt = /bits/ 8 <0x3f>;
- rom_a0h {
- rom-addr = /bits/ 8 <0xa0>;
- rom-val = /bits/ 8 <0xff>;
- };
- rom_a1h {
- rom-addr = /bits/ 8 <0xa1>;
- rom-val = /bits/ 8 <0x3f>;
- };
- rom_a2h {
- rom-addr = /bits/ 8 <0xa2>;
- rom-val = /bits/ 8 <0x20>;
- };
- rom_a3h {
- rom-addr = /bits/ 8 <0xa3>;
- rom-val = /bits/ 8 <0x5e>;
- };
- rom_a4h {
- rom-addr = /bits/ 8 <0xa4>;
- rom-val = /bits/ 8 <0x02>;
- };
- rom_a5h {
- rom-addr = /bits/ 8 <0xa5>;
- rom-val = /bits/ 8 <0x04>;
- };
- rom_a6h {
- rom-addr = /bits/ 8 <0xa6>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom_a7h {
- rom-addr = /bits/ 8 <0xa7>;
- rom-val = /bits/ 8 <0xf7>;
- };
- rom_a9h {
- rom-addr = /bits/ 8 <0xa9>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom_aah {
- rom-addr = /bits/ 8 <0xaa>;
- rom-val = /bits/ 8 <0x0f>;
- };
- rom_aeh {
- rom-addr = /bits/ 8 <0xae>;
- rom-val = /bits/ 8 <0x0f>;
- };
- };
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- charger@1000 {
- qcom,fast-charge-safe-current = <1500000>;
- qcom,fast-charge-current-limit = <1500000>;
- qcom,dc-current-limit = <1800000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
- };
-
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
-
- bt_reg_on_pin: bt-reg-on {
- pins = "gpio16";
- function = "normal";
-
- output-low;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_sleep_clk_pin: wl-sleep-clk {
- pins = "gpio17";
- function = "func2";
-
- output-high;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_regulator_pin: wl-reg-active {
- pins = "gpio18";
- function = "normal";
-
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- };
-
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
- pins = "gpio20";
- function = "normal";
-
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- input-disable;
- output-low;
- };
-
- };
-
- coincell@2800 {
- status = "okay";
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
deleted file mode 100644
index a62e5c25b23c..000000000000
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ /dev/null
@@ -1,484 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- model = "Sony Xperia Z1";
- compatible = "sony,xperia-honami", "qcom,msm8974";
-
- aliases {
- serial0 = &blsp1_uart2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
-
- volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- };
-
- camera-snapshot {
- label = "camera_snapshot";
- gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA>;
- };
-
- camera-focus {
- label = "camera_focus";
- gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_CAMERA_FOCUS>;
- };
-
- volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- };
- };
-
- memory@0 {
- reg = <0 0x40000000>, <0x40000000 0x40000000>;
- device_type = "memory";
- };
-
- smd {
- rpm {
- rpm_requests {
- pm8841-regulators {
- s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- pm8941-regulators {
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-always-on;
- regulator-boot-on;
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-boot-on;
- regulator-system-load = <200000>;
- };
-
- l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-boot-on;
- };
-
- l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
-
- regulator-boot-on;
- };
- };
- };
- };
- };
-};
-
-&soc {
- usb@f9a55000 {
- status = "okay";
-
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- ulpi {
- phy@a {
- status = "okay";
-
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
- };
- };
-
- sdhci@f9824900 {
- status = "okay";
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- bus-width = <8>;
- non-removable;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
- };
-
- sdhci@f98a4900 {
- status = "okay";
-
- bus-width = <4>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
- };
-
- serial@f991e000 {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&blsp1_uart2_pin_a>;
- };
-
- i2c@f9924000 {
- status = "okay";
-
- clock-frequency = <355000>;
- qcom,src-freq = <50000000>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_pin>;
-
- syna,startup-delay-ms = <10>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-x;
- syna,sensor-type = <1>;
- };
- };
- };
-
- pinctrl@fd510000 {
- blsp1_uart2_pin_a: blsp1-uart2-pin-active {
- rx {
- pins = "gpio5";
- function = "blsp_uart2";
-
- drive-strength = <2>;
- bias-pull-up;
- };
-
- tx {
- pins = "gpio4";
- function = "blsp_uart2";
-
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
-
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdhc2_cd_pin_a: sdhc2-cd-pin-active {
- pins = "gpio62";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- };
-
- sdhc2_pin_a: sdhc2-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
- };
-
- ts_int_pin: touch-int {
- pin {
- pins = "gpio61";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
- };
- };
-
- dma-controller@f9944000 {
- qcom,controlled-remotely;
- };
-};
-
-&spmi_bus {
- pm8941@0 {
- charger@1000 {
- qcom,fast-charge-safe-current = <1500000>;
- qcom,fast-charge-current-limit = <1500000>;
- qcom,dc-current-limit = <1800000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
- };
-
- gpios@c000 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio4", "gpio5";
- function = "normal";
-
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
- };
-
- coincell@2800 {
- status = "okay";
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
- };
- };
-
- pm8941@1 {
- wled@d800 {
- status = "okay";
-
- qcom,cs-out;
- qcom,current-limit = <20>;
- qcom,current-boost-limit = <805>;
- qcom,switching-freq = <1600>;
- qcom,ovp = <29>;
- qcom,num-strings = <2>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
new file mode 100644
index 000000000000..68d5626bf491
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-amami.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+ model = "Sony Xperia Z1 Compact";
+ compatible = "sony,xperia-amami", "qcom,msm8974";
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1300000>;
+ qcom,fast-charge-current-limit = <1300000>;
+ qcom,dc-current-limit = <1300000>;
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
new file mode 100644
index 000000000000..ea6a941d8f8c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine-honami.dts
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974-sony-xperia-rhine.dtsi"
+
+/ {
+ model = "Sony Xperia Z1";
+ compatible = "sony,xperia-honami", "qcom,msm8974";
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
new file mode 100644
index 000000000000..1d21de46f85c
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ramoops@3e8e0000 {
+ compatible = "ramoops";
+ reg = <0x3e8e0000 0x200000>;
+
+ console-size = <0x100000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x80000>;
+ };
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+
+ interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_pin>;
+
+ syna,startup-delay-ms = <10>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-x;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ nfc@28 {
+ compatible = "nxp,pn544-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <59 IRQ_TYPE_EDGE_RISING>;
+
+ enable-gpios = <&pm8941_gpios 23 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_dma {
+ qcom,controlled-remotely;
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ /* sii8334 MHL HDMI bridge */
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+};
+
+&pm8941_coincell {
+ status = "okay";
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+};
+
+&pm8941_wled {
+ status = "okay";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+};
+
+&rpm_requests {
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s4: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+
+ pm8941_lvs3: lvs3 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+ ts_int_pin: touch-int {
+ pins = "gpio61";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 412d94736c35..814ad0b46232 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -12,61 +12,19 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
- model = "Qualcomm MSM8974";
- compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mpss_region: mpss@8000000 {
- reg = <0x08000000 0x5100000>;
- no-map;
- };
-
- mba_region: mba@d100000 {
- reg = <0x0d100000 0x100000>;
- no-map;
- };
-
- wcnss_region: wcnss@d200000 {
- reg = <0x0d200000 0xa00000>;
- no-map;
- };
-
- adsp_region: adsp@dc00000 {
- reg = <0x0dc00000 0x1900000>;
- no-map;
- };
-
- venus@f500000 {
- reg = <0x0f500000 0x500000>;
- no-map;
- };
-
- smem_region: smem@fa00000 {
- reg = <0xfa00000 0x200000>;
- no-map;
- };
-
- tz@fc00000 {
- reg = <0x0fc00000 0x160000>;
- no-map;
- };
-
- rfsa@fd60000 {
- reg = <0x0fd60000 0x20000>;
- no-map;
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
};
- rmtfs@fd80000 {
- compatible = "qcom,rmtfs-mem";
- reg = <0x0fd80000 0x180000>;
- no-map;
-
- qcom,client-id = <1>;
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
};
@@ -136,238 +94,75 @@
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 5>;
-
- trips {
- cpu_alert0: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit0: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 6>;
-
- trips {
- cpu_alert1: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit1: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 7>;
-
- trips {
- cpu_alert2: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit2: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 8>;
-
- trips {
- cpu_alert3: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit3: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ pmu {
+ compatible = "qcom,krait-pmu";
+ interrupts = <GIC_PPI 7 0xf04>;
+ };
- thermal-sensors = <&tsens 1>;
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- trips {
- q6_dsp_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ mpss_region: mpss@8000000 {
+ reg = <0x08000000 0x5100000>;
+ no-map;
};
- modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 2>;
-
- trips {
- modemtx_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ mba_region: mba@d100000 {
+ reg = <0x0d100000 0x100000>;
+ no-map;
};
- video-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 3>;
-
- trips {
- video_alert0: trip-point0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ wcnss_region: wcnss@d200000 {
+ reg = <0x0d200000 0xa00000>;
+ no-map;
};
- wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 4>;
-
- trips {
- wlan_alert0: trip-point0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ adsp_region: adsp@dc00000 {
+ reg = <0x0dc00000 0x1900000>;
+ no-map;
};
- gpu-top-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 9>;
-
- trips {
- gpu1_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ venus_region: memory@f500000 {
+ reg = <0x0f500000 0x500000>;
+ no-map;
};
- gpu-bottom-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens 10>;
-
- trips {
- gpu2_alert0: trip-point0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ smem_region: smem@fa00000 {
+ reg = <0xfa00000 0x200000>;
+ no-map;
};
- };
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <GIC_PPI 7 0xf04>;
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
+ tz_region: memory@fc00000 {
+ reg = <0x0fc00000 0x160000>;
+ no-map;
};
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
+ rfsa_mem: memory@fd60000 {
+ reg = <0x0fd60000 0x20000>;
+ no-map;
};
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 2 0xf08>,
- <GIC_PPI 3 0xf08>,
- <GIC_PPI 4 0xf08>,
- <GIC_PPI 1 0xf08>;
- clock-frequency = <19200000>;
- };
-
- adsp-pil {
- compatible = "qcom,msm8974-adsp-pil";
-
- interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- cx-supply = <&pm8841_s2>;
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_region>;
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 8>;
- qcom,smd-edge = <1>;
+ rmtfs@fd80000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0x0fd80000 0x180000>;
+ no-map;
- label = "lpass";
+ qcom,client-id = <1>;
};
};
@@ -497,11 +292,23 @@
};
};
- firmware {
- scm {
- compatible = "qcom,scm";
- clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
- clock-names = "core", "bus", "iface";
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests: rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+ };
};
};
@@ -524,31 +331,6 @@
reg = <0xf9011000 0x1000>;
};
- qfprom: qfprom@fc4bc000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "qcom,qfprom";
- reg = <0xfc4bc000 0x1000>;
- tsens_calib: calib@d0 {
- reg = <0xd0 0x18>;
- };
- tsens_backup: backup@440 {
- reg = <0x440 0x10>;
- };
- };
-
- tsens: thermal-sensor@fc4a9000 {
- compatible = "qcom,msm8974-tsens";
- reg = <0xfc4a9000 0x1000>, /* TM */
- <0xfc4a8000 0x1000>; /* SROT */
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- #qcom,sensors = <11>;
- interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow";
- #thermal-sensor-cells = <1>;
- };
-
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -654,47 +436,59 @@
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
+ sdhc_1: sdhci@f9824900 {
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ bus-width = <8>;
+ non-removable;
- gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8974";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x4000>;
+ status = "disabled";
};
- tcsr: syscon@fd4a0000 {
- compatible = "syscon";
- reg = <0xfd4a0000 0x10000>;
- };
+ sdhc_3: sdhci@f9864900 {
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC3_APPS_CLK>,
+ <&gcc GCC_SDCC3_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ bus-width = <4>;
- tcsr_mutex_block: syscon@fd484000 {
- compatible = "syscon";
- reg = <0xfd484000 0x2000>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- mmcc: clock-controller@fd8c0000 {
- compatible = "qcom,mmcc-msm8974";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfd8c0000 0x6000>;
+ status = "disabled";
};
- tcsr_mutex: tcsr-mutex {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_block 0 0x80>;
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+ bus-width = <4>;
- #hwlock-cells = <1>;
- };
+ #address-cells = <1>;
+ #size-cells = <0>;
- rpm_msg_ram: memory@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
+ status = "disabled";
};
blsp1_uart1: serial@f991d000 {
@@ -715,7 +509,73 @@
status = "disabled";
};
- blsp2_uart7: serial@f995d000 {
+ blsp1_i2c1: i2c@f9923000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9923000 0x1000>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c1_default>;
+ pinctrl-1 = <&blsp1_i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp1_i2c2: i2c@f9924000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9924000 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp1_i2c3: i2c@f9925000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9925000 0x1000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c3_default>;
+ pinctrl-1 = <&blsp1_i2c3_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp1_i2c6: i2c@f9928000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9928000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c6_default>;
+ pinctrl-1 = <&blsp1_i2c6_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ blsp2_dma: dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ blsp2_uart1: serial@f995d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995d000 0x1000>;
interrupts = <GIC_SPI 113 IRQ_TYPE_NONE>;
@@ -724,7 +584,7 @@
status = "disabled";
};
- blsp2_uart8: serial@f995e000 {
+ blsp2_uart2: serial@f995e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf995e000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -733,7 +593,7 @@
status = "disabled";
};
- blsp2_uart10: serial@f9960000 {
+ blsp2_uart4: serial@f9960000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf9960000 0x1000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
@@ -742,46 +602,45 @@
status = "disabled";
};
- sdhci@f9824900 {
- compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
- reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ blsp2_i2c2: i2c@f9964000 {
status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9964000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c2_default>;
+ pinctrl-1 = <&blsp2_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- sdhci@f9864900 {
- compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
- reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC3_APPS_CLK>,
- <&gcc GCC_SDCC3_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ blsp2_i2c5: i2c@f9967000 {
status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9967000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c5_default>;
+ pinctrl-1 = <&blsp2_i2c5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
- sdhci@f98a4900 {
- compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
+ blsp2_i2c6: i2c@f9968000 {
status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9968000 0x1000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
otg: usb@f9a55000 {
@@ -835,55 +694,6 @@
clock-names = "core";
};
- remoteproc@fc880000 {
- compatible = "qcom,msm8974-mss-pil";
- reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
- reg-names = "qdsp6", "rmb";
-
- interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
- clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
- <&gcc GCC_MSS_CFG_AHB_CLK>,
- <&gcc GCC_BOOT_ROM_AHB_CLK>,
- <&xo_board>;
- clock-names = "iface", "bus", "mem", "xo";
-
- resets = <&gcc GCC_MSS_RESTART>;
- reset-names = "mss_restart";
-
- cx-supply = <&pm8841_s2>;
- mss-supply = <&pm8841_s3>;
- mx-supply = <&pm8841_s1>;
- pll-supply = <&pm8941_l12>;
-
- qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
-
- qcom,smem-states = <&modem_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- mba {
- memory-region = <&mba_region>;
- };
-
- mpss {
- memory-region = <&mpss_region>;
- };
-
- smd-edge {
- interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 8 12>;
- qcom,smd-edge = <0>;
-
- label = "modem";
- };
- };
-
pronto: remoteproc@fb21b000 {
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
@@ -898,8 +708,6 @@
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
- vddpx-supply = <&pm8941_s3>;
-
qcom,smem-states = <&wcnss_smp2p_out 0>;
qcom,smem-state-names = "stop";
@@ -910,11 +718,6 @@
clocks = <&rpmcc RPM_SMD_CXO_A2>;
clock-names = "xo";
-
- vddxo-supply = <&pm8941_l6>;
- vddrfa-supply = <&pm8941_l11>;
- vddpa-supply = <&pm8941_l19>;
- vdddig-supply = <&pm8941_s3>;
};
smd-edge {
@@ -942,139 +745,32 @@
interrupt-names = "tx", "rx";
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
- qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ qcom,smem-state-names = "tx-enable",
+ "tx-rings-empty";
};
};
};
};
- msmgpio: pinctrl@fd510000 {
- compatible = "qcom,msm8974-pinctrl";
- reg = <0xfd510000 0x4000>;
- gpio-controller;
- gpio-ranges = <&msmgpio 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- i2c@f9923000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9923000 0x1000>;
- interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- i2c@f9924000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9924000 0x1000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- blsp_i2c3: i2c@f9925000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9925000 0x1000>;
- interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- blsp_i2c6: i2c@f9928000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9928000 0x1000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- blsp_i2c8: i2c@f9964000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9964000 0x1000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- blsp_i2c11: i2c@f9967000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9967000 0x1000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
- dma-names = "tx", "rx";
- };
-
- blsp_i2c12: i2c@f9968000 {
- status = "disabled";
- compatible = "qcom,i2c-qup-v2.1.1";
- reg = <0xf9968000 0x1000>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spmi_bus: spmi@fc4cf000 {
- compatible = "qcom,spmi-pmic-arb";
- reg-names = "core", "intr", "cnfg";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- blsp2_dma: dma-controller@f9944000 {
- compatible = "qcom,bam-v1.4.0";
- reg = <0xf9944000 0x19000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- etr@fc322000 {
+ etf@fc307000 {
compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0xfc322000 0x1000>;
+ reg = <0xfc307000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint = <&replicator_in>;
+ };
+ };
+ };
+
in-ports {
port {
- etr_in: endpoint {
- remote-endpoint = <&replicator_out0>;
+ etf_in: endpoint {
+ remote-endpoint = <&merger_out>;
};
};
};
@@ -1096,59 +792,39 @@
};
};
- replicator@fc31c000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0xfc31c000 0x1000>;
+ funnel@fc31a000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0xfc31a000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- out-ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint = <&etr_in>;
- };
- };
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint = <&tpiu_in>;
- };
- };
- };
-
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint = <&etf_out>;
+ /*
+ * Not described input ports:
+ * 0 - not-connected
+ * 1 - connected trought funnel to Multimedia CPU
+ * 2 - connected to Wireless CPU
+ * 3 - not-connected
+ * 4 - not-connected
+ * 6 - not-connected
+ * 7 - connected to STM
+ */
+ port@5 {
+ reg = <5>;
+ funnel1_in5: endpoint {
+ remote-endpoint = <&kpss_out>;
};
};
};
- };
-
- etf@fc307000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0xfc307000 0x1000>;
-
- clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
out-ports {
port {
- etf_out: endpoint {
- remote-endpoint = <&replicator_in>;
- };
- };
- };
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint = <&merger_out>;
+ funnel1_out: endpoint {
+ remote-endpoint = <&merger_in1>;
};
};
};
@@ -1188,85 +864,51 @@
};
};
- funnel@fc31a000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0xfc31a000 0x1000>;
+ replicator@fc31c000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0xfc31c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- in-ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /*
- * Not described input ports:
- * 0 - not-connected
- * 1 - connected trought funnel to Multimedia CPU
- * 2 - connected to Wireless CPU
- * 3 - not-connected
- * 4 - not-connected
- * 6 - not-connected
- * 7 - connected to STM
- */
- port@5 {
- reg = <5>;
- funnel1_in5: endpoint {
- remote-endpoint = <&kpss_out>;
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
};
};
};
- out-ports {
+ in-ports {
port {
- funnel1_out: endpoint {
- remote-endpoint = <&merger_in1>;
+ replicator_in: endpoint {
+ remote-endpoint = <&etf_out>;
};
};
};
};
- funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0xfc345000 0x1000>;
+ etr@fc322000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0xfc322000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- kpss_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
- port@1 {
- reg = <1>;
- kpss_in1: endpoint {
- remote-endpoint = <&etm1_out>;
- };
- };
- port@2 {
- reg = <2>;
- kpss_in2: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
- port@3 {
- reg = <3>;
- kpss_in3: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
-
- out-ports {
port {
- kpss_out: endpoint {
- remote-endpoint = <&funnel1_in5>;
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
};
};
};
@@ -1344,25 +986,66 @@
};
};
- ocmem@fdd00000 {
- compatible = "qcom,msm8974-ocmem";
- reg = <0xfdd00000 0x2000>,
- <0xfec00000 0x180000>;
- reg-names = "ctrl",
- "mem";
- clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
- <&mmcc OCMEMCX_OCMEMNOC_CLK>;
- clock-names = "core",
- "iface";
+ /* KPSS funnel, only 4 inputs are used */
+ funnel@fc345000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0xfc345000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
+ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- gmu_sram: gmu-sram@0 {
- reg = <0x0 0x100000>;
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ kpss_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ kpss_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ kpss_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+ port@3 {
+ reg = <3>;
+ kpss_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ kpss_out: endpoint {
+ remote-endpoint = <&funnel1_in5>;
+ };
+ };
};
};
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-msm8974";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfc400000 0x4000>;
+ };
+
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
bimc: interconnect@fc380000 {
reg = <0xfc380000 0x6a000>;
compatible = "qcom,msm8974-bimc";
@@ -1417,94 +1100,378 @@
<&rpmcc RPM_SMD_CNOC_A_CLK>;
};
- gpu: adreno@fdb00000 {
- status = "disabled";
+ tsens: thermal-sensor@fc4a9000 {
+ compatible = "qcom,msm8974-tsens";
+ reg = <0xfc4a9000 0x1000>, /* TM */
+ <0xfc4a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ #qcom,sensors = <11>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
+ #thermal-sensor-cells = <1>;
+ };
- compatible = "qcom,adreno-330.1",
- "qcom,adreno";
- reg = <0xfdb00000 0x10000>;
- reg-names = "kgsl_3d0_reg_memory";
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "kgsl_3d0_irq";
- clock-names = "core",
- "iface",
- "mem_iface";
- clocks = <&mmcc OXILI_GFX3D_CLK>,
- <&mmcc OXILICX_AHB_CLK>,
- <&mmcc OXILICX_AXI_CLK>;
- sram = <&gmu_sram>;
- power-domains = <&mmcc OXILICX_GDSC>;
- operating-points-v2 = <&gpu_opp_table>;
+ restart@fc4ab000 {
+ compatible = "qcom,pshold";
+ reg = <0xfc4ab000 0x4>;
+ };
- interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
- <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
- interconnect-names = "gfx-mem",
- "ocmem";
+ qfprom: qfprom@fc4bc000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "qcom,qfprom";
+ reg = <0xfc4bc000 0x1000>;
+ tsens_calib: calib@d0 {
+ reg = <0xd0 0x18>;
+ };
+ tsens_backup: backup@440 {
+ reg = <0x440 0x10>;
+ };
+ };
- // iommus = <&gpu_iommu 0>;
+ spmi_bus: spmi@fc4cf000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg-names = "core", "intr", "cnfg";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
- gpu_opp_table: opp_table {
- compatible = "operating-points-v2";
+ remoteproc_mss: remoteproc@fc880000 {
+ compatible = "qcom,msm8974-mss-pil";
+ reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
+ reg-names = "qdsp6", "rmb";
- opp-320000000 {
- opp-hz = /bits/ 64 <320000000>;
+ interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "iface", "bus", "mem", "xo";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 12>;
+ qcom,smd-edge = <0>;
+
+ label = "modem";
+ };
+ };
+
+ tcsr_mutex_block: syscon@fd484000 {
+ compatible = "syscon";
+ reg = <0xfd484000 0x2000>;
+ };
+
+ tcsr: syscon@fd4a0000 {
+ compatible = "syscon";
+ reg = <0xfd4a0000 0x10000>;
+ };
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8974-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ sdc1_off: sdc1-off {
+ clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
};
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
+ cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
};
- opp-27000000 {
- opp-hz = /bits/ 64 <27000000>;
+ data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ cd {
+ pins = "gpio54";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp1_uart2_active: blsp1-uart2-active {
+ rx {
+ pins = "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ tx {
+ pins = "gpio4";
+ function = "blsp_uart2";
+ drive-strength = <4>;
+ bias-disable;
+ };
+ };
+
+ blsp2_uart1_active: blsp2-uart1-active {
+ tx-rts {
+ pins = "gpio41", "gpio44";
+ function = "blsp_uart7";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-cts {
+ pins = "gpio42", "gpio43";
+ function = "blsp_uart7";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ blsp2_uart1_sleep: blsp2-uart1-sleep {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ blsp2_uart4_active: blsp2-uart4-active {
+ tx-rts {
+ pins = "gpio53", "gpio56";
+ function = "blsp_uart10";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-cts {
+ pins = "gpio54", "gpio55";
+ function = "blsp_uart10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ blsp1_i2c1_default: blsp1-i2c1-default {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+ pins = "gpio2", "gpio3";
+ function = "blsp_i2c1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c2_default: blsp1-i2c2-default {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ blsp1_i2c3_default: blsp1-i2c3-default {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP1_I2C4 info is missing */
+
+ /* BLSP1_I2C5 info is missing */
+
+ blsp1_i2c6_default: blsp1-i2c6-default {
+ pins = "gpio29", "gpio30";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+ pins = "gpio29", "gpio30";
+ function = "blsp_i2c6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ /* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
+
+ /* BLSP2_I2C1 info is missing */
+
+ blsp2_i2c2_default: blsp2-i2c2-default {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+ pins = "gpio47", "gpio48";
+ function = "blsp_i2c8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP2_I2C3 info is missing */
+
+ /* BLSP2_I2C4 info is missing */
+
+ blsp2_i2c5_default: blsp2-i2c5-default {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ /* BLSP2_I2C6 info is missing - nobody uses it though? */
+
+ spi8_default: spi8_default {
+ mosi {
+ pins = "gpio45";
+ function = "blsp_spi8";
+ };
+ miso {
+ pins = "gpio46";
+ function = "blsp_spi8";
+ };
+ cs {
+ pins = "gpio47";
+ function = "blsp_spi8";
+ };
+ clk {
+ pins = "gpio48";
+ function = "blsp_spi8";
};
};
};
- mdss: mdss@fd900000 {
- status = "disabled";
+ mmcc: clock-controller@fd8c0000 {
+ compatible = "qcom,mmcc-msm8974";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0xfd8c0000 0x6000>;
+ };
+ mdss: mdss@fd900000 {
compatible = "qcom,mdss";
- reg = <0xfd900000 0x100>,
- <0xfd924000 0x1000>;
- reg-names = "mdss_phys",
- "vbif_phys";
+ reg = <0xfd900000 0x100>, <0xfd924000 0x1000>;
+ reg-names = "mdss_phys", "vbif_phys";
power-domains = <&mmcc MDSS_GDSC>;
clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "vsync";
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "vsync";
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
+ status = "disabled";
+
#address-cells = <1>;
#size-cells = <1>;
ranges;
mdp: mdp@fd900000 {
- status = "disabled";
-
compatible = "qcom,mdp5";
reg = <0xfd900100 0x22000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 0>;
+ interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "vsync";
+ clock-names = "iface", "bus", "core", "vsync";
interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
interconnect-names = "mdp0-mem";
@@ -1523,38 +1490,39 @@
};
dsi0: dsi@fd922800 {
- status = "disabled";
-
compatible = "qcom,mdss-dsi-ctrl";
reg = <0xfd922800 0x1f8>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
- assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
- <&mmcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi_phy0 0>,
- <&dsi_phy0 1>;
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_BYTE0_CLK>,
- <&mmcc MDSS_PCLK0_CLK>,
- <&mmcc MDSS_ESC0_CLK>,
- <&mmcc MMSS_MISC_AHB_CLK>;
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>;
clock-names = "mdp_core",
- "iface",
- "bus",
- "byte",
- "pixel",
- "core",
- "core_mmss";
-
- phys = <&dsi_phy0>;
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core",
+ "core_mmss";
+
+ phys = <&dsi0_phy>;
phy-names = "dsi-phy";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1574,28 +1542,115 @@
};
};
- dsi_phy0: dsi-phy@fd922a00 {
- status = "disabled";
-
+ dsi0_phy: dsi-phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x280>,
<0xfd922d80 0x30>;
reg-names = "dsi_pll",
- "dsi_phy",
- "dsi_phy_regulator";
+ "dsi_phy",
+ "dsi_phy_regulator";
#clock-cells = <1>;
#phy-cells = <0>;
- qcom,dsi-phy-index = <0>;
clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
clock-names = "iface", "ref";
+
+ status = "disabled";
};
};
- imem@fe805000 {
+ gpu: adreno@fdb00000 {
+ compatible = "qcom,adreno-330.1", "qcom,adreno";
+ reg = <0xfdb00000 0x10000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "kgsl_3d0_irq";
+
+ clocks = <&mmcc OXILI_GFX3D_CLK>,
+ <&mmcc OXILICX_AHB_CLK>,
+ <&mmcc OXILICX_AXI_CLK>;
+ clock-names = "core", "iface", "mem_iface";
+
+ sram = <&gmu_sram>;
+ power-domains = <&mmcc OXILICX_GDSC>;
+ operating-points-v2 = <&gpu_opp_table>;
+
+ interconnects = <&mmssnoc MNOC_MAS_GRAPHICS_3D &bimc BIMC_SLV_EBI_CH0>,
+ <&ocmemnoc OCMEM_VNOC_MAS_GFX3D &ocmemnoc OCMEM_SLV_OCMEM>;
+ interconnect-names = "gfx-mem", "ocmem";
+
+ // iommus = <&gpu_iommu 0>;
+
status = "disabled";
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-320000000 {
+ opp-hz = /bits/ 64 <320000000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-27000000 {
+ opp-hz = /bits/ 64 <27000000>;
+ };
+ };
+ };
+
+ ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x180000>;
+ reg-names = "ctrl", "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x100000>;
+ };
+ };
+
+ remoteproc_adsp: remoteproc@fe200000 {
+ compatible = "qcom,msm8974-adsp-pil";
+ reg = <0xfe200000 0x100>;
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,ipc = <&apcs 8 8>;
+ qcom,smd-edge = <1>;
+ label = "lpass";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ imem: imem@fe805000 {
compatible = "syscon", "simple-mfd";
reg = <0xfe805000 0x1000>;
@@ -1606,76 +1661,194 @@
};
};
- smd {
- compatible = "qcom,smd";
+ tcsr_mutex: tcsr-mutex {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_block 0 0x80>;
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
+ #hwlock-cells = <1>;
+ };
- rpm_requests {
- compatible = "qcom,rpm-msm8974";
- qcom,smd-channels = "rpm_requests";
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
- #clock-cells = <1>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ q6_dsp_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
+ };
+ };
- pm8841-regulators {
- compatible = "qcom,rpm-pm8841-regulators";
-
- pm8841_s1: s1 {};
- pm8841_s2: s2 {};
- pm8841_s3: s3 {};
- pm8841_s4: s4 {};
- pm8841_s5: s5 {};
- pm8841_s6: s6 {};
- pm8841_s7: s7 {};
- pm8841_s8: s8 {};
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ modemtx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- pm8941-regulators {
- compatible = "qcom,rpm-pm8941-regulators";
-
- pm8941_s1: s1 {};
- pm8941_s2: s2 {};
- pm8941_s3: s3 {};
-
- pm8941_l1: l1 {};
- pm8941_l2: l2 {};
- pm8941_l3: l3 {};
- pm8941_l4: l4 {};
- pm8941_l5: l5 {};
- pm8941_l6: l6 {};
- pm8941_l7: l7 {};
- pm8941_l8: l8 {};
- pm8941_l9: l9 {};
- pm8941_l10: l10 {};
- pm8941_l11: l11 {};
- pm8941_l12: l12 {};
- pm8941_l13: l13 {};
- pm8941_l14: l14 {};
- pm8941_l15: l15 {};
- pm8941_l16: l16 {};
- pm8941_l17: l17 {};
- pm8941_l18: l18 {};
- pm8941_l19: l19 {};
- pm8941_l20: l20 {};
- pm8941_l21: l21 {};
- pm8941_l22: l22 {};
- pm8941_l23: l23 {};
- pm8941_l24: l24 {};
-
- pm8941_lvs1: lvs1 {};
- pm8941_lvs2: lvs2 {};
- pm8941_lvs3: lvs3 {};
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ wlan_alert0: trip-point0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-top-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ gpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ gpu-bottom-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ gpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
};
};
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
+ clock-frequency = <19200000>;
+ };
+
vreg_boost: vreg-boost {
compatible = "regulator-fixed";
@@ -1692,6 +1865,7 @@
pinctrl-names = "default";
pinctrl-0 = <&boost_bypass_n_pin>;
};
+
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph-pwr";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
new file mode 100644
index 000000000000..58cb2ce1e4df
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Fairphone 2";
+ compatible = "fairphone,fp2", "qcom,msm8974";
+
+ aliases {
+ mmc0 = &sdhc_1;
+ mmc1 = &sdhc_2;
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&pm8941_l18>;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@41 {
+ compatible = "ilitek,ili2120";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&imem {
+ reboot-mode {
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio1", "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+};
+
+&pronto {
+ status = "okay";
+
+ vddmx-supply = <&pm8841_s1>;
+ vddcx-supply = <&pm8841_s2>;
+ vddpx-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wcnss_pin_a>;
+
+ iris {
+ vddxo-supply = <&pm8941_l6>;
+ vddrfa-supply = <&pm8941_l11>;
+ vddpa-supply = <&pm8941_l19>;
+ vdddig-supply = <&pm8941_s3>;
+ };
+
+ smd-edge {
+ qcom,remote-pid = <4>;
+ label = "pronto";
+
+ wcnss {
+ status = "okay";
+ };
+ };
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pm8841_s2>;
+};
+
+&remoteproc_mss {
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+};
+
+&rpm_requests {
+ pm8841-regulators {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+};
+
+&smbb {
+ usb-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,fast-charge-safe-voltage = <4380000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,auto-recharge-threshold-voltage = <4240000>;
+ qcom,minimum-input-voltage = <4450000>;
+};
+
+&tlmm {
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ wcnss_pin_a: wcnss-pin-active {
+ wlan {
+ pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "wlan";
+
+ drive-strength = <6>;
+ bias-pull-down;
+ };
+
+ bt {
+ pins = "gpio35", "gpio43", "gpio44";
+ function = "bt";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ fm {
+ pins = "gpio41", "gpio42";
+ function = "fm";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
new file mode 100644
index 000000000000..d6b2300a8223
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -0,0 +1,813 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Samsung Galaxy S5";
+ compatible = "samsung,klte", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart1;
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_3; /* SDC2 SD card slot */
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ home-key {
+ label = "home_key";
+ gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ i2c-gpio-touchkey {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_touchkey_pins>;
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_pin>;
+
+ vcc-supply = <&max77826_ldo15>;
+ vdd-supply = <&pma8084_l19>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+ };
+
+ i2c-gpio-led {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_led_gpioex_pins>;
+
+ i2c-gpio,delay-us = <2>;
+
+ gpio_expander: gpio@20 {
+ compatible = "nxp,pcal6416";
+ reg = <0x20>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ vcc-supply = <&pma8084_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioex_pin>;
+
+ reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+ };
+
+ led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vreg_panel: panel-regulator {
+ compatible = "regulator-fixed";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_en_pin>;
+
+ regulator-name = "panel-vddr-reg";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ /delete-node/ vreg-boost;
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&max77826_ldo13>;
+ vio-supply = <&pma8084_lvs2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ syna,startup-delay-ms = <100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ pmic@60 {
+ reg = <0x60>;
+ compatible = "maxim,max77826";
+
+ regulators {
+ max77826_ldo1: LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ max77826_ldo2: LDO2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ max77826_ldo3: LDO3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ max77826_ldo4: LDO4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo5: LDO5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo6: LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo7: LDO7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo8: LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo9: LDO9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_ldo10: LDO10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ max77826_ldo11: LDO11 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ max77826_ldo12: LDO12 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo13: LDO13 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo14: LDO14 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ max77826_ldo15: LDO15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ max77826_buck: BUCK {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ max77826_buckboost: BUCKBOOST {
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_pins_active>;
+ pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+
+ bluetooth {
+ compatible = "brcm,bcm43540-bt";
+ max-speed = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins>;
+ device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e3fa2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+ iovdd-supply = <&pma8084_lvs4>;
+ vddr-supply = <&vreg_panel>;
+
+ reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+ te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+};
+
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+
+ vddio-supply = <&pma8084_l12>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pma8084_l6>;
+ v3p3-supply = <&pma8084_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+};
+
+&pma8084_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ touchkey_pin: touchkey-int-pin {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ touch_pin: touchscreen-int-pin {
+ pins = "gpio8";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+
+ panel_en_pin: panel-en-pin {
+ pins = "gpio14";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
+ wlan_sleep_clk_pin: wlan-sleep-clk-pin {
+ pins = "gpio16";
+ function = "func2";
+
+ output-high;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+
+ panel_rst_pin: panel-rst-pin {
+ pins = "gpio17";
+ function = "normal";
+ bias-disable;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+
+ fuelgauge_pin: fuelgauge-int-pin {
+ pins = "gpio21";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pma8084_s2>;
+};
+
+&remoteproc_mss {
+ cx-supply = <&pma8084_s2>;
+ mss-supply = <&pma8084_s6>;
+ mx-supply = <&pma8084_s1>;
+ pll-supply = <&pma8084_l12>;
+};
+
+&rpm_requests {
+ pma8084-regulators {
+ compatible = "qcom,rpm-pma8084-regulators";
+
+ pma8084_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ pma8084_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pma8084_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pma8084_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pma8084_s6: s6 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pma8084_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pma8084_l3: l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pma8084_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pma8084_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pma8084_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pma8084_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pma8084_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pma8084_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pma8084_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pma8084_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pma8084_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pma8084_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pma8084_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
+
+ pma8084_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pma8084_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pma8084_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pma8084_l25: l25 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pma8084_l26: l26 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pma8084_l27: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_lvs1: lvs1 {};
+ pma8084_lvs2: lvs2 {};
+ pma8084_lvs3: lvs3 {};
+ pma8084_lvs4: lvs4 {};
+
+ pma8084_5vs1: 5vs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pma8084_l20>;
+ vqmmc-supply = <&pma8084_s4>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pma8084_s4>;
+ non-removable;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+
+ wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+ };
+};
+
+&sdhc_3 {
+ status = "okay";
+ max-frequency = <100000000>;
+ vmmc-supply = <&pma8084_l21>;
+ vqmmc-supply = <&pma8084_l13>;
+
+ /*
+ * cd-gpio is intentionally disabled. If enabled, an SD card
+ * present during boot is not initialized correctly. Without
+ * cd-gpios the driver resorts to polling, so hotplug works.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
+ /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+ /* This seems suspicious, but somebody with this device should look into it. */
+ blsp2_uart2_pins_active: blsp2-uart2-pins-active {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "blsp_uart8";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ bt_pins: bt-pins {
+ hostwake {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <16>;
+ input-enable;
+ };
+
+ devwake {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_on: sdhc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ };
+
+ sdc3_on: sdc3-on {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ sdhc3_cd_pin: sdc3-cd-on {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_on: sdhc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
+
+ i2c_touchkey_pins: i2c-touchkey {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+
+ i2c_led_gpioex_pins: i2c-led-gpioex {
+ pins = "gpio120", "gpio121";
+ function = "gpio";
+ input-enable;
+ bias-pull-down;
+ };
+
+ gpioex_pin: gpioex {
+ pins = "gpio145";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ wifi_pin: wifi {
+ pins = "gpio92";
+ function = "gpio";
+ input-enable;
+ bias-pull-down;
+ };
+
+ panel_te_pin: panel {
+ pins = "gpio12";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
new file mode 100644
index 000000000000..9bd8faea61a5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Sony Xperia Z2 Tablet";
+ compatible = "sony,xperia-castor", "qcom,msm8974";
+
+ aliases {
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ vreg_bl_vddio: lcd-backlight-vddio {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bl_vddio";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ gpio = <&tlmm 69 0>;
+ enable-active-high;
+
+ vin-supply = <&pm8941_s3>;
+ startup-delay-us = <70000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_backlight_en_pin_a>;
+ };
+
+ vreg_vsp: lcd-dcdc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_vsp";
+ regulator-min-microvolt = <5600000>;
+ regulator-max-microvolt = <5600000>;
+
+ gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_dcdc_en_pin_a>;
+ };
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_pin>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_i2c2 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ synaptics@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_pin>;
+
+ syna,startup-delay-ms = <10>;
+
+ rmi-f01@1 {
+ reg = <0x1>;
+ syna,nosleep = <1>;
+ };
+
+ rmi-f11@11 {
+ reg = <0x11>;
+ syna,f11-flip-x = <1>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp2_i2c5 {
+ status = "okay";
+ clock-frequency = <355000>;
+
+ lp8566_wled: backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+ power-supply = <&vreg_bl_vddio>;
+
+ bl-name = "backlight";
+ dev-ctrl = /bits/ 8 <0x05>;
+ init-brt = /bits/ 8 <0x3f>;
+ rom_a0h {
+ rom-addr = /bits/ 8 <0xa0>;
+ rom-val = /bits/ 8 <0xff>;
+ };
+ rom_a1h {
+ rom-addr = /bits/ 8 <0xa1>;
+ rom-val = /bits/ 8 <0x3f>;
+ };
+ rom_a2h {
+ rom-addr = /bits/ 8 <0xa2>;
+ rom-val = /bits/ 8 <0x20>;
+ };
+ rom_a3h {
+ rom-addr = /bits/ 8 <0xa3>;
+ rom-val = /bits/ 8 <0x5e>;
+ };
+ rom_a4h {
+ rom-addr = /bits/ 8 <0xa4>;
+ rom-val = /bits/ 8 <0x02>;
+ };
+ rom_a5h {
+ rom-addr = /bits/ 8 <0xa5>;
+ rom-val = /bits/ 8 <0x04>;
+ };
+ rom_a6h {
+ rom-addr = /bits/ 8 <0xa6>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom_a7h {
+ rom-addr = /bits/ 8 <0xa7>;
+ rom-val = /bits/ 8 <0xf7>;
+ };
+ rom_a9h {
+ rom-addr = /bits/ 8 <0xa9>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom_aah {
+ rom-addr = /bits/ 8 <0xaa>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ rom_aeh {
+ rom-addr = /bits/ 8 <0xae>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+
+ host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+ extcon = <&smbb>, <&usb_id>;
+ vbus-supply = <&chg_otg>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ extcon = <&smbb>;
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+ };
+ };
+};
+
+&pm8941_coincell {
+ status = "okay";
+
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ bt_reg_on_pin: bt-reg-on {
+ pins = "gpio16";
+ function = "normal";
+
+ output-low;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_sleep_clk_pin: wl-sleep-clk {
+ pins = "gpio17";
+ function = "func2";
+
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ wlan_regulator_pin: wl-reg-active {
+ pins = "gpio18";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+ pins = "gpio20";
+ function = "normal";
+
+ bias-disable;
+ power-source = <PM8941_GPIO_S3>;
+ input-disable;
+ output-low;
+ };
+
+};
+
+&rpm_requests {
+ pm8941-regulators {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
+ vdd_l21-supply = <&vreg_boost>;
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-system-load = <154000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_s4: s4 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <500000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-boot-on;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ regulator-boot-on;
+ };
+
+ pm8941_lvs3: lvs3 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
+
+ cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+};
+
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ vmmc-supply = <&vreg_wlan>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc3_on>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bcrmf@1 {
+ compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ brcm,drive-strength = <10>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin>;
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+};
+
+&tlmm {
+ lcd_backlight_en_pin_a: lcd-backlight-vddio {
+ pins = "gpio69";
+ drive-strength = <10>;
+ output-low;
+ bias-disable;
+ };
+
+ sdc1_on: sdc1-on {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ cd {
+ pins = "gpio62";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ sdc3_on: sdc3-on {
+ clk {
+ pins = "gpio40";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "gpio39";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38";
+ function = "sdc3";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ ts_int_pin: ts-int-pin {
+ pins = "gpio86";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ bt_host_wake_pin: bt-host-wake {
+ pins = "gpio95";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ bt_dev_wake_pin: bt-dev-wake {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8974pro.dtsi b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
index b64c28036dd0..1e882e16a221 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974pro.dtsi
@@ -1,23 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974.dtsi"
-/ {
- soc {
- sdhci@f9824900 {
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>,
- <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
- <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
- clock-names = "core", "iface", "xo", "cal", "sleep";
- };
+&gcc {
+ compatible = "qcom,gcc-msm8974pro";
+};
- clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8974pro";
- };
+&gpu {
+ compatible = "qcom,adreno-330.2", "qcom,adreno";
+};
- adreno@fdb00000 {
- compatible = "qcom,adreno-330.2",
- "qcom,adreno";
- };
- };
+&sdhc_1 {
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_SDCC1_CDCCAL_FF_CLK>,
+ <&gcc GCC_SDCC1_CDCCAL_SLEEP_CLK>;
+ clock-names = "core", "iface", "xo", "cal", "sleep";
};
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index b3d0f7b5874d..9b7d9d04ded6 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
&spmi_bus {
pm8226_0: pm8226@0 {
@@ -40,6 +41,46 @@
chg_otg: otg-vbus { };
};
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pm8226_vadc: adc@3100 {
+ compatible = "qcom,spmi-vadc";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ adc-chan@7 {
+ reg = <VADC_VSYS>;
+ qcom,pre-scaling = <1 3>;
+ label = "vph_pwr";
+ };
+ adc-chan@8 {
+ reg = <VADC_DIE_TEMP>;
+ label = "die_temp";
+ };
+ adc-chan@9 {
+ reg = <VADC_REF_625MV>;
+ label = "ref_625mv";
+ };
+ adc-chan@a {
+ reg = <VADC_REF_1250MV>;
+ label = "ref_1250mv";
+ };
+ adc-chan@e {
+ reg = <VADC_GND_REF>;
+ };
+ adc-chan@f {
+ reg = <VADC_VDD_VADC>;
+ };
+ };
+
pm8226_mpps: mpps@a000 {
compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
reg = <0xa000>;
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index da00b8f5eecd..cdd2bdb77b32 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -131,7 +131,7 @@
qcom,external-resistor-micro-ohms = <10000>;
};
- coincell@2800 {
+ pm8941_coincell: coincell@2800 {
compatible = "qcom,pm8941-coincell";
reg = <0x2800>;
status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom-pmx65.dtsi
new file mode 100644
index 000000000000..5411b833d26e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-pmx65.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmic@1 {
+ compatible = "qcom,pmx65", "qcom,spmi-pmic";
+ reg = <1 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmx65_temp: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmx65_gpios: pinctrl@8800 {
+ compatible = "qcom,pmx65-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index d455795da44c..123390721b7f 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -275,13 +275,6 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
- ipa_virt: interconnect@1e00000 {
- compatible = "qcom,sdx55-ipa-virt";
- reg = <0x01e00000 0x100000>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
qpic_bam: dma-controller@1b04000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x01b04000 0x1c000>;
@@ -770,7 +763,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 59457da8e5f1..79dc31aa7cd1 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -5,6 +5,10 @@
/dts-v1/;
#include "qcom-sdx65.dtsi"
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <arm64/qcom/pmk8350.dtsi>
+#include <arm64/qcom/pm8150b.dtsi>
+#include "qcom-pmx65.dtsi"
/ {
model = "Qualcomm Technologies, Inc. SDX65 MTP";
@@ -18,8 +22,225 @@
chosen {
stdout-path = "serial0:115200n8";
};
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mpss_dsm: memory@8c400000 {
+ no-map;
+ reg = <0x8c400000 0x3200000>;
+ };
+
+ ipa_fw_mem: memory@8fced000 {
+ no-map;
+ reg = <0x8fced000 0x10000>;
+ };
+
+ mpss_adsp_mem: memory@90800000 {
+ no-map;
+ reg = <0x90800000 0x10000000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_bob_3p3: pmx65_bob {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
};
&blsp1_uart3 {
status = "ok";
};
+
+&apps_rsc {
+ pmx65-rpmh-regulators {
+ compatible = "qcom,pmx65-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-supply = <&vreg_s2b_1p224>;
+ vdd-l2-l18-supply = <&vreg_s2b_1p224>;
+ vdd-l3-supply = <&vreg_s8b_0p824>;
+ vdd-l4-supply = <&vreg_s7b_0p936>;
+ vdd-l5-l6-l16-supply = <&vreg_s4b_1p824>;
+ vdd-l7-supply = <&vreg_s3b_0p776>;
+ vdd-l8-l9-supply = <&vreg_s8b_0p824>;
+ vdd-l10-supply = <&vreg_bob_3p3>;
+ vdd-l11-l13-supply = <&vreg_bob_3p3>;
+ vdd-l12-supply = <&vreg_s2b_1p224>;
+ vdd-l14-supply = <&vreg_s3b_0p776>;
+ vdd-l15-supply = <&vreg_s2b_1p224>;
+ vdd-l17-supply = <&vreg_s8b_0p824>;
+ vdd-l19-supply = <&vreg_s3b_0p776>;
+ vdd-l20-supply = <&vreg_s7b_0p936>;
+ vdd-l21-supply = <&vreg_s7b_0p936>;
+
+ vreg_s2b_1p224: smps2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ vreg_s3b_0p776: smps3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1040000>;
+ };
+
+ vreg_s4b_1p824: smps4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2024000>;
+ };
+
+ vreg_s7b_0p936: smps7 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1040000>;
+ };
+
+ vreg_s8b_0p824: smps8 {
+ regulator-min-microvolt = <304000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo2 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo3 {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo4 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo10 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo14 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo15 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo16 {
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1776000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo17 {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo19 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo20 {
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ ldo21 {
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 796641d30e06..df6f9d6288fe 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/qcom,gcc-sdx65.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
@@ -60,11 +61,56 @@
#size-cells = <1>;
ranges;
+ tz_heap_mem: memory@8fcad000 {
+ no-map;
+ reg = <0x8fcad000 0x40000>;
+ };
+
+ secdata_mem: memory@8fcfd000 {
+ no-map;
+ reg = <0x8fcfd000 0x1000>;
+ };
+
+ hyp_mem: memory@8fd00000 {
+ no-map;
+ reg = <0x8fd00000 0x80000>;
+ };
+
+ access_control_mem: memory@8fd80000 {
+ no-map;
+ reg = <0x8fd80000 0x80000>;
+ };
+
+ aop_mem: memory@8fe00000 {
+ no-map;
+ reg = <0x8fe00000 0x20000>;
+ };
+
+ smem_mem: memory@8fe20000 {
+ no-map;
+ reg = <0x8fe20000 0xc0000>;
+ };
+
cmd_db: reserved-memory@8fee0000 {
compatible = "qcom,cmd-db";
reg = <0x8fee0000 0x20000>;
no-map;
};
+
+ tz_mem: memory@8ff00000 {
+ no-map;
+ reg = <0x8ff00000 0x100000>;
+ };
+
+ tz_apps_mem: memory@90000000 {
+ no-map;
+ reg = <0x90000000 0x500000>;
+ };
+
+ llcc_tcm_mem: memory@15800000 {
+ no-map;
+ reg = <0x15800000 0x800000>;
+ };
};
soc: soc {
@@ -91,6 +137,44 @@
status = "disabled";
};
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01f40000 0x40000>;
+ #hwlock-cells = <1>;
+ };
+
+ sdhc_1: sdhci@8804000 {
+ compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x08804000 0x1000>;
+ reg-names = "hc_mem";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ spmi_bus: qcom,spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0xc440000 0xd00>,
+ <0xc600000 0x2000000>,
+ <0xe600000 0x100000>,
+ <0xe700000 0xa0000>,
+ <0xc40a000 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "periph_irq";
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ qcom,channel = <0>;
+ qcom,ee = <0>;
+ };
+
tlmm: pinctrl@f100000 {
compatible = "qcom,sdx65-tlmm";
reg = <0xf100000 0x300000>;
@@ -112,6 +196,46 @@
interrupt-controller;
};
+ apps_smmu: iommu@15000000 {
+ compatible = "qcom,sdx65-smmu-500", "arm,mmu-500";
+ reg = <0x15000000 0x40000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
intc: interrupt-controller@17800000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -121,6 +245,23 @@
<0x17802000 0x1000>;
};
+ a7pll: clock@17808000 {
+ compatible = "qcom,sdx55-a7pll";
+ reg = <0x17808000 0x1000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <0>;
+ };
+
+ apcs: mailbox@17810000 {
+ compatible = "qcom,sdx55-apcs-gcc", "syscon";
+ reg = <0x17810000 0x2000>;
+ #mbox-cells = <1>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>;
+ clock-names = "ref", "pll", "aux";
+ #clock-cells = <0>;
+ };
+
timer@17820000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -202,12 +343,62 @@
<WAKE_TCS 2>,
<CONTROL_TCS 1>;
- rpmhcc: clock-controller@1 {
+ rpmhcc: clock-controller {
compatible = "qcom,sdx65-rpmh-clk";
#clock-cells = <1>;
clock-names = "xo";
clocks = <&xo_board>;
};
+
+ rpmhpd: power-controller {
+ compatible = "qcom,sdx65-rpmhpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmhpd_opp_table>;
+
+ rpmhpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmhpd_opp_ret: opp1 {
+ opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+ };
+
+ rpmhpd_opp_min_svs: opp2 {
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+
+ rpmhpd_opp_low_svs: opp3 {
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+
+ rpmhpd_opp_svs: opp4 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ rpmhpd_opp_svs_l1: opp5 {
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ rpmhpd_opp_nom: opp6 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ rpmhpd_opp_nom_l1: opp7 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ rpmhpd_opp_nom_l2: opp8 {
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+ };
+
+ rpmhpd_opp_turbo: opp9 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ rpmhpd_opp_turbo_l1: opp10 {
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 3502b5dcc04f..c0c145a5fe8d 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -140,6 +140,7 @@
compatible = "renesas,r8a7743-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index f5d4b8b85b6d..3f4fb53dd6df 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -140,6 +140,7 @@
compatible = "renesas,r8a7744-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7744_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index f877c51f769c..fe8e98a66d93 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -270,6 +270,7 @@
rwdt: watchdog@e6020000 {
compatible = "renesas,r8a7745-wdt",
"renesas,rcar-gen2-wdt";
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index 13ef1e9bf4d5..c90f2a270214 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -91,6 +91,7 @@
compatible = "renesas,r8a77470-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index ed6dd4fcc503..a640488d513b 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -274,6 +274,7 @@
compatible = "renesas,r8a7790-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0ccc162d3c2c..542ed0a71872 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -161,6 +161,7 @@
compatible = "renesas,r8a7791-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 9cdb73894ac2..a6d9367f8fa0 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -111,6 +111,7 @@
compatible = "renesas,r8a7792-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index dea4b1e108af..9ebe7bfaf0ed 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -146,6 +146,7 @@
compatible = "renesas,r8a7793-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index eac9ed8df0be..b601ee6f7580 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -128,6 +128,7 @@
compatible = "renesas,r8a7794-wdt",
"renesas,rcar-gen2-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
resets = <&cpg 402>;
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 636a6ab31c58..d3665910958b 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -66,6 +66,19 @@
interrupt-parent = <&gic>;
ranges;
+ rtc0: rtc@40006000 {
+ compatible = "renesas,r9a06g032-rtc", "renesas,rzn1-rtc";
+ reg = <0x40006000 0x1000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm", "timer", "pps";
+ clocks = <&sysctrl R9A06G032_HCLK_RTC>;
+ clock-names = "hclk";
+ power-domains = <&sysctrl>;
+ status = "disabled";
+ };
+
wdt0: watchdog@40008000 {
compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
reg = <0x40008000 0x1000>;
@@ -87,10 +100,62 @@
reg = <0x4000c000 0x1000>;
status = "okay";
#clock-cells = <1>;
+ #power-domain-cells = <0>;
clocks = <&ext_mclk>, <&ext_rtc_clk>,
<&ext_jtag_clk>, <&ext_rgmii_ref>;
clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ dmamux: dma-router@a0 {
+ compatible = "renesas,rzn1-dmamux";
+ reg = <0xa0 4>;
+ #dma-cells = <6>;
+ dma-requests = <32>;
+ dma-masters = <&dma0 &dma1>;
+ };
+ };
+
+ pci_usb: pci@40030000 {
+ compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
+ device_type = "pci";
+ clocks = <&sysctrl R9A06G032_HCLK_USBH>,
+ <&sysctrl R9A06G032_HCLK_USBPM>,
+ <&sysctrl R9A06G032_CLK_PCI_USB>;
+ clock-names = "hclkh", "hclkpm", "pciclk";
+ power-domains = <&sysctrl>;
+ reg = <0x40030000 0xc00>,
+ <0x40020000 0x1100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
+ /* Should map all possible DDR as inbound ranges, but
+ * the IP only supports a 256MB, 512MB, or 1GB window.
+ * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
+ */
+ dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usbphy>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usbphy>;
+ phy-names = "usb";
+ };
};
uart0: serial@40060000 {
@@ -134,6 +199,8 @@
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 0 0 0 0 0 1>, <&dmamux 1 0 0 0 1 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -145,6 +212,8 @@
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 2 0 0 0 2 1>, <&dmamux 3 0 0 0 3 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -156,6 +225,8 @@
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 4 0 0 0 4 1>, <&dmamux 5 0 0 0 5 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -167,6 +238,8 @@
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 6 0 0 0 6 1>, <&dmamux 7 0 0 0 7 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -178,6 +251,8 @@
reg-io-width = <4>;
clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmamux 4 0 0 0 20 1>, <&dmamux 5 0 0 0 21 1>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -195,11 +270,40 @@
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
clock-names = "hclk", "eclk";
+ power-domains = <&sysctrl>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
+ dma0: dma-controller@40104000 {
+ compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+ reg = <0x40104000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "hclk";
+ clocks = <&sysctrl R9A06G032_HCLK_DMA0>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <1>;
+ #dma-cells = <3>;
+ block_size = <0xfff>;
+ data-width = <8>;
+ };
+
+ dma1: dma-controller@40105000 {
+ compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+ reg = <0x40105000 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "hclk";
+ clocks = <&sysctrl R9A06G032_HCLK_DMA1>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <1>;
+ #dma-cells = <3>;
+ block_size = <0xfff>;
+ data-width = <8>;
+ };
+
gic: interrupt-controller@44101000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic";
interrupt-controller;
@@ -214,8 +318,7 @@
};
timer {
- compatible = "arm,cortex-a7-timer",
- "arm,armv7-timer";
+ compatible = "arm,armv7-timer";
interrupt-parent = <&gic>;
arm,cpu-registers-not-fw-configured;
always-on;
@@ -225,4 +328,10 @@
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ usbphy: usb-phy {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index ba2b8891bbb7..242ce42fbd87 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -556,7 +556,7 @@
status = "disabled";
};
- pdma: pdma@20078000 {
+ pdma: dma-controller@20078000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20078000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -614,7 +614,7 @@
#interrupt-cells = <2>;
};
- pcfg_pull_default: pcfg_pull_default {
+ pcfg_pull_default: pcfg-pull-default {
bias-pull-pin-default;
};
diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 85d3fce0142f..35b7a5798eee 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "rk3188.dtsi"
/ {
@@ -485,7 +486,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio3>;
- interrupts = <RK_PD2 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PD2 IRQ_TYPE_NONE>;
interrupt-names = "host-wake";
brcm,drive-strength = <5>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 5868eb512f69..6513ffcaac92 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -501,7 +501,7 @@
<75000000>;
};
- pdma: pdma@110f0000 {
+ pdma: dma-controller@110f0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x110f0000 0x4000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 54de3bc77c30..bc0b7354b6c0 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,8 +29,7 @@
memory@30000000 {
device_type = "memory";
- reg = <0x30000000 0x05000000
- 0x40000000 0x18000000>;
+ reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>;
};
pmic_ap_clk: clock-0 {
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index c8f1c324a6c2..daa1067055c8 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -24,9 +24,9 @@
memory@30000000 {
device_type = "memory";
- reg = <0x30000000 0x05000000
- 0x40000000 0x10000000
- 0x50000000 0x08000000>;
+ reg = <0x30000000 0x05000000>,
+ <0x40000000 0x10000000>,
+ <0x50000000 0x08000000>;
};
reserved-memory {
@@ -564,7 +564,6 @@
reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
vdd3-supply = <&ldo7_reg>;
vci-supply = <&ldo17_reg>;
- spi-cs-high;
spi-max-frequency = <1200000>;
pinctrl-names = "default";
@@ -636,7 +635,7 @@
};
&i2s0 {
- dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+ dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
status = "okay";
};
@@ -895,7 +894,7 @@
device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gph2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
+ interrupt-names = "host-wakeup";
};
};
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c6f39147cb96..d32f42dd1bf5 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -30,9 +30,9 @@
memory@30000000 {
device_type = "memory";
- reg = <0x30000000 0x05000000
- 0x40000000 0x10000000
- 0x50000000 0x08000000>;
+ reg = <0x30000000 0x05000000>,
+ <0x40000000 0x10000000>,
+ <0x50000000 0x08000000>;
};
pmic_ap_clk: clock-0 {
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 353ba7b09a0c..f1b85aae8842 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -117,7 +117,7 @@
};
};
- pdma0: dma@e0900000 {
+ pdma0: dma-controller@e0900000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xe0900000 0x1000>;
interrupt-parent = <&vic0>;
@@ -125,11 +125,9 @@
clocks = <&clocks CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
- pdma1: dma@e0a00000 {
+ pdma1: dma-controller@e0a00000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xe0a00000 0x1000>;
interrupt-parent = <&vic0>;
@@ -137,8 +135,6 @@
clocks = <&clocks CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
adc: adc@e1700000 {
@@ -239,8 +235,8 @@
reg = <0xeee30000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ dma-names = "tx", "rx", "tx-sec";
+ dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
clock-names = "iis",
"i2s_opclk0",
"i2s_opclk1";
@@ -259,8 +255,8 @@
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <17>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 12>, <&pdma1 13>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 13>, <&pdma1 12>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
pinctrl-names = "default";
@@ -274,8 +270,8 @@
reg = <0xe2a00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <18>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 14>, <&pdma1 15>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 15>, <&pdma1 14>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
pinctrl-names = "default";
@@ -427,38 +423,28 @@
status = "disabled";
};
- ehci: ehci@ec200000 {
+ ehci: usb@ec200000 {
compatible = "samsung,exynos4210-ehci";
reg = <0xec200000 0x100>;
interrupts = <23>;
interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
+ phys = <&usbphy 1>;
+ phy-names = "host";
status = "disabled";
-
- port@0 {
- reg = <0>;
- phys = <&usbphy 1>;
- };
};
- ohci: ohci@ec300000 {
+ ohci: usb@ec300000 {
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
+ phys = <&usbphy 1>;
+ phy-names = "host";
status = "disabled";
-
- port@0 {
- reg = <0>;
- phys = <&usbphy 1>;
- };
};
mfc: codec@f1700000 {
@@ -528,7 +514,7 @@
clock-names = "sclk_fimg2d", "fimg2d";
};
- mdma1: mdma@fa200000 {
+ mdma1: dma-controller@fa200000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfa200000 0x1000>;
interrupt-parent = <&vic0>;
@@ -536,8 +522,6 @@
clocks = <&clocks CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
};
rotator: rotator@fa300000 {
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index f691c8f08d04..b63263129692 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -857,7 +857,6 @@
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
- interrupt-parent;
reg = <0xe8c11000 0x1000>,
<0xe8c12000 0x2000>;
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 7c1d6423d7f8..bfaef45bdd04 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -46,7 +46,7 @@
<0xff113000 0x1000>;
};
- intc: intc@fffed000 {
+ intc: interrupt-controller@fffed000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -80,8 +80,6 @@
<0 110 4>,
<0 111 4>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
resets = <&rst DMA_RESET>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 3ba431dfa8c9..26bda2557fe8 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -38,7 +38,7 @@
<0xff113000 0x1000>;
};
- intc: intc@ffffd000 {
+ intc: interrupt-controller@ffffd000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
@@ -73,8 +73,6 @@
<0 90 IRQ_TYPE_LEVEL_HIGH>,
<0 91 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&l4_main_clk>;
clock-names = "apb_pclk";
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index dc0bcc7020f1..c28b32640254 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -755,7 +755,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 1>, <&prcc_pclk 3 1>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
<&dma 8 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -772,7 +772,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcc_kclk 3 2>, <&prcc_pclk 3 2>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
<&dma 9 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -790,7 +790,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 8>, <&prcc_pclk 2 8>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
<&dma 0 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -807,7 +807,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 2>, <&prcc_pclk 2 2>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
<&dma 35 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -824,7 +824,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 2 1>, <&prcc_pclk 2 1>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
<&dma 33 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
@@ -841,7 +841,7 @@
#size-cells = <0>;
/* Same clock wired to kernel and pclk */
clocks = <&prcc_pclk 1 7>, <&prcc_pclk 1 7>;
- clock-names = "SSPCLK", "apb_pclk";
+ clock-names = "sspclk", "apb_pclk";
dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
<&dma 40 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
new file mode 100644
index 000000000000..d6940e0afa86
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts
@@ -0,0 +1,785 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Devicetree for the Samsung Galaxy Exhibit SGH-T599 also known as Codina-TMO,
+ * the "TMO" shall be read "T-Mobile" as this phone was produced exlusively
+ * for T-Mobile in the United States.
+ *
+ * This phone is closely related to the Codina, but has:
+ * - No CPU speed cap, full ~1GHz rate
+ * - Different power management IC, AB8505
+ * - As AB8505 has a micro USB phy, no TI TSU6111
+ * - Different power routing such as the removal of the external LDO for the
+ * touchscreen in favor of using the AB8505
+ * - Using a regulator for the key backlight LED
+ * - Using the Samsung S6D27A1 panel by default
+ * - The panel is using one of the ordinary AB8505 regulators for 1.8V
+ * - WiFi/Bluetooth combi chip upgraded to BCM4334
+ * - GPIO for backlight control moved from 68 to 69
+ */
+
+/dts-v1/;
+#include "ste-db8500.dtsi"
+#include "ste-ab8505.dtsi"
+#include "ste-dbx5x0-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "Samsung Galaxy Exhibit (SGH-T599)";
+ compatible = "samsung,codina-tmo", "st-ericsson,u8500";
+
+ chosen {
+ stdout-path = &serial2;
+ };
+
+ battery: battery {
+ compatible = "samsung,eb425161lu";
+ };
+
+ thermal-zones {
+ battery-thermal {
+ /* This zone will be polled by the battery temperature code */
+ polling-delay = <0>;
+ polling-delay-passive = <0>;
+ thermal-sensors = <&bat_therm>;
+ };
+ };
+
+ bat_therm: thermistor {
+ compatible = "samsung,1404-001221";
+ io-channels = <&gpadc 0x02>; /* BatTemp */
+ pullup-uv = <1800000>;
+ pullup-ohm = <230000>;
+ pulldown-ohm = <0>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ /* TI TXS0206 level translator for 2.9 V */
+ sd_level_translator: regulator-gpio {
+ compatible = "regulator-fixed";
+
+ /* GPIO87 EN */
+ gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ regulator-name = "sd-level-translator";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-type = "voltage";
+
+ startup-delay-us = <200>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd_level_translator_default>;
+ };
+
+ /* External LDO MIC5366-3.3YMT for eMMC */
+ ldo_3v3_reg: regulator-gpio-ldo-3v3 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VMEM_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <5000>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_ldo_en_default_mode>;
+ };
+
+ /*
+ * External Ricoh RP152L010B-TR LCD LDO regulator for the display.
+ * LCD_PWR_EN controls both the 3.0V output.
+ */
+ lcd_3v0_reg: regulator-gpio-lcd-3v0 {
+ compatible = "regulator-fixed";
+ /* Supplied in turn by VBAT */
+ regulator-name = "VREG_LCD_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ /* GPIO219 controls this regulator */
+ gpio = <&gpio6 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pwr_en_default_mode>;
+ };
+
+ /*
+ * This regulator is a GPIO line that drives the Broadcom WLAN
+ * line WL_REG_ON high and enables the internal regulators
+ * inside the chip. Unfortunatley it is erroneously named
+ * WLAN_RST_N on the schematic but it is not a reset line.
+ *
+ * The voltage specified here is only used to determine the OCR mask,
+ * the for the SDIO connector, the chip is actually connected
+ * directly to VBAT.
+ */
+ wl_reg: regulator-gpio-wlan {
+ compatible = "regulator-fixed";
+ regulator-name = "WL_REG_ON";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ startup-delay-us = <100000>;
+ /* GPIO215 (WLAN_RST_N to WL_REG_ON) */
+ gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_ldo_en_default>;
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ /* GPIO195 "MOT_EN" */
+ enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_default>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_default_mode>;
+
+ button-home {
+ linux,code = <KEY_HOME>;
+ label = "HOME";
+ /* GPIO91 */
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ button-volup {
+ linux,code = <KEY_VOLUMEUP>;
+ label = "VOL+";
+ /* GPIO67 */
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ };
+ button-voldown {
+ linux,code = <KEY_VOLUMEDOWN>;
+ label = "VOL-";
+ /* GPIO92 */
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ led-touchkeys {
+ compatible = "regulator-led";
+ vled-supply = <&ab8500_ldo_aux4_reg>; // 3.3V
+ default-state = "on";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ };
+
+ ktd253: backlight {
+ compatible = "kinetic,ktd253";
+ /* GPIO69 is used on Codina R0.4 and Codina TMO */
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ /* Default to 13/32 brightness */
+ default-brightness = <13>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ktd253_backlight_default_mode>;
+ };
+
+ /* Richtek RT8515GQW Flash LED Driver IC */
+ flash {
+ compatible = "richtek,rt8515";
+ /* GPIO 140 */
+ enf-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+ /* GPIO 141 */
+ ent-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+ /*
+ * RFS is 16 kOhm and RTS is 100 kOhm giving
+ * the flash max current 343mA and torch max
+ * current 55 mA.
+ */
+ richtek,rfs-ohms = <16000>;
+ richtek,rts-ohms = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_flash_default_mode>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ flash-max-microamp = <343750>;
+ led-max-microamp = <55000>;
+ };
+ };
+
+ /* Bit-banged I2C on GPIO143 and GPIO144 also called "SUBPMU I2C" */
+ i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* TODO: this should also be used by the SM5103 Camera power management unit */
+ };
+
+ /* Bit-banged I2C on GPIO151 and GPIO152 also called "COMP I2C" */
+ i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_gpio_1_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ magnetometer@c {
+ compatible = "alps,hscdtd008a";
+ reg = <0x0c>;
+ clock-frequency = <400000>;
+
+ avdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ dvdd-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+ };
+ };
+
+ spi-gpio-0 {
+ compatible = "spi-gpio";
+ /* Clock on GPIO220, pin SCL */
+ sck-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+ /* MOSI on GPIO224, pin SDI "slave data in" */
+ mosi-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+ /* MISO on GPIO225, pin SDO "slave data out" */
+ miso-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+ /* Chip select on GPIO201 */
+ cs-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_gpio_0_default>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "samsung,s6d27a1";
+ spi-max-frequency = <1200000>;
+ /* TYPE 3: inverse clock polarity and phase */
+ spi-cpha;
+ spi-cpol;
+
+ reg = <0>;
+ vci-supply = <&lcd_3v0_reg>;
+ vccio-supply = <&ab8500_ldo_aux6_reg>;
+
+ /* Reset on GPIO139 */
+ reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ /* LCD_VGH/LCD_DETECT, ESD IRQ on GPIO93 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_default_mode>;
+ backlight = <&ktd253>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
+
+ soc {
+ /* External Micro SD slot */
+ mmc@80126000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ st,sig-pin-fbclk;
+ full-pwr-cycle;
+ /* MMC is powered by AUX3 1.2V .. 2.91V */
+ vmmc-supply = <&ab8500_ldo_aux3_reg>;
+ /* 2.9 V level translator is using AUX3 at 2.9 V as well */
+ vqmmc-supply = <&sd_level_translator>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc0_a_2_default>;
+ pinctrl-1 = <&mc0_a_2_sleep>;
+ cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217
+ status = "okay";
+ };
+
+ /* WLAN SDIO channel */
+ mmc@80118000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <50000000>;
+ bus-width = <4>;
+ non-removable;
+ cap-sd-highspeed;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&mc1_a_2_default>;
+ pinctrl-1 = <&mc1_a_2_sleep>;
+ /*
+ * GPIO-controlled voltage enablement: this drives
+ * the WL_REG_ON line high when we use this device.
+ * Represented as regulator to fill OCR mask.
+ */
+ vmmc-supply = <&wl_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ /* GPIO216 WL_HOST_WAKE */
+ interrupt-parent = <&gpio6>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_default_mode>;
+ };
+ };
+
+ /* eMMC */
+ mmc@80005000 {
+ arm,primecell-periphid = <0x10480180>;
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ no-sdio;
+ no-sd;
+ vmmc-supply = <&ldo_3v3_reg>;
+ pinctrl-names = "default", "sleep";
+ /*
+ * GPIO130 will be set to input no pull-up resulting in a resistor
+ * pulling the reset high and taking the memory out of reset.
+ */
+ pinctrl-0 = <&mc2_a_1_default>;
+ pinctrl-1 = <&mc2_a_1_sleep>;
+ status = "okay";
+ };
+
+ /* GBF (Bluetooth) UART */
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u0_a_1_default>;
+ pinctrl-1 = <&u0_a_1_sleep>;
+ status = "okay";
+
+ bluetooth {
+ /* BCM4334B0 actually */
+ compatible = "brcm,bcm4330-bt";
+ /* GPIO222 rail BT_VREG_EN to BT_REG_ON */
+ shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ /* BT_WAKE on GPIO199 */
+ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ /* BT_HOST_WAKE on GPIO97 */
+ /* FIXME: convert to interrupt */
+ host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+ /* BT_RST_N on GPIO209 */
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_default_mode>;
+ };
+ };
+
+ /* GPS UART */
+ uart@80121000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ /* CTS/RTS is not used, CTS is repurposed as GPIO */
+ pinctrl-0 = <&u1rxtx_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep>;
+ /* FIXME: add a device for the GPS here */
+ };
+
+ /* Debugging console UART connected to AB8505 */
+ uart@80007000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&u2rxtx_c_1_default>;
+ pinctrl-1 = <&u2rxtx_c_1_sleep>;
+ };
+
+ prcmu@80157000 {
+ ab8505 {
+ phy {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&usb_a_1_default>;
+ pinctrl-1 = <&usb_a_1_sleep>;
+ };
+
+ ab8500_fg {
+ line-impedance-micro-ohms = <36000>;
+ };
+
+ /* This is mostly identical to the Codina v0.4 regulators */
+ regulator {
+ ab8500_ldo_aux1 {
+ regulator-name = "v-sensors-vdd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux2 {
+ regulator-name = "v-aux2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux3 {
+ regulator-name = "v-mmc-sd";
+ };
+
+ ab8500_ldo_aux4 {
+ regulator-name = "v-aux4";
+ /*
+ * Providing some span here makes the touchkey
+ * LEDs actually dimmable.
+ */
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ab8500_ldo_aux5 {
+ regulator-name = "v-aux5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux6 {
+ /* 1.8 V to the display */
+ regulator-name = "v-aux6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ab8500_ldo_aux8 {
+ regulator-name = "v-sensors-vio";
+ };
+ };
+ };
+ };
+
+ /* I2C0 also known as "AGC I2C" */
+ i2c@80004000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c0_a_1_default>;
+ pinctrl-1 = <&i2c0_a_1_sleep>;
+
+ proximity@39 {
+ /* Codina has the Amstaos TMD2672 */
+ compatible = "amstaos,tmd2672";
+ clock-frequency = <400000>;
+ reg = <0x39>;
+
+ /* IRQ on GPIO146 "PS_INT" */
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&ab8500_ldo_aux1_reg>;
+ vddio-supply = <&ab8500_ldo_aux8_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tmd2672_codina_default>;
+ };
+ };
+
+ /* I2C2 on GPIO10 and GPIO11 also called "SENSORS I2C" */
+ i2c@80128000 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c2_b_2_default>;
+ pinctrl-1 = <&i2c2_b_2_sleep>;
+
+ /* Bosch BMA254 accelerometer */
+ accelerometer@18 {
+ compatible = "bosch,bma254";
+ reg = <0x18>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
+ vddio-supply = <&ab8500_ldo_aux8_reg>; // 1.8V
+ vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
+ };
+ };
+
+ /* I2C3 */
+ i2c@80110000 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c3_c_2_default>;
+ pinctrl-1 = <&i2c3_c_2_sleep>;
+
+ /* TODO: write bindings and driver for this touchscreen */
+
+ /* Zinitix BT404 ISP part */
+ isp@50 {
+ compatible = "zinitix,bt404-isp";
+ reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+
+ /* Zinitix BT404 touchscreen, also has the touchkeys for menu and back */
+ touchscreen@20 {
+ compatible = "zinitix,bt404";
+ reg = <0x20>;
+ /* GPIO218 (TSP_INT_1V8) */
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+ vcca-supply = <&ab8500_ldo_aux2_reg>; // 3.3V
+ vdd-supply = <&ab8500_ldo_aux5_reg>; // 1.8V
+ zinitix,mode = <2>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <800>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsp_default>;
+ };
+ };
+
+ mcde@a0350000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dpi_default_mode>;
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+};
+
+&pinctrl {
+ /*
+ * This extends the MC0_A_2 default config to include
+ * the card detect GPIO217 line.
+ */
+ sdi0 {
+ mc0_a_2_default {
+ default_cfg4 {
+ pins = "GPIO217_AH12"; /* card detect */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ sdi2 {
+ /*
+ * GPIO130 should be set in GPIO mode and
+ * pulled down. (Not connected.)
+ */
+ mc2_a_1_default {
+ default_cfg2 {
+ pins = "GPIO130_C8"; /* FBCLK */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ /* GPIO that enables the 2.9V SD card level translator */
+ sd-level-translator {
+ sd_level_translator_default: sd_level_translator_default {
+ /* level shifter on GPIO87 */
+ codina_cfg1 {
+ pins = "GPIO87_B3";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the eMMC */
+ emmc-ldo {
+ emmc_ldo_en_default_mode: emmc_ldo_default {
+ /* LDO enable on GPIO223 */
+ codina_cfg1 {
+ pins = "GPIO223_AH9";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIOs for panel control */
+ panel {
+ panel_default_mode: panel_default {
+ codina_cfg1 {
+ /* Reset line */
+ pins = "GPIO139_C9";
+ ste,config = <&gpio_out_lo>;
+ };
+ codina_cfg2 {
+ /* ESD IRQ line "LCD detect" */
+ pins = "GPIO93_B7";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO that enables the LDO regulator for the LCD display */
+ lcd-ldo {
+ lcd_pwr_en_default_mode: lcd_pwr_en_default {
+ /* LCD_PWR_EN on GPIO219 */
+ codina_cfg1 {
+ pins = "GPIO219_AG10";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ /* GPIO that enables the WLAN internal LDO regulators */
+ wlan-ldo {
+ wlan_ldo_en_default: wlan_ldo_default {
+ /* GPIO215 named WLAN_RST_N */
+ codina_cfg1 {
+ pins = "GPIO215_AH13";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Backlight GPIO */
+ backlight {
+ ktd253_backlight_default_mode: backlight_default {
+ skomer_cfg1 {
+ pins = "GPIO69_E2"; /* LCD_BL_CTRL */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* Flash and torch */
+ flash {
+ gpio_flash_default_mode: flash_default {
+ codina_cfg1 {
+ pins = "GPIO140_B11", "GPIO141_C12";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ /* GPIO keys */
+ gpio-keys {
+ gpio_keys_default_mode: gpio_keys_default {
+ skomer_cfg1 {
+ pins = "GPIO67_G2", /* VOL UP */
+ "GPIO91_B6", /* HOME */
+ "GPIO92_D6"; /* VOL DOWN */
+ ste,config = <&gpio_in_pu>;
+ };
+ };
+ };
+ /* Interrupt line for the Zinitix BT404 touchscreen */
+ tsp {
+ tsp_default: tsp_default {
+ codina_cfg1 {
+ pins = "GPIO218_AH11"; /* TSP_INT_1V8 */
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* Interrupt line for light/proximity sensor TMD2672 */
+ tmd2672 {
+ tmd2672_codina_default: tmd2672_codina {
+ codina_cfg1 {
+ pins = "GPIO146_D13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for subpmu */
+ i2c-gpio-0 {
+ i2c_gpio_0_default: i2c_gpio_0 {
+ codina_cfg1 {
+ pins = "GPIO143_D12", "GPIO144_B13";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based I2C bus for the NFC */
+ i2c-gpio-1 {
+ i2c_gpio_1_default: i2c_gpio_1 {
+ codina_cfg1 {
+ pins = "GPIO151_D17", "GPIO152_D16";
+ ste,config = <&gpio_in_nopull>;
+ };
+ };
+ };
+ /* GPIO-based SPI bus for the display */
+ spi-gpio-0 {
+ spi_gpio_0_default: spi_gpio_0_d {
+ codina_cfg1 {
+ pins = "GPIO220_AH10", "GPIO201_AF24", "GPIO224_AG9";
+ ste,config = <&gpio_out_hi>;
+ };
+ codina_cfg2 {
+ pins = "GPIO225_AG8";
+ /* Needs pull down, no pull down resistor on board */
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ spi_gpio_0_sleep: spi_gpio_0_s {
+ codina_cfg1 {
+ pins = "GPIO220_AH10", "GPIO201_AF24",
+ "GPIO224_AG9", "GPIO225_AG8";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ wlan {
+ wlan_default_mode: wlan_default {
+ /* GPIO216 for WL_HOST_WAKE */
+ codina_cfg2 {
+ pins = "GPIO216_AG12";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
+ bluetooth {
+ bluetooth_default_mode: bluetooth_default {
+ /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */
+ codina_cfg1 {
+ pins = "GPIO199_AH23", "GPIO222_AJ9";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPIO97 BT_HOST_WAKE */
+ codina_cfg2 {
+ pins = "GPIO97_D9";
+ ste,config = <&gpio_in_nopull>;
+ };
+ /* GPIO209 BT_RST_N */
+ codina_cfg3 {
+ pins = "GPIO209_AG15";
+ ste,config = <&gpio_out_hi>;
+ };
+ };
+ };
+ vibrator {
+ vibrator_default: vibrator_default {
+ codina_cfg1 {
+ pins = "GPIO195_AG28"; /* MOT_EN */
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ mcde {
+ dpi_default_mode: dpi_default {
+ default_mux1 {
+ /* Mux in all the data lines */
+ function = "lcd";
+ groups =
+ /* Data lines D0-D7 GPIO70..GPIO77 */
+ "lcd_d0_d7_a_1",
+ /* Data lines D8-D11 GPIO78..GPIO81 */
+ "lcd_d8_d11_a_1",
+ /* Data lines D12-D15 GPIO82..GPIO85 */
+ "lcd_d12_d15_a_1",
+ /* Data lines D16-D23 GPIO161..GPIO168 */
+ "lcd_d16_d23_b_1";
+ };
+ default_mux2 {
+ function = "lcda";
+ /* Clock line on GPIO150, DE, VSO, HSO on GPIO169..GPIO171 */
+ groups = "lcdaclk_b_1", "lcda_b_1";
+ };
+ /* Input, no pull-up is the default state for pins used for an alt function */
+ default_cfg1 {
+ pins = "GPIO150_C14", "GPIO169_D22", "GPIO170_C23", "GPIO171_D23";
+ ste,config = <&in_nopull>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 1c1725d31c7c..b6746ac167bc 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -9,9 +9,13 @@
* the boot loader.
*
* The Samsung tree further talks about GT-I8160P and GT-I8160chn (China).
- * The GT-I8160 plain is knonw as the "europe" variant.
- * The GT-I8160P appears to not use the ST Microelectronics accelerometer.
+ * The GT-I8160 plain is known as the "europe" variant.
+ * The GT-I8160P is the CDMA version and it appears to not use the ST
+ * Microelectronics accelerometer and reportedly has NFC mounted.
* The GT-I8160chn appears to be the same as the europe variant.
+ *
+ * There is also the Codina-TMO, Samsung SGH-T599, which has its own device
+ * tree.
*/
/dts-v1/;
@@ -303,7 +307,22 @@
#address-cells = <1>;
#size-cells = <0>;
- /* TODO: add the NFC chip here */
+ nfc@2b {
+ /* NXP NFC circuit PN544 C1 marked NXP 44501 */
+ compatible = "nxp,pn544-i2c";
+ /* IF0, IF1 high, gives I2C address 0x2B */
+ reg = <0x2b>;
+ clock-frequency = <400000>;
+ /* NFC IRQ on GPIO32 */
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ /* GPIO 31 */
+ firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+ /* GPIO88 */
+ enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pn544_codina_default>;
+ };
};
spi-gpio-0 {
@@ -461,10 +480,20 @@
uart@80121000 {
status = "okay";
pinctrl-names = "default", "sleep";
- /* CTS/RTS is not used, CTS is repurposed as GPIO */
- pinctrl-0 = <&u1rxtx_a_1_default>;
- pinctrl-1 = <&u1rxtx_a_1_sleep>;
- /* FIXME: add a device for the GPS here */
+ pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
+ pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+ gnss {
+ compatible = "brcm,bcm4751";
+ /* GPS_RSTN on GPIO21 */
+ reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ /* GPS_ON_OFF on GPIO86 */
+ enable-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ /* GPS_1V8 (VSMPS2) */
+ vddio-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bcm4751_codina_default>;
+ };
};
/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -483,6 +512,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <36000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
@@ -515,10 +548,9 @@
pinctrl-0 = <&i2c0_a_1_default>;
pinctrl-1 = <&i2c0_a_1_sleep>;
- /* TODO: write bindings and driver for this proximity sensor */
proximity@39 {
- /* Codina has the Mouser TMD2672 */
- compatible = "mouser,tmd2672";
+ /* Codina has the Amstaos TMD2672 */
+ compatible = "amstaos,tmd2672";
clock-frequency = <400000>;
reg = <0x39>;
@@ -847,6 +879,34 @@
};
};
};
+ nfc {
+ pn544_codina_default: pn544_codina {
+ /* Interrupt line */
+ codina_cfg1 {
+ pins = "GPIO32_V2";
+ ste,config = <&gpio_in_nopull>;
+ };
+ /* Enable and firmware GPIOs */
+ codina_cfg2 {
+ pins = "GPIO31_V3", "GPIO88_C4";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
+ bcm4751 {
+ bcm4751_codina_default: bcm4751_codina {
+ /* Reset line, start out asserted */
+ codina_cfg1 {
+ pins = "GPIO21_AB3";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPS_ON_OFF, start out deasserted (off) */
+ codina_cfg2 {
+ pins = "GPIO86_C6";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
vibrator {
vibrator_default: vibrator_default {
codina_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index fd170974765f..53062d50e455 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -456,6 +456,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <43000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 290ab59e863d..b0dce91aff4b 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -304,6 +304,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <36000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
regulator-name = "sensor_3v";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 42762bfcd878..e6d4fd0eb5f4 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -485,7 +485,26 @@
/* CTS/RTS is not used, CTS is repurposed as GPIO */
pinctrl-0 = <&u1rxtx_a_1_default>;
pinctrl-1 = <&u1rxtx_a_1_sleep>;
- /* FIXME: add a device for the GPS here */
+
+ gnss {
+ /*
+ * The Low Noise Amplifier (LNA) power and enablement is controlled
+ * autonomously by the GSD4t.
+ * Janice has a SiRFstarIV-based GSD4t
+ * Golden has a SiRFstarV 5t-based CSRG05TA03-ICJE-R.
+ */
+ compatible = "csr,gsd4t";
+ /* GPS_RSTN on GPIO21 */
+ reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ /* GPS_ON_OFF on GPIO96 */
+ sirf,onoff-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ /* GPS_1V8 (VSMPS2) */
+ vcc-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsd4t_janice_default>;
+ /* According to /etc/sirfgps.conf */
+ current-speed = <460800>;
+ };
};
/* Debugging console UART connected to TSU6111RSVR (FSA880) */
@@ -504,6 +523,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <15000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
@@ -941,4 +964,23 @@
};
};
};
+ gsd4t {
+ gsd4t_janice_default: gsd4t_janice {
+ /* Reset line, start out asserted */
+ janice_cfg1 {
+ pins = "GPIO21_AB3";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* GPS_ON_OFF, start out deasserted (off) */
+ janice_cfg2 {
+ pins = "GPIO96_D8";
+ ste,config = <&gpio_out_lo>;
+ };
+ /* Unused power enablement line, used in R0.0 and R0.1 boards */
+ janice_cfg3 {
+ pins = "GPIO86_C6";
+ ste,config = <&gpio_in_pd>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 2a5bf54137ce..c57676faf181 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -325,6 +325,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <36000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index dcb03ce7cbd4..81b341a5ae45 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -281,12 +281,27 @@
};
};
- /* GPF UART */
+ /* GPS UART */
uart@80121000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>;
pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>;
+
+ gnss {
+ /* The CSRG05TA03-ICJE-R is a SirfStarV 5t chip */
+ compatible = "csr,csrg05ta03-icje-r";
+ /* GPS_RSTN on GPIO209 */
+ reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
+ /* GPS_ON_OFF on GPIO86 */
+ sirf,onoff-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ /* GPS_1V8 (VSMPS2) */
+ vcc-supply = <&db8500_vsmps2_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&g05ta03_skomer_default>;
+ /* According to /etc/sirfgps.conf */
+ current-speed = <460800>;
+ };
};
/* Debugging console UART connected to AB8505 USB */
@@ -305,6 +320,10 @@
pinctrl-1 = <&usb_a_1_sleep>;
};
+ ab8500_fg {
+ line-impedance-micro-ohms = <16000>;
+ };
+
regulator {
ab8500_ldo_aux1 {
/* Used for VDD for sensors */
@@ -649,6 +668,20 @@
};
};
};
+ g05ta03 {
+ g05ta03_skomer_default: g05ta03 {
+ /* Reset line, start out de-asserted */
+ skomer_cfg1 {
+ pins = "GPIO209_AG15";
+ ste,config = <&gpio_out_hi>;
+ };
+ /* GPS_ON_OFF, start out deasserted (off) */
+ skomer_cfg2 {
+ pins = "GPIO86_C6";
+ ste,config = <&gpio_out_lo>;
+ };
+ };
+ };
};
&ab8505_gpio {
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 155d9ffacc83..500bcc302d42 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -45,7 +45,7 @@
/ {
soc {
- pinctrl: pin-controller@40020000 {
+ pinctrl: pinctrl@40020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 1cf8a23c2644..8f37aefa7315 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -9,7 +9,7 @@
/ {
soc {
- pinctrl: pin-controller@40020000 {
+ pinctrl: pinctrl@40020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x40020000 0x3000>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 6e42ca2dada2..91dde07a38ba 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -583,7 +583,7 @@
status = "disabled";
};
- pinctrl: pin-controller@58020000 {
+ pinctrl: pinctrl@58020000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32h743-pinctrl";
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 1708c79b5254..f9ebc47e6421 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -75,6 +75,12 @@
compatible = "fixed-clock";
clock-frequency = <99000000>;
};
+
+ clk_rtc_k: clk-rtc-k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
};
intc: interrupt-controller@a0021000 {
@@ -218,6 +224,15 @@
status = "disabled";
};
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_pclk4>, <&clk_rtc_k>;
+ clock-names = "pclk", "rtc_ck";
+ status = "disabled";
+ };
+
bsec: efuse@5c005000 {
compatible = "st,stm32mp15-bsec";
reg = <0x5c005000 0x400>;
@@ -239,11 +254,13 @@
* Break node order to solve dependency probe issue between
* pinctrl and exti.
*/
- pinctrl: pin-controller@50002000 {
+ pinctrl: pinctrl@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp135-pinctrl";
ranges = <0 0x50002000 0x8400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
pins-are-numbered;
gpioa: gpio@50002000 {
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index ee100d108ea2..09d6226d598f 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -6,6 +6,9 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "stm32mp135.dtsi"
#include "stm32mp13xf.dtsi"
#include "stm32mp13-pinctrl.dtsi"
@@ -23,6 +26,28 @@
reg = <0xc0000000 0x20000000>;
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user-pa13 {
+ label = "User-PA13";
+ linux,code = <BTN_1>;
+ gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
vdd_sd: vdd-sd {
compatible = "regulator-fixed";
regulator-name = "vdd_sd";
@@ -37,6 +62,10 @@
status = "okay";
};
+&rtc {
+ status = "okay";
+};
+
&sdmmc1 {
pinctrl-names = "default", "opendrain", "sleep";
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index f0d66d8c6e3b..6052243ad81c 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -379,6 +379,40 @@
};
};
+ ethernet0_rmii_pins_c: rmii-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rmii_sleep_pins_c: rmii-sleep-2 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+ };
+ };
+
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -889,6 +923,21 @@
};
};
+ mco2_pins_a: mco2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ mco2_sleep_pins_a: mco2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 2, ANALOG)>; /* MCO2 */
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -2212,4 +2261,19 @@
bias-disable;
};
};
+
+ spi1_pins_b: spi1-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index f9aa9af31efd..1b2fd3426a81 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -115,6 +115,33 @@
status = "disabled";
};
+ firmware {
+ optee: optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ status = "disabled";
+ };
+
+ scmi: scmi {
+ compatible = "linaro,scmi-optee";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ linaro,optee-channel-id = <0>;
+ shmem = <&scmi_shm>;
+ status = "disabled";
+
+ scmi_clk: protocol@14 {
+ reg = <0x14>;
+ #clock-cells = <1>;
+ };
+
+ scmi_reset: protocol@16 {
+ reg = <0x16>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -122,6 +149,20 @@
interrupt-parent = <&intc>;
ranges;
+ scmi_sram: sram@2ffff000 {
+ compatible = "mmio-sram";
+ reg = <0x2ffff000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2ffff000 0x1000>;
+
+ scmi_shm: scmi-sram@0 {
+ compatible = "arm,scmi-shmem";
+ reg = <0 0x80>;
+ status = "disabled";
+ };
+ };
+
timers2: timer@40000000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -1623,7 +1664,7 @@
* Break node order to solve dependency probe issue between
* pinctrl and exti.
*/
- pinctrl: pin-controller@50002000 {
+ pinctrl: pinctrl@50002000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-pinctrl";
@@ -1754,7 +1795,7 @@
};
};
- pinctrl_z: pin-controller-z@54004000 {
+ pinctrl_z: pinctrl@54004000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp157-z-pinctrl";
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
new file mode 100644
index 000000000000..75874eafde11
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1a.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+ model = "Protonic PRTT1A";
+ compatible = "prt,prtt1a", "st,stm32mp151";
+};
+
+&ethernet0 {
+ phy-handle = <&phy0>;
+};
+
+&mdio0 {
+ /* TI DP83TD510E */
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id2000.0181";
+ reg = <0>;
+ interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+};
+
+&pwm5_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
+ };
+};
+
+&pwm5_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
+ };
+};
+
+&timers5 {
+ status = "okay";
+
+ pwm {
+ pinctrl-0 = <&pwm5_pins_a>;
+ pinctrl-1 = <&pwm5_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
new file mode 100644
index 000000000000..7ecf31263abc
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1c.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+ model = "Protonic PRTT1C";
+ compatible = "prt,prtt1c", "st,stm32mp151";
+
+ clock_ksz9031: clock-ksz9031 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clock_sja1105: clock-sja1105 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+ &gpioa 2 GPIO_ACTIVE_HIGH>;
+
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpiod 8 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ethernet0 {
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+};
+
+&gpioa {
+ gpio-line-names =
+ "", "", "", "PHY0_nRESET", "PHY0_nINT", "", "", "",
+ "", "", "", "", "", "", "", "SPI1_nSS";
+};
+
+&gpiod {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "WFM_RESET", "", "", "", "", "", "", "";
+};
+
+&gpioe {
+ gpio-line-names =
+ "SDMMC2_nRESET", "", "", "", "", "", "SPI1_nRESET", "",
+ "", "", "", "", "WFM_nIRQ", "", "", "";
+};
+
+&gpiog {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "PHY3_nINT",
+ "PHY1_nINT", "PHY3_nRESET", "PHY2_nINT", "PHY2_nRESET",
+ "PHY1_nRESET", "SPE1_PWR", "SPE0_PWR", "";
+};
+
+&mdio0 {
+ /* All this DP83TD510E PHYs can't be probed before switch@0 is
+ * probed so we need to use compatible with PHYid
+ */
+ /* TI DP83TD510E */
+ t1l0_phy: ethernet-phy@6 {
+ compatible = "ethernet-phy-id2000.0181";
+ reg = <6>;
+ interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TD510E */
+ t1l1_phy: ethernet-phy@7 {
+ compatible = "ethernet-phy-id2000.0181";
+ reg = <7>;
+ interrupts-extended = <&gpiog 8 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpiog 12 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* TI DP83TD510E */
+ t1l2_phy: ethernet-phy@10 {
+ compatible = "ethernet-phy-id2000.0181";
+ reg = <10>;
+ interrupts-extended = <&gpiog 10 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpiog 11 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+
+ /* Micrel KSZ9031 */
+ rj45_phy: ethernet-phy@2 {
+ reg = <2>;
+ interrupts-extended = <&gpiog 7 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <1000>;
+
+ clocks = <&clock_ksz9031>;
+ };
+};
+
+&qspi {
+ status = "disabled";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>;
+ pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ no-1-8-v;
+ st,neg-edge;
+ bus-width = <8>;
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&sdmmc2_b4_od_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ };
+};
+
+&sdmmc2_b4_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ };
+};
+
+&sdmmc2_b4_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+};
+
+&sdmmc2_d47_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+ };
+};
+
+&sdmmc2_d47_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+ };
+};
+
+&sdmmc3 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_b>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+ non-removable;
+ no-1-8-v;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ mmc@1 {
+ compatible = "prt,prtt1c-wfm200", "silabs,wf200";
+ reg = <1>;
+ };
+};
+
+&sdmmc3_b4_od_pins_b {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+ };
+};
+
+&sdmmc3_b4_pins_b {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+ };
+};
+
+&sdmmc3_b4_sleep_pins_b {
+ pins {
+ pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+ };
+};
+
+&spi1 {
+ pinctrl-0 = <&spi1_pins_b>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ switch@0 {
+ compatible = "nxp,sja1105q";
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+ spi-rx-delay-us = <1>;
+ spi-tx-delay-us = <1>;
+ spi-cpha;
+
+ reset-gpios = <&gpioe 6 GPIO_ACTIVE_LOW>;
+
+ clocks = <&clock_sja1105>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "t1l0";
+ phy-mode = "rmii";
+ phy-handle = <&t1l0_phy>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "t1l1";
+ phy-mode = "rmii";
+ phy-handle = <&t1l1_phy>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "t1l2";
+ phy-mode = "rmii";
+ phy-handle = <&t1l2_phy>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "rj45";
+ phy-handle = <&rj45_phy>;
+ phy-mode = "rgmii-id";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "cpu";
+ ethernet = <&ethernet0>;
+ phy-mode = "rmii";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
new file mode 100644
index 000000000000..d865ab5d866b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxad-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ ethernet0 = &ethernet0;
+ mdio-gpio0 = &mdio0;
+ serial0 = &uart4;
+ };
+
+ led-controller-0 {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+
+ /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce
+ * stmmac MDC clock without reducing system bus rate, we need to use
+ * gpio based MDIO bus.
+ */
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpioc 1 GPIO_ACTIVE_HIGH
+ &gpioa 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&dts {
+ status = "okay";
+};
+
+&ethernet0 {
+ pinctrl-0 = <&ethernet0_rmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rmii";
+ status = "okay";
+};
+
+&ethernet0_rmii_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+ };
+};
+
+&ethernet0_rmii_sleep_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
+ };
+};
+
+&iwdg2 {
+ status = "okay";
+};
+
+&qspi {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+ reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <104000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&qspi_bk1_pins_a {
+ pins1 {
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_3v3>;
+ status = "okay";
+};
+
+&sdmmc1_b4_od_pins_a {
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
+&sdmmc1_b4_pins_a {
+ pins1 {
+ bias-pull-up;
+ };
+ pins2 {
+ bias-pull-up;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default", "sleep", "idle";
+ pinctrl-0 = <&uart4_pins_a>;
+ pinctrl-1 = <&uart4_sleep_pins_a>;
+ pinctrl-2 = <&uart4_idle_pins_a>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+};
+
+&uart4_idle_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-pull-up;
+ };
+};
+
+&uart4_pins_a {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-pull-up;
+ };
+};
+
+&uart4_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+ };
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ phy-names = "usb";
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "host";
+ pinctrl-0 = <&usbotg_hs_pins_a>;
+ pinctrl-names = "default";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&reg_3v3>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&reg_3v3>;
+};
diff --git a/arch/arm/boot/dts/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
new file mode 100644
index 000000000000..ad25929e64e6
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp151a-prtt1s.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) Protonic Holland
+ * Author: David Jander <david@protonic.nl>
+ */
+/dts-v1/;
+
+#include "stm32mp151a-prtt1l.dtsi"
+
+/ {
+ model = "Protonic PRTT1S";
+ compatible = "prt,prtt1s", "st,stm32mp151";
+};
+
+&ethernet0 {
+ phy-handle = <&phy0>;
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_sleep_pins_a>;
+ clock-frequency = <100000>;
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "okay";
+
+ humidity-sensor@40 {
+ compatible = "ti,hdc1080";
+ reg = <0x40>;
+ };
+
+ co2-sensor@62 {
+ compatible = "sensirion,scd41";
+ reg = <0x62>;
+ };
+};
+
+&i2c1_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
+ };
+};
+
+&i2c1_sleep_pins_a {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
+ };
+};
+
+&mdio0 {
+ /* TI DP83TD510E */
+ phy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-id2000.0181";
+ reg = <0>;
+ interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <35>;
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
new file mode 100644
index 000000000000..e3d3f3f30c7d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157a-dk1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
+ compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157";
+
+ reserved-memory {
+ optee@de000000 {
+ reg = <0xde000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&optee {
+ status = "okay";
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi {
+ status = "okay";
+};
+
+&scmi_shm {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
new file mode 100644
index 000000000000..45dcd299aa9e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-dk2.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
+ compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ reserved-memory {
+ optee@de000000 {
+ reg = <0xde000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&optee {
+ status = "okay";
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi {
+ status = "okay";
+};
+
+&scmi_shm {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
new file mode 100644
index 000000000000..458e0ca3cded
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
+ compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ reserved-memory {
+ optee@fe000000 {
+ reg = <0xfe000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&optee {
+ status = "okay";
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi {
+ status = "okay";
+};
+
+&scmi_shm {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
new file mode 100644
index 000000000000..df9c113edb4b
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c-ev1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1",
+ "st,stm32mp157";
+
+ reserved-memory {
+ optee@fe000000 {
+ reg = <0xfe000000 0x2000000>;
+ no-map;
+ };
+ };
+};
+
+&cpu0 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+ clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+ clocks = <&scmi_clk CK_SCMI_CRYP1>;
+ resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&dsi {
+ clocks = <&rcc DSI_K>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+ clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+ clocks = <&scmi_clk CK_SCMI_HASH1>;
+ resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c4 {
+ clocks = <&scmi_clk CK_SCMI_I2C4>;
+ resets = <&scmi_reset RST_SCMI_I2C4>;
+};
+
+&iwdg2 {
+ clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+};
+
+&m_can1 {
+ clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
+};
+
+&mdma1 {
+ resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&mlahb {
+ resets = <&scmi_reset RST_SCMI_MCU>;
+};
+
+&optee {
+ status = "okay";
+};
+
+&rcc {
+ compatible = "st,stm32mp1-rcc-secure", "syscon";
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&scmi_clk CK_SCMI_HSE>,
+ <&scmi_clk CK_SCMI_HSI>,
+ <&scmi_clk CK_SCMI_CSI>,
+ <&scmi_clk CK_SCMI_LSE>,
+ <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+ clocks = <&scmi_clk CK_SCMI_RNG1>;
+ resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+ clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi {
+ status = "okay";
+};
+
+&scmi_shm {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 83e2c87713f8..238a611192e7 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -118,13 +118,12 @@
&ethernet0 {
status = "okay";
- pinctrl-0 = <&ethernet0_rmii_pins_a>;
- pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+ pinctrl-0 = <&ethernet0_rmii_pins_c &mco2_pins_a>;
+ pinctrl-1 = <&ethernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>;
pinctrl-names = "default", "sleep";
phy-mode = "rmii";
max-speed = <100>;
phy-handle = <&phy0>;
- st,eth-ref-clk-sel;
mdio0 {
#address-cells = <1>;
@@ -136,7 +135,7 @@
/* LAN8710Ai */
compatible = "ethernet-phy-id0007.c0f0",
"ethernet-phy-ieee802.3-c22";
- clocks = <&rcc ETHCK_K>;
+ clocks = <&rcc CK_MCO2>;
reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
reset-assert-us = <500>;
reset-deassert-us = <500>;
@@ -446,6 +445,21 @@
};
};
+&rcc {
+ /* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */
+ clocks = <&rcc CK_MCO2>;
+ clock-names = "ETH_RX_CLK/ETH_REF_CLK";
+
+ /*
+ * Set PLL4P output to 100 MHz to supply SDMMC with faster clock,
+ * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2,
+ * so that MCO2 behaves as a divider for the ETHRX clock here.
+ */
+ assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>;
+ assigned-clock-parents = <&rcc PLL4_P>;
+ assigned-clock-rates = <50000000>, <100000000>;
+};
+
&rng1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 61e17f44ce81..76c54b006d87 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -141,6 +141,7 @@
compatible = "snps,dwmac-mdio";
reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
reset-delay-us = <1000>;
+ reset-post-delay-us = <1000>;
phy0: ethernet-phy@7 {
reg = <7>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
index fc45d5aaa67f..a9f749f49beb 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -75,7 +75,6 @@
r_gpio_keys {
compatible = "gpio-keys";
- input-name = "k1";
k1 {
label = "k1";
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index a1154e6c7cb5..04e59b8381cb 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -11,12 +11,43 @@
compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
aliases {
+ mmc0 = &mmc0;
serial0 = &uart0;
+ spi0 = &spi0;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ status = "okay";
+ vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pc_pins>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "winbond,w25q128", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ };
};
&uart0 {
diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index 6100d3b75f61..0edc1724407b 100644
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
* Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
*/
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
@@ -26,9 +29,13 @@
};
cpus {
- cpu {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
compatible = "arm,arm926ej-s";
device_type = "cpu";
+ reg = <0x0>;
};
};
@@ -62,6 +69,70 @@
};
};
+ spi0: spi@1c05000 {
+ compatible = "allwinner,suniv-f1c100s-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c05000 0x1000>;
+ interrupts = <10>;
+ clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI0>;
+ status = "disabled";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi1: spi@1c06000 {
+ compatible = "allwinner,suniv-f1c100s-spi",
+ "allwinner,sun8i-h3-spi";
+ reg = <0x01c06000 0x1000>;
+ interrupts = <11>;
+ clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+ clock-names = "ahb", "mod";
+ resets = <&ccu RST_BUS_SPI1>;
+ status = "disabled";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc0: mmc@1c0f000 {
+ compatible = "allwinner,suniv-f1c100s-mmc",
+ "allwinner,sun7i-a20-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>,
+ <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <23>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc@1c10000 {
+ compatible = "allwinner,suniv-f1c100s-mmc",
+ "allwinner,sun7i-a20-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>,
+ <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <24>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
ccu: clock@1c20000 {
compatible = "allwinner,suniv-f1c100s-ccu";
reg = <0x01c20000 0x400>;
@@ -82,13 +153,24 @@
compatible = "allwinner,suniv-f1c100s-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <38>, <39>, <40>;
- clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ };
+
+ spi0_pc_pins: spi0-pc-pins {
+ pins = "PC0", "PC1", "PC2", "PC3";
+ function = "spi0";
+ };
+
uart0_pe_pins: uart0-pe-pins {
pins = "PE0", "PE1";
function = "uart0";
@@ -98,14 +180,16 @@
timer@1c20c00 {
compatible = "allwinner,suniv-f1c100s-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <13>;
+ interrupts = <13>, <14>, <15>;
clocks = <&osc24M>;
};
wdt: watchdog@1c20ca0 {
compatible = "allwinner,suniv-f1c100s-wdt",
- "allwinner,sun4i-a10-wdt";
+ "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
+ interrupts = <16>;
+ clocks = <&osc32k>;
};
uart0: serial@1c25000 {
@@ -114,8 +198,8 @@
interrupts = <1>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 38>;
- resets = <&ccu 24>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -125,8 +209,8 @@
interrupts = <2>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 39>;
- resets = <&ccu 25>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -136,8 +220,8 @@
interrupts = <3>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&ccu 40>;
- resets = <&ccu 26>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 47c2a4b14c06..c193264a86ff 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -343,8 +343,6 @@
<0 40 4>, <0 41 4>,
<0 42 4>, <0 43 4>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <4>;
clocks = <&clkc 27>;
clock-names = "apb_pclk";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index ec7e2c0e82c1..bfb806cf6d7a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -58,6 +58,15 @@
};
};
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
@@ -74,6 +83,10 @@
cpu-supply = <&reg_dcdc2>;
};
+&dai {
+ status = "okay";
+};
+
&de {
status = "okay";
};
@@ -328,6 +341,23 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>;
+ simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
+ "Microphone", "Microphone Jack Right",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing = "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "Headphone Jack", "HP",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
+ "Microphone Jack Left", "MBIAS",
+ "MIC1", "Microphone Jack Left",
+ "Microphone Jack Right", "MBIAS",
+ "MIC2", "Microphone Jack Right";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index aff0660b899c..1128030e4c25 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -197,6 +197,14 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dldo2>;
+ vcc-pe-supply = <&reg_aldo1>;
+ vcc-pf-supply = <&reg_dcdc1>; /* No dedicated supply-pin for this */
+ vcc-pg-supply = <&reg_aldo2>;
+};
+
&pwm {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 884bda106399..aa2bba75265f 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -346,8 +346,6 @@
<0 88 4>,
<0 89 4>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
clock-names = "apb_pclk";
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0eec18678311..8773211df50e 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -1,17 +1,18 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
@@ -19,29 +20,29 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-mecool-kii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
@@ -52,15 +53,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
index 561eec21b4de..8b0d586aa84e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
@@ -18,7 +18,7 @@
model = "JetHome JetHub J100";
aliases {
serial0 = &uart_AO; /* Console */
- serial1 = &uart_AO_B; /* External UART (Wireless Module) */
+ serial2 = &uart_AO_B; /* External UART (Wireless Module) */
ethernet0 = &ethmac;
};
@@ -81,6 +81,15 @@
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vccq_1v8: regulator-vccq_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCCQ_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
@@ -248,8 +257,7 @@
bus-width = <4>;
cap-sd-highspeed;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -282,7 +290,7 @@
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vqmmc-supply = <&vccq_1v8>;
};
/* UART Bluetooth */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
index 2d7032f41e4b..bcdf55f48a83 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi
@@ -416,7 +416,7 @@
pinctrl-names = "default";
status = "okay";
- gd25lq128: spi-flash@0 {
+ gd25lq128: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 2d769203f671..213a0705ebdc 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -298,7 +298,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- w25q32: spi-flash@0 {
+ w25q32: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index 6eafb908695f..fcb304c5a40f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -213,6 +213,12 @@
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "realtek,rtl8822cs-bt";
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+ };
};
&uart_C {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
index 93d8f8aff70d..874f91c348ec 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc-v2.dts
@@ -284,7 +284,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- nor_4u1: spi-flash@0 {
+ nor_4u1: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 86bdc0baf032..f43c45daf7eb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -374,7 +374,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- w25q32: spi-flash@0 {
+ w25q32: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q16", "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 3cf4ecb6d52e..c9705941e4ab 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -458,7 +458,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- w25q128: spi-flash@0 {
+ w25q128: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "winbond,w25q128fw", "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 480afa2cc61f..ff213618a598 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
cpus {
@@ -60,6 +61,12 @@
#clock-cells = <0>;
};
+ pwrc: power-controller {
+ compatible = "amlogic,meson-s4-pwrc";
+ #power-domain-cells = <1>;
+ status = "okay";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -85,6 +92,32 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+ periphs_pinctrl: pinctrl@4000 {
+ compatible = "amlogic,meson-s4-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@4000 {
+ reg = <0x0 0x4000 0x0 0x004c>,
+ <0x0 0x40c0 0x0 0x0220>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 82>;
+ };
+ };
+
+ gpio_intc: interrupt-controller@4080 {
+ compatible = "amlogic,meson-s4-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0x4080 0x0 0x20>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <10 11 12 13 14 15 16 17 18 19 20 21>;
+ };
+
uart_B: serial@7a000 {
compatible = "amlogic,meson-s4-uart",
"amlogic,meson-ao-uart";
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
index f3f953225bf5..e3486f60645a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -121,7 +121,7 @@
pinctrl-0 = <&nor_pins>;
pinctrl-names = "default";
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 4382b73baef5..d908e96d7ddc 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb ju
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += corstone1000-fvp.dtb corstone1000-mps3.dtb
diff --git a/arch/arm64/boot/dts/arm/corstone1000-fvp.dts b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
new file mode 100644
index 000000000000..26b0f1b3cea6
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-fvp.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FVP (Fixed Virtual Platform)";
+ compatible = "arm,corstone1000-fvp";
+
+ smsc: ethernet@4010000 {
+ compatible = "smsc,lan91c111";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ };
+
+ vmmc_v3_3d: fixed_v3_3d {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdmmc0: mmc@40300000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x40300000 0x1000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&vmmc_v3_3d>;
+ clocks = <&smbclk>, <&refclk100mhz>;
+ clock-names = "smclk", "apb_pclk";
+ };
+
+ sdmmc1: mmc@50000000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x50000000 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&vmmc_v3_3d>;
+ clocks = <&smbclk>, <&refclk100mhz>;
+ clock-names = "smclk", "apb_pclk";
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000-mps3.dts b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
new file mode 100644
index 000000000000..e3146747c2d9
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000-mps3.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+/dts-v1/;
+
+#include "corstone1000.dtsi"
+
+/ {
+ model = "ARM Corstone1000 FPGA MPS3 board";
+ compatible = "arm,corstone1000-mps3";
+
+ smsc: ethernet@4010000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x40100000 0x10000>;
+ phy-mode = "mii";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <2>;
+ smsc,irq-push-pull;
+ };
+
+ usb_host: usb@40200000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <0x40200000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <16>;
+ dr_mode = "host";
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/corstone1000.dtsi b/arch/arm64/boot/dts/arm/corstone1000.dtsi
new file mode 100644
index 000000000000..4e46826f883a
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/corstone1000.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ memory@88200000 {
+ device_type = "memory";
+ reg = <0x88200000 0x77e00000>;
+ };
+
+ gic: interrupt-controller@1c000000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1c010000 0x1000>,
+ <0x1c02f000 0x2000>,
+ <0x1c04f000 0x1000>,
+ <0x1c06f000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ };
+
+ refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ smbclk: refclk24mhzx2 {
+ /* Reference 24MHz clock x 2 */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "smclk";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ uartclk: uartclk {
+ /* UART clock - 50MHz */
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "uartclk";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ timer@1a220000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x1a220000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clock-frequency = <50000000>;
+ ranges;
+
+ frame@1a230000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x1a230000 0x1000>;
+ };
+ };
+
+ uart0: serial@1a510000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a510000 0x1000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ uart1: serial@1a520000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1a520000 0x1000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ mhu_hse1: mailbox@1b820000 {
+ compatible = "arm,mhuv2-tx", "arm,primecell";
+ reg = <0x1b820000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ arm,mhuv2-protocols = <0 0>;
+ secure-status = "okay"; /* secure-world-only */
+ status = "disabled";
+ };
+
+ mhu_seh1: mailbox@1b830000 {
+ compatible = "arm,mhuv2-rx", "arm,primecell";
+ reg = <0x1b830000 0x1000>;
+ clocks = <&refclk100mhz>;
+ clock-names = "apb_pclk";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ arm,mhuv2-protocols = <0 0>;
+ secure-status = "okay"; /* secure-world-only */
+ status = "disabled";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
index fbf13f7c2baf..83e3e7e3984f 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dtsi
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -220,7 +220,7 @@
clock-names = "uartclk", "apb_pclk";
};
- virtio-block@130000 {
+ virtio@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
index 269b649934b5..a496e39e6204 100644
--- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts
+++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts
@@ -241,6 +241,7 @@
<0 0 41 &gic 0 0 GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
<0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 46 &gic 0 0 GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 446c8f476eec..065381c1cbf5 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -117,7 +117,7 @@
* The actual size is just 4K though 64K is reserved. Access to the
* unmapped reserved region results in a DECERR response.
*/
- etf@20010000 { /* etf0 */
+ etf_sys0: etf@20010000 { /* etf0 */
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20010000 0 0x1000>;
@@ -141,7 +141,7 @@
};
};
- tpiu@20030000 {
+ tpiu_sys: tpiu@20030000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0 0x20030000 0 0x1000>;
@@ -194,7 +194,7 @@
};
};
- etr@20070000 {
+ etr_sys: etr@20070000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20070000 0 0x1000>;
iommus = <&smmu_etr 0>;
@@ -212,7 +212,7 @@
};
};
- stm@20100000 {
+ stm_sys: stm@20100000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x20100000 0 0x1000>,
<0 0x28000000 0 0x1000000>;
@@ -289,6 +289,18 @@
};
};
+ cti0: cti@22020000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x22020000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm0>;
+ };
+
funnel@220c0000 { /* cluster0 funnel */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x220c0000 0 0x1000>;
@@ -349,6 +361,18 @@
};
};
+ cti1: cti@22120000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x22120000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm1>;
+ };
+
cpu_debug2: cpu-debug@23010000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23010000 0x0 0x1000>;
@@ -374,6 +398,18 @@
};
};
+ cti2: cti@23020000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x23020000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm2>;
+ };
+
funnel@230c0000 { /* cluster1 funnel */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x230c0000 0 0x1000>;
@@ -446,6 +482,18 @@
};
};
+ cti3: cti@23120000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x23120000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm3>;
+ };
+
cpu_debug4: cpu-debug@23210000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23210000 0x0 0x1000>;
@@ -471,6 +519,18 @@
};
};
+ cti4: cti@23220000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x23220000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm4>;
+ };
+
cpu_debug5: cpu-debug@23310000 {
compatible = "arm,coresight-cpu-debug", "arm,primecell";
reg = <0x0 0x23310000 0x0 0x1000>;
@@ -496,6 +556,100 @@
};
};
+ cti5: cti@23320000 {
+ compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+ "arm,primecell";
+ reg = <0 0x23320000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ arm,cs-dev-assoc = <&etm5>;
+ };
+
+ cti_sys0: cti@20020000 { /* sys_cti_0 */
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0 0x20020000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trig-conns@0 {
+ reg = <0>;
+ arm,trig-in-sigs=<2 3>;
+ arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs=<0 1>;
+ arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,cs-dev-assoc = <&etr_sys>;
+ };
+
+ trig-conns@1 {
+ reg = <1>;
+ arm,trig-in-sigs=<0 1>;
+ arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs=<7 6>;
+ arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,cs-dev-assoc = <&etf_sys0>;
+ };
+
+ trig-conns@2 {
+ reg = <2>;
+ arm,trig-in-sigs=<4 5 6 7>;
+ arm,trig-in-types=<STM_TOUT_SPTE STM_TOUT_SW
+ STM_TOUT_HETE STM_ASYNCOUT>;
+ arm,trig-out-sigs=<4 5>;
+ arm,trig-out-types=<STM_HWEVENT STM_HWEVENT>;
+ arm,cs-dev-assoc = <&stm_sys>;
+ };
+
+ trig-conns@3 {
+ reg = <3>;
+ arm,trig-out-sigs=<2 3>;
+ arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,cs-dev-assoc = <&tpiu_sys>;
+ };
+ };
+
+ cti_sys1: cti@20110000 { /* sys_cti_1 */
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0 0x20110000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trig-conns@0 {
+ reg = <0>;
+ arm,trig-in-sigs=<0>;
+ arm,trig-in-types=<GEN_INTREQ>;
+ arm,trig-out-sigs=<0>;
+ arm,trig-out-types=<GEN_HALTREQ>;
+ arm,trig-conn-name = "sys_profiler";
+ };
+
+ trig-conns@1 {
+ reg = <1>;
+ arm,trig-out-sigs=<2 3>;
+ arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-conn-name = "watchdog";
+ };
+
+ trig-conns@2 {
+ reg = <2>;
+ arm,trig-out-sigs=<1 6>;
+ arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+ arm,trig-conn-name = "g_counter";
+ };
+ };
+
gpu: gpu@2d000000 {
compatible = "arm,juno-mali", "arm,mali-t624";
reg = <0 0x2d000000 0 0x10000>;
@@ -675,8 +829,6 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0x7ff00000 0 0x1000>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index eda3d9e18af6..2e43f4531308 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -23,7 +23,7 @@
};
};
- etf@20140000 { /* etf1 */
+ etf_sys1: etf@20140000 { /* etf1 */
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20140000 0 0x1000>;
@@ -82,4 +82,39 @@
};
};
+
+ cti_sys2: cti@20160000 { /* sys_cti_2 */
+ compatible = "arm,coresight-cti", "arm,primecell";
+ reg = <0 0x20160000 0 0x1000>;
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ trig-conns@0 {
+ reg = <0>;
+ arm,trig-in-sigs=<0 1>;
+ arm,trig-in-types=<SNK_FULL SNK_ACQCOMP>;
+ arm,trig-out-sigs=<0 1>;
+ arm,trig-out-types=<SNK_FLUSHIN SNK_TRIGIN>;
+ arm,cs-dev-assoc = <&etf_sys1>;
+ };
+
+ trig-conns@1 {
+ reg = <1>;
+ arm,trig-in-sigs=<2 3 4>;
+ arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+ arm,trig-conn-name = "ela_clus_0";
+ };
+
+ trig-conns@2 {
+ reg = <2>;
+ arm,trig-in-sigs=<5 6 7>;
+ arm,trig-in-types=<ELA_DBGREQ ELA_TSTART ELA_TSTOP>;
+ arm,trig-conn-name = "ela_clus_1";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
index 190a0fba4ad6..dd9ea69f086f 100644
--- a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
@@ -7,14 +7,18 @@
};
etf@20140000 {
- power-domains = <&scmi_devpd 0>;
+ power-domains = <&scmi_devpd 8>;
};
funnel@20150000 {
- power-domains = <&scmi_devpd 0>;
+ power-domains = <&scmi_devpd 8>;
};
};
+&cti_sys2 {
+ power-domains = <&scmi_devpd 8>;
+};
+
&A57_0 {
clocks = <&scmi_dvfs 0>;
};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 0e24e29eb9b1..f099fb611d4e 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
#include "juno-base.dtsi"
#include "juno-cs-r1r2.dtsi"
@@ -313,3 +314,27 @@
&cpu_debug5 {
cpu = <&A53_3>;
};
+
+&cti0 {
+ cpu = <&A57_0>;
+};
+
+&cti1 {
+ cpu = <&A57_1>;
+};
+
+&cti2 {
+ cpu = <&A53_0>;
+};
+
+&cti3 {
+ cpu = <&A53_1>;
+};
+
+&cti4 {
+ cpu = <&A53_2>;
+};
+
+&cti5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
index dbf13770084f..de2cbac1d1c3 100644
--- a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
@@ -7,14 +7,18 @@
};
etf@20140000 {
- power-domains = <&scmi_devpd 0>;
+ power-domains = <&scmi_devpd 8>;
};
funnel@20150000 {
- power-domains = <&scmi_devpd 0>;
+ power-domains = <&scmi_devpd 8>;
};
};
+&cti_sys2 {
+ power-domains = <&scmi_devpd 8>;
+};
+
&A72_0 {
clocks = <&scmi_dvfs 0>;
};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index e609420ce3e4..709389582ae3 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
#include "juno-base.dtsi"
#include "juno-cs-r1r2.dtsi"
@@ -319,3 +320,27 @@
&cpu_debug5 {
cpu = <&A53_3>;
};
+
+&cti0 {
+ cpu = <&A72_0>;
+};
+
+&cti1 {
+ cpu = <&A72_1>;
+};
+
+&cti2 {
+ cpu = <&A53_0>;
+};
+
+&cti3 {
+ cpu = <&A53_1>;
+};
+
+&cti4 {
+ cpu = <&A53_2>;
+};
+
+&cti5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
index d72dcff9bf06..4135d62e44a2 100644
--- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -154,6 +154,31 @@
power-domains = <&scmi_devpd 8>;
};
+&cti0 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti1 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti2 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti3 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti4 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti5 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti_sys0 {
+ power-domains = <&scmi_devpd 8>;
+};
+&cti_sys1 {
+ power-domains = <&scmi_devpd 8>;
+};
+
&gpu {
clocks = <&scmi_dvfs 2>;
power-domains = <&scmi_devpd 9>;
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index f00cffbd032c..dbc22e70b62c 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/arm/coresight-cti-dt.h>
#include "juno-base.dtsi"
/ {
@@ -295,3 +296,27 @@
&cpu_debug5 {
cpu = <&A53_3>;
};
+
+&cti0 {
+ cpu = <&A57_0>;
+};
+
+&cti1 {
+ cpu = <&A57_1>;
+};
+
+&cti2 {
+ cpu = <&A53_0>;
+};
+
+&cti3 {
+ cpu = <&A53_1>;
+};
+
+&cti4 {
+ cpu = <&A53_2>;
+};
+
+&cti5 {
+ cpu = <&A53_3>;
+};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
index 33182d9e5826..ec2d5280a30b 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi
@@ -10,17 +10,24 @@
arm,v2m-memory-map = "rs2";
iofpga-bus@300000000 {
- virtio-p9@140000 {
+ virtio@140000 {
compatible = "virtio,mmio";
reg = <0x140000 0x200>;
interrupts = <43>;
};
- virtio-net@150000 {
+ virtio@150000 {
compatible = "virtio,mmio";
reg = <0x150000 0x200>;
interrupts = <44>;
};
+
+ virtio@200000 {
+ compatible = "virtio,mmio";
+ reg = <0x200000 0x200>;
+ interrupts = <46>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
index 5f6cab668aa0..ba8beef3fe99 100644
--- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi
@@ -110,7 +110,7 @@
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 3 0 0x200000>;
+ ranges = <0 3 0 0x210000>;
v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
@@ -222,7 +222,7 @@
clock-names = "timclken1", "timclken2", "apb_pclk";
};
- virtio-block@130000 {
+ virtio@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x200>;
interrupts = <42>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index 12a4b1c03390..e34172e3117e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -203,7 +203,7 @@
&qspi {
bspi-sel = <0>;
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index f00c21e0767e..7bf26f3e36bf 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -146,7 +146,7 @@
};
&qspi {
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index f59fa3979a04..fda97c47f4e9 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -289,8 +289,6 @@
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&iprocslow>;
clock-names = "apb_pclk";
};
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
index 77efa28c4dd5..dfac910a45d6 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
@@ -61,7 +61,7 @@
cs-gpios = <&gpio_hsls 34 0>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
@@ -76,7 +76,7 @@
cs-gpios = <&gpio_hsls 96 0>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 7f1b8efd0883..09d4aa8ae1d6 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -556,8 +556,6 @@
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&hsls_div2_clk>;
clock-names = "apb_pclk";
iommus = <&smmu 0x6000 0x0000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 661567d2dd7a..75b548e495a0 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -806,7 +806,8 @@
};
timer@101c0000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos5433-mct",
+ "samsung,exynos4210-mct";
reg = <0x101c0000 0x800>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
@@ -1865,8 +1866,6 @@
clocks = <&cmu_fsys CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@15600000 {
@@ -1876,8 +1875,6 @@
clocks = <&cmu_fsys CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
audio-subsystem@11400000 {
@@ -1897,8 +1894,6 @@
clocks = <&cmu_aud CLK_ACLK_DMAC>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
power-domains = <&pd_aud>;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index e38bb02a2152..1cd771c90b47 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -149,8 +149,6 @@
clocks = <&clock_fsys0 ACLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
pdma1: dma-controller@10eb0000 {
@@ -160,8 +158,6 @@
clocks = <&clock_fsys0 ACLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
};
clock_topc: clock-controller@10570000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index 7b5a61d22cc5..f52a55f644f7 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -20,6 +20,11 @@
model = "WinLink E850-96 board";
compatible = "winlink,e850-96", "samsung,exynos850";
+ aliases {
+ mmc0 = &mmc_0;
+ serial0 = &serial_0;
+ };
+
chosen {
stdout-path = &serial_0;
};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
index d1700e96fee2..9076afd4bb3e 100644
--- a/arch/arm64/boot/dts/exynos/exynos850.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -29,22 +29,6 @@
pinctrl3 = &pinctrl_hsi;
pinctrl4 = &pinctrl_core;
pinctrl5 = &pinctrl_peri;
- mmc0 = &mmc_0;
- serial0 = &serial_0;
- serial1 = &serial_1;
- serial2 = &serial_2;
- i2c0 = &i2c_0;
- i2c1 = &i2c_1;
- i2c2 = &i2c_2;
- i2c3 = &i2c_3;
- i2c4 = &i2c_4;
- i2c5 = &i2c_5;
- i2c6 = &i2c_6;
- i2c7 = &hsi2c_0;
- i2c8 = &hsi2c_1;
- i2c9 = &hsi2c_2;
- i2c10 = &hsi2c_3;
- i2c11 = &hsi2c_4;
};
arm-pmu {
@@ -181,7 +165,8 @@
};
timer@10040000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "samsung,exynos850-mct",
+ "samsung,exynos4210-mct";
reg = <0x10040000 0x800>;
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
index 57518cb5e8c4..17e568853eb6 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts
@@ -58,3 +58,7 @@
&usi_0 {
status = "okay";
};
+
+&xtcxo {
+ clock-frequency = <26000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 807d500d6022..0ce46ec5cdc3 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -6,6 +6,7 @@
*
*/
+#include <dt-bindings/clock/samsung,exynosautov9.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/soc/samsung,exynos-usi.h>
@@ -153,30 +154,8 @@
xtcxo: clock {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <26000000>;
clock-output-names = "oscclk";
};
-
- /*
- * Keep the stub clock for serial driver, until proper clock
- * driver is implemented.
- */
- uart_clock: uart-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <133250000>;
- clock-output-names = "uart";
- };
-
- /*
- * Keep the stub clock for ufs driver, until proper clock
- * driver is implemented.
- */
- ufs_core_clock: ufs-core-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <166562500>;
- };
};
soc: soc@0 {
@@ -190,6 +169,89 @@
reg = <0x10000000 0x24>;
};
+ cmu_peris: clock-controller@10020000 {
+ compatible = "samsung,exynosautov9-cmu-peris";
+ reg = <0x10020000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_PERIS_BUS>;
+ clock-names = "oscclk",
+ "dout_clkcmu_peris_bus";
+ };
+
+ cmu_peric0: clock-controller@10200000 {
+ compatible = "samsung,exynosautov9-cmu-peric0";
+ reg = <0x10200000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_BUS>,
+ <&cmu_top DOUT_CLKCMU_PERIC0_IP>;
+ clock-names = "oscclk",
+ "dout_clkcmu_peric0_bus",
+ "dout_clkcmu_peric0_ip";
+ };
+
+ cmu_peric1: clock-controller@10800000 {
+ compatible = "samsung,exynosautov9-cmu-peric1";
+ reg = <0x10800000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_PERIC1_BUS>,
+ <&cmu_top DOUT_CLKCMU_PERIC1_IP>;
+ clock-names = "oscclk",
+ "dout_clkcmu_peric1_bus",
+ "dout_clkcmu_peric1_ip";
+ };
+
+ cmu_fsys2: clock-controller@17c00000 {
+ compatible = "samsung,exynosautov9-cmu-fsys2";
+ reg = <0x17c00000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+ <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+ clock-names = "oscclk",
+ "dout_clkcmu_fsys2_bus",
+ "dout_fsys2_clkcmu_ufs_embd",
+ "dout_fsys2_clkcmu_ethernet";
+ };
+
+ cmu_core: clock-controller@1b030000 {
+ compatible = "samsung,exynosautov9-cmu-core";
+ reg = <0x1b030000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_CORE_BUS>;
+ clock-names = "oscclk",
+ "dout_clkcmu_core_bus";
+ };
+
+ cmu_busmc: clock-controller@1b200000 {
+ compatible = "samsung,exynosautov9-cmu-busmc";
+ reg = <0x1b200000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>,
+ <&cmu_top DOUT_CLKCMU_BUSMC_BUS>;
+ clock-names = "oscclk",
+ "dout_clkcmu_busmc_bus";
+ };
+
+ cmu_top: clock-controller@1b240000 {
+ compatible = "samsung,exynosautov9-cmu-top";
+ reg = <0x1b240000 0x8000>;
+ #clock-cells = <1>;
+
+ clocks = <&xtcxo>;
+ clock-names = "oscclk";
+ };
+
gic: interrupt-controller@10101000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -271,7 +333,8 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
- clocks = <&uart_clock>, <&uart_clock>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
clock-names = "pclk", "ipclk";
status = "disabled";
@@ -282,7 +345,8 @@
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_bus_dual>;
- clocks = <&uart_clock>, <&uart_clock>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -308,8 +372,8 @@
<0x17dc0000 0x2200>; /* 3: UFS protector */
reg-names = "hci", "vs_hci", "unipro", "ufsp";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ufs_core_clock>,
- <&ufs_core_clock>;
+ clocks = <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_ACLK>,
+ <&cmu_fsys2 CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO>;
clock-names = "core_clk", "sclk_unipro_main";
freq-table-hz = <0 0>, <0 0>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 7f51b537df40..238a83e5b8c6 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -49,12 +49,14 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-mx8menlo.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
@@ -72,12 +74,19 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-kontron-pitx-imx8m.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index c03f4e183389..4ab17b984b03 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -311,10 +311,19 @@
status = "okay";
};
+&mscc_felix_port4 {
+ dsa-tag-protocol = "ocelot-8021q";
+};
+
+&mscc_felix_port5 {
+ dsa-tag-protocol = "ocelot-8021q";
+};
+
&usb0 {
status = "okay";
};
&usb1 {
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 19d3952dbffe..5baf060acf93 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -382,9 +382,11 @@
};
&usb0 {
+ dr_mode = "host";
status = "okay";
};
&usb1 {
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 68c31cb8eead..e0cd1516d05b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -299,10 +299,10 @@
};
&usb0 {
+ dr_mode = "host";
status = "okay";
};
&usb1 {
- dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 088271d49139..92465f777603 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -599,7 +599,6 @@
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
@@ -610,7 +609,6 @@
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
snps,dis_rxdet_inp3_quirk;
snps,quirk-frame-length-adjustment = <0x20>;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 35d1939e690b..21200cbf7161 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -335,7 +335,7 @@
<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0xf 0x0>;
};
};
@@ -389,8 +389,8 @@
big-endian;
};
- ifc: ifc@1530000 {
- compatible = "fsl,ifc", "simple-bus";
+ ifc: memory-controller@1530000 {
+ compatible = "fsl,ifc";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <0 43 0x4>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 4e7bd04d9798..0085e83adf65 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -280,8 +280,8 @@
big-endian;
};
- ifc: ifc@1530000 {
- compatible = "fsl,ifc", "simple-bus";
+ ifc: memory-controller@1530000 {
+ compatible = "fsl,ifc";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -341,7 +341,7 @@
<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0xf 0x0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 18e529118476..f476b7d8b056 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -265,7 +265,7 @@
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0xf 0x0>;
};
};
@@ -396,8 +396,8 @@
#interrupt-cells = <2>;
};
- ifc: ifc@2240000 {
- compatible = "fsl,ifc", "simple-bus";
+ ifc: memory-controller@2240000 {
+ compatible = "fsl,ifc";
reg = <0x0 0x2240000 0x0 0x20000>;
interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
little-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
index 10d2fe091965..6fab73d484b6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
@@ -104,21 +104,21 @@
&dspi {
status = "okay";
- dflash0: n25q128a@0 {
+ dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <0>;
};
- dflash1: sst25wf040b@1 {
+ dflash1: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
spi-max-frequency = <3000000>;
reg = <1>;
};
- dflash2: en25s64@2 {
+ dflash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
@@ -129,7 +129,7 @@
&qspi {
status = "okay";
- flash0: s25fl256s1@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
@@ -138,7 +138,7 @@
spi-tx-bus-width = <4>;
reg = <0>;
};
- flash2: s25fl256s1@2 {
+ flash2: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 4b71c4fcb35f..f8135c5c252d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -100,7 +100,7 @@
&dspi {
status = "okay";
- dflash0: n25q512a@0 {
+ dflash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 1282b61da8a5..4ba1e0499dfd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -305,7 +305,7 @@
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0xf 0x0>;
};
};
@@ -1036,8 +1036,8 @@
QORIQ_CLK_PLL_DIV(4)>;
};
- ifc: ifc@2240000 {
- compatible = "fsl,ifc", "simple-bus";
+ ifc: memory-controller@2240000 {
+ compatible = "fsl,ifc";
reg = <0x0 0x2240000 0x0 0x20000>;
interrupts = <0 21 0x4>; /* Level high type */
little-endian;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index c5daa15b020d..47ea854720ce 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -698,7 +698,7 @@
<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-map-mask = <0xffffffff 0x0>;
+ interrupt-map-mask = <0xf 0x0>;
};
};
@@ -909,7 +909,7 @@
QORIQ_CLK_PLL_DIV(8)>,
<&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg", "per";
- fsl,clk-source = <0>;
+ fsl,clk-source = /bits/ 8 <0>;
status = "disabled";
};
@@ -921,7 +921,7 @@
QORIQ_CLK_PLL_DIV(8)>,
<&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg", "per";
- fsl,clk-source = <0>;
+ fsl,clk-source = /bits/ 8 <0>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
new file mode 100644
index 000000000000..c6540768bdb9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ * Dong Aisheng <aisheng.dong@nxp.com>
+ */
+
+vpu: vpu@2c000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x2c000000 0x0 0x2c000000 0x2000000>;
+ reg = <0 0x2c000000 0 0x1000000>;
+ power-domains = <&pd IMX_SC_R_VPU>;
+ status = "disabled";
+
+ mu_m0: mailbox@2d000000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d000000 0x20000>;
+ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+ status = "disabled";
+ };
+
+ mu1_m0: mailbox@2d020000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d020000 0x20000>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+ status = "disabled";
+ };
+
+ mu2_m0: mailbox@2d040000 {
+ compatible = "fsl,imx6sx-mu";
+ reg = <0x2d040000 0x20000>;
+ interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+ status = "disabled";
+ };
+
+ vpu_core0: vpu-core@2d080000 {
+ reg = <0x2d080000 0x10000>;
+ compatible = "nxp,imx8q-vpu-decoder";
+ power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu_m0 0 0>,
+ <&mu_m0 0 1>,
+ <&mu_m0 1 0>;
+ status = "disabled";
+ };
+
+ vpu_core1: vpu-core@2d090000 {
+ reg = <0x2d090000 0x10000>;
+ compatible = "nxp,imx8q-vpu-encoder";
+ power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu1_m0 0 0>,
+ <&mu1_m0 0 1>,
+ <&mu1_m0 1 0>;
+ status = "disabled";
+ };
+
+ vpu_core2: vpu-core@2d0a0000 {
+ reg = <0x2d0a0000 0x10000>;
+ compatible = "nxp,imx8q-vpu-encoder";
+ power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+ mbox-names = "tx0", "tx1", "rx";
+ mboxes = <&mu2_m0 0 0>,
+ <&mu2_m0 0 1>,
+ <&mu2_m0 1 0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index ec3f2c177035..f338a886d811 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -278,6 +278,7 @@
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MM_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ uart-has-rtscts;
status = "okay";
};
@@ -386,6 +387,8 @@
fsl,pins = <
MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
+ MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40
+ MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
new file mode 100644
index 000000000000..778bdbe228d3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/qca-ar803x.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mm.dtsi"
+
+/ {
+ model = "Data Modul i.MX8M Mini eDM SBC";
+ compatible = "dmo,imx8mm-data-modul-edm-sbc", "fsl,imx8mm";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* There are 1/2/4 GiB options, adjusted by bootloader. */
+ reg = <0x0 0x40000000 0 0x40000000>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_backlight>;
+ brightness-levels = <0 1 10 20 30 40 50 60 70 75 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm1 0 5000000 0>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ clk_xtal25: clk-xtal25 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ panel: panel {
+ backlight = <&backlight>;
+ power-supply = <&reg_panel_vcc>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ reg_panel_vcc: regulator-panel-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_vcc_reg>;
+ regulator-name = "PANEL_VCC";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 6 0>;
+ enable-active-high;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+ };
+
+ reg_usdhc2_vcc: regulator-usdhc2-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_vcc_reg>;
+ regulator-name = "V_3V3_SD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 0>;
+ enable-active-high;
+ };
+
+ watchdog-gpio {
+ /* TPS3813 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_watchdog_gpio>;
+ compatible = "linux,wdt-gpio";
+ always-enabled;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ hw_algo = "level";
+ /* Reset triggers in 2..3 seconds */
+ hw_margin_ms = <1500>;
+ /* Disabled by default */
+ status = "disabled";
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&ddrc {
+ operating-points-v2 = <&ddrc_opp_table>;
+
+ ddrc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-25M {
+ opp-hz = /bits/ 64 <25000000>;
+ };
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ flash@0 { /* W25Q128FVSI */
+ compatible = "jedec,spi-nor";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&ecspi2 { /* Feature connector SPI */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ /* Disabled by default, unless feature board plugged in. */
+ status = "disabled";
+};
+
+&ecspi3 { /* Display connector SPI */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&fec1_phy>;
+ phy-supply = <&buck4_reg>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Atheros AR8031 PHY */
+ fec1_phy: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ /*
+ * Dedicated ENET_WOL# signal is unused, the PHY
+ * can wake the SoC up via INT signal as well.
+ */
+ interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ qca,clk-out-frequency = <125000000>;
+ qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
+ qca,keep-pll-enabled;
+ vddio-supply = <&vddio>;
+
+ vddio: vddio-regulator {
+ regulator-name = "VDDIO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddh: vddh-regulator {
+ regulator-name = "VDDH";
+ };
+ };
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "ENET_RST#", "WDOG_B#", "PMIC_INT#",
+ "", "M2-B_PCIE_RST#", "M2-B_PCIE_WAKE#", "RTC_IRQ#",
+ "WDOG_KICK#", "M2-B_PCIE_CLKREQ#",
+ "USB1_OTG_ID_3V3", "ENET_WOL#",
+ "", "", "", "ENET_INT#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "MEMCFG2", "MEMCFG1", "DSI_RESET_1V8#", "DSI_IRQ_1V8#",
+ "M2-B_FULL_CARD_PWROFF_1V8#", "EEPROM_WP_1V8#",
+ "PCIE_CLK_GEN_CLKPWRGD_PD_1V8#", "GRAPHICS_PRSNT_1V8#",
+ "MEMCFG0", "WDOG_EN",
+ "M2-B_W_DISABLE1_WWAN_1V8#", "M2-B_W_DISABLE2_GPS_1V8#",
+ "", "", "", "",
+ "", "", "", "SD2_RESET#", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "BL_ENABLE_1V8", "PG_V_IN_VAR#", "", "",
+ "", "", "TFT_ENABLE_1V8", "GRAPHICS_GPIO0_1V8",
+ "CSI_PD_1V8", "CSI_RESET_1V8#", "", "",
+ "", "", "", "",
+ "", "", "", "M2-B_WAKE_WWAN_1V8#",
+ "M2-B_RESET_1V8#", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "NC0", "NC1", "BOOTCFG0", "BOOTCFG1",
+ "BOOTCFG2", "BOOTCFG3", "BOOTCFG4", "BOOTCFG5",
+ "BOOTCFG6", "BOOTCFG7", "NC10", "NC11",
+ "BOOTCFG8", "BOOTCFG9", "BOOTCFG10", "BOOTCFG11",
+ "BOOTCFG12", "BOOTCFG13", "BOOTCFG14", "BOOTCFG15",
+ "NC20", "", "", "",
+ "", "CAN_INT#", "CAN_RST#", "GPIO4_IO27",
+ "DIS_USB_DN2", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "DIS_USB_DN1", "USBHUB_RESET#", "GPIO5_IO03",
+ "GPIO5_IO04", "", "", "",
+ "", "SPI1_CS#", "", "",
+ "", "SPI2_CS#", "I2C1_SCL_3V3", "I2C1_SDA_3V3",
+ "I2C2_SCL_3V3", "I2C2_SDA_3V3", "I2C3_SCL_3V3", "I2C3_SDA_3V3",
+ "I2C4_SCL_3V3", "I2C4_SDA_3V3", "", "",
+ "", "SPI3_CS#", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pmic: pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ rohm,reset-snvs-powered;
+
+ /*
+ * i.MX 8M Mini Data Sheet for Consumer Products
+ * 3.1.3 Operating ranges
+ * MIMX8MM4DVTLZAA
+ */
+ regulators {
+ /* VDD_SOC */
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ /* VDD_ARM */
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <950000>;
+ };
+
+ /* VDD_DRAM, BUCK5 */
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ /* 1.5 GHz DDR bus clock */
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 3V3_VDD, BUCK6 */
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_VDD, BUCK7 */
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V1_NVCC_DRAM, BUCK8 */
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_NVCC_SNVS */
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 0V8_VDD_SNVS */
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V8_VDDA */
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 0V9_VDD_PHY */
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* 1V2_VDD_PHY */
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ usb-hub@2c {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_hub>;
+ compatible = "microchip,usb2514bi";
+ reg = <0x2c>;
+ individual-port-switching;
+ reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ self-powered;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+
+ rtc: rtc@68 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ compatible = "st,m41t62";
+ reg = <0x68>;
+ interrupts-extended = <&gpio1 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pcieclk: clk@6a {
+ compatible = "renesas,9fgv0241";
+ reg = <0x6a>;
+ clocks = <&clk_xtal25>;
+ #clock-cells = <1>;
+ };
+};
+
+&i2c3 { /* Display connector I2C */
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <320000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 { /* Feature connector I2C */
+ /* IMX8MM ERRATA e7805 -- I2C is limited to 384 kHz due to SoC bug */
+ clock-frequency = <320000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_feature>, <&pinctrl_hog_misc>,
+ <&pinctrl_hog_panel>, <&pinctrl_hog_sbc>,
+ <&pinctrl_panel_expansion>;
+
+ pinctrl_ecspi1: ecspi1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x44
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x44
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x44
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x40
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x44
+ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x44
+ MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x44
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x40
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x44
+ MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x44
+ MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x44
+ MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x40
+ >;
+ };
+
+ pinctrl_fec1: fec1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ /* ENET_RST# */
+ MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x6
+ /* ENET_WOL# */
+ MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000090
+ /* ENET_INT# */
+ MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000090
+ >;
+ };
+
+ pinctrl_hog_feature: hog-feature-grp {
+ fsl,pins = <
+ /* GPIO4_IO27 */
+ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x40000006
+ /* GPIO5_IO03 */
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000006
+ /* GPIO5_IO04 */
+ MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000006
+
+ /* CAN_INT# */
+ MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x40000090
+ /* CAN_RST# */
+ MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x26
+ >;
+ };
+
+ pinctrl_hog_panel: hog-panel-grp {
+ fsl,pins = <
+ /* GRAPHICS_GPIO0_1V8 */
+ MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x26
+ >;
+ };
+
+ pinctrl_hog_misc: hog-misc-grp {
+ fsl,pins = <
+ /* PG_V_IN_VAR# */
+ MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000000
+ /* CSI_PD_1V8 */
+ MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x0
+ /* CSI_RESET_1V8# */
+ MX8MM_IOMUXC_NAND_DATA03_GPIO3_IO9 0x0
+
+ /* DIS_USB_DN1 */
+ MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x0
+ /* DIS_USB_DN2 */
+ MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x0
+
+ /* EEPROM_WP_1V8# */
+ MX8MM_IOMUXC_SD1_DATA3_GPIO2_IO5 0x100
+ /* PCIE_CLK_GEN_CLKPWRGD_PD_1V8# */
+ MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0
+ /* GRAPHICS_PRSNT_1V8# */
+ MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x40000000
+
+ /* CLK_CCM_CLKO1_3V3 */
+ MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x10
+ >;
+ };
+
+ pinctrl_hog_sbc: hog-sbc-grp {
+ fsl,pins = <
+ /* MEMCFG[0..2] straps */
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x40000140
+ MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1 0x40000140
+ MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x40000140
+
+ /* BOOT_CFG[0..15] straps */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x40000000
+ MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000000
+ MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x40000000
+
+ /* Not connected pins */
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x0
+ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x0
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x0
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x0
+ MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000084
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x84
+ MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x84
+ >;
+ };
+
+ pinctrl_i2c2: i2c2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000084
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x84
+ MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x84
+ >;
+ };
+
+ pinctrl_i2c3: i2c3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000084
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x84
+ MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x84
+ >;
+ };
+
+ pinctrl_i2c4: i2c4-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000084
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpio-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x84
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x84
+ >;
+ };
+
+ pinctrl_panel_backlight: panel-backlight-grp {
+ fsl,pins = <
+ /* BL_ENABLE_1V8 */
+ MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x104
+ >;
+ };
+
+ pinctrl_panel_expansion: panel-expansion-grp {
+ fsl,pins = <
+ /* DSI_RESET_1V8# */
+ MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2 0x2
+ /* DSI_IRQ_1V8# */
+ MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3 0x40000090
+ >;
+ };
+
+ pinctrl_panel_vcc_reg: panel-vcc-grp {
+ fsl,pins = <
+ /* TFT_ENABLE_1V8 */
+ MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x104
+ >;
+ };
+
+ pinctrl_panel_pwm: panel-pwm-grp {
+ fsl,pins = <
+ /* BL_PWM_3V3 */
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x12
+ >;
+ };
+
+ pinctrl_pcie0: pcie-grp {
+ fsl,pins = <
+ /* M2-B_RESET_1V8# */
+ MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x102
+ /* M2-B_PCIE_RST# */
+ MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x2
+ /* M2-B_FULL_CARD_PWROFF_1V8# */
+ MX8MM_IOMUXC_SD1_DATA2_GPIO2_IO4 0x102
+ /* M2-B_W_DISABLE1_WWAN_1V8# */
+ MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x102
+ /* M2-B_W_DISABLE2_GPS_1V8# */
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x102
+ /* CLK_M2_32K768 */
+ MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x14
+ /* M2-B_WAKE_WWAN_1V8# */
+ MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x40000140
+ /* M2-B_PCIE_WAKE# */
+ MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000140
+ /* M2-B_PCIE_CLKREQ# */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000140
+ >;
+ };
+
+ pinctrl_pmic: pmic-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x40000090
+ >;
+ };
+
+ pinctrl_rtc: rtc-grp {
+ fsl,pins = <
+ /* RTC_IRQ# */
+ MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000090
+ >;
+ };
+
+ pinctrl_sai5: sai5-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x100
+ MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x0
+ MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x100
+ MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x100
+ MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x100
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x90
+ MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x90
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x50
+ MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x50
+ >;
+ };
+
+ pinctrl_uart2: uart2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x50
+ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x90
+ MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x50
+ MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x90
+ >;
+ };
+
+ pinctrl_uart3: uart3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_uart4: uart4-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x40
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x40
+ >;
+ };
+
+ pinctrl_usb_hub: usb-hub-grp {
+ fsl,pins = <
+ /* USBHUB_RESET# */
+ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x4
+ >;
+ };
+
+ pinctrl_usb_otg1: usb-otg1-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000000
+ MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x4
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x40000090
+ >;
+ };
+
+ pinctrl_usdhc2_vcc_reg: usdhc2-vcc-reg-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MM_IOMUXC_SD2_WP_USDHC2_WP 0x400000d6
+ MX8MM_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0d6
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
+ MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B 0x40
+ >;
+ };
+
+ pinctrl_watchdog_gpio: watchdog-gpio-grp {
+ fsl,pins = <
+ /* WDOG_B# */
+ MX8MM_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x26
+ /* WDOG_EN -- ungate WDT RESET# signal propagation */
+ MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x6
+ /* WDOG_KICK# / WDI */
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x26
+ >;
+ };
+};
+
+&pcie_phy {
+ fsl,clkreq-unsupported; /* CLKREQ_B is not connected to suitable input */
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,tx-deemph-gen1 = <0x2d>;
+ fsl,tx-deemph-gen2 = <0xf>;
+ clocks = <&pcieclk 0>;
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&pcieclk 0>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-rates = <10000000>, <250000000>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_pwm>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ fsl,sai-mclk-direction-output;
+ /* Input into codec PLL */
+ assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>;
+ assigned-clock-rates = <22579200>;
+ /* Disabled by default, unless display board plugged in. */
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "disabled";
+};
+
+&uart3 { /* A53 Debug */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* M4 Debug */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ /* UART4 is reserved for CM and RDC blocks CA access to UART4. */
+ status = "disabled";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbotg2 {
+ disable-over-current;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 { /* MicroSD */
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2_ROOT>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_usdhc2_vcc>;
+ status = "okay";
+};
+
+&usdhc3 { /* eMMC */
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <&buck4_reg>;
+ vqmmc-supply = <&buck5_reg>;
+ status = "okay";
+};
+
+&wdog1 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
index 7c4af71baab9..0dbdc9ec3fe5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -98,7 +98,7 @@
pinctrl-1 = <&pinctrl_flexspi1>;
status = "okay";
- flash0: spi-flash@0 {
+ flash0: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 6d67df7692f1..c42b966f7a64 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -59,6 +59,14 @@
enable-active-high;
};
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000 0>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <250>;
+ };
+
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
@@ -395,6 +403,12 @@
status = "okay";
};
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
@@ -549,4 +563,10 @@
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
>;
};
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06
+ >;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index d40caf14ac4a..23be1ec538ba 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -182,7 +182,7 @@
#address-cells = <1>;
#size-cells = <0>;
- usbnet: usbether@1 {
+ usbnet: ethernet@1 {
compatible = "usb424,ec00";
reg = <1>;
local-mac-address = [ 00 00 00 00 00 00 ];
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
index 22a5ef771d4e..8f90eb02550d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi
@@ -66,7 +66,7 @@
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25r1635f", "jedec,spi-nor";
spi-max-frequency = <80000000>;
reg = <0>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
new file mode 100644
index 000000000000..92eaf4ef4563
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -0,0 +1,334 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2021-2022 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+
+/ {
+ model = "MENLO MX8MM EMBEDDED DEVICE";
+ compatible = "menlo,mx8menlo",
+ "toradex,verdin-imx8mm",
+ "fsl,imx8mm";
+
+ /delete-node/ gpio-keys;
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_led>;
+
+ user1 {
+ label = "TestLed601";
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user2 {
+ label = "TestLed602";
+ gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_beeper>;
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* Fixed clock dedicated to SPI CAN on carrier board */
+ clk_xtal20: clk-xtal20 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ };
+};
+
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ /* CAN controller on the baseboard */
+ canfd: can@0 {
+ compatible = "microchip,mcp2518fd";
+ clocks = <&clk_xtal20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0>;
+ spi-max-frequency = <2000000>;
+ };
+
+};
+
+&ecspi2 {
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_gpio1>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ spidev@0 {
+ compatible = "menlo,m53cpld";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+ };
+
+ spidev@1 {
+ compatible = "menlo,m53cpld";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+ };
+
+};
+
+&ethphy0 {
+ max-speed = <100>;
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&flexspi {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <66000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
+ };
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "DISP_reset", "KBD_intI",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio4 {
+ /*
+ * CPLD_D[n] is ARM_CPLD[n] in schematic
+ * CPLD_int is SA_INTERRUPT in schematic
+ * CPLD_reset is RESET_SOFT in schematic
+ */
+ gpio-line-names =
+ "CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
+ "", "CPLD_D[0]", "", "",
+ "", "", "", "CPLD_D[2]",
+ "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
+ "CPLD_D[7]", "", "", "",
+ "", "", "", "",
+ "", "", "", "KBD_intK",
+ "", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio_expander_21 {
+ status = "okay";
+};
+
+&hwmon {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ /* None of this is present on the SoM. */
+ /delete-node/ bridge@2c;
+ /delete-node/ hdmi@48;
+ /delete-node/ touch@4a;
+ /delete-node/ sensor@4f;
+ /delete-node/ eeprom@50;
+ /delete-node/ eeprom@57;
+};
+
+&iomuxc {
+ pinctrl-0 = <&pinctrl_gpio7>, <&pinctrl_gpio_hog1>,
+ <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>;
+
+ pinctrl_beeper: beepergrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1c4
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x4
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x4
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1c4
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x1c4
+ >;
+ };
+
+ pinctrl_led: ledgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4
+ MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4
+ >;
+ };
+
+ pinctrl_uart4_rts: uart4rtsgrp {
+ fsl,pins = <
+ /* SODIMM 222 */
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184
+ >;
+ };
+};
+
+&pinctrl_gpio1 {
+ fsl,pins = <
+ /* SODIMM 206 */
+ MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x1c4
+ >;
+};
+
+&pinctrl_gpio_hog1 {
+ fsl,pins = <
+ /* SODIMM 88 */
+ MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4
+ /* CPLD_int */
+ MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4
+ /* CPLD_reset */
+ MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4
+ /* SODIMM 94 */
+ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4
+ /* SODIMM 96 */
+ MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4
+ /* CPLD_D[7] */
+ MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4
+ /* CPLD_D[6] */
+ MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4
+ /* CPLD_D[5] */
+ MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4
+ /* CPLD_D[4] */
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4
+ /* CPLD_D[3] */
+ MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4
+ /* CPLD_D[2] */
+ MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4
+ /* CPLD_D[1] */
+ MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4
+ /* CPLD_D[0] */
+ MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4
+ /* KBD_intK */
+ MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1c4
+ /* DISP_reset */
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x1c4
+ /* KBD_intI */
+ MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x1c4
+ /* SODIMM 46 */
+ MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x1c4
+ >;
+};
+
+&pinctrl_uart1 {
+ fsl,pins = <
+ /* SODIMM 149 */
+ MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4
+ /* SODIMM 147 */
+ MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4
+ /* SODIMM 210 */
+ MX8MM_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x1c4
+ /* SODIMM 212 */
+ MX8MM_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x1c4
+ >;
+};
+
+&reg_usb_otg1_vbus {
+ /delete-property/ enable-active-high;
+ gpio = <&gpio1 12 GPIO_ACTIVE_LOW>;
+};
+
+&reg_usb_otg2_vbus {
+ /delete-property/ enable-active-high;
+ gpio = <&gpio1 14 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+ status = "disabled";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-0 = <&pinctrl_uart4 &pinctrl_uart4_rts>;
+ linux,rs485-enabled-at-boot-time;
+ rts-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index cce55c3c5df0..c557dbf4dcd6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -112,6 +112,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index f61e4847fa49..41d0de6a7027 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -134,6 +134,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 023619648966..244ef8d6cc68 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -154,6 +154,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
@@ -221,6 +222,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
bluetooth {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 7e7231046215..24737e89038a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -678,6 +678,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
@@ -716,6 +717,7 @@
dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -731,6 +733,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -739,6 +742,7 @@
pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -1087,15 +1091,3 @@
>;
};
};
-
-&cpu_alert0 {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "passive";
-};
-
-&cpu_crit0 {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "critical";
-};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index edf0c7aaaef0..407ab4592b4c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -394,6 +394,13 @@
gw,voltage-divider-ohms = <10000 10000>;
};
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
@@ -595,7 +602,8 @@
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
- clocks = <&clk IMX8MM_CLK_DUMMY>;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
@@ -604,8 +612,8 @@
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
- <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
- clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
<&clk IMX8MM_CLK_PCIE1_CTRL>;
assigned-clock-rates = <10000000>, <250000000>;
@@ -644,6 +652,7 @@
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
@@ -660,6 +669,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
bluetooth {
@@ -677,6 +687,7 @@
dtr-gpios = <&gpio4 3 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
index 1deb2ea8fcc9..a7dae9bd4c11 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -540,6 +540,7 @@
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
+ clock-names = "ref";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
index aca5ae0d307d..c2a5c2f7b204 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -114,7 +114,7 @@
status = "okay";
};
-/* VERDIN I2S_1 */
+/* Verdin I2S_1 */
&sai2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
index 3e06a6ce3406..017db9eab256 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
@@ -17,19 +17,6 @@
};
};
-/* On-module Wi-Fi */
-&usdhc3 {
- bus-width = <4>;
- keep-power-in-suspend;
- non-removable;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
- vmmc-supply = <&reg_wifi_en>;
- status = "okay";
-};
-
&gpio3 {
gpio-line-names = "SODIMM_52",
"SODIMM_54",
@@ -92,3 +79,16 @@
"SODIMM_135",
"SODIMM_129";
};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+ bus-width = <4>;
+ keep-power-in-suspend;
+ non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
+ vmmc-supply = <&reg_wifi_en>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index 0d84d29e70f1..eafa88d980b3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -86,7 +86,7 @@
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
- regulator-name = "+V3.3_ETH";
+ regulator-name = "On-module +V3.3_ETH";
startup-delay-us = <200000>;
};
@@ -99,7 +99,7 @@
pinctrl-0 = <&pinctrl_reg_usb1_en>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
- regulator-name = "usb_otg1_vbus";
+ regulator-name = "USB_1_EN";
};
reg_usb_otg2_vbus: regulator-usb-otg2 {
@@ -111,7 +111,7 @@
pinctrl-0 = <&pinctrl_reg_usb2_en>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <5000000>;
- regulator-name = "usb_otg2_vbus";
+ regulator-name = "USB_2_EN";
};
reg_usdhc2_vmmc: regulator-usdhc2 {
@@ -306,7 +306,7 @@
"SODIMM_151",
"SODIMM_153";
- ctrl_sleep_moci-hog {
+ ctrl-sleep-moci-hog {
gpio-hog;
/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
gpios = <1 GPIO_ACTIVE_HIGH>;
@@ -337,6 +337,11 @@
reg = <0x25>;
sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ /*
+ * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
+ * behind this PMIC.
+ */
+
regulators {
reg_vdd_soc: BUCK1 {
nxp,dvs-run-voltage = <850000>;
@@ -345,7 +350,7 @@
regulator-boot-on;
regulator-max-microvolt = <850000>;
regulator-min-microvolt = <800000>;
- regulator-name = "+VDD_SOC";
+ regulator-name = "On-module +VDD_SOC (BUCK1)";
regulator-ramp-delay = <3125>;
};
@@ -356,7 +361,7 @@
regulator-boot-on;
regulator-max-microvolt = <950000>;
regulator-min-microvolt = <850000>;
- regulator-name = "+VDD_ARM";
+ regulator-name = "On-module +VDD_ARM (BUCK2)";
regulator-ramp-delay = <3125>;
};
@@ -365,7 +370,7 @@
regulator-boot-on;
regulator-max-microvolt = <950000>;
regulator-min-microvolt = <850000>;
- regulator-name = "+VDD_GPU_VPU_DDR";
+ regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
};
reg_vdd_3v3: BUCK4 {
@@ -373,7 +378,7 @@
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
- regulator-name = "+V3.3";
+ regulator-name = "On-module +V3.3 (BUCK4)";
};
reg_vdd_1v8: BUCK5 {
@@ -381,7 +386,7 @@
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
- regulator-name = "PWR_1V8_MOCI";
+ regulator-name = "PWR_1V8_MOCI (BUCK5)";
};
reg_nvcc_dram: BUCK6 {
@@ -389,7 +394,7 @@
regulator-boot-on;
regulator-max-microvolt = <1100000>;
regulator-min-microvolt = <1100000>;
- regulator-name = "+VDD_DDR";
+ regulator-name = "On-module +VDD_DDR (BUCK6)";
};
reg_nvcc_snvs: LDO1 {
@@ -397,7 +402,7 @@
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
- regulator-name = "+V1.8_SNVS";
+ regulator-name = "On-module +V1.8_SNVS (LDO1)";
};
reg_vdd_snvs: LDO2 {
@@ -405,7 +410,7 @@
regulator-boot-on;
regulator-max-microvolt = <900000>;
regulator-min-microvolt = <800000>;
- regulator-name = "+V0.8_SNVS";
+ regulator-name = "On-module +V0.8_SNVS (LDO2)";
};
reg_vdda: LDO3 {
@@ -413,7 +418,7 @@
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
- regulator-name = "+V1.8A";
+ regulator-name = "On-module +V1.8A (LDO3)";
};
reg_vdd_phy: LDO4 {
@@ -421,13 +426,13 @@
regulator-boot-on;
regulator-max-microvolt = <900000>;
regulator-min-microvolt = <900000>;
- regulator-name = "+V0.9_MIPI";
+ regulator-name = "On-module +V0.9_MIPI (LDO4)";
};
reg_nvcc_sd: LDO5 {
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
- regulator-name = "+V3.3_1.8_SD";
+ regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
};
};
};
@@ -580,8 +585,10 @@
atmel_mxt_ts: touch@4a {
compatible = "atmel,maxtouch";
- /* Verdin GPIO_9_DSI */
- /* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */
+ /*
+ * Verdin GPIO_9_DSI
+ * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+ */
interrupt-parent = <&gpio3>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
@@ -661,7 +668,7 @@
#pwm-cells = <3>;
};
-/* VERDIN I2S_1 */
+/* Verdin I2S_1 */
&sai2 {
#sound-dai-cells = <0>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
@@ -695,8 +702,8 @@
uart-has-rtscts;
};
-/* Verdin UART_4 */
/*
+ * Verdin UART_4
* Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS
*/
&uart4 {
@@ -750,10 +757,11 @@
bus-width = <4>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
disable-wp;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
vmmc-supply = <&reg_usdhc2_vmmc>;
};
@@ -774,235 +782,235 @@
pinctrl_can1_int: can1intgrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x1c4>; /* CAN_1_SPI_INT#_1.8V */
+ <MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x146>; /* CAN_1_SPI_INT#_1.8V */
};
pinctrl_can2_int: can2intgrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x1c4>; /* CAN_2_SPI_INT#_1.8V */
+ <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x106>; /* CAN_2_SPI_INT#_1.8V, unused */
};
pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1c4>; /* SODIMM 256 */
+ <MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x106>; /* SODIMM 256 */
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins =
- <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x4>, /* SODIMM 196 */
- <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x4>, /* SODIMM 200 */
- <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x1c4>, /* SODIMM 198 */
- <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x1c4>; /* SODIMM 202 */
+ <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x6>, /* SODIMM 198 */
+ <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x6>, /* SODIMM 200 */
+ <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x6>, /* SODIMM 196 */
+ <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x6>; /* SODIMM 202 */
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins =
- <MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x4>, /* CAN_SPI_SCK_1.8V */
- <MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x4>, /* CAN_SPI_MOSI_1.8V */
- <MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x1c4>, /* CAN_SPI_MISO_1.8V */
- <MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x1c4>, /* CAN_1_SPI_CS_1.8V# */
- <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x1c4>; /* CAN_2_SPI_CS#_1.8V */
+ <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x146>, /* CAN_2_SPI_CS#_1.8V */
+ <MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x6>, /* CAN_SPI_SCK_1.8V */
+ <MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x6>, /* CAN_SPI_MOSI_1.8V */
+ <MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x6>, /* CAN_SPI_MISO_1.8V */
+ <MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x6>; /* CAN_1_SPI_CS_1.8V# */
};
pinctrl_fec1: fec1grp {
fsl,pins =
<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>,
<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>,
- <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>,
- <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>,
- <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>,
- <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>,
- <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
- <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
- <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>,
- <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>,
+ <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
+ <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
+ <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>,
<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>,
+ <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>,
+ <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>,
<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>,
- <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c4>;
+ <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x146>;
};
pinctrl_fec1_sleep: fec1-sleepgrp {
fsl,pins =
<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3>,
<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3>,
- <MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f>,
- <MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f>,
- <MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f>,
- <MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f>,
- <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
- <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
- <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>,
- <MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f>,
+ <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
+ <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
+ <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>,
<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>,
+ <MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f>,
+ <MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f>,
+ <MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f>,
<MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x1f>,
- <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184>;
+ <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x106>;
};
pinctrl_flexspi0: flexspi0grp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2>, /* SODIMM 52 */
- <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>, /* SODIMM 54 */
- <MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x82>, /* SODIMM 64 */
- <MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82>, /* SODIMM 66 */
- <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>, /* SODIMM 56 */
- <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>, /* SODIMM 58 */
- <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>, /* SODIMM 60 */
- <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>; /* SODIMM 62 */
+ <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x106>, /* SODIMM 52 */
+ <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x106>, /* SODIMM 54 */
+ <MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x106>, /* SODIMM 64 */
+ <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x106>, /* SODIMM 56 */
+ <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x106>, /* SODIMM 58 */
+ <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x106>, /* SODIMM 60 */
+ <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x106>, /* SODIMM 62 */
+ <MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x106>; /* SODIMM 66 */
};
pinctrl_gpio1: gpio1grp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x184>; /* SODIMM 206 */
+ <MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x106>; /* SODIMM 206 */
};
pinctrl_gpio2: gpio2grp {
fsl,pins =
- <MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1c4>; /* SODIMM 208 */
+ <MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x106>; /* SODIMM 208 */
};
pinctrl_gpio3: gpio3grp {
fsl,pins =
- <MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x184>; /* SODIMM 210 */
+ <MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x106>; /* SODIMM 210 */
};
pinctrl_gpio4: gpio4grp {
fsl,pins =
- <MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x184>; /* SODIMM 212 */
+ <MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x106>; /* SODIMM 212 */
};
pinctrl_gpio5: gpio5grp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x184>; /* SODIMM 216 */
+ <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x106>; /* SODIMM 216 */
};
pinctrl_gpio6: gpio6grp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184>; /* SODIMM 218 */
+ <MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x106>; /* SODIMM 218 */
};
pinctrl_gpio7: gpio7grp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x184>; /* SODIMM 220 */
+ <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x106>; /* SODIMM 220 */
};
pinctrl_gpio8: gpio8grp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184>; /* SODIMM 222 */
+ <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x106>; /* SODIMM 222 */
};
/* Verdin GPIO_9_DSI (pulled-up as active-low) */
pinctrl_gpio_9_dsi: gpio9dsigrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x1c4>; /* SODIMM 17 */
+ <MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x146>; /* SODIMM 17 */
};
- /* Verdin GPIO_10_DSI */
+ /* Verdin GPIO_10_DSI (pulled-up as active-low) */
pinctrl_gpio_10_dsi: gpio10dsigrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x1c4>; /* SODIMM 21 */
+ <MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x146>; /* SODIMM 21 */
};
pinctrl_gpio_hog1: gpiohog1grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4>, /* SODIMM 88 */
- <MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4>, /* SODIMM 90 */
- <MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4>, /* SODIMM 92 */
- <MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4>, /* SODIMM 94 */
- <MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4>, /* SODIMM 96 */
- <MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4>, /* SODIMM 100 */
- <MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4>, /* SODIMM 102 */
- <MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4>, /* SODIMM 104 */
- <MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4>, /* SODIMM 106 */
- <MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4>, /* SODIMM 108 */
- <MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4>, /* SODIMM 112 */
- <MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4>, /* SODIMM 114 */
- <MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4>, /* SODIMM 116 */
- <MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4>, /* SODIMM 118 */
- <MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4>; /* SODIMM 120 */
+ <MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x106>, /* SODIMM 88 */
+ <MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x106>, /* SODIMM 90 */
+ <MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x106>, /* SODIMM 92 */
+ <MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x106>, /* SODIMM 94 */
+ <MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x106>, /* SODIMM 96 */
+ <MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x106>, /* SODIMM 100 */
+ <MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x106>, /* SODIMM 102 */
+ <MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x106>, /* SODIMM 104 */
+ <MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x106>, /* SODIMM 106 */
+ <MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x106>, /* SODIMM 108 */
+ <MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x106>, /* SODIMM 112 */
+ <MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x106>, /* SODIMM 114 */
+ <MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x106>, /* SODIMM 116 */
+ <MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x106>, /* SODIMM 118 */
+ <MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x106>; /* SODIMM 120 */
};
pinctrl_gpio_hog2: gpiohog2grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1c4>; /* SODIMM 91 */
+ <MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x106>; /* SODIMM 91 */
};
pinctrl_gpio_hog3: gpiohog3grp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x1c4>, /* SODIMM 157 */
- <MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4>; /* SODIMM 187 */
+ <MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x146>, /* SODIMM 157 */
+ <MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x146>; /* SODIMM 187 */
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1c4>; /* SODIMM 252 */
+ <MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x146>; /* SODIMM 252 */
};
/* On-module I2C */
pinctrl_i2c1: i2c1grp {
fsl,pins =
- <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c6>, /* PMIC_I2C_SCL */
- <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c6>; /* PMIC_I2C_SDA */
+ <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000146>, /* PMIC_I2C_SCL */
+ <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000146>; /* PMIC_I2C_SDA */
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins =
- <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c6>, /* PMIC_I2C_SCL */
- <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c6>; /* PMIC_I2C_SDA */
+ <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x146>, /* PMIC_I2C_SCL */
+ <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x146>; /* PMIC_I2C_SDA */
};
/* Verdin I2C_4_CSI */
pinctrl_i2c2: i2c2grp {
fsl,pins =
- <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c6>, /* SODIMM 55 */
- <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c6>; /* SODIMM 53 */
+ <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000146>, /* SODIMM 55 */
+ <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000146>; /* SODIMM 53 */
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins =
- <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c6>, /* SODIMM 55 */
- <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c6>; /* SODIMM 53 */
+ <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x146>, /* SODIMM 55 */
+ <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x146>; /* SODIMM 53 */
};
/* Verdin I2C_2_DSI */
pinctrl_i2c3: i2c3grp {
fsl,pins =
- <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c6>, /* SODIMM 95 */
- <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c6>; /* SODIMM 93 */
+ <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000146>, /* SODIMM 95 */
+ <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000146>; /* SODIMM 93 */
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins =
- <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c6>, /* SODIMM 95 */
- <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c6>; /* SODIMM 93 */
+ <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x146>, /* SODIMM 95 */
+ <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x146>; /* SODIMM 93 */
};
/* Verdin I2C_1 */
pinctrl_i2c4: i2c4grp {
fsl,pins =
- <MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c6>, /* SODIMM 14 */
- <MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c6>; /* SODIMM 12 */
+ <MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000146>, /* SODIMM 14 */
+ <MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000146>; /* SODIMM 12 */
};
pinctrl_i2c4_gpio: i2c4gpiogrp {
fsl,pins =
- <MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c6>, /* SODIMM 14 */
- <MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c6>; /* SODIMM 12 */
+ <MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x146>, /* SODIMM 14 */
+ <MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x146>; /* SODIMM 12 */
};
/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x184>; /* SODIMM 42 */
+ <MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x6>; /* SODIMM 42 */
};
/* Verdin I2S_2_D_OUT shared with SAI5 */
pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x184>; /* SODIMM 46 */
+ <MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x6>; /* SODIMM 46 */
};
pinctrl_pcie0: pcie0grp {
@@ -1014,7 +1022,7 @@
pinctrl_pmic: pmicirqgrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41>; /* PMIC_INT# */
+ <MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141>; /* PMIC_INT# */
};
/* Verdin PWM_3_DSI shared with GPIO1_IO1 */
@@ -1036,82 +1044,82 @@
/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */
pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x184>; /* SODIMM 19 */
+ <MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x106>; /* SODIMM 19 */
};
pinctrl_reg_eth: regethgrp {
fsl,pins =
- <MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x184>; /* PMIC_EN_ETH */
+ <MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x146>; /* PMIC_EN_ETH */
};
pinctrl_reg_usb1_en: regusb1engrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x184>; /* SODIMM 155 */
+ <MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x106>; /* SODIMM 155 */
};
pinctrl_reg_usb2_en: regusb2engrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x184>; /* SODIMM 185 */
+ <MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x106>; /* SODIMM 185 */
};
pinctrl_sai2: sai2grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6>, /* SODIMM 32 */
- <MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6>, /* SODIMM 30 */
- <MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6>, /* SODIMM 38 */
- <MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6>, /* SODIMM 36 */
- <MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6>; /* SODIMM 34 */
+ <MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x6>, /* SODIMM 38 */
+ <MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x6>, /* SODIMM 30 */
+ <MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x6>, /* SODIMM 32 */
+ <MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x6>, /* SODIMM 36 */
+ <MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x6>; /* SODIMM 34 */
};
pinctrl_sai5: sai5grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6>, /* SODIMM 48 */
- <MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6>, /* SODIMM 44 */
- <MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6>, /* SODIMM 42 */
- <MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6>; /* SODIMM 46 */
+ <MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x6>, /* SODIMM 48 */
+ <MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x6>, /* SODIMM 44 */
+ <MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x6>, /* SODIMM 42 */
+ <MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x6>; /* SODIMM 46 */
};
/* control signal for optional ATTPM20P or SE050 */
pinctrl_pmic_tpm_ena: pmictpmenagrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x1c4>; /* PMIC_TPM_ENA */
+ <MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x106>; /* PMIC_TPM_ENA */
};
pinctrl_tsp: tspgrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x140>, /* SODIMM 148 */
- <MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x140>, /* SODIMM 152 */
- <MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x140>, /* SODIMM 154 */
- <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x140>, /* SODIMM 174 */
- <MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x140>; /* SODIMM 150 */
+ <MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x6>, /* SODIMM 148 */
+ <MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x6>, /* SODIMM 152 */
+ <MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x6>, /* SODIMM 154 */
+ <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x146>, /* SODIMM 174 */
+ <MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x6>; /* SODIMM 150 */
};
pinctrl_uart1: uart1grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4>, /* SODIMM 149 */
- <MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4>; /* SODIMM 147 */
+ <MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x146>, /* SODIMM 147 */
+ <MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x146>; /* SODIMM 149 */
};
pinctrl_uart2: uart2grp {
fsl,pins =
- <MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1c4>, /* SODIMM 129 */
- <MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1c4>, /* SODIMM 131 */
- <MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1c4>, /* SODIMM 133 */
- <MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1c4>; /* SODIMM 135 */
+ <MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x146>, /* SODIMM 133 */
+ <MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x146>, /* SODIMM 135 */
+ <MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x146>, /* SODIMM 131 */
+ <MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x146>; /* SODIMM 129 */
};
pinctrl_uart3: uart3grp {
fsl,pins =
- <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1c4>, /* SODIMM 137 */
- <MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1c4>, /* SODIMM 139 */
- <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1c4>, /* SODIMM 141 */
- <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x1c4>; /* SODIMM 143 */
+ <MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x146>, /* SODIMM 141 */
+ <MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x146>, /* SODIMM 139 */
+ <MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x146>, /* SODIMM 137 */
+ <MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x146>; /* SODIMM 143 */
};
pinctrl_uart4: uart4grp {
fsl,pins =
- <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x1c4>, /* SODIMM 151 */
- <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x1c4>; /* SODIMM 153 */
+ <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x146>, /* SODIMM 151 */
+ <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x146>; /* SODIMM 153 */
};
pinctrl_usdhc1: usdhc1grp {
@@ -1164,101 +1172,124 @@
pinctrl_usdhc2_cd: usdhc2cdgrp {
fsl,pins =
- <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4>; /* SODIMM 84 */
+ <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x6>; /* SODIMM 84 */
+ };
+
+ pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0>; /* SODIMM 84 */
};
pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x184>; /* SODIMM 76 */
+ <MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x6>; /* SODIMM 76 */
};
+ /*
+ * Note: Due to ERR050080 we use discrete external on-module resistors pulling-up to the
+ * on-module +V3.3_1.8_SD (LDO5) rail and explicitly disable the internal pull-ups here.
+ */
pinctrl_usdhc2: usdhc2grp {
fsl,pins =
- <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190>, /* SODIMM 78 */
- <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0>, /* SODIMM 74 */
- <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0>, /* SODIMM 80 */
- <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0>, /* SODIMM 82 */
- <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0>, /* SODIMM 70 */
- <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0>, /* SODIMM 72 */
- <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>;
+ <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>,
+ <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x90>, /* SODIMM 78 */
+ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x90>, /* SODIMM 74 */
+ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x90>, /* SODIMM 80 */
+ <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x90>, /* SODIMM 82 */
+ <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x90>, /* SODIMM 70 */
+ <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x90>; /* SODIMM 72 */
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins =
- <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194>,
- <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
- <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
- <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
- <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
- <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
- <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>;
+ <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>,
+ <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x94>,
+ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x94>,
+ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x94>,
+ <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x94>,
+ <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x94>,
+ <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x94>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins =
- <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196>,
- <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6>,
- <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6>,
- <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6>,
- <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6>,
- <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6>,
- <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0>;
+ <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x10>,
+ <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x96>,
+ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x96>,
+ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x96>,
+ <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x96>,
+ <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x96>,
+ <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x96>;
+ };
+
+ /* Avoid backfeeding with removed card power */
+ pinctrl_usdhc2_sleep: usdhc2slpgrp {
+ fsl,pins =
+ <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x0>,
+ <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x0>,
+ <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x0>,
+ <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0>,
+ <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0>,
+ <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0>,
+ <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0>;
};
- /* On-module Wi-Fi/BT or type specific SDHC interface */
- /* (e.g. on X52 extension slot of Verdin Development Board) */
+ /*
+ * On-module Wi-Fi/BT or type specific SDHC interface
+ * (e.g. on X52 extension slot of Verdin Development Board)
+ */
pinctrl_usdhc3: usdhc3grp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190>,
- <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0>,
- <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0>,
- <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0>,
- <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0>,
- <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0>;
+ <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x150>,
+ <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x150>,
+ <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x150>,
+ <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x150>,
+ <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x150>,
+ <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x150>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194>,
- <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4>,
- <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
- <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
- <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
- <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>;
+ <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x154>,
+ <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x154>,
+ <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x154>,
+ <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x154>,
+ <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x154>,
+ <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x154>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196>,
- <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6>,
- <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6>,
- <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6>,
- <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6>,
- <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6>;
+ <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x156>,
+ <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x156>,
+ <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x156>,
+ <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x156>,
+ <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x156>,
+ <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x156>;
};
pinctrl_wdog: wdoggrp {
fsl,pins =
- <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>; /* PMIC_WDI */
+ <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166>; /* PMIC_WDI */
};
pinctrl_wifi_ctrl: wifictrlgrp {
fsl,pins =
- <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x1c4>, /* WIFI_WKUP_BT */
- <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x1c4>, /* WIFI_W_WKUP_HOST */
- <MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1c4>; /* WIFI_WKUP_WLAN */
+ <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x46>, /* WIFI_WKUP_BT */
+ <MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x146>, /* WIFI_W_WKUP_HOST */
+ <MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x46>; /* WIFI_WKUP_WLAN */
};
pinctrl_wifi_i2s: bti2sgrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0xd6>, /* WIFI_TX_BCLK */
- <MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0xd6>, /* WIFI_TX_DATA0 */
- <MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0xd6>, /* WIFI_TX_SYNC */
- <MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0xd6>; /* WIFI_RX_DATA0 */
+ <MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0x6>, /* WIFI_TX_BCLK */
+ <MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0x6>, /* WIFI_TX_DATA0 */
+ <MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0x6>, /* WIFI_TX_SYNC */
+ <MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0x6>; /* WIFI_RX_DATA0 */
};
pinctrl_wifi_pwr_en: wifipwrengrp {
fsl,pins =
- <MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184>; /* PMIC_EN_WIFI */
+ <MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x6>; /* PMIC_EN_WIFI */
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1ee05677c2dd..1bf070473829 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -758,7 +758,7 @@
clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
<&clk IMX8MM_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -769,7 +769,7 @@
clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
<&clk IMX8MM_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -780,7 +780,7 @@
clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
<&clk IMX8MM_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -791,7 +791,7 @@
clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
<&clk IMX8MM_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 0f40b43ac091..02f37dcda7ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -175,6 +175,7 @@
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MN_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ uart-has-rtscts;
status = "okay";
};
@@ -258,6 +259,8 @@
fsl,pins = <
MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x40
MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x40
+ MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x40
+ MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x40
>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
index c6a8ed6745c1..fbbb3367037b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "imx8mn-bsh-smm-s2-common.dtsi"
+#include <dt-bindings/sound/tlv320aic31xx.h>
/ {
model = "BSH SMM S2 PRO";
@@ -16,6 +17,65 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
+
+ sound-tlv320aic31xx {
+ compatible = "fsl,imx-audio-tlv320aic31xx";
+ model = "tlv320aic31xx-hifi";
+ audio-cpu = <&sai3>;
+ audio-codec = <&tlv320dac3101>;
+ audio-asrc = <&easrc>;
+ audio-routing =
+ "Ext Spk", "SPL",
+ "Ext Spk", "SPR";
+ mclk-id = <PLL_CLKIN_BCLK>;
+ };
+
+ vdd_input: vdd_input {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_input";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&easrc {
+ fsl,asrc-rate = <48000>;
+ fsl,asrc-format = <10>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ tlv320dac3101: audio-codec@18 {
+ compatible = "ti,tlv320dac3101";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dac_rst>;
+ reg = <0x18>;
+ #sound-dai-cells = <0>;
+ HPVDD-supply = <&buck4_reg>;
+ SPRVDD-supply = <&vdd_input>;
+ SPLVDD-supply = <&vdd_input>;
+ AVDD-supply = <&buck4_reg>;
+ IOVDD-supply = <&buck4_reg>;
+ DVDD-supply = <&buck5_reg>;
+ reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ ai31xx-micbias-vg = <MICBIAS_AVDDV>;
+ clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+ };
+};
+
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ fsl,sai-mclk-direction-output;
+ status = "okay";
};
/* eMMC */
@@ -30,6 +90,36 @@
};
&iomuxc {
+ pinctrl_dac_rst: dacrstgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* DAC_RST */
+ >;
+ };
+
+ pinctrl_espi2: espi2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082
+ MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082
+ MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082
+ MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3
+ MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
new file mode 100644
index 000000000000..000e2c0596df
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "NXP i.MX8MNano DDR3L EVK board";
+ compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn";
+};
+
+&A53_0 {
+ cpu-supply = <&buck1>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck1>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck1>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck1>;
+};
+
+&i2c1 {
+ pmic: pmic@25 {
+ compatible = "nxp,pca9450b";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "VDD_SOC_0V9";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5: BUCK5 {
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6: BUCK6 {
+ regulator-name = "NVCC_DRAM_1V35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1: LDO1 {
+ regulator-name = "NVCC_SNVS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2: LDO2 {
+ regulator-name = "VDD_SNVS_0V8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3: LDO3 {
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "VDD_PHY_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5: LDO5 {
+ regulator-name = "NVCC_SD2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index b4225cfcb6d9..4eb467df5ba7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -41,18 +41,18 @@
regulators {
buck1: BUCK1{
- regulator-name = "BUCK1";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_SOC";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <2187500>;
+ regulator-name = "VDD_ARM_0V9";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@
};
buck4: BUCK4{
- regulator-name = "BUCK4";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5{
- regulator-name = "BUCK5";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "VDD_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <3400000>;
+ regulator-name = "NVCC_DRAM_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "NVCC_SNVS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
- regulator-name = "LDO2";
+ regulator-name = "VDD_SNVS_0V8";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1150000>;
+ regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDA_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
- regulator-name = "LDO4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDD_PHY_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
- regulator-name = "LDO5";
+ regulator-name = "NVCC_SD2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index c3f15192b76c..d1f6cccfa00d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -110,6 +110,22 @@
};
};
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi>;
+ status = "okay";
+
+ flash0: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <166000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -196,6 +212,15 @@
status = "okay";
};
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MN_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
&usbotg1 {
dr_mode = "otg";
hnp-disable;
@@ -267,6 +292,17 @@
>;
};
+ pinctrl_flexspi: flexspigrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2
+ MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82
+ MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82
+ MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
+ MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
+ MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
+ >;
+ };
+
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
@@ -347,6 +383,15 @@
>;
};
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x140
+ MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x140
+ MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x140
+ MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x140
+ >;
+ };
+
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 3c0e63d2e82d..367a232675aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -393,6 +393,13 @@
gw,voltage-divider-ohms = <10000 10000>;
};
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_5p0";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
channel@a2 {
gw,mode = <2>;
reg = <0xa2>;
@@ -625,6 +632,7 @@
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
rts-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
status = "okay";
bluetooth {
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 5c0ca2490561..e41e1d56f980 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -705,7 +705,7 @@
clocks = <&clk IMX8MN_CLK_PWM1_ROOT>,
<&clk IMX8MN_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -716,7 +716,7 @@
clocks = <&clk IMX8MN_CLK_PWM2_ROOT>,
<&clk IMX8MN_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -727,7 +727,7 @@
clocks = <&clk IMX8MN_CLK_PWM3_ROOT>,
<&clk IMX8MN_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -738,7 +738,7 @@
clocks = <&clk IMX8MN_CLK_PWM4_ROOT>,
<&clk IMX8MN_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -933,7 +933,7 @@
};
usdhc1: mmc@30b40000 {
- compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
@@ -947,7 +947,7 @@
};
usdhc2: mmc@30b50000 {
- compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
@@ -961,7 +961,7 @@
};
usdhc3: mmc@30b60000 {
- compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mn-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MN_CLK_IPG_ROOT>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
new file mode 100644
index 000000000000..70a701a624a6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/dts-v1/;
+
+#include "imx8mp.dtsi"
+#include "imx8mp-icore-mx8mp.dtsi"
+#include <dt-bindings/usb/pd.h>
+
+/ {
+ model = "Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit";
+ compatible = "engicam,icore-mx8mp-edimm2.2", "engicam,icore-mx8mp",
+ "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ reg_usb1_vbus: regulator-usb1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "usb1_host_vbus";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ };
+};
+
+/* Ethernet */
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-handle = <&ethphy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ micrel,led-mode = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/* console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* SDCARD */
+&usdhc2 {
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ pinctrl-names = "default" ;
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x19
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
+ MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS 0x140
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
+ >;
+ };
+
+ pinctrl_reg_usb1: regusb1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x19
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
new file mode 100644
index 000000000000..5116079cce22
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-icore-mx8mp.dtsi
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 NXP
+ * Copyright (c) 2019 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+ compatible = "engicam,icore-mx8mp", "fsl,imx8mp";
+};
+
+&A53_0 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pca9450: pmic@25 {
+ compatible = "nxp,pca9450c";
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ reg = <0x25>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "BUCK1";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck2: BUCK2 {
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1025000>;
+ regulator-min-microvolt = <720000>;
+ regulator-name = "BUCK2";
+ regulator-ramp-delay = <3125>;
+ };
+
+ buck4: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "BUCK4";
+ };
+
+ buck5: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1650000>;
+ regulator-name = "BUCK5";
+ };
+
+ buck6: BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1155000>;
+ regulator-min-microvolt = <1045000>;
+ regulator-name = "BUCK6";
+ };
+
+ ldo1: LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1650000>;
+ regulator-name = "LDO1";
+ };
+
+ ldo3: LDO3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1890000>;
+ regulator-min-microvolt = <1710000>;
+ regulator-name = "LDO3";
+ };
+
+ ldo5: LDO5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "LDO5";
+ };
+ };
+ };
+};
+
+/* EMMC */
+&usdhc3 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x41
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
new file mode 100644
index 000000000000..101d31147603
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -0,0 +1,896 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "Gateworks Venice GW74xx i.MX8MP board";
+ compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ ethernet2 = &lan1;
+ ethernet3 = &lan2;
+ ethernet4 = &lan3;
+ ethernet5 = &lan4;
+ ethernet6 = &lan5;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-0 {
+ label = "user_pb";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ key-1 {
+ label = "user_pb1x";
+ linux,code = <BTN_1>;
+ interrupt-parent = <&gsc>;
+ interrupts = <0>;
+ };
+
+ key-2 {
+ label = "key_erased";
+ linux,code = <BTN_2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <1>;
+ };
+
+ key-3 {
+ label = "eeprom_wp";
+ linux,code = <BTN_3>;
+ interrupt-parent = <&gsc>;
+ interrupts = <2>;
+ };
+
+ key-4 {
+ label = "tamper";
+ linux,code = <BTN_4>;
+ interrupt-parent = <&gsc>;
+ interrupts = <5>;
+ };
+
+ key-5 {
+ label = "switch_hold";
+ linux,code = <BTN_5>;
+ interrupt-parent = <&gsc>;
+ interrupts = <7>;
+ };
+ };
+
+ led-controller {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led-0 {
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pps>;
+ gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_vbus: regulator-usb2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb_usb2_vbus";
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_can>;
+ regulator-name = "can2_stby";
+ gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_wifi_en: regulator-wifi-en {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_wifi>;
+ compatible = "regulator-fixed";
+ regulator-name = "wl";
+ gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <100>;
+ enable-active-high;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+/* off-board header */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "rgmii-id";
+ local-mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_can2_stby>;
+ status = "okay";
+};
+
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "dio0", "", "dio1", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "m2_gdis#", "", "", "", "", "", "", "m2_rst#",
+ "", "", "", "", "", "", "", "",
+ "m2_off#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names =
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "m2_wdis#", "", "", "",
+ "", "", "", "", "", "", "", "uart_rs485";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "uart_half", "uart_term", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ gsc: gsc@20 {
+ compatible = "gw,gsc";
+ reg = <0x20>;
+ pinctrl-0 = <&pinctrl_gsc>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ adc {
+ compatible = "gw,gsc-adc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@6 {
+ gw,mode = <0>;
+ reg = <0x06>;
+ label = "temp";
+ };
+
+ channel@8 {
+ gw,mode = <1>;
+ reg = <0x08>;
+ label = "vdd_bat";
+ };
+
+ channel@82 {
+ gw,mode = <2>;
+ reg = <0x82>;
+ label = "vdd_adc1";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@84 {
+ gw,mode = <2>;
+ reg = <0x84>;
+ label = "vdd_adc2";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@86 {
+ gw,mode = <2>;
+ reg = <0x86>;
+ label = "vdd_vin";
+ gw,voltage-divider-ohms = <22100 1000>;
+ };
+
+ channel@88 {
+ gw,mode = <2>;
+ reg = <0x88>;
+ label = "vdd_3p3";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@8c {
+ gw,mode = <2>;
+ reg = <0x8c>;
+ label = "vdd_2p5";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+
+ channel@90 {
+ gw,mode = <2>;
+ reg = <0x90>;
+ label = "vdd_soc";
+ };
+
+ channel@92 {
+ gw,mode = <2>;
+ reg = <0x92>;
+ label = "vdd_arm";
+ };
+
+ channel@98 {
+ gw,mode = <2>;
+ reg = <0x98>;
+ label = "vdd_1p8";
+ };
+
+ channel@9a {
+ gw,mode = <2>;
+ reg = <0x9a>;
+ label = "vdd_1p2";
+ };
+
+ channel@9c {
+ gw,mode = <2>;
+ reg = <0x9c>;
+ label = "vdd_dram";
+ };
+
+ channel@a2 {
+ gw,mode = <2>;
+ reg = <0xa2>;
+ label = "vdd_gsc";
+ gw,voltage-divider-ohms = <10000 10000>;
+ };
+ };
+ };
+
+ gpio: gpio@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gsc>;
+ interrupts = <4>;
+ };
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1025000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1045000>;
+ regulator-max-microvolt = <1155000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c02";
+ reg = <0x51>;
+ pagesize = <16>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c02";
+ reg = <0x52>;
+ pagesize = <16>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c02";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ accelerometer@19 {
+ compatible = "st,lis2de12";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_accel>;
+ reg = <0x19>;
+ st,drdy-int-pin = <1>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "INT1";
+ };
+
+ switch: switch@5f {
+ compatible = "microchip,ksz9897";
+ reg = <0x5f>;
+ pinctrl-0 = <&pinctrl_ksz>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lan1: port@0 {
+ reg = <0>;
+ label = "lan1";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan2: port@1 {
+ reg = <1>;
+ label = "lan2";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan3: port@2 {
+ reg = <2>;
+ label = "lan3";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan4: port@3 {
+ reg = <3>;
+ label = "lan4";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ lan5: port@4 {
+ reg = <4>;
+ label = "lan5";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&fec>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+/* off-board header */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+/* off-board header */
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+/* GPS / off-board header */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* RS232 console */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+/* USB1 - Type C front panel */
+&usb3_phy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ status = "okay";
+};
+
+&usb3_0 {
+ fsl,over-current-active-low;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* USB2 - USB3.0 Hub */
+&usb3_phy1 {
+ vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
+
+&usb3_1 {
+ fsl,permanently-attached;
+ fsl,disable-port-power-control;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */
+ MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */
+ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */
+ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */
+ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */
+ MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
+ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
+ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
+ >;
+ };
+
+ pinctrl_accel: accelgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159
+ >;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
+ MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141
+ MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
+ MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
+ >;
+ };
+
+ pinctrl_gsc: gscgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_ksz: kszgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */
+ MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */
+ >;
+ };
+
+ pinctrl_gpio_leds: ledgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19
+ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141
+ >;
+ };
+
+ pinctrl_pps: ppsgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141
+ >;
+ };
+
+ pinctrl_reg_can: regcangrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154
+ >;
+ };
+
+ pinctrl_reg_usb2: regusb2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141
+ >;
+ };
+
+ pinctrl_reg_wifi: regwifigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK
+ MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK
+ >;
+ };
+
+ pinctrl_spi2: spi2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
+ MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
+ MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140
+ MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x140
+ >;
+ };
+
+ pinctrl_uart3_gpio: uart3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
+ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usb1: usb1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140
+ MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
+ MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
new file mode 100644
index 000000000000..4b8f86f63081
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/* TODO: Audio Codec */
+
+&backlight {
+ power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+ status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+ status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+ status = "okay";
+};
+
+&eqos {
+ status = "okay";
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+&flexcan2 {
+ status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+ status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+ status = "okay";
+};
+
+&hwmon_temp {
+ vs-supply = <&reg_1p8v>;
+ status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ status = "okay";
+
+ /* TODO: Audio Codec */
+};
+
+/* TODO: Verdin PCIE_1 */
+
+/* Verdin PWM_1 */
+&pwm1 {
+ status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+ status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+ status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+ vin-supply = <&reg_3p3v>;
+};
+
+/* TODO: Verdin I2S_1 */
+
+/* Verdin UART_1 */
+&uart1 {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+ status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
new file mode 100644
index 000000000000..cefabe65b252
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+ /* TODO: Audio Codec */
+
+ reg_eth2phy: regulator-eth2phy {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
+ off-on-delay = <500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_ETH";
+ startup-delay-us = <200000>;
+ vin-supply = <&reg_3p3v>;
+ };
+};
+
+&fec {
+ phy-supply = <&reg_eth2phy>;
+ status = "okay";
+};
+
+&gpio_expander_21 {
+ status = "okay";
+ vcc-supply = <&reg_1p8v>;
+};
+
+/* TODO: Verdin I2C_1 with Audio Codec */
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart1 {
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+ max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000000..68147b0c1b35
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus on Dahlia Board";
+ compatible = "toradex,verdin-imx8mp-nonwifi-dahlia",
+ "toradex,verdin-imx8mp-nonwifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000000..879ff687cf2b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-nonwifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus on Verdin Development Board";
+ compatible = "toradex,verdin-imx8mp-nonwifi-dev",
+ "toradex,verdin-imx8mp-nonwifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
new file mode 100644
index 000000000000..91d597391b7c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio5 {
+ gpio-line-names = "SODIMM_42",
+ "SODIMM_46",
+ "SODIMM_187",
+ "SODIMM_20",
+ "SODIMM_22",
+ "SODIMM_15",
+ "SODIMM_196",
+ "SODIMM_200",
+ "SODIMM_198",
+ "SODIMM_202",
+ "SODIMM_164",
+ "SODIMM_152",
+ "SODIMM_116",
+ "SODIMM_128",
+ "",
+ "",
+ "SODIMM_55",
+ "SODIMM_53",
+ "SODIMM_95",
+ "SODIMM_93",
+ "SODIMM_14",
+ "SODIMM_12",
+ "SODIMM_129",
+ "SODIMM_131",
+ "SODIMM_137",
+ "SODIMM_139",
+ "SODIMM_147",
+ "SODIMM_149",
+ "SODIMM_151",
+ "SODIMM_153";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+ <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+ <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+ <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+ <&pinctrl_hdmi_hog>;
+};
+
+/*
+ * Verdin UART_4
+ * Often used by the M7 and then should not be enabled here.
+ */
+&uart4 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000000..804567f6ccee
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dahlia.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus WB on Dahlia Board";
+ compatible = "toradex,verdin-imx8mp-wifi-dahlia",
+ "toradex,verdin-imx8mp-wifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
new file mode 100644
index 000000000000..c1713c28cdce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mp-verdin.dtsi"
+#include "imx8mp-verdin-wifi.dtsi"
+#include "imx8mp-verdin-dev.dtsi"
+
+/ {
+ model = "Toradex Verdin iMX8M Plus WB on Verdin Development Board";
+ compatible = "toradex,verdin-imx8mp-wifi-dev",
+ "toradex,verdin-imx8mp-wifi",
+ "toradex,verdin-imx8mp",
+ "fsl,imx8mp";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
new file mode 100644
index 000000000000..36289c175e6e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+ reg_wifi_en: regulator-wifi-en {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "PDn_AW-CM276NF";
+ startup-delay-us = <2000>;
+ };
+};
+
+&gpio5 {
+ gpio-line-names = "SODIMM_42",
+ "SODIMM_46",
+ "SODIMM_187",
+ "SODIMM_20",
+ "SODIMM_22",
+ "SODIMM_15",
+ "SODIMM_196",
+ "SODIMM_200",
+ "SODIMM_198",
+ "SODIMM_202",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_55",
+ "SODIMM_53",
+ "SODIMM_95",
+ "SODIMM_93",
+ "SODIMM_14",
+ "SODIMM_12",
+ "SODIMM_129",
+ "SODIMM_131",
+ "SODIMM_137",
+ "SODIMM_139",
+ "SODIMM_147",
+ "SODIMM_149",
+ "SODIMM_151",
+ "SODIMM_153";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+ <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+ <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+ <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hog4>,
+ <&pinctrl_hdmi_hog>;
+};
+
+/* On-module Bluetooth */
+&uart4 {
+ uart-has-rtscts;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_uart>;
+ status = "okay";
+};
+
+/* On-module Wi-Fi */
+&usdhc1 {
+ bus-width = <4>;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+ non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_wifi_ctrl>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_wifi_ctrl>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_wifi_ctrl>;
+ vmmc-supply = <&reg_wifi_en>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
new file mode 100644
index 000000000000..fb17e329cd37
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -0,0 +1,1380 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "dt-bindings/pwm/pwm.h"
+#include "imx8mp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ /* Ethernet aliases to ensure correct MAC addresses */
+ ethernet0 = &eqos;
+ ethernet1 = &fec;
+ rtc0 = &rtc_i2c;
+ rtc1 = &snvs_rtc;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
+ /* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+ enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+ power-supply = <&reg_3p3v>;
+ /* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+ pwms = <&pwm3 0 6666667 PWM_POLARITY_INVERTED>;
+ status = "disabled";
+ };
+
+ backlight_mezzanine: backlight-mezzanine {
+ compatible = "pwm-backlight";
+ brightness-levels = <0 45 63 88 119 158 203 255>;
+ default-brightness-level = <4>;
+ /* Verdin GPIO 4 (SODIMM 212) */
+ enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ /* Verdin PWM_2 (SODIMM 16) */
+ pwms = <&pwm2 0 6666667 PWM_POLARITY_INVERTED>;
+ status = "disabled";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ wakeup {
+ debounce-interval = <10>;
+ /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
+ /* Carrier Board Supplies */
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "+V1.8_SW";
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_SW";
+ };
+
+ reg_5p0v: regulator-5p0v {
+ compatible = "regulator-fixed";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "+V5_SW";
+ };
+
+ /* Non PMIC On-module Supplies */
+ reg_module_eth1phy: regulator-module-eth1phy {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+ off-on-delay = <500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_eth>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "On-module +V3.3_ETH";
+ startup-delay-us = <200000>;
+ vin-supply = <&reg_vdd_3v3>;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin USB_1_EN (SODIMM 155) */
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_vbus>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "USB_1_EN";
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin USB_2_EN (SODIMM 185) */
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2_vbus>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "USB_2_EN";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin SD_1_PWR_EN (SODIMM 76) */
+ gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ off-on-delay = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "+V3.3_SD";
+ startup-delay-us = <2000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* Use the kernel configuration settings instead */
+ /delete-node/ linux,cma;
+ };
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&eqos {
+ phy-handle = <&ethphy0>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&reg_module_eth1phy>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>;
+ snps,force_thresh_dma_mode;
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ eee-broken-100tx;
+ eee-broken-1000t;
+ interrupt-parent = <&gpio1>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <0>;
+ reg = <7>;
+ };
+ };
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <5>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ snps,map-to-dma-channel = <0>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ snps,map-to-dma-channel = <1>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ snps,map-to-dma-channel = <2>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ snps,map-to-dma-channel = <3>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ snps,map-to-dma-channel = <4>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <5>;
+ snps,tx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,priority = <0x1>;
+ };
+
+ queue1 {
+ snps,dcb-algorithm;
+ snps,priority = <0x2>;
+ };
+
+ queue2 {
+ snps,dcb-algorithm;
+ snps,priority = <0x4>;
+ };
+
+ queue3 {
+ snps,dcb-algorithm;
+ snps,priority = <0x8>;
+ };
+
+ queue4 {
+ snps,dcb-algorithm;
+ snps,priority = <0xf0>;
+ };
+ };
+};
+
+/* Verdin ETH_2_RGMII */
+&fec {
+ fsl,magic-packet;
+ phy-handle = <&ethphy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-1 = <&pinctrl_fec_sleep>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ interrupt-parent = <&gpio4>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+/* Verdin CAN_1 */
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
+
+/* Verdin CAN_2 */
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "disabled";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+ gpio-line-names = "SODIMM_206",
+ "SODIMM_208",
+ "",
+ "",
+ "",
+ "SODIMM_210",
+ "SODIMM_212",
+ "SODIMM_216",
+ "SODIMM_218",
+ "",
+ "",
+ "SODIMM_16",
+ "SODIMM_155",
+ "SODIMM_157",
+ "SODIMM_185",
+ "SODIMM_91";
+};
+
+&gpio2 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_143",
+ "SODIMM_141",
+ "",
+ "",
+ "SODIMM_161",
+ "",
+ "SODIMM_84",
+ "SODIMM_78",
+ "SODIMM_74",
+ "SODIMM_80",
+ "SODIMM_82",
+ "SODIMM_70",
+ "SODIMM_72";
+
+ ctrl-sleep-moci-hog {
+ gpio-hog;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ line-name = "CTRL_SLEEP_MOCI#";
+ output-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+ };
+};
+
+&gpio3 {
+ gpio-line-names = "SODIMM_52",
+ "SODIMM_54",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_56",
+ "SODIMM_58",
+ "SODIMM_60",
+ "SODIMM_62",
+ "",
+ "",
+ "",
+ "",
+ "SODIMM_66",
+ "",
+ "SODIMM_64",
+ "",
+ "",
+ "SODIMM_34",
+ "SODIMM_19",
+ "",
+ "SODIMM_32",
+ "",
+ "",
+ "SODIMM_30",
+ "SODIMM_59",
+ "SODIMM_57",
+ "SODIMM_63",
+ "SODIMM_61";
+};
+
+&gpio4 {
+ gpio-line-names = "SODIMM_252",
+ "SODIMM_222",
+ "SODIMM_36",
+ "SODIMM_220",
+ "SODIMM_193",
+ "SODIMM_191",
+ "SODIMM_201",
+ "SODIMM_203",
+ "SODIMM_205",
+ "SODIMM_207",
+ "SODIMM_199",
+ "SODIMM_197",
+ "SODIMM_221",
+ "SODIMM_219",
+ "SODIMM_217",
+ "SODIMM_215",
+ "SODIMM_211",
+ "SODIMM_213",
+ "SODIMM_189",
+ "SODIMM_244",
+ "SODIMM_38",
+ "",
+ "SODIMM_76",
+ "SODIMM_135",
+ "SODIMM_133",
+ "SODIMM_17",
+ "SODIMM_24",
+ "SODIMM_26",
+ "SODIMM_21",
+ "SODIMM_256",
+ "SODIMM_48",
+ "SODIMM_44";
+};
+
+/* On-module I2C */
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pca9450: pmic@25 {
+ compatible = "nxp,pca9450c";
+ interrupt-parent = <&gpio1>;
+ /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ reg = <0x25>;
+ sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
+ * I2C level shifter for the TLA2024 ADC behind this PMIC.
+ */
+
+ regulators {
+ BUCK1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <720000>;
+ regulator-name = "On-module +VDD_SOC (BUCK1)";
+ regulator-ramp-delay = <3125>;
+ };
+
+ BUCK2 {
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1025000>;
+ regulator-min-microvolt = <720000>;
+ regulator-name = "On-module +VDD_ARM (BUCK2)";
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "On-module +V3.3 (BUCK4)";
+ };
+
+ reg_vdd_1v8: BUCK5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "PWR_1V8_MOCI (BUCK5)";
+ };
+
+ BUCK6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1155000>;
+ regulator-min-microvolt = <1045000>;
+ regulator-name = "On-module +VDD_DDR (BUCK6)";
+ };
+
+ LDO1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1950000>;
+ regulator-min-microvolt = <1650000>;
+ regulator-name = "On-module +V1.8_SNVS (LDO1)";
+ };
+
+ LDO2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1150000>;
+ regulator-min-microvolt = <800000>;
+ regulator-name = "On-module +V0.8_SNVS (LDO2)";
+ };
+
+ LDO3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-module +V1.8A (LDO3)";
+ };
+
+ LDO4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "On-module +V3.3_ADC (LDO4)";
+ };
+
+ LDO5 {
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "On-module +V3.3_1.8_SD (LDO5)";
+ };
+ };
+ };
+
+ rtc_i2c: rtc@32 {
+ compatible = "epson,rx8130";
+ reg = <0x32>;
+ };
+
+ /* On-module temperature sensor */
+ hwmon_temp_module: sensor@48 {
+ compatible = "ti,tmp1075";
+ reg = <0x48>;
+ vs-supply = <&reg_vdd_1v8>;
+ };
+
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Verdin I2C_1 (ADC_4 - ADC_3) */
+ channel@0 {
+ reg = <0>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 (ADC_4 - ADC_1) */
+ channel@1 {
+ reg = <1>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 (ADC_3 - ADC_1) */
+ channel@2 {
+ reg = <2>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 (ADC_2 - ADC_1) */
+ channel@3 {
+ reg = <3>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 ADC_4 */
+ channel@4 {
+ reg = <4>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 ADC_3 */
+ channel@5 {
+ reg = <5>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 ADC_2 */
+ channel@6 {
+ reg = <6>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+
+ /* Verdin I2C_1 ADC_1 */
+ channel@7 {
+ reg = <7>;
+ ti,datarate = <4>;
+ ti,gain = <2>;
+ };
+ };
+
+ eeprom@50 {
+ compatible = "st,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+ /* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
+ clock-frequency = <10000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ atmel_mxt_ts_mezzanine: touch-mezzanine@4a {
+ compatible = "atmel,maxtouch";
+ /* Verdin GPIO_3 (SODIMM 210) */
+ interrupt-parent = <&gpio1>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x4a>;
+ /* Verdin GPIO_2 (SODIMM 208) */
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+};
+
+/* TODO: Verdin I2C_3_HDMI */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+ gpio_expander_21: gpio-expander@21 {
+ compatible = "nxp,pcal6416";
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0x21>;
+ vcc-supply = <&reg_3p3v>;
+ status = "disabled";
+ };
+
+ lvds_ti_sn65dsi83: bridge@2c {
+ compatible = "ti,sn65dsi83";
+ /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+ /* Verdin GPIO_10_DSI (SODIMM 21) */
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+ reg = <0x2c>;
+ status = "disabled";
+ };
+
+ /* Current measurement into module VCC */
+ hwmon: hwmon@40 {
+ compatible = "ti,ina219";
+ reg = <0x40>;
+ shunt-resistor = <10000>;
+ status = "disabled";
+ };
+
+ hdmi_lontium_lt8912: hdmi@48 {
+ compatible = "lontium,lt8912b";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+ reg = <0x48>;
+ /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+ /* Verdin GPIO_10_DSI (SODIMM 21) */
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+ };
+
+ atmel_mxt_ts: touch@4a {
+ compatible = "atmel,maxtouch";
+ /*
+ * Verdin GPIO_9_DSI
+ * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+ */
+ interrupt-parent = <&gpio4>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+ reg = <0x4a>;
+ /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ /* Temperature sensor on carrier board */
+ hwmon_temp: sensor@4f {
+ compatible = "ti,tmp75c";
+ reg = <0x4f>;
+ status = "disabled";
+ };
+
+ /* EEPROM on display adapter (MIPI DSI Display Adapter) */
+ eeprom_display_adapter: eeprom@50 {
+ compatible = "st,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ status = "disabled";
+ };
+
+ /* EEPROM on carrier board */
+ eeprom_carrier_board: eeprom@57 {
+ compatible = "st,24c02";
+ pagesize = <16>;
+ reg = <0x57>;
+ status = "disabled";
+ };
+};
+
+/* TODO: Verdin PCIE_1 */
+
+/* Verdin PWM_1 */
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_1>;
+ #pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_2>;
+ #pwm-cells = <3>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm_3>;
+ #pwm-cells = <3>;
+};
+
+/* TODO: Verdin I2S_1 */
+
+/* TODO: Verdin I2S_2 */
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+};
+
+/* Verdin UART_4, used for Bluetooth on Wi-Fi/Bluetooth SKUs */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usb3_phy0 {
+ vbus-supply = <&reg_usb1_vbus>;
+};
+
+&usb_dwc3_0 {
+ adp-disable;
+ dr_mode = "otg";
+ hnp-disable;
+ maximum-speed = "high-speed";
+ over-current-active-low;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_1_id>;
+ srp-disable;
+};
+
+/* Verdin USB_2 */
+&usb3_phy1 {
+ vbus-supply = <&reg_usb2_vbus>;
+};
+
+&usb_dwc3_1 {
+ disable-over-current;
+ dr_mode = "host";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+ pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd_sleep>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+/* On-module eMMC */
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ bus-width = <8>;
+ non-removable;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ status = "okay";
+};
+
+&wdog1 {
+ fsl,ext-reset-output;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bt_uart: btuartgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS 0x1c4>,
+ <MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX 0x1c4>,
+ <MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX 0x1c4>,
+ <MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS 0x1c4>;
+ };
+
+ pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x1c4>; /* SODIMM 256 */
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c4>, /* SODIMM 198 */
+ <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x4>, /* SODIMM 200 */
+ <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x4>, /* SODIMM 196 */
+ <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c4>; /* SODIMM 202 */
+ };
+
+ /* Connection On Board PHY */
+ pinctrl_eqos: eqosgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3>,
+ <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3>,
+ <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91>,
+ <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91>,
+ <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91>,
+ <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91>,
+ <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91>,
+ <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91>,
+ <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f>,
+ <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f>,
+ <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f>,
+ <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f>;
+ };
+
+ /* ETH_INT# shared with TPM_INT# (usually N/A) */
+ pinctrl_eth_tpm_int: ethtpmintgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c4>;
+ };
+
+ /* Connection Carrier Board PHY ETH_2 */
+ pinctrl_fec: fecgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>, /* SODIMM 193 */
+ <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>, /* SODIMM 191 */
+ <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>, /* SODIMM 201 */
+ <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>, /* SODIMM 203 */
+ <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>, /* SODIMM 205 */
+ <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>, /* SODIMM 207 */
+ <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>, /* SODIMM 197 */
+ <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>, /* SODIMM 199 */
+ <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f>, /* SODIMM 221 */
+ <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f>, /* SODIMM 219 */
+ <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f>, /* SODIMM 217 */
+ <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f>, /* SODIMM 215 */
+ <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f>, /* SODIMM 211 */
+ <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f>, /* SODIMM 213 */
+ <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x1c4>; /* SODIMM 189 */
+ };
+
+ pinctrl_fec_sleep: fecsleepgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3>, /* SODIMM 193 */
+ <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3>, /* SODIMM 191 */
+ <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91>, /* SODIMM 201 */
+ <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91>, /* SODIMM 203 */
+ <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91>, /* SODIMM 205 */
+ <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91>, /* SODIMM 207 */
+ <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91>, /* SODIMM 197 */
+ <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91>, /* SODIMM 199 */
+ <MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x1f>, /* SODIMM 221 */
+ <MX8MP_IOMUXC_SAI1_TXD1__GPIO4_IO13 0x1f>, /* SODIMM 219 */
+ <MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x1f>, /* SODIMM 217 */
+ <MX8MP_IOMUXC_SAI1_TXD3__GPIO4_IO15 0x1f>, /* SODIMM 215 */
+ <MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16 0x1f>, /* SODIMM 211 */
+ <MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17 0x1f>, /* SODIMM 213 */
+ <MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x184>; /* SODIMM 189 */
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154>, /* SODIMM 22 */
+ <MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154>; /* SODIMM 20 */
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154>, /* SODIMM 26 */
+ <MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154>; /* SODIMM 24 */
+ };
+
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2>, /* SODIMM 52 */
+ <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>, /* SODIMM 54 */
+ <MX8MP_IOMUXC_NAND_DQS__FLEXSPI_A_DQS 0x82>, /* SODIMM 66 */
+ <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>, /* SODIMM 56 */
+ <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>, /* SODIMM 58 */
+ <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>, /* SODIMM 60 */
+ <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>, /* SODIMM 62 */
+ <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x184>; /* SODIMM 206 */
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x1c4>; /* SODIMM 208 */
+ };
+
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x184>; /* SODIMM 210 */
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x184>; /* SODIMM 212 */
+ };
+
+ pinctrl_gpio5: gpio5grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x184>; /* SODIMM 216 */
+ };
+
+ pinctrl_gpio6: gpio6grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x184>; /* SODIMM 218 */
+ };
+
+ pinctrl_gpio7: gpio7grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x184>; /* SODIMM 220 */
+ };
+
+ pinctrl_gpio8: gpio8grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x184>; /* SODIMM 222 */
+ };
+
+ /* Verdin GPIO_9_DSI (pulled-up as active-low) */
+ pinctrl_gpio_9_dsi: gpio9dsigrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x1c4>; /* SODIMM 17 */
+ };
+
+ /* Verdin GPIO_10_DSI */
+ pinctrl_gpio_10_dsi: gpio10dsigrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x1c4>; /* SODIMM 21 */
+ };
+
+ /* Non-wifi MSP usage only */
+ pinctrl_gpio_hog1: gpiohog1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 0x1c4>, /* SODIMM 116 */
+ <MX8MP_IOMUXC_ECSPI2_MOSI__GPIO5_IO11 0x1c4>, /* SODIMM 152 */
+ <MX8MP_IOMUXC_ECSPI2_SCLK__GPIO5_IO10 0x1c4>, /* SODIMM 164 */
+ <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c4>; /* SODIMM 128 */
+ };
+
+ /* USB_2_OC# */
+ pinctrl_gpio_hog2: gpiohog2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x1c4>; /* SODIMM 187 */
+ };
+
+ pinctrl_gpio_hog3: gpiohog3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x1c4>, /* SODIMM 157 */
+ /* CSI_1_MCLK */
+ <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x1c4>; /* SODIMM 91 */
+ };
+
+ /* Wifi usage only */
+ pinctrl_gpio_hog4: gpiohog4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28 0x1c4>, /* SODIMM 151 */
+ <MX8MP_IOMUXC_UART4_TXD__GPIO5_IO29 0x1c4>; /* SODIMM 153 */
+ };
+
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x1c4>; /* SODIMM 252 */
+ };
+
+ pinctrl_hdmi_hog: hdmihoggrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>, /* SODIMM 63 */
+ <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3>, /* SODIMM 59 */
+ <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3>, /* SODIMM 57 */
+ <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>; /* SODIMM 61 */
+ };
+
+ /* On-module I2C */
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c6>, /* PMIC_I2C_SCL */
+ <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c6>; /* PMIC_I2C_SDA */
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c6>, /* PMIC_I2C_SCL */
+ <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c6>; /* PMIC_I2C_SDA */
+ };
+
+ /* Verdin I2C_2_DSI */
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c6>, /* SODIMM 55 */
+ <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c6>; /* SODIMM 53 */
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c6>, /* SODIMM 55 */
+ <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c6>; /* SODIMM 53 */
+ };
+
+ /* Verdin I2C_4_CSI */
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c6>, /* SODIMM 95 */
+ <MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c6>; /* SODIMM 93 */
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c6>, /* SODIMM 95 */
+ <MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c6>; /* SODIMM 93 */
+ };
+
+ /* Verdin I2C_1 */
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c6>, /* SODIMM 14 */
+ <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c6>; /* SODIMM 12 */
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001c6>, /* SODIMM 14 */
+ <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c6>; /* SODIMM 12 */
+ };
+
+ /* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+ pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x184>; /* SODIMM 42 */
+ };
+
+ /* Verdin I2S_2_D_OUT shared with SAI3 */
+ pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x184>; /* SODIMM 46 */
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x4>, /* SODIMM 244 */
+ <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x1c4>; /* PMIC_EN_PCIe_CLK, unused */
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c4>; /* PMIC_INT# */
+ };
+
+ pinctrl_pwm_1: pwm1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x6>; /* SODIMM 15 */
+ };
+
+ pinctrl_pwm_2: pwm2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO11__PWM2_OUT 0x6>; /* SODIMM 16 */
+ };
+
+ /* Verdin PWM_3_DSI shared with GPIO3_IO20 */
+ pinctrl_pwm_3: pwm3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT 0x6>; /* SODIMM 19 */
+ };
+
+ /* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM3_OUT */
+ pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsi1hpdgpiogrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x184>; /* SODIMM 19 */
+ };
+
+ pinctrl_reg_eth: regethgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x184>; /* PMIC_EN_ETH */
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI1_MCLK__AUDIOMIX_SAI1_MCLK 0x96>, /* SODIMM 38 */
+ <MX8MP_IOMUXC_SAI1_RXD0__AUDIOMIX_SAI1_RX_DATA00 0x1d6>, /* SODIMM 36 */
+ <MX8MP_IOMUXC_SAI5_MCLK__AUDIOMIX_SAI1_TX_BCLK 0x1d6>, /* SODIMM 30 */
+ <MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI1_TX_SYNC 0x1d6>, /* SODIMM 32 */
+ <MX8MP_IOMUXC_SAI5_RXFS__AUDIOMIX_SAI1_TX_DATA00 0x96>; /* SODIMM 34 */
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x1d6>, /* SODIMM 48 */
+ <MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x1d6>, /* SODIMM 42 */
+ <MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x96>, /* SODIMM 46 */
+ <MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x1d6>; /* SODIMM 44 */
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x1c4>, /* SODIMM 135 */
+ <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x1c4>, /* SODIMM 133 */
+ <MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x1c4>, /* SODIMM 129 */
+ <MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x1c4>; /* SODIMM 131 */
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x1c4>, /* SODIMM 143 */
+ <MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x1c4>, /* SODIMM 141 */
+ <MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x1c4>, /* SODIMM 137 */
+ <MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x1c4>; /* SODIMM 139 */
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x1c4>, /* SODIMM 147 */
+ <MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x1c4>; /* SODIMM 149 */
+ };
+
+ /* Non-wifi usage only */
+ pinctrl_uart4: uart4grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x1c4>, /* SODIMM 151 */
+ <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x1c4>; /* SODIMM 153 */
+ };
+
+ pinctrl_usb1_vbus: usb1vbusgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x19>; /* SODIMM 155 */
+ };
+
+ /* USB_1_ID */
+ pinctrl_usb_1_id: usb1idgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x1c4>; /* SODIMM 161 */
+ };
+
+ pinctrl_usb2_vbus: usb2vbusgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19>; /* SODIMM 185 */
+ };
+
+ /* On-module Wi-Fi */
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190>,
+ <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0>,
+ <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0>,
+ <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0>,
+ <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0>,
+ <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0>;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194>,
+ <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4>;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196>,
+ <MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6>,
+ <MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6>,
+ <MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6>,
+ <MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6>,
+ <MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6>;
+ };
+
+ pinctrl_usdhc2_cd: usdhc2cdgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4>; /* SODIMM 84 */
+ };
+
+ pinctrl_usdhc2_cd_sleep: usdhc2cdslpgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0>; /* SODIMM 84 */
+ };
+
+ pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x4>; /* SODIMM 76 */
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>, /* PMIC_USDHC_VSELECT */
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190>, /* SODIMM 78 */
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0>, /* SODIMM 74 */
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0>, /* SODIMM 80 */
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0>, /* SODIMM 82 */
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0>, /* SODIMM 70 */
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0>; /* SODIMM 72 */
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>,
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x4>,
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6>;
+ };
+
+ /* Avoid backfeeding with removed card power */
+ pinctrl_usdhc2_sleep: usdhc2slpgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x0>,
+ <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x100>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x100>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x100>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x100>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x100>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x100>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0>,
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0>;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO09__USDHC3_RESET_B 0x1d1>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2>,
+ <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6>; /* PMIC_WDI */
+ };
+
+ pinctrl_bluetooth_ctrl: bluetoothctrlgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08 0x1c4>; /* WIFI_WKUP_BT */
+ };
+
+ pinctrl_wifi_ctrl: wifictrlgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09 0x1c4>; /* WIFI_WKUP_WLAN */
+ };
+
+ pinctrl_wifi_i2s: wifii2sgrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x1d6>, /* WIFI_TX_SYNC */
+ <MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x96>, /* WIFI_RX_DATA0 */
+ <MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x1d6>, /* WIFI_TX_BCLK */
+ <MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x1d6>; /* WIFI_TX_DATA0 */
+ };
+
+ pinctrl_wifi_pwr_en: wifipwrengrp {
+ fsl,pins =
+ <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x184>; /* PMIC_EN_WIFI */
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 794d75173cf5..d9542dfff83f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -4,6 +4,7 @@
*/
#include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/power/imx8mp-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -58,6 +59,9 @@
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
+ operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
@@ -75,6 +79,7 @@
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
@@ -92,6 +97,7 @@
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
@@ -109,6 +115,7 @@
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
+ operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
@@ -121,6 +128,35 @@
};
};
+ a53_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <850000>;
+ opp-supported-hw = <0x8a0>, <0x7>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <950000>;
+ opp-supported-hw = <0xa0>, <0x7>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1000000>;
+ opp-supported-hw = <0x20>, <0x3>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
osc_32k: clock-osc-32k {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -475,6 +511,94 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
+
+ gpc: gpc@303a0000 {
+ compatible = "fsl,imx8mp-gpc";
+ reg = <0x303a0000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ pgc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pgc_mipi_phy1: power-domain@0 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY1>;
+ };
+
+ pgc_pcie_phy: power-domain@1 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
+ };
+
+ pgc_usb1_phy: power-domain@2 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
+ };
+
+ pgc_usb2_phy: power-domain@3 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
+ };
+
+ pgc_gpu2d: power-domain@6 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_GPU2D>;
+ clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>;
+ power-domains = <&pgc_gpumix>;
+ };
+
+ pgc_gpumix: power-domain@7 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_GPUMIX>;
+ clocks = <&clk IMX8MP_CLK_GPU_ROOT>,
+ <&clk IMX8MP_CLK_GPU_AHB>;
+ assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>,
+ <&clk IMX8MP_CLK_GPU_AHB>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>, <400000000>;
+ };
+
+ pgc_gpu3d: power-domain@9 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_GPU3D>;
+ clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+ <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+ power-domains = <&pgc_gpumix>;
+ };
+
+ pgc_mediamix: power-domain@10 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+ };
+
+ pgc_mipi_phy2: power-domain@16 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
+ };
+
+ pgc_hsiomix: power-domains@17 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
+ clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+ <&clk IMX8MP_CLK_HSIO_ROOT>;
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ };
+
+ pgc_ispdwp: power-domain@18 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>;
+ };
+ };
+ };
};
aips2: bus@30400000 {
@@ -491,7 +615,7 @@
clocks = <&clk IMX8MP_CLK_PWM1_ROOT>,
<&clk IMX8MP_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -502,7 +626,7 @@
clocks = <&clk IMX8MP_CLK_PWM2_ROOT>,
<&clk IMX8MP_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -513,7 +637,7 @@
clocks = <&clk IMX8MP_CLK_PWM3_ROOT>,
<&clk IMX8MP_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -524,7 +648,7 @@
clocks = <&clk IMX8MP_CLK_PWM4_ROOT>,
<&clk IMX8MP_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -617,6 +741,8 @@
clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
<&clk IMX8MP_CLK_UART2_ROOT>;
clock-names = "ipg", "per";
+ dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
+ dma-names = "rx", "tx";
status = "disabled";
};
@@ -769,7 +895,7 @@
};
usdhc1: mmc@30b40000 {
- compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b40000 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -783,7 +909,7 @@
};
usdhc2: mmc@30b50000 {
- compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b50000 0x10000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -797,7 +923,7 @@
};
usdhc3: mmc@30b60000 {
- compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
+ compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
reg = <0x30b60000 0x10000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_DUMMY>,
@@ -892,6 +1018,97 @@
};
};
+ aips4: bus@32c00000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ reg = <0x32c00000 0x400000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ media_blk_ctrl: blk-ctrl@32ec0000 {
+ compatible = "fsl,imx8mp-media-blk-ctrl",
+ "syscon";
+ reg = <0x32ec0000 0x10000>;
+ power-domains = <&pgc_mediamix>,
+ <&pgc_mipi_phy1>,
+ <&pgc_mipi_phy1>,
+ <&pgc_mediamix>,
+ <&pgc_mediamix>,
+ <&pgc_mipi_phy2>,
+ <&pgc_mediamix>,
+ <&pgc_ispdwp>,
+ <&pgc_ispdwp>,
+ <&pgc_mipi_phy2>;
+ power-domain-names = "bus", "mipi-dsi1", "mipi-csi1",
+ "lcdif1", "isi", "mipi-csi2",
+ "lcdif2", "isp", "dwe",
+ "mipi-dsi2";
+ clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
+ <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>;
+ clock-names = "apb", "axi", "cam1", "cam2",
+ "disp1", "disp2", "isp", "phy";
+
+ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
+ <&clk IMX8MP_CLK_MEDIA_APB>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <500000000>, <200000000>;
+
+ #power-domain-cells = <1>;
+ };
+
+ hsio_blk_ctrl: blk-ctrl@32f10000 {
+ compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
+ reg = <0x32f10000 0x24>;
+ clocks = <&clk IMX8MP_CLK_USB_ROOT>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>;
+ clock-names = "usb", "pcie";
+ power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
+ <&pgc_usb1_phy>, <&pgc_usb2_phy>,
+ <&pgc_hsiomix>, <&pgc_pcie_phy>;
+ power-domain-names = "bus", "usb", "usb-phy1",
+ "usb-phy2", "pcie", "pcie-phy";
+ #power-domain-cells = <1>;
+ };
+ };
+
+ gpu3d: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>,
+ <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>,
+ <&clk IMX8MP_CLK_GPU_ROOT>,
+ <&clk IMX8MP_CLK_GPU_AHB>;
+ clock-names = "core", "shader", "bus", "reg";
+ assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>,
+ <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>,
+ <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>, <800000000>;
+ power-domains = <&pgc_gpu3d>;
+ };
+
+ gpu2d: gpu@38008000 {
+ compatible = "vivante,gc";
+ reg = <0x38008000 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>,
+ <&clk IMX8MP_CLK_GPU_ROOT>,
+ <&clk IMX8MP_CLK_GPU_AHB>;
+ clock-names = "core", "bus", "reg";
+ assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>;
+ power-domains = <&pgc_gpu2d>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
@@ -902,6 +1119,12 @@
interrupt-parent = <&gic>;
};
+ edacmc: memory-controller@3d400000 {
+ compatible = "snps,ddrc-3.80a";
+ reg = <0x3d400000 0x400000>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
ddr-pmu@3d800000 {
compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
reg = <0x3d800000 0x400000>;
@@ -915,6 +1138,7 @@
clock-names = "phy";
assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
#phy-cells = <0>;
status = "disabled";
};
@@ -927,6 +1151,7 @@
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -940,9 +1165,6 @@
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "bus_early", "ref", "suspend";
- assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
- assigned-clock-rates = <500000000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
@@ -958,6 +1180,7 @@
clock-names = "phy";
assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
#phy-cells = <0>;
status = "disabled";
};
@@ -970,6 +1193,7 @@
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
@@ -983,9 +1207,6 @@
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
clock-names = "bus_early", "ref", "suspend";
- assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
- assigned-clock-rates = <500000000>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index 564746d5000d..a91c136797f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -311,7 +311,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 622f3787a186..b86f188a440d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -18,7 +18,7 @@
backlight_dsi: backlight-dsi {
compatible = "pwm-backlight";
/* 200 Hz for the PAM2841 */
- pwms = <&pwm1 0 5000000>;
+ pwms = <&pwm1 0 5000000 0>;
brightness-levels = <0 100>;
num-interpolated-steps = <100>;
/* Default brightness level (index into the array defined by */
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
index 30d65bef6939..1056b7981bdb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
@@ -18,6 +18,10 @@
led-max-microamp = <25000>;
};
+&lcd_panel {
+ compatible = "ys,ys57pss36bh5gq";
+};
+
&proximity {
proximity-near-level = <10>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 05c16376b4d8..587e55aaa57b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -42,6 +42,7 @@
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <50>;
+ wakeup-source;
};
vol-up {
@@ -49,6 +50,7 @@
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <50>;
+ wakeup-source;
};
};
@@ -323,15 +325,10 @@
};
partition@30000 {
- label = "protected1";
- reg = <0x30000 0x10000>;
+ label = "firmware";
+ reg = <0x30000 0x1d0000>;
read-only;
};
-
- partition@40000 {
- label = "rw";
- reg = <0x40000 0x1C0000>;
- };
};
};
@@ -387,8 +384,6 @@
fsl,pins = <
/* CHRG_INT */
MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80
- /* CHG_STATUS_B */
- MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
>;
};
@@ -1098,7 +1093,7 @@
ti,precharge-current = <130000>; /* uA */
ti,minimum-sys-voltage = <3700000>; /* uV */
ti,boost-voltage = <5000000>; /* uV */
- ti,boost-max-current = <500000>; /* uA */
+ ti,boost-max-current = <1500000>; /* uA */
ti,use-vinmin-threshold = <1>; /* enable VINDPM */
ti,vinmin-threshold = <3900000>; /* uV */
monitored-battery = <&bat>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index 94a13cb500e6..8956a46788fa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -18,7 +18,7 @@
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
- pwms = <&pwm2 0 10000>;
+ pwms = <&pwm2 0 10000 0>;
power-supply = <&reg_main_usb>;
enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 32 64 128 160 200 255>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 5b3e849f554d..49eadb081b19 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -63,6 +63,13 @@
clock-output-names = "osc_27m";
};
+ hdmi_phy_27m: clock-hdmi-phy-27m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names = "hdmi_phy_27m";
+ };
+
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -791,7 +798,7 @@
clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
<&clk IMX8MQ_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -802,7 +809,7 @@
clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
<&clk IMX8MQ_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -813,7 +820,7 @@
clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
<&clk IMX8MQ_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
@@ -824,7 +831,7 @@
clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
<&clk IMX8MQ_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 863232a47004..07d8dd8160f6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -135,6 +135,14 @@
status = "okay";
};
+&mu_m0 {
+ status = "okay";
+};
+
+&mu1_m0 {
+ status = "okay";
+};
+
&scu_key {
status = "okay";
};
@@ -196,6 +204,23 @@
status = "okay";
};
+&vpu {
+ compatible = "nxp,imx8qxp-vpu";
+ status = "okay";
+};
+
+&vpu_core0 {
+ reg = <0x2d040000 0x10000>;
+ memory-region = <&decoder_boot>, <&decoder_rpc>;
+ status = "okay";
+};
+
+&vpu_core1 {
+ reg = <0x2d050000 0x10000>;
+ memory-region = <&encoder_boot>, <&encoder_rpc>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index dbec7c106e0b..a79ae33cbad2 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -46,6 +46,9 @@
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
+ vpu_core0 = &vpu_core0;
+ vpu_core1 = &vpu_core1;
+ vpu_core2 = &vpu_core2;
};
cpus {
@@ -162,10 +165,30 @@
#size-cells = <2>;
ranges;
+ decoder_boot: decoder-boot@84000000 {
+ reg = <0 0x84000000 0 0x2000000>;
+ no-map;
+ };
+
+ encoder_boot: encoder-boot@86000000 {
+ reg = <0 0x86000000 0 0x200000>;
+ no-map;
+ };
+
+ decoder_rpc: decoder-rpc@92000000 {
+ reg = <0 0x92000000 0 0x100000>;
+ no-map;
+ };
+
dsp_reserved: dsp@92400000 {
reg = <0 0x92400000 0 0x2000000>;
no-map;
};
+
+ encoder_rpc: encoder-rpc@94400000 {
+ reg = <0 0x94400000 0 0x700000>;
+ no-map;
+ };
};
pmu {
@@ -287,6 +310,7 @@
/* sorted in register address */
#include "imx8-ss-img.dtsi"
+ #include "imx8-ss-vpu.dtsi"
#include "imx8-ss-adma.dtsi"
#include "imx8-ss-conn.dtsi"
#include "imx8-ss-ddr.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 8bd6d7e8a474..6b3057a09251 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1045,8 +1045,8 @@
clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
clock-names = "ref_clk", "phy_clk";
- freq-table-hz = <0 0
- 0 0>;
+ freq-table-hz = <0 0>,
+ <0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 636c8817df7e..3125c3869c69 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -671,8 +671,8 @@
clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
clock-names = "ref_clk", "phy_clk";
- freq-table-hz = <0 0
- 0 0>;
+ freq-table-hz = <0 0>,
+ <0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index c78371703e76..caccb0334ada 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -350,8 +350,6 @@
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
reset-names = "dma", "dma-ocp";
clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3e5789f37206..bd4e61d5448e 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -164,7 +164,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <108000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
index c5eb3604dd5b..070725b81be5 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
@@ -71,10 +71,6 @@
&spi0 {
flash@0 {
- spi-max-frequency = <108000000>;
- spi-rx-bus-width = <4>;
- spi-tx-bus-width = <4>;
-
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -112,18 +108,21 @@
&usb3 {
usb-phy = <&usb3_phy>;
- status = "disabled";
};
&mdio {
extphy: ethernet-phy@1 {
reg = <1>;
+
+ reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
};
};
&switch0 {
reg = <3>;
+ reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
+
ports {
switch0port1: port@1 {
reg = <1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 98c9a3265446..caf9c8529fca 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -211,7 +211,7 @@
assigned-clock-parents = <&tbg 1>;
assigned-clock-rates = <20000000>;
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index 95d46e8d081c..a35317d24d6c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -99,7 +99,7 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_quad_pins>;
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <54000000>;
@@ -108,10 +108,15 @@
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
- /* only bootloader is located on the SPI */
+
partition@0 {
- label = "uboot";
- reg = <0 0x400000>;
+ label = "firmware";
+ reg = <0x0 0x180000>;
+ };
+
+ partition@180000 {
+ label = "u-boot-env";
+ reg = <0x180000 0x10000>;
};
};
};
@@ -148,15 +153,15 @@
scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
- lm75@48 {
+ nct375@48 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x48>;
};
- lm75@49 {
+ nct375@49 {
status = "okay";
- compatible = "lm75";
+ compatible = "ti,tmp75c";
reg = <0x49>;
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 8c8bb97c9d30..df152c72276b 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -444,7 +444,7 @@
#mbox-cells = <1>;
};
- sdhci1: sdhci@d0000 {
+ sdhci1: mmc@d0000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
reg = <0xd0000 0x300>,
@@ -455,7 +455,7 @@
status = "disabled";
};
- sdhci0: sdhci@d8000 {
+ sdhci0: mmc@d8000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
reg = <0xd8000 0x300>,
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index cd326fe224ce..5e5baf6beea4 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -83,7 +83,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -186,7 +186,7 @@
&cp0_spi1 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index f3b0d57a24a3..39a8e5e99d79 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -155,7 +155,7 @@
pinctrl-names = "default";
pinctrl-0 = <&cp0_spi1_pins>;
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 8729c6467303..871f84b4a6ed 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -589,7 +589,7 @@
pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "st,w25q32";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index f2e8e0df8865..92897bd7e6cf 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -72,7 +72,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
@@ -238,7 +238,7 @@
&cp1_spi1 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <20000000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index adbfecc678b5..779cf167c33e 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -360,7 +360,7 @@
pinctrl-0 = <&cp1_spi1_pins>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "st,w25q32";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index dac85fa748de..74bed79e4f5e 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -185,7 +185,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 6614472100c2..a06a0a889c43 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -250,7 +250,7 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
};
- ap_sdhci0: sdhci@6e0000 {
+ ap_sdhci0: mmc@6e0000 {
compatible = "marvell,armada-ap806-sdhci";
reg = <0x6e0000 0x300>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index 3bd2182817fb..d6c0990a267d 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -493,7 +493,7 @@
status = "okay";
};
- CP11X_LABEL(sdhci0): sdhci@780000 {
+ CP11X_LABEL(sdhci0): mmc@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index d9f9f2c19740..1acd746284dc 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -175,7 +175,7 @@
<0x2000000 0x1000000>; /* CS0 */
status = "okay";
- spi-flash@0 {
+ flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index c00b69b88bd2..7e20987253a3 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -310,7 +310,7 @@
pinctrl-0 = <&cp0_spi0_pins>;
reg = <0x700680 0x50>;
- spi-flash@0 {
+ flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index f995b1bcda01..b7fc241a228c 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -137,7 +137,7 @@
pinctrl-0 = <&cp1_spi0_pins>;
reg = <0x700680 0x50>;
- spi-flash@0 {
+ flash@0 {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 8c1e18032f9f..c7d4636a2cb7 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -38,4 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index a27b7628c5f7..623eb3beabf2 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -19,7 +19,7 @@
#address-cells = <2>;
#size-cells = <2>;
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -36,7 +36,7 @@
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
@@ -329,8 +329,8 @@
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
- mediatek,larbs = <&larb0 &larb1 &larb2
- &larb3 &larb6>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+ <&larb3>, <&larb6>;
#iommu-cells = <1>;
};
@@ -346,7 +346,7 @@
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
- mediatek,larbs = <&larb4 &larb5 &larb7>;
+ mediatek,larbs = <&larb4>, <&larb5>, <&larb7>;
#iommu-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
new file mode 100644
index 000000000000..df3e822232d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
@@ -0,0 +1,298 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+
+&pwrap {
+ pmic: pmic {
+ compatible = "mediatek,mt6359";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ mt6359codec: mt6359codec {
+ };
+
+ regulators {
+ mt6359_vs1_buck_reg: buck_vs1 {
+ regulator-name = "vs1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+ mt6359_vgpu11_buck_reg: buck_vgpu11 {
+ regulator-name = "vgpu11";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-ramp-delay = <5000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ mt6359_vmodem_buck_reg: buck_vmodem {
+ regulator-name = "vmodem";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-ramp-delay = <10760>;
+ regulator-enable-ramp-delay = <200>;
+ };
+ mt6359_vpu_buck_reg: buck_vpu {
+ regulator-name = "vpu";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-ramp-delay = <5000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ mt6359_vcore_buck_reg: buck_vcore {
+ regulator-name = "vcore";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <5000>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ mt6359_vs2_buck_reg: buck_vs2 {
+ regulator-name = "vs2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-enable-ramp-delay = <0>;
+ regulator-always-on;
+ };
+ mt6359_vpa_buck_reg: buck_vpa {
+ regulator-name = "vpa";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <3650000>;
+ regulator-enable-ramp-delay = <300>;
+ };
+ mt6359_vproc2_buck_reg: buck_vproc2 {
+ regulator-name = "vproc2";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-ramp-delay = <7500>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ mt6359_vproc1_buck_reg: buck_vproc1 {
+ regulator-name = "vproc1";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ regulator-ramp-delay = <7500>;
+ regulator-enable-ramp-delay = <200>;
+ regulator-allowed-modes = <0 1 2>;
+ };
+ mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
+ regulator-name = "vcore_sshub";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ };
+ mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
+ regulator-name = "vgpu11_sshub";
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1193750>;
+ };
+ mt6359_vaud18_ldo_reg: ldo_vaud18 {
+ regulator-name = "vaud18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+ mt6359_vsim1_ldo_reg: ldo_vsim1 {
+ regulator-name = "vsim1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ };
+ mt6359_vibr_ldo_reg: ldo_vibr {
+ regulator-name = "vibr";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ mt6359_vrf12_ldo_reg: ldo_vrf12 {
+ regulator-name = "vrf12";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ mt6359_vusb_ldo_reg: ldo_vusb {
+ regulator-name = "vusb";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-enable-ramp-delay = <960>;
+ regulator-always-on;
+ };
+ mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
+ regulator-name = "vsram_proc2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <7500>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+ mt6359_vio18_ldo_reg: ldo_vio18 {
+ regulator-name = "vio18";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-enable-ramp-delay = <960>;
+ regulator-always-on;
+ };
+ mt6359_vcamio_ldo_reg: ldo_vcamio {
+ regulator-name = "vcamio";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ mt6359_vcn18_ldo_reg: ldo_vcn18 {
+ regulator-name = "vcn18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+ mt6359_vfe28_ldo_reg: ldo_vfe28 {
+ regulator-name = "vfe28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <120>;
+ };
+ mt6359_vcn13_ldo_reg: ldo_vcn13 {
+ regulator-name = "vcn13";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
+ regulator-name = "vcn33_1_bt";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3500000>;
+ };
+ mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
+ regulator-name = "vcn33_1_wifi";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3500000>;
+ };
+ mt6359_vaux18_ldo_reg: ldo_vaux18 {
+ regulator-name = "vaux18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+ mt6359_vsram_others_ldo_reg: ldo_vsram_others {
+ regulator-name = "vsram_others";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <5000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+ mt6359_vefuse_ldo_reg: ldo_vefuse {
+ regulator-name = "vefuse";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+ mt6359_vxo22_ldo_reg: ldo_vxo22 {
+ regulator-name = "vxo22";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+ mt6359_vrfck_ldo_reg: ldo_vrfck {
+ regulator-name = "vrfck";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1700000>;
+ };
+ mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
+ regulator-name = "vrfck";
+ regulator-min-microvolt = <1240000>;
+ regulator-max-microvolt = <1600000>;
+ };
+ mt6359_vbif28_ldo_reg: ldo_vbif28 {
+ regulator-name = "vbif28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-enable-ramp-delay = <240>;
+ };
+ mt6359_vio28_ldo_reg: ldo_vio28 {
+ regulator-name = "vio28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ mt6359_vemc_ldo_reg: ldo_vemc {
+ regulator-name = "vemc";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
+ regulator-name = "vemc";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
+ regulator-name = "vcn33_2_bt";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3500000>;
+ };
+ mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
+ regulator-name = "vcn33_2_wifi";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3500000>;
+ };
+ mt6359_va12_ldo_reg: ldo_va12 {
+ regulator-name = "va12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+ mt6359_va09_ldo_reg: ldo_va09 {
+ regulator-name = "va09";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ mt6359_vrf18_ldo_reg: ldo_vrf18 {
+ regulator-name = "vrf18";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1810000>;
+ };
+ mt6359_vsram_md_ldo_reg: ldo_vsram_md {
+ regulator-name = "vsram_md";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <10760>;
+ regulator-enable-ramp-delay = <240>;
+ };
+ mt6359_vufs_ldo_reg: ldo_vufs {
+ regulator-name = "vufs";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ mt6359_vm18_ldo_reg: ldo_vm18 {
+ regulator-name = "vm18";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-always-on;
+ };
+ mt6359_vbbck_ldo_reg: ldo_vbbck {
+ regulator-name = "vbbck";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
+ regulator-name = "vsram_proc1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ regulator-ramp-delay = <7500>;
+ regulator-enable-ramp-delay = <240>;
+ regulator-always-on;
+ };
+ mt6359_vsim2_ldo_reg: ldo_vsim2 {
+ regulator-name = "vsim2";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <3100000>;
+ };
+ mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
+ regulator-name = "vsram_others_sshub";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1293750>;
+ };
+ };
+
+ mt6359rtc: mt6359rtc {
+ compatible = "mediatek,mt6358-rtc";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index f232f8baf4e8..dbcee8b4d8d8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -80,6 +80,7 @@
enable-method = "psci";
clock-frequency = <1300000000>;
cci-control-port = <&cci_control2>;
+ next-level-cache = <&L2>;
};
cpu1: cpu@1 {
@@ -94,6 +95,12 @@
enable-method = "psci";
clock-frequency = <1300000000>;
cci-control-port = <&cci_control2>;
+ next-level-cache = <&L2>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
};
};
@@ -545,6 +552,18 @@
status = "disabled";
};
+ snfi: spi@1100d000 {
+ compatible = "mediatek,mt7622-snand";
+ reg = <0 0x1100d000 0 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "pad_clk";
+ nand-ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
bch: ecc@1100e000 {
compatible = "mediatek,mt7622-ecc";
reg = <0 0x1100e000 0 0x1000>;
@@ -922,6 +941,7 @@
clock-names = "hsdma";
power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
#dma-cells = <1>;
+ dma-requests = <3>;
};
pcie_mirror: pcie-mirror@10000400 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8167.dtsi b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
index 9029051624a6..54655f2feb04 100644
--- a/arch/arm64/boot/dts/mediatek/mt8167.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8167.dtsi
@@ -174,7 +174,7 @@
iommu: m4u@10203000 {
compatible = "mediatek,mt8167-m4u";
reg = <0 0x10203000 0 0x1000>;
- mediatek,larbs = <&larb0 &larb1 &larb2>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>;
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_LOW>;
#iommu-cells = <1>;
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 2b7d331a4588..40d7b47fc52e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -57,7 +57,7 @@
serial3 = &uart3;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-507000000 {
@@ -94,7 +94,7 @@
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-507000000 {
@@ -273,7 +273,7 @@
};
thermal-zones {
- cpu_thermal: cpu_thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>; /* milliseconds */
polling-delay = <1000>; /* milliseconds */
@@ -588,8 +588,8 @@
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
- mediatek,larbs = <&larb0 &larb1 &larb2
- &larb3 &larb4 &larb5>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+ <&larb3>, <&larb4>, <&larb5>;
#iommu-cells = <1>;
};
@@ -1010,7 +1010,6 @@
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,vpu = <&vpu>;
};
@@ -1021,7 +1020,6 @@
<&mmsys CLK_MM_MUTEX_32K>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_RDMA1>;
- mediatek,larb = <&larb4>;
};
mdp_rsz0: rsz@14003000 {
@@ -1051,7 +1049,6 @@
clocks = <&mmsys CLK_MM_MDP_WDMA>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WDMA>;
- mediatek,larb = <&larb0>;
};
mdp_wrot0: wrot@14007000 {
@@ -1060,7 +1057,6 @@
clocks = <&mmsys CLK_MM_MDP_WROT0>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT0>;
- mediatek,larb = <&larb0>;
};
mdp_wrot1: wrot@14008000 {
@@ -1069,7 +1065,6 @@
clocks = <&mmsys CLK_MM_MDP_WROT1>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
iommus = <&iommu M4U_PORT_MDP_WROT1>;
- mediatek,larb = <&larb4>;
};
ovl0: ovl@1400c000 {
@@ -1079,7 +1074,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
@@ -1090,7 +1084,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_OVL1>;
iommus = <&iommu M4U_PORT_DISP_OVL1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
};
@@ -1101,7 +1094,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
};
@@ -1112,7 +1104,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
};
@@ -1123,7 +1114,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_RDMA2>;
iommus = <&iommu M4U_PORT_DISP_RDMA2>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
};
@@ -1134,7 +1124,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA0>;
iommus = <&iommu M4U_PORT_DISP_WDMA0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
};
@@ -1145,7 +1134,6 @@
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_DISP_WDMA1>;
iommus = <&iommu M4U_PORT_DISP_WDMA1>;
- mediatek,larb = <&larb4>;
mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
};
@@ -1290,6 +1278,7 @@
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_MUTEX_32K>;
+ mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0 0x1000>;
mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
<CMDQ_EVENT_MUTEX1_STREAM_EOF>;
};
@@ -1399,7 +1388,6 @@
<0 0x16027800 0 0x800>, /* VDEC_HWB */
<0 0x16028400 0 0x400>; /* VDEC_HWG */
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb1>;
iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
<&iommu M4U_PORT_HW_VDEC_PP_EXT>,
<&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
@@ -1467,7 +1455,6 @@
compatible = "mediatek,mt8173-vcodec-enc";
reg = <0 0x18002000 0 0x1000>; /* VENC_SYS */
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_VENC_RCPU>,
<&iommu M4U_PORT_VENC_REC>,
<&iommu M4U_PORT_VENC_BSDMA>,
@@ -1484,6 +1471,7 @@
clock-names = "venc_sel";
assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
};
jpegdec: jpegdec@18004000 {
@@ -1495,7 +1483,6 @@
clock-names = "jpgdec-smi",
"jpgdec";
power-domains = <&spm MT8173_POWER_DOMAIN_VENC>;
- mediatek,larb = <&larb3>;
iommus = <&iommu M4U_PORT_JPGDEC_WDMA>,
<&iommu M4U_PORT_JPGDEC_BSDMA>;
};
@@ -1529,13 +1516,13 @@
<&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
<&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
<&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
- mediatek,larb = <&larb5>;
mediatek,vpu = <&vpu>;
clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
clock-names = "venc_lt_sel";
assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
assigned-clock-parents =
<&topckgen CLK_TOP_VCODECPLL_370P5>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC_LT>;
};
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 8f7bf33f607d..2d7a193272ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -92,7 +92,7 @@
};
&cros_ec {
- cros_ec_pwm: ec-pwm {
+ cros_ec_pwm: pwm {
compatible = "google,cros-ec-pwm";
#pwm-cells = <1>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 0f9480f91261..8d5bf73a9099 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -849,7 +849,7 @@
mediatek,pad-select = <0>;
status = "okay";
- w25q64dw: spi-flash@0 {
+ w25q64dw: flash@0 {
compatible = "winbond,w25q64dw", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index ee912825cfc6..afeb5cd37826 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -55,7 +55,7 @@
};
};
- ntc {
+ thermistor {
compatible = "murata,ncp03wf104";
pullup-uv = <1800000>;
pullup-ohm = <390000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 4b08691ed39e..01e650251928 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -197,7 +197,7 @@
};
};
- gpu_opp_table: opp_table0 {
+ gpu_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -682,8 +682,8 @@
compatible = "mediatek,mt8183-m4u";
reg = <0 0x10205000 0 0x1000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larbs = <&larb0 &larb1 &larb2 &larb3
- &larb4 &larb5 &larb6>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>,
+ <&larb4>, <&larb5>, <&larb6>;
#iommu-cells = <1>;
};
@@ -823,7 +823,7 @@
};
thermal_zones: thermal-zones {
- cpu_thermal: cpu_thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <100>;
polling-delay = <500>;
thermal-sensors = <&thermal 0>;
@@ -1396,7 +1396,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0>;
iommus = <&iommu M4U_PORT_DISP_OVL0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
};
@@ -1407,7 +1406,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
};
@@ -1418,7 +1416,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
- mediatek,larb = <&larb0>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
};
@@ -1429,7 +1426,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA0>;
iommus = <&iommu M4U_PORT_DISP_RDMA0>;
- mediatek,larb = <&larb0>;
mediatek,rdma-fifo-size = <5120>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
};
@@ -1441,7 +1437,6 @@
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_DISP_RDMA1>;
iommus = <&iommu M4U_PORT_DISP_RDMA1>;
- mediatek,larb = <&larb0>;
mediatek,rdma-fifo-size = <2048>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
};
@@ -1466,8 +1461,7 @@
};
aal0: aal@14010000 {
- compatible = "mediatek,mt8183-disp-aal",
- "mediatek,mt8173-disp-aal";
+ compatible = "mediatek,mt8183-disp-aal";
reg = <0 0x14010000 0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
@@ -1598,7 +1592,6 @@
compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
reg = <0 0x17030000 0 0x1000>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
- mediatek,larb = <&larb4>;
iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
<&iommu M4U_PORT_JPGENC_BSDMA>;
power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
index 0205837fa698..808be492e970 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-evb.dts
@@ -5,6 +5,7 @@
*/
/dts-v1/;
#include "mt8192.dtsi"
+#include "mt6359.dtsi"
/ {
model = "MediaTek MT8192 evaluation board";
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 411feb294613..733aec2e7f77 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -8,7 +8,9 @@
#include <dt-bindings/clock/mt8192-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8192-larb-port.h>
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/phy/phy.h>
#include <dt-bindings/power/mt8192-power.h>
/ {
@@ -523,6 +525,33 @@
clock-names = "clk13m";
};
+ pwrap: pwrap@10026000 {
+ compatible = "mediatek,mt6873-pwrap";
+ reg = <0 0x10026000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+ <&infracfg CLK_INFRA_PMIC_TMR>;
+ clock-names = "spi", "wrap";
+ assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+ };
+
+ spmi: spmi@10027000 {
+ compatible = "mediatek,mt6873-spmi";
+ reg = <0 0x10027000 0 0x000e00>,
+ <0 0x10029000 0 0x000100>;
+ reg-names = "pmif", "spmimst";
+ clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+ <&infracfg CLK_INFRA_PMIC_TMR>,
+ <&topckgen CLK_TOP_SPMI_MST_SEL>;
+ clock-names = "pmif_sys_ck",
+ "pmif_tmr_ck",
+ "spmimst_clk_mux";
+ assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+ };
+
scp_adsp: clock-controller@10720000 {
compatible = "mediatek,mt8192-scp_adsp";
reg = <0 0x10720000 0 0x1000>;
@@ -667,6 +696,205 @@
status = "disabled";
};
+ scp: scp@10500000 {
+ compatible = "mediatek,mt8192-scp";
+ reg = <0 0x10500000 0 0x100000>,
+ <0 0x10720000 0 0xe0000>,
+ <0 0x10700000 0 0x8000>;
+ reg-names = "sram", "cfg", "l1tcm";
+ interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg CLK_INFRA_SCPSYS>;
+ clock-names = "main";
+ status = "disabled";
+ };
+
+ xhci: usb@11200000 {
+ compatible = "mediatek,mt8192-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts-extended = <&gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "host";
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP_SEL>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&infracfg CLK_INFRA_SSUSB>,
+ <&infracfg CLK_INFRA_SSUSB_XHCI>,
+ <&apmixedsys CLK_APMIXED_USBPLL>;
+ clock-names = "sys_ck", "xhci_ck", "ref_ck";
+ wakeup-source;
+ mediatek,syscon-wakeup = <&pericfg 0x420 102>;
+ status = "disabled";
+ };
+
+ audsys: syscon@11210000 {
+ compatible = "mediatek,mt8192-audsys", "syscon";
+ reg = <0 0x11210000 0 0x2000>;
+ #clock-cells = <1>;
+
+ afe: mt8192-afe-pcm {
+ compatible = "mediatek,mt8192-audio";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH 0>;
+ resets = <&watchdog 17>;
+ reset-names = "audiosys";
+ mediatek,apmixedsys = <&apmixedsys>;
+ mediatek,infracfg = <&infracfg>;
+ mediatek,topckgen = <&topckgen>;
+ power-domains = <&spm MT8192_POWER_DOMAIN_AUDIO>;
+ clocks = <&audsys CLK_AUD_AFE>,
+ <&audsys CLK_AUD_DAC>,
+ <&audsys CLK_AUD_DAC_PREDIS>,
+ <&audsys CLK_AUD_ADC>,
+ <&audsys CLK_AUD_ADDA6_ADC>,
+ <&audsys CLK_AUD_22M>,
+ <&audsys CLK_AUD_24M>,
+ <&audsys CLK_AUD_APLL_TUNER>,
+ <&audsys CLK_AUD_APLL2_TUNER>,
+ <&audsys CLK_AUD_TDM>,
+ <&audsys CLK_AUD_TML>,
+ <&audsys CLK_AUD_NLE>,
+ <&audsys CLK_AUD_DAC_HIRES>,
+ <&audsys CLK_AUD_ADC_HIRES>,
+ <&audsys CLK_AUD_ADC_HIRES_TML>,
+ <&audsys CLK_AUD_ADDA6_ADC_HIRES>,
+ <&audsys CLK_AUD_3RD_DAC>,
+ <&audsys CLK_AUD_3RD_DAC_PREDIS>,
+ <&audsys CLK_AUD_3RD_DAC_TML>,
+ <&audsys CLK_AUD_3RD_DAC_HIRES>,
+ <&infracfg CLK_INFRA_AUDIO>,
+ <&infracfg CLK_INFRA_AUDIO_26M_B>,
+ <&topckgen CLK_TOP_AUDIO_SEL>,
+ <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+ <&topckgen CLK_TOP_MAINPLL_D4_D4>,
+ <&topckgen CLK_TOP_AUD_1_SEL>,
+ <&topckgen CLK_TOP_APLL1>,
+ <&topckgen CLK_TOP_AUD_2_SEL>,
+ <&topckgen CLK_TOP_APLL2>,
+ <&topckgen CLK_TOP_AUD_ENGEN1_SEL>,
+ <&topckgen CLK_TOP_APLL1_D4>,
+ <&topckgen CLK_TOP_AUD_ENGEN2_SEL>,
+ <&topckgen CLK_TOP_APLL2_D4>,
+ <&topckgen CLK_TOP_APLL_I2S0_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S1_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S2_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S3_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S4_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S5_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S6_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S7_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S8_M_SEL>,
+ <&topckgen CLK_TOP_APLL_I2S9_M_SEL>,
+ <&topckgen CLK_TOP_APLL12_DIV0>,
+ <&topckgen CLK_TOP_APLL12_DIV1>,
+ <&topckgen CLK_TOP_APLL12_DIV2>,
+ <&topckgen CLK_TOP_APLL12_DIV3>,
+ <&topckgen CLK_TOP_APLL12_DIV4>,
+ <&topckgen CLK_TOP_APLL12_DIVB>,
+ <&topckgen CLK_TOP_APLL12_DIV5>,
+ <&topckgen CLK_TOP_APLL12_DIV6>,
+ <&topckgen CLK_TOP_APLL12_DIV7>,
+ <&topckgen CLK_TOP_APLL12_DIV8>,
+ <&topckgen CLK_TOP_APLL12_DIV9>,
+ <&topckgen CLK_TOP_AUDIO_H_SEL>,
+ <&clk26m>;
+ clock-names = "aud_afe_clk",
+ "aud_dac_clk",
+ "aud_dac_predis_clk",
+ "aud_adc_clk",
+ "aud_adda6_adc_clk",
+ "aud_apll22m_clk",
+ "aud_apll24m_clk",
+ "aud_apll1_tuner_clk",
+ "aud_apll2_tuner_clk",
+ "aud_tdm_clk",
+ "aud_tml_clk",
+ "aud_nle",
+ "aud_dac_hires_clk",
+ "aud_adc_hires_clk",
+ "aud_adc_hires_tml",
+ "aud_adda6_adc_hires_clk",
+ "aud_3rd_dac_clk",
+ "aud_3rd_dac_predis_clk",
+ "aud_3rd_dac_tml",
+ "aud_3rd_dac_hires_clk",
+ "aud_infra_clk",
+ "aud_infra_26m_clk",
+ "top_mux_audio",
+ "top_mux_audio_int",
+ "top_mainpll_d4_d4",
+ "top_mux_aud_1",
+ "top_apll1_ck",
+ "top_mux_aud_2",
+ "top_apll2_ck",
+ "top_mux_aud_eng1",
+ "top_apll1_d4",
+ "top_mux_aud_eng2",
+ "top_apll2_d4",
+ "top_i2s0_m_sel",
+ "top_i2s1_m_sel",
+ "top_i2s2_m_sel",
+ "top_i2s3_m_sel",
+ "top_i2s4_m_sel",
+ "top_i2s5_m_sel",
+ "top_i2s6_m_sel",
+ "top_i2s7_m_sel",
+ "top_i2s8_m_sel",
+ "top_i2s9_m_sel",
+ "top_apll12_div0",
+ "top_apll12_div1",
+ "top_apll12_div2",
+ "top_apll12_div3",
+ "top_apll12_div4",
+ "top_apll12_divb",
+ "top_apll12_div5",
+ "top_apll12_div6",
+ "top_apll12_div7",
+ "top_apll12_div8",
+ "top_apll12_div9",
+ "top_mux_audio_h",
+ "top_clk26m_clk";
+ };
+ };
+
+ pcie: pcie@11230000 {
+ compatible = "mediatek,mt8192-pcie";
+ device_type = "pci";
+ reg = <0 0x11230000 0 0x2000>;
+ reg-names = "pcie-mac";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ clocks = <&infracfg CLK_INFRA_PCIE_PL_P_250M>,
+ <&infracfg CLK_INFRA_PCIE_TL_26M>,
+ <&infracfg CLK_INFRA_PCIE_TL_96M>,
+ <&infracfg CLK_INFRA_PCIE_TL_32K>,
+ <&infracfg CLK_INFRA_PCIE_PERI_26M>,
+ <&infracfg CLK_INFRA_PCIE_TOP_H_133M>;
+ clock-names = "pl_250m", "tl_26m", "tl_96m",
+ "tl_32k", "peri_26m", "top_133m";
+ assigned-clocks = <&topckgen CLK_TOP_TL_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D6_D4>;
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x12000000 0x0 0x12000000 0 0x0800000>,
+ <0x81000000 0 0x12800000 0x0 0x12800000 0 0x0800000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
nor_flash: spi@11234000 {
compatible = "mediatek,mt8192-nor";
reg = <0 0x11234000 0 0xe0>;
@@ -679,13 +907,22 @@
assigned-clock-parents = <&clk26m>;
#address-cells = <1>;
#size-cells = <0>;
- status = "disable";
+ status = "disabled";
};
- audsys: clock-controller@11210000 {
- compatible = "mediatek,mt8192-audsys", "syscon";
- reg = <0 0x11210000 0 0x1000>;
- #clock-cells = <1>;
+ efuse: efuse@11c10000 {
+ compatible = "mediatek,efuse";
+ reg = <0 0x11c10000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ lvts_e_data1: data1@1c0 {
+ reg = <0x1c0 0x58>;
+ };
+
+ svs_calibration: calib@580 {
+ reg = <0x580 0x68>;
+ };
};
i2c3: i2c@11cb0000 {
@@ -824,6 +1061,28 @@
#clock-cells = <1>;
};
+ u3phy0: t-phy@11e40000 {
+ compatible = "mediatek,mt8192-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x11e40000 0x1000>;
+
+ u2port0: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+
+ u3port0: usb-phy@700 {
+ reg = <0x700 0x900>;
+ clocks = <&clk26m>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
i2c0: i2c@11f00000 {
compatible = "mediatek,mt8192-i2c";
reg = <0 0x11f00000 0 0x1000>,
@@ -864,10 +1123,36 @@
#clock-cells = <1>;
};
- msdc: clock-controller@11f60000 {
- compatible = "mediatek,mt8192-msdc";
- reg = <0 0x11f60000 0 0x1000>;
- #clock-cells = <1>;
+ mmc0: mmc@11f60000 {
+ compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11f60000 0 0x1000>, <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+ <&msdc_top CLK_MSDC_TOP_H_MST_0P>,
+ <&msdc_top CLK_MSDC_TOP_SRC_0P>,
+ <&msdc_top CLK_MSDC_TOP_P_CFG>,
+ <&msdc_top CLK_MSDC_TOP_P_MSDC0>,
+ <&msdc_top CLK_MSDC_TOP_AXI>,
+ <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+ clock-names = "source", "hclk", "source_cg", "sys_cg",
+ "pclk_cg", "axi_cg", "ahb_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11f70000 {
+ compatible = "mediatek,mt8192-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11f70000 0 0x1000>, <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+ <&msdc_top CLK_MSDC_TOP_H_MST_1P>,
+ <&msdc_top CLK_MSDC_TOP_SRC_1P>,
+ <&msdc_top CLK_MSDC_TOP_P_CFG>,
+ <&msdc_top CLK_MSDC_TOP_P_MSDC1>,
+ <&msdc_top CLK_MSDC_TOP_AXI>,
+ <&msdc_top CLK_MSDC_TOP_AHB2AXI_BRG_AXI>;
+ clock-names = "source", "hclk", "source_cg", "sys_cg",
+ "pclk_cg", "axi_cg", "ahb_cg";
+ status = "disabled";
};
mfgcfg: clock-controller@13fbf000 {
@@ -882,24 +1167,125 @@
#clock-cells = <1>;
};
+ smi_common: smi@14002000 {
+ compatible = "mediatek,mt8192-smi-common";
+ reg = <0 0x14002000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_INFRA>,
+ <&mmsys CLK_MM_SMI_GALS>,
+ <&mmsys CLK_MM_SMI_GALS>;
+ clock-names = "apb", "smi", "gals0", "gals1";
+ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+ };
+
+ larb0: larb@14003000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x14003000 0 0x1000>;
+ mediatek,larb-id = <0>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+ };
+
+ larb1: larb@14004000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x14004000 0 0x1000>;
+ mediatek,larb-id = <1>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+ };
+
+ dpi0: dpi@14016000 {
+ compatible = "mediatek,mt8192-dpi";
+ reg = <0 0x14016000 0 0x1000>;
+ interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mmsys CLK_MM_DPI_DPI0>,
+ <&mmsys CLK_MM_DISP_DPI0>,
+ <&apmixedsys CLK_APMIXED_TVDPLL>;
+ clock-names = "pixel", "engine", "pll";
+ status = "disabled";
+ };
+
+ iommu0: m4u@1401d000 {
+ compatible = "mediatek,mt8192-m4u";
+ reg = <0 0x1401d000 0 0x1000>;
+ mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+ <&larb4>, <&larb5>, <&larb7>,
+ <&larb9>, <&larb11>, <&larb13>,
+ <&larb14>, <&larb16>, <&larb17>,
+ <&larb18>, <&larb19>, <&larb20>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&mmsys CLK_MM_SMI_IOMMU>;
+ clock-names = "bclk";
+ power-domains = <&spm MT8192_POWER_DOMAIN_DISP>;
+ #iommu-cells = <1>;
+ };
+
imgsys: clock-controller@15020000 {
compatible = "mediatek,mt8192-imgsys";
reg = <0 0x15020000 0 0x1000>;
#clock-cells = <1>;
};
+ larb9: larb@1502e000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1502e000 0 0x1000>;
+ mediatek,larb-id = <9>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_LARB9>,
+ <&imgsys CLK_IMG_LARB9>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_ISP>;
+ };
+
imgsys2: clock-controller@15820000 {
compatible = "mediatek,mt8192-imgsys2";
reg = <0 0x15820000 0 0x1000>;
#clock-cells = <1>;
};
+ larb11: larb@1582e000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1582e000 0 0x1000>;
+ mediatek,larb-id = <11>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys2 CLK_IMG2_LARB11>,
+ <&imgsys2 CLK_IMG2_LARB11>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_ISP2>;
+ };
+
+ larb5: larb@1600d000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1600d000 0 0x1000>;
+ mediatek,larb-id = <5>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+ <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+ };
+
vdecsys_soc: clock-controller@1600f000 {
compatible = "mediatek,mt8192-vdecsys_soc";
reg = <0 0x1600f000 0 0x1000>;
#clock-cells = <1>;
};
+ larb4: larb@1602e000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1602e000 0 0x1000>;
+ mediatek,larb-id = <4>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys CLK_VDEC_SOC_LARB1>,
+ <&vdecsys CLK_VDEC_SOC_LARB1>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+ };
+
vdecsys: clock-controller@1602f000 {
compatible = "mediatek,mt8192-vdecsys";
reg = <0 0x1602f000 0 0x1000>;
@@ -912,12 +1298,101 @@
#clock-cells = <1>;
};
+ larb7: larb@17010000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x17010000 0 0x1000>;
+ mediatek,larb-id = <7>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vencsys CLK_VENC_SET0_LARB>,
+ <&vencsys CLK_VENC_SET1_VENC>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+ };
+
+ vcodec_enc: vcodec@17020000 {
+ compatible = "mediatek,mt8192-vcodec-enc";
+ reg = <0 0x17020000 0 0x2000>;
+ iommus = <&iommu0 M4U_PORT_L7_VENC_RCPU>,
+ <&iommu0 M4U_PORT_L7_VENC_REC>,
+ <&iommu0 M4U_PORT_L7_VENC_BSDMA>,
+ <&iommu0 M4U_PORT_L7_VENC_SV_COMV>,
+ <&iommu0 M4U_PORT_L7_VENC_RD_COMV>,
+ <&iommu0 M4U_PORT_L7_VENC_CUR_LUMA>,
+ <&iommu0 M4U_PORT_L7_VENC_CUR_CHROMA>,
+ <&iommu0 M4U_PORT_L7_VENC_REF_LUMA>,
+ <&iommu0 M4U_PORT_L7_VENC_REF_CHROMA>,
+ <&iommu0 M4U_PORT_L7_VENC_SUB_R_LUMA>,
+ <&iommu0 M4U_PORT_L7_VENC_SUB_W_LUMA>;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>;
+ mediatek,scp = <&scp>;
+ power-domains = <&spm MT8192_POWER_DOMAIN_VENC>;
+ clocks = <&vencsys CLK_VENC_SET1_VENC>;
+ clock-names = "venc-set1";
+ assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D4>;
+ };
+
camsys: clock-controller@1a000000 {
compatible = "mediatek,mt8192-camsys";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
};
+ larb13: larb@1a001000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1a001000 0 0x1000>;
+ mediatek,larb-id = <13>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys CLK_CAM_CAM>,
+ <&camsys CLK_CAM_LARB13>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+ };
+
+ larb14: larb@1a002000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1a002000 0 0x1000>;
+ mediatek,larb-id = <14>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys CLK_CAM_CAM>,
+ <&camsys CLK_CAM_LARB14>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_CAM>;
+ };
+
+ larb16: larb@1a00f000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1a00f000 0 0x1000>;
+ mediatek,larb-id = <16>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys_rawa CLK_CAM_RAWA_CAM>,
+ <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWA>;
+ };
+
+ larb17: larb@1a010000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1a010000 0 0x1000>;
+ mediatek,larb-id = <17>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys_rawb CLK_CAM_RAWB_CAM>,
+ <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWB>;
+ };
+
+ larb18: larb@1a011000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1a011000 0 0x1000>;
+ mediatek,larb-id = <18>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>,
+ <&camsys_rawc CLK_CAM_RAWC_CAM>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_CAM_RAWC>;
+ };
+
camsys_rawa: clock-controller@1a04f000 {
compatible = "mediatek,mt8192-camsys_rawa";
reg = <0 0x1a04f000 0 0x1000>;
@@ -942,10 +1417,43 @@
#clock-cells = <1>;
};
+ larb20: larb@1b00f000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1b00f000 0 0x1000>;
+ mediatek,larb-id = <20>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+ <&ipesys CLK_IPE_LARB20>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+ };
+
+ larb19: larb@1b10f000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1b10f000 0 0x1000>;
+ mediatek,larb-id = <19>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&ipesys CLK_IPE_SMI_SUBCOM>,
+ <&ipesys CLK_IPE_LARB19>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_IPE>;
+ };
+
mdpsys: clock-controller@1f000000 {
compatible = "mediatek,mt8192-mdpsys";
reg = <0 0x1f000000 0 0x1000>;
#clock-cells = <1>;
};
+
+ larb2: larb@1f002000 {
+ compatible = "mediatek,mt8192-smi-larb";
+ reg = <0 0x1f002000 0 0x1000>;
+ mediatek,larb-id = <2>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&mdpsys CLK_MDP_SMI0>,
+ <&mdpsys CLK_MDP_SMI0>;
+ clock-names = "apb", "smi";
+ power-domains = <&spm MT8192_POWER_DOMAIN_MDP>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
new file mode 100644
index 000000000000..4fbd99eb496a
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+/dts-v1/;
+
+#include "mt8195.dtsi"
+#include "mt6359.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+
+/ {
+ model = "MediaTek MT8195 demo board";
+ compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ key-0 {
+ gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+ bl31_secmon_reserved: secmon@54600000 {
+ no-map;
+ reg = <0 0x54600000 0x0 0x30000>;
+ };
+
+ /* 12 MiB reserved for OP-TEE (BL32)
+ * +-----------------------+ 0x43e0_0000
+ * | SHMEM 2MiB |
+ * +-----------------------+ 0x43c0_0000
+ * | | TA_RAM 8MiB |
+ * + TZDRAM +--------------+ 0x4340_0000
+ * | | TEE_RAM 2MiB |
+ * +-----------------------+ 0x4320_0000
+ */
+ optee_reserved: optee@43200000 {
+ no-map;
+ reg = <0 0x43200000 0 0x00c00000>;
+ };
+ };
+};
+
+&i2c6 {
+ clock-frequency = <400000>;
+ pinctrl-0 = <&i2c6_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mt6360: pmic@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ interrupt-controller;
+ interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "IRQB";
+
+ charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+
+ regulator {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&mt6360_buck2>;
+
+ mt6360_buck1: buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ regulator-always-on;
+ };
+
+ mt6360_buck2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ regulator-always-on;
+ };
+
+ mt6360_ldo1: ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+
+ mt6360_ldo2: ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+
+ mt6360_ldo3: ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+
+ mt6360_ldo5: ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+
+ mt6360_ldo6: ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+
+ mt6360_ldo7: ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_default_pins>;
+ pinctrl-1 = <&mmc0_uhs_pins>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-hw-reset;
+ no-sdio;
+ no-sd;
+ hs400-ds-delay = <0x14c11>;
+ vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
+ vqmmc-supply = <&mt6359_vufs_ldo_reg>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_default_pins>;
+ pinctrl-1 = <&mmc1_uhs_pins>;
+ cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&mt6360_ldo5>;
+ vqmmc-supply = <&mt6360_ldo3>;
+ status = "okay";
+};
+
+&mt6359_vbbck_ldo_reg {
+ regulator-always-on;
+};
+
+&mt6359_vcore_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vgpu11_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vproc1_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vproc2_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vpu_buck_reg {
+ regulator-always-on;
+};
+
+&mt6359_vrf12_ldo_reg {
+ regulator-always-on;
+};
+
+&mt6359_vsram_md_ldo_reg {
+ regulator-always-on;
+};
+
+&mt6359_vsram_others_ldo_reg {
+ regulator-always-on;
+};
+
+&pio {
+ gpio_keys_pins: gpio-keys-pins {
+ pins {
+ pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+ input-enable;
+ };
+ };
+
+ i2c6_pins: i2c6-pins {
+ pins {
+ pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+ <PINMUX_GPIO26__FUNC_SCL6>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_default_pins: mmc0-default-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc0_uhs_pins: mmc0-uhs-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_default_pins: mmc1-default-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+ <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-insert {
+ pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_uhs_pins: mmc1-uhs-pins {
+ pins-clk {
+ pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
+ <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
+ <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
+ <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
+ <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+ <PINMUX_GPIO99__FUNC_URXD0>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ pins {
+ pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
+ <PINMUX_GPIO103__FUNC_URXD1>;
+ };
+ };
+};
+
+
+&pmic {
+ interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&u3phy0 {
+ status = "okay";
+};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
+&u3phy3 {
+ status = "okay";
+};
+
+&xhci0 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&otg_vbus_regulator>;
+ status = "okay";
+};
+
+&xhci1 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ status = "okay";
+};
+
+&xhci2 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ status = "okay";
+};
+
+&xhci3 {
+ vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-evb.dts b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
new file mode 100644
index 000000000000..db25a515e420
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195-evb.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+/dts-v1/;
+#include "mt8195.dtsi"
+
+/ {
+ model = "MediaTek MT8195 evaluation board";
+ compatible = "mediatek,mt8195-evb", "mediatek,mt8195";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+};
+
+&auxadc {
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pin>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pin>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pin>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pin>;
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&nor_flash {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nor_pins_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&pio {
+ i2c0_pin: i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+ <PINMUX_GPIO9__FUNC_SCL0>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ mediatek,drive-strength-adv = <0>;
+ drive-strength = <6>;
+ };
+ };
+
+ i2c1_pin: i2c1-pins {
+ pins {
+ pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
+ <PINMUX_GPIO11__FUNC_SCL1>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ mediatek,drive-strength-adv = <0>;
+ drive-strength = <6>;
+ };
+ };
+
+ i2c4_pin: i2c4-pins {
+ pins {
+ pinmux = <PINMUX_GPIO16__FUNC_SDA4>,
+ <PINMUX_GPIO17__FUNC_SCL4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ mediatek,drive-strength-adv = <7>;
+ };
+ };
+
+ i2c6_pin: i2c6-pins {
+ pins {
+ pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
+ <PINMUX_GPIO26__FUNC_SCL6>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ i2c7_pin: i2c7-pins {
+ pins {
+ pinmux = <PINMUX_GPIO27__FUNC_SCL7>,
+ <PINMUX_GPIO28__FUNC_SDA7>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ nor_pins_default: nor-pins {
+ pins0 {
+ pinmux = <PINMUX_GPIO142__FUNC_SPINOR_IO0>,
+ <PINMUX_GPIO141__FUNC_SPINOR_CK>,
+ <PINMUX_GPIO143__FUNC_SPINOR_IO1>;
+ bias-pull-down;
+ };
+
+ pins1 {
+ pinmux = <PINMUX_GPIO140__FUNC_SPINOR_CS>,
+ <PINMUX_GPIO130__FUNC_SPINOR_IO2>,
+ <PINMUX_GPIO131__FUNC_SPINOR_IO3>;
+ bias-pull-up;
+ };
+ };
+
+ uart0_pin: uart0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
+ <PINMUX_GPIO99__FUNC_URXD0>;
+ };
+ };
+};
+
+&u3phy0 {
+ status="okay";
+};
+
+&u3phy1 {
+ status="okay";
+};
+
+&u3phy2 {
+ status="okay";
+};
+
+&u3phy3 {
+ status="okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pin>;
+ status = "okay";
+};
+
+&xhci0 {
+ status = "okay";
+};
+
+&xhci1 {
+ status = "okay";
+};
+
+&xhci2 {
+ status = "okay";
+};
+
+&xhci3 {
+ /* This controller is connected with a BT device.
+ * Disable usb2 lpm to prevent known issues.
+ */
+ usb2-lpm-disable;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
new file mode 100644
index 000000000000..b57e620c2c72
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -0,0 +1,1045 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Seiya Wang <seiya.wang@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+#include <dt-bindings/reset/ti-syscon.h>
+
+/ {
+ compatible = "mediatek,mt8195";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x000>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu1: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x100>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu2: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x200>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu3: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a55";
+ reg = <0x300>;
+ enable-method = "psci";
+ clock-frequency = <1701000000>;
+ capacity-dmips-mhz = <578>;
+ cpu-idle-states = <&cpu_off_l &cluster_off_l>;
+ next-level-cache = <&l2_0>;
+ #cooling-cells = <2>;
+ };
+
+ cpu4: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x400>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu5: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x500>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu6: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x600>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu7: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a78";
+ reg = <0x700>;
+ enable-method = "psci";
+ clock-frequency = <2171000000>;
+ capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&cpu_off_b &cluster_off_b>;
+ next-level-cache = <&l2_1>;
+ #cooling-cells = <2>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+
+ core2 {
+ cpu = <&cpu2>;
+ };
+
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+
+ core1 {
+ cpu = <&cpu5>;
+ };
+
+ core2 {
+ cpu = <&cpu6>;
+ };
+
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ cpu_off_l: cpu-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <95>;
+ min-residency-us = <580>;
+ };
+
+ cpu_off_b: cpu-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x00010001>;
+ local-timer-stop;
+ entry-latency-us = <45>;
+ exit-latency-us = <140>;
+ min-residency-us = <740>;
+ };
+
+ cluster_off_l: cluster-off-l {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <55>;
+ exit-latency-us = <155>;
+ min-residency-us = <840>;
+ };
+
+ cluster_off_b: cluster-off-b {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x01010002>;
+ local-timer-stop;
+ entry-latency-us = <50>;
+ exit-latency-us = <200>;
+ min-residency-us = <1000>;
+ };
+ };
+
+ l2_0: l2-cache0 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l2_1: l2-cache1 {
+ compatible = "cache";
+ next-level-cache = <&l3_0>;
+ };
+
+ l3_0: l3-cache {
+ compatible = "cache";
+ };
+ };
+
+ dsu-pmu {
+ compatible = "arm,dsu-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
+ cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+ <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+ };
+
+ clk26m: oscillator-26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ clk32k: oscillator-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "clk32k";
+ };
+
+ pmu-a55 {
+ compatible = "arm,cortex-a55-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
+ };
+
+ pmu-a78 {
+ compatible = "arm,cortex-a78-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer: timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>,
+ <0 0x0c040000 0 0x200000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ };
+ };
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8195-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg_ao: syscon@10001000 {
+ compatible = "mediatek,mt8195-infracfg_ao", "syscon", "simple-mfd";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+
+ infracfg_rst: reset-controller {
+ compatible = "ti,syscon-reset";
+ #reset-cells = <1>;
+ ti,reset-bits = <
+ 0x140 18 0x144 18 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* pcie */
+ 0x120 0 0x124 0 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
+ 0x730 10 0x734 10 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* thermal */
+ 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* svs gpu */
+ >;
+ };
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt8195-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8195-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>,
+ <0 0x11d30000 0 0x1000>,
+ <0 0x11d40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11eb0000 0 0x1000>,
+ <0 0x11f40000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+ "iocfg_br", "iocfg_lm", "iocfg_rb",
+ "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 144>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8195-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8195-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ systimer: timer@10017000 {
+ compatible = "mediatek,mt8195-timer",
+ "mediatek,mt6765-timer";
+ reg = <0 0x10017000 0 0x1000>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_CLK26M_D2>;
+ };
+
+ pwrap: pwrap@10024000 {
+ compatible = "mediatek,mt8195-pwrap", "syscon";
+ reg = <0 0x10024000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>,
+ <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>;
+ clock-names = "spi", "wrap";
+ assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC>;
+ assigned-clock-parents = <&topckgen CLK_TOP_ULPOSC1_D10>;
+ };
+
+ scp_adsp: clock-controller@10720000 {
+ compatible = "mediatek,mt8195-scp_adsp";
+ reg = <0 0x10720000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ uart0: serial@11001100 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001100 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11001200 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001200 0 0x100>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11001300 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001300 0 0x100>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart3: serial@11001400 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001400 0 0x100>;
+ interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart4: serial@11001500 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001500 0 0x100>;
+ interrupts = <GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART4>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart5: serial@11001600 {
+ compatible = "mediatek,mt8195-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11001600 0 0x100>;
+ interrupts = <GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART5>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ auxadc: auxadc@11002000 {
+ compatible = "mediatek,mt8195-auxadc",
+ "mediatek,mt8173-auxadc";
+ reg = <0 0x11002000 0 0x1000>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ pericfg_ao: syscon@11003000 {
+ compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+ reg = <0 0x11003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi1: spi@11010000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11010000 0 0x1000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI1>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi2: spi@11012000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11012000 0 0x1000>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi3: spi@11013000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11013000 0 0x1000>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI3>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi4: spi@11018000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11018000 0 0x1000>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI4>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi5: spi@11019000 {
+ compatible = "mediatek,mt8195-spi",
+ "mediatek,mt6765-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11019000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>,
+ <&topckgen CLK_TOP_SPI>,
+ <&infracfg_ao CLK_INFRA_AO_SPI5>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spis0: spi@1101d000 {
+ compatible = "mediatek,mt8195-spi-slave";
+ reg = <0 0x1101d000 0 0x1000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_SPIS0>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+ status = "disabled";
+ };
+
+ spis1: spi@1101e000 {
+ compatible = "mediatek,mt8195-spi-slave";
+ reg = <0 0x1101e000 0 0x1000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_SPIS1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPIS>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D6>;
+ status = "disabled";
+ };
+
+ xhci0: usb@11200000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u3port0 PHY_TYPE_USB3>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP>,
+ <&topckgen CLK_TOP_SSUSB_XHCI>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&infracfg_ao CLK_INFRA_AO_SSUSB>,
+ <&topckgen CLK_TOP_SSUSB_REF>,
+ <&apmixedsys CLK_APMIXED_USB1PLL>,
+ <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+ status = "disabled";
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8195-mmc",
+ "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x10000>,
+ <0 0x11f50000 0 0x1000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC0>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8195-mmc",
+ "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c70000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC1>,
+ <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@11250000 {
+ compatible = "mediatek,mt8195-mmc",
+ "mediatek,mt8183-mmc";
+ reg = <0 0x11250000 0 0x1000>,
+ <0 0x11e60000 0 0x1000>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_MSDC30_2>,
+ <&infracfg_ao CLK_INFRA_AO_CG1_MSDC2>,
+ <&infracfg_ao CLK_INFRA_AO_CG3_MSDC2>;
+ clock-names = "source", "hclk", "source_cg";
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_2>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+ status = "disabled";
+ };
+
+ xhci1: usb@11290000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11290000 0 0x1000>,
+ <0 0x11293e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port1 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP_1P>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_1P>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_1P_BUS>,
+ <&topckgen CLK_TOP_SSUSB_P1_REF>,
+ <&apmixedsys CLK_APMIXED_USB1PLL>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck";
+ status = "disabled";
+ };
+
+ xhci2: usb@112a0000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x112a0000 0 0x1000>,
+ <0 0x112a3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP_2P>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_2P>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>,
+ <&topckgen CLK_TOP_SSUSB_P2_REF>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "xhci_ck";
+ status = "disabled";
+ };
+
+ xhci3: usb@112b0000 {
+ compatible = "mediatek,mt8195-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x112b0000 0 0x1000>,
+ <0 0x112b3e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>;
+ phys = <&u2port3 PHY_TYPE_USB2>;
+ assigned-clocks = <&topckgen CLK_TOP_USB_TOP_3P>,
+ <&topckgen CLK_TOP_SSUSB_XHCI_3P>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>,
+ <&topckgen CLK_TOP_UNIVPLL_D5_D4>;
+ clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>,
+ <&topckgen CLK_TOP_SSUSB_P3_REF>,
+ <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "xhci_ck";
+ status = "disabled";
+ };
+
+ nor_flash: spi@1132c000 {
+ compatible = "mediatek,mt8195-nor",
+ "mediatek,mt8173-nor";
+ reg = <0 0x1132c000 0 0x1000>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&topckgen CLK_TOP_SPINOR>,
+ <&pericfg_ao CLK_PERI_AO_FLASHIF_FLASH>,
+ <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>;
+ clock-names = "spi", "sf", "axi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ u3phy2: t-phy@11c40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c40000 0x700>;
+ status = "disabled";
+
+ u2port2: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ u3phy3: t-phy@11c50000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11c50000 0x700>;
+ status = "disabled";
+
+ u2port3: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ i2c5: i2c@11d00000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11d00000 0 0x1000>,
+ <0 0x10220580 0 0x80>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C5>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@11d01000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11d01000 0 0x1000>,
+ <0 0x10220600 0 0x80>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C6>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@11d02000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11d02000 0 0x1000>,
+ <0 0x10220680 0 0x80>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ imp_iic_wrap_s: clock-controller@11d03000 {
+ compatible = "mediatek,mt8195-imp_iic_wrap_s";
+ reg = <0 0x11d03000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ i2c0: i2c@11e00000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e00000 0 0x1000>,
+ <0 0x10220080 0 0x80>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C0>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ };
+
+ i2c1: i2c@11e01000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e01000 0 0x1000>,
+ <0 0x10220200 0 0x80>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C1>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11e02000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e02000 0 0x1000>,
+ <0 0x10220380 0 0x80>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C2>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11e03000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e03000 0 0x1000>,
+ <0 0x10220480 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C3>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11e04000 {
+ compatible = "mediatek,mt8195-i2c",
+ "mediatek,mt8192-i2c";
+ reg = <0 0x11e04000 0 0x1000>,
+ <0 0x10220500 0 0x80>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH 0>;
+ clock-div = <1>;
+ clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C4>,
+ <&infracfg_ao CLK_INFRA_AO_APDMA_B>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ imp_iic_wrap_w: clock-controller@11e05000 {
+ compatible = "mediatek,mt8195-imp_iic_wrap_w";
+ reg = <0 0x11e05000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ u3phy1: t-phy@11e30000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e30000 0xe00>;
+ status = "disabled";
+
+ u2port1: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>,
+ <&clk26m>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u3port1: usb-phy@700 {
+ reg = <0x700 0x700>;
+ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+ <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ u3phy0: t-phy@11e40000 {
+ compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11e40000 0xe00>;
+ status = "disabled";
+
+ u2port0: usb-phy@0 {
+ reg = <0x0 0x700>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>,
+ <&clk26m>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u3port0: usb-phy@700 {
+ reg = <0x700 0x700>;
+ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>,
+ <&topckgen CLK_TOP_SSUSB_PHY_REF>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ ufsphy: ufs-phy@11fa0000 {
+ compatible = "mediatek,mt8195-ufsphy", "mediatek,mt8183-ufsphy";
+ reg = <0 0x11fa0000 0 0xc000>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "unipro", "mp";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ mfgcfg: clock-controller@13fbf000 {
+ compatible = "mediatek,mt8195-mfgcfg";
+ reg = <0 0x13fbf000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ wpesys: clock-controller@14e00000 {
+ compatible = "mediatek,mt8195-wpesys";
+ reg = <0 0x14e00000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ wpesys_vpp0: clock-controller@14e02000 {
+ compatible = "mediatek,mt8195-wpesys_vpp0";
+ reg = <0 0x14e02000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ wpesys_vpp1: clock-controller@14e03000 {
+ compatible = "mediatek,mt8195-wpesys_vpp1";
+ reg = <0 0x14e03000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: clock-controller@15000000 {
+ compatible = "mediatek,mt8195-imgsys";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys1_dip_top: clock-controller@15110000 {
+ compatible = "mediatek,mt8195-imgsys1_dip_top";
+ reg = <0 0x15110000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys1_dip_nr: clock-controller@15130000 {
+ compatible = "mediatek,mt8195-imgsys1_dip_nr";
+ reg = <0 0x15130000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys1_wpe: clock-controller@15220000 {
+ compatible = "mediatek,mt8195-imgsys1_wpe";
+ reg = <0 0x15220000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipesys: clock-controller@15330000 {
+ compatible = "mediatek,mt8195-ipesys";
+ reg = <0 0x15330000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: clock-controller@16000000 {
+ compatible = "mediatek,mt8195-camsys";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_rawa: clock-controller@1604f000 {
+ compatible = "mediatek,mt8195-camsys_rawa";
+ reg = <0 0x1604f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_yuva: clock-controller@1606f000 {
+ compatible = "mediatek,mt8195-camsys_yuva";
+ reg = <0 0x1606f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_rawb: clock-controller@1608f000 {
+ compatible = "mediatek,mt8195-camsys_rawb";
+ reg = <0 0x1608f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_yuvb: clock-controller@160af000 {
+ compatible = "mediatek,mt8195-camsys_yuvb";
+ reg = <0 0x160af000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys_mraw: clock-controller@16140000 {
+ compatible = "mediatek,mt8195-camsys_mraw";
+ reg = <0 0x16140000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ccusys: clock-controller@17200000 {
+ compatible = "mediatek,mt8195-ccusys";
+ reg = <0 0x17200000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys_soc: clock-controller@1800f000 {
+ compatible = "mediatek,mt8195-vdecsys_soc";
+ reg = <0 0x1800f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: clock-controller@1802f000 {
+ compatible = "mediatek,mt8195-vdecsys";
+ reg = <0 0x1802f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys_core1: clock-controller@1803f000 {
+ compatible = "mediatek,mt8195-vdecsys_core1";
+ reg = <0 0x1803f000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ apusys_pll: clock-controller@190f3000 {
+ compatible = "mediatek,mt8195-apusys_pll";
+ reg = <0 0x190f3000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: clock-controller@1a000000 {
+ compatible = "mediatek,mt8195-vencsys";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys_core1: clock-controller@1b000000 {
+ compatible = "mediatek,mt8195-vencsys_core1";
+ reg = <0 0x1b000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index fcddec14738d..7a717f926929 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -25,7 +25,6 @@
gpio-keys {
compatible = "gpio-keys";
- input-name = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_default>;
diff --git a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
index 03f107e427d7..ce0747fd6444 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_nand.dtsi
@@ -19,7 +19,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <14>; /* CS14 */
- spi-flash@6 {
+ flash@6 {
compatible = "spi-nand";
pinctrl-0 = <&cs14_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
index 9baa085d7861..dbf8c1d48a02 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -47,7 +47,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
- spi-flash@9 {
+ flash@9 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
@@ -59,7 +59,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <1>; /* CS1 */
- spi-flash@9 {
+ flash@9 {
compatible = "spi-nand";
pinctrl-0 = <&cs1_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 33faf1f3264f..699256f1b9d8 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -274,7 +274,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0>;
@@ -289,7 +289,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
- spi-flash@9 {
+ flash@9 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index ef96e6d8c6b3..d10a9172b529 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -89,7 +89,7 @@
&spi0 {
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0>;
@@ -104,7 +104,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>; /* CS0 */
- spi-flash@9 {
+ flash@9 {
compatible = "jedec,spi-nor";
spi-max-frequency = <8000000>;
reg = <0x9>; /* SPI */
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index c4dee05f330c..70737a09a9b8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -811,6 +811,110 @@
remote-endpoint = <&mixer_out5_ep>;
};
};
+
+ xbar_asrc_in1_port: port@63 {
+ reg = <0x63>;
+
+ xbar_asrc_in1_ep: endpoint {
+ remote-endpoint = <&asrc_in1_ep>;
+ };
+ };
+
+ port@64 {
+ reg = <0x64>;
+
+ xbar_asrc_out1_ep: endpoint {
+ remote-endpoint = <&asrc_out1_ep>;
+ };
+ };
+
+ xbar_asrc_in2_port: port@65 {
+ reg = <0x65>;
+
+ xbar_asrc_in2_ep: endpoint {
+ remote-endpoint = <&asrc_in2_ep>;
+ };
+ };
+
+ port@66 {
+ reg = <0x66>;
+
+ xbar_asrc_out2_ep: endpoint {
+ remote-endpoint = <&asrc_out2_ep>;
+ };
+ };
+
+ xbar_asrc_in3_port: port@67 {
+ reg = <0x67>;
+
+ xbar_asrc_in3_ep: endpoint {
+ remote-endpoint = <&asrc_in3_ep>;
+ };
+ };
+
+ port@68 {
+ reg = <0x68>;
+
+ xbar_asrc_out3_ep: endpoint {
+ remote-endpoint = <&asrc_out3_ep>;
+ };
+ };
+
+ xbar_asrc_in4_port: port@69 {
+ reg = <0x69>;
+
+ xbar_asrc_in4_ep: endpoint {
+ remote-endpoint = <&asrc_in4_ep>;
+ };
+ };
+
+ port@6a {
+ reg = <0x6a>;
+
+ xbar_asrc_out4_ep: endpoint {
+ remote-endpoint = <&asrc_out4_ep>;
+ };
+ };
+
+ xbar_asrc_in5_port: port@6b {
+ reg = <0x6b>;
+
+ xbar_asrc_in5_ep: endpoint {
+ remote-endpoint = <&asrc_in5_ep>;
+ };
+ };
+
+ port@6c {
+ reg = <0x6c>;
+
+ xbar_asrc_out5_ep: endpoint {
+ remote-endpoint = <&asrc_out5_ep>;
+ };
+ };
+
+ xbar_asrc_in6_port: port@6d {
+ reg = <0x6d>;
+
+ xbar_asrc_in6_ep: endpoint {
+ remote-endpoint = <&asrc_in6_ep>;
+ };
+ };
+
+ port@6e {
+ reg = <0x6e>;
+
+ xbar_asrc_out6_ep: endpoint {
+ remote-endpoint = <&asrc_out6_ep>;
+ };
+ };
+
+ xbar_asrc_in7_port: port@6f {
+ reg = <0x6f>;
+
+ xbar_asrc_in7_ep: endpoint {
+ remote-endpoint = <&asrc_in7_ep>;
+ };
+ };
};
admaif@290f000 {
@@ -1935,6 +2039,119 @@
};
};
};
+
+ asrc@2910000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ asrc_in1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ asrc_in2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in2_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ asrc_in3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in3_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ asrc_in4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in4_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ asrc_in5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in5_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ asrc_in6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in6_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ asrc_in7_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in7_ep>;
+ };
+ };
+
+ asrc_out1_port: port@7 {
+ reg = <0x7>;
+
+ asrc_out1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out1_ep>;
+ };
+ };
+
+ asrc_out2_port: port@8 {
+ reg = <0x8>;
+
+ asrc_out2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out2_ep>;
+ };
+ };
+
+ asrc_out3_port: port@9 {
+ reg = <0x9>;
+
+ asrc_out3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out3_ep>;
+ };
+ };
+
+ asrc_out4_port: port@a {
+ reg = <0xa>;
+
+ asrc_out4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out4_ep>;
+ };
+ };
+
+ asrc_out5_port: port@b {
+ reg = <0xb>;
+
+ asrc_out5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out5_ep>;
+ };
+ };
+
+ asrc_out6_port: port@c {
+ reg = <0xc>;
+
+ asrc_out6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out6_ep>;
+ };
+ };
+ };
+ };
};
};
@@ -2331,6 +2548,10 @@
<&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
<&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
<&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+ <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+ <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+ <&xbar_asrc_in7_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
@@ -2348,6 +2569,8 @@
<&mixer_out1_port>, <&mixer_out2_port>,
<&mixer_out3_port>, <&mixer_out4_port>,
<&mixer_out5_port>,
+ <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+ <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
/* I/O */
<&i2s1_port>, <&i2s2_port>, <&i2s3_port>, <&i2s4_port>,
<&i2s5_port>, <&i2s6_port>, <&dmic1_port>, <&dmic2_port>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
index 4631504c3c7a..7e9aad9ff177 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts
@@ -349,7 +349,7 @@
status = "okay";
};
- fan: fan {
+ fan: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm4 0 45334>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index e9b40f5d79ec..0e9afc3e2f26 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -516,12 +516,25 @@
sound-name-prefix = "MIXER1";
status = "disabled";
};
+
+ tegra_asrc: asrc@2910000 {
+ compatible = "nvidia,tegra186-asrc";
+ reg = <0x2910000 0x2000>;
+ sound-name-prefix = "ASRC1";
+ status = "disabled";
+ };
};
};
mc: memory-controller@2c00000 {
compatible = "nvidia,tegra186-mc";
- reg = <0x0 0x02c00000 0x0 0xb0000>;
+ reg = <0x0 0x02c00000 0x0 0x10000>, /* MC-SID */
+ <0x0 0x02c10000 0x0 0x10000>, /* Broadcast channel */
+ <0x0 0x02c20000 0x0 0x10000>, /* MC0 */
+ <0x0 0x02c30000 0x0 0x10000>, /* MC1 */
+ <0x0 0x02c40000 0x0 0x10000>, /* MC2 */
+ <0x0 0x02c50000 0x0 0x10000>; /* MC3 */
+ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 2478ece9e67c..bce518ace6a0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -764,6 +764,110 @@
remote-endpoint = <&mixer_out5_ep>;
};
};
+
+ xbar_asrc_in1_port: port@63 {
+ reg = <0x63>;
+
+ xbar_asrc_in1_ep: endpoint {
+ remote-endpoint = <&asrc_in1_ep>;
+ };
+ };
+
+ port@64 {
+ reg = <0x64>;
+
+ xbar_asrc_out1_ep: endpoint {
+ remote-endpoint = <&asrc_out1_ep>;
+ };
+ };
+
+ xbar_asrc_in2_port: port@65 {
+ reg = <0x65>;
+
+ xbar_asrc_in2_ep: endpoint {
+ remote-endpoint = <&asrc_in2_ep>;
+ };
+ };
+
+ port@66 {
+ reg = <0x66>;
+
+ xbar_asrc_out2_ep: endpoint {
+ remote-endpoint = <&asrc_out2_ep>;
+ };
+ };
+
+ xbar_asrc_in3_port: port@67 {
+ reg = <0x67>;
+
+ xbar_asrc_in3_ep: endpoint {
+ remote-endpoint = <&asrc_in3_ep>;
+ };
+ };
+
+ port@68 {
+ reg = <0x68>;
+
+ xbar_asrc_out3_ep: endpoint {
+ remote-endpoint = <&asrc_out3_ep>;
+ };
+ };
+
+ xbar_asrc_in4_port: port@69 {
+ reg = <0x69>;
+
+ xbar_asrc_in4_ep: endpoint {
+ remote-endpoint = <&asrc_in4_ep>;
+ };
+ };
+
+ port@6a {
+ reg = <0x6a>;
+
+ xbar_asrc_out4_ep: endpoint {
+ remote-endpoint = <&asrc_out4_ep>;
+ };
+ };
+
+ xbar_asrc_in5_port: port@6b {
+ reg = <0x6b>;
+
+ xbar_asrc_in5_ep: endpoint {
+ remote-endpoint = <&asrc_in5_ep>;
+ };
+ };
+
+ port@6c {
+ reg = <0x6c>;
+
+ xbar_asrc_out5_ep: endpoint {
+ remote-endpoint = <&asrc_out5_ep>;
+ };
+ };
+
+ xbar_asrc_in6_port: port@6d {
+ reg = <0x6d>;
+
+ xbar_asrc_in6_ep: endpoint {
+ remote-endpoint = <&asrc_in6_ep>;
+ };
+ };
+
+ port@6e {
+ reg = <0x6e>;
+
+ xbar_asrc_out6_ep: endpoint {
+ remote-endpoint = <&asrc_out6_ep>;
+ };
+ };
+
+ xbar_asrc_in7_port: port@6f {
+ reg = <0x6f>;
+
+ xbar_asrc_in7_ep: endpoint {
+ remote-endpoint = <&asrc_in7_ep>;
+ };
+ };
};
admaif@290f000 {
@@ -1734,6 +1838,119 @@
};
};
};
+
+ asrc@2910000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ asrc_in1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ asrc_in2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in2_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ asrc_in3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in3_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ asrc_in4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in4_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ asrc_in5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in5_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ asrc_in6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in6_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ asrc_in7_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in7_ep>;
+ };
+ };
+
+ asrc_out1_port: port@7 {
+ reg = <0x7>;
+
+ asrc_out1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out1_ep>;
+ };
+ };
+
+ asrc_out2_port: port@8 {
+ reg = <0x8>;
+
+ asrc_out2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out2_ep>;
+ };
+ };
+
+ asrc_out3_port: port@9 {
+ reg = <0x9>;
+
+ asrc_out3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out3_ep>;
+ };
+ };
+
+ asrc_out4_port: port@a {
+ reg = <0xa>;
+
+ asrc_out4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out4_ep>;
+ };
+ };
+
+ asrc_out5_port: port@b {
+ reg = <0xb>;
+
+ asrc_out5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out5_ep>;
+ };
+ };
+
+ asrc_out6_port: port@c {
+ reg = <0xc>;
+
+ asrc_out6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out6_ep>;
+ };
+ };
+ };
+ };
};
};
@@ -1989,7 +2206,7 @@
"p2u-5", "p2u-6", "p2u-7";
};
- fan: fan {
+ fan: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm4 0 45334>;
@@ -2052,6 +2269,10 @@
<&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
<&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
<&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+ <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+ <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+ <&xbar_asrc_in7_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
@@ -2068,6 +2289,8 @@
<&adx4_out3_port>, <&adx4_out4_port>,
<&mixer_out1_port>, <&mixer_out2_port>, <&mixer_out3_port>,
<&mixer_out4_port>, <&mixer_out5_port>,
+ <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+ <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
/* BE I/O Ports */
<&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
<&dmic3_port>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 32ce7904f44f..7acc32dd290a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -774,6 +774,110 @@
remote-endpoint = <&mixer_out5_ep>;
};
};
+
+ xbar_asrc_in1_port: port@63 {
+ reg = <0x63>;
+
+ xbar_asrc_in1_ep: endpoint {
+ remote-endpoint = <&asrc_in1_ep>;
+ };
+ };
+
+ port@64 {
+ reg = <0x64>;
+
+ xbar_asrc_out1_ep: endpoint {
+ remote-endpoint = <&asrc_out1_ep>;
+ };
+ };
+
+ xbar_asrc_in2_port: port@65 {
+ reg = <0x65>;
+
+ xbar_asrc_in2_ep: endpoint {
+ remote-endpoint = <&asrc_in2_ep>;
+ };
+ };
+
+ port@66 {
+ reg = <0x66>;
+
+ xbar_asrc_out2_ep: endpoint {
+ remote-endpoint = <&asrc_out2_ep>;
+ };
+ };
+
+ xbar_asrc_in3_port: port@67 {
+ reg = <0x67>;
+
+ xbar_asrc_in3_ep: endpoint {
+ remote-endpoint = <&asrc_in3_ep>;
+ };
+ };
+
+ port@68 {
+ reg = <0x68>;
+
+ xbar_asrc_out3_ep: endpoint {
+ remote-endpoint = <&asrc_out3_ep>;
+ };
+ };
+
+ xbar_asrc_in4_port: port@69 {
+ reg = <0x69>;
+
+ xbar_asrc_in4_ep: endpoint {
+ remote-endpoint = <&asrc_in4_ep>;
+ };
+ };
+
+ port@6a {
+ reg = <0x6a>;
+
+ xbar_asrc_out4_ep: endpoint {
+ remote-endpoint = <&asrc_out4_ep>;
+ };
+ };
+
+ xbar_asrc_in5_port: port@6b {
+ reg = <0x6b>;
+
+ xbar_asrc_in5_ep: endpoint {
+ remote-endpoint = <&asrc_in5_ep>;
+ };
+ };
+
+ port@6c {
+ reg = <0x6c>;
+
+ xbar_asrc_out5_ep: endpoint {
+ remote-endpoint = <&asrc_out5_ep>;
+ };
+ };
+
+ xbar_asrc_in6_port: port@6d {
+ reg = <0x6d>;
+
+ xbar_asrc_in6_ep: endpoint {
+ remote-endpoint = <&asrc_in6_ep>;
+ };
+ };
+
+ port@6e {
+ reg = <0x6e>;
+
+ xbar_asrc_out6_ep: endpoint {
+ remote-endpoint = <&asrc_out6_ep>;
+ };
+ };
+
+ xbar_asrc_in7_port: port@6f {
+ reg = <0x6f>;
+
+ xbar_asrc_in7_ep: endpoint {
+ remote-endpoint = <&asrc_in7_ep>;
+ };
+ };
};
admaif@290f000 {
@@ -1794,6 +1898,119 @@
};
};
};
+
+ asrc@2910000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ asrc_in1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ asrc_in2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in2_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ asrc_in3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in3_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ asrc_in4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in4_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ asrc_in5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in5_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ asrc_in6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in6_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ asrc_in7_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in7_ep>;
+ };
+ };
+
+ asrc_out1_port: port@7 {
+ reg = <0x7>;
+
+ asrc_out1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out1_ep>;
+ };
+ };
+
+ asrc_out2_port: port@8 {
+ reg = <0x8>;
+
+ asrc_out2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out2_ep>;
+ };
+ };
+
+ asrc_out3_port: port@9 {
+ reg = <0x9>;
+
+ asrc_out3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out3_ep>;
+ };
+ };
+
+ asrc_out4_port: port@a {
+ reg = <0xa>;
+
+ asrc_out4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out4_ep>;
+ };
+ };
+
+ asrc_out5_port: port@b {
+ reg = <0xb>;
+
+ asrc_out5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out5_ep>;
+ };
+ };
+
+ asrc_out6_port: port@c {
+ reg = <0xc>;
+
+ asrc_out6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out6_ep>;
+ };
+ };
+ };
+ };
};
};
@@ -1993,7 +2210,7 @@
"p2u-5", "p2u-6", "p2u-7";
};
- fan: fan {
+ fan: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm6 0 45334>;
@@ -2102,6 +2319,10 @@
<&xbar_mixer_in5_port>, <&xbar_mixer_in6_port>,
<&xbar_mixer_in7_port>, <&xbar_mixer_in8_port>,
<&xbar_mixer_in9_port>, <&xbar_mixer_in10_port>,
+ <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+ <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+ <&xbar_asrc_in7_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
@@ -2119,6 +2340,8 @@
<&mixer_out1_port>, <&mixer_out2_port>,
<&mixer_out3_port>, <&mixer_out4_port>,
<&mixer_out5_port>,
+ <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+ <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
/* BE I/O Ports */
<&i2s3_port>, <&i2s5_port>,
<&dmic1_port>, <&dmic2_port>, <&dmic4_port>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 751ebe5e9506..d1f8248c00f4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -569,6 +569,14 @@
sound-name-prefix = "MIXER1";
status = "disabled";
};
+
+ tegra_asrc: asrc@2910000 {
+ compatible = "nvidia,tegra194-asrc",
+ "nvidia,tegra186-asrc";
+ reg = <0x2910000 0x2000>;
+ sound-name-prefix = "ASRC1";
+ status = "disabled";
+ };
};
};
@@ -604,9 +612,27 @@
mc: memory-controller@2c00000 {
compatible = "nvidia,tegra194-mc";
- reg = <0x02c00000 0x100000>,
- <0x02b80000 0x040000>,
- <0x01700000 0x100000>;
+ reg = <0x02c00000 0x10000>, /* MC-SID */
+ <0x02c10000 0x10000>, /* MC Broadcast*/
+ <0x02c20000 0x10000>, /* MC0 */
+ <0x02c30000 0x10000>, /* MC1 */
+ <0x02c40000 0x10000>, /* MC2 */
+ <0x02c50000 0x10000>, /* MC3 */
+ <0x02b80000 0x10000>, /* MC4 */
+ <0x02b90000 0x10000>, /* MC5 */
+ <0x02ba0000 0x10000>, /* MC6 */
+ <0x02bb0000 0x10000>, /* MC7 */
+ <0x01700000 0x10000>, /* MC8 */
+ <0x01710000 0x10000>, /* MC9 */
+ <0x01720000 0x10000>, /* MC10 */
+ <0x01730000 0x10000>, /* MC11 */
+ <0x01740000 0x10000>, /* MC12 */
+ <0x01750000 0x10000>, /* MC13 */
+ <0x01760000 0x10000>, /* MC14 */
+ <0x01770000 0x10000>; /* MC15 */
+ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+ "ch11", "ch12", "ch13", "ch14", "ch15";
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
#interconnect-cells = <1>;
status = "disabled";
@@ -934,6 +960,11 @@
clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
+ assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+ <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+ assigned-clock-parents =
+ <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+ <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
@@ -968,6 +999,11 @@
clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
+ assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+ <&bpmp TEGRA194_CLK_PLLC4_MUXED>;
+ assigned-clock-parents =
+ <&bpmp TEGRA194_CLK_PLLC4_MUXED>,
+ <&bpmp TEGRA194_CLK_PLLC4_VCO_DIV2>;
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 72c2dc3c14ea..746bd52ea3f7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -1657,7 +1657,7 @@
};
};
- fan: fan {
+ fan: pwm-fan {
compatible = "pwm-fan";
pwms = <&pwm 3 45334>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 218a2b32200f..4f0e51f1a343 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1366,8 +1366,9 @@
<&tegra_car TEGRA210_CLK_DFLL_REF>,
<&tegra_car TEGRA210_CLK_I2C5>;
clock-names = "soc", "ref", "i2c";
- resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>;
- reset-names = "dvco";
+ resets = <&tegra_car TEGRA210_RST_DFLL_DVCO>,
+ <&tegra_car 155>;
+ reset-names = "dvco", "dfll";
#clock-cells = <0>;
clock-output-names = "dfllCPU_out";
status = "disabled";
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
index d95a542c0bca..798de9226ba5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -7,6 +7,18 @@
compatible = "nvidia,p3701-0000", "nvidia,tegra234";
bus@0 {
+ spi@3270000 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <102000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+ };
+
mmc@3460000 {
status = "okay";
bus-width = <8>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 34d6a01ee1c6..eaf1994abb04 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -763,6 +763,110 @@
remote-endpoint = <&mix_out5>;
};
};
+
+ xbar_asrc_in1_port: port@63 {
+ reg = <0x63>;
+
+ xbar_asrc_in1_ep: endpoint {
+ remote-endpoint = <&asrc_in1_ep>;
+ };
+ };
+
+ port@64 {
+ reg = <0x64>;
+
+ xbar_asrc_out1_ep: endpoint {
+ remote-endpoint = <&asrc_out1_ep>;
+ };
+ };
+
+ xbar_asrc_in2_port: port@65 {
+ reg = <0x65>;
+
+ xbar_asrc_in2_ep: endpoint {
+ remote-endpoint = <&asrc_in2_ep>;
+ };
+ };
+
+ port@66 {
+ reg = <0x66>;
+
+ xbar_asrc_out2_ep: endpoint {
+ remote-endpoint = <&asrc_out2_ep>;
+ };
+ };
+
+ xbar_asrc_in3_port: port@67 {
+ reg = <0x67>;
+
+ xbar_asrc_in3_ep: endpoint {
+ remote-endpoint = <&asrc_in3_ep>;
+ };
+ };
+
+ port@68 {
+ reg = <0x68>;
+
+ xbar_asrc_out3_ep: endpoint {
+ remote-endpoint = <&asrc_out3_ep>;
+ };
+ };
+
+ xbar_asrc_in4_port: port@69 {
+ reg = <0x69>;
+
+ xbar_asrc_in4_ep: endpoint {
+ remote-endpoint = <&asrc_in4_ep>;
+ };
+ };
+
+ port@6a {
+ reg = <0x6a>;
+
+ xbar_asrc_out4_ep: endpoint {
+ remote-endpoint = <&asrc_out4_ep>;
+ };
+ };
+
+ xbar_asrc_in5_port: port@6b {
+ reg = <0x6b>;
+
+ xbar_asrc_in5_ep: endpoint {
+ remote-endpoint = <&asrc_in5_ep>;
+ };
+ };
+
+ port@6c {
+ reg = <0x6c>;
+
+ xbar_asrc_out5_ep: endpoint {
+ remote-endpoint = <&asrc_out5_ep>;
+ };
+ };
+
+ xbar_asrc_in6_port: port@6d {
+ reg = <0x6d>;
+
+ xbar_asrc_in6_ep: endpoint {
+ remote-endpoint = <&asrc_in6_ep>;
+ };
+ };
+
+ port@6e {
+ reg = <0x6e>;
+
+ xbar_asrc_out6_ep: endpoint {
+ remote-endpoint = <&asrc_out6_ep>;
+ };
+ };
+
+ xbar_asrc_in7_port: port@6f {
+ reg = <0x6f>;
+
+ xbar_asrc_in7_ep: endpoint {
+ remote-endpoint = <&asrc_in7_ep>;
+ };
+ };
};
i2s@2901000 {
@@ -1733,6 +1837,119 @@
};
};
};
+
+ asrc@2910000 {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ asrc_in1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in1_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <0x1>;
+
+ asrc_in2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in2_ep>;
+ };
+ };
+
+ port@2 {
+ reg = <0x2>;
+
+ asrc_in3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in3_ep>;
+ };
+ };
+
+ port@3 {
+ reg = <0x3>;
+
+ asrc_in4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in4_ep>;
+ };
+ };
+
+ port@4 {
+ reg = <0x4>;
+
+ asrc_in5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in5_ep>;
+ };
+ };
+
+ port@5 {
+ reg = <0x5>;
+
+ asrc_in6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in6_ep>;
+ };
+ };
+
+ port@6 {
+ reg = <0x6>;
+
+ asrc_in7_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_in7_ep>;
+ };
+ };
+
+ asrc_out1_port: port@7 {
+ reg = <0x7>;
+
+ asrc_out1_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out1_ep>;
+ };
+ };
+
+ asrc_out2_port: port@8 {
+ reg = <0x8>;
+
+ asrc_out2_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out2_ep>;
+ };
+ };
+
+ asrc_out3_port: port@9 {
+ reg = <0x9>;
+
+ asrc_out3_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out3_ep>;
+ };
+ };
+
+ asrc_out4_port: port@a {
+ reg = <0xa>;
+
+ asrc_out4_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out4_ep>;
+ };
+ };
+
+ asrc_out5_port: port@b {
+ reg = <0xb>;
+
+ asrc_out5_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out5_ep>;
+ };
+ };
+
+ asrc_out6_port: port@c {
+ reg = <0xc>;
+
+ asrc_out6_ep: endpoint {
+ remote-endpoint = <&xbar_asrc_out6_ep>;
+ };
+ };
+ };
+ };
};
dma-controller@2930000 {
@@ -1823,6 +2040,10 @@
<&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
<&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
<&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+ <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>,
+ <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>,
+ <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>,
+ <&xbar_asrc_in7_port>,
/* HW accelerators */
<&sfc1_out_port>, <&sfc2_out_port>,
<&sfc3_out_port>, <&sfc4_out_port>,
@@ -1839,6 +2060,8 @@
<&adx4_out3_port>, <&adx4_out4_port>,
<&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
<&mix_out4_port>, <&mix_out5_port>,
+ <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>,
+ <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>,
/* BE I/O Ports */
<&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
<&dmic3_port>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index aaace605bdaa..cb3af539e477 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -378,6 +378,14 @@
iommus = <&smmu_niso0 TEGRA234_SID_APE>;
status = "disabled";
};
+
+ tegra_asrc: asrc@2910000 {
+ compatible = "nvidia,tegra234-asrc",
+ "nvidia,tegra186-asrc";
+ reg = <0x2910000 0x2000>;
+ sound-name-prefix = "ASRC1";
+ status = "disabled";
+ };
};
adma: dma-controller@2930000 {
@@ -507,9 +515,27 @@
mc: memory-controller@2c00000 {
compatible = "nvidia,tegra234-mc";
- reg = <0x02c00000 0x100000>,
- <0x02b80000 0x040000>,
- <0x01700000 0x100000>;
+ reg = <0x02c00000 0x10000>, /* MC-SID */
+ <0x02c10000 0x10000>, /* MC Broadcast*/
+ <0x02c20000 0x10000>, /* MC0 */
+ <0x02c30000 0x10000>, /* MC1 */
+ <0x02c40000 0x10000>, /* MC2 */
+ <0x02c50000 0x10000>, /* MC3 */
+ <0x02b80000 0x10000>, /* MC4 */
+ <0x02b90000 0x10000>, /* MC5 */
+ <0x02ba0000 0x10000>, /* MC6 */
+ <0x02bb0000 0x10000>, /* MC7 */
+ <0x01700000 0x10000>, /* MC8 */
+ <0x01710000 0x10000>, /* MC9 */
+ <0x01720000 0x10000>, /* MC10 */
+ <0x01730000 0x10000>, /* MC11 */
+ <0x01740000 0x10000>, /* MC12 */
+ <0x01750000 0x10000>, /* MC13 */
+ <0x01760000 0x10000>, /* MC14 */
+ <0x01770000 0x10000>; /* MC15 */
+ reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7", "ch8", "ch9", "ch10",
+ "ch11", "ch12", "ch13", "ch14", "ch15";
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
#interconnect-cells = <1>;
status = "okay";
@@ -654,6 +680,20 @@
reset-names = "i2c";
};
+ spi@3270000 {
+ compatible = "nvidia,tegra234-qspi";
+ reg = <0x3270000 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA234_CLK_QSPI0_2X_PM>,
+ <&bpmp TEGRA234_CLK_QSPI0_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&bpmp TEGRA234_RESET_QSPI0>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
pwm1: pwm@3280000 {
compatible = "nvidia,tegra194-pwm",
"nvidia,tegra186-pwm";
@@ -666,6 +706,20 @@
#pwm-cells = <2>;
};
+ spi@3300000 {
+ compatible = "nvidia,tegra234-qspi";
+ reg = <0x3300000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&bpmp TEGRA234_CLK_QSPI1_2X_PM>,
+ <&bpmp TEGRA234_CLK_QSPI1_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&bpmp TEGRA234_RESET_QSPI1>;
+ reset-names = "qspi";
+ status = "disabled";
+ };
+
mmc@3460000 {
compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03460000 0x20000>;
@@ -1258,6 +1312,13 @@
};
};
+ ccplex@e000000 {
+ compatible = "nvidia,tegra234-ccplex-cluster";
+ reg = <0x0 0x0e000000 0x0 0x5ffff>;
+ nvidia,bpmp = <&bpmp>;
+ status = "okay";
+ };
+
sram@40000000 {
compatible = "nvidia,tegra234-sysram", "mmio-sram";
reg = <0x0 0x40000000 0x0 0x80000>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f9e6343acd03..2f8aec2cc6db 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -83,11 +83,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb
-dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
index f623db8451f1..56e54ce4d10e 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
@@ -258,6 +258,12 @@
vdd-gfx-supply = <&vdd_gfx>;
};
+&mss_pil {
+ status = "okay";
+ pll-supply = <&vreg_l12a_1p8>;
+ firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
+};
+
&pm8994_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
index 5aec18308712..821cb7c0c183 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
@@ -39,7 +39,7 @@
cs-select = <0>;
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index aac56575e30d..a4d363c187fc 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -318,12 +318,12 @@
#size-cells = <0>;
reg = <0x0 0x078b6000 0x0 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -333,12 +333,12 @@
#size-cells = <0>;
reg = <0x0 0x078b7000 0x0 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
- dmas = <&blsp_dma 17>, <&blsp_dma 16>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -630,6 +630,16 @@
};
};
+ mdio: mdio@90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio";
+ reg = <0x0 0x90000 0x0 0x64>;
+ clocks = <&gcc GCC_MDIO_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+ status = "disabled";
+ };
+
qusb_phy_1: qusb@59000 {
compatible = "qcom,ipq6018-qusb2-phy";
reg = <0x0 0x059000 0x0 0x180>;
@@ -683,7 +693,6 @@
reg = <0x0 0x78000 0x0 0x1C4>;
#address-cells = <2>;
#size-cells = <2>;
- #clock-cells = <1>;
ranges;
clocks = <&gcc GCC_USB0_AUX_CLK>,
@@ -695,12 +704,13 @@
reset-names = "phy","common";
status = "disabled";
- usb0_ssphy: lane@78200 {
+ usb0_ssphy: phy@78200 {
reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
<0x0 0x00078400 0x0 0x200>, /* Rx */
<0x0 0x00078800 0x0 0x1F8>, /* PCS */
<0x0 0x00078600 0x0 0x044>; /* PCS misc */
#phy-cells = <0>;
+ #clock-cells = <1>;
clocks = <&gcc GCC_USB0_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "gcc_usb0_pipe_clk_src";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index b5e1eaa367bf..de20cb98acd3 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -35,7 +35,7 @@
&blsp1_spi1 {
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 07e670829676..ce86d9b10d69 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -29,7 +29,7 @@
&blsp1_spi1 {
status = "ok";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index d80b1cefab10..943243d5515b 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -13,7 +13,7 @@
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
- clock-frequency = <32000>;
+ clock-frequency = <32768>;
#clock-cells = <0>;
};
@@ -467,12 +467,12 @@
#size-cells = <0>;
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "disabled";
@@ -484,12 +484,12 @@
#size-cells = <0>;
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <100000>;
- dmas = <&blsp_dma 17>, <&blsp_dma 16>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 16>, <&blsp_dma 17>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -499,12 +499,12 @@
#size-cells = <0>;
reg = <0x78b9000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
- dmas = <&blsp_dma 21>, <&blsp_dma 20>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 20>, <&blsp_dma 21>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -514,12 +514,12 @@
#size-cells = <0>;
reg = <0x078ba000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <100000>;
- dmas = <&blsp_dma 23>, <&blsp_dma 22>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 22>, <&blsp_dma 23>;
+ dma-names = "tx", "rx";
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index 42d93d3fba36..00488afb413d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -8,18 +8,14 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
/*
* Note: The original firmware from Huawei can only boot 32-bit kernels.
- * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
- * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei
- * forgot to set up (firmware) secure boot for some reason.
- *
- * Also note that Huawei no longer provides bootloader unlock codes.
- * This can be bypassed by patching the bootloader from a custom HYP firmware,
- * making it think the bootloader is unlocked.
- *
- * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP
+ * firmware (e.g. taken from the DragonBoard 410c).
+ * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7)
+ * for suggested installation instructions.
*/
/ {
@@ -216,6 +212,10 @@
status = "okay";
};
+&lpass {
+ status = "okay";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
@@ -260,6 +260,40 @@
cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>;
};
+&sound {
+ status = "okay";
+
+ model = "msm8916";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS External2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cdc_pdm_lines_act>;
+ pinctrl-1 = <&cdc_pdm_lines_sus>;
+
+ primary-dai-link {
+ link-name = "WCD";
+ cpu {
+ sound-dai = <&lpass MI2S_PRIMARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+ };
+ };
+
+ tertiary-dai-link {
+ link-name = "WCD-Capture";
+ cpu {
+ sound-dai = <&lpass MI2S_TERTIARY>;
+ };
+ codec {
+ sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+ };
+ };
+};
+
&usb {
status = "okay";
extcon = <&usb_id>, <&usb_id>;
@@ -269,6 +303,13 @@
extcon = <&usb_id>;
};
+&wcd_codec {
+ qcom,micbias-lvl = <2800>;
+ qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
+ qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
+ qcom,hphl-jack-type-normally-open;
+};
+
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l4_l5_l6-supply = <&pm8916_s4>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index e34963505e07..05472510e29d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -299,7 +299,7 @@
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-msm8916";
+ compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -1314,6 +1314,20 @@
#interrupt-cells = <4>;
};
+ bam_dmux_dma: dma-controller@4044000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x04044000 0x19000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+
+ num-channels = <6>;
+ qcom,num-ees = <1>;
+ qcom,powered-remotely;
+
+ status = "disabled";
+ };
+
mpss: remoteproc@4080000 {
compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
reg = <0x04080000 0x100>,
@@ -1357,6 +1371,22 @@
memory-region = <&mpss_mem>;
};
+ bam_dmux: bam-dmux {
+ compatible = "qcom,bam-dmux";
+
+ interrupt-parent = <&hexagon_smsm>;
+ interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "pc", "pc-ack";
+
+ qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+ qcom,smem-state-names = "pc", "pc-ack";
+
+ dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+ dma-names = "tx", "rx";
+
+ status = "disabled";
+ };
+
smd-edge {
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
@@ -1485,8 +1515,8 @@
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 1>, <&blsp_dma 0>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 0>, <&blsp_dma 1>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart1_default>;
pinctrl-1 = <&blsp1_uart1_sleep>;
@@ -1499,8 +1529,8 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 3>, <&blsp_dma 2>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 2>, <&blsp_dma 3>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
@@ -1511,9 +1541,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b5000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c1_default>;
pinctrl-1 = <&i2c1_sleep>;
@@ -1529,8 +1559,8 @@
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 5>, <&blsp_dma 4>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 4>, <&blsp_dma 5>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
@@ -1543,9 +1573,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
pinctrl-1 = <&i2c2_sleep>;
@@ -1561,8 +1591,8 @@
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 7>, <&blsp_dma 6>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 6>, <&blsp_dma 7>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi2_default>;
pinctrl-1 = <&spi2_sleep>;
@@ -1575,9 +1605,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x500>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c3_default>;
pinctrl-1 = <&i2c3_sleep>;
@@ -1593,8 +1623,8 @@
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 9>, <&blsp_dma 8>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 8>, <&blsp_dma 9>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi3_default>;
pinctrl-1 = <&spi3_sleep>;
@@ -1607,9 +1637,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
@@ -1625,8 +1655,8 @@
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 11>, <&blsp_dma 10>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 10>, <&blsp_dma 11>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi4_default>;
pinctrl-1 = <&spi4_sleep>;
@@ -1639,9 +1669,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b9000 0x500>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c5_default>;
pinctrl-1 = <&i2c5_sleep>;
@@ -1657,8 +1687,8 @@
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 13>, <&blsp_dma 12>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 12>, <&blsp_dma 13>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
@@ -1671,9 +1701,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078ba000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
pinctrl-1 = <&i2c6_sleep>;
@@ -1689,8 +1719,8 @@
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp_dma 15>, <&blsp_dma 14>;
- dma-names = "rx", "tx";
+ dmas = <&blsp_dma 14>, <&blsp_dma 15>;
+ dma-names = "tx", "rx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi6_default>;
pinctrl-1 = <&spi6_sleep>;
@@ -1788,7 +1818,7 @@
qcom,mmio = <&pronto>;
- bt {
+ bluetooth {
compatible = "qcom,wcnss-bt";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 431228faacdd..49903a6e9dfd 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -321,12 +321,12 @@
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
- rpm_requests: rpm_requests {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8953";
qcom,smd-channels = "rpm_requests";
rpmcc: rpmcc {
- compatible = "qcom,rpmcc-msm8953";
+ compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
@@ -923,9 +923,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_1_default>;
@@ -941,9 +941,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_2_default>;
@@ -959,9 +959,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_3_default>;
pinctrl-1 = <&i2c_3_sleep>;
@@ -976,9 +976,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_4_default>;
pinctrl-1 = <&i2c_4_sleep>;
@@ -993,9 +993,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x7af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_5_default>;
pinctrl-1 = <&i2c_5_sleep>;
@@ -1010,9 +1010,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x7af6000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_6_default>;
pinctrl-1 = <&i2c_6_sleep>;
@@ -1027,9 +1027,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x7af7000 0x600>;
interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_7_default>;
pinctrl-1 = <&i2c_7_sleep>;
@@ -1044,9 +1044,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x7af8000 0x600>;
interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "iface", "core";
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>;
+ clock-names = "core", "iface";
+ clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c_8_default>;
pinctrl-1 = <&i2c_8_sleep>;
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
index 84558ab5fe86..7748b745a5df 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -23,20 +23,31 @@
/* This enables graphical output via bootloader-enabled display */
chosen {
- bootargs = "earlycon=tty0 console=tty0";
+ bootargs = "earlycon=tty0 console=tty0 maxcpus=1";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- framebuffer0: framebuffer@3404000 {
- status= "okay";
+ framebuffer0: framebuffer@3400000 {
compatible = "simple-framebuffer";
- reg = <0 0x3404000 0 (1080 * 1920 * 3)>;
+ reg = <0 0x3400000 0 (1080 * 1920 * 3)>;
width = <1080>;
height = <1920>;
stride = <(1080 * 3)>;
format = "r8g8b8";
+ /*
+ * That's a lot of clocks, but it's necessary due
+ * to unused clk cleanup & no panel driver yet..
+ */
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
};
};
@@ -126,6 +137,23 @@
no-map;
};
+&pm8994_spmi_regulators {
+ VDD_APC0: s8 {
+ regulator-min-microvolt = <680000>;
+ regulator-max-microvolt = <1180000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */
+ VDD_APC1: s11 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1225000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 58fe58cc7703..750643763a76 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -10,8 +10,30 @@
/delete-node/ &cpu6_map;
/delete-node/ &cpu7_map;
+&gcc {
+ compatible = "qcom,gcc-msm8992";
+};
+
+&mmcc {
+ compatible = "qcom,mmcc-msm8992";
+
+ assigned-clock-rates = <800000000>,
+ <808000000>,
+ <1020000000>,
+ <960000000>,
+ <800000000>;
+};
+
+&ocmem {
+ reg = <0xfdd00000 0x2000>, <0xfec00000 0x100000>;
+
+ gmu-sram@0 {
+ reg = <0x0 0x80000>;
+ };
+};
+
&rpmcc {
- compatible = "qcom,rpmcc-msm8992";
+ compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
};
&tcsr_mutex {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 0e3dd48f0dbf..dbfbb77e9ff5 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2015, Huawei Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
- * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
+ * Copyright (c) 2021-2022, Petr Vorel <petr.vorel@gmail.com>
*/
/dts-v1/;
@@ -27,17 +27,20 @@
chosen {
stdout-path = "serial0:115200n8";
};
+};
- soc {
- serial@f991e000 {
- status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- };
- };
+&blsp1_uart2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
};
&tlmm {
gpio-reserved-ranges = <85 4>;
};
+
+&sdhc1 {
+ status = "okay";
+ mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index dde7ed159c4d..e5a45af0bd12 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -108,13 +108,6 @@
/* NXP PN547 NFC */
};
-&blsp1_i2c4 {
- status = "okay";
- clock-frequency = <355000>;
-
- /* Empty but active */
-};
-
&blsp1_i2c6 {
status = "okay";
clock-frequency = <355000>;
@@ -194,26 +187,38 @@
};
&rpm_requests {
+ /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_bst_byp-supply = <&vph_pwr>;
+
+ pmi8994_s1: s1 {
+ regulator-min-microvolt = <1025000>;
+ regulator-max-microvolt = <1025000>;
+ };
+
+ /* S2 & S3 - VDD_GFX */
+
+ pmi8994_bby: boost-bypass {
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+
pm8994_regulators: pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
vdd_s3-supply = <&vph_pwr>;
vdd_s4-supply = <&vph_pwr>;
vdd_s5-supply = <&vph_pwr>;
vdd_s6-supply = <&vph_pwr>;
vdd_s7-supply = <&vph_pwr>;
- vdd_s8-supply = <&vph_pwr>;
- vdd_s9-supply = <&vph_pwr>;
- vdd_s10-supply = <&vph_pwr>;
- vdd_s11-supply = <&vph_pwr>;
- vdd_s12-supply = <&vph_pwr>;
vdd_l1-supply = <&pmi8994_s1>;
vdd_l2_l26_l28-supply = <&pm8994_s3>;
vdd_l3_l11-supply = <&pm8994_s3>;
vdd_l4_l27_l31-supply = <&pm8994_s3>;
- vdd_l5_l7-supply = <&pm8994_s5>;
vdd_l6_l12_l32-supply = <&pm8994_s5>;
vdd_l8_l16_l30-supply = <&vph_pwr>;
vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>;
@@ -234,9 +239,9 @@
pm8994_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-system-load = <325000>;
regulator-allow-set-load;
regulator-always-on;
- regulator-system-load = <325000>;
};
pm8994_s5: s5 {
@@ -262,13 +267,14 @@
pm8994_l2: l2 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l3: l3 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
};
pm8994_l4: l4 {
@@ -308,8 +314,8 @@
pm8994_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l13: l13 {
@@ -320,8 +326,9 @@
pm8994_l14: l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
+ regulator-boot-on;
};
pm8994_l15: l15 {
@@ -337,44 +344,47 @@
pm8994_l17: l17 {
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
+ regulator-boot-on;
};
pm8994_l18: l18 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
+ regulator-boot-on;
};
pm8994_l19: l19 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+ regulator-boot-on;
};
pm8994_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-allow-set-load;
regulator-system-load = <570000>;
+ regulator-allow-set-load;
};
pm8994_l21: l21 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-allow-set-load;
regulator-system-load = <800000>;
+ regulator-allow-set-load;
};
pm8994_l22: l22 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
};
pm8994_l23: l23 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
pm8994_l24: l24 {
@@ -385,6 +395,7 @@
pm8994_l25: l25 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
};
pm8994_l26: l26 {
@@ -395,30 +406,33 @@
pm8994_l27: l27 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
};
pm8994_l28: l28 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l29: l29 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
+ regulator-boot-on;
};
pm8994_l30: l30 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
};
pm8994_l31: l31 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-allow-set-load;
regulator-system-load = <10000>;
+ regulator-allow-set-load;
};
pm8994_l32: l32 {
@@ -426,26 +440,11 @@
regulator-max-microvolt = <1800000>;
};
- pm8994_lvs1: lvs1 {};
- pm8994_lvs2: lvs2 {};
- };
-
- pmi8994_regulators: pmi8994-regulators {
- compatible = "qcom,rpm-pmi8994-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_bst_byp-supply = <&vph_pwr>;
-
- pmi8994_s1: s1 {
- regulator-min-microvolt = <1025000>;
- regulator-max-microvolt = <1025000>;
+ pm8994_lvs1: lvs1 {
+ regulator-boot-on;
};
-
- /* S2 & S3 - VDD_GFX */
-
- pmi8994_bby: boost-bypass {
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3600000>;
+ pm8994_lvs2: lvs2 {
+ regulator-boot-on;
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 8c1dc5155b71..367ed913902c 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -4,6 +4,8 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8994.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
/ {
@@ -12,6 +14,11 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ mmc1 = &sdhc1;
+ mmc2 = &sdhc2;
+ };
+
chosen { };
clocks {
@@ -183,8 +190,8 @@
no-map;
};
- cont_splash_mem: memory@3800000 {
- reg = <0 0x03800000 0 0x2400000>;
+ cont_splash_mem: memory@3401000 {
+ reg = <0 0x03401000 0 0x2200000>;
no-map;
};
@@ -233,7 +240,6 @@
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
- qcom,local-pid = <0>;
qcom,remote-pid = <6>;
rpm_requests: rpm-requests {
@@ -241,7 +247,7 @@
qcom,smd-channels = "rpm_requests";
rpmcc: rpmcc {
- compatible = "qcom,rpmcc-msm8994";
+ compatible = "qcom,rpmcc-msm8994", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -354,6 +360,15 @@
#mbox-cells = <1>;
};
+ watchdog@f9017000 {
+ compatible = "qcom,apss-wdt-msm8994", "qcom,kpss-wdt";
+ reg = <0xf9017000 0x1000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&sleep_clk>;
+ timeout-sec = <10>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -498,7 +513,7 @@
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
- num-channels = <18>;
+ num-channels = <24>;
qcom,num-ees = <4>;
};
@@ -519,9 +534,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9923000 0x500>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
dma-names = "tx", "rx";
@@ -555,9 +570,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
dma-names = "tx", "rx";
@@ -575,9 +590,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9926000 0x500>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 18>, <&blsp1_dma 19>;
dma-names = "tx", "rx";
@@ -593,9 +608,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9927000 0x500>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
@@ -611,9 +626,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9928000 0x500>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
dma-names = "tx", "rx";
@@ -634,7 +649,7 @@
#dma-cells = <1>;
qcom,ee = <0>;
qcom,controlled-remotely;
- num-channels = <18>;
+ num-channels = <24>;
qcom,num-ees = <4>;
};
@@ -657,9 +672,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9963000 0x500>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
dma-names = "tx", "rx";
@@ -693,9 +708,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9967000 0x500>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <355000>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
@@ -714,7 +729,7 @@
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
- clock-names = "xo", "sleep_clk";
+ clock-names = "xo", "sleep";
clocks = <&xo_board>, <&sleep_clk>;
};
@@ -1012,6 +1027,61 @@
drive-strength = <2>;
};
};
+
+ mmcc: clock-controller@fd8c0000 {
+ compatible = "qcom,mmcc-msm8994";
+ reg = <0xfd8c0000 0x5200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ clock-names = "xo",
+ "gpll0",
+ "mmssnoc_ahb",
+ "oxili_gfx3d_clk_src",
+ "dsi0pll",
+ "dsi0pllbyte",
+ "dsi1pll",
+ "dsi1pllbyte",
+ "hdmipll";
+ clocks = <&xo_board>,
+ <&gcc GPLL0_OUT_MMSSCC>,
+ <&rpmcc RPM_SMD_MMSSNOC_AHB_CLK>,
+ <&rpmcc RPM_SMD_GFX3D_CLK_SRC>,
+ <0>,
+ <0>,
+ <0>,
+ <0>,
+ <0>;
+
+ assigned-clocks = <&mmcc MMPLL0_PLL>,
+ <&mmcc MMPLL1_PLL>,
+ <&mmcc MMPLL3_PLL>,
+ <&mmcc MMPLL4_PLL>,
+ <&mmcc MMPLL5_PLL>;
+ assigned-clock-rates = <800000000>,
+ <1167000000>,
+ <1020000000>,
+ <960000000>,
+ <600000000>;
+ };
+
+ ocmem: ocmem@fdd00000 {
+ compatible = "qcom,msm8974-ocmem";
+ reg = <0xfdd00000 0x2000>,
+ <0xfec00000 0x200000>;
+ reg-names = "ctrl", "mem";
+ clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+ <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+ clock-names = "core", "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gmu_sram: gmu-sram@0 {
+ reg = <0x0 0x180000>;
+ };
+ };
};
timer: timer {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
index 6a1699a96c99..596ad4c896f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -18,12 +18,10 @@
chosen {
stdout-path = "serial0";
};
+};
- soc {
- serial@75b0000 {
- status = "okay";
- };
- };
+&blsp2_uart2 {
+ status = "okay";
};
&hdmi {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index 3bb50cecd62d..ca3c633f5a45 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -13,9 +13,10 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-/delete-node/ &slpi_region;
-/delete-node/ &venus_region;
-/delete-node/ &zap_shader_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &gpu_mem;
/ {
qcom,msm-id = <246 0x30001>; /* MSM8996 V3.1 (Final) */
@@ -46,18 +47,23 @@
no-map;
};
- zap_shader_region: gpu@90400000 {
+ adsp_mem: adsp@8ea00000 {
+ reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+ no-map;
+ };
+
+ gpu_mem: gpu@90400000 {
compatible = "shared-dma-pool";
reg = <0x0 0x90400000 0x0 0x2000>;
no-map;
};
- slpi_region: memory@90500000 {
+ slpi_mem: memory@90500000 {
reg = <0 0x90500000 0 0xa00000>;
no-map;
};
- venus_region: memory@90f00000 {
+ venus_mem: memory@90f00000 {
reg = <0 0x90f00000 0 0x500000>;
no-map;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 7a9fcbe9bb31..be4f643b1fd1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -66,32 +66,32 @@
/* This platform has all PIL regions offset by 0x1400000 */
/delete-node/ mpss@88800000;
- mpss_region: mpss@89c00000 {
+ mpss_mem: mpss@89c00000 {
reg = <0x0 0x89c00000 0x0 0x6200000>;
no-map;
};
/delete-node/ adsp@8ea00000;
- adsp_region: adsp@8ea00000 {
+ adsp_mem: adsp@8fe00000 {
reg = <0x0 0x8fe00000 0x0 0x1b00000>;
no-map;
};
- /delete-node/ slpi@90b00000;
- slpi_region: slpi@91900000 {
+ /delete-node/ slpi@90500000;
+ slpi_mem: slpi@91900000 {
reg = <0x0 0x91900000 0x0 0xa00000>;
no-map;
};
- /delete-node/ gpu@8f200000;
- zap_shader_region: gpu@92300000 {
+ /delete-node/ gpu@90f00000;
+ gpu_mem: gpu@92300000 {
compatible = "shared-dma-pool";
reg = <0x0 0x92300000 0x0 0x2000>;
no-map;
};
/delete-node/ venus@91000000;
- venus_region: venus@90400000 {
+ venus_mem: venus@92400000 {
reg = <0x0 0x92400000 0x0 0x500000>;
no-map;
};
@@ -107,7 +107,7 @@
pmsg-size = <0x40000>;
};
- /delete-node/ rmtfs@86700000;
+ /delete-node/ rmtfs;
rmtfs@f6c00000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xf6c00000 0 0x200000>;
@@ -118,7 +118,7 @@
};
/delete-node/ mba@91500000;
- mba_region: mba@f6f00000 {
+ mba_mem: mba@f6f00000 {
reg = <0x0 0xf6f00000 0x0 0x100000>;
no-map;
};
@@ -267,6 +267,12 @@
vdd-gfx-supply = <&vdd_gfx>;
};
+&mss_pil {
+ status = "okay";
+
+ pll-supply = <&vreg_l12a_1p8>;
+};
+
&pcie0 {
status = "okay";
@@ -291,6 +297,12 @@
linux,code = <KEY_VOLUMEDOWN>;
};
+&slpi_pil {
+ status = "okay";
+
+ px-supply = <&vreg_lvs2a_1p8>;
+};
+
&usb3 {
status = "okay";
extcon = <&typec>;
@@ -336,13 +348,7 @@
vdda-phy-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
vddp-ref-clk-supply = <&vreg_l25a_1p2>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
};
&venus {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index 34f82e06ef53..22978d06f85b 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -130,6 +130,11 @@
status = "okay";
};
+&mss_pil {
+ firmware-name = "qcom/msm8996/gemini/mba.mbn",
+ "qcom/msm8996/gemini/modem.mbn";
+};
+
&q6asmdai {
dai@0 {
reg = <0>;
@@ -144,6 +149,10 @@
};
};
+&slpi_pil {
+ firmware-name = "qcom/msm8996/gemini/slpi.mbn";
+};
+
&sound {
compatible = "qcom,apq8096-sndcard";
model = "gemini";
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
index 27a45ddbb5bd..1e2dd6763ad1 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts
@@ -111,6 +111,11 @@
status = "disabled";
};
+&mss_pil {
+ firmware-name = "qcom/msm8996/scorpio/mba.mbn",
+ "qcom/msm8996/scorpio/modem.mbn";
+};
+
&q6asmdai {
dai@0 {
reg = <0>;
@@ -125,6 +130,10 @@
};
};
+&slpi_pil {
+ firmware-name = "qcom/msm8996/scorpio/slpi.mbn";
+};
+
&sound {
compatible = "qcom,apq8096-sndcard";
model = "scorpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b9a48cfd760f..205af7b479a8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -384,60 +384,65 @@
#size-cells = <2>;
ranges;
- mba_region: mba@91500000 {
- reg = <0x0 0x91500000 0x0 0x200000>;
+ hyp_mem: memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x600000>;
no-map;
};
- slpi_region: slpi@90b00000 {
- reg = <0x0 0x90b00000 0x0 0xa00000>;
+ xbl_mem: memory@85e00000 {
+ reg = <0x0 0x85e00000 0x0 0x200000>;
no-map;
};
- venus_region: venus@90400000 {
- reg = <0x0 0x90400000 0x0 0x700000>;
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
- adsp_region: adsp@8ea00000 {
- reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+ tz_mem: memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
no-map;
};
- mpss_region: mpss@88800000 {
- reg = <0x0 0x88800000 0x0 0x6200000>;
+ rmtfs_mem: rmtfs {
+ compatible = "qcom,rmtfs-mem";
+
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
};
- smem_mem: smem-mem@86000000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
+ mpss_mem: mpss@88800000 {
+ reg = <0x0 0x88800000 0x0 0x6200000>;
no-map;
};
- memory@85800000 {
- reg = <0x0 0x85800000 0x0 0x800000>;
+ adsp_mem: adsp@8ea00000 {
+ reg = <0x0 0x8ea00000 0x0 0x1b00000>;
no-map;
};
- memory@86200000 {
- reg = <0x0 0x86200000 0x0 0x2600000>;
+ slpi_mem: slpi@90500000 {
+ reg = <0x0 0x90500000 0x0 0xa00000>;
no-map;
};
- rmtfs@86700000 {
- compatible = "qcom,rmtfs-mem";
-
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ gpu_mem: gpu@90f00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90f00000 0x0 0x100000>;
no-map;
+ };
- qcom,client-id = <1>;
- qcom,vmid = <15>;
+ venus_mem: venus@91000000 {
+ reg = <0x0 0x91000000 0x0 0x500000>;
+ no-map;
};
- zap_shader_region: gpu@8f200000 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x90b00000 0x0 0xa00000>;
+ mba_mem: mba@91500000 {
+ reg = <0x0 0x91500000 0x0 0x200000>;
no-map;
};
};
@@ -456,7 +461,7 @@
qcom,glink-channels = "rpm_requests";
rpmcc: qcom,rpmcc {
- compatible = "qcom,rpmcc-msm8996";
+ compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -513,12 +518,12 @@
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
- smp2p_adsp_out: master-kernel {
+ adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
- smp2p_adsp_in: slave-kernel {
+ adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
@@ -526,7 +531,7 @@
};
};
- smp2p-modem {
+ smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
@@ -537,12 +542,12 @@
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
- modem_smp2p_out: master-kernel {
+ mpss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
- modem_smp2p_in: slave-kernel {
+ mpss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
@@ -561,16 +566,17 @@
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
- smp2p_slpi_in: slave-kernel {
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
+
interrupt-controller;
#interrupt-cells = <2>;
};
-
- smp2p_slpi_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
};
soc: soc {
@@ -707,7 +713,7 @@
#thermal-sensor-cells = <1>;
};
- cryptobam: dma@644000 {
+ cryptobam: dma-controller@644000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x00644000 0x24000>;
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
@@ -788,7 +794,7 @@
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
clocks = <&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_AXI_CLK>,
@@ -834,7 +840,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
@@ -904,7 +910,7 @@
"hdcp_physical";
interrupt-parent = <&mdss>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <8>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_AHB_CLK>,
@@ -1033,7 +1039,7 @@
};
zap-shader {
- memory-region = <&zap_shader_region>;
+ memory-region = <&gpu_mem>;
};
};
@@ -1574,7 +1580,7 @@
ranges;
pcie0: pcie@600000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
status = "disabled";
power-domains = <&gcc PCIE0_GDSC>;
bus-range = <0x00 0xff>;
@@ -1626,7 +1632,7 @@
};
pcie1: pcie@608000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
power-domains = <&gcc PCIE1_GDSC>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
@@ -1679,7 +1685,7 @@
};
pcie2: pcie@610000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ compatible = "qcom,pcie-msm8996";
power-domains = <&gcc PCIE2_GDSC>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
@@ -1730,7 +1736,8 @@
};
ufshc: ufshc@624000 {
- compatible = "qcom,ufshc";
+ compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
@@ -2026,7 +2033,7 @@
<&venus_smmu 0x2c>,
<&venus_smmu 0x2d>,
<&venus_smmu 0x31>;
- memory-region = <&venus_region>;
+ memory-region = <&venus_mem>;
status = "disabled";
video-decoder {
@@ -2122,6 +2129,105 @@
clock-names = "iface", "bus";
};
+ slpi_pil: remoteproc@1c00000 {
+ compatible = "qcom,msm8996-slpi-pil";
+ reg = <0x01c00000 0x4000>;
+
+ interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ clocks = <&xo_board>,
+ <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ clock-names = "xo", "aggre2";
+
+ memory-region = <&slpi_mem>;
+
+ qcom,smem-states = <&slpi_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ power-domains = <&rpmpd MSM8996_VDDSSCX>;
+ power-domain-names = "ssc_cx";
+
+ status = "disabled";
+
+ smd-edge {
+ interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+ label = "dsps";
+ mboxes = <&apcs_glb 25>;
+ qcom,smd-edge = <3>;
+ qcom,remote-pid = <3>;
+ };
+ };
+
+ mss_pil: remoteproc@2080000 {
+ compatible = "qcom,msm8996-mss-pil";
+ reg = <0x2080000 0x100>,
+ <0x2180000 0x020>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&xo_board>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>;
+ clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ power-domains = <&rpmpd MSM8996_VDDCX>,
+ <&rpmpd MSM8996_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ qcom,smem-states = <&mpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ status = "disabled";
+
+ mba {
+ memory-region = <&mba_mem>;
+ };
+
+ mpss {
+ memory-region = <&mpss_mem>;
+ };
+
+ smd-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+
+ label = "mpss";
+ mboxes = <&apcs_glb 12>;
+ qcom,smd-edge = <0>;
+ qcom,remote-pid = <1>;
+ };
+ };
+
stm@3002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0x3002000 0x1000>,
@@ -2786,9 +2892,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07577000 0x1000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_i2c3_default>;
pinctrl-1 = <&blsp1_i2c3_sleep>;
@@ -2834,9 +2940,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c1_default>;
pinctrl-1 = <&blsp2_i2c1_sleep>;
@@ -2851,9 +2957,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c2_default>;
pinctrl-1 = <&blsp2_i2c2_sleep>;
@@ -2868,9 +2974,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b7000 0x1000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c3_default>;
@@ -2886,9 +2992,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x75b9000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_i2c5_default>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
@@ -2902,9 +3008,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x75ba000 0x1000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c6_default>;
pinctrl-1 = <&blsp2_i2c6_sleep>;
@@ -3023,19 +3129,19 @@
reg = <0x09300000 0x80000>;
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
- <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&rpmcc RPM_SMD_BB_CLK1>;
clock-names = "xo";
- memory-region = <&adsp_region>;
+ memory-region = <&adsp_mem>;
- qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
power-domains = <&rpmpd MSM8996_VDDCX>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 9823d48a91b1..dbaea360bffc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -188,6 +188,23 @@
};
};
+&blsp1_i2c6 {
+ status = "okay";
+
+ nfc@28 {
+ compatible = "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
+ };
+};
+
&blsp1_uart3 {
status = "okay";
@@ -462,6 +479,20 @@
drive-strength = <8>;
bias-pull-up;
};
+
+ nfc_int_active: nfc-int-active {
+ pins = "gpio92";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ nfc_enable_active: nfc-enable-active {
+ pins = "gpio12", "gpio116";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
};
&ufshc {
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 2fda21e810c9..4a84de6cee1e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -815,6 +815,21 @@
clock-names = "xo", "sleep_clk";
clocks = <&xo>, <&sleep_clk>;
+
+ /*
+ * The hypervisor typically configures the memory region where these clocks
+ * reside as read-only for the HLOS. If the HLOS tried to enable or disable
+ * these clocks on a device with such configuration (e.g. because they are
+ * enabled but unused during boot-up), the device will most likely decide
+ * to reboot.
+ * In light of that, we are conservative here and we list all such clocks
+ * as protected. The board dts (or a user-supplied dts) can override the
+ * list of protected clocks if it differs from the norm, and it is in fact
+ * desired for the HLOS to manage these clocks
+ */
+ protected-clocks = <AGGRE2_SNOC_NORTH_AXI>,
+ <SSC_XO>,
+ <SSC_CNOC_AHBS_CLK>;
};
rpm_msg_ram: sram@778000 {
diff --git a/arch/arm64/boot/dts/qcom/pm8350.dtsi b/arch/arm64/boot/dts/qcom/pm8350.dtsi
index 308f9ca7c744..b10f33afa5e3 100644
--- a/arch/arm64/boot/dts/qcom/pm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350.dtsi
@@ -6,6 +6,30 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+/ {
+ thermal-zones {
+ pm8350_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350_temp_alarm>;
+
+ trips {
+ pm8350_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm8350_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pm8350: pmic@1 {
compatible = "qcom,pm8350", "qcom,spmi-pmic";
@@ -13,6 +37,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8350_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pm8350_gpios: gpio@8800 {
compatible = "qcom,pm8350-gpio";
reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350b.dtsi b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
index b23bb1d49a4d..f1d1d4c8edf8 100644
--- a/arch/arm64/boot/dts/qcom/pm8350b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350b.dtsi
@@ -6,6 +6,30 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+/ {
+ thermal-zones {
+ pm8350b_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350b_temp_alarm>;
+
+ trips {
+ pm8350b_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pm8350b_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pm8350b: pmic@3 {
compatible = "qcom,pm8350b", "qcom,spmi-pmic";
@@ -13,6 +37,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ pm8350b_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pm8350b_gpios: gpio@8800 {
compatible = "qcom,pm8350b-gpio";
reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
index e1b75ae0a823..e0bbb67717fe 100644
--- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
@@ -29,26 +29,35 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ pm8350c_pwm: pwm@e800 {
+ compatible = "qcom,pm8350c-pwm";
+ reg = <0xe800>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
};
};
-&thermal_zones {
- pm8350c_thermal: pm8350c-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
- thermal-sensors = <&pm8350c_temp_alarm>;
-
- trips {
- pm8350c_trip0: trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+/ {
+ thermal-zones {
+ pm8350c_thermal: pm8350c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm8350c_temp_alarm>;
+
+ trips {
+ pm8350c_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- pm8350c_crit: pm8350c-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
+ pm8350c_crit: pm8350c-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8450.dtsi b/arch/arm64/boot/dts/qcom/pm8450.dtsi
new file mode 100644
index 000000000000..ae5bce3cf46e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8450.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ thermal-zones {
+ pm8450-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8450_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+ };
+};
+
+
+&spmi_bus {
+ pm8450: pmic@7 {
+ compatible = "qcom,pm8450", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8450_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8450_gpios: gpio@8800 {
+ compatible = "qcom,pm8450-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pm8450_gpios 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
index b4b6ba24f845..febda50779f9 100644
--- a/arch/arm64/boot/dts/qcom/pmr735a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
@@ -32,23 +32,25 @@
};
};
-&thermal_zones {
- pmr735a_thermal: pmr735a-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
- thermal-sensors = <&pmr735a_temp_alarm>;
+/ {
+ thermal-zones {
+ pmr735a_thermal: pmr735a-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmr735a_temp_alarm>;
- trips {
- pmr735a_trip0: trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ pmr735a_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
- pmr735a_crit: pmr735a-crit {
- temperature = <115000>;
- hysteresis = <0>;
- type = "critical";
+ pmr735a_crit: pmr735a-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmr735b.dtsi b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
index 1144086280f5..604324188603 100644
--- a/arch/arm64/boot/dts/qcom/pmr735b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735b.dtsi
@@ -6,6 +6,30 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+/ {
+ thermal-zones {
+ pmr735a_thermal: pmr735a-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+ thermal-sensors = <&pmr735b_temp_alarm>;
+
+ trips {
+ pmr735b_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pmr735b_crit: pmr735a-crit {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
&spmi_bus {
pmr735b: pmic@5 {
compatible = "qcom,pmr735b", "qcom,spmi-pmic";
@@ -13,6 +37,13 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmr735b_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
pmr735b_gpios: gpio@8800 {
compatible = "qcom,pmr735b-gpio";
reg = <0x8800>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3f06f7cd3cf2..bc446c6002d0 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -226,7 +226,7 @@
qcom,glink-channels = "rpm_requests";
rpmcc: clock-controller {
- compatible = "qcom,rpmcc-qcs404";
+ compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
#clock-cells = <1>;
};
@@ -823,8 +823,8 @@
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp1_dma 1>, <&blsp1_dma 0>;
- dma-names = "rx", "tx";
+ dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart0_default>;
status = "disabled";
@@ -836,8 +836,8 @@
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp1_dma 3>, <&blsp1_dma 2>;
- dma-names = "rx", "tx";
+ dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart1_default>;
status = "disabled";
@@ -849,8 +849,8 @@
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp1_dma 5>, <&blsp1_dma 4>;
- dma-names = "rx", "tx";
+ dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart2_default>;
status = "okay";
@@ -903,8 +903,8 @@
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp1_dma 7>, <&blsp1_dma 6>;
- dma-names = "rx", "tx";
+ dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_uart3_default>;
status = "disabled";
@@ -914,9 +914,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c0_default>;
#address-cells = <1>;
@@ -928,9 +928,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi0_default>;
#address-cells = <1>;
@@ -942,9 +942,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c1_default>;
#address-cells = <1>;
@@ -956,9 +956,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi1_default>;
#address-cells = <1>;
@@ -970,9 +970,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c2_default>;
#address-cells = <1>;
@@ -984,9 +984,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi2_default>;
#address-cells = <1>;
@@ -998,9 +998,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c3_default>;
#address-cells = <1>;
@@ -1012,9 +1012,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi3_default>;
#address-cells = <1>;
@@ -1026,9 +1026,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b9000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_i2c4_default>;
#address-cells = <1>;
@@ -1040,9 +1040,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b9000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp1_spi4_default>;
#address-cells = <1>;
@@ -1067,8 +1067,8 @@
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
- dmas = <&blsp2_dma 1>, <&blsp2_dma 0>;
- dma-names = "rx", "tx";
+ dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_uart0_default>;
status = "disabled";
@@ -1078,9 +1078,9 @@
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_i2c0_default>;
#address-cells = <1>;
@@ -1092,9 +1092,9 @@
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>;
- clock-names = "iface", "core";
+ clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
pinctrl-names = "default";
pinctrl-0 = <&blsp2_spi0_default>;
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 845eb7a6bf92..0e63f707b911 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -29,7 +29,7 @@
};
/* Fixed crystal oscillator dedicated to MCP2518FD */
- clk40M: can_clock {
+ clk40M: can-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <40000000>;
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 8756c2b25c7e..ba547ca9fc6b 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -47,6 +47,29 @@
vin-supply = <&vreg_3p3>;
};
+
+ mtl_rx_setup: rx-queues-config {
+ snps,rx-queues-to-use = <1>;
+ snps,rx-sched-sp;
+
+ queue0 {
+ snps,dcb-algorithm;
+ snps,map-to-dma-channel = <0x0>;
+ snps,route-up;
+ snps,priority = <0x1>;
+ };
+ };
+
+ mtl_tx_setup: tx-queues-config {
+ snps,tx-queues-to-use = <1>;
+ snps,tx-sched-wrr;
+
+ queue0 {
+ snps,weight = <0x10>;
+ snps,dcb-algorithm;
+ snps,priority = <0x0>;
+ };
+ };
};
&apps_rsc {
@@ -303,6 +326,44 @@
};
};
+&ethernet {
+ status = "okay";
+
+ snps,reset-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 11000 70000>;
+
+ snps,ptp-ref-clk-rate = <250000000>;
+ snps,ptp-req-clk-rate = <96000000>;
+
+ snps,mtl-rx-config = <&mtl_rx_setup>;
+ snps,mtl-tx-config = <&mtl_tx_setup>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet_defaults>;
+
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ compatible = "snps,dwmac-mdio";
+
+ /* Micrel KSZ9031RNZ PHY */
+ rgmii_phy: phy@7 {
+ reg = <0x7>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
+ device_type = "ethernet-phy";
+ compatible = "ethernet-phy-ieee802.3-c22";
+ };
+ };
+};
+
&qupv3_id_1 {
status = "okay";
};
@@ -317,6 +378,20 @@
firmware-name = "qcom/sa8155p/cdsp.mdt";
};
+&sdhc_2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */
+ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */
+ bus-width = <4>;
+ no-sdio;
+ no-emmc;
+};
+
&uart2 {
status = "okay";
};
@@ -387,9 +462,78 @@
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l18c_0p88>;
+ vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l18c_0p88>;
+ vdda-pll-supply = <&vreg_l8c_1p2>;
+};
+
&tlmm {
gpio-reserved-ranges = <0 4>;
+ sdc2_on: sdc2_on {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable; /* No pull */
+ drive-strength = <16>; /* 16 MA */
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <16>; /* 16 MA */
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <16>; /* 16 MA */
+ };
+
+ sd-cd {
+ pins = "gpio96";
+ function = "gpio";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
+ sdc2_off: sdc2_off {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable; /* No pull */
+ drive-strength = <2>; /* 2 MA */
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+
+ sd-cd {
+ pins = "gpio96";
+ function = "gpio";
+ bias-pull-up; /* pull up */
+ drive-strength = <2>; /* 2 MA */
+ };
+ };
+
usb2phy_ac_en1_default: usb2phy_ac_en1_default {
mux {
pins = "gpio113";
@@ -407,4 +551,53 @@
drive-strength = <2>;
};
};
+
+ ethernet_defaults: ethernet-defaults {
+ mdc {
+ pins = "gpio7";
+ function = "rgmii";
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio59";
+ function = "rgmii";
+ bias-pull-up;
+ };
+
+ rgmii-rx {
+ pins = "gpio117", "gpio118", "gpio119", "gpio120", "gpio115", "gpio116";
+ function = "rgmii";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ rgmii-tx {
+ pins = "gpio122", "gpio4", "gpio5", "gpio6", "gpio114", "gpio121";
+ function = "rgmii";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ phy-intr {
+ pins = "gpio124";
+ function = "emac_phy";
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pps {
+ pins = "gpio81";
+ function = "emac_pps";
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ phy-reset {
+ pins = "gpio79";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index c81805ef2250..8ac1f1e61006 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -5,15 +5,10 @@
* Copyright 2020 Google LLC.
*/
-#include "sc7180.dtsi"
-
-ap_ec_spi: &spi6 {};
-ap_h1_spi: &spi0 {};
-
#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
-/* Deleted nodes from trogdor.dtsi */
+/* Deleted nodes from sc7180-trogdor.dtsi */
/delete-node/ &alc5682;
/delete-node/ &pp3300_codec;
@@ -111,10 +106,6 @@ ap_ts_pen_1v8: &i2c4 {
};
};
-&i2c7 {
- status = "disabled";
-};
-
&i2c9 {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
index 70032983fb65..d9e905ed4e62 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-homestar.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
index e92e2e9e48ed..242c178fdc52 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-homestar.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
index 0de0c97f5728..66dd87016201 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r4.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-homestar.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index bff2b556cc75..9b3e3d13c165 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -5,9 +5,6 @@
* Copyright 2021 Google LLC.
*/
-ap_ec_spi: &spi6 {};
-ap_h1_spi: &spi0 {};
-
#include "sc7180-trogdor.dtsi"
/ {
@@ -88,10 +85,6 @@ ap_h1_spi: &spi0 {};
};
};
-&ap_tp_i2c {
- status = "disabled";
-};
-
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
index f360ff27226e..235cda2bba5e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r5.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
index 4e35aec6a1e5..913b5fc3ba76 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r9.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
@@ -20,7 +20,7 @@
/delete-node/&ap_ts;
&panel {
- compatible = "innolux,n116bca-ea1", "innolux,n116bge";
+ compatible = "edp-panel";
};
&sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
index 42b4bbcc76f4..d42dcd421146 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r4.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
index dc47842bc662..15d77dc5f956 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r9.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index b142006478ea..bfbf26fd2cd4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
index e16ba7b01f25..eb20157f6af9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts
@@ -13,10 +13,6 @@
compatible = "google,lazor-rev1-sku0", "google,lazor-rev2-sku0", "qcom,sc7180";
};
-&ap_sar_sensor {
- status = "okay";
-};
-
&ap_sar_sensor_i2c {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index 59740799fa3a..d45a59afd7fc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
index 18ef9da71998..6ff81c1f7c44 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-kb.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
index c5c9feff41b8..e58e36e35950 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3-lte.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
@@ -20,10 +20,6 @@
"qcom,sc7180";
};
-&ap_sar_sensor {
- status = "okay";
-};
-
&ap_sar_sensor_i2c {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
index 7adcedbf080d..76c83f88cb41 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r3.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
index 7f5c015e1ecb..960f7b7ce094 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-kb.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
index 344b57c035d0..38027f13b9d0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9-lte.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-trogdor-lte-sku.dtsi"
@@ -17,10 +17,6 @@
compatible = "google,lazor-sku0", "qcom,sc7180";
};
-&ap_sar_sensor {
- status = "okay";
-};
-
&ap_sar_sensor_i2c {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
index 83f6a4eb5ae5..56dd222650d3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r9.dts
@@ -7,7 +7,7 @@
/dts-v1/;
-#include "sc7180.dtsi"
+#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-parade-ps8640.dtsi"
#include "sc7180-trogdor-lazor.dtsi"
#include "sc7180-lite.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 69666f92176a..fe2369c29aad 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -5,9 +5,6 @@
* Copyright 2020 Google LLC.
*/
-ap_ec_spi: &spi6 {};
-ap_h1_spi: &spi0 {};
-
#include "sc7180-trogdor.dtsi"
&ap_sar_sensor {
@@ -19,6 +16,10 @@ ap_h1_spi: &spi0 {};
semtech,avg-pos-strength = <64>;
};
+&ap_tp_i2c {
+ status = "okay";
+};
+
/*
* Lazor is stuffed with a 47k NTC as charger thermistor which currently is
* not supported by the PM6150 ADC driver. Disable the charger thermal zone
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
index e47c74e513af..3df4920295ad 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
@@ -5,11 +5,6 @@
* Copyright 2020 Google LLC.
*/
-#include "sc7180.dtsi"
-
-ap_ec_spi: &spi6 {};
-ap_h1_spi: &spi0 {};
-
#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
@@ -36,6 +31,10 @@ ap_h1_spi: &spi0 {};
realtek,dmic-clk-driving-high;
};
+&ap_tp_i2c {
+ status = "okay";
+};
+
&cpu6_alert0 {
temperature = <60000>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 457c25499863..352827e5740a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -7,11 +7,6 @@
/dts-v1/;
-#include "sc7180.dtsi"
-
-ap_ec_spi: &spi6 {};
-ap_h1_spi: &spi0 {};
-
#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
@@ -20,6 +15,10 @@ ap_h1_spi: &spi0 {};
compatible = "google,trogdor", "qcom,sc7180";
};
+&ap_tp_i2c {
+ status = "okay";
+};
+
ap_ts_pen_1v8: &i2c4 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 732e1181af48..e55dbaa6dc12 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -11,7 +11,8 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/sc7180-lpass.h>
-/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "sc7180.dtsi"
+/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
@@ -626,7 +627,7 @@
};
};
-&ap_ec_spi {
+ap_ec_spi: &spi6 {
status = "okay";
cros_ec: ec@0 {
compatible = "google,cros-ec-spi";
@@ -675,7 +676,7 @@
};
};
-&ap_h1_spi {
+ap_h1_spi: &spi0 {
status = "okay";
cr50: tpm@0 {
compatible = "google,cr50";
@@ -722,13 +723,11 @@ ap_sar_sensor_i2c: &i2c5 {
vdd-supply = <&pp3300_a>;
svdd-supply = <&pp1800_prox>;
- status = "disabled";
label = "proximity-wifi";
};
};
ap_tp_i2c: &i2c7 {
- status = "okay";
clock-frequency = <400000>;
trackpad: trackpad@15 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e1c46b80f14a..82fa009e540f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1421,13 +1421,6 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
- ipa_virt: interconnect@1e00000 {
- compatible = "qcom,sc7180-ipa-virt";
- reg = <0 0x01e00000 0 0x1000>;
- #interconnect-cells = <2>;
- qcom,bcm-voters = <&apps_bcm_voter>;
- };
-
ipa: ipa@1e40000 {
compatible = "qcom,sc7180-ipa";
@@ -3522,7 +3515,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index e2efbdde53a3..344338ad8a01 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -11,8 +11,11 @@
#include "sc7280-idp-ec-h1.dtsi"
/ {
- model = "Qualcomm Technologies, Inc. sc7280 CRD platform";
- compatible = "qcom,sc7280-crd", "google,hoglin", "qcom,sc7280";
+ model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)";
+ compatible = "qcom,sc7280-crd",
+ "google,hoglin-rev3", "google,hoglin-rev4",
+ "google,piglin-rev3", "google,piglin-rev4",
+ "qcom,sc7280";
aliases {
serial0 = &uart5;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
new file mode 100644
index 000000000000..a4ac33c4fd59
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 CRD 3+ board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sc7280 CRD platform (rev5+)";
+ compatible = "google,hoglin", "qcom,sc7280";
+
+ /* FIXED REGULATORS */
+
+ /*
+ * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL.
+ * However, on CRD there's an extra regulator in the way. Since this
+ * is expected to be uncommon, we'll leave the "vreg_edp_bl" label
+ * in the baseboard herobrine.dtsi point at "ppvar_sys" and then
+ * make a "_crd" specific version here.
+ */
+ vreg_edp_bl_crd: vreg-edp-bl-crd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_edp_bl_crd";
+
+ gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&apps_rsc {
+ pmg1110-regulators {
+ compatible = "qcom,pmg1110-rpmh-regulators";
+ qcom,pmic-id = "k";
+
+ vreg_s1k_1p0: smps1 {
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+ };
+};
+
+ap_tp_i2c: &i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <20>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_z1>;
+
+ wakeup-source;
+ };
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
+
+&ap_sar_sensor0 {
+ status = "okay";
+};
+
+&ap_sar_sensor1 {
+ status = "okay";
+};
+
+ap_ts_pen_1v8: &i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@5c {
+ compatible = "hid-over-i2c";
+ reg = <0x5c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ post-power-on-delay-ms = <500>;
+ hid-descr-addr = <0x0000>;
+
+ vdd-supply = <&pp3300_left_in_mlb>;
+ };
+};
+
+&mdss_edp {
+ status = "okay";
+};
+
+&mdss_edp_phy {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+ status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+ power-supply = <&vreg_edp_bl_crd>;
+};
+
+/* For eMMC */
+&sdhc_1 {
+ status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+ status = "okay";
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to CRD board and is named it gets that name.
+ * - If a pin goes to CRD board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+ gpio-line-names = "FLASH_STROBE_1", /* 1 */
+ "AP_SUSPEND",
+ "PM8008_1_RST_N",
+ "",
+ "",
+ "EDP_BL_REG_EN",
+ "PMIC_EDP_BL_EN",
+ "PMIC_EDP_BL_PWM",
+ "";
+
+ edp_bl_reg_en: edp-bl-reg-en {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
+&tlmm {
+ gpio-line-names = "AP_TP_I2C_SDA", /* 0 */
+ "AP_TP_I2C_SCL",
+ "PCIE1_RESET_N",
+ "PCIE1_WAKE_N",
+ "APPS_I2C_SDA",
+ "APPS_I2C_SCL",
+ "",
+ "TPAD_INT_N",
+ "",
+ "",
+
+ "GNSS_L1_EN", /* 10 */
+ "GNSS_L5_EN",
+ "QSPI_DATA_0",
+ "QSPI_DATA_1",
+ "QSPI_CLK",
+ "QSPI_CS_N_1",
+ /*
+ * AP_FLASH_WP is crossystem ABI. Schematics call it
+ * BIOS_FLASH_WP_L (the '_L' suffix is misleading, the
+ * signal is active high).
+ */
+ "AP_FLASH_WP",
+ "",
+ "AP_EC_INT_N",
+ "",
+
+ "CAM0_RST_N", /* 20 */
+ "CAM1_RST_N",
+ "SM_DBG_UART_TX",
+ "SM_DBG_UART_RX",
+ "",
+ "PM8008_IRQ_1",
+ "HOST2WLAN_SOL",
+ "WLAN2HOST_SOL",
+ "MOS_BT_UART_CTS",
+ "MOS_BT_UART_RFR",
+
+ "MOS_BT_UART_TX", /* 30 */
+ "MOS_BT_UART_RX",
+ "",
+ "HUB_RST",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "EC_SPI_MISO_GPIO40", /* 40 */
+ "EC_SPI_MOSI_GPIO41",
+ "EC_SPI_CLK_GPIO42",
+ "EC_SPI_CS_GPIO43",
+ "",
+ "EARLY_EUD_EN",
+ "",
+ "DP_HOT_PLUG_DETECT",
+ "AP_BRD_ID_0",
+ "AP_BRD_ID_1",
+
+ "AP_BRD_ID_2", /* 50 */
+ "NVME_PWR_REG_EN",
+ "TS_I2C_SDA_CONN",
+ "TS_I2C_CLK_CONN",
+ "TS_RST_CONN",
+ "TS_INT_CONN",
+ "AP_I2C_TPM_SDA",
+ "AP_I2C_TPM_SCL",
+ "",
+ "",
+
+ "EDP_HOT_PLUG_DET_N", /* 60 */
+ "",
+ "",
+ "AMP_EN",
+ "CAM0_MCLK_GPIO_64",
+ "CAM1_MCLK_GPIO_65",
+ "",
+ "",
+ "",
+ "CCI_I2C_SDA0",
+
+ "CCI_I2C_SCL0", /* 70 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "PCIE1_CLK_REQ_N",
+
+ "EN_PP3300_DX_EDP", /* 80 */
+ "US_EURO_HS_SEL",
+ "FORCED_USB_BOOT",
+ "WCD_RESET_N",
+ "MOS_WLAN_EN",
+ "MOS_BT_EN",
+ "MOS_SW_CTRL",
+ "MOS_PCIE0_RST",
+ "MOS_PCIE0_CLKREQ_N",
+ "MOS_PCIE0_WAKE_N",
+
+ "MOS_LAA_AS_EN", /* 90 */
+ "SD_CARD_DET_CONN",
+ "",
+ "",
+ "MOS_BT_WLAN_SLIMBUS_CLK",
+ "MOS_BT_WLAN_SLIMBUS_DAT0",
+ "",
+ "",
+ "",
+ "",
+
+ "", /* 100 */
+ "",
+ "",
+ "",
+ "H1_AP_INT_N",
+ "",
+ "AMP_BCLK",
+ "AMP_DIN",
+ "AMP_LRCLK",
+ "UIM1_DATA_GPIO_109",
+
+ "UIM1_CLK_GPIO_110", /* 110 */
+ "UIM1_RESET_GPIO_111",
+ "",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RESET",
+ "UIM1_PRESENT",
+ "SDM_RFFE0_CLK",
+ "SDM_RFFE0_DATA",
+ "",
+
+ "SDM_RFFE1_DATA", /* 120 */
+ "SC_GPIO_121",
+ "FASTBOOT_SEL_1",
+ "SC_GPIO_123",
+ "FASTBOOT_SEL_2",
+ "SM_RFFE4_CLK_GRFC_8",
+ "SM_RFFE4_DATA_GRFC_9",
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "",
+
+ "", /* 130 */
+ "",
+ "",
+ "SDR_QLINK_REQ",
+ "SDR_QLINK_EN",
+ "QLINK0_WMSS_RESET_N",
+ "SMR526_QLINK1_REQ",
+ "SMR526_QLINK1_EN",
+ "SMR526_QLINK1_WMSS_RESET_N",
+ "",
+
+ "SAR1_INT_N", /* 140 */
+ "SAR0_INT_N",
+ "",
+ "",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+
+ "DMIC01_CLK", /* 150 */
+ "DMIC01_DATA",
+ "DMIC23_CLK",
+ "DMIC23_DATA",
+ "",
+ "",
+ "EC_IN_RW_N",
+ "EN_PP3300_HUB",
+ "WCD_SWR_TX_DATA2",
+ "",
+
+ "", /* 160 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "", /* 170 */
+ "MOS_BLE_UART_TX",
+ "MOS_BLE_UART_RX",
+ "",
+ "",
+ "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
deleted file mode 100644
index 1779d96c30f6..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ /dev/null
@@ -1,1352 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Herobrine board device tree source
- *
- * Copyright 2021 Google LLC.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "sc7280.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm7325.dtsi"
-#include "pm8350c.dtsi"
-#include "pmk8350.dtsi"
-
-#include "sc7280-chrome-common.dtsi"
-
-/ {
- model = "Google Herobrine (rev0)";
- compatible = "google,herobrine-rev0", "qcom,sc7280";
-};
-
-/ {
- aliases {
- serial0 = &uart5;
- serial1 = &uart7;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- /* FIXED REGULATORS - parents above children */
-
- /* This is the top level supply and variable voltage */
- ppvar_sys: ppvar-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "ppvar_sys";
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* This divides ppvar_sys by 2, so voltage is variable */
- src_vph_pwr: src-vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "src_vph_pwr";
-
- /* EC turns on with switchcap_on; always on for AP */
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp5000_s3: pp5000-s3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp5000_s3";
-
- /* EC turns on with en_pp5000_s3; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300_z1: pp3300-z1-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_z1";
-
- /* EC turns on with en_pp3300_z1; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300_audio:
- pp3300_codec: pp3300-codec-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_codec";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&en_pp3300_codec>;
-
- vin-supply = <&pp3300_z1>;
- };
-
- pp3300_cam:
- pp3300_edp:
- pp3300_ts: pp3300-edp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_edp";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&en_pp3300_dx_edp>;
-
- vin-supply = <&pp3300_z1>;
- };
-
- pp3300_fp:
- pp3300_fp_ls:
- pp3300_mcu: pp3300-fp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_fp";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-boot-on;
- regulator-always-on;
-
- /*
- * WARNING: it is intentional that GPIO 42 isn't listed here.
- * The userspace script for updating the fingerprint firmware
- * needs to control the FP regulators during a FW update,
- * hence the signal can't be owned by the kernel regulator.
- */
-
- pinctrl-names = "default";
- pinctrl-0 = <&en_fp_rails>;
-
- vin-supply = <&pp3300_z1>;
- };
-
- pp3300_hub: pp3300-hub-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_hub";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- regulator-boot-on;
- regulator-always-on;
-
- gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&en_pp3300_hub>;
-
- vin-supply = <&pp3300_z1>;
- };
-
- pp3300_tp: pp3300-tp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_tp";
-
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- /* AP turns on with PP1800_L18B_S0; always on for AP */
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&pp3300_z1>;
- };
-
- pp2850_uf_cam: pp2850-uf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp2850_uf_cam";
-
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
-
- gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&uf_cam_en>;
-
- vin-supply = <&pp3300_cam>;
- };
-
- pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp2850_vcm_wf_cam";
-
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
-
- gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&wf_cam_en>;
-
- vin-supply = <&pp3300_cam>;
- };
-
- pp2850_wf_cam: pp2850-wf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp2850_wf_cam";
-
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
-
- gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- /*
- * The pinconf can only be referenced once so we put it on the
- * first regulator and comment it out here.
- *
- * pinctrl-names = "default";
- * pinctrl-0 = <&wf_cam_en>;
- */
-
- vin-supply = <&pp3300_cam>;
- };
-
- pp1800_fp: pp1800-fp-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp1800_fp";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-boot-on;
- regulator-always-on;
-
- /*
- * WARNING: it is intentional that GPIO 42 isn't listed here.
- * The userspace script for updating the fingerprint firmware
- * needs to control the FP regulators during a FW update,
- * hence the signal can't be owned by the kernel regulator.
- */
-
- pinctrl-names = "default";
- pinctrl-0 = <&en_fp_rails>;
-
- vin-supply = <&pp1800_l18b_s0>;
- status = "disabled";
- };
-
- pp1800_uf_cam: pp1800-uf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp1800_uf_cam";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- /*
- * The pinconf can only be referenced once so we put it on the
- * first regulator and comment it out here.
- *
- * pinctrl-names = "default";
- * pinctrl-0 = <&uf_cam_en>;
- */
-
- vin-supply = <&pp1800_l19b>;
- };
-
- pp1800_wf_cam: pp1800-wf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp1800_wf_cam";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- /*
- * The pinconf can only be referenced once so we put it on the
- * first regulator and comment it out here.
- *
- * pinctrl-names = "default";
- * pinctrl-0 = <&wf_cam_en>;
- */
-
- vin-supply = <&pp1800_l19b>;
- };
-
- pp1200_wf_cam: pp1200-wf-cam-regulator {
- compatible = "regulator-fixed";
- regulator-name = "pp1200_wf_cam";
-
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- /*
- * The pinconf can only be referenced once so we put it on the
- * first regulator and comment it out here.
- *
- * pinctrl-names = "default";
- * pinctrl-0 = <&wf_cam_en>;
- */
-
- vin-supply = <&pp1200_l6b>;
- };
-
- /* BOARD-SPECIFIC TOP LEVEL NODES */
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- status = "disabled";
- pinctrl-names = "default";
- pinctrl-0 = <&pen_pdct_l>;
-
- pen_insert: pen-insert {
- label = "Pen Insert";
-
- /* Insert = low, eject = high */
- gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
- linux,code = <SW_PEN_INSERTED>;
- linux,input-type = <EV_SW>;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- wakeup-source;
- };
- };
-
- pwmleds {
- compatible = "pwm-leds";
- status = "disabled";
- keyboard_backlight: keyboard-backlight {
- status = "disabled";
- label = "cros_ec::kbd_backlight";
- pwms = <&cros_ec_pwm 0>;
- max-brightness = <1023>;
- };
- };
-};
-
-&apps_rsc {
- pm7325-regulators {
- compatible = "qcom,pm7325-rpmh-regulators";
- qcom,pmic-id = "b";
-
- vdd19_pmu_pcie_i:
- vdd19_pmu_rfa_i:
- vreg_s1b_wlan:
- vreg_s1b: smps1 {
- regulator-min-microvolt = <1856000>;
- regulator-max-microvolt = <2040000>;
- };
-
- vdd_pmu_aon_i:
- vreg_s7b_wlan:
- vreg_s7b: smps7 {
- regulator-min-microvolt = <535000>;
- regulator-max-microvolt = <1120000>;
- };
-
- vdd13_pmu_pcie_i:
- vdd13_pmu_rfa_i:
- vreg_s8b_wlan:
- vreg_s8b: smps8 {
- regulator-min-microvolt = <1256000>;
- regulator-max-microvolt = <1500000>;
- };
-
- vdda_usb_ss_dp_core:
- vreg_l1b: ldo1 {
- regulator-min-microvolt = <825000>;
- regulator-max-microvolt = <925000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdda_usb_hs0_3p1:
- vreg_l2b: ldo2 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1200_l6b:
- vdd_ufs_1p2:
- vdd_vref:
- vdda_csi01_1p2:
- vdda_csi23_1p2:
- vdda_csi4_1p2:
- vdda_dsi0_1p2:
- vdda_pcie0_1p2:
- vdda_pcie1_1p2:
- vdda_usb_ss_dp_1p2:
- vdda_qlink0_1p2_ck:
- vdda_qlink1_1p2_ck:
- vreg_l6b_1p2:
- vreg_l6b: ldo6 {
- regulator-min-microvolt = <1120000>;
- regulator-max-microvolt = <1408000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2950_l7b:
- vreg_l7b: ldo7 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- codec_vcc:
- pp1800_l18b_s0:
- pp1800_ts:
- vdd1:
- vddpx_0:
- vddpx_3:
- vddpx_7:
- vreg_l18b: ldo18 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1800_l19b:
- vddpx_ts:
- vddpx_wl4otp:
- vreg_l19b: ldo19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
- };
-
- pm8350c-regulators {
- compatible = "qcom,pm8350c-rpmh-regulators";
- qcom,pmic-id = "c";
-
- vreg_s1c: smps1 {
- regulator-min-microvolt = <2190000>;
- regulator-max-microvolt = <2210000>;
- };
-
- vddpx_1:
- vreg_s9c: smps9 {
- regulator-min-microvolt = <1010000>;
- regulator-max-microvolt = <1170000>;
- };
-
- pp1800_l1c:
- pp1800_pen:
- vdd_a_gfx_cs_1p1:
- vdd_a_cxo_1p8:
- vdd_qfprom:
- vdda_apc_cs_1p8:
- vdda_qrefs_1p8:
- vdda_turing_q6_cs_1p8:
- vdda_usb_hs0_1p8:
- vreg_l1c: ldo1 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1980000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- dmic_vdd:
- pp1800_alc5682:
- pp1800_l2c:
- pp1800_vreg_alc5682:
- vreg_l2c: ldo2 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <1980000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp3300_sar:
- pp3300_sensor:
- vreg_l3c: ldo3 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3540000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- ppvar_uim1:
- vddpx_5:
- vreg_l4c: ldo4 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2950_l5c:
- uim_vcc:
- vddpx_6:
- vreg_l5c: ldo5 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- ppvar_l6c:
- vddpx_2:
- vreg_l6c: ldo6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_l7c: ldo7 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3544000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1800_prox:
- pp1800_sar:
- vreg_l8c: ldo8 {
- regulator-min-microvolt = <1620000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2950_l9c:
- vreg_l9c: ldo9 {
- regulator-min-microvolt = <2960000>;
- regulator-max-microvolt = <2960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vdd_a_gnss_0p9:
- vdd_ufs_core:
- vdd_usb_hs0_core:
- vdd_vref_0p9:
- vdda_csi01_0p9:
- vdda_csi23_0p9:
- vdda_csi4_0p9:
- vdda_dsi0_pll_0p9:
- vdda_dsi0_0p9:
- vdda_pcie0_core:
- vdda_pcie1_core:
- vdda_qlink0_0p9:
- vdda_qlink1_0p9:
- vdda_qlink0_0p9_ck:
- vdda_qlink1_0p9_ck:
- vdda_qrefs_0p875:
- vreg_l10c_0p8:
- vreg_l10c: ldo10 {
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1050000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp2800_l11c:
- vreg_l11c: ldo11 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3544000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp1800_l12c:
- vreg_l12c: ldo12 {
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <2000000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- pp3300_l13c:
- vreg_l13c: ldo13 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3544000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
- };
-
- vreg_bob: bob {
- regulator-min-microvolt = <3008000>;
- regulator-max-microvolt = <3960000>;
- regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
- };
- };
-};
-
-ap_tp_i2c: &i2c1 {
- status = "okay";
- clock-frequency = <400000>;
-
- trackpad: trackpad@15 {
- compatible = "elan,ekth3000";
- reg = <0x15>;
- pinctrl-names = "default";
- pinctrl-0 = <&tp_int_odl>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <102 IRQ_TYPE_EDGE_FALLING>;
-
- vcc-supply = <&pp3300_z1>;
-
- wakeup-source;
- };
-};
-
-ap_h1_i2c: &i2c12 {
- status = "okay";
- clock-frequency = <400000>;
-
- tpm@50 {
- compatible = "google,cr50";
- reg = <0x50>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&h1_ap_int_odl>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <54 IRQ_TYPE_EDGE_RISING>;
- };
-};
-
-ap_ts_pen: &i2c13 {
- status = "okay";
- clock-frequency = <400000>;
-
- ap_ts: touchscreen@10 {
- compatible = "hid-over-i2c";
- reg = <0x10>;
- pinctrl-names = "default";
- pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <81 IRQ_TYPE_LEVEL_LOW>;
-
- post-power-on-delay-ms = <20>;
- hid-descr-addr = <0x0001>;
-
- vdd-supply = <&pp3300_ts>;
- };
-};
-
-&pm7325_gpios {
- status = "disabled"; /* No GPIOs are connected */
-};
-
-&pmk8350_gpios {
- status = "disabled"; /* No GPIOs are connected */
-};
-
-&pmk8350_rtc {
- status = "disabled";
-};
-
-&pmk8350_vadc {
- pmk8350_die_temp {
- reg = <PMK8350_ADC7_DIE_TEMP>;
- label = "pmk8350_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-
- pmr735a_die_temp {
- reg = <PMR735A_ADC7_DIE_TEMP>;
- label = "pmr735a_die_temp";
- qcom,pre-scaling = <1 1>;
- };
-};
-
-&qfprom {
- vcc-supply = <&vdd_qfprom>;
-};
-
-&qupv3_id_0 {
- status = "okay";
-};
-
-&qupv3_id_1 {
- status = "okay";
-};
-
-&sdhc_1 {
- status = "okay";
-
- vmmc-supply = <&pp2950_l7b>;
- vqmmc-supply = <&pp1800_l19b>;
-};
-
-&sdhc_2 {
- status = "okay";
-
- pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
- pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
- vmmc-supply = <&pp2950_l9c>;
- vqmmc-supply = <&ppvar_l6c>;
-
- cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
-};
-
-ap_ec_spi: &spi8 {
- status = "okay";
-
- pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>;
- cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-
- cros_ec: ec@0 {
- compatible = "google,cros-ec-spi";
- reg = <0>;
- interrupt-parent = <&tlmm>;
- interrupts = <142 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ap_ec_int_l>;
- spi-max-frequency = <3000000>;
-
- cros_ec_pwm: pwm {
- compatible = "google,cros-ec-pwm";
- #pwm-cells = <1>;
- };
-
- i2c_tunnel: i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- google,remote-bus = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- typec {
- compatible = "google,cros-ec-typec";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_c0: connector@0 {
- compatible = "usb-c-connector";
- reg = <0>;
- label = "left";
- power-role = "dual";
- data-role = "host";
- try-power-role = "source";
- };
-
- usb_c1: connector@1 {
- compatible = "usb-c-connector";
- reg = <1>;
- label = "right";
- power-role = "dual";
- data-role = "host";
- try-power-role = "source";
- };
- };
- };
-};
-
-#include <arm/cros-ec-keyboard.dtsi>
-#include <arm/cros-ec-sbs.dtsi>
-
-&keyboard_controller {
- function-row-physmap = <
- MATRIX_KEY(0x00, 0x02, 0) /* T1 */
- MATRIX_KEY(0x03, 0x02, 0) /* T2 */
- MATRIX_KEY(0x02, 0x02, 0) /* T3 */
- MATRIX_KEY(0x01, 0x02, 0) /* T4 */
- MATRIX_KEY(0x03, 0x04, 0) /* T5 */
- MATRIX_KEY(0x02, 0x04, 0) /* T6 */
- MATRIX_KEY(0x01, 0x04, 0) /* T7 */
- MATRIX_KEY(0x02, 0x09, 0) /* T8 */
- MATRIX_KEY(0x01, 0x09, 0) /* T9 */
- MATRIX_KEY(0x00, 0x04, 0) /* T10 */
- >;
- linux,keymap = <
- MATRIX_KEY(0x00, 0x02, KEY_BACK)
- MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
- MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
- MATRIX_KEY(0x01, 0x02, KEY_SCALE)
- MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
- MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
- MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
- MATRIX_KEY(0x02, 0x09, KEY_MUTE)
- MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
- MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
-
- CROS_STD_MAIN_KEYMAP
- >;
-};
-
-&uart5 {
- compatible = "qcom,geni-debug-uart";
- status = "okay";
-};
-
-&uart7 {
- status = "okay";
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- dr_mode = "host";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vdd_usb_hs0_core>;
- vdda33-supply = <&vdda_usb_hs0_3p1>;
- vdda18-supply = <&vdda_usb_hs0_1p8>;
-};
-
-&usb_1_qmpphy {
- status = "okay";
-
- vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
- vdda-pll-supply = <&vdda_usb_ss_dp_core>;
-};
-
-&usb_2 {
- status = "okay";
-};
-
-&usb_2_dwc3 {
- dr_mode = "host";
-};
-
-&usb_2_hsphy {
- status = "okay";
-
- vdda-pll-supply = <&vdd_usb_hs0_core>;
- vdda33-supply = <&vdda_usb_hs0_3p1>;
- vdda18-supply = <&vdda_usb_hs0_1p8>;
-};
-
-/* PINCTRL - additions to nodes defined in sc7280.dtsi */
-
-&dp_hot_plug_det {
- bias-disable;
-};
-
-&pcie1_clkreq_n {
- bias-pull-up;
- drive-strength = <2>;
-};
-
-&qspi_cs0 {
- bias-disable;
-};
-
-&qspi_clk {
- bias-disable;
-};
-
-&qspi_data01 {
- /* High-Z when no transfers; nice to park the lines */
- bias-pull-up;
-};
-
-&qup_uart5_rx {
- drive-strength = <2>;
- bias-pull-up;
-};
-
-&qup_uart5_tx {
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_uart7_cts {
- /*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
- */
- bias-pull-down;
-};
-
-&qup_uart7_rts {
- /* We'll drive RTS, so no pull */
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_uart7_tx {
- /* We'll drive TX, so no pull */
- drive-strength = <2>;
- bias-disable;
-};
-
-&qup_uart7_rx {
- /*
- * Configure a pull-up on RX. This is needed to avoid
- * garbage data when the TX pin of the Bluetooth module is
- * in tri-state (module powered off or not driving the
- * signal yet).
- */
- bias-pull-up;
-};
-
-&sdc1_clk {
- bias-disable;
- drive-strength = <16>;
-};
-
-&sdc1_cmd {
- bias-pull-up;
- drive-strength = <10>;
-};
-
-&sdc1_data {
- bias-pull-up;
- drive-strength = <10>;
-};
-
-&sdc1_rclk {
- bias-pull-down;
-};
-
-&sdc2_clk {
- bias-disable;
- drive-strength = <16>;
-};
-
-&sdc2_cmd {
- bias-pull-up;
- drive-strength = <10>;
-};
-
-&sdc2_data {
- bias-pull-up;
- drive-strength = <10>;
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&pm8350c_gpios {
- gpio-line-names = "AP_SUSPEND",
- "",
- "",
- "AP_BL_EN",
- "",
- "SD_CD_ODL",
- "",
- "",
- "AP_BL_PWM";
-
- ap_bl_en: ap-bl-en {
- pins = "gpio4";
- function = "normal";
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- bias-disable;
-
- /* Force backlight to be disabled to match state at boot. */
- output-low;
- };
-};
-
-&tlmm {
- gpio-line-names = "HP_I2C_SDA", /* 0 */
- "HP_I2C_SCL",
- "SSD_RST_L",
- "PE_WAKE_ODL",
- "AP_TP_I2C_SDA",
- "AP_TP_I2C_SCL",
- "UF_CAM_EN",
- "WF_CAM_EN",
- "AP_SAR_SENSOR_SDA",
- "AP_SAR_SENSOR_SCL",
-
- "", /* 10 */
- "",
- "AP_SPI_MOSI",
- "AP_SPI_MISO",
- "AP_SPI_CLK",
- "AP_SPI_CS0_L",
- "",
- "",
- "EDP_HPD",
- "",
-
- "UF_CAM_RST_L", /* 20 */
- "WF_CAM_RST_L",
- "UART_AP_TX_DBG_RX",
- "UART_DBG_TX_AP_RX",
- "EN_PP3300_HUB",
- "",
- "HOST2WLAN_SOL",
- "WLAN2HOST_SOL",
- "BT_UART_CTS",
- "BT_UART_RTS",
-
- "BT_UART_TXD", /* 30 */
- "BT_UART_RXD",
- "AP_EC_SPI_MISO",
- "AP_EC_SPI_MOSI",
- "AP_EC_SPI_CLK",
- "AP_EC_SPI_CS_L",
- "",
- "",
- "",
- "PEN_PDCT_L",
-
- "IO_BRD_ID0", /* 40 */
- "IO_BRD_ID1",
- "EN_FP_RAILS",
- "PEN_IRQ_L",
- "AP_SPI_FP_MISO",
- "AP_SPI_FP_MOSI",
- "AP_SPI_FP_CLK",
- "AP_SPI_FP_CS_L",
- "AP_H1_SPI_MISO",
- "AP_H1_SPI_MOSI",
-
- "AP_H1_SPI_CLK", /* 50 */
- "AP_H1_SPI_CS_L",
- "AP_TS_PEN_I2C_SDA",
- "AP_TS_PEN_I2C_SCL",
- "H1_AP_INT_ODL",
- "",
- "LCM_RST_1V8_L",
- "AMP_EN",
- "",
- "DP_HOT_PLUG_DET",
-
- "HUB_RST_L", /* 60 */
- "FP_TO_AP_IRQ_L",
- "",
- "",
- "UF_CAM_MCLK",
- "WF_CAM_MCLK",
- "IO_BRD_ID2",
- "EN_PP3300_CODEC",
- "EC_IN_RW_ODL",
- "UF_CAM_SDA",
-
- "UF_CAM_SCL", /* 70 */
- "WF_CAM_SDA",
- "WF_CAM_SCL",
- "AP_BRD_ID0",
- "AP_BRD_ID1",
- "AP_BRD_ID2",
- "",
- "FPMCU_BOOT0",
- "FP_RST_L",
- "PE_CLKREQ_ODL",
-
- "EN_EDP_PP3300", /* 80 */
- "TS_INT_L",
- "FORCE_USB_BOOT",
- "WCD_RST_L",
- "WLAN_EN",
- "BT_EN",
- "WLAN_SW_CTRL",
- "PCIE0_RESET_L",
- "PCIE0_CLK_REQ_L",
- "PCIE0_WAKE_L",
-
- "AS_EN", /* 90 */
- "SD_CD_ODL",
- "",
- /*
- * AP_FLASH_WP_L is crossystem ABI. Schematics
- * call it BIOS_FLASH_WP_L.
- */
- "AP_FLASH_WP_L",
- "BT_WLAN_SB_CLK",
- "BT_WLAN_SB_DATA",
- "HP_MCLK",
- "HP_BCLK",
- "HP_DOUT",
- "HP_DIN",
-
- "HP_LRCLK", /* 100 */
- "HP_IRQ",
- "TP_INT_ODL",
- "",
- "IO_SKU_ID2",
- "TS_RESET_L",
- "AMP_BCLK",
- "AMP_DIN",
- "AMP_LRCLK",
- "UIM2_DATA",
-
- "UIM2_CLK", /* 110 */
- "UIM2_RST",
- "UIM2_PRESENT",
- "UIM1_DATA",
- "UIM1_CLK",
- "UIM1_RST",
- "",
- "RFFE0_CLK",
- "RFFE0_DATA/BOOT_CONFIG_0",
- "RFFE1_CLK",
-
- "RFFE1_DATA/BOOT_CONFIG_1", /* 120 */
- "RFFE2_CLK",
- "RFFE2_DATA/BOOT_CONFIG_2",
- "RFFE3_CLK",
- "RFFE3_DATA/BOOT_CONFIG_3",
- "RFFE4_CLK",
- "RFFE4_DATA",
- "WCI2_LTE_COEX_RXD",
- "WCI2_LTE_COEX_TXD",
- "IO_SKU_ID0",
-
- "IO_SKU_ID1", /* 130 */
- "",
- "",
- "QLINK0_REQ",
- "QLINK0_EN",
- "QLINK0_WMSS_RESET_L",
- "QLINK1_REQ",
- "QLINK1_EN",
- "QLINK1_WMSS_RESET_L",
- "FORCED_USB_BOOT_POL",
-
- "", /* 140 */
- "P_SENSOR_INT_L",
- "AP_EC_INT_L",
- "",
- "WCD_SWR_TX_CLK",
- "WCD_SWR_TX_DATA_0",
- "WCD_SWR_TX_DATA_1",
- "WCD_SWR_RX_CLK",
- "WCD_SWR_RX_DATA_0",
- "WCD_SWR_RX_DATA_1",
-
- "", /* 150 */
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "WCD_SWR_TX_DATA_2",
- "",
-
- "", /* 160 */
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
-
- "", /* 170 */
- "SENS_UART_TXD",
- "SENS_UART_RXD",
- "",
- "",
- "";
-
- /*
- * pinctrl settings for pins that have no real owners.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&bios_flash_wp_l>;
-
- amp_en: amp-en {
- pins = "gpio57";
- function = "gpio";
- bias-pull-down;
- };
-
- ap_ec_int_l: ap-ec-int-l {
- pins = "gpio142";
- input-enable;
- bias-pull-up;
- };
-
- bios_flash_wp_l: bios-flash-wp-l {
- pins = "gpio93";
- function = "gpio";
- input-enable;
- bias-disable;
- };
-
- bt_en: bt-en {
- pins = "gpio85";
- function = "gpio";
- drive-strength = <2>;
- output-low;
- bias-pull-down;
- };
-
- en_fp_rails: en-fp-rails {
- pins = "gpio42";
- drive-strength = <2>;
- output-high;
- bias-disable;
- };
-
- en_pp3300_codec: en-pp3300-codec {
- pins = "gpio67";
- drive-strength = <2>;
- bias-disable;
- };
-
- en_pp3300_dx_edp: en-pp3300-dx-edp {
- pins = "gpio80";
- function = "gpio";
- drive-strength = <2>;
- /* Has external pulldown */
- bias-disable;
- };
-
- en_pp3300_hub: en-pp3300-hub {
- pins = "gpio24";
- function = "gpio";
- drive-strength = <2>;
- /* Has external pulldown */
- bias-disable;
- };
-
- fp_to_ap_irq_l: fp-to-ap-irq-l {
- pins = "gpio61";
- function = "gpio";
- input-enable;
- /* Has external pullup */
- bias-disable;
- };
-
- h1_ap_int_odl: h1-ap-int-odl {
- pins = "gpio54";
- function = "gpio";
- input-enable;
- bias-pull-up;
- };
-
- hp_irq: hp-irq {
- pins = "gpio101";
- function = "gpio";
- bias-pull-up;
- };
-
- p_sensor_int_l: p-sensor-int-l {
- pins = "gpio141";
- function = "gpio";
- input-enable;
- bias-pull-up;
- };
-
- pen_irq_l: pen-irq-l {
- pins = "gpio43";
- function = "gpio";
- /* Has external pullup */
- bias-disable;
- };
-
- pen_pdct_l: pen-pdct-l {
- pins = "gpio39";
- function = "gpio";
- /* Has external pullup */
- bias-disable;
- };
-
- qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high {
- pins = "gpio35";
- output-high;
- };
-
- qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high {
- pins = "gpio47";
- output-high;
- };
-
- qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high {
- pins = "gpio51";
- output-high;
- };
-
- qup_uart7_sleep_cts: qup-uart7-sleep-cts {
- pins = "gpio28";
- function = "gpio";
- /*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
- */
- bias-pull-down;
- };
-
- qup_uart7_sleep_rts: qup-uart7-sleep-rts {
- pins = "gpio29";
- function = "gpio";
- /*
- * Configure pull-down on RTS. As RTS is active low
- * signal, pull it low to indicate the BT SoC that it
- * can wakeup the system anytime from suspend state by
- * pulling RX low (by sending wakeup bytes).
- */
- bias-pull-down;
- };
-
- qup_uart7_sleep_rx: qup-uart7-sleep-rx {
- pins = "gpio31";
- function = "gpio";
- /*
- * Configure a pull-up on RX. This is needed to avoid
- * garbage data when the TX pin of the Bluetooth module
- * is floating which may cause spurious wakeups.
- */
- bias-pull-up;
- };
-
- qup_uart7_sleep_tx: qup-uart7-sleep-tx {
- pins = "gpio30";
- function = "gpio";
- /*
- * Configure pull-up on TX when it isn't actively driven
- * to prevent BT SoC from receiving garbage during sleep.
- */
- bias-pull-up;
- };
-
- sd_cd: sd-cd {
- pins = "gpio91";
- function = "gpio";
- bias-pull-up;
- };
-
- tp_int_odl: tp-int-odl {
- pins = "gpio102";
- function = "gpio";
- /* Has external pullup */
- bias-disable;
- };
-
- ts_int_l: ts-int-l {
- pins = "gpio81";
- function = "gpio";
- /* Has external pullup */
- bias-pull-up;
- };
-
- ts_reset_l: ts-reset-l {
- pins = "gpio105";
- function = "gpio";
- /* Has external pullup */
- bias-disable;
- drive-strength = <2>;
- };
-
- uf_cam_en: uf-cam-en {
- pins = "gpio6";
- function = "gpio";
- drive-strength = <2>;
- /* Has external pulldown */
- bias-disable;
- };
-
- wf_cam_en: wf-cam-en {
- pins = "gpio7";
- function = "gpio";
- drive-strength = <2>;
- /* Has external pulldown */
- bias-disable;
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index f95273052da0..b69ca09d9bfb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -14,6 +14,36 @@
compatible = "google,herobrine", "qcom,sc7280";
};
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+ status = "okay";
+};
+
+&pp3300_fp_mcu {
+ status = "okay";
+};
+
+&pp2850_vcm_wf_cam {
+ status = "okay";
+};
+
+&pp2850_wf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp1200_wf_cam {
+ status = "okay";
+};
+
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
&ap_spi_fp {
@@ -70,6 +100,14 @@ ts_i2c: &i2c13 {
};
};
+&mdss_edp {
+ status = "okay";
+};
+
+&mdss_edp_phy {
+ status = "okay";
+};
+
/* For nvme */
&pcie1 {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
new file mode 100644
index 000000000000..d3d6ffad4eff
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Villager board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+
+/ {
+ model = "Google Villager (rev0+)";
+ compatible = "google,villager", "qcom,sc7280";
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+ status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ trackpad: trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ hid-descr-addr = <0x20>;
+ vcc-supply = <&pp3300_z1>;
+
+ wakeup-source;
+ };
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
+
+&ap_sar_sensor0 {
+ status = "okay";
+};
+
+&ap_sar_sensor1 {
+ status = "okay";
+};
+
+&mdss_edp {
+ status = "okay";
+};
+
+&mdss_edp_phy {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+ status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+ status = "okay";
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+ gpio-line-names = "FLASH_STROBE_1", /* 1 */
+ "AP_SUSPEND",
+ "PM8008_1_RST_N",
+ "",
+ "",
+ "",
+ "PMIC_EDP_BL_EN",
+ "PMIC_EDP_BL_PWM",
+ "";
+};
+
+&tlmm {
+ gpio-line-names = "AP_TP_I2C_SDA", /* 0 */
+ "AP_TP_I2C_SCL",
+ "SSD_RST_L",
+ "PE_WAKE_ODL",
+ "AP_SAR_SDA",
+ "AP_SAR_SCL",
+ "PRB_SC_GPIO_6",
+ "TP_INT_ODL",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+
+ "GNSS_L1_EN", /* 10 */
+ "GNSS_L5_EN",
+ "SPI_AP_MOSI",
+ "SPI_AP_MISO",
+ "SPI_AP_CLK",
+ "SPI_AP_CS0_L",
+ /*
+ * AP_FLASH_WP is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_OD.
+ */
+ "AP_FLASH_WP",
+ "",
+ "AP_EC_INT_L",
+ "",
+
+ "UF_CAM_RST_L", /* 20 */
+ "WF_CAM_RST_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "PM8008_IRQ_1",
+ "HOST2WLAN_SOL",
+ "WLAN2HOST_SOL",
+ "MOS_BT_UART_CTS",
+ "MOS_BT_UART_RFR",
+
+ "MOS_BT_UART_TX", /* 30 */
+ "MOS_BT_UART_RX",
+ "PRB_SC_GPIO_32",
+ "HUB_RST_L",
+ "",
+ "",
+ "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+
+ "AP_EC_SPI_MISO", /* 40 */
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "LCM_RST_L",
+ "EARLY_EUD_N",
+ "",
+ "DP_HOT_PLUG_DET",
+ "IO_BRD_MLB_ID0",
+ "IO_BRD_MLB_ID1",
+
+ "IO_BRD_MLB_ID2", /* 50 */
+ "SSD_EN",
+ "TS_I2C_SDA_CONN",
+ "TS_I2C_CLK_CONN",
+ "TS_RST_CONN",
+ "TS_INT_CONN",
+ "AP_I2C_TPM_SDA",
+ "AP_I2C_TPM_SCL",
+ "PRB_SC_GPIO_58",
+ "PRB_SC_GPIO_59",
+
+ "EDP_HOT_PLUG_DET_N", /* 60 */
+ "FP_TO_AP_IRQ_L",
+ "",
+ "AMP_EN",
+ "CAM0_MCLK_GPIO_64",
+ "CAM1_MCLK_GPIO_65",
+ "WF_CAM_MCLK",
+ "PRB_SC_GPIO_67",
+ "FPMCU_BOOT0",
+ "UF_CAM_SDA",
+
+ "UF_CAM_SCL", /* 70 */
+ "",
+ "",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "FP_RST_L",
+ "PCIE1_CLKREQ_ODL",
+
+ "EN_PP3300_DX_EDP", /* 80 */
+ "SC_GPIO_81",
+ "FORCED_USB_BOOT",
+ "WCD_RESET_N",
+ "MOS_WLAN_EN",
+ "MOS_BT_EN",
+ "MOS_SW_CTRL",
+ "MOS_PCIE0_RST",
+ "MOS_PCIE0_CLKREQ_N",
+ "MOS_PCIE0_WAKE_N",
+
+ "MOS_LAA_AS_EN", /* 90 */
+ "SD_CD_ODL",
+ "",
+ "",
+ "MOS_BT_WLAN_SLIMBUS_CLK",
+ "MOS_BT_WLAN_SLIMBUS_DAT0",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_DOUT",
+ "HP_DIN",
+
+ "HP_LRCLK", /* 100 */
+ "HP_IRQ",
+ "",
+ "",
+ "GSC_AP_INT_ODL",
+ "EN_PP3300_CODEC",
+ "AMP_BCLK",
+ "AMP_DIN",
+ "AMP_LRCLK",
+ "UIM1_DATA_GPIO_109",
+
+ "UIM1_CLK_GPIO_110", /* 110 */
+ "UIM1_RESET_GPIO_111",
+ "PRB_SC_GPIO_112",
+ "UIM0_DATA",
+ "UIM0_CLK",
+ "UIM0_RST",
+ "UIM0_PRESENT_ODL",
+ "SDM_RFFE0_CLK",
+ "SDM_RFFE0_DATA",
+ "WF_CAM_EN",
+
+ "FASTBOOT_SEL_0", /* 120 */
+ "SC_GPIO_121",
+ "FASTBOOT_SEL_1",
+ "SC_GPIO_123",
+ "FASTBOOT_SEL_2",
+ "SM_RFFE4_CLK_GRFC_8",
+ "SM_RFFE4_DATA_GRFC_9",
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "PRB_SC_GPIO_129",
+
+ "LCM_ID0", /* 130 */
+ "LCM_ID1",
+ "",
+ "SDR_QLINK_REQ",
+ "SDR_QLINK_EN",
+ "QLINK0_WMSS_RESET_N",
+ "SMR526_QLINK1_REQ",
+ "SMR526_QLINK1_EN",
+ "SMR526_QLINK1_WMSS_RESET_N",
+ "PRB_SC_GPIO_139",
+
+ "SAR1_IRQ_ODL", /* 140 */
+ "SAR0_IRQ_ODL",
+ "PRB_SC_GPIO_142",
+ "",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+
+ "DMIC01_CLK", /* 150 */
+ "DMIC01_DATA",
+ "DMIC23_CLK",
+ "DMIC23_DATA",
+ "",
+ "",
+ "EC_IN_RW_ODL",
+ "HUB_EN",
+ "WCD_SWR_TX_DATA2",
+ "",
+
+ "", /* 160 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "", /* 170 */
+ "MOS_BLE_UART_TX",
+ "MOS_BLE_UART_RX",
+ "",
+ "",
+ "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index dc17f2079695..9cb1bc8ed6b5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -92,6 +92,7 @@
pinctrl-0 = <&en_pp3300_codec>;
vin-supply = <&pp3300_z1>;
+ status = "disabled";
};
pp3300_left_in_mlb: pp3300-left-in-mlb-regulator {
@@ -132,6 +133,7 @@
pinctrl-0 = <&en_fp_rails>;
vin-supply = <&pp3300_z1>;
+ status = "disabled";
};
pp3300_hub: pp3300-hub-regulator {
@@ -178,6 +180,13 @@
pinctrl-names = "default";
pinctrl-0 = <&ssd_en>;
+ /*
+ * The bootloaer may have left PCIe configured. Powering this
+ * off while the PCIe clocks are still running isn't great,
+ * so it's better to default to this regulator being on.
+ */
+ regulator-boot-on;
+
vin-supply = <&pp3300_z1>;
};
@@ -194,6 +203,7 @@
pinctrl-0 = <&wf_cam_en>;
vin-supply = <&pp3300_z1>;
+ status = "disabled";
};
pp2850_wf_cam: pp2850-wf-cam-regulator {
@@ -214,6 +224,7 @@
*/
vin-supply = <&pp3300_z1>;
+ status = "disabled";
};
pp1800_fp: pp1800-fp-regulator {
@@ -258,6 +269,7 @@
*/
vin-supply = <&vreg_l19b_s0>;
+ status = "disabled";
};
pp1200_wf_cam: pp1200-wf-cam-regulator {
@@ -278,6 +290,7 @@
*/
vin-supply = <&pp3300_z1>;
+ status = "disabled";
};
/* BOARD-SPECIFIC TOP LEVEL NODES */
@@ -295,7 +308,10 @@
};
/*
- * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD
+ * ADJUSTMENTS TO QCARD REGULATORS
+ *
+ * Mostly this is just board-local names for regulators that come from
+ * Qcard, but this also has some minor regulator overrides.
*
* Names are only listed here if regulators go somewhere other than a
* testpoint.
@@ -339,8 +355,60 @@ vreg_edp_bl: &ppvar_sys {};
ts_avdd: &pp3300_left_in_mlb {};
vreg_edp_3p3: &pp3300_left_in_mlb {};
+/* Regulator overrides from Qcard */
+
+/*
+ * Herobrine boards only use l2c to power an external audio codec (like
+ * alc5682) and we want that to be at 1.8V, not at some slightly lower voltage.
+ */
+&vreg_l2c_1p8 {
+ regulator-min-microvolt = <1800000>;
+};
+
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+&edp_panel {
+ /* Our board provides power to the qcard for the eDP panel. */
+ power-supply = <&vreg_edp_3p3>;
+};
+
+ap_sar_sensor_i2c: &i2c1 {
+ clock-frequency = <400000>;
+ status = "disabled";
+
+ ap_sar_sensor0: proximity@28 {
+ compatible = "semtech,sx9324";
+ reg = <0x28>;
+ #io-channel-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sar0_irq_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <141 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&pp1800_prox>;
+
+ label = "proximity-wifi-lte0";
+ status = "disabled";
+ };
+
+ ap_sar_sensor1: proximity@2c {
+ compatible = "semtech,sx9324";
+ reg = <0x2c>;
+ #io-channel-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sar1_irq_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <140 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&pp1800_prox>;
+
+ label = "proximity-wifi-lte1";
+ status = "disabled";
+ };
+};
+
ap_i2c_tpm: &i2c14 {
status = "okay";
clock-frequency = <400000>;
@@ -357,6 +425,14 @@ ap_i2c_tpm: &i2c14 {
};
};
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
/* NVMe drive, enabled on a per-board basis */
&pcie1 {
pinctrl-names = "default";
@@ -366,6 +442,17 @@ ap_i2c_tpm: &i2c14 {
vddpe-3v3-supply = <&pp3300_ssd>;
};
+&pm8350c_pwm {
+ status = "okay";
+};
+
+&pm8350c_pwm_backlight {
+ status = "okay";
+
+ /* Our board provides power to the qcard for the backlight */
+ power-supply = <&vreg_edp_bl>;
+};
+
&pmk8350_rtc {
status = "disabled";
};
@@ -677,7 +764,6 @@ ap_ec_spi: &spi10 {
function = "gpio";
bias-disable;
drive-strength = <2>;
- output-high;
};
fp_to_ap_irq_l: fp-to-ap-irq-l {
@@ -691,7 +777,6 @@ ap_ec_spi: &spi10 {
pins = "gpio68";
function = "gpio";
bias-disable;
- output-low;
};
gsc_ap_int_odl: gsc-ap-int-odl {
@@ -741,7 +826,7 @@ ap_ec_spi: &spi10 {
bias-pull-up;
};
- sar1_irq_odl: sar0-irq-odl {
+ sar1_irq_odl: sar1-irq-odl {
pins = "gpio140";
function = "gpio";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index a7be133a782f..6d3ff80582ae 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -90,7 +90,7 @@
};
&usb_2_dwc3 {
- dr_mode = "host";
+ dr_mode = "otg";
};
&usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b89d896..5eb668991e24 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -233,6 +233,14 @@
};
};
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
&ipa {
status = "okay";
modem-init;
@@ -400,10 +408,13 @@
&qup_uart7_cts {
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
*/
- bias-pull-down;
+ bias-bus-hold;
};
&qup_uart7_rts {
@@ -495,10 +506,13 @@
pins = "gpio28";
function = "gpio";
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
*/
- bias-pull-down;
+ bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts {
@@ -547,3 +561,13 @@
};
};
+&remoteproc_wpss {
+ status = "okay";
+};
+
+&wifi {
+ status = "okay";
+ wifi-firmware {
+ iommus = <&apps_smmu 0x1c02 0x1>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 73b9911dd802..d4f7cab17078 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -34,3 +34,7 @@
&nvme_3v3_regulator {
gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
};
+
+&pm8350c_pwm {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index b833ba1e8f4a..d59002d4492e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -29,6 +29,16 @@
serial0 = &uart5;
serial1 = &uart7;
};
+
+ pm8350c_pwm_backlight: backlight {
+ compatible = "pwm-backlight";
+ status = "disabled";
+
+ enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_edp_bl_en>;
+ pwms = <&pm8350c_pwm 3 65535>;
+ };
};
&apps_rsc {
@@ -293,11 +303,50 @@
modem-init;
};
+/* NOTE: Not all Qcards have eDP connector stuffed */
+&mdss_edp {
+ vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
+ vdda-1p2-supply = <&vdd_a_edp_0_1p2>;
+
+ aux-bus {
+ edp_panel: panel {
+ compatible = "edp-panel";
+
+ backlight = <&pm8350c_pwm_backlight>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ edp_panel_in: endpoint {
+ remote-endpoint = <&mdss_edp_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&mdss_edp_out {
+ remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_edp_phy {
+ vdda-pll-supply = <&vdd_a_edp_0_0p9>;
+ vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+};
+
&pcie1_phy {
vdda-phy-supply = <&vreg_l10c_0p88>;
vdda-pll-supply = <&vreg_l6b_1p2>;
};
+&pm8350c_pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_edp_bl_pwm>;
+};
+
&pmk8350_vadc {
pmk8350-die-temp@3 {
reg = <PMK8350_ADC7_DIE_TEMP>;
@@ -383,6 +432,11 @@ mos_bt_uart: &uart7 {
* baseboard or board device tree, not here.
*/
+/* No external pull for eDP HPD, so set the internal one. */
+&edp_hot_plug_det {
+ bias-pull-down;
+};
+
/*
* For ts_i2c
*
@@ -398,8 +452,14 @@ mos_bt_uart: &uart7 {
/* For mos_bt_uart */
&qup_uart7_cts {
- /* Configure a pull-down on CTS to match the pull of the Bluetooth module. */
- bias-pull-down;
+ /*
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
+ */
+ bias-bus-hold;
};
/* For mos_bt_uart */
@@ -490,10 +550,13 @@ mos_bt_uart: &uart7 {
pins = "gpio28";
function = "gpio";
/*
- * Configure a pull-down on CTS to match the pull of
- * the Bluetooth module.
+ * Configure a bias-bus-hold on CTS to lower power
+ * usage when Bluetooth is turned off. Bus hold will
+ * maintain a low power state regardless of whether
+ * the Bluetooth module drives the pin in either
+ * direction or leaves the pin fully unpowered.
*/
- bias-pull-down;
+ bias-bus-hold;
};
/* For mos_bt_uart */
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index f0b64be63c21..f72451f7f539 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -8,8 +8,11 @@
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7280.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7280.h>
@@ -85,6 +88,11 @@
#size-cells = <2>;
ranges;
+ wlan_ce_mem: memory@4cd000 {
+ no-map;
+ reg = <0x0 0x004cd000 0x0 0x1000>;
+ };
+
hyp_mem: memory@80000000 {
reg = <0x0 0x80000000 0x0 0x600000>;
no-map;
@@ -842,6 +850,11 @@
power-domains = <&rpmhpd SC7280_MX>;
#address-cells = <1>;
#size-cells = <1>;
+
+ gpu_speed_bin: gpu_speed_bin@1e9 {
+ reg = <0x1e9 0x2>;
+ bits = <5 8>;
+ };
};
sdhc_1: sdhci@7c4000 {
@@ -881,6 +894,8 @@
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
+ resets = <&gcc GCC_SDCC1_BCR>;
+
sdhc1_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -901,6 +916,28 @@
};
+ gpi_dma0: dma-controller@900000 {
+ #dma-cells = <3>;
+ compatible = "qcom,sc7280-gpi-dma";
+ reg = <0 0x00900000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7f>;
+ iommus = <&apps_smmu 0x0136 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x009c0000 0 0x2000>;
@@ -928,6 +965,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -946,6 +986,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -980,6 +1023,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -998,6 +1044,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1032,6 +1081,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1050,6 +1102,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1084,6 +1139,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1102,6 +1160,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1136,6 +1197,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1154,6 +1218,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1188,6 +1255,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1206,6 +1276,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1240,6 +1313,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1258,6 +1334,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1292,6 +1371,9 @@
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1310,6 +1392,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1330,6 +1415,28 @@
};
};
+ gpi_dma1: dma-controller@a00000 {
+ #dma-cells = <3>;
+ compatible = "qcom,sc7280-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x1e>;
+ iommus = <&apps_smmu 0x56 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x00ac0000 0 0x2000>;
@@ -1357,6 +1464,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1375,6 +1485,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1409,6 +1522,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1427,6 +1543,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1461,6 +1580,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1479,6 +1601,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1513,6 +1638,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1531,6 +1659,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1565,6 +1696,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1583,6 +1717,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1617,6 +1754,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1635,6 +1775,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1669,6 +1812,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1687,6 +1833,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1721,6 +1870,9 @@
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1739,6 +1891,9 @@
interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -1808,6 +1963,47 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ wifi: wifi@17a10040 {
+ compatible = "qcom,wcn6750-wifi";
+ reg = <0 0x17a10040 0 0x0>;
+ iommus = <&apps_smmu 0x1c00 0x1>;
+ interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+ qcom,rproc = <&remoteproc_wpss>;
+ memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+ status = "disabled";
+ };
+
pcie1: pci@1c08000 {
compatible = "qcom,pcie-sc7280";
reg = <0 0x01c08000 0 0x3000>,
@@ -1903,7 +2099,7 @@
status = "disabled";
- pcie1_lane: lanes@1c0e200 {
+ pcie1_lane: phy@1c0e200 {
reg = <0 0x01c0e200 0 0x170>,
<0 0x01c0e400 0 0x200>,
<0 0x01c0ea00 0 0x1f0>,
@@ -1980,6 +2176,47 @@
#clock-cells = <1>;
};
+ lpass_audiocc: clock-controller@3300000 {
+ compatible = "qcom,sc7280-lpassaudiocc";
+ reg = <0 0x03300000 0 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+ clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+ power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpass_aon: clock-controller@3380000 {
+ compatible = "qcom,sc7280-lpassaoncc";
+ reg = <0 0x03380000 0 0x30000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "iface";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpasscore: clock-controller@3900000 {
+ compatible = "qcom,sc7280-lpasscorecc";
+ reg = <0 0x03900000 0 0x50000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ lpass_hm: clock-controller@3c00000 {
+ compatible = "qcom,sc7280-lpasshm";
+ reg = <0 0x3c00000 0 0x28>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "bi_tcxo";
+ #clock-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
lpass_ag_noc: interconnect@3c40000 {
reg = <0 0x03c40000 0 0xf080>;
compatible = "qcom,sc7280-lpass-ag-noc";
@@ -2003,6 +2240,9 @@
interconnect-names = "gfx-mem";
#cooling-cells = <2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2010,18 +2250,56 @@
opp-hz = /bits/ 64 <315000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <1804000>;
+ opp-supported-hw = <0x03>;
};
opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <4068000>;
+ opp-supported-hw = <0x03>;
};
opp-550000000 {
opp-hz = /bits/ 64 <550000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <6832000>;
+ opp-supported-hw = <0x03>;
+ };
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ opp-peak-kBps = <8368000>;
+ opp-supported-hw = <0x02>;
+ };
+
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x02>;
+ };
+
+ opp-812000000 {
+ opp-hz = /bits/ 64 <812000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x02>;
+ };
+
+ opp-840000000 {
+ opp-hz = /bits/ 64 <840000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x02>;
+ };
+
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ opp-peak-kBps = <8532000>;
+ opp-supported-hw = <0x02>;
};
};
};
@@ -2686,6 +2964,8 @@
qcom,dll-config = <0x0007642c>;
+ resets = <&gcc GCC_SDCC2_BCR>;
+
sdhc2_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -2842,6 +3122,57 @@
status = "disabled";
};
+ remoteproc_wpss: remoteproc@8a00000 {
+ compatible = "qcom,sc7280-wpss-pil";
+ reg = <0 0x08a00000 0 0x10000>;
+
+ interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready", "handover",
+ "stop-ack", "shutdown-ack";
+
+ clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>,
+ <&gcc GCC_WPSS_AHB_CLK>,
+ <&gcc GCC_WPSS_RSCP_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ahb_bdg", "ahb",
+ "rscp", "xo";
+
+ power-domains = <&rpmhpd SC7280_CX>,
+ <&rpmhpd SC7280_MX>;
+ power-domain-names = "cx", "mx";
+
+ memory-region = <&wpss_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&wpss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_WCSS_RESTART>,
+ <&pdc_reset PDC_WPSS_SYNC_RESET>;
+ reset-names = "restart", "pdc_sync";
+
+ qcom,halt-regs = <&tcsr_mutex 0x37000>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_WPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "wpss";
+ qcom,remote-pid = <13>;
+ };
+ };
+
dc_noc: interconnect@90e0000 {
reg = <0 0x090e0000 0 0x5080>;
compatible = "qcom,sc7280-dc-noc";
@@ -2916,6 +3247,7 @@
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
+ wakeup-source;
};
};
@@ -3296,7 +3628,7 @@
port@1 {
reg = <1>;
- edp_out: endpoint { };
+ mdss_edp_out: endpoint { };
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 240293592ef9..7f875bf9390a 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1453,7 +1453,7 @@
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
assigned-clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
@@ -1530,7 +1530,7 @@
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
diff --git a/arch/arm64/boot/dts/qcom/sdm660.dtsi b/arch/arm64/boot/dts/qcom/sdm660.dtsi
index eccf6fde16b4..1d748c5305f4 100644
--- a/arch/arm64/boot/dts/qcom/sdm660.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm660.dtsi
@@ -163,7 +163,7 @@
power-domains = <&rpmpd SDM660_VDDCX>;
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
assigned-clocks = <&mmcc BYTE1_CLK_SRC>,
<&mmcc PCLK1_CLK_SRC>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 28fe45c5d516..194ebeb3259c 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -28,6 +28,13 @@
stdout-path = "serial0:115200n8";
};
+ /* Fixed crystal oscillator dedicated to MCP2517FD */
+ clk40M: can-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+
dc12v: dc12v-regulator {
compatible = "regulator-fixed";
regulator-name = "DC12V";
@@ -746,6 +753,23 @@
};
};
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+
+ can@0 {
+ compatible = "microchip,mcp2517fd";
+ reg = <0>;
+ clocks = <&clk40M>;
+ interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <&vdc_5v>;
+ xceiver-supply = <&vdc_5v>;
+ };
+};
+
&spi2 {
/* On Low speed expansion */
label = "LS-SPI0";
@@ -1051,6 +1075,7 @@
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
qcom,snoc-host-cap-8bit-quirk;
+ qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
};
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
@@ -1219,3 +1244,11 @@
};
};
};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+&qup_spi0_default {
+ config {
+ drive-strength = <6>;
+ bias-disable;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index 367389526b41..d88dc07205f7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -121,7 +121,7 @@
&adsp_pas {
status = "okay";
- firmware-name = "qcom/sdm845/adsp.mdt";
+ firmware-name = "qcom/sdm845/beryllium/adsp.mbn";
};
&apps_rsc {
@@ -185,6 +185,12 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vreg_l24a_3p075: ldo24 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
@@ -208,7 +214,7 @@
&cdsp_pas {
status = "okay";
- firmware-name = "qcom/sdm845/cdsp.mdt";
+ firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
};
&dsi0 {
@@ -218,13 +224,14 @@
panel@0 {
compatible = "tianma,fhd-video";
reg = <0>;
- vddi0-supply = <&vreg_l14a_1p8>;
+ vddio-supply = <&vreg_l14a_1p8>;
vddpos-supply = <&lab>;
vddneg-supply = <&ibb>;
#address-cells = <1>;
#size-cells = <0>;
+ backlight = <&pmi8998_wled>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
port {
@@ -262,7 +269,7 @@
zap-shader {
memory-region = <&gpu_mem>;
- firmware-name = "qcom/sdm845/a630_zap.mbn";
+ firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn";
};
};
@@ -289,7 +296,13 @@
&mss_pil {
status = "okay";
- firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mdt";
+ firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
+};
+
+&ipa {
+ status = "okay";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
};
&pm8998_gpio {
@@ -302,6 +315,17 @@
};
};
+&pmi8998_wled {
+ status = "okay";
+ qcom,current-boost-limit = <970>;
+ qcom,ovp-millivolt = <29600>;
+ qcom,current-limit-microamp = <20000>;
+ qcom,num-strings = <2>;
+ qcom,switching-freq = <600>;
+ qcom,external-pfet;
+ qcom,cabc;
+};
+
&pm8998_pon {
resin {
compatible = "qcom,pm8941-resin";
@@ -541,6 +565,7 @@
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
};
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b31bf62e8680..692cf4be4eef 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -200,8 +200,8 @@
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <607>;
- dynamic-power-coefficient = <100>;
+ capacity-dmips-mhz = <611>;
+ dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -225,8 +225,8 @@
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <607>;
- dynamic-power-coefficient = <100>;
+ capacity-dmips-mhz = <611>;
+ dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -247,8 +247,8 @@
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <607>;
- dynamic-power-coefficient = <100>;
+ capacity-dmips-mhz = <611>;
+ dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -269,8 +269,8 @@
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- capacity-dmips-mhz = <607>;
- dynamic-power-coefficient = <100>;
+ capacity-dmips-mhz = <611>;
+ dynamic-power-coefficient = <290>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -292,7 +292,7 @@
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- dynamic-power-coefficient = <396>;
+ dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -314,7 +314,7 @@
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- dynamic-power-coefficient = <396>;
+ dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -336,7 +336,7 @@
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- dynamic-power-coefficient = <396>;
+ dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -358,7 +358,7 @@
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
- dynamic-power-coefficient = <396>;
+ dynamic-power-coefficient = <442>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
@@ -2027,7 +2027,7 @@
};
pcie0: pci@1c00000 {
- compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
+ compatible = "qcom,pcie-sdm845";
reg = <0 0x01c00000 0 0x2000>,
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
@@ -2132,7 +2132,7 @@
};
pcie1: pci@1c08000 {
- compatible = "qcom,pcie-sdm845", "snps,dw-pcie";
+ compatible = "qcom,pcie-sdm845";
reg = <0 0x01c08000 0 0x2000>,
<0 0x40000000 0 0xf1d>,
<0 0x40000f20 0 0xa8>,
@@ -4283,7 +4283,7 @@
power-domains = <&rpmhpd SDM845_CX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -4335,7 +4335,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -4407,7 +4407,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d7c9edff19f7..fb1a0f662575 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -517,6 +517,45 @@
};
};
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x8c0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ iommus = <&apps_smmu 0x43 0x0>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
qupv3_id_1: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x9c0000 0x0 0x2000>;
@@ -529,16 +568,146 @@
ranges;
status = "disabled";
- uart2: serial@98c000 {
+ i2c6: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart9: serial@98c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x98c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
- pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c10: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ };
+
+ ufs_mem_hc: ufs@1d84000 {
+ compatible = "qcom,sm6350-ufshc", "qcom,ufshc",
+ "jedec,ufs-2.0";
+ reg = <0 0x01d84000 0 0x3000>,
+ <0 0x01d90000 0 0x8000>;
+ reg-names = "std", "ice";
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <2>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ iommus = <&apps_smmu 0x80 0x0>;
+
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "rx_lane1_sync_clk",
+ "ice_core_clk";
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmhcc RPMH_QLINK_CLK>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ freq-table-hz =
+ <50000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <75000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@1d87000 {
+ compatible = "qcom,sm6350-qmp-ufs-phy";
+ reg = <0 0x01d87000 0 0x18c>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clock-names = "ref",
+ "ref_aux";
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+
+ status = "disabled";
+
+ ufs_mem_phy_lanes: phy@1d87400 {
+ reg = <0 0x01d87400 0 0x128>,
+ <0 0x01d87600 0 0x1fc>,
+ <0 0x01d87c00 0 0x1dc>,
+ <0 0x01d87800 0 0x128>,
+ <0 0x01d87a00 0 0x1fc>;
+ #phy-cells = <0>;
+ };
};
tcsr_mutex: hwlock@1f40000 {
@@ -974,12 +1143,54 @@
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 157>;
- qup_uart2_default: qup-uart2-default {
+ qup_uart9_default: qup-uart9-default {
pins = "gpio25", "gpio26";
function = "qup13_f2";
drive-strength = <2>;
bias-disable;
};
+
+ qup_i2c0_default: qup-i2c0-default {
+ pins = "gpio0", "gpio1";
+ function = "qup00";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ pins = "gpio45", "gpio46";
+ function = "qup02";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ pins = "gpio13", "gpio14";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ pins = "gpio27", "gpio28";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ pins = "gpio19", "gpio20";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ pins = "gpio4", "gpio5";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
apps_smmu: iommu@15000000 {
@@ -1145,6 +1356,28 @@
};
};
+ wifi: wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0 0x18800000 0 0x800000>;
+ reg-names = "membase";
+ memory-region = <&wlan_fw_mem>;
+ interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x20 0x1>;
+ qcom,msa-fixed-perm;
+ status = "disabled";
+ };
+
apps_rsc: rsc@18200000 {
compatible = "qcom,rpmh-rsc";
label = "apps_rsc";
@@ -1217,7 +1450,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index adb6ca2be2a5..61925216f5e3 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -23,7 +23,7 @@
qcom,board-id = <8 32>;
aliases {
- serial0 = &uart2;
+ serial0 = &uart9;
};
chosen {
@@ -296,6 +296,35 @@
firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";
};
+&i2c10 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ haptics@5a {
+ compatible = "awinic,aw8695";
+ reg = <0x5a>;
+ interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+
+ awinic,f0-preset = <2350>;
+ awinic,f0-coefficient = <260>;
+ awinic,f0-calibration-percent = <7>;
+ awinic,drive-level = <125>;
+
+ awinic,f0-detection-play-time = <5>;
+ awinic,f0-detection-wait-time = <3>;
+ awinic,f0-detection-repeat = <2>;
+ awinic,f0-detection-trace = <15>;
+
+ awinic,boost-debug = /bits/ 8 <0x30 0xeb 0xd4>;
+ awinic,tset = /bits/ 8 <0x12>;
+ awinic,r-spare = /bits/ 8 <0x68>;
+
+ awinic,bemf-upper-threshold = <4104>;
+ awinic,bemf-lower-threshold = <1016>;
+ };
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
@@ -332,10 +361,28 @@
gpio-reserved-ranges = <13 4>, <56 2>;
};
-&uart2 {
+&uart9 {
status = "okay";
};
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l7e>;
+ vcc-max-microamp = <800000>;
+ vccq2-supply = <&vreg_l12a>;
+ vccq2-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l18a>;
+ vdda-pll-supply = <&vreg_l22a>;
+};
+
&usb_1 {
status = "okay";
};
@@ -359,3 +406,13 @@
vdda-phy-supply = <&vreg_l22a>;
vdda-pll-supply = <&vreg_l16a>;
};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l4a>;
+ vdd-1.8-xo-supply = <&vreg_l7a>;
+ vdd-1.3-rfa-supply = <&vreg_l2e>;
+ vdd-3.3-ch0-supply = <&vreg_l10e>;
+ vdd-3.3-ch1-supply = <&vreg_l11e>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 15f3bf2e7ea0..f70ae4c56762 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -915,6 +915,33 @@
status = "disabled";
};
+ ethernet: ethernet@20000 {
+ compatible = "qcom,sm8150-ethqos";
+ reg = <0x0 0x00020000 0x0 0x10000>,
+ <0x0 0x00036000 0x0 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_EMAC_AXI_CLK>,
+ <&gcc GCC_EMAC_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC_PTP_CLK>,
+ <&gcc GCC_EMAC_RGMII_CLK>;
+ interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ power-domains = <&gcc EMAC_GDSC>;
+ resets = <&gcc GCC_EMAC_BCR>;
+
+ iommus = <&apps_smmu 0x3C0 0x0>;
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ status = "disabled";
+ };
+
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -1746,6 +1773,203 @@
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ pcie0: pci@1c00000 {
+ compatible = "qcom,pcie-sm8150", "snps,dw-pcie";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu";
+
+ iommus = <&apps_smmu 0x1d80 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+ <0x100 &apps_smmu 0x1d81 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+
+ perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "refgen";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie0_lane: phy@1c06200 {
+ reg = <0 0x1c06200 0 0x170>, /* tx */
+ <0 0x1c06400 0 0x200>, /* rx */
+ <0 0x1c06800 0 0x1f0>, /* pcs */
+ <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ };
+ };
+
+ pcie1: pci@1c08000 {
+ compatible = "qcom,pcie-sm8150", "snps,dw-pcie";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommus = <&apps_smmu 0x1e00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
+ <0x100 &apps_smmu 0x1e01 0x1>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_lane>;
+ phy-names = "pciephy";
+
+ perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0e000 {
+ compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x1c0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ clock-names = "aux", "cfg_ahb", "refgen";
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie1_lane: phy@1c0e200 {
+ reg = <0 0x1c0e200 0 0x170>, /* tx0 */
+ <0 0x1c0e400 0 0x200>, /* rx0 */
+ <0 0x1c0ea00 0 0x1f0>, /* pcs */
+ <0 0x1c0e600 0 0x170>, /* tx1 */
+ <0 0x1c0e800 0 0x200>, /* rx1 */
+ <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #phy-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+ };
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -1807,6 +2031,8 @@
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
status = "disabled";
@@ -2048,6 +2274,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
qup_i2c0_default: qup-i2c0-default {
mux {
@@ -2448,6 +2675,52 @@
drive-strength = <6>;
bias-disable;
};
+
+ pcie0_default_state: pcie0-default {
+ perst {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio36";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default {
+ perst {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio103";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
@@ -3270,6 +3543,51 @@
};
};
+ sdhc_2: sdhci@8804000 {
+ compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "core", "xo";
+ iommus = <&apps_smmu 0x6a0 0x0>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ power-domains = <&rpmhpd 0>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: sdhc2-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
dc_noc: interconnect@9160000 {
compatible = "qcom,sm8150-dc-noc";
reg = <0 0x09160000 0 0x3200>;
@@ -3381,6 +3699,16 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8150-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x400>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+ <125 63 1>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8150-aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
@@ -3744,7 +4072,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
index d63f7a9bc4e9..e819b5b77363 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi
@@ -441,7 +441,35 @@
status = "okay";
clock-frequency = <1000000>;
- /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */
+ cs35l41_l: cs35l41@40 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x40>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
+
+ cs35l41_r: cs35l41@41 {
+ compatible = "cirrus,cs35l41";
+ reg = <0x41>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+ cirrus,boost-peak-milliamp = <4000>;
+ cirrus,boost-ind-nanohenry = <1000>;
+ cirrus,boost-cap-microfarad = <15>;
+ cirrus,asp-sdout-hiz = <3>;
+ cirrus,gpio2-src-select = <2>;
+ cirrus,gpio2-output-enable;
+ #sound-dai-cells = <1>;
+ };
};
&i2c5 {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1304b86af1a0..dc2562070336 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/clock/qcom,camcc-sm8250.h>
#include <dt-bindings/clock/qcom,videocc-sm8250.h>
/ {
@@ -3153,6 +3154,256 @@
#power-domain-cells = <1>;
};
+ cci0: cci@ac4f000 {
+ compatible = "qcom,sm8250-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac4f000 0 0x1000>;
+ interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+
+ pinctrl-0 = <&cci0_default>;
+ pinctrl-1 = <&cci0_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@ac50000 {
+ compatible = "qcom,sm8250-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <0 0x0ac50000 0 0x1000>;
+ interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK_SRC>;
+ clock-names = "camnoc_axi",
+ "slow_ahb_src",
+ "cpas_ahb",
+ "cci",
+ "cci_src";
+
+ pinctrl-0 = <&cci1_default>;
+ pinctrl-1 = <&cci1_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "disabled";
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ camss: camss@ac6a000 {
+ compatible = "qcom,sm8250-camss";
+ status = "disabled";
+
+ reg = <0 0xac6a000 0 0x2000>,
+ <0 0xac6c000 0 0x2000>,
+ <0 0xac6e000 0 0x1000>,
+ <0 0xac70000 0 0x1000>,
+ <0 0xac72000 0 0x1000>,
+ <0 0xac74000 0 0x1000>,
+ <0 0xacb4000 0 0xd000>,
+ <0 0xacc3000 0 0xd000>,
+ <0 0xacd9000 0 0x2200>,
+ <0 0xacdb200 0 0x2200>;
+ reg-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAM_CC_IFE_0_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_0_AREG_CLK>,
+ <&camcc CAM_CC_IFE_1_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_AREG_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+ clock-names = "cam_ahb_clk",
+ "cam_hf_axi",
+ "cam_sf_axi",
+ "camnoc_axi",
+ "camnoc_axi_src",
+ "core_ahb",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "slow_ahb_src",
+ "vfe0_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe0_areg",
+ "vfe1_ahb",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe1_areg",
+ "vfe_lite_ahb",
+ "vfe_lite_axi",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ iommus = <&apps_smmu 0x800 0x400>,
+ <&apps_smmu 0x801 0x400>,
+ <&apps_smmu 0x840 0x400>,
+ <&apps_smmu 0x841 0x400>,
+ <&apps_smmu 0xc00 0x400>,
+ <&apps_smmu 0xc01 0x400>,
+ <&apps_smmu 0xc40 0x400>,
+ <&apps_smmu 0xc41 0x400>;
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+ <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+ <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+ interconnect-names = "cam_ahb",
+ "cam_hf_0_mnoc",
+ "cam_sf_0_mnoc",
+ "cam_sf_icp_mnoc";
+ };
+
+ camcc: clock-controller@ad00000 {
+ compatible = "qcom,sm8250-camcc";
+ reg = <0 0x0ad00000 0 0x10000>;
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+ power-domains = <&rpmhpd SM8250_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mdss: mdss@ae00000 {
compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
@@ -3206,7 +3457,7 @@
power-domains = <&rpmhpd SM8250_MMCX>;
interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0>;
ports {
#address-cells = <1>;
@@ -3258,7 +3509,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3331,7 +3582,7 @@
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
- interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <5>;
clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
<&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -3523,6 +3774,86 @@
gpio-ranges = <&tlmm 0 0 181>;
wakeup-parent = <&pdc>;
+ cci0_default: cci0-default {
+ cci0_i2c0_default: cci0-i2c0-default {
+ /* SDA, SCL */
+ pins = "gpio101", "gpio102";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci0_i2c1_default: cci0-i2c1-default {
+ /* SDA, SCL */
+ pins = "gpio103", "gpio104";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci0_sleep: cci0-sleep {
+ cci0_i2c0_sleep: cci0-i2c0-sleep {
+ /* SDA, SCL */
+ pins = "gpio101", "gpio102";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+
+ cci0_i2c1_sleep: cci0-i2c1-sleep {
+ /* SDA, SCL */
+ pins = "gpio103", "gpio104";
+ function = "cci_i2c";
+
+ drive-strength = <2>; /* 2 mA */
+ bias-pull-down;
+ };
+ };
+
+ cci1_default: cci1-default {
+ cci1_i2c0_default: cci1-i2c0-default {
+ /* SDA, SCL */
+ pins = "gpio105","gpio106";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_default: cci1-i2c1-default {
+ /* SDA, SCL */
+ pins = "gpio107","gpio108";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
+ cci1_sleep: cci1-sleep {
+ cci1_i2c0_sleep: cci1-i2c0-sleep {
+ /* SDA, SCL */
+ pins = "gpio105","gpio106";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+
+ cci1_i2c1_sleep: cci1-i2c1-sleep {
+ /* SDA, SCL */
+ pins = "gpio107","gpio108";
+ function = "cci_i2c";
+
+ bias-pull-down;
+ drive-strength = <2>; /* 2 mA */
+ };
+ };
+
pri_mi2s_active: pri-mi2s-active {
sclk {
pins = "gpio138";
@@ -4658,7 +4989,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index 1e5e9405d8b1..0fcf5bd88fc7 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,6 +213,10 @@
firmware-name = "qcom/sm8350/cdsp.mbn";
};
+&gpi_dma1 {
+ status = "okay";
+};
+
&mpss {
status = "okay";
firmware-name = "qcom/sm8350/modem.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
index 9cb1d8455fd0..9a6faa9393dc 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts
@@ -281,6 +281,14 @@
firmware-name = "qcom/sm8350/microsoft/cdsp.mbn";
};
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
&ipa {
status = "okay";
@@ -296,6 +304,10 @@
status = "okay";
};
+&qupv3_id_1 {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8350/microsoft/slpi.mbn";
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 20f850b94158..c0137bdcf94b 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,sm8350.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -675,6 +676,28 @@
};
};
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sm8350-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0xff>;
+ iommus = <&apps_smmu 0x5f6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -695,6 +718,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -708,6 +734,9 @@
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -721,6 +750,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -734,6 +766,9 @@
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -747,6 +782,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -760,6 +798,9 @@
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -773,6 +814,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -786,6 +830,9 @@
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -801,6 +848,9 @@
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -827,6 +877,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -840,12 +893,37 @@
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
+ gpi_dma0: dma-controller@900000 {
+ compatible = "qcom,sm8350-gpi-dma";
+ reg = <0 0x09800000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7e>;
+ iommus = <&apps_smmu 0x5b6 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x009c0000 0x0 0x6000>;
@@ -866,6 +944,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -879,6 +960,9 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -892,6 +976,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -905,6 +992,9 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -918,6 +1008,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -931,6 +1024,9 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -961,6 +1057,9 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -974,6 +1073,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -987,6 +1089,9 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1000,6 +1105,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1013,6 +1121,9 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1026,6 +1137,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1039,6 +1153,9 @@
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1065,6 +1182,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1078,12 +1198,37 @@
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8350-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0xff>;
+ iommus = <&apps_smmu 0x56 0x0>;
+ #dma-cells = <3>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -1104,6 +1249,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1117,6 +1265,9 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_120mhz>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1130,6 +1281,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1143,6 +1297,9 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1156,6 +1313,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1169,6 +1329,9 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1182,6 +1345,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1195,6 +1361,9 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1208,6 +1377,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1221,6 +1393,9 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1234,6 +1409,9 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1247,6 +1425,9 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SM8350_CX>;
operating-points-v2 = <&qup_opp_table_100mhz>;
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1881,7 +2062,7 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
@@ -1916,7 +2097,6 @@
iommus = <&apps_smmu 0xe0 0x0>;
clock-names =
- "ref_clk",
"core_clk",
"bus_aggr_clk",
"iface_clk",
@@ -1926,7 +2106,6 @@
"rx_lane0_sync_clk",
"rx_lane1_sync_clk";
clocks =
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_UFS_PHY_AXI_CLK>,
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
<&gcc GCC_UFS_PHY_AHB_CLK>,
@@ -1937,7 +2116,6 @@
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
freq-table-hz =
<75000000 300000000>,
- <75000000 300000000>,
<0 0>,
<0 0>,
<75000000 300000000>,
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index f0fcb1428449..4e51a9d6af98 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -349,6 +349,47 @@
};
};
+&pcie0 {
+ status = "okay";
+ max-link-speed = <2>;
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5b_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pcie1_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l2h_0p91>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&remoteproc_adsp {
+ status = "okay";
+ firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+ status = "okay";
+ firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+ status = "okay";
+ firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
&qupv3_id_0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 9526632d4029..236e53974fdd 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -342,10 +342,32 @@
};
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie0_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l5b_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
+&qupv3_id_2 {
+ status = "okay";
+};
+
&remoteproc_adsp {
status = "okay";
firmware-name = "qcom/sm8450/adsp.mbn";
@@ -366,6 +388,18 @@
firmware-name = "qcom/sm8450/slpi.mbn";
};
+&spi4 {
+ status = "okay";
+};
+
+&spi18 {
+ status = "okay";
+};
+
+&spi19 {
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <28 4>, <36 4>;
};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 934e29b9e153..7f52c3cfdfb7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -6,11 +6,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -47,6 +49,7 @@
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -65,6 +68,7 @@
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -80,6 +84,7 @@
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -95,6 +100,7 @@
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
+ #cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -110,6 +116,7 @@
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -125,6 +132,7 @@
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -141,6 +149,7 @@
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
+ #cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -156,6 +165,7 @@
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
+ #cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -333,6 +343,25 @@
};
};
+ qup_opp_table_100mhz: qup-100mhz-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -683,8 +712,351 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- clock-names = "bi_tcxo", "sleep_clk";
- clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&pcie0_lane>,
+ <&pcie1_lane>,
+ <&sleep_clk>;
+ clock-names = "bi_tcxo",
+ "pcie_0_pipe_clk",
+ "pcie_1_pipe_clk",
+ "sleep_clk";
+ };
+
+ gpi_dma2: dma-controller@800000 {
+ compatible = "qcom,sm8450-gpi-dma";
+ #dma-cells = <3>;
+ reg = <0 0x800000 0 0x60000>;
+ interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7e>;
+ iommus = <&apps_smmu 0x496 0x0>;
+ status = "disabled";
+ };
+
+ qupv3_id_2: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x008c0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x483 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c15: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00880000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c15_data_clk>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi15: spi@880000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00880000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c16: i2c@884000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00884000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c16_data_clk>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi16: spi@884000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00884000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c17: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c17_data_clk>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi17: spi@888000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c18: i2c@88c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x0088c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c18_data_clk>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi18: spi@88c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x0088c000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c19: i2c@890000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00890000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c19_data_clk>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi19: spi@890000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00890000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c20: i2c@894000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00894000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c20_data_clk>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi20: spi@894000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00894000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c21: i2c@898000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00898000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c21_data_clk>;
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi21: spi@898000 {
+ compatible = "qcom,geni-spi";
+ reg = <0 0x00898000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
+ interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>;
+ spi-max-frequency = <50000000>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>;
+ interconnect-names = "qup-core", "qup-config";
+ dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ gpi_dma0: dma-controller@900000 {
+ compatible = "qcom,sm8450-gpi-dma";
+ #dma-cells = <3>;
+ reg = <0 0x900000 0 0x60000>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7e>;
+ iommus = <&apps_smmu 0x5b6 0x0>;
+ status = "disabled";
};
qupv3_id_0: geniqup@9c0000 {
@@ -693,11 +1065,300 @@
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x5a3 0x0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
+ interconnect-names = "qup-core";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
+ i2c0: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00980000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_data_clk>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi0: spi@980000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00980000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
+ power-domains = <&rpmhpd SM8450_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00984000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi1: spi@984000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00984000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00988000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@988000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00988000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+
+ i2c3: i2c@98c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x0098c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi3: spi@98c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x0098c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00990000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi4: spi@990000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00990000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ power-domains = <&rpmhpd SM8450_CX>;
+ operating-points-v2 = <&qup_opp_table_100mhz>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@994000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00994000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi5: spi@994000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00994000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+
+ i2c6: i2c@998000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x998000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi6: spi@998000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x998000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart7: serial@99c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x0099c000 0 0x4000>;
@@ -712,17 +1373,242 @@
};
};
+ gpi_dma1: dma-controller@a00000 {
+ compatible = "qcom,sm8450-gpi-dma";
+ #dma-cells = <3>;
+ reg = <0 0xa00000 0 0x60000>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <12>;
+ dma-channel-mask = <0x7e>;
+ iommus = <&apps_smmu 0x56 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x00ac0000 0x0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x43 0x0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>;
+ interconnect-names = "qup-core";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
+ i2c8: i2c@a80000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00a80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_data_clk>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi8: spi@a80000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@a84000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00a84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c9_data_clk>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi9: spi@a84000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@a88000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00a88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_data_clk>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi10: spi@a88000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@a8c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00a8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c11_data_clk>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi11: spi@a8c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@a90000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x00a90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c12_data_clk>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ spi12: spi@a90000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c13: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
@@ -731,6 +1617,33 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_data_clk>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi13: spi@a94000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a94000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -744,12 +1657,257 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_data_clk>;
interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi14: spi@a98000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00a98000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
+ interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
+ interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
+ <&system_noc MASTER_A2NOC_SNOC 0 &gem_noc SLAVE_LLCC 0>,
+ <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
+ interconnect-names = "qup-core", "qup-config", "qup-memory";
+ dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
+ pcie0: pci@1c00000 {
+ compatible = "qcom,pcie-sm8450-pcie0";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+ <&pcie0_lane>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "aggre0",
+ "aggre1";
+
+ iommus = <&apps_smmu 0x1c00 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+ <0x100 &apps_smmu 0x1c01 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+ power-domain-names = "gdsc";
+
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x200>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_EN>,
+ <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie0_lane: phy@1c06200 {
+ reg = <0 0x1c06e00 0 0x200>, /* tx */
+ <0 0x1c07000 0 0x200>, /* rx */
+ <0 0x1c06200 0 0x200>, /* pcs */
+ <0 0x1c06600 0 0x200>; /* pcs_pcie */
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "pcie_0_pipe_clk";
+ };
+ };
+
+ pcie1: pci@1c08000 {
+ compatible = "qcom,pcie-sm8450-pcie1";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
+ <&pcie1_lane>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+ clock-names = "pipe",
+ "pipe_mux",
+ "phy_pipe",
+ "ref",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "ddrss_sf_tbu",
+ "aggre1";
+
+ iommus = <&apps_smmu 0x1c80 0x7f>;
+ iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
+ <0x100 &apps_smmu 0x1c81 0x1>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+ power-domain-names = "gdsc";
+
+ phys = <&pcie1_lane>;
+ phy-names = "pciephy";
+
+ perst-gpio = <&tlmm 97 GPIO_ACTIVE_LOW>;
+ enable-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0f000 {
+ compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy";
+ reg = <0 0x01c0f000 0 0x200>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_CLKREF_EN>,
+ <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+
+ pcie1_lane: phy@1c0e000 {
+ reg = <0 0x1c0e000 0 0x200>, /* tx */
+ <0 0x1c0e200 0 0x300>, /* rx */
+ <0 0x1c0f200 0 0x200>, /* pcs */
+ <0 0x1c0e800 0 0x200>, /* tx */
+ <0 0x1c0ea00 0 0x300>, /* rx */
+ <0 0x1c0f400 0 0xc00>; /* pcs_pcie */
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe0";
+
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "pcie_1_pipe_clk";
+ };
+ };
+
config_noc: interconnect@1500000 {
compatible = "qcom,sm8450-config-noc";
reg = <0 0x01500000 0 0x1c000>;
@@ -887,6 +2045,33 @@
label = "slpi";
qcom,remote-pid = <3>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "sdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x0541 0x0>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x0542 0x0>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x0543 0x0>;
+ /* note: shared-cb = <4> in downstream */
+ };
+ };
};
};
@@ -927,6 +2112,32 @@
label = "lpass";
qcom,remote-pid = <2>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "adsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x1803 0x0>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x1804 0x0>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x1805 0x0>;
+ };
+ };
};
};
@@ -967,6 +2178,72 @@
label = "cdsp";
qcom,remote-pid = <5>;
+
+ fastrpc {
+ compatible = "qcom,fastrpc";
+ qcom,glink-channels = "fastrpcglink-apps-dsp";
+ label = "cdsp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compute-cb@1 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <1>;
+ iommus = <&apps_smmu 0x2161 0x0400>,
+ <&apps_smmu 0x1021 0x1420>;
+ };
+
+ compute-cb@2 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <2>;
+ iommus = <&apps_smmu 0x2162 0x0400>,
+ <&apps_smmu 0x1022 0x1420>;
+ };
+
+ compute-cb@3 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <3>;
+ iommus = <&apps_smmu 0x2163 0x0400>,
+ <&apps_smmu 0x1023 0x1420>;
+ };
+
+ compute-cb@4 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <4>;
+ iommus = <&apps_smmu 0x2164 0x0400>,
+ <&apps_smmu 0x1024 0x1420>;
+ };
+
+ compute-cb@5 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <5>;
+ iommus = <&apps_smmu 0x2165 0x0400>,
+ <&apps_smmu 0x1025 0x1420>;
+ };
+
+ compute-cb@6 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <6>;
+ iommus = <&apps_smmu 0x2166 0x0400>,
+ <&apps_smmu 0x1026 0x1420>;
+ };
+
+ compute-cb@7 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <7>;
+ iommus = <&apps_smmu 0x2167 0x0400>,
+ <&apps_smmu 0x1027 0x1420>;
+ };
+
+ compute-cb@8 {
+ compatible = "qcom,fastrpc-compute-cb";
+ reg = <8>;
+ iommus = <&apps_smmu 0x2168 0x0400>,
+ <&apps_smmu 0x1028 0x1420>;
+ };
+
+ /* note: secure cb9 in downstream */
+ };
};
};
@@ -1021,6 +2298,28 @@
interrupt-controller;
};
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1000>, /* TM */
+ <0 0x0c222000 0 0x1000>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sm8450-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1000>, /* TM */
+ <0 0x0c223000 0 0x1000>; /* SROT */
+ #qcom,sensors = <16>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
@@ -1051,6 +2350,112 @@
gpio-ranges = <&tlmm 0 0 211>;
wakeup-parent = <&pdc>;
+ pcie0_default_state: pcie0-default-state {
+ perst {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio95";
+ function = "pcie0_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq {
+ pins = "gpio98";
+ function = "pcie1_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ qup_i2c0_data_clk: qup-i2c0-data-clk {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ qup_i2c1_data_clk: qup-i2c1-data-clk {
+ pins = "gpio4", "gpio5";
+ function = "qup1";
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk {
+ pins = "gpio8", "gpio9";
+ function = "qup2";
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk {
+ pins = "gpio12", "gpio13";
+ function = "qup3";
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk {
+ pins = "gpio16", "gpio17";
+ function = "qup4";
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk {
+ pins = "gpio206", "gpio207";
+ function = "qup5";
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk {
+ pins = "gpio20", "gpio21";
+ function = "qup6";
+ };
+
+ qup_i2c8_data_clk: qup-i2c8-data-clk {
+ pins = "gpio28", "gpio29";
+ function = "qup8";
+ };
+
+ qup_i2c9_data_clk: qup-i2c9-data-clk {
+ pins = "gpio32", "gpio33";
+ function = "qup9";
+ };
+
+ qup_i2c10_data_clk: qup-i2c10-data-clk {
+ pins = "gpio36", "gpio37";
+ function = "qup10";
+ };
+
+ qup_i2c11_data_clk: qup-i2c11-data-clk {
+ pins = "gpio40", "gpio41";
+ function = "qup11";
+ };
+
+ qup_i2c12_data_clk: qup-i2c12-data-clk {
+ pins = "gpio44", "gpio45";
+ function = "qup12";
+ };
+
qup_i2c13_data_clk: qup-i2c13-data-clk {
pins = "gpio48", "gpio49";
function = "qup13";
@@ -1065,6 +2470,261 @@
bias-pull-up;
};
+ qup_i2c15_data_clk: qup-i2c15-data-clk {
+ pins = "gpio56", "gpio57";
+ function = "qup15";
+ };
+
+ qup_i2c16_data_clk: qup-i2c16-data-clk {
+ pins = "gpio60", "gpio61";
+ function = "qup16";
+ };
+
+ qup_i2c17_data_clk: qup-i2c17-data-clk {
+ pins = "gpio64", "gpio65";
+ function = "qup17";
+ };
+
+ qup_i2c18_data_clk: qup-i2c18-data-clk {
+ pins = "gpio68", "gpio69";
+ function = "qup18";
+ };
+
+ qup_i2c19_data_clk: qup-i2c19-data-clk {
+ pins = "gpio72", "gpio73";
+ function = "qup19";
+ };
+
+ qup_i2c20_data_clk: qup-i2c20-data-clk {
+ pins = "gpio76", "gpio77";
+ function = "qup20";
+ };
+
+ qup_i2c21_data_clk: qup-i2c21-data-clk {
+ pins = "gpio80", "gpio81";
+ function = "qup21";
+ };
+
+ qup_spi0_cs: qup-spi0-cs {
+ pins = "gpio3";
+ function = "qup0";
+ };
+
+ qup_spi0_data_clk: qup-spi0-data-clk {
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup0";
+ };
+
+ qup_spi1_cs: qup-spi1-cs {
+ pins = "gpio7";
+ function = "qup1";
+ };
+
+ qup_spi1_data_clk: qup-spi1-data-clk {
+ pins = "gpio4", "gpio5", "gpio6";
+ function = "qup1";
+ };
+
+ qup_spi2_cs: qup-spi2-cs {
+ pins = "gpio11";
+ function = "qup2";
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk {
+ pins = "gpio8", "gpio9", "gpio10";
+ function = "qup2";
+ };
+
+ qup_spi3_cs: qup-spi3-cs {
+ pins = "gpio15";
+ function = "qup3";
+ };
+
+ qup_spi3_data_clk: qup-spi3-data-clk {
+ pins = "gpio12", "gpio13", "gpio14";
+ function = "qup3";
+ };
+
+ qup_spi4_cs: qup-spi4-cs {
+ pins = "gpio19";
+ function = "qup4";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk {
+ pins = "gpio16", "gpio17", "gpio18";
+ function = "qup4";
+ };
+
+ qup_spi5_cs: qup-spi5-cs {
+ pins = "gpio85";
+ function = "qup5";
+ };
+
+ qup_spi5_data_clk: qup-spi5-data-clk {
+ pins = "gpio206", "gpio207", "gpio84";
+ function = "qup5";
+ };
+
+ qup_spi6_cs: qup-spi6-cs {
+ pins = "gpio23";
+ function = "qup6";
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk {
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup6";
+ };
+
+ qup_spi8_cs: qup-spi8-cs {
+ pins = "gpio31";
+ function = "qup8";
+ };
+
+ qup_spi8_data_clk: qup-spi8-data-clk {
+ pins = "gpio28", "gpio29", "gpio30";
+ function = "qup8";
+ };
+
+ qup_spi9_cs: qup-spi9-cs {
+ pins = "gpio35";
+ function = "qup9";
+ };
+
+ qup_spi9_data_clk: qup-spi9-data-clk {
+ pins = "gpio32", "gpio33", "gpio34";
+ function = "qup9";
+ };
+
+ qup_spi10_cs: qup-spi10-cs {
+ pins = "gpio39";
+ function = "qup10";
+ };
+
+ qup_spi10_data_clk: qup-spi10-data-clk {
+ pins = "gpio36", "gpio37", "gpio38";
+ function = "qup10";
+ };
+
+ qup_spi11_cs: qup-spi11-cs {
+ pins = "gpio43";
+ function = "qup11";
+ };
+
+ qup_spi11_data_clk: qup-spi11-data-clk {
+ pins = "gpio40", "gpio41", "gpio42";
+ function = "qup11";
+ };
+
+ qup_spi12_cs: qup-spi12-cs {
+ pins = "gpio47";
+ function = "qup12";
+ };
+
+ qup_spi12_data_clk: qup-spi12-data-clk {
+ pins = "gpio44", "gpio45", "gpio46";
+ function = "qup12";
+ };
+
+ qup_spi13_cs: qup-spi13-cs {
+ pins = "gpio51";
+ function = "qup13";
+ };
+
+ qup_spi13_data_clk: qup-spi13-data-clk {
+ pins = "gpio48", "gpio49", "gpio50";
+ function = "qup13";
+ };
+
+ qup_spi14_cs: qup-spi14-cs {
+ pins = "gpio55";
+ function = "qup14";
+ };
+
+ qup_spi14_data_clk: qup-spi14-data-clk {
+ pins = "gpio52", "gpio53", "gpio54";
+ function = "qup14";
+ };
+
+ qup_spi15_cs: qup-spi15-cs {
+ pins = "gpio59";
+ function = "qup15";
+ };
+
+ qup_spi15_data_clk: qup-spi15-data-clk {
+ pins = "gpio56", "gpio57", "gpio58";
+ function = "qup15";
+ };
+
+ qup_spi16_cs: qup-spi16-cs {
+ pins = "gpio63";
+ function = "qup16";
+ };
+
+ qup_spi16_data_clk: qup-spi16-data-clk {
+ pins = "gpio60", "gpio61", "gpio62";
+ function = "qup16";
+ };
+
+ qup_spi17_cs: qup-spi17-cs {
+ pins = "gpio67";
+ function = "qup17";
+ };
+
+ qup_spi17_data_clk: qup-spi17-data-clk {
+ pins = "gpio64", "gpio65", "gpio66";
+ function = "qup17";
+ };
+
+ qup_spi18_cs: qup-spi18-cs {
+ pins = "gpio71";
+ function = "qup18";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi18_data_clk: qup-spi18-data-clk {
+ pins = "gpio68", "gpio69", "gpio70";
+ function = "qup18";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_cs: qup-spi19-cs {
+ pins = "gpio75";
+ function = "qup19";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi19_data_clk: qup-spi19-data-clk {
+ pins = "gpio72", "gpio73", "gpio74";
+ function = "qup19";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ qup_spi20_cs: qup-spi20-cs {
+ pins = "gpio79";
+ function = "qup20";
+ };
+
+ qup_spi20_data_clk: qup-spi20-data-clk {
+ pins = "gpio76", "gpio77", "gpio78";
+ function = "qup20";
+ };
+
+ qup_spi21_cs: qup-spi21-cs {
+ pins = "gpio83";
+ function = "qup21";
+ };
+
+ qup_spi21_data_clk: qup-spi21-data-clk {
+ pins = "gpio80", "gpio81", "gpio82";
+ function = "qup21";
+ };
+
qup_uart7_rx: qup-uart7-rx {
pins = "gpio26";
function = "qup7";
@@ -1425,7 +3085,7 @@
reset-names = "ufsphy";
status = "disabled";
- ufs_mem_phy_lanes: lanes@1d87400 {
+ ufs_mem_phy_lanes: phy@1d87400 {
reg = <0 0x01d87400 0 0x108>,
<0 0x01d87600 0 0x1e0>,
<0 0x01d87c00 0 0x1dc>,
@@ -1495,6 +3155,840 @@
};
};
+ thermal-zones {
+ aoss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpuss4-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu4-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu4_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu4_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu5_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu5_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu6_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-top-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu7_top_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_top_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-middle-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu7_middle_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_middle_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_middle_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-bottom-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ cpu7_bottom_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_bottom_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-top-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu0_tj_cfg: tj_cfg {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ gpu-bottom-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens0 15>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ gpu1_tj_cfg: tj_cfg {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cdsp0-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_0_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cdsp1-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_1_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ cdsp2-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ thermal-hal-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ cdsp_2_config: junction-config {
+ temperature = <95000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <10>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ ddr_config0: ddr0-config {
+ temperature = <90000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss0_config0: mdmss0-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss0_config1: mdmss0-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 11>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss1_config0: mdmss1-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss1_config1: mdmss1-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 12>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss2_config0: mdmss2-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss2_config1: mdmss2-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ modem3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 13>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ mdmss3_config0: mdmss3-config0 {
+ temperature = <102000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ mdmss3_config1: mdmss3-config1 {
+ temperature = <105000>;
+ hysteresis = <3000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 14>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+
+ camera1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens1 15>;
+
+ trips {
+ thermal-engine-config {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ reset-mon-cfg {
+ temperature = <115000>;
+ hysteresis = <5000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d000f6b131dc..e66d76d42e52 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -65,6 +65,8 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
dtb-$(CONFIG_ARCH_R8A779F0) += r8a779f0-spider.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g0-white-hawk.dtb
+
dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
@@ -75,7 +77,11 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R9A07G043) += r9a07g043u11-smarc.dtb
+
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G011) += r9a09g011-v2mevk2.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 5ad6cd1864c1..142e7ffbd2bd 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -272,8 +272,14 @@
status = "okay";
};
-&du_out_rgb {
- remote-endpoint = <&rgb_panel>;
+&du {
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&rgb_panel>;
+ };
+ };
+ };
};
&ehci0 {
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index eb0327c0df48..7231f820d601 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -285,7 +285,7 @@
ports {
port@0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&adv7123_in>;
};
};
@@ -541,6 +541,12 @@
function = "pwm1";
};
+ rpc_pins: rpc {
+ groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+ "rpc_int";
+ function = "rpc";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
@@ -630,6 +636,58 @@
};
};
+&rpc {
+ pinctrl-0 = <&rpc_pins>;
+ pinctrl-names = "default";
+
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi
index 67231c8576c5..72f359efa23e 100644
--- a/arch/arm64/boot/dts/renesas/ebisu.dtsi
+++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi
@@ -356,7 +356,7 @@
ports {
port@0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&adv7123_in>;
};
};
@@ -600,6 +600,12 @@
function = "pwm5";
};
+ rpc_pins: rpc {
+ groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
+ "rpc_int";
+ function = "rpc";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
@@ -711,6 +717,58 @@
};
+&rpc {
+ pinctrl-0 = <&rpc_pins>;
+ pinctrl-names = "default";
+
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 12846125a4c9..e7d17776624d 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -283,6 +283,7 @@
compatible = "renesas,r8a774a1-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1178,6 +1179,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774A1_CLK_CANFD>,
<&can_clk>;
@@ -2737,8 +2739,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2775,8 +2775,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index a4b406a346f9..f62d95760e82 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -156,6 +156,7 @@
compatible = "renesas,r8a774b1-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1051,6 +1052,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774B1_CLK_CANFD>,
<&can_clk>;
@@ -2582,8 +2584,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2620,8 +2620,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index 4e72e4f2bab0..5a6ea08ffd2b 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -172,7 +172,7 @@
ports {
port@0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&tda19988_in>;
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index e123c8d1bab9..b6aeb22e8836 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -145,6 +145,7 @@
compatible = "renesas,r8a774c0-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1008,6 +1009,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774C0_CLK_CANFD>,
<&can_clk>;
@@ -1870,8 +1872,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1913,8 +1913,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1940,8 +1938,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 989c1c00dcdc..8ec59094882b 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1280,6 +1280,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774E1_CLK_CANFD>,
<&can_clk>;
@@ -2857,8 +2858,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2895,8 +2894,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 4e87e8776a2b..a297af22a195 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -369,6 +369,7 @@
rwdt: watchdog@e6020000 {
compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1367,6 +1368,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A7795_CLK_CANFD>,
<&can_clk>;
@@ -2731,6 +2733,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a7795-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a7795",
"renesas,rcar-gen3-sata";
@@ -3334,8 +3352,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -3378,8 +3394,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 6f79da8cc8c0..4159c23d3874 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -334,6 +334,7 @@
compatible = "renesas,r8a7796-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1239,6 +1240,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A7796_CLK_CANFD>,
<&can_clk>;
@@ -2531,6 +2533,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a7796-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -2937,8 +2955,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2975,8 +2991,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 68cbbb322acf..3c744b7d0dc4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -323,6 +323,7 @@
compatible = "renesas,r8a77961-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1222,6 +1223,32 @@
status = "disabled";
};
+ canfd: can@e66c0000 {
+ compatible = "renesas,r8a77961-canfd",
+ "renesas,rcar-gen3-canfd";
+ reg = <0 0xe66c0000 0 0x8000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
+ clocks = <&cpg CPG_MOD 914>,
+ <&cpg CPG_CORE R8A77961_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
+ assigned-clock-rates = <40000000>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 914>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77961", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 8>;
@@ -2375,6 +2402,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77961-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -2722,8 +2765,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2760,8 +2801,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 9f858af8b762..21a5e1cdd9f1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -205,6 +205,7 @@
compatible = "renesas,r8a77965-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1102,6 +1103,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77965_CLK_CANFD>,
<&can_clk>;
@@ -2378,6 +2380,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77965-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
sata: sata@ee300000 {
compatible = "renesas,sata-r8a77965",
"renesas,rcar-gen3-sata";
@@ -2749,8 +2767,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2787,8 +2803,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 517892cf6294..2703ef3a38c2 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -108,6 +108,7 @@
compatible = "renesas,r8a77970-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -556,6 +557,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77970_CLK_CANFD>,
<&can_clk>;
@@ -1156,8 +1158,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1190,8 +1190,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 347c068ff2c5..8594be72f221 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -138,6 +138,7 @@
compatible = "renesas,r8a77980-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -608,6 +609,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77980_CLK_CANFD>,
<&can_clk>;
@@ -1533,8 +1535,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1568,8 +1568,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 7e0f1aab2135..d33021202637 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -171,6 +171,7 @@
compatible = "renesas,r8a77990-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -1051,6 +1052,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77990_CLK_CANFD>,
<&can_clk>;
@@ -1837,6 +1839,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77990-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -2031,8 +2049,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -2074,8 +2090,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2101,8 +2115,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index cac1f9467ffa..f040d03e0a87 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -94,6 +94,7 @@
compatible = "renesas,r8a77995-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -556,6 +557,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A77995_CLK_CANFD>,
<&can_clk>;
@@ -1237,6 +1239,22 @@
status = "disabled";
};
+ rpc: spi@ee200000 {
+ compatible = "renesas,r8a77995-rpc-if",
+ "renesas,rcar-gen3-rpc-if";
+ reg = <0 0xee200000 0 0x200>,
+ <0 0x08000000 0 0x04000000>,
+ <0 0xee208000 0 0x100>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 917>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -1350,8 +1368,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
@@ -1393,8 +1409,6 @@
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -1420,8 +1434,6 @@
port@1 {
reg = <1>;
- lvds1_out: endpoint {
- };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 6af3f4f4f268..53c4a26198e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -192,14 +192,17 @@
clock-frequency = <400000>;
bridge@2c {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
compatible = "ti,sn65dsi86";
reg = <0x2c>;
clocks = <&sn65dsi86_refclk>;
clock-names = "refclk";
- interrupt-parent = <&gpio1>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
vccio-supply = <&reg_1p8v>;
vpll-supply = <&reg_1p8v>;
@@ -271,6 +274,11 @@
function = "i2c6";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
keys_pins: keys {
pins = "GP_6_18", "GP_6_19", "GP_6_20";
bias-pull-up;
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
index e46dc9aa0a43..b2e67b82caf6 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
@@ -37,6 +37,20 @@
};
};
+&canfd {
+ pinctrl-0 = <&canfd0_pins>, <&canfd1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
&i2c0 {
eeprom@51 {
compatible = "rohm,br24g01", "atmel,24c01";
@@ -65,4 +79,14 @@
};
};
+
+ canfd0_pins: canfd0 {
+ groups = "canfd0_data";
+ function = "canfd0";
+ };
+
+ canfd1_pins: canfd1 {
+ groups = "canfd1_data";
+ function = "canfd1";
+ };
};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index c4be288b1912..b9731504b7cd 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -24,6 +24,13 @@
i2c6 = &i2c6;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -79,8 +86,9 @@
rwdt: watchdog@e6020000 {
compatible = "renesas,r8a779a0-wdt",
- "renesas,rcar-gen3-wdt";
+ "renesas,rcar-gen4-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 907>;
@@ -422,7 +430,7 @@
i2c0: i2c@e6500000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6500000 0 0x40>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 518>;
@@ -438,7 +446,7 @@
i2c1: i2c@e6508000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6508000 0 0x40>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 519>;
@@ -454,7 +462,7 @@
i2c2: i2c@e6510000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 520>;
@@ -470,7 +478,7 @@
i2c3: i2c@e66d0000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66d0000 0 0x40>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 521>;
@@ -486,7 +494,7 @@
i2c4: i2c@e66d8000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66d8000 0 0x40>;
interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
@@ -502,7 +510,7 @@
i2c5: i2c@e66e0000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66e0000 0 0x40>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 523>;
@@ -518,7 +526,7 @@
i2c6: i2c@e66e8000 {
compatible = "renesas,i2c-r8a779a0",
- "renesas,rcar-gen3-i2c";
+ "renesas,rcar-gen4-i2c";
reg = <0 0xe66e8000 0 0x40>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 524>;
@@ -534,7 +542,7 @@
hscif0: serial@e6540000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6540000 0 0x60>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 514>,
@@ -550,7 +558,7 @@
hscif1: serial@e6550000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6550000 0 0x60>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 515>,
@@ -566,7 +574,7 @@
hscif2: serial@e6560000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe6560000 0 0x60>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 516>,
@@ -582,7 +590,7 @@
hscif3: serial@e66a0000 {
compatible = "renesas,hscif-r8a779a0",
- "renesas,rcar-gen3-hscif", "renesas,hscif";
+ "renesas,rcar-gen4-hscif", "renesas,hscif";
reg = <0 0xe66a0000 0 0x60>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 517>,
@@ -596,6 +604,55 @@
status = "disabled";
};
+ canfd: can@e6660000 {
+ compatible = "renesas,r8a779a0-canfd";
+ reg = <0 0xe6660000 0 0x8000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
+ clocks = <&cpg CPG_MOD 328>,
+ <&cpg CPG_CORE R8A779A0_CLK_CANFD>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R8A779A0_CLK_CANFD>;
+ assigned-clock-rates = <80000000>;
+ power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+ resets = <&cpg 328>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+
+ channel1 {
+ status = "disabled";
+ };
+
+ channel2 {
+ status = "disabled";
+ };
+
+ channel3 {
+ status = "disabled";
+ };
+
+ channel4 {
+ status = "disabled";
+ };
+
+ channel5 {
+ status = "disabled";
+ };
+
+ channel6 {
+ status = "disabled";
+ };
+
+ channel7 {
+ status = "disabled";
+ };
+ };
+
avb0: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a779a0",
"renesas,etheravb-rcar-gen3";
@@ -886,7 +943,7 @@
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>,
@@ -902,7 +959,7 @@
scif1: serial@e6e68000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>,
@@ -918,7 +975,7 @@
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>,
@@ -934,7 +991,7 @@
scif4: serial@e6c40000 {
compatible = "renesas,scif-r8a779a0",
- "renesas,rcar-gen3-scif", "renesas,scif";
+ "renesas,rcar-gen4-scif", "renesas,scif";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 705>,
@@ -1946,7 +2003,8 @@
};
dmac1: dma-controller@e7350000 {
- compatible = "renesas,dmac-r8a779a0";
+ compatible = "renesas,dmac-r8a779a0",
+ "renesas,rcar-gen4-dmac";
reg = <0 0xe7350000 0 0x1000>,
<0 0xe7300000 0 0x10000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
@@ -1980,7 +2038,8 @@
};
dmac2: dma-controller@e7351000 {
- compatible = "renesas,dmac-r8a779a0";
+ compatible = "renesas,dmac-r8a779a0",
+ "renesas,rcar-gen4-dmac";
reg = <0 0xe7351000 0 0x1000>,
<0 0xe7310000 0 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
@@ -2035,7 +2094,8 @@
};
ipmmu_rt0: iommu@ee480000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xee480000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2043,7 +2103,8 @@
};
ipmmu_rt1: iommu@ee4c0000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xee4c0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 19>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2051,7 +2112,8 @@
};
ipmmu_ds0: iommu@eed00000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeed00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2059,7 +2121,8 @@
};
ipmmu_ds1: iommu@eed40000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeed40000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2067,7 +2130,8 @@
};
ipmmu_ir: iommu@eed80000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeed80000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
power-domains = <&sysc R8A779A0_PD_A3IR>;
@@ -2075,7 +2139,8 @@
};
ipmmu_vc0: iommu@eedc0000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeedc0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2083,7 +2148,8 @@
};
ipmmu_vi0: iommu@eee80000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeee80000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2091,7 +2157,8 @@
};
ipmmu_vi1: iommu@eeec0000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeeec0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 15>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2099,7 +2166,8 @@
};
ipmmu_3dg: iommu@eee00000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeee00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2107,7 +2175,8 @@
};
ipmmu_vip0: iommu@eef00000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeef00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2115,7 +2184,8 @@
};
ipmmu_vip1: iommu@eef40000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeef40000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 11>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2123,7 +2193,8 @@
};
ipmmu_mm: iommu@eefc0000 {
- compatible = "renesas,ipmmu-r8a779a0";
+ compatible = "renesas,ipmmu-r8a779a0",
+ "renesas,rcar-gen4-ipmmu-vmsa";
reg = <0 0xeefc0000 0 0x20000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index 6e07c54148e7..41aa8591b3b1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -31,10 +31,30 @@
clock-frequency = <32768>;
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom@50 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "cpu-board";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
+};
+
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
+ i2c4_pins: i2c4 {
+ groups = "i2c4";
+ function = "i2c4";
+ };
+
scif3_pins: scif3 {
groups = "scif3_data", "scif3_ctrl";
function = "scif3";
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
new file mode 100644
index 000000000000..15e8d1ebf575
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-ethernet.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Spider Ethernet sub-board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+&i2c4 {
+ eeprom@52 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "ethernet-sub-board";
+ reg = <0x52>;
+ pagesize = <8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
index f286254b41d8..2e3b719cc749 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider.dts
@@ -7,6 +7,7 @@
/dts-v1/;
#include "r8a779f0-spider-cpu.dtsi"
+#include "r8a779f0-spider-ethernet.dtsi"
/ {
model = "Renesas Spider CPU and Breakout boards based on r8a779f0";
@@ -20,3 +21,12 @@
stdout-path = "serial0:115200n8";
};
};
+
+&i2c4 {
+ eeprom@51 {
+ compatible = "rohm,br24g01", "atmel,24c01";
+ label = "breakout-board";
+ reg = <0x51>;
+ pagesize = <8>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index f4e549867371..df46fb87cffc 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -63,6 +63,7 @@
compatible = "renesas,r8a779f0-wdt",
"renesas,rcar-gen4-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
resets = <&cpg 907>;
@@ -75,6 +76,66 @@
<0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
};
+ gpio0: gpio@e6050180 {
+ compatible = "renesas,gpio-r8a779f0",
+ "renesas,rcar-gen4-gpio";
+ reg = <0 0xe6050180 0 0x54>;
+ interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 21>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@e6050980 {
+ compatible = "renesas,gpio-r8a779f0",
+ "renesas,rcar-gen4-gpio";
+ reg = <0 0xe6050980 0 0x54>;
+ interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 32 25>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@e6051180 {
+ compatible = "renesas,gpio-r8a779f0",
+ "renesas,rcar-gen4-gpio";
+ reg = <0 0xe6051180 0 0x54>;
+ interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 64 17>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@e6051980 {
+ compatible = "renesas,gpio-r8a779f0",
+ "renesas,rcar-gen4-gpio";
+ reg = <0 0xe6051980 0 0x54>;
+ interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 915>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 915>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 96 19>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a779f0-cpg-mssr";
reg = <0 0xe6150000 0 0x4000>;
@@ -96,6 +157,108 @@
#power-domain-cells = <1>;
};
+ i2c0: i2c@e6500000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 518>;
+ dmas = <&dmac0 0x91>, <&dmac0 0x90>,
+ <&dmac1 0x91>, <&dmac1 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ dmas = <&dmac0 0x93>, <&dmac0 0x92>,
+ <&dmac1 0x93>, <&dmac1 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 520>;
+ dmas = <&dmac0 0x95>, <&dmac0 0x94>,
+ <&dmac1 0x95>, <&dmac1 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 521>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 521>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>,
+ <&dmac1 0x97>, <&dmac1 0x96>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 522>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>,
+ <&dmac1 0x99>, <&dmac1 0x98>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ compatible = "renesas,i2c-r8a779f0",
+ "renesas,rcar-gen4-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>,
+ <&dmac1 0x9b>, <&dmac1 0x9a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
scif3: serial@e6c50000 {
compatible = "renesas,scif-r8a779f0",
"renesas,rcar-gen4-scif", "renesas,scif";
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
new file mode 100644
index 000000000000..ea4ae4b893ab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include "r8a779g0.dtsi"
+
+/ {
+ model = "Renesas White Hawk CPU board";
+ compatible = "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@480000000 {
+ device_type = "memory";
+ reg = <0x4 0x80000000 0x0 0x80000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x1 0x00000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&hscif0 {
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
new file mode 100644
index 000000000000..bc0ac109b17c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the White Hawk CPU and BreakOut boards
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a779g0-white-hawk-cpu.dtsi"
+
+/ {
+ model = "Renesas White Hawk CPU and Breakout boards based on r8a779g0";
+ compatible = "renesas,white-hawk-breakout", "renesas,white-hawk-cpu", "renesas,r8a779g0";
+
+ aliases {
+ serial0 = &hscif0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
new file mode 100644
index 000000000000..7cbb0de060dd
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the R-Car V4H (R8A779G0) SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a779g0-sysc.h>
+
+/ {
+ compatible = "renesas,r8a779g0";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a76_0: cpu@0 {
+ compatible = "arm,cortex-a76";
+ reg = <0>;
+ device_type = "cpu";
+ power-domains = <&sysc R8A779G0_PD_A1E0D0C0>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ pmu_a76 {
+ compatible = "arm,cortex-a76-pmu";
+ interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a779g0-cpg-mssr";
+ reg = <0 0xe6150000 0 0x4000>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a779g0-rst";
+ reg = <0 0xe6160000 0 0x4000>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a779g0-sysc";
+ reg = <0 0xe6180000 0 0x4000>;
+ #power-domain-cells = <1>;
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a779g0",
+ "renesas,rcar-gen4-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 96>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 514>,
+ <&cpg CPG_CORE R8A779G0_CLK_S0D3_PER>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+ resets = <&cpg 514>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1000000 0 0x20000>,
+ <0x0 0xf1060000 0 0x110000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
new file mode 100644
index 000000000000..b31fb713ae4d
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -0,0 +1,885 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g043-cpg.h>
+
+/ {
+ compatible = "renesas,r9a07g043";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ audio_clk1: audio-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by boards that provide it */
+ clock-frequency = <0>;
+ };
+
+ audio_clk2: audio-clk2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by boards that provide it */
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+ extal_clk: extal-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a55";
+ reg = <0>;
+ device_type = "cpu";
+ #cooling-cells = <2>;
+ next-level-cache = <&L3_CA55>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE R9A07G043_CLK_I>;
+ operating-points-v2 = <&cluster0_opp>;
+ };
+
+ L3_CA55: cache-controller-0 {
+ compatible = "cache";
+ cache-unified;
+ cache-size = <0x40000>;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ssi0: ssi@10049c00 {
+ compatible = "renesas,r9a07g043-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x10049c00 0 0x400>;
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
+ <&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G043_SSI0_RST_M2_REG>;
+ dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi1: ssi@1004a000 {
+ compatible = "renesas,r9a07g043-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a000 0 0x400>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
+ <&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G043_SSI1_RST_M2_REG>;
+ dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@1004a400 {
+ compatible = "renesas,r9a07g043-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a400 0 0x400>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
+ <&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G043_SSI2_RST_M2_REG>;
+ dmas = <&dmac 0x265f>;
+ dma-names = "rt";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@1004a800 {
+ compatible = "renesas,r9a07g043-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a800 0 0x400>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
+ <&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G043_SSI3_RST_M2_REG>;
+ dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@1004ac00 {
+ compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004ac00 0 0x400>;
+ interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
+ resets = <&cpg R9A07G043_RSPI0_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@1004b000 {
+ compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004b000 0 0x400>;
+ interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
+ resets = <&cpg R9A07G043_RSPI1_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@1004b400 {
+ compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004b400 0 0x400>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
+ resets = <&cpg R9A07G043_RSPI2_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ scif0: serial@1004b800 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004b800 0 0x400>;
+ interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif1: serial@1004bc00 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004bc00 0 0x400>;
+ interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF1_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif2: serial@1004c000 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004c000 0 0x400>;
+ interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF2_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif3: serial@1004c400 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004c400 0 0x400>;
+ interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF3_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ scif4: serial@1004c800 {
+ compatible = "renesas,scif-r9a07g043",
+ "renesas,scif-r9a07g044";
+ reg = <0 0x1004c800 0 0x400>;
+ interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi",
+ "bri", "dri", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCIF4_RST_SYSTEM_N>;
+ status = "disabled";
+ };
+
+ sci0: serial@1004d000 {
+ compatible = "renesas,r9a07g043-sci", "renesas,sci";
+ reg = <0 0x1004d000 0 0x400>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCI0_RST>;
+ status = "disabled";
+ };
+
+ sci1: serial@1004d400 {
+ compatible = "renesas,r9a07g043-sci", "renesas,sci";
+ reg = <0 0x1004d400 0 0x400>;
+ interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_SCI1_RST>;
+ status = "disabled";
+ };
+
+ canfd: can@10050000 {
+ compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
+ reg = <0 0x10050000 0 0x8000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g_err", "g_recc",
+ "ch0_err", "ch0_rec", "ch0_trx",
+ "ch1_err", "ch1_rec", "ch1_trx";
+ clocks = <&cpg CPG_MOD R9A07G043_CANFD_PCLK>,
+ <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R9A07G043_CLK_P0_DIV2>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cpg R9A07G043_CANFD_RSTP_N>,
+ <&cpg R9A07G043_CANFD_RSTC_N>;
+ reset-names = "rstp_n", "rstc_n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+ channel1 {
+ status = "disabled";
+ };
+ };
+
+ i2c0: i2c@10058000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+ reg = <0 0x10058000 0 0x400>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G043_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@10058400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+ reg = <0 0x10058400 0 0x400>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G043_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G043_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@10058c00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
+ reg = <0 0x10058c00 0 0x400>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G043_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ adc: adc@10059000 {
+ reg = <0 0x10059000 0 0x400>;
+ /* place holder */
+ };
+
+ tsu: thermal@10059400 {
+ compatible = "renesas,r9a07g043-tsu",
+ "renesas,rzg2l-tsu";
+ reg = <0 0x10059400 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G043_TSU_PCLK>;
+ resets = <&cpg R9A07G043_TSU_PRESETN>;
+ power-domains = <&cpg>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ sbc: spi@10060000 {
+ compatible = "renesas,r9a07g043-rpc-if",
+ "renesas,rzg2l-rpc-if";
+ reg = <0 0x10060000 0 0x10000>,
+ <0 0x20000000 0 0x10000000>,
+ <0 0x10070000 0 0x10000>;
+ reg-names = "regs", "dirmap", "wbuf";
+ clocks = <&cpg CPG_MOD R9A07G043_SPI_CLK2>,
+ <&cpg CPG_MOD R9A07G043_SPI_CLK>;
+ resets = <&cpg R9A07G043_SPI_RST>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ cpg: clock-controller@11010000 {
+ compatible = "renesas,r9a07g043-cpg";
+ reg = <0 0x11010000 0 0x10000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller@11020000 {
+ compatible = "renesas,r9a07g043-sysc";
+ reg = <0 0x11020000 0 0x10000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpm_int", "ca55stbydone_int",
+ "cm33stbyr_int", "ca55_deny";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@11030000 {
+ compatible = "renesas,r9a07g043-pinctrl";
+ reg = <0 0x11030000 0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 152>;
+ clocks = <&cpg CPG_MOD R9A07G043_GPIO_HCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_GPIO_RSTN>,
+ <&cpg R9A07G043_GPIO_PORT_RESETN>,
+ <&cpg R9A07G043_GPIO_SPARE_RESETN>;
+ };
+
+ dmac: dma-controller@11820000 {
+ compatible = "renesas,r9a07g043-dmac",
+ "renesas,rz-dmac";
+ reg = <0 0x11820000 0 0x10000>,
+ <0 0x11830000 0 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD R9A07G043_DMAC_ACLK>,
+ <&cpg CPG_MOD R9A07G043_DMAC_PCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G043_DMAC_ARESETN>,
+ <&cpg R9A07G043_DMAC_RST_ASYNC>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ gic: interrupt-controller@11900000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x11900000 0 0x40000>,
+ <0x0 0x11940000 0 0x60000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ sdhi0: mmc@11c00000 {
+ compatible = "renesas,sdhi-r9a07g043",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0x0 0x11c00000 0 0x10000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
+ <&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
+ <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
+ <&cpg CPG_MOD R9A07G043_SDHI0_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G043_SDHI0_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi1: mmc@11c10000 {
+ compatible = "renesas,sdhi-r9a07g043",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0x0 0x11c10000 0 0x10000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
+ <&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
+ <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
+ <&cpg CPG_MOD R9A07G043_SDHI1_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G043_SDHI1_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ eth0: ethernet@11c20000 {
+ compatible = "renesas,r9a07g043-gbeth",
+ "renesas,rzg2l-gbeth";
+ reg = <0 0x11c20000 0 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
+ <&cpg CPG_MOD R9A07G043_ETH0_CLK_CHI>,
+ <&cpg CPG_CORE R9A07G043_CLK_HP>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A07G043_ETH0_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ eth1: ethernet@11c30000 {
+ compatible = "renesas,r9a07g043-gbeth",
+ "renesas,rzg2l-gbeth";
+ reg = <0 0x11c30000 0 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mux", "fil", "arp_ns";
+ phy-mode = "rgmii";
+ clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
+ <&cpg CPG_MOD R9A07G043_ETH1_CLK_CHI>,
+ <&cpg CPG_CORE R9A07G043_CLK_HP>;
+ clock-names = "axi", "chi", "refclk";
+ resets = <&cpg R9A07G043_ETH1_RST_HW_N>;
+ power-domains = <&cpg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ phyrst: usbphy-ctrl@11c40000 {
+ compatible = "renesas,r9a07g043-usbphy-ctrl",
+ "renesas,rzg2l-usbphy-ctrl";
+ reg = <0 0x11c40000 0 0x10000>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>;
+ resets = <&cpg R9A07G043_USB_PRESETN>;
+ power-domains = <&cpg>;
+ #reset-cells = <1>;
+ status = "disabled";
+ };
+
+ ohci0: usb@11c50000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c50000 0 0x100>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G043_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb@11c70000 {
+ compatible = "generic-ohci";
+ reg = <0 0x11c70000 0 0x100>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G043_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb@11c50100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c50100 0 0x100>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G043_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb@11c70100 {
+ compatible = "generic-ehci";
+ reg = <0 0x11c70100 0 0x100>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G043_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@11c50200 {
+ compatible = "renesas,usb2-phy-r9a07g043",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c50200 0 0x700>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@11c70200 {
+ compatible = "renesas,usb2-phy-r9a07g043",
+ "renesas,rzg2l-usb2-phy";
+ reg = <0 0x11c70200 0 0x700>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ hsusb: usb@11c60000 {
+ compatible = "renesas,usbhs-r9a07g043",
+ "renesas,rza2-usbhs";
+ reg = <0 0x11c60000 0 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G043_USB_U2P_EXL_SYSRST>;
+ renesas,buswait = <7>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@12800800 {
+ compatible = "renesas,r9a07g043-wdt",
+ "renesas,rzg2l-wdt";
+ reg = <0 0x12800800 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
+ <&cpg CPG_MOD R9A07G043_WDT0_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G043_WDT0_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ wdt2: watchdog@12800400 {
+ compatible = "renesas,r9a07g043-wdt",
+ "renesas,rzg2l-wdt";
+ reg = <0 0x12800400 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G043_WDT2_PCLK>,
+ <&cpg CPG_MOD R9A07G043_WDT2_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G043_WDT2_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm0: timer@12801000 {
+ compatible = "renesas,r9a07g043-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801000 0x0 0x400>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
+ resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm1: timer@12801400 {
+ compatible = "renesas,r9a07g043-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801400 0x0 0x400>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
+ resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ostm2: timer@12801800 {
+ compatible = "renesas,r9a07g043-ostm",
+ "renesas,ostm";
+ reg = <0x0 0x12801800 0x0 0x400>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
+ resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsu 0>;
+ sustainable-power = <717>;
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 0 2>;
+ contribution = <1024>;
+ };
+ };
+
+ trips {
+ sensor_crit: sensor-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ target: trip-point {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
new file mode 100644
index 000000000000..2d740bd420ca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g043.dtsi"
+#include "rzg2ul-smarc.dtsi"
+
+/ {
+ model = "Renesas SMARC EVK based on r9a07g043u11";
+ compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043";
+};
+
+&spi1 {
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 19287cccb1f0..3652e511160f 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -13,14 +13,14 @@
#address-cells = <2>;
#size-cells = <2>;
- audio_clk1: audio_clk1 {
+ audio_clk1: audio1-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
- audio_clk2: audio_clk2 {
+ audio_clk2: audio2-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
@@ -28,14 +28,14 @@
};
/* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ can_clk: can-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
- extal_clk: extal {
+ extal_clk: extal-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
index 5a5cea82a5d9..fc34058002e2 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -13,79 +13,3 @@
model = "Renesas SMARC EVK based on r9a07g044c2";
compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
};
-
-&ehci0 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&ehci1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&hsusb {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&i2c0 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&i2c1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&i2c3 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&ohci0 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&ohci1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&phyrst {
- status = "disabled";
-};
-
-&spi1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&ssi0 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&usb2_phy0 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
-
-&usb2_phy1 {
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- status = "disabled";
-};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
index 5d39e765c291..4d6b9d7684c9 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -13,14 +13,14 @@
#address-cells = <2>;
#size-cells = <2>;
- audio_clk1: audio_clk1 {
+ audio_clk1: audio1-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
- audio_clk2: audio_clk2 {
+ audio_clk2: audio2-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
@@ -28,20 +28,47 @@
};
/* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ can_clk: can-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
- extal_clk: extal {
+ extal_clk: extal-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
+ cluster0_opp: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -65,6 +92,7 @@
next-level-cache = <&L3_CA55>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+ operating-points-v2 = <&cluster0_opp>;
};
cpu1: cpu@100 {
@@ -74,6 +102,7 @@
next-level-cache = <&L3_CA55>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+ operating-points-v2 = <&cluster0_opp>;
};
L3_CA55: cache-controller-0 {
@@ -83,6 +112,50 @@
};
};
+ gpu_opp_table: opp-table-1 {
+ compatible = "operating-points-v2";
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-250000000 {
+ opp-hz = /bits/ 64 <250000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-125000000 {
+ opp-hz = /bits/ 64 <125000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-62500000 {
+ opp-hz = /bits/ 64 <62500000>;
+ opp-microvolt = <1100000>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <1100000>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -96,16 +169,135 @@
ranges;
ssi0: ssi@10049c00 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
reg = <0 0x10049c00 0 0x400>;
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI0_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI0_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI0_RST_M2_REG>;
+ dmas = <&dmac 0x2655>, <&dmac 0x2656>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
#sound-dai-cells = <0>;
- /* place holder */
+ status = "disabled";
+ };
+
+ ssi1: ssi@1004a000 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a000 0 0x400>;
+ interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI1_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI1_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI1_RST_M2_REG>;
+ dmas = <&dmac 0x2659>, <&dmac 0x265a>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@1004a400 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a400 0 0x400>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI2_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI2_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI2_RST_M2_REG>;
+ dmas = <&dmac 0x265f>;
+ dma-names = "rt";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@1004a800 {
+ compatible = "renesas,r9a07g054-ssi",
+ "renesas,rz-ssi";
+ reg = <0 0x1004a800 0 0x400>;
+ interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+ clocks = <&cpg CPG_MOD R9A07G054_SSI3_PCLK2>,
+ <&cpg CPG_MOD R9A07G054_SSI3_PCLK_SFR>,
+ <&audio_clk1>, <&audio_clk2>;
+ clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+ resets = <&cpg R9A07G054_SSI3_RST_M2_REG>;
+ dmas = <&dmac 0x2661>, <&dmac 0x2662>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@1004ac00 {
+ compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004ac00 0 0x400>;
+ interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G054_RSPI0_CLKB>;
+ resets = <&cpg R9A07G054_RSPI0_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
spi1: spi@1004b000 {
+ compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
reg = <0 0x1004b000 0 0x400>;
+ interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G054_RSPI1_CLKB>;
+ resets = <&cpg R9A07G054_RSPI1_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@1004b400 {
+ compatible = "renesas,r9a07g054-rspi", "renesas,rspi-rz";
+ reg = <0 0x1004b400 0 0x400>;
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD R9A07G054_RSPI2_CLKB>;
+ resets = <&cpg R9A07G054_RSPI2_RST>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
- /* place holder */
+ status = "disabled";
};
scif0: serial@1004b800 {
@@ -234,43 +426,194 @@
};
canfd: can@10050000 {
+ compatible = "renesas,r9a07g054-canfd", "renesas,rzg2l-canfd";
reg = <0 0x10050000 0 0x8000>;
- /* place holder */
+ interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "g_err", "g_recc",
+ "ch0_err", "ch0_rec", "ch0_trx",
+ "ch1_err", "ch1_rec", "ch1_trx";
+ clocks = <&cpg CPG_MOD R9A07G054_CANFD_PCLK>,
+ <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>,
+ <&can_clk>;
+ clock-names = "fck", "canfd", "can_clk";
+ assigned-clocks = <&cpg CPG_CORE R9A07G054_CLK_P0_DIV2>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cpg R9A07G054_CANFD_RSTP_N>,
+ <&cpg R9A07G054_CANFD_RSTC_N>;
+ reset-names = "rstp_n", "rstc_n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ channel0 {
+ status = "disabled";
+ };
+ channel1 {
+ status = "disabled";
+ };
};
i2c0: i2c@10058000 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
reg = <0 0x10058000 0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G054_I2C0_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G054_I2C0_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
i2c1: i2c@10058400 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
reg = <0 0x10058400 0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G054_I2C1_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G054_I2C1_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@10058800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
+ reg = <0 0x10058800 0 0x400>;
+ interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G054_I2C2_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G054_I2C2_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
i2c3: i2c@10058c00 {
#address-cells = <1>;
#size-cells = <0>;
+ compatible = "renesas,riic-r9a07g054", "renesas,riic-rz";
reg = <0 0x10058c00 0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
+ clocks = <&cpg CPG_MOD R9A07G054_I2C3_PCLK>;
+ clock-frequency = <100000>;
+ resets = <&cpg R9A07G054_I2C3_MRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
adc: adc@10059000 {
+ compatible = "renesas,r9a07g054-adc", "renesas,rzg2l-adc";
reg = <0 0x10059000 0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G054_ADC_ADCLK>,
+ <&cpg CPG_MOD R9A07G054_ADC_PCLK>;
+ clock-names = "adclk", "pclk";
+ resets = <&cpg R9A07G054_ADC_PRESETN>,
+ <&cpg R9A07G054_ADC_ADRST_N>;
+ reset-names = "presetn", "adrst-n";
+ power-domains = <&cpg>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ };
+ channel@1 {
+ reg = <1>;
+ };
+ channel@2 {
+ reg = <2>;
+ };
+ channel@3 {
+ reg = <3>;
+ };
+ channel@4 {
+ reg = <4>;
+ };
+ channel@5 {
+ reg = <5>;
+ };
+ channel@6 {
+ reg = <6>;
+ };
+ channel@7 {
+ reg = <7>;
+ };
+ };
+
+ tsu: thermal@10059400 {
+ compatible = "renesas,r9a07g054-tsu",
+ "renesas,rzg2l-tsu";
+ reg = <0 0x10059400 0 0x400>;
+ clocks = <&cpg CPG_MOD R9A07G054_TSU_PCLK>;
+ resets = <&cpg R9A07G054_TSU_PRESETN>;
+ power-domains = <&cpg>;
+ #thermal-sensor-cells = <1>;
};
sbc: spi@10060000 {
+ compatible = "renesas,r9a07g054-rpc-if",
+ "renesas,rzg2l-rpc-if";
reg = <0 0x10060000 0 0x10000>,
<0 0x20000000 0 0x10000000>,
<0 0x10070000 0 0x10000>;
+ reg-names = "regs", "dirmap", "wbuf";
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_SPI_CLK2>,
+ <&cpg CPG_MOD R9A07G054_SPI_CLK>;
+ resets = <&cpg R9A07G054_SPI_RST>;
+ power-domains = <&cpg>;
#address-cells = <1>;
#size-cells = <0>;
- /* place holder */
+ status = "disabled";
};
cpg: clock-controller@11010000 {
@@ -346,8 +689,24 @@
};
gpu: gpu@11840000 {
+ compatible = "renesas,r9a07g054-mali",
+ "arm,mali-bifrost";
reg = <0x0 0x11840000 0x0 0x10000>;
- /* place holder */
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu", "event";
+ clocks = <&cpg CPG_MOD R9A07G054_GPU_CLK>,
+ <&cpg CPG_MOD R9A07G054_GPU_AXI_CLK>,
+ <&cpg CPG_MOD R9A07G054_GPU_ACE_CLK>;
+ clock-names = "gpu", "bus", "bus_ace";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G054_GPU_RESETN>,
+ <&cpg R9A07G054_GPU_AXI_RESETN>,
+ <&cpg R9A07G054_GPU_ACE_RESETN>;
+ reset-names = "rst", "axi_rst", "ace_rst";
+ operating-points-v2 = <&gpu_opp_table>;
};
gic: interrupt-controller@11900000 {
@@ -361,13 +720,35 @@
};
sdhi0: mmc@11c00000 {
+ compatible = "renesas,sdhi-r9a07g054",
+ "renesas,rcar-gen3-sdhi";
reg = <0x0 0x11c00000 0 0x10000>;
- /* place holder */
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK>,
+ <&cpg CPG_MOD R9A07G054_SDHI0_CLK_HS>,
+ <&cpg CPG_MOD R9A07G054_SDHI0_IMCLK2>,
+ <&cpg CPG_MOD R9A07G054_SDHI0_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G054_SDHI0_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
sdhi1: mmc@11c10000 {
+ compatible = "renesas,sdhi-r9a07g054",
+ "renesas,rcar-gen3-sdhi";
reg = <0x0 0x11c10000 0 0x10000>;
- /* place holder */
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK>,
+ <&cpg CPG_MOD R9A07G054_SDHI1_CLK_HS>,
+ <&cpg CPG_MOD R9A07G054_SDHI1_IMCLK2>,
+ <&cpg CPG_MOD R9A07G054_SDHI1_ACLK>;
+ clock-names = "core", "clkh", "cd", "aclk";
+ resets = <&cpg R9A07G054_SDHI1_IXRST>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
eth0: ethernet@11c20000 {
@@ -411,73 +792,226 @@
};
phyrst: usbphy-ctrl@11c40000 {
+ compatible = "renesas,r9a07g054-usbphy-ctrl",
+ "renesas,rzg2l-usbphy-ctrl";
reg = <0 0x11c40000 0 0x10000>;
- /* place holder */
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>;
+ resets = <&cpg R9A07G054_USB_PRESETN>;
+ power-domains = <&cpg>;
+ #reset-cells = <1>;
+ status = "disabled";
};
ohci0: usb@11c50000 {
+ compatible = "generic-ohci";
reg = <0 0x11c50000 0 0x100>;
- /* place holder */
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G054_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
};
ohci1: usb@11c70000 {
+ compatible = "generic-ohci";
reg = <0 0x11c70000 0 0x100>;
- /* place holder */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G054_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
};
ehci0: usb@11c50100 {
+ compatible = "generic-ehci";
reg = <0 0x11c50100 0 0x100>;
- /* place holder */
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G054_USB_U2H0_HRESETN>;
+ phys = <&usb2_phy0 2>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
ehci1: usb@11c70100 {
+ compatible = "generic-ehci";
reg = <0 0x11c70100 0 0x100>;
- /* place holder */
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>,
+ <&cpg R9A07G054_USB_U2H1_HRESETN>;
+ phys = <&usb2_phy1 2>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
usb2_phy0: usb-phy@11c50200 {
+ compatible = "renesas,usb2-phy-r9a07g054",
+ "renesas,rzg2l-usb2-phy";
reg = <0 0x11c50200 0 0x700>;
- /* place holder */
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H0_HCLK>;
+ resets = <&phyrst 0>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
usb2_phy1: usb-phy@11c70200 {
+ compatible = "renesas,usb2-phy-r9a07g054",
+ "renesas,rzg2l-usb2-phy";
reg = <0 0x11c70200 0 0x700>;
- /* place holder */
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2H1_HCLK>;
+ resets = <&phyrst 1>;
+ #phy-cells = <1>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
hsusb: usb@11c60000 {
+ compatible = "renesas,usbhs-r9a07g054",
+ "renesas,rza2-usbhs";
reg = <0 0x11c60000 0 0x10000>;
- /* place holder */
+ interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G054_USB_PCLK>,
+ <&cpg CPG_MOD R9A07G054_USB_U2P_EXR_CPUCLK>;
+ resets = <&phyrst 0>,
+ <&cpg R9A07G054_USB_U2P_EXL_SYSRST>;
+ renesas,buswait = <7>;
+ phys = <&usb2_phy0 3>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
};
wdt0: watchdog@12800800 {
+ compatible = "renesas,r9a07g054-wdt",
+ "renesas,rzg2l-wdt";
reg = <0 0x12800800 0 0x400>;
- /* place holder */
+ clocks = <&cpg CPG_MOD R9A07G054_WDT0_PCLK>,
+ <&cpg CPG_MOD R9A07G054_WDT0_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G054_WDT0_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
wdt1: watchdog@12800c00 {
+ compatible = "renesas,r9a07g054-wdt",
+ "renesas,rzg2l-wdt";
reg = <0 0x12800C00 0 0x400>;
- /* place holder */
+ clocks = <&cpg CPG_MOD R9A07G054_WDT1_PCLK>,
+ <&cpg CPG_MOD R9A07G054_WDT1_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G054_WDT1_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
wdt2: watchdog@12800400 {
+ compatible = "renesas,r9a07g054-wdt",
+ "renesas,rzg2l-wdt";
reg = <0 0x12800400 0 0x400>;
- /* place holder */
+ clocks = <&cpg CPG_MOD R9A07G054_WDT2_PCLK>,
+ <&cpg CPG_MOD R9A07G054_WDT2_CLK>;
+ clock-names = "pclk", "oscclk";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wdt", "perrout";
+ resets = <&cpg R9A07G054_WDT2_PRESETN>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
ostm0: timer@12801000 {
+ compatible = "renesas,r9a07g054-ostm",
+ "renesas,ostm";
reg = <0x0 0x12801000 0x0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G054_OSTM0_PCLK>;
+ resets = <&cpg R9A07G054_OSTM0_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
ostm1: timer@12801400 {
+ compatible = "renesas,r9a07g054-ostm",
+ "renesas,ostm";
reg = <0x0 0x12801400 0x0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G054_OSTM1_PCLK>;
+ resets = <&cpg R9A07G054_OSTM1_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
};
ostm2: timer@12801800 {
+ compatible = "renesas,r9a07g054-ostm",
+ "renesas,ostm";
reg = <0x0 0x12801800 0x0 0x400>;
- /* place holder */
+ interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&cpg CPG_MOD R9A07G054_OSTM2_PCLK>;
+ resets = <&cpg R9A07G054_OSTM2_PRESETZ>;
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsu 0>;
+ sustainable-power = <717>;
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 0 2>;
+ contribution = <1024>;
+ };
+ };
+
+ trips {
+ sensor_crit: sensor-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+
+ target: trip-point {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index fc334b4c2aa4..4e07e1a0fb66 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -16,11 +16,3 @@
model = "Renesas SMARC EVK based on r9a07g054l2";
compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
};
-
-&pinctrl {
- /delete-node/ can0-stb-hog;
- /delete-node/ can1-stb-hog;
- /delete-node/ gpio-sd0-pwr-en-hog;
- /delete-node/ sd0-dev-sel-hog;
- /delete-node/ sd1-pwr-en-hog;
-};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
new file mode 100644
index 000000000000..c207d8ce5523
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M (r9a09g011) Evaluation Kit Board
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g011.dtsi"
+
+/ {
+ model = "RZ/V2M Evaluation Kit 2.0";
+ compatible = "renesas,rzv2mevk2", "renesas,r9a09g011";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@58000000 {
+ device_type = "memory";
+ /*
+ * first 1.25GiB is reserved for ISP Firmware,
+ * next 128MiB is reserved for secure area.
+ */
+ reg = <0x0 0x58000000 0x0 0x28000000>;
+ };
+
+ memory@180000000 {
+ device_type = "memory";
+ reg = <0x1 0x80000000 0x0 0x80000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
new file mode 100644
index 000000000000..27810f4ad4cb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2M SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a09g011-cpg.h>
+
+/ {
+ compatible = "renesas,r9a09g011";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ /* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53";
+ reg = <0>;
+ device_type = "cpu";
+ clocks = <&cpg CPG_MOD R9A09G011_CA53_CLK>;
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@82000000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x82010000 0 0x1000>,
+ <0x0 0x82020000 0 0x20000>,
+ <0x0 0x82040000 0 0x20000>,
+ <0x0 0x82060000 0 0x20000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD R9A09G011_GIC_CLK>;
+ clock-names = "clk";
+ };
+
+ cpg: clock-controller@a3500000 {
+ compatible = "renesas,r9a09g011-cpg";
+ reg = <0 0xa3500000 0 0x1000>;
+ clocks = <&extal_clk>;
+ clock-names = "extal";
+ #clock-cells = <2>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ uart0: serial@a4040000 {
+ compatible = "renesas,r9a09g011-uart", "renesas,em-uart";
+ reg = <0 0xa4040000 0 0x80>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A09G011_URT0_CLK>,
+ <&cpg CPG_MOD R9A09G011_URT_PCLK>;
+ clock-names = "sclk", "pclk";
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
index 588117aafaca..3962d47b3e59 100644
--- a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -26,7 +26,6 @@
serial0 = &scif0;
i2c0 = &i2c0;
i2c1 = &i2c1;
- i2c3 = &i2c3;
};
chosen {
@@ -53,7 +52,6 @@
"Mic Bias", "Microphone Jack";
cpu_dai: simple-audio-card,cpu {
- sound-dai = <&ssi0>;
};
codec_dai: simple-audio-card,codec {
@@ -75,7 +73,6 @@
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
@@ -131,20 +128,6 @@
status = "okay";
};
-&i2c3 {
- pinctrl-0 = <&i2c3_pins>;
- pinctrl-names = "default";
- clock-frequency = <400000>;
-
- status = "okay";
-
- wm8978: codec@1a {
- compatible = "wlf,wm8978";
- #sound-dai-cells = <0>;
- reg = <0x1a>;
- };
-};
-
&ohci0 {
dr_mode = "otg";
status = "okay";
@@ -184,13 +167,6 @@
status = "okay";
};
-&ssi0 {
- pinctrl-0 = <&ssi0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 33ddfd18bd56..e180a955b6ac 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -14,6 +14,25 @@
/ {
aliases {
serial1 = &scif2;
+ i2c3 = &i2c3;
+ };
+};
+
+&cpu_dai {
+ sound-dai = <&ssi0>;
+};
+
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ wm8978: codec@1a {
+ compatible = "wlf,wm8978";
+ #sound-dai-cells = <0>;
+ reg = <0x1a>;
};
};
@@ -33,3 +52,14 @@
status = "okay";
};
#endif
+
+&ssi0 {
+ pinctrl-0 = <&ssi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&vccq_sdhi1 {
+ gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index 37ff2091582e..a78a8def363e 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -12,11 +12,6 @@
pinctrl-0 = <&sound_clk_pins>;
pinctrl-names = "default";
- scif0_pins: scif0 {
- pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
- <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
- };
-
#if SW_SCIF_CAN
/* SW8 should be at position 2->1 */
can1_pins: can1 {
@@ -25,13 +20,6 @@
};
#endif
- scif1_pins: scif1 {
- pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
- <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
- <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
- <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
- };
-
#if SW_RSPI_CAN
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
can1-stb-hog {
@@ -47,6 +35,33 @@
};
#endif
+ i2c0_pins: i2c0 {
+ pins = "RIIC0_SDA", "RIIC0_SCL";
+ input-enable;
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "RIIC1_SDA", "RIIC1_SCL";
+ input-enable;
+ };
+
+ i2c2_pins: i2c2 {
+ pinmux = <RZG2L_PORT_PINMUX(42, 3, 1)>, /* SDA */
+ <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */
+ };
+
+ scif0_pins: scif0 {
+ pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
+ <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
+ };
+
+ scif1_pins: scif1 {
+ pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+ <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+ <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+ <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+ };
+
sd1-pwr-en-hog {
gpio-hog;
gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
@@ -90,5 +105,30 @@
pins = "AUDIO_CLK1", "AUDIO_CLK2";
input-enable;
};
+
+ spi1_pins: spi1 {
+ pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+ <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+ <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+ <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+ };
+
+ ssi0_pins: ssi0 {
+ pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+ <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+ <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+ <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+ };
+
+ usb0_pins: usb0 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+ <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+ };
+
+ usb1_pins: usb1 {
+ pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+ };
};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 88a7938017aa..959a0ad1d367 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -41,6 +41,15 @@
regulator-always-on;
};
+ reg_1p1v: regulator-vdd-core {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
@@ -84,6 +93,18 @@
clock-frequency = <24000000>;
};
+&gpu {
+ mali-supply = <&reg_1p1v>;
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
&pinctrl {
eth0_pins: eth0 {
pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
@@ -110,6 +131,18 @@
line-name = "gpio_sd0_pwr_en";
};
+ qspi0_pins: qspi0 {
+ qspi0-data {
+ pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+ power-source = <1800>;
+ };
+
+ qspi0-ctrl {
+ pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+ power-source = <1800>;
+ };
+ };
+
/*
* SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
* The below switch logic can be used to select the device between
@@ -175,6 +208,34 @@
};
};
+&sbc {
+ pinctrl-0 = <&qspi0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ flash@0 {
+ compatible = "micron,mt25qu512a", "jedec,spi-nor";
+ reg = <0>;
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+ spi-rx-bus-width = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ reg = <0x00000000 0x2000000>;
+ read-only;
+ };
+ user@2000000 {
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+ };
+};
+
#if (!SW_SD0_DEV_SEL)
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index df7631fe5fac..aa170492dd2b 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -43,6 +43,7 @@
/ {
aliases {
serial1 = &scif1;
+ i2c2 = &i2c2;
};
};
@@ -59,6 +60,24 @@
};
#endif
+&cpu_dai {
+ sound-dai = <&ssi0>;
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ wm8978: codec@1a {
+ compatible = "wlf,wm8978";
+ #sound-dai-cells = <0>;
+ reg = <0x1a>;
+ };
+};
+
/*
* To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
* SW1 should be at position 2->3 so that SER0_CTS# line is activated
@@ -75,3 +94,22 @@
status = "okay";
};
#endif
+
+&ssi0 {
+ pinctrl-0 = <&ssi0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+#if (SW_RSPI_CAN)
+&spi1 {
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+ gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
new file mode 100644
index 000000000000..bd8bc858c28c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-pinfunction.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC pincontrol parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+ pinctrl-0 = <&sound_clk_pins>;
+ pinctrl-names = "default";
+
+ can0_pins: can0 {
+ pinmux = <RZG2L_PORT_PINMUX(1, 1, 3)>, /* TX */
+ <RZG2L_PORT_PINMUX(1, 2, 3)>; /* RX */
+ };
+
+#if (SW_ET0_EN_N)
+ can0-stb-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(2, 2) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can0_stb";
+ };
+#endif
+
+ can1_pins: can1 {
+ pinmux = <RZG2L_PORT_PINMUX(2, 0, 3)>, /* TX */
+ <RZG2L_PORT_PINMUX(2, 1, 3)>; /* RX */
+ };
+
+#if (SW_ET0_EN_N)
+ can1-stb-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can1_stb";
+ };
+#endif
+
+ i2c0_pins: i2c0 {
+ pins = "RIIC0_SDA", "RIIC0_SCL";
+ input-enable;
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "RIIC1_SDA", "RIIC1_SCL";
+ input-enable;
+ };
+
+ scif0_pins: scif0 {
+ pinmux = <RZG2L_PORT_PINMUX(6, 4, 6)>, /* TxD */
+ <RZG2L_PORT_PINMUX(6, 3, 6)>; /* RxD */
+ };
+
+ sd1-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(0, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "sd1_pwr_en";
+ };
+
+ sdhi1_pins: sd1 {
+ sd1_data {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <3300>;
+ };
+
+ sd1_ctrl {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <3300>;
+ };
+
+ sd1_mux {
+ pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+ };
+ };
+
+ sdhi1_pins_uhs: sd1_uhs {
+ sd1_data_uhs {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <1800>;
+ };
+
+ sd1_ctrl_uhs {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <1800>;
+ };
+
+ sd1_mux_uhs {
+ pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */
+ };
+ };
+
+ sound_clk_pins: sound_clk {
+ pins = "AUDIO_CLK1", "AUDIO_CLK2";
+ input-enable;
+ };
+
+ ssi1_pins: ssi1 {
+ pinmux = <RZG2L_PORT_PINMUX(3, 0, 2)>, /* BCK */
+ <RZG2L_PORT_PINMUX(3, 1, 2)>, /* RCK */
+ <RZG2L_PORT_PINMUX(3, 2, 2)>, /* TXD */
+ <RZG2L_PORT_PINMUX(3, 3, 2)>; /* RXD */
+ };
+
+ usb0_pins: usb0 {
+ pinmux = <RZG2L_PORT_PINMUX(5, 0, 1)>, /* VBUS */
+ <RZG2L_PORT_PINMUX(5, 2, 1)>, /* OVC */
+ <RZG2L_PORT_PINMUX(5, 3, 1)>; /* OTG_ID */
+ };
+
+ usb1_pins: usb1 {
+ pinmux = <RZG2L_PORT_PINMUX(5, 4, 5)>, /* OVC */
+ <RZG2L_PORT_PINMUX(6, 0, 1)>; /* VBUS */
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
new file mode 100644
index 000000000000..a663115f5aae
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc-som.dtsi
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SMARC SOM common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+ aliases {
+ ethernet0 = &eth0;
+ ethernet1 = &eth1;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ };
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x38000000>;
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+#if !(SW_SW0_DEV_SEL)
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <3300000 1>, <1800000 0>;
+ regulator-boot-on;
+ gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ };
+#endif
+};
+
+#if (!SW_ET0_EN_N)
+&eth0 {
+ pinctrl-0 = <&eth0_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy0: ethernet-phy@7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ rxc-skew-psec = <2400>;
+ txc-skew-psec = <2400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+#endif
+
+&eth1 {
+ pinctrl-0 = <&eth1_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+ phy1: ethernet-phy@7 {
+ compatible = "ethernet-phy-id0022.1640",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ rxc-skew-psec = <2400>;
+ txc-skew-psec = <2400>;
+ rxdv-skew-psec = <0>;
+ txdv-skew-psec = <0>;
+ rxd0-skew-psec = <0>;
+ rxd1-skew-psec = <0>;
+ rxd2-skew-psec = <0>;
+ rxd3-skew-psec = <0>;
+ txd0-skew-psec = <0>;
+ txd1-skew-psec = <0>;
+ txd2-skew-psec = <0>;
+ txd3-skew-psec = <0>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <24000000>;
+};
+
+&ostm1 {
+ status = "okay";
+};
+
+&ostm2 {
+ status = "okay";
+};
+
+&pinctrl {
+ eth0_pins: eth0 {
+ pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */
+ <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */
+ <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */
+ <RZG2L_PORT_PINMUX(1, 0, 1)>, /* ET0_TXC */
+ <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */
+ <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */
+ <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */
+ <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */
+ <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */
+ <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */
+ <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */
+ <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */
+ <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */
+ <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */
+ <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */
+ };
+
+ eth1_pins: eth1 {
+ pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */
+ <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */
+ <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */
+ <RZG2L_PORT_PINMUX(7, 0, 1)>, /* ET1_TXC */
+ <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */
+ <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */
+ <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */
+ <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */
+ <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */
+ <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */
+ <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */
+ <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */
+ <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */
+ <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */
+ <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */
+ };
+
+ sdhi0_emmc_pins: sd0emmc {
+ sd0_emmc_data {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+ "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+ power-source = <1800>;
+ };
+
+ sd0_emmc_ctrl {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <1800>;
+ };
+
+ sd0_emmc_rst {
+ pins = "SD0_RST#";
+ power-source = <1800>;
+ };
+ };
+
+ sdhi0_pins: sd0 {
+ sd0_data {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+ power-source = <3300>;
+ };
+
+ sd0_ctrl {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <3300>;
+ };
+
+ sd0_mux {
+ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+ };
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ sd0_data_uhs {
+ pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+ power-source = <1800>;
+ };
+
+ sd0_ctrl_uhs {
+ pins = "SD0_CLK", "SD0_CMD";
+ power-source = <1800>;
+ };
+
+ sd0_mux_uhs {
+ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */
+ };
+ };
+};
+
+#if (SW_SW0_DEV_SEL)
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_emmc_pins>;
+ pinctrl-1 = <&sdhi0_emmc_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+ status = "okay";
+};
+#else
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+#endif
+
+&wdt0 {
+ status = "okay";
+ timeout-sec = <60>;
+};
+
+&wdt2 {
+ status = "okay";
+ timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
new file mode 100644
index 000000000000..0051634d7b1c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2ul-smarc.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+/*
+ * DIP-Switch SW1 setting
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC)
+ * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1)
+ * Please change below macros according to SW1 setting
+ */
+#define SW_SW0_DEV_SEL 1
+#define SW_ET0_EN_N 1
+
+#include "rzg2ul-smarc-som.dtsi"
+#include "rzg2ul-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+#if (!SW_ET0_EN_N)
+&canfd {
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ status = "disabled";
+};
+#endif
+
+&cpu_dai {
+ sound-dai = <&ssi1>;
+};
+
+&i2c1 {
+ wm8978: codec@1a {
+ compatible = "wlf,wm8978";
+ #sound-dai-cells = <0>;
+ reg = <0x1a>;
+ };
+};
+
+#if (SW_ET0_EN_N)
+&ssi1 {
+ pinctrl-0 = <&ssi1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+#else
+&snd_rzg2l {
+ status = "disabled";
+};
+
+&ssi1 {
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+ status = "disabled";
+};
+#endif
+
+&vccq_sdhi1 {
+ gpios = <&pinctrl RZG2L_GPIO(6, 1) GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 6092dc4531ad..31837fcd7bf0 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -386,7 +386,7 @@
ports {
port@0 {
- endpoint {
+ du_out_rgb: endpoint {
remote-endpoint = <&adv7123_in>;
};
};
@@ -866,6 +866,55 @@
};
};
+&rpc {
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index ae532cd21708..5bcb84403ef6 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -97,8 +97,14 @@
status = "okay";
};
-&du_out_rgb {
- remote-endpoint = <&adv7513_in>;
+&du {
+ ports {
+ port@0 {
+ du_out_rgb: endpoint {
+ remote-endpoint = <&adv7513_in>;
+ };
+ };
+ };
};
&ehci0 {
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index b4bdb2d7e4ba..90a4c0629d24 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -426,6 +426,55 @@
};
};
+&rpc {
+ /* Left disabled. To be enabled by firmware when unlocked. */
+
+ flash@0 {
+ compatible = "cypress,hyperflash", "cfi-flash";
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ bootparam@0 {
+ reg = <0x00000000 0x040000>;
+ read-only;
+ };
+ bl2@40000 {
+ reg = <0x00040000 0x140000>;
+ read-only;
+ };
+ cert_header_sa6@180000 {
+ reg = <0x00180000 0x040000>;
+ read-only;
+ };
+ bl31@1c0000 {
+ reg = <0x001c0000 0x040000>;
+ read-only;
+ };
+ tee@200000 {
+ reg = <0x00200000 0x440000>;
+ read-only;
+ };
+ uboot@640000 {
+ reg = <0x00640000 0x100000>;
+ read-only;
+ };
+ dtb@740000 {
+ reg = <0x00740000 0x080000>;
+ };
+ kernel@7c0000 {
+ reg = <0x007c0000 0x1400000>;
+ };
+ user@1bc0000 {
+ reg = <0x01bc0000 0x2440000>;
+ };
+ };
+ };
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4ae9f35434b8..18d00eae3072 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -59,5 +59,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index b822533dc7f1..49ae15708a0b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -306,6 +306,10 @@
};
power-domain@RK3328_PD_VIDEO {
reg = <RK3328_PD_VIDEO>;
+ clocks = <&cru ACLK_RKVDEC>,
+ <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
#power-domain-cells = <0>;
};
power-domain@RK3328_PD_VPU {
@@ -660,14 +664,28 @@
power-domains = <&power RK3328_PD_VPU>;
};
- rkvdec_mmu: iommu@ff360480 {
+ vdec: video-codec@ff360000 {
+ compatible = "rockchip,rk3328-vdec", "rockchip,rk3399-vdec";
+ reg = <0x0 0xff360000 0x0 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+ <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+ clock-names = "axi", "ahb", "cabac", "core";
+ assigned-clocks = <&cru ACLK_RKVDEC>, <&cru SCLK_VDEC_CABAC>,
+ <&cru SCLK_VDEC_CORE>;
+ assigned-clock-rates = <400000000>, <400000000>, <300000000>;
+ iommus = <&vdec_mmu>;
+ power-domains = <&power RK3328_PD_VIDEO>;
+ };
+
+ vdec_mmu: iommu@ff360480 {
compatible = "rockchip,iommu";
reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
- status = "disabled";
+ power-domains = <&power RK3328_PD_VIDEO>;
};
vop: vop@ff370000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c654b6b02f3f..b340c9e246c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include "rk3399.dtsi"
@@ -786,7 +787,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
brcm,drive-strength = <5>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 3355fb90fa54..50d459ee4831 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -234,6 +234,13 @@
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
};
+&dmc {
+ center-supply = <&ppvar_centerlogic>;
+ rockchip,pd-idle-dis-freq-hz = <800000000>;
+ rockchip,sr-idle-dis-freq-hz = <800000000>;
+ rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
+};
+
&edp {
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index a9817b3d7edc..913d845eb51a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -391,6 +391,18 @@ camera: &i2c7 {
<400000000>;
};
+/* The center supply is fixed to .9V on scarlet */
+&dmc {
+ center-supply = <&pp900_s0>;
+};
+
+/* We don't need .925 V for 928 MHz on scarlet */
+&dmc_opp_table {
+ opp03 {
+ opp-microvolt = <900000>;
+ };
+};
+
&gpio0 {
gpio-line-names = /* GPIO0 A 0-7 */
"CLK_32K_AP",
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 162f08bca0d4..23bfba86daab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -373,6 +373,34 @@
<200000000>;
};
+&dfi {
+ status = "okay";
+};
+
+&dmc {
+ status = "okay";
+
+ rockchip,pd-idle-ns = <160>;
+ rockchip,sr-idle-ns = <10240>;
+ rockchip,sr-mc-gate-idle-ns = <40960>;
+ rockchip,srpd-lite-idle-ns = <61440>;
+ rockchip,standby-idle-ns = <81920>;
+
+ rockchip,ddr3_odt_dis_freq = <666000000>;
+ rockchip,lpddr3_odt_dis_freq = <666000000>;
+ rockchip,lpddr4_odt_dis_freq = <666000000>;
+
+ rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+ rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+ rockchip,standby-idle-dis-freq-hz = <928000000>;
+};
+
+&dmc_opp_table {
+ opp03 {
+ opp-suspend;
+ };
+};
+
&emmc_phy {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index bee45c17e2ca..7af27e8216f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -2,6 +2,7 @@
/dts-v1/;
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -629,7 +630,7 @@
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index 7ba3ed24084b..46c4581deb8d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -6,6 +6,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -682,7 +683,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
brcm,drive-strength = <5>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 5bbe74bed0ea..a21ac319f809 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -5,6 +5,7 @@
/dts-v1/;
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -509,7 +510,7 @@
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 8c0ff6c96e03..248ad41a976b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -267,7 +267,7 @@
interrupt-parent = <&gpio1>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
+ pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
rockchip,system-power-controller;
wakeup-source;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
index 2180e0f75003..6e29e74f6fc6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
@@ -110,6 +110,27 @@
opp-microvolt = <1075000>;
};
};
+
+ dmc_opp_table: dmc_opp_table {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <900000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <666000000>;
+ opp-microvolt = <900000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <928000000>;
+ opp-microvolt = <925000>;
+ };
+ };
};
&cpu_l0 {
@@ -136,6 +157,10 @@
operating-points-v2 = <&cluster1_opp>;
};
+&dmc {
+ operating-points-v2 = <&dmc_opp_table>;
+};
+
&gpu {
operating-points-v2 = <&gpu_opp_table>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 9d3a718f66f6..ed856bfcfc33 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -7,6 +7,7 @@
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/input/input.h"
+#include <dt-bindings/interrupt-controller/irq.h>
#include "dt-bindings/usb/pd.h"
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
@@ -735,7 +736,7 @@
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
index cf48746a3ad8..0806545922f5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b.dts
@@ -23,7 +23,7 @@
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
index 793d84833921..4053ba72618c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts
@@ -31,7 +31,7 @@
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index 25dc61c26a94..94e39ed63397 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -7,6 +7,7 @@
#include "rk3399.dtsi"
#include "rk3399-opp.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
aliases {
@@ -528,7 +529,7 @@
compatible = "brcm,bcm4329-fmac";
reg = <1>;
interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_l>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 080457a68e3c..fbd0346624e6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -178,6 +178,15 @@
ports = <&vopl_out>, <&vopb_out>;
};
+ dmc: memory-controller {
+ compatible = "rockchip,rk3399-dmc";
+ rockchip,pmu = <&pmugrf>;
+ devfreq-events = <&dfi>;
+ clocks = <&cru SCLK_DDRC>;
+ clock-names = "dmc_clk";
+ status = "disabled";
+ };
+
pmu_a53 {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
@@ -1295,6 +1304,16 @@
status = "disabled";
};
+ dfi: dfi@ff630000 {
+ reg = <0x00 0xff630000 0x00 0x4000>;
+ compatible = "rockchip,rk3399-dfi";
+ rockchip,pmu = <&pmugrf>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru PCLK_DDR_MON>;
+ clock-names = "pclk_ddr_mon";
+ status = "disabled";
+ };
+
vpu: video-codec@ff650000 {
compatible = "rockchip,rk3399-vpu";
reg = <0x0 0xff650000 0x0 0x800>;
@@ -1413,9 +1432,11 @@
clock-names = "apb_pclk";
};
- pmucru: pmu-clock-controller@ff750000 {
+ pmucru: clock-controller@ff750000 {
compatible = "rockchip,rk3399-pmucru";
reg = <0x0 0xff750000 0x0 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
rockchip,grf = <&pmugrf>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -1426,6 +1447,8 @@
cru: clock-controller@ff760000 {
compatible = "rockchip,rk3399-cru";
reg = <0x0 0xff760000 0x0 0x1000>;
+ clocks = <&xin24m>;
+ clock-names = "xin24m";
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -1534,6 +1557,7 @@
reg = <0xf780 0x24>;
clocks = <&sdhci>;
clock-names = "emmcclk";
+ drive-impedance-ohm = <50>;
#phy-cells = <0>;
status = "disabled";
};
@@ -1544,7 +1568,6 @@
clock-names = "refclk";
#phy-cells = <1>;
resets = <&cru SRST_PCIEPHY>;
- drive-impedance-ohm = <50>;
reset-names = "phy";
status = "disabled";
};
@@ -1884,7 +1907,7 @@
<&cru SCLK_HDMI_CEC>,
<&cru PCLK_VIO_GRF>,
<&cru PLL_VPLL>;
- clock-names = "iahb", "isfr", "cec", "grf", "vpll";
+ clock-names = "iahb", "isfr", "cec", "grf", "ref";
power-domains = <&power RK3399_PD_HDCP>;
reg-io-width = <4>;
rockchip,grf = <&grf>;
@@ -2188,6 +2211,22 @@
output-low;
};
+ pcfg_input_enable: pcfg-input-enable {
+ input-enable;
+ };
+
+ pcfg_input_pull_up: pcfg-input-pull-up {
+ input-enable;
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_input_pull_down: pcfg-input-pull-down {
+ input-enable;
+ bias-pull-down;
+ drive-strength = <2>;
+ };
+
clock {
clk_32k: clk-32k {
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index fea748adfa90..e01668e6e5f9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -466,6 +466,55 @@
default-brightness = <0>;
};
};
+
+ wusb3801: tcpc@60 {
+ compatible = "willsemi,wusb3801";
+ reg = <0x60>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&tcpc_int_l>;
+ pinctrl-names = "default";
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ vbus-supply = <&otg_switch>;
+ power-role = "dual";
+ try-power-role = "sink";
+ data-role = "dual";
+ typec-power-opmode = "default";
+ pd-disable;
+
+ ports {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+
+ port@0 {
+ reg = <0x0>;
+
+ typec_hs_usb2phy0: endpoint {
+ remote-endpoint = <&usb2phy0_typec_hs>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ accelerometer@18 {
+ compatible = "silan,sc7a20";
+ reg = <0x18>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-0 = <&accelerometer_int_l>;
+ pinctrl-names = "default";
+ st,drdy-int-pin = <1>;
+ vdd-supply = <&vcc_3v3>;
+ vddio-supply = <&vcc_3v3>;
+ };
};
&i2s1_8ch {
@@ -482,6 +531,12 @@
};
&pinctrl {
+ accelerometer {
+ accelerometer_int_l: accelerometer-int-l {
+ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
audio-amplifier {
spk_amp_enable_h: spk-amp-enable-h {
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -550,6 +605,12 @@
};
};
+ tcpc {
+ tcpc_int_l: tcpc-int-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
vcc-wl {
vcc_wl_pin: vcc-wl-pin {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -637,3 +698,22 @@
&uart2 {
status = "okay";
};
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ status = "okay";
+
+ port {
+ usb2phy0_typec_hs: endpoint {
+ remote-endpoint = <&typec_hs_usb2phy0>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index dd7f4b9b686b..141a433429b5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -151,6 +151,16 @@
vin-supply = <&vcc5v0_usb>;
};
+ vcc5v0_usb20_otg: vcc5v0_usb20_otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vcc5v0_usb20_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dcdc_boost>;
+ };
+
vcc3v3_sd: vcc3v3_sd {
compatible = "regulator-fixed";
enable-active-low;
@@ -187,6 +197,10 @@
};
};
+&combphy1 {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
@@ -672,6 +686,29 @@
status = "okay";
};
+&usb_host0_xhci {
+ status = "okay";
+};
+
+/* usb3 controller is muxed with sata1 */
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb20_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb20_otg>;
+ status = "okay";
+};
+
&usb2phy1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
new file mode 100644
index 000000000000..7bdcecc0dfe4
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Pine64 RK3566 Quartz64-B Board";
+ compatible = "pine64,quartz64-b", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac1_clkin: external-gmac1-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac1_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-user {
+ label = "user-led";
+ default-state = "on";
+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led_enable_h>;
+ retain-state-suspended;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ status = "okay";
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <5000000>;
+ };
+
+ vcc5v0_in: vcc5v0-in-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_in>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb30_host";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb_otg";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+ clock_in_out = "input";
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_clkinout
+ &gmac1m1_rgmii_bus>;
+ snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+ snps,reset-delays-us = <0 20000 100000>;
+ tx_delay = <0x4f>;
+ rx_delay = <0x24>;
+ phy-handle = <&rgmii_phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc_3v3";
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ };
+ };
+ };
+};
+
+/* i2c2_m1 exposed on csi port, pulled up to vcc_3v3 */
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m1_xfer>;
+ status = "okay";
+};
+
+/* i2c3_m1 exposed on dsi port, pulled up to vcc_3v3 */
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m1_xfer>;
+ status = "okay";
+};
+
+/*
+ * i2c4_m0 is exposed on PI40, pulled up to vcc_3v3
+ * pin 27 - i2c4_sda_m0
+ * pin 28 - i2c4_scl_m0
+ */
+&i2c4 {
+ status = "okay";
+};
+
+/*
+ * i2c5_m0 is exposed on PI40
+ * pin 29 - i2c5_scl_m0
+ * pin 31 - i2c5_sda_m0
+ */
+&i2c5 {
+ status = "disabled";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ };
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ user_led_enable_h: user-led-enable-h {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcca1v8_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcca1v8_pmu>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcca1v8_pmu>;
+ status = "okay";
+};
+
+&sfc {
+ pinctrl-0 = <&fspi_pins>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
+ };
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+ status = "okay";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca1v8_pmu>;
+ };
+};
+
+/*
+ * uart2_m0 is exposed on PI40
+ * pin 8 - uart2_tx_m0
+ * pin 10 - uart2_rx_m0
+ */
+&uart2 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
new file mode 100644
index 000000000000..57759b66d44d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts
@@ -0,0 +1,579 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Firefly Station M2";
+ compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac1_clkin: external-gmac1-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac1_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-user {
+ label = "user-led";
+ default-state = "on";
+ gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led_enable_h>;
+ retain-state-suspended;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ status = "okay";
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ };
+
+ usb_5v: usb-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&usb_5v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb30_host";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb30_host_en_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb_otg";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en_h>;
+ regulator-always-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+ clock_in_out = "input";
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m0_miim
+ &gmac1m0_tx_bus2
+ &gmac1m0_rx_bus2
+ &gmac1m0_rgmii_clk
+ &gmac1m0_clkinout
+ &gmac1m0_rgmii_bus>;
+ snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ /* Reset time is 20ms, 100ms for rtl8211f */
+ snps,reset-delays-us = <0 20000 100000>;
+ tx_delay = <0x4f>;
+ rx_delay = <0x24>;
+ phy-handle = <&rgmii_phy1>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-boot-on;
+ regulator-name = "vcc3v3";
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m1_xfer>;
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ };
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ user_led_enable_h: user-led-enable-h {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_usb30_host_en_h: vcc5v0-usb30-host-en_h {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en_h: vcc5v0-usb-otg-en_h {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_3v3>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcca1v8_pmu>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
+ status = "okay";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca1v8_pmu>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb30_host>;
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
new file mode 100644
index 000000000000..e00568a6be5c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-soquartz.dtsi"
+
+/ {
+ model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board";
+ compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566";
+
+ /* labeled +12v in schematic */
+ vcc12v_dcin: vcc12v-dcin-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ /* labeled +5v in schematic */
+ vcc_5v: vcc-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+};
+
+&gmac1 {
+ status = "okay";
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+ status = "okay";
+
+ /*
+ * the rtc interrupt is tied to PMIC_PWRON,
+ * it will force reset the board if triggered.
+ */
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063";
+ reg = <0x51>;
+ };
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A - to PI40
+ * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+ status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A - to PI40
+ * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+ status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B - to PI40
+ * pin 45 - GPIO24 - i2c4_scl_m1
+ * pin 47 - GPIO23 - i2c4_sda_m1
+ */
+&i2c4 {
+ status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A - to PI40
+ * pin 24 - GPIO26 - i2s1_sdi1_m1
+ * pin 25 - GPIO21 - i2s1_sdo0_m1
+ * pin 26 - GPIO19 - i2s1_lrck_tx_m1
+ * pin 27 - GPIO20 - i2s1_sdi0_m1
+ * pin 29 - GPIO16 - i2s1_sdi3_m1
+ * pin 30 - GPIO6 - i2s1_sdi2_m1
+ * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - GPIO25 - i2s1_sdo2_m1
+ * pin 49 - GPIO18 - i2s1_sclk_tx_m1
+ * pin 50 - GPIO17 - i2s1_mclk_m1
+ * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+ status = "disabled";
+};
+
+&led_diy {
+ status = "okay";
+};
+
+&led_work {
+ status = "okay";
+};
+
+&rgmii_phy1 {
+ status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A - to J2
+ * pin 94 - AIN1 - saradc_vin3
+ * pin 96 - AIN0 - saradc_vin2
+ */
+&saradc {
+ status = "disabled";
+};
+
+&sdmmc0 {
+ vmmc-supply = <&sdmmc_pwr>;
+ status = "okay";
+};
+
+&sdmmc_pwr {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A - to PI40
+ * pin 37 - GPIO7 - spi3_cs1_m0
+ * pin 38 - GPIO11 - spi3_clk_m0
+ * pin 39 - GPIO8 - spi3_cs0_m0
+ * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - GPIO10 - spi3_mosi_m0
+ */
+&spi3 {
+ status = "disabled";
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A - to PI40
+ * pin 51 - GPIO15 - uart2_rx_m0
+ * pin 55 - GPIO14 - uart2_tx_m0
+ */
+&uart2 {
+ status = "okay";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A - to PI40
+ * pin 46 - GPIO22 - uart7_tx_m2
+ * pin 47 - GPIO23 - uart7_rx_m2
+ */
+&uart7 {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc_5v>;
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ status = "okay";
+};
+
+&vbus {
+ vin-supply = <&vcc_5v>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
new file mode 100644
index 000000000000..5bcd4be32964
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566.dtsi"
+
+/ {
+ model = "Pine64 RK3566 SoQuartz SOM";
+ compatible = "pine64,soquartz", "rockchip,rk3566";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ mmc2 = &sdmmc1;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac1_clkin: external-gmac1-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac1_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_diy: led-diy {
+ label = "diy-led";
+ default-state = "on";
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&diy_led_enable_h>;
+ retain-state-suspended;
+ status = "disabled";
+ };
+
+ led_work: led-work {
+ label = "work-led";
+ default-state = "off";
+ gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_enable_h>;
+ retain-state-suspended;
+ status = "disabled";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ status = "okay";
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+
+ vbus: vbus-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /* sourced from vbus, vbus is provided by the carrier board */
+ vcc5v0_sys: vcc5v0-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vbus>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr_h>;
+ regulator-name = "sdmmc_pwr";
+ status = "disabled";
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_3v3>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m0_miim
+ &gmac1m0_tx_bus2
+ &gmac1m0_rx_bus2
+ &gmac1m0_rgmii_clk
+ &gmac1m0_clkinout
+ &gmac1m0_rgmii_bus>;
+ snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ /* Reset time is 20ms, 100ms for rtl8211f, also works well here */
+ snps,reset-delays-us = <0 20000 100000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ phy-handle = <&rgmii_phy1>;
+ status = "disabled";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-init-microvolt = <900000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_npu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda0v9_image";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vdda0v9_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_acodec";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc3v3_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_pmu";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcca1v8_image";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+ status = "disabled";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ };
+ };
+};
+
+/*
+ * i2c1 is exposed on CM1 / Module1A
+ * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu
+ * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu
+ */
+&i2c1 {
+ status = "disabled";
+};
+
+/*
+ * i2c2 is exposed on CM1 / Module1A
+ * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
+ * pin 58 - i2c2_sda_m1, pullup to vcc_3v3
+ */
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2m1_xfer>;
+ status = "disabled";
+};
+
+/*
+ * i2c3 is exposed on CM1 / Module1A
+ * pin 35 - i2c3_scl_m0, pullup to vcc_3v3
+ * pin 36 - i2c3_sda_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+ status = "disabled";
+};
+
+/*
+ * i2c4 is exposed on CM2 / Module1B
+ * pin 45 - i2c4_scl_m1
+ * pin 47 - i2c4_sda_m1
+ */
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m1_xfer>;
+ status = "disabled";
+};
+
+/*
+ * i2s1_8ch is exposed on CM1 / Module1A
+ * pin 24 - i2s1_sdi1_m1
+ * pin 25 - i2s1_sdo0_m1
+ * pin 26 - i2s1_lrck_tx_m1
+ * pin 27 - i2s1_sdi0_m1
+ * pin 29 - i2s1_sdi3_m1
+ * pin 30 - i2s1_sdi2_m1
+ * pin 40 - i2s1_sdo1_m1, shared with spi3
+ * pin 41 - i2s1_sdo2_m1
+ * pin 49 - i2s1_sclk_tx_m1
+ * pin 50 - i2s1_mclk_m1
+ * pin 56 - i2s1_sdo3_m1, shared with i2c2
+ */
+&i2s1_8ch {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx
+ &i2s1m1_lrcktx &i2s1m1_lrckrx
+ &i2s1m1_sdi0 &i2s1m1_sdi1
+ &i2s1m1_sdi2 &i2s1m1_sdi3
+ &i2s1m1_sdo0 &i2s1m1_sdo1
+ &i2s1m1_sdo2 &i2s1m1_sdo3>;
+ status = "disabled";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ status = "disabled";
+ };
+};
+
+&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ work_led_enable_h: work-led-enable-h {
+ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_enable_h: diy-led-enable-h {
+ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc-pwr {
+ sdmmc_pwr_h: sdmmc-pwr-h {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vcc_3v3>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_3v3>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+/*
+ * saradc is exposed on CM1 / Module1A
+ * pin 94 - saradc_vin3
+ * pin 96 - saradc_vin2
+ */
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "disabled";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ broken-cd;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "disabled";
+};
+
+&sdmmc1 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sys>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+/*
+ * spi3 is exposed on CM1 / Module1A
+ * pin 37 - spi3_cs1_m0
+ * pin 38 - spi3_clk_m0
+ * pin 39 - spi3_cs0_m0
+ * pin 40 - spi3_miso_m0, shared with i2s1_8ch
+ * pin 44 - spi3_mosi_m0
+ */
+&spi3 {
+ status = "disabled";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk809 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcca1v8_pmu>;
+ };
+};
+
+/*
+ * uart2 is exposed on CM1 / Module1A
+ * pin 51 - uart2_rx_m0
+ * pin 55 - uart2_tx_m0
+ */
+&uart2 {
+ status = "disabled";
+};
+
+/*
+ * uart7 is exposed on CM1 / Module1A
+ * pin 46 - uart7_tx_m2
+ * pin 47 - uart7_rx_m2
+ */
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7m2_xfer>;
+ status = "disabled";
+};
+
+/* dwc3_otg is the only usb port available */
+&usb2phy0 {
+ status = "disabled";
+};
+
+&usb2phy0_otg {
+ status = "disabled";
+};
+
+&usb_host0_xhci {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566.dtsi b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
index 3839eef5e4f7..0b957068ff89 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566.dtsi
@@ -6,6 +6,10 @@
compatible = "rockchip,rk3566";
};
+&pipegrf {
+ compatible = "rockchip,rk3566-pipe-grf", "syscon";
+};
+
&power {
power-domain@RK3568_PD_PIPE {
reg = <RK3568_PD_PIPE>;
@@ -18,3 +22,10 @@
#power-domain-cells = <0>;
};
};
+
+&usb_host0_xhci {
+ phys = <&usb2phy0_otg>;
+ phy-names = "usb2-phy";
+ extcon = <&usb2phy0>;
+ maximum-speed = "high-speed";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
index 067fe4a6b178..40cf2236c0b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -73,6 +73,55 @@
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
+
+ vcc5v0_usb: vcc5v0_usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&combphy0 {
+ /* used for USB3 */
+ status = "okay";
+};
+
+&combphy1 {
+ /* used for USB3 */
+ status = "okay";
+};
+
+&combphy2 {
+ /* used for SATA */
+ status = "okay";
};
&gmac0 {
@@ -368,6 +417,16 @@
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+
+ usb {
+ vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pmu_io_domains {
@@ -430,6 +489,10 @@
status = "okay";
};
+&sata2 {
+ status = "okay";
+};
+
&sdhci {
bus-width = <8>;
max-frequency = <200000000>;
@@ -485,3 +548,42 @@
pinctrl-0 = <&uart9m1_xfer>;
status = "disabled";
};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ phy-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index a794a0ea5c70..622be8be9813 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -103,6 +103,18 @@
vin-supply = <&vcc5v0_usb>;
};
+ vcc5v0_usb_otg: vcc5v0-usb-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
vcc3v3_lcd0_n: vcc3v3-lcd0-n {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_lcd0_n";
@@ -136,6 +148,14 @@
};
};
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
&cpu0 {
cpu-supply = <&vdd_cpu>;
};
@@ -507,6 +527,9 @@
vcc5v0_usb_host_en: vcc5v0_usb_host_en {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
@@ -568,6 +591,11 @@
status = "okay";
};
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
&usb_host1_ehci {
status = "okay";
};
@@ -576,6 +604,24 @@
status = "okay";
};
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ vbus-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
&usb2phy1 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
new file mode 100644
index 000000000000..0813c0c5abde
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -0,0 +1,562 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3568.dtsi"
+
+/ {
+ model = "Radxa ROCK3 Model A";
+ compatible = "radxa,rock3a", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac1;
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
+ };
+
+ chosen: chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_user: led-0 {
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+ function = LED_FUNCTION_HEARTBEAT;
+ color = <LED_COLOR_ID_BLUE>;
+ linux,default-trigger = "heartbeat";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_user_en>;
+ };
+ };
+
+ rk809-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "Analog RK809";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&rk809>;
+ };
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc5v0_usb_host: vcc5v0-usb-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_host_en>;
+ regulator-name = "vcc5v0_usb_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_hub: vcc5v0-usb-hub-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_hub_en>;
+ regulator-name = "vcc5v0_usb_hub";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
+ regulator-name = "vcc5v0_usb_otg";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_usb>;
+ };
+};
+
+&combphy0 {
+ status = "okay";
+};
+
+&combphy1 {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+ assigned-clock-rates = <0>, <125000000>;
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-id";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1m1_miim
+ &gmac1m1_tx_bus2
+ &gmac1m1_rx_bus2
+ &gmac1m1_rgmii_clk
+ &gmac1m1_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+ assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+ assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+ #clock-cells = <1>;
+ clock-names = "mclk";
+ clocks = <&cru I2S1_MCLKOUT_TX>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
+ rockchip,system-power-controller;
+ #sound-dai-cells = <0>;
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc5-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ wakeup-source;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-init-microvolt = <900000>;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-name = "vdd_gpu";
+ regulator-always-on;
+ regulator-init-microvolt = <900000>;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-mode = <0x2>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vdd_npu: DCDC_REG4 {
+ regulator-name = "vdd_npu";
+ regulator-init-microvolt = <900000>;
+ regulator-initial-mode = <0x2>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG5 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_image: LDO_REG1 {
+ regulator-name = "vdda0v9_image";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda_0v9: LDO_REG2 {
+ regulator-name = "vdda_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdda0v9_pmu: LDO_REG3 {
+ regulator-name = "vdda0v9_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_pmu: LDO_REG6 {
+ regulator-name = "vcc3v3_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG7 {
+ regulator-name = "vcca_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca1v8_pmu: LDO_REG8 {
+ regulator-name = "vcca1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_image: LDO_REG9 {
+ regulator-name = "vcca1v8_image";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v3: SWITCH_REG1 {
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_sd: SWITCH_REG2 {
+ regulator-name = "vcc3v3_sd";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+
+ codec {
+ mic-in-differential;
+ };
+ };
+};
+
+&i2s1_8ch {
+ rockchip,trcm-sync-tx-only;
+ status = "okay";
+};
+
+&mdio1 {
+ rgmii_phy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth_phy_rst>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pinctrl {
+ ethernet {
+ eth_phy_rst: eth_phy_rst {
+ rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_user_en: led_user_en {
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ vcc5v0_usb_hub_en: vcc5v0_usb_hub_en {
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ vcc5v0_usb_otg_en: vcc5v0_usb_otg_en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v3_pmu>;
+ pmuio2-supply = <&vcc3v3_pmu>;
+ vccio1-supply = <&vccio_acodec>;
+ vccio2-supply = <&vcc_1v8>;
+ vccio3-supply = <&vccio_sd>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_3v3>;
+ vccio6-supply = <&vcc_1v8>;
+ vccio7-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ extcon = <&usb2phy0>;
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host1_xhci {
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy0_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy0_otg {
+ vbus-supply = <&vcc5v0_usb_otg>;
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb2phy1_host {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
+
+&usb2phy1_otg {
+ phy-supply = <&vcc5v0_usb_host>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 5b0f528d6818..5eafddf62edc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -8,6 +8,20 @@
/ {
compatible = "rockchip,rk3568";
+ sata0: sata@fc000000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc000000 0 0x1000>;
+ clocks = <&cru ACLK_SATA0>, <&cru CLK_SATA0_PMALIVE>,
+ <&cru CLK_SATA0_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy0 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
+ status = "disabled";
+ };
+
pipe_phy_grf0: syscon@fdc70000 {
compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
reg = <0x0 0xfdc70000 0x0 0x1000>;
@@ -99,6 +113,10 @@
};
};
+&pipegrf {
+ compatible = "rockchip,rk3568-pipe-grf", "syscon";
+};
+
&power {
power-domain@RK3568_PD_PIPE {
reg = <RK3568_PD_PIPE>;
@@ -114,3 +132,8 @@
#power-domain-cells = <0>;
};
};
+
+&usb_host0_xhci {
+ phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 7cdef800cb3c..1042e68602de 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -230,6 +230,68 @@
};
};
+ sata1: sata@fc400000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc400000 0 0x1000>;
+ clocks = <&cru ACLK_SATA1>, <&cru CLK_SATA1_PMALIVE>,
+ <&cru CLK_SATA1_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy1 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
+ status = "disabled";
+ };
+
+ sata2: sata@fc800000 {
+ compatible = "rockchip,rk3568-dwc-ahci", "snps,dwc-ahci";
+ reg = <0 0xfc800000 0 0x1000>;
+ clocks = <&cru ACLK_SATA2>, <&cru CLK_SATA2_PMALIVE>,
+ <&cru CLK_SATA2_RXOOB>;
+ clock-names = "sata", "pmalive", "rxoob";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&combphy2 PHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ ports-implemented = <0x1>;
+ power-domains = <&power RK3568_PD_PIPE>;
+ status = "disabled";
+ };
+
+ usb_host0_xhci: usb@fcc00000 {
+ compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+ reg = <0x0 0xfcc00000 0x0 0x400000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
+ <&cru ACLK_USB3OTG0>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3568_PD_PIPE>;
+ resets = <&cru SRST_USB3OTG0>;
+ snps,dis_u2_susphy_quirk;
+ status = "disabled";
+ };
+
+ usb_host1_xhci: usb@fd000000 {
+ compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+ reg = <0x0 0xfd000000 0x0 0x400000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
+ <&cru ACLK_USB3OTG1>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "host";
+ phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
+ phy-names = "usb2-phy", "usb3-phy";
+ phy_type = "utmi_wide";
+ power-domains = <&power RK3568_PD_PIPE>;
+ resets = <&cru SRST_USB3OTG1>;
+ snps,dis_u2_susphy_quirk;
+ status = "disabled";
+ };
+
gic: interrupt-controller@fd400000 {
compatible = "arm,gic-v3";
reg = <0x0 0xfd400000 0 0x10000>, /* GICD */
@@ -297,7 +359,6 @@
};
pipegrf: syscon@fdc50000 {
- compatible = "rockchip,rk3568-pipe-grf", "syscon";
reg = <0x0 0xfdc50000 0x0 0x1000>;
};
@@ -717,6 +778,17 @@
status = "disabled";
};
+ sfc: spi@fe300000 {
+ compatible = "rockchip,sfc";
+ reg = <0x0 0xfe300000 0x0 0x4000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
+ clock-names = "clk_sfc", "hclk_sfc";
+ pinctrl-0 = <&fspi_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
sdhci: mmc@fe310000 {
compatible = "rockchip,rk3568-dwcmshc";
reg = <0x0 0xfe310000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
deleted file mode 100644
index 4bb5d650df9c..000000000000
--- a/arch/arm64/boot/dts/synaptics/as370.dtsi
+++ /dev/null
@@ -1,173 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2018 Synaptics Incorporated
- *
- * Author: Jisheng Zhang <jszhang@kernel.org>
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "syna,as370";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x0>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_SLEEP_0>;
- };
-
- cpu1: cpu@1 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x1>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_SLEEP_0>;
- };
-
- cpu2: cpu@2 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x2>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_SLEEP_0>;
- };
-
- cpu3: cpu@3 {
- compatible = "arm,cortex-a53";
- device_type = "cpu";
- reg = <0x3>;
- enable-method = "psci";
- next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_SLEEP_0>;
- };
-
- l2: cache {
- compatible = "cache";
- };
-
- idle-states {
- entry-method = "psci";
- CPU_SLEEP_0: cpu-sleep-0 {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <75>;
- exit-latency-us = <155>;
- min-residency-us = <1000>;
- };
- };
- };
-
- osc: osc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>,
- <&cpu1>,
- <&cpu2>,
- <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- soc@f7000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0xf7000000 0x1000000>;
-
- gic: interrupt-controller@901000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x901000 0x1000>,
- <0x902000 0x2000>,
- <0x904000 0x2000>,
- <0x906000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- apb@e80000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xe80000 0x10000>;
-
- uart0: serial@c00 {
- compatible = "snps,dw-apb-uart";
- reg = <0xc00 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&osc>;
- reg-shift = <2>;
- status = "disabled";
- };
-
- gpio0: gpio@1800 {
- compatible = "snps,dw-apb-gpio";
- reg = <0x1800 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- porta: gpio-port@0 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- gpio1: gpio@2000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0x2000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- portb: gpio-port@1 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- ngpios = <32>;
- reg = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
- };
- };
-};
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index 9a652abcbcac..af39655331de 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -432,8 +432,6 @@
reg = <0x0 0x10100000 0x0 0x1000>;
interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
clock-names = "apb_pclk";
iommus = <&smmu_imem 0x800 0x0>;
@@ -444,8 +442,6 @@
reg = <0x0 0x10110000 0x0 0x1000>;
interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
clock-names = "apb_pclk";
iommus = <&smmu_imem 0x801 0x0>;
@@ -456,8 +452,6 @@
reg = <0x0 0x14280000 0x0 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
clock-names = "apb_pclk";
iommus = <&smmu_peric 0x2 0x0>;
@@ -468,8 +462,6 @@
reg = <0x0 0x14290000 0x0 0x1000>;
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
clock-names = "apb_pclk";
iommus = <&smmu_peric 0x1 0x0>;
@@ -727,7 +719,7 @@
};
timer@10040000 {
- compatible = "samsung,exynos4210-mct";
+ compatible = "tesla,fsd-mct", "samsung,exynos4210-mct";
reg = <0x0 0x10040000 0x0 0x800>;
interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index c68472c692f4..d08abad0bcf4 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -6,6 +6,14 @@
*/
&cbass_main {
+ oc_sram: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x70000000 0x00 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x70000000 0x10000>;
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
@@ -40,6 +48,12 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x00100000 0x20000>;
+
+ phy_gmii_sel: phy@4044 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4044 0x8>;
+ #phy-cells = <1>;
+ };
};
dmss: bus@48000000 {
@@ -61,6 +75,69 @@
interrupt-names = "rx_012";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ inta_main_dmss: interrupt-controller@48000000 {
+ compatible = "ti,sci-inta";
+ reg = <0x00 0x48000000 0x00 0x100000>;
+ #interrupt-cells = <0>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <28>;
+ ti,interrupt-ranges = <4 68 36>;
+ ti,unmapped-event-sources = <&main_bcdma>, <&main_pktdma>;
+ };
+
+ main_bcdma: dma-controller@485c0100 {
+ compatible = "ti,am64-dmss-bcdma";
+ reg = <0x00 0x485c0100 0x00 0x100>,
+ <0x00 0x4c000000 0x00 0x20000>,
+ <0x00 0x4a820000 0x00 0x20000>,
+ <0x00 0x4aa40000 0x00 0x20000>,
+ <0x00 0x4bc00000 0x00 0x100000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss>;
+ #dma-cells = <3>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <26>;
+ ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+ ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+ ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+ };
+
+ main_pktdma: dma-controller@485c0000 {
+ compatible = "ti,am64-dmss-pktdma";
+ reg = <0x00 0x485c0000 0x00 0x100>,
+ <0x00 0x4a800000 0x00 0x20000>,
+ <0x00 0x4aa00000 0x00 0x40000>,
+ <0x00 0x4b800000 0x00 0x400000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss>;
+ #dma-cells = <2>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <30>;
+ ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+ <0x24>, /* CPSW_TX_CHAN */
+ <0x25>, /* SAUL_TX_0_CHAN */
+ <0x26>; /* SAUL_TX_1_CHAN */
+ ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+ <0x11>, /* RING_CPSW_TX_CHAN */
+ <0x12>, /* RING_SAUL_TX_0_CHAN */
+ <0x13>; /* RING_SAUL_TX_1_CHAN */
+ ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+ <0x2b>, /* CPSW_RX_CHAN */
+ <0x2d>, /* SAUL_RX_0_CHAN */
+ <0x2f>, /* SAUL_RX_1_CHAN */
+ <0x31>, /* SAUL_RX_2_CHAN */
+ <0x33>; /* SAUL_RX_3_CHAN */
+ ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+ <0x2c>, /* FLOW_CPSW_RX_CHAN */
+ <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+ <0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+ };
};
dmsc: system-controller@44043000 {
@@ -203,6 +280,36 @@
clock-names = "fck";
};
+ main_spi0: spi@20100000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x20100000 0x00 0x400>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 172 0>;
+ };
+
+ main_spi1: spi@20110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x20110000 0x00 0x400>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 173 0>;
+ };
+
+ main_spi2: spi@20120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x20120000 0x00 0x400>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 174 0>;
+ };
+
main_gpio_intr: interrupt-controller@a00000 {
compatible = "ti,sci-intr";
reg = <0x00 0x00a00000 0x00 0x800>;
@@ -249,6 +356,165 @@
clock-names = "gpio";
};
+ sdhci0: mmc@fa10000 {
+ compatible = "ti,am62-sdhci";
+ reg = <0x00 0x0fa10000 0x00 0x1000>, <0x00 0x0fa18000 0x00 0x400>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
+ clock-names = "clk_ahb", "clk_xin";
+ assigned-clocks = <&k3_clks 57 6>;
+ assigned-clock-parents = <&k3_clks 57 8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ ti,trm-icp = <0x2>;
+ bus-width = <8>;
+ ti,clkbuf-sel = <0x7>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-mmc-hs = <0x0>;
+ ti,otap-del-sel-ddr52 = <0x9>;
+ ti,otap-del-sel-hs200 = <0x6>;
+ };
+
+ sdhci1: mmc@fa00000 {
+ compatible = "ti,am62-sdhci";
+ reg = <0x00 0x0fa00000 0x00 0x1000>, <0x00 0x0fa08000 0x00 0x400>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
+ clock-names = "clk_ahb", "clk_xin";
+ ti,trm-icp = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x6>;
+ ti,otap-del-sel-ddr50 = <0x9>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,clkbuf-sel = <0x7>;
+ bus-width = <4>;
+ };
+
+ sdhci2: mmc@fa20000 {
+ compatible = "ti,am62-sdhci";
+ reg = <0x00 0x0fa20000 0x00 0x1000>, <0x00 0x0fa28000 0x00 0x400>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
+ clock-names = "clk_ahb", "clk_xin";
+ ti,trm-icp = <0x2>;
+ ti,otap-del-sel-legacy = <0x0>;
+ ti,otap-del-sel-sd-hs = <0x0>;
+ ti,otap-del-sel-sdr12 = <0xf>;
+ ti,otap-del-sel-sdr25 = <0xf>;
+ ti,otap-del-sel-sdr50 = <0xc>;
+ ti,otap-del-sel-sdr104 = <0x6>;
+ ti,otap-del-sel-ddr50 = <0x9>;
+ ti,itap-del-sel-legacy = <0x0>;
+ ti,itap-del-sel-sd-hs = <0x0>;
+ ti,itap-del-sel-sdr12 = <0x0>;
+ ti,itap-del-sel-sdr25 = <0x0>;
+ ti,clkbuf-sel = <0x7>;
+ };
+
+ fss: bus@fc00000 {
+ compatible = "simple-bus";
+ reg = <0x00 0x0fc00000 0x00 0x70000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@fc40000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x0fc40000 0x00 0x100>,
+ <0x05 0x00000000 0x01 0x00000000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 75 7>;
+ assigned-clocks = <&k3_clks 75 7>;
+ assigned-clock-parents = <&k3_clks 75 8>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cpsw3g: ethernet@8000000 {
+ compatible = "ti,am642-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x00 0x08000000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x00 0x00 0x00 0x08000000 0x00 0x200000>;
+ clocks = <&k3_clks 13 0>;
+ assigned-clocks = <&k3_clks 13 3>;
+ assigned-clock-parents = <&k3_clks 13 11>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&main_pktdma 0xc600 15>,
+ <&main_pktdma 0xc601 15>,
+ <&main_pktdma 0xc602 15>,
+ <&main_pktdma 0xc603 15>,
+ <&main_pktdma 0xc604 15>,
+ <&main_pktdma 0xc605 15>,
+ <&main_pktdma 0xc606 15>,
+ <&main_pktdma 0xc607 15>,
+ <&main_pktdma 0x4600 15>;
+ dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
+ "tx7", "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port@1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ phys = <&phy_gmii_sel 1>;
+ mac-address = [00 00 00 00 00 00];
+ ti,syscon-efuse = <&wkup_conf 0x200>;
+ };
+
+ cpsw_port2: port@2 {
+ reg = <2>;
+ ti,mac-only;
+ label = "port2";
+ phys = <&phy_gmii_sel 2>;
+ mac-address = [00 00 00 00 00 00];
+ };
+ };
+
+ cpsw3g_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 13 0>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ };
+
+ cpts@3d000 {
+ compatible = "ti,j721e-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 13 3>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
hwspinlock: spinlock@2a000000 {
compatible = "ti,am64-hwspinlock";
reg = <0x00 0x2a000000 0x00 0x1000>;
@@ -264,4 +530,45 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
};
+
+ ecap0: pwm@23100000 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x00 0x23100000 0x00 0x100>;
+ power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 51 0>;
+ clock-names = "fck";
+ };
+
+ ecap1: pwm@23110000 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x00 0x23110000 0x00 0x100>;
+ power-domains = <&k3_pds 52 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 52 0>;
+ clock-names = "fck";
+ };
+
+ ecap2: pwm@23120000 {
+ compatible = "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x00 0x23120000 0x00 0x100>;
+ power-domains = <&k3_pds 53 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 53 0>;
+ clock-names = "fck";
+ };
+
+ main_mcan0: can@20701000 {
+ compatible = "bosch,m_can";
+ reg = <0x00 0x20701000 0x00 0x200>,
+ <0x00 0x20708000 0x00 0x8000>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 98 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 98 6>, <&k3_clks 98 1>;
+ clock-names = "hclk", "cclk";
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
index 9d210d55fc71..f56c803560f2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -33,4 +33,52 @@
clocks = <&k3_clks 106 2>;
clock-names = "fck";
};
+
+ mcu_spi0: spi@4b00000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x04b00000 0x00 0x400>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 147 0>;
+ };
+
+ mcu_spi1: spi@4b10000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x04b10000 0x00 0x400>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 148 0>;
+ };
+
+ mcu_gpio_intr: interrupt-controller@4210000 {
+ compatible = "ti,sci-intr";
+ reg = <0x00 0x04210000 0x00 0x200>;
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <1>;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <5>;
+ ti,interrupt-ranges = <0 104 4>;
+ };
+
+ mcu_gpio0: gpio@4201000 {
+ compatible = "ti,am64-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x4201000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&mcu_gpio_intr>;
+ interrupts = <30>, <31>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <24>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 79 0>;
+ clock-names = "gpio";
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index bc2997b18556..37fcbe7a3c33 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -66,6 +66,7 @@
<0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
<0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
<0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+ <0x00 0x40900000 0x00 0x40900000 0x00 0x00030000>, /* SA3UL */
<0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
<0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
<0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 0de4113ccd5d..39fb1d763037 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -9,6 +9,7 @@
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am625.dtsi"
/ {
@@ -17,6 +18,12 @@
aliases {
serial2 = &main_uart0;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ mmc2 = &sdhci2;
+ spi0 = &ospi0;
+ ethernet0 = &cpsw_port1;
+ ethernet1 = &cpsw_port2;
};
chosen {
@@ -87,6 +94,33 @@
regulator-boot-on;
};
+ vdd_mmc1: regulator-3 {
+ /* TPS22918DBVR */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_mmc1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ vin-supply = <&vcc_3v3_sys>;
+ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ vdd_sd_dv: regulator-4 {
+ /* Output of TLV71033 */
+ compatible = "regulator-gpio";
+ regulator-name = "tlv71033";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_sd_dv_pins_default>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ vin-supply = <&vcc_5v0>;
+ gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0>,
+ <3300000 0x1>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -124,11 +158,114 @@
>;
};
+ main_i2c2_pins_default: main-i2c2-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0b0, PIN_INPUT_PULLUP, 1) /* (K22) GPMC0_CSn2.I2C2_SCL */
+ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24) GPMC0_CSn3.I2C2_SDA */
+ >;
+ };
+
+ main_mmc0_pins_default: main-mmc0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+ AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+ AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+ AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1) MMC0_DAT1 */
+ AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3) MMC0_DAT2 */
+ AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4) MMC0_DAT3 */
+ AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2) MMC0_DAT4 */
+ AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1) MMC0_DAT5 */
+ AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2) MMC0_DAT6 */
+ AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2) MMC0_DAT7 */
+ >;
+ };
+
+ main_mmc1_pins_default: main-mmc1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
+ AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22) MMC1_CLK */
+ AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22) MMC1_DAT0 */
+ AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21) MMC1_DAT1 */
+ AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21) MMC1_DAT2 */
+ AM62X_IOPAD(0x224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
+ AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
+ >;
+ };
+
usr_led_pins_default: usr-led-pins-default {
pinctrl-single,pins = <
AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
>;
};
+
+ main_mdio1_pins_default: main-mdio1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */
+ AM62X_IOPAD(0x15c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */
+ >;
+ };
+
+ main_rgmii1_pins_default: main-rgmii1-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x14c, PIN_INPUT, 0) /* (AB17) RGMII1_RD0 */
+ AM62X_IOPAD(0x150, PIN_INPUT, 0) /* (AC17) RGMII1_RD1 */
+ AM62X_IOPAD(0x154, PIN_INPUT, 0) /* (AB16) RGMII1_RD2 */
+ AM62X_IOPAD(0x158, PIN_INPUT, 0) /* (AA15) RGMII1_RD3 */
+ AM62X_IOPAD(0x148, PIN_INPUT, 0) /* (AD17) RGMII1_RXC */
+ AM62X_IOPAD(0x144, PIN_INPUT, 0) /* (AE17) RGMII1_RX_CTL */
+ AM62X_IOPAD(0x134, PIN_OUTPUT, 0) /* (AE20) RGMII1_TD0 */
+ AM62X_IOPAD(0x138, PIN_OUTPUT, 0) /* (AD20) RGMII1_TD1 */
+ AM62X_IOPAD(0x13c, PIN_OUTPUT, 0) /* (AE18) RGMII1_TD2 */
+ AM62X_IOPAD(0x140, PIN_OUTPUT, 0) /* (AD18) RGMII1_TD3 */
+ AM62X_IOPAD(0x130, PIN_OUTPUT, 0) /* (AE19) RGMII1_TXC */
+ AM62X_IOPAD(0x12c, PIN_OUTPUT, 0) /* (AD19) RGMII1_TX_CTL */
+ >;
+ };
+
+ main_rgmii2_pins_default: main-rgmii2-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+ AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+ AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+ AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+ AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+ AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+ AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+ AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+ AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+ AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+ AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+ AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+ >;
+ };
+
+ ospi0_pins_default: ospi0-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+ AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+ AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+ AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+ AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+ AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+ AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+ AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+ AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+ AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+ AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+ >;
+ };
+
+ vdd_sd_dv_pins_default: vdd-sd-dv-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+ >;
+ };
+
+ main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-pins-default {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+ >;
+ };
};
&wkup_uart0 {
@@ -188,6 +325,33 @@
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
+
+ exp1: gpio@22 {
+ compatible = "ti,tca6424";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+ "PRU_DETECT", "MMC1_SD_EN",
+ "VPP_LDO_EN", "EXP_PS_3V3_En",
+ "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+ "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+ "UART1_FET_BUF_EN", "WL_LT_EN",
+ "GPIO_HDMI_RSTn", "CSI_GPIO1",
+ "CSI_GPIO2", "PRU_3V3_EN",
+ "HDMI_INTn", "TEST_GPIO2",
+ "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+ "MCASP1_FET_SEL", "UART1_FET_SEL",
+ "TSINT#", "IO_EXP_TEST_LED";
+
+ interrupt-parent = <&main_gpio1>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+ };
};
&main_i2c2 {
@@ -198,9 +362,134 @@
status = "disabled";
};
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&sdhci1 {
+ /* SD/MMC */
+ vmmc-supply = <&vdd_mmc1>;
+ vqmmc-supply = <&vdd_sd_dv>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&cpsw3g {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mdio1_pins_default
+ &main_rgmii1_pins_default
+ &main_rgmii2_pins_default>;
+};
+
+&cpsw_port1 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy0>;
+};
+
+&cpsw_port2 {
+ phy-mode = "rgmii-rxid";
+ phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+ cpsw3g_phy0: ethernet-phy@0 {
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+
+ cpsw3g_phy1: ethernet-phy@1 {
+ reg = <1>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,min-output-impedance;
+ };
+};
+
&mailbox0_cluster0 {
mbox_m4_0: mbox-m4-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition@80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "ospi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
+ };
+};
+
+&ecap0 {
+ status = "disabled";
+};
+
+&ecap1 {
+ status = "disabled";
+};
+
+&ecap2 {
+ status = "disabled";
+};
+
+&main_mcan0 {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
index 2bb5c9ff172c..02d4285acbb8 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi
@@ -10,7 +10,6 @@
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a00000 0x00 0x100>;
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 149 0>;
@@ -21,7 +20,6 @@
compatible = "ti,am64-uart", "ti,am654-uart";
reg = <0x00 0x04a10000 0x00 0x100>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 160 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1d7db8bf3a5c..59f506cbd275 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -125,6 +125,31 @@
vin-supply = <&vcc_3v3_sys>;
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
};
+
+ com8_ls_en: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "com8_ls_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ pinctrl-0 = <&main_com8_ls_en_pins_default>;
+ pinctrl-names = "default";
+ gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan_en: regulator-2 {
+ /* output of SN74AVC4T245RSVR */
+ compatible = "regulator-fixed";
+ regulator-name = "wlan_en";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ pinctrl-0 = <&main_wlan_en_pins_default>;
+ pinctrl-names = "default";
+ vin-supply = <&com8_ls_en>;
+ gpio = <&main_gpio0 48 GPIO_ACTIVE_HIGH>;
+ };
};
&main_pmx0 {
@@ -216,6 +241,23 @@
AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */
>;
};
+ main_wlan_en_pins_default: main-wlan-en-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */
+ >;
+ };
+
+ main_com8_ls_en_pins_default: main-com8-ls-en-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */
+ >;
+ };
+
+ main_wlan_pins_default: main-wlan-pins-default {
+ pinctrl-single,pins = <
+ AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */
+ >;
+ };
};
&mcu_uart0 {
@@ -293,6 +335,26 @@
status = "reserved";
};
+&sdhci0 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ ti,driver-strength-ohm = <50>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ pinctrl-0 = <&main_wlan_pins_default>;
+ pinctrl-names = "default";
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <46 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
&sdhci1 {
/* SD/MMC */
vmmc-supply = <&vdd_mmc1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index f5ca8e26ed99..2bc26a296496 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -148,6 +148,28 @@
pinctrl-0 = <&main_mcan2_gpio_pins_default>;
standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>;
};
+
+ dp_pwr_3v3: regulator-dp-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "dp-pwr";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */
+ enable-active-high;
+ };
+
+ dp0: connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+ dp-pwr-supply = <&dp_pwr_3v3>;
+
+ port {
+ dp_connector_in: endpoint {
+ remote-endpoint = <&dp0_out>;
+ };
+ };
+ };
};
&main_pmx0 {
@@ -190,6 +212,12 @@
>;
};
+ dp0_pins_default: dp0-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */
+ >;
+ };
+
main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
@@ -658,6 +686,33 @@
<&k3_clks 152 18>; /* PLL23_HSDIV0 */
};
+&dss_ports {
+ port {
+ dpi0_out: endpoint {
+ remote-endpoint = <&dp0_in>;
+ };
+ };
+};
+
+&dp0_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ dp0_out: endpoint {
+ remote-endpoint = <&dp_connector_in>;
+ };
+ };
+};
+
&mcasp0 {
status = "disabled";
};
@@ -793,6 +848,24 @@
};
};
+&serdes4 {
+ torrent_phy_dp: phy@0 {
+ reg = <0>;
+ resets = <&serdes_wiz4 1>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <5400>;
+ #phy-cells = <0>;
+ };
+};
+
+&mhdp {
+ phys = <&torrent_phy_dp>;
+ phy-names = "dpphy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp0_pins_default>;
+};
+
&pcie0_rc {
reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
phys = <&serdes0_pcie_link>;
@@ -843,10 +916,6 @@
status = "disabled";
};
-&dss {
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index db0669985e42..43b6cf5791ee 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -5,6 +5,7 @@
* Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/phy/phy-ti.h>
#include <dt-bindings/mux/mux.h>
#include <dt-bindings/mux/ti-serdes.h>
@@ -789,6 +790,47 @@
#size-cells = <2>;
};
+ serdes_wiz4: wiz@5050000 {
+ compatible = "ti,am64-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 297 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 297 1>, <&k3_clks 297 9>, <&cmn_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ assigned-clocks = <&k3_clks 297 9>;
+ assigned-clock-parents = <&k3_clks 297 10>;
+ assigned-clock-rates = <19200000>;
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x05050000 0x00 0x05050000 0x010000>,
+ <0x0a030a00 0x00 0x0a030a00 0x40>;
+
+ serdes4: serdes@5050000 {
+ /*
+ * Note: we also map DPTX PHY registers as the Torrent
+ * needs to manage those.
+ */
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05050000 0x010000>,
+ <0x0a030a00 0x40>; /* DPTX PHY */
+ reg-names = "torrent_phy", "dptx_phy";
+
+ resets = <&serdes_wiz4 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>;
+ clock-names = "refclk";
+ assigned-clocks = <&serdes_wiz4 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz4 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 297 9>,
+ <&k3_clks 297 9>,
+ <&k3_clks 297 9>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,j721e-uart", "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
@@ -1267,6 +1309,37 @@
};
};
+ mhdp: dp-bridge@a000000 {
+ compatible = "ti,j721e-mhdp8546";
+ /*
+ * Note: we do not map DPTX PHY area, as that is handled by
+ * the PHY driver.
+ */
+ reg = <0x00 0x0a000000 0x00 0x030a00>, /* DSS_EDP0_V2A_CORE_VP_REGS_APB */
+ <0x00 0x04f40000 0x00 0x20>; /* DSS_EDP0_INTG_CFG_VP */
+ reg-names = "mhdptx", "j721e-intg";
+
+ clocks = <&k3_clks 151 36>;
+
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
+
+ power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
+
+ dp0_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@4 {
+ reg = <4>;
+ };
+ };
+ };
+
dss: dss@4a00000 {
compatible = "ti,j721e-dss";
reg =
@@ -1317,8 +1390,6 @@
"common_s2";
dss_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index f25d85169e0d..80358cba6954 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -213,6 +213,71 @@
enable-active-high;
};
+ dp0: connector {
+ compatible = "dp-connector";
+ label = "DP0";
+ type = "full-size";
+ dp-pwr-supply = <&dp_pwr_3v3>;
+
+ port {
+ dp_connector_in: endpoint {
+ remote-endpoint = <&dp0_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_pins_default>;
+
+ ddc-i2c-bus = <&main_i2c1>;
+
+ /* HDMI_HPD */
+ hpd-gpios = <&main_gpio1 0 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ dvi-bridge {
+ compatible = "ti,tfp410";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pdn_pins_default>;
+
+ powerdown-gpios = <&main_gpio0 127 GPIO_ACTIVE_LOW>;
+ ti,deskew = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint {
+ remote-endpoint = <&dpi1_out>;
+ pclk-sample = <1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint {
+ remote-endpoint =
+ <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
};
&main_pmx0 {
@@ -317,6 +382,18 @@
>;
};
+ hdmi_hpd_pins_default: hdmi-hpd-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x204, PIN_INPUT, 7) /* (AD5) UART1_RTSn.GPIO1_0 */
+ >;
+ };
+
+ hdmi_pdn_pins_default: hdmi-pdn-pins-default {
+ pinctrl-single,pins = <
+ J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */
+ >;
+ };
+
/* Reset for M.2 E Key slot on PCIe0 */
ekey_reset_pins_default: ekey-reset-pns-pins-default {
pinctrl-single,pins = <
@@ -624,6 +701,24 @@
};
};
+&serdes4 {
+ torrent_phy_dp: phy@0 {
+ reg = <0>;
+ resets = <&serdes_wiz4 1>;
+ cdns,phy-type = <PHY_TYPE_DP>;
+ cdns,num-lanes = <4>;
+ cdns,max-bit-rate = <5400>;
+ #phy-cells = <0>;
+ };
+};
+
+&mhdp {
+ phys = <&torrent_phy_dp>;
+ phy-names = "dpphy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp0_pins_default>;
+};
+
&usbss0 {
pinctrl-names = "default";
pinctrl-0 = <&main_usbss0_pins_default>;
@@ -702,6 +797,46 @@
<&k3_clks 152 18>; /* DPI1_EXT_CLKSEL_OUT0 */
};
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpi0_out: endpoint {
+ remote-endpoint = <&dp0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ dpi1_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ };
+ };
+};
+
+&dp0_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp0_in: endpoint {
+ remote-endpoint = <&dpi0_out>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ dp0_out: endpoint {
+ remote-endpoint = <&dp_connector_in>;
+ };
+ };
+};
+
&mcasp0 {
/* Unused */
status = "disabled";
@@ -836,10 +971,6 @@
status = "disabled";
};
-&dss {
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
index 9375b0faeea2..d209fdc98597 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts
@@ -32,22 +32,16 @@
&uart0 {
status = "okay";
- clocks = <&uart_clk>;
- clock-names = "apb_pclk";
};
&uart1 {
status = "okay";
- clocks = <&uart_clk>;
- clock-names = "apb_pclk";
};
&piether {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- clocks = <&clk300mhz>, <&clk125mhz>;
- clock-names = "stmmaceth", "phy_ref_clk";
mdio0 {
#address-cells = <1>;
@@ -62,7 +56,6 @@
&wdt {
status = "okay";
- clocks = <&wdt_clk>;
};
&gpio {
@@ -79,6 +72,4 @@
&pcie {
status = "okay";
- clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
- clock-names = "ref", "core", "aux";
};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
index d0817463706e..ed7aa7e457b1 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts
@@ -32,22 +32,16 @@
&uart0 {
status = "okay";
- clocks = <&uart_clk>;
- clock-names = "apb_pclk";
};
&uart1 {
status = "okay";
- clocks = <&uart_clk>;
- clock-names = "apb_pclk";
};
&piether {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- clocks = <&clk300mhz>, <&clk125mhz>;
- clock-names = "stmmaceth", "phy_ref_clk";
mdio0 {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
index f0a93db6dde6..0c8321022a73 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi
@@ -13,7 +13,6 @@
&wdt {
status = "okay";
- clocks = <&wdt_clk>;
};
&gpio {
@@ -26,8 +25,6 @@
&spi0 {
status = "okay";
- clocks = <&clk300mhz>, <&clk150mhz>;
- clock-names = "sspclk", "apb_pclk";
mmc-slot@0 {
compatible = "mmc-spi-slot";
@@ -40,5 +37,4 @@
&i2c0 {
status = "okay";
- clocks = <&clk150mhz>;
};
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 01d7ee61ad25..0fc32c036f30 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/clock/toshiba,tmpv770x.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -128,47 +129,6 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
};
- uart_clk: uart-clk {
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- #clock-cells = <0>;
- };
-
- clk25mhz: clk25mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- clock-output-names = "clk25mhz";
- };
-
- clk125mhz: clk125mhz {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- #clock-cells = <0>;
- clock-output-names = "clk125mhz";
- };
-
- clk150mhz: clk150mhz {
- compatible = "fixed-clock";
- clock-frequency = <150000000>;
- #clock-cells = <0>;
- clock-output-names = "clk150mhz";
- };
-
- clk300mhz: clk300mhz {
- compatible = "fixed-clock";
- clock-frequency = <300000000>;
- #clock-cells = <0>;
- clock-output-names = "clk300mhz";
- };
-
- clk600mhz: clk600mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <600000000>;
- clock-output-names = "clk600mhz";
- };
-
extclk100mhz: extclk100mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -176,9 +136,9 @@
clock-output-names = "extclk100mhz";
};
- wdt_clk: wdt-clk {
+ osc2_clk: osc2-clk {
compatible = "fixed-clock";
- clock-frequency = <150000000>;
+ clock-frequency = <20000000>;
#clock-cells = <0>;
};
@@ -216,12 +176,28 @@
interrupt-parent = <&gic>;
};
+ pipllct: clock-controller@24220000 {
+ compatible = "toshiba,tmpv7708-pipllct";
+ reg = <0 0x24220000 0 0x820>;
+ #clock-cells = <1>;
+ clocks = <&osc2_clk>;
+ };
+
+ pismu: syscon@24200000 {
+ compatible = "toshiba,tmpv7708-pismu", "syscon";
+ reg = <0 0x24200000 0 0x2140>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
uart0: serial@28200000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0 0x28200000 0 0x1000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
+ clocks = <&pismu TMPV770X_CLK_PIUART0>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -231,6 +207,8 @@
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
+ clocks = <&pismu TMPV770X_CLK_PIUART1>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -240,6 +218,8 @@
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+ clocks = <&pismu TMPV770X_CLK_PIUART2>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -249,6 +229,8 @@
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ clocks = <&pismu TMPV770X_CLK_PIUART2>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -261,6 +243,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C0>;
status = "disabled";
};
@@ -273,6 +256,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C1>;
status = "disabled";
};
@@ -285,6 +269,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C2>;
status = "disabled";
};
@@ -297,6 +282,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C3>;
status = "disabled";
};
@@ -309,6 +295,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C4>;
status = "disabled";
};
@@ -321,6 +308,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C5>;
status = "disabled";
};
@@ -333,6 +321,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C6>;
status = "disabled";
};
@@ -345,6 +334,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C7>;
status = "disabled";
};
@@ -357,6 +347,7 @@
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PII2C8>;
status = "disabled";
};
@@ -369,6 +360,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI1>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -381,6 +374,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI1>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -393,6 +388,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI2>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -405,6 +402,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI3>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -417,6 +416,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI4>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -429,6 +430,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI5>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -441,6 +444,8 @@
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&pismu TMPV770X_CLK_PISPI6>;
+ clock-names = "apb_pclk";
status = "disabled";
};
@@ -452,12 +457,15 @@
snps,txpbl = <4>;
snps,rxpbl = <4>;
snps,tso;
+ clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
+ clock-names = "stmmaceth", "phy_ref_clk";
status = "disabled";
};
wdt: wdt@28330000 {
compatible = "toshiba,visconti-wdt";
reg = <0 0x28330000 0 0x1000>;
+ clocks = <&pismu TMPV770X_CLK_WDTCLK>;
status = "disabled";
};
@@ -498,6 +506,8 @@
0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
max-link-speed = <2>;
+ clocks = <&extclk100mhz>, <&pismu TMPV770X_CLK_PCIE_MSTR>, <&pismu TMPV770X_CLK_PCIE_AUX>;
+ clock-names = "ref", "core", "aux";
status = "disabled";
};
};
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h b/include/dt-bindings/clock/qcom,gcc-msm8998.h
index 72c99e486d86..1badb4f9c58f 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8998.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h
@@ -186,6 +186,10 @@
#define UFS_UNIPRO_CORE_CLK_SRC 177
#define GCC_MMSS_GPLL0_CLK 178
#define HMSS_GPLL0_CLK_SRC 179
+#define GCC_IM_SLEEP 180
+#define AGGRE2_SNOC_NORTH_AXI 181
+#define SSC_XO 182
+#define SSC_CNOC_AHBS_CLK 183
#define PCIE_0_GDSC 0
#define UFS_GDSC 1
diff --git a/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
new file mode 100644
index 000000000000..20ef2ea673f3
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H
+#define _DT_BINDINGS_CLK_QCOM_LPASS_AUDIO_CC_SC7280_H
+
+/* LPASS_AUDIO_CC clocks */
+#define LPASS_AUDIO_CC_PLL 0
+#define LPASS_AUDIO_CC_PLL_OUT_AUX2 1
+#define LPASS_AUDIO_CC_PLL_OUT_AUX2_DIV_CLK_SRC 2
+#define LPASS_AUDIO_CC_PLL_OUT_MAIN_DIV_CLK_SRC 3
+#define LPASS_AUDIO_CC_CDIV_RX_MCLK_DIV_CLK_SRC 4
+#define LPASS_AUDIO_CC_CODEC_MEM0_CLK 5
+#define LPASS_AUDIO_CC_CODEC_MEM1_CLK 6
+#define LPASS_AUDIO_CC_CODEC_MEM2_CLK 7
+#define LPASS_AUDIO_CC_CODEC_MEM_CLK 8
+#define LPASS_AUDIO_CC_EXT_MCLK0_CLK 9
+#define LPASS_AUDIO_CC_EXT_MCLK0_CLK_SRC 10
+#define LPASS_AUDIO_CC_EXT_MCLK1_CLK 11
+#define LPASS_AUDIO_CC_EXT_MCLK1_CLK_SRC 12
+#define LPASS_AUDIO_CC_RX_MCLK_2X_CLK 13
+#define LPASS_AUDIO_CC_RX_MCLK_CLK 14
+#define LPASS_AUDIO_CC_RX_MCLK_CLK_SRC 15
+
+/* LPASS_AON_CC clocks */
+#define LPASS_AON_CC_PLL 0
+#define LPASS_AON_CC_PLL_OUT_EVEN 1
+#define LPASS_AON_CC_PLL_OUT_MAIN_CDIV_DIV_CLK_SRC 2
+#define LPASS_AON_CC_PLL_OUT_ODD 3
+#define LPASS_AON_CC_AUDIO_HM_H_CLK 4
+#define LPASS_AON_CC_CDIV_TX_MCLK_DIV_CLK_SRC 5
+#define LPASS_AON_CC_MAIN_RCG_CLK_SRC 6
+#define LPASS_AON_CC_TX_MCLK_2X_CLK 7
+#define LPASS_AON_CC_TX_MCLK_CLK 8
+#define LPASS_AON_CC_TX_MCLK_RCG_CLK_SRC 9
+#define LPASS_AON_CC_VA_MEM0_CLK 10
+
+/* LPASS_AON_CC power domains */
+#define LPASS_AON_CC_LPASS_AUDIO_HM_GDSC 0
+
+#endif
diff --git a/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
new file mode 100644
index 000000000000..28ed2a07aacc
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H
+#define _DT_BINDINGS_CLK_QCOM_LPASS_CORE_CC_SC7280_H
+
+/* LPASS_CORE_CC clocks */
+#define LPASS_CORE_CC_DIG_PLL 0
+#define LPASS_CORE_CC_DIG_PLL_OUT_MAIN_DIV_CLK_SRC 1
+#define LPASS_CORE_CC_DIG_PLL_OUT_ODD 2
+#define LPASS_CORE_CC_CORE_CLK 3
+#define LPASS_CORE_CC_CORE_CLK_SRC 4
+#define LPASS_CORE_CC_EXT_IF0_CLK_SRC 5
+#define LPASS_CORE_CC_EXT_IF0_IBIT_CLK 6
+#define LPASS_CORE_CC_EXT_IF1_CLK_SRC 7
+#define LPASS_CORE_CC_EXT_IF1_IBIT_CLK 8
+#define LPASS_CORE_CC_LPM_CORE_CLK 9
+#define LPASS_CORE_CC_LPM_MEM0_CORE_CLK 10
+#define LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK 11
+
+/* LPASS_CORE_CC power domains */
+#define LPASS_CORE_CC_LPASS_CORE_HM_GDSC 0
+
+#endif
diff --git a/include/dt-bindings/clock/r8a779g0-cpg-mssr.h b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
new file mode 100644
index 000000000000..754c54a6eb06
--- /dev/null
+++ b/include/dt-bindings/clock/r8a779g0-cpg-mssr.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a779g0 CPG Core Clocks */
+
+#define R8A779G0_CLK_ZX 0
+#define R8A779G0_CLK_ZS 1
+#define R8A779G0_CLK_ZT 2
+#define R8A779G0_CLK_ZTR 3
+#define R8A779G0_CLK_S0D2 4
+#define R8A779G0_CLK_S0D3 5
+#define R8A779G0_CLK_S0D4 6
+#define R8A779G0_CLK_S0D1_VIO 7
+#define R8A779G0_CLK_S0D2_VIO 8
+#define R8A779G0_CLK_S0D4_VIO 9
+#define R8A779G0_CLK_S0D8_VIO 10
+#define R8A779G0_CLK_S0D1_VC 11
+#define R8A779G0_CLK_S0D2_VC 12
+#define R8A779G0_CLK_S0D4_VC 13
+#define R8A779G0_CLK_S0D2_MM 14
+#define R8A779G0_CLK_S0D4_MM 15
+#define R8A779G0_CLK_S0D2_U3DG 16
+#define R8A779G0_CLK_S0D4_U3DG 17
+#define R8A779G0_CLK_S0D2_RT 18
+#define R8A779G0_CLK_S0D3_RT 19
+#define R8A779G0_CLK_S0D4_RT 20
+#define R8A779G0_CLK_S0D6_RT 21
+#define R8A779G0_CLK_S0D24_RT 22
+#define R8A779G0_CLK_S0D2_PER 23
+#define R8A779G0_CLK_S0D3_PER 24
+#define R8A779G0_CLK_S0D4_PER 25
+#define R8A779G0_CLK_S0D6_PER 26
+#define R8A779G0_CLK_S0D12_PER 27
+#define R8A779G0_CLK_S0D24_PER 28
+#define R8A779G0_CLK_S0D1_HSC 29
+#define R8A779G0_CLK_S0D2_HSC 30
+#define R8A779G0_CLK_S0D4_HSC 31
+#define R8A779G0_CLK_S0D2_CC 32
+#define R8A779G0_CLK_SVD1_IR 33
+#define R8A779G0_CLK_SVD2_IR 34
+#define R8A779G0_CLK_SVD1_VIP 35
+#define R8A779G0_CLK_SVD2_VIP 36
+#define R8A779G0_CLK_CL 37
+#define R8A779G0_CLK_CL16M 38
+#define R8A779G0_CLK_CL16M_MM 39
+#define R8A779G0_CLK_CL16M_RT 40
+#define R8A779G0_CLK_CL16M_PER 41
+#define R8A779G0_CLK_CL16M_HSC 42
+#define R8A779G0_CLK_Z0 43
+#define R8A779G0_CLK_ZB3 44
+#define R8A779G0_CLK_ZB3D2 45
+#define R8A779G0_CLK_ZB3D4 46
+#define R8A779G0_CLK_ZG 47
+#define R8A779G0_CLK_SD0H 48
+#define R8A779G0_CLK_SD0 49
+#define R8A779G0_CLK_RPC 50
+#define R8A779G0_CLK_RPCD2 51
+#define R8A779G0_CLK_MSO 52
+#define R8A779G0_CLK_CANFD 53
+#define R8A779G0_CLK_CSI 54
+#define R8A779G0_CLK_FRAY 55
+#define R8A779G0_CLK_IPC 56
+#define R8A779G0_CLK_SASYNCRT 57
+#define R8A779G0_CLK_SASYNCPERD1 58
+#define R8A779G0_CLK_SASYNCPERD2 59
+#define R8A779G0_CLK_SASYNCPERD4 60
+#define R8A779G0_CLK_VIOBUS 61
+#define R8A779G0_CLK_VIOBUSD2 62
+#define R8A779G0_CLK_VCBUS 63
+#define R8A779G0_CLK_VCBUSD2 64
+#define R8A779G0_CLK_DSIEXT 65
+#define R8A779G0_CLK_DSIREF 66
+#define R8A779G0_CLK_ADGH 67
+#define R8A779G0_CLK_OSC 68
+#define R8A779G0_CLK_ZR0 69
+#define R8A779G0_CLK_ZR1 70
+#define R8A779G0_CLK_ZR2 71
+#define R8A779G0_CLK_IMPA 72
+#define R8A779G0_CLK_IMPAD4 73
+#define R8A779G0_CLK_CPEX 74
+#define R8A779G0_CLK_CBFUSA 75
+#define R8A779G0_CLK_R 76
+
+#endif /* __DT_BINDINGS_CLOCK_R8A779G0_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-bindings/clock/r9a07g043-cpg.h
new file mode 100644
index 000000000000..27e232733096
--- /dev/null
+++ b/include/dt-bindings/clock/r9a07g043-cpg.h
@@ -0,0 +1,184 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__
+#define __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R9A07G043 CPG Core Clocks */
+#define R9A07G043_CLK_I 0
+#define R9A07G043_CLK_I2 1
+#define R9A07G043_CLK_S0 2
+#define R9A07G043_CLK_SPI0 3
+#define R9A07G043_CLK_SPI1 4
+#define R9A07G043_CLK_SD0 5
+#define R9A07G043_CLK_SD1 6
+#define R9A07G043_CLK_M0 7
+#define R9A07G043_CLK_M2 8
+#define R9A07G043_CLK_M3 9
+#define R9A07G043_CLK_HP 10
+#define R9A07G043_CLK_TSU 11
+#define R9A07G043_CLK_ZT 12
+#define R9A07G043_CLK_P0 13
+#define R9A07G043_CLK_P1 14
+#define R9A07G043_CLK_P2 15
+#define R9A07G043_CLK_AT 16
+#define R9A07G043_OSCCLK 17
+#define R9A07G043_CLK_P0_DIV2 18
+
+/* R9A07G043 Module Clocks */
+#define R9A07G043_CA55_SCLK 0 /* RZ/G2UL Only */
+#define R9A07G043_CA55_PCLK 1 /* RZ/G2UL Only */
+#define R9A07G043_CA55_ATCLK 2 /* RZ/G2UL Only */
+#define R9A07G043_CA55_GICCLK 3 /* RZ/G2UL Only */
+#define R9A07G043_CA55_PERICLK 4 /* RZ/G2UL Only */
+#define R9A07G043_CA55_ACLK 5 /* RZ/G2UL Only */
+#define R9A07G043_CA55_TSCLK 6 /* RZ/G2UL Only */
+#define R9A07G043_GIC600_GICCLK 7 /* RZ/G2UL Only */
+#define R9A07G043_IA55_CLK 8 /* RZ/G2UL Only */
+#define R9A07G043_IA55_PCLK 9 /* RZ/G2UL Only */
+#define R9A07G043_MHU_PCLK 10 /* RZ/G2UL Only */
+#define R9A07G043_SYC_CNT_CLK 11
+#define R9A07G043_DMAC_ACLK 12
+#define R9A07G043_DMAC_PCLK 13
+#define R9A07G043_OSTM0_PCLK 14
+#define R9A07G043_OSTM1_PCLK 15
+#define R9A07G043_OSTM2_PCLK 16
+#define R9A07G043_MTU_X_MCK_MTU3 17
+#define R9A07G043_POE3_CLKM_POE 18
+#define R9A07G043_WDT0_PCLK 19
+#define R9A07G043_WDT0_CLK 20
+#define R9A07G043_WDT2_PCLK 21 /* RZ/G2UL Only */
+#define R9A07G043_WDT2_CLK 22 /* RZ/G2UL Only */
+#define R9A07G043_SPI_CLK2 23
+#define R9A07G043_SPI_CLK 24
+#define R9A07G043_SDHI0_IMCLK 25
+#define R9A07G043_SDHI0_IMCLK2 26
+#define R9A07G043_SDHI0_CLK_HS 27
+#define R9A07G043_SDHI0_ACLK 28
+#define R9A07G043_SDHI1_IMCLK 29
+#define R9A07G043_SDHI1_IMCLK2 30
+#define R9A07G043_SDHI1_CLK_HS 31
+#define R9A07G043_SDHI1_ACLK 32
+#define R9A07G043_ISU_ACLK 33 /* RZ/G2UL Only */
+#define R9A07G043_ISU_PCLK 34 /* RZ/G2UL Only */
+#define R9A07G043_CRU_SYSCLK 35 /* RZ/G2UL Only */
+#define R9A07G043_CRU_VCLK 36 /* RZ/G2UL Only */
+#define R9A07G043_CRU_PCLK 37 /* RZ/G2UL Only */
+#define R9A07G043_CRU_ACLK 38 /* RZ/G2UL Only */
+#define R9A07G043_LCDC_CLK_A 39 /* RZ/G2UL Only */
+#define R9A07G043_LCDC_CLK_P 40 /* RZ/G2UL Only */
+#define R9A07G043_LCDC_CLK_D 41 /* RZ/G2UL Only */
+#define R9A07G043_SSI0_PCLK2 42
+#define R9A07G043_SSI0_PCLK_SFR 43
+#define R9A07G043_SSI1_PCLK2 44
+#define R9A07G043_SSI1_PCLK_SFR 45
+#define R9A07G043_SSI2_PCLK2 46
+#define R9A07G043_SSI2_PCLK_SFR 47
+#define R9A07G043_SSI3_PCLK2 48
+#define R9A07G043_SSI3_PCLK_SFR 49
+#define R9A07G043_SRC_CLKP 50 /* RZ/G2UL Only */
+#define R9A07G043_USB_U2H0_HCLK 51
+#define R9A07G043_USB_U2H1_HCLK 52
+#define R9A07G043_USB_U2P_EXR_CPUCLK 53
+#define R9A07G043_USB_PCLK 54
+#define R9A07G043_ETH0_CLK_AXI 55
+#define R9A07G043_ETH0_CLK_CHI 56
+#define R9A07G043_ETH1_CLK_AXI 57
+#define R9A07G043_ETH1_CLK_CHI 58
+#define R9A07G043_I2C0_PCLK 59
+#define R9A07G043_I2C1_PCLK 60
+#define R9A07G043_I2C2_PCLK 61
+#define R9A07G043_I2C3_PCLK 62
+#define R9A07G043_SCIF0_CLK_PCK 63
+#define R9A07G043_SCIF1_CLK_PCK 64
+#define R9A07G043_SCIF2_CLK_PCK 65
+#define R9A07G043_SCIF3_CLK_PCK 66
+#define R9A07G043_SCIF4_CLK_PCK 67
+#define R9A07G043_SCI0_CLKP 68
+#define R9A07G043_SCI1_CLKP 69
+#define R9A07G043_IRDA_CLKP 70
+#define R9A07G043_RSPI0_CLKB 71
+#define R9A07G043_RSPI1_CLKB 72
+#define R9A07G043_RSPI2_CLKB 73
+#define R9A07G043_CANFD_PCLK 74
+#define R9A07G043_GPIO_HCLK 75
+#define R9A07G043_ADC_ADCLK 76
+#define R9A07G043_ADC_PCLK 77
+#define R9A07G043_TSU_PCLK 78
+
+/* R9A07G043 Resets */
+#define R9A07G043_CA55_RST_1_0 0 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_1_1 1 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_3_0 2 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_3_1 3 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_4 4 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_5 5 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_6 6 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_7 7 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_8 8 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_9 9 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_10 10 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_11 11 /* RZ/G2UL Only */
+#define R9A07G043_CA55_RST_12 12 /* RZ/G2UL Only */
+#define R9A07G043_GIC600_GICRESET_N 13 /* RZ/G2UL Only */
+#define R9A07G043_GIC600_DBG_GICRESET_N 14 /* RZ/G2UL Only */
+#define R9A07G043_IA55_RESETN 15 /* RZ/G2UL Only */
+#define R9A07G043_MHU_RESETN 16 /* RZ/G2UL Only */
+#define R9A07G043_DMAC_ARESETN 17
+#define R9A07G043_DMAC_RST_ASYNC 18
+#define R9A07G043_SYC_RESETN 19
+#define R9A07G043_OSTM0_PRESETZ 20
+#define R9A07G043_OSTM1_PRESETZ 21
+#define R9A07G043_OSTM2_PRESETZ 22
+#define R9A07G043_MTU_X_PRESET_MTU3 23
+#define R9A07G043_POE3_RST_M_REG 24
+#define R9A07G043_WDT0_PRESETN 25
+#define R9A07G043_WDT2_PRESETN 26 /* RZ/G2UL Only */
+#define R9A07G043_SPI_RST 27
+#define R9A07G043_SDHI0_IXRST 28
+#define R9A07G043_SDHI1_IXRST 29
+#define R9A07G043_ISU_ARESETN 30 /* RZ/G2UL Only */
+#define R9A07G043_ISU_PRESETN 31 /* RZ/G2UL Only */
+#define R9A07G043_CRU_CMN_RSTB 32 /* RZ/G2UL Only */
+#define R9A07G043_CRU_PRESETN 33 /* RZ/G2UL Only */
+#define R9A07G043_CRU_ARESETN 34 /* RZ/G2UL Only */
+#define R9A07G043_LCDC_RESET_N 35 /* RZ/G2UL Only */
+#define R9A07G043_SSI0_RST_M2_REG 36
+#define R9A07G043_SSI1_RST_M2_REG 37
+#define R9A07G043_SSI2_RST_M2_REG 38
+#define R9A07G043_SSI3_RST_M2_REG 39
+#define R9A07G043_SRC_RST 40 /* RZ/G2UL Only */
+#define R9A07G043_USB_U2H0_HRESETN 41
+#define R9A07G043_USB_U2H1_HRESETN 42
+#define R9A07G043_USB_U2P_EXL_SYSRST 43
+#define R9A07G043_USB_PRESETN 44
+#define R9A07G043_ETH0_RST_HW_N 45
+#define R9A07G043_ETH1_RST_HW_N 46
+#define R9A07G043_I2C0_MRST 47
+#define R9A07G043_I2C1_MRST 48
+#define R9A07G043_I2C2_MRST 49
+#define R9A07G043_I2C3_MRST 50
+#define R9A07G043_SCIF0_RST_SYSTEM_N 51
+#define R9A07G043_SCIF1_RST_SYSTEM_N 52
+#define R9A07G043_SCIF2_RST_SYSTEM_N 53
+#define R9A07G043_SCIF3_RST_SYSTEM_N 54
+#define R9A07G043_SCIF4_RST_SYSTEM_N 55
+#define R9A07G043_SCI0_RST 56
+#define R9A07G043_SCI1_RST 57
+#define R9A07G043_IRDA_RST 58
+#define R9A07G043_RSPI0_RST 59
+#define R9A07G043_RSPI1_RST 60
+#define R9A07G043_RSPI2_RST 61
+#define R9A07G043_CANFD_RSTP_N 62
+#define R9A07G043_CANFD_RSTC_N 63
+#define R9A07G043_GPIO_RSTN 64
+#define R9A07G043_GPIO_PORT_RESETN 65
+#define R9A07G043_GPIO_SPARE_RESETN 66
+#define R9A07G043_ADC_PRESETN 67
+#define R9A07G043_ADC_ADRST_N 68
+#define R9A07G043_TSU_PRESETN 69
+
+#endif /* __DT_BINDINGS_CLOCK_R9A07G043_CPG_H__ */
diff --git a/include/dt-bindings/clock/r9a09g011-cpg.h b/include/dt-bindings/clock/r9a09g011-cpg.h
new file mode 100644
index 000000000000..41dd585d7115
--- /dev/null
+++ b/include/dt-bindings/clock/r9a09g011-cpg.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__
+#define __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* Module Clocks */
+#define R9A09G011_SYS_CLK 0
+#define R9A09G011_PFC_PCLK 1
+#define R9A09G011_PMC_CORE_CLOCK 2
+#define R9A09G011_GIC_CLK 3
+#define R9A09G011_RAMA_ACLK 4
+#define R9A09G011_ROMA_ACLK 5
+#define R9A09G011_SEC_ACLK 6
+#define R9A09G011_SEC_PCLK 7
+#define R9A09G011_SEC_TCLK 8
+#define R9A09G011_DMAA_ACLK 9
+#define R9A09G011_TSU0_PCLK 10
+#define R9A09G011_TSU1_PCLK 11
+
+#define R9A09G011_CST_TRACECLK 12
+#define R9A09G011_CST_SB_CLK 13
+#define R9A09G011_CST_AHB_CLK 14
+#define R9A09G011_CST_ATB_SB_CLK 15
+#define R9A09G011_CST_TS_SB_CLK 16
+
+#define R9A09G011_SDI0_ACLK 17
+#define R9A09G011_SDI0_IMCLK 18
+#define R9A09G011_SDI0_IMCLK2 19
+#define R9A09G011_SDI0_CLK_HS 20
+#define R9A09G011_SDI1_ACLK 21
+#define R9A09G011_SDI1_IMCLK 22
+#define R9A09G011_SDI1_IMCLK2 23
+#define R9A09G011_SDI1_CLK_HS 24
+#define R9A09G011_EMM_ACLK 25
+#define R9A09G011_EMM_IMCLK 26
+#define R9A09G011_EMM_IMCLK2 27
+#define R9A09G011_EMM_CLK_HS 28
+#define R9A09G011_NFI_ACLK 29
+#define R9A09G011_NFI_NF_CLK 30
+
+#define R9A09G011_PCI_ACLK 31
+#define R9A09G011_PCI_CLK_PMU 32
+#define R9A09G011_PCI_APB_CLK 33
+#define R9A09G011_USB_ACLK_H 34
+#define R9A09G011_USB_ACLK_P 35
+#define R9A09G011_USB_PCLK 36
+#define R9A09G011_ETH0_CLK_AXI 37
+#define R9A09G011_ETH0_CLK_CHI 38
+#define R9A09G011_ETH0_GPTP_EXT 39
+
+#define R9A09G011_SDT_CLK 40
+#define R9A09G011_SDT_CLKAPB 41
+#define R9A09G011_SDT_CLK48 42
+#define R9A09G011_GRP_CLK 43
+#define R9A09G011_CIF_P0_CLK 44
+#define R9A09G011_CIF_P1_CLK 45
+#define R9A09G011_CIF_APB_CLK 46
+#define R9A09G011_DCI_CLKAXI 47
+#define R9A09G011_DCI_CLKAPB 48
+#define R9A09G011_DCI_CLKDCI2 49
+
+#define R9A09G011_HMI_PCLK 50
+#define R9A09G011_LCI_PCLK 51
+#define R9A09G011_LCI_ACLK 52
+#define R9A09G011_LCI_VCLK 53
+#define R9A09G011_LCI_LPCLK 54
+
+#define R9A09G011_AUI_CLK 55
+#define R9A09G011_AUI_CLKAXI 56
+#define R9A09G011_AUI_CLKAPB 57
+#define R9A09G011_AUMCLK 58
+#define R9A09G011_GMCLK0 59
+#define R9A09G011_GMCLK1 60
+#define R9A09G011_MTR_CLK0 61
+#define R9A09G011_MTR_CLK1 62
+#define R9A09G011_MTR_CLKAPB 63
+#define R9A09G011_GFT_CLK 64
+#define R9A09G011_GFT_CLKAPB 65
+#define R9A09G011_GFT_MCLK 66
+
+#define R9A09G011_ATGA_CLK 67
+#define R9A09G011_ATGA_CLKAPB 68
+#define R9A09G011_ATGB_CLK 69
+#define R9A09G011_ATGB_CLKAPB 70
+#define R9A09G011_SYC_CNT_CLK 71
+
+#define R9A09G011_CPERI_GRPA_PCLK 72
+#define R9A09G011_TIM0_CLK 73
+#define R9A09G011_TIM1_CLK 74
+#define R9A09G011_TIM2_CLK 75
+#define R9A09G011_TIM3_CLK 76
+#define R9A09G011_TIM4_CLK 77
+#define R9A09G011_TIM5_CLK 78
+#define R9A09G011_TIM6_CLK 79
+#define R9A09G011_TIM7_CLK 80
+#define R9A09G011_IIC_PCLK0 81
+
+#define R9A09G011_CPERI_GRPB_PCLK 82
+#define R9A09G011_TIM8_CLK 83
+#define R9A09G011_TIM9_CLK 84
+#define R9A09G011_TIM10_CLK 85
+#define R9A09G011_TIM11_CLK 86
+#define R9A09G011_TIM12_CLK 87
+#define R9A09G011_TIM13_CLK 88
+#define R9A09G011_TIM14_CLK 89
+#define R9A09G011_TIM15_CLK 90
+#define R9A09G011_IIC_PCLK1 91
+
+#define R9A09G011_CPERI_GRPC_PCLK 92
+#define R9A09G011_TIM16_CLK 93
+#define R9A09G011_TIM17_CLK 94
+#define R9A09G011_TIM18_CLK 95
+#define R9A09G011_TIM19_CLK 96
+#define R9A09G011_TIM20_CLK 97
+#define R9A09G011_TIM21_CLK 98
+#define R9A09G011_TIM22_CLK 99
+#define R9A09G011_TIM23_CLK 100
+#define R9A09G011_WDT0_PCLK 101
+#define R9A09G011_WDT0_CLK 102
+#define R9A09G011_WDT1_PCLK 103
+#define R9A09G011_WDT1_CLK 104
+
+#define R9A09G011_CPERI_GRPD_PCLK 105
+#define R9A09G011_TIM24_CLK 106
+#define R9A09G011_TIM25_CLK 107
+#define R9A09G011_TIM26_CLK 108
+#define R9A09G011_TIM27_CLK 109
+#define R9A09G011_TIM28_CLK 110
+#define R9A09G011_TIM29_CLK 111
+#define R9A09G011_TIM30_CLK 112
+#define R9A09G011_TIM31_CLK 113
+
+#define R9A09G011_CPERI_GRPE_PCLK 114
+#define R9A09G011_PWM0_CLK 115
+#define R9A09G011_PWM1_CLK 116
+#define R9A09G011_PWM2_CLK 117
+#define R9A09G011_PWM3_CLK 118
+#define R9A09G011_PWM4_CLK 119
+#define R9A09G011_PWM5_CLK 120
+#define R9A09G011_PWM6_CLK 121
+#define R9A09G011_PWM7_CLK 122
+
+#define R9A09G011_CPERI_GRPF_PCLK 123
+#define R9A09G011_PWM8_CLK 124
+#define R9A09G011_PWM9_CLK 125
+#define R9A09G011_PWM10_CLK 126
+#define R9A09G011_PWM11_CLK 127
+#define R9A09G011_PWM12_CLK 128
+#define R9A09G011_PWM13_CLK 129
+#define R9A09G011_PWM14_CLK 130
+#define R9A09G011_PWM15_CLK 131
+
+#define R9A09G011_CPERI_GRPG_PCLK 132
+#define R9A09G011_CPERI_GRPH_PCLK 133
+#define R9A09G011_URT_PCLK 134
+#define R9A09G011_URT0_CLK 135
+#define R9A09G011_URT1_CLK 136
+#define R9A09G011_CSI0_CLK 137
+#define R9A09G011_CSI1_CLK 138
+#define R9A09G011_CSI2_CLK 139
+#define R9A09G011_CSI3_CLK 140
+#define R9A09G011_CSI4_CLK 141
+#define R9A09G011_CSI5_CLK 142
+
+#define R9A09G011_ICB_ACLK1 143
+#define R9A09G011_ICB_GIC_CLK 144
+#define R9A09G011_ICB_MPCLK1 145
+#define R9A09G011_ICB_SPCLK1 146
+#define R9A09G011_ICB_CLK48 147
+#define R9A09G011_ICB_CLK48_2 148
+#define R9A09G011_ICB_CLK48_3 149
+#define R9A09G011_ICB_CLK48_4L 150
+#define R9A09G011_ICB_CLK48_4R 151
+#define R9A09G011_ICB_CLK48_5 152
+#define R9A09G011_ICB_CST_ATB_SB_CLK 153
+#define R9A09G011_ICB_CST_CS_CLK 154
+#define R9A09G011_ICB_CLK100_1 155
+#define R9A09G011_ICB_ETH0_CLK_AXI 156
+#define R9A09G011_ICB_DCI_CLKAXI 157
+#define R9A09G011_ICB_SYC_CNT_CLK 158
+
+#define R9A09G011_ICB_DRPA_ACLK 159
+#define R9A09G011_ICB_RFX_ACLK 160
+#define R9A09G011_ICB_RFX_PCLK5 161
+#define R9A09G011_ICB_MMC_ACLK 162
+
+#define R9A09G011_ICB_MPCLK3 163
+#define R9A09G011_ICB_CIMA_CLK 164
+#define R9A09G011_ICB_CIMB_CLK 165
+#define R9A09G011_ICB_BIMA_CLK 166
+#define R9A09G011_ICB_FCD_CLKAXI 167
+#define R9A09G011_ICB_VD_ACLK4 168
+#define R9A09G011_ICB_MPCLK4 169
+#define R9A09G011_ICB_VCD_PCLK4 170
+
+#define R9A09G011_CA53_CLK 171
+#define R9A09G011_CA53_ACLK 172
+#define R9A09G011_CA53_APCLK_DBG 173
+#define R9A09G011_CST_APB_CA53_CLK 174
+#define R9A09G011_CA53_ATCLK 175
+#define R9A09G011_CST_CS_CLK 176
+#define R9A09G011_CA53_TSCLK 177
+#define R9A09G011_CST_TS_CLK 178
+#define R9A09G011_CA53_APCLK_REG 179
+
+#define R9A09G011_DRPA_ACLK 180
+#define R9A09G011_DRPA_DCLK 181
+#define R9A09G011_DRPA_INITCLK 182
+
+#define R9A09G011_RAMB0_ACLK 183
+#define R9A09G011_RAMB1_ACLK 184
+#define R9A09G011_RAMB2_ACLK 185
+#define R9A09G011_RAMB3_ACLK 186
+
+#define R9A09G011_CIMA_CLKAPB 187
+#define R9A09G011_CIMA_CLK 188
+#define R9A09G011_CIMB_CLK 189
+#define R9A09G011_FAFA_CLK 190
+#define R9A09G011_STG_CLKAXI 191
+#define R9A09G011_STG_CLK0 192
+
+#define R9A09G011_BIMA_CLKAPB 193
+#define R9A09G011_BIMA_CLK 194
+#define R9A09G011_FAFB_CLK 195
+#define R9A09G011_FCD_CLK 196
+#define R9A09G011_FCD_CLKAXI 197
+
+#define R9A09G011_RIM_CLK 198
+#define R9A09G011_VCD_ACLK 199
+#define R9A09G011_VCD_PCLK 200
+#define R9A09G011_JPG0_CLK 201
+#define R9A09G011_JPG0_ACLK 202
+
+#define R9A09G011_MMC_CORE_DDRC_CLK 203
+#define R9A09G011_MMC_ACLK 204
+#define R9A09G011_MMC_PCLK 205
+#define R9A09G011_DDI_APBCLK 206
+
+/* Resets */
+#define R9A09G011_SYS_RST_N 0
+#define R9A09G011_PFC_PRESETN 1
+#define R9A09G011_RAMA_ARESETN 2
+#define R9A09G011_ROM_ARESETN 3
+#define R9A09G011_DMAA_ARESETN 4
+#define R9A09G011_SEC_ARESETN 5
+#define R9A09G011_SEC_PRESETN 6
+#define R9A09G011_SEC_RSTB 7
+#define R9A09G011_TSU0_RESETN 8
+#define R9A09G011_TSU1_RESETN 9
+#define R9A09G011_PMC_RESET_N 10
+
+#define R9A09G011_CST_NTRST 11
+#define R9A09G011_CST_NPOTRST 12
+#define R9A09G011_CST_NTRST2 13
+#define R9A09G011_CST_CS_RESETN 14
+#define R9A09G011_CST_TS_RESETN 15
+#define R9A09G011_CST_TRESETN 16
+#define R9A09G011_CST_SB_RESETN 17
+#define R9A09G011_CST_AHB_RESETN 18
+#define R9A09G011_CST_TS_SB_RESETN 19
+#define R9A09G011_CST_APB_CA53_RESETN 20
+#define R9A09G011_CST_ATB_SB_RESETN 21
+
+#define R9A09G011_SDI0_IXRST 22
+#define R9A09G011_SDI1_IXRST 23
+#define R9A09G011_EMM_IXRST 24
+#define R9A09G011_NFI_MARESETN 25
+#define R9A09G011_NFI_REG_RST_N 26
+#define R9A09G011_USB_PRESET_N 27
+#define R9A09G011_USB_DRD_RESET 28
+#define R9A09G011_USB_ARESETN_P 29
+#define R9A09G011_USB_ARESETN_H 30
+#define R9A09G011_ETH0_RST_HW_N 31
+#define R9A09G011_PCI_ARESETN 32
+
+#define R9A09G011_SDT_RSTSYSAX 33
+#define R9A09G011_GRP_RESETN 34
+#define R9A09G011_CIF_RST_N 35
+#define R9A09G011_DCU_RSTSYSAX 36
+#define R9A09G011_HMI_RST_N 37
+#define R9A09G011_HMI_PRESETN 38
+#define R9A09G011_LCI_PRESETN 39
+#define R9A09G011_LCI_ARESETN 40
+
+#define R9A09G011_AUI_RSTSYSAX 41
+#define R9A09G011_MTR_RSTSYSAX 42
+#define R9A09G011_GFT_RSTSYSAX 43
+#define R9A09G011_ATGA_RSTSYSAX 44
+#define R9A09G011_ATGB_RSTSYSAX 45
+#define R9A09G011_SYC_RST_N 46
+
+#define R9A09G011_TIM_GPA_PRESETN 47
+#define R9A09G011_TIM_GPB_PRESETN 48
+#define R9A09G011_TIM_GPC_PRESETN 49
+#define R9A09G011_TIM_GPD_PRESETN 50
+#define R9A09G011_PWM_GPE_PRESETN 51
+#define R9A09G011_PWM_GPF_PRESETN 52
+#define R9A09G011_CSI_GPG_PRESETN 53
+#define R9A09G011_CSI_GPH_PRESETN 54
+#define R9A09G011_IIC_GPA_PRESETN 55
+#define R9A09G011_IIC_GPB_PRESETN 56
+#define R9A09G011_URT_PRESETN 57
+#define R9A09G011_WDT0_PRESETN 58
+#define R9A09G011_WDT1_PRESETN 59
+
+#define R9A09G011_ICB_PD_AWO_RST_N 60
+#define R9A09G011_ICB_PD_MMC_RST_N 61
+#define R9A09G011_ICB_PD_VD0_RST_N 62
+#define R9A09G011_ICB_PD_VD1_RST_N 63
+#define R9A09G011_ICB_PD_RFX_RST_N 64
+
+#define R9A09G011_CA53_NCPUPORESET0 65
+#define R9A09G011_CA53_NCPUPORESET1 66
+#define R9A09G011_CA53_NCORERESET0 67
+#define R9A09G011_CA53_NCORERESET1 68
+#define R9A09G011_CA53_NPRESETDBG 69
+#define R9A09G011_CA53_L2RESET 70
+#define R9A09G011_CA53_NMISCRESET_HM 71
+#define R9A09G011_CA53_NMISCRESET_SM 72
+#define R9A09G011_CA53_NARESET 73
+
+#define R9A09G011_DRPA_ARESETN 74
+
+#define R9A09G011_RAMB0_ARESETN 75
+#define R9A09G011_RAMB1_ARESETN 76
+#define R9A09G011_RAMB2_ARESETN 77
+#define R9A09G011_RAMB3_ARESETN 78
+
+#define R9A09G011_CIMA_RSTSYSAX 79
+#define R9A09G011_CIMB_RSTSYSAX 80
+#define R9A09G011_FAFA_RSTSYSAX 81
+#define R9A09G011_STG_RSTSYSAX 82
+
+#define R9A09G011_BIMA_RSTSYSAX 83
+#define R9A09G011_FAFB_RSTSYSAX 84
+#define R9A09G011_FCD_RSTSYSAX 85
+#define R9A09G011_RIM_RSTSYSAX 86
+#define R9A09G011_VCD_RESETN 87
+#define R9A09G011_JPG_XRESET 88
+
+#define R9A09G011_MMC_CORE_DDRC_RSTN 89
+#define R9A09G011_MMC_ARESETN_N 90
+#define R9A09G011_MMC_PRESETN 91
+#define R9A09G011_DDI_PWROK 92
+#define R9A09G011_DDI_RESET 93
+#define R9A09G011_DDI_RESETN_APB 94
+
+#endif /* __DT_BINDINGS_CLOCK_R9A09G011_CPG_H__ */
diff --git a/include/dt-bindings/clock/samsung,exynosautov9.h b/include/dt-bindings/clock/samsung,exynosautov9.h
new file mode 100644
index 000000000000..71ec0a955364
--- /dev/null
+++ b/include/dt-bindings/clock/samsung,exynosautov9.h
@@ -0,0 +1,299 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022 Samsung Electronics Co., Ltd.
+ * Author: Chanho Park <chanho61.park@samsung.com>
+ *
+ * Device Tree binding constants for Exynos Auto V9 clock controller.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H
+#define _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H
+
+/* CMU_TOP */
+#define FOUT_SHARED0_PLL 1
+#define FOUT_SHARED1_PLL 2
+#define FOUT_SHARED2_PLL 3
+#define FOUT_SHARED3_PLL 4
+#define FOUT_SHARED4_PLL 5
+
+/* MUX in CMU_TOP */
+#define MOUT_SHARED0_PLL 6
+#define MOUT_SHARED1_PLL 7
+#define MOUT_SHARED2_PLL 8
+#define MOUT_SHARED3_PLL 9
+#define MOUT_SHARED4_PLL 10
+#define MOUT_CLKCMU_CMU_BOOST 11
+#define MOUT_CLKCMU_CMU_CMUREF 12
+#define MOUT_CLKCMU_ACC_BUS 13
+#define MOUT_CLKCMU_APM_BUS 14
+#define MOUT_CLKCMU_AUD_CPU 15
+#define MOUT_CLKCMU_AUD_BUS 16
+#define MOUT_CLKCMU_BUSC_BUS 17
+#define MOUT_CLKCMU_BUSMC_BUS 19
+#define MOUT_CLKCMU_CORE_BUS 20
+#define MOUT_CLKCMU_CPUCL0_SWITCH 21
+#define MOUT_CLKCMU_CPUCL0_CLUSTER 22
+#define MOUT_CLKCMU_CPUCL1_SWITCH 24
+#define MOUT_CLKCMU_CPUCL1_CLUSTER 25
+#define MOUT_CLKCMU_DPTX_BUS 26
+#define MOUT_CLKCMU_DPTX_DPGTC 27
+#define MOUT_CLKCMU_DPUM_BUS 28
+#define MOUT_CLKCMU_DPUS0_BUS 29
+#define MOUT_CLKCMU_DPUS1_BUS 30
+#define MOUT_CLKCMU_FSYS0_BUS 31
+#define MOUT_CLKCMU_FSYS0_PCIE 32
+#define MOUT_CLKCMU_FSYS1_BUS 33
+#define MOUT_CLKCMU_FSYS1_USBDRD 34
+#define MOUT_CLKCMU_FSYS1_MMC_CARD 35
+#define MOUT_CLKCMU_FSYS2_BUS 36
+#define MOUT_CLKCMU_FSYS2_UFS_EMBD 37
+#define MOUT_CLKCMU_FSYS2_ETHERNET 38
+#define MOUT_CLKCMU_G2D_G2D 39
+#define MOUT_CLKCMU_G2D_MSCL 40
+#define MOUT_CLKCMU_G3D00_SWITCH 41
+#define MOUT_CLKCMU_G3D01_SWITCH 42
+#define MOUT_CLKCMU_G3D1_SWITCH 43
+#define MOUT_CLKCMU_ISPB_BUS 44
+#define MOUT_CLKCMU_MFC_MFC 45
+#define MOUT_CLKCMU_MFC_WFD 46
+#define MOUT_CLKCMU_MIF_SWITCH 47
+#define MOUT_CLKCMU_MIF_BUSP 48
+#define MOUT_CLKCMU_NPU_BUS 49
+#define MOUT_CLKCMU_PERIC0_BUS 50
+#define MOUT_CLKCMU_PERIC0_IP 51
+#define MOUT_CLKCMU_PERIC1_BUS 52
+#define MOUT_CLKCMU_PERIC1_IP 53
+#define MOUT_CLKCMU_PERIS_BUS 54
+
+/* DIV in CMU_TOP */
+#define DOUT_SHARED0_DIV3 101
+#define DOUT_SHARED0_DIV2 102
+#define DOUT_SHARED1_DIV3 103
+#define DOUT_SHARED1_DIV2 104
+#define DOUT_SHARED1_DIV4 105
+#define DOUT_SHARED2_DIV3 106
+#define DOUT_SHARED2_DIV2 107
+#define DOUT_SHARED2_DIV4 108
+#define DOUT_SHARED4_DIV2 109
+#define DOUT_SHARED4_DIV4 110
+#define DOUT_CLKCMU_CMU_BOOST 111
+#define DOUT_CLKCMU_ACC_BUS 112
+#define DOUT_CLKCMU_APM_BUS 113
+#define DOUT_CLKCMU_AUD_CPU 114
+#define DOUT_CLKCMU_AUD_BUS 115
+#define DOUT_CLKCMU_BUSC_BUS 116
+#define DOUT_CLKCMU_BUSMC_BUS 118
+#define DOUT_CLKCMU_CORE_BUS 119
+#define DOUT_CLKCMU_CPUCL0_SWITCH 120
+#define DOUT_CLKCMU_CPUCL0_CLUSTER 121
+#define DOUT_CLKCMU_CPUCL1_SWITCH 123
+#define DOUT_CLKCMU_CPUCL1_CLUSTER 124
+#define DOUT_CLKCMU_DPTX_BUS 125
+#define DOUT_CLKCMU_DPTX_DPGTC 126
+#define DOUT_CLKCMU_DPUM_BUS 127
+#define DOUT_CLKCMU_DPUS0_BUS 128
+#define DOUT_CLKCMU_DPUS1_BUS 129
+#define DOUT_CLKCMU_FSYS0_BUS 130
+#define DOUT_CLKCMU_FSYS0_PCIE 131
+#define DOUT_CLKCMU_FSYS1_BUS 132
+#define DOUT_CLKCMU_FSYS1_USBDRD 133
+#define DOUT_CLKCMU_FSYS2_BUS 134
+#define DOUT_CLKCMU_FSYS2_UFS_EMBD 135
+#define DOUT_CLKCMU_FSYS2_ETHERNET 136
+#define DOUT_CLKCMU_G2D_G2D 137
+#define DOUT_CLKCMU_G2D_MSCL 138
+#define DOUT_CLKCMU_G3D00_SWITCH 139
+#define DOUT_CLKCMU_G3D01_SWITCH 140
+#define DOUT_CLKCMU_G3D1_SWITCH 141
+#define DOUT_CLKCMU_ISPB_BUS 142
+#define DOUT_CLKCMU_MFC_MFC 143
+#define DOUT_CLKCMU_MFC_WFD 144
+#define DOUT_CLKCMU_MIF_SWITCH 145
+#define DOUT_CLKCMU_MIF_BUSP 146
+#define DOUT_CLKCMU_NPU_BUS 147
+#define DOUT_CLKCMU_PERIC0_BUS 148
+#define DOUT_CLKCMU_PERIC0_IP 149
+#define DOUT_CLKCMU_PERIC1_BUS 150
+#define DOUT_CLKCMU_PERIC1_IP 151
+#define DOUT_CLKCMU_PERIS_BUS 152
+
+/* GAT in CMU_TOP */
+#define GOUT_CLKCMU_CMU_BOOST 201
+#define GOUT_CLKCMU_CPUCL0_BOOST 202
+#define GOUT_CLKCMU_CPUCL1_BOOST 203
+#define GOUT_CLKCMU_CORE_BOOST 204
+#define GOUT_CLKCMU_BUSC_BOOST 205
+#define GOUT_CLKCMU_BUSMC_BOOST 206
+#define GOUT_CLKCMU_MIF_BOOST 207
+#define GOUT_CLKCMU_ACC_BUS 208
+#define GOUT_CLKCMU_APM_BUS 209
+#define GOUT_CLKCMU_AUD_CPU 210
+#define GOUT_CLKCMU_AUD_BUS 211
+#define GOUT_CLKCMU_BUSC_BUS 212
+#define GOUT_CLKCMU_BUSMC_BUS 214
+#define GOUT_CLKCMU_CORE_BUS 215
+#define GOUT_CLKCMU_CPUCL0_SWITCH 216
+#define GOUT_CLKCMU_CPUCL0_CLUSTER 217
+#define GOUT_CLKCMU_CPUCL1_SWITCH 219
+#define GOUT_CLKCMU_CPUCL1_CLUSTER 220
+#define GOUT_CLKCMU_DPTX_BUS 221
+#define GOUT_CLKCMU_DPTX_DPGTC 222
+#define GOUT_CLKCMU_DPUM_BUS 223
+#define GOUT_CLKCMU_DPUS0_BUS 224
+#define GOUT_CLKCMU_DPUS1_BUS 225
+#define GOUT_CLKCMU_FSYS0_BUS 226
+#define GOUT_CLKCMU_FSYS0_PCIE 227
+#define GOUT_CLKCMU_FSYS1_BUS 228
+#define GOUT_CLKCMU_FSYS1_USBDRD 229
+#define GOUT_CLKCMU_FSYS1_MMC_CARD 230
+#define GOUT_CLKCMU_FSYS2_BUS 231
+#define GOUT_CLKCMU_FSYS2_UFS_EMBD 232
+#define GOUT_CLKCMU_FSYS2_ETHERNET 233
+#define GOUT_CLKCMU_G2D_G2D 234
+#define GOUT_CLKCMU_G2D_MSCL 235
+#define GOUT_CLKCMU_G3D00_SWITCH 236
+#define GOUT_CLKCMU_G3D01_SWITCH 237
+#define GOUT_CLKCMU_G3D1_SWITCH 238
+#define GOUT_CLKCMU_ISPB_BUS 239
+#define GOUT_CLKCMU_MFC_MFC 240
+#define GOUT_CLKCMU_MFC_WFD 241
+#define GOUT_CLKCMU_MIF_SWITCH 242
+#define GOUT_CLKCMU_MIF_BUSP 243
+#define GOUT_CLKCMU_NPU_BUS 244
+#define GOUT_CLKCMU_PERIC0_BUS 245
+#define GOUT_CLKCMU_PERIC0_IP 246
+#define GOUT_CLKCMU_PERIC1_BUS 247
+#define GOUT_CLKCMU_PERIC1_IP 248
+#define GOUT_CLKCMU_PERIS_BUS 249
+
+#define TOP_NR_CLK 249
+
+/* CMU_BUSMC */
+#define CLK_MOUT_BUSMC_BUS_USER 1
+#define CLK_DOUT_BUSMC_BUSP 2
+#define CLK_GOUT_BUSMC_PDMA0_PCLK 3
+#define CLK_GOUT_BUSMC_SPDMA_PCLK 4
+
+#define BUSMC_NR_CLK 4
+
+/* CMU_CORE */
+#define CLK_MOUT_CORE_BUS_USER 1
+#define CLK_DOUT_CORE_BUSP 2
+#define CLK_GOUT_CORE_CCI_CLK 3
+#define CLK_GOUT_CORE_CCI_PCLK 4
+#define CLK_GOUT_CORE_CMU_CORE_PCLK 5
+
+#define CORE_NR_CLK 5
+
+/* CMU_FSYS2 */
+#define CLK_MOUT_FSYS2_BUS_USER 1
+#define CLK_MOUT_FSYS2_UFS_EMBD_USER 2
+#define CLK_MOUT_FSYS2_ETHERNET_USER 3
+#define CLK_GOUT_FSYS2_UFS_EMBD0_ACLK 4
+#define CLK_GOUT_FSYS2_UFS_EMBD0_UNIPRO 5
+#define CLK_GOUT_FSYS2_UFS_EMBD1_ACLK 6
+#define CLK_GOUT_FSYS2_UFS_EMBD1_UNIPRO 7
+
+#define FSYS2_NR_CLK 7
+
+/* CMU_PERIC0 */
+#define CLK_MOUT_PERIC0_BUS_USER 1
+#define CLK_MOUT_PERIC0_IP_USER 2
+#define CLK_MOUT_PERIC0_USI00_USI 3
+#define CLK_MOUT_PERIC0_USI01_USI 4
+#define CLK_MOUT_PERIC0_USI02_USI 5
+#define CLK_MOUT_PERIC0_USI03_USI 6
+#define CLK_MOUT_PERIC0_USI04_USI 7
+#define CLK_MOUT_PERIC0_USI05_USI 8
+#define CLK_MOUT_PERIC0_USI_I2C 9
+
+#define CLK_DOUT_PERIC0_USI00_USI 10
+#define CLK_DOUT_PERIC0_USI01_USI 11
+#define CLK_DOUT_PERIC0_USI02_USI 12
+#define CLK_DOUT_PERIC0_USI03_USI 13
+#define CLK_DOUT_PERIC0_USI04_USI 14
+#define CLK_DOUT_PERIC0_USI05_USI 15
+#define CLK_DOUT_PERIC0_USI_I2C 16
+
+#define CLK_GOUT_PERIC0_IPCLK_0 20
+#define CLK_GOUT_PERIC0_IPCLK_1 21
+#define CLK_GOUT_PERIC0_IPCLK_2 22
+#define CLK_GOUT_PERIC0_IPCLK_3 23
+#define CLK_GOUT_PERIC0_IPCLK_4 24
+#define CLK_GOUT_PERIC0_IPCLK_5 25
+#define CLK_GOUT_PERIC0_IPCLK_6 26
+#define CLK_GOUT_PERIC0_IPCLK_7 27
+#define CLK_GOUT_PERIC0_IPCLK_8 28
+#define CLK_GOUT_PERIC0_IPCLK_9 29
+#define CLK_GOUT_PERIC0_IPCLK_10 30
+#define CLK_GOUT_PERIC0_IPCLK_11 30
+#define CLK_GOUT_PERIC0_PCLK_0 31
+#define CLK_GOUT_PERIC0_PCLK_1 32
+#define CLK_GOUT_PERIC0_PCLK_2 33
+#define CLK_GOUT_PERIC0_PCLK_3 34
+#define CLK_GOUT_PERIC0_PCLK_4 35
+#define CLK_GOUT_PERIC0_PCLK_5 36
+#define CLK_GOUT_PERIC0_PCLK_6 37
+#define CLK_GOUT_PERIC0_PCLK_7 38
+#define CLK_GOUT_PERIC0_PCLK_8 39
+#define CLK_GOUT_PERIC0_PCLK_9 40
+#define CLK_GOUT_PERIC0_PCLK_10 41
+#define CLK_GOUT_PERIC0_PCLK_11 42
+
+#define PERIC0_NR_CLK 42
+
+/* CMU_PERIC1 */
+#define CLK_MOUT_PERIC1_BUS_USER 1
+#define CLK_MOUT_PERIC1_IP_USER 2
+#define CLK_MOUT_PERIC1_USI06_USI 3
+#define CLK_MOUT_PERIC1_USI07_USI 4
+#define CLK_MOUT_PERIC1_USI08_USI 5
+#define CLK_MOUT_PERIC1_USI09_USI 6
+#define CLK_MOUT_PERIC1_USI10_USI 7
+#define CLK_MOUT_PERIC1_USI11_USI 8
+#define CLK_MOUT_PERIC1_USI_I2C 9
+
+#define CLK_DOUT_PERIC1_USI06_USI 10
+#define CLK_DOUT_PERIC1_USI07_USI 11
+#define CLK_DOUT_PERIC1_USI08_USI 12
+#define CLK_DOUT_PERIC1_USI09_USI 13
+#define CLK_DOUT_PERIC1_USI10_USI 14
+#define CLK_DOUT_PERIC1_USI11_USI 15
+#define CLK_DOUT_PERIC1_USI_I2C 16
+
+#define CLK_GOUT_PERIC1_IPCLK_0 20
+#define CLK_GOUT_PERIC1_IPCLK_1 21
+#define CLK_GOUT_PERIC1_IPCLK_2 22
+#define CLK_GOUT_PERIC1_IPCLK_3 23
+#define CLK_GOUT_PERIC1_IPCLK_4 24
+#define CLK_GOUT_PERIC1_IPCLK_5 25
+#define CLK_GOUT_PERIC1_IPCLK_6 26
+#define CLK_GOUT_PERIC1_IPCLK_7 27
+#define CLK_GOUT_PERIC1_IPCLK_8 28
+#define CLK_GOUT_PERIC1_IPCLK_9 29
+#define CLK_GOUT_PERIC1_IPCLK_10 30
+#define CLK_GOUT_PERIC1_IPCLK_11 30
+#define CLK_GOUT_PERIC1_PCLK_0 31
+#define CLK_GOUT_PERIC1_PCLK_1 32
+#define CLK_GOUT_PERIC1_PCLK_2 33
+#define CLK_GOUT_PERIC1_PCLK_3 34
+#define CLK_GOUT_PERIC1_PCLK_4 35
+#define CLK_GOUT_PERIC1_PCLK_5 36
+#define CLK_GOUT_PERIC1_PCLK_6 37
+#define CLK_GOUT_PERIC1_PCLK_7 38
+#define CLK_GOUT_PERIC1_PCLK_8 39
+#define CLK_GOUT_PERIC1_PCLK_9 40
+#define CLK_GOUT_PERIC1_PCLK_10 41
+#define CLK_GOUT_PERIC1_PCLK_11 42
+
+#define PERIC1_NR_CLK 42
+
+/* CMU_PERIS */
+#define CLK_MOUT_PERIS_BUS_USER 1
+#define CLK_GOUT_SYSREG_PERIS_PCLK 2
+#define CLK_GOUT_WDT_CLUSTER0 3
+#define CLK_GOUT_WDT_CLUSTER1 4
+
+#define PERIS_NR_CLK 4
+
+#endif /* _DT_BINDINGS_CLOCK_EXYNOSAUTOV9_H */
diff --git a/include/dt-bindings/clock/stm32mp1-clks.h b/include/dt-bindings/clock/stm32mp1-clks.h
index e02770b98e6c..25e8cfd43459 100644
--- a/include/dt-bindings/clock/stm32mp1-clks.h
+++ b/include/dt-bindings/clock/stm32mp1-clks.h
@@ -249,30 +249,26 @@
#define STM32MP1_LAST_CLK 232
/* SCMI clock identifiers */
-#define CK_SCMI0_HSE 0
-#define CK_SCMI0_HSI 1
-#define CK_SCMI0_CSI 2
-#define CK_SCMI0_LSE 3
-#define CK_SCMI0_LSI 4
-#define CK_SCMI0_PLL2_Q 5
-#define CK_SCMI0_PLL2_R 6
-#define CK_SCMI0_MPU 7
-#define CK_SCMI0_AXI 8
-#define CK_SCMI0_BSEC 9
-#define CK_SCMI0_CRYP1 10
-#define CK_SCMI0_GPIOZ 11
-#define CK_SCMI0_HASH1 12
-#define CK_SCMI0_I2C4 13
-#define CK_SCMI0_I2C6 14
-#define CK_SCMI0_IWDG1 15
-#define CK_SCMI0_RNG1 16
-#define CK_SCMI0_RTC 17
-#define CK_SCMI0_RTCAPB 18
-#define CK_SCMI0_SPI6 19
-#define CK_SCMI0_USART1 20
-
-#define CK_SCMI1_PLL3_Q 0
-#define CK_SCMI1_PLL3_R 1
-#define CK_SCMI1_MCU 2
+#define CK_SCMI_HSE 0
+#define CK_SCMI_HSI 1
+#define CK_SCMI_CSI 2
+#define CK_SCMI_LSE 3
+#define CK_SCMI_LSI 4
+#define CK_SCMI_PLL2_Q 5
+#define CK_SCMI_PLL2_R 6
+#define CK_SCMI_MPU 7
+#define CK_SCMI_AXI 8
+#define CK_SCMI_BSEC 9
+#define CK_SCMI_CRYP1 10
+#define CK_SCMI_GPIOZ 11
+#define CK_SCMI_HASH1 12
+#define CK_SCMI_I2C4 13
+#define CK_SCMI_I2C6 14
+#define CK_SCMI_IWDG1 15
+#define CK_SCMI_RNG1 16
+#define CK_SCMI_RTC 17
+#define CK_SCMI_RTCAPB 18
+#define CK_SCMI_SPI6 19
+#define CK_SCMI_USART1 20
#endif /* _DT_BINDINGS_STM32MP1_CLKS_H_ */
diff --git a/include/dt-bindings/clock/tegra234-clock.h b/include/dt-bindings/clock/tegra234-clock.h
index 8cae969e8cba..bd4c3086a2da 100644
--- a/include/dt-bindings/clock/tegra234-clock.h
+++ b/include/dt-bindings/clock/tegra234-clock.h
@@ -140,6 +140,14 @@
#define TEGRA234_CLK_PEX2_C9_CORE 173U
/** @brief output of gate CLK_ENB_PEX2_CORE_10 */
#define TEGRA234_CLK_PEX2_C10_CORE 187U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 switch divider output */
+#define TEGRA234_CLK_QSPI0_2X_PM 192U
+/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 switch divider output */
+#define TEGRA234_CLK_QSPI1_2X_PM 193U
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI0 */
+#define TEGRA234_CLK_QSPI0_PM 194U
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI1 */
+#define TEGRA234_CLK_QSPI1_PM 195U
/** @brief CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM switch divider output */
#define TEGRA234_CLK_SDMMC_LEGACY_TM 219U
/** @brief output of gate CLK_ENB_PEX0_CORE_0 */
diff --git a/include/dt-bindings/power/imx8mp-power.h b/include/dt-bindings/power/imx8mp-power.h
index 9f90c40a2c6c..7789bcca3223 100644
--- a/include/dt-bindings/power/imx8mp-power.h
+++ b/include/dt-bindings/power/imx8mp-power.h
@@ -32,4 +32,22 @@
#define IMX8MP_HSIOBLK_PD_PCIE 3
#define IMX8MP_HSIOBLK_PD_PCIE_PHY 4
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_1 0
+#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_1 1
+#define IMX8MP_MEDIABLK_PD_LCDIF_1 2
+#define IMX8MP_MEDIABLK_PD_ISI 3
+#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2 4
+#define IMX8MP_MEDIABLK_PD_LCDIF_2 5
+#define IMX8MP_MEDIABLK_PD_ISP 6
+#define IMX8MP_MEDIABLK_PD_DWE 7
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 8
+
+#define IMX8MP_HDMIBLK_PD_IRQSTEER 0
+#define IMX8MP_HDMIBLK_PD_LCDIF 1
+#define IMX8MP_HDMIBLK_PD_PAI 2
+#define IMX8MP_HDMIBLK_PD_PVI 3
+#define IMX8MP_HDMIBLK_PD_TRNG 4
+#define IMX8MP_HDMIBLK_PD_HDMI_TX 5
+#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY 6
+
#endif
diff --git a/include/dt-bindings/power/r8a779g0-sysc.h b/include/dt-bindings/power/r8a779g0-sysc.h
new file mode 100644
index 000000000000..7daa70f1814e
--- /dev/null
+++ b/include/dt-bindings/power/r8a779g0-sysc.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A779G0_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A779G0_SYSC_H__
+
+/*
+ * These power domain indices match the Power Domain Register Numbers (PDR)
+ */
+
+#define R8A779G0_PD_A1E0D0C0 0
+#define R8A779G0_PD_A1E0D0C1 1
+#define R8A779G0_PD_A1E0D1C0 2
+#define R8A779G0_PD_A1E0D1C1 3
+#define R8A779G0_PD_A2E0D0 16
+#define R8A779G0_PD_A2E0D1 17
+#define R8A779G0_PD_A3E0 20
+#define R8A779G0_PD_A33DGA 24
+#define R8A779G0_PD_A23DGB 25
+#define R8A779G0_PD_A1DSP0 33
+#define R8A779G0_PD_A2IMP01 34
+#define R8A779G0_PD_A2PSC 35
+#define R8A779G0_PD_A2CV0 36
+#define R8A779G0_PD_A2CV1 37
+#define R8A779G0_PD_A1CNN0 41
+#define R8A779G0_PD_A2CN0 42
+#define R8A779G0_PD_A3IR 43
+#define R8A779G0_PD_A1DSP1 45
+#define R8A779G0_PD_A2IMP23 46
+#define R8A779G0_PD_A2DMA 47
+#define R8A779G0_PD_A2CV2 48
+#define R8A779G0_PD_A2CV3 49
+#define R8A779G0_PD_A1DSP2 53
+#define R8A779G0_PD_A1DSP3 54
+#define R8A779G0_PD_A3VIP0 56
+#define R8A779G0_PD_A3VIP1 57
+#define R8A779G0_PD_A3VIP2 58
+#define R8A779G0_PD_A3ISP0 60
+#define R8A779G0_PD_A3ISP1 61
+
+/* Always-on power area */
+#define R8A779G0_PD_ALWAYS_ON 64
+
+#endif /* __DT_BINDINGS_POWER_R8A779G0_SYSC_H__*/
diff --git a/include/dt-bindings/reset/mt8192-resets.h b/include/dt-bindings/reset/mt8192-resets.h
index be9a7ca245b9..764ca9910fa9 100644
--- a/include/dt-bindings/reset/mt8192-resets.h
+++ b/include/dt-bindings/reset/mt8192-resets.h
@@ -27,4 +27,7 @@
#define MT8192_TOPRGU_SW_RST_NUM 23
+/* MMSYS resets */
+#define MT8192_MMSYS_SW0_RST_B_DISP_DSI0 15
+
#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8192 */
diff --git a/include/dt-bindings/reset/stm32mp1-resets.h b/include/dt-bindings/reset/stm32mp1-resets.h
index f3a0ed317835..4ffa7c3612e6 100644
--- a/include/dt-bindings/reset/stm32mp1-resets.h
+++ b/include/dt-bindings/reset/stm32mp1-resets.h
@@ -107,17 +107,17 @@
#define GPIOK_R 19786
/* SCMI reset domain identifiers */
-#define RST_SCMI0_SPI6 0
-#define RST_SCMI0_I2C4 1
-#define RST_SCMI0_I2C6 2
-#define RST_SCMI0_USART1 3
-#define RST_SCMI0_STGEN 4
-#define RST_SCMI0_GPIOZ 5
-#define RST_SCMI0_CRYP1 6
-#define RST_SCMI0_HASH1 7
-#define RST_SCMI0_RNG1 8
-#define RST_SCMI0_MDMA 9
-#define RST_SCMI0_MCU 10
-#define RST_SCMI0_MCU_HOLD_BOOT 11
+#define RST_SCMI_SPI6 0
+#define RST_SCMI_I2C4 1
+#define RST_SCMI_I2C6 2
+#define RST_SCMI_USART1 3
+#define RST_SCMI_STGEN 4
+#define RST_SCMI_GPIOZ 5
+#define RST_SCMI_CRYP1 6
+#define RST_SCMI_HASH1 7
+#define RST_SCMI_RNG1 8
+#define RST_SCMI_MDMA 9
+#define RST_SCMI_MCU 10
+#define RST_SCMI_MCU_HOLD_BOOT 11
#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */
diff --git a/include/dt-bindings/reset/tegra234-reset.h b/include/dt-bindings/reset/tegra234-reset.h
index 1362cd5e03f0..547ca3b60caa 100644
--- a/include/dt-bindings/reset/tegra234-reset.h
+++ b/include/dt-bindings/reset/tegra234-reset.h
@@ -40,6 +40,8 @@
#define TEGRA234_RESET_PWM6 73U
#define TEGRA234_RESET_PWM7 74U
#define TEGRA234_RESET_PWM8 75U
+#define TEGRA234_RESET_QSPI0 76U
+#define TEGRA234_RESET_QSPI1 77U
#define TEGRA234_RESET_SDMMC4 85U
#define TEGRA234_RESET_UARTA 100U
#define TEGRA234_RESET_PEX0_CORE_0 116U